2011-05-03 Thiago Jung Bauermann * breakpoint.c (update_watchpoint): Move code to change the enable state of breakpoint from here ... (do_enable_breakpoint): ... to here. 2011-04-26 Andrew Gontarek * valprint.c (val_print_array_elements): Fixed poor performance of printing very large arrays with repeat_count_threshold set to unlimited. New comment. 2011-04-29 Tom Tromey * mi/mi-parse.c (mi_parse): Remove incorrect sizeof. (mi_parse): Likewise. * breakpoint.c (break_range_command): Use sizeof char*, not char**. (create_breakpoint): Likewise. (parse_breakpoint_sals): Likewise. 2011-04-29 Pedro Alves * linux-nat.c (linux_child_remove_fork_catchpoint) (linux_child_remove_vfork_catchpoint) (linux_child_remove_exec_catchpoint): New functions. (linux_target_install_ops): Install them. 2011-04-29 Phil Muldoon PR mi/12531 * varobj.c (install_default_visualizer): Do not install a visualizer if the varobj is CPLUS_FAKE_CHILD. (construct_visualizer): Likewise. 2011-04-28 Jan Kratochvil * symtab.c (expand_partial_symbol_name): New variable NCMP. Support case insensitive comparison. 2011-04-28 Ulrich Weigand * infrun.c (proceed): Revert previous change. (resume): Instead, handle the case of signal delivery while stepping off a breakpoint location here, and only if software single-stepping is used. Handle nested signals. 2011-04-28 Yao Qi * arm-tdep.c (copy_unmodified): Rename to ... (arm_copy_unmodified): .. this. New. (copy_preload): Move common part to ... (install_preload): .. this. New. (arm_copy_preload): New. (copy_preload_reg): Move common part to ... (install_preload_reg): ... this. New. (arm_copy_preload_reg): New. (copy_b_bl_blx): Move common part to ... (install_b_bl_blx): .. this. New. (arm_copy_b_bl_blx): New. (copy_bx_blx_reg): Move common part to ... (install_bx_blx_reg): ... this. New. (arm_copy_bx_blx_reg): New. (copy_alu_reg): Move common part to ... (install_alu_reg): ... this. New. (arm_copy_alu_reg): New. (copy_alu_shifted_reg): Move common part to ... (install_alu_shifted_reg): ... this. New. (copy_ldr_str_ldrb_strb): Move common part to ... (install_ldr_str_ldrb_strb): ... this. New. (arm_copy_ldr_str_ldrb_strb): New. (copy_copro_load_store): Move some common part to ... (install_copy_copro_load_store): ... this. New. (arm_copy_copro_load_store): New. (copy_svc): Delete. (arm_copy_svc): Renamed from copy_svc. (copy_undef): Delete. (arm_copy_undef): Renamed from copy_undef. (decode_ext_reg_ld_st): Delete. (arm_decode_ext_reg_ld_st): Renamed from decode_ext_reg_ld_st. (decode_svc_copro): Delete. (arm_decode_svc_copro): Renamed from decode_svc_copro. (copy_copro_load_store, copy_alu_imm): update callers. (copy_extra_ld_st, copy_block_xfer): Likewise. (decode_misc_memhint_neon, decode_unconditional): Likewise. (decode_miscellaneous, decode_dp_misc): Likewise. (decode_ld_st_word_ubyte, decode_media): Likewise. (decode_b_bl_ldmstm, decode_ext_reg_ld_st): Likewise. (decode_svc_copro, decode_misc_memhint_neon): Likewise. (decode_unconditional, decode_miscellaneous): Likewise. (decode_media, decode_b_bl_ldmstm): Likewise. (arm_process_displaced_insn): Likewise.. (decode_misc_memhint_neon): Delete. (arm_decode_misc_memhint_neon): Renamed from decode_misc_memhint_neon. (decode_miscellaneous): Delete. (arm_decode_miscellaneous): Renamed from decode_miscellaneous. (decode_dp_misc): Delete. (arm_decode_dp_misc): Renamed from decode_dp_misc. (decode_ld_st_word_ubyte): Delete. (arm_decode_ld_st_word_ubyte): Renamed from decode_ld_st_word_ubyte. (decode_media): Delete. (arm_decode_media): Renamed from decode_media. (decode_b_bl_ldmstm): Delete. (arm_decode_b_bl_ldmstm): Renamed from decode_b_bl_ldmstm. (decode_ext_reg_ld_st): Delete. (arm_decode_ext_reg_ld_st): Renamed from decode_ext_reg_ld_st. (decode_unconditional): Delete. (arm_decode_unconditional): Renamed from decode_unconditional. 2011-04-27 Jan Kratochvil Case insensitive lookups implementation. * dwarf2read.c: Include ctype.h. (struct mapped_index): New field version. (mapped_index_string_hash): New parameter index_version. New comment for it. Call tolower appropriately. (find_slot_in_mapped_hash): New variable cmp, initialize it, use it. Choose the right index version for mapped_index_string_hash. (dwarf2_read_index): Support also the index version 5. Initialize the new struct mapped_index field version. (hash_strtab_entry): Pass INT_MAX for the new parameter, explain why. (find_slot): Explain the version needs. Pass INT_MAX for the new parameter. (write_psymtabs_to_index): Produce version 5. * minsyms.c (lookup_minimal_symbol): New variable cmp, initialize it, use it. New comment for SYMBOL_MATCHES_SEARCH_NAME. * psymtab.c (lookup_partial_symbol): Find the SYMBOL_MATCHES_SEARCH_NAME start of the found block of matching entries. * symtab.c (lookup_symbol_in_language): Remove the case_sensitive_off NAME lowercasing. (search_symbols): Pass REG_ICASE to regcomp for case_sensitive_off. (completion_list_add_name): New variable ncmp, initialize it, use it. * symtab.h (SYMBOL_HASH_NEXT): Always call tolower. * utils.c (strcmp_iw): Support case_sensitive_off. (strcmp_iw_ordered): Sort in a way compatible with case_sensitive_off. New function comment part. New variables saved_string1, saved_string2 and case_pass. Add a proper second pass. 2011-04-27 Jan Kratochvil Replace re_comp/re_exec by regcomp/regexec. * symtab.c (struct search_symbols_data): New fields preg, preg_p. (search_symbols_name_matches): Use them, use regexec. (search_symbols): New variable retval_chain, adjust the use of old_chain against it. Replace re_comp by regcomp. Use the new struct search_symbols_data fields, use regexec instead of re_exec. 2011-04-27 Jan Kratochvil Format the code for the next patch. * dwarf2read.c (struct mapped_index): Include delimiting newlines. * utils.c (strcmp_iw_ordered): Reformat the code for the next patch. New variables c1 and c2. 2011-04-27 Ulrich Weigand * infrun.c (proceed): Do not single-step into signal delivery when stepping off a breakpoint location. (insert_step_resume_breakpoint_at_frame): Move prototype earlier. (insert_step_resume_breakpoint_at_caller): Likewise. (insert_step_resume_breakpoint_at_sal): Likewise. (insert_longjmp_resume_breakpoint): Likewise. 2011-04-27 Yao Qi * common/linux-ptrace.h: Remove include . 2011-04-27 Joel Brobecker * procfs.c (procfs_pass_signals): Fix advance declaration. 2011-04-27 Ulrich Weigand * target.h (struct target_ops): Remove to_notice_signals; add to_pass_signals. (target_notice_signals): Remove. (target_pass_signals): Add prototype. * target.c (update_current_target): Remove to_notice_signals; mention to_pass_signals. (target_pass_signals): New function. (debug_to_notice_signals): Remove. (setup_target_debug): Do not install debug_to_notice_signals. * infrun.c (signal_pass): New global. (resume): Call target_pass_signals. (handle_inferior_event): Report all signals while stepping over non-steppable watchpoint. Reset trap_expected to ensure breakpoints are re-inserted when stepping over a signal handler. (signal_cache_update): New function. (signal_stop_update): Call it. (signal_print_update): Likewise. (signal_pass_update): Likewise. (handle_command): Call signal_cache_update and target_pass_signals instead of target_notice_signals. (_initialize_infrun): Initialize signal_pass. * linux-nat.c (pass_mask): New global. (linux_nat_pass_signals): New function. (linux_nat_create_inferior): Report all signals initially. (linux_nat_attach): Likewise. (linux_nat_resume): Use pass_mask to decide whether to directly handle an inferior signal. (linux_nat_wait_1): Likewise. (linux_nat_add_target): Install to_pass_signals callback. * nto-procfs.c (notice_signals): Remove. (procfs_resume): Do not call notice_signals. (procfs_notice_signals): Remove. (procfs_pass_signals): New function. (init_procfs_ops): Install to_pass_signals callback instead of to_notice_signals callback. (_initialize_procfs): Report all signals initially. * procfs.c (procfs_notice_signals): Remove. (procfs_pass_signals): New function. (procfs_target): Install to_pass_signals callback instead of to_notice_signals callback. (register_gdb_signals): Remove. (procfs_debug_inferior): Report all signals initially. (procfs_init_inferior): Remove redundant register_gdb_signals call. * remote.c (remote_pass_signals): Add numsigs and pass_signals parameters; use them instead of calling signal_..._state routines. (remote_notice_signals): Remove. (remote_start_remote): Report all signals initially. (remote_resume): Do not call remote_pass_signals. (_initialize_remote): Install to_pass_signals callback instead of to_notice_signals callback. 2011-04-27 Pedro Alves * breakpoint.c (user_settable_breakpoint): Delete. (user_breakpoint_p): Remove check on user_settable_breakpoint. (delete_command): Check user_breakpoint_p instead of looking at the breakpoint's type. (disable_command): Ditto. (enable_command): Ditto. (delete_trace_command): Use user_breakpoint_p instead of looking at the breakpoint number directly. When checking if there are user visible tracepoints, in order to know whether to ask the user for confirmation, check whether the breakpoint is actually a tracepoint. 2011-04-27 Vladimir Prus * python/py-breakpoint.c (gdbpy_breakpoint_created): Fix compilation. 2011-04-27 Vladimir Prus MI breakpoint notifications. * annotate.c (breakpoint_changed): Adjust parameter type. * breakpoint.c (set_breakpoint_condition): Adjust to change in breakpoint_modified type. (breakpoint_set_commands): Likewise. (do_map_commands_command): Likewise. (bpstat_check_breakpoint_conditions): Notify that breakpoint has changed after bumping hit count. (bpstat_stop_status): Likewise. (print_one_breakpoint_location): Don't wrap in tuple here. (print_one_breakpoint): Always print individual locations. For locations, use unnamed tuple. (disable_breakpoints_in_unloaded_shlib): Notify that breakpoint has changed. (create_catchpoint, create_syscall_event_catchpoint): Call breakpoint_created obsever. (mention): Don't call breakpoint_created observer. (create_breakpoint_sal): Call breakpoint_created observer. (create_breakpoint, watch_command_1): Likewise. (create_ada_exception_breakpoint): Likewise. (delete_breakpoint): Call breakpoint_deleted breakpoint. (locations_are_equal): New. (update_breakpoint_locations): If locations were changed, notify. (set_ignore_count, disable_breakpoint, do_enable_breakpoint): Call breakpoint_modified observer. * mi/mi-cmd-break.c (breakpoint_notify): Adjust. (mi_cmd_break_insert): Don't set observers for modify and delete. * mi/mi-interp.c (mi_suppress_breakpoint_notifications): New. (mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified): New. (mi_interpreter_init): Hook the above. * mi/mi-main.c (mi_cmd_execute): Disable breakpoint notifications while -break-* commands are executing. * mi/mi-main.h (mi_suppress_breakpoint_notifications): New. * mi/mi-out.c (struct ui_out_data): New field original_buffer. (mi_redirect): New. (mi_ui_out_impl): Hook in mi_redirect. (mi_field_skip): True to the name, skip the field, don't output a field with an empty value. * python/py-breakpoint.c (gdbpy_breakpoint_created) (gdbpy_breakpoint_deleted): Adjust. * tui/tui-hooks.c (tui_event_create_breakpoint) (tui_event_delete_breakpoint, tui_event_modify_breakpoint): Adjust. 2011-04-26 Aleksandar Ristovski * nto-procfs.c (procfs_insert_hw_watchpoint): Fix prototype. (procfs_remove_hw_watchpoint): Likewise. 2011-04-26 Michael Walle * remote.c (remote_start_remote): Ack packet after sending the interrupt sequence. 2011-04-26 Yao Qi * linux-nat.c: Move common macros to ... Include linux-ptrace.h. * common/linux-ptrace.h: ... here. New. 2011-04-25 Jan Kratochvil * elfread.c (elf_symfile_read): Protect dwarf2_initialize_objfile by !objfile_has_partial_symbols. New comment. * objfiles.c (objfile_has_partial_symbols): Call HAS_SYMBOLS if SYM_READ_PSYMBOLS is not present. Extend the comment. * symfile.h (struct sym_fns): Extend the sym_read_psymbols comment. 2011-04-25 Jan Kratochvil * defs.h (ENUM_BITFIELD): Remove. 2011-04-24 Jan Kratochvil Eli Zaretskii * NEWS: Document the new gdbserver --once option. 2011-04-21 Jie Zhang * MAINTAINERS: Update my email address. 2011-04-21 Pierre Muller * gdb_wchar.h (USE_INTERMEDIATE_ENCODING_FUNCTION): New macro. (INTERMEDIATE_ENCODING): Change value to intermediate_encoding function call if __STDC_ISO_10646__ macro is defined. (intermediate_encoding): New prototype. * charset.c (your_gdb_wchar_t_is_bogus): New extern test variable to generate compile time error for unsupported gdb_wchar_t size. (ENDIAN_SUFFIX): New macro. (intermediate_encoding): New function. 2011-04-20 Jan Kratochvil * ada-lang.c (struct add_partial_datum): Update the comment for expand_partial_symbol_name. (ada_add_partial_symbol_completions): Rename to ... (ada_expand_partial_symbol_name): ... here, change return type, update function comment, call symbol_completion_match instead of symbol_completion_add. (ada_make_symbol_completion_list): Use now expand_partial_symbol_names and ada_expand_partial_symbol_name. * dwarf2read.c (dw2_expand_symtabs_matching): Support NULL FILE_MATCHER. (dw2_map_symbol_names): Remove. (dwarf2_gdb_index_functions): Unlist dw2_map_symbol_names. * psymtab.c (map_symbol_names_psymtab): Remove. (expand_symtabs_matching_via_partial): Support NULL FILE_MATCHER. Support KIND == ALL_DOMAIN. Exchange the NAME_MATCHER and KIND check order. (psym_functions): Unlist map_symbol_names_psymtab. (map_partial_symbol_names): Rename to ... (expand_partial_symbol_names): ... here, change the FUN type, call expand_symtabs_matching with ALL_DOMAIN and NULL FILE_MATCHER now. * psymtab.h (map_partial_symbol_names): Rename to ... (expand_partial_symbol_names): ... here, change the FUN type. * symfile.h (struct quick_symbol_functions): Update the description of expand_symtabs_matching. Remove map_symbol_names. * symtab.c (search_symbols): Add ALL_DOMAIN to the function comment. (struct add_name_data): Update the comment for expand_partial_symbol_name. (add_partial_symbol_name): Rename to ... (expand_partial_symbol_name): ... here. Replace completion_list_add_name call by strncmp. (default_make_symbol_completion_list_break_on): Use now expand_partial_symbol_names and expand_partial_symbol_name. * symtab.h (enum search_domain): New element ALL_DOMAIN. 2011-04-20 Tom Tromey * dwarf2read.c (save_gdb_index_command): Replace format documentation with a pointer to the manual. 2011-04-20 Pedro Alves * regcache.c: Include remote.h. (enum regcache_dump_what) : New enum value. (regcache_dump): Handle regcache_dump_remote. (maintenance_print_remote_registers): New function. (_initialize_regcache): Install "maint print remote-registers" command. * remote.c (map_regcache_remote_table): New function, factored out from ... (init_remote_state): ... here. (remote_register_number_and_offset): New. * remote.h (remote_register_number_and_offset): Declare. 2011-04-20 Pedro Alves * regcache.c (get_thread_arch_regcache): If creating a regcache for null_ptid, assume and allow a NULL address space, instead of asking the target for the ptid's address space. * infrun.c (ptid_is_pid): Remove assertion. 2011-04-19 Tom Tromey * windows-tdep.c (windows_xfer_shared_library): * windows-nat.c (get_module_name, windows_make_so): * v850-tdep.c (v850_handle_pushm): * utils.c (null_cleanup, gdb_realpath): * ui-out.c (get_next_header): * tracepoint.c (clear_traceframe_info): * symtab.c (lookup_symtab): * serial.h (struct serial_ops): * mipsread.c (read_alphacoff_dynamic_symtab): * infcmd.c (print_return_value): * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): * f-exp.y (parse_number): * exceptions.c (catch_exceptions): * dummy-frame.c (dummy_frame_this_id): * defs.h (struct cleanup): * breakpoint.c (disable_breakpoints_in_unloaded_shlib): * arm-tdep.c (arm_push_dummy_call): * amd64-tdep.h (amd64_collect_xsave): * amd64-tdep.c (amd64_collect_xsave): * alpha-tdep.c (alpha_heuristic_frame_unwind_cache): * README (typing): Remove duplicate words. * cli/cli-decode.c (lookup_cmd_composition): Add comma. * infrun.c (siginfo_value_read): Fix typo. * solib-frv.c (frv_fdpic_find_global_pointer): Likewise. * top.c (source_line_number): Add comma. 2011-04-19 Marc Khouzam * thread.c (any_live_thread_of_process): Prioritize threads that are not executing. * gdbthread.h (any_live_thread_of_process): Update comment as per above change. 2011-04-19 Andreas Schwab * xcoffread.c (process_xcoff_symbol): Remove useless cast. (scan_xcoff_symtab): Likewise. 2011-04-19 Pierre Muller * xcoffread.c (process_xcoff_symbol): ARI fix: Avoid assignment inside if clause. 2011-04-19 Pierre Muller Pedro Alves * xstormy16-tdep.c (xstormy16_push_dummy_call): Add local variables to simplify code and avoid == operator at end of line as this is against GNU coding standards. 2011-04-19 Pierre Muller * solib-svr4.c (svr4_keep_data_in_core): Rename local variable lm_name to name_lm to avoid conflict with lm_name function. 2011-04-19 Pierre Muller ARI fixes: Use only lowercase function name for static functions. * nto-tdep.c (LM_ADDR): Rename to... (lm_addr): New function name. (nto_relocate_section_addresses): Adapt to change above. * solib-sunos.c (LM_ADDR): Rename to... (lm_addr): New function name. (LM_NEXT): Rename to... (lm_next): New function name. (sunos_current_sos, sunos_relocate_section_addresses): Adapt to function name changes above. * solib-svr4.c (LM_ADDR_FROM_LINK_MAP): Rename to... (lm_addr_from_link_map): New function name. (HAS_LM_DYNAMIC_FROM_LINK_MAP): Rename to... (has_lm_dynamic_from_link_map): New function name. (LM_DYNAMIC_FROM_LINK_MAP): Rename to... (lm_dynamic_from_link_map): New function name. (LM_ADDR_CHECK): Rename to... (lm_addr_check): New function name. (LM_NEXT): Rename to... (lm_next): New function name. (LM_PREV): Rename to... (lm_prev): New function name. (LM_NAME): Rename to... (lm_name): New function name. (IGNORE_FIRST_LINK_MAP_ENTRY): Rename to... (ignore_first_link_map_entry): New function name. (svr4_keep_data_in_core): Adapt to function name changes above. (svr4_current_sos): Likewise. (enable_break): Likewise. (svr4_relocate_section_addresses): Likewise. 2011-04-19 Pierre Muller ARI cleanup. * xtensa-tdep.c (xtensa_register_type): Use xstrprintf instead of sprintf. Simplify code and avoid loosing memory. (xtensa_register_reggroup_p): Extract assignment out of IF clause. (call0_frame_cache): Remove && operator from end of line. 2011-04-17 Jan Kratochvil Fix libraries displacement if they change whether they were prelinked. * solib-svr4.c (LM_ADDR_CHECK): Set L_ADDR even if the DYNAMIC pointer does not match. Comment why. 2011-04-17 Jan Kratochvil * corelow.c: Include wrapper.h. (core_open): Call now gdb_target_find_new_threads. * wrapper.c: Include target.h. (gdb_target_find_new_threads): New. * wrapper.h (gdb_target_find_new_threads): New declaration. 2011-04-17 Jan Kratochvil * linux-thread-db.c (find_new_threads_callback): Exit on zero TI_TID even if !TARGET_HAS_EXECUTION. 2011-04-17 Jan Kratochvil Fix convert_code_addr_to_desc_addr for ppc64 files after eu-strip. * elfread.c (elf_symfile_read): New variable synth_abfd, pass it to bfd_get_synthetic_symtab. * jit.c (jit_register_code): Pass NULL to the new parameter parent. * machoread.c (macho_add_oso_symfile): Pass main_objfile to the new parameter parent, remove the call to add_separate_debug_objfile. * solib.c (solib_read_symbols): Pass NULL to the new parameter parent. * symfile-mem.c (symbol_file_add_from_memory): Likewise. * symfile.c (symbol_file_add_with_addrs_or_offsets): New parameter parent, new comment for it, call add_separate_debug_objfile for it. (symbol_file_add_separate): Pass objfile as the parameter parent, remove the call to add_separate_debug_objfile. (symbol_file_add_from_bfd): New parameter parent, pass it. (symbol_file_add): Pass NULL to the new parameter parent. * symfile.h (symbol_file_add_from_bfd): New parameter parent. 2011-04-17 Jan Kratochvil * elfread.c (elf_symtab_read): Do not ignore .L symbols if they are BSF_SYNTHETIC. 2011-04-17 Jan Kratochvil Fix Python access to inlined frames. * python/py-frame.c (frapy_read_var): Find BLOCK using get_frame_block. * python/py-symbol.c (gdbpy_lookup_symbol): Likewise. 2011-04-15 Tom Tromey * dwarf2read.c (add_index_entry): Use VEC_last, not VEC_length. 2011-04-15 Gary Benson * MAINTAINERS: Add myself to write-after-approval section. 2011-04-14 Mike Frysinger * remote-sim.c (sim_command_completer): New function. (_initialize_remote_sim): Set completer to sim_command_completer. 2011-04-13 Thiago Jung Bauermann * breakpoint.c (print_exception_catchpoint): Rename to ... (print_it_exception_catchpoint): ... this. (gnu_v3_exception_catchpoint_ops): Update with new name for print_it_exception_catchpoint. 2011-04-13 Edjunior Machado * MAINTAINERS: Add myself for write after approval privileges. 2011-04-13 Marek Polacek * MAINTAINERS: Add myself as a write-after-approval maintainer. 2011-04-13 Thiago Jung Bauermann * breakpoint.c (watch_command_1): Remove colon from exp_string. 2011-04-13 Thiago Jung Bauermann * breakpoint.c (save_breakpoints): Verify whether breakpoint_ops.print_recreate is defined before calling it. 2011-04-11 Gary Benson Fix failure with --enable-maintainer-mode. * Makefile.in (aclocal_m4_deps): Updated gnulib dependencies. 2011-04-09 Jan Kratochvil Code cleanup. * symtab.c (search_symbols): Reorder the KIND description in the function comment. Remove the unused 4th element of types, types2, types3 and types4. New gdb_assert on KIND. (symtab_symbol_info): Remove the unused 4th element of classnames. New gdb_assert on KIND. * symtab.h (enum search_domain): New warning in the enum comment. Assign numbers to the elements VARIABLES_DOMAIN, FUNCTIONS_DOMAIN and TYPES_DOMAIN. 2011-04-09 Jan Kratochvil Fix crash of gdb save-index on a STABS file. * dwarf2read.c (write_psymtabs_to_index): Return also on no PSYMTABS_ADDRMAP. 