3 # Copyright 2010 - Steven Rostedt <srostedt@redhat.com>, Red Hat Inc.
4 # Licensed under the terms of the GNU GPL License version 2
9 use Fcntl
qw(F_GETFL F_SETFL O_NONBLOCK);
10 use File
::Path
qw(mkpath);
11 use File
::Copy
qw(cp);
24 $default{"NUM_TESTS"} = 1;
25 $default{"REBOOT_TYPE"} = "grub";
26 $default{"TEST_TYPE"} = "test";
27 $default{"BUILD_TYPE"} = "randconfig";
28 $default{"MAKE_CMD"} = "make";
29 $default{"TIMEOUT"} = 120;
30 $default{"TMP_DIR"} = "/tmp/ktest/\${MACHINE}";
31 $default{"SLEEP_TIME"} = 60; # sleep time between tests
32 $default{"BUILD_NOCLEAN"} = 0;
33 $default{"REBOOT_ON_ERROR"} = 0;
34 $default{"POWEROFF_ON_ERROR"} = 0;
35 $default{"REBOOT_ON_SUCCESS"} = 1;
36 $default{"POWEROFF_ON_SUCCESS"} = 0;
37 $default{"BUILD_OPTIONS"} = "";
38 $default{"BISECT_SLEEP_TIME"} = 60; # sleep time between bisects
39 $default{"PATCHCHECK_SLEEP_TIME"} = 60; # sleep time between patch checks
40 $default{"CLEAR_LOG"} = 0;
41 $default{"BISECT_MANUAL"} = 0;
42 $default{"BISECT_SKIP"} = 1;
43 $default{"SUCCESS_LINE"} = "login:";
44 $default{"DETECT_TRIPLE_FAULT"} = 1;
45 $default{"NO_INSTALL"} = 0;
46 $default{"BOOTED_TIMEOUT"} = 1;
47 $default{"DIE_ON_FAILURE"} = 1;
48 $default{"SSH_EXEC"} = "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND";
49 $default{"SCP_TO_TARGET"} = "scp \$SRC_FILE \$SSH_USER\@\$MACHINE:\$DST_FILE";
50 $default{"REBOOT"} = "ssh \$SSH_USER\@\$MACHINE reboot";
51 $default{"STOP_AFTER_SUCCESS"} = 10;
52 $default{"STOP_AFTER_FAILURE"} = 60;
53 $default{"STOP_TEST_AFTER"} = 600;
54 $default{"LOCALVERSION"} = "-test";
76 my $poweroff_on_error;
78 my $powercycle_after_reboot;
79 my $poweroff_after_halt;
92 my $start_minconfig_defined;
101 my $config_bisect_good;
102 my $in_patchcheck = 0;
111 my $bisect_sleep_time;
112 my $patchcheck_sleep_time;
118 my $detect_triplefault;
120 my $reboot_success_line;
122 my $stop_after_success;
123 my $stop_after_failure;
136 # do not force reboots on config problems
139 $config_help{"MACHINE"} = << "EOF"
140 The machine hostname that you will test
.
143 $config_help{"SSH_USER"} = << "EOF"
144 The box is expected to have ssh on normal bootup
, provide the user
145 (most likely root
, since you need privileged operations
)
148 $config_help{"BUILD_DIR"} = << "EOF"
149 The directory that contains the Linux source code
(full path
).
152 $config_help{"OUTPUT_DIR"} = << "EOF"
153 The directory that the objects will be built
(full path
).
154 (can
not be same as BUILD_DIR
)
157 $config_help{"BUILD_TARGET"} = << "EOF"
158 The location of the compiled file to copy to the target
.
159 (relative to OUTPUT_DIR
)
162 $config_help{"TARGET_IMAGE"} = << "EOF"
163 The place to put your image on the test machine
.
166 $config_help{"POWER_CYCLE"} = << "EOF"
167 A script
or command to reboot the box
.
169 Here is a digital loggers power switch example
170 POWER_CYCLE
= wget
--no-proxy
-O
/dev/null
-q
--auth
-no-challenge
'http://admin:admin\@power/outlet?5=CCL'
172 Here is an example to reboot a virtual box on the current host
173 with the name
"Guest".
174 POWER_CYCLE
= virsh destroy Guest
; sleep 5; virsh start Guest
177 $config_help{"CONSOLE"} = << "EOF"
178 The script
or command that reads the console
180 If you
use ttywatch server
, something like the following would work
.
181 CONSOLE
= nc
-d localhost
3001
183 For a virtual machine with guest name
"Guest".
184 CONSOLE
= virsh console Guest
187 $config_help{"LOCALVERSION"} = << "EOF"
188 Required version ending to differentiate the test
189 from other linux builds on the
system.
192 $config_help{"REBOOT_TYPE"} = << "EOF"
193 Way to reboot the box to the test kernel
.
194 Only valid options so far are
"grub" and "script".
196 If you specify grub
, it will assume grub version
1
197 and will search
in /boot/grub
/menu
.lst
for the title \
$GRUB_MENU
198 and select that target to reboot to the kernel
. If this is
not
199 your setup
, then specify
"script" and have a command
or script
200 specified
in REBOOT_SCRIPT to boot to the target
.
202 The entry
in /boot/grub
/menu
.lst must be entered
in manually
.
203 The test will
not modify that file
.
206 $config_help{"GRUB_MENU"} = << "EOF"
207 The grub title name
for the test kernel to boot
208 (Only mandatory
if REBOOT_TYPE
= grub
)
210 Note
, ktest
.pl will
not update the grub menu
.lst
, you need to
211 manually add an option
for the test
. ktest
.pl will search
212 the grub menu
.lst
for this option to find what kernel to
215 For example
, if in the
/boot/grub
/menu
.lst the test kernel title has
:
218 GRUB_MENU
= Test Kernel
221 $config_help{"REBOOT_SCRIPT"} = << "EOF"
222 A script to reboot the target into the test kernel
223 (Only mandatory
if REBOOT_TYPE
= script
)
233 print "$prompt [Y/n] ";
236 if ($ans =~ /^\s*$/) {
239 last if ($ans =~ /^y$/i || $ans =~ /^n$/i);
240 print "Please answer either 'y' or 'n'.\n";
242 if ($ans !~ /^y$/i) {
248 sub get_ktest_config
{
251 return if (defined($opt{$config}));
253 if (defined($config_help{$config})) {
255 print $config_help{$config};
260 if (defined($default{$config})) {
261 print "\[$default{$config}\] ";
263 $entered_configs{$config} = <STDIN
>;
264 $entered_configs{$config} =~ s/^\s*(.*\S)\s*$/$1/;
265 if ($entered_configs{$config} =~ /^\s*$/) {
266 if ($default{$config}) {
267 $entered_configs{$config} = $default{$config};
269 print "Your answer can not be blank\n";
277 sub get_ktest_configs
{
278 get_ktest_config
("MACHINE");
279 get_ktest_config
("SSH_USER");
280 get_ktest_config
("BUILD_DIR");
281 get_ktest_config
("OUTPUT_DIR");
282 get_ktest_config
("BUILD_TARGET");
283 get_ktest_config
("TARGET_IMAGE");
284 get_ktest_config
("POWER_CYCLE");
285 get_ktest_config
("CONSOLE");
286 get_ktest_config
("LOCALVERSION");
288 my $rtype = $opt{"REBOOT_TYPE"};
290 if (!defined($rtype)) {
291 if (!defined($opt{"GRUB_MENU"})) {
292 get_ktest_config
("REBOOT_TYPE");
293 $rtype = $entered_configs{"REBOOT_TYPE"};
299 if ($rtype eq "grub") {
300 get_ktest_config
("GRUB_MENU");
302 get_ktest_config
("REBOOT_SCRIPT");
306 sub process_variables
{
310 # We want to check for '\', and it is just easier
311 # to check the previous characet of '$' and not need
312 # to worry if '$' is the first character. By adding
313 # a space to $value, we can just check [^\\]\$ and
314 # it will still work.
317 while ($value =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
321 # append beginning of value to retval
322 $retval = "$retval$begin";
323 if (defined($variable{$var})) {
324 $retval = "$retval$variable{$var}";
326 # put back the origin piece.
