sim/microblaze/ChangeLog

   1 2015-11-15  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o.
   4
   5 2015-11-14  Mike Frysinger  <vapier@gentoo.org>
   6
   7         * interp.c (sim_close): Delete.
   8
   9 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
  10
  11         * configure: Regenerate.
  12
  13 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  14
  15         * configure: Regenerate.
  16
  17 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  18
  19         * configure: Regenerate.
  20
  21 2015-06-11  Mike Frysinger  <vapier@gentoo.org>
  22
  23         * Makefile.in (SIM_OBJS): Add sim-resume.o.
  24         * interp.c (sim_resume): rename to ...
  25         (sim_engine_run): ... this.  Change CPU.exception setting to
  26         sim_engine_halt calls.  Change do/while to while(1).  Call
  27         sim_events_process when sim_events_tick is true.
  28         (sim_stop_reason): Delete.
  29         * sim-main.h (microblaze_regset): Delete exception member.
  30
  31 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
  32
  33         * sim-main.h (SIM_CPU): Delete.
  34
  35 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
  36
  37         * sim-main.h (sim_cia): Delete.
  38
  39 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
  40
  41         * interp.c (issue_messages, wbat, wlat, what, rbat, rlat, rhat,
  42         sim_memory_size, MEM_SIZE_FLOOR, sim_size, init_pointers, sim_write,
  43         sim_read, sim_do_command): Delete.
  44         (set_initial_gprs): Delete memsize and call to init_pointers.
  45         (sim_resume): Change rlat to MEM_RD_WORD.  Change issue_messages to
  46         STATE_VERBOSE_P.
  47         (sim_store_register, sim_fetch_register): Drop call to init_pointers.
  48         (sim_open): Drop issue_messages setup.  Delete osize and call to
  49         sim_size.  Call sim_do_commandf to set the memory size.
  50         * microblaze.h (MEM): Delete.
  51         (MEM_RD_BYTE): Change rbat to sim_core_read_1.
  52         (MEM_RD_HALF): Change rhat to sim_core_read_2.
  53         (MEM_RD_WORD): Change rlat to sim_core_read_4.
  54         (MEM_WR_BYTE): Change wbat to sim_core_write_1.
  55         (MEM_WR_HALF): Change what to sim_core_write_2.
  56         (MEM_WR_WORD): Change wlat to sim_core_write_4.
  57         * sim-main.h (microblaze_regset): Delete msize and memory.
  58
  59 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
  60
  61         * sim-main.h (CIA_GET, CIA_SET): Delete.
  62
  63 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
  64
  65         * interp.c (microblaze_pc_get, microblaze_pc_set): New functions.
  66         (sim_open): Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.
  67
  68 2015-04-15  Mike Frysinger  <vapier@gentoo.org>
  69
  70         * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
  71         * sim-main.h (STATE_CPU): Delete.
  72
  73 2015-04-13  Mike Frysinger  <vapier@gentoo.org>
  74
  75         * configure: Regenerate.
  76
  77 2015-04-06  Mike Frysinger  <vapier@gentoo.org>
  78
  79         * Makefile.in (SIM_OBJS): Delete sim-engine.o.
  80
  81 2015-03-31  Mike Frysinger  <vapier@gentoo.org>
  82
  83         * config.in, configure: Regenerate.
  84
  85 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
  86
  87         * Makefile.in (SIM_RUN_OBJS, SIM_EXTRA_CFLAGS, SIM_EXTRA_LIBS): Delete.
  88         (SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS).
  89         * interp.c: Drop sys/times.h, sys/param.h, run-sim.h, and sim-utils.h
  90         includes.
  91         (target_big_endian): Replace with CURRENT_TARGET_BYTE_ORDER.
  92         (callback, microblaze_state, sim_kind, myname, sim_trace, sim_stop,
  93         sim_load, sim_set_callbacks, sim_complete_command): Delete.
  94         (wbat, wlat, what, rbat, rlat, rhat): Add SIM_CPU* as first arg.
  95         (sim_size): Mark static and add SIM_CPU* as first arg.
  96         (init_pointers): Add SIM_CPU* as first arg and pass to sim_size.
  97         (set_initial_gprs): Add SIM_CPU* as first arg and pass to init_pointers.
  98         (sim_resume): Add local cpu variable.  Pass it to rlat.
  99         (sim_write, sim_read, sim_store_register, sim_fetch_register): Add local
 100         cpu variable.  Pass it to init_pointers.
 101         (sim_stop_reason, sim_do_command): Add local cpu variable.
 102         (sim_info): Add local cpu and callback variables.
 103         (free_state): New cleanup function.
 104         (sim_open): Rewrite to use new common logic.
 105         (sim_close): Delete body.
 106         (sim_create_inferior): Delete call to set_initial_gprs.
 107         * microblaze.h (CPU): Redefine using cpu.
 108         (MEM_RD_BYTE, MEM_RD_HALF, MEM_RD_WORD, MEM_WR_BYTE, MEM_WR_HALF,
 109         MEM_WR_WORD): Pass in cpu as first arg.
 110         * sim-main.h (CIA_GET, CIA_SET, SIM_CPU): Define.
 111         (MAX_NR_PROCESSORS): Delete.
 112         (struct sim_state): Change cpu to *cpu, and rewrite STATE_CPU.