2011-04-09 Jan Kratochvil Fix DW_AT_accessibility compatibility with gcc-4.6+. * dwarf2read.c: Include ctype.h. (producer_is_gxx_lt_4_6, dwarf2_default_access_attribute): New functions. (dwarf2_add_field): Fix new_field->accessibility by calling dwarf2_default_access_attribute. Restructure setting accessibility vs. virtuality. (dwarf2_add_member_fn): New variable accessibility. Fix fnp is_private and is_protected by calling dwarf2_default_access_attribute. 2011-04-08 Kevin Buettner * rx-tdep.c (rx_frame_unwind): Add default_frame_unwind_stop_reason to the initialization. 2011-04-08 Steve Ellcey * Add default_frame_unwind_stop_reason value to libunwind_frame_unwind initalization. 2011-04-07 Pierre Muller Remove support for old Cygwin 1.5 versions. * remote-fileio.c: Remove macros used to emulate new cygwin_conv_path function on old Cygwin version. * windows-nat.c: Remove cygwin version check and always define __USEWIDE for Cygwin compilation. 2011-04-07 Yao Qi * arm-linux-tdep.c (arm_linux_copy_svc): Remove parameters INSN and TO. * arm-tdep.c (cleanup_svc): Handle variable instruction size. (arm_copy_svc): Remove parameters INSN and TO. (decode_svc_copro): Update caller. * arm-tdep.h (struct displaced_step_closure): Remove parameters from function pointer `copy_svc_os'. 2011-04-07 Yao Qi * arm-tdep.c (cleanup_branch): Set a correct return address in LR for ARM and Thumb. 2011-04-06 Jan Kratochvil Code cleanup. * dictionary.c (dict_hash): Use SYMBOL_HASH_NEXT. * dwarf2read.c (mapped_index_string_hash): Refer to SYMBOL_HASH_NEXT in the function comment, a new note on values compatibility. * minsyms.c (msymbol_hash_iw, msymbol_hash): Use SYMBOL_HASH_NEXT. * symtab.h (SYMBOL_HASH_NEXT): New. 2011-04-06 Thiago Jung Bauermann * ppc-linux-nat.c (check_condition): Add len output parameter. Set it based on the memory region referenced in the condition expression. Update all callers. 2011-04-06 Jan Kratochvil Fix crash regression on systems featuring .gdb_index. * objfiles.c (free_objfile): Move the forget_cached_source_info_for_objfile call earlier. Comment it. Extend the comment for objfile_free_data. 2011-04-06 Jan Kratochvil Fix regression of displaying the debug format. * buildsym.c (end_symtab): Set symtab's debugformat and producer from subfile. 2011-04-04 Tom Tromey * cli/cli-interp.c (struct captured_execute_command_args): Remove. (do_captured_execute_command): Remove. (safe_execute_command): Use TRY_CATCH. * cli/cli-script.c (struct wrapped_read_command_file_args): Remove. (wrapped_read_command_file): Remove. (script_from_file): Use TRY_CATCH. * exceptions.c (catch_exception): Remove. * exceptions.h (catch_exception): Remove. (deprecated_throw_reason): Update comment. * mi/mi-main.c (captured_mi_execute_command): Change 'data' argument to 'context'. (mi_execute_command): Use TRY_CATCH. * remote.c (struct start_remote_args): Remove. (remote_start_remote): Update; change arguments. (remote_open_1): Use TRY_CATCH. 2011-04-04 Tom Tromey * tracepoint.c (scope_info): Update. * symtab.c (decode_line_spec): Update. * python/python.c (gdbpy_decode_line): Update. * linespec.h (decode_line_1): Update. * linespec.c (decode_line_1): Remove 'not_found_ptr' argument. (decode_compound, find_method, symtab_from_filename) (decode_variable): Likewise. * cli/cli-cmds.c (edit_command): Update. (list_command): Update. * breakpoint.c (parse_breakpoint_sals): Remove 'not_found_ptr' argument. (create_breakpoint): Update. (until_break_command): Update. (addr_string_to_sals): Update. (decode_line_spec_1): Update. 2011-04-04 Tom Tromey * breakpoint.c (struct captured_parse_breakpoint_args): Remove. (do_captured_parse_breakpoint): Remove. (create_breakpoint): `e' is now volatile. Remove `parse_args'. Use TRY_CATCH directly. 2011-04-04 Tom Tromey * symtab.h (free_symtab): Remove. (forget_cached_source_info_for_objfile): Declare. * symmisc.c (free_symtab): Remove. * source.c (forget_cached_source_info_for_objfile): New function. (forget_cached_source_info): Use it. * objfiles.c (free_objfile): Simplify check before calling clear_current_source_symtab_and_line. Call forget_cached_source_info_for_objfile. 2011-04-04 Tom Tromey * mdebugread.c (psymtab_to_symtab_1): Copy linetable to obstack. (new_symtab): Don't set `free_code' on symtab. (new_linetable): Properly handle size==0. * symtab.h (struct symtab) : Remove. * symmisc.c (free_symtab): Don't free the linetable. Don't call free_func. * jv-lang.c (struct jv_per_objfile_data): New. (jv_per_objfile_free): Free the data. (get_dynamics_objfile): Allocate a jv_per_objfile_data. (get_java_class_symtab): Set the `dict' field on the jv_per_objfile_data. (free_class_block): Remove. * buildsym.c (end_symtab): Don't set `free_code' or `free_func' on the symtab. 2011-04-04 Tom Tromey * symfile.c (reread_symbols): Update. * objfiles.h (struct objfile) : Remove field. * objfiles.c (allocate_objfile): Update. * cp-support.h (cp_check_possible_namespace_symbols): Don't declare. * cp-namespace.c (lookup_symbol_file): Don't call lookup_possible_namespace_symbol. (initialize_namespace_symtab, get_possible_namespace_block) (free_namespace_block, cp_check_possible_namespace_symbols) (check_possible_namespace_symbols_loop) (check_one_possible_namespace_symbol) (lookup_possible_namespace_symbol): Remove. (maintenance_cplus_namespace): Replace with notice. (_initialize_cp_namespace): Deprecate `maint cplus namespace'. 2011-04-04 Tom Tromey * xcoffread.c (read_xcoff_symtab): Make `debugfmt' const. * symtab.h (struct symtab) : Now const. * symmisc.c (free_symtab): Don't free debugformat. * buildsym.h (struct subfile) : Now const. (record_debugformat, record_producer): Document. * buildsym.c (end_symtab): Don't save debugformat and producer names on obstack. (end_symtab): Don't free debugformat and producer fields. (record_debugformat): Don't call xstrdup. (record_producer): Likewise. 2011-04-04 Tom Tromey * source.c (find_source_lines): Remove LSEEK_NOT_LINEAR code. (source_line_charpos, source_charpos_line): Remove. 2011-04-04 Tom Tromey * symtab.h (domain_enum): Split in two... (enum search_domain): New. (search_symbols): Update. * symtab.c (print_symbol_info, symtab_symbol_info): Remove redundant declarations. (search_symbols): Change 'kind' argument to search_domain. Update. (print_symbol_info): Likewise. (symtab_symbol_info): Likewise. * symfile.h (struct quick_symbol_functions) : Change type of 'kind' argument. : Likewise. * psymtab.c (pre_expand_symtabs_matching_psymtabs): Update. (expand_symtabs_matching_via_partial): Update. * dwarf2read.c (dw2_pre_expand_symtabs_matching): Update. (dw2_expand_symtabs_for_function): Update. * block.h: Moved anonymous enum... * defs.h (enum block_enum): ... here. Now named. 2011-04-03 Joel Brobecker GDB 7.3 branch created (branch timestamp: 2011-04-01 01:00 UTC) * version.in: Bump version to 7.3.50.20110403-cvs. 2011-04-03 Joel Brobecker * NEWS: Create a new section for the next release branch. Rename the section of the current branch, now that it has been cut. 2011-04-01 Ulrich Weigand * arm-tdep.c (arm_gdbarch_init): Enfore correct register number for "fpscr" in target description. 2011-04-01 Jan Kratochvil * dwarf2read.c (find_slot_in_mapped_hash): New variable back_to, initialize it. Delay HASH initialization. Strip the part after open parenthesis for languages with qualifiers. Call do_cleanups. 2011-04-01 Tom Tromey * utils.c (report_command_stats): Don't print `-' for negative number. 2011-04-01 Eric Botcazou * ada-lang.c (ada_is_simple_array_type, ada_value_slice_from_ptr) (ada_value_slice, empty_array, to_fixed_array_type): Deal with typedefs. 2011-04-01 Joel Brobecker * breakpoint.h (bpdisp_text): Add declaration. * breakpoint.c (bpdisp_text): Make non-static. * ada-lang.c: #include "mi/mi-common.h". (print_it_exception): Rewrite to improve GDB/MI output. 2011-04-01 Pedro Alves * arm-tdep.h (struct address_space): Add forward declaration. 2011-04-01 Ulrich Weigand * arm-tdep.h (arm_insert_single_step_breakpoint): Add prototype. * arm-tdep.c (arm_override_mode): New global. (arm_pc_is_thumb): Respect arm_override_mode. Remove single-step execution mode heuristics. (thumb_get_next_pc_raw): Remove INSERT_BKTP argument; always insert second single-step breakpoint if needed, using arm_insert_single_step_breakpoint. (arm_get_next_pc_raw): Remove INSERT_BKTP argument. Only handle ARM execution mode, do not call thumb_get_next_pc_raw. (arm_get_next_pc): Encode execution mode in return value. Call either arm_get_next_pc_raw or thumb_get_next_pc_raw. (arm_insert_single_step_breakpoint): New function. (arm_software_single_step): Call it. * arm-linux-tdep.c (arm_linux_sigreturn_return_addr): Add IS_THUMB argument to return execution mode of sigreturn target. (arm_linux_syscall_next_pc): Use it. (arm_linux_copy_svc): Update call. (arm_linux_software_single_step): Call arm_insert_single_step_breakpoint. 2011-03-31 Jan Kratochvil * dwarf2read.c (dwarf2_read_index): Fix .gdb_index version number in the comment. 2011-03-31 Tom Tromey * varobj.c (update_dynamic_varobj_children): Properly handle errors from iterator. 2011-03-31 Jan Kratochvil * dwarf2read.c (dwarf2_name): Initialize DEMANGLED. Avoid demangling struct linkage name twice. 2011-03-31 Tom Tromey * python/py-prettyprint.c (print_stack_unless_memory_error): Add missing ">" to message. 2011-03-31 Tom Tromey * varobj.c (instantiate_pretty_printer): Remove duplicate 'return'. 2011-03-31 Ulrich Weigand * i386-tdep.c (i386_frame_prev_register): Unwind SP from memory if neither saved value nor register available (e.g. signal frame). 2011-03-31 Thiago Jung Bauermann * macroexp.c (expand): Avoid uninitialized variable compiler warning. 2011-03-31 Thiago Jung Bauermann * breakpoint.c (break_range_command): Fix typo in comment. 2011-03-31 Thiago Jung Bauermann Sergio Durigan Junior Implement support for PowerPC BookE ranged breakpoints. * NEWS: Mention support for ranged breakpoints on embedded PowerPC. * breakpoint.h (struct bp_target_info) : New member variable. (struct breakpoint_ops) : Take struct bp_location instead of struct breakpoint as argument, and also add ASPACE and BP_ADDR arguments. Update all callers. (struct breakpoint_ops) : New method. (struct breakpoint) : New member variable. * breakpoint.c (breakpoint_location_address_match): Add function prototype. (insert_bp_location): Set bl->target_info.length. (breakpoint_here_p): Call breakpoint_location_address_match. (moribund_breakpoint_here_p): Likewise. (regular_breakpoint_inserted_here_p): Likewise. (breakpoint_thread_match): Likewise. (bpstat_stop_status): Likewise. (bpstat_check_location): Move call to breakpoint_ops.breakpoint_hit to the top. (print_one_breakpoint_location): Call breakpoint_ops.print_one_detail if available. (breakpoint_address_match_range): New function. (breakpoint_location_address_match): Likewise. (breakpoint_locations_match): Compare the length field of the locations too. (hw_breakpoint_used_count): Count resources used by all locations in a breakpoint, and use breakpoint_ops.resources_needed if available. (breakpoint_hit_ranged_breakpoint): New function. (resources_needed_ranged_breakpoint): Likewise. (print_it_ranged_breakpoint): Likewise. (print_one_ranged_breakpoint): Likewise. (print_one_detail_ranged_breakpoint): Likewise. (print_mention_ranged_breakpoint): Likewise. (print_recreate_ranged_breakpoint): Likewise. (ranged_breakpoint_ops): New structure. (find_breakpoint_range_end): New function. (break_range_command): Likewise. (delete_breakpoint): Free addr_string_range_end. (update_breakpoint_locations): Add SALS_END argument. Update all callers. Calculate breakpoint length if a non-zero SALS_END is given. Call breakpoint_locations_match instead of breakpoint_address_match. (reset_breakpoint): Find SaL of the end of the range if B is a ranged breakpoint. (_initialize_breakpoint): Register break-range command. * defs.h (print_core_address): Add function prototype. * ppc-linux-nat.c (ppc_linux_ranged_break_num_registers): New function. (ppc_linux_insert_hw_breakpoint): Support ranged breakpoints. (ppc_linux_remove_hw_breakpoint): Likewise. (_initialize_ppc_linux_nat): Initialize to_ranged_break_num_registers. * target.c (update_current_target): Add comment about to_ranged_break_num_registers. (target_ranged_break_num_registers): New function. * target.h (struct target_ops) : New method. (target_ranged_break_num_registers): Add function prototype. * ui-out.c (ui_out_field_core_addr): Move address-printing logic to ... * utils.c (print_core_address): ... here. 2011-03-31 Ulrich Weigand * breakpoint.c (addr_string_to_sals): Avoid uninitialized variable compiler warning. 2011-03-30 Thiago Jung Bauermann * breakpoint.c (breakpoint_re_set_one): Factor out breakpoint-resetting code from here ... (re_set_breakpoint): ... to here ... (addr_string_to_sals): ... and here. 2011-03-29 Pierre Muller * Makefile.in (SFILES): Add missing C sources. (HFILES_NO_SRCDIR): Remove gdbserver subdirectory headers. Add missing headers. 2011-03-29 Mike Frysinger * .gitignore: New file. 2011-03-29 Mike Frysinger * NEWS: Mention new cfi device simulation. 2011-03-29 Tom Tromey * dwarf2read.c (fixup_partial_die): Handle linkage name on otherwise anonymous types. (dwarf2_name): Likewise. * valops.c (value_struct_elt_for_reference): Refine artificial type logic. Call error if j==-1. 2011-03-29 Andreas Tobler Fix false GCC warning. * infcall.c (find_function_addr): Initialize funaddr. 2011-03-29 Pierre Muller Fix mingw compilation with --enable-targets=all. * remote-mips.c (gdb_usleep.h): Include header. (mips_enter_debug): Use gdb_usleep instead of sleep. 2011-03-28 Jan Kratochvil Support resolution of STT_GNU_IFUNC via breakpoints. * breakpoint.c (print_it_typical): Support bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return. (bpstat_what): Rename parameter to bs_head, new variable bs, adjust the loop. Support bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return. New comment after the loop. New loop for bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return breakpoints. (bptype_string, print_one_breakpoint_location): Support bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return. (user_settable_breakpoint): Return true also for bp_gnu_ifunc_resolver. (allocate_bp_location): Support bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return. (set_breakpoint_location_function): New parameter explicit_loc, describe it. Call find_pc_partial_function_gnu_ifunc with new variable IS_GNU_IFUNC and adjust the address for STT_GNU_IFUNC if EXPLICIT_LOC is not set. (set_raw_breakpoint): Set EXPLICIT_LOC for set_breakpoint_location_function. (clone_momentary_breakpoint): Use true for EXPLICIT_LOC of set_breakpoint_location_function. (mention): Support bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return. (add_location_to_breakpoint): Set EXPLICIT_LOC for set_breakpoint_location_function. (update_breakpoint_locations): Remove static. (breakpoint_re_set_one): Support bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return. * breakpoint.h (enum bptype): New fields bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return. (update_breakpoint_locations): New declaration. * elfread.c: Include gdbthread.h and regcache.h. (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): New functions. (elf_gnu_ifunc_fns): Install them. * minsyms.c (stub_gnu_ifunc_resolver_stop) (stub_gnu_ifunc_resolver_return_stop): New functions. (stub_gnu_ifunc_fns): Install them. * symtab.h (struct gnu_ifunc_fns): New fields gnu_ifunc_resolver_stop and gnu_ifunc_resolver_return_stop. (gnu_ifunc_resolver_stop, gnu_ifunc_resolver_return_stop): New. 2011-03-28 Jan Kratochvil STT_GNU_IFUNC reader implementation. * elfread.c: Include gdbtypes.h, value.h and infcall.h. (SYMBOL_GOT_PLT_SUFFIX, elf_rel_plt_read) (elf_objfile_gnu_ifunc_cache_data, struct elf_gnu_ifunc_cache) (elf_gnu_ifunc_cache_hash, elf_gnu_ifunc_cache_eq) (elf_gnu_ifunc_record_cache, elf_gnu_ifunc_resolve_by_cache) (elf_gnu_ifunc_resolve_by_got, elf_gnu_ifunc_resolve_name) (elf_gnu_ifunc_resolve_addr): New. (elf_symfile_read): Call elf_rel_plt_read. (elf_gnu_ifunc_fns): New. (_initialize_elfread): Initialize elf_objfile_gnu_ifunc_cache_data. Install elf_gnu_ifunc_fns. * infcall.c (find_function_return_type): New function. (find_function_addr): Resolve TYPE_GNU_IFUNC functions, if possible. * minsyms.c (stub_gnu_ifunc_resolve_addr) (stub_gnu_ifunc_resolve_name): New functions. (stub_gnu_ifunc_fns, gnu_ifunc_fns_p): New variables. * symtab.h (struct gnu_ifunc_fns, gnu_ifunc_resolve_addr) (gnu_ifunc_resolve_name, gnu_ifunc_fns_p): New. 2011-03-28 Jan Kratochvil Code cleanup for later STT_GNU_IFUNC support. * infcall.c (find_function_addr): Remove variable code, use explicit dereferences for it. Move VALUE_TYPE initialization later. 2011-03-28 Jan Kratochvil GDB find_pc_partial_function support for STT_GNU_IFUNC. * blockframe.c (cache_pc_function_is_gnu_ifunc): New variable. (clear_pc_function_cache): Clear it. (find_pc_partial_function): Rename to ... (find_pc_partial_function_gnu_ifunc): ... this function. New parameter is_gnu_ifunc_p, describe it. Set *IS_GNU_IFUNC_P. (find_pc_partial_function): New wrapper for this function. * symtab.h (find_pc_partial_function_gnu_ifunc): New declaration. 2011-03-28 Jan Kratochvil GDB internal type support for STT_GNU_IFUNC. * elfread.c (record_minimal_symbol): Support mst_text_gnu_ifunc. (elf_symtab_read): Set mst_text_gnu_ifunc for BSF_GNU_INDIRECT_FUNCTION. * eval.c (evaluate_subexp_standard): Support TYPE_GNU_IFUNC. * gdbtypes.c (init_type): Support TYPE_FLAG_GNU_IFUNC, builtin_func_func, nodebug_text_gnu_ifunc_symbol and nodebug_got_plt_symbol. * gdbtypes.h (enum type_flag_value): New entry TYPE_FLAG_GNU_IFUNC. (TYPE_GNU_IFUNC): New. (struct main_type): New field flag_gnu_ifunc. (struct builtin_type): New field builtin_func_func. (struct objfile_type): New fields nodebug_text_gnu_ifunc_symbol and nodebug_got_plt_symbol. * minsyms.c (lookup_minimal_symbol_text): Support mst_text_gnu_ifunc. (in_gnu_ifunc_stub): New. (prim_record_minimal_symbol, find_solib_trampoline_target): Support mst_text_gnu_ifunc. * parse.c (write_exp_msymbol): New variable ifunc_msym. Detect and support mst_text_gnu_ifunc. Support mst_slot_got_plt. * solib-svr4.c (svr4_in_dynsym_resolve_code): Return true also for in_gnu_ifunc_stub. * symmisc.c (dump_msymbols): Support mst_text_gnu_ifunc. * symtab.c (search_symbols): Likewise. * symtab.h (enum minimal_symbol_type): New fields mst_text_gnu_ifunc and mst_slot_got_plt. (in_gnu_ifunc_stub): New declaration. 2011-03-28 Jan Kratochvil Support a ring of related breakpoints. * breakpoint.c (watchpoint_del_at_next_stop): New, move here code from other functions, add gdb_assert. (update_watchpoint, watchpoint_check): Add gdb_assert. Use watchpoint_del_at_next_stop. (bpstat_check_watchpoint): Use watchpoint_del_at_next_stop. (bpstat_stop_status): Handle ring in related_breakpoint. (set_raw_breakpoint_without_location): Initialize ring in related_breakpoint. (delete_breakpoint): Handle ring in related_breakpoint, use watchpoint_del_at_next_stop. (map_breakpoint_numbers): Handle ring in related_breakpoint. 2011-03-28 Tom Tromey PR symtab/12441: * dwarf2read.c (prepare_one_comp_unit): Don't call set_cu_language with `language_minimal'. 2011-03-25 Ulrich Weigand * arm-tdep.c (arm_elf_make_msymbol_special): Use ARM_SYM_BRANCH_TYPE instead of checking for STT_ARM_TFUNC symbol type. 2011-03-25 Tom Tromey * linespec.c (symbol_found): Restore line-based result for non-LOC_LABEL symbols. 2011-03-25 Kai Tietz * tui/tui-source.c (tui_set_source_content): Use filename_cmp instead of strcmp for comparison. (tui_source_is_displayed): Likewise. * tui/tui-winsource.c (tui_update_breakpoint_info): Likewise. 2011-03-24 Mark Wielaard * dwarf2read.c (lookup_signatured_type): Use DW_FORM_ref_sig8 in complaint. (skip_one_die): Use DW_FORM_ref_sig8, not DW_FORM_sig8. (find_partial_die_in_comp_unit): Likewise in comment. (read_attribute_value): Likewise. (lookup_die_type): Likewise. (dwarf_form_name): Likewise. (dump_die_shallow): Likewise. (follow_die_ref_or_sig): Likewise. 2011-03-24 Tom Tromey PR breakpoints/11816: * linespec.c (decode_line_1): Parse `function:label' linespecs. (decode_compound): Update. (find_function_symbol): New function. (decode_dollar): Update. (decode_label): Add 'function_symbol' parameter. Handle function-relative labels. (decode_variable): Update. (symbol_found): Add 'function_symbol' parameter. Use label's PC, not its line. Set `special_display' and canonical name for labels. 2011-03-24 Tom Tromey * linespec.h (struct linespec_result) : New field. * breakpoint.h (struct breakpoint) : New field. * breakpoint.c (print_breakpoint_location): Respect display_canonical. (create_breakpoint_sal): Add 'display_canonical' parameter. (create_breakpoints_sal): Update. (create_breakpoint): Update. 2011-03-24 Tom Tromey * symtab.c (decode_line_spec): Update. * linespec.c (build_canonical_line_spec): Change type of 'canonical'. (decode_line_2, decode_line_1, decode_objc, decode_compound) (find_method, decode_all_digits, decode_dollar, decode_label) (symbol_found): Likewise. (init_linespec_result): New function. * breakpoint.c (struct captured_parse_breakpoint_args) : New field, replaces addr_string_p. (create_breakpoints_sal): Add 'canonical' parameter, replacing 'addr_string'. (parse_breakpoint_sals): Likewise. (do_captured_parse_breakpoint): Update. (create_breakpoint): Use struct linespec_result. (until_break_command): Update. (breakpoint_re_set_one): Update. (decode_line_spec_1): Update. * linespec.h (struct linespec_result): New. (init_linespec_result): Declare. 2011-03-23 Pedro Alves * regcache.c (regcache_raw_read): If the target didn't supply a given raw register, mark it as unavailable. 