327 $retval = "$retval\$\{$var\}";
331 $retval = "$retval$value";
333 # remove the space added in the beginning
340 my ($lvalue, $rvalue) = @_;
342 if (defined($opt{$lvalue})) {
343 die "Error: Option $lvalue defined more than once!\n";
345 if ($rvalue =~ /^\s*$/) {
346 delete $opt{$lvalue};
348 $rvalue = process_variables
($rvalue);
349 $opt{$lvalue} = $rvalue;
354 my ($lvalue, $rvalue) = @_;
356 if ($rvalue =~ /^\s*$/) {
357 delete $variable{$lvalue};
359 $rvalue = process_variables
($rvalue);
360 $variable{$lvalue} = $rvalue;
364 sub process_compare
{
365 my ($lval, $cmp, $rval) = @_;
376 return $lval eq $rval;
377 } elsif ($cmp eq "!=") {
378 return $lval ne $rval;
381 my $statement = "$lval $cmp $rval";
382 my $ret = eval $statement;
384 # $@ stores error of eval
393 my ($name, $value) = @_;
395 my $val = process_variables
($value);
397 if ($val =~ /(.*)(==|\!=|>=|<=|>|<)(.*)/) {
398 my $ret = process_compare
($1, $2, $3);
400 die "$name: $.: Unable to process comparison\n";
405 if ($val =~ /^\s*0\s*$/) {
407 } elsif ($val =~ /^\s*\d+\s*$/) {
411 die ("$name: $.: Undefined variable $val in if statement\n");
416 my ($config, $current_test_num) = @_;
419 open($in, $config) || die "can't read file $config";
422 $name =~ s
,.*/(.*),$1,;
424 my $test_num = $$current_test_num;
427 my $num_tests_set = 0;
436 # ignore blank lines and comments
437 next if (/^\s*$/ || /\s*\#/);
439 if (/^\s*TEST_START(.*)/) {
443 if ($num_tests_set) {
444 die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
447 my $old_test_num = $test_num;
448 my $old_repeat = $repeat;
450 $test_num += $repeat;
454 if ($rest =~ /\s+SKIP\b(.*)/) {
462 if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) {
465 $repeat_tests{"$test_num"} = $repeat;
468 if ($rest =~ /\sIF\s+(.*)/) {
470 if (process_if
($name, $1)) {
480 if ($rest !~ /^\s*$/) {
481 die "$name: $.: Gargbage found after TEST_START\n$_";
485 $test_num = $old_test_num;
486 $repeat = $old_repeat;
489 } elsif (/^\s*DEFAULTS(.*)$/) {
494 if ($rest =~ /\s+SKIP(.*)/) {
501 if ($rest =~ /\sIF\s+(.*)/) {
503 if (process_if
($name, $1)) {
513 if ($rest !~ /^\s*$/) {
514 die "$name: $.: Gargbage found after DEFAULTS\n$_";
517 } elsif (/^\s*ELSE\b(.*)$/) {
519 die "$name: $.: ELSE found with out matching IF section\n$_";
528 if ($rest =~ /\sIF\s+(.*)/) {
529 # May be a ELSE IF section.
530 if (!process_if
($name, $1)) {
539 if ($rest !~ /^\s*$/) {
540 die "$name: $.: Gargbage found after DEFAULTS\n$_";
543 } elsif (/^\s*INCLUDE\s+(\S+)/) {
548 die "$name: $.: INCLUDE can only be done in default sections\n$_";
551 my $file = process_variables
($1);
553 if ($file !~ m
,^/,) {
554 # check the path of the config file first
555 if ($config =~ m
,(.*)/,) {
563 die "$name: $.: Can't read file $file\n$_";
566 if (__read_config
($file, \
$test_num)) {
570 } elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) {
578 ($lvalue eq "NUM_TESTS" ||
579 $lvalue eq "LOG_FILE" ||
580 $lvalue eq "CLEAR_LOG")) {
581 die "$name: $.: $lvalue must be set in DEFAULTS section\n";
584 if ($lvalue eq "NUM_TESTS") {
586 die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
589 die "$name: $.: NUM_TESTS must be set in default section\n";
594 if ($default || $lvalue =~ /\[\d+\]$/) {
595 set_value
($lvalue, $rvalue);
597 my $val = "$lvalue\[$test_num\]";
598 set_value
($val, $rvalue);
601 $repeats{$val} = $repeat;
604 } elsif (/^\s*([A-Z_\[\]\d]+)\s*:=\s*(.*?)\s*$/) {
610 # process config variables.
611 # Config variables are only active while reading the
612 # config and can be defined anywhere. They also ignore
613 # TEST_START and DEFAULTS, but are skipped if they are in
614 # on of these sections that have SKIP defined.
615 # The save variable can be
616 # defined multiple times and the new one simply overrides
618 set_variable
($lvalue, $rvalue);
621 die "$name: $.: Garbage found in config\n$_";
626 $test_num += $repeat - 1;
627 $opt{"NUM_TESTS"} = $test_num;
632 $$current_test_num = $test_num;
643 $test_case = __read_config
$config, \
$test_num;
645 # make sure we have all mandatory configs
648 # was a test specified?
650 print "No test case specified.\n";
651 print "What test case would you like to run?\n";
654 $default{"TEST_TYPE"} = $ans;
659 foreach my $default (keys %default) {
660 if (!defined($opt{$default})) {
661 $opt{$default} = $default{$default};
667 my ($option, $i) = @_;
669 # Add space to evaluate the character before $
670 $option = " $option";
673 while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
678 # Append beginning of line
679 $retval = "$retval$start";
681 # If the iteration option OPT[$i] exists, then use that.
682 # otherwise see if the default OPT (without [$i]) exists.
684 my $o = "$var\[$i\]";
686 if (defined($opt{$o})) {
688 $retval = "$retval$o";
689 } elsif (defined($opt{$var})) {
691 $retval = "$retval$o";
693 $retval = "$retval\$\{$var\}";
699 $retval = "$retval$option";
707 my ($option, $i) = @_;
711 # Since an option can evaluate to another option,
712 # keep iterating until we do not evaluate any more
715 while ($prev ne $option) {
716 # Check for recursive evaluations.
717 # 100 deep should be more than enough.
719 die "Over 100 evaluations accurred with $option\n" .
720 "Check for recursive variables\n";
723 $option = __eval_option
($option, $i);
730 if (defined($opt{"LOG_FILE"})) {
731 open(OUT
, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}";
738 if (defined($opt{"LOG_FILE"})) {
753 sub wait_for_monitor
;
758 if (defined($time)) {
760 # flush out current monitor
761 # May contain the reboot success line
765 # try to reboot normally
766 if (run_command
$reboot) {
767 if (defined($powercycle_after_reboot)) {
768 sleep $powercycle_after_reboot;
769 run_command
"$power_cycle";
772 # nope? power cycle it.
773 run_command
"$power_cycle";
776 if (defined($time)) {
777 wait_for_monitor
($time, $reboot_success_line);
785 return $test_type eq "build" || $no_reboot ||
786 ($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") ||
787 ($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build");
791 doprint
"CRITICAL FAILURE... ", @_, "\n";
795 if ($reboot_on_error && !do_not_reboot
) {
797 doprint
"REBOOTING\n";
800 } elsif ($poweroff_on_error && defined($power_off)) {
801 doprint
"POWERING OFF\n";
805 if (defined($opt{"LOG_FILE"})) {
806 print " See $opt{LOG_FILE} for more info.\n";
817 my $pid = open($fp, "$console|") or
818 dodie
"Can't open console $console";
820 $flags = fcntl($fp, F_GETFL
, 0) or
821 dodie
"Can't get flags for the socket: $!";
822 $flags = fcntl($fp, F_SETFL
, $flags | O_NONBLOCK
) or
823 dodie
"Can't set flags for the socket: $!";
831 doprint
"kill child process $pid\n";
839 if ($monitor_cnt++) {
842 $monitor_fp = \
*MONFD
;
843 $monitor_pid = open_console
$monitor_fp;
847 open(MONFD
, "Stop perl from warning about single use of MONFD");
851 if (--$monitor_cnt) {
854 close_console
($monitor_fp, $monitor_pid);
857 sub wait_for_monitor
{
858 my ($time, $stop) = @_;
863 doprint
"** Wait for monitor to settle down **\n";
865 # read the monitor and wait for the system to calm down
867 $line = wait_for_input
($monitor_fp, $time);
868 last if (!defined($line));
872 if (defined($stop) && $full_line =~ /$stop/) {
873 doprint
"wait for monitor detected $stop\n";
881 print "** Monitor flushed **\n";
886 if ($die_on_failure) {
894 # no need to reboot for just building.
895 if (!do_not_reboot
) {
896 doprint
"REBOOTING\n";
902 if (defined($test_name)) {
903 $name = " ($test_name)";
906 doprint
"%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
907 doprint
"%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
908 doprint
"KTEST RESULT: TEST $i$name Failed: ", @_, "\n";
909 doprint
"%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
910 doprint
"%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
912 return 1 if (!defined($store_failures));
915 my $date = sprintf "%04d%02d%02d%02d%02d%02d",
916 1900+$t[5],$t[4],$t[3],$t[2],$t[1],$t[0];
918 my $type = $build_type;
919 if ($type =~ /useconfig/) {
923 my $dir = "$machine-$test_type-$type-fail-$date";
924 my $faildir = "$store_failures/$dir";
928 die "can't create $faildir";
930 if (-f
"$output_config") {
931 cp
"$output_config", "$faildir/config" or
932 die "failed to copy .config";
935 cp
$buildlog, "$faildir/buildlog" or
936 die "failed to move $buildlog";
939 cp
$dmesg, "$faildir/dmesg" or
940 die "failed to move $dmesg";
943 doprint
"*** Saved info to $faildir ***\n";
954 $command =~ s/\$SSH_USER/$ssh_user/g;
955 $command =~ s/\$MACHINE/$machine/g;
957 doprint
("$command ... ");
959 $pid = open(CMD
, "$command 2>&1 |") or
960 (fail
"unable to exec $command" and return 0);
962 if (defined($opt{"LOG_FILE"})) {
963 open(LOG
, ">>$opt{LOG_FILE}") or
964 dodie
"failed to write to log";
968 if (defined($redirect)) {
969 open (RD
, ">$redirect") or
970 dodie
"failed to write to redirect $redirect";
975 print LOG
if ($dolog);
983 close(LOG
) if ($dolog);
984 close(RD
) if ($dord);
997 my $cp_exec = $ssh_exec;
999 $cp_exec =~ s/\$SSH_COMMAND/$cmd/g;
1000 return run_command
"$cp_exec";
1004 my ($src, $dst) = @_;
1005 my $cp_scp = $scp_to_target;
1007 $cp_scp =~ s/\$SRC_FILE/$src/g;
1008 $cp_scp =~ s/\$DST_FILE/$dst/g;
1010 return run_command
"$cp_scp";
1013 sub get_grub_index
{
1015 if ($reboot_type ne "grub") {
1018 return if (defined($grub_number));
1020 doprint
"Find grub menu ... ";
1023 my $ssh_grub = $ssh_exec;
1024 $ssh_grub =~ s
,\
$SSH_COMMAND,cat
/boot/grub
/menu
.lst
,g
;
1026 open(IN
, "$ssh_grub |")
1027 or die "unable to get menu.lst";
1032 if (/^\s*title\s+$grub_menu\s*$/) {
1036 } elsif (/^\s*title\s/) {
1042 die "Could not find '$grub_menu' in /boot/grub/menu on $machine"
1044 doprint
"$grub_number\n";
1049 my ($fp, $time) = @_;
1055 if (!defined($time)) {
1060 vec($rin, fileno($fp), 1) = 1;
1061 $ready = select($rin, undef, undef, $time);
1065 # try to read one char at a time
1066 while (sysread $fp, $ch, 1) {
1068 last if ($ch eq "\n");
1071 if (!length($line)) {
1079 if ($reboot_type eq "grub") {
1080 run_ssh
"'(echo \"savedefault --default=$grub_number --once\" | grub --batch && reboot)'";
1084 run_command
"$reboot_script";
1090 doprint
"git rev-list --max-count=1 $commit ... ";
1091 my $sha1 = `git rev-list --max-count=1 $commit`;
1098 dodie
"Failed to get git $commit";
1111 my $skip_call_trace = 0;
1119 open(DMESG
, "> $dmesg") or
1120 die "unable to write to $dmesg";
1126 my $monitor_start = time;
1128 my $version_found = 0;
1132 if ($bug && defined($stop_after_failure) &&
1133 $stop_after_failure >= 0) {
1134 my $time = $stop_after_failure - (time - $failure_start);
1135 $line = wait_for_input
($monitor_fp, $time);
1136 if (!defined($line)) {
1137 doprint
"bug timed out after $booted_timeout seconds\n";
1138 doprint
"Test forced to stop after $stop_after_failure seconds after failure\n";
1142 $line = wait_for_input
($monitor_fp, $booted_timeout);
1143 if (!defined($line)) {
1144 my $s = $booted_timeout == 1 ?
"" : "s";
1145 doprint
"Successful boot found: break after $booted_timeout second$s\n";
1149 $line = wait_for_input
($monitor_fp);
1150 if (!defined($line)) {
1151 my $s = $timeout == 1 ?
"" : "s";
1152 doprint
"Timed out after $timeout second$s\n";
1160 # we are not guaranteed to get a full line
1161 $full_line .= $line;
1163 if ($full_line =~ /$success_line/) {
1165 $success_start = time;
1168 if ($booted && defined($stop_after_success) &&
1169 $stop_after_success >= 0) {
1171 if ($now - $success_start >= $stop_after_success) {
1172 doprint
"Test forced to stop after $stop_after_success seconds after success\n";
1177 if ($full_line =~ /\[ backtrace testing \]/) {
1178 $skip_call_trace = 1;
1181 if ($full_line =~ /call trace:/i) {
1182 if (!$bug && !$skip_call_trace) {
1184 $failure_start = time;
1188 if ($bug && defined($stop_after_failure) &&
1189 $stop_after_failure >= 0) {
1191 if ($now - $failure_start >= $stop_after_failure) {
1192 doprint
"Test forced to stop after $stop_after_failure seconds after failure\n";
1197 if ($full_line =~ /\[ end of backtrace testing \]/) {
1198 $skip_call_trace = 0;
1201 if ($full_line =~ /Kernel panic -/) {
1202 $failure_start = time;
1206 # Detect triple faults by testing the banner
1207 if ($full_line =~ /\bLinux version (\S+).*\n/) {
1208 if ($1 eq $version) {
1210 } elsif ($version_found && $detect_triplefault) {
1211 # We already booted into the kernel we are testing,
1212 # but now we booted into another kernel?
1213 # Consider this a triple fault.
1214 doprint
"Aleady booted in Linux kernel $version, but now\n";
1215 doprint
"we booted into Linux kernel $1.\n";
1216 doprint
"Assuming that this is a triple fault.\n";
1217 doprint
"To disable this: set DETECT_TRIPLE_FAULT to 0\n";
1222 if ($line =~ /\n/) {
1226 if ($stop_test_after > 0 && !$booted && !$bug) {
1227 if (time - $monitor_start > $stop_test_after) {
1228 doprint
"STOP_TEST_AFTER ($stop_test_after seconds) timed out\n";
1237 return 0 if ($in_bisect);
1238 fail
"failed - got a bug report" and return 0;
1242 return 0 if ($in_bisect);
1243 fail
"failed - never got a boot prompt." and return 0;
1249 sub do_post_install
{
1251 return if (!defined($post_install));
1253 my $cp_post_install = $post_install;
1254 $cp_post_install =~ s/\$KERNEL_VERSION/$version/g;
1255 run_command
"$cp_post_install" or
1256 dodie
"Failed to run post install";
1261 return if ($no_install);
1263 run_scp
"$outputdir/$build_target", "$target_image" or
1264 dodie
"failed to copy image";
1266 my $install_mods = 0;
1268 # should we process modules?
1270 open(IN
, "$output_config") or dodie
("Can't read config file");
1272 if (/CONFIG_MODULES(=y)?/) {
1273 $install_mods = 1 if (defined($1));
1279 if (!$install_mods) {
1281 doprint
"No modules needed\n";
1285 run_command
"$make INSTALL_MOD_PATH=$tmpdir modules_install" or
1286 dodie
"Failed to install modules";
1288 my $modlib = "/lib/modules/$version";
1289 my $modtar = "ktest-mods.tar.bz2";
1291 run_ssh
"rm -rf $modlib" or
1292 dodie
"failed to remove old mods: $modlib";
1294 # would be nice if scp -r did not follow symbolic links
1295 run_command
"cd $tmpdir && tar -cjf $modtar lib/modules/$version" or
1296 dodie
"making tarball";
1298 run_scp
"$tmpdir/$modtar", "/tmp" or
1299 dodie
"failed to copy modules";
1301 unlink "$tmpdir/$modtar";
1303 run_ssh
"'(cd / && tar xjf /tmp/$modtar)'" or
1304 dodie
"failed to tar modules";
1306 run_ssh
"rm -f /tmp/$modtar";
1312 # get the release name
1313 doprint
"$make kernelrelease ... ";
1314 $version = `$make kernelrelease | tail -1`;
1316 doprint
"$version\n";
1319 sub start_monitor_and_boot
{
1328 sub check_buildlog
{
1331 my @files = `git show $patch | diffstat -l`;
1333 open(IN
, "git show $patch |") or
1334 dodie
"failed to show $patch";
1336 if (m
,^--- a
/(.*),) {
1338 $files[$#files] = $1;
1343 open(IN
, $buildlog) or dodie
"Can't open $buildlog";
1345 if (/^\s*(.*?):.*(warning|error)/) {
1347 foreach my $file (@files) {
1348 my $fullpath = "$builddir/$file";
1349 if ($file eq $err || $fullpath eq $err) {
1350 fail
"$file built with warnings" and return 0;
1360 sub apply_min_config
{
1361 my $outconfig = "$output_config.new";
1363 # Read the config file and remove anything that
1364 # is in the force_config hash (from minconfig and others)
1365 # then add the force config back.
