1 2001-04-15 J.T. Conklin <jtc@redback.com>
3 * Makefile.in (simops.o): Add simops.h to dependency list.
5 Wed Aug 9 02:24:53 2000 Graham Stott <grahams@cygnus.co.uk>
7 * am33.igen: Warning clean-up.
8 (movm): Initialize PC and mask.
9 (mov, movbu, movhu): Set srcreg2 from RI0.
11 (sat16_cmp): Actually do the comparison.
12 (mov_llt): Do not overwrite dstreg with uninitialized variable.
14 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
16 * configure: Regenerated to track ../common/aclocal.m4 changes.
18 2000-05-22 Alexandre Oliva <aoliva@cygnus.com>
20 * am33.igen: Fix leading comments of SP-relative offset insns that
21 referred to other registers. Make their offsets unsigned.
23 2000-05-18 Alexandre Oliva <aoliva@cygnus.com>
25 * mn10300_sim.h (genericAdd, genericSub, genericCmp, genericOr,
26 genericXor, genericBtst): Use `unsigned32'.
27 * op_utils.c: Likewise.
28 * mn10300.igen, am33.igen: Use `unsigned32', `signed32',
29 `unsigned64' or `signed64' where type width is relevant.
31 2000-04-25 Alexandre Oliva <aoliva@cygnus.com>
33 * am33.igen (inc4 Rn): Use genericAdd so as to modify flags.
35 2000-04-09 Alexandre Oliva <aoliva@cygnus.com>
37 * am33.igen: Make SP-relative offsets unsigned. Add `*am33' for
38 some instructions that were missing it.
40 2000-03-03 Alexandre Oliva <oliva@lsd.ic.unicamp.br>
42 * Makefile.in (IGEN_INSN): Added am33.igen.
44 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
46 * configure: Regenerated to track ../common/aclocal.m4 changes.
48 Tue Jul 13 13:26:20 1999 Andrew Cagney <cagney@b1.cygnus.com>
50 * interp.c: Clarify error message reporting an unknown board.
52 1999-05-08 Felix Lee <flee@cygnus.com>
54 * configure: Regenerated to track ../common/aclocal.m4 changes.
56 1999-04-16 Frank Ch. Eigler <fche@cygnus.com>
58 * interp.c (program_interrupt): Detect undesired recursion using
59 static flag. Set NMIRC register's SYSEF flag during
60 --board=stdeval1 mode.
61 * dv-mn103-int.c (write_icr): Add backdoor address to allow CPU to
64 1999-04-02 Keith Seitz <keiths@cygnus.com>
66 * Makefile.in (SIM_EXTRA_CFLAGS): Define a POLL_QUIT_INTERVAL
67 for use in the simulator so that the poll_quit callback is
70 Tue Mar 9 21:26:41 1999 Andrew Cagney <cagney@b1.cygnus.com>
72 * dv-mn103int.c (mn103int_ioctl): Return something.
73 * dv-mn103tim.c (write_tm6md): GCC suggested parentheses around &&
76 Tue Feb 16 23:57:17 1999 Jeffrey A Law (law@cygnus.com)
78 * mn10300.igen (retf): Fix return address computation and store
79 the new pc value into nia.
81 1998-12-29 Frank Ch. Eigler <fche@cygnus.com>
83 * Makefile.in (WITH_COMMON_OBJS): Build also dv-sockser.o.
84 * interp.c (sim_open): Add stub mn103002 cache control memory regions.
85 Set OPERATING_ENVIRONMENT on "stdeval1" board.
86 (mn10300_core_signal): New function to intercept memory errors.
87 (program_interrupt): New function to dispatch to exception vector
88 (mn10300_exception_*): New functions to snapshot pre/post exception
90 * sim-main.h (SIM_CORE_SIGNAL): Define hook - call mn10300_core_signal.
91 (SIM_ENGINE_HALT_HOOK): Do nothing.
92 (SIM_CPU_EXCEPTION*): Define hooks to call mn10300_cpu_exception*().
93 (_sim_cpu): Add exc_* fields to store register value snapshots.
94 * dv-mn103ser.c (*): Support dv-sockser backend for UART I/O.
95 Various endianness and warning fixes.
96 * mn10300.igen (illegal): Call program_interrupt on error.
97 (break): Call program_interrupt on breakpoint
99 Several changes from <janczyn@cygnus.com> and <cagney@cygnus.com>
101 * dv-mn103int.c (mn103int_ioctl): New function for NMI
102 generation. (mn103int_finish): Install it as ioctl handler.
103 * dv-mn103tim.c: Support timer 6 specially. Endianness fixes.