2011-03-23 Kai Tietz * breakpoint.c (clear_command): Use filename_cmp instead of strcmp for comparison. * buildsym.c (watch_main_source_file_lossage): Likewise. (patch_subfile_names): Use IS_DIR_SEPARATOR instead of checking just for slash. * dbxread.c (read_dbx_symtab): Use lbasename instead of strrchr and filename_cmp instead of strcmp for filenames. (add_old_header_file): Use filename_cmp instead of strcmp for comparison. * exec.c (exec_set_section_address): Likewise. * macrotab.c (macro_lookup_inclusion): Likewise. (macro_lookup_inclusion): Likewise. * elfread.c (_initialize_elfread): Likewise. (elfstab_offset_sections): Likewise. (elfstab_offset_sections): Use lbasename instead of strrchr. * mdebugread.c (parse_partial_symbols): Likewise. (arse_partial_symbols): Use filename_(n)cmp instead of str(n)cmp for comparison. * minsyms.c (lookup_minimal_symbol): Likewise. * psymtab.c (read_psymtabs_with_filename): Likewise. * solib.c (solib_read_symbols): Likewise. (reload_shared_libraries_1): Likewise. * symmisc.c (maintenance_print_symbols): Likewise. * symfile.c (separate_debug_file_exists): Likewise. (reread_symbols): Likewise. (find_separate_debug_file_by_debuglink): Likewise. * remote-fileio.c (remote_fileio_func_rename): Likewise. * source.c (add_path): Likewise. * symtab.c (filename_seen): Likewise. (file_matches): Likewise. (print_symbol_info): Likewise. (maybe_add_partial_symtab_filename): Likewise. (make_source_files_completion_list): Likewise. * xml-syscall.c (init_sysinfo): Likewise. * windows-nat.c (_initialize_check_for_gdb_ini): Use IS_DIR_SEPARATOR for checking for trailing path separator. 2011-03-22 Jan Kratochvil * dwarf2expr.c (execute_stack_op): Handle DW_OP_GNU_entry_value. New label abort_expression. * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Handle DWARF_VALUE_OPTIMIZED_OUT. 2011-03-22 Jan Kratochvil Code cleanup. * c-typeprint.c (c_type_print_args): Change parameter show_artificial to linkage_name. Invert its value. Update the function comment. (c_type_print_varspec_suffix): Invert it at the caller. * dwarf2read.c (dwarf2_compute_name): Invert it at the caller. 2011-03-22 Pedro Alves * infcmd.c (post_create_inferior): Ignore NOT_AVAILABLE_ERROR errors when reading the `stop_pc'. * printcmd.c (pc_prefix): Use get_frame_pc_if_available instead of get_frame_pc. 2011-03-22 Phil Muldoon * NEWS: Document gdb.Write stream keyword. 2011-03-22 Jan Kratochvil Revert: 2011-03-21 Jan Kratochvil * dwarf2read.c (producer_is_gxx_lt_4_6): New function. (dwarf2_add_field): Fix new_field->accessibility for cu->header.version >= 3 while verifying also producer_is_gxx_lt_4_6. 2011-03-22 Phil Muldoon PR python/12183 * python/py-function.c (fnpy_call): Treat GdbErrors differently to other error classes. Do not print stack trace. 2011-03-21 Jan Kratochvil * dwarf2read.c (producer_is_gxx_lt_4_6): New function. (dwarf2_add_field): Fix new_field->accessibility for cu->header.version >= 3 while verifying also producer_is_gxx_lt_4_6. 2011-03-21 Ulrich Weigand * arm-tdep.c (arm_analyze_prologue): Do not abort parsing when encountering a load via a non-SP register. 2011-03-21 Ulrich Weigand * tramp-frame.c (tramp_frame_prepend_unwinder): Set stop_reason field in returned unwinder. 2012-03-21 Jan Kratochvil * ada-lang.c (replace_operator_with_call): Copy also GDBARCH. 2012-03-21 Joel Brobecker * ada-lang.c (replace_operator_with_call): Use xzalloc instead of xmalloc. 2012-03-18 Pedro Alves * frame.c (frame_unwind_register): Throw an error if unwinding the register failed. * get_prev_frame_1 (get_prev_frame_1): Ask the unwinder if there's an unwind stop reason. (frame_stop_reason_string): Handle UNWIND_UNAVAILABLE. * frame.h (enum unwind_stop_reason) : New. * inline-frame.c (inline_frame_unwind): Install default_frame_unwind_stop_reason. * frame-unwind.c: Include "exceptions.h". (frame_unwind_find_by_frame): Swallow NOT_AVAILABLE_ERROR errors. (default_frame_unwind_stop_reason): New. * frame-unwind.h (frame_unwind_stop_reason_ftype): New typedef. (default_frame_unwind_stop_reason): Declare. (struct frame_unwind) : New function pointer. * dummy-frame.c: Install default_frame_unwind_stop_reason. * dwarf2-frame.c: Include exceptions.h. (struct dwarf2_frame_cache) : New field. (dwarf2_frame_cache): Swallow NOT_AVAILABLE_ERROR errors when computing the CFA. If such an error was thrown, set unavailable_retaddr. (dwarf2_frame_unwind_stop_reason): New. (dwarf2_frame_this_id): Don't build a frame id if the CFA was unavailable. (dwarf2_frame_unwind): Install dwarf2_frame_unwind_stop_reason. (dwarf2_signal_frame_unwind): Ditto. * amd64-tdep.c: Include "exceptions.h". (struct amd64_frame_cache): New field "base_p". (amd64_init_frame_cache): Clear it. (amd64_frame_cache_1): New, factored out from amd64_frame_cache. Avoid reading registers with functions that throw if the register is not necessary to compute the frame base. (amd64_frame_cache): Reimplement wrapping amd64_frame_cache_1, and swallowing NOT_AVAILABLE_ERROR. (amd64_frame_unwind_stop_reason): New. (amd64_frame_this_id): Don't build a frame id if the frame base was unavailable. (amd64_frame_unwind): Install amd64_frame_unwind_stop_reason. (amd64_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set base_p if the frame base was computable. (amd64_sigtramp_frame_unwind_stop_reason): New. (amd64_sigtramp_frame_this_id): Don't build a frame id if the frame base was unavailable. (amd64_sigtramp_frame_unwind): Install amd64_sigtramp_frame_unwind_stop_reason. (amd64_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set base_p if the frame base was computable. (amd64_epilogue_frame_unwind_stop_reason): New. (amd64_epilogue_frame_this_id): Don't build a frame id if the frame base was unavailable. (amd64_epilogue_frame_unwind): Install amd64_epilogue_frame_unwind_stop_reason. * i386-tdep.c: Include "exceptions.h". (struct i386_frame_cache): New field "base_p". (i386_init_frame_cache): Clear it. (i386_frame_cache_1): New, factored out from amd64_frame_cache. Avoid reading registers with functions that throw if the register is not necessary to compute the frame base. (i386_frame_cache): Reimplement wrapping amd64_frame_cache_1, and swallowing NOT_AVAILABLE_ERROR. (i386_frame_unwind_stop_reason): New. (i386_frame_this_id): Don't build a frame id if the frame base was unavailable. (i386_frame_prev_register): Handle unavailable SP. (i386_frame_unwind): Install i386_frame_unwind_stop_reason. (i386_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set base_p if the frame base was computable. (i386_epilogue_frame_unwind_stop_reason): New. (i386_epilogue_frame_this_id): Don't build a frame id if the frame base was unavailable. (i386_epilogue_frame_unwind): Install i386_epilogue_frame_unwind_stop_reason. (i386_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set base_p if the frame base was computable. (i386_sigtramp_frame_unwind_stop_reason): New. (i386_sigtramp_frame_this_id): Don't build a frame id if the frame base was unavailable. (i386_sigtramp_frame_unwind): Install i386_sigtramp_frame_unwind_stop_reason. * sentinel-frame.c (sentinel_frame_prev_register): Use the value type's size, not the register's. (sentinel_frame_unwind): Install default_frame_unwind_stop_reason. * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind): Install default_frame_unwind_stop_reason. * alpha-tdep.c (alpha_sigtramp_frame_unwind) (alpha_heuristic_frame_unwind): Ditto. * amd64obsd-tdep.c (amd64obsd_trapframe_unwind): Ditto. * arm-tdep.c (arm_prologue_unwind, arm_stub_unwind): Ditto. * avr-tdep.c (avr_frame_unwind): Ditto. * cris-tdep.c (cris_sigtramp_frame_unwind, cris_frame_unwind): Ditto. * frv-linux-tdep.c (frv_linux_sigtramp_frame_unwind): Ditto. * frv-tdep.c (frv_frame_unwind): Ditto. * h8300-tdep.c (h8300_frame_unwind): Ditto. * hppa-hpux-tdep.c (hppa_hpux_sigtramp_frame_unwind): Ditto. * hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind): Ditto. * hppa-tdep.c (hppa_frame_unwind, hppa_fallback_frame_unwind) (hppa_stub_frame_unwind): Ditto. * i386obsd-tdep.c (i386obsd_trapframe_unwind): Ditto. * ia64-tdep.c (ia64_frame_unwind, ia64_sigtramp_frame_unwind) (ia64_libunwind_frame_unwind) (ia64_libunwind_sigtramp_frame_unwind): Ditto. * iq2000-tdep.c (iq2000_frame_unwind): Ditto. * lm32-tdep.c (lm32_frame_unwind): Ditto. * m32c-tdep.c (m32c_unwind): Ditto. * m32r-linux-tdep.c (m32r_linux_sigtramp_frame_unwind): Ditto. * m32r-tdep.c (m32r_frame_unwind): Ditto. * m68hc11-tdep.c (m68hc11_frame_unwind): Ditto. * m68k-tdep.c (m68k_frame_unwind): Ditto. * m68klinux-tdep.c (m68k_linux_sigtramp_frame_unwind): Ditto. * m88k-tdep.c (m88k_frame_unwind): Ditto. * mep-tdep.c (mep_frame_unwind): Ditto. * microblaze-tdep.c (microblaze_frame_unwind): Ditto. * mips-tdep.c (mips_insn16_frame_unwind, mips_insn32_frame_unwind) (mips_stub_frame_unwind): Ditto. * mn10300-tdep.c (mn10300_frame_unwind): Ditto. * moxie-tdep.c (moxie_frame_unwind): Ditto. * mt-tdep.c (mt_frame_unwind): Ditto. * ppc-linux-tdep.c (ppu2spu_unwind): Ditto. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_unwind): Ditto. * rs6000-tdep.c (rs6000_frame_unwind): Ditto. * s390-tdep.c (s390_frame_unwind, s390_stub_frame_unwind) (s390_sigtramp_frame_unwind): Ditto. * score-tdep.c (score_prologue_unwind): Ditto. * sh-tdep.c (sh_frame_unwind): Ditto. * sh64-tdep.c (sh64_frame_unwind): Ditto. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_unwind): Ditto. * sparc-tdep.c (sparc32_frame_unwind): Ditto. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_unwind): Ditto. * sparc64-tdep.c (sparc64_frame_unwind): Ditto. * sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_unwind): Ditto. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_unwind): Ditto. * sparc64obsd-tdep.c (sparc64obsd_frame_unwind) (sparc64obsd_trapframe_unwind): Ditto. * sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_unwind): Ditto. * sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_unwind): Ditto. * spu-tdep.c (spu_frame_unwind, spu2ppu_unwind): Ditto. * v850-tdep.c (v850_frame_unwind): Ditto. * vax-tdep.c (vax_frame_unwind): Ditto. * vaxobsd-tdep.c (vaxobsd_sigtramp_frame_unwind): Ditto. * xstormy16-tdep.c (frame_unwind xstormy16_frame_unwind): Ditto. * xtensa-tdep.c (xtensa_unwind): Ditto. 2011-03-18 Pedro Alves * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Assume there's always a frame. Use get_frame_pc_if_available instead of get_frame_pc, and if there's no PC available, don't look up a symtab. 2011-03-18 Pedro Alves * stack.c (print_frame_local_vars, print_frame_arg_vars): Handle unavailable PC. 2011-03-18 Pedro Alves * tracepoint.c (set_traceframe_context): Handle unavailable PC gracefully. 2011-03-18 Pedro Alves * frame.h (frame_unwind_caller_pc_if_available): Declare. * frame.c (frame_unwind_caller_pc_if_available): New. * stack.c (frame_info): Handle unavailable PC. 2011-03-18 Pedro Alves * frame.c (frame_unwind_pc): Rename to ... (frame_unwind_pc_if_available): ... this. New `pc' output parameter. Change return type to int. Gracefully handle gdbarch_unwind_pc throwing NOT_AVAILABLE_ERROR. Return 0 if that happened, or 1 otherwise. (frame_unwind_pc): Reimplement on top of frame_unwind_pc_if_available. (get_frame_func): Rename to ... (get_frame_func_if_available): New `pc' output parameter. Change return type to int. Gracefully handle the PC not being available. (get_frame_func): Reimplement on top of get_frame_func_if_available. (select_frame): Handle the PC being unavailable. (get_prev_frame): Handle the PC being unavailable. (get_frame_pc_if_available): New. (get_frame_address_in_block_if_available): New. (find_frame_sal): Handle the frame PC not being available. * frame.h (get_frame_pc_if_available): Declare. (get_frame_address_in_block_if_available): Declare. (get_frame_func_if_available): Declare. * stack.c (print_frame_info): Handle the PC being unavailable. (find_frame_funname): Ditto. (print_frame): Handle the PC being unavailable. (get_frame_language): Ditto. * blockframe.c (get_frame_block): Ditto. * macroscope.c (default_macro_scope): Ditto. * tui/tui-stack.c (tui_show_frame_info): Ditto. 2011-03-18 Pedro Alves * dwarf2loc.c (dwarf2_evaluate_loc_desc): Catch NOT_AVAILABLE_ERROR when evaluating the location expression. 2011-03-18 Pedro Alves * dwarf2loc.c (read_pieced_value): Handle get_frame_register_bytes returning that the register piece is unavailable/optimized out. (write_pieced_value): Handle get_frame_register_bytes returning that the register piece is unavailable/optimized out when doing a read-modify write of a bitfield. * findvar.c (value_from_register): Handle get_frame_register_bytes returning that the register piece is unavailable/optimized out. * frame.c (get_frame_register_bytes): New parameters `optimizedp' and `unavailablep'. Throw error on bad debug info. Use frame_register instead of frame_register_read, to fill in the new arguments. * frame.h (get_frame_register_bytes): New parameters `optimizedp' and `unavailablep'. * valops.c: (value_assign): Adjust, and handle get_frame_register_bytes failing. * spu-tdep.c: Include exceptions.h. (spu_software_single_step): Adjust, and handle get_frame_register_bytes failing. (spu_get_longjmp_target): Ditto. * gdbarch.sh (register_to_value): Change to return int. New parameters `optimizedp' and `unavailablep'. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.c (i386_register_to_value): Adjust to new gdbarch_register_to_value interface. * i387-tdep.c (i387_register_to_value): Ditto. * i387-tdep.h (i387_register_to_value): Ditto. * alpha-tdep.c (alpha_register_to_value): Ditto. * ia64-tdep.c (ia64_register_to_value): Ditto. * m68k-tdep.c (m68k_register_to_value): Ditto. * mips-tdep.c (mips_register_to_value): Ditto. * rs6000-tdep.c (rs6000_register_to_value): Ditto. 2011-03-18 Pedro Alves * findvar.c (value_of_register): Mark the value as unavailable, if the register is unavailable. * frame.h (frame_register_unwind): New `unavailablep' parameter. (frame_register): New `unavailablep' parameter. (frame_register_read): Update comment. * frame.c (frame_register_unwind): New `unavailablep' parameter. Set it if the register is unavailable. If the register is unavailable, clear the output buffer. (frame_register): New `unavailablep' parameter. Pass it down. (frame_unwind_register): Adjust. (put_frame_register): Adjust. (frame_register_read): Adjust. Also return false if the register is not available. (frame_register_unwind_location): Adjust. * sentinel-frame.c (sentinel_frame_prev_register): If the register is unavailable, mark the value accordingly. * stack.c (frame_info): Handle unavailable registers. 2011-03-18 Pedro Alves * mi/mi-main.c (register_changed_p): Handle REG_UNAVAILABLE, and simplify, using regcache_cooked_read. 2011-03-18 Pedro Alves * regcache.h (regcache_raw_read, regcache_raw_read_signed) (regcache_raw_read_unsigned, regcache_raw_read_signed) (regcache_raw_read_unsigned, regcache_raw_read_part) (regcache_cooked_read, regcache_cooked_read_signed) (regcache_cooked_read_unsigned, regcache_cooked_read_part) (regcache_cooked_read_ftype): Change return to enum register_status. * regcache.c: Include exceptions.h (regcache_save): Adjust to handle REG_UNAVAILABLE registers. (do_cooked_read): Change return to enum register_status. Always forward to regcache_cooked_read. (regcache_raw_read): Change return to enum register_status. If the register is not REG_VALID, memset the buffer. Return the register's status. (regcache_raw_read_signed): Handle non-REG_VALID registers and return the register's status. (regcache_raw_read_unsigned): Ditto. (regcache_cooked_read): Change return to enum register_status. Assert that with read-only regcaches, the register's status must be known. If the regcache is read-only, and the register is not REG_VALID, memset the buffer. Return the register's status. (regcache_cooked_read_signed): Change return to enum register_status. Handle non-REG_VALID registers and return the register's status. (regcache_cooked_read_unsigned): Change return to enum register_status. Handle non-REG_VALID registers and return the register's status. (regcache_xfer_part, regcache_raw_read_part) (regcache_cooked_read_part): Change return to enum register_status. Return the register's status. (regcache_read_pc): Throw NOT_AVAILABLE_ERROR if the register is unavailable. (regcache_dump): Handle unavailable cooked registers. * frame.c (do_frame_register_read): Adjust interface to match regcache_cooked_read_ftype. * gdbarch.sh (pseudo_register_read): Change return to enum register_status. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.h (i386_pseudo_register_read): Change return to enum register_status. * i386-tdep.c (i386_pseudo_register_read): Change return to enum register_status. If reading a raw register indicates the raw register is not valid, return the raw register's status, otherwise, return REG_VALID. * amd64-tdep.c (amd64_pseudo_register_read): Change return to enum register_status. Handle non-REG_VALID raw registers and return the register's status. * arm-tdep.c (arm_neon_quad_read) (arm_pseudo_read): Change return to enum register_status. Handle non-REG_VALID raw registers and return the register's status. * avr-tdep.c (avr_pseudo_register_read): Ditto. * frv-tdep.c (frv_pseudo_register_read): Ditto. * h8300-tdep.c (h8300_pseudo_register_read): Ditto. * hppa-tdep.c (hppa_pseudo_register_read): Ditto. * m32c-tdep.c (m32c_move_reg_t): Change return to enum register_status. (m32c_raw_read, m32c_raw_write, m32c_banked_read) (m32c_banked_write, m32c_sb_read, m32c_sb_write, m32c_part_read) (m32c_part_write, m32c_cat_read, m32c_cat_write) (m32c_r3r2r1r0_read, m32c_r3r2r1r0_write) (m32c_pseudo_register_read): Change return to enum register_status. Adjust. * m68hc11-tdep.c (m68hc11_pseudo_register_read): Change return to enum register_status. Return the register's status. * mep-tdep.c (mep_pseudo_cr32_read): Change return to enum register_status. Return the register's status. (mep_pseudo_cr64_read, mep_pseudo_register_read): Ditto. * mips-tdep.c (mips_pseudo_register_read): Ditto. * mt-tdep.c (mt_pseudo_register_read): Ditto. * rs6000-tdep.c (move_ev_register_func): New typedef. (e500_move_ev_register): Use it. Change return to enum register_status. Return the register's status. (do_regcache_raw_read): New function. (do_regcache_raw_write): New function. (e500_pseudo_register_read): Change return to enum register_status. Return the register's status. Use do_regcache_raw_read. (e500_pseudo_register_write): Adjust. Use do_regcache_raw_write. (dfp_pseudo_register_read): Change return to enum register_status. Return the register's status. (vsx_pseudo_register_read): Ditto. (efpr_pseudo_register_read): Ditto. (rs6000_pseudo_register_read): Ditto. * s390-tdep.c (s390_pseudo_register_read): Change return to enum register_status. Return the register's status. * sh64-tdep.c (pseudo_register_read_portions): New function. (sh64_pseudo_register_read): Change return to enum register_status. Use pseudo_register_read_portions. Return the register's status. * ia64-tdep.c (ia64_pseudo_register_read): Change return to enum register_status. Return the register's status. * sh-tdep.c (pseudo_register_read_portions): New function. (sh_pseudo_register_read): Change return to enum register_status. Use pseudo_register_read_portions. Return the register's status. * sparc-tdep.c (sparc32_pseudo_register_read): Change return to enum register_status. Return the register's status. * sparc64-tdep.c (sparc64_pseudo_register_read): Ditto. * spu-tdep.c (spu_pseudo_register_read_spu) (spu_pseudo_register_read): Ditto. * xtensa-tdep.c (xtensa_register_read_masked) (xtensa_pseudo_register_read): Ditto. * bfin-tdep.c (bfin_pseudo_register_read): Ditto. 2011-03-18 Pierre Muller * python/py-value.c (valpy_getitem): Fix formatting of error function call. 2011-03-18 Pierre Muller ARI fixes: Add missing internationalization markups throughout C source files. * darwin-nat-info.c: Ditto. * record.c: Ditto. * remote.c: Ditto. * mi/mi-main.c: Ditto. 2011-03-18 Pierre Muller ARI fixes: Add missing internationalization markups throughout yacc files. * c-exp.y: Ditto. * cp-name-parser.y: Ditto. * f-exp.y: Ditto. * m2-exp.y: Ditto. * objc-exp.y: Ditto. * p-exp.y: Ditto. 2011-03-18 Pierre Muller ARI fixes: Messages should have no trailing new lines. * darwin-nat.c (mach_check_error): Remove trailing new line from warning function call message. * record.c (bfdcore_read): Idem for error call. 2011-03-18 Pierre Muller * common/signals.c (target_signal_from_host): Add _ markup to error function call message. (target_signal_to_host): Add _ markup and remove trailing new line from warning call message. (target_signal_from_command): Add _ markup to error function call message. 2011-03-18 Phil Muldoon PR python/12149 * python/python.c (gdbpy_write): Accept a stream argument and operate to the appropriate stream. (gdbpy_flush): Likewise. (_initialize_python): Add stream constants. (finish_python_initialization): Add GdbOutputErrorFile class. 2011-03-18 Kwok Cheung Yeung * MAINTAINERS: Add myself as a write-after-approval maintainer. 2011-03-18 Kwok Cheung Yeung * amd64-tdep.c (amd64_relocate_instruction): Fix ordering of arguments to store_signed_integer. Add debug message when relocating CALL instructions. Fix formatting of debug message. * i386-tdep.c (i386_relocate_instruction): Ditto. 2011-03-17 Joel Brobecker * target.h (struct target_ops): Remove to_lookup_symbol field. (target_lookup_symbol): Delete macro. * target.c (nosymbol, debug_to_lookup_symbol): Delete. (update_current_target, setup_target_debug): Remove handling of to_lookup_symbol target_ops field. * ada-tasks.c (get_known_tasks_addr): Remove use of target_lookup_symbol. * coffread.c (coff_symtab_read): Likewise. * dbxread.c (read_dbx_symtab): Ditto. 2011-03-17 Joel Brobecker PR gdb/12116: * configure.ac: Add getthrds declaration check. * configure, config.in: Regenerate. * aix-thread.c (getthrds): Declare only if not already declared in procinfo.h. More declaration out of get_signaled_thread to global scope. 