 113
 114 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 115
 116         * interp.c (NUM_ELEM, heap_ptr, stack_ptr, memcycles, struct aout,
 117         LONG, SHORT): Delete.
 118         [WATCHFUNCTIONS]: Delete.
 119         (sim_info) [WATCHFUNCTIONS]: Delete.
 120         (sim_create_inferior): Delete avp, nargs, nenv, s_length, strings,
 121         pointers, and hi_stack.
 122         (sim_do_command): Delete the "watch" command.
 123
 124 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 125
 126         * interp.c (sim_load): Set verbose to 0 when calling sim_load_file.
 127
 128 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 129
 130         * configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT,
 131         SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT, and
 132         SIM_AC_OPTION_INLINE.
 133         * config.in, configure: Regenerate.
 134
 135 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 136
 137         * interp.c: Strip trailing whitespace.
 138
 139 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 140
 141         * configure.ac: Call SIM_AC_OPTION_WARNINGS.
 142         * confingure: Regenerate.
 143         * interp.c: Include run-sim.h.
 144         (microblaze_extract_unsigned_integer): Mark static.
 145         (microblaze_store_unsigned_integer): Likewise.
 146         (int_sbrk, SEXTB, SEXTW, IOMEM): Delete.
 147         (init_pointers, set_initial_gprs): Add (void) to prototype.
 148         (opened, log_open, log_close, is_opened, handle_trap1, process_stub,
 149         util, iu_carry): Delete.
 150
 151 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 152
 153         * config.in, configure: Regenerate.
 154
 155 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 156
 157         * Makefile.in (SIM_EXTRA_CFLAGS): Set to
 158         -DSIM_USE_DEPRECATED_RUN_FRONTEND.
 159         (SIM_RUN_OBJS): Set to run.o.
 160         (SIM_EXTRA_CLEAN): Delete.
 161         (interp.o, microblaze-clean): Delete rules.
 162
 163 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 164
 165         * configure.ac (AC_CHECK_HEADERS): Delete.
 166         * aclocal.m4, configure: Regenerate.
 167
 168 2015-03-08  Mike Frysinger  <vapier@gentoo.org>
 169
 170         * interp.c (microblaze_extract_unsigned_integer): Change %ld to %zu.
 171
 172 2015-02-20  Mike Frysinger  <vapier@gentoo.org>
 173
 174         * interp.c: Delete sysdep.h and netinet/in.h includes.
 175         Include stdlib.h and string.h and unistd.h.
 176         * sysdep.h: Delete.
 177
 178 2015-02-19  Mike Frysinger  <vapier@gentoo.org>
 179
 180         * interp.c (sim_kill): Delete unused func.
 181
 182 2015-02-19  Mike Frysinger  <vapier@gentoo.org>
 183
 184         * microblaze.isa: Add "microblaze_" prefix to "or", "and", and "xor".
 185
 186 2015-02-02  Chen Gang  <gang.chen.5i5j@gmail.com>
 187
 188         * interp.c (sim_do_command): Call freeargv() before return.
 189
 190 2014-07-01  Chen Gang  <gang.chen.5i5j@gmail.com>
 191
 192         * interp.c: Use long int format instead of int format.
 193
 194 2014-08-19  Alan Modra  <amodra@gmail.com>
 195
 196         * configure: Regenerate.
 197
 198 2014-08-15  Roland McGrath  <mcgrathr@google.com>
 199
 200         * configure: Regenerate.
 201         * config.in: Regenerate.
 202
 203 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 204
 205         * interp.c (sim_do_command): Add const to cmd.
 206
 207 2014-03-05  Mike Frysinger  <vapier@gentoo.org>
 208
 209         * interp.c (sim_load): Add const to prog.
 210
 211 2014-02-17  Mike Frysinger  <vapier@gentoo.org>
 212
 213         PR gdb/16450
 214         * interp.c (interrupt): Delete.
 215         (sim_resume): Delete signal(SIGINT) handling.
 216
 217 2013-09-23  Alan Modra  <amodra@gmail.com>
 218
 219         * configure: Regenerate.
 220
 221 2013-06-03  Mike Frysinger  <vapier@gentoo.org>
 222
 223         * aclocal.m4, configure: Regenerate.
 224
 225 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 226
 227         * config.in, configure: Regenerate.
 228
 229 2012-03-24  Mike Frysinger  <vapier@gentoo.org>
 230
 231         * aclocal.m4, config.in, configure: Regenerate.
 232
 233 2011-12-03  Mike Frysinger  <vapier@gentoo.org>
 234
 235         * aclocal.m4: New file.
 236         * configure: Regenerate.
 237
 238 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 239
 240         * configure.ac: Change include to common/acinclude.m4.
 241
 242 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 243
 244         * configure.ac: Change AC_PREREQ to 2.64.  Delete AC_CONFIG_HEADER
 245         call.  Replace common.m4 include with SIM_AC_COMMON.
 246         * configure: Regenerate.
 247
 248 2011-04-16  Mike Frysinger  <vapier@gentoo.org>
 249
 250         * interp.c (sim_complete_command): New stub function.
 251
 252 2010-04-14  Mike Frysinger  <vapier@gentoo.org>
 253
 254         * interp.c (sim_write): Add const to buffer arg.