105 Wed Oct 14 12:11:05 1998 Jeffrey A Law (law@cygnus.com)
107 * am33.igen: Allow autoincrement stores using the same register
108 for source and destination operands.
110 Mon Aug 31 10:19:55 1998 Jeffrey A Law (law@cygnus.com)
112 * am33.igen: Reverse HI/LO outputs of 4 operand "mul" and "mulu".
114 Fri Aug 28 14:40:49 1998 Joyce Janczyn <janczyn@cygnus.com>
116 * interp.c (sim_open): Check for invalid --board option, fix
117 indentation, allocate memory for mem control and DMA regs.
119 Wed Aug 26 09:29:38 1998 Joyce Janczyn <janczyn@cygnus.com>
121 * mn10300.igen (div,divu): Fix divide instructions so divide by 0
122 behaves like the hardware.
124 Mon Aug 24 11:50:09 1998 Joyce Janczyn <janczyn@cygnus.com>
126 * sim-main.h (SIM_HANDLES_LMA): Define SIM_HANDLES_LMA.
128 Wed Aug 12 12:36:07 1998 Jeffrey A Law (law@cygnus.com)
130 * am33.igen: Handle case where first DSP operation modifies a
131 register used in the second DSP operation correctly.
133 Tue Jul 28 10:10:25 1998 Jeffrey A Law (law@cygnus.com)
135 * am33.igen: Detect cases where two operands must not match for
136 DSP instructions too.
138 Mon Jul 27 12:04:17 1998 Jeffrey A Law (law@cygnus.com)
140 * am33.igen: Detect cases where two operands must not match in
141 non-DSP instructions.
143 Fri Jul 24 18:15:21 1998 Joyce Janczyn <janczyn@cygnus.com>
145 * op_utils.c (do_syscall): Rewrite to use common/syscall.c.
146 (syscall_read_mem, syscall_write_mem): New functions for syscall
148 * mn10300_sim.h: Add prototypes for syscall_read_mem and
150 * mn10300.igen: Change C++ style comments to C style comments.
151 Check for divide by zero in div and divu ops.
153 Fri Jul 24 12:49:28 1998 Jeffrey A Law (law@cygnus.com)
155 * am33.igen (translate_xreg): New function. Use it as needed.
157 Thu Jul 23 10:05:28 1998 Jeffrey A Law (law@cygnus.com)
159 * am33.igen: Add some missing instructions.
161 * am33.igen: Autoincrement loads/store fixes.
163 Tue Jul 21 09:48:14 1998 Jeffrey A Law (law@cygnus.com)
165 * am33.igen: Add mov_lCC DSP instructions.
167 * am33.igen: Add most am33 DSP instructions.
169 Thu Jul 9 10:06:55 1998 Jeffrey A Law (law@cygnus.com)
171 * mn10300.igen: Fix Z bit for addc and subc instructions.
172 Minor fixes in multiply/divide patterns.
174 * am33.igen: Add missing mul[u] imm32,Rn. Fix condition code
175 handling for many instructions. Fix sign extension for some
178 * am33.igen: Fix Z bit for remaining addc/subc instructions.
179 Do not sign extend immediate for mov imm,XRn.
180 More random mul, mac & div fixes.
181 Remove some unused variables.
182 Sign extend 24bit displacement in memory addresses.
184 * am33.igen: Fix Z bit for addc Rm,Rn and subc Rm,Rn. Various
185 fixes to 2 register multiply, divide and mac instructions. Set
186 Z,N correctly for sat16. Sign extend 24 bit immediate for add,
187 and sub instructions.
189 * am33.igen: Add remaining non-DSP instructions.
191 Wed Jul 8 16:29:12 1998 Jeffrey A Law (law@cygnus.com)
193 * am33.igen (translate_rreg): New function. Use it as appropriate.
195 * am33.igen: More am33 instructions. Fix "div".
197 Mon Jul 6 15:39:22 1998 Jeffrey A Law (law@cygnus.com)
199 * mn10300.igen: Add am33 support.
201 * Makefile.in: Use multi-sim to support both a mn10300 and am33
204 * am33.igen: Add many more am33 instructions.
206 Wed Jul 1 17:07:09 1998 Jeffrey A Law (law@cygnus.com)
208 * mn10300_sim.h (FETCH24): Define.
210 * mn10300_sim.h: Add defines for some registers found on the AM33.
211 * am33.igen: New file with some am33 support.
213 Tue Jun 30 11:23:20 1998 Jeffrey A Law (law@cygnus.com)
215 * mn10300_sim.h: Include bfd.h
216 (struct state): Add more room for processor specific registers.
219 Thu Jun 25 10:12:03 1998 Joyce Janczyn <janczyn@cygnus.com>
221 * dv-mn103tim.c: Include sim-assert.h
222 * dv-mn103ser.c (do_polling_event): Check for incoming data on
223 serial line and schedule next polling event.