2011-03-17 Phil Muldoon * python/py-symtab.c: Populate symtab_object_methods, sal_object_methods. (stpy_is_valid): New function. (salpy_is_valid): Ditto. * python/py-symbol.c: Declare symbol_object_methods. Populate. (sympy_is_valid): New function. * python/py-objfile.c: Declare objfile_object_methods. Populate. (objfpy_is_valid): New function. * python/py-inferior.c: Populate inferior_object_methods. (infpy_is_valid): New function. * python/py-infthread.c: Populate thread_object_methods. (thpy_is_valid): New function. * python/py-block.c: Declare block_object_methods. Populate. Declare block_iterator_object_methods. Populate. (blpy_is_valid): New function. (blpy_iter_is_valid): Ditto. 2011-03-16 Keith Seitz * linespec.c (find_methods): Canonicalize NAME before looking up the symbol. (name_end): New function. (keep_name_info): New function. (decode_line_1): Use keep_name_info. (decode_compound): Likewise. * cli/cli-utils.h (remove_trailing_whitespace): New function. * cli/cli-utils.c (remove_trailing_whitespace): Likewise. PR c++/12273 * linespec.c (locate_first_half): Keep overload information, too. (decode_compound): Use a string to represent break characters to escape the loop. If P points to a break character, do not increment it. For C++ and Java, keep overload information and relevant keywords. If we cannot find a symbol, search the minimal symbols. PR c++/11734 * linespec.c (decode_compound): Rename SAVED_ARG to THE_REAL_SAVED_ARG. Make a copy of THE_REAL_SAVED_ARG in SAVED_ARG and strip single-quotes. Pass a valid block to lookup_symbol. (lookup_prefix_sym): Likewise. (find_method): Construct search name based on SYM_CLASS instead of SAVED_ARG. * psymtab.c (lookup_partial_symbol): Add language parameter. (lookup_symbol_aux_psymtabs): Likewise. Don't assume that the psymtab we found was the right one. Search for the desired symbol in the symtab to be certain. (psymtab_search_name): New function. (lookup_partial_symbol): Use psymtab_search_name. Add language parameter. (read_symtabs_for_function): Add language parameter and pass to lookup_partial_symbol. (find_symbol_file_from_partial): Likewise. 2011-03-16 Paul Pluzhnikov PR gdb/12528 * dwarf2read.c (noop_record_line): New function. (dwarf_decode_lines): Ignore line tables for GCd functions. 2011-03-16 Pierre Muller Fix ARI warnings about new lines at the end of messages, which are unneeded as there is a new line added at the end of the message automatically. * darwin-nat.c (darwin_stop_inferior): Ditto. * dec-thread.c (dec_thread_get_ada_task_ptid): Ditto. * dfp.c (decimal_to_number): Ditto. * exec.c (print_section_info): Ditto. * i386-darwin-nat.c (darwin_set_sstep): Ditto. * osdata.c (get_osdata): Ditto. * record.c (bfdcore_write): Ditto. * remote-mips.c (mips_readchar): Ditto. * remote.c (read_ptid): Ditto. * ser-mingw.c (ser_windows_raw): Ditto. * tracepoint.c (add_local_symbols): Ditto. * windows-nat.c (fake_create_process): Ditto. 2011-03-16 Tom Tromey * tracepoint.c (stop_tracing): Don't declare. * event-top.c (after_char_processing_hook): Add `(void)'. 2011-03-16 Phil Muldoon * NEWS: Add Parameter sub-classing description. 2011-03-16 Kai Tietz * MAINTAINERS: Update my e-mail address. 2011-03-15 Andreas Tobler * MAINTAINERS: Add myself for write after approval privileges. 2011-03-15 Michael Snyder * frame.c (find_frame_sal): Assert sym is not null. * dbxread.c (process_one_symbol): Assert 'name' is not null. * objc-lang.c (selectors_info): Check strchr for null result. * stabsread.c (define_symbol): Guard against bad stabstring input. 2011-03-15 Pierre Muller Remove trailing spaces and tabulations from pascal language support sources. p-exp.y: Ditto. p-lang.c: Ditto. p-lang.h: Ditto. p-valprint.c: Ditto. 2011-03-15 Jan Kratochvil * dwarf2read.c (dwarf2_get_pc_bounds): Require HIGH strictly higher than LOW. Comment it. (read_partial_die): Call complaint for inappropriate zero LOWPC or HIGHPC not strictly higher than LOWPC. 2011-03-15 Pierre Muller Fix formatting of function declarations returning a pointer in previous commit. * varobj.c (varobj_add_child): Ditto. * hppa-tdep.h (hppa_init_objfile_priv_data): Ditto. * inferior.h (get_displaced_step_closure_by_addr): Ditto. 2011-03-15 Ulrich Weigand * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Add support for the "generic" vector ABI used with GCC 4.3 and later. (ppc64_sysv_abi_return_value): Likewise. 2011-03-15 Ulrich Weigand * infcall.c (call_function_by_hand): Function return value is always a non_lval, even when using struct_return. 2011-03-15 Pedro Alves * printcmd.c (ALL_DISPLAYS_SAFE): New. (map_display_numbers): New. (do_delete_display): New. (undisplay_command): Use map_display_numbers. (do_enable_disable_display): New. (enable_disable_display_command): New function. (enable_display): Delete. (enable_display_command): New. (disable_display_command): Reimplement. (_initialize_printcmd): Adjust "enable display" command to use `enable_display_command' as callback. 2011-03-14 Phil Muldoon * NEWS: Add Python breakpoint 'stop' operation. 2011-03-14 Phil Muldoon * NEWS: Delete duplicate entry. Fix typo. 2011-03-14 Pierre Muller Fix ARI warning about function names in first column. Put prototype declaration on same line as return type. * objc-exp.y: Ditto. * p-exp.y: Ditto. * python/py-stopevent.h: Ditto. For long function names, split parameters to allow function name on same line as return type. * solib-pa64.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. For long function declaration, use single line. * hppa-tdep.h: Ditto. * inferior.h: Ditto. 2011-03-14 Phil Muldoon * python/python.h: Declare gdbpy_should_stop and gdbpy_breakpoint_has_py_cond. * python/python.c: Add python.h to includes. Remove python.h from HAVE_PYTHON definition (gdbpy_should_stop): New dummy function. (gdbpy_breakpoint_has_py_cond): New dummy function. * python/py-breakpoint.c (bppy_init): Rewrite to allow sub-classing capabilities. (gdbpy_should_stop): New function. (gdbpy_breakpoint_has_py_cond): New function. (local_setattro): New function. * breakpoint.c (condition_command): Add check for Python 'stop' operation. (bpstat_check_breakpoint_conditions): Execute Python 'stop' operation function as part of stop/continue tests. 2011-03-14 Tom Tromey PR gdb/12576: * dwarf2loc.c (dwarf_expr_dwarf_call): Remove 'return'. (needs_frame_dwarf_call): Likewise. 2011-03-14 Pierre Muller Fix ARI warning about functions without parameters that do not use (void). * breakpoint.c (all_tracepoints): Replace () by (void). * f-exp.y (match_string_literal): Ditto. (yylex): Ditto. * m2-exp.y (yylex): Ditto. * mep-tdep.c (current_me_module): Ditto. (current_options): Ditto. (current_cop_data_bus_width): Ditto. (current_cr_names): Ditto. (current_cr_is_float): Ditto. (current_ccr_names): Ditto. * objc-exp.y (yylex): Ditto. * p-exp.y (yylex): Ditto. * remote.c (send_interrupt_sequence): Ditto. * tracepoint.c (current_trace_status): Ditto. * python/py-evts.c (gdbpy_initialize_py_events): Ditto. * python/py-prettyprint.c (push_dummy_python_frame): Ditto. 2011-03-11 Michael Snyder * cli/cli-decode.h (CMD_LIST_AMBIGUOUS): Define. * cli/cli-decode.c (lookup_cmd_1): Use CMD_LIST_AMBIGUOUS. (lookup_cmd): Test for CMD_LIST_AMBIGUOUS. * completer.c (complete_line_internal): Use CMD_LIST_AMBIGUOUS. * top.c (set_verbose): Use CMD_LIST_AMBIGUOUS. * event-loop-c (delete_async_signal_handler): Assert prev_ptr. (delete_async_event_handler): Ditto. * python/py-breakpoint.c (bppy_set_condition): Stop memory leak. * python/py-breakpoint.c (bppy_get_commands): Fix memory leak. * top.c (set_verbose): Assert showcmd was found. 2011-03-11 Maxim Grigoriev * xtensa-tdep.c (warning_once): Correct style issues. 2011-03-11 Yao Qi * arm-tdep.c (copy_ldr_str_ldrb_strb): Remove redundant statements. 2011-03-11 Andreas Schwab * common/aclocal.m4: Remove. 2011-03-10 Maxim Grigoriev * xtensa-tdep.c (windowing_enabled): Remove inline attribute. (xtensa_write_register, xtensa_read_register): Likewise. (xtensa_hextochar): Removed. (xtensa_init_reggroups): Replace xtensa_hextochar () by explicit code. 2011-03-10 Maxim Grigoriev * xtensa-tdep.c (xtensa_c0reg_t): Update comments. (xtensa_call0_frame_cache_t): Update comments. New fields added. (xtensa_alloc_frame_cache): Add initialization for new fields. (xtensa_frame_cache): Change the way how call0_frame_cache () is called. (warning_once): New function. (xtensa_insn_kind): New item c0opc_and. (call0_classify_opcode): Add the case for AND instruction. (call0_track_op): Change arguments. New local variable litbase. Add the case to handle c0opc_and. Update algorithms for c0opc_mov, c0opc_l32r, c0opc_s32i to take into account dynamic stack adjustments in the prologue. Add cases for c0opc_l32e, c0opc_s32e, c0opc_rfwo, c0opc_rfwu. (call0_analyze_prologue): Update the comments. Change arguments. Add the variety of updates to handle extended prologues, which now can conduct dynamic stack adjustments. (call0_frame_cache): Likewise. (xtensa_skip_prologue): Update call0_analyze_prologue () function call. (xtensa_gdbarch_init): Initialize xtensa_session_once_reported. 2011-03-10 Michael Snyder * tracepoint.c (cmd_qtv): Discard unused value 'packet'. (cmd_qtframe): Ditto. (cmd_qtbuffer): Ditto. (cmd_bigqtbuffer): Ditto. 2011-03-10 Tom Tromey * tracepoint.c (trace_actions_command): Update. * thread.c (thread_apply_command): Update. * reverse.c (delete_bookmark_command): Update. (bookmarks_info): Update. * printcmd.c (undisplay_command): Update. * memattr.c (mem_enable_command): Update. (mem_disable_command): Update. (mem_delete_command): Update. * inferior.c (detach_inferior_command): Update. (kill_inferior_command): Update. (remove_inferior_command): Update. * cli/cli-utils.h (struct get_number_or_range_state): New. (init_number_or_range): Declare. (get_number_or_range): Update. * cli/cli-utils.c (init_number_or_range): New function. (get_number_or_range): Change 'pp' parameter to 'state'. Remove static variables. (number_is_in_list): Update. * breakpoint.h (get_tracepoint_by_number): Update. * breakpoint.c (map_breakpoint_numbers): Update for change to get_number_or_range. (find_location_by_number): Use get_number, not get_number_or_range. (trace_pass_set_count): New function. (trace_pass_command): Update for change to get_number_or_range. Rework loop logic. (get_tracepoint_by_number): Remove 'multi_p' parameter; add 'state' parameter. 2011-03-10 Phil Muldoon * python/py-param.c (add_setshow_generic): Add set/show callback parameters. Register Python object context. (get_show_value): New function. (get_set_value): New function. (call_doc_function): New function. (get_doc_string): Move behind get_show_value/get_set_value. 2011-03-10 Andreas Tobler * fbsd-nat.c (fbsd_make_corefile_notes): Constify local `fname'. 2011-03-09 Maxim Grigoriev * xtensa-tdep.c (xtensa_read_register): Add comment. (xtensa_write_register): Likewise. (xtensa_hextochar): Add comment and update to match coding conventions. (xtensa_frame_cache, xtensa_return_value): Follow coding conventions. (execute_l32e, execute_s32e, execute_code): Update comments. (xtensa_exception_handler_t): Update to match coding conventions. (xtensa_insn_kind): Likewise. 2011-03-09 Michael Snyder * mi-cmd-disas.c (mi_cmd_disassemble): Fix memory leak. 2011-03-09 Pedro Alves * nto-tdep.c (nto_find_and_open_solib): Constify local `base'. 2011-03-09 Tom Tromey * thread.c (restore_selected_frame): Handle frame_level == -1. (make_cleanup_restore_current_thread): Use get_selected_frame_if_set. * frame.h (get_selected_frame_if_set): Declare. * frame.c (get_selected_frame_if_set): New function. 2011-03-09 Pedro Alves * cli/cli-cmds.c (shell_escape): Use lbasename. * coffread.c (coff_start_symtab): Constify parameter. (complete_symtab): Constify `name' parameter. (coff_symtab_read): Constify `filestring' local. (coff_getfilename): Constify return and `result' local. Use lbasename. * fbsd-nat.c (fbsd_make_corefile_notes): Use lbasename. * linux-fork.c (info_checkpoints_command): Use lbasename. * linux-nat.c (linux_nat_make_corefile_notes): Use lbasename. * minsyms.c (lookup_minimal_symbol): Use lbasename. * nto-tdep.c (nto_find_and_open_solib): Use lbasename. * procfs.c (procfs_make_note_section): Use lbasename. * tui/tui-io.c (printable_part): Constity return and parameter. Use lbasename. (print_filename): Constify parameters, and local `s'. (tui_rl_display_match_list): Constify local `temp'. 2011-03-09 Jan Kratochvil Revert: 2011-03-08 Jan Kratochvil Fix DWARF-3+ DW_AT_accessibility default assumption. * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for cu->header.version >= 3. 2011-03-09 Yao Qi * common/Makefile.in: Remove. * common/configure: Remove. * common/configure.ac: Remove. 2011-03-09 Yao Qi Revert: 2011-02-11 Yao Qi * common/Makefile.in: Add copyright header. 2011-02-11 Yao Qi * Makefile.in: Remove signals.o from COMMON_OBS. Link libcommon.a. * configure.ac: Add common to sub dir. * configure: Regenerate. 2011-03-08 Maxim Grigoriev * xtensa-tdep.c (call0_ret): New function. (xtensa_skip_prologue): Speed up analysis. 2011-03-08 Maxim Grigoriev * xtensa-tdep.c (xtensa_register_reggroup_p): Count in all registers while executing MI command -data-list-changed-registers. 2011-03-08 Maxim Grigoriev * xtensa-tdep.c (xtensa_read_register): New function. (xtensa_write_register): New function. (xtensa_find_register_by_name): New function. (xtensa_windowed_frame_cache): Update comments in type description. (xtensa_frame_cache): Likewise. (xtensa_window_interrupt_insn): New function. (xtensa_frame_cache): Add analysis for Xtensa Window Exception frames. (xtensa_insn_kind): Add new instructions. (rwx_special_register): New function. (call0_classify_opcode): Add new instructions to the analysis. (a0_saved, a7_saved, a11_saved): New variables. (a0_was_saved, a7_was_saved, a11_was_saved): New variables. (execute_l32e): New function. (execute_s32e): New function. (xtensa_exception_handler_t): New type. (execute_code): New function. (xtensa_window_interrupt_frame_cache): New function to conduct frame analysis for Xtensa Window Exception handlers. 2011-03-08 Maxim Grigoriev * xtensa-tdep.c (TX_PS): New. (windowing_enabled): Update to count for Call0 ABI. (xtensa_hextochar): New. (xtensa_init_reggroups): Make algorithm generic. (xtensa_frame_cache): Use TX_PS on Tiny Xtensa. 2011-03-08 Maxim Grigoriev * xtensa-tdep.h (XTENSA_MAX_COPROCESSOR): Update. 2011-03-08 Michael Snyder * i386-tdep.c (i386_follow_jump): Check return value of target_read_memory. (i386_analyze_struct_return): Ditto. (i386_skip_probe): Ditto. (i386_match_insn): Ditto. (i386_skip_noop): Ditto. (i386_analyze_frame_setup): Ditto. (i386_analyze_register_saves): Ditto. (i386_skip_prologue): Ditto. (i386_skip_main_prologue): Ditto. * target.c (read_whatever_is_readable): Fix memory leak. * i386-tdep.c (i386_process_record): Document fall through. 2011-03-08 Jan Kratochvil Fix DWARF-3+ DW_AT_accessibility default assumption. * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for cu->header.version >= 3. 2011-03-08 Pedro Alves * remote.c (remote_check_symbols): Skip if the target has no execution. 2011-03-08 Joel Brobecker * target.c (read_whatever_is_readable): Reformat comment, with a minor typo fix. Minor reformatting of the code. 2011-03-08 Yao Qi * arm-tdep.c: Remove prototype declaration displaced_in_arm_mode. (displaced_read_reg): Add `dsc' parameter, remove `from' parameter. Use cached result instead of calling displaced_in_arm_mode again. (branch_write_pc, alu_write_pc, load_write_pc): Add `dsc' parameter. (displaced_write_reg, copy_preload, copy_preload_reg): Callers update. (cleanup_copro_load_store, copy_copro_load_store): Likewise. (cleanup_branch, copy_bx_blx_reg, copy_alu_imm): Likewise. (cleanup_alu_reg, copy_alu_reg, cleanup_alu_shifted_reg): Likewise. (copy_alu_shifted_reg, cleanup_load, cleanup_store): Likewise. (copy_extra_ld_st, copy_ldr_str_ldrb_strb): Likewise. (cleanup_block_load_all, cleanup_block_store_pc): Likewise. (cleanup_block_load_pc, copy_block_xfer): Likewise. * arm-linux-tdep.c (arm_linux_copy_svc): Callers update. (arm_catch_kernel_helper_return): Likewise. * gdb/arm-tdep.h : Update function declarations. 2011-03-07 Michael Snyder * dwarf2loc.c (indirect_pieced_value): Assert 'piece' not null. * ser-unix.c (hardwire_get_tty_state): Stop memory leak. * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Free environment. * elfread.c (elf_symtab_read): Stop memory leak. * main.c (captured_main): Fix memory leak. 2011-03-07 Andreas Schwab * ada-lang.c (compare_names): Call is_name_suffix with string1 instead of string2. 2011-03-07 Tom Tromey * xcoffread.c (xcoff_sym_fns): Update. * symfile.h (struct sym_fns) : New field. (enum symfile_add_flags) : New constant. * symfile.c (syms_from_objfile): Handle SYMFILE_NO_READ. (symbol_file_add_with_addrs_or_offsets): Likewise. (reread_symbols): Handle OBJF_PSYMTABS_READ. * somread.c (som_sym_fns): Update. * psymtab.h (require_partial_symbols): Declare. * psymtab.c (require_partial_symbols): New function. (ALL_OBJFILE_PSYMTABS_REQUIRED): New macro. (ALL_OBJFILE_PSYMTABS): Undef. (ALL_PSYMTABS): Move from psympriv.h. (lookup_partial_symtab, find_pc_sect_psymtab) (lookup_symbol_aux_psymtabs, relocate_psymtabs) (find_last_source_symtab_from_partial) (forget_cached_source_info_partial) (print_psymtab_stats_for_objfile, read_symtabs_for_function) (expand_partial_symbol_tables, read_psymtabs_with_filename) (map_symbol_names_psymtab, map_symbol_filenames_psymtab) (find_symbol_file_from_partial, map_matching_symbols_psymtab) (expand_symtabs_matching_via_partial, maintenance_info_psymtabs): Use ALL_OBJFILE_PSYMTABS_REQUIRED. * psympriv.h (ALL_PSYMTABS): Move to psymtab.c. * objfiles.h (OBJF_PSYMTABS_READ): New macro. * objfiles.c (objfile_has_partial_symbols): Handle lazily-read psymtabs. * mipsread.c (ecoff_sym_fns): Update. * machoread.c (macho_sym_fns): Update. * elfread.c (elf_symfile_read): Set up for lazy psymtab reading. (read_psyms): New function. (elf_sym_fns, elf_sym_fns_gdb_index): Update. (elf_sym_fns_lazy_psyms): New global. * dwarf2read.c (dwarf2_initialize_objfile): Don't call dwarf2_build_psymtabs. * dbxread.c (aout_sym_fns): Update. * coffread.c (coff_sym_fns): Update. 2011-03-07 Tom Tromey * infrun.c (print_exited_reason): Include inferior id and pid in message. 2011-03-07 Tom Tromey * target.h (struct target_ops) : Add ptid_t parameter. (target_has_execution_1): Update. (target_has_execution_current): Declare. (target_has_execution): Call target_has_execution_current. (default_child_has_execution): Update. * target.c (default_child_has_execution): Add 'the_ptid' parameter. (target_has_execution_1): Likewise. (target_has_execution_current): New function. (add_target): Update. (init_dummy_target): Update. * remote-m32r-sdi.c (m32r_has_execution): New function. (init_m32r_ops): Use it. * record.c (record_core_has_execution): Now static. Add 'the_ptid' parameter. * inferior.c (have_live_inferiors): Don't save current thread. Use target_has_execution_1. 2011-03-07 Yao Qi * Makefile.in (aclocal_m4_deps): Remove gnulib/m4/memcmp.m4. 2011-03-07 Joel Brobecker * elfread.c (elf_symtab_read): Minor reformatting. 2011-03-07 Joel Brobecker * objc-lang.c (selectors_info): Minor reformatting. 2011-03-07 Joel Brobecker * ada-lang.c (compare_names): Add FALLTHROUGH comment. 2011-03-07 Joel Brobecker Michael Snyder * ada-valprint.c (ada_val_print_array): Move the declaration of "byte_order" and "elttype" inside the block where these variables are actually used. Remove some special handling for the case where "elttype" and "eltlen" are null. Replace by a comment and a couple of assertion checks. 2011-03-05 Michael Snyder * source.c (add_path): Replace semicolon at end of block. * dwarf2expr.c (execute_stack_op): Ditto. 2011-03-05 Mike Frysinger * bfin-tdep.c: Include sim-regno.h and gdb/sim-bfin.h. * configure.tgt (bfin-*-*linux*): Define gdb_sim. (bfin-*-*): Likewise. 2011-03-05 Michael Snyder * dwarf2expr.c (execute_stack_op): Delete superfluous semicolon. * mdebugread.c (parse_symbol): Ditto. * parse.c (parse_exp_in_context): Ditto. * source.c (add_path): Ditto. * utils.c (gnu_debuglink_crc32): Ditto. * varobj.c (variable_language): Ditto. * linux-tdep.c (linux_get_siginfo_type): Stop memory leak. 2011-03-04 Michael Snyder * linux-fork.c (inferior_call_waitptid): Fix copy/paste error. * symfile.c (simple_overlay_update): Check for null return value from lookup_minimal_symbol. * xml-syscall.c (syscall_start_syscall): Assert name is non null. 2011-03-04 Thiago Jung Bauermann * eval.c (parse_and_eval_address_1): Remove function. * linespec.c (decode_indirect): Call parse_to_comma_and_eval instead of parse_and_eval_address_1. * value.h (parse_and_eval_address_1): Remove prototype. 2011-03-04 Michael Snyder * remote.c (putpkt_binary): Document that case stmt falls through. 2011-03-04 Thiago Jung Bauermann * breakpointc (print_it_typical): Move NULL check from here... (print_bp_stop_message): ... to here. 2011-03-04 Michael Snyder * breakpoint.c (enable_command): Use break instead of continue, and fill in a missing break. (disable_command): Ditto. 2011-03-04 Ulrich Weigand * inflow.c (terminal_init_inferior_with_pgrp): Copy ttystate. (terminal_save_ours): Remove misleading comment. (inflow_inferior_data_cleanup): Free ttystate. (inflow_inferior_exit): Likewise. (copy_terminal_info): Copy ttystate. * serial.c (serial_copy_tty_state): New function. * serial.h (serial_copy_tty_state): Add prototype. (struct serial_ops): Add copy_tty_state callback. * ser-base.c (ser_base_copy_tty_state): New function. * ser-base.h (ser_base_copy_tty_state): Add prototype. * ser-go32.c (dos_copy_tty_state): New function. (dos_ops): Install copy_tty_state callback. * ser-mingw.c (_initialize_ser_windows): Likewise. * ser-pipe.c (_initialize_ser_pipe): Likewise. * ser-unix.c (hardwire_copy_tty_state): New function. (_initialize_ser_hardwire): Install it. 2011-03-04 Michael Snyder * breakpoint.c (create_breakpoint): Add missing break statement. Reverting this patch: * infcall.c (call_function_by_hand): Add break statements for lint. Reverting this patch: * cli/cli-script.c (script_from_file): Add break for lint. 2011-03-04 Michael Snyder * solib.c (reload_shared_libraries_1): Close memory leak. 2011-03-03 Tom Tromey PR gdb/12538: * dwarf2read.c (process_psymtab_comp_unit): Handle case where DW_STRING is NULL. 2011-03-03 Michael Snyder * remote-fileio.c (remote_fileio_func_fstat): Initialize all fields of struct 'st' to zero. * tui/tui-winsource.c (tui_update_source_window_as_is): Initialize sal.pspace before calling set_current_source_symtab_and_line. 2011-03-03 Yao Qi * Makefile.in (configure-common): Remove. Let Makefile in dir common to rebuild itself. (common/Makefile): Likewise. 