1367 doprint
"Applying minimum configurations into $output_config.new\n";
1369 open (OUT
, ">$outconfig") or
1370 dodie
"Can't create $outconfig";
1372 if (-f
$output_config) {
1373 open (IN
, $output_config) or
1374 dodie
"Failed to open $output_config";
1376 if (/^(# )?(CONFIG_[^\s=]*)/) {
1377 next if (defined($force_config{$2}));
1383 foreach my $config (keys %force_config) {
1384 print OUT
"$force_config{$config}\n";
1388 run_command
"mv $outconfig $output_config";
1391 sub make_oldconfig
{
1393 my @force_list = keys %force_config;
1395 if ($#force_list >= 0) {
1399 if (!run_command
"$make oldnoconfig") {
1400 # Perhaps oldnoconfig doesn't exist in this version of the kernel
1401 # try a yes '' | oldconfig
1402 doprint
"oldnoconfig failed, trying yes '' | make oldconfig\n";
1403 run_command
"yes '' | $make oldconfig" or
1404 dodie
"failed make config oldconfig";
1408 # read a config file and use this to force new configs.
1409 sub load_force_config
{
1412 open(IN
, $config) or
1413 dodie
"failed to read $config";
1416 if (/^(CONFIG[^\s=]*)(\s*=.*)/) {
1417 $force_config{$1} = $_;
1418 } elsif (/^# (CONFIG_\S*) is not set/) {
1419 $force_config{$1} = $_;
1430 # Failed builds should not reboot the target
1431 my $save_no_reboot = $no_reboot;
1434 if (defined($pre_build)) {
1435 my $ret = run_command
$pre_build;
1436 if (!$ret && defined($pre_build_die) &&
1438 dodie
"failed to pre_build\n";
1442 if ($type =~ /^useconfig:(.*)/) {
1443 run_command
"cp $1 $output_config" or
1444 dodie
"could not copy $1 to .config";
1446 $type = "oldconfig";
1449 # old config can ask questions
1450 if ($type eq "oldconfig") {
1451 $type = "oldnoconfig";
1453 # allow for empty configs
1454 run_command
"touch $output_config";
1457 run_command
"mv $output_config $outputdir/config_temp" or
1458 dodie
"moving .config";
1460 run_command
"$make mrproper" or dodie
"make mrproper";
1462 run_command
"mv $outputdir/config_temp $output_config" or
1463 dodie
"moving config_temp";
1466 } elsif (!$noclean) {
1467 unlink "$output_config";
1468 run_command
"$make mrproper" or
1469 dodie
"make mrproper";
1472 # add something to distinguish this build
1473 open(OUT
, "> $outputdir/localversion") or dodie
("Can't make localversion file");
1474 print OUT
"$localversion\n";
1477 if (defined($minconfig)) {
1478 load_force_config
($minconfig);
1481 if ($type ne "oldnoconfig") {
1482 run_command
"$make $type" or
1483 dodie
"failed make config";
1485 # Run old config regardless, to enforce min configurations
1488 $redirect = "$buildlog";
1489 my $build_ret = run_command
"$make $build_options";
1492 if (defined($post_build)) {
1493 my $ret = run_command
$post_build;
1494 if (!$ret && defined($post_build_die) &&
1496 dodie
"failed to post_build\n";
1501 # bisect may need this to pass
1503 $no_reboot = $save_no_reboot;
1506 fail
"failed build" and return 0;
1509 $no_reboot = $save_no_reboot;
1515 if (!run_ssh
"halt" or defined($power_off)) {
1516 if (defined($poweroff_after_halt)) {
1517 sleep $poweroff_after_halt;
1518 run_command
"$power_off";
1522 run_command
"$power_off";
1533 if (defined($test_name)) {
1534 $name = " ($test_name)";
1537 doprint
"\n\n*******************************************\n";
1538 doprint
"*******************************************\n";
1539 doprint
"KTEST RESULT: TEST $i$name SUCCESS!!!! **\n";
1540 doprint
"*******************************************\n";
1541 doprint
"*******************************************\n";
1543 if ($i != $opt{"NUM_TESTS"} && !do_not_reboot
) {
1544 doprint
"Reboot and wait $sleep_time seconds\n";
1551 doprint
"Pass or fail? [p/f]";
1554 if ($ans eq "p" || $ans eq "P") {
1556 } elsif ($ans eq "f" || $ans eq "F") {
1559 print "Please answer 'P' or 'F'\n";
1564 sub child_run_test
{
1567 # child should have no power
1568 $reboot_on_error = 0;
1569 $poweroff_on_error = 0;
1570 $die_on_failure = 1;
1572 run_command
$run_test or $failed = 1;
1578 sub child_finished
{
1591 doprint
"run test $run_test\n";
1595 $SIG{CHLD
} = qw(child_finished);
1599 child_run_test
if (!$child_pid);
1604 $line = wait_for_input
($monitor_fp, 1);
1605 if (defined($line)) {
1607 # we are not guaranteed to get a full line
1608 $full_line .= $line;
1611 if ($full_line =~ /call trace:/i) {
1615 if ($full_line =~ /Kernel panic -/) {
1619 if ($line =~ /\n/) {
1623 } while (!$child_done && !$bug);
1626 my $failure_start = time;
1629 $line = wait_for_input
($monitor_fp, 1);
1630 if (defined($line)) {
1634 if ($now - $failure_start >= $stop_after_failure) {
1637 } while (defined($line));
1639 doprint
"Detected kernel crash!\n";
1640 # kill the child with extreme prejudice
1644 waitpid $child_pid, 0;
1647 if ($bug || $child_exit) {
1648 return 0 if $in_bisect;
1649 fail
"test failed" and return 0;
1654 sub run_git_bisect
{
1657 doprint
"$command ... ";
1659 my $output = `$command 2>&1`;
1666 dodie
"Failed to git bisect";
1669 doprint
"SUCCESS\n";
1670 if ($output =~ m/^(Bisecting: .*\(roughly \d+ steps?\))\s+\[([[:xdigit:]]+)\]/) {
1671 doprint
"$1 [$2]\n";
1672 } elsif ($output =~ m/^([[:xdigit:]]+) is the first bad commit/) {
1674 doprint
"Found bad commit... $1\n";
1677 # we already logged it, just print it now.
1685 doprint
"Reboot and sleep $bisect_sleep_time seconds\n";
1686 reboot
$bisect_sleep_time;
1689 # returns 1 on success, 0 on failure, -1 on skip
1690 sub run_bisect_test
{
1691 my ($type, $buildtype) = @_;
1700 build
$buildtype or $failed = 1;
1702 if ($type ne "build") {
1703 if ($failed && $bisect_skip) {
1707 dodie
"Failed on build" if $failed;
1710 start_monitor_and_boot
or $failed = 1;
1712 if ($type ne "boot") {
1713 if ($failed && $bisect_skip) {
1719 dodie
"Failed on boot" if $failed;
1721 do_run_test
or $failed = 1;
1732 # reboot the box to a kernel we can ssh to
1733 if ($type ne "build") {
1743 my $buildtype = "oldconfig";
1745 # We should have a minconfig to use?
1746 if (defined($minconfig)) {
1747 $buildtype = "useconfig:$minconfig";
1750 my $ret = run_bisect_test
$type, $buildtype;
1752 if ($bisect_manual) {
1753 $ret = answer_bisect
;
1756 # Are we looking for where it worked, not failed?
1757 if ($reverse_bisect) {
1763 } elsif ($ret == 0) {
1765 } elsif ($bisect_skip) {
1766 doprint
"HIT A BAD COMMIT ... SKIPPING\n";
1776 die "BISECT_GOOD[$i] not defined\n" if (!defined($opt{"BISECT_GOOD[$i]"}));
1777 die "BISECT_BAD[$i] not defined\n" if (!defined($opt{"BISECT_BAD[$i]"}));
1778 die "BISECT_TYPE[$i] not defined\n" if (!defined($opt{"BISECT_TYPE[$i]"}));
1780 my $good = $opt{"BISECT_GOOD[$i]"};
1781 my $bad = $opt{"BISECT_BAD[$i]"};
1782 my $type = $opt{"BISECT_TYPE[$i]"};
1783 my $start = $opt{"BISECT_START[$i]"};
1784 my $replay = $opt{"BISECT_REPLAY[$i]"};
1785 my $start_files = $opt{"BISECT_FILES[$i]"};
1787 if (defined($start_files)) {
1788 $start_files = " -- " . $start_files;
1793 # convert to true sha1's
1794 $good = get_sha1
($good);
1795 $bad = get_sha1
($bad);
1797 if (defined($opt{"BISECT_REVERSE[$i]"}) &&
1798 $opt{"BISECT_REVERSE[$i]"} == 1) {
1799 doprint
"Performing a reverse bisect (bad is good, good is bad!)\n";
1800 $reverse_bisect = 1;
1802 $reverse_bisect = 0;
1805 # Can't have a test without having a test to run
1806 if ($type eq "test" && !defined($run_test)) {
1810 my $check = $opt{"BISECT_CHECK[$i]"};
1811 if (defined($check) && $check ne "0") {
1814 my $head = get_sha1
("HEAD");
1816 if ($check ne "good") {
1817 doprint
"TESTING BISECT BAD [$bad]\n";
1818 run_command
"git checkout $bad" or
1819 die "Failed to checkout $bad";
1821 $result = run_bisect
$type;
1823 if ($result ne "bad") {
1824 fail
"Tested BISECT_BAD [$bad] and it succeeded" and return 0;
1828 if ($check ne "bad") {
1829 doprint
"TESTING BISECT GOOD [$good]\n";
1830 run_command
"git checkout $good" or
1831 die "Failed to checkout $good";
1833 $result = run_bisect
$type;
1835 if ($result ne "good") {
1836 fail
"Tested BISECT_GOOD [$good] and it failed" and return 0;
1840 # checkout where we started
1841 run_command
"git checkout $head" or
1842 die "Failed to checkout $head";
1845 run_command
"git bisect start$start_files" or
1846 dodie
"could not start bisect";
1848 run_command
"git bisect good $good" or
1849 dodie
"could not set bisect good to $good";
1851 run_git_bisect
"git bisect bad $bad" or
1852 dodie
"could not set bisect bad to $bad";
1854 if (defined($replay)) {
1855 run_command
"git bisect replay $replay" or
1856 dodie
"failed to run replay";
1859 if (defined($start)) {
1860 run_command
"git checkout $start" or
1861 dodie
"failed to checkout $start";
1866 $result = run_bisect
$type;
1867 $test = run_git_bisect
"git bisect $result";
1870 run_command
"git bisect log" or
1871 dodie
"could not capture git bisect log";
1873 run_command
"git bisect reset" or
1874 dodie
"could not reset git bisect";
1876 doprint
"Bad commit was [$bisect_bad]\n";
1889 sub assign_configs
{
1890 my ($hash, $config) = @_;
1893 or dodie
"Failed to read $config";
1896 if (/^((CONFIG\S*)=.*)/) {
1904 sub process_config_ignore
{
1907 assign_configs \
%config_ignore, $config;
1910 sub read_current_config
{
1911 my ($config_ref) = @_;
1913 %{$config_ref} = ();
1914 undef %{$config_ref};
1916 my @key = keys %{$config_ref};
1918 print "did not delete!\n";
1921 open (IN
, "$output_config");
1924 if (/^(CONFIG\S+)=(.*)/) {
1925 ${$config_ref}{$1} = $2;
1931 sub get_dependencies
{
1934 my $arr = $dependency{$config};
1935 if (!defined($arr)) {
1941 foreach my $dep (@
{$arr}) {
1942 print "ADD DEP $dep\n";
1943 @deps = (@deps, get_dependencies
$dep);
1952 open(OUT
, ">$output_config") or dodie
"Can not write to $output_config";
1954 foreach my $config (@configs) {
1955 print OUT
"$config_set{$config}\n";
1956 my @deps = get_dependencies
$config;
1957 foreach my $dep (@deps) {
1958 print OUT
"$config_set{$dep}\n";
1962 foreach my $config (keys %config_ignore) {
1963 print OUT
"$config_ignore{$config}\n";
1971 sub compare_configs
{
1974 foreach my $item (keys %a) {
1975 if (!defined($b{$item})) {
1976 print "diff $item\n";
1984 print "diff2 $keys[0]\n";
1986 return -1 if ($#keys >= 0);
1991 sub run_config_bisect_test
{
1994 return run_bisect_test
$type, "oldconfig";
1997 sub process_passed
{
2000 doprint
"These configs had no failure: (Enabling them for further compiles)\n";
2001 # Passed! All these configs are part of a good compile.
2002 # Add them to the min options.
2003 foreach my $config (keys %configs) {
2004 if (defined($config_list{$config})) {
2005 doprint
" removing $config\n";
2006 $config_ignore{$config} = $config_list{$config};
2007 delete $config_list{$config};
2010 doprint
"config copied to $outputdir/config_good\n";
2011 run_command
"cp -f $output_config $outputdir/config_good";
2014 sub process_failed
{
2017 doprint
"\n\n***************************************\n";
2018 doprint
"Found bad config: $config\n";
2019 doprint
"***************************************\n\n";
2022 sub run_config_bisect
{
2024 my @start_list = keys %config_list;
2026 if ($#start_list < 0) {
2027 doprint
"No more configs to test!!!\n";
2031 doprint
"***** RUN TEST ***\n";
2032 my $type = $opt{"CONFIG_BISECT_TYPE[$iteration]"};
2036 my $count = $#start_list + 1;
2037 doprint
" $count configs to test\n";
2039 my $half = int($#start_list / 2);
2042 my @tophalf = @start_list[0 .. $half];
2044 create_config
@tophalf;
2045 read_current_config \
%current_config;
2047 $count = $#tophalf + 1;
2048 doprint
"Testing $count configs\n";
2050 # make sure we test something
2051 foreach my $config (@tophalf) {
2052 if (defined($current_config{$config})) {
2058 # try the other half
2059 doprint
"Top half produced no set configs, trying bottom half\n";
2060 @tophalf = @start_list[$half + 1 .. $#start_list];
2061 create_config
@tophalf;
2062 read_current_config \
%current_config;
2063 foreach my $config (@tophalf) {
2064 if (defined($current_config{$config})) {
2070 doprint
"Failed: Can't make new config with current configs\n";
2071 foreach my $config (@start_list) {
2072 doprint
" CONFIG: $config\n";
2076 $count = $#tophalf + 1;
2077 doprint
"Testing $count configs\n";
2080 $ret = run_config_bisect_test
$type;
2081 if ($bisect_manual) {
2082 $ret = answer_bisect
;
2085 process_passed
%current_config;
2089 doprint
"This config had a failure.\n";
2090 doprint
"Removing these configs that were not set in this config:\n";
2091 doprint
"config copied to $outputdir/config_bad\n";
2092 run_command
"cp -f $output_config $outputdir/config_bad";
2094 # A config exists in this group that was bad.
2095 foreach my $config (keys %config_list) {
2096 if (!defined($current_config{$config})) {
2097 doprint
" removing $config\n";
2098 delete $config_list{$config};
2102 @start_list = @tophalf;
2104 if ($#start_list == 0) {
2105 process_failed
$start_list[0];
2109 # remove half the configs we are looking at and see if
2111 $half = int($#start_list / 2);
2112 } while ($#start_list > 0);
2114 # we found a single config, try it again unless we are running manually
2116 if ($bisect_manual) {
2117 process_failed
$start_list[0];
2121 my @tophalf = @start_list[0 .. 0];
2123 $ret = run_config_bisect_test
$type;
2125 process_passed
%current_config;
2129 process_failed
$start_list[0];
2136 my $start_config = $opt{"CONFIG_BISECT[$i]"};
2138 my $tmpconfig = "$tmpdir/use_config";
2140 if (defined($config_bisect_good)) {
2141 process_config_ignore
$config_bisect_good;
2144 # Make the file with the bad config and the min config
2145 if (defined($minconfig)) {
2146 # read the min config for things to ignore
2147 run_command
"cp $minconfig $tmpconfig" or
2148 dodie
"failed to copy $minconfig to $tmpconfig";
2153 if (-f
$tmpconfig) {
2154 load_force_config
($tmpconfig);
2155 process_config_ignore
$tmpconfig;
2158 # now process the start config
2159 run_command
"cp $start_config $output_config" or
2160 dodie
"failed to copy $start_config to $output_config";
2162 # read directly what we want to check
2164 open (IN
, $output_config)
2165 or dodie
"faied to open $output_config";
2168 if (/^((CONFIG\S*)=.*)/) {
2169 $config_check{$2} = $1;
2174 # Now run oldconfig with the minconfig
2177 # check to see what we lost (or gained)
2178 open (IN
, $output_config)
2179 or dodie
"Failed to read $start_config";
2181 my %removed_configs;
2185 if (/^((CONFIG\S*)=.*)/) {
2186 # save off all options
2187 $config_set{$2} = $1;
2188 if (defined($config_check{$2})) {
2189 if (defined($config_ignore{$2})) {
2190 $removed_configs{$2} = $1;
2192 $config_list{$2} = $1;
2194 } elsif (!defined($config_ignore{$2})) {
2195 $added_configs{$2} = $1;
2196 $config_list{$2} = $1;
2202 my @confs = keys %removed_configs;
2204 doprint
"Configs overridden by default configs and removed from check:\n";
2205 foreach my $config (@confs) {
2206 doprint
" $config\n";
2209 @confs = keys %added_configs;
2211 doprint
"Configs appearing in make oldconfig and added:\n";
2212 foreach my $config (@confs) {
2213 doprint
" $config\n";
2220 # Sometimes kconfig does weird things. We must make sure
2221 # that the config we autocreate has everything we need
2222 # to test, otherwise we may miss testing configs, or
2223 # may not be able to create a new config.
2224 # Here we create a config with everything set.
2225 create_config
(keys %config_list);
2226 read_current_config \
%config_test;
2227 foreach my $config (keys %config_list) {
2228 if (!defined($config_test{$config})) {
2231 doprint
"Configs not produced by kconfig (will not be checked):\n";
2233 doprint
" $config\n";
2234 delete $config_list{$config};
2239 $ret = run_config_bisect
;
2242 return $ret if ($ret < 0);
2247 sub patchcheck_reboot
{
2248 doprint
"Reboot and sleep $patchcheck_sleep_time seconds\n";
2249 reboot
$patchcheck_sleep_time;
2255 die "PATCHCHECK_START[$i] not defined\n"
2256 if (!defined($opt{"PATCHCHECK_START[$i]"}));
2257 die "PATCHCHECK_TYPE[$i] not defined\n"
2258 if (!defined($opt{"PATCHCHECK_TYPE[$i]"}));
2260 my $start = $opt{"PATCHCHECK_START[$i]"};
2263 if (defined($opt{"PATCHCHECK_END[$i]"})) {
2264 $end = $opt{"PATCHCHECK_END[$i]"};
2267 # Get the true sha1's since we can use things like HEAD~3
2268 $start = get_sha1
($start);
2269 $end = get_sha1
($end);
2271 my $type = $opt{"PATCHCHECK_TYPE[$i]"};
2273 # Can't have a test without having a test to run
2274 if ($type eq "test" && !defined($run_test)) {
2278 open (IN
, "git log --pretty=oneline $end|") or
2279 dodie
"could not get git list";
2285 $list[$#list+1] = $_;
2286 last if (/^$start/);
2290 if ($list[$#list] !~ /^$start/) {
2291 fail
"SHA1 $start not found";
2294 # go backwards in the list
2295 @list = reverse @list;
2297 my $save_clean = $noclean;
2298 my %ignored_warnings;
2300 if (defined($ignore_warnings)) {
2301 foreach my $sha1 (split /\s+/, $ignore_warnings) {
2302 $ignored_warnings{$sha1} = 1;
2307 foreach my $item (@list) {
2309 $sha1 =~ s/^([[:xdigit:]]+).*/$1/;
2311 doprint
"\nProcessing commit $item\n\n";
2313 run_command
"git checkout $sha1" or
2314 die "Failed to checkout $sha1";
2316 # only clean on the first and last patch
2317 if ($item eq $list[0] ||
2318 $item eq $list[$#list]) {
2319 $noclean = $save_clean;
2324 if (defined($minconfig)) {
2325 build
"useconfig:$minconfig" or return 0;
2327 # ?? no config to use?
2328 build
"oldconfig" or return 0;
2332 if (!defined($ignored_warnings{$sha1})) {
2333 check_buildlog
$sha1 or return 0;
2336 next if ($type eq "build");
2340 start_monitor_and_boot
or $failed = 1;
2342 if (!$failed && $type ne "boot"){
2343 do_run_test
or $failed = 1;
2346 return 0 if ($failed);
2364 # taken from streamline_config.pl
2376 if (! -f
$kconfig) {
2377 doprint
"file $kconfig does not exist, skipping\n";
2381 open(KIN
, "$kconfig")
2382 or die "Can't open $kconfig";
2386 # Make sure that lines ending with \ continue
2388 $_ = $line . " " . $_;
2399 # collect any Kconfig sources
2400 if (/^source\s*"(.*)"/) {
2401 $kconfigs[$#kconfigs+1] = $1;
2405 if (/^\s*(menu)?config\s+(\S+)\s*$/) {
2409 for (my $i = 0; $i < $iflevel; $i++) {
2411 $depends{$config} .= " " . $ifdeps[$i];
2413 $depends{$config} = $ifdeps[$i];
2418 # collect the depends for the config
2419 } elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
2421 if (defined($depends{$1})) {
2422 $depends{$config} .= " " . $1;
2424 $depends{$config} = $1;
2427 # Get the configs that select this config
2428 } elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) {
2429 if (defined($depends{$1})) {
2430 $depends{$1} .= " " . $config;
2432 $depends{$1} = $config;
2435 # Check for if statements
2436 } elsif (/^if\s+(.*\S)\s*$/) {
2438 # remove beginning and ending non text
2439 $deps =~ s/^[^a-zA-Z0-9_]*//;
2440 $deps =~ s/[^a-zA-Z0-9_]*$//;
2442 my @deps = split /[^a-zA-Z0-9_]+/, $deps;
2444 $ifdeps[$iflevel++] = join ':', @deps;
2446 } elsif (/^endif/) {
2448 $iflevel-- if ($iflevel);
2451 } elsif (/^\s*help\s*$/) {
2457 # read in any configs that were found.
2458 foreach $kconfig (@kconfigs) {
2459 if (!defined($read_kconfigs{$kconfig})) {
2460 $read_kconfigs{$kconfig} = 1;
2461 read_kconfig
("$builddir/$kconfig");
2467 # find out which arch this is by the kconfig file
2468 open (IN
, $output_config)
2469 or dodie
"Failed to read $output_config";
2472 if (m
,Linux
/(\S
+)\s
+\S
+\s
+Kernel Configuration
,) {
2479 if (!defined($arch)) {
2480 doprint
"Could not find arch from config file\n";
2481 doprint
"no dependencies used\n";
2485 # arch is really the subarch, we need to know
2486 # what directory to look at.
2487 if ($arch eq "i386" || $arch eq "x86_64") {
2489 } elsif ($arch =~ /^tile/) {
2493 my $kconfig = "$builddir/arch/$arch/Kconfig";
2495 if (! -f
$kconfig && $arch =~ /\d$/) {
2497 # some subarchs have numbers, truncate them
2499 $kconfig = "$builddir/arch/$arch/Kconfig";
2500 if (! -f
$kconfig) {
2501 doprint
"No idea what arch dir $orig is for\n";
2502 doprint
"no dependencies used\n";
2507 read_kconfig
($kconfig);
2510 sub read_config_list
{
2514 or dodie
"Failed to read $config";
2517 if (/^((CONFIG\S*)=.*)/) {
2518 if (!defined($config_ignore{$2})) {
2519 $config_list{$2} = $1;
2527 sub read_output_config
{
2530 assign_configs \
%config_ignore, $config;
2533 sub make_new_config
{
2536 open (OUT
, ">$output_config")
2537 or dodie
"Failed to write $output_config";
2539 foreach my $config (@configs) {
2540 print OUT
"$config\n";
2549 $kconfig =~ s/CONFIG_//;
2551 $dep = $depends{"$kconfig"};
2553 # the dep string we have saves the dependencies as they
2554 # were found, including expressions like ! && ||. We
2555 # want to split this out into just an array of configs.
2557 my $valid = "A-Za-z_0-9";
2561 while ($dep =~ /[$valid]/) {
2563 if ($dep =~ /^[^$valid]*([$valid]+)/) {
2564 my $conf = "CONFIG_" . $1;
2566 $configs[$#configs + 1] = $conf;
2568 $dep =~ s/^[^$valid]*[$valid]+//;
2570 die "this should never happen";
2580 my %processed_configs;
2581 my %nochange_config;
2583 sub test_this_config
{
2588 # if we already processed this config, skip it
2589 if (defined($processed_configs{$config})) {
2592 $processed_configs{$config} = 1;
2594 # if this config failed during this round, skip it
2595 if (defined($nochange_config{$config})) {
2599 my $kconfig = $config;
2600 $kconfig =~ s/CONFIG_//;
2602 # Test dependencies first
2603 if (defined($depends{"$kconfig"})) {
2604 my @parents = get_depends
$config;
2605 foreach my $parent (@parents) {
2606 # if the parent is in the min config, check it first
2607 next if (!defined($min_configs{$parent}));
2608 $found = test_this_config
($parent);
2609 if (defined($found)) {
2615 # Remove this config from the list of configs
2616 # do a make oldnoconfig and then read the resulting
2617 # .config to make sure it is missing the config that
2619 my %configs = %min_configs;
2620 delete $configs{$config};
2621 make_new_config
((values %configs), (values %keep_configs));
2624 assign_configs \
%configs, $output_config;
2626 return $config if (!defined($configs{$config}));
2628 doprint
"disabling config $config did not change .config\n";
2630 $nochange_config{$config} = 1;
2635 sub make_min_config
{
2638 if (!defined($output_minconfig)) {
2639 fail
"OUTPUT_MIN_CONFIG not defined" and return;
2642 # If output_minconfig exists, and the start_minconfig
2643 # came from min_config, than ask if we should use
2645 if (-f
$output_minconfig && !$start_minconfig_defined) {
2646 print "$output_minconfig exists\n";
2647 if (read_yn
" Use it as minconfig?") {
2648 $start_minconfig = $output_minconfig;
2652 if (!defined($start_minconfig)) {
2653 fail
"START_MIN_CONFIG or MIN_CONFIG not defined" and return;
2656 my $temp_config = "$tmpdir/temp_config";
2658 # First things first. We build an allnoconfig to find
2659 # out what the defaults are that we can't touch.
2660 # Some are selections, but we really can't handle selections.
2662 my $save_minconfig = $minconfig;
2665 run_command
"$make allnoconfig" or return 0;
2669 process_config_ignore
$output_config;
2671 undef %save_configs;
2674 if (defined($ignore_config)) {
2675 # make sure the file exists
2676 `touch $ignore_config`;
2677 assign_configs \
%save_configs, $ignore_config;
2680 %keep_configs = %save_configs;
2682 doprint
"Load initial configs from $start_minconfig\n";
2684 # Look at the current min configs, and save off all the
2685 # ones that were set via the allnoconfig
2686 assign_configs \
%min_configs, $start_minconfig;
2688 my @config_keys = keys %min_configs;
2690 # Remove anything that was set by the make allnoconfig
2691 # we shouldn't need them as they get set for us anyway.
2692 foreach my $config (@config_keys) {
2693 # Remove anything in the ignore_config
2694 if (defined($keep_configs{$config})) {
2695 my $file = $ignore_config;
2696 $file =~ s
,.*/(.*?
)$,$1,;
2697 doprint
"$config set by $file ... ignored\n";
2698 delete $min_configs{$config};
2701 # But make sure the settings are the same. If a min config
2702 # sets a selection, we do not want to get rid of it if
2703 # it is not the same as what we have. Just move it into
2705 if (defined($config_ignore{$config})) {
2706 if ($config_ignore{$config} ne $min_configs{$config}) {
2707 doprint
"$config is in allnoconfig as '$config_ignore{$config}'";
2708 doprint
" but it is '$min_configs{$config}' in minconfig .. keeping\n";
2709 $keep_configs{$config} = $min_configs{$config};
2711 doprint
"$config set by allnoconfig ... ignored\n";
2713 delete $min_configs{$config};
2725 # Now disable each config one by one and do a make oldconfig
2726 # till we find a config that changes our list.
2728 # Put configs that did not modify the config at the end.
2729 my @test_configs = keys %min_configs;
2731 for (my $i = 0; $i < $#test_configs; $i++) {
2732 if (!defined($nochange_config{$test_configs[0]})) {
2736 # This config didn't change the .config last time.
2737 # Place it at the end
2738 my $config = shift @test_configs;
2739 push @test_configs, $config;
2742 # if every test config has failed to modify the .config file
2743 # in the past, then reset and start over.
2745 undef %nochange_config;
2748 undef %processed_configs;
2750 foreach my $config (@test_configs) {
2752 $found = test_this_config
$config;
2754 last if (defined($found));
2756 # oh well, try another config
2759 if (!defined($found)) {
2760 # we could have failed due to the nochange_config hash
2761 # reset and try again
2763 undef %nochange_config;
2767 doprint
"No more configs found that we can disable\n";
2775 doprint
"Test with $config disabled\n";
2777 # set in_bisect to keep build and monitor from dieing
2782 start_monitor_and_boot
or $failed = 1;
2788 doprint
"$min_configs{$config} is needed to boot the box... keeping\n";
2789 # this config is needed, add it to the ignore list.
2790 $keep_configs{$config} = $min_configs{$config};
2791 $save_configs{$config} = $min_configs{$config};
2792 delete $min_configs{$config};
2794 # update new ignore configs
2795 if (defined($ignore_config)) {
2796 open (OUT
, ">$temp_config")
2797 or die "Can't write to $temp_config";
2798 foreach my $config (keys %save_configs) {
2799 print OUT
"$save_configs{$config}\n";
2802 run_command
"mv $temp_config $ignore_config" or
2803 dodie
"failed to copy update to $ignore_config";
2807 # We booted without this config, remove it from the minconfigs.
2808 doprint
"$config is not needed, disabling\n";
2810 delete $min_configs{$config};
2812 # Also disable anything that is not enabled in this config
2814 assign_configs \
%configs, $output_config;
2815 my @config_keys = keys %min_configs;
2816 foreach my $config (@config_keys) {
2817 if (!defined($configs{$config})) {
2818 doprint
"$config is not set, disabling\n";
2819 delete $min_configs{$config};
2823 # Save off all the current mandidory configs
2824 open (OUT
, ">$temp_config")
2825 or die "Can't write to $temp_config";
2826 foreach my $config (keys %keep_configs) {
2827 print OUT
"$keep_configs{$config}\n";
2829 foreach my $config (keys %min_configs) {
2830 print OUT
"$min_configs{$config}\n";
2834 run_command
"mv $temp_config $output_minconfig" or
2835 dodie
"failed to copy update to $output_minconfig";
2838 doprint
"Reboot and wait $sleep_time seconds\n";
2846 $#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl config-file\n";
2849 $ktest_config = $ARGV[0];
2850 if (! -f
$ktest_config) {
2851 print "$ktest_config does not exist.\n";
2852 if (!read_yn
"Create it?") {
2857 $ktest_config = "ktest.conf";
2860 if (! -f
$ktest_config) {
2861 open(OUT
, ">$ktest_config") or die "Can not create $ktest_config";
2863 # Generated by ktest.pl
2865 # Define each test with TEST_START
2866 # The config options below it will override the defaults
2874 read_config
$ktest_config;
2876 if (defined($opt{"LOG_FILE"})) {
2877 $opt{"LOG_FILE"} = eval_option
($opt{"LOG_FILE"}, -1);
2880 # Append any configs entered in manually to the config file.
2881 my @new_configs = keys %entered_configs;
2882 if ($#new_configs >= 0) {
2883 print "\nAppending entered in configs to $ktest_config\n";
2884 open(OUT
, ">>$ktest_config") or die "Can not append to $ktest_config";
2885 foreach my $config (@new_configs) {
2886 print OUT
"$config = $entered_configs{$config}\n";
2887 $opt{$config} = $entered_configs{$config};
2891 if ($opt{"CLEAR_LOG"} && defined($opt{"LOG_FILE"})) {
2892 unlink $opt{"LOG_FILE"};
2895 doprint
"\n\nSTARTING AUTOMATED TESTS\n\n";
2897 for (my $i = 0, my $repeat = 1; $i <= $opt{"NUM_TESTS"}; $i += $repeat) {
2900 doprint
"DEFAULT OPTIONS:\n";
2902 doprint
"\nTEST $i OPTIONS";
2903 if (defined($repeat_tests{$i})) {
2904 $repeat = $repeat_tests{$i};
2905 doprint
" ITERATE $repeat";
2910 foreach my $option (sort keys %opt) {
2912 if ($option =~ /\[(\d+)\]$/) {
2918 doprint
"$option = $opt{$option}\n";
2922 sub __set_test_option
{
2923 my ($name, $i) = @_;
2925 my $option = "$name\[$i\]";
2927 if (defined($opt{$option})) {
2928 return $opt{$option};
2931 foreach my $test (keys %repeat_tests) {
2933 $i < $test + $repeat_tests{$test}) {
2934 $option = "$name\[$test\]";
2935 if (defined($opt{$option})) {
2936 return $opt{$option};
2941 if (defined($opt{$name})) {
2948 sub set_test_option
{
2949 my ($name, $i) = @_;
2951 my $option = __set_test_option
($name, $i);
2952 return $option if (!defined($option));
2954 return eval_option
($option, $i);
2957 # First we need to do is the builds
2958 for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
2960 # Do not reboot on failing test options
2965 my $makecmd = set_test_option
("MAKE_CMD", $i);
2967 $machine = set_test_option
("MACHINE", $i);
2968 $ssh_user = set_test_option
("SSH_USER", $i);
2969 $tmpdir = set_test_option
("TMP_DIR", $i);
2970 $outputdir = set_test_option
("OUTPUT_DIR", $i);
2971 $builddir = set_test_option
("BUILD_DIR", $i);
2972 $test_type = set_test_option
("TEST_TYPE", $i);
2973 $build_type = set_test_option
("BUILD_TYPE", $i);
2974 $build_options = set_test_option
("BUILD_OPTIONS", $i);
2975 $pre_build = set_test_option
("PRE_BUILD", $i);
2976 $post_build = set_test_option
("POST_BUILD", $i);
2977 $pre_build_die = set_test_option
("PRE_BUILD_DIE", $i);
2978 $post_build_die = set_test_option
("POST_BUILD_DIE", $i);
2979 $power_cycle = set_test_option
("POWER_CYCLE", $i);
2980 $reboot = set_test_option
("REBOOT", $i);
2981 $noclean = set_test_option
("BUILD_NOCLEAN", $i);
2982 $minconfig = set_test_option
("MIN_CONFIG", $i);
2983 $output_minconfig = set_test_option
("OUTPUT_MIN_CONFIG", $i);
2984 $start_minconfig = set_test_option
("START_MIN_CONFIG", $i);
2985 $ignore_config = set_test_option
("IGNORE_CONFIG", $i);
2986 $run_test = set_test_option
("TEST", $i);
2987 $addconfig = set_test_option
("ADD_CONFIG", $i);
2988 $reboot_type = set_test_option
("REBOOT_TYPE", $i);
2989 $grub_menu = set_test_option
("GRUB_MENU", $i);
2990 $post_install = set_test_option
("POST_INSTALL", $i);
2991 $no_install = set_test_option
("NO_INSTALL", $i);
2992 $reboot_script = set_test_option
("REBOOT_SCRIPT", $i);
2993 $reboot_on_error = set_test_option
("REBOOT_ON_ERROR", $i);
2994 $poweroff_on_error = set_test_option
("POWEROFF_ON_ERROR", $i);
2995 $die_on_failure = set_test_option
("DIE_ON_FAILURE", $i);
2996 $power_off = set_test_option
("POWER_OFF", $i);
2997 $powercycle_after_reboot = set_test_option
("POWERCYCLE_AFTER_REBOOT", $i);
2998 $poweroff_after_halt = set_test_option
("POWEROFF_AFTER_HALT", $i);
2999 $sleep_time = set_test_option
("SLEEP_TIME", $i);
3000 $bisect_sleep_time = set_test_option
("BISECT_SLEEP_TIME", $i);
3001 $patchcheck_sleep_time = set_test_option
("PATCHCHECK_SLEEP_TIME", $i);
3002 $ignore_warnings = set_test_option
("IGNORE_WARNINGS", $i);
3003 $bisect_manual = set_test_option
("BISECT_MANUAL", $i);
3004 $bisect_skip = set_test_option
("BISECT_SKIP", $i);
3005 $config_bisect_good = set_test_option
("CONFIG_BISECT_GOOD", $i);
3006 $store_failures = set_test_option
("STORE_FAILURES", $i);
3007 $test_name = set_test_option
("TEST_NAME", $i);
3008 $timeout = set_test_option
("TIMEOUT", $i);
3009 $booted_timeout = set_test_option
("BOOTED_TIMEOUT", $i);
3010 $console = set_test_option
("CONSOLE", $i);
3011 $detect_triplefault = set_test_option
("DETECT_TRIPLE_FAULT", $i);
3012 $success_line = set_test_option
("SUCCESS_LINE", $i);
3013 $reboot_success_line = set_test_option
("REBOOT_SUCCESS_LINE", $i);
3014 $stop_after_success = set_test_option
("STOP_AFTER_SUCCESS", $i);
3015 $stop_after_failure = set_test_option
("STOP_AFTER_FAILURE", $i);
3016 $stop_test_after = set_test_option
("STOP_TEST_AFTER", $i);
3017 $build_target = set_test_option
("BUILD_TARGET", $i);
3018 $ssh_exec = set_test_option
("SSH_EXEC", $i);
3019 $scp_to_target = set_test_option
("SCP_TO_TARGET", $i);
3020 $target_image = set_test_option
("TARGET_IMAGE", $i);
3021 $localversion = set_test_option
("LOCALVERSION", $i);
3023 $start_minconfig_defined = 1;
3025 if (!defined($start_minconfig)) {
3026 $start_minconfig_defined = 0;
3027 $start_minconfig = $minconfig;
3030 chdir $builddir || die "can't change directory to $builddir";
3032 foreach my $dir ($tmpdir, $outputdir) {
3035 die "can't create $dir";
3039 $ENV{"SSH_USER"} = $ssh_user;
3040 $ENV{"MACHINE"} = $machine;
3042 $target = "$ssh_user\@$machine";
3044 $buildlog = "$tmpdir/buildlog-$machine";
3045 $dmesg = "$tmpdir/dmesg-$machine";
3046 $make = "$makecmd O=$outputdir";
3047 $output_config = "$outputdir/.config";
3049 if ($reboot_type eq "grub") {
3050 dodie
"GRUB_MENU not defined" if (!defined($grub_menu));
3051 } elsif (!defined($reboot_script)) {
3052 dodie
"REBOOT_SCRIPT not defined"
3055 my $run_type = $build_type;
3056 if ($test_type eq "patchcheck") {
3057 $run_type = $opt{"PATCHCHECK_TYPE[$i]"};
3058 } elsif ($test_type eq "bisect") {
3059 $run_type = $opt{"BISECT_TYPE[$i]"};
3060 } elsif ($test_type eq "config_bisect") {
3061 $run_type = $opt{"CONFIG_BISECT_TYPE[$i]"};
3064 if ($test_type eq "make_min_config") {
3068 # mistake in config file?
3069 if (!defined($run_type)) {
3070 $run_type = "ERROR";
3074 $installme = " no_install" if ($no_install);
3077 doprint
"RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type$installme\n\n";
3082 if (defined($addconfig)) {
3083 my $min = $minconfig;
3084 if (!defined($minconfig)) {
3087 run_command
"cat $addconfig $min > $tmpdir/add_config" or
3088 dodie
"Failed to create temp config";
3089 $minconfig = "$tmpdir/add_config";
3092 my $checkout = $opt{"CHECKOUT[$i]"};
3093 if (defined($checkout)) {
3094 run_command
"git checkout $checkout" or
3095 die "failed to checkout $checkout";
3101 if ($test_type eq "bisect") {
3104 } elsif ($test_type eq "config_bisect") {
3107 } elsif ($test_type eq "patchcheck") {
3110 } elsif ($test_type eq "make_min_config") {
3115 if ($build_type ne "nobuild") {
3116 build
$build_type or next;
3119 if ($test_type eq "install") {
3126 if ($test_type ne "build") {
3128 start_monitor_and_boot
or $failed = 1;
3130 if (!$failed && $test_type ne "boot" && defined($run_test)) {
3131 do_run_test
or $failed = 1;
3140 if ($opt{"POWEROFF_ON_SUCCESS"}) {
3142 } elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot
) {
3146 doprint
"\n $successes of $opt{NUM_TESTS} tests were successful\n\n";