224 (read_status_reg): schedule events to check for incoming data on
225 serial line and issue interrupt if necessary.
227 Fri Jun 19 16:47:27 1998 Joyce Janczyn <janczyn@cygnus.com>
229 * interp.c (sim_open): hook up serial 1 and 2 ports properly (typo).
231 Fri Jun 19 11:59:26 1998 Joyce Janczyn <janczyn@cygnus.com>
233 * interp.c (board): Rename am32 to stdeval1 as this is the name
234 consistently used to refer to the mn1030002 board.
236 Thu June 18 14:37:14 1998 Joyce Janczyn <janczyn@cygnus.com>
237 * interp.c (sim_open): Fix typo in address of EXTMD register
238 (0x34000280, not 0x3400280).
240 Wed Jun 17 18:00:18 1998 Jeffrey A Law (law@cygnus.com)
242 * simops.c (syscall): Handle change in opcode # for syscall.
243 * mn10300.igen (syscall): Likewise.
245 Tue June 16 09:36:21 1998 Joyce Janczyn <janczyn@cygnus.com>
246 * dv-mn103int.c (mn103int_finish): Regular interrupts (not NMI or
247 reset) are not enabled on reset.
249 Sun June 14 17:04:00 1998 Joyce Janczyn <janczyn@cygnus.com>
250 * dv-mn103iop.c (write_*_reg): Check for attempt to write r/o
252 * dv-mn103ser.c: Fill in methods for reading and writing to serial
254 * interp.c (sim_open): Make the serial device a polling device.
256 Fri June 12 16:24:00 1998 Joyce Janczyn <janczyn@cygnus.com>
257 * dv-mn103iop.c: New file for handling am32 io ports.
258 * configure.in: Add mn103iop to hw_device list.
259 * configure: Re-generate.
260 * interp.c (sim_open): Create io port device.
262 Wed June 10 14:34:00 1998 Joyce Janczyn <janczyn@cygnus.com>
263 * dv-mn103int.c (external_group): Use enumerated types to access
264 correct group addresses.
265 * dv-mn103tim.c (do_counter_event): Underflow of cascaded timer
266 triggers an interrupt on the higher-numbered timer's port.
268 Mon June 8 13:30:00 1998 Joyce Janczyn <janczyn@cygnus.com>
269 * interp.c: (mn10300_option_handler): New function parses arguments
271 * (board): Add --board option for specifying am32.
272 * (sim_open): Create new timer and serial devices and control
273 configuration of other am32 devices via board option.
274 * dv-mn103tim.c, dv-mn103ser.c: New files for timers and serial devices.
275 * dv-mn103cpu.c: Fix typos in opening comments.
276 * dv-mn103int.c: Adjust interrupt controller settings for am32 instead of am30.
277 * configure.in: Add mn103tim and mn103ser to hw_device list.
278 * configure: Re-generate.
280 Mon May 25 20:50:35 1998 Andrew Cagney <cagney@b1.cygnus.com>
282 * dv-mn103int.c, dv-mn103cpu.c: Rename *_callback to *_method.
284 * dv-mn103cpu.c, dv-mn103int.c: Include hw-main.h and
285 sim-main.h. Declare a struct hw_descriptor instead of struct
286 hw_device_descriptor.
288 Mon May 25 17:33:33 1998 Andrew Cagney <cagney@b1.cygnus.com>
290 * dv-mn103cpu.c (struct mn103cpu): Change type of pending_handler
293 Fri May 22 12:17:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
295 * configure.in (SIM_AC_OPTION_HARDWARE): Add argument "yes".
297 Wed May 6 13:29:06 1998 Andrew Cagney <cagney@b1.cygnus.com>
299 * interp.c (sim_open): Create a polling PAL device.
301 Fri May 1 16:39:15 1998 Andrew Cagney <cagney@b1.cygnus.com>
303 * dv-mn103int.c (mn103int_port_event):
304 (mn103int_port_event):
305 (mn103int_io_read_buffer):
306 (mn103int_io_write_buffer):
308 * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Drop CPU/CIA args.
309 (mn103cpu_port_event): Ditto.
310 (mn103cpu_io_read_buffer): Ditto.
311 (mn103cpu_io_write_buffer): Ditto.
313 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
315 * configure: Regenerated to track ../common/aclocal.m4 changes.
317 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
319 * configure: Regenerated to track ../common/aclocal.m4 changes.
322 Sun Apr 26 15:19:55 1998 Tom Tromey <tromey@cygnus.com>
324 * acconfig.h: New file.
325 * configure.in: Reverted change of Apr 24; use sinclude again.
327 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
329 * configure: Regenerated to track ../common/aclocal.m4 changes.
332 Fri Apr 24 11:19:07 1998 Tom Tromey <tromey@cygnus.com>
334 * configure.in: Don't call sinclude.
336 Tue Apr 14 10:03:02 1998 Andrew Cagney <cagney@b1.cygnus.com>
338 * mn10300_sim.h: Declare all functions in op_utils.c using
341 * sim-main.c: New file. Include op_utils.c.
343 * mn10300.igen (mov, cmp): Use new igen operators `!' and `=' to
344 differentiate between MOV/CMP immediate/register instructions.
346 * configure.in (SIM_AC_OPTION_INLINE): Add and enable.
347 * configure: Regenerate.
349 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
351 * configure: Regenerated to track ../common/aclocal.m4 changes.
353 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
355 * interp.c (hw): Delete variable, moved to SIM_DESC.
356 (sim_open): Delete calls to hw_tree_create, hw_tree_finish.
357 Handled by sim-module.
358 (sim_open): Do not anotate tree with trace properties, handled by
360 (sim_open): Call sim_hw_parse instead of hw_tree_parse.
362 * configure: Regenerated to track ../common/aclocal.m4 changes.
364 Thu Mar 26 20:46:18 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
366 * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Save the entire PC
367 on the stack when delivering interrupts (not just the lower
369 * mn10300.igen (mov (Di,Am),Dn): Fix decode. Registers were
370 specified in the wrong order.
372 Fri Mar 27 00:56:40 1998 Andrew Cagney <cagney@b1.cygnus.com>
374 * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Stop loss of
375 succeeding interrupts, clear pending_handler when the handler
378 Thu Mar 26 10:11:01 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
380 * Makefile.in (tmp-igen): Prefix all usage of move-if-change
381 script with $(SHELL) to make NT native builds happy.
382 * configure: Regenerate because of change to ../common/aclocal.m4.
384 Thu Mar 26 11:22:31 1998 Andrew Cagney <cagney@b1.cygnus.com>
386 * configure.in: Make --enable-sim-common the default.
387 * configure: Re-generate.
389 * sim-main.h (CIA_GET, CIA_SET): Save/restore current instruction
390 address into Sate.regs[REG_PC] instead of common struct.
392 Wed Mar 25 17:42:00 1998 Joyce Janczyn <janczyn@cygnus.com>
394 * mn10300.igen (cmp imm8,An): Do not sign extend imm8 value.
396 Wed Mar 25 12:08:00 1998 Joyce Janczyn <janczyn@cygnus.com>
398 * simops.c (OP_F0FD): Initialise variable 'sp'.
400 Thu Mar 26 00:21:32 1998 Andrew Cagney <cagney@b1.cygnus.com>
402 * dv-mn103int.c (decode_group): A group register every 4 bytes not
404 (write_icr): Rewrite equation updating request field.
405 (read_iagr): Fix check that interrupt is still pending.
407 Wed Mar 25 16:14:50 1998 Andrew Cagney <cagney@b1.cygnus.com>
409 * interp.c (sim_open): Tidy up device creation.
411 * dv-mn103int.c (mn103int_port_event): Drive NMI with non-zero
413 (mn103int_io_read_buffer): Convert absolute address to register
415 (read_icr, write_icr): Convert block offset into group offset.
417 Wed Mar 25 15:08:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
419 * interp.c (sim_open): Create second 1mb memory region at
421 (sim_open): Create a device tree.
423 (do_interrupt): Delete, needs to use dv-mn103cpu.c
425 * dv-mn103int.c, dv-mn103cpu.c: New files.
427 Wed Mar 25 08:47:38 1998 Andrew Cagney <cagney@b1.cygnus.com>
429 * mn10300_sim.h (EXTRACT_PSW_LM, INSERT_PSW_LM, PSW_IE, PSW_LM):
433 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
435 * configure: Regenerated to track ../common/aclocal.m4 changes.
437 Wed Mar 25 10:24:48 1998 Andrew Cagney <cagney@b1.cygnus.com>
439 * interp.c (sim-options.h): Include.
440 (sim_kind, myname): Declare when not using common framework.
442 * mn10300_sim.h (do_syscall, generic*): Provide prototypes for
443 functions found in op_utils.c
445 * mn10300.igen (add): Discard unused variables.
447 * configure, config.in: Re-generate with autoconf 2.12.1.
449 Tue Mar 24 15:27:00 1998 Joyce Janczyn <janczyn@cygnus.com>
451 Add support for --enable-sim-common option.
452 * Makefile.in (WITHOUT_COMMON_OBJS): Files included if
453 ! --enable-sim-common
454 (WITH_COMMON_OBJS): Files included if --enable-sim-common.
455 (MN10300_OBJS,MN10300_INTERP_DEP): New variables.
457 ({WITHOUT,WITH}_COMMON_RUN_OBJS,SIM_RUN_OBJS): New variables.
458 (SIM_EXTRA_CFLAGS): New variable.
459 (clean-extra): Clean up igen files.
460 (../igen/igen,clean-igen,tmp-igen): New rules.
461 * configure.in: Add support for common framework via
463 * configure: Regenerate.
464 * interp.c: #include sim-main if WITH_COMMON, not mn10300_sim.h.
465 (hash,dispatch,sim_size): Don't compile if ! WITH_COMMON.
466 (init_system,sim_write,compare_simops): Likewise.
467 (sim_set_profile,sim_set_profile_size): Likewise.
468 (sim_stop,sim_resume,sim_trace,sim_info): Likewise.
469 (sim_set_callbacks,sim_stop_reason,sim_read,sim_load): Likewise.
470 (enum interrupt_type): New enum.
471 (interrupt_names): New global.
472 (do_interrupt): New function.
473 (sim_open): Define differently if WITH_COMMON.
474 (sim_close,sim_create_inferior,sim_do_command): Likewise.
475 * mn10300_sim.h ({load,store}_{byte,half,word}): Define versions
477 * mn10300.igen: New file.
478 * mn10300.dc: New file.
479 * op_utils.c: New file.
480 * sim-main.h: New file.
482 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
484 * configure: Regenerated to track ../common/aclocal.m4 changes.
486 Fri Feb 27 18:36:04 1998 Jeffrey A Law (law@cygnus.com)
488 * simops.c (inc): Fix typo.
490 Wed Feb 25 01:59:29 1998 Jeffrey A Law (law@cygnus.com)
492 * simops.c (signed multiply instructions): Cast input operands to
493 signed32 before casting them to signed64 so that the sign bit
494 is propagated properly.
496 Mon Feb 23 20:23:19 1998 Mark Alexander <marka@cygnus.com>
498 * Makefile.in: Last change was bad. Define NL_TARGET
499 so that targ-vals.h will be used instead of syscall.h.
500 * simops.c: Use targ-vals.h instead of syscall.h.
501 (OP_F020): Disable unsupported system calls.
503 Mon Feb 23 09:44:38 1998 Mark Alexander <marka@cygnus.com>
505 * Makefile.in: Get header files from libgloss/mn10300/sys.
507 Sun Feb 22 16:02:24 1998 Jeffrey A Law (law@cygnus.com)
509 * simops.c: Include sim-types.h.
511 Wed Feb 18 13:07:08 1998 Jeffrey A Law (law@cygnus.com)
513 * simops.c (multiply instructions): Cast input operands to a
514 signed64/unsigned64 type as appropriate.
516 Tue Feb 17 12:47:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
518 * interp.c (sim_store_register, sim_fetch_register): Pass in
519 length parameter. Return -1.
521 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
523 * configure: Regenerated to track ../common/aclocal.m4 changes.
525 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
527 * configure: Regenerated to track ../common/aclocal.m4 changes.
529 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
531 * configure: Regenerated to track ../common/aclocal.m4 changes.
533 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
535 * configure: Regenerated to track ../common/aclocal.m4 changes.
538 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
540 * configure: Regenerated to track ../common/aclocal.m4 changes.
542 Tue Nov 11 10:38:52 1997 Jeffrey A Law (law@cygnus.com)
544 * simops.c (call:16 call:32): Stack adjustment is determined solely
547 Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
549 * interp.c (sim_load): Pass lma_p and sim_write args to
552 Tue Oct 21 10:12:03 1997 Jeffrey A Law (law@cygnus.com)
554 * simops.c: Correctly handle register restores for "ret" and "retf"
557 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
559 * configure: Regenerated to track ../common/aclocal.m4 changes.
561 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
563 * configure: Regenerated to track ../common/aclocal.m4 changes.
565 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
567 * configure: Regenerated to track ../common/aclocal.m4 changes.
569 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
571 * configure: Regenerated to track ../common/aclocal.m4 changes.
573 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
575 * configure: Regenerated to track ../common/aclocal.m4 changes.
577 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
579 * configure: Regenerated to track ../common/aclocal.m4 changes.
581 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
583 * configure: Regenerated to track ../common/aclocal.m4 changes.
585 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
587 * configure: Regenerated to track ../common/aclocal.m4 changes.
590 Tue Aug 26 10:41:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
592 * interp.c (sim_kill): Delete.
593 (sim_create_inferior): Add ABFD argument.
594 (sim_load): Move setting of PC from here.
595 (sim_create_inferior): To here.
597 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
599 * configure: Regenerated to track ../common/aclocal.m4 changes.
602 Mon Aug 25 16:14:44 1997 Andrew Cagney <cagney@b1.cygnus.com>
604 * interp.c (sim_open): Add ABFD argument.
606 Tue Jun 24 13:46:20 1997 Jeffrey A Law (law@cygnus.com)
608 * interp.c (sim_resume): Clear State.exited.
609 (sim_stop_reason): If State.exited is nonzero, then indicate that
610 the simulator exited instead of stopped.
611 * mn10300_sim.h (struct _state): Add exited field.
612 * simops.c (syscall): Set State.exited for SYS_exit.
614 Wed Jun 11 22:07:56 1997 Jeffrey A Law (law@cygnus.com)
616 * simops.c: Fix thinko in last change.
618 Tue Jun 10 12:31:32 1997 Jeffrey A Law (law@cygnus.com)
620 * simops.c: "call" stores the callee saved registers into the
621 stack! Update the stack pointer properly when done with
624 * simops.c: Fix return address computation for "call" instructions.
626 Thu May 22 01:43:11 1997 Jeffrey A Law (law@cygnus.com)
628 * interp.c (sim_open): Fix typo.
630 Wed May 21 23:27:58 1997 Jeffrey A Law (law@cygnus.com)
632 * interp.c (sim_resume): Add missing case in big switch
633 statement (for extb instruction).
635 Tue May 20 17:51:30 1997 Jeffrey A Law (law@cygnus.com)
637 * interp.c: Replace all references to load_mem and store_mem
638 with references to load_byte, load_half, load_3_byte, load_word
639 and store_byte, store_half, store_3_byte, store_word.
640 (INLINE): Delete definition.
641 (load_mem_big): Likewise.
642 (max_mem): Make it global.
643 (dispatch): Make this function inline.
644 (load_mem, store_mem): Delete functions.
645 * mn10300_sim.h (INLINE): Define.
646 (RLW): Delete unused definition.
647 (load_mem, store_mem): Delete declarations.
648 (load_mem_big): New definition.
649 (load_byte, load_half, load_3_byte, load_word): New functions.
650 (store_byte, store_half, store_3_byte, store_word): New functions.
651 * simops.c: Replace all references to load_mem and store_mem
652 with references to load_byte, load_half, load_3_byte, load_word
653 and store_byte, store_half, store_3_byte, store_word.
655 Tue May 20 10:21:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
657 * interp.c (sim_open): Add callback to arguments.
658 (sim_set_callbacks): Delete SIM_DESC argument.
660 Mon May 19 13:54:22 1997 Jeffrey A Law (law@cygnus.com)
662 * interp.c (dispatch): Make this an inline function.
664 * simops.c (syscall): Use callback->write regardless of
665 what file descriptor we're writing too.
667 Sun May 18 16:46:31 1997 Jeffrey A Law (law@cygnus.com)
669 * interp.c (load_mem_big): Remove function. It's now a macro
671 (compare_simops): New function.
672 (sim_open): Sort the Simops table before inserting entries
674 * mn10300_sim.h: Remove unused #defines.
675 (load_mem_big): Define.
677 Fri May 16 16:36:17 1997 Jeffrey A Law (law@cygnus.com)
679 * interp.c (load_mem): If we get a load from an out of range
681 (store_mem): Likewise for stores.
682 (max_mem): New variable.
684 Tue May 6 13:24:36 1997 Jeffrey A Law (law@cygnus.com)
686 * mn10300_sim.h: Fix ordering of bits in the PSW.
688 * interp.c: Improve hashing routine to avoid long list
689 traversals for common instructions. Add HASH_STAT support.
690 Rewrite opcode dispatch code using a big switch instead of
691 cascaded if/else statements. Avoid useless calls to load_mem.
693 Mon May 5 18:07:48 1997 Jeffrey A Law (law@cygnus.com)
695 * mn10300_sim.h (struct _state): Add space for mdrq register.
697 * simops.c: Don't abort for trap. Add support for the extended
698 instructions, "getx", "putx", "mulq", "mulqu", "sat16", "sat24",
701 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
703 * configure: Regenerated to track ../common/aclocal.m4 changes.
705 Fri Apr 18 14:04:04 1997 Andrew Cagney <cagney@b1.cygnus.com>
707 * interp.c (sim_stop): Add stub function.
709 Thu Apr 17 03:26:59 1997 Doug Evans <dje@canuck.cygnus.com>
711 * Makefile.in (SIM_OBJS): Add sim-load.o.
712 * interp.c (sim_kind, myname): New static locals.
713 (sim_open): Set sim_kind, myname. Ignore -E arg.
714 (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
715 load file into simulator. Set start address from bfd.
716 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
718 Wed Apr 16 19:30:44 1997 Andrew Cagney <cagney@b1.cygnus.com>
720 * simops.c (OP_F020): SYS_execv, SYS_time, SYS_times, SYS_utime
721 only include if implemented by host.
722 (OP_F020): Typecast arg passed to time function;
724 Mon Apr 7 23:57:49 1997 Jeffrey A Law (law@cygnus.com)
726 * simops.c (syscall): Handle new mn10300 calling conventions.
728 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
730 * configure: Regenerated to track ../common/aclocal.m4 changes.
733 Fri Apr 4 20:02:37 1997 Ian Lance Taylor <ian@cygnus.com>
735 * Makefile.in: Change mn10300-opc.o to m10300-opc.o, to match
736 corresponding change in opcodes directory.
738 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
740 * interp.c (sim_open): New arg `kind'.
742 * configure: Regenerated to track ../common/aclocal.m4 changes.
744 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
746 * configure: Regenerated to track ../common/aclocal.m4 changes.
748 Thu Mar 20 11:58:02 1997 Jeffrey A Law (law@cygnus.com)
750 * simops.c: Fix register extraction for a two "movbu" variants.
751 Somewhat simplify "sub" instructions.
752 Correctly sign extend operands for "mul". Put the correct
753 half of the result in MDR for "mul" and "mulu".
754 Implement remaining instructions.
755 Tweak opcode for "syscall".
757 Tue Mar 18 14:21:21 1997 Jeffrey A Law (law@cygnus.com)
759 * simops.c: Do syscall emulation in "syscall" instruction. Add
760 dummy "trap" instruction.
762 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
764 * configure: Regenerated to track ../common/aclocal.m4 changes.
766 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
768 * configure: Re-generate.
770 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
772 * configure: Regenerate to track ../common/aclocal.m4 changes.
774 Thu Mar 13 12:54:45 1997 Doug Evans <dje@canuck.cygnus.com>
776 * interp.c (sim_open): New SIM_DESC result. Argument is now
778 (other sim_*): New SIM_DESC argument.
780 Wed Mar 12 15:04:00 1997 Jeffrey A Law (law@cygnus.com)
782 * simops.c: Fix carry bit computation for "add" instructions.
784 * simops.c: Fix typos in bset insns. Fix arguments to store_mem
785 for bset imm8,(d8,an) and bclr imm8,(d8,an).
787 Wed Mar 5 15:00:10 1997 Jeffrey A Law (law@cygnus.com)
789 * simops.c: Fix register references when computing Z and N bits
792 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
794 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
795 COMMON_{PRE,POST}_CONFIG_FRAG instead.
796 * configure.in: sinclude ../common/aclocal.m4.
797 * configure: Regenerated.
799 Fri Jan 24 10:47:25 1997 Jeffrey A Law (law@cygnus.com)
801 * interp.c (init_system): Allocate 2^19 bytes of space for the
804 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
806 * configure configure.in Makefile.in: Update to new configure
807 scheme which is more compatible with WinGDB builds.
808 * configure.in: Improve comment on how to run autoconf.
809 * configure: Re-run autoconf to get new ../common/aclocal.m4.
810 * Makefile.in: Use autoconf substitution to install common
813 Tue Jan 21 15:03:04 1997 Jeffrey A Law (law@cygnus.com)
815 * simops.c: Undo last change to "rol" and "ror", original code
818 Thu Jan 16 11:28:14 1997 Jeffrey A Law (law@cygnus.com)
820 * simops.c: Fix "rol" and "ror".
822 Wed Jan 15 06:45:58 1997 Jeffrey A Law (law@cygnus.com)
824 * simops.c: Fix typo in last change.
826 Mon Jan 13 13:22:35 1997 Jeffrey A Law (law@cygnus.com)
828 * simops.c: Use REG macros in few places not using them yet.
830 Mon Jan 6 16:21:19 1997 Jeffrey A Law (law@cygnus.com)
832 * mn10300_sim.h (struct _state): Fix number of registers!
834 Tue Dec 31 16:20:41 1996 Jeffrey A Law (law@cygnus.com)
836 * mn10300_sim.h (struct _state): Put all registers into a single
837 array to make gdb implementation easier.
838 (REG_*): Add definitions for all registers in the state array.
839 (SEXT32, SEXT40, SEXT44, SEXT60): Remove unused macros.
840 * simops.c: Related changes.
842 Wed Dec 18 10:10:45 1996 Jeffrey A Law (law@cygnus.com)
844 * interp.c (sim_resume): Handle 0xff as a single byte insn.
846 * simops.c: Fix overflow computation for "add" and "inc"
849 Mon Dec 16 10:03:52 1996 Jeffrey A Law (law@cygnus.com)
851 * simops.c: Handle "break" instruction.
853 * simops.c: Fix restoring the PC for "ret" and "retf" instructions.
855 Wed Dec 11 09:53:10 1996 Jeffrey A Law (law@cygnus.com)
857 * gencode.c (write_opcodes): Also write out the format of the
859 * mn10300_sim.h (simops): Add "format" field.
860 * interp.c (sim_resume): Deal with endianness issues here.
862 Tue Dec 10 15:05:37 1996 Jeffrey A Law (law@cygnus.com)
864 * simops.c (REG0_4): Define.
865 Use REG0_4 for indexed loads/stores.
867 Sat Dec 7 09:50:28 1996 Jeffrey A Law (law@cygnus.com)
869 * simops.c (REG0_16): Fix typo.
871 Fri Dec 6 14:13:34 1996 Jeffrey A Law (law@cygnus.com)
873 * simops.c: Call abort for any instruction that's not currently
876 * simops.c: Define accessor macros to extract register
877 values from instructions. Use them consistently.
879 * interp.c: Delete unused global variable "OP".
880 (sim_resume): Remove unused variable "opcode".
881 * simops.c: Fix some uninitialized variable problems, add
882 parens to fix various -Wall warnings.
884 * gencode.c (write_header): Add "insn" and "extension" arguments
885 to the OP_* declarations.
886 (write_template): Similarly for function templates.
887 * interp.c (insn, extension): Remove global variables. Instead
888 pass them as arguments to the OP_* functions.
889 * mn10300_sim.h: Remove decls for "insn" and "extension".
890 * simops.c (OP_*): Accept "insn" and "extension" as arguments
891 instead of using globals.
893 Thu Dec 5 22:26:31 1996 Jeffrey A Law (law@cygnus.com)
895 * simops.c: Fix typos in "mov am,(d16,an)" and "mov am,(d32,an)"
897 * simops.c: Fix thinkos in last change to "inc dn".
899 Wed Dec 4 10:57:53 1996 Jeffrey A Law (law@cygnus.com)
901 * simops.c: "add imm,sp" does not effect the condition codes.
902 "inc dn" does effect the condition codes.
904 Tue Dec 3 17:37:45 1996 Jeffrey A Law (law@cygnus.com)
906 * simops.c: Treat both operands as signed values for
909 * simops.c: Fix simulation of division instructions.
910 Fix typos/thinkos in several "cmp" and "sub" instructions.
912 Mon Dec 2 12:31:40 1996 Jeffrey A Law (law@cygnus.com)
914 * simops.c: Fix carry bit handling in "sub" and "cmp"
917 * simops.c: Fix "mov imm8,an" and "mov imm16,dn".
919 Sun Dec 1 16:05:42 1996 Jeffrey A Law (law@cygnus.com)
921 * simops.c: Fix overflow computation for many instructions.
923 * simops.c: Fix "mov dm, an", "movbu dm, (an)", and "movhu dm, (an)".
925 * simops.c: Fix "mov am, dn".
927 * simops.c: Fix more bugs in "add imm,an" and
930 Wed Nov 27 09:20:42 1996 Jeffrey A Law (law@cygnus.com)
932 * simops.c: Fix bugs in "movm" and "add imm,an".
934 * simops.c: Don't lose the upper 24 bits of the return
935 pointer in "call" and "calls" instructions. Rough cut
936 at emulated system calls.
938 * simops.c: Implement the remaining 5, 6 and 7 byte instructions.
940 * simops.c: Implement remaining 4 byte instructions.
942 * simops.c: Implement remaining 3 byte instructions.
944 * simops.c: Implement remaining 2 byte instructions. Call
945 abort for instructions we're not implementing now.
947 Tue Nov 26 15:43:41 1996 Jeffrey A Law (law@cygnus.com)
949 * simops.c: Implement lots of random instructions.
951 * simops.c: Implement "movm" and "bCC" insns.
953 * mn10300_sim.h (_state): Add another register (MDR).
955 * simops.c: Implement "cmp", "calls", "rets", "jmp" and
956 a few additional random insns.
958 * mn10300_sim.h (PSW_*): Define for CC status tracking.
959 (REG_D0, REG_A0, REG_SP): Define.
960 * simops.c: Implement "add", "addc" and a few other random
963 * gencode.c, interp.c: Snapshot current simulator code.
965 Mon Nov 25 12:46:38 1996 Jeffrey A Law (law@cygnus.com)
967 * Makefile.in, config.in, configure, configure.in: New files.
968 * gencode.c, interp.c, mn10300_sim.h, simops.c: New files.