2011-03-03 Joel Brobecker * utils.c (parse_escape): Add i18n markup in error message. 2011-03-03 Yao Qi * gdb/arm-tdep.c (shifted_reg_val): Replace magic number 15 with ARM_PC_REGNUM. (thumb_get_next_pc_raw, arm_get_next_pc_raw): Likewise. (displaced_write_reg, displaced_read_reg): Likewise. (copy_ldr_str_ldrb_strb, cleanup_block_load_all): Likewise. (cleanup_block_load_pc, copy_block_xfer): Likewise. (cleanup_branch): Replace magic number 14 and 15 with ARM_LR_REGNUM and ARM_PC_REGNUM respectively. 2011-03-02 Michael Snyder * maint.c (maintenance_do_deprecate): No need to check for NULL. * cli/cli-script.c (script_from_file): Add break for lint. * mdebugread.c (parse_partial_symbols): Fix indent. * target-descriptions.c (tdesc_gdb_type): No need to call xstrdup, callee saves a copy. * printcmd.c (print_scalar_formatted): Use strncpy for safety. * infcall.c (call_function_by_hand): Add break statements for lint. * utils.c (parse_escape): Escape the escape char. * python/py-inferior.c (build_inferior_list): Error out if PyList_Append fails. (gdbpy_inferiors): Error out if build_inferior_list fails. * linux-nat.c (linux_nat_xfer_partial): Preserve errno around a function call. * record.c (record_restore): Move printf to before error return. 2011-03-02 Yao Qi * arm-tdep.h (struct displaced_step_closure): Add two new fields is_thumb and insn_size. * arm-tdep.c (displaced_read_reg): Adjust correct pipeline offset on both ARM and Thumb mode. (arm_process_displaced_insn): Set is_thumb and insn_size. (arm_displaced_init_closure): Handle both 16-bit and 32-bit. (arm_displaced_step_fixup): Likewise. 2011-03-01 Michael Snyder * cli/cli-dump.c (dump_bfd_file): Check error return and warn. * jv-lang.c (evaluate_subexp_java): Conditional can't be true. * dwarf2read.c (dwarf2_compute_name): NAME cannot be null here. * cli/cli-dump.c (restore_binary_file): Validate ftell return value. * ada-lang.c (ada_make_symbol_completion_list): Replace malloc with xmalloc. * ada-lang.c (aggregate_assign_others): Rename inner scope variable which shadows function parameter. * tracepoint.c (create_tsv_from_upload): Superfluous call to xstrdup. Callee already calls xstrdup. * linespec.c (decode_line_1): Remove unnecessary null check. * tracepoint.c (scope_info): Fix mem leak, remove underused variable. * python/py-prettyprint.c (apply_val_pretty_printer): Remove superfluous null check. * std-regs.c (value_of_builtin_frame_pc_reg): Frame can't be null. (value_of_builtin_frame_fp_reg): Ditto. * event-top.c (display_gdb_prompt): Remove superfluous null check. * python/py-prettyprint.c (apply_val_pretty_printer): VAL may be null. * linespec.c (decode_line_1): Check for null before dereference. * reverse.c (record_restore): Move null-check to before pointer dereference. * python/py-utils.c (gdbpy_obj_to_string): Delete unused variable. * objc-lang.c (selectors_info): Add explanitory comment. (classes_info): Ditto. 2011-03-01 Ulrich Weigand * arm-linux-tdep.c (ARM_LDR_PC_SP_4): Add define. (arm_linux_restart_syscall_init): Handle both on-stack and in-kernel versions of the trampoline. Handle Thumb vs. ARM addresses. (arm_kernel_linux_restart_syscall_tramp_frame): New global. (arm_linux_init_abi): Install it. * arm-tdep.c (arm_psr_thumb_bit): Make global. * arm-tdep.c (arm_psr_thumb_bit): Add prototype. 2011-02-28 Michael Snyder * ui-out.c (ui_out_field_core_addr): Make local char buffer a little bigger, to avoid possibility of an overflow. * breakpoint.c (breakpoint_adjustment_warning): Make local char buffers a little bigger, to avoid possibility of an overflow. * coffread.c (coff_getfilename): Add check to avoid overflow. * objc-lang.c (selectors_info): Add a small safety margin to avoid overflow. (classes_info): Error out on too long REGEXP. * infrun.c (handle_inferior_event): Remove unused function call. * fork-child.c (fork_inferior): Remove ifdef'd code and unused variable. * linux-thread-db.c (attach_thread): Discard unused value. * linux-nat.c (linux_handle_extended_wait): Delete unused variable. * remote.c (remote_get_noisy_reply): Discard unused value. (remote_vcont_resume): Ditto. (remote_stop_ns): Ditto. * linespec.c (decode_objc): Delete unused variable. * tui/tui-regs.c (tui_register_format): Delete unused variable. * dwarf2read.c (add_partial_symbol): Discard unused values. (read_base_type): Delete unused variable. * dbxread.c (read_dbx_symtab): Discard unused value. * eval.c (evaluate_subexp_standard): Delete unused variable, and discard unused values. * infcmd.c (_initialize_infcmd): Discard unused values. * stabsread.c (rs6000_builtin_type): Missing break statement. * dbxread.c (process_one_symbol): Discard unused value. * coffread.c (coff_end_symtab): Delete unused variable. * dwarf2read.c (dw2_get_file_names): Discard unused value. (dwarf2_add_typedef): Delete unused variable. (read_namespace): Ditto. (dwarf_decode_macros): Ditto. * m2-lang.c (evaluate_subexp_modula2): Discard unused variable. * opencl-lang.c (evaluate_subexp_opencl): Discard unused value. * p-valprint.c (pascal_val_print): Discard unused value. * utils.c (nquery): Call va_end before return; (yquery): Ditto. (query): Ditto. * proc-service.c (ps_plog): Call va_end before return. 2011-02-28 Tom Tromey * python/python.c (gdbpy_value_cst): New global. (_initialize_python): Initialize it. * python/python-internal.h (gdbpy_value_cst): Declare. * python/py-value.c (convert_value_from_python): Use gdbpy_value_cst. 2011-02-28 Michael Snyder * python/py-cmd.c (cmdpy_init): Fix memory leak. * breakpoint.c (catch_syscall_completer): Free malloced list. * jv-lang.c (java_primitive_type_from_name): Add missing break. * opencl-lang.c (lval_func_check_validity): Rename inner variables. (lval_func_check_synthetic_pointer): Ditto. (lval_func_free_closure): Fix use-after-free. 2011-02-28 Tom Tromey * psymtab.c (expand_partial_symbol_tables): Use ALL_OBJFILE_PSYMTABS. 2011-02-28 Jan Kratochvil * objc-lang.c (selectors_info): Error on too long REGEXP. 2011-02-28 Michael Snyder * python/py-param.c (set_parameter_value): Add missing break statement. * linux-record.c (record_linux_system_call): Add missing break statement. 2011-02-28 Ulrich Weigand * breakpoint.c (print_one_breakpoint_location): Remove unused argument PRINT_ADDRESS_BITS. Update callers. (print_one_breakpoint): Likewise. 2011-02-28 Ulrich Weigand * breakpoint.c (wrap_indent_at_field): New function. (print_breakpoint_location): Use it instead of WRAP_INDENT argument. Allocate ui_stream locally instead of using STB argument. (print_one_breakpoint_location): Update call. * ui-out.c (ui_out_query_field): New function. * ui-out.h (ui_out_query_field): Add prototype. 2011-02-28 Joel Brobecker From Michael Snyder * ada-exp.y (write_object_renaming): Add FALLTHROUGH comment. 2011-02-27 Michael Snyder * objc-lang.c (selectors_info): Prevent string overrun. * tui/tui-stack.c (tui_get_function_from_frame): Fix off by one error in strncpy. * symtab.c (rbreak_command): Move variable 'file_name' to outer scope. * d-valprint.c (dynamic_array_type): Avoid shadowing a function param with a local variable of the same name. 2011-02-27 Michael Snyder * value.c (value_from_history_ref): New function. * value.h (value_from_history_ref): Export. * cli/cli-utils.c (get_number_trailer): Use value_from_history_ref to parse value history references. * cli/cli-utils.h (get_number_trailer): Update comment. 2011-02-27 Michael Snyder * inferior.c (detach_inferior_command): Use get_number_or_range. (kill_inferior_command): Ditto. (remove_inferior_command): Ditto. (initialize_inferiors): Make command names plural. Update help strings. 2011-02-27 Michael Snyder * darwin-nat-info.c: Fix comment typo. * dwarf2expr.h: Ditto. * fbsd-nat.c: Ditto. * fbsd-nat.h: Ditto. * frame-unwind.h: Ditto. * frame.h: Ditto. * hppa-hpux-tdep.c: Ditto. * i386-linux-nat.c: Ditto. * linux-nat.c: Ditto. * nbsd-nat.c: Ditto. * nbsd-nat.h: Ditto. * ppc-linux-tdep.c: Ditto. * serial.c: Ditto. * ui-file.h: Ditto. * tui/tui-winsource.c: Ditto. 2011-02-26 Michael Snyder * breakpoint.c (reattach_breakpoints): Avoid resource leak (ui_file). * maint.c (maintenance_do_deprecate): Plug a memory leak. * dwarf2loc.c (insert_bits): Avoid shadowing a function param with a local variable of the same name. * i387-tdep.c (i387_supply_fxsave): Avoid shadowing a function param with a local variable of the same name. (i387_supply_xsave): Ditto. * linux-low.c (linux_nat_xfer_osdata): Rename local variable so that it does not shadow a function parameter. * i386-nat.c (i386_length_and_rw_bits): Document that case statement is meant to fall through. * expprint.c (dump_subexp_body_standard): Document that case statement is meant to fall through. * amd64-linux-tdep.c (amd64_linux_syscall_record): Delete dead if statement. Condition can't be false. 2011-02-25 Michael Snyder * arm-tdep.c: Fix typos in comments. * bsd-uthread.c: Ditto. * completer.c: Ditto. * corelow.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * cris-tdep.c: Ditto. * dbxread.c: Ditto. * dwarf2read.c: Ditto. * frame.h: Ditto. * gdbtypes.h: Ditto. * inferior.h: Ditto. * mdebugread.c: Ditto. * mips-tdep.c: Ditto. * ppc-linux-nat.c: Ditto. * ppc-linux-tdep.c: Ditto. * printcmd.c: Ditto. * sol-thread.c: Ditto. * solib-frv.c: Ditto. * solist.h: Ditto. * sparc64-tdep.c: Ditto. * spu-tdep.c: Ditto. * stabsread.c: Ditto. * symfile.c: Ditto. * valops.c: Ditto. * varobj.c: Ditto. * vax-nat.c: Ditto. * python/py-block.c: Ditto. * python/py-symbol.c: Ditto. * python/py-symtab.c: Ditto. * python/py-value.c: Ditto. * tui/tui-win.c: Ditto. 2011-02-25 Michael Snyder * inferior.c (print_inferior): Accept a string instead of an int for requested_inferiors, and use get_number_or_range to parse it. (info_inferiors_command): Pass args string to print_inferior. (initialize_inferiors): Change help string for info inferiors. * inferior.h (print_inferior): Export prototype change. 2011-02-25 Tom Tromey * common/ax.def (invalid2): Set to 0x31. 2011-02-25 Jan Kratochvil * dwarf2loc.c (disassemble_dwarf_expression) : Use L and plongest. (disassemble_dwarf_expression) : Drop variable offset, use L and plongest. (disassemble_dwarf_expression) : Use L and plongest. 2011-02-24 Michael Snyder * Makefile.in (clean): Make clean should remove generated files observer.h and observer.inc. 2011-02-24 Joel Brobecker Revert the following patch (not approved yet): 2011-02-21 Hui Zhu * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h. * ax-gdb.c (gen_printf_expr_callback): New function. * ax-gdb.h (gen_printf_expr_callback): Forward declare. * ax-general.c (ax_memcpy): New function. (ax_print): Handle "printf". (ax_reqs): Ditto. * ax.h (ax_memcpy): Forward declare. * common/ax.def (invalid2): Removed. (printf): New entry. * printcmd.c (printcmd.h): New include. (string_printf): New function. (ui_printf): Removed. (printf_command): Remove static. Call string_printf. (eval_command): Call string_printf. * printcmd.h: New file. * tracepoint.c (validate_actionline, encode_actions_1): handle printf_command. 2011-02-23 Tom Tromey * ax-general.c (ax_pick): Add missing newline. 2011-02-23 Michael Snyder * breakpoint.c (breakpoint_1): Change first argument from an int to a char pointer, so that the function now accepts a list of breakpoints rather than just one. Use new function 'number_is_in_list' to implement. (breakpoints_info): Pass char * instead of int to breakpoint_1. (watchpoints_info): Ditto. (tracepoints_info): Ditto. (maintenance_info_breakpoints): Ditto. (_initialize_breakpoint): Update help strings to reflect the fact that these functions can now take more than one argument. * cli/cli-utils.c (number_is_in_list): New function. * cli/cli-utils.h (number_is_in_list): Export. 2011-02-23 Michael Snyder * memattr.c (mem_enable_command): Use get_number_or_range. (mem_disable_command): Ditto. (mem_delete_command): Ditto. (_initialize_mem): Tweak usage message to reflect multiple arguments. 2011-02-22 Doug Evans Add gdb.lookup_global_symbol python function. * NEWS: Add entry. * python/py-symbol.c (gdbpy_lookup_global_symbol): New function. * python/python-internal.h (gdbpy_lookup_global_symbol): Declare it. * python/python.c (GdbMethods): Add entry for lookup_global_symbol. 2011-02-22 Tom Tromey * language.c (language_class_name_from_physname): Rename 'curr_language' argument to 'lang'; use in body. 2011-02-22 Michael Snyder * cli/cli-utils.c (number_is_in_list): Check for zero return. 2011-02-22 Pedro Alves * frame-unwind.h: Fix comment to mention the this frame, not the next. 2011-02-22 Tom Tromey * symfile.c (auto_solib_limit): Remove. * symfile.h (auto_solib_limit): Remove. 2011-02-22 Joel Brobecker * Makefile.in (INSTALLED_LIBS): Delete. Update comment. 2011-02-21 Michael Snyder * gdbthread.h (print_thread_info): Change prototype. * thread.c (print_thread_info): Accept char* instead of int for requested_threads argument. Use new function number_is_in_list to determine which threads to list. (info_threads_command): Pass char* to print_thread_info. * cli/cli-utils.c (number_is_in_list): New function. * cli/cli-utils.h (number_is_in_list): Export. * mi/mi-main.c (mi_cmd_thread_info): Pass char* to print_thread_info. (print_one_inferior): Ditto. (mi_cmd_list_thread_groups): Ditto. 2011-02-21 Jan Kratochvil * common/Makefile.in (CFLAGS): New. (COMPILE): Add $(CFLAGS). 2011-02-21 Tom Tromey * breakpoint.c (catch_syscall_command_1): Fix typo. 2011-02-21 Tom Tromey * reverse.c: Include cli-utils.h. * printcmd.c: Include cli-utils.h. (string_printf): Use skip_spaces. * cli/cli-utils.h: New file. * cli/cli-utils.c: New file. * cli/cli-dump.h (skip_spaces): Move to cli-utils.h. * cli/cli-dump.c (skip_spaces): Move to cli-utils.c. * breakpoint.h (get_number, get_number_or_range): Move to cli-utils.h. * breakpoint.c: Include cli-utils.h. (get_number_trailer, get_number, get_number_or_range) (ep_skip_leading_whitespace): Move to cli-utils.c. (create_breakpoint_sal, find_condition_and_thread) (decode_static_tracepoint_spec, watch_command_1) (watch_maybe_just_location, ep_parse_optional_if_clause) (catch_fork_command_1, catch_exec_command_1) (catch_syscall_command_1): Use skip_spaces, skip_to_space. * Makefile.in (SUBDIR_CLI_OBS): Add cli-utils.o. (SUBDIR_CLI_SRCS): Add cli-utils.c. (HFILES_NO_SRCDIR): Add cli-utils.h. (cli-utils.o): New target. 2011-02-18 Pierre Muller * remote.c (remote_close): Reset INFERIOR_PTID to NULL_PTID before calling discard_all_inferiors. 2011-02-21 Ulrich Weigand * opencl-lang.c (STRUCT_OCL_TYPE): Remove. (struct builtin_opencl_type): Remove. (builtin_opencl_type): Change return type to "struct type **". (lookup_opencl_vector_type): Update caller. (opencl_language_arch_info): Copy primitive type vector from gdbarch. (build_opencl_types): Install plain array of "struct type *" instead of "struct builtin_opencl_type". 2011-02-21 Matthew Gretton-Dann Ulrich Weigand * arm-linux-nat.c: Include "observer.h" and "gdbthread.h". (PTRACE_GETHBPREGS, PTRACE_SETHBPREGS): Define. (struct arm_linux_hwbp_cap): New type. (arm_linux_get_hwbp_cap): New function. (arm_linux_get_hw_breakpoint_count): Likewise. (arm_linux_get_hw_watchpoint_count): Likewise. (arm_linux_can_use_hw_breakpoint): Likewise. (arm_hwbp_type): New type. (arm_hwbp_control_t): Likewise. (struct arm_linux_hw_breakpoint): Likewise. (struct arm_linux_thread_points): Likewise. (arm_threads): New global variable. (arm_linux_find_breakpoints_by_tid): New function. (arm_hwbp_control_initialize): Likewise. (arm_hwbp_control_is_enabled): Likewise. (arm_hwbp_control_disable): Likewise. (arm_linux_hw_breakpoint_initialize): Likewise. (arm_linux_get_hwbp_type): Likewise. (arm_linux_hw_watchpoint_initialize): Likewise. (arm_linux_hw_breakpoint_equal): Likewise. (arm_linux_insert_hw_breakpoint1): Likewise. (arm_linux_remove_hw_breakpoint1): Likewise. (arm_linux_insert_hw_breakpoint): Likewise. (arm_linux_remove_hw_breakpoint): Likewise. (arm_linux_region_ok_for_hw_watchpoint): Likewise. (arm_linux_insert_watchpoint): Likewise. (arm_linux_remove_watchpoint): Likewise. (arm_linux_stopped_data_address): Likewise. (arm_linux_stopped_by_watchpoint): Likewise. (arm_linux_watchpoint_addr_within_range): Likewise. (arm_linux_new_thread): Likewise. (arm_linux_thread_exit): Likewise. (_initialize_arm_linux_nat): Install hardware breakpoint/watchpoint related target callbacks. Register arm_linux_new_thread and arm_linux_thread_exit. * arm-tdep.h (arm_pc_is_thumb): Add prototype. * arm-tdep.c (arm_pc_is_thumb): Make global. (arm_gdbarch_init): Call set_gdbarch_have_nonsteppable_watchpoint. 2011-02-21 Ulrich Weigand * breakpoint.c (update_watchpoint): Do not attempt to recreate per-frame locations while within a function epilogue. 2011-02-21 Pierre Muller * ser-mingw.c (ser_windows_close): Reformat comment to better conform to GNU coding standards. 2011-02-21 Pierre Muller Allow use of mingw native on Windows 95 OS. * ser-mingw.c (CancelIo): New macro for dynamically loaded DLL entry. (ser_windows_close): Only call CancelIo if function exists. (_initialize_ser_windows): Use LoadLirary/GetProcAddress to check for existence of CancelIo function in kernel32 DLL. 2011-02-21 Hui Zhu * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h. * ax-gdb.c (gen_printf_expr_callback): New function. * ax-gdb.h (gen_printf_expr_callback): Forward declare. * ax-general.c (ax_memcpy): New function. (ax_print): Handle "printf". (ax_reqs): Ditto. * ax.h (ax_memcpy): Forward declare. * common/ax.def (invalid2): Removed. (printf): New entry. * printcmd.c (printcmd.h): New include. (string_printf): New function. (ui_printf): Removed. (printf_command): Remove static. Call string_printf. (eval_command): Call string_printf. * printcmd.h: New file. * tracepoint.c (validate_actionline, encode_actions_1): handle printf_command. 2011-02-19 Michael Snyder * reverse.c (delete_one_bookmark): Argument is now bookmark id rather than pointer to bookmark struct. (delete_bookmark_command): Use get_number_or_range. (goto_bookmark_command): Parse with get_number instead of strtoul. (bookmark_1): New function. Print info for one bookmark. (bookmarks_info): Use get_number_or_range and bookmark_1. 2011-02-18 Michael Snyder * thread.c (info_threads_command): Re-implement using get_number_or_range. (thread_apply_command): Ditto. 2011-02-18 Tom Tromey * common/ax.def: New file. * ax.h (enum agent_op): Use ax.def. * ax-general.c (aop_map): Use ax.def. 2011-02-18 Tom Tromey * ax-general.c (aop_map): Add pick and rot. * dwarf2loc.c (compile_dwarf_to_ax) : Reimplement. : Implement. * ax.h (enum agent_op) : New constants. (ax_pick): Declare. * ax-general.c (ax_pick): New function. 2011-02-18 Tom Tromey * Makefile.in (HFILES_NO_SRCDIR): Don't mention ada-operator.inc. 2011-02-18 Jan Kratochvil Tom Tromey * cp-support.c (make_symbol_overload_list_namespace): Do not call make_symbol_overload_list_block with NULL BLOCK. * valarith.c (unop_user_defined_p): Resolve also TYPE_CODE_TYPEDEF. 2011-02-18 Pedro Alves * breakpoint.c (get_number_trailer): No longer accept a NULL PP. * breakpoint.h (get_number_or_range): Declare. * printcmd.c (ALL_DISPLAYS): Declare. (delete_display): Reimplement taking a display pointer. (undisplay_command): Accept a range of displays to delete, using get_number_or_range. 2011-02-18 Pierre Muller * c-valprint.c (c_val_print): Add embedded_offset to address for arrays of unspecified length. * p-valprint.c (pascal_val_print): Likewise. 2011-02-18 Yao Qi * gdb/arm-tdep.c (arm_displaced_step_copy_insn): Move code to ... (arm_process_displaced_insn): .. here. Remove parameter INSN. (thumb_process_displaced_insn): New. * gdb/arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Update call to arm_process_displaced_insn. * gdb/arm-tdep.h : Update declaration of arm_process_displaced_insn. 2011-02-17 Tom Tromey * dwarf2loc.h (dwarf2_compile_expr_to_ax): Declare. * dwarf2loc.c (dwarf2_compile_expr_to_ax): Rename from compile_dwarf_to_ax. No longer static. Call dwarf2_compile_cfa_to_ax. (locexpr_tracepoint_var_ref): Update. (loclist_tracepoint_var_ref): Update. * dwarf2-frame.h (dwarf2_compile_cfa_to_ax): Declare. * dwarf2-frame.c (execute_cfa_program): Remove 'this_frame' argument; add 'gdbarch' and 'pc'. (dwarf2_compile_cfa_to_ax): New function. (dwarf2_frame_cache): Update. 2011-02-17 Joel Brobecker * ada-lang.c (ada_type_of_array): Fix the size of the array in the case of an unconstrained packed array. 2011-02-17 Yao Qi * common/Makefile.in: Add more targets for make. 2011-02-16 Tom Tromey * dwarf2loc.c (unimplemented): Fix typo. 2011-02-16 Tom Tromey * dwarf2loc.c (unimplemented): Handle unnamed opcodes. (compile_dwarf_to_ax) : Use unimplemented. : Update. (disassemble_dwarf_expression): Update. * dwarf2read.c (dwarf_stack_op_name): Remove 'def' argument. (decode_locdesc): Update. * dwarf2expr.h (dwarf_stack_op_name): Update. 2011-02-16 Tom Tromey * ax.h (struct aop_map) : Now const. 2011-02-16 Tom Tromey * ax-gdb.c.c (gen_expr) : Handle value kinds other than axs_rvalue. 2011-02-16 Yao Qi * infrun.c (get_displaced_step_closure_by_addr): New. * inferior.h: Declare it. * arm-tdep.c: (arm_pc_is_thumb): Call get_displaced_step_closure_by_addr. Adjust MEMADDR if it returns non-NULL. 2011-02-16 Pedro Alves Jan Kratochvil gdb/ * tracepoint.c (memrange_sortmerge): Fix list A's end calculation. 2011-02-16 Pedro Alves Jan Kratochvil * value.c (value_contents_copy_raw): Extend describing comment. Assert that the destination contents we're overwriting are wholly available. (value_contents_copy): Extend describing comment. 2011-02-16 Pedro Alves Jan Kratochvil * value.c (value_available_contents_eq): Remove redundant local variables. Fix available contents comparision. * value.h (value_available_contents_eq): Extend describing comment. 2011-02-16 Yao Qi * thread.c (info_threads_command): Add missing i18n markup and remove trailing newline. 2011-02-15 Paul Pluzhnikov * breakpoint.c (longjmp_names): New variable. (struct breakpoint_objfile_data): New type. (breakpoint_objfile_key): New variable. (msym_not_found): New variable. (msym_not_found_p): New predicate. (get_breakpoint_objfile_data): New function. (create_overlay_event_breakpoint): Check per-objfile cache for symbols first. (create_longjmp_master_breakpoint): Likewise. (create_std_terminate_master_breakpoint): Likewise. (create_exception_master_breakpoint): Likewise. (_initialize_breakpoint): Register per-objfile data key. 2011-02-15 Paul Pluzhnikov * breakpoint.c ((create_overlay_event_breakpoint): Const-propagate parameter value. (create_longjmp_master_breakpoint): Loop over longjmp names. (create_std_terminate_master_breakpoint): Const-propagate parameter value. (update_breakpoints_after_exec): Adjust. (breakpoint_re_set): Adjust. 2011-02-15 Michael Snyder * thread.c (info_threads_command): Process arg as thread id, or list of thread ids. (thread_find_command): New command. (_initialize_thread): Document argument for info threads. Document 'thread find' command. * NEWS: Document new command "thread find". 2011-02-15 Jan Kratochvil * Makefile.in (ACLOCAL_AMFLAGS): Add `-I ../config'. * aclocal.m4: Regenerated with aclocal-1.11.1. * common/configure: Regenerate with autoconf-2.64. 2011-02-15 Ken Werner * opencl-lang.c (build_opencl_types): Set the size of the built-in bool data type to a size of one byte. 2011-02-15 Pedro Alves Jan Kratochvil * target.c (memory_xfer_live_readonly_partial): Document where to look for interface description. 2011-02-15 Yao Qi PR tdep/12352 * arm-tdep.c (copy_ldr_str_ldrb_strb): Replace PC with SP in order to store PC value on stack instead of text section. 2011-02-15 Thiago Jung Bauermann * rs6000-tdep.c (IS_EFP_PSEUDOREG): Use correct constant for the EFP register set size. (efpr_pseudo_register_read): Use regcache_raw_read_part to read data from the VMX register. (efpr_pseudo_register_write): Use regcache_raw_write_part to read and write data from/to the VMX register. 2011-02-14 Michael Snyder * command.h (enum command_class): New class 'no_set_class', for "show" commands without a corresponding "set" command. * value.c (_initialize_values): Use 'no_set_class' for "show values". * copying.c (_initialize_copying): Ditto for "show copying" and "show warranty". * cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and "show version". * cli/cli-setshow.c (cmd_show_list): Skip "show" commands for which there is no corresponding "set" command (eg. "show copying"). 2011-02-14 Pedro Alves Jan Kratochvil * exec.c (section_table_available_memory): Change `len' parameter type to ULONGEST. * exec.h (section_table_available_memory): Ditto. * value.h (read_value_memory): Rename the `offset' parameter to `embedded_offset'. 2011-02-14 Pedro Alves Jan Kratochvil * memrange.c (compare_mem_ranges): Mention sort order in describing comment. (normalize_mem_ranges): Add comment. Fix ra->length calculation. * tracepoint.c (traceframe_available_memory): Extend comment to mention what happens to RESULT when the target does not support the query. 2011-02-14 Pedro Alves Jan Kratochvil * value.c (mark_value_bytes_unavailable): Fix indexing the `bef' range. 2011-02-14 Pedro Alves * value.c (value_bits_valid, value_bits_synthetic_pointer): No longer handle NULL values. 2011-02-14 Pedro Alves * exceptions.h (NOT_AVAILABLE_ERROR): New error. * value.c: Include "exceptions.h". (require_available): Throw NOT_AVAILABLE_ERROR instead of a generic error. * cp-abi.c: Include gdb_assert.h. (baseclass_offset): Add `embedded_offset' and `val' parameters. Assert the method is implemented. Wrap NOT_AVAILABLE_ERROR errors. * cp-abi.h (baseclass_offset): Add `embedded_offset' and `val' parameters. No longer returns -1 on error. (struct cp_abi_ops) : Add `embedded_offset' and `val' parameters. * cp-valprint.c: Include exceptions.h. (cp_print_value): Handle NOT_AVAILABLE_ERROR errors when fetching the baseclass_offset. Handle unavailable base classes. Use val_print_invalid_address. * p-valprint.c: Include exceptions.h. (pascal_object_print_value): Handle NOT_AVAILABLE_ERROR errors when fetching the baseclass_offset. No longer expect baseclass_offset returning -1. Handle unavailable base classes. Use val_print_invalid_address. * valops.c (dynamic_cast_check_1): Rename `contents' parameter to `valaddr' parameter, and change its type to gdb_byte pointer. Add `embedded_offset' and `val' parameters. Adjust. (dynamic_cast_check_2): Rename `contents' parameter to `valaddr' parameter, and change its type to gdb_byte pointer. Add `embedded_offset' and `val' parameters. Adjust. No longer expect baseclass_offset returning -1. (value_dynamic_cast): Use value_contents_for_printing rather than value_contents. Adjust. (search_struct_field): No longer expect baseclass_offset returning -1. (search_struct_method): If reading memory from the target is necessary, wrap it in a new value to pass to baseclass_offset. No longer expect baseclass_offset returning -1. (find_method_list): No longer expect baseclass_offset returning -1. Use value_contents_for_printing rather than value_contents. * valprint.c (val_print_invalid_address): New function. * valprint.h (val_print_invalid_address): Declare. * gdbtypes.c (is_unique_ancestor_worker): New `embedded_offset' and `val' parameters. No longer expect baseclass_offset returning -1. Adjust. * gnu-v2-abi.c: Include "exceptions.h". (gnuv2_baseclass_offset): Add `embedded_offset' and `val' parameters. Handle unavailable memory. Recurse through gnuv2_baseclass_offset directly, rather than through baseclass_offset. No longer returns -1 on not found, instead throw an error. * gnu-v3-abi.c (gnuv3_baseclass_offset): Add `embedded_offset' and `val' parameters. Adjust. 2011-02-14 Pedro Alves * tracepoint.c (memrange_sortmerge): Don't merge ranges that are almost but not quite adjacent. 2011-02-14 Pedro Alves * value.h (value_entirely_available): Declare. * value.c (value_entirely_available): New function. * c-valprint.c (c_value_print): Don't try fetching the pointer's real type if the pointer is unavailable. 2011-02-14 Pedro Alves * valops.c (value_repeat): Use read_value_memory instead of read_memory. 2011-02-14 Pedro Alves * value.h (value_contents_copy, value_contents_copy_raw): Declare. * value.c (value_contents_copy_raw, value_contents_copy): New functions. (value_primitive_field): Use value_contents_copy_raw instead of memcpy. * valops.c (value_fetch_lazy): Use value_contents_copy instead of memcpy. (value_array, value_slice): Ditto. * valarith.c (value_subscripted_rvalue): Use value_contents_copy_raw instead of memcpy. 2011-02-14 Pedro Alves references. * valops.c (get_value_at): Use value_from_contents_and_address, avoiding read_memory. 2011-02-14 Pedro Alves * c-valprint.c (c_val_print): Print a string with unavailable contents as an array. 2011-02-14 Pedro Alves * value.h (unpack_bits_as_long): Delete declaration. (unpack_value_bits_as_long): Declare. (unpack_value_field_as_long): Declare. (value_field_bitfield): Declare. * value.c (unpack_bits_as_long): Rename to... (unpack_value_bits_as_long_1): ... this. Add embedded_offset and value parameters. Return the extracted result in a new output parameter. If the value contents are unavailable, return false, otherwise return true. (unpack_value_bits_as_long): New. (unpack_field_as_long): Rename to... (unpack_value_field_as_long_1): ... this. Add embedded_offset and Add embedded_offset and value parameters. Return the extracted result in a new output parameter. If the value contents are unavailable, return false, otherwise return true. (unpack_value_field_as_long): New. (unpack_field_as_long_1): New. (unpack_field_as_long): Reimplement as wrapper around unpack_value_field_as_long_1. (value_field_bitfield): New function. * valops.c (value_fetch_lazy): When fetching a bitfield, use unpack_value_bits_as_long. Mark the value as unavailable, if it is unavailable. * jv-valprint.c (java_print_value_fields): Use value_field_bitfield. * p-valprint.c (pascal_object_print_value_fields): Use value_field_bitfield. * cp-valprint.c (cp_print_value_fields): Use value_field_bitfield. 2011-02-14 Pedro Alves * value.c (get_internalvar_integer): Also return the int value of TYPE_CODE_INT INTERNALVAR_VALUE values. (set_internalvar): Don't special case TYPE_CODE_INT. 2011-02-14 Pedro Alves * value.c (struct internalvar) : Remove INTERNALVAR_POINTER. : Delete. (value_of_internalvar): Remove INTERNALVAR_POINTER handling. (set_internalvar): Remove special TYPE_CODE_PTR handling. (preserve_one_internalvar): Remove INTERNALVAR_POINTER handling. 2011-02-14 Pedro Alves * value.h (value_available_contents_eq): Declare. * value.c (find_first_range_overlap): New function. (value_available_contents_eq): New function. * valprint.c (val_print_array_elements): Use value_available_contents_eq. * ada-valprint.c (val_print_packed_array_elements): Use value_available_contents_eq. * jv-valprint.c (java_value_print): Use value_available_contents_eq. 2011-02-14 Pedro Alves * target.c (target_read_live_memory): New function. (memory_xfer_live_readonly_partial): New. (memory_xfer_partial): If reading from a traceframe, fallback to reading unavailable read-only memory from read-only regions of live target memory. * tracepoint.c (disconnect_tracing): Adjust. (set_current_traceframe): New, factored out from set_traceframe_number. (set_traceframe_number): Reimplement to only change the traceframe number on the GDB side. (do_restore_current_traceframe_cleanup): Adjust. (make_cleanup_restore_traceframe_number): New. (cur_traceframe_number): New global. (tfile_open): Set cur_traceframe_number to no traceframe. (set_tfile_traceframe): New function. (tfile_trace_find): If looking up a traceframe using any method other than by number, make sure the current tfile traceframe matches gdb's current traceframe. Update the current tfile traceframe if the lookup succeeded. (tfile_fetch_registers, tfile_xfer_partial) (tfile_get_trace_state_variable_value): Make sure the remote traceframe matches gdb's current traceframe. * remote.c (remote_traceframe_number): New global. (remote_open_1): Set it to -1. (set_remote_traceframe): New function. (remote_fetch_registers, remote_store_registers) (remote_xfer_memory, remote_xfer_partial) (remote_get_trace_state_variable_value): Make sure the remote traceframe matches gdb's current traceframe. (remote_trace_find): If looking up a traceframe using any method other than by number, make sure the current remote traceframe matches gdb's current traceframe. Update the current remote traceframe if the lookup succeeded. * infrun.c (fetch_inferior_event): Adjust. * tracepoint.h (set_current_traceframe): Declare. (get_traceframe_number, set_traceframe_number): Add describing comments. 2011-02-14 Pedro Alves Mark pieces of values as unavailable if the corresponding memory is unavailable. * valops.c: Include tracepoint.h. (value_fetch_lazy): Use read_value_memory. (read_value_memory): New. * value.h (read_value_memory): Declare. * dwarf2loc.c (read_pieced_value): Use read_value_memory. * exec.c (section_table_available_memory): New function. * exec.h (section_table_available_memory): Declare. 2011-02-14 Pedro Alves * Makefile.in (SFILES): Add memrange.c. (HFILES_NO_SRCDIR): Add memrange.h. (COMMON_OBS): Add memrange.o. * memrange.c: New file. * memrange.h: New file. * tracepoint.c: Include memrange.h. (struct mem_range): Delete. (mem_range_s): Delete. (traceframe_available_memory): New function. * tracepoint.h (traceframe_available_memory): Declare. 2011-02-14 Pedro Alves * target.h (struct traceframe_info): Forward declare. (enum target_object): Add TARGET_OBJECT_TRACEFRAME_INFO. (struct target_ops) : New field. (target_traceframe_info): New. * target.c (update_current_target): Inherit and default to_traceframe_info. * remote.c (PACKET_qXfer_traceframe_info): New. (remote_protocol_features): Register qXfer:traceframe-info:read. (remote_xfer_partial): Handle TARGET_OBJECT_TRACEFRAME_INFO. (remote_traceframe_info): New. (init_remote_ops): Install it. (_initialize_remote): Install "set/show remote traceframe-info" commands. * tracepoint.h (parse_traceframe_info): Declare. * tracepoint.c (struct mem_range): New. (mem_range_s): New typedef. (struct traceframe_info): New. (traceframe_info): New global. (free_traceframe_info): New function. (clear_traceframe_info): New function. (start_tracing, tfind_1, set_traceframe_number): Clear traceframe info. (build_traceframe_info): New function. (tfile_traceframe_info): New function. (init_tfile_ops): Install tfile_traceframe_info. (traceframe_info_start_memory, free_result): New functions. (memory_attributes, traceframe_info_elements): New globals. (parse_traceframe_info, get_traceframe_info): New functions. * features/traceframe-info.dtd: New file. * Makefile.in (XMLFILES): Add traceframe-info.dtd. 2011-02-14 Pedro Alves Base support for value contents. * value.h (value_bytes_available): Declare. (mark_value_bytes_unavailable): Declare. * value.c (struct range): New struct. (range_s): New typedef. (ranges_overlap): New function. (range_lessthan): New function. (ranges_contain_p): New function. (struct value) : New field. (value_bytes_available): New function. (mark_value_bytes_unavailable): New function. (require_not_optimized_out): Constify parameter. (require_available): New function. (value_contents_all, value_contents): Require all bytes be available. (value_free): Free `unavailable'. (value_copy): Copy `unavailable'. * valprint.h (val_print_unavailable): Declare. * valprint.c (valprint_check_validity): Rename `offset' parameter to `embedded_offset'. If printing a scalar, check whether the value chunk is available. (val_print_unavailable): New. (val_print_scalar_formatted): Check whether the value is available. * python/py-prettyprint.c (apply_val_pretty_printer): Refuse pretty-printing unavailable values. 2011-02-13 Jan Kratochvil Fix const/volatile qualifiers of C++ types, PR c++/12328. * c-typeprint.c (c_type_print_args): Update the function comment. New variable param_type, initialize it. Remove const/volatile qualifiers for language_cplus and !show_artificial. Use param_type. 2011-02-13 Jan Kratochvil * symtab.c (find_pc_sect_line): New variable objfile, initialize it from S. Iterate S using ALL_OBJFILE_SYMTABS. Verify BV for each S. * symtab.h (struct symtab) : Comment extension. 2011-02-12 Yao Qi * Makefile.in (CLEANDIRS): Remove duplicated common dir. 2011-02-11 Yao Qi * common/Makefile.in: Add copyright header. 2011-02-11 Pedro Alves * infrun.c (proceed): Move switching out and in of tfind mode from here ... (fetch_inferior_event): ... to here. 2011-02-11 Yao Qi * Makefile.in: Remove signals.o from COMMON_OBS. Link libcommon.a. * configure.ac: Add common to sub dir. * configure: Regenerate. 2011-02-11 Yao Qi Build libcommon.a. * common/Makefile.in: New. * common/configure.ac: New. * common/aclocal.m4: New. * common/configure: Generate. 2011-02-10 Pedro Alves * vec.h (VEC_block_remove): Place VEC_ASSERT_INFO on the right side of the parenthesis. Merge from GCC: 2010-07-13 Jakub Jelinek * vec.h (VEC_block_remove): Fix comment. 2011-02-08 Michael Snyder * linux-nat.c (linux_nat_filter_event): Fix typo in comment. 2011-02-08 Jan Kratochvil * i386-tdep.c (i386_process_record): Rename l suffixes to d suffixes in comments for pcmpgtd, pcmpeqd, psubd, paddd, pcmpgtd, pcmpeqd, psubd and paddd. 2011-02-08 Jan Kratochvil PR 12361. * i386-tdep.c (i386_process_record) <0x660f3807>: Fix the comment to phsubsw. (i386_process_record) : Fix the opcode to 0xf20ff0. (i386_process_record) <0x0f3807>: Fix the comment to phsubsw. 2011-02-08 Ulrich Weigand * dwarf2read.c (read_subroutine_type): Set special calling convention flag for functions compiled by IBM XL C for OpenCL. * ppc-sysv-tdep.c: Include "dwarf2.h" (ppc_sysv_abi_push_dummy_call): Implement IBM OpenCL vector types calling convention. (do_ppc_sysv_return_value): Add FUNC_TYPE argument. Implement IBM OpenCL vector types calling convention. (ppc_sysv_abi_return_value): Pass through FUNC_TYPE. (ppc_sysv_abi_broken_return_value): Likewise. (ppc64_sysv_abi_push_dummy_call): Implement IBM OpenCL vector types calling convention. (ppc64_sysv_abi_return_value): Likewise. * spu-tdep.c: Include "dwarf2.h" (spu_return_value): Implement IBM OpenCL vector types calling convention. 2011-02-08 Ulrich Weigand * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement correct ABI for AltiVec vector arguments. 2011-02-07 Pedro Alves * valprint.c (val_print): Extend comment. * ada-valprint.c (ada_valprint): Rewrite comment deferring interface explanation to val_print. (ada_val_print_array): Adjust comment to current interface. (print_field_values): Adjust comment to current interface. * c-valprint.c (c_val_print): Rewrite comment deferring interface explanation to val_print. * f-valprint.c (f_val_print): Ditto. * jv-valprint.c (java_val_print): Ditto. * m2-valprint.c (m2_val_print): Ditto. * p-valprint.c (pascal_val_print): Ditto. 2011-02-07 Thiago Jung Bauermann * breakpoint.c (parse_breakpoint_sals): Fix description. 2011-02-04 Sami Wagiaalla Oguz Kayral * python/py-inferior.c (python_on_normal_stop): New function. (python_on_resume): New function. (python_inferior_exit): New function. (gdbpy_initialize_inferior): Add normal_stop, target_resumed, and inferior_exit observers. * python/py-evtregistry.c: New file. * python/py-threadevent.c : New file. * python/py-event.c: New file. * python/py-evts.c: New file. * python/py-continueevent.c: New file. * python/py-bpevent.c: New file. * python/py-signalevent.c: New file. * python/py-exetiedevent.c: New file. * python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function. Move struct breakpoint_object from here... * python/python-internal.h: ... to here. * python/py-event.h: New file. * python/py-events.h: New file. * Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o, py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o, py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o. (SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c, py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c, py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c. Add build rules for all the above. 2011-02-04 Tom Tromey * dwarf2read.c (dwarf2_section_empty_p): New function. (dwarf2_read_section): Use dwarf2_section_empty_p. (dwarf2_section_size): New function. (dwarf2_get_section_info): Unconditionally read section. (dwarf2_read_index): Use dwarf2_section_empty_p. (partial_read_comp_unit_head): Use dwarf2_section_size. (dwarf2_symbol_mark_computed): Likewise. 2011-02-04 David Daney * NEWS: Add item for "catch syscall" on mips*-linux* targets. 2011-02-04 David Daney * mips-linux-tdep.c: Include xml-syscall.h. (mips_linux_get_syscall_number): New function. (mips_linux_init_abi): Add calls to mips_linux_get_syscall_number() and set_xml_syscall_file_name(). * data-directory/Makefile.in (SYSCALLS_FILES): Add mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml * syscalls/mips-n32-linux.xml: New file. * syscalls/mips-n64-linux.xml: New file. * syscalls/mips-o32-linux.xml: New file. 2011-02-04 Ulrich Weigand * dwarf2read.c (dwarf2_ranges_read): Skip empty range entries. Complain about inverted range entries. (dwarf2_record_block_ranges): Likewise. 2011-02-04 Thiago Jung Bauermann Fix some typos. * breakpoint.c (update_watchpoint): Fix name of the update_global_location_list function. (print_one_breakpoint): Fix typo. (_initialize_breakpoint): Remove extra space in hbreak help string. * breakpoint.h (struct bp_location) : Fix field description. 2011-02-04 Pedro Alves * regcache.c (registers_changed_ptid): Don't explictly always clear `current_regcache'. Only clear current_thread_ptid and current_thread_arch when PTID matches. Only reinit the frame cache if PTID matches the current inferior_ptid. Move alloca(0) call to ... (registers_changed): ... here. 2011-02-03 Ulrich Weigand * arm-tdep.c (arm_skip_stack_protector): Accept any symbol that starts with __stack_chk_guard as stack guard symbol. 2011-02-03 Andrew Burgess * disasm.c (compare_lines): Handle the end of sequence markers within the line table to better support disassembling over compilation unit boundaries. 2011-02-02 Ulrich Weigand * arm-tdep.c (skip_prologue_function): Add GDBARCH and IS_THUMB arguments. Skip in-prologue calls to glibc __aeabi_read_tp implementation even if no symbols are available. (thumb_analyze_prologue): Update call to skip_prologue_function. (arm_analyze_prologue): Likewise. 2011-02-02 Ulrich Weigand * arm-tdep.c: Include "observer.h". (arm_prologue_this_id): Use frame PC if get_frame_func returns 0. (arm_exidx_data_key): New static variable. (struct arm_exidx_entry, arm_exidx_entry_s): New data types. (struct arm_exidx_data): Likewise. (arm_exidx_data_free): New function. (arm_compare_exidx_entries): Likewise. (arm_obj_section_from_vma): Likewise. (arm_exidx_new_objfile): Likewise. (arm_find_exidx_entry): Likewise. (arm_exidx_fill_cache): Likewise. (arm_exidx_unwind_sniffer): Likewise. (arm_exidx_unwind): New global variable. (arm_gdbarch_init): Append unwinder arm_exidx_unwind. (_initialize_arm_tdep): Attach arm_exidx_new_objfile to new_objfile observer. Register arm_exidx_data_key as objfile data. 2011-02-02 Ulrich Weigand * arm-tdep.c (arm_analyze_load_stack_chk_guard): Avoid build break due to accessing uninitialized variable. Fix indentation. 2011-02-02 Pedro Alves * c-valprint.c (c_value_print): When doing virtual base pointer adjustment, create a new value with adjusted contents rather than changing the contents of the value being printed (and getting it wrong). 2011-02-02 Pedro Alves * xml-support.c (xml_find_attribute): New. (xinclude_start_include): Use it. * xml-support.h (xml_find_attribute): Declare. * memory-map.c (memory_map_start_memory) (memory_map_start_property): Use xml_find_attribute. * osdata.c (osdata_start_osdata, osdata_start_column): Use xml_find_attribute. * remote.c (start_thread): Use xml_find_attribute. * solib-target.c (library_list_start_segment) (library_list_start_section, library_list_start_library) (library_list_start_list): Use xml_find_attribute. * xml-tdesc.c (tdesc_start_target, tdesc_start_feature) (tdesc_start_union, tdesc_start_struct, tdesc_start_flags) (tdesc_start_field): Use xml_find_attribute. 2011-02-02 Ulrich Weigand * opencl-lang.c (STRINGIFY): Rename to OCL_STRING. (BUILD_OCL_VTYPES): Update. 2011-02-02 Joel Brobecker * configure.ac: Work around non-GNU sed limitation when computing python version number. * configure: Regenerate. 2011-02-01 Jan Kratochvil Fix debug printing of TYPE_INSTANCE. * expprint.c (print_subexp_standard) : New. (dump_subexp_body_standard) : New. 2011-02-01 Jan Kratochvil Fix debug printing of BINOP_IN, OP_OBJC_MSGCALL, OP_F77_UNDETERMINED_ARGLIST, OP_COMPLEX, OP_OBJC_SELECTOR, OP_NAME, OP_OBJC_NSSTRING, OP_F90_RANGE and OP_DECFLOAT. * ada-operator.inc: Rename the file to ... * ada-operator.def: ... here, wrap all the entries by macro OP. * expprint.c (op_name_standard): Remove all the entries. Include "std-operator.def" instead. * expression.h (enum exp_opcode): Include "std-operator.def" and "ada-operator.def". Move all the entries ... * std-operator.def: ... here, wrap all the entries by macro OP. 2011-01-31 Paul Pluzhnikov * breakpoint.h (remove_jit_event_breakpoints): New prototype. * breakpoint.c (remove_jit_event_breakpoints): New function. * jit.c (jit_descriptor_addr): Delete. (registering_code): Delete. (clear_int): Delete. (jit_inferior_data): New variable. (struct jit_inferior_data): New type. (get_jit_inferior_data): New function. (jit_inferior_data_cleanup): New function. (jit_read_descriptor): Adjust. (jit_register_code): Adjust. (jit_breakpoint_re_set_internal): New function; move code here ... (jit_inferior_init): ... from here. (jit_breakpoint_re_set): Adjust. (jit_reset_inferior_data_and_breakpoints): New function. (jit_inferior_created_observer): Adjust. (jit_inferior_exit_hook): Adjust. (jit_executable_changed_observer): New function. (jit_event_handler): Adjust. (_initialize_jit): Adjust. 2011-01-31 Michael Snyder * m32r-tdep.c (m32r_gdbarch_init): Replace accidentally deleted line. 2011-01-31 Tom Tromey PR python/12216: * python/python.c (execute_gdb_command): Call prevent_dont_repeat. * top.c (suppress_dont_repeat): New global. (dont_repeat): Use it. (prevent_dont_repeat): New function. * command.h (prevent_dont_repeat): Declare. 2011-01-31 Tom Tromey * infcmd.c (finish_backward): Use breakpoint_set_silent. * python/py-breakpoint.c (bppy_set_silent): Use breakpoint_set_silent. (bppy_set_thread): Use breakpoint_set_thread. (bppy_set_task): Use breakpoint_set_task. * breakpoint.h (breakpoint_set_silent, breakpoint_set_thread) (breakpoint_set_task): Declare. (make_breakpoint_silent): Remove. * breakpoint.c (breakpoint_set_silent): New function. (breakpoint_set_thread): Likewise. (breakpoint_set_task): Likewise. (make_breakpoint_silent): Remove. 2011-01-31 Tom Tromey * breakpoint.h (user_breakpoint_p): Declare. * breakpoint.c (user_breakpoint_p): New function. (breakpoint_1): Use it. (save_breakpoints): Likewise. 2011-01-31 Joel Brobecker * configure.ac: Add handling of Python distribution on Windows. * python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED sysconfig variables are not defined, then do not use them. On Windows, if LIBPL is not defined, then use prefix + '/libs' instead. On Windows, return all paths using forward-slashes rather than backslashes. 2011-01-31 Joel Brobecker * configure.ac: Remove fallback behavior for building against Python. Remove tweaking of Python include path. Add PYTHON_CPPFLAGS and PYTHON_LIBS substitution. (AC_TRY_LIBPYTHON): Adjust program used in linking test. If link is successful, set PYTHON_CPPFLAGS and PYTHON_LIBS. Always restore CPPFLAGS and LIBS after linking test. * configure: Regenerated. * Makefile.in (INTERNAL_CPPFLAGS): Add @PYTHON_CPPFLAGS@. (INSTALLED_LIBS, CLIBS): Add @PYTHON_LIBS@. * python/python-internal.h: Adjust includes of Python .h files. 2011-01-31 Joel Brobecker * tracepoint.c (traceframe_walk_blocks): Add missing i18n markup in error message. 2011-01-31 Joel Brobecker * inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode value test. 2011-01-31 Yao Qi * arm-linux-nat.c: Update calls to regcache_register_status instead of regcache_valid_p. * aix-thread.c: Likewise. * i386gnu-nat.c: Likewise. 2011-01-29 Jan Kratochvil Fix crash. * valops.c (compare_parameters): Verify TYPE_NFIELDS before touching TYPE_FIELD_ARTIFICIAL. 2011-01-28 Richard Earnshaw * MAINTAINERS: Move myself from Responsible Maintainers to Authorized Committers. 2011-01-28 Pedro Alves * tracepoint.c (tfile_xfer_partial): If there's no traceframe selected, don't try iterating over the traceframe's blocks. (tfile_has_stack): If there's no traceframe selected, then there's no stack. (tfile_has_registers): If there's no traceframe selected, then there's no registers. 2011-01-28 Pedro Alves * target.c (memory_xfer_partial): No need to restore shadows if we haven't read anything. 2011-01-28 Pedro Alves * mips-tdep.c (mips_print_register): Use get_frame_register_value and val_print_scalar_formatted. 2011-01-27 Pedro Alves * tracepoint.c (tfile_read): New. (tfile_open): Use it. (tfile_get_traceframe_address): Use it. (tfile_trace_find): Use it. (walk_blocks_callback_func): New typedef. (match_blocktype): New function. (traceframe_walk_blocks): New function. (traceframe_find_block_type): New function. (tfile_fetch_registers, tfile_xfer_partial) (tfile_get_trace_state_variable_value): Use traceframe_find_block_type and tfile_read. 2011-01-26 Kevin Buettner * remote-mips.c: Add internationalization mark ups. Remove trailing \n from already marked up strings. 2011-01-26 Tom Tromey * python/py-prettyprint.c (print_string_repr): Clear 'addressprint' option when calling val_print_string. (print_children): Handle Val_pretty_default. Clear 'addressprint' option when calling val_print_string. 2011-01-26 Tom Tromey * python/python.c (gdbpy_solib_name): Use gdb_py_longest and GDB_PY_LL_ARG. * python/python-internal.h (GDB_PY_LL_ARG, GDB_PY_LLU_ARG): New macros. (gdb_py_longest, gdb_py_ulongest): New typedefs. (gdb_py_long_from_longest, gdb_py_long_from_ulongest) (gdb_py_long_as_ulongest): New defines. (gdb_py_object_from_longest, gdb_py_object_from_ulongest) (gdb_py_int_as_long): Declare. * python/py-value.c (valpy_lazy_string): Use gdb_py_longest, GDB_PY_LL_ARG, gdb_py_object_from_longest. (valpy_long): Add comment. * python/py-utils.c (get_addr_from_python): Use gdb_py_long_as_ulongest. Handle overflow properly. (gdb_py_object_from_longest): New function. (gdb_py_object_from_ulongest): Likewise. (gdb_py_int_as_long): Likewise. * python/py-type.c (typy_array): Use gdb_py_int_as_long. * python/py-symtab.c (salpy_get_pc): Use gdb_py_long_from_ulongest. (salpy_get_line): Use PyInt_FromLong. * python/py-param.c (set_parameter_value): Use gdb_py_int_as_long. * python/py-lazy-string.c (stpy_get_address): Use gdb_py_long_from_ulongest. * python/py-frame.c (frapy_pc): Use gdb_py_long_from_ulongest. * python/py-cmd.c (cmdpy_completer): Use gdb_py_int_as_long. * python/py-breakpoint.c (bppy_set_thread): Use gdb_py_int_as_long. (bppy_set_task): Likewise. (bppy_set_ignore_count): Likewise. (bppy_set_hit_count): Likewise. * python/py-block.c (blpy_get_start): Use gdb_py_object_from_ulongest. (blpy_get_end): Likewise. (gdbpy_block_for_pc): Use gdb_py_ulongest and GDB_PY_LLU_ARG. 2011-01-25 Mathieu Lacage PR/symtab 11766: * gdb/objfiles.h (struct objfile) : New field. * gdb/solib.c (solib_read_symbols): Check for addr_low in equality test for objfile, initialize addr_low if needed. 2011-01-25 Pedro Alves * tui/tui-regs.c (tui_register_format): Remove dead code. 2011-01-25 Pedro Alves * printcmd.c (print_formatted): Use val_print_scalar_formatted instead of print_scalar_formatted. (print_scalar_formatted): Don't handle 's' format strings here, and add an assertion that we never see such format here. * valprint.h (val_print_scalar_formatted): Declare. * valprint.c (val_print_scalar_formatted): New. * c-valprint.c (c_val_print): Use val_print_scalar_formatted instead of print_scalar_formatted. * jv-valprint.c (java_val_print): Ditto. * p-valprint.c (pascal_val_print): Ditto. * ada-valprint.c (ada_val_print_1): Ditto. * f-valprint.c (f_val_print): Ditto. * infcmd.c (registers_info): Ditto. * m2-valprint.c (m2_val_print): Ditto. 2011-01-25 Pedro Alves * m2-valprint.c (print_unbounded_array): Pass value_contents_for_printing rather than value_contents, to m2_print_array_contents. Also pass in the value. 2011-01-25 Jan Kratochvil * dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index) (save_gdb_index_command): Switch to .gdb_index version 4. 2011-01-25 Pedro Alves * mi/mi-main.c (get_register): Use get_frame_register_value rather than frame_register, and always pass a valid value to val_print. 2011-01-25 Pedro Alves Centralize printing "". * valprint.h (val_print_optimized_out): Declare. * cp-valprint.c (cp_print_value_fields): Use val_print_optimized_out. * jv-valprint.c (java_print_value_fields): Ditto. * p-valprint.c (pascal_object_print_value_fields): Ditto. * printcmd.c (print_formatted): Ditto. * valprint.c (valprint_check_validity): Ditto. (value_check_printable): Ditto. (val_print_optimized_out): New. 2011-01-25 Pedro Alves * infcmd.c (default_print_registers_info): Allocate values so to never pass a NULL value to val_print. 2011-01-25 Pedro Alves * cp-valprint.c (cp_print_value): Treat the 'skip' local as boolean. Make sure to always pass a value that matches the contents buffer to callees. Preserve `address' for following iterations. * value.c (value_contents_for_printing_const): New. (value_address): Constify value argument. * value.h (value_contents_for_printing_const): Declare. (value_address): Constify value argument. 2011-01-25 Pedro Alves * regcache.c (struct regcache_descr): Rename sizeof_raw_register_valid_p field to sizeof_raw_register_status, and sizeof_cooked_register_valid_p to sizeof_cooked_register_status. (init_regcache_descr): Adjust. (struct regcache): Rename register_valid_p field to register_status. (regcache_xmalloc_1, regcache_xfree, regcache_save) (do_cooked_read): Adjust. (regcache_valid_p): Rename to ... (regcache_register_status): ... this. Adjust. (regcache_invalidate): Adjust. (regcache_raw_read, regcache_cooked_read, regcache_raw_write): Adjust. (regcache_raw_supply): Adjust. If buf i NULL, mark the register as unavailable, not valid. (regcache_dump): Adjust. * regcache.h (enum register_status): New. (regcache_register_status): Declare. (regcache_invalidate): Delete declaration. * corelow.c (get_core_registers): Adjust. * tracepoint.c (tfile_fetch_registers): Adjust. * trad-frame.c (REG_VALUE): Rename to ... (TF_REG_VALUE): ... this. (REG_UNKNOWN): Rename to ... (TF_REG_UNKNOWN): ... this. (trad_frame_set_value, trad_frame_set_unknown): Adjust. * mi/mi-main.c (register_changed_p): Adjust. 2011-01-25 Pedro Alves * regcache.c (struct regcache_descr): Remove outdated comment. (init_regcache_descr): Remove sizeof_raw_register_valid_p overallocate hack. (regcache_xmalloc): Rename to ... (regcache_xmalloc_1): ... this. Add `readonly_p' parameter. Allocate the regcache type accordingly. (regcache_xmalloc): New as wrapper around regcache_xmalloc_1. (regcache_xfree): Asser the source is also readonly. Copy sizeof cooked registers, not raw. (regcache_dup_no_passthrough): Delete. (get_thread_arch_regcache): Use regcache_xmalloc_1. * h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not mention obsolete write_register_bytes. * regcache.h (regcache_dup_no_passthrough): Delete declaration. 2011-01-25 Pedro Alves Stop remote_read_bytes from handling partial reads itself. * remote-fileio.c: Include target.h. (remote_fileio_write_bytes): Delete. (remote_fileio_func_open, remote_fileio_func_write) (remote_fileio_func_rename, remote_fileio_func_unlink): Use target_read_memory. (remote_fileio_func_stat): Use target_read_memory and target_write_memory. (remote_fileio_func_gettimeofday): Use target_write_memory. (remote_fileio_func_system): Use target_read_memory. * remote.c (remote_write_bytes): Make it static. (remote_read_bytes): Don't handle partial reads here. * remote.h (remote_read_bytes): Delete declaration. 2011-01-25 Pedro Alves Simplify XML parsing a bit. * xml-support.h (gdb_xml_parse_quick): Declare. * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed from gdb_xml_create_parser_and_cleanup, and added `old_chain' parameter. (gdb_xml_create_parser_and_cleanup): Reimplement on top of gdb_xml_create_parser_and_cleanup_1. (gdb_xml_parse_quick): New. * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick. * osdata.c (osdata_parse): Ditto. * remote.c (remote_threads_info): Ditto. * solib-target.c (solib_target_parse_libraries): Ditto. * xml-syscall.c (syscall_parse_xml): Ditto. * xml-tdesc.c (tdesc_parse_xml): Ditto. 2011-01-24 Kevin Buettner * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but with remote-mips.o added to gdb_target_obs. * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o. 2011-01-24 Pedro Alves * ada-valprint.c (val_print_packed_array_elements): Pass the correct struct value to val_print. (ada_val_print_1): Ditto. 2011-01-24 Pedro Alves Don't lose embedded_offset in printing routines throughout. * valprint.h (val_print_array_elements): Change prototype. * valprint.c (val_print_array_elements): Add `embedded_offset' parameter, and adjust to pass it down to val_print, while passing `valaddr' or `address' unmodified. Take embedded_offset into account when checking repetitions. * c-valprint.c (c_val_print): Pass embedded_offset to val_print_array_elements instead of adjusting `valaddr' and `address'. * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass embedded_offset to val_print_array_elements instead of adjusting `valaddr'. * p-lang.h (pascal_object_print_value_fields): Adjust prototype. * p-valprint.c (pascal_val_print): Pass embedded_offset to val_print_array_elements and pascal_object_print_value_fields instead of adjusting `valaddr'. (pascal_object_print_value_fields): Add `offset' parameter, and adjust to use it. (pascal_object_print_value): Add `offset' parameter, and adjust to use it. (pascal_object_print_static_field): Use value_contents_for_printing/value_embedded_offset, rather than value_contents. * ada-valprint.c (val_print_packed_array_elements): Add `offset' parameter, and adjust to use it. Use value_contents_for_printing/value_embedded_offset, rather than value_contents. (ada_val_print): Rename `valaddr0' parameter to `valaddr'. (ada_val_print_array): Add `offset' parameter, and adjust to use it. (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and `embedded_offset' to `offset'. Don't re-adjust `valaddr'. Instead work with offsets. Use value_contents_for_printing/value_embedded_offset, rather than value_contents. Change `defer_val_int' local type to CORE_ADDR, and use value_from_pointer to extract a target pointer, rather than value_from_longest. (print_variant_part): Add `offset' parameter. Replace `outer_valaddr' parameter by a new `outer_offset' parameter. Don't re-adjust `valaddr'. Instead pass down adjusted offsets. (ada_value_print): Use value_contents_for_printing/value_embedded_offset, rather than value_contents. (print_record): Add `offset' parameter, and adjust to pass it down. (print_field_values): Add `offset' parameter. Replace `outer_valaddr' parameter by a new `outer_offset' parameter. Don't re-adjust `valaddr'. Instead pass down adjusted offsets. Use value_contents_for_printing/value_embedded_offset, rather than value_contents. * d-valprint.c (dynamic_array_type): Use value_contents_for_printing/value_embedded_offset, rather than value_contents. * jv-valprint.c (java_print_value_fields): Add `offset' parameter. Don't re-adjust `valaddr'. Instead pass down adjusted offsets. (java_print_value_fields): Take `offset' into account. Don't re-adjust `valaddr'. Instead pass down adjusted offsets. (java_val_print): Take `embedded_offset' into account. Pass it to java_print_value_fields. * f-valprint.c (f77_print_array_1): Add `embedded_offset' parameter. Don't re-adjust `valaddr' or `address'. Instead pass down adjusted offsets. (f77_print_array): Add `embedded_offset' parameter. Pass it down. (f_val_print): Take `embedded_offset' into account. 2011-01-21 Joel Brobecker * inflow.c: Include "gdbcmd.h". (interactive_mode): New static global, moved here from top.c. (show_interactive_mode): New function, moved here from top.c. use gdb_has_a_terminal instead of input_from_terminal_p to determine the current mode. (gdb_has_a_terminal): Add handling of the "iteractive-mode" setting. (_initialize_inflow): Add the "set/show interactive-mode" commands. Moved here from top.c, after having adjusted slightly the help text. * top.c (interactive_mode, show_interactive_mode): Delete, moved to inflow.c. (input_from_terminal_p): Remove handling of "interactive-mode" setting, moved to infow.c. (init_main): Remove creation of the "set/show interactive-mode" commands, moved to inflow.c. 2011-01-19 Joel Brobecker * NEWS: Add entry for native ia64-hpux support. 2011-01-19 Tom Tromey PR mi/8618: * thread.c (free_thread): Free 'name'. (print_thread_info): Emit thread name. Change CLI output. (thread_name_command): New function. (do_captured_thread_select): Emit newline. (_initialize_thread): Register 'thread name' command. * target.h (struct target_ops) : New field. (target_thread_name): New macro. * target.c (update_current_target): Handle to_thread_name. * python/py-infthread.c (thpy_get_name): New function. (thpy_set_name): Likewise. (thread_object_getset): Add "name". * linux-nat.c (linux_nat_thread_name): New function. (linux_nat_add_target): Set to_thread_name. * gdbthread.h (struct thread_info) : New field. 2011-01-18 Joel Brobecker * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast. (ada_val_print_1): Likewise. 2011-01-18 Joel Brobecker * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue upper limit address is not greater than the function end address when the upper limit could not be computed using the debugging info. 2011-01-17 Tom Tromey * cli/cli-cmds.c (apropos_command): Free the compiled regex. Use get_regcomp_error. * utils.c: Include gdb_regex.h. (do_regfree_cleanup): New function. (make_regfree_cleanup): Likewise. (get_regcomp_error): Likewise. * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare. 2011-01-17 Tom Tromey * cli/cli-cmds.c (apropos_command): Fix formatting. Don't call re_compile_fastmap. 2011-01-17 Pierre Muller * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE for internal variables. (last_was_structop): New static variable. (COMPLETE): New token. (field_exp): New rule to group all '.' suffix handling. Add mark_struct_expression calls when approriate to be able to correctly find fields for completion. (yylex): Adapt to handle field completion and set INTVAR when required. 2011-01-14 Yao Qi * arm-tdep.c (arm_register_reggroup_p): FPS register is in save_reggroup, restore_reggroup and all_reggroup. 2011-01-14 Joel Brobecker * ada-valprint. (ada_printchar): Use the correct type length in call to ada_emit_char. * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR. 2011-01-14 Pierre Muller * solib-som.h (hpux_major_release): Declare variable here. * solib-som.c: Remove header. (DEFAULT_HPUX_MAJOR_RELEASE): New macro. (hpux_major_release): Make global, change default value to DEFAULT_HPUX_MAJOR_RELEASE. (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE. * hppa-hpux-nat.c: Add include. Add "solib-som.h" header. (set_hpux_major_release): New function. (_initialize_hppa_hpux_nat): Call set_hpux_major_release. 2011-01-14 Mike Frysinger * configure.tgt (*-*-uclinux*): Match more Linux os targets 2011-01-14 Joel Brobecker * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing new-line at end of warning message. (ia64_hpux_store_register): Remove trailing new-line at end of error message. * ia64-hpux-tdep.c: Rephrase comment. * solib-ia64-hpux.c (struct dld_info): Change type of field dld_flags from "long long" to ULONGEST. 2011-01-14 Pedro Alves * target.h (deprecated_child_ops): Delete declaration. * target.c (deprecated_child_ops): Delete definition. 2011-01-14 Pedro Alves * Makefile.in (hpux-thread.o): Delete rule. * configure.ac: Don't check for HPUX DCE threads support. * configure, config.in: Regenerate. * hppa-hpux-nat.c (child_suppress_run): Delete. (hppa_hpux_child_can_run): Delete. (_initialize_hppa_hpux_nat): Don't override to_can_run. * hpux-thread.c: Delete. 2011-01-13 Joel Brobecker * hpux-thread.c (hpux_pid_to_str): Delete. 2011-01-13 Joel Brobecker * ada-valprint.c (ada_emit_char): Remove strange code. Check that c is <= UCHAR_MAX before passing it to isascii. (char_at): Do not assume that TYPE_LEN is either 1 or 2. 2011-01-13 Joel Brobecker * top.c (input_from_terminal_p): Restrict the use of interactive_mode to the case where instream is stdin. 2011-01-13 Joel Brobecker * ia64-tdep.h (struct regcache): Forward declare. (struct ia64_infcall_ops): New struct type. (struct gdbarch_tdep): New fields "find_global_pointer_from_solib" and "infcall_ops". * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section): Renames ia64_find_global_pointer. (ia64_find_global_pointer, ia64_allocate_new_rse_frame) (ia64_store_argument_in_slot, ia64_set_function_addr: New function. (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops methods. (ia64_infcall_ops): New static global constant. (ia64_gdbarch_init): Set tdep->infcall_ops. * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function. (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing. * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h". (ia64_hpux_dummy_code): New static global constant. (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame) (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr) (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib): New function. (ia64_hpux_infcall_ops): New static global constant. (ia64_hpux_init_abi): Install gdbarch and tdep methods needed for inferior function calls to work properly on ia64-hpux. 2011-01-13 Joel Brobecker * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS. * ia64-tdep.h (struct frame_info): forward declaration. (struct gdbarch_tdep): Add field size_of_register_frame. * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame to determine the size of the register frame. (ia64_size_of_register_frame): New function. (ia64_gdbarch_init): Set tdep->size_of_register_frame. * ia64-hpux-tdep.c: Include "target.h" and "frame.h". (IA64_HPUX_UREG_REASON): New macro. (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame): New functions. (ia64_hpux_init_abi): Set tdep->size_of_register_frame. * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function. (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS objects. 2011-01-13 Joel Brobecker Add support for ia64-hpux. * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c, ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files. * configure.host: Add handling for ia64-hpux hosts. Add associated floatformats. * configure.tgt: Add handling for ia64-hpux targets. * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o. (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h. (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c. 2011-01-13 Joel Brobecker [ttrace] Compute thread list immediately after attach. * inf_ttrace_attach (inf_ttrace_create_threads_after_attach): New subprogram. (inf_ttrace_attach): Use it. 2011-01-13 Joel Brobecker * libunwind-frame.c (libunwind_frame_cache): Do not return NULL if we could not determine the frame's function address. Instead, use the frame's PC, and then continue. 2011-01-13 Joel Brobecker * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if not already defined. 2011-01-13 Joel Brobecker * ia64-tdep.c (ia64_struct_type_p): New function. (ia64_extract_return_value): Handle integral values that are less than 8 bytes long. (ia64_push_dummy_call): Likewise. 2011-01-13 Joel Brobecker * ia64-tdep.c (floatformat_ia64_ext_little): Renames floatformat_ia64_ext. (floatformat_ia64_ext_big): New static const. (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big. 2011-01-12 Tom Tromey * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error messages. * mi/mi-main.c (mi_cmd_thread_select): Fix error messages. (mi_cmd_thread_list_ids): Likewise. (mi_cmd_data_list_changed_registers): Likewise. (mi_cmd_data_list_register_values): Likewise. (mi_cmd_data_write_register_values): Likewise. (mi_cmd_data_evaluate_expression): Likewise. (mi_cmd_data_read_memory): Likewise. (mi_cmd_data_read_memory_bytes): Likewise. (mi_cmd_data_write_memory): Likewise. (mi_cmd_enable_timings): Likewise. * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages. * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages. (mi_cmd_var_delete): Likewise. (mi_cmd_var_set_format): Likewise. (mi_cmd_var_show_format): Likewise. (mi_cmd_var_info_num_children): Likewise. (mi_cmd_var_list_children): Likewise. (mi_cmd_var_info_type): Likewise. (mi_cmd_var_info_expression): Likewise. (mi_cmd_var_show_attributes): Likewise. (mi_cmd_var_assign): Likewise. (mi_cmd_var_update): Likewise. (mi_cmd_enable_pretty_printing): Likewise. (mi_cmd_var_set_update_range): Likewise. * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error messages. (mi_cmd_target_file_put): Likewise. (mi_cmd_target_file_delete): Likewise. * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error messages. (mi_cmd_stack_info_depth): Likewise. (mi_cmd_stack_list_locals): Likewise. (mi_cmd_stack_list_args): Likewise. (mi_cmd_stack_select_frame): Likewise. (mi_cmd_stack_select_frame): Likewise. (mi_cmd_stack_info_frame): Likewise. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error messages. (mi_cmd_file_list_exec_source_files): Likewise. * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages. (mi_cmd_env_cd): Likewise. (mi_cmd_env_path): Likewise. (mi_cmd_env_dir): Likewise. (mi_cmd_inferior_tty_show): Likewise. * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages. * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages. (mi_cmd_break_watch): Likewise. 2011-01-12 Thiago Jung Bauermann * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace. (ppc_linux_insert_hw_breakpoint): Likewise. (ppc_linux_remove_hw_breakpoint): Likewise. (ppc_linux_insert_watchpoint): Likewise. 2011-01-12 Andrew Burgess Jan Kratochvil PR fortran/11104 and DWARF unbound arrays detection. * dwarf2read.c (read_subrange_type): Set zero length on unspecified upper bound. Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on unspecified upper bound. * eval.c (evaluate_subexp_standard) : Remove variables array_size_array, tmp_type and offset_item. New variable array. Remove call to f77_get_upperbound. New variables array_type and index. Call value_subscripted_rvalue for each dimenasion. Remove the final call to deprecated_set_value_type. 2011-01-12 Jan Kratochvil Make value allocations more lazy. * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy instead of allocate_value and set_value_lazy when possible. * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy instead of allocate_value and set_value_lazy. * findvar.c (value_of_register_lazy): Likewise. (read_var_value): Remove V preallocation, call just check_typedef in advance. Move allocate_value to LOC_CONST, LOC_LABEL, LOC_CONST_BYTES. Use allocate_value_lazy in LOC_STATIC, LOC_ARG, LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK. Set ADDR instead of set_value_address and break in LOC_BLOCK. Use allocate_value_lazy and remove lval_memory set in LOC_REGPARM_ADDR. Use allocate_value_lazy in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT. Add setting lval_memory at the end, remove set_value_lazy there. * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy instead of allocate_value and set_value_lazy when possible. * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL. * value.c (allocate_computed_value): Use allocate_value_lazy instead of allocate_value and set_value_lazy. (value_from_contents_and_address): Use allocate_value_lazy instead of allocate_value and set_value_lazy when possible. 2011-01-12 Andrew Burgess * disasm.c (dump_insns): Support dumping opcodes for MI. * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control dumping of instruction opcodes. 2011-01-09 Robert Millan (tiny patch) * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi' appropiately. 2011-01-11 Tom Tromey * thread.c (do_captured_thread_select): Emit newline before printing frame. 2011-01-11 Michael Snyder * s390-tdep.c: Comment cleanup, mostly periods and spaces. * score-tdep.c: Ditto. * score-tdep.h: Ditto. * ser-base.c: Ditto. * ser-go32.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * ser-mingw.c: Ditto. * ser-pipe.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * sh64-tdep.c: Ditto. * shnbsd-nat.c: Ditto. * sh-tdep.c: Ditto. * sh-tdep.h: Ditto. * solib.c: Ditto. * solib-darwin.c: Ditto. * solib-frv.c: Ditto. * solib.h: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-spu.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solist.h: Ditto. * sol-thread.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * source.h: Ditto. * sparc64-linux-tdep.c: Ditto. * sparc64-tdep.c: Ditto. * sparc-linux-nat.c: Ditto. * sparc-linux-tdep.c: Ditto. * sparc-sol2-nat.c: Ditto. * sparc-sol2-tdep.c: Ditto. * sparc-tdep.c: Ditto. * sparc-tdep.h: Ditto. * spu-tdep.c: Ditto. * stabsread.c: Ditto. * stabsread.h: Ditto. * stack.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target.c: Ditto. * target-descriptions.c: Ditto. * target-descriptions.h: Ditto. * target.h: Ditto. * target-memory.c: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * trad-frame.h: Ditto. * typeprint.c: Ditto. 2011-01-11 Michael Snyder * ui-file.c: Comment cleanup, mostly periods and spaces. * ui-file.h: Ditto. * ui-out.c: Ditto. * ui-out.h: Ditto. * utils.c: Ditto. * v850-tdep.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * value.h: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vax-tdep.c: Ditto. * vec.c: Ditto. * vec.h: Ditto. * version.h: Ditto. * windows-nat.c: Ditto. * windows-tdep.c: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xml-support.c: Ditto. * xstormy16-tdep.c: Ditto. * xtensa-tdep.c: Ditto. * xtensa-tdep.h: Ditto. 2011-01-11 Thiago Jung Bauermann * breakpoint.c (resources_needed_watchpoint): Fix indentation. * gdbtypes.c (is_scalar_type_recursive): Fix formatting. 2011-01-11 Sergio Durigan Junior Thiago Jung Bauermann Implement support for PowerPC BookE ranged watchpoints. * breakpoint.h (struct breakpoint_ops) : New method. Initialize to NULL in all existing breakpoint_ops instances. (struct breakpoint) : New field. (target_exact_watchpoints): Declare external global. * breakpoint.c (target_exact_watchpoints): New global flag. (update_watchpoint): Set b->type to bp_hardware_watchpoint and b->enable_state to bp_enabled before calling hw_watchpoint_used_count. (hw_watchpoint_used_count): Iterate over all bp_locations in a watchpoint. Call breakpoint's breakpoint_ops.resources_needed if available. (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte if the watchpoint is exact. (resources_needed_watchpoint): New function. (watchpoint_breakpoint_ops): Add resources_needed_watchpoint. (watch_command_1): Set b->exact if the user asked for an exact watchpoint and one can be set. (can_use_hardware_watchpoint): Add exact_watchpoints argument. Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if the user asks for an exact watchpoint and one can be set. Return number of needed debug registers to watch the expression. * gdbtypes.c (is_scalar_type): New function, based on valprint.c:scalar_type_p. (is_scalar_type_recursive): New function. * gdbtypes.h (is_scalar_type_recursive): Declare. * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always handle regions when ranged watchpoints are available. (create_watchpoint_request): New function. (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use create_watchpoint_request. * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function. (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the `set powerpc' and `show powerpc' commands. * target.h (struct target_ops) : Mention documentation comment in the target macro. (target_region_ok_for_hw_watchpoint): Document return value. 2011-01-11 Thiago Jung Bauermann * breakpoint.c (update_watchpoint): Decide on using a software or hardware watchpoint after the bp_locations are created. 2010-01-11 Thiago Jung Bauermann Convert hardware watchpoints to use breakpoint_ops. * breakpoint.h (breakpoint_ops) : Rename to... : ... this. Return int instead of void. Accept pointer to struct bp_location instead of pointer to struct breakpoint. Adapt all implementations. (breakpoint_ops) : Rename to... : ... this. Accept pointer to struct bp_location instead of pointer to struct breakpoint. Adapt all implementations. * breakpoint.c (insert_catchpoint): Delete function. (insert_bp_location): Call the watchpoint or catchpoint's breakpoint_ops.insert method. (remove_breakpoint_1): Call the watchpoint or catchpoint's breakpoint_ops.remove method. (insert_watchpoint, remove_watchpoint): New functions. (watchpoint_breakpoint_ops): New structure. (watch_command_1): Initialize the OPS field. * inf-child.c (inf_child_insert_fork_catchpoint) (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint) (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint) (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint): Delete functions. (inf_child_target): Remove initialization of to_insert_fork_catchpoint, to_remove_fork_catchpoint, to_insert_vfork_catchpoint, to_remove_vfork_catchpoint, to_insert_exec_catchpoint, to_remove_exec_catchpoint and to_set_syscall_catchpoint. * target.c (update_current_target): Change default implementation of to_insert_fork_catchpoint, to_remove_fork_catchpoint, to_insert_vfork_catchpoint, to_remove_vfork_catchpoint, to_insert_exec_catchpoint, to_remove_exec_catchpoint and to_set_syscall_catchpoint to return_one. (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint) (debug_to_insert_exec_catchpoint): Report return value. * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint) (to_insert_exec_catchpoint): Change declaration to return int instead of void. 2011-01-11 Michael Snyder * arm-tdep.c: Internationalization. * c-lang.c: Ditto. * charset.c: Ditto. * fork-child.c: Ditto. * nto-procfs.c: Ditto. * ppc-sysv-tdep.c: Ditto. * procfs.c: Ditto. * remote-mips.c: Ditto. * remote.c: Ditto. * rs6000-nat.c: Ditto. * rs6000-tdep.c: Ditto. * target.c: Ditto. * valops.c: Ditto. * value.c: Ditto. * xml-support.c: Ditto. * mi/mi-cmd-break.c: Ditto. * mi/mi-cmd-var.c: Ditto. * mi/mi-interp.c: Ditto. * mi/mi-main.c: Ditto. 2011-01-11 Andrew Burgess * remote-sim.c (gdbsim_store_register): Update API to sim_store_register to check more error conditions. 2011-01-10 Michael Snyder * nto-procfs.c: Comment cleanup, mostly periods and spaces. * nto-tdep.c: Ditto. * nto-tdep.h: Ditto. * objc-exp.y: Ditto. * objc-lang.c: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * observer.c: Ditto. * opencl-lang.c: Ditto. * osabi.c: Ditto. * parse.c: Ditto. * parser-defs.h: Ditto. * p-exp.y: Ditto. * p-lang.c: Ditto. * posix-hdep.c: Ditto. * ppcbug-rom.c: Ditto. * ppc-linux-nat.c: Ditto. * ppc-linux-tdep.c: Ditto. * ppc-linux-tdep.h: Ditto. * ppcnbsd-tdep.c: Ditto. * ppcobsd-tdep.c: Ditto. * ppcobsd-tdep.h: Ditto. * ppc-sysv-tdep.c: Ditto. * ppc-tdep.h: Ditto. * printcmd.c: Ditto. * proc-abi.c: Ditto. * proc-flags.c: Ditto. * procfs.c: Ditto. * proc-utils.h: Ditto. * progspace.h: Ditto. * prologue-value.c: Ditto. * prologue-value.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * ravenscar-sparc-thread.c: Ditto. * ravenscar-thread.c: Ditto. * ravenscar-thread.h: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote.c: Ditto. * remote-fileio.c: Ditto. * remote-fileio.h: Ditto. * remote.h: Ditto. * remote-m32r-sdi.c: Ditto. * remote-mips.c: Ditto. * remote-sim.c: Ditto. * rs6000-aix-tdep.c: Ditto. * rs6000-nat.c: Ditto. * rs6000-tdep.c: Ditto. 2011-01-10 Michael Snyder * charset.c (validate): Internationalization. * coffread.c (read_one_sym): Ditto. * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto. * h8300-tdep.c (H8300_extract_return_value): Ditto. * inflow.c (new_tty): Ditto. * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto. * m32c-tdep.c (m32c_return_value): Ditto. * mep-tdep.c (mep_store_return_value): Ditto. * score-tdep.c (score7_fetch_insn): Ditto. * ser-mingw.c (pipe_windows_open): Ditto. * sh64-tdep.c (sh64_extract_return_value): Ditto. * spu-tdep.c (spu_register_type): Ditto. * tracepoint.c (trace_find_command): Ditto. * valarith.c (value_pos): Ditto. 2011-01-10 Joel Brobecker * ada-valprint.c (printstr): Minor comment reformatting. 2011-01-08 Michael Snyder * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _ markup. 2011-01-08 Michael Snyder * h8300-tdep.c: Comment cleanup, mostly periods and spaces. * hppa-hpux-tdep.c: Ditto. * hppa-linux-nat.c: Ditto. * hppa-linux-tdep.c: Ditto. * hppanbsd-tdep.c: Ditto. * hppa-tdep.c: Ditto. * hppa-tdep.h: Ditto. * hpux-thread.c: Ditto. * i386-cygwin-tdep.c: Ditto. * i386-darwin-nat.c: Ditto. * i386gnu-nat.c: Ditto. * i386-linux-nat.c: Ditto. * i386-linux-tdep.c: Ditto. * i386-nat.c: Ditto. * i386-nat.h: Ditto. * i386nbsd-tdep.c: Ditto. * i386-sol2-nat.c: Ditto. * i386-stub.c: Ditto. * i386-tdep.c: Ditto. * i386-tdep.h: Ditto. * i387-tdep.c: Ditto. * ia64-linux-nat.c: Ditto. * ia64-linux-tdep.c: Ditto. * ia64-tdep.c: Ditto. * infcall.c: Ditto. * infcall.h: Ditto. * infcmd.c: Ditto. * inferior.c: Ditto. * inferior.h: Ditto. * infloop.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * interps.c: Ditto. * interps.h: Ditto. * iq2000-tdep.c: Ditto. * irix5-nat.c: Ditto. * jit.c: Ditto. * jit.h: Ditto. * jv-exp.y: Ditto. * jv-lang.c: Ditto. * jv-lang.h: Ditto. * jv-typeprint.c: Ditto. * jv-valprint.c: Ditto. * language.c: Ditto. * language.h: Ditto. * linespec.c: Ditto. * linux-fork.c: Ditto. * linux-nat.c: Ditto. * linux-thread-db.c: Ditto. * lm32-tdep.c: Ditto. 2011-01-08 Michael Snyder * m2-exp.y: Comment cleanup, mostly periods and spaces. * m2-lang.c: Ditto. * m2-typeprint.c: Ditto. * m2-valprint.c: Ditto. * m32c-tdep.c: Ditto. * m32r-linux-nat.c: Ditto. * m32r-rom.c: Ditto. * m32r-tdep.c: Ditto. * m32r-tdep.h: Ditto. * m68hc11-tdep.c: Ditto. * m58klinux-nat.c: Ditto. * m68k-tdep.c: Ditto. * m88k-tdep.c: Ditto. * m88k-tdep.h: Ditto. * machoread.c: Ditto. * macrocmd.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * mdebugread.h: Ditto. * memattr.c: Ditto. * memattr.h: Ditto. * memory-map.h: Ditto. * mep-tdep.c: Ditto. * microblaze-rom.c: Ditto. * microblaze-tdep.c: Ditto. * minsyms.c: Ditto. * mips-irix-tdep.c: Ditto. * mips-linux-nat.c: Ditto. * mips-linux-tdep.c: Ditto. * mips-linux-tdep.h: Ditto. * mipsnbsd-nat.c: Ditto. * mipsnbsd-tdep.c: Ditto. * mipsread.c: Ditto. * mips-tdep.c: Ditto. * mips-tdep.h: Ditto. * mn10300-linux-tdep.c: Ditto. * mn10300-tdep.c: Ditto. * mn10300-tdep.h: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * moxie-tdep.c: Ditto. * moxie-tdep.h: Ditto. * mt-tdep.c: Ditto. 2011-01-08 Mike Frysinger * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name. 2011-01-08 Robert Millan * fbsd-nat.c (fbsd_find_memory_regions): Fix typo. 2011-01-07 Michael Snyder * charset.c (_initialize_charset): Fix typo in string. 2011-01-07 Michael Snyder * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message for i18n. * tui/tui-layout.c (tui_set_layout_for_display_command): Split line so that operator goes to beginning of line. * tui/tui-winsource.c (tui_horizontal_source_scroll): Move assignment out of if statement. 2011-01-07 Michael Snyder * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. 2011-01-07 Michael Snyder * ax-gdb.c: Adjust some long output strings. * breakpoint.c: Ditto. * charset.c: Ditto. * cp-abi.c: Ditto. * infcall.c: Ditto. * infrun.c: Ditto. * linux-nat.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. 2011-01-06 Tom Tromey PR python/12367: * NEWS: Add item. * python/python.c (GdbMethods): Add "newest_frame" method. * python/python-internal.h (gdbpy_newest_frame): Declare. * python/py-frame.c (gdbpy_newest_frame): New function. 2010-01-06 Paul Pluzhnikov * jit.h (struct jit_code_entry): use ULONGEST for symfile_size. * jit.c (jit_debug): New variable. (show_jit_debug): New function. (struct target_buffer): Use ULONGEST. (bfd_open_from_target_memory): Likewise. (jit_register_code, jit_inferior_init): Add debug output. (_initialize_jit): Register "debug jit" command. 2011-01-06 Tom Tromey * frame.h (enum frame_type) : Fix comment. * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME and ARCH_FRAME. 2011-01-06 Tom Tromey * python/py-frame.c (frapy_block): Use get_frame_block. 2011-01-06 Joel Brobecker Do not stop on SIGPRIO signals by default * infrun.c (_initialize_infrun): Unset signal_stop and signal_print for TARGET_SIGNAL_PRIO. 2011-01-06 Joel Brobecker * ada-tasks.c: Fix style violation in comment. 2011-01-06 Joel Brobecker * linespec.c (decode_compound, find_method): Remove trailing \n at end of error string. * solib-irix.c (irix_current_sos): Likewise. * varobj.c (uninstall_variable): Likewise. 2011-01-06 Joel Brobecker * copyright.py: New script. * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc. Launch emacs without exec'ing. Call copyright.py afterwards. 2011-01-05 Michael Snyder * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto. 2011-01-05 Michael Snyder * cli/cli-cmds.c: Shorten lines of >= 80 columns. * cli/cli-decode.c: Ditto. * cli/cli-dump.c: Ditto. * cli/cli-logging.c: Ditto. * cli/cli-script.c: Ditto. * cli/cli-setshow.c: Ditto. * common/signals.c: Ditto. * mi/mi-cmd-break.c: Ditto. * mi/mi-cmd-disas.c: Ditto. * mi/mi-cmd-stack.c: Ditto. * mi/mi-cmd-var.c: Ditto. * mi/mi-cmds.c: Ditto. * mi/mi-common.h: Ditto. * mi/mi-console.c: Ditto. * mi/mi-interp.c: Ditto. * mi/mi-main.c: Ditto. * osf-share/cma_attr.c: Ditto. * osf-share/cma_deb_core.h: Ditto. * osf-share/cma_debug_client.h: Ditto. * osf-share/cma_handle.h: Ditto. * osf-share/cma_mutex.h: Ditto. * osf-share/cma_stack_int.h: Ditto. * osf-share/cma_tcb_defs.h: Ditto. * python/py-auto-load.c: Ditto. * python/py-breakpoint.c: Ditto. * python/py-cmd.c: Ditto. * python/py-frame.c: Ditto. * python/py-objfile.c: Ditto. * python/py-param.c: Ditto. * python/py-progspace.c: Ditto. * python/py-symbol.c: Ditto. * python/py-value.c: Ditto. * python/python-internal.h: Ditto. * python/python.c: Ditto. * tui/tui-data.c: Ditto. * tui/tui-disasm.c: Ditto. * tui/tui-hooks.c: Ditto. * tui/tui-io.c: Ditto. * tui/tui-layout.c: Ditto. * tui/tui-regs.c: Ditto. * tui/tui-source.c: Ditto. * tui/tui-stack.c: Ditto. * tui/tui-win.c: Ditto. * tui/tui-windata.c: Ditto. * tui/tui-winsource.c: Ditto. 2011-01-05 Joel Brobecker * configure.ac, gdb.1: Copyright year update. 2011-01-03 Jan Kratochvil * frame.c (get_prev_frame_1) : New variables this_pc_in_block, morestack_msym and morestack_name. Check for "__morestack" minimal symbol there. 2011-01-03 Joel Brobecker * symfile.c (find_sym_fns): Add call to dont_repeat. 2011-01-01 Joel Brobecker Copyright year update in most files (performed by copyright.sh). 2011-01-01 Joel Brobecker * top.c (print_gdb_version): Update copyright year in version output. For older changes see ChangeLog-2010. Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never coding: utf-8 End: