Sun Oct 27 14:09:25 1991 John Gilmore (gnu at cygnus.com) * buildsym.c: Break out initial malloc sizes. (record_line): Record directly in a subfile. Alloc on demand. (compare_line_numbers): Add from xcoffread.c. (end_symtab): New params say whether to sort pendings and linetable. Patch block stabs if defined. Shrink linetable before allocating the symtab. * buildsym.h: Delete line_vector* and prev_line_number. Add global_stabs and file_stabs for xcoffread. * dbxread.c (start_subfile): Move to buildsym. Change above calls. * symtab.h: LINETABLE(symtab) can now be null. Zap LINELIST. * symmisc.c, symtab.c: Cope with null LINETABLEs. * blockframe.c: Pass fromleaf to INIT_EXTRA_FRAME_INFO. * tm-29k.h, tm-88k.h, tm-i960.h, tm-irix3.h, tm-mips.h, tm-pyr.h, tm-sparc.h: Accept fromleaf parameter. * c-exp.y (yyerror): Pass error message if given. * configure.in: Add rs6000 host and target. * inflow.c (new_tty): O_NOCTTY kludge for RS/6000. * symfile.h (entry_point): Add. Sat Oct 26 00:16:32 1991 John Gilmore (gnu at cygus.com) * buildsym.c: New file. Breaks out symbol-table-building routines from dbxread.c, so they can be shared with xcoffread.c. * buildsym.h: New file. Declarations for buildsym.c users. * dbxread.c: Remove large chunks into buildsym.c. * Makefile.in: Add buildsym.c and buildsym.h. * symfile.c (syms_from_bfd): New routine. (add_symbol_file): Call it to do the real work. (syms_from_bfd): Initialize entry_point before calling symfile_init. * symtab.h, symfile.c, coffread.c, mipsread.c, dwarfread.c: Avoid declaring or setting entry_point (symfile.h & symfile.c cope). Fri Oct 25 18:59:32 1991 Per Bothner (bothner at cygnus.com) Various fixes to improve g++ debugging. * symtab.h: Add is_const and is_volatile flags for each method. These are bit fields - take their space from voffset, which shrinks to 30 bits. Since voffset is now a bitfield, make it unsigned for portability. This changes its interpretation slightly: Static methods now have voffset 1 instead of -1, and virtual offsets start at 2, not 1. * symtab.c: Renamed gdb_mangle_typename to gdb_mangle_name, since it now returns an entire magled method name, not just the type part. This avoids some duplication. It also allows us to correctly mangle const and volatile methods (using the new is_const and is_volatile bit fields mentioned above). * valprint.c (type_print_base), values.c (check_stub_method): Simplify by using new gdb_mangle_name. * values.c (value_headof): Fix to correctly handle single inheritance (actually two fixes, either of which suffices). * dbxread.c (read_struct_type): Handle const and volatile method specifiers. * dbxread.c (read_struct_type): Yet one more place where we must handle '\\' continuations. * valprint.c (vtbl_ptr_name): Add final '\0'. Fri Oct 25 16:06:38 1991 Stu Grossman (grossman at cygnus.com) * tm-sparc.h, tm-68k.h (EXTRACT_RETURN_VALUE): fix output of short return values for sparc and 68k. Patch from Paul Eggert. * coffread.c, coredep.c, i386-xdep.c: install patches for SysV/386 3.2 from Mauro DePalma. Fri Oct 25 02:02:13 1991 John Gilmore (gnu at cygnus.com) * core.c (core_file_info), exec.c (exec_file_info): Print file type. Use printf_filtered. * valops.c (value_fetch_lazy): Avoid 0-length fetches. Thu Oct 24 23:06:40 1991 Fred Fish (fnf at cygnus.com) * dwarfread.c: Add casts to remove compiler warnings. * tm-3b1.h, tm-68k.h, tm-altos.h, tm-amix.h, tm-hp300bsd.h, tm-hp300hpux.h, tm-isi.h, tm-news.h, tm-pn.h, tm-sun2.h, tm-sun3.h: Remove locally duplicated code for calling functions in the inferior. The only differences were in the specific trap vectors used and whether or not an fpu was present. These are now handled by appropriate definitions of BPT_VECTOR and HAVE_68881 respectively. Other minor obvious cleanups. * valops.c: Correct a minor misspelling. * utils.c: Remove local BSD/USG hacks that are now in libiberty. * dwarfread.c: Remove prototype for dwarfwarn. Does not work with . Thu Oct 24 09:33:44 1991 John Gilmore (gnu at cygnus.com) * stack.c (frame_command): Always print. Use new frame_select_command to select a frame without printing. * dwarfread.c: Use , since is not portable. Thu Oct 24 01:32:51 1991 Fred Fish (fnf at cygnus.com) * dwarfread.c: New file for DWARF debugging format support. * elfread.c: New file for ELF object file format support. * procfs.c: New file for SVR4 /proc (process file system) support. * tm-amix.h, xm-amix.h, tconfig/amix, xconfig/amix: New files for Amiga UNIX support. * xm-svr4.h, tm-svr4.h: New files for SVR4 support. * xm-m68k.h: New file for host machines with m68k cpu. * Makefile.in: Add elfread.c and dwarfread.c to SFILES_MAINDIR. Add elfread.o and dwarfread.o to OBS. * symfile.h: Add "elf" to list of supported formats in comment. * c-exp.y, defs.h, symtab.h, valprint.c: Add three new builtin types to gdb, builtin_type_long_double, builtin_type_complex, and builtin_type_double_complex. Add and use new TARGET_SHORT_BIT, TARGET_INT_BIT, TARGET_LONG_BIT, TARGET_FLOAT_BIT, TARGET_DOUBLE_BIT, TARGET_LONG_DOUBLE_BIT, TARGET_COMPLEX_BIT, and TARGET_DOUBLE_COMPLEX_BIT, as the sizes in bits of the indicated types on the target machine (ala the existing TARGET_LONG_LONG_BIT). * infrun.c: When using SVR4 /proc interface instead of ptrace(), call proc_set_exec_trap() to setup child to stop at first instruction. * inftarg.c: When using SVR4 /proc interface, call proc_wait() rather than wait(). * m68k-tdep.c: Add new routines supply_gregset(), fill_gregset(), supply_fpregset(), and fill_fpregset(), which are machine dependent support routines for SVR4 /proc interface. * utils.c: Add warning_setup() and warning(). Warning() behaves the same as error() except that it returns normally rather than jumping back to command level. Modules that don't want to call warning() for some reason, but want to produce their own warnings, can call warning_setup() to ensure compatibility with the way warning() and error() deal with the terminal. * symtab.c: Make internal errors produce more useful messages. * tm-68k.h: Move code that is duplicated in almost every single m68k based machine's configuration files to this common file. Duplications in the configuration files still need to be removed (FIXME). * infrun.c (child_create_inferior): System V versions must call setpgrp() with no arguments, to comply with prototyping typically in . * munch: Add support for SVR4 style nm output. * dbxread.c, mipsread.c symmisc.c, symtab.c: Remove the object file specific fields from the partial symbol table structure and replace them with a pointer to private data for each different flavor of object file reader to initialize appropriately. Wed Oct 23 09:38:20 1991 John Gilmore (gnu at cygnus.com) * xconfig/sun[34]os4: Add note about strstr botch on sunos4.0.3c and previous. * mipsread.c (fixup_undef_type): New function. If a struct / union / enum is defined in a header file but nowhere else used, (by typedefing, pointer referencing or declaration) the mipsread code builds the complete tree for the structure but leaves its code as TYPE_CODE_UNDEF as it doesn't know what kind of aggregate it is. Guess its type based on the details of the members. Tue Oct 22 18:04:32 1991 Stu Grossman (grossman at cygnus.com) * infrun.c (wait_for_inferior): Check return value from find_pc_line. Mon Oct 21 17:47:03 1991 Stu Grossman (grossman at cygnus.com) * infrun.c (wait_for_inferior): fix stepi/nexti that was broken by my last edit to this routine. Mon Oct 21 14:27:43 1991 John Gilmore (gnu at cygnus.com) * tm-sun3.h (FIX_CALL_DUMMY): problem with cross debugging. FIX_CALL_DUMMY does unaligned accesses and/or forgets to byte swap the values before putting them into the dummy code. (From Peter Schauer) Mon Oct 21 10:04:39 1991 Steve Chamberlain (steve at rtl.cygnus.com) * configure.in: added ebmon target. Wed Oct 16 22:49:58 1991 John Gilmore (gnu at cygnus.com) GDB-4.2 release! * Makefile.in: Roll VERSION to 4.2. * README, TODO, WHATS.NEW: Update. * core.c (core_open): Improve error message for bad file. Pass .reg virtual memory address to fetch_core_registers to help it find the registers in the core-file header. * coredep.c (fetch_core_registers): Take new argument, use it, and pass it to register_addr to locate the block of registers. * xm-mips.h: Update KERNEL_U_ADDR for new scheme. Cleanup a bit. * dbxread.c (read_dbx_symtab, process_one_symbol): Handle Sequent N_FN_SEQ like everybody else's N_FN. * main.c: Circumvent SCO cc bug with #if !!defined(USG). * tm-i386v.h: #endif guck. * xconfig/i386*: Remove -Dgetpagesize()=4096 kludge. * xconfig/i386sco: Add HAVE_STRSTR to avoid ANSI bdeath. * xconfig/tahoe: Add REGEX, which seems to be missing. * coredep.c: Add for SCOnix. * dbxread.c (read_dbx_symntab): Avoid coredump on malformed file. * printcmd.c (print_formatted): Flush output before disassembly. Tue Oct 15 20:12:32 1991 Roland H. Pesch (pesch at fowanton.cygnus.com) * doc/refcard.tex (sec "Working Files"): consistent metavars and other improvements, due to comments by François Pinard (pinard@iro.umontreal.ca) * doc/gdb.texinfo (appendix "Installing GDB"): changes in configure, and improvenets related to Pinard's refcard comments Tue Oct 15 08:45:12 1991 John Gilmore (gnu at cygnus.com) Changes from Fred Fish: * tm-68k.h (FPI_REGNUM): Add. * infrun.c (child_create_inferior): flush stdout and stderr before forking. * configure.in: Handle amigados, amix hosts and targets. * inflow.c: Handle TIOCGLTC_BROKEN for Amiga. From Andreas Schwab: * values.c (show_convenience): Use printf_filtered. * main.c (define_command): Check result of lookup_command for exact match. (echo_command): Use printf_filtered, and force output out. * dbxread.c (read_enum_type): Avoid Modula-2 kludge that breaks C programs. * i387-tdep.c (double_to_i387): Fix typo for double_to_ieee_extended. * utils.c (_initialize_utils): If !ISATTY, don't paginate. * configure.in, tconfig/decstation, xconfig/decstation: Rename dec3100 to decstation. Mon Oct 14 13:37:50 1991 Roland H. Pesch (pesch at cygnus.com) * doc/gdb.texinfo: Catch up to changes recorded here in ChangeLog (nodes Continuing and Stepping; Memory; Targets) clarifications due to Larry Breed Fri Oct 11 23:27:06 1991 John Gilmore (gnu at cygnus.com) * tm-{irix3,mips,nindy960,pn,symmetry,vx960}.h: Move REGISTER_U_ADDR to corresponding xm- file. Sugg. by Peter Schauer. * symmisc.c (print_partial_symtabs): Add printpsyms debug cmd. * m68k-tdep.c (m68k_push_dummy_frame, m68k_pop_frame): Add generic routines for calling inferior functions. * blockframe.c (inside_main_scope, inside_entry_scope): New. * copying.awk: Filter formfeeds out of copying & warrantee. Make them available as `show copying' and `show warrantee' also. * main.c (print_gnu_advertisement): Advt `show' commands. Thu Oct 10 17:25:47 1991 John Gilmore (gnu at cygnus.com) * mach386-xdep.c: Even when cross-compiling, leave in the core-file reading code. * core.c (get_core_registers): Avoid coredump if no .reg section. Wed Oct 9 17:03:34 1991 John Gilmore (gnu at cygnus.com) * mipsread.c, coffread.c: initialise TYPE_VPTR_FIELDNO to -1. This avoids coredumps under `set print object on' in value_headof (called erroneously by value_from_vtable_info) for `p &struct' or `p *struct'. From Peter Schauer. Mon Oct 7 00:06:52 1991 John Gilmore (gnu at cygnus.com) * Makefile.in: Roll version to 4.1.2. * dbxread.c: Use aout64.h, not a.out.gnu.h. Get external symbol entry size from BFD (but, FIXME, we don't yet read external nlists's and convert them to internal nlists's before handling them -- we still assume they have the same size and alignment.) Use SET_NAMESTRING everywhere useful. * exec.c (exec_file_command): Move dead coff-encapsulation code to BFD. * m88k-tdep.c, m88k-xdep.c: Remove encap test and #inc . Fri Oct 4 22:30:06 1991 John Gilmore (gnu at cygnus.com) * configure.in, tm-i386v.h, xm-i386v.h: Intel 386 Mach host port. * xm-i386mach.h, mach386-xdep.c, xconfig/i386mach: New files. Fri Oct 4 17:04:31 1991 Per Bothner (bothner at cygnus.com) More patches from Peter Schauer : * mips-xdep.c (store_inferior_registers): Don't try to write the (pseudo) FP. * mipsread.c (parse_partial_symbols): Improved algorithm for setting pst->texthigh. Fri Oct 4 16:47:32 1991 Roland H. Pesch (pesch at cygnus.com) * doc/Makefile: make TEXINPUTS include . everywhere Fri Oct 4 00:35:56 1991 John Gilmore (gnu at cygnus.com) * coffread.c, dbxread.c, symfile.c, symmisc.c, symtab.h: Remove vestiges of typevectors, which were for symsegs and are no longer used. (From a question by Eliot Dresselhaus ). Thu Oct 3 09:33:26 1991 John Gilmore (gnu at cygnus.com) * dbxread.c, coffread.c: static-ize functions that were gratuitiously external. (From Fred Fish.) * c-exp.y: sym->class to SYMBOL_CLASS (sym). * dbxread.c (dbx_lookup_type): Keep doubling size of typevector until it is large enough. * dbxread.c (read_type): Handle error case slightly better. Make complaint message not C++-specific. Wed Oct 2 17:21:07 1991 Stu Grossman (grossman at cygnus.com) * infrun.c (wait_for_inferior): Fix step/next so that you only stop at the beginning of a new line. This fixes various problems with for loops, nested if-else's and switch statements. Tue Oct 1 06:33:55 1991 John Gilmore (gnu at cygnus.com) * symtab.c (lookup_symtab_1, lookup_symbol): "fatal" errors between symtabs and psymtabs become ordinary error()s. * dbxread.c (read_dbx_symtab): Relocate end_of_text_addr properly, making "end pc" correct in shared lib psymtabs. (From Guy Harris .) Mon Sep 30 13:15:31 1991 John Gilmore (gnu at cygnus.com) * dbxread.c: Enable, but soften, const_vol_complaint. (read_dbx_symtab): N_STSYM and N_LCSYM define static vars. Ditto Gould N_NBSTS and N_NBLCS. Also, all types in the psymtab should be file-scope, not global. (read_struct_type): Remove ancient multiple-inheritance warning. (read_range_type): Check base type, complain & patch if undefined. * stack.c (frame_info): Demangle the function name in `info stack'. (From Peter Schauer) Sat Sep 28 10:02:33 1991 John Gilmore (gnu at cygnus.com) * eval.c (evaluate_subexp_for_address): Don't use TYPE_POINTER_TYPE directly (it might be zero if this type has never had a pointer created before); use lookup_pointer_type. * symtab.c (lookup_method_type): Arguments were swapped in all callers, so fix it here. I'm amazed this worked at all! Fri Sep 27 18:09:31 1991 John Gilmore (gnu at cygnus.com) * c-exp.y, m2-exp.y: Define more yysymbols that happen to be "bss" rather than "data" symbols, but which still conflict. * m2-exp.y: Lint. * coffread.c (coff_symfile_read): Use xmalloc, not malloc. * core.c (core_files_info): Shorten output. * exec.c (exec_files_info): Ditto. (build_section_table): Ignore zero-length sections. * language.c, printcmd.c: Lint. * language.h (get_frame_language): Declare. * saber.suppress: update. * stack.c (find_relative_frame): Remove complex code that was #if 0'd, stick with simple code. Lint. * saber.suppress: Update a bit. * symfile.c (add_symbol_file_command): Add "?" to question. * utils.c (parse_escape): Avoid \a due to bdead compilers. * value.h: Declare typedef_print. * valprint.c (val_print, type_print_base): TYPE_CODE_RANGE less kludgey. * nindy-tdep.c (nindy_frame_chain_valid): Use lookup_misc_func. (Reported by Mark Peek .) * solib.c (solib_map_sections): Relocate all sections, even though only the text section's size is tracked. Mark ld_text for eventual elimination as we generalize to N sections. * infrun.c (wait_for_inferior): Don't check if the PC is in a call_dummy if we were stopped by a random signal that is being passed to the program. This produced wierd results when calling functions in the inferior and signals (e.g. SIGALRM) were in use. Tue Sep 24 18:05:30 1991 John Gilmore (gnu at cygnus.com) * infrun.c (IN_SIGTRAMP): Not parenthesized properly. Bugfix from Paul Eggert . * tm-ultra3.h (IN_SIGTRAMP): Ditto. * valprint.c (print_floating): Print 9 digits for IEEE floats. From Paul Eggert. Mon Sep 23 15:50:07 1991 John Gilmore (gnu at cygnus.com) * Makefile.in: Roll VERSION to 4.1.1. * source.c (line_info): Peter Schauer fixes a bug I introduced in hex conversion. Fri Sep 20 16:10:52 1991 John Gilmore (gnu at cygnus.com) GDB-4.1 release! * Makefile.in (VERSION): Set to 4.1. * language.c (set_language_command): Print useful help message, and restore the language string after giving help. * valprint.c (typedef_print): Print typedef in C or M2. * symtab.c (list_symbols): Use it. * main.c (main): Avoid any output before (gdb) prompt when -q. * language.c (set_language_command): Handle errors by restoring the language string to its current state (fix from A. Beers). * doc/gdbint.texinfo: Roll in information from README. Rearrange "how to install" and "how to print the doc" stuff so it drops easier into README. * configure.in: Rename rtpc CPU to romp to match config.sub. * README, WHATS.NEW, TODO: Update for gdb-4.1. Fri Sep 20 17:39:14 1991 Roland H. Pesch (pesch at cygnus.com) * doc/gdb.texinfo: Updates from ChangeLog. set/show write, autoloading shared libs, copyright etc on GDB startup, clean up $_ and $__ index refs, set/show listsize and related updates to list cmd. New host/target configs. Fri Sep 20 15:46:00 1991 Roland H. Pesch (pesch at cygnus.com) * doc/Makefile: generate aux version-no file doc/gdbVN.m4 from main Makefile.in version definition doc/gdb.texinfo: use version recorded in doc/gdbVN.m4 for current GDB version no refs Makefile.in (setup-to-dist): generate doc/gdbVN.m4 * doc/gdb.texinfo: merge new language-switching and lang-specific doc by Andrew Beers Fri Sep 20 15:00:57 1991 Per Bothner (bothner at cygnus.com) * mcheck.c: Add __ONEFILE kludge to allow compilation by non-ANSI compilers (which may lack stddef.h). Fri Sep 20 13:29:42 1991 John Gilmore (gnu at cygnus.com) * dbxread.c (read_dbx_symtab, process_one_symbol): N_FN and N_WARNING are the same except for the N_EXT bit, so just use their values alone, rather than OR-ing them with N_EXT. Fri Sep 20 12:27:55 1991 Stu Grossman (grossman at cygnus.com) * mipsread.c (parse_lines): Deal with negative extended line offsets correctly. * c-exp.y, m2-exp.y: #define yyerrflag and yynerrs to avoid global symbol conflicts. Fri Sep 20 02:28:15 1991 John Gilmore (gnu at cygnus.com) * .gdbinit: Move 'set complaints' to top, so it runs even in case we aren't debugging GDB. * language.c (_initialize_language): Fix type check and range check documentation strings. * utils.c (!HAVE_VPRINTF): Define vfprintf as a function, so language.c can use it. (Though language.c should really not be handling warnings/errors the way it does, FIXME.) * symtab.c (lookup_primitive_type): const lint. Bugfix from Peter Schauer: * source.c (lines_to_list): Make signed, to avoid comparison going unsigned and complaining that -3 is too high for 21 lines. * stack.c (lines_to_list): Ditto. Thu Sep 19 23:33:41 1991 John Gilmore (gnu at cygnus.com) * Makefile.in (HFILES): Add minimon.h. (VERSION): Roll version number to 4.0.95. (gdb.tar.Z, make-proto-gdb.dir, setup-to-dist, gdb-XXX.tar.Z): New rules for building distributions. Normal distribution is built by doing `make -f Makefile.in gdb.tar.Z' in the directory one level up from here; it calls make-proto-gdb.dir to build a directory `proto-gdb' which is an image of the release. The old `gdb.tar.Z' rule still works too. * config.sub, configure: Roll in latest from .. Thu Sep 19 17:41:24 1991 Roland H. Pesch (pesch at cygnus.com) * doc/gdbint.texinfo: Reorder contents; reorganize new-host, new-target, and new-config chapters; fix minor typos; come closer to usual GNU markup conventions for @file @samp @code @var. Thu Sep 19 17:04:12 1991 Per Bothner (bothner at cygnus.com) Patches from Peter Schauer : * mipsread.c (parse_partial_symbols): Enter the name of all structs/unions... into the psymtab so we can access them if the symtab is not read in. * mips-tdep.c: Remove some unneeded #includes. * xconfig/dec3100: Add HAVE_STRSTR. Thu Sep 19 15:14:23 1991 John Gilmore (gnu at cygnus.com) * Makefile.in: Circumvent Sun Make bug on *-exp.tab.o. * c-exp.y, m2-exp.y: Lint. * m2-exp.y: Avoid using yytname[] which is a Bison-ism. * valprint.c (val_print_fields): Check for stub type. * mipsread.c (_initialize_mipsread): Avoid using builtin_type_void at initialize time. (mipscoff_symfile_read): use it now. Wed Sep 18 15:55:51 1991 John Gilmore (gnu at cygnus.com) Merge multiple-language support, and partial Modula-2 support, from Andrew Beers . * i387-tdep.c: New file, consolidates most 80387 support, and eliminates host dependency on double<->extended conversions. * i386-xdep.c, symm-xdep.c: Remove most 387 support. * xconfig/i386{sco,v,v-g,v32,v32-g}: Now need i387-tdep.o. * symfile.c (allocate_symtab): New fn, consolidates the work of allocating and initializing a new struct symtab. Set the language of the symtab based on its filename extension. * symfile.h: Declare it. * mipsread.c (new_symtab): Use it. Minor formatting changes. * dbxread.c (end_symtab): Use it. * mipsread.c (parse_symbol, case stParam and stProc): Add #if 0'd code for saving types of parameters with each function definition. * dbxread.c (define_symbol, function and parameter cases): Ditto. (read_dbx_symtab, case N_DEFD): Ignore. (read_enum_type): Recognize FALSE/TRUE enum as Modula-2 BOOLEAN. (read_range_type): Rename MAX_OF_TYPE to MAX_OF_C_TYPE, etc. #if 0 out its uses, though, since they set a dead value. * coffread.c (end_symtab): Use allocate_symtab. (process_coff_symbol): #if 0'd for functions and params as above. (read_enum_type): Recognize Modula-2 BOOLEAN. * symtab.c (add_param_to_type): #if 0'd function to add a parameter type to a function type's field list. * defs.h (local_hex_format, local_hex_string, *_custom): Add. * i386-xdep.c, pyr-tdep.c, pyr-xdep.c, remote-vx.c, solib.c, source.c, symfile.c, dbxread.c, breakpoint.c, core.c, exec.c, i387-tdep.c, infcmd.c, mips-tdep.c, stack.c, printcmd.c: Output hex with local_hex_string for Modula-2 support. * breakpoint.c (breakpoint_cond_eval): Use new value_true to test breakpoint condition language-independently. * parse.c: New file with the common code remains of expread.y. * parser-defs.h: New file with common declarations from expread.y. * c-exp.y: New file with the C parser from expread.y, and other language-specific information. * m2-exp.y: New file with the Modula-2 parser and etc. * expread.y, expread.tab.c: Remove. * breakpoint.c, eval.c, printcmd.c, expression.h: Use parse_expression and parse_exp_1 rather than parse_c_expression and parse_c_1. * symtab.h (enum languages): Move to defs.h. (enum type_code): Add TYPE_CODE_CHAR and TYPE_CODE_BOOL. Declare Modula-2 builtin types. Add MAX_OF_TYPE and MIN_OF_TYPE macros. * symtab.c (_initialize_symtab): Remove builtin type definition and initialization to *-exp.y. (lookup_primitive_typename): Use language-dependent vector. (lookup_typename): Fix bug, make it work if primitive typename. (lookup_unsigned_typename): Call above. (create_array_type): Set up range type for array index. (list_symbols): Call typedef_print to print typedefs. * values.c (unpack_long, value_from_longest): Handle TYPE_CODE_BOOL and TYPE_CODE_CHAR. * expression.h (enum exp_opcode): Add Modula-2 specific opcodes. * expprint.c: Look up expression opcodes in language-specific table, based on expression's language. Handle some Modula-2 specific opcodes. * stack.c (frame_info): Print language of stack frame. (select_frame): Also select language, if in auto-mode. (get_frame_language): New subroutine. * main.c (execute_command): Warn as language changes automatically. * printcmd.c (ptype_command): Parse types using the language parser, both for language-independence, and so that scopes can be specified. * language.h, language.c: New files for language-specific macros, declarations, and definitions. Misc fixes: * main.c (main): If error() is called during early initialization, print its message and then exit(1) from GDB. * valprint.c (type_print_base): Avoid printing garbage for ints of unusual sizes. (_initialize_valprint): Warn about host/target size assumption; improve long long support slightly. * convex-tdep.c (comm_registers_info): Avoid parsing decimal and hex -- let parse_and_eval_address do it. * doc/gdbint.texinfo (Languages): Doc how to add a language. * Makefile.in: Cope with new files and removed files. Tue Sep 17 08:37:41 1991 John Gilmore (gnu at cygint.cygnus.com) Add Andrew Beers' changes for Modula-2 support. His ChangeLog entries are enclosed herein. Not all of these changes have been merged into the master GDB sources -- check the ChangeLog above here for the merge log. Mon Jun 3 17:05:45 EDT 1991 m2-exp.y Created. Tested outside of GDB for a few days. Proper operators were added, C specific operators and tokens removed. yylex() revamped to some extent. Still things missing from the grammar, such as sets. Tested for two weeks in GDB v3.5. Tue Jun 11 17:23:48 EDT 1991 m2-exp.y Added boolean constants TRUE and FALSE to the grammar so they are built-in. Sort of a hack. Fri Jun 14 12:53:51 EDT 1991 m2-exp.y Added range checking for numeric constants. Any numeric constant is assumed to be of builtin type INTEGER unless: (1) it is octal or hexadecimal, in which case it is a CARDINAL; (2) it is too big to fit into an INTEGER, in which case it is a CARDINAL. eval.c Added simple range checking for +, -, and * on integers. Doesn't work very well for *, since 6 * 1,000,000,000 = 1,705,032,704, which fails the simple test of result >= first_operand, no matter in what order the operands are. Tue Jun 18 14:11:30 EDT 1991 Broke the parser into parts, one containing the C grammar and the other containing code to be shared by all of the grammars. The following files no longer exist: expread.y expread.tab.c The following files were added: c-exp.y (The C grammar) m2-exp.y (The Modula-2 grammar) parser-code.c (Code that is shared by the above grammar) parser-code.h parser-defs.h Makefile.dist Changed to reflect the above dependencies. NOTE: It is now necessary to use the Bison compiler compiler, since it will generate function/variable prefixes other than yy. Tue Jun 18 16:47:49 EDT 1991 symtab.[ch] Added the external variable working_lang, than holds the value of the current working language. Added the ennumerated type language_mode, with the values language_auto and language_manual, the former meaning that GDB sets working_lang as needed, and the latter meaning that the value of working_lang is totally under user control. symtab.[ch] Added the Modula-2 pervasive types INTEGER, CARDINAL, REAL, BOOLEAN and CHAR. Also added the type codes TYPE_CODE_BOOL and TYPE_CODE_CHAR. utils.c Added set_language_command and show_language_command to implement the GDB support commands "set language" and "show language". expression.h A number of identifiers were added to the type exp_opcode to facilitate Modula-2 builtin functions, integer division, and array indexing. Wed Jun 19 13:25:58 EDT 1991 language.h Added the macro STRICT_TYPE, which evaluates to non-zero if the language specified by working_lang requires the use of strict typing of expressions. Eventually, even this will be able to be changed by the user. Added the macro RANGE_CHECK, which evaluates to non-zero if the language specified by working_lang requires the checking of a value against the domain of its type. Eventually, even this will be able to be changed by the user. language.[ch] Predicates involving types (simple_type, ordered_type, same_type, integral_type, numeric_type, character_type, boolean_type, float_type) are added. These predicates are based on the current value of working_lang, and are handy in type-checking. Wed Jun 19 15:39:34 EDT 1991 eval.c Added the function type_array_rank which computes the rank of an array type. valarith.c Added the funtion value_bool, which when given a integer value.h value (ie. struct value *) as an argument, it returns a boolean value (ie. struct value *) true if that integer is non-zero, and a boolean value false otherwise. valprint.c Added cases for TYPE_CODE_BOOL, so Modula-2 BOOLEAN values will print out properly. Wed Jun 19 16:36:34 EDT 1991 valops.c Added the function value_capitalize, which returns it value.h argument capitalized if its argument is a lowercase letter, or the argument unchanged if its argument is not a letter. valarith.c Added the function range_check_p, which returns non-zero value.h if its value argument is between the integral bounds upper and lower. Added the function range_check_enum_p, which makes sure that its value argument is a valid member of the domain of its type argument. Added the function range_check_range_p, which makes sure its value argument lies between the upper and lower bounds of its type argument, which must be a ranged type. Added the function check_array_index, which range and type checks an index of an array. Added the function value_multi_subscript, which computes array[idx1,idx2...idxN], given a value array and an array of values representing indicies. values.c Changed value_from_long to work with TYPE_CODE_CHAR and unpack_long to work with TYPE_CODE_BOOL and TYPE_CODE_CHAR. Wed Jun 19 18:04:08 EDT 1991 symtab.c Stored pervasive types in a structure and make lookup_pervasive_type() a lookup function that was based on working_lang. If lookup_pervasive_type() returned non-zero, then that value was returned (a fix, since before it simply wouldn't return the pervasive type.) language.h Added the macro CAST_IS_CONVERSION, which evaluates to non-zero if the language specified by working_lang means "conversion" when it says "cast". valops.c Added the function value_real_cast(), which performs a value.h *cast*, not a *conversion*, which is what value_cast() does when it can. In particular, value_cast(,4) = 4.0, while value_real_cast(,4) = some mess. eval.c Modula-2 builtin functions implemented: ABS, CAP, CHR, parser-code.c FLOAT, HIGH, MAX, MIN, ODD, ORD, TRUNC, and VAL. expression.h Added macros MAX_OF_TYPE and MIN_OF_TYPE to work with MAX and MIN on integral types. *NOTE*: These are currently hardcoded to work only if there are 8 bits per storage unit. FIXME. eval.c Made logical functions call value_bool to return a properly typed boolean value, based on working_lang. Thu Jun 20 11:55:27 EDT 1991 valprint.c Types now print out in a Modula-2 fashion. This works for the cases when the type is printed out step-by-step, that is, it doesn't work when the name of a structured type (which includes the keyword "struct", etc.) is simply displayed. FIXME: Perhaps this is bad. Parts of it seem to kludgey, since type specifications in C and Modula-2 are very different. The C printing of a type is very recursive, whereas in Modula-2 it is generally very simple. C has type prefixes and suffixes, which have no real analogue in Modula-2. Maybe type_print() should call a language specific type printer. This is also advantageous if we compile GDB to exclude some of the languages. We'll just leave those functions out. Thu Jun 20 16:57:10 EDT 1991 dbxread.c When reading the complete symbol table in (via psymtab_to_symtab()), the number and types of function arguments are added to a function type. define_symbol() calls add_param_to_type() to accomplish this. Assumption: when we come across a function definition (N_FUN symbol with an 'f' or 'F' in the name), its arguments will appear before another function definition. When a function is found, a pointer to its type is placed in the global in_function_type. Changes that add_param_to_type() makes are to this global. valprint.c The type of a function now includes (for Modula-2) the types of its parameters. eval.c Type checking and a check for the proper number of arguments is now done for function calls. Not sure of the impact this has on C++ member function yet. Thu Jun 20 19:58:48 EDT 1991 valprint.c Rewrote the type printer. Broke it into two language specific parts, adding the functions type_print_m2() and type_print_m2_1(). An unfortunate consequence is this: if you debugging a C program in Modula-2 mode (why?), info types does not work well with regular expressions, since the types are printed out in Modula-2 terminology, but stored in C terminology. language.[ch] Added the functions new_type_last(), type_keyword(), and type_sep() to aid in the printing of typedefs. symtab.c Made the printing of typedefs as language independent as possible through calls to new_type_last(), type_keyword(), and type_sep(). Fri Jun 21 11:50:26 EDT 1991 dbxread.c Check all incoming ennumerated types. If it looks like Modula-2's BOOLEAN type, then change the type_code of the type to TYPE_CODE_BOOL so we can process it as a boolean variable. valprint.c Replaced some of the 0x%x with calls to sprintf and hexformat() in val_print(). language.[ch] Added the function hex_to_string(), which converts its integral argument to a hexadecimal number (format is language based) and returns the result as a string. Mon Jun 24 12:25:07 EDT 1991 valprint.c Some functions call type_print_1() directly, instead of value.h using type_print(), so they can specify where (column) to print things. Since type_print() takes care of language dependence, that needs to be called first. Added a parameter depth to type_print() (so it is now like type_print_1). Changed type_print to type_print_at, and made type_print a macro that passes a depth argument of zero. symmisc.c Changed all calls to type_print_1 to calls to type_print_at. Makefile.dist Made it possible to build GDB for a specific set of depend languages. Do this by passing a definition for the macro LANGS to make. LANGS should be a string containing a space-separated list of language names (ie. LANGS="c m2"). The default is to build all languages. Note that grammar files must follow the naming convention of -exp.y. gdb.lang This holds the current value of the LANGS macro. It is examined every time make is called, and is updated if necessary. eval.c Added #ifdef _LANG_ to these files. expread.c Still need to add them to dbxread.c and coffread.c. main.c source.c symtab.c utils.c valarith.c valprint.c Mon Jun 24 16:33:11 EDT 1991 language.