timers, kselftest: Add 'adjtick' test to validate adjtimex() tick adjustments
[deliverable/linux.git] / tools / testing / selftests / timers / adjtick.c
1 /* adjtimex() tick adjustment test
2 * by: John Stultz <john.stultz@linaro.org>
3 * (C) Copyright Linaro Limited 2015
4 * Licensed under the GPLv2
5 *
6 * To build:
7 * $ gcc adjtick.c -o adjtick -lrt
8 *
9 * This program is free software: you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation, either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 */
19 #include <stdio.h>
20 #include <unistd.h>
21 #include <stdlib.h>
22 #include <sys/time.h>
23 #include <sys/timex.h>
24 #include <time.h>
25
26 #ifdef KTEST
27 #include "../kselftest.h"
28 #else
29 static inline int ksft_exit_pass(void)
30 {
31 exit(0);
32 }
33 static inline int ksft_exit_fail(void)
34 {
35 exit(1);
36 }
37 #endif
38
39 #define CLOCK_MONOTONIC_RAW 4
40
41 #define NSEC_PER_SEC 1000000000LL
42 #define USEC_PER_SEC 1000000
43
44 #define MILLION 1000000
45
46 long systick;
47
48 long long llabs(long long val)
49 {
50 if (val < 0)
51 val = -val;
52 return val;
53 }
54
55 unsigned long long ts_to_nsec(struct timespec ts)
56 {
57 return ts.tv_sec * NSEC_PER_SEC + ts.tv_nsec;
58 }
59
60 struct timespec nsec_to_ts(long long ns)
61 {
62 struct timespec ts;
63
64 ts.tv_sec = ns/NSEC_PER_SEC;
65 ts.tv_nsec = ns%NSEC_PER_SEC;
66
67 return ts;
68 }
69
70 long long diff_timespec(struct timespec start, struct timespec end)
71 {
72 long long start_ns, end_ns;
73
74 start_ns = ts_to_nsec(start);
75 end_ns = ts_to_nsec(end);
76
77 return end_ns - start_ns;
78 }
79
80 void get_monotonic_and_raw(struct timespec *mon, struct timespec *raw)
81 {
82 struct timespec start, mid, end;
83 long long diff = 0, tmp;
84 int i;
85
86 clock_gettime(CLOCK_MONOTONIC, mon);
87 clock_gettime(CLOCK_MONOTONIC_RAW, raw);
88
89 /* Try to get a more tightly bound pairing */
90 for (i = 0; i < 3; i++) {
91 long long newdiff;
92
93 clock_gettime(CLOCK_MONOTONIC, &start);
94 clock_gettime(CLOCK_MONOTONIC_RAW, &mid);
95 clock_gettime(CLOCK_MONOTONIC, &end);
96
97 newdiff = diff_timespec(start, end);
98 if (diff == 0 || newdiff < diff) {
99 diff = newdiff;
100 *raw = mid;
101 tmp = (ts_to_nsec(start) + ts_to_nsec(end))/2;
102 *mon = nsec_to_ts(tmp);
103 }
104 }
105 }
106
107 long long get_ppm_drift(void)
108 {
109 struct timespec mon_start, raw_start, mon_end, raw_end;
110 long long delta1, delta2, eppm;
111
112 get_monotonic_and_raw(&mon_start, &raw_start);
113
114 sleep(15);
115
116 get_monotonic_and_raw(&mon_end, &raw_end);
117
118 delta1 = diff_timespec(mon_start, mon_end);
119 delta2 = diff_timespec(raw_start, raw_end);
120
121 eppm = (delta1*MILLION)/delta2 - MILLION;
122
123 return eppm;
124 }
125
126 int check_tick_adj(long tickval)
127 {
128 long long eppm, ppm;
129 struct timex tx1;
130
131 tx1.modes = ADJ_TICK;
132 tx1.modes |= ADJ_OFFSET;
133 tx1.modes |= ADJ_FREQUENCY;
134 tx1.modes |= ADJ_STATUS;
135
136 tx1.status = STA_PLL;
137 tx1.offset = 0;
138 tx1.freq = 0;
139 tx1.tick = tickval;
140
141 adjtimex(&tx1);
142
143 sleep(1);
144
145 ppm = ((long long)tickval * MILLION)/systick - MILLION;
146 printf("Estimating tick (act: %ld usec, %lld ppm): ", tickval, ppm);
147
148 eppm = get_ppm_drift();
149 printf("%lld usec, %lld ppm", systick + (systick * eppm / MILLION), eppm);
150
151 tx1.modes = 0;
152 adjtimex(&tx1);
153
154 if (tx1.offset || tx1.freq || tx1.tick != tickval) {
155 printf(" [ERROR]\n");
156 printf("\tUnexpected adjtimex return values, make sure ntpd is not running.\n");
157 return -1;
158 }
159
160 /*
161 * Here we use 100ppm difference as an error bound.
162 * We likely should see better, but some coarse clocksources
163 * cannot match the HZ tick size accurately, so we have a
164 * internal correction factor that doesn't scale exactly
165 * with the adjustment, resulting in > 10ppm error during
166 * a 10% adjustment. 100ppm also gives us more breathing
167 * room for interruptions during the measurement.
168 */
169 if (llabs(eppm - ppm) > 100) {
170 printf(" [FAILED]\n");
171 return -1;
172 }
173 printf(" [OK]\n");
174
175 return 0;
176 }
177
178 int main(int argv, char **argc)
179 {
180 struct timespec raw;
181 long tick, max, interval, err;
182 struct timex tx1;
183
184 err = 0;
185 setbuf(stdout, NULL);
186
187 if (clock_gettime(CLOCK_MONOTONIC_RAW, &raw)) {
188 printf("ERR: NO CLOCK_MONOTONIC_RAW\n");
189 return -1;
190 }
191
192 printf("Each iteration takes about 15 seconds\n");
193
194 systick = sysconf(_SC_CLK_TCK);
195 systick = USEC_PER_SEC/sysconf(_SC_CLK_TCK);
196 max = systick/10; /* +/- 10% */
197 interval = max/4; /* in 4 steps each side */
198
199 for (tick = (systick - max); tick < (systick + max); tick += interval) {
200 if (check_tick_adj(tick)) {
201 err = 1;
202 break;
203 }
204 }
205
206 /* Reset things to zero */
207 tx1.modes = ADJ_TICK;
208 tx1.modes |= ADJ_OFFSET;
209 tx1.modes |= ADJ_FREQUENCY;
210
211 tx1.offset = 0;
212 tx1.freq = 0;
213 tx1.tick = systick;
214
215 adjtimex(&tx1);
216
217 if (err)
218 return ksft_exit_fail();
219
220 return ksft_exit_pass();
221 }
This page took 0.036069 seconds and 5 git commands to generate.