[ch] Added the functions hexformat_pre() and hex_to_string_pre(), which take a prefix argument to include in the format string. Thus, hexformat_pre("08") will return "0x08x" (if the working language is language_c). Made hexformat() and hex_to_string() calls to the above with "" as the prefix argument. am29k-pinsn.c, arm-pinsn.c, breakpoint.c, convex-tdep.c, exec.c, core.c, dbxread.c, i386-pinsn.c, i386-stub.c, i386-xdep.c, i960-pinsn.c, infcmd.c, inflow.c, m68k-pinsn.c, m68k-stub.c, m88k-pinsn.c, mips-pinsn.c, mips-tdep.c, ns32k-pinsn.c, printcmd.c, pyr-pinsn.c, pyr-tdep.c, pyr-xdep.c, remote-vx.c, remote.c, solib.c, source.c, stack.c, sun386-xdep.c, symfile.c, symm-xdep.c, symmisc.c, tahoe-pinsn.c, valprint.c, vax-pinsn.c Changed all occurences of 0x%[0-9]*l*x in printf format strings to calls to hexformat() and hex_to_string(). Format strings without the leading "0x" were ignored. depend Updated to take the above into account. Tue Jun 25 15:27:18 EDT 1991 symtab.h Added the types range_mode_t, range_check_t, type_mode_t, and type_check_t to keep track of the current state of range and type checking. main.c Added the variables range_mode, range_check, type_mode, and type_check to record the current state of range and type checking. Added initialization code to main(). language.h Changed the macros STRICT_TYPE and RANGE_CHECK to examine the above variables. Tue Jun 25 17:57:08 EDT 1991 dbxread.c process_one_symbol() updates the variable (enum language) source_lang based on the extension of the filename contained in the N_SO sybmol that started this symtab. When end_symtab() is called, the value of source_lang is put into the language field. stack.c select_frame() sets working_lang (and possibly type_check and range_check) to the language field of the symtab associated with the frame that is selected if working_mode is language_auto. If working_mode is language_manual, a warning is printed and working_lang is not set. language.c Added the function set_type_range(), which sets the value of type_check and range_check (if their modes call for automatic setting) based on the current value of working_lang. A non-zero argument will cause the current settings to be output. Wed Jun 26 14:51:40 EDT 1991 eval.c Added range checks on assignment. m2-exp.y Added the grammar for sets to the language. Currently, these do not do anything except print an error message. Wed Jun 26 17:01:04 EDT 1991 m2-exp.y Added the ability for parse_number() to parse negative numbers. A global flag is set upon encountering a unary minus. This was done to make, for example, 1 parse as a CARDINAL, and not as an integer, per Wirth's examples in Programming in Modula-2 ed.4. valprint.c Added support for "set radix 2" by then setting output_format to 't'. eval.c Implemented range checking on subrange types. Added calls to range_check_range_p for BINOP_ASSIGN and BINOP_VAL. Implemented MIN and MAX for ennumerated types. The minimum value of an ennumerated type is defined by Wirth as the first identifier, and the maximum as the last. m2-exp.y Made octal numbers ending with "B" be characters and those ending with "C" be numbers, per Wirth's book. (p. 34) Thu Jun 27 14:11:52 EDT 1991 stack.c select_frame() now only sets working_lang, it does not notify the user. If working_mode is language_manual, then a warning is issued once. main.c At the end of each call to execute_command(), working_lang is checked against the local static (enum language) current. If they differ and working_mode is language_auto, the new settings of language, type and range checking are printed out. stack.c Modified frame_info() to include the language of the current frame in the output of "info frame". language.[ch] Added the function language_str() which returns the name of the current language. Fri Jun 28 15:33:14 EDT 1991 m2-exp.y Added the built-in procedures INC, INCL, DEC, and DECL to the language. INCL and DECL currently cause an error, since sets are not implemented yet. INC and DEC are implemented as PREINCREMENT/PREDECREMENT with one argument, and as ASSIGN_MODIFY with two arguments. eval.c Added type checking to the above cases. value.h Added not_lval_constant to the lval_type ennumerated type. not_lval_constant means that the value is a constant value; that is 3 or 'a' or TRUE, not as in a constant identifier. This is used to help coerce numbers such as 3 to either signed or unsigned numbers. valops.c Added the function value_coerce_constants() which coerces constant integers as following: if one is a constant and the other is not, the constant's type is set to the type of the other argument. If both are constants and one is signed, the other is converted to a signed constant. Sat Jun 29 17:26:29 EDT 1991 valarith.c Added a better range checker. It now checks range (successfully) on integral operations [+-] (signed and unsigned) for any C sized type. Still does not work well for multiplication.) int_in_size() returns an integer that is coerced to fit into specified number of bytes. Mon Jul 1 13:04:14 EDT 1991 language.[ch] Added the function binop_result_type(), which returns the builtin (struct type *) type that would be the result of a binop on the two values V1 and V2. Wed Jul 3 19:22:53 EDT 1991 source.c Extended source_info() to include the source language in the output from "info source". Fri Jul 5 13:48:52 EDT 1991 utils.c Moved the support functions for the GDB set/show commands dealing with language into language.c. language.c Added the function language_info(), which displays info about the current working language, type and range check settings. Called via the GDB command "info language". Added an initialization routine _initialize_language(), that sets defaults for the language, type and range variables and sets up the new GDB commands. main.c Language setup moved to language.c. depend Rebuilt. Mon Jul 8 10:10:22 EDT 1991 valarith.c Debugged the range checker for arithmetic. Still does not work for multiplication very well. Mon Jul 8 12:40:37 EDT 1991 language.[ch] Added the function value_true() which returns non-zero if its argument represents a boolean true value. breakpoint.c Changed breakpoint_cond_eval() to call value_true() to check the truth of an expression. Thu Jul 11 12:51:34 EDT 1991 language.[ch] Added the predicate structured_type(), which returns non-zero if the argument is a structured type. Added the predicate pointer_type(), which returns non-zero if the argument is a pointer type. eval.c Added the ability to do addition and substraction on pointers and integers. This case simply bypasses the type checker. Thu Jul 11 14:41:42 EDT 1991 include/stab.def Added the symbol N_DEFD (0x4a) which is a definition module dependency that is used by the GNU Modula-2 compiler and the linker. It is not important to GDB, except that [dbx|coff|mips]read.c should ignore these symbols. Fri Jul 12 16:07:00 EDT 1991 valprint.c Changed the TYPE_LENGTH(type) >= 0 to TYPE_LENGTH(type) > 0 in val_print(). Also added statements to the else part to coerce type (argument to val_print) to a pointer type if it is an "array of unspecified length". valops.c Added the function value_m2_string(), which returns a (value) value which is a constant string, whose type is (ARRAY [0..n] OF CHAR). The length field of the type structure is set to zero, so it will be interpreted as an "array of unspecified length". stack.c Moved the language/frame mismatch check to main.c:execute_command(). main.c The working language is recorded each time execute_command() is executed. If working lang has changed during its execution, then the new language/type/range info is printed out for the user. If the working language does not match the language of the frame, a warning is issued. Sat Jul 13 16:16:39 EDT 1991 eval.c Moved all the type-checking stuff for operators to language.[ch] language.c. This is so we can keep language-specific stuff (like for what type operators are defined) in language.c. language.[ch] Added the function binop_type_check(), which checks to see if its two (value) arguments are type-compatible with its opcode argument. The opcode should represent an operation involving an operator. Also added the macro function unop_type_check, which calls binop_type_check with a NULL second argument. expprint.c Added Modula-2 operators to the op_print_tab, so info expression.h break works correctly. Also added "op_string", which returns the string corresponding to the (enum exp_opcode) opcode that is its argument. Sat Jul 13 18:26:18 EDT 1991 coffread.c Added code to record the type of function arguments with each paricular function. Code is very similar to that added to dbxread.c. dbxread.c Moved add_param_to_type() to symtab.c symtab.[ch] Added function add_param_to_type() from dbxread.c *** NOTE: The above additions have not been tested. Mon Jul 15 12:50:47 EDT 1991 langauge.[ch] Added the functions type_error and range_error, which work like error() except if the type/range mode is set to *_mode_warn, then they do not do a return_to_top_level(), but merely print a warning. Also changed [set|show]_[type|range]_command() to support the new "warn" feature. Thu Jul 18 17:50:54 EDT 1991 mipsread.c Added code to record the type of function arguments with each particular function. Code is very similar to that added to dbxread.c. *** NOTE: The above additions have not been tested. Fri Jul 19 11:19:10 EDT 1991 defs.h Added macros MAX_OF_SIZE, MIN_OF_SIZE, UMAX_OF_SIZE, and UMIN_OF_SIZE, which when given a size of a numeric type, return the maximum and minimum value it can hold. UMAX... and UMIN... return the result for unsigned types. symtab.h Added the macros MAX_OF_TYPE and MIN_OF_TYPE to operate on struct types. They call above macros. dbxread.c Renamed the MAX and MIN_OF_TYPE macros to ..._OF_CTYPE to avoid a name conlict with the above. c-exp.y Added range checking on numeric constants in parse_number() for completeness. valarith.c Made binop_user_defined_p() and unop_user_defined_p() return 0 if working_lang is not language_c. Thu Aug 8 14:17:22 EDT 1991 main.c printcmd.c breakpoint.c Documentation strings of some commands changed to eliminate the references to the C language where appropriate. Tue Aug 13 15:48:03 EDT 1991 m2-exp.y Added qualified identifiers to the grammar. The semantics are slightly different from those of the GDB operator :: c-exp.y m2-exp.y Added a rule to each grammar of the form: start ::= exp | type_exp, where type_exp is any valid type expression. expression.h eval.c Added the opcode OP_TYPE, and an error case in eval.c. printcmd.c Modified ptype_command() so it actually parses the input (necessary for type expressions with scope qualifiers). Added the function ptype_eval() which expects an expression composed of one OP_TYPE element. *.[ch] Replaced all occurences of parse_c_expression with parse_expression *.[ch] Replaced all occurences of parse_c_1 with parse_exp_1 [End of ChangeLog entries from Andrew Beers for Modula-2 support.] Mon Sep 16 17:19:46 1991 John Gilmore (gnu at cygnus.com) Small fixes from Peter Schauer: * infrun.c (child_attach): Lint. * solib.c (find_solib): Handle shared libs version 2. Small fixes from David Wood: * xm-ultra3.h (SYS_SIGLIST_MISSING): Typo. Small fixes: * remote-vx.c: Move to top, for FILE. Fix from John S . * utils.c (wrap_here): Avoid wrap action of fputs_filtered if chars_per_line is at maximum (user typed `set width 0'). Fix from Andreas Schwab . Tue Sep 17 17:31:04 1991 Stu Grossman (grossman at cygnus.com) * coredep.c: include ptrace.h where necessary. * mipsread.c(parse_lines): fix unsigned char problem that was messing up line numbers on SGI's and possibly other MIPS based platforms. * infrun.c (child_create_inferior): use better test to check return val from setpgrp(). * tm-irix3.h, xm-irix3.h, tconfig/irix3, xconfig/irix3: add these for sgi/irix support. Wed Sep 18 04:33:31 1991 Per Bothner (bothner at cygnus.com) * mipsread.c (parse_symbol): Put non-static procedures in the global block. Fri Sep 13 00:14:52 1991 John Gilmore (gnu at cygnus.com) Patch together `text_start' and `text_end' for 29K port. * exec.c (exec_command): If NEED_TEXT_START_END, define the variables and set them based on the exec file. * am29k-tdep.c: declare text_start. * valops.c (call_function_by_hand): declare text_end. * inferior.h: Eliminate CANNOT_EXECUTE_STACK in favor of defining CALL_DUMMY_LOCATION as BEFORE_TEXT_END. This is because machines that do this will also have to know to set NEED_TEXT_START_END. Besides, it was a redundant way to say the same thing. * tm-29k.h, tm-convex.h, tm-np1.h: Eliminate CANNOT_EXECUTE_STACK, define CALL_DUMMY_LOCATION and NEED_TEXT_START_END. Thu Sep 12 00:22:24 1991 John Gilmore (gnu at cygint.cygnus.com) AMD 29000 changes from David Wood : * Makefile.in (CLIBS): Put XM_CLIBS and TM_CLIBS at end. Pass MUNCH_DEFINE to munch whenever we run it. * am29k-pinsn.c (print_insn): Handle NOP specially. Avoid %#x format string; use 0x%x instead. * am29k-tdep.c: Use DUMMY_SAVE_GREGS and RETURN_REGNUM. * ultra-xdep.c, xm-ultra.h: New files for Ultracomputer host system. * xm-rtbsd.h: New host support for RT/PC running BSD Unix. * inflow.c: Handle `short' process group IDs. * infptrace.c (fetch_register): Support CANNOT_FETCH_REGISTER, and check for ptrace errors. * coffread.c (SDB_REG_TO_REGNUM): Define if not already. (coff_symfile_init): Initialize text_bfd_scnum. (read_coff_symtab): Use it to find the text [and absolute?] sections. * ../config.sub: Add vendor nyu and os "sym[1-9]*". * configure.in: Add hosts rtpc-*-* and a29k-*-*. Merge target arm case with other "easy" cases. Add target cases a29k-*-none (rehack of am29k), a29k-*-kern (remote to Ultracomputer kernel), and a29k-*-sym1 (ultracomputer OS's user process). * minimon.h, remote-adapt.c, remote-mm.c: Add. * munch: Cope with RT/PC putting fns in data segment. Restore ability to override `nm' by specifying MUNCH_NM. * xconfig/rtbsd, xconfig/ultra3: New host systems. * tconfig/a29k: Rename from tconfig/am29k. Add remote-mm and remote-adapt. Remove encapsulated coff #define's (the support should go in BFD, and gdb shouldn't know or care). * tconfig/a29k-kern: Same, but for remote kernel debugging. * tconfig/ultra3: For debugging user processes on Ultra3/Sym1. * tm-29k.h: Update BADMAG (though it should go away). Allow the register definitions to be overridden in another tm-file. Fix SR_REGNUM. Add a mess of _REGNUM's. Separate RETURN_REGNUM from GR96_REGNUM and DUMMY_SAVE_GREGS from DUMMY_SAVE_GR96, for handling kernel calling conventions that use GR64+ rather than GR96+. * tm-ultra3.h: New file, for use on Ultra3 Unix as well as for remote debugging of Ultra3 kernel. Includes tm-29k.h and overrides various things. * remote-mm.c (mm_attach, mm_wait): Handle attach like child_attach does, making a clean stop in the newly attached program. * remote-eb.c: Lint. * coffread.c: Make coffread independent of any particular variant of COFF. Avoid #include-ing any particular one except internalcoff.h. BFD now passes key values for symbol reading as part of its coff_data structure (LINESZ, SYMESZ, AUXESZ, and the symbol masks and shifts); use them. Remove obsolete end_of_text_addr. * exec.c: Remove unused include files. Wed Sep 11 19:38:44 1991 John Gilmore (gnu at cygint.cygnus.com) * Makefile.in (documentation targets): Pass $(M4). Bugfix from eggert@twinsun.com (Paul Eggert). * stack.c (down_silently_command): Check for stack existence. Tue Sep 10 23:08:29 1991 John Gilmore (gnu at cygint.cygnus.com) * Makefile.in (VERSION): Update to 4.0.3. Tue Sep 10 09:19:29 1991 John Gilmore (gnu at cygint.cygnus.com) * core.c (core_file_command): Print frame at coredump with its level number, by calling print_stack_frame. * frame.h: Add selected_frame_level, print_stack_frame. * frame.h, stack.c: Remove print_sel_frame, print_selected_frame. * convex-tdep.c, convex-xdep.c, infcmd.c, inflow.c, infrun.c: Change print_sel_frame and print_selected_frame callers to print_stack_frame. * dbxread.c (read_ofile_symtab): Avoid empty else clause. * symfile.c (free_named_symtabs): Ditto. * main.c (main): wrap_here needs an arg. * solib.c (find_solib): Avoid memory access if _DYNAMIC is zero. (solib_add): Avoid noise. (solib_create_inferior_hook): Lint. (sharedlibrary_command): Move dont_repeat to here. * utils.c (error): Call wrap_here to force buffered output. Small patches from Peter Schauer: * coffread.c (start_symtab): Free any existing line_vector before malloc-ing new one. (read_coff_symtab): Ditto for type_vector. * source.c (lines_to_list): New variable, replacing function. (all uses): Use as variable. (_initialize_source): Add 'set listsize' and 'show listsize'. * utils.c (lines_to_list): Remove function. * stack.c (print_frame_info): Use as variable. * defs.h (lines_to_list): Remove declaration. Mon Sep 9 13:45:57 1991 John Gilmore (gnu at cygint.cygnus.com) * breakpoint.c (insert_breakpoints): Restore warning about the program might be running in another process, but only for systems with this brain death (#ifdef ONE_PROCESS_WRITETEXT). * xm-hp300bsd.h, xm-mips.h, xm-vax.h: Define it. * utils.c (error): if error_pre_print is set, print the string first. * main.c (main, print_gnu_advertisement, print_gdb_version): Reformat legalese so it always prints, but acts as an "I'm here" message while symbols are being read. If any errors occur, print a few newlines to set off the message and start it at the left margin. Remove mention of "help" command, and don't yak about symbol reading. (catch_errors): Error string is now printed first in case of error, not last. * command.c (undef_cmd_error, lookup_cmd): On undefined command, suggest the "help" command. * Makefile.in (VERSION): Set to 4.0.2. Thu Sep 5 23:49:48 1991 John Gilmore (gnu at cygint.cygnus.com) * .gdbinit: Remove useless "rr" command. Set complaints to 1 for people debugging gdb. * breakpoint.c, remote-vx.c: Reword strings printed by catch_errors callers. Wed Sep 4 11:07:50 1991 John Gilmore (gnu at cygint.cygnus.com) * WHATS.NEW: "history write -> history save". Doc "write on/off". (Fix from kenc@viewlogic.com.) Fix some infrastructure to be able to cope with host and target machines with different sized basic types (ints, ptrs, etc). (Idea from pierre@la.tce.com (Pierre Willard).) * values.c (value_from_longest): Rename from value_from_long. Handle pointer types as well as integers, so that targets with different pointer sizes from the host can be accomodated. * breakpoint.c, convex-tdep.c, eval.c, expprint.c, printcmd.c, valarith.c, valops.c, valprint.c, value.h, values.c: Rename uses of value_from_long to value_from_longest. * eval.c, findvar.c, printcmd.c, valarith.c, valops.c: Pass the correct pointer type to value_from_long{est}. * doc/gdb.texinfo ($_, $__): Describe types of these variables. * remote-vx.c: Remove obsolete code for calling functions via vxworks kludge interface (it referenced value_from_long). * valops.c (value_string): Find malloc with lookup_misc_func, not raw search. Tue Sep 3 18:37:46 1991 John Gilmore (gnu at cygint.cygnus.com) Make writing to files work properly. (Fixes to BFD are also needed.) * core.c (core_open): Open file ourselves, read or r/w, depending on write_files. Use bfd_fdopenr. * gdbcore.h (write_files): New variable. * exec.c (write_files): Define variable, add set&show for it. (exec_file_command): Use write_files to open for read or r/write. Make shared library reading happen automatically. These changes are mostly from Peter Schauer . * inferior.h (stop_soon_quietly): Add to exported variables. * infrun.c (child_create_inferior): call solib hook, if defined. (child_attach): call solib hook, if defined. * solib.c: Include inferior.h. Add from_tty to so_list as kludge. (find_solib): Use lookup_misc_func rather than hand-rolled. (symbol_add_stub): New stub for catch_errors. (solib_add): Avoid output if !from_tty. Catch errors rather than just calling symbol_file_add and bombing. (solib_create_inferior_hook): Interface with the target process to let it read and alloc shared libs, then figure out what it did. * core.c (validate_files): Fix typo, soften warning. (Fix from Hiroto Kagotani .) * utils.c (fputs_demangled): Avoid duplicate printing if demangling is off. (Fix from J.T. Conklin .) * infrun.c (proceed): Cast -1 to (CORE_ADDR) before comparing. (Fix from pierre@la.tce.com (Pierre Willard).) * main.c (catch_errors): Change argument to a char * from an int, since a char * can point to a struct full of glop, but an int is not guaranteed to be able to hold a pointer. * breakpoint.c (breakpoint_cond_eval, bpstat_stop_status, breakpoint_re_set_one, breakpoint_re_set): Adapt. * core.c (core_open, solib_add_stub): Adapt. * remote-vx.c (symbol_stub, add_symbol_stub, callers): Adapt. Wed Aug 28 18:18:05 1991 John Gilmore (gnu at cygint.cygnus.com) * Makefile.in: Update VERSION to 4.0.1. Evade GNU Make bug by adding .NOEXPORT target. Fri Aug 23 17:14:25 1991 John Gilmore (gnu at cygint.cygnus.com) * GDB-4.0 release! * Update README. * Makefile.in (VERSION): Roll to 4.0. (gdb.tar.Z): Make refcard.ps as well, for shipment. Fri Aug 23 14:07:09 1991 Roland H. Pesch (pesch at cygint.cygnus.com) * doc/gdb.texinfo: minor rewordings, crossref to ptype from print, more on printsyms. * doc/Makefile, Makefile.in: generate "gdb-all.texi" rather than "gdb-all.texinfo" * doc/rdl-apps.texi: renamed from rdl-apps.texinfo * Makefile.in, doc/Makefile, doc/.Sanitize, doc/gdb.texinfo: reflect above name change * WHATS.NEW: correct pointer to refcard. * doc/gdb.texinfo: update New Features, Installing * doc/gdbint.texinfo: add short description of configure +template Fri Aug 23 11:46:08 1991 Roland H. Pesch (pesch at cygint.cygnus.com) * doc/gdb.texinfo: update, fix bugs in "Installing" appendix Fri Aug 23 01:02:00 1991 John Gilmore (gnu at cygint.cygnus.com) * Makefile.in: Add config.sub, make doc/rdl-apps.texinfo for tar file, add dependencies for referenced doc files. Thu Aug 22 22:17:06 1991 Stu Grossman (grossman at cygint.cygnus.com) * coffread.c, symfile.c, stack.c: saberized. Thu Aug 22 16:20:27 1991 Roland H. Pesch (pesch at cygint.cygnus.com) * doc/refcard.tex: permuted Essential Commands sec * doc/gdb.texinfo: new C++ chapter; revised installation appendix; new doc for set/show symbol-reloading default set complaints 0 info all-registers RET-repeat disabled after prompted long displays processID (attach) interpretation of 2nd GDB cmdline arg Thu Aug 22 14:05:47 1991 Stu Grossman (grossman at cygint.cygnus.com) * expread.y, coffread.c, dbxread.c, target.c, mem-break.c, cplus-dem.c, values.c, valprint.c, symfile.c, remote.c, breakpoint.c, main.c: lint. Thu Aug 22 02:02:26 1991 John Gilmore (gnu at cygint.cygnus.com) Install new configuration scheme for GDB and friends. * config.sub: Translate ordinary names to three-part names. * configure: Use three-part names internally. * configure.in: Translate three-part names to filenames. * README, WHATS.NEW: Update for gdb-4.0. * Makefile.in: Roll VERSION to 3.99. Wed Aug 21 18:21:09 1991 John Gilmore (gnu at cygint.cygnus.com) * infptrace.c (KERNEL_U_ADDR_BSD): Include a.out.gnu.h. * i960-tdep.c, m68k-tdep.c, sparc-tdep.c, tm-i960.h, tm-m68k.h, remote-nindy.c: Change ext_format_XXX structs to single structures rather than arrays; when passing their address, use &. This avoids trouble with bdead compilers. * mcheck.c: Don't include ; just declare "void abort();" instead. This avoids portability headaches. * mips-tdep.c (mips_do_registers_info): Only print FP regs if asked to. * source.c (open_source_file): Avoid ANSI const bdeath by skipping declaration and then casting result value. * tm-hp300bsd.h: Clarify comment. * utils.c (strstr): Result is const char *; ANSI bdeath. * xm-hp300bsd.h: Define HOST_BYTE_ORDER. Redefine INT_MIN, since system include file defines it differently from "defs.h", though the two are equivalent for our purposes. * tconfig/hp300bsd: Add m68k-tdep.o. Tue Aug 20 16:01:11 1991 John Gilmore (gnu at cygint.cygnus.com) * tconfig/sun*4: Remove warnings about system assembler. Mon Aug 19 13:44:46 1991 John Gilmore (gnu at cygint.cygnus.com) * mcheck.c: Avoid warning about undeclared abort fn. * tm-sparc.h (PC_ADJUST): Avoid calling error() from this; it causes recursive calls to error() when used in cleanups. To do so requires that we make it a function, so we do. * sparc-tdep.c (sparc_pc_adjust): New implem of PC_ADJUST. * utils.c (do_cleanups): Remove the current cleanup from the chain *before* calling it, in case error() is called from it. The result won't be pretty, but won't be an infinite loop either. Mon Aug 19 00:41:04 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * dbxread.c (read_struct_type): Grok anon structs for C++. (vb_name, vptr_name): Null terminate these strings. Fri Aug 16 08:31:03 1991 John Gilmore (gnu at cygint.cygnus.com) Minor bug fixes from BSD Net2 gdb: * blockframe.c (get_prev_frame_info): If FRAME_CHAIN_COMBINE returns 0, there is no previous frame. * breakpoint.c (commands_command): If !from_tty, don't call input_from_terminal_p(). * dbxread.c (record_misc_function): Speed up slightly. (compare_psymbols): Ditto. * infcmd.c (do_registers_info): Take a second argument to determine whether to print float registers. "info registers" does not do so anymore. "info all-registers" does, now. * mips-tdep.c, pyr-tdep.c (xxx_do_registers_info): Take second arg and ignore it. * tm-mips.h, tm-pyr.h (DO_REGISTERS_INFO): Pass second arg. * inflow.c (initialize_inflow): Set tflags_ours correctly. Other fixes: * breakpoint.c (bpstat_do_actions): Use a cleanup to restore executing_breakpoint_commands if we are interrupted by error. * coffread.c (init_lineno): Avoid problem with zero-sized linetab versus malloc/free. From: john@labtam.labtam.oz.au (John Carey). * core.c (solib_add_stub, core_open): Call SOLIB_ADD inside a catch_errors() so we can setup the frame regardless of whether the shared libs work. * ieee-float.c (double_to_ieee_extended): Get exponent from right place in little-endian systems. From John Carey. Thu Aug 15 18:43:57 1991 John Gilmore (gnu at cygint.cygnus.com) * main.c: Remove unused terminating_signals and catch_termination(). (long_options): Terminate with a zero element. [Bugfix from Atsuo Kawaguchi .] (gdb_readline): Make call-compatible with readline. (init_signals): Improve comments re vfork vs. signal. * utils.c (prompt_for_continue): Use new gdb_readline(). If we prompt for continuation, we don't let CR repeat the previous command, once we get back to a prompt. It's too easy to keep hitting CR, expecting "--more--" prompts, and have some long command start repeating on you. Tue Aug 13 16:17:56 1991 John Gilmore (gnu at cygint.cygnus.com) * blockframe.c (frameless_look_for_prologue): Speed up by calling SKIP_PROLOGUE_FRAMELESS_P if it's defined. * tm-sparc.h (SKIP_PROLOGUE, SKIP_PROLOGUE_FRAMELESS_P): Define two variants, one faster. * sparc-tdep.c (sparc_frame_chain): Use target_read_memory and return zero, rather than giving an error. (setup_arbitrary_frame): Initialize the PC in the new frame. (skip_prologue): Add a second arg saying whether we're just checking for a frameless function or not. * core.c (core_open, core_close, core_xfer_memory): Move section table pointers and bfd* into the target_ops. (core_open): Allow errors in shared lib reading, etc. (core_files_info): Describe shared library sections. * exec.c (exec_open, exec_close, exec_xfer_memory, xfer_memory, exec_files_info, set_section_command): Move section table pointers and bfd* into the target_ops. (add_to_section_table): Add BFD to section table. * target.c (target_xfer_memory, target_info): Pass target to xfer_memory and target_info functions. * target.h: '' * gdbcore.h: Move struct section_table. * target.h: New home of struct section_table. * solib.c (solib_add): New argument is the target_ops whose section list is to be added to, if any. Reallocate the sections in that target to add any that come from shared libs. (throughout) so_sections renamed to sections. (solib_xfer_memory): Deleted. * tm-sunos.h (SOLIB_ADD): Add target argument. (SOLIB_XFER_MEMORY): Delete. * core.c, exec.c, inftarg.c, remote-eb.c, remote-nindy.c, remote-vx.c, remote.c, target.c, target.h: Remove add_syms vector from target_ops. It's the same on all targets. Add two section pointers to target_ops. * stack.c (find_relative_frame): Dump ancient algorithm for "down", just use handy "next" pointers. (frame_command): Don't error if there is no stack; let user set one. * inflow.c (new_tty_prefork, new_tty): New prefork routine modifies static state in the parent process; new_tty itself runs in the child and modifies the child's file descriptors to match the saved static state. * infrun.c (child_create_inferior): Call new_tty_prefork, fork, then new_tty. * infptrace.c (child_xfer_memory): Add ignored target arg. * remote-eb.c (eb_xfer_inferior_memory): '' * remote-nindy.c (nindy_xfer_inferior_memory): '' * remote-vx.c (vx_xfer_memory): '' * remote.c (remote_xfer_memory): ''. Rename from remote_xfer_inferior_memory. * main.c (main): Only try to attach "corefile" argument if it starts with a digit. * symfile.c (symbol_reloading): New "set/show" variable. (symbol_file_add): Shorten message about symbol reading. (add_symbol_file_command): Merge with add_syms_addr_command, since this should work on all targets now. (stop_whining): Default to zero, to shut up complaints about bad symbol tables on many systems. (free_named_symtabs): Just exit unless symbol_reloading. * xm-sun3os4.h, xm-sun4os4.h: Define BROKEN_LARGE_ALLOCA, and add comment explaining shared library screw. * source.c: #if defined => #ifdef. Thu Aug 8 12:23:19 1991 John Gilmore (gnu at cygint.cygnus.com) * doc/gdbint.texinfo: Improve doc on porting to new OS's. Tue Aug 6 17:16:15 1991 Roland H. Pesch (pesch at cygint.cygnus.com) * doc/rdl-apps.texinfo: provide default readline-appendix finder (doc/Makefile knows how to make one for local config) * Makefile.in: use doc/Makefile for doc targets * doc/Makefile: GDB documentation now has its own Makefile doc/refcard.tex: renamed from "gdbrc.tex" doc/.Sanitize: add Makefile; recognize renamed refcard.tex doc/gdbint.texinfo: add markup in "Cleanups" chapter Fri Aug 2 00:13:06 1991 John Gilmore (gnu at cygint.cygnus.com) * values.c (baseclass_addr): When reading target memory, use the length of the basetype, not the upper type. We've only malloc'd enough space for the basetype, leading to errors in free(). * expprint.c (print_subexp): Print UNOP_MEMVAL of an OP_LONG that ends up as a function specially, since we know the actual type of the pointed-to address. This (somewhat) fixes display of expressions that include misc_function_vector names. Try `cond 1 !strcmp("a","b")' then `i b'. * infrun.c: Move DO_DEFERRED_STORES from proceed() to resume(). The child can be proceeded from inside wait_for_inferior in evaluating breakpoint conditions, and DO_DEFERRED_STORES was getting skipped in that case. * expprint.c (print_subexp): Use filtered output, since the subroutines we call use it, otherwise the output is horribly mangled, since output of wrappable stuff comes out late. * Makefile.in: Bump VERSION to 3.98.1 * infrun.c (child_create_process): Use execlp to find the shell to exec our target program. This requires some fiddling with `environ' since there is no execlpe(). Thu Aug 1 15:35:17 1991 Roland H. Pesch (pesch at fowanton.cygnus.com) * Makefile.in, doc/gdbrc.tex, doc/rc-* (new files): Minor rearrangement of refcard permits two new make targets-- gdbrc.dvi DVI output for refcard, using CM fonts gdbrc.ps PostScript refcard, using PS fonts Wed Jul 31 16:46:21 1991 John Gilmore (gnu at cygint.cygnus.com) * GDB-3.98 release. * TODO, Projects, WHATS.NEW, README: Update for gdb-3.98. * Makefile.in (gdb-all.texinfo): Avoid touching file if M4 dies. Wed Jul 31 16:35:58 1991 Roland H. Pesch (pesch at cygint.cygnus.com) * doc/gdb.texinfo: last changes for release. Minor typo and formatting fixes; incorporated most fixes remaining from filed mail commenting on earlier drafts. Added warnings: pipes don't work in run command; conditions are converse of assertions; step over fn without debug info goes to next fn; vars may have "wrong" values near fn entrance, exit Added example from Kingston on printing repeated nonadjacent values Added explicit mention that in Emacs gdb mode C-c and C-z are like shell mode for signals Renamed "Stepping and Continuing" to "Continuing and Stepping" so it doesn't sound so much like its parent "Stopping and Continuing"; also moved entries on continue to top of section, so they don't get lost. Improved installation directions in appendix, added manual formatting instructions Tue Jul 30 17:26:39 1991 John Gilmore (gnu at cygint.cygnus.com) * configure.in: Remove xm.h and tm.h even if we aren't linking new ones, so "./configure sun4; ./configure none" does the right thing. Assume that alldeps.mak and depend are already built in srcdir, and avoid running "make" (particularly "make depend", which involves "gcc") from inside configure. Build Makefile directly rather than building Makefile.conf first. * configure: Regenerate with above changes. * Makefile.in: Use $(BISON) to find bison. Roll VERSION to 3.98. Revise gdb.tar.Z procedure to produce a file called gdb-$(VERSION).tar.Z but which unpacks into a directory called "gdb". Move non-source files out of $(SFILES_SUBDIR). Pretty up alldeps.mak with comments. (depend): Don't try to do "gcc expread.y". (expread.o): Update dependencies by hand. Mon Jul 29 15:21:09 1991 Roland H. Pesch (pesch at cygint.cygnus.com) * doc/gdb.texinfo: Fixed a variety of small typos that prevented info from formatting cleanly; altered too-long heading for GPL Appendix, as discussed w/RMS; Changed date on cover to July 91. Fri Jul 26 13:20:02 1991 Roland H. Pesch (pesch at cygint.cygnus.com) * doc/gdb.texinfo: (1) Applied some fixes due to comments from Larry Breed (easier ones through chapsec 5.2) (2) Eliminated use of @footnote---had my doubts about it anyways, and it's broken in latest texinfo (3) Introduced *some* use of [] for optional arguments, where explanation is not simpler by listing cmd w arg and cmd w/out arg separately. Still not using @deffn. (4) Dropped in GPL-2. NOTE: one of GPL-2 or texinfo is broken; a couple of headings are too long. Need patches to texinfo or revision to GPL-2. * Partial update to README (which still needs work for this release!): (1) use of configure corrected for new script, (2) "make gdb.dvi" and "make gdb.info" mentioned. Wed Jul 24 06:44:02 1991 John Gilmore (gnu at cygint.cygnus.com) * symtab.c (lookup_symbol): Don't complain right off about no debug symbols; use the misc function vector first. (list_symbols): Use misc function vector to find symbols that don't have debug info, and print them. (find_pc_symtab): Temporarily avoid fatal() when psymtab PC range doesn't match symtab PC range, as it does on the MIPS because our symtab reading isn't perfect. * dbxread.c (dbx_symfile_read): Make warning about "no debug symbols" slightly nicer. * source.c (select_source_symtab): If "main" symbol exists, but decode_line_spec can't find line info, don't just return a zero; try other source symtabs or give an error. * mipsread.c (parse_partial_symbols): Sort the psymtabs by their low addresses first, then rip through fixing high addrs. * ns32k-opcode.h (sfsr): Bugfix from Rune Nerg}rd, . (NS32K_SVC_IMMED_OPERANDS): Reverse the #ifndef. Tue Jul 23 18:52:43 1991 Roland H. Pesch (pesch at cygint.cygnus.com) * Minor, mostly mechanical, cleanup of doc subdir for clean makeinfo'ing and TeXing; also ensured gdb-all.texinfo (post-m4) and gdb.info (post- texinfo2 makeinfo) generated for distribution. Sun Jul 21 03:54:52 1991 John Gilmore (gnu at cygint.cygnus.com) Mostly MIPS and general symbol-reading fixups. * doc/gdbint.texinfo: Add documentation on symbol-reading interface. * mipsread.c: Remove kludges around #include "ecoff.h". Remove redefinitions of a_magic, etc, no longer used. (parse_symbol, ): Convert "Internal:" printfs to complain()ts. Fix global overview comments to match symfile.c protocol. (mipscoff_new_init): Eliminate cur_hdr if we have one. (mipscoff_symfile_read): Eliminate unused code. Avoid sorting all the symtabs, when all we have read here is psymtabs. The symtabs are sorted as they are created anyway. Tell condense_misc_bunches whether we're mainline. (psymtab_to_symtab_1): Pass filename when recursing, to make stack trace more informative. (parse_partial_symbols): Assume cur_hdr as argument. (read_mips_symtab): Don't clobber cur_hdr, so it can be freed. Pass cur_hdr implicitly to parse_partial_symbols. Avoid checking the TYPE_NAME of char *, since that's done in symfile.c. (free_numargs, parse_symbol, add_symbol, add_block, shrink_linetable): Declare these fns void. (upgrade_type): Convert tree of if's to switch. Clean up bogus "off == 0" handling with a complaint. Avoid setting field bitpos and bitsize of array with lower and upper bounds. Check specified bitsize of elements against their actual type's bitsize, and complain if different. Complain about unknown type qualifiers. (parse_fdr): Don't assume sizeof(char *) == sizeof (struct *). (psymtab_to_symtab_1): Print names of subsidiary files that are being read in. FIXME, we read far too many files. This code is not the problem, the problem is in parse_fdr where the psymtabs are set up. (cross_ref): Result should indicate that we used one aux entry normally, or two if we encountered a "next" entry. This used to leave the caller pointing at the wrong aux entry. (add_symbol): If overflowed cur_block, reallocate it larger, chase all pointers to it, and complain(), rather than clobber memory. (shrink_block): Use xrealloc rather than xmalloc-and-copy. (new_field): Only allocate one field initially, not two. Pull ++ out of macro argument. Simplify. (_initialize_mipsread): Avoid initialization of importd global_psymbols and static_psymbols. * symfile.c (psymtab_to_symtab): Depend on XXX_psymtab_to_symtab to properly set pst->symtab; avoid searching for it. (symfile_fns): Improve comments, add a FIXME. * dbxread.c: Update comments to reflect symfile protocol. (read_ofile_symtab, end_symtab): Return the symtab. (psymtab_to_symtab_1): Set pst->symtab. * coffread.c (coff_symfile_read): tell condense_misc_bunches whether we're mainline. * symfile.h (sym_fns): Remove unused sym_discard member. * coffread.c, mipsread.c, dbxread.c: Remove XXX_symfile_discard. * mtrace.c (mtrace): Take effect if mallwatch is set, even if the environment variable is not. * infcmd.c (finish_command): Use filtered printfs. * cplus-dem.c: Add struct tags to a few unnamed structs. * valops.c (value_coerce_array): Improve comments. * valprint.c (type_print_varspec_suffix): Print array size only if greater than zero. * m88k-tdep.c: Shift some lines left by one space, that had apparently been trashed at some point. * TODO: More things to do, a few got done. Thu Jul 18 22:46:05 1991 John Gilmore (gnu at cygint.cygnus.com) * symtab.h (LOC_EXTERNAL): Eliminate in favor of LOC_STATIC. (ldsymoff, ldsymlen, globals_offset, statics_offset): Improve comments. * dbxread.c (read_dbx_symtab): LOC_EXTERNAL -> LOC_STATIC. * expread.y, findvar.c, symmisc.c: Ditto. * printcmd.c (address_info): Update printed forms of LOC_ symbols. Elim LOC_EXTERNAL. (print_frame_args): Keep track of param stack offsets before re-looking up to find the local register param is kept in. * mipsread.c: Use and rather than . Further integration of mipsread into gdb. Eliminate unused routines, duplicate declarations. Handle static symbols in psymtabs as well as external symbols. When reading symtabs, insert symbols into the correct block (global, static, or a local block). (read_mips_symtab, parse_partial_symbols): Don't pass useless "incremental" arg. (mipscoff_symfile_read): Don't call select_source_symtab. (parse_symbol): Use SYMBOL_VALUE_ADDRESS where appropriate, rather than SYMBOL_VALUE. (parse_external): Comment clobbering of top_stack. (parse_partial_symbols): Update comments. Allocate and parse static symbols as well as external symbols. FIXME, enum values are not handled in this pass, but should be. Inline new_psymbol. Use SYMBOL_VALUE_ADDRESS. (psymtab_to_symtab_1): Read symbols into global static block by default (until enter some function's local block context). (sort_blocks): Clean up STATIC_BLOCK as well as GLOBAL_BLOCK. (destroy_all_symtabs, new_psymbol): Eliminate, unused. * source.c (select_source_symtab): Select a source symtab from either the symtabs or, failing that, the psymtabs. (list_command): Update error message. (forward_search_command, reverse_search_command): Use getc, not fgetc, for speed. FIXME, add comment about buffers that die if overrun by long line. * values.c (unpack_field_as_long, modify_field): Avoid shifting by an entire word, which is not portable, if we have a 32-bit field. (Code in dbxread.c already turns such bitfields, if aligned, into ordinary ints, but fixing this will help for other symbol formats and for future changes.) * core.c (core_open): Handle ANSI const brain death. * utils.c (vprintf): Fix varargs typo. Sun Jul 14 00:42:53 1991 John Gilmore (gnu at cygint.cygnus.com) * findvar.c (find_var_value): Handle &function better. * TODO: Document work needed on &fn and &array. * printcmd.c (print_address_symbolic): New arg is the prefix to print if a name is printed. (print_address_demangle): Honor "set print address" now. Use new arg above to improve spacing of output. * valprint.c (val_print): When printing function pointers, print symbolic form too. * breakpoint.c (breakpoint_1): Use new print_address_symbolic. Mon Jul 8 19:02:46 1991 John Gilmore (gnu at cygint.cygnus.com) * core.c (memory_error): Reword error msg to mislead less. * mips-pinsn.c (print_insn_arg 'd'): Print $ with reg name. * mipsread.c (read_mips_symtab, read_the_mips_symtab, parse_partial_symbols): Use newer BFD internals (external_filehdr and external_aouthdr), byte-swap the fields that we care about before using them, and make the file header data local to read_the_mips_symtab rather than global. Sat Jul 6 01:34:15 1991 John Gilmore (gnu at cygint.cygnus.com) * ns32k-opcode.h (movmw, movmd): Fix opcodes. Bug fix from Rune Nerg}rd on 5 Jul 1991. * main.c (command_line_input): Flush stdout and stderr before every call to readline. This reportedly fixes a bug that comes up in Sys V running emacs-gdb and/or xxgdb, when stdin/out are pipes or sockets. Thu Jul 4 14:47:06 1991 John Gilmore (gnu at cygint.cygnus.com) * configure.in, Makefile.in: Avoid rebuilding "depend" as much. Avoid declaring Makefile dependencies, because GNU Make stupidly tries to update it if we do. * coffread.c: Revise for minor changes to bfd internal coff indexes. * configure: If -template= is given a relative path, make it absolute before recurring in subdirectories. * configure, configure.in, Makefile.in: Install "configure" script as replacement for config.gdb. * config.gdb, Makefile.dist, Makefile.sdir: Remove * README: Update for configure, mostly. FIXME. * Add dec3100 as equivalent to littlemips. Indicate in all host & target config files that they are for the host. When the lines get copied into the Makefile, this makes it more obvious what's up. Mon Jun 24 23:49:07 1991 John Gilmore (gnu at cygint.cygnus.com) * sparc-opcode.h (trap opcodes): Avoid leading spaces or tabs, which end up in the disassembler output inadvertently. Wed May 29 23:01:03 1991 John Gilmore (gnu at cygint.cygnus.com) Make it compile cleanly in an ANSI GCC2 environment. * blockframe.c: * cplus-dem.c: free takes a void *, ifdef __STDC__ * dbxread.c (read_huge_number): avoid gcc2 bug hoisting calc of LONG_MAX/radix. * defs.h (alloca): Avoid doing anything if alloca already def'd. * stddef.h, stdlib.h: Remove these files. * symtab.c: Avoid declaring qsort, close. * symfile.c: Avoid declaring close. * utils.c (vprintf): Declare "ap" arg as proper va_alist. * sparc-tdep.c: Avoid including lots of Sun-host-specific files. Assorted other changes. * dbxread.c: include "libaout.h", not "liba.out.h". * printcmd.c (print_frame_args): Set recurse properly for indentation of struct and array parameters. * valops.c (value_cast): Allow cast to void. * infrun.c (resume): If NO_SINGLE_STEP, call machine dependent single_step() in a target-independent fashion. * sparc-tdep.c (single_step): Don't call ptrace ourselves, just set up to be ready to continue. This makes us target independent. * infptrace.c (child_resume): Remove call to single_step; now can single step a SPARC target of any kind. Wed May 22 18:18:24 1991 Roland H. Pesch (pesch at fowanton.cygnus.com) * Makefile.dist, doc/gdb.texinfo, doc/*-m4.texinfo: split up GDB docn into separate sections---basically chapters, plus two loose pieces that can be configured to go in different places. This allows GNU m4 to preprocess the manual without coredumping. * Makefile.dist: tell TeX where to find texinfo. Mon May 20 12:15:04 1991 Roland H. Pesch (pesch at fowanton.cygnus.com) * Makefile.dist, doc/gdb.texinfo: respectively create, and use, the new target "rdl-apps.texinfo" which captures the Makefile variable that records where to find the Readline libraries. Sun May 19 05:36:59 1991 John Gilmore (gnu at cygint.cygnus.com) * tahoe-pinsn.c: #include "tahoe-opcode.h", not "opcode.h". * tm-tahoe.h (FIX_CALL_DUMMY): Ignore more parameters. * defs.h (const, volatile): Only define if not already defined. * Makefile.dist (gdb.tar.Z): Create doc subdir w/out CVS/RCS crud. * README: Update for release 3.95. * config.gdb: Don't create readline dir in subdir builds. * main.c: Include with "..." form for non-system include files, so "gcc -MM" for "make depend" works. Include readline files with "...h" rather than . * mipsread.c: Include "ecoff.h" rather than "intel-coff.h". * coffread.c: Undo minor damage done by Rich Pixley. Use different internal and external representations of COFF data structures. Use new BFD routines for swapping them in and out. * symfile.c (free_named_symtabs): Avoid freeing file names that are null or empty. Old i960 tools seem to produce files that claim to have empty names, causing each successive file read to blow away the previous one. * sparc-xdep.c (deferred_stores): Repair minor damage by Rich. Move deferred_stores to top of file, but don't separate its #define's from its variable. Add commentary. * Makefile.dist: Fix Rich damage; undo "configure" changes in favor of keeping the (working) config.gdb. Move readline library up a notch. Fri May 17 12:49:56 1991 Per Bothner (via gnu at cygint.cygnus.com) * dbxread.c (read_struct_type): Try to handle g++ version 1 MI debug info. * infptrace.c (fetch_registers): no result, since now void. * tconfig/news: target depends on m68k-tdep too. Fri May 17 14:40:14 1991 Roland H. Pesch (pesch at fowanton.cygnus.com) * Makefile.dist: added readline/inc-*.texinfo to dependencies for gdb.dvi target * readline/inc-history.texinfo, readline/inc-readline.texinfo: applied various small fixes due to or inspired by RMS comments * doc/gdb.texinfo: finished using all RMS comments, save those for appendices on readline and cmd history (which are in other source files) Thu May 16 18:06:05 1991 Roland H. Pesch (pesch at fowanton.cygnus.com) * doc/gdb.texinfo: (1) Updated w/ref to RMS comments through chapter 9; (2) documented 'break' command's menu mode for overloaded names, in response to hgs problem report C++ p-31 Wed May 15 11:02:48 1991 Roland H. Pesch (pesch at fowanton.cygnus.com) * doc/gdb.texinfo: (1) better introductory example; (2) more consistent use of @code, @samp, @file, @kbd throughout; small cleanups to first three nodes; (3) new "Contributors" node; (4) Appendix, Renamed Commands; (5) divert specialized startup instructions to "Targets" chapter for generic manuals, while leaving them up front for manuals specific to specialized environments; (6) apply fixes from RMS comments through chapter 4. * pretex.m4: modify explanatory text slightly (and redefine "regexp") to keep GNU m4 from complaining. (It still crashes later, but one step at a time...) Wed May 15 10:32:12 1991 John Gilmore (gnu at cygint.cygnus.com) * readline/readline.c (update_line): Avoid dereferencing a pointer before comparing it to its bounds. Saber caught this. (init_terminal_io): Don't set BC from the "pc=" termcap variable, and only set PC if tgetstr returned non-null. Saber caught this. Tue May 14 16:29:53 PDT 1991 Roland Pesch (pesch at cygint.cygnus.com) * Makefile.dist: put gdb.dvi stuff (updated to use M4 preprocessor stuff for config manual) here where it counts; updated to use new subdir structure (gdb/doc/). * Makefile: generated from above via config.gdb none before checkin * gdbint.texinfo: added instructions on generating gdb.info* files locally for release. These are ordinary info files, formatted from gdb.texinfo (via gdb-all.texinfo, see Makefile)---but due to use of texinfo 2, can't count on makeinfo to generate these, so we distribute them already formatted. * gdb.texinfo: included full Info node and menu crud (as generated by C-u M-x texinfo-master-menu using the texinfo-2 elisp code). * Makefile: updated "gdb.dvi" target to use M4 preprocessor; put in comments-for-future gdb.info target (one day makeinfo will work again). Tue May 14 13:51:36 PDT 1991 Roland Pesch (pesch at cygint.cygnus.com) * gdb.texinfo: Updated to include new or old undocumented commands, at least the following (perhaps some others I forgot to record): info f, info float, info path, info program, info s, info set, info source, info terminal, info types, info user, set/show print object. Also covered all recent GDB command renames for v4. Mon May 13 14:57:46 1991 John Gilmore (gnu at cygint.cygnus.com) * mipsread.c: Rather than keeping count of how many symtabs and psymtabs we have, for sorting purposes, count them when we need to sort. This fixes bug in rereading of symbol tables. Fri May 10 15:43:33 PDT 1991 Roland Pesch (pesch at cygint.cygnus.com) * infcmd.c: renamed "info path" to "show paths" * gdbrc.tex: documented above. Wed May 8 04:51:11 1991 John Gilmore (gnu at cygint.cygnus.com) * remote.c: Fix comments. * utils.c (error): Force out any pending wrap output. Sat May 4 11:11:07 1991 John Gilmore (gnu at cygint.cygnus.com) * Makefile.dist: Roll VERSION to 3.95. Fix up "saber_gdb" to work again. * saber.suppress: Update. * coffread.c, exec.c, infptrace.c, inftarg.c, remote.c, solib.c, symtab.h, target.c, target.h: Lint. * core.c: setup and select frame after reading shared libs, else reading shared libs will clobber them. Lint. * utils.c (error): Force out any buffered wrap text. Fri May 3 22:01:56 1991 John Gilmore (gnu at cygint.cygnus.com) * remote.c: Remove decls of memory_insert_breakpoint and memory_remove_breakpoint, no longer used. (Suggestion of Jan Norden). * Makefile.dist: use ${subdir} in paths of BFD and LIBIBERTY, to make it easier to interface to "configure"'d libraries. Fri May 3 13:10:01 PDT 1991 Roland Pesch (pesch at fowanton.cygnus.com) * valprint.c: introduce "set p", "set pr", "show p" and "show pr" as aliases for set/show print. Thu May 2 11:22:02 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * coffread.c (coff_sym_fns) [TDESC]: Make the type be m88kbcs. * m88k-tdep.c (IEEE_isNAN): New function. * infrun.c, m88k-tdep.c, m88k-xdep.c: Change initialize_{tdesc,dcontext} to init_{tdesc,dcontext}. * infrun.c [TDESC]: Add a bunch of crud. * xm-88k.h [__GNUC__]: Don't define memset. * m88k-xdep.c: #if 0 out push_breakpoint. * tm-88k.h: Define GET_SAVED_REGISTER. * tm-88k.h: Define DGUX. * m88k-opcode.h (UEXT, SEXT, MAKE): Put parentheses around arguments. * m88k-pinsn.c (sprint_address): Declare at top of file. * m88k-xdep.c: #if 0 out core_file_command. * values.c ({unpack_,value_as_}pointer): Just call {unpack_,value_as_}long (for now anyway). * m88k-tdep.c (get_saved_register): Make get_reg a dc_word_t (*)(). (psr_register): Change return type to dc_word_t. * m88k-tdep.c (tdesc_read_function): Comment out call to ptrace. * m88k-tdep.c (get_saved_register): Add lvalp parameter. * gdbcore.h (write_memory): Don't prototype it. * tm-88k.h, m88k-tdep.c: Make stack_error, stack_jmp global. m88k-xdep.c: Don't mention stack_error. * {x,t}config/m88k ({X,T}DEPFILES): Add missing files. * mtrace.c: Don't typedef things like size_t, just #define them. * coffread.c [TDESC]: #if 0 out references to coffsyn. * symtab.h (struct symtab): Include EXTRA_SYMTAB_INFO. tm-88k.h: Define EXTRA_SYMTAB_INFO. * coffread.c [TDESC]: Include "tdesc.h" and make tdesc_handle dc_dcontext_t not int. * coffread.c [TDESC]: Use system include files not . * coffread.c [TDESC]: Move setting of debug_info from coff_symfile_read to find_linenos and make it work with BFD. * cplus-dem.c [__STDC__]: Make x{m,re}alloc return void*. * signame.c: Cast const char* to char* when assigning to sys_siglist. * utils.c (strsave): Make arg const char* not char*. * infrun.c (wait_for_inferior) [SHIFT_INSN_REGS]: Use bpstat_explains_signal (stop_bpstat) not stop_breakpoint. * tm-88k.h (START_INFERIOR_HOOK): Make tdesc_handle a dc_handle_t. * tm-88k.h (EXTRACT_RETURN_VALUE): Use char * not void *. * findvar.c (read_var_value, case LOC_CONST_BYTES): Put the address in a char *, not a CORE_ADDR. Use SYMBOL_VALUE_BYTES. * tm-88k.h (INIT_EXTRA_FRAME_INFO): Use fci not prev (fci is prev except from create_new_frame). Make next_frame a local variable. Declare get_prev_context. {x,t}m-88k.h: Enclose USG and BCS defines in #if !defined. m88k-{opcode.h,pinsn.c,xdep.c,tdep.c}: New files (same contents as before; they had just been left out of the distribution for a long time). Thu May 2 17:53:56 1991 John Gilmore (gnu at cygint.cygnus.com) Mips bringup and general cleanup * cplus-dem.c: Move CPLUS_MARKER define to after defs.h. * infptrace.c (PT_WRITE_D, PT_READ_D): Use correct values. (This still doesn't seem to make MIPS bkpts work.) * mipsread.c: Remove dup "Reading symbol data..." msg. (symbol_file_command, add_file_command): Remove, obsol. * printcmd.c (ptype_command): Say "an enum" rather than "a enum". Wrap output appropriately. * stack.c (locals_info, catch_info, args_info): Check selected_frame rather than target_has_stack or coredumping. * valprint.c (type_print_varspec_suffix): Wrap "ptype" output of enums appropriately. Wed May 1 14:10:22 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * signame.c: Include defs.h and param.h. * cplus-dem.c: Include defs.h and param.h. Makefile.dist: Don't hack in the "param.h". param.h: Don't include defs.h. * expread.y: Use a union to deal with the fact that type_stack can have both ints and enum type_pieces in it. ({push,pop}_type_int): New functions. Tue Apr 30 13:18:58 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * cplus-dem.c (cplus_mangle_opname): Don't call error. values.c (check_stub_method): Call error if NULL return from cplus_mangle_opname. * blockframe.c, breakpoint.c, core.c, command.c, findvar.c, eval.c, expprint.c, infcmd.c, infrun.c, main.c, printcmd.c, remote.c, source.c, stack.c, dbxread.c, coffread.c, symfile.h, symfile.c, utils.c, valarith.c, values.c, valops.c, tm-68k.h, target.c, inftarg.c, ieee-float.c, environ.c, defs.h, command.h, inferior.h, gdbcore.h, symtab.h, expression.h, symtab.c, cplus-dem.c, value.h, expread.y, valprint.c, copying.awk, solib.c, inflow.c, symmisc.c : Lint. Use read_memory not read_memory_integer on CORE_ADDR's. Use {value_as,unpack}_pointer (added to values.c) not {value_as,unpack}_long on CORE_ADDR's. Use longest_to_int (added to defs.h) instead of cast to int. Remove from_tty arg to mod_path. Put symfile_bfd in {coff,dbx}read.c not symfile.h. Use OP_NULL instead of 0 where dummy enum exp_opcode needed. * tm-sparc.h: Remove GET_RWINDOW_REG. (FRAME_CHAIN): Call sparc_frame_chain. sparc-tdep.c (sparc_frame_chain): New function. tm-sparc.h (EXTRACT_STRUCT_VALUE_ADDRESS): call sparc_extract_struct_value_address (added to sparc-tdep.c). * xm-sun386.h: Don't define SET_STACK_LIMIT_HUGE. Tue Apr 30 13:13:33 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * valprint.c (type_print_base): If the type being printed is a struct containing undefined types, print "" as the type instead of crashing. * values.c (value_headof): Get the vtable pointer taking TYPE_VPTR_BASETYPE into account. * symtab.c, symtab.h, dbxread.c: Fix various whitespace splotches. Mon Apr 29 13:22:51 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * Move BROKEN_LARGE_ALLOCA from tm-sun386.h to xm-sun386.h. * sun386-xdep.c [!GDB_TARGET_IS_SUN386]: Just provide empty functions which don't do anything. tm-sun386.h: Define GDB_TARGET_IS_SUN386. * Makefile.dist: Add comment about tm-sun3os4.h: tm-sun3.h, etc. * sun3-xdep.c, tm-sun3.h, tm-68k.h: Change TARGET_SUN3 to GDB_TARGET_IS_SUN3. * infrun.c: Don't include sys/user.h and friends (wrong for cross-debugging and not necessary anymore (see IN_SIGTRAMP in xm-vax.h)). [SET_STACK_LIMIT_HUGE]: Include . xm-tahoe.h: Don't define _DIRENT_. * xm-tahoe.h: Remove USE_OLD_TTY (not needed now that terminal.h includes sgtty.h before sys/ioctl.h). Sun Apr 28 22:04:47 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * param-no-tm.h: Make BITS_BIG_ENDIAN defined to 0/1, not defined or not defined. Don't define it based on TARGET_BYTE_ORDER if it's already defined (in the tm.h file). mips-opcode.h (BIT_FIELDS_*), values.c (modify_field, unpack_field_as_long): Use #if BITS_BIG_ENDIAN not #ifdef BITS_BIG_ENDIAN. {x,t}m-tahoe.h, tahoe-pinsn.c, tahoe-opcode.h: New files. Fri Apr 26 12:02:06 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * tm-sparc.h: Add comments about gcc version 2 and structure passing. * xconfig/i386v{,32}{,-g}: Add XM_CFLAGS=-Dgetpagesize()=4096. gmalloc.c: #if 0 out !HAVE_GETPAGESIZE code. * expread.y (abs_decl): Accept '&' and '&' abs_decl. * symtab.c, symtab.h: Have a builtin_type_{,unsigned_}long_long regardless of LONG_LONG. defs.h (TARGET_LONG_LONG_BIT): New macro. expread.y (typebase): Add {unsigned,} long long {,int}. Thu Apr 25 12:31:22 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * valops.c (typecmp): If t2 == 0, return 1. Wed Apr 24 09:45:17 1991 Jim Kingdon (kingdon at cygint.cygnus.com) Changes from Tiemann: * cplus-dem.c (optable): Add "nw", "dl", "compound". (cplus_mangle_opname): New function. (do_type): Add case 'Q'. * values.c (check_stub_method): Do lookup_method_type and stuff rather than smash_to_method_type. symtab.c, symtab.h (allocate_stub_method): New function. dbxread.c (read_type): If we get "##", don't lookup_function_type and start clobbering it; allocate_stub_method instead. * printcmd.c (x_command): Dereference references. * valprint.c (type_print_varspec_prefix, case TYPE_CODE_METHOD): Don't print " " type_print_base (...) "::" if !passed_a_ptr. * dbxread.c (read_struct_type): Put "op$" instead of "operator" in the symbol table. * values.c (check_stub_method): Deal with operator names. * valprint.c (cplus_val_print): Check for error in baseclass_addr. * values.c: Move declaration of cplus_demangle to top of file. * values.c (baseclass_addr): If can't read memory, set *ERRP rather than calling error(). * value.h: Remove redundant declaration of value_static_field. * values.c (value_static_field): Recursively check all baseclasses. Return NULL if not found. * values.c, value.h: New functions value_{headof,from_vtable_info}. * valprint.c (val_print): Print out first element of vtbl specially. * valprint.c: Move print controls to top and add objectprint. Add command "set print object on/off". * valprint.c (value_print, is_vtbl_member): Put things in local variables rather than continually doing VALUE_TYPE (val), etc. * valops.c (value_struct_elt_for_address): Call check_stub_method. * valops.c (value_struct_elt): Remove found, arg1_as_ptr. * valops.c (search_struct_method): Give error if j > 0 && args == 0. * valops.c (search_struct_field): New argument looking_for_baseclass. Give error if value_static_field or value_primitive_field return NULL. valops.c (various): Call search_struct_field with extra parameter. * symtab.c (decode_line_1): Deal with operators specified as "operator" . (operator_chars): Help do it. * symtab.c (lookup_struct_elt_type): Call check_stub_type. Take additional argument noerr. Don't dump core if TYPE_FIELD_NAME is NULL. Check the baseclasses recursively. * symfile.c (fill_in_vptr_fieldno): Don't call check_stub_type. Return void not int. (also declarations in symfile.h and value.h). Deal with multiple inheritance. * printcmd.c (print_command_1): Add if (objectprint) code. * expread.y (variable): Allow for destructor with foo::~name. * eval.c (evaluate_subexp, case UNOP_LOGNOT): If following opcode is OP_SCOPE, give an error. * eval.c (evaluate_subexp): Pass third arg to lookup_struct_elt_type. * eval.c (evaluate_subexp), values.c (value_virtual_fn_field): Don't bother to do anything with return value from fill_in_vptr_fieldno. * eval.c (evaluate_subexp): If value_static_field returns NULL, give an error. * dbxread.c (read_struct_type): Set fcontext to 0 for normal member function. * dbxread.c (read_struct_type): Initialize name to 0. * dbxread.c (read_ofile_symtab, N_CATCH): Add offset to bufp->n_value. * dbxread.c (dbx_create_type): Zero TYPE_VPTR_BASETYPE. (read_struct_type): Don't bother to set TYPE_VTPR_{BASETYPE,FIELDNO} if it's just going to be {0,1}. * dbxread.c (virtual_context): Use TYPE_BASECLASS starting at 0 (yes, it's #if 0, but just in case...). * vax-opcode.h, expread.y, expprint.c, cplus-dem.c: Declare some things "const". * i386-stub.c: New file. * WHATS.NEW: Remove mention of readline and more paging (in 3.5). Try to keep command names up to date with renaming. * gmalloc.c [!HAVE_GETPAGESIZE]: Try to figure out the pagesize. * infun.c (resume, resume_cleanups): New functions. (wait_for_inferior, proceed, child_create_inferior): Use resume not target_resume. * remote.c (getpkt): Don't set immediate_quit. * blockframe.c, frame.h (reinit_frame_cache): New function. solib.c (solib_add), symfile.c ({,add_}symbol_file_command): Use it. Tue Apr 23 10:38:41 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * symtab.c (lookup_symbol): Add 3 more of those loops through the symtabs which we all know and love: (1) Look in the STATIC_BLOCK for mangled symbols right after we check the blocks, (2, 3) Look in the STATIC_BLOCK for all the symtabs and psymtabs at the end. * main.c (cd_command): Call dont_repeat. * dbxread.c (read_struct_type): If const/volatile character is missing, don't complain, just continue. * dbxread.c (read_struct_type): Only try to read the fcontext if it is there. Also change "error_type " to "return error_type ". values.c (value_virtual_fn_field): If there is no fcontext, then do things the way GDB 3.x did. valops.c (search_struct_method): Add type to value_virtual_fn_field arguments. * dbxread.c (read_struct_type): Fix typo: *pp != '\0' -> **pp != '\0'. Mon Apr 22 00:02:43 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * printcmd.c (print_scalar_formatted): Add 't' for binary. * dbxread.c (end_psymtab): Initialize pst->symtab. * core.c (core_open): Call ADD_SOLIB. * tm-sparc.h: Include not . sparc-tdep.c: Don't include . * sun3-xdep.c [!TARGET_SUN3]: Just provide empty functions which don't do anything. * core.c (core_open): Add make_cleanup (unpush_target, &core_ops). * Shared library/corefile changes from Peter Schauer: core.c (core_close): Call CLEAR_SOLIB. (core_open): Remove comment about "should deal with shared lib". (core_xfer_memory): If we can't xfer the usual way, try the shared libraries. solib.c (so_list): New fields so_bfd and so_sections{,_end}. (find_solib): Use solib_map_sections to get ld_text. (solib_map_sections, solib_xfer_memory): New functions. (clear_solib): Free so_sections and close so_bfd. tm-sunos.h: Add solib_xfer_memory, solib_add. * sparc-tdep.c (skip_prologue): Don't skip anything unless there is a "save" instruction in there somewhere. * symfile.c (symbol_file_add): Add comment. solib.c (solib_add): Don't malloc name passed to symbol_file_add. * exec.c (build_section_table): If *start isn't NULL, free it. * stack.c (parse_frame_specification): Error if NULL selected_frame. infcmd.c (finish_command): Error if NULL selected_frame. inflow.c (kill_command): Deal with NULL selected_frame. stack.c (record_selected_frame): Set *FRAMEP to NULL if there is no selected frame. infrun.c (restore_inferior_status): Add comment. findvar.c (read_var_value): Check for NULL frame where we need a frame. breakpoint.c (get_catch_sals): Check for NULL selected_frame. * breakpoint.c (bpstat_print): Try all elements on the bpstat chain before giving up with an internal error. Sun Apr 21 21:43:10 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * value.h, values.c (value_{,free_to_}mark): New functions. breakpoint.c (bpstat_stop_status): Use them. * tm-i386v{,-g}.h: Remove N_SET_MAGIC define. Sat Apr 20 21:42:47 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * i386-tdep.c: Remove unnecessary #includes. * symtab.c (various): Change error return of find_line_common to -1. * coffread.c (find_linenos): Use LINESZ not sizeof (struct lineno). * coffread.c (end_symtab): Initialize language, dirname, and fullname fields. Fri Apr 19 18:18:31 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * mips-tdep.c (mips_frame_chain): Don't chain if saved_pc == 0. * stddef.h (size_t): Let either _SIZE_T or _SIZE_T_ guard it. * mipsread.c (parse_symbol): Set startup_file_{start,end} if entry_point is in current file. * findvar.c (read_register_gen): Add "target byte-order" comment. Wed Apr 17 17:09:48 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * i386-tdep.c (i386_get_frame_setup): Use SWAP_TARGET_AND_HOST before returning locals or slocals. * i386-tdep.c (i386_follow_jump): Do not add data16 to pos in call to codestream_seek; add one to pos if (and only if) we are dealing with a jump with data16 == 1 (i.e. 0x66, 0xe9). Mon Apr 15 12:04:32 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * valops.c (call_function_by_hand): Put dummy1 in target order before FIX_CALL_DUMMY. * tm-i386v.h (FIX_CALL_DUMMY): Don't depend on host byte order. Sun Apr 14 11:55:19 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * valops.c (push_word): Add SWAP_TARGET_AND_HOST. * remote.c (remote_open): Send '+' before calling putpkt(). * tm-i386v.h (REGISTER_VIRTUAL_TYPE): Return pointer to void, not int, for pc, fp, and sp. * remote.c (remote_open): Call start_remote after putpkt("?"); infrun.c (start_remote): Also call wait_for_inferior & normal_stop. Sat Apr 13 22:11:42 1991 Jim Kingdon (kingdon at spiff.cygnus.com) * exec.c: Include . * sun3-xdep.c (fetch_core_registers): Add #ifdef FP0_REGNUM. Fri Apr 19 09:36:50 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * tm-68k.h (NUM_REGS): Conditionalize on TARGET_SUN3 not sun. tm-sun3.h: Define TARGET_SUN3. * utils.c: Use CPLUS_MARKER not '$'. * cplus-dem.c: Use CPLUS_MARKER not '$'. If CPLUS_MARKER isn't defined, define it to '$'. * arm-opcode.h: New file (same contents as before; it had just been left out of the distribution for a long time). * tm-68k.h: Put declaration of ext_format_68881 outside the macros. * main.c: New HAVE_SIGSETMASK #ifdefs. * coffread.c (read_coff_symtab): Check for "LF%" with all the other L*% things. * coffread.c (SDB_TYPE): New macro. various: Use it instead of checking against T_NULL. * Makefile.dist (cplus-dem.o): Hack in an #include "param.h" before we compile it. defs.h: Protect against multiple inclusion. param.h: Include defs.h. signame.c: Change #ifdef SYS_SIGLIST_MISSING to #if. param-no-tm.h: Define SYS_SIGLIST_MISSING from USG. Thu Apr 18 19:49:10 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * i386-pinsn.c (OP_E): Change %d to 0x%x for consistency. * putenv.c: New file Makefile.dist: Add it to $(OBS). * mipsread.c [!CMUCS]: #include . * mips-xdep.c (fetch_core_registers): #if 0 out the whole function. * Move read_memory_nobpt from mem-break.c to breakpoint.c. Mon Apr 15 21:45:35 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * utils.c (_initialize_utils): Rename "set demangle" to "set print demangle", "set asm-demangle" to "set print asm-demangle" and "set sevenbit-strings" to "set print sevenbit-strings". * main.c (initialize_main): Rename "set history write" to "set history save". * main.c (initialize_main): Rename "set caution" to "set confirm". * values.c (_initialize_values): Remove "info history" alias for (what is now) "show values". * infcmd.c, gdbcmd.h: Add unsetlist. infcmd.c: Add unset_command. (_initialize_infcmd): Add "unset" and use it for "unset env". * breakpoint.c (_initialize_breakpoint): Remove "unset". * valprint.c: Add "set/show print", {set,show}_print. Rename "set addressprint" to "set print address". Rename "set arrayprint" to "set print array". Rename "set array-max" to "set print elements". Rename "set prettyprint" to "set print pretty". Rename "set unionprint" to "set print union". Rename "set vtblprint" to "set print vtbl". * main.c: Rename version_info to show_version. (_initialize_main): Rename "info version" to "show version". * values.c: Rename value_history_info to show_values. (_initialize_values): Rename "info values" to "show values". Sun Apr 14 23:08:34 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * inftarg.c (child_open), remote-vx{,.68}.c (vx_proc_open): New function to give correct error message. Thu Apr 11 17:19:41 1991 Jim Kingdon (kingdon at cygint.cygnus.com) * target.h: Add to_doc and target_preopen. target.c: Add target_preopen and target_command. Remove target_info. (add_target): Call add_cmd and mess with targetlist->doc. core.c, exec.c, remote-eb.c, remote-nindy.c, remote-vx.c, remote-vx.68.c, inftarg.c, remote.c: Add doc field to target struct. Call target_preopen from open routine. * main.c: Rename editing_info to show_commands. (_initialize_main): Rename "info editing" to "show commands". * source.c: Rename directories_info to show_directories. (_initialize_values): Rename "info directories" to "show directories". * values.c: Rename convenience_info to show_convenience. (_initialize_values): Rename "info convenience" to "show convenience". * copying.awk (_initialize_copying): Rename "info copying" to "show copying" and "info warranty" to "show warranty". Rename {copying,warranty}_info to show_{copying,warranty}. * symfile.c: Rename add_syms_command to add_symbol_file_command. (_initialize_symfile, add_syms_addr_command): Rename add-syms to add-symbol-file. Thu Apr 18 18:08:30 1991 John Gilmore (gnu at cygint.cygnus.com) * symfile.h (free_named_symtabs): Rename from free_named_symtab. * symfile.c (clear_symtab_users_once, cashier_psymtab, free_named_symtabs): Move these routines from symmisc.c. * symmisc.c (same): same. (free_symtab): Make non-static. * symtab.h (free_symtab): Declare as exported void fn now. * dbxread.c (end_symtab, end_psymtab): Change comments. (initialize_dbxread): Call dbx_new_init() in case the first command is add-symbols. * target.c (dummy_target): Permit add_syms_addr_command. Sat Apr 13 14:46:07 1991 John Gilmore (gnu at cygint.cygnus.com) Permit symbols to be superseded when new symbol files have been read in, particularly for VxWorks. * dbxread.c (read_dbx_symtab): Allow N_SOL to cleanly take us back to the main file, as well as to include files. Also, put global functions into the global psymtab, to make "i fun" work. (end_psymtab): Free named symtabs and psymtabs for a file, once a new psymtab for it has been read. * coffread.c (end_psymtab): Free named symtabs and psymtabs for a file, once a new symtab has been read for it. * mipsread.c: FIXME. We need to do the same for MIPS, but it looks harder to determine the top-level block before it's been queued to the psymtab list. * symfile.c (symbol_file_add): Use filtered printing and wrap it. If we have wiped out any old symbol tables, clean up at end of symbol reading. (symbol_file_command): Don't reference symfile_fns if it's zero. * symtab.h (GLOBAL_BLOCK, STATIC_BLOCK, FIRST_LOCAL_BLOCK): New defines for the blocks of a blockvector that contain global and file-static symbols and the first of the smaller scope contours. * symtab.c (lookup_symbol, find_pc_symtab, find_pc_line, decode_line_1, make_symbol_completion_list): Use the above. * coffread.c (end_symtab, patch_opaque_types): Ditto. * dbxread.c (end_symtab): Ditto. * expread.y (block): Ditto. * mipsread.c (throughout): Ditto. * symmisc.c (free_named_symtabs): Ditto. * symtab.c (list_symbols): Process the first symbol of the static psymbols list. (types_info): Restore this function from its untimely #if 0. It's not perfect, but it is better than nothing. (_initialize_symtab): Restore "info types". Thu Apr 11 05:23:19 1991 John Gilmore (gnu at cygint.cygnus.com) * m68k-stub.c: Remote stub for 680x0's, created from rem-m68k.shar (which is removed). * nindy-share/{Makefile,Onindy.c,blout.h,env.h,nindy.c,ttyflush.c}: Remove RCS log stuff now that we use CVS and it blows our diffs. Wed Apr 10 14:18:06 1991 John Gilmore (gnu at cygint.cygnus.com) * symmisc.c (free_named_symtab): Make it work, in its current kludgy fashion. Change result to indicate if we blew away bkpts. * dbxread.c (end_symtab): Accumulate result from free_named_symtab and print warning if we blew user's state. * symfile.h: free_named_symtab now returns an int. Mon Apr 8 23:57:43 1991 John Gilmore (gnu at cygint.cygnus.com) * dbxread.c (dbx_symfile_read): Initialize psymbol list if this is the first symbol read, even if not mainline. (dbx_psymtab_to_symtab): symfile might be zero, cope. * exec.c (exec_ops): Add_syms_addr is valid in our tvec. (set_section_command): New command ("section xxx yyy" -- should be renamed to "set section xxx yyy" FIXME) which sets the base address of a section of the exec file, overriding the virtual address that BFD reports. Fri Apr 5 17:14:39 1991 John Gilmore (gnu at cygint.cygnus.com) * exec.c: Add add_syms_addr_command to exec_ops, so you can load symbols at any address while examining an exec file. Thu Apr 4 10:09:35 1991 John Gilmore (gnu at cygint.cygnus.com) * tm-i386v.h (FLOAT_INFO): Don't define it, since the code for printing the float info is host-dependent, not target-dependent. FIXME. * i386-pinsn.c: Move #includes to top, remove useless ones. * i386-tdep.c: Don't bother including <.../reg.h> since we don't use it (and it doesn't exist on host systems). * ieee-float.c (ieee_extended_to_double): Convert NaN to Inf. Convert negative numbers properly. (ieee_test): Make numbers really random; fix format arg. * infcmd.c (attach_command, detach_command): Don't repeat on CR. * core.c (core_detach): Unpush core_ops, which might not be on top. We used to just pop the top, which broke things. Don't need dont_repeat() any more. (core_file_command): Psst! Don't repeat it. * remote-nindy.c (nindy_detach): Don't need dont_repeat() now. * expprint.c (print_subexp): Avoid switch fallthru on BINOP_ASSIGN_MODIFY, so we can print += and such. * frame.h: Fix typo. * inflow.c (kill_command): After killing inferior, print our current frame in the core file, if we have one. (generic_mourn_inferior): When inferior dies, either select the current frame (in the new target, e.g. core file), or set both the current and selected frames to NULL. Changes from Peter Schauer. * infptrace.c: Avoid on USG. * Make all file names fit in 14 characters (sigh and damn!): mv hp300hpux-xdep.c hp300ux-xdep.c mv symmetry-xdep.c symm-xdep.c mv symmetry-tdep.c symm-tdep.c mv convex-opcode.h convx-opcode.h mv tm-vxworks960.h tm-vx960.h mv tm-vxworks68.h tm-vx68.h mv Makefile.srcdir Makefile.sdir mv gdb-int.texinfo gdbint.texinfo mv remote-sa.m68k.shar rem-m68k.shar mv remote-multi.shar rem-multi.shar * Makefile.dist, README, config.gdb, convex-pinsn.c, tconfig/symmetry, tconfig/vxworks960, tconfig/vxworks68, xconfig/hp300hpux, xconfig/symmetry: Change names to shorter names. * command.c (user_info_1, user_info): New command for listing the user-defined commands. Wed Apr 3 15:00:26 1991 John Gilmore (gnu at cygint.cygnus.com) * dbxread.c (really_free_pendings): Clear file_symbols and global_symbols after freeing them; otherwise, running this function twice (if it appears twice on the cleanup chain), we try to free things twice. * dbxread.c (read_dbx_symtab): Calculate end_of_text_addr based on text_addr (the address of text in core), not on addr (the offset between text in the .o file and in core). This change is from Peter Schauer. * main.c: Define ALL_CLEANUPS as a cast of zero. (return_to_top_level): Use it. (main): Do all cleanups after each command run as part of the gdb startup sequence. Also do all cleanups before entering the command loop, and every time we exit the command loop and reenter. Before, the cleanups from the startup sequence were being left undone until the first error! (command_loop): Rename do_nothing cleanup to command_loop_marker so we can see it easily when examining the cleanup chain. (init_signals): Add another do_nothing for signal handling. (quit_command): Only try to kill target if it has execution. Problems in the target stack got us into a state where inferior_pid was nonzero but none of the targets had execution. In this state you couldn't exit gdb. * dbxread.c: Two changes from Peter Schauer. (echo_command): Fflush output after an echo command. (show_history): Pass all args to cmd_show_list. * utils.c (init_malloc): Call mtrace to turn on tracing if the environment variable MALLOC_TRACE is set to a file name. * mtrace.c: Add source file which provides a log of every malloc, free, and realloc to a trace file. * mtrace.awk: Add source file which analyzes the trace file. * Makefile.dist (GNU_MALLOC, MALLOCSRC): Add mtrace.{c,o,awk}. (VERSION): Roll to 3.94.3. * breakpoint.c (breakpoint_1): Add a space to "i watch" output. (check_duplicates): Don't bother with watchpoints. (set_raw_breakpoint): Comment about danger of this routine. (watch_command): Parse and eval all args before calling set_raw_breakpoint. * solib.c (find_solib): Avoid error in referencing memory to see if any more shared libraries have been added. This is particularly useful if the target has terminated. Bug reported by Peter Schauer. Changes from Peter Schauer in bringing up 3.94.2 on the Sun-3. * Makefile.dist: Include CFLAGS in rule for cplus-dem.o. * breakpoint.c (enable_breakpoint): Check for valid watchpoint expression (in scope) before reenabling watchpoint. * signame.c (init_sigs): Add missing declaration of i, fix sys_siglist declaration. * source.c (list_command): Fixed range computation to use lines_to_list (). * stack.c (backtrace_command): Do not allow command if target has no stack, print informative error message. * target.c (target_command): Do not write into command line because this fails if the target command is used in a user defined command. [This change was enhanced by gnu to support any- unique-prefix matching on target names.] * valops.c (value_struct_elt): Avoid infinite loop on an erroneous attempt to print the member of function (try p main.p). Mon Apr 1 17:05:45 1991 John Gilmore (gnu at cygint.cygnus.com) * expread.y (name_no_typename): Avoid reduce/reduce errors caused by ambiguity in handling NAME_OR_INT and NAME_OR_UINT. Since the GDB parser really doesn't use name_no_typename in a name-only context, the parser can't tell the diff between names and numbers here. Avoid allowing a name_no_typename to be a NAME_OR_*INT to resolve the conflict. Sun Mar 31 20:12:07 1991 John Gilmore (gnu at cygint.cygnus.com) Bugfixes from Mark Fox (markf@wrs.com) (test=testField.c): * valprint.c (val_print_fields): bitfield printing didn't handle byte order. Indirect through a few more fns to cope. * values.c (modify_field): also cope with byte order. Sat Mar 23 10:02:21 1991 John Gilmore (gnu at cygint.cygnus.com) Cleanup for release 3.94.2: * Makefile.dist: Pull REMOTE_OBS. Fix saber includes for BFD include files. Roll version to 3.94.2. * coffread.c (init_stringtab): Read length into unsigned char array before swapping; don't assume 32-bit longs. * target.c (target_info): Don't bother with get_sym_file, just use the symfile global variable. * symtab.h, symfile.c (get_sym_file): Delete it. * dbxread.c (dbx_symfile_init): Don't depend on long == 4 bytes. (define_symbol): Set symbol line number to 0 if not gcc-compiled. (read_type): Replace one more error() with complain(). * mipsread.c (parse_partial_symbols): Replace printf with complain. * i960-tdep.c: Fix copyright attribution. * config.gdb: Quote all backquotes in doublequotes. You can quote me on that. BSD 4.4 shell found this one. * infptrace.c (throughout): The third argument to ptrace is an int *, not an int. * infrun.c (wait_for_inferior): When program has terminated, we have to call target_terminal_ours before we pop that target off the stack (e.g. before a call to target_kill or target_mourn_inferior). This fixes problem where a program terminates, then GDB stops for (tty output) and you have to type "fg" to the shell to resume it. FIXME: This code for what to do after termination really should be in normal_stop instead. * gdbcore.h (read_memory_check): Change declaration; it changed names months ago. * terminal.h: Include before , since in BSD 4.4 prereleases, this avoids a bug in their sgtty compatability support. * remote.c: Use terminal.h rather than hand-rolling the same. * signame.c, signame.h (psignal): Arg is unsigned, not int. * utils.c (strsave, strstr): Fix arg types. * valprint.c (val_print): lint MIPS symbol table support from Per Bothner: * symfile.c (symtab_fns): Remove initializer table that needs to be hacked for each new symbol file format supported. (add_symtab_fns): New function, chains symbol table handlers into the global list. (symfile_init): Search this list. * symfile.h: Add next pointer, declare add_symtab_fns. * coffread.c (_initialize_coffread): Call add_symtab_fns. * dbxread.c (_initialize_dbxread): Call add_symtab_fns. * mipsread.c (psymtab_to_symtab_1): return void instead of (struct symbol *). Thus, we no longer need the hack to trash pst->filename. Good, since that hack confused code in symfile.c! (reorder_symtabs, destroy_all_symtabs): Removed static all_symtabs, which was used to qsort symtabs in reorder_symtabs. Instead, the latter now uses a temporary array (stack-allocated from an obstack, and then freed). (parse_symbol): Added a hack to fix up BLOCK_{START,END} if they haven't been set in the outermost stBlock of a procedure. This was a problem with f77 binaries on Ultrix 4.?. (new_symtab, new_symbol, new_type): Continue changing code to use obstacks more and otherwise conform to dbxread internal style. Made the free_code of symtabs be free_linetable (as in dbxread) instead of free_contents. This implies memory leaks when reading a new symbol table, until the conversion is finished. Did change (struct symbol) and (struct type) to be allocated on the symbol_obstack. Blocks and blockvectors are among the things still "leaking." * mipsread.c (parse_partial_symbols, parse_fdr): It hasn't been tested much, but it solved one problem (reported by Meissner), and cleans up some other things. The problem happened when an included file contains actual code (functions) and not just definitions. The mips coff is a little inconvenient there, since it may cause a procedure to be mapped to the wrong psymtab. * mips-tdep.c (heuristic_proc_desc): Minor cleanup. * mips-xdep.c (fetch_core_registers): Minor cleanup. FIXME, this will need work for the new core paradigm. Opcode patches from the net: * mips-opcode.h: fix incorrect disassembly of the mfc1, cfc1, and ctc1 instructions. Also, the cvt.d.w and cvt.s.w instructions were missing altogether - they are added here. From Bruce Bauman. * mips-opcode.h: The low mask for C0 instructions was too small. From Garrett Lau. I modified the fix to check the entire 32-bit opcode. * ns32k-opcode.h: Fix opcodes for deiw and deid. From Bruce Bauman. Thu Mar 21 12:56:46 1991 John Gilmore (gnu at cygint.cygnus.com) Roll in changes from Per Bothner (Tue, 25 Sep 90 11:11:04): * dbxread.c (read_type): Pointer subtraction (value_sub in valarith.c) sometimes failed because the types of the pointers being subtracted were not identical. These differed because dbxread.c was allocating pointer types using dbx_alloc_type+smash_to_pointer_type instead of lookup_pointer_type. I failed to find a justification for the former, so I changed it to use the latter. Similarly, I replaced smash_to_function_type by lookup_function_type, and smash_to_reference_type by lookup_reference_type. * mipsread.c (parse_symbol, upgrade_type, parse_procedure, _initialize_mipsread): corresponding changes. * symtab.c (smash_to_{pointer,reference,function}_type): eliminate. * source.c (mod_path): Do tilde_expand on each component of the path, rather than on the (list of) paths as a whole. (print_source_lines): Set first_line_listed in addition to current_source_symtab and current_source_line. If the source was not findable, after a "dir" command to fix the problem, a "list" would get the wrong lines. While I was there... (gnu): * dbxread.c (read_type): Change error to complaint. Thu Mar 21 12:56:46 1991 John Gilmore (gnu at cygint.cygnus.com) First attempt at detailed understanding of symbol table memory alloc. * dbxread.c (dbx_symfile_read): Free our string table if we aren't the mainline. Free the "info" struct since we're done with it. (init_psymbol_list): Free any previously allocated psymbol lists. (): FIXME: Should realloc-down the psymbol lists when done reading the main symbol file? * symmisc.c (free_symtab): Free fullname field too. * xm-hp300hpux.h (USG): #undef then #define so Makefile can -D. (REGISTER_ADDR): Make result type unsigned int. * xconfig/{i386*,hp300hpux,altosgas,altos}: All config files that define REGEX must also define REGEX1 (its dependency). Tue Mar 19 21:28:57 1991 John Gilmore (gnu at cygint.cygnus.com) * tconfig/i960: No longer works, points you at vxworks960 or nindy960. * xgdb.c, XGDB-README: Remove file. Users can get the much better xxgdb. * Makefile.dist: Remove all trace of xgdb. * breakpoint.c (breakpoint_1): Pass demangle arg to print_address_symbolic. (clear_breakpoints): Remove unused function. (breakpoint_re_set_one): Guts of breakpoint_re_set. (breakpoint_re_set): Use catch_errors to do them all anyway. * gdb-int.texinfo (Host versus Target): Add section on what is a "host" feature versus what is a "target" feature. * infcmd.c (path_command, path_info): Handle the PATH variable (object search path) as conveniently as the source search path. * environ.c (set_in_environ): Set some vars in GDB's environment, in addition to the child's. PATH, G960BASE, G960BIN for starters. * source.c (mod_path): New function, from guts of directory_command, modifies a path. Used by path_command. (directory_command): Call it. * defs.h (strsave): Declare. * utils.c (sevenbit_strings): Add new printing option. (printchar): Use it. (strsave): Provide this handy helper routine. (set_width_command): Rename set_screen_width_command. (_initialize_utils): "set screen-width" => "set width"; "set screen-height" => "set height"; add sevenbit-strings. * infcmd.c (do_registers_info): Print floating point registers in raw hex as well as float format, regardless of whether it is a "virtual" convertible register. * tm-sparc.h (PRINT_REGISTER_HOOK): Print every pair of float regs as a double, just in case it's being used that way. * values.c (unpack_long): Comment on array/function coercion. (unpack_double): Argument is in target byte order now. For integer arguments, just call unpack_long and float the result. * m68k-tdep.c: include defs.h for "const" handling. * remote-nindy.c: Use ieee-float stuff. (nindy_fetch_registers): Unpack double regs to host double, then to extended. (nindy_store_registers): Pack extendeds to host double, flip around by misusing unpack_double, send as target double. * tm-vxworks68.h (FRAME_CHAIN): Handle current frame pointer of zero, as when stopped at the first instruction of a process. * blockframe.c: Fix filename in comment (param.h => tm.h). * sparc-tdep.c (skip_prologue): More explicit nudging comments. * tm-68k.h: Fix typos. Fri Mar 15 01:09:34 1991 John Gilmore (gnu at cygint.cygnus.com) Changes from a bringup on the DEC Vax under Ultrix 4.0. * coredep.c (fetch_core_registers): Pass end-address of register section to register_addr as expected. Don't call supply_register if we'd just pass it garbage. * dbxread.c (read_dbx_symtab): Skip N_NSYMS on Ultrix. * exec.c (xfer_memory): Use boolean xfer_fn result, not int. * target.c (push_target, target_info): Cast enums to int for < or > comparison. * stack.c (print_frame_info): Identify source file & line even if we can't print it. * xm-vax.h (MISSING_VPRINTF): No longer missing in Ultrix V4.0. Sat Mar 9 10:08:20 1991 John Gilmore (gnu at cygint.cygnus.com) Clean up IEEE floating point support. * ieee-float.h: New file. * ieee-float.c: Write real routines to convert between host doubles and various target IEEE extendeds. * m68k-xdep.c: Eliminate assembler code for extended floats. * xconfig/{3b1,altos,altosgas,hp300bsd,isi,news,news1000,sun2os3, sun2os4,sun3,sun3os3,sun3os4}: Eliminate use of m68k-xdep.o. * tm-i960.h, tm-68k.h (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Use ieee_extended_to_double and double_to_ieee_extended. * i960-tdep.c: Define ext_format_i960. * m68k-tdep.c: Define ext_format_68881. * sparc-tdep.c: Define ext_format_sparc, though unused. * Makefile.dist (HFILES): Add ieee-float.h. * inftarg.c: #include "ieee-float.h" for the REGISTER_CONVERT macros. Obsolete the "coffstrip" program in favor of using BFD's strip. * nindy-share/coffstrip.c: Remove file. * nindy-share/nindy.c (coffstrip): Routine to run bfd_strip. * Makefile.dist: Remove references to nindy-share/coffstrip.c. * tconfig/nindy960: Remove reference to coffstrip.o. * Makefile.dist: Roll version number to 3.94.1 (not yet final). Wed Mar 6 09:56:45 1991 John Gilmore (gnu at cygint.cygnus.com) * symfile.h: Add symfile_bfd, common between dbxread and coffread. * dbxread.c: Remove static symfile_bfd. * infcmd.c (do_registers_info): Add PRINT_REGISTER_HOOK, though it is not used yet. * inftarg.c (child_detach): Pop the child_ops vector if the detach is successful. * remote-nindy.c (nindy_create_inferior): Don't push a new nindy_ops since nindy uses the same one for execution and memory examination anyway. * core.c (core_ops): Use child_attach and child_create_inferior rather than default attach and create_inferior functions. Handle floating point registers in core files. * sparc-xdep.c (fetch_core_registers): Rewrite for float support. * sun3-xdep.c (fetch_core_registers): Rewrite for float support. This version untested since BFD doesn't yet support sun3 core files. * hp300hpux-xdep.c: Rewrite fetch_core_registers to new calling conventions. Fix comments and style. This version has not been compiled yet, since we have no HP inhouse. * core.c (get_core_registers): Look for two sections, ".reg" and ".reg2", and pass both to fetch_core_registers sequentially. Revise directory path yet again. * source.c (forget_cached_source_info): Not static any more. (init_source_path): New default source path is "$cdir:$cwd". (dir_command): Handle variable arguments ($cdir, $cwd). (source_info): Print "Compilation directory" rather than "Originally compiled in" to remind people of $cdir. (openp): If the path contains $cwd, use current directory. (open_source_file): If compilation directory is known, replace first $cdir in path with the compilation directory. (print_source_lines): Even if we can't print the lines, set the current symtab and line for future commands like "info source" or "breakpoint". Also, error message now contains the file name, line number, and file access error message. (_initialize_source): Fix help text to describe changes. * main.c (cd_command): Forget cached source info when we chdir. * utils.c (strstr): Add simple implementation. Tue Mar 5 01:41:40 1991 John Gilmore (gnu at fowanton.cygnus.com) * coffread.c (read_one_sym, init_linetable, init_stringtab): Byte-swap COFF symbol tables if necessary when reading them in. Use complain() to replace error message in one spot. Needs corresponding change in bfd/coff-code.h to make some symbol swapping routines non-static. Mon Mar 4 00:53:40 1991 John Gilmore (gnu at cygint.cygnus.com) Merge changes from Eirik Fuller, for UTek. * defs.h (errno): Add declaration. * altos-xdep.c, arm-xdep.c, convex-xdep.c, gould-xdep.c, hp300hpux-xdep.c, infrun.c, inflow.c, infptrace.c, i386-tdep.c, i386-xdep.c, pyr-xdep.c, mips-xdep.c, remote-eb.c, remote-nindy.c, remote-vx.c, source.c, standalone.c, stuff.c, sun386-xdep.c, symmetry-tdep.c, symmetry-xdep.c, umax-xdep.c, utils.c: Eliminate declarations of errno. * remote-eb.c: Define B19200 and B38400 as EXTA and EXTB. * remote-vx.c: Include for UTek; Sun gets it via and . Sat Mar 2 15:47:55 1991 John Gilmore (gnu at cygint.cygnus.com) * i960-tdep.c (examine_prologue): Add new argument limit, which stops the scan at the end of the prologue, or at the PC. This fixes a problem where it walks down into the code for the user's statements if that code looks like function prologues. Mark Fox and I have been bouncing this code back and forth, making small changes to it. Callers changed to match. Tue Feb 26 01:47:07 1991 Cygnus John Gilmore (cygnus at yuba) Cleanup for gdb-3.94 release final: * Makefile.dist: Remove remote-vx.c, remote-nindy.c, and all the .c files from vx-share and nindy-share, from the various macros, since they are not found via ALLDEPFILES. (SFILES): Add tm-i960.h. (alldeps.mak rule): Break out ALLDEPFILES_MAINDIR and ALLDEPFILES_SUBDIR. List all the nindy and vxworks subdir files in the SUBDIR list. (TAGFILES_MAINDIR): Change ALLDEPFILES to ALLDEPFILES_MAINDIR. (gdb.tar.Z): Use ALLDEPFILES_SUBDIR as well as SFILES_SUBDIR. Mon Feb 25 16:02:35 1991 Cygnus John Gilmore (cygnus at oldman) * am29k-tdep.c: Add contribution line. (examine_prologue): Cache information about function prologues in the misc-function-vector to avoid lots of references over the serial line while examining instructions. * core.c (core_close): New function made from cleanup_core. * core.c, exec.c, inftarg.c, remote-eb.c, remote-nindy.c, remote-vx.c, remote.c, target.c, target.h, Update target_ops vector to add attach, close, and load entries. Use add_syms_addr_command, not add_file_addr_command, for add_file. Break out close routine from existing code. * dbxread.c (really_free_pendings): Don't free pending_blocks; they are in an obstack. (read_dbx_symtab): Relocate end_of_text_addr in the psymtab. Lint. (define_symbol): Add symbol type parameter; change callers; pass type parameter to DBX_PARM_SYMBOL_CLASS macro to allow it to influence the symbol class on the i960. (define_symbol): Swap LOC_CONST's into target byte order. * exec.c (exec_close): New function. (exec_file_command): Call it. * findvar.c (read_relative_register_raw_bytes): Doc byte order, Fix byte order of frame pointer. (read_var_value): Result of 0 if var's value can't be found, e.g. missing FRAME_ARGS_ADDRESS. Byte-swap LOC_CONST and LOC_LABEL values to target order. Add LOC_LOCAL_ARG. (locate_var_value): Use read_var_value and use its lazy address as the location of the var's value. Lint. * i960-pinsn.c (next_insn): Add routine from vxgdb for scanning instructions. * i960-tdep.c (arg_address, i960_frame_find_saved_regs): Remove obsolete Intel versions in favor of vxgdb versions. (check_host, byteswap, byteswap_val, reorder_val): Eliminate code dealing with byte order of values, which Intel did in host byte order rather than gdb-4's target byte order. (i960_frame_chain_valid): Move to nindy-tdep.c. (examine_prologue, skip_prologue, frame_find_saved_regs, frame_args_address, leafproc_return, saved_pc_after_call, pop_frame): Add vxgdb versions from Mark Fox. (examine_prologue, frame_struct_result_address): Add code to deal with the saved value of G13 (struct return address pointer). (frame_args_address): Modify Mark's version to prefer the saved value over the current value in the topmost frame. Cache result in the frame info to avoid performance hair in callers. (print_fault): Add gdb960 code for printing faults. (_initialize_i960): Actually call check_host. * ieee-float.c (ieee_extended_to_double, ieee_double_to_extended): add stub routines. FIXME, these currently just return zero! * infcmd.c (program_info): Use PRINT_RANDOM_SIGNAL. (attach_command): Call target_attach, not target_open, now. * infrun.c (normal_stop): Make global, not static, for vx_attach. (child_attach): Rename from child_open. (wait_for_inferior): Use PRINT_RANDOM_SIGNAL. If stop_pc is zero, don't confuse it with a zero step_resume_break_address. * inftarg.c (child_detach): Eliminate inferior_pid test. (child_files_info): Clean up message a bit. (child_ops): Use child_attach, not child_open, to attach. * mem-break.c: #ifdef out the whole file if BREAKPOINT is not set (e.g. on VxWorks or NINDY). Move read_memory_nobpt from findvar.c to here, since it depends on the contents of the shadow_contents of breakpoints, but keep if #if 0 since it is never called. * nindy-tdep.c: New file, contains nindy_frame_chain_valid, moved from i960-tdep.c. * printcmd.c (address_info): Handle LOC_LOCAL_ARG. Lint. (ptype_command, display_command): Eliminate have_inferior_p and have_core_file_p in favor of target_has_stack or target_has_execution. (print_frame_args): Handle LOC_LOCAL_ARG. Eliminate duplicate code for actually finding the values of arguments, though we still keep track of the maximum stack offset for use in printing unnamed arguments. Handle missing FRAME_ARGS_ADDRESS. * remote-nindy.c (i960_print_fault): Move to i960-tdep.c. (struct nindy_regs): Define registers passed to/from nindy. (nindy_fetch_registers, nindy_store-registers): Translate between nindy and GDB formats for the registers. (dcache_init): Statically allocate the cache, since it was being allocated by a malloc that was never freed anyway. (nindy_create_inferior): Error, not core dump, if no exec file. (nindy_before_main_loop): Use target_load, not target_add_file. * remote-vx.c (net_load): Specify large timeout for load requests. Allow user to break out with INTERRUPT. (net_break): Remove useless code, clean up. Change callers. (parse-args, skip_white_space, find_white_space): Clean up arg parsing to cope with quoted strings. (net_wait, net_quit): Never call error, just return status. (vx_read_register, vx_write_register): Cleanup status checking. #ifdef the code based on which CPU we are using (960 or 68k), FIXME, this should be completely general but it isn't yet. (vx_xfer_memory, vx_resume): Cleanup status checking. (vx_run_files_info): Improve message. (vx_load_command): Renamed from vx_add_file_command. Allow load to be interrupted. (net_ptrace): Remove unused routine. (vx_wait): Adopt code from vxgdb960 to cope with broken connections to target machine and prompt to disconnect. Remove debug printouts. Map some EVENT_'s to SIGnals. (add_symbol_stub, vx_open): Print names of object files we found, and "ok" if we read their symbols OK. Clarify output in general. (vx_attach, vx_detach, vx_kill): Add these commands. (vx_convert_from_virtual, vx_convert_to_virtual): Simplify. (vx_run_ops): Turn off all_mem, to avoid spurious msg in the "info files" output, and create_inferior, since we already have an inferior. * stack.c (frame_info): Replace Frame_unknown with 0. (print_frame_arg_vars): Handle LOC_LOCAL_ARG. (return_command): Pop until the PC matches as well as the FP, so it works even if the FP is shared with another function, as in "frameless" or "leaf" procedures. * symfile.c (load_command): renamed from add_file_target_command. (add_syms_addr_command): renamed from add_file_addr_command. (add_syms_command): Stub to call target_add_syms. (_initialize_symfile): Change command names and descriptions, add-file => add-syms, and load from alias to its own command. * target.c (kill_or_be_killed, maybe_kill_then_attach, maybe_kill_then_create_inferior): Default for attempts to start a process, if one is already running, is to ask about killing it and retry if yes. (upstack_create_inferior): #if-0 it, strata obsolete it. (push_target, unpush_target, pop_target): to_close() a target before unstacking it. (target_info): Renamed from target_files_info. (_initialize_targets): Rename "i files" as "i target", accessible under both names. * target.h: Improve comments about the target_ vectored routines. * tm-i960.h: Remove NINDY-specific stuff to tm-nindy960.h. Convert commenting style to standard GNU style. (DBX_PARM_SYMBOL_CLASS): allow LOC_LOCAL_ARG's to be recognized. (SKIP_PROLOGUE): No longer a no-op. (SAVED_PC_AFTER_CALL): Now handles leaf procedures. (*_REGNUM): Sort register numbers. (REGISTER_BYTES, REGISTER_BYTE, REGISTER_RAW_SIZE, MAX_REGISTER_RAW_SIZE, REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Float regs are now 10 byte extendeds, not 8 byte doubles. (FRAME_CHAIN_VALID): Make this config-dependent, since it differs for nindy versus vxworks targets. FIXME, this should possibly go in the target vector. (EXTRA_FRAME_INFO, INIT_EXTRA_FRAME_INFO): Cache both frame_saved_regs and arg pointer with each frame. (FRAMELESS_FUNCTION_INVOCATION): New leafproc support. (FRAME_ARGS_ADDRESS): Use cached result. (FRAME_ARGS_ADDRESS_CORRECT): New, avoids g14 guessing. (FRAME_FIND_SAVED_REGS): Change arg to subsidiary fn. (PRINT_RAMDON_SIGNAL): Call print_fault. (POP_FRAME): Now works. * tm-nindy960.h: Break this off tm-i960.h. NINDY-specific option parsing and startup; STACK_END_ADDR, FRAME_CHAIN_VALID, BREAKPOINT, and DECR_PC_AFTER_BREAK are here. (ADDITIONAL_OPTION_HANDLER): use target_load, not target_add_file. * tm-vxworks960.h: Break this off tm-i960.h. VxGDB specific startup; DECR_PC_AFTER_BREAK, and FRAME_CHAIN_VALID are here. * valarith.c (value_subscripted_rvalue): Avoid handling floats and doubles specially; it gave alignment errors. Lint. * valops.c (value_of_variable, value_of_this): Error if unknown value. * valprint.c (print_floating): Bcopy rather than pointer-deref, to avoid alignment problems. (value_print): Handle unknown value address. (cplus_val_print): Two args are ignored; remove them. Change caller. (val_print): Use unpack_long rather than pointer-deref. * values.c: Lint. (unpack_long, unpack_double): Use bcopy rather than pointer-deref to avoid alignment problems. (value_being_returned): Error if return value unknown. (set_return_value): Add bogosity warning, FIXME. * * TODO: A woman's work is never done. * Makefile.dist: Distribute REMOTE_OBS into tconfig files. Separate INCLUDE_CFLAGS for use with lint. Add LINTFILES. Add ieee-float.o to OBS. * tconfig/{nindy960,vxworks68,vxworks960}: Include the desired REMOTE_OBS remote-interface files in the TDEPFILES and TM_FILE. * tconfig/i960: FIXME. Half-merge, produce warning if config'd. Changes to generalize the VxWorks RPC protocol slightly, to handle i960 as well as 68000. * vx-share/dbgRpcLib.h (VX_SOURCE_STEP): Add. * vx-share/reg.h: Produce i960 regs #ifdef I80960 * vx-share/xdr_ptrace.c: Skip FPA registers if 960. * vx-share/xdr_rdb.h: Add SOURCE_STEP struct and xdr decl. * vx-share/xdr_rdb.c: Add xdr_SOURCE_STEP routine. * vx-share/xdr_regs.c: Add xdr_regs, xdr_fp_status, xdr_ext_fp for i960. Change xdr_vectors to xdr_opaques for 68k registers, so they will move in target byte order rather than network byte order (happens to be the same). Mon Feb 25 03:41:44 1991 John Gilmore (gnu at cygint.cygnus.com) * tm-convex.h (END_OF_TEXT_DEFAULT): Remove #if 0'd block. Sun Feb 24 00:55:53 1991 John Gilmore (gnu at cygint.cygnus.com) * am29k-pinsn.c, Add contribution lines to various files, showing where they came from. * breakpoint.c (break_insn, check_break_insn_size, read_memory_nobpt): Remove to mem-break.c. * xm-*.h, param-no-tm.h, tm-29k.h, valprint.c: Change BYTE_ORDER to HOST_BYTE_ORDER. * tm-29k.h (STAB_REG_TO_REGNUM): Warn user if symbol table entry has bad register number. This change is not tested in this release, FIXME. * frame.h: Eliminate Frame_unknown in favor of a simple zero. tm-vax.h: Ditto. * value.h: Force value's contents field to be aligned to hold at least a double or a long long (if supported). This avoids doing bcopy's in and out of the contents field. (step_1): Avoid coredump under obscure circumstances when we have no frame. * symtab.h (misc_info): Add field to misc function vector for any kind of cached information the target code desires. AMD 29000 uses this to avoid repeating examine_function_prologue's. * coffread.c: Lint. Remove static symfile, read_section_header. core.c (have_core_file_p): Lint: remove. expprint.c (print_subexp): Lint. infptrace.c, valops.c, valprint.c: lint. Roll in changes from vxgdb-5.0.1: * symtab.h: Comment byte order of each address class. Add LOC_LOCAL_ARG for frame-relative args (960). expread.y: Use LOC_LOCAL_ARG where LOC_ARG is used. symtab.c, symmisc.c: ditto. * infrun.c (init_wait_for_inferior): Clear stop_signal. * remote.c (remote_resume): Error if resume with a signal. * symfile.c (prim_record_misc_function): Clear misc_info. (fill_in_vptr_fieldno): Check stub type of arg. * valops.c (value_cast): Avoid looking up names of types whose name we don't know, to prevent coredump. Sun CC produces typedef rtx and the name of *rtx is zero... Mon Feb 18 21:16:25 1991 John Gilmore (gnu at cygint.cygnus.com) Roll in changes from final AMD 29000 port (Tiemann). tconfig/am29k: Add COFF_ENCAPSULATE and TARGET=TARGET_AM29K for ../include/a.out.encap.h. This might not work now that BFD is separately compiled. Instead, BFD support for encap will have to translate machine type 29k into the right COFF_MAGIC. * infcmd.c: Remove references to inferior_pid that aren't used in actual ptrace calls; use target_has_execution, etc. (have_inferior_p): Remove function. (program_info): Print target info rather than "process number"; avoid gratuitous messages unless from_tty. (run_stack_dummy, finish_command): Set proceed_to_finish. infrun.c: Remove inferior_pid refs. Decl & init proceed_to_finish. main.c: Lint. Lose have_inferior_p(). inferior.h (have_inferior_p): Remove, lint. (proceed_to_finish): Add flag to ask that all regs be saved by normal_stop, for the few commands that need it, speeding up serial I/O. Add comments to stop_registers. * remote-eb.c: Remove newline from breakpoint message we grep for. Never time out when running the user program. Wed Feb 13 15:34:40 1991 John Gilmore (gnu at cygint.cygnus.com) Roll in changes from vxgdb-5.0.1: * dbxread.c (read_dbx_symtab): If we encounter a "FORTRAN COMMON" symbol in its raw form, we are processing an unlinked ".o" file. See if the target environment has assigned it an address, using target_lookup_symbol (VxWorks does), and enter it into the symtab that way. * tm-vxworks.h (FRAME_CHAIN, FRAME_CHAIN_VALID): Override usual 68k versions for a simpler version that assumes zero FP at bottom. Fixes bug of truncated stack reports. * target.h (target_lookup_symbol): Define this routine's args and result, finally. * target.c (nosymbol): Default routine for target_lookup_symbol. (target_default): Default lookup_symbol and call_function too. (files_info): Only print has_all_memory warning if a non-dummy target follows. * remote-vx.c (vx_read_register, vx_convert_to_virtual, vx_convert_from_virtual): If target does not have floating point, zero register "values", and avoid doing cross-net conversions. (vx_lookup_symbol): Rename net_lookup_symbol, add to vectors. (vx_open): Rearrange code that attaches to target and reads symbols for all loaded modules, to work if some of the modules are not accessible. Add symbol_stub() and add_symbol_stub() as callbacks from catch_errors(). Allow connect attempt to be interrupted painlessly with ^C (FIXME, there are still some bugs if the interrupt happens during symbol reading.). Print final message with puts_filtered, since symbol messages are now filtered too. Misc cleanup: * main.c (catch_errors): Only print errstring if non-null. (command_loop): Avoid an ioctl per command to test ISATTY. * remote-vx.c (net_load): make static; avoid sophomoric msg. (vx_xfer_memory): Return correct result! (vx_files_info): Indicate whether target has float or not. (vx_lookup_symbol): Complain, not error, if target gone. (vx_open): Print "Connected" msg before disabling immediate-quit. [FIXME: lookup_symbol and vx_open changes need testing.] target.c, remote-eb.c, inftarg.c, am29k-opcode.h, target.h, tm-29k.h, tmm-vxworks68.h, symfile.c, gdb-int.texinfo: Add contributor lines and update copyrights to 1991. Changes from an attempted H-PUX host port: * infptrace.c (PT_ATTACH, PT_DETACH): Handle HP/UX, which defines PT_ATTACH and PT_DETACH but not PT_KILL. * remote-eb.c (eb_open): Misplaced endif kills sysv H/PUX. * remote-vx.c: include for HPUX. * hp300hpux-xdep.c (fetch_core_registers): Rewrite old "core_file_command" routine to BFD regime. May not work yet. Attempted port of "gdb-3.4 Van Jacobson xgdb" to modern gdb. * xgdb.c: Replace X10 version with some VJ version. (FIXME: Its copyright assignment is not on record.) * xgdb.c: Update include files to X11R4 (Xaw crud). (xgdb_display_source, create_text_widget): fix call to get_filename_and_charpos. Rewack source window stuff for X11R4 (gleaned from include files, and "nm's" of binary libraries, since I had no doc available). (append_selection, append_selection_word): Disable with FIXME since R4 changed interface here. (create_buttons): Add back the old set of buttons. (xgdb_create_window): Fix call to XtInitialize (&argc not argc). * Makefile.dist (xgdb, xgdb-init.c): Update for X11R4 on Suns. Roll VERSION to 3.94 (not yet final though). Sat Feb 9 09:46:25 1991 John Gilmore (gnu at cygint.cygnus.com) * obstack.h (obstack_ptr_grow, obstack_ptr_grow_fast, obstack_int_grow, obstack_int_grow_fast): Eliminate cast on left of assignment, which gives MIPS cc fits and is not Standard C. * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by F_ALIAS. Use printf, not fprintf, when not passing a file pointer... (compare_opcodes): Check that identical instructions have identical opcodes, complain otherwise. * sparc-opcode.h (st %fsr): Fix opcode "lose" mask. This was reported by Roland McGrath. (unimp): Only match if exactly zero instruction. (Roland) (branches and traps): Generate all variations of these instructions with macros, based on a single call that defines each condition name and its binary representation. (set): Turn on alias bit, to avoid test in sparc-pinsn.c. * valprint.c (val_print_fields): Take, and use, format parameter. This means that "p/x struct" again prints the elements in the desired format. Changed callers. * stack.c (frame_info): Use filtered output, and indicate wrap points. Remove kludgy formatting designed to avoid line wrap. * utils.c (wrap_here): If the line is already full (because we had printed a long indent or long wrapped string), do an immediate newline-and-indent. * m68k-pinsn.c (print_insn_arg): Bugfix from ntmtv!thompson@ames.arc.nasa.gov (Mike Thompson): 'bkpt #0' instruction is incorrectly disassembled as bkpt #8. * dbxread.c (end_psymtab): Bugfix from Peter Schauer : If you want to set a breakpoint in a *.y file gdb will say Reading in symbols for *.y... and then will dump core (sometimes). I traced it back to an uninitialized symfile_name in psymtab_to_symtab. (const_vol_complaint): Add quotes to message. (define_symbol): Only believe line number if gcc_compiled. Avoid allocating symbol if we will not return it. Add target strata support so that newly established targets go into their right place in the target stack (e.g. a new exec file doesn't wipe out the ability to access the running process). * target.h, core.c, exec.c, inftarg.c, remote-eb.c, remote-nindy.c, remote-vx.c, remote.c, target.c: Add to_stratum and initialize it properly in all the targets. * target.h: Document strata. Change return type of push_target. * target.c (nomemory): new function for dummy memory access. (tcomplain): Rename complain, now also used in symfile.c. (push_target): Push targets within strata. New return value shows whether new target is on top of stack or not. Always keep dummy target on stack. (target_files_info): Ignore dummy target. * core.c (core_open): Warn user, and skip accessing file, if the core target is not the topmost target in the stack. * remote-nindy.c (nindy_create_inferior): Avoid unpush_target, now already handled. * remote-vx.c: Remove vx_prepare_to_store from vxworks memory target_ops, it doesn't belong there since we have no regs there. Change name of target from machine => memory to clarify. Thu Feb 7 16:32:09 1991 John Gilmore (gnu at spiff.cygnus.com) * Freeze version 3.93 for release. * Makefile.dist: Handle vx-share and nindy-share subdirs properly when building gdb.tar.Z. * symtab.c: lint; add no_symtab_msg to consolidate the messages printed in various places, so I could change just one copy. * dbxread.c, coffread.c: Change references to bfd->iostream to cast to FILE *, now that BFD avoids needing types defined in other header files. Tue Feb 5 21:39:35 1991 John Gilmore (gnu at cygint.cygnus.com) * command.c, dbxread.c, expprint.c, infcmd.c, infptrace.c, infrun.c, printcmd.c, remote-nindy.c, source.c, sparc-tdep.c, sparc-xdep.c, symfile.h, symmisc.c, utils.c, valprint.c: Lint (actually gcc -Wall). * dbxread.c: Remove first_global_sym, last_global_sym, since they are never referenced. * defs.h (baud_rate): Declare. main.c: Define it, and add the -b option to set it. * gdb-int.texinfo: Add text on how to define a new host or target architecture, prompted by Per Bothner's questions about MIPS support. * gdb.texinfo: Document "complaints". Change doc of -q since gdb no longer prints the copyright and blurb if you specify a file name to be debugged (just like Emacs). Add doc for Nindy-specific command line flags for specifying target serial port and such. Update copyright to 1991. * gdbcore.h: Remove a large mass of now-useless crud, since BFD has taken over for us the job of ripping up executable files. The crud caused Per Bothner's port to not compile. * infrun.c (normal_stop): Avoid printing "Program exited normally" if we are in batch mode. This allows a GDB which executes a program on a target system, to behave like a Unix command (input from stdin, output to stdout, no extraneous output). * main.c (main): Allow additional machine-dependent command line options to be specified with the ADDITIONAL_OPTIONS, ADDITIONAL_OPTION_CASES, ADDITIONAL_OPTION_HELP, and ADDITIONAL_OPTION_HANDLER macros. Also allow machine-dependent processing to occur just before the main loop with BEFORE_MAIN_LOOP_HOOK. (main): If a "core file" argument is specified, and it is not a core file, try it as a process ID to attach. (symbol_completion_function): Attempt to cope with "show screen-" TAB, not very successfully. This needs more work, FIXME. (batch_file): New function, returns whether we are reading commands from an interactive tty on stdin, or from somewhere else. Called by normal_stop since it doesn't get from_tty passed down to it like many commands do. * remote-nindy.c: Handle command line options for nindy connection. (nindy_before_main_loop): Prompt user for tty name if they don't specify it before getting to the interactive command loop. * tm-i960.c: Add ADDITIONAL_OPTIONS, etc, to handle -O, -brk, and -r command line options. Also add hook before main loop to make it easy to specify a tty. * TODO: More things to do, one done. Mon Feb 4 23:57:39 1991 John Gilmore and Mike Tiemann (at cygint.cygnus.com) * dbxread.c: Make complaint() calls pass pointer, not struct. Add complaints about badly formatted C++ type information (const/volatile indicator, and parse errors resulting in error_type). Fix C++ virtual member fn comment. (read_struct_type): Avoid bumping pointer if we got a parse error; this prevents our walking beyond the end of a string. Terminate loop on null char as well as semicolon. (process_one_symbol): Fix the LBRAC fix so that it uses the last previous SLINE, FUN, or SO record's PC address. C++ debug symbols did not have SLINE records in a useful order compared to the LBRAC records. (define_symbol): Handle "catch" records. * symtab.c (check_stub_type): Added new complain `stub_noname_complain' and added a consistency check to keep the debugger from crashing when finishing from an exception frame. A real fix will be needed later. Sat Feb 2 10:43:05 1991 John Gilmore (gnu at cygint.cygnus.com) * infcmd.c (attach_command): Make global. * Makefile.dist (REMOTE_OBS): Make these compile by default, but make them easy to comment out. Perhaps later they should be enabled by what CPU you configure for? FIXME. (VERSION): Roll to 3.93. (pinsn.o): Remove rule for obsolete file. (dbxread.o,coffread.o,mipsread.o): Use ${srcdir} explicitly. Run down a problem that manifested by printing the wrong function name in stack traces of read_ofile_symtab. Turned out that the problem was the SunOS 4.1.1 (and previous) C compiler outputs the LBRAC symbol with an address in the *data* segment, which blew our binary search through the blocks. * dbxread.c: Use the complain() facility consistently to bitch about problems in the symbol file we are reading. (finish_block): Add code to check the nesting of the blocks; complain and Procrust them to fit if wrong. (make_blockvector): Check the order of the blocks, complain [but don't cope] if wrong. (process_one_symbol): ifndef SUN_FIXED_LBRAC_BUG, check LBRAC symbols to be sure their PC value is greater than the last SLINE (line number) symbol we've seen, complaining and adopting the SLINE PC value if wrong. * symfile.h (struct complaint, complaint_root, complain, clear_complaints): Add. * symfile.c (complain, complaint_root, clear_complaints): Add facility to deal with non-fatal complaints and to regularize their suppression. (symbol_file_add): Clear complaint counters to allow new complaints. (initialize_symfile): Add 'set complaints' and 'show complaints'. * dbxread.c (dbx_symfile_read): Remember the address and size of the string table for the main symbol file, so we won't read it more than once. (dbx_psymtab_to_symtab): Fix the check for main symbol file, to avoid reading the string table yet again. Lint. (throughout): Improve filtered output, including word wrap. (read_range_type): Improve Bothner's fix to handle other types too. * utils.c: Improve line wrap implementation. Handle unlimited width by making chars_per_line unsigned. (puts_filtered): New, easy, function. * defs.h (puts_filtered): add. * mipsread.c (compare_symbols, sort_symtab): Remove these fns, call the identical sort_symtab_syms() in symfile.c instead. * expread.y: Suggest the `file' command rather than `symbol-file'. * command.h (enum var_types): Add zinteger for seroable unsigned integer. * command.c (do_setshow_command): Handle var_zinteger. Restructure nested if's into a switch. * breakpoint.c (bpstat_print): If bpstat "print" flag is not set, we did not stop because of a breakpoint (it must have been for some other reason, like a "stepi"), so don't print anything. * symtab.c: Include all the time. Now that BFD doesn't include , old SunOS's require it for . Sat Feb 2 10:39:15 1991 Per Bothner (bothner@cs.wisc.edu) A test port of gdb-3.92.6 to the Sony NEWS. * Makefile.dist Don't normally link in remote- or vx stuff. Some of it doesn't compile, and it wastes space for 99% of the users. Remove reference to no-longer-used HAVE_VPRINTF. Fixed BFD_DEP typo to BFD_DIR. * dbxread.c Fix cast in arg to bfd_h_getlong. Make char *prefix be const. Fix how certain range types are mapped into builtin unsigned int types. * infrun.c Remove 2 #includes. They cause errors (on Sony, at least), and aren't needed (they wern't in earlier versions). * printcmd.c print_address_symbolic should never demangle labels (since it prints *assembler-level* labels). [This was superseded by the change to printcmd below.] * utils.c Add some "volatile" return types to avoid warnings. If MISSING_VPRINTF add vprintf function and not just macro (since vprintf is used in printcmd.c). * valprint.c Unless __GNUC__, use obstack_grow instead of obstack_ptr_grow. (The latter isn't grokked by some PCC-based compilers.) [This change is in abeyance, we prefer to fix obstack_ptr_grow.] Make chunk size of dont_print_obstack 32*4 instead of default 4096. * nindy-share/coffstrip.c Added some forward declarations (otherwise, gcc complains about implicit extern redefined as static). Sun Jan 20 02:38:19 1991 John Gilmore (gnu at cygint.cygnus.com) Changes inspired by Per Bothner: * printcmd.c (print_address_symbolic): Take additional parameter specifying whether to demangle. (print_address): Pass in asm_demangle to control demangling. (print_address_demangle): New fn, takes explicit arg to control demangling. * utils.c: Add new vars demangle and asm_demangle, and let them be set and shown. (fputs_demangled): If !demangle, just print the argument. (fprint_symbol): If !demangle, just print raw symbol. * valprint.c (val_print): Call print_address_demangle rather than print_address, to cause demangling to depend on the global rather than assembler-level demangling setting. * WHATS.NEW, gdb.texinfo: Document. * main.c (show_command): Show all settings if no arg. (initialize_main): Make "info set" the same as naked "show". * command.c (cmd_show_list): Handle prefix commands in the list, and print the name of the setting as well as its English description and value. Allow gdb functions to specify where a line should wrap if it exceeds the size of a terminal line. Use it to make the output prettier. * utils.c (set_screen_width_command): New fn, mallocs a buffer of the right size when screen width changes. (set_screensize_command, screensize_info): Remove #if 0'd fns. (wrap_here): New fn, indicates a point in the output where we should wrap the line rather than just letting it overflow at a random place. (fputs_filtered): Implement wrapping. (n_spaces): New fn, returns a pointer to N spaces. (print_spaces_filtered): Use n_spaces. * defs.h (n_spaces): Declare. * stack.c (print_frame_info): Wrap with 4-space indent after fn name and before filename and line number. * printcmd.c (print_frame_args): Wrap with 4-space indent before each argument name is printed. * valprint.c (value_print): Wrap with no indentation before each repetition. (val_print_fields): Wrap with indentation relative to nesting level before each field name. (val_print): Wrap with nesting indentation before array elements. * command.c (do_setshow_command): Avoid extra newlines, wrap with 4-space indent around values printed, end with period. * WHATS.NEW, gdb.texinfo, gdb-int.texinfo: Document. * breakpoint.c (breakpoint_1): Implement addressprint for "info breakpoints" display. Change file name and line number format to " at file:nnn" rather than " (file line nnn)". * gdb.texinfo: Document. Fri Jan 18 07:21:25 1991 John Gilmore (gnu at cygint.cygnus.com) Frozen for gdb-3.92.6 release. README, WHATS.NEW: Update for 3.92.6 release. tconfig/{altos, i386v, i386v32, m88k, umax}: Eliminate coffread.o from configs since it is now built by default. tconfig/{3b1, altosgas, arm, convex, hp300bsd, hp300hpux, i386v-g, i386v32-g, isi, merlin, news, news1000, np1, pn, pyramid, symmetry, vax, vxworks68}: Eliminate dbxread.o from configs since it is now built by default. Makefile.dist: Update for release 3.92.6. Handle files that have been moved to ../include, ../getopt, or ../bfd. Add saber.suppress and tests directory. Add config.status to the release (it will say "none"). coredep.c: Minor formatting fixes. These changes were made in early December but only checked in now: * nindy-share/Onindy.c, nindy-share/coffstrip.c, nindy-share/nindy.c: lint * nindy-share/nindy.c (ninStopWhy): Don't byteswap the register values coming back from the target; we store values in target byte order everywhere. Wed Jan 16 19:01:37 1991 John Gilmore (gnu at cygint.cygnus.com) * am29k-opcode.h, am29k-pinsn.c: Add 29050 opcodes. * valprint.c (cplus_val_print, val_print_fields): New functions, which print C++ objects. They conspire to avoid printing a virtual base class more than once, following all the twists and turns of C++ virtual base rules. (val_print): Call the above rather than do it by hand. * symfile.c (symbol_file_add): Only reset symfile_mtime for main symbol file, not for added files like shared libs. This really needs to be generalized to a timestamp per file. * core.c (cleanup_core): Avoid coredump if no core file. * config.gdb: Accept -host or -target in place of +host or +target. * coffread.c (find_linenos): Avoid desupported BFD interface to line numbers. We still read them manually rather than using BFD's "generic" features. * gdbrc.tex, threecol.tex: Add GDB reference card and its formatting code. Makefile.dist: Add refcard to OTHERS list for creating tar files. * Makefile.dist: Eliminate use of $< in explicit targets. * readline/Makefile: Use $< rather than $*.c, which does not include the VPATH in GNU Make. * tconfig/i960-bout, tconfig/i960-coff: These are identical copies of tconfig/i960, added for global configuration compatability. All i960 versions can read both coff and b.out. * tm-88k.h: Fix multiline macro that lacked \'s. Remove COFF_FORMAT and COFF_CHECK_X_ZEROES since these are now handled automaticaly. * TODO: Think of more things to do. Wed Jan 2 19:09:29 1991 John Gilmore (gnu at spiff.cygnus.com) tconfig/{am29k,i960,sun2*,sun3*,sun4*}: Eliminate config of sdb versus dbx debug symbols. Add kludge for 68881 80-bit to 64-bit float conversion. tconfig/sun4, tconfig/sun3, xconfig/sun4, xconfig/sun3: Make equivalent to sun?os4 so global config works. Wed Jan 2 18:20:51 1991 John Gilmore (gnu at spiff.cygnus.com) Fix from Eberhard Mattes * main.c: Only declare linesize once; declare pagesize not at all, since it is never used. (main): Clear newly allocated line before it is used. Fri Dec 28 00:13:42 1990 John Gilmore (gnu at cygint) Further stabilization for the Intel 960. * Makefile.dist: Parameterize the location of the "include" and "bfd" directories, as well as "getopt". Add symfile.c. Link in both dbxread and coffread. Fix up "make depend" to rewack the locations of include, bfd, and getopt in its output. * README: Document moving include files, improve some of the other doc. * coffread.c: Move common code out to symfile.c. Change symbol_file_command style interface to use new *_symfile_init and *_symfile_read interface under BFD. Use BFD internal info to locate line table, symbols, etc. * core.c (core_fetch_registers): Rename to get_core_registers to avoid confusion with fetch_core_registers. (register_addr): Move to coredep.c, which is already machine dependent. This leaves core.c pretty clean of dependencies. * coredep.c (register_addr): Accept this routine from core.c. * dbxread.c: Move common code (with coffread.c, etc) into new symfile.c. Each psymtab now contains a pointer to the format-dependent function that knows how to read it in. Make some things static. (dbx_psymtab_to_symtab): Renamed from psymtab_to_symtab_2. (process_one_symbol): Add code to complain about a "compiler bug we muzzle here", if we actually see it. * eval.c (evaluate_subexp): Insert missing "break" statements in code that determines whether a variable is an lvalue in memory, register, or whatever. I detected this via a compiler bug in which it *almost* mashed out the whole switch statement. * gdb-int.texinfo: Add minor sections on configuring gdb for release, and about the README file. * infcmd.c (registers_info): Fix formatting somewhat. Still not as pretty as before, but it handles byte swapping. * remote-nindy.c: If data cache routines are interrupted while waiting for the remote end, be sure that any uninitialized cache blocks are on the free list, not on the valid list! * symfile.h: Flesh out this header file with all the various routines and variables that have been merged in from dbxread.c coffread.c, and symtab.c to symfile.c. * symfile.c: New file, containing code common to dbxread.c, coffread.c, and some code from symtab.c. All generic code for reading symbol files should be in here now. (unrecord_misc_function): Remove unused function. * symtab.h: Remove file-reading things to symfile.h. * symtab.c: Remove file-reading things to symfile.c. * tm-i960.h: Fix FRAME_CHAIN types; define PRINT_RANDOM_SIGNAL to decode i960 fault types. * target.h, remote.c, remote-eb.c, remote-vx.c, remote-nindy.c, target.c: Change type of the "resume" function from int to void, since its result was never used. Sat Dec 22 02:51:40 1990 John Gilmore (gnu at cygint) * main.c: Replace "stupid" with "caution"; you now "set caution on or off". * printcmd.c (print_scalar_formatted): Fix typo in 'g' format * infcmd.c (do_registers_info): Call val_print to deal with the byte order of the registers being printed. FIXME, this makes the formatting of the output uglier. * infcmd.c (wait_for_inferior): If PRINT_RANDOM_SIGNAL is defined, call it for signals the debugger doesn't itself use. The i960 uses this for more detailed fault information. * remote.c (remote_open): If arg is null, print help rather than dumping core. * sparc-xdep.c (register_valid): Avoid declaring size, since various modules will think of various sizes depending on the architecture of their tm-file. FIXME, we need protection against actually entering one of those modules, which would clobber storage if not for the target architecture compiled into gdb. * stack.c (up_command, down_command): Always print the frame you arrive at. (up_silently_command, down_silently_command): New commands for use in scripts. * i960-pinsn.c (reg), i960-tdep.c: Lint. * i960-tdep.c (i960_frame_chain_valid): Lookup_symbol now takes more parameters than it used to. * findvar.c (registers): Increase slop to 256 bytes, which should protect us against even most RISC machines with large register sets. (locate_var_value): Move declaration inside related ifdef. * remote-nindy.c (): Use TIOCSETN rather than TIOCSETP throughout, to avoid throwing away buffered input from the board. (nindy_wait): Supply_register takes addr_of_value, not value. (i960_print_fault): Renamed from i80960_fault. (nindy_fetch_registers): Avoid have_regs stuff, just get them. (nindy_store_registers): Avoid regs_changed stuff, just stuff them. (nindy_create_inferior): Don't bother to write PC_REGNUM since we can set the PC in the call to proceed(). Unpush nindy_ops before pushing it on top, to avoid message to user. Eliminate commentary from Unix machines that just misleads here. (reset_command): Fix error message to suggest target command. Wed Dec 19 11:03:56 1990 John Gilmore (gnu at cygint) Release 3.92.5 as frozen. Stabilize the merged release...with help from lint, Saber C, gcc -W, etc. Everywhere: Add include files needed to declare return types of functions called. * gdb.texinfo: Roland Pesch is documenting gdb, glory be! * breakpoint.h: Add undeclared breakpoint functions, and some functions for display handling since I couldn't think of a better .h to put them in. * breakpoint.c (insert_breakpoints): Make code for disabling shared library bkpts more likely to work. It's used when we rerun a program and stop before the shared library has been mapped in. (breakpoint_cond_eval, bpstat_stop_status): Pass arg as int, cast from pointer, so it squeezes through catch_errors. (bpstat_stop_status): Fix logic broken some time ago. We now always create a bpstat if the stop address matches a breakpoint, even if we don't stop there -- just like the old code used to do before I got my fingers into it (sigh). (breakpoint_1): Print "ignore count" after "stop only if" condition, since that's how it actually works. (mention): Handle watchpoints as well as breakpoints. (watch_command): use set_raw_breakpoint and mention to do most of the work (and initialize all the fields!). Only pass one arg to parse_c_expression, since that's all it takes. * command.c (not_just_help_class_command): Rename arg to args since we ignore "unused argument" warnings on vars named "args". inflow.c (child_terminal_info): ditto. infptrace.c (kill_inferior): ditto main.c (catch_errors, version_info, quit_command, pwd_command, source_command, dump_me_command, editing_info, set_history_size_command, set_history, show_history, set_verbose): ditto stack.c (locals_info): ditto target.c (target_files_info): ditto valprint.c (set_input_radix, set_output_radix): ditto * core.c: Remove old variables for handling core and exec file sections (data_start, data_end, stack_start, stack_end, reg_stack_start, reg_stack_end, reg_stack_offset, text_start, text_end, exec_data_start, exec_data_end, text_offset, exec_data_offset, data_offset, stack_offset). They're superseded the more general build_section_table and xfer_memory. (get_exec_file): Mention the `file' command. (read_memory_check): Rename to memory_error, and only call it in the case of an actual error. (read_memory, write_memory): call memory_error. (core_fetch_registers): Register section name is ".reg". coredep.c: Remove a bunch of crud now that all this file does is pull the registers out of a core file. (fetch_core_registers): Rewrite to actually work, I hope. dbxread.c: Use a.out.gnu.h, not system a.out, now. Replace index() with strchr(). Remove all the pre-BFD macro definitions for accessing the symbol file. (struct dbx_symfile_info): Encapsulate the information that dbx_symfile_init needs to pass to dbx_symfile_read in this struct. (dbx_new_init, dbx_symfile_init, dbx_symfile_read, dbx_symfile_discard): Rearrange symbol file reading to divide the format-specific part from the format-independent part, leaving the format-independent part such as file name expansion and opening in symtab.c. This replaces partial_symbol_file_open and partial_symbol_file_read. Symbol_file_read, add_file, add_file_target_command, add_file_addr_command move to symtab.c. Pass an explicit "mainline" flag for when reading the main symbol table, rather than relying on the offset address to be zero or nonzero. (dbx_symfile_read): Don't allow void *'s to be printed as typedefs. (SWAP_SYMBOL): Use bfd routines to byte-swap the symbols. (ADD_PSYMBOL_TO_LIST): Make the "function call rather than macro" debug version really work. (read_dbx_symtab): Remove unref'd parameter inclink. Avoid swapping N_SLINE symbols, for speed. Merge N_TEXT!N_EXT case with the other external symbol definitions' case. Add comments. (start_psymtab): Allocate the symfile name in the psymtab on the psymbol_obstack, rather than using the caller's storage. (end_psymtab): Only allocate a dependencies list if there are more than zero. (psymtab_to_symtab_2): Use BFD when reopening file to read its symbols for real. (read_struct_type): Add FIXME comments where it needs work for C++ bogosity. (read_huge_number): Add FIXME about overflows. (read_range_type): Add FIXME about comparing a long to 1<<32. * coffread.c: Minor changes to move things closer to the new regime with symtab.c and dbxread.c Major work is still needed here. * exec.c (exec_file_command): Remove old variables (see core.c above). (xfer_memory): If memory transfer is right at the end of a section, don't lose. * findvar.c (get_saved_register): If value is in a real register, LVAL is lval_register, not lval_memory. frame.h: Declare print_sel_frame and record_selected_frame. gdb-int.texinfo: New file, for GDB internals documentation. Very simple, unformatted doc of cleanups is there for now. gdbcore.h: Remove obsolete variables that described a.out section addresses and offsets. (See core.c above.) Declare fetch_core_registers and registers_fetched. getopt.c: Declare char *alloca(); even on SPARC. infcmd.c (run_command): Call target_kill rather than kill_inferior. (step_command, next_command, stepi_command, nexti_command): Declare from_tty parameter even though we don't use it. (run_stack_dummy): argument BUFFER is a char array, not a pointer to REGISTER_TYPE. (finish_command): using_struct_return needed a value *, not a struct symbol *. * infptrace.c (child_xfer_memory): To avoid dependency on where sections are in memory, try PT_WRITE_D and if that fails, try PT_WRITE_I. Most Unixes don't care which you use. * infrun.c (step_resume_break_shadow): Change to array to match other breakpoint shadow storage. (clear_proceed_status): Pass address of bpstat to bpstat_clear, not the bpstat itself. (child_create_inferior): FIXME comment about if the child exits. (start_inferior): Remove old function. (child_open): Use target_kill rather than kill_inferior. (wait_for_inferior): Ditto. (insert_step_breakpoint, remote_step_breakpoint): Use new step_resume_break_shadow. * inftarg.c (child_wait): If all child processes die, pretend that the one being waited for exited with signal 42. * main.c (command_line_input): When scanning for comments, don't coredump on unclosed quotes. (quit_command): Use target_kill rther than kill_inferior. (_initialize_main): Rename class_user from "user" to "user-defined". * printcmd.c (print_command_1): Initialize "fmt" if no format is specified by the user. (print_frame_args): Only add to args_printed if we are actually fetching args from the stack (avoiding undefined arg_size). (_initialize_printcmd): Remove bogus \{ from string. * remote-eb.c (eb_open): Avoid coredump on no argument. * remote-nindy.c: Bring out of Intel environment into new target environment. Remove all conditional compilation on I80960. Massive hacking throughout. (nindy_xfer_inferior_memory): New routine stolen from infptrace.c. (nindy_create_inferior): New routine pieced together, probably not quite working yet. (nindy_ops): New target_ops struct for nindy. * remote-vx.c: Use write_memory rather than target_write_memory to get error checking. (vx_add_file_command, vx_open): Use symbol_file_add rather than add_file. (vx_create_inferior): Use target_terminal_ours... * signame.c (_initialize_signame): Always initialize, since we need the table for things other than psignal. * solib.c (solib_add): Use symbol_file_add, not add_file. (solib_address): Return boolean result rather than struct pointer which nobody else knows the type of. * sparc-tdep.c, valops.c: Use write_memory rather than target_write_memory, to get error checking. * stack.c (locals_info, catch_info, args_info, get_selected_block, frame_command, up_command): Use target_has_stack, rather than have_inferior_p or have_core_file_p. * sun3-xdep.c (fetch_core_registers): Rewrite for new BFD regime. * symfile.h: New file, defining the interface between the generic and object-file-specific symbol reading code. * symtab.c: Move generic symbol-reading interface to symtab.c, from dbxread.c, coffread.c, mipsread.c, etc. Add symtab_fns table to map BFD targets to symbol-reading modules in GDB. Change index to strchr. (lookup_struct_elt_type): Use error() rather than hand-made simulations thereof. (lookup_partial_symbol): Speedup slightly when length == 0. (symbol_file_add): New function. (symbol_file_command): Call it. (symfile_open, symfile_init): New function. (add_file_target_command, add_file_addr_command): moved from dbxread.c. * target.c (target_command): use target_kill. * target.h (target_files_info): Don't declare, never called from outside. * tm-sun2.h, tm-sun3.h (STACK_END_ADDR): Use system include files to determine stack end address. * valarith.c (value_x_binop, value_x_unop): Change error message to be more useful. Pass proper argument to value_struct_elt. * valops.c (value_assign): FIXME comment that long long bitfields will break here. * Makefile.dist: Add symfile.h, remote-nindy.c, remote-eb.c. Update `make saber_gdb' to work better. * TODO: A woman's work is never done. * cplus-dem.c, environ.c, inferior.h, infrun.c, inftarg.c, main.c, obstack.c, printcmd.c, remote-eb.c, remote-nindy.c, remote-vx.c, remote.c, solib.c, source.c, sparc-pinsn.c, sparc-tdep.c, sparc-xdep.c, symmisc.c, symtab.c, symtab.h target.c, terminal.h, tm-sparc.h, tm-sunos.h, utils.c, valops.c, valprint.c, exec.c: Lint. Wed Dec 12 23:44:15 1990 John Gilmore (gnu at cygnus.com) Continuing Intel 960 port merge of GDB. * Makefile.dist: Merge i960 "nindy-share" files. Rename malloc.h to gmalloc.h to avoid name conflicts in /usr/include. Don't ship gdb.dvi in tar file. Link gdb with init.o, not init.c. Wack over "make depend" so it handles files in subdirectories vx-share, nindy-share, bfd, and in the current directory. * blockframe.c (get_prev_frame_info): Remove fatal error if stack not defined. * core.c (core_open, core_detach): New functions that handle the old "core-file" command as "target core" and "detach" instead. (core_file_command): Call them. (core_xfer_memory): Use common routine xfer_memory. * dbxread.c: Include a.out.gnu.h, not system a.out.h. dbxread now uses bfd for everything but symbol reading itself. BFD internals are used to drag out the relevant file offsets. (partial_symbol_file_open): Change args all around for BFD. * symtab.c: Rename "value" to "val" everywhere, so we can #include "value.h". (symbol_file_command): New command, moved from dbxread.c and coffread.c. It uses BFD to read the file, then vectors based on its type, to dbx or coff symbol readers. * symtab.h: Extern a few vars for symbol_file_command. * target.h: Breakpoint takes a char * save area, not a char **. * valprint.c (val_print): When unpacking bitfields, offset the address in gdb of the value, if it is declared with a shorter type. Remove the last "runtime kludge test" of host byte order. * utils.c: Remove old my_bfd_read routine. * stack.c (frame_info): Use target_has_stack. Print program counter register's actual name rather than "pc", since it's called the "ip" (instruction pointer) on the i960 (sigh). * target.c (target_command): Add command for selecting a target type and calling its open routine. This is used for initiating communication with a particular target, in a generic way. * tm-i960.h: Update for modern gdb. Remove semicolons from various macros. Handle reading struct return convention, and error-out attempts to return structs with the "return" command. Be sure gdb doesn't think we know how to call functions in the inferior. * i960-tdep.c: Rename FRAME_CHAIN_VALID and FRAME_FIND_SAVED_REGS to i960_xxx in lower case. (arg_address): Circumvent errors due to LOC_ARG_BLOCK not being defined yet. * remote.c (remote_open): Call start_remote to initialize wait_for_inferior during open. (remote_xfer_inferior_memory): Return length written rather than errno value. * remote-vx.c (target_command -> vx_open): Use new generic target command. * remote-eb.c, inftarg.c, exec.c: ditto. * infrun.c: Fix comments. (attach_program -> child_open): Use new generic target command. (wait_for_inferior): Clear saved register values before target_wait, so target_wait can set some of them if convenient. * infptrace.c (fetch_inferior_registers, store_inferior_registers): Return success indicator, not void. (child_xfer_memory): Avoid fetching initial word if we'll overwrite it anyway. * infcmd.c (attach_command): Use new generic target open routine. (_initialize_infcmd): Update doc on attach and detach commands. (do_registers_info): Merge in a byte-order problem as a FIXME comment. * findvar.c (find_saved_register): Avoid problem in current frame. (read_relative_register): Ditto. (write_register): Convert byte order on the way out. * exec.c (file_command): Add. (add_to_section_table, exec_command): Use new bfd_map_over_sections. (xfer_memory): Common function between core_xfer_memory and exec_xfer_memory. (exec_xfer_memory): Use it. * pn-opcode.h: Document that a "PN" is a Gould PowerNode. * breakpoint.c, breakpoint.h, symtab.h, value.h, frame.h, utils.c, valops.c, stack.c, target.c, sparc-xdep.c, source.c, printcmd.c, infcmd.c, i960-pinsn.c, eval.c, defs.h: lint and gcc -Wall. Sun Dec 2 16:45:06 1990 John Gilmore (gnu at cygnus.com) Merge Intel 960 port of gdb, continuing... * dbxread.c (partial_symbol_file_open, partial_symbol_file_read, symbol_file_command): Pass from_tty arg to hush 'em up. * coffread.c (symbol_file_command): Avoid output if from_tty != 1. Add magic numbers for 960 COFF format. Fri Nov 30 09:18:20 1990 John Gilmore (gnu at cygnus.com) Merge Intel 960 port of gdb, from Intel "1.2" release. CHANGE_LOG entries from their port, which was based on gdb+-2.8.0: Thu Sep 6 11:02:22 PDT 1990 Remove temp file if download is interrupted. Wed Aug 1 09:08:33 PDT 1990 Now uses binary protocol to talk to NINDY. Old hex protocol (NINDY 2.13 and older) supported with -O switch. Times out after 5 seconds when trying to talk to NINDY. Tue May 29 12:54:49 PDT 1990 Added variable baud rate (-b switch). Source code reorganization. Thu Apr 26 11:09:55 PDT 1990 More cleanup of batch mode; specifically, execute "-s", "-e", and "-se" switches as soon as they are encountered on the invocation line. Fri Apr 20 13:47:15 PDT 1990 Add -brk switch. Thu Apr 19 09:54:28 PDT 1990 Add 'reset' command. Wed Apr 18 09:48:07 PDT 1990 After opening remote tty, wait for 1 second to go by without input from it before trying to talk to NINDY (fixes problems with the Heurikon HK80/V960E). Mon Apr 4 16:33:05 PDT 1990 Some output was not being suppressed in 'batch' mode. Thu Mar 22 15:31:11 PST 1990 Ask user if old symbol table should be deleted when new file is downloaded. Allow user to run a program downloaded before gdb960 was brought up. Correct "exec-file" help message for i80960 context. Correct bug in calculating user space address: could occasionally corrupt user program. Make sure to zero low-order bits in rip's because of bug in 960CA A-step part: could cause operation faults when "next"ing across a function call. Correct bug that made it impossible to get source line numbers for code loaded at addresses higher than 0x7fffffff. Wed Jan 10 12:43:22 PST 1990 Open remote tty for exclusive use. Fri Jan 5 12:14:42 PST 1990 Correct disassembly (CA manual was right after all): opcode for sysctl is 0x659 Mon Oct 23 12:03:04 PDT 1989 Use G960BASE and G960BIN environment variables to find 'sx' utility. Mon Oct 16 14:15:09 PDT 1989 "sfr0"-"sfr31" should have been named "sf0"-"sf31" Mon Oct 2 15:56:31 PDT 1989 Added 960CA disassembly support. To simplify maintenance: - eliminated use of symblic links on pinsn.c: use i960-pinsn.c directly instead. - eliminated opcode.h: incorporates tables into i960-pinsn.c - moved 960-specific routines from i960-pinsn.c to i960-md.c - made disassembly interface identical to that in gdmp960. Wed Nov 28 21:32:48 1990 John Gilmore (gnu at cygint) * target.h: Allow targets to stack. Add target_has_memory, _registers, etc. Restructure memory access and "info files" to walk the target stack. * exec.c, core.c, inftarg.c, remote.c, remote-vx.c, remote-eb.c, target.c: Change tables to match target.h. * inflow.c (child_mourn_inferior): pop child_ops. (generic_mourn_inferior): Use new has_stack flag. * infptrace.c (child_xfer_memory): New memory regime. * inftarg.c (child_files_info): New "info files" regime. * remote-eb.c: New memory regime, new info files. * remote-vx.c: New memory regime, new info files. Now use separate targets for VxWorks attachment to machine, and actually running a process under VxWorks, since one has stack & execution & regs and the other doesn't. * remote.c: New memory regime, new info files. * sparc-xdep.c (fetch_core-registers): New memory regime. * target.c: New routines and support for stacked targets, new memory regime, new info files regime. Generalize section handling for an arbitrary number of sections, including use of the new BFD (binary file) library. * gdbcore.h: Add struct section_table. * exec.c (build_section_table): Iterate all sections and record what gdb needs to know about them. (exec_command): Use it. (exec_xfer_memory): Use the table. (exec_files_info): Print the table. * core.c (core_file_command, core_xfer_memory, core_files_info): Likewise. * source.c (find_source_lines): Use bfd_get_mtime. * dbxread.c: Quick changes to make it compile with new BFD. * utils.c (error): Avoid using bfd_error in generic routines. * core.c (core_fetch_registers): Get from the ".regs" section of the BFD core file. * sparc-xdep.c (fetch_core_registers): Use the .regs info. * inferior.h (attach_flag): Export. * infcmd.c (run_command): use new target_create_inferior. * infrun.c (child_create_inferior): Don't return result. * Makefile.dist (VERSION): 3.91.4. Fri Nov 23 28:15:38 1990 John Gilmore (gnu at cygint) * breakpoint.c (bpstat_num): Handle breakpoints which have since been deleted, such as temporary breakpoints. infcmd.c (program_info): ditto. * core.c (core_file_command): Display the frame where the core dump occurred. * main.c: lint. * remote-vx.c (target_command): Merge in target command from targ-vx.c. A few other cleanups. * TODO, Projects: Lots more stuff to do... Fri Nov 23 18:15:38 1990 John Gilmore (gnu at cygint) Massive changes to wall off the remote-debugging interface behind a function vector. The port to handle VxWorks targets is also part of this. All files: Replace references to renamed functions, remove references to remote_debugging, remove references to have_include_file, have_core_file in favor of target_has_stack, target_has_memory, etc. * Modularize the breakpoint interface. breakpoint.h (BREAKPOINT_MAX): New define sets max length of a breakpoint instruction. breakpoint.c: struct breakpoint's shadow_contents now sized as BREAKPOINT_MAX. (insert_breakpoints): Vector to target to install breakpoints. (remove_breakpoints): Vector to target here too. Remove REMOTE_SA_SPARC kludges and other remote_debugging. sparc-tdep.c (single_step): Use new breakpoint interface for the single-step breakpoints. mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint): New file, contains routines to insert and remove breakpoints by reading out the old contents and later replacing them. This is how ptrace breakpoints work, and many remote systems as well. * tm-vxworks68.h: New config file, overrides a few things for Wind River's preferences. * target.h: New file, for transfer vector used to talk to the inferior (child, attached, core, exec, remote, etc). All accesses to the thing being debugged should come through these vectors. target.c: New file, routines to handle transfer vector. (various files): Add transfer vectors XXX_ops for the various targets and pseudo-targets (core files, etc) we support. * breakpoint.c (bpstat_stop_status): Further explorations of watchpoints and why things don't work all the time. (bpstat_alloc): New fn to allocate a bpstat and chain it. * config.gdb: Only add "source ${srcdir}/.gdbinit" to the local gdbinit if it doesn't already have it. * core.c (core_ops): add and install. Allow core debugging without exec file. * dbxread.c (free_and_init_header_files): Merge two fns. (end_symtab): Free named symbol table when a new version comes in. (read_dbx_symtab): Relocate all kinds of symbols with base address. First step toward handling different text, data, bss reloc. (add_file_addr_command): Renamed add_file_command. (add_file_command): Vector to remote handler. Add "load" as an alias for "add-file" command. * defs.h: Allow "volatile" to be used in non-ANSI; use it for non-returning functions. * exec.c: Add exec_ops, and push it as a target when an exec file is specified. * infcmd.c (run_command): Pass executable file name and arg list separately when starting an inferior. Permit "run" when no exec file is specified, for VxWorks. (detach_command): Move to child_detach in inftarg.c. * inftarg.c: New file. Unix-child-specific routines, and the child_ops structure. * inferior.h (registers): Export "registers" as the way for target dependent register handlers to find gdb's local copy of the registers. Rename "stop_after_attach" to "stop_soon_quietly" since it is now used by places that want wait_for_inferior to handle the grunge but want to see every trap from the inferior. * inflow.c (create_inferior): Pull out, and merge into infrun.c. Eliminate remote_debugging hooks in terminal handling. * infrun.c: Replace start_inferior with child_create_inferior. Move all the hair of Unix shells and ptrace idiosyncracies into child_create_inferior, so remote handlers don't have to deal. Remove running_in_shell. Rename stop_after_attach to stop_soon_quietly, and use it in a few other places where we want to just call wait_for_inferior and get control back on the first trap. trap_expected now never takes a value > 1. (init_wait_for_inferior): Initialize static vars when a new process is created. main.c (gdbinit): Add new hook for .gdbinit file name, let it be overridden by config files as GDBINIT_FILENAME. (DEFAULT_PROMPT): Add new hook for overriding (gdb) prompt. Both of these are used for VxWorks gdb. mcheck.c: rename include file "gmalloc.c" to avoid problems with system include file "malloc.c". param-no-tm.h: New include file, same as param.h but does not include the default "tm.h" file. This is used in files where the target is known, e.g. remote-eb.c or sparc-xdep.c. param.h: Now just a shell that includes tm.h and param-no-tm.h. remote-vx.c: New file, VxWorks remote debugging support. Uses RPC routines that are shared with the target system, in directory ${srcdir}/vx-share. remote.c: Vectorize remote interface. source.c: Globalize source_path, and make an alias "l" for "list" since we now have the "load" command. sparc-xdep.c: Use new param-no-tm.h. symmisc.c (free_named_symtab): Add new function from Wind River. However, ifdef it out for now while we think about what it should really be doing. tm-sun3.h, xm-sparc.h, xm-sun3.h, xm-symmetry.h: Move PREPARE_TO_STORE to the xm- file, and change its name to CHILD_PREPARE_TO_STORE, since non-Unix-children handle this with their own code in the target transfer vector. Makefile.dist: Roll version to 3.92.3. Add vx-share stuff to source and target lists. Add vx-share to default list of include directories. Add new files to src and target lists: mem-break, target, inftarg, remote-eb, remote-vx, targ-vx. Be sure the ${srcdir} versions of munch and createtags are used. * valops.c (find_function_addr): Split out of call_function. (call_function_by_hand): Rename call_function; this function calls functions in the target by laboriously patching the target word-by-word with the right stack, args, regs, etc. Mon Nov 5 17:29:10 1990 John Gilmore (gnu at cygint) Handle AMD 29000 a bit better. * remote-eb.c (readchar): Mask received char log to make it readable. (remote_start): Pass arguments down to executing program. Make startaddr unsigned. infrun.c (start_inferior): Accept args, pass them to remote_start. infcmd.c (run_command): Pass args down to start_inferior. * tconfig/am29k-aout, tconfig/am29k-coff: New files specifying the target object file format. tm-29k.h: Pay heed to COFF_ENCAPSULATE. * am29k-pinsn.c (print_insn): Print 0x on hex numbers in disassembly. am29k-tdep.c (examine_prologue): Better checking of function prefixes. Sun Oct 7 18:20:45 1990 John Gilmore (gnu at cygint) * Makefile.dist (VERSION): Roll version to 3.91.9 and freeze. * TODO: We did a few things, we have more to do though. * xm-sparc.h (CLEAR_DEFERRED_STORES): Define. * inflow.c (inferior_died): Clear deferred stores. * Debug problems with dummy frames and calls to the inferior. * tm-sparc.h (PUSH_DUMMY_FRAME, POP_FRAME): Move to sparc-tdep.c. * sparc-tdep.c (do_restore_insn): Simplify. (sparc_frame_find_saved_regs): Simplify and fix what we find. (sparc_push_dummy_frame): Simplify and fix what we push. (sparc_pop_frame): Slightly more hair here, deciding whether we are restoring a saved PC or returning to a return address in %i7. * sparc-xdep.c (read_inferior_registers): Debug if valid reg is read. * utils.c (xmalloc, xrealloc): Return type depends on __STDC__. * symtab.h (xmalloc): ditto, for obstack_chunk_alloc. * obstack.h (chunkfun): ditto. * defs.h (xmalloc, xrealloc): ditto * utils.c (quit): Grab the terminal from the child if necessary. * inflow.c (term_status_command): Rename to term_info, change to "info terminal". * sparc-pinsn.c (print_insn): Disassembly prefers real instructions. (is_delayed_branch): Speed up. * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables. Still missing some float ops, and needs testing. * Support for input and output radixes other than base 10 * defs.h (input_radix, output_radix): Declare. * expread.y (yyparse, parse_number): Handle changes of input radix, and ambiguous names-or-numbers in radixes >10. * printcmd.c (print_scalar_formatted): Print formatted hex numbers in varying column widths. * valprint.c (val_print): Use output_format to print scalar ints. (set_input_radix, set_output_radix, set_radix): Create. (set_output_radix): Set output_format from output_radix. (_initialize_valprint): add `set radix' but leave the others off. * main.c (execute_command): Let stupid questions be turned off. (_initialize_main): Handle "set stupidity", etc. * main.c, inflow.c, inferior.h, frame.h, command.c, defs.h, sparc-pinsn.c, sparc-xdep.c, value.h, valops.c, values.c: Lint. Tue Oct 2 11:20:02 1990 John Gilmore (gnu at cygint) * TODO, Makefile.dist, ChangeLog: Freeze for 3.91.8 release. bfd stuff is still screwed up, but with some manual work, it compiles. * breakpoint.c (bpstat_do_actions): Start over if a command proceeds the inferior, since the inferior will have stopped and will need to have its new stop-actions taken care of. * dbxread.c (read_struct_type): Expression gives Sun3 4.0.3 compiler fits, simplify it. * gdb.texinfo (directory command): Doc new dir command. source.c (directory_command): "dir" now puts things on the front of the path, moves dups up front, and handles multiple names on the command line, inserting each one in order. It also blows away cached line and full_filename info. * stack.c (backtrace_command): Skip "more stack frames follow" unless interactive. * Change #ifndef HAVE_VPRINTF to #define MISSING_VPRINTF in xm-convex.h, xm-hp300bsd.h, xm-isi.h, xm-merlin.h, xm-news.h, xm-np1.h, xm-pn.h, xm-pyr.h, xm-symmetry.h, xm-umax.h, xm-vax.h. The only odd one was Gould NP1, which had defined vprintf to "printf"!!! * Merge Ted Goldstein 's changes for epoch. printcmd.c (print_command_1): Pass 'inspect' flag down as a global variable, inspect_it. valprint.c (print_string, val_print): Use the global inspect_it to indicate whether to print in Epoch style or normal style. Mon Oct 1 23:55:26 1990 John Gilmore (gnu at cygint) * printcmd.c (call_command): add an alias for the "print" command which runs expressions and doesn't print the result if void. (print_command_1): implement it. * command.c: Remove #if 0'd code. Initialize all the fields in add_cmd (). Rename do_nothing_command to not_just_help_class_command, and make it externally visible. command.h: add user_commands to struct. * main.c (define_command): Don't overload c->function with a char string as well as a function pointer. * eval.c (evaluate_subexp): Reinstall tiemann changes to calling convention of value_struct_elt () that got dropped in merge. * tm-sparc.h (FRAME_FIND_SAVED_REGS): move to sparc-xdep.c. sparc-tdep.c (sparc_frame_find_saved_regs): ditto. * tm-sparc.h (POP_FRAME): replace some constants with defines. * sparc-xdep.c (store_inferior_registers): defer stores to regs until a good time (e.g. when we are about to run the child), saving ptrace calls. * infrun.c (proceed): handle DO_DEFERRED_STORES. * tm-sparc.h: define DO_DEFERRED_STORES. * sparc-xdep.c (store_inferior_registers): when storing float registers, don't store stack regs too. When storing the SP, however, DO store the stack regs too. This fixes a bug in which the dummy frame is not recognized when a call_function finishes, because its frame pointer (in the stack regs) was never initialized. (read_inferior_registers): Mark WIM and TBR and FPS and CPS valid even though we don't know how to read them from an inferior. valops.c (call_function): Comment about storing SP. * infrun.c (save_inferior_status): Save away the original bpstat chain so it can be restored later. Install the copied version for use by whoever saved the status. It will be blow away by restore_inferior_status, and the original chain restored. This is important for people who have pointers into the original. * breakpoint.c, command.h, copying.awk, dbxread.c, defs.h, findvar.c, frame.h, obstack.h, obstack.c, inflow.c, value.h, main.c, printcmd.c, sparc-tdep.c, symtab.c, valprint.c: lint Fri Sep 28 20:32:46 1990 John Gilmore (gnu at cygnus.com) * Makefile.dist: Roll version to 3.91.8. Add bfd.h and bfdconfig.h temporarily to the makefile. Add am29k-opcode.h and WHATS.NEW. Add stuff.c and kdb-start.c to the OTHERS list for tar files. Fri Sep 28 19:12:12 1990 John Gilmore (gnu at cygint) * Merge Mike Tiemann's multiple inheritance changes from Sun. Store the baseclasses in a type struct starting from array element 0 rather than from the unusual array element 1. dbxread.c: the above. (virtual_context): Add Read new debug information about which virtual function table a virtual function is from, and store it in fn_field.fcontext. symtab.h: Add fcontextt. Fix baseclass indices. Typo in TYPE_FN_FIELD_STATIC_P. symtab.c: the above. valops.c: the above. Handle pointer casts of object *'s. (search_struct_method): Add. (value_struct_elt): First arg is now a pointer to a value, and is modified on return. valprint.c: the above. values.c (value_virtual_fn_field): Add type arg. Handle offsetting to the proper object when calling virtual fns. The above. (baseclass_addr): Add valuep arg. * README: Document the current state of BFD config (missing). * TODO, ChangeLog, Makefile.dist: Roll version. * WHATS.NEW: Add summary of changes since 3.5. Thu Sep 27 16:23:12 1990 John Gilmore (gnu at cygint) * dbxread.c (read_struct_type): Clear bit vectors whenever we allocate one. symtab.c (B_CLRALL): define. * tm-sparc.h (STORE_RETURN_VALUE): Avoid clobbering types by using == rather than =. Huh... This fixes the dreaded problem wherein builtin_type_int becomes TYPE_CODE_FLT. * core.c (info_files): Show the inferior pid. * config.gdb: Avoid putting "dir" command into .gdbinit. GDB already knows how to look in the source directory. * Remove psymtab hair from many places. Remove duplicated code for searching symbol tables. Hide psymtabs from most places. Make it fast to get from a psymtab to its symtab. blockframe.c (blockvector_for_pc): Remove psymtab hair. coffread.c (psymtab_to_symtab): Rename to psymtab_to_symtab2. mipsread.c (psymtab_to_symtab): Rename to psymtab_to_symtab2. dbxread.c: export psymtab_to_symtab, make it work if called N times. (psymtab_to_symtab): Rename to psymtab_to_symtab2. Initialize new symtab completely. New psymtabs get symtab pointer initialized to zero. Remove MI warning printf. symtab.h: Comments. Add psymtab to symtab pointer. (PSYMTAB_TO_SYMTAB): New macro. symtab.c: use PSYMTAB_TO_SYMTAB. Add psymtab_to_symtab and export it. source.c: use PSYMTAB_TO_SYMTAB. Remove symtab version and compilation fields. stack.c (backtrace_command): Avoid pre-pass to read symbols, if verbose is not set. (print_frame_info): Avoid special-casing symbols that have not yet been read in. * source.c (open_source_file): Quick path if we have already located the source file by its full name. * symtab.c (lookup_symbol): Use find_pc_symtab rather than find_pc_psymtab. When a name is found in the misc function vector, search the symbol table for its mangled name, not the name that the user typed. * bfd.h: Fix missing comment terminators, make #endifs match. * valarith.c (value_less): Handle unsigned int comparisons. Add FIXME about pointer compares, which assume host and target pointers are the same. * command.c (do_nothing_command): lint dbxread.c: lint. Remove sort_syms. Document C++ visibility info, fix comments on debug symbol format for visibility. Actually set visibility of symbols. main.c (echo_command): lint; use . tm-sparc.h (FRAME_FIND_SAVED_REGS): lint obstack.h (_obstack_blank): Rearrange pointer math to avoid pointing past end of allocated memory; saber complains. obstack.h: Declare the external functions that we use. valarith.h: use solib.c (solib_add): lint. Fri Sep 21 17:05:19 1990 John Gilmore (gnu at cygint) * main.c (initialize_main): Default info_verbose to off, now that symbol reading is fast. (quit_command): Avoid clobbering exec_bfd while quitting. * Initial BFD (binary file diddling library) merger: coffread.c: Change AOUTHDR to struct exe_hdr. dbxread.c: ditto. core.c: initialize initialized data at compile time. (core_file_command): Move from coredep.c, convert to bfd. (xfer_core_file): Convert to bfd. exec.c (exec_file_command): use bfd routines. gdbcore.h: BFD. mips-tdep.c: Remove exec_file_command and friends. source.c: bfd. * coredep.c: (fetch_core_registers) Convert core_file_command to fetch_core_registers. mips-xdep.c, sparc-xdep.c, sun3-xdep.c: ditto. * utils.c: (error): Bogus crap, FIXME, to print bfd errors. (my_bfd_read): More bogosity, which I don't think we call. (program_name): Remove this atrocity asap! Wed Sep 19 13:36:41 1990 John Gilmore (gnu at cygint) * From Per Bothner: values.c: allocate_repeat_value was not clearing the optimized_out field. (value_static_field): minor stylistic fix (wrong macro was used). valops.c (value_struct_elt_for_address): didn't work for C++ static fields. * signame.c (_initialize_signame): Initialize signal names once. * breakpoint.h, command.c, copying.awk, defs.h, environ.c, exec.c, frame.h, infcmd.c, inferior.h, main.c, munch, sun3-xdep.c, symtab.h, tm-29k.h, valprint.c, value.h, values.c: Lint. * remote-eb.c: Support user-settable baud rates on the serial port. * tm-sun3.h (PREPARE_TO_STORE): fix typo. Fri Sep 14 13:28:29 1990 John Gilmore (gnu at cygint) * tconfig/sun3os4: Remove warning about native assembler, since it also occurs in the xconfig file. * findvar.c (registers): Allocate some slop after `registers' to prevent stray accesses from trashing the next variable. * tm-68k.h (REGISTER_BYTES): Allocate the right number of bytes on the sun-3, by changing the #ifdef from `sun3' (which is not defined by cc) to `sun'. Symptom was trashed builtin_type_XXX vars, which happened to follow `registers' in the executable. * readline/history.c (history_search): Heed gcc-2's advice and parenthesize && inside ||). * am29k-opcode.h, am29k-pinsn.c, am29k-tdep.c, remote-eb.c, tm-29k.c: Insert FSF copyright headers. * remote-eb.c: Better comments. * Makefile.dist: Update to 3.91.6. * TODO: note PREPARE_TO_STORE problem. Thu Sep 13 09:52:33 1990 Jim Kingdon (kingdon at cygint) * stack.c (frame_info): Only use FRAME_FIND_SAVED_REGS if defined. * remote.c: Wrap the whole file in #if !defined (SPECIAL_REMOTE). * infrun.c (wait_for_inferior, at end): Don't set up prev_* if the inferior no longer exists. * inferior.h (CALL_DUMMY_LOCATION): New macro, to replace CANNOT_EXECUTE_STACK. valops.c (call_function): Use it. * tm-convex.h: Add CALL_DUMMY_LENGTH for use by PC_IN_CALL_DUMMY. * inferior.h (PC_IN_CALL_DUMMY): New macro. infrun.c (wait_for_inferior, 2 places): Use it. * values.c (value_being_returned): Only use EXTRACT_STRUCT_VALUE_ADDRESS if defined. * Move PREPARE_TO_STORE from xm-sun3.h to tm-sun3.h to do the right thing for remote-eb.c. * sun3-xdep.c: Remove extraneous call to remote_store_registers. * sun386-xdep.c, hp300hpux-xdep.c, sparc-xdep.c: Ditto. * blockframe.c: Put get_frame_saved_regs inside #if !defined (FRAME_FIND_SAVED_REGS). * findvar.c ({fetch,store}_registers): Check for REMOTE_{FETCH_STORE}_REGISTER macro. * findvar.c (get_saved_register): Add argument lval and change meaning of argument addr. findvar.c: Change calls to get_saved_register to reflect new calling convention. valops.c (value_assign): Use get_saved_register instead of find_saved_register. Sun Sep 2 12:40:20 1990 Jim Kingdon (kingdon at cygint.cygnus.com) * coffread.c (read_one_sym): Make temp_aux an AUXENT, not an (uninitialized) pointer to one. Use "&" when passing it to fread. Fri Aug 31 22:57:54 1990 Jim Kingdon (kingdon at cygint.cygnus.com) * coffread.c (getfilename): Use DGUX x_offset and x_name if defined. * coffread.c (symbol_file_command): Put semicolon after "int from_tty". Put safe_to_init_tdesc_context in #if defined (TDESC). Put #ifdef TDESCs in 1st column for non-ANSI cpp's. coffread.c: #include . (read_coff_symtab): Typo: in_source_files -> in_source_file. Add missing ')' in check for "lc%" and friends. Remove extraneous '}'. Declare read_one_sym() at top of file. (read_file_hdr): Put in extra #ifdefs so MC68MAGIC and MC68WRMAGIC can have the same value without causing a duplicate case. Thu Sep 13 15:55:36 1990 John Gilmore (gnu at cygint) * Allow a Makefile to be built without building the tm and xm file links that screw up builds in subdirectories. This is done with `config.gdb none', then you can do things like `make gdb.tar.Z'. * tconfig/none: Config file for no target system * xconfig/none: Config file for no host system * config.gdb: If no TM or XM files are called out by the host or target file, don't make links for them. * cplus-dem.c: Add documentation. * dbxread.c (read_ofile_symtab): Turn a fatal error into a simple error, so the user's gdb doesn't crash due to some object file problem (e.g. somebody is rebuilding the file out from under gdb). * printcmd.c (print_address_symbolic): demangle the symbol. * Makefile.dist (OTHERS): Remove tdesc-lib because it has Motorola copyrights in it. Make "make gdb.tar.Z" work. (alldeps.mak): sort and uniq all results from this; duplicates hose gdb.tar.Z link building. Remove RCS files from tconfig and xconfig. Add config files for sun386. Add a few odd files to OTHERS and HFILES. Mon Sep 10 21:20:24 1990 John Gilmore (gnu at cygint) * Makefile.dist: Pull solib.c to tconfig/sun?os4. Roll version number to 3.91.5. Make lint work in bindir. * README: Document cross-debugging and new file structure. * blockframe.c: Lint. Include "value.h" to declare read_register. (find_pc_partial_function): remove duplicate line. * command.h: Lint. Declare error_no_arg and dont_repeat. * tm-news.h: Remove inadvertently duplicated stuff. * mipsread.c: Remove cache_pc_function stuff, now done cleanly. Clean up usage of misc_function_type. Declare some CORE_ADDRs. * config.gdb: Allow `config.gdb host target' form. Clean up previous change that printed bogus messages when you just said `config.gdb'. * core.c: #include "command.h" for lint. * dbxread.c: lint * eval.c: lint * main.c: Remove some casts of enums. Lint. * source.c: lint * symtab.c: lint * symtab.h: lint * expread.y: lint * valarith.c: lint * printcmd.c (initialize_printcmd): Fix thinko in inspect cmd. * sparc-tdep.c (isannulled): Take instruction as parameter, don't read it from memory. This will allow us to save ptrace calls eventually. Changed caller single_step too. * sparc-xdep.c (fetch_inferior_registers): Avoid reading regs that we aren't going to use, saving many ptrace calls, especially when watchpointing or single stepping. Use some #define's for constants. (store_inferior_registers): Ditto. (core_file_command): Use some #define's for constants. * tm-sparc.h: Add #define's for some register numbers, so we can eliminate the use of random constants in sparc-xdep.c. * stack.c (frame_command, print_frame_info, up_command, down_command) Remove frame_changed, since it causes a bug and doesn't seem to do anything useful. In some places it was used as a flag, in others as a stack level (?). * utils.c: Use MISSING_VPRINTF rather than HAVE_VPRINTF, so the default is to use the portable (vprintf) version rather than the kludge version. * xm-news.h (MISSING_VPRINTF): Add. * valprint.c (val_print): Demangle fancy vtbl printouts. Lint. Sat Sep 8 00:24:12 1990 John Gilmore (gnu at cygint) * Remove stuff that forces -Bstatic linking of gdb, and warnings about linking debugged programs -Bstatic in the sun?os4 config files in tconfig and xconfig subdirectories. * main.c (main): Remove unreached exit(0) now that we exit via quit_command(). * Create TODO file for online bug list. There are too many "little" bugs to keep track of on paper. * Change Projects file to refer to bug-gdb@cygnus.com rather than kingdon@ai. Fri Sep 7 23:35:15 1990 John Gilmore (gnu at cygint) * Makefile.dist (VERSION): 3.91.4 now. * symtab.c (init_misc_bunches): Rename from init_misc_functions. (condense_misc_bunches): Add sanity check that misc_count is the same as the number of symbols in the bunch. * coffread.c: rename init_misc_bunches. Pass an argument to condense_misc_bunches (a zero). * dbxread.c (partial_symbol_file_read): Call init_misc_bunches every time we are called; don't rely on our caller to do it. (add_file): Remove call to init_misc_bunches. * mipsread.c: Only warn, don't error, if unknown symbol types. This keeps an old gdb from falling on its face if it sees newly extended symbol info. Rename init_misc_bunches. Fri Sep 7 22:58:15 1990 John Gilmore (gnu at cygint) * Merge in changes from Per Bothner for DECstations and other MIPS stuff. The rest is Bothner speaking: The next message is a merger of Alessando Forin's mips port with mine. I've tried to use my good if biased judgment to get the best of both. It *does* need testing. Some of the changes are general, *not* mips-specific. param.h: Didn't believe in little-endian bit order. There are still inconsistencies about whether flags like BITS_BIG_ENDIAN are integer (#if ...) or boolean (#ifdef ...). I tried to paper over them. dbxread.c,coffread.c,mipsread.c,symtab.c,symtab.h: Moved some misc_function code that was common to {dbx,coff,mips}read.c to symtab.c. In the process, I think I cleaned things up a bit. At the same time, moved obsavestring and obconcat to symtab.c. dbxread.c: Removed obsolete condense_addl_misc_bunches (use condense_misc_bunches(1) instead). exec.c: Needed to include , at least on DECstations. valops.c, mips-tdep.c, tm-mips.h: Added PUSH_ARGUMENTS macro to support funny argument-pushing conventions (when STACK_ALIGN is insufficient). Needed on mips, where doubles need 8-byte alignment, but ints only need 4. mips-opcode.h: Removed cruft that was not being used. Merged in many fixes (most from Frank Yellin, fy@lucid.com). mips-pinsn.c: Print $ before register-names (I think that makes things a little more consistent). Never print two instructions, even if one delays. Removed hex-disassemble set_cmd. (This is not mips-specific, so I think the argument is whether it is generally worthwhile or not. I'm inclined to think not, given how easy it is to convert between radixes in gdb.) mipsread.c: This is basically Alessando's code. It doesn't use obstacks; I changed it to use obstacks in a few minor places where using malloc causes a memory leak. (Probably, more places could/should be changed.) I added record_misc_function where it was missing. In symbol_file_command and add_file_command, I tried to make the code consistent with more recent versions. Minor sylistic changes in parse_procedure. Make a .gdbinfo. psuedo-symbol point back to the real procedure symbol (using the isym field). mips-tdep.c: This is basically from my port, but with a lot of details and a number of routines merged in from Alessando's version. I basically used my code "raw" backtrace (use heuristics from the actual code, rather than symbol table info) - though the idea is Alessandro's. I feel my code is a little cleaner here, particularly in being a little more flexible, such as being able to handle gcc-produced code (which it now can). It also doesn't do frame caching (which is not useful more recent gdb versions). I also used my code for push_/pop_dummy, more or less. I tried to incorporate AF's code for testing sigtramp while backtracing; I probably got it wrong. Added mips_print_register, which tries to scrunch as much information as possible on a screen... Removed the skip-prologue set_cmd. As with hex-disassemble (see under mips-pinsn.c), I don't see anything mips-specific here, and I don't see it being all that useful anyway. tm-mips.h: Added a $fp psuedo-reg distinct from $fp (nice for gcc). Use more register names (rather than hard-cases numbers). Thu Sep 6 18:33:15 1990 John Gilmore (gnu at cygint) * Hack up 3.90.11 changes: * Makefile.dist (depend): parameterize $(GCC). Add solib.c and solib.o. (readline): Fix vpath for both absolute or relative SRCDIR. * blockframe.c: Fix from Schaefer@asc.slb.com for shared libs. Also, let the part I didn't understand at least compile so I can test the rest. FIXME. * dbxread.c: Fix thinko using strcmp. (init_psymbol_list): declare static. (partial_symbol_file_open): Comment cleanups better, avoid cleaning up the string table since the caller will do that. Move the stat for mod time into symbol_file_command, temporarily. (There should be a mod time for each symbol file, eventually, to control its rereading. FIXME.) * infptrace.c (PT_WRITE_D): use same value as PT_WRITE_I for SunOS, which gives error for shared libs otherwise. (From Schaefer, probably FIXME needs work for portability.) * solib.c: Move #include "param.h" to work. Lowercase all the Uppercase Letters In the Messages. (find_solib): Clean up inferior_so_name for debug printouts. Allow no argument, to mean all shared libraries. * symmisc.c: include param.h to get CLEAR_SOLIB. Wed Sep 5 18:00:08 1990 John Gilmore (gnu at cygint) * Merge in Kingdon's changes from FSF: the diffs from 3.90.9 to 3.90.11. ChangeLog entries below are from this. Wed Jun 13 09:17:39 1990 Jim Kingdon (kingdon at mole.ai.mit.edu) * Version 3.90.11. * Makefile.dist (HFILES): Add tm-sunos.h. Tue Jun 12 16:15:26 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * Version 3.90.10. * Makefile.dist (gdb.tar.Z): Change linking of config so it works. Thu Jun 7 16:22:27 EDT 1990 Jay Fenlason (hack@ai.mit.edu) * sparc-opcode.h Added single-operand version of rett. Mon Jun 4 18:12:31 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * m-sparc.h (REG_STRUCT_HAS_ADDR, STRUCT_ARG_SYM_GARBAGE): Put parens around gcc_p in expansion. Thu May 24 15:44:51 1990 Jim Kingdon (kingdon at mole.ai.mit.edu) * utils.c (lines_to_list): Return 10 if lines_per_page == 0. Wed May 23 16:36:04 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * Changes for Sun shared libraries: blockframe.c (find_pc_partial_function): If a non-text symbol is found, set *address = pc - FUNCTION_START_OFFSET. breakpoint.c (insert_breakpoints) [DISABLE_UNSETTABLE_BREAK]: Disable breakpoints instead of giving an error. source.c (select_source_symtab): Initialize cs_pst. symmisc.c: Call CLEAR_SOLIB if defined. symtab.h: Make text{low,high} CORE_ADDR not int. (psymtab): New field addr. solib.c: New file. dbxread.c: Move DECLARE_FILE_HEADERS outside functions. (record_misc_function): Give correct type for N_DATA symbols. (condense_misc_bunches): do "misc_function_count = j" regardless of inclink. Take code which is shared between symbol_file_command and add_file_command and put it into partial_symbol_file_{open,read}. Split add_file_command into add_file_command and add_file. Make psymtab_to_symtab read in the string table if the file is not symfile. Two new parameters to read_dbx_symtab and start_psymtab. tm-sunos.h: New file. Tue May 22 17:43:03 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * infcmd.c: Change cont_command to continue_command and "cont" to "continue". Mon May 21 14:41:41 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * breakpoint.c (enable_breakpoint): Get value of watchpoint. * defs.h [sparc]: Use regardless of __GNUC__. * values.c (USE_STRUCT_CONVENTION): Check for structures of size 1,2,4,8 rather than size < 8. * dbxread.c (dbx_lookup_type): Do f->length *= 2 as many times as necessary, not just once. * sparc-opcode.h: Add a bunch of new opcodes which Sun as supports. Thu May 17 15:04:09 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * {t,x}m-sun386.h, sun386-xdep.c, {x,t}config/sun386 * tm-news.h: Add CALL_DUMMY_*. * tm-68k.h: Remove duplicate comment at FRAME_FIND_SAVED_REGS. * config.gdb: In list_host, list_target, use ${i}, not $i. Tue May 15 21:27:12 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * source.c (find_source_lines) [BROKEN_LARGE_ALLOCA]: Use xmalloc. * sparc-opcode.h: Change all store floating-point state register instructions to have the right match & lose fields. Sat May 5 12:39:18 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * Makefile.dist: Move -I${srcdir} to GLOBAL_CFLAGS and pass VPATH to readline. config.gdb: If srcdir != ., create readline directory and copy a makefile into it. * wait.h, infrun.c: Change WRETCODE to WEXITSTATUS for consistency with POSIX. * breakpoint.c (bpstat_stop_status): Disable watchpoint when we exit its exp_valid_block. Tue Sep 4 11:46:46 1990 John Gilmore (gnu at cygint) * Makefile.dist: Bump version to 3.91.3. * Clean up handling of breakpoint commands (somewhat). Prompted by Tiemann bug report "cont 10" doesn't work any more. inferior.h: Add breakpoint_proceeded to inferior status struct and globals; save it and restore it. (clear_breakpoint_commands): Cleanup, remove old #define. infrun.c (clear_proceed_status): Set breakpoint_proceeded. (save_inferior_status, restore_inferior_status): handle it also. (proceed): Remove earlier code that set breakpoint_proceeded. It is now set only in clear_proceed_status. (clear_proceed_status): Cleanup, use bpstat_clear rather than clear_breakpoint_commands. No callers need the stop_bpstat between clear_proceed_status and proceed. infcmd.c: Add breakpoint_proceeded definition and comment. (cont_command, jump_command, signal_command): Move call to clear_proceed_status right next to call to proceed. breakpoint.c (bpstat_do_actions): Avoid clobbering our caller's argument while running down the chain of breakpoints. Use new variable "breakpoint_proceeded" to determine when a command that it executes moves the inferior past the breakpoint. (bpstat_clear): Handle NULL argument. (bpstat_clear_actions): Avoid useless call to breakpoint_auto_delete. (delete_breakpoint): Clean up bpstat's that are pointing to the deleted breakpoint from the stop_bpstat chain. (breakpoint_auto_delete): Simplify. * Clean up handling of EOF, error on stdin, etc. This was prompted by a network problem that caused gdb to go into an infinite loop filling up its malloc'd memory. main.c (return_to_top_level): Cleanup: call bpstat_clear_actions, not clear_breakpoints_commands, which is now gone. (main): If command_loop returns (e.g. from EOF on stdin), do a quit_command (looping back to command_loop if quit_command doesn't really quit). (command_loop): check result from command_line_input and exit if it returns NULL, rather than passing the NULL to execute_command. (gdb_readline): Free malloc'd result space before returning NULL for EOF. * utils.c (query): Handle C-d to mean "yes", just as if the input was not a terminal. Also avoid infinite loop if EOF occurs in mid-input-line before newline. This allows query to be used at EOF on stdin with reasonable results. * infrun.c (proceed): Set breakpoint_proceeded. * values.c (value_as_long): Avoid infinite recursion for enums. (_initialize_values): Fix typo in help msg (kingdon). * Makefile.dist (RL_LIB): Use RL_LIB_DEP for dependencies, RL_LIB for linking. This allows -lreadline for linking and nothing for dependencies, once readline is a real library. * config.gdb: Jim Kingdon: give useful error message if the host or target type is not recognized. * defs.h (alloca): SPARC does not declare alloca, it just defines it. Dumb, but deal with it. * Jim Kingdon suggests: in xconfig/sun3os4, CFLAGS should be XM_CFLAGS. Wed Aug 29 18:03:27 1990 John Gilmore (gnu at cygint) * Makefile.dist (VERSION): Bump version # to 3.91.2. * Clean up Bothner's changes. * blockframe.c (clear_pc_function_cache): New function. * blockframe.c: remake cache_pc_function_* static. * dbxread.c (symbol_file_command): remove references to cache_pc_function_* variables. * dbxread.c (read_struct_type): Use VOFFSET_STATIC. * printcmd.c: Avoid kludging a global variable (addressprint) to avoid printing the address of a string twice. Instead, pass the format letter 's' down low enough that it can be seen to avoid this problem. (print_formatted): Pass format arg to value_print. (restore_addressprint): Remove function. (do_examine): Avoid hacking addressprint, cleanups and such. (print_frame_args): Add a comment to a Bothner change. * symtab.h: define VOFFSET_STATIC and use it instead of "-1". * symmisc.c (free_all_symtabs): Call clear_pc_function_cache to wipe out the values cached in blockframe.c. * symtab.c (find_method): Add comment saying how big you must allocate to be "big enough". Per being terse again. * valprint.c (val_print): Handle format letter "s" to print strings without addresses. Add comment to vtbl printing code which casts with wild abandon. Rearrange reference-printing code so it prints: @0xaddr: value (print w/addressprint) value (print w/~addressprint) @0xaddr (parameter lists w/addressprint) or nothing (parameter lists w/o addressprint) Tue Aug 28 10:47:18 1990 John Gilmore (gnu at cygint) * Merge more changes from Per Bothner: Gdb's handling of TYPE_CODE_REF was so counter-C++ (and otherwise annoying) that I tried to improve it. Here are my suggestions. These patches all attempt to handle TYPE_CODE_REF (as in C++) better. findvar.c: Do automatic de-reference when taking the address of a reference. printcmd.c: Don't deref_ref when printing parameter lists. valops.c: More attempts at treating refernences properly. valprint.c: In val_print, if deref_ref==0, don't print dangling " = ". value.h: Add COERCE_REF macro, which de-references an REF. * Merge changes from Per Bothner: * Fixed (Sony news)-specific configuration problems. * Fixed other problems with using vanilla pcc and libc (enum problems; assumption that vsprintf exists). * Some major speed-ups (finc_pc_partial_function now caches a match; parsing avoids duplicate symbol_lookup calls). * Changed handling of baseclasses (no longer use baseclasses field of struct type, use the first n_baseclasses fields instead). * Various minor changes/fixes, most C++-related. blockframe.c: Cache the most previous match from find_pc_partial_function. (Save both low and high ends of matching function's pc range.) This speeds up the loop of infrun.c:wait_for_inferior quite a bit, and makes step/next commands much zippier. command.c: Added an enum->int cast (otherwise, some compilers barf). dbxread.c: No longer set baseclass offset to 0, since multiple inheritance now mostly works. Added a number of casts, to shut up compiler warnings (after stabs where made enums, not ints). When discarding a symbol table (in symbol_file_command), must clear the cache introduced in blockframe.c. Don't convert $vtbl_ptr_type to vtbl any more. Get rid of TYPE_BASECLASEES and baseclass_vec (see also symtab.h). Mask off sign bit emitted by g++ for virtual table offset. Set voffset to -1 (not 1) for static member functions. expread.y: Changed parsing/lexing of names to avoid doing symbol lookup twice (once when lexing to determine symbol class, once for real). Now only call symbol_lookup once. Fields of 'this' win especially big. printcmd.c: Subpress printing addr twice in the case of 'x/s addr'. symtab.c: lookup_basetype_type is no longer used. Add find_methods as recursive helper function to decode_line_1. This allows multiple inheritance to work. Also, once one or more matches has been found, do not look in base-classes. (Baseclass methods would be overridden, anyway.) symtab.h: Removed baseclasses array in struct type. Instead of using baseclasses[i], use fields[i-1]. Added virtual_field_bits[i] to indicate if the i'th baseclass is virtual. Changed sign convention of voffset (previous was inconsistent). tm-news.h: Some macros (CALL_DUMMY and relatives) were missing. Put them back. utils.c: Used to assume existence of vsprintf. Re-written to not need it if HAVE_VPRINTF is undefined. valops.c: typecmp was too pessimistic. Made it less so. valprint.c: Don't print space after address. If vtable points to a misc symbol (with 0 offset), print it, since that indicates the actual class of the object. Changed ype_print_derivation_info to use new inheritance scheme (without baseclasses vector). values.c: In value_primitive_field, fixed some bugs left over from previous set of fixes. Also, changes needed because TYPE_BASECLASSES were removed. xm-news.h: REGISTER_U_ADDR didn't work for PC. Rewrote to use an array. Tue Aug 21 20:08:54 1990 John Gilmore (gnu at cygint) * source.c: If there is no path set, and the symbols don't indicate what directory a file was compiled in, look in the current directory. But either a path or a known compilation directory will prevent this. * dbxread.c: Three independent bug fixes: * Remove the #if 0 block that breaks some stuff. * SunOS 4.1 fixed the promoted-parameter-wrong-addr bug in Sun C; adapt gdb to either SunOS 4.0.* or 4.1. * MAX_OF_TYPE and MIN_OF_TYPE thinko. By tedg@sun, I think. * symtab.c: Instantiate the class T when looking for methods in it. (Tiemann@sun) * valprint.c: (type_print) Demangle the name being printed. (type_print_base) Handle botched demangling without coredump (tiemann). * values.c: (check_stub_method): Document routine. (tiemann) fix bug for no-arg functions Avoid clobbering beyond end of malloc'd storage. Terminate the argument list properly. Sat Aug 18 01:29:59 1990 Per Bothner (bothner@cs.wisc.edu) * Changes merged by John Gilmore: breakpoint.c: In breakpoint_1, use new print_address_symbolic instead of find_pc_partial_function. (This forces use of assembler-level addresses, and avoids misleading non-mangled source-level names.) cplus-dem.c: Generalize ansi argument such that -1 means skip arglist totally. Removed global variable print_ansi_qualifiers (which made code non-reentrant), in favor of extra explicit arguments to internal routines. printcmd.c: Add new helper function print_address_symbolic. Use find_pc_misc_function instead of find_pc_partial_function (since we want assembler-level symbols here). stack.c: Print unknown function as just "f (...)", not "f (...) (...)". Use new fputs_demangled explicitly. symtab.c: Fixed a typing violation (problem: value.h cannot be imported without renaming many variable in this file). lookup_symbol: If no matching misc_func, look for a C++-mangled name. decode_line_1: Moved forward some never-reached code. Made decode_line_2 skip function prologues correctly. utils.c: fputs_filtered should not demangle by default. Add new fputs_demangled to demangle on demand.. valops.c: Change value_struct_elt to use value_primitive_field (using recursive utility function search_struct_field). This allows foo.bar to work for multiple inheritance (so far only for data fields). Change check_field in the same way (recursive helper function to support multiple inheritance). (Note: there are more of these problems that I haven't fixed. Any code that says TYPE_BASECLASS (t, 1) is probably wrong.) value_of_this: 'this' symbol name is now just "this", note "$this". valprint.c: Don't print static members. Avoid printing "members of " if there are none. Simplified type_print_derivation_info by merging duplicate code. Remove useless blank lines in type_print_base (ptype command). value.h: Added declaration of new routine value_primitive_field. values.c: Added value_primitive_field which is generalized version of value_field that can handle multiple inheritance (non-zero offsets etc). Re-implemented value_field to call value_primitive_field. Fri Aug 17 23:33:44 1990 John Gilmore (gnu at cygint) * infcmd.c -- insert else to avoid 'delete env' coredump when you delete the whole environment. Karl Berry reported the bug. * source.c - fix openp to avoid //'s in filenames, which trigger an Emacs bug causing it to not be able to find files when running gdb in a window. * dbxread.c - zap the #if 0 that botches the add-file code. It seems to work a lot better without all the code commented out. Fri Jul 20 16:58:46 1990 John Gilmore (gnu at cygnus.com) * Merge Tiemann's and Ted Goldstein's changes, detailed below, into gdb-3.90.9. Tue Jul 17 19:34:33 1990 Ted Goldstein (tedg at golem) * Makefile - added a ${CFLAGS} to a couple of entries, added remote-sa.sparc.c * added remote.sa-sparc.c, a modification of remote.c which conducts a dialog directly with the SparcStation prom. * breakpoint.c, infrun.c, sparcdep.c added remote_insert_breakpoint(), and remote_remove_breakpoint() to breakpoint.c instead of directly writing breakpoint instructions. * sparcdep.c on remote_debugging,there is no need to remove signle step breakpoint instructions. * main.c added "-epoch" flag and "int epoch_interface" to main.c global variable * printcmd.c - epoch interface sends lisp expressions to open up epoch windows on inspection. * valprint.c - added arrayprint, and addressprint and made adding format controls easier * wait.h added a couple of undef's because we were getting complaints about WSTOPSIG and WTERMSIG begin redefined. Wed Jul 4 05:27:51 1990 Michael Tiemann (tiemann at masham) * symtab.c (decode_line_1): Add support for handling method stubs in the type information. Tue Jul 3 09:39:18 1990 Michael Tiemann (tiemann at masham) * values.c (baseclass_addr): Run loop from INDEX+1 to N_BASECLASSES; otherwise, we can still get into a loop. @@ This should be restructured to use a cleaner search strategy. Sun Jul 1 12:28:51 1990 Michael Tiemann (tiemann at masham) * dbxread.c (define_symbol,read_type): Grok GNU C++'s new abbreviation "Tt" for tags which have the same name as their typedecls. Fri Jun 29 01:03:46 1990 Michael Tiemann (tiemann at masham) * symtab.c (list_symbols): add ability to set breakpoints on all the functions which match a particular regular expression. Tue Jun 26 04:26:29 1990 Michael Tiemann (tiemann at masham) * cplus-dem.c (cplus_demangle): New parameter ANSI says whether we should print ANSI qualifiers (such as `const' and `volatile'). All callers changed to call with ANSI == 1, except from `check_method_stub', which uses old-style syntax. * symseg.h (struct fn_field): Remove unneccessary `args' field. * symtab.h (TYPE_FN_FIELD_ARGS): Redefined. * values.c (check_stub_method): New function. * cplus-dem.c (do_type): Handle "long long" (encoded as 'x'). * dbxread.c (read_type): Handle new GNU C++ method type stubs. * valprint (type_print_base): Ditto. * symtab.c (gdb_mangle_typename): New function. Tue Jun 5 00:18:43 1990 Michael Tiemann (tiemann at gzilla) * breakpoint.c (catch_command): New function. Provides a mechanism to set breakpoints based on catch clauses. (disable_catch): Similar, but disables breakpoints on catch clauses. (delete_catch): Similar, but deleted breakpoints on catch clauses. Sun Jun 3 22:54:08 1990 Michael Tiemann (tiemann at gzilla) * blockframe.c (blockvector_for_pc): New function. * blockframe.c (block_for_pc): Changed to call `blockvector_for_pc' and get the block itself. * stack.c (catch_info): New function. Prints info about exceptions which can be caught in the current frame. * stack.c (print_frame_label_vars): New function. Similar to `print_frame_local_vars'. * stack.c (print_block_frame_labels): Prints out labels that are defined in this frame. These labels are exceptions that can be caught. * dbxread.c: Updated to handle N_CATCH symtab types. Thu May 3 22:10:00 1990 Michael Tiemann (tiemann at teacake) * valprint.c (everywhere): TYPE_NAME (TYPE) no longer comes in the form "struct ..." for GNU C++. Don't flush any part of TYPE_NAME when printing the type. Wed May 2 22:43:04 1990 Michael Tiemann (tiemann at teacake) * valprint.c (val_print): Use `baseclass_addr' to access the baseclasses pointed to via the derived class object at VALADDR. * values.c (baseclass_addr): New function. Casts derived pointers to baseclass pointers taking virtual baseclasses and multiple inheritance into account. Sat May 5 12:39:18 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * Version 3.90.9. Fri May 4 12:12:55 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * breakpoint.c (watch_command, bpstat_stop_status): Deal with exp_valid_block field correctly. * infrun.c (wait_for_inferior): When checking "don't even think about breakpoints" if stop_signal == SIGTRAP && trap_expected, also check step_resume_breakpoint. Insert breakpoints and continue (not step) if step_resume_break_address != NULL, even if another_trap. If trap_expected and we enter sigtramp, then set up a step_resume_break. If trap_expected is set when we hit the step_resume_break, set another_trap. When calling resume and trap_expected says tell resume to step (2 places), also check step_resume_break_address. * infrun.c (wait_for_inferior): Don't set prev_{pc,sp,func_{start,name}} before calling wait (). Do set them after exiting loop. Move their declarations outside functions. (start_inferior): Initialize them. Thu May 3 00:15:11 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * infrun.c (wait_for_inferior, after check for trap_expected > 1): Restore old code which distinguishes between trap_expected and running_in_shell, just make the latter take any non-TRAP signal, not just SEGV. * values.c (allocate_value): Zero VALUE_OPTIMIZED_OUT flag. * Makefile.dist (pinsn.o): Use PINSN_CC to compile. xconfig/3b1 (CC,PINSN_CC): Define. * xconfig/altos, altos-dep.c: Rename altos-dep.c to altos-xdep.c. * Version 3.90.8 * breakpoint.c (bpstat_stop_status), infrun.c (wait_for_inferior) [SHIFT_INST_REGS]: New code. * param.h, tm-88k.h: Define ADDR_BITS_*. infcmd.c (jump_command, read_pc), infrun.c (wait_for_inferior), printcmd.c (do_one_display): Use them. * utils.c: Split #ifdef USG into a USG_UTILS and a QUEUE_MISSING. xm-88k.h: Define USG_UTILS. Wed May 2 00:05:33 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * printcmd.c (printf_command) [__INT_VARARGS_H]: New code. (printf_command): Add from_tty parameter. * valprint.c (value_print): Check VALUE_OPTIMIZED_OUT flag. * value.h: Add optimized_out field and change lazy field to char. Add macro VALUE_OPTIMIZED_OUT. * i386-pinsn.c: Change from Eirik Fuller to write to stream directly instead of stuffing things in buffers (oappend, etc). * breakpoint.c (bpstat_do_actions): If *BSP is set to NULL by execute_command, exit both loops. * Makefile.dist: Don't set TARGET_ARCH. Add .c.o rule. Tue May 1 17:07:23 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * Makefile.dist (RAPP_OBS, rapp), rgdb.c, rserial.c, rudp.c, serial.c, udp.c, xdep.h, remote.h: Added. m68k-xdep.c, coredep.c: Wrap in #if !defined (RDB). * valops.c (value_struct_elt), values.c (value_static_field): Change error messages to remove references to `info methods'. Tue Apr 24 10:25:10 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * More 88k changes: infrun.c (start_inferior): Add START_INFERIOR_HOOK. infcmd.c [SHIFT_INST_REGS]: New code. findvar.c (read_relative_register_raw_bytes): Return a value. infcmd.c (do_registers_info): Check value from read_relative_register_raw_bytes. * command.c (delete_cmd): Free the struct cmd_list_element(s) we are removing. Mon Apr 23 10:42:21 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * More 88k changes: findvar.c (get_saved_register): New function. findvar.c: Rewrite code which called find_saved_register to call get_saved_register instead. Sun Apr 22 14:47:51 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * valprint.c (val_print): Change error message printed when the type has TYPE_FLAG_STUB set. * valprint.c (val_print): Check for TYPE_CODE_UNDEF. * findvar.c (write_register): Set register_valid (regno). * valops.c (call_function): Check for NULL return from block_for_pc. Fri Apr 20 11:31:23 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * findvar.c (write_register): Add PREPARE_TO_STORE. {sun3,sparc,symmetry}-xdep.c (PREPARE_TO_STORE): Add. infptrace.c, {mips,pyr,symmetry,sun3,arm,hp300hpux}-xdep.c (store_inferior_registers): Don't call read_register_bytes. symmetry-xdep.c (store_inferior_registers): #if 0 out code to fetch registers. * values.c (value_as_long): Call COERCE_ARRAY. * tm-sun3.h: Include tm-68k.h not m-68k.h * sparc-tdep.c (single_step): Set next_pc, npc4 within if (!one_stepped), not outside it. * Changes from Data General for 88k: * coffread.c (read_file_hdr): Add *88*MAGIC. * coffread.c (have_symbol_file_p): New function. * coffread.c [COFF_CHECK_X_ZEROES] [TDESC]: New code. * coffread.c (read_one_sym): If there is more than one aux entry, don't give an error message, just ignore the extra ones. * coffread.c (process_coff_symbol): Replace clipper with BELIEVE_PCC_PROMOTION in #ifdef's. * coffread.c: Define L_LNNO32 if not defined. (enter_linenos): Use it. * blockframe.c: Add INIT_FRAME_PC hook and use it in get_prev_frame_info. m-m88k.h: Use INIT_{FRAME_PC,EXTRA_FRAME_INFO} to do tdesc stuff. Use dummy versions of FRAME_CHAIN_*. * Makefile.dist, xconfig/i386*: Rename M_CLIBS to XM_CLIBS and add TM_CLIBS and CDEPS. tdesc/libdc.o: New target. tdesc.{c,h}, tdesc/*, {t,x}config/m88k: New files. Thu Apr 12 15:47:00 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * m68k-opcode.h (bras, bsrs): Use "Bw" not "Bg". Tue Apr 10 20:50:25 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * Version 3.90.7. * xm-mips.h (BYTE_ORDER): If not defined, make it LITTLE_ENDIAN. * mips-xdep.c ({fetch,store}_inferior_registers): Remove variable offset and just use register_addr (regno, 1). (core_file_command): Remove variable reg_offset and just use register_addr (regno, 0). * gdbcore.h [COFF_FORMAT]: #undef a_magic before redefining it. * infrun.c ("if (trap_expected && stop_signal != SIGTRAP)", near end of wait_for_inferior): Always pass 0 as first arg to resume. #if 0 out "SIGSEGV in shell" test right above it (now redundant). * i386-pinsn.c (oappend_address): New function. (oappend): Make it "static void" and declare at top of file. (OP_J, OP_DIR): Use oappend_address. Mon Apr 9 15:22:09 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * mips-xdep.c: Include not "mips/inst.h". * wait.h [HAVE_WAIT_STRUCT]: Put #defines in #if !defined so that it's OK if they are defined in . * findvar.c (fetch_registers): Pass "registers", not "®isters", to remote_fetch_registers. * mips-tdep.c (_initialize_mipsdep): Remove hex_disassembler and re-write skip_prologue to use add_set_cmd. * Makefile.dist (alldeps.mak): Don't put \ after the last filename in each list. Sun Apr 8 01:59:19 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * Version 3.90.6. * Makefile.dist (alldeps.mak): "XM_FILE" -> "XM_FILE=". * valarith.c (value_x_{un,bin}op): use "operator" not "operator " to match dbxread.c change of 16 Mar 90. * valarith.c (value_x_unop): Pass &static_memfuncp, not static_memfuncp. * breakpoint.c: Add watchpoint stuff. breakpoint.h: Add bpstat_should_step. infrun.c (proceed, wait_for_inferior): Use it. breakpoint.h: Add bpstat_print (and rename old bpstat_print to bpstat_should_print). infrun.c (normal_stop): Use it. * value.h: Add value_free. Declare a few functions. Sat Apr 7 21:43:43 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * dbxread.c (read_dbx_symtab): Remove PROFILE_TYPES code and insert comment suggesting easy shell script equivalents. * values.c (unpack_long): Give better error messages for unrecognized sizes of ints and floats. Fri Apr 6 00:32:21 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * dbxread.c, gdbcore.h (IS_OBJECT_FILE): Check for a_drsize nonzero as well as a_trsize. * More places: Use SWAP_TARGET_AND_HOST. * valops.c (destructor_name_p): Only skip "struct " if present. * main.c (gdb_readline): Return NULL on end of file. * sparc-opcode.h: Add jmp 1+2, jmp 1+i, jmp i+1. * Makefile.dist: Make expread.tab.c unambiguously be in srcdir. * main.c: Split source_command into source_command and read_command_file. (main): Accept "-" as arg to +command for stdin. * dbxread.c (psymtab_to_symtab): Don't read string table. (symbol_file_command): Save string table size. * Version 3.90.5 * symtab.c: Remove declaration of lookup_misc_func. * mips-pinsn.c: Add use_hex_p stuff (re-worked from Forin stuff). * mips-opcode.h: Add bdelay field. mips-pinsn.c: Various changes from Forin, I think to make it look like the MIPS assembler format. mips-tdep.c, mips-xdep.c, mipsread.c: Various changes from Forin. * gdbcore.h: Declare register_addr. * gdbcore.h: Include , before trying to redefine N_TXTADDR and friends. various: Don't include both a.out.h and gdbcore.h. * Makefile.dist (HFILES): Add param.h * utils.c (init_malloc): Moved here from mcheck.c and modified to use the standard mcheck.c Makefile.dist: Modify to reflect new mcheck. Thu Apr 5 16:38:28 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * valprint.c (val_print, print_hex_chars): Print integers larger than LONGEST. * valarith.c (value_sub): Give error message if attempt to subtract something of the wrong type from a pointer. * breakpoint.c (bpstat_stop_status): Initialize retval to NULL. * i386-tdep.c (i386_pop_frame): Change addr to adr. Wed Apr 4 05:21:50 1990 Jim Kingdon (kingdon at teenage-mutant) * main.c (command_line_input): return NULL on end of file. (execute_command): If p is NULL, return almost right away. (read_command_lines): Treat end of file like "end". * printcmd.c (print_frame_args): Change it so num is number of ints of args, not number of args. * xm-*.h: Make sure BYTE_ORDER is defined. Also fix various #includes of old names of things. * main.c (command_line_input): Fix comment code of 2 Apr. * values.c (value_from_long, unpack_long): SWAP_TARGET_AND_HOST. various: Replace {BYTES,WORDS}_BIG_ENDIAN with TARGET_BYTE_ORDER. valarith.c various: SWAP_TARGET_AND_HOST. dbxread.c (READ_FILE_HEADERS): SWAP_TARGET_AND_HOST. (SWAP_SYMBOL): New macro. Use it wherever symbuf_idx is incremented. exec.c (exec_file_command): SWAP_TARGET_AND_HOST. * valarith.c (value_subscripted_rvalue): Just bcopy() the appropriate bytes rather than playing strange games with value_from_long. * param.h (SWAP_TARGET_AND_HOST): New macro. * tm-np1.h (V7_REGNUM): Change from 27 to 26. (REGISTER_VIRTUAL_TYPE): Return correct result for vector regs. gould-tdep.c: New file. * Move reading of register before store from findvar.c (write_register) to infptrace.c, *-xdep.c (store_inferior_register). * findvar.c (fetch_registers, store_registers): New functions. write_register{,_bytes}: Use store_registers regardless of have_inferior_p. registers_valid: New variable. (supply_register, read_register, etc.): Use it. (read_register_gen): New variable. various: Use read_register_gen rather than read_register_bytes where appropriate. *-xdep.c (fetch_inferior_registers): Remove remote_debugging check. infrun.c (wait_for_inferior, start_inferior): Call registers_changed not fetch_inferior_registers. *-xdep.c (fetch_inferior_registers): Call registers_fetched if not setting registers via supply_register, and if fetching all registers. infptrace.c, *-xdep.c (fetch_inferior_registers): Add param, # of register to fetch (-1 for all). infptrace.c, hp300hpux-xdep.c (fetch_inferior_registers): Actually fetch only those registers needed. value.h: Declare all the extern register functions from findvar.c. * coffread.c (read_coff_symtab): Test for specific kinds of GCC labels (LI%.*, LPB%.*, etc), not just ??%.*. * coffread.c (record_misc_function): Use mf_text not mf_unknown. * utils.c,defs.h (lines_to_list): New function. source.c (select_source_symtab, list_command, forward_search_command, reverse_search_command), stack.c (print_frame_info): Use it instead of 10. * munch: If MUNCH_NM variable exists, use it. * main.c (initialize_main): Set rl_readline_name. main.c: #include readline.h and #undef savestring. Remove declarations of things declared in readline.h. * main.c (gdb_readline): If instream == 0, read from stdin. * main.c (main): Only call clearerr if ISATTY. Exit loop if feof (instream). * infcmd.c (detach_command): Set inferior_pid to 0 after calling remote_close. * main.c (main): If exec and sym files are the same, and there is an error reading execfile, don't try to read sym file. * infcmd.c (detach_command) [ATTACH_DETACH]: Don't try to detach from inferior when remote debugging. * source.c (reverse_search_command): Change while test from 1 to line > 1. Tue Apr 3 18:14:14 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * Version 3.90.4. * Makefile.dist (gdb.tar.Z): Use -z option to tar rather than creating gdb.tar and calling compress separately. * breakpoint.c (read_memory_nobpt): Do not treat bcopy as if it returned an "errno" value. * various: Make sure gdbcore.h is not included before a.out.h. * Makefile.dist (OPCODES): Add mips-opcode.h. * config.gdb: Print lists of {hosts,targets} after finding srcdir. When parsing +{host,target}=, strip off +{host,target}=, not +{x,t}m=. * Makefile.dist (gdb.tar): Do {t,x}config not just config. Mon Apr 2 02:42:23 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * sparc-opcode.h (inc): Fix incorrect lose field. * valarith.c (value_subscripted_rvalue): Use TARGET_BYTE_ORDER, rather than checking endianness at runtime. * main.c (comand_line_input): Accept comments anywhere, not just at starts of lines. Sat Mar 31 21:59:35 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * symtab.c (check_stub_type): Call lookup_symbol with 5 args. Fri Mar 30 15:23:52 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * frame.h: #include param.h. param.h: Protect against multiple inclusion. * i386-tdep.c (i386_get_frame_setup): Fix comment about what opcode 0x55 is. If 0x81 or 0x83 is followed by something besides 0xec, put codestream back where it was and return 0. [USE_MACHINE_REG_H]: Include not Move include of a.out.h above . (i386_frame_find_saved_regs): Make locals signed. (i386_frame_find_saved_regs, i386_push_dummy_frame, i386_pop_frame): Use REGISTER_BYTES, REGISTER_RAW_SIZE, etc. to deal with floating point registers. Wed Mar 28 18:33:40 1990 Jim Kingdon (kingdon at mole.ai.mit.edu) * Makefile.dist (OTHERS): Add gdb.dvi. (gdb.dvi): New rule. * breakpoint.c (_initialize_breakpoint): Clean up docstrings so as not to mention subcommands (e.g. auto-display). Call add_cmd not add_abbrev_cmd for "disable breakpoint" and put it in class_alias. * breakpoint.c (set_breakpoint_count): New function. (set_breakpoint, break_command_1): Use it. * breakpoint.c (get_number): New function. (*_command, map_breakpoint_numbers): Use it. * infptrace.c (write_inferior_memory): Remove remote_debugging stuff (is handled in core.c). (read_inferior_memory): Remove #if 0'd out remote_debugging code. Tue Mar 27 16:51:27 1990 Jim Kingdon (kingdon at mole.ai.mit.edu) * inferior.h: Include frame.h. * findvar.c (write_register): Replace sun4 #ifdef with check of CANNOT_STORE_REGISTER. xm-sparc.h: Define CANNOT_STORE_REGISTER. * sparc-tdep.c: Remove superfluous declaration of get_breakpoint_commands. * breakpoint.{c,h}: Add bpstat stuff. bpstat_do_action: Re-work do_breakpoint_commands into this. main.c (command_loop): Call bpstat_do_action not do_breakpoint_commands. inferior.h, infrun.c, breakpoint.c, infcmd.c: Rework breakpoint_commands and stop_breakpoint stuff to use bpstat instead. * infcmd.c (program_info): "info reg"->"info registers". * np1-opcode.h: Renamed from npl-opcode.h. gould-pinsn.c: Include np1-opcode.h. Makefile.dist (OPCODES): Change npl-opcode.h to np1-opcode.h * coffread.c (read_enum_type): Stop reading when we hit .eos. Mon Mar 26 15:52:35 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * Version 3.90.3. * breakpoint.c (read_memory_nobpt): New function. gdbcore.h: Declare read_memory_{nobpt,check}. mips-tdep.c: Use read_memory_nobpt not breakpoint_shadow_val. Fri Mar 23 14:26:38 1990 Jim Kingdon (kingdon at mole.ai.mit.edu) * inflow.c (terminal_inferior): Reenable commented out inferior_thisrun_terminal check. (terminal_ours_1): If inferior_thisrun_terminal is nonzero, return immediately. * Makefile.dist: Rewrite DEPFILES, M_FILE, etc. stuff to deal with host & target separation. * config/*: Split into xconfig/* and tconfig/*. *-dep.c: Split into *-xdep.c and *-tdep.c. * main.c (main): Always pass two args to xrealloc. Thu Mar 22 20:29:25 1990 Jim Kingdon (kingdon at mole.ai.mit.edu) * Makefile.dist ({,dist}clean): rm {x,t}m.h not param.h xgdb.o: Remove obsolete dependency (now in depend). * arm-pinsn.c: Include arm-opcode.h not opcode.h. * mips-pinsn.c, mips-opcode.h: New files from Bothner (from release of 24 Jan 90 with mips-opcode.h patch from 1 Feb 90). * utils.c (xmalloc): Return NULL on request for 0 bytes. Wed Mar 21 13:30:08 1990 Jim Kingdon (kingdon at mole.ai.mit.edu) * config.gdb: Re-write machine stuff to deal with host & target. * xm-altos.h: Don't define HAVE_WAIT_STRUCT. * m-*.h: Split into xm-*.h and tm-*.h. * infrun.c (wait_for_inferior): Put #ifdef sony_news code in regardless of machine. * symtab.c (decode_line_1): Add quotes and capitalize error message "no class, struct, or union named". * Makefile.dist (cplus-dem.o): Compile with -Dnounderscore. * stack.c (print_frame_info): Use print_symbol to print function name. * symtab.c (output_source_filename): Don't print a comma if we are skipping a filename already printed. Tue Mar 20 10:48:54 1990 Jim Kingdon (kingdon at mole.ai.mit.edu) * symtab.c (output_source_filename): Don't print a filename more than once. * utils.c (fprint_symbol): New function. defs.h: Decalare it. various: Use fprint_symbol to print symbol names. Makefile.dist (SFILES, OBS): Add cplus-dem.{c,o}. Mon Mar 19 17:11:03 1990 Jim Kingdon (kingdon at mole.ai.mit.edu) * coffread.c (read_file_hdr): Add MC68K??MAGIC. * coffread.c (read_coff_symtab): Ignore swbeg and string label symbols. * coffread.c (read_coff_symtab): Increment num_object_files in case C_STAT not C_FILE. New variable in_source_file. Set it in case C_FILE. Check it in case C_STAT. * coffread.c [FUNCTION_EPILOGUE_SIZE]: New code. m-umax.h (FUNCTION_EPILOGUE_SIZE): Define. * config/3b1: New file. * config/sun*: Print message warning people to use GAS with GCC. Sun Mar 18 02:56:40 1990 Jim Kingdon (kingdon at mole.ai.mit.edu) * infcmd.c (run_stack_dummy): Change error message. * m-68k.h (REGISTER_VIRTUAL_TYPE): Make pc, fp, sp char *. * m-mips.h (LONGEST, BUILTIN_TYPE_LONGEST): Remove. Sat Mar 17 21:27:49 1990 Jim Kingdon (kingdon at mole.ai.mit.edu) * mips-dep.c: Remove infptrace.c stuff. * m-bigmips.h: New file. m-mips.h [MIPSEB]: Remove *_BIG_ENDIAN stuff. * m-sparc.h (FIX_CALL_DUMMY): Do not insert unimp instruction if function was compiled with gcc. * m-mips.h: Remove FIX_CALL_DUMMY_ALIGNED and make FIX_CALL_DUMMY use new args. * valops.c (call_function): New args to FIX_CALL_DUMMY. m-*.h (FIX_CALL_DUMMY): Take new args. * values.c (using_struct_return): New parameter gcc_p. valops.c (call_function): New variable using_gcc. valops.c (call_function) [REG_STRUCT_HAS_ADDR]: New code. * m-mips.h, mips-dep.c: New files from Forin. m-mips.h: Replace RETURN_STRUCT_BY_REF with USE_STRUCT_CONVENTION. Fri Mar 16 13:17:19 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * Makefile.dist: Add some dependencies of m-*.h files. (HFILES): Add m-68k.h. * dbxread.c (read_struct_type): Put "operator+" not "operator +" in symtab. * core.c: Split read_memory into read_memory_check and read_memory. breakpoint.c (insert_breakpoints): If can't read memory, tell user that error was due to seting breakpoints. Thu Mar 15 11:47:19 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * infrun.c [COFF_ENCAPSULATE]: Include a.out.encap.h. * blockframe.c (FRAMELESS_LOOK_FOR_PROLOGUE): Make it a function. various m-*.h: Call function not macro. frame.h: Declare the function. Wed Mar 14 02:44:51 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * sparc-dep.c: Include signame.h. * sparc-pinsn.c (print_insn): When looking for sethi before delayed branch, call read_memory_noerr not read_memory. * m-isi.h, m-sun3.h, m-news.h, m-hp300bsd.h, m-altos.h, m-hp300hpux.h, m-sun2.h: Merge machine stuff except inferior function call stuff into new file m-68k.h. Create m-3b1.h. Tue Mar 13 21:34:33 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * inflow.c (new_tty): If can't open tty, print error message before exiting. * blockframe.c: Remove declaration of psymtab_to_symtab. symtab.h: Declare psymtab_to_symtab. blockframe.c: Remove declarations of block_for_pc and find_pc_function_start. frame.h: Add declarations of block_for_pc and find_pc_function_start. Remove declaration of nonexistent function find_pc_function. values.c: include frame.h instead of declaring block_for_pc. * Version 3.90.2. Mon Mar 12 14:20:06 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * main.c (main): Delete superfluous "e" from long_options. Sat Mar 10 15:47:23 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * valprint.c (val_print): Print <%d bit integer> not just . * dbxread.c (error_type): Fix loop that finds '\0' so that on exit, *pp points to the '\0', not the character after. (read_type): Make sure that places which call read_type and then try to read more input stop immediately with another error upon encountering '\0'. * dbxread.c (read_range_type): Fix check for large signed integral type to match comment and reality. Set TYPE_LENGTH based on n2bits for signed, n3bits for unsigned. * infcmd.c (cont_command): Print warning message if we decide to ignore the argument. * gdb.texinfo (attach): @xref{Attach} -> @xref{Remote}. Fri Mar 9 16:26:47 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * symtab.h (address_class): Reinstate LOC_EXTERNAL with rewritten comment. * expread.y (yyerror, parse_c_1): Make yyerror take a char * arg. * main.c (symbol_completion_function): Don't call error() on "info jkldskf". * m-npl.h (USE_STRUCT_CONVENTION): Change >= to >. Thu Mar 8 00:19:01 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * symseg.h: Nuke more symseg references including LOC_EXTERNAL. Put contents of symseg.h into symtab.h and remove symseg.h. Wed Mar 7 18:02:15 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * symtab.h (SYMBOL_LINE): New macro. symtab.c (decode_line_1): Accept variable as well as function. Lookup variable/function in selected block if no file specified. printcmd.c: #if 0 out whereis_command. * command.c (do_setshow_command): Call function with additional argument C. main.c (set_history_size_command): Take argument C. (set_verbose): New function to set docstring. (initialize_main): Put set_verbose in command list. command.c (lookup_cmd_1): Accept result_list NULL. * valprint.c (_initialize_valprint): Change docstring for "set unionprint" to normal set/show form. * command.c (add_show_from_set): Check that docstring starts with "Set " before assuming it does. * main.c (show_history): Call cmd_show_list. command.{c,h} (cmd_show_list): New function. command.h: Declare do_setshow_command. * command.h (cmd_list_element): New field completer. main.c (symbol_completion_function): Use it. symtab.h: Declare make_symbol_completion_list. command.c (add_cmd): Set completer. main.c, gdbcmd.h (noop_completer): New function. infcmd.c: Set completer for environment functions. * symtab.c (types_info, _initialize_symtab): #if 0 out. various: Use fputs_filtered, not fprintf_filtered(%s). * valprint.c (type_print_base): Check for integers larger than LONGEST. * sun3-dep.c: Include "signame.h" instead of directly declaring sys_siglist. Tue Mar 6 14:59:34 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * infrun.c (signals_info): Allow argument to be a signal name as well as an expression. (handle_command): Check for error from sig_number. * main.c (float_handler): Change error message. * inflow.c (create_inferior): If getenv ("SHELL") exists, use it instead of /bin/sh. * dbxread.c (read_dbx_symtab, case N_SO): New variable first_symnum. Pass it to {start,end}_psymtab. * dbxread.c (read_ofile_symtab): Increment symbuf_idx and symnum when calling process_symbol_pair. * symtab.c (sources_info, output_source_filename): Re-write so output_source_filename takes a first parameter instead of a next one. * dbxread.c (read_dbx_symtab, case N_SO): When incrementing symbuf_idx, increment symnum also. * values.c (set_internalvar_component): Use VALUE_CONTENTS, not VALUE_CONTENTS_RAW. * symmisc.c (free_symtab): Don't free filename (now in symbol_obstack). * environ.c (init_environ): Copy entire string, including terminating '\0'. * value.h, values.c: Rename value_lazy to value_fetch_lazy. values.c (value_of_internalvar): Call value_fetch_lazy. * dbxread.c (read_huge_number): Return an error on encountering a large decimal number. * dbxread.c (read_huge_number): Reverse sense of overflow test. * valprint.c (val_print, case TYPE_CODE_INT): Check for integers larger than LONGEST. * dbxread.c (read_ofile_symtab): When calling process_one_symbol, call it with desc and value rather than with bufp->n_{desc,value}. * defs.h (LONG_MAX): Define. * sun3-dep.c: Declare sys_siglist. * infptrace.c: Move include of gdbcore.h after a.out.h * Makefile.dist (expread.o, mcheck.o): Remove leading "./" not leading ".". * m-hp300hpux.h [!HPUX_VERSION_5]: Define KERNEL_U_ADDR_HPUX. infptrace.c [KERNEL_U_ADDR_HPUX] [KERNEL_U_ADDR_BSD]: Set kernel_u_addr using nlist(). m-hp300bsd.h: Define KERNEL_U_ADDR_BSD. Mon Mar 5 16:52:41 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * dbxread.c (read_dbx_symtab): If value of .o symbol is crazy, don't end psymtab. * dbxread.c (read_dbx_symtab): Ignore first of a pair of N_SO when both appear. (start_subfile, start_symtab): Extra parameter dirname. (start_subfile): Use obsavestring, not savestring, for name. various: Call start_{subfile,symtab} with extra argument. (end_symtab): Set dirname field in symtab. (read_ofile_symtab): Call process_symbol_pair on pair of N_SO. (process_symbol_pair): New function. symtab.h (symtab): New field dirname. source.c (open_source_file): New function. source.c: Use open_source_file instead of openp where appropriate. * defs.h (TARGET_CHAR_BIT): Define. Sun Mar 4 13:11:48 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * dbxread.c (fill_symbuf): Print error messages nicely. * Makefile.dist (SFILES): Put standalone.c at end. * Makefile.dist (alldeps.mak): Put out backslash after arm-convert.s. * symtab.{c,h} (builtin_type_error): New type. symseg.h (type_code): Add TYPE_CODE_ERROR. valprint.c (val_print, type_print_base), values.c (using_struct_return, set_return_value): Check for and deal with TYPE_CODE_ERROR. dbxread.c (error_type): New function (read_type and subroutines): Call error_type instead of error. * dbxread.c (read_huge_number): New function. (read_range_type): Use read_huge_number and check results to see if it is a large integral type. * symmisc.c: Remove symseg stuff. * Gould NP1 changes from (or inspired by) chpmjd@gdr.bath.ac.uk dbxread.c (read_dbx_symtab) [N_NBSTS]: Treat this and N_NBLCS like N_LCSYM, etc. (process_one_symbol) [BLOCK_ADDRESS_ABSOLUTE]: New code. m-npl.h (USE_STRUCT_CONVENTION): Add. (IGNORE_SYMBOL): Add 0xa4. (END_OF_TEXT_DEFAULT): Remove. (STRING_TABLE_OFFSET): don't add sizeof(int). [!HAVE_VPRINTF]: Define vprintf to be doprnt, not printf. (BLOCK_ADDRESS_ABSOLUTE): Define. (BREAKPOINT): Pad to size of machine word. (SAVED_PC_AFTER_CALL): Remove ` at start of line (!). (R2_REGNUM): Define. (SP_REGNUM, FP_REGNUM): Switch definitions. (REGISTER_U_ADDR): Use FP_REGNUM in place of SP_REGNUM. (STORE_STRUCT_RETURN, EXTACT_RETURN_VALUE, STORE_RETURN_VALUE, call function stuff): Replace bogus definitions with correct ones for NP1. (CANNOT_EXECUTE_STACK): Define. (FRAME_LOCALS_ADDRESS): Don't add 80. (FRAME_FIND_SAVED_REGS): Also get SP. gould-pinsn.c (findframe): Move framechain declaration outside #if 0. infptrace.c (write_inferior_memory): Check addr against text_end and use PT_WRITE_I or PT_WRITE_D as appropriate. (store_inferior_registers): Don't try to write registers in CANNOT_STORE_REGISTER. m-npl.h (CANNOT_STORE_REGISTER): Define. npl-opcode.h (lil): 0xf8080000 -> 0xf80b0000. * munch: Distinguish between BSD and System V nm by actually seeing what output from nm looks like. Fri Mar 2 13:43:36 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * printcmd.c (print_frame_args): Change highest_offset to point to next unprinted arg. * main.c (main): Print "type help for list of commands" along with the version. Follow it with a blank line. Thu Mar 1 14:49:26 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * valprint.c: Move print_address for function from value_print to val_print. Wed Feb 28 15:06:12 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * Makefile.dist (m-sun4os4.h): Depend on m-sparc.h * Makefile.dist (version.c): Depend on Makefile.dist, not Makefile. * Makefile.dist: Change MAKEFILES to Makefiles. * symtab.h: Declare get_sym_file. core.c: Include symtab.h. * Move signal name stuff from utils.c to signame.c Move signal name stuff from defs.h to signame.h. Makefile.dist (SFILES, HFILES, OBS): Add signame.{c,h,o}. Mon Feb 26 12:03:12 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * command.c (add_cmd): Don't call savestring on name. Sun Feb 25 15:52:18 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * printcmd.c (print_frame_args): Make highest_offset an int. New variable args_printed. (print_frame_nameless_args): Remove parameter end and add num and first. (print_frame_args): Change call to print_frame_nameless_args. Fri Feb 23 21:40:15 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * stack.c (up_command, down_command): Only print stack frame if from_tty. Thu Feb 22 12:01:36 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * expread.y: Inlcude value.h and don't cast return value from lookup_internalvar. * infrun.c: Remove code in #ifdef UMAX_PTRACE. * values.c (convenience_info): Print in form "$foo = 5". Don't print "Debugger convenience variables:" before first one. * Makefile.dist: Remove ADD_FILES from CLIBS. (gdb, kdb, xgdb): Put in ADD_FILES as well as CLIBS. * m-pyr.h: #if 0 out call dummy stuff. Put in POP_FRAME which just calls error(). valops.c: If CALL_DUMMY is not defined, put in dummy call_function which just prints an error message. Tue Feb 20 22:11:40 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * breakpoint.c (commands_command): Add arg from_tty. * main.c (main): Put if (!setjmp (to_top_level)) around calls to *_command made in response to command line arguments. Mon Feb 19 13:58:28 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * main.c (main): Use getopt_long_only. Move one-character options to long_options. Remove entries which are just unambiguous abbreviations of other options. * command.h: Add types cmd_types and var_types. Add fields type, var_type, and var to struct cmd_list_element. command.c (add_set_cmd, add_set_from_show): New functions. (add_cmd): Set c->var_type. (add_abbrev_cmd): Call add_cmd instead of duplicating code. main.c: Add showlist. Move parse_binary_operation from main.c to command.c. command.c (do_setshow_command): New function. gdbcmd.h: New file. Makefile.dist: Add gdbcmd.h. many files: Include gdbcmd.h, use add_set_cmd and add_show_from_set. Replace info * with show * where appropriate. utils.c (fputs_filtered): Use UINT_MAX in lines_per_page to mean no paging. defs.h: Define UINT_MAX. infcmd.c (run_command): Use execute_command, not set_args_command. main.c (execute_command): Call do_setshow_command if necessary. main.c (show_command, show_history): New functions. main.c (initialize_main): Call add_prefix_cmd for show and show history. * coffread.c (enter_linenos): Print error if file_offset < linetab_offset. Sun Feb 18 15:37:05 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * convex-dep.c (comm_registers_info): Fix typo. ("argc"->"arg"). Wed Feb 14 20:45:14 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * config.gdb: Create Makefile with make. * Makefile.dist, config.gdb: Move "srcdir=" line from Makefile.dist to new file Makefile.srcdir. * valprint.c: Include . * value.h: Declare value_coerce_function. * findvar.c: Add missing " after #include "gdbcore.h * main.c (main): Re-write command parsing to use getopt. On "gdb +help" print options with '+' not '-'. Makefile.dist: Add getopt. Tue Feb 13 00:08:27 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * Makefile.dist: Add "srcdir=." config.gdb: Edit srcdir= rather than adding it to the beginning. * pyr-dep.c: Make global_reg_offset, last_frame_offset not static. Move definition of reg_stack_offset to core.c [REG_STACK_SEGMENT]. * config/pyramid: Print message about alloca. * breakpoint.c (clear_command): When printing "no breakpoint" error, only use arg if non-NULL. * core.c (read_memory): Rename to read_memory_noerr. (read_memory): New function which calls read_memory and checks for err. gdbcore.h: Declare all extern core.c functions. move myread from core.c to utils.c. declare it in defs.h. (read_memory_integer): move from infcmd.c to core.c. gdbcore.h: Declare it. Many places: Remove error checking on read_memory, or call read_memory_noerr instead. Include "gdbcore.h" if calling either. * value.h (COERCE_ARRAY): Coerce functions to function pointers. valops.c (value_coerce_function): New function. * core.c, convex-dep.c, arm-dep.c (xfer_core_file): Return EIO if address out of bounds. * m-arm.h, arm-dep.c arm-pinsn.c arm-opcode.h: New files. dbxread.c, m-convex.h (VARIABLES_INSIDE_BLOCK): Add gcc_p parameter. Makefile.dist (alldeps.mak): Special case for arm-convert.s. dbxread.c (define_symbol): Check for local based on it not being any one of the known deftypes. values.c (using_struct_return): Use new macro USE_STRUCT_CONVENTION. * Makefile.dist, config.gdb: Put in srcdir stuff. Mon Feb 12 22:46:16 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * breakpoint.c: Add addr_string and cond_string fields to struct breakpoint. (break_command_1): Set them. Use mention (). (mention): Create with code from break_command_1. (breakpoint_re_set): New function. (breakpoint_clear): Remove. (condition_command): Set cond_string. (breakpoint_delete): Free cond_string and addr_string. Declare parse_c_1's type and remove casts to struct expression *. symmisc.c (free_all_symtabs): Don't call breakpoint_clear. dbxread.c, coffread.c (reread_symbols): Call breakpoint_re_set, Include breakpoint.h. breakpoint.h: New file. dbxread.c: Move declaration of symmisc.c functions to symtab.h. Sun Feb 11 17:29:23 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * symtab.c: Make lookup_block_symtab extern. symtab.h: Declare it. valops.c (value_of_this): Use it. Fri Feb 9 08:59:37 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * config/hp300hpux: Print message telling people to use gcc. * value.h: Declare print_floating. printcmd.c (print_scalar_formatted, case 'f'): Use print_floating. valprint.c (val_print, case TYPE_CODE_FLT): Use print_floating. valprint.c (print_floating): Make this function out of is_nan and the code which was in val_print. Put parentheses around high & 0xfffff. Print sign and fraction for NaN's. Print 17 digits not 16 for doubles. (is_nan): Remove. m-news.h, m-sun3.h: Define IEEE_FLOAT. * Rename gld-pinsn.c to gould-pinsn.c. config/{pn,npl}: Change name of gld-pinsn.c Tue Feb 6 00:25:36 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * infptrace.c: Define PT_ATTACH if not defined. m-hp300hpux.h: Define ATTACH_DETACH. * main.c (initialize_main): Change alias class to aliases. * dbxread.c: Search and destroy references to symsegs. Also remove some #if 0'd code. * core.c: Remove reread_exec. dbxread.c (reread_symbols): New function. dbxread.c (symbol_file_command): Set symfile_mtime. coffread.c: Same. infcmd.c (run_command): Call reread_symbols not reread_exec. * valprint.c (val_print): When printing string after char *, print it for "" just like any other string. * core.c (reread_exec): New procedure. infcmd.c (run_command): Call reread_exec. * coffread.c (symbol_file_command): Add from_tty. * dbxread.c (symbol_file_command): Only ask about loading new symbol table if from_tty. Mon Feb 5 02:25:25 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * inflow.c (inferior_died): Call breakpoint_clear_ignore_counts. * Makefile.dist (OBS): Remove dbxread.o and coffread.o. * config.gdb: Ignore files ending in '#' in config. * stack.c (backtrace_command): Add QUIT to get_prev_frame loops. Sat Feb 3 22:25:09 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * Makefile.dist (YACC): Don't use -v. Fri Feb 2 19:26:50 1990 Jim Kingdon (kingdon at mole.ai.mit.edu) * createtags: Only change .o to .c at end of name. * Makefile.dist (alldeps.mak): new target. (Makefile): add alldeps.mak. (SOURCES): remove PINSNS. (TAGFILES: use ALLPARAM. (gdb.tar): add config/. * config.gdb: Check for M_FILE= not #param.h config/*: Make sure M_FILE= exists with space after M_FILE=. Makefile.dist (TAGS): Pass M_FILE and DEPFILES. createtags: Change .o to .c. Remove special tests for dep.c etc. * dbxread.c, coffread.c: Don't check COFF_FORMAT and READ_DBX_FORMAT. Makefile.dist: Move {dbx,coff}read.c from SFILES to ALLDEPFILES. config/*: add dbxread.o or coffread.o to depfiles. * Makefile.dist (depend): Depend on $(SOURCES), not force. Thu Feb 1 17:43:54 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * symmisc.c (print_symbol): Print newline after label. Wed Jan 31 22:35:38 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * dbxread.c (read_addl_syms): Remove code that checks for _etext. Move end_of_text_addr into read_dbx_symtab. (read_dbx_symtab): #if 0 out code which checks for _etext. Tue Jan 30 15:40:19 1990 Jim Kingdon (kingdon at albert.ai.mit.edu) * Makefile.dist (gdb.tar): Use readline's "make readline.tar" instead of having a list of readline files. * infrun.c (normal_stop): #if 0 out "you have found a bug in sh". * munch (-DSYSV): Check for .text at end of name. Optionally allow extra underscore before initialize. Remove space between #! and /bin/sh. * m-merlin.h: Put in clarifying comments about SHELL_FILE. Makefile.dist (install): Execute M_INSTALL. config/merlin: Define M_INSTALL. Mon Jan 29 04:32:09 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * inflow.c: Change all references to signal handlers from int (*)() to void (*)(). * main.c: Declare init_signals before use & make it void. Declare initialize_all_files. * Makefile.dist (config.status): New target. Sat Jan 27 00:19:50 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * defs.h (enum command_class): Remove comma after last element. * Makefile.dist (gdb.tar.Z): Use compress bar rather than deleting gdb.tar.Z before starting. * dbxread.c (process_one_symbol): Compare context_stack_depth with !VARIABLES_INSIDE_BLOCK, not VARIABLES_INSIDE_BLOCK. * mcheck.c: Put whole file in #if defined MALLOC_RANGE_CHECK. * mcheck.c (checkhdr): Call fatal_dump_core not abort. * mcheck.c: Copy from malloc distribution. * main.c (main): Call init_malloc (). * main.c (initialize_signals): Rename to init_signals. Fri Jan 26 00:53:23 1990 Jim Kingdon (kingdon at mole.ai.mit.edu) * *dep.c: Make core_file_command return void. * gdbcore.h [!KERNEL_U_ADDR]: Declare kernel_u_addr. infptrace.c [!KERNEL_U_ADDR]: Make it extern. * altos-dep.c (NBPG, UPAGES): Wrap #define in #if !defined. * m-pn.h (GOULD_PN): Define. *-pinsn.c: Include actual opcode table not just opcode.h * main.c [ALIGN_STACK_ON_STARTUP]: New code. m-i386.h: Define ALIGN_STACK_ON_STARTUP. * m-merlin.h (NO_SIGINTERRUPT, SHELL_FILE): Define. * Move code from infptrace [USE_PTRACE_GETREGS] to sun3-dep.c. m-sun{2,3}.h, m-sparc.h: Define FETCH_INFERIOR_REGISTERS. * Makefile.dist, config.gdb, config/*: Re-write to use machine-dependent makefiles instead of cpp. * m-hp300hpux.h: Define FETCH_INFERIOR_REGISTERS. infptrace.c: Put {fetch,store}_inferior_registers inside #if !defined FETCH_INFERIOR_REGISTERS. * Split execcore.c into exec.c and coredep.c. Move a bunch of stuff from coredep.c and *dep.c to gdbcore.h. * infptrace.c ({fetch,store}_inferior_registers): Use U_REGS_OFFSET to set offset. m-umax.h: Define U_REGS_OFFSET. * m-umax.h: Define PTRACE_{ATTACH,DETACH}. * m-i386.h (N_SET_MAGIC): Define. m-i386gas.h: add #undef N_SET_MAGIC. Thu Jan 25 18:39:45 1990 Jim Kingdon (kingdon at mole.ai.mit.edu) * m-hp300bsd.h: Remove KERNEL_U_ADDR. * infptrace.c [!KERNEL_U_ADDR]: Get address of kernel u area at runtime. * infptrace.c: Replace numbers with PT_KILL, etc. (store_inferior_registers): Loop for as many words are in the register. * infptrace.c [NO_SINGLE_STEP]: Call single_step(). * kill_inferior{,_fast}: Declare as returning void. * m-sun3.h (USE_PTRACE_GETREGS): Define. * execcore.c: Add IS_OBJECT_FILE & related stuff. * infptrace.c: Include . [ATTACH_DETACH] [USE_PTRACE_GETREGS]: New code. * Split default-dep.c into infptrace.c and execcore.c. * valprint.c [IEEE_FLOAT]: Change void * to char *. * breakpoint.c: Change printf_filtered(%s) to fputs_filtered. Wed Jan 24 00:35:52 1990 Jim Kingdon (kingdon at pogo.ai.mit.edu) * dbxread.c (symbol_file_command): When freeing everything, free the string table too. * Makefile.dist (gdb1): add "rm -f gdb1". * printcmd.c (print_scalar_formatted): If size is 0, use 'b' 'h', 'w', or 'g' depending on the type. * stack.c (backtrace_command): Read in symbols for frames we'll print before printing them. * valops.c (value_at): Don't print "I/O error" on EIO from ptrace. Don't print "out of bounds" for any ptrace error except EIO. * valprint.c (type_print_base, case TYPE_CODE_ENUM): Print "FOO = 5" not "FOO : 5". * symtab.{c,h}: Make lookup_misc_func extern. * Makefile.dist: Define VERSION in makefile, and generate version.c automatically. (gdb.tar): Use gdb-$(VERSION), not dist-gdb. * expread.y (yylex): Use lookup_primitive_typename to cut down on calls to lookup_symbol. symtab.{c,h} (lookup_primitive_typename): New function. (lookup_typename): Use it. * symtab.{c,h} (check_stub_type): New function. valprint.c (type_print_base, val_print, type_print_derivation_info), values.c (allocate_value): Call it. * printcmd.c (whereis_command): New function. symtab.c (lookup_symbol): Add symtab parameter. various: Pass additional argument to lookup_symbol. symseg.h (struct symbol): Add line field. dbxread.c (define_symbol): Set sym->line. * dbxread.c (symbol_file_command): Read string table into malloc'd memory (symfile_string_table) and leave it there. (psymtab_to_symtab): Use symfile_string_table. * utils.c (sig_abbrev): Return NULL if not found. infrun.c (sig_print_{header,info}): Consolidate duplicated code from handle_command, signals_info. (sig_print_info): Just print number if no name from sig_abbrev. * Makefile.dist (OTHERS): Add ChangeLog-3.x * infrun.c (restore_inferior_status): #if 0 out "Unable to restore previously selected frame" error message. * infrun.c (signals_info, handle_command): Print signal abbrevs along with numbers. * infrun.c (handle_command): Accept symbol signal names. * utils.c (sig_{number,abbrev}, init_sig): New functions. _initialize_utils: Call init_sig for each signal. defs.h: Declare them. * default-dep.c (read_inferior_memory): Check quit_flag in fetch loop. * Changes for lazy fetching (speeds things up for big objects): value.h (struct value): New field lazy. VALUE_CONTENTS_RAW, VALUE_LAZY, value_at_lazy: New. findvar.c (read_var_value): Set lazy instead of fetching. various: Copy into VALUE_CONTENTS_RAW, not VALUE_CONTENTS. valops.c: Add value_at_lazy, value_lazy. various: Call value_at_lazy instead of value_at. * symtab.h (LONGEST): Define. * m-*.h (LONGEST, BUILTIN_TYPE_LONGEST): Delete (in symtab.h). * infrun.c (wait_for_inferior): #if 0 out stop if ABOUT_TO_RETURN * version.c: Change version number to 4.0development For older changes see ChangeLog-3.x Local Variables: mode: indented-text left-margin: 8 fill-column: 74 version-control: never End: