2000-03-20 Kevin Buettner * utils.c (floatformat_from_doublest): Don't assume that a long will be exactly 32 bits in length. Also... make sure space that we're writing the float to is completely initialized to zeroes, even when the number of bits in the float is not evenly divisible by FLOATFORMAT_CHAR_BIT. 2000-03-20 Jim Blandy * i386-linux-nat.c: No need to #include "frame.h" any more. (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0, LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1, LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code, LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start, LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0, LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1, linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN, i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp, i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET, i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET, i386_linux_sigtramp_saved_sp): Deleted. Folks rightly pointed out that these are target-dependent, and useful in non-native configurations. Moved to... * i386-linux-tdep.c: ... Here, a new file. * Makefile.in (ALLDEPFILES): Add i386-linux-tdep.c. (i386-linux-tdep.o): New rule. (i386-linux-nat.o): We no longer depend on frame.h. * config/i386/linux.mt (TDEPFILES): Add i386-linux-tdep.o. 2000-03-04 Eli Zaretskii * event-loop.c (top-level) [NO_FD_SET]: Deprecate this branch. Print an error at compile time if we are to use select, but FD_SET is not available. (SELECT_MASK, NBBY, FD_SETSIZE, NFDBITS, MASK_SIZE): Define only if HAVE_POLL is not defined and NO_FD_SET *is* defined. (create_file_handler) [!HAVE_POLL]: Use FD_SET and FD_CLR. (delete_file_handler) [!HAVE_POLL]: Use FD_CLR and FD_ISSET. (gdb_wait_for_event) [!HAVE_POLL]: Copy fd_set sets directly instead of using memcpy and memset. Use FD_ISSET. * config/i386/xm-go32.h (fd_mask): Remove typedef. Mon Mar 20 19:58:45 2000 Andrew Cagney * command.c (_initialize_command): Document requirements for ``!'' command. Mon Mar 20 18:12:46 2000 Andrew Cagney From Fri 10 Mar 2000 Robert : * sh-tdep.c (sh_processor_type_table): Add entry for sh2. Mon Mar 20 17:33:32 2000 Andrew Cagney From Thu Mar 16 16:49:27 EST 2000 John David Anglin : * configure.in (CONFIG_INITS): Don't include hpux-thread.c. Stops _initialize_hpux_thread being called twice. * configure: Regenerated. 2000-03-19 Eli Zaretskii * event-top.c (_initialize_event_loop): If instream is not connected to a terminal device, turn editing off. 2000-03-19 Eli Zaretskii Support for building GDB with DJGPP, and running the test suite on it: * config/djgpp/djconfig.sh: New file. * config/djgpp/config.sed: New file. * config/djgpp/README: New file. * config/djgpp/fnchange.lst: New file. * config/djgpp/djcheck.sh: New file. 2000-03-19 Eli Zaretskii * ser-go32.c (ports): Make the initializers complete, to pacify GCC 2.9X. 2000-03-17 Jim Blandy * i386v-nat.c (i386_insert_nonaligned_watchpoint): Use a two-dimensional array, instead of faking it with explicit index arithmetic. * linux-thread.c (linuxthreads_attach, linuxthreads_detach, linuxthreads_create_inferior): Fix typo in variable name: it's linuxthreads_exit_status, not linux_exit_status. * gdb_wait.h (WSETSTOP): Pass the appropriate number of arguments to W_STOPCODE. * solib.c (solib_add): Delete debugging code. 2000-03-17 Mark Kettenis * gdb_wait.h: add definitions of WSETSTOP and WSETEXIT for Linux. * linux-thread.c: Use WSETSTOP instead of W_STOPCODE. Fri Mar 17 11:06:59 2000 Philippe De Muyter * language.c (set_lang_str): Do not call `free' for a null pointer. (set_type_str, set_range_str): Ditto. 2000-03-16 Jim Blandy * i386-linux-nat.c (i386_linux_saved_pc_after_call): Lost in the merge; reinstated. * solib.c (current_sos): Be more careful about freeing the new so_list node if an error occurs. * i386-tdep.c (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0, LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1, LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code, LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start, LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0, LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1, linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN, i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp, i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET, i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET, i386_linux_sigtramp_saved_sp): Deleted. These all implement Linux-specific signal trampoline detection, and should be moved to... * i386-linux-nat.c: ... here. * config/i386/tm-linux.h (I386_LINUX_SIGTRAMP): No need to define this any more, since we're not enabling OS-specific code in a OS-independent file. 2000-03-16 Eli Zaretskii * Makefile.in (go32-nat.o): Add prerequisites. (ALLDEPFILES): Add go32-nat.c. 2000-03-15 Michael Snyder From "Peter.Schauer" * symfile.c (reread_symbols): Clear msymbol hash table. 2000-03-15 Jim Blandy Deal with the inferior unloading shared objects. * solib.c (current_sos): New function, replacing find_solib. (find_solib): Deleted. (free_so): New function. (clear_solib): Call free_so, instead of writing it out. (solib_add): Rewritten: compare the inferior's current list of shared objects with GDB's list, and do the required loads and unloads. (info_sharedlibrary_command, solib_address): Don't use find_solib to walk the list of shared libraries: call solib_add, and then walk the list at so_list_head normally. * objfiles.c (free_objfile): Don't call CLEAR_SOLIB, and don't detach the core target. These tasks are taken care of elsewhere. * target.c (remove_target_sections): New function. * target.h (remove_target_sections): New declaration. * solib.c (symbol_add_stub): Check whether we've already created an objfile for this shared object first, before doing all that work to compute section addresses, etc. * objfiles.c (unlink_objfile): Report an internal error if objfile doesn't occur in the object_files list. * solib.c (special_symbol_handling): Delete argument; it's not used. Changes from Peter Schauer : * solib.c (SOLIB_EXTRACT_ADDRESS): New macro to extract addresses from solib structures. Use it throughout solib.c, get rid of all CORE_ADDR casts. (struct so_list): Change type of lmaddr to CORE_ADDR. (first_link_map_member): Change return value type to CORE_ADDR, update callers. (solib_add_common_symbols): Change parameter type to CORE_ADDR, update callers. (open_symbol_file_object, find_solib): Change type of lm variable to CORE_ADDR. 2000-03-15 Eli Zaretskii * ser-go32.c (dos_noop, dos_raw, dos_noflush_set_tty_state) (dos_print_tty_state, dos_info, _initialize_ser_dos): Convert to ISO C. Use ATTRIBUTE_UNUSED to avoid compiler warnings. (dos_info): Avoid compiler warning when printing a ptrdiff_t. * ser-go32.c (dos_get_tty_state): Fail if the (fake) handle was not opened by dos_open, but let the 3 standard handles go through unharmed. 2000-03-14 Elena Zannoni * eval.c (evaluate_subexp_with_coercion): Add call to check_typedef, to handle typedeffed vars correctly. Mon Mar 13 21:21:41 2000 Andrew Cagney * defs.h (STREQ, STRCMP, STREQN): Document that these macros are somewhat redundant. (QUIT): Note that this can probably be replaced by a function. 2000-03-13 James Ingham Add support for a variable object that tries to evaluate itself in the currently selected frame, rather than in a fixed frame. * wrapper.c,h (gdb_parse_exp_1): Added a wrapper for gdb_parse_exp_1. * varobj.h: Added USE_CURRENT_FRAME to varobj_type & changed def'n of varobj_create. * varobj.c (varobj_list): Return type indicates whether the variable's type has changed (for current frame variables). (varobj_update): Handle the case where the variable's type has changed. (delete_variable_1): Allow for deletion of variables that have not been installed yet. (new_root_variable): Initialize use_selected_frame variable. (value_of_root): This is where most of the work to handle "current frame" variables was added. Most of the complexity involves handling the case where the type of the variable has changed. (varobj_create): Add a "type" argument, to tell if the variable is one of these "current frame" variables. Also protect call to parse_exp_1 from long jumping. 2000-03-13 Eli Zaretskii * go32-nat.c (struct env387): Remove declaration. (print_387_status, i386_go32_float_info): Remove redundant functions. (regno_mapping, sig_map, excepn_map): Add braces around inner initializers. (many functions): Use ATTRIBUTE_UNUSED to shut up the compiler; fix code which mixed signed with unsigned. (go32_resume): Use TARGET_SIGNAL_LAST instead of -1. (go32_wait): Initialize INT3_addr. (go32_fetch_registers): Extend all FP registers that are shorter than 4 bytes to 32 bits. Support 32 standard FP registers defined on config/i386/tm-i386.h. (store_register): Support 32 FP registers. (go32_create_inferior): Don't crash if handed a NULL pointer instead of exec file name. (ignore): Remove unused function. (go32_insert_hw_breakpoint): Remove unused variables. (init_go32_ops): Set value of processing_gcc_compilation to 2. Mon Mar 13 18:54:42 2000 Andrew Cagney From 2000-03-10 Daniel Berlin Fix C++ overloading, add support for seeing through references: * valops.c (find_overload_match): Handle STABS overloading for C++. (find_overload_match): Look in right place for function arguments in the debug info. (find_overload_match): Rather than giving up when we have >1 perfect match, just choose one, especially since the recommendation GDB gives ("disambiguate it by specifying function signature"), is basically impossible. (check_field_in): STREQ->strcmp_iw (search_struct_field): STREQ->strcmp_iw (find_method_list): STREQ->strcmp_iw * gdbtypes.c (rank_one_type): Add ability to see through references. (rank_one_type): strcmp->strcmp_iw, because the whitespace could be different. (rank_function): Rank function properly (was doing it wrong before, comparing the wrong parts of the arrays) (rank_one_type): Change #if 0 to #ifdef DEBUG_OLOAD. * gdbtypes.h: Add REFERENCE_CONVERSION_BADNESS for "badness" associated with converting a non-reference to a reference. * gdbtypes.c (rank_one_type): Add comment on how to eliminate the #ifdef DEBUG_OLOAD. 2000-03-11 Mark Kettenis * gnu-nat.c: Fix the formatting where indent misinterpreted `&' as a binary operator. (gnu_attach): Change error message for missing argument to be identical to the corresponding message in `inftarg.c'. This makes the testsuite happy. 2000-03-11 Mark Kettenis * i386gnu-nat.c (gnu_store_registers): Make sure the T bit in the %eflags isn't modified. This fixes a bug where every call to a function in the program beyond the first call would fail. Fri Mar 10 11:44:55 2000 Andrew Cagney * MAINTAINERS: Devolve responsibility for domain maintenance. 2000-03-06 Elena Zannoni * minsyms.c (prim_record_minimal_symbol_and_info): Add comment. 2000-02-25 Scott Bambrough * gdb.base/long_long.exp: Correct test suite failure when printing a long long value as a double on ARM platforms. Thu Mar 9 14:21:07 2000 Andrew Cagney * MAINTAINERS (Core): Anthony Green is the Java - including testsuite - maintainer. Reformat testsuite and language support sections 2000-03-08 Mark Kettenis * i386-tdep.c (i386_linux_saved_pc_after_call): New function. * config/i386/tm-linux.h (SAVED_PC_AFTER_CALL): Define to call i386_linux_saved_pc_after_call. 2000-03-06 Jim Blandy From Tom Tromey and Keith Seitz : * minsyms.c: #include , for msymbol_hash_iw. (compact_minimal_symbols): Added `objfile' argument. Put symbols in the objfile's hash table. (install_minimal_symbols): Put symbols in the objfile's demangled hash table. (lookup_minimal_symbol): Use hash table to find symbol in objfile. (msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): New functions. (prim_record_minimal_symbol_and_info): Initialize the hash link fields of the new minimal symbol. * symtab.h (struct minimal_symbol): New fields `hash_next', `demangled_hash_next'. (msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): Declare. * objfiles.h (MINIMAL_SYMBOL_HASH_SIZE): New define. (struct objfile): New fields `msymbol_hash', `msymbol_demangled_hash'. 2000-03-06 Jim Blandy * solib.c (first_link_map_member): Doc fix. 2000-03-06 Elena Zannoni From Eli Zaretskii : * event-loop.c (poll_timers): Don't compare delta.tv_sec with zero, since time_t might be unsigned. 2000-03-06 Mark Kettenis * i386-linux-nat.c (supply_fpregset): Mask off the reserved bits in *FPREGSETP. (convert_to_fpregset): Don't touch the reserved bits in *FPREGSETP. 2000-03-05 Mark Kettenis Allow GDB to run on Linux 2.0 again. * config.in: Add HAVE_PTRACE_GETREGS. * configure.in: Check if defines PTRACE_GETREGS. * configure: Regenerated. * config/i386/nm-linux.h (CANNOT_FETCH_REGISTER, CANNOT_STORE_REGISTER): New defines. * i386-linux-nat.c (have_ptrace_getregs): New variable. (PTRACE_XFER_TYPE, CANNOT_FETCH_REGISTER, fetch_register, old_fetch_inferior_registers, CANNOT_STORE_REGISTER, store_register, old_store_inferior_registers): Copied over from `inptrace.c' as a temporary measure. (fetch_regs, store_regs, fetch_fpregs, store_fpregs): Conditionalize on HAVE_PTRACE_GETREGS. Define stubs if HAVE_PTRACE_GETREGS isn't defined. (fetch_regs): Reset `have_ptrace_getregs' if ptrace call fails with EIO. (fetch_inferior_registers, store_inferior_registers): Fall back on the method use in `infptrace.c' (by calling old_fetch_inferior_registers and old_store_inferior_registers) if `have_ptrace_getregs' isn't set. 2000-03-05 Mark Kettenis * i386-linux-nat.c: Use elf_gregset_t and elf_fpregset_t instead of gregset_t and fpregset_t. Those are the only names that are guaranteed to specify the right types for all supported Linux systems out there. Various doc fixes and gratitious local variable renames, all in an attempt to stress similarities between the code and unify the terminology used. Use ISO-C all over. (regmap): Remove trailing comma. (FPREG_ADDR): Renamed from FPREGSET_T_FPREG_ADDR. (convert_to_gregset): Make static. Remove GDB_REGS argument. It is unnecessary and wasn't used anyway. All callers changed. (convert_to_fpregset, convert_to_xfpregset): Likewise. (fetch_regs, store_regs): Remove unused variable `regno'. (fill_fpregs): If REGNO is not -1, only update the specified register. (fetch_core_registers): Renamed from i386_linux_fetch_core_registers. There is no need for a unique name since the function is static anyway. (linux_elf_core_fns): Renamed from i386_linux_nat_core_functions since it is more descriptive. Sun Mar 5 19:40:27 2000 Andrew Cagney * MAINTAINERS (readline/): Expand to include host maintainers. 2000-03-04 Mark Kettenis Fix support for Linux/i386 signal trampolines. The old approach didn't work for Linux 2.2 and beyond, and didn't work with recent versions of the GNU C library. * i386-tdep.c (LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0, LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): New defines. (linux_rt_sigtramp_code): New variable. (LINUX_RT_SIGTRAMP_LEN): New define. (i386_linux_rt_sigtramp_start): New function. Detect start of signal trampolines for RT signals. (i386_linux_sigtramp): Removed. (i386_linux_in_sigtramp): New function. (i386_linux_sigcontext_addr): New function. Recognize the names of the signal tranmpolines used by recent versions of the GNU C library, and add support for RT signals. (LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET): New defines. Moved here from config/i386/tm-linux.h. (i386_linux_sigtramp_saved_pc, i386_linux_sigtramp_saved_sp): Reimplement in terms of i386_linux_sigcontext_addr. * config/i386/tm-linux.h (LINUX_SIGCONTEXT_SIZE): Removed. (LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET): Moved to i386-tdep.c. (IN_SIGTRAMP): Redefine to call i386_linux_in_sigtramp. Sat Mar 4 19:38:11 2000 Andrew Cagney By: Sat Mar 4 04:08:58 2000 Alexandre Oliva * Makefile.in (all-gdbtk): Fix $srcdir to ${srcdir}. Sat Mar 4 17:23:06 2000 Andrew Cagney * MAINTAINERS: Frank Ch. Eigler and Andrew Cagney co-ordinate the sim directory. Sat Mar 4 16:19:31 2000 Andrew Cagney * MAINTAINERS: Add Michael Snyder and Peter Schauer to list of ``Blanket Write Privs'' maintainers. Sat Mar 4 15:58:40 2000 Andrew Cagney From Sun 20 Feb 2000 Robert Lipe : * language.c (longest_local_hex_string_custom): Don't compile 'long long' section if host doesn't have 'long long'. Sat Mar 4 15:45:38 2000 Andrew Cagney * language.c (longest_raw_hex_string): Comment out. Appears unused. Sat Mar 4 13:02:09 2000 Andrew Cagney * utils.c (mcalloc), defs.h (mcalloc): Keep consistent with "mmalloc.h" which means using PTRs. (init_malloc, msavestring, mstrsave): Convert to PTR free ISO-C. Sat Mar 4 11:49:21 2000 Andrew Cagney * defs.h (store_address, store_unsigned_integer, store_address): Replace PTR with void* in delcaration. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, extract_address, store_signed_integer, store_unsigned_integer, store_address): Convert definition to ISO-C. Replace PTR with void*. Sat Mar 4 10:57:25 2000 Andrew Cagney * defs.h (make_cleanup_func): Document as deprecated. (make_cleanup_ftype): New typedef. Make signature consistent with other function typedefs. Document as not be used out side of make_cleanup code. Use in make_cleanup declarations. (null_cleanup): Replace PTR with void*. * utils.c (make_cleanup, make_final_cleanup, make_run_cleanup, make_exec_cleanup, make_exec_error_cleanup, make_my_cleanup, null_cleanup): Change K&R definition to ISO-C using void* and make_cleanup_fytpe. (discard_my_cleanups): Don't cast argument to free. 2000-03-03 Elena Zannoni * defs.h (struct continuation_arg): Change type of field 'data' from PTR to void *. * event-loop.h: Eliminate uses of PTR, use 'void *' instead. * event-top.c: Ditto. Fri Mar 3 15:39:34 2000 Andrew Cagney * Makefile.in (CONFIG_CLEAN, CONFIG_ALL, LN_S): Defined by configure. (SUBDIR_MI_CLEAN, SUBDIR_GDBTK_CLEAN, SUBDIR_MI_ALL, SUBDIR_GDBTK_ALL): Define. (all-gdbtk, clean-gdbtk): New targets. (all): Add CONFIG_ALL as dependency. (clean): Add CONFIG_CLEAN as dependency. * configure.in (CONFIG_ALL, CONFIG_CLEAN): Define. (LN_S): Define. Delete GDBtk's link code. Fri Mar 3 13:12:34 2000 Andrew Cagney * configure.in (ENABLE_GDBTK): Delete variable. (enable-gdbtk): Only enable gdbtk when there is a GDBTK directory. * Makefile.in: Update. * configure: Regenerate 2000-03-02 Elena Zannoni * config/alpha/alpha-linux.mh: Remove core-regset.o fron the NATDEPFILES list. 2000-03-02 Mark Kettenis * config/i386/tm-i386aix.h (NUM_FPREGS, NUM_REGS, REGISTER_BYTES): Override definitions to include the normal FPU registers. (REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Removed. The default definitions are fine for AIX/i386. (i387_to_double, double_to_i387): Remove prototypes. 2000-03-02 Kevin Buettner * findvar.c (extract_floating, store_floating): Use target floating point type sizes rather host sizes to determine which conversion needs to be done. 2000-03-02 Nick Duffek * uw-thread.c: Apply GNU conventions to comment formatting. (deactivate_uw_thread): Call remove_thread_event_breakpoints(). (uw_thread_mourn_inferior): Move remove_thread_event_breakpoints() call to deactivate_uw_thread(). Thu Mar 2 09:04:46 2000 Andrew Cagney * MAINTAINERS: Daniel Berlin is C++ maintainer. Thu Mar 2 08:55:35 2000 Andrew Cagney * MAINTAINERS: Mark Kettenis is the x86 architcture maintainer and a joint GNU/Linux/x86 maintainer. Nick Duffeck and Robert Lipe share SCO/Unixware. Nick Duffek and Peter Schauer share Solaris/x86. Wed Mar 1 22:12:35 2000 Andrew Cagney From Wed 23 Feb 2000 Fernando Nasser : * remote-sim.c (gdbsim_close): Call generic_mourn_inferior. * remote-rdi.c (arm_rdi_close): Ditto. Wed Mar 1 19:31:32 2000 Andrew Cagney * CONTRIBUTE (configure.in): Note that patches to configure are not needed. 2000-03-01 Mark Kettenis * MAINTAINERS: Correct my own mail address. Wed Mar 1 11:26:07 2000 Andrew Cagney * MAINTAINERS: Document people with paperwork pending. Wed Mar 1 00:49:06 2000 Andrew Cagney From 2000-02-28 Peter Schauer : Make NEW_PROC_ABI interface functional on Solaris x86. * sol-thread.c (ps_lgetLDT): Rewrite to use new procfs_find_LDT_entry function from procfs.c, mostly copied from lin-thread.c. * inferior.h, procfs.c (procfs_get_pid_fd): Removed, no longer needed. Wed Mar 1 00:34:55 2000 Andrew Cagney From 2000-02-26 Peter Schauer : * config/i386/tm-i386sol2.h (MERGEPID): Define. Wed Mar 1 00:06:19 2000 Andrew Cagney From 1999-08-13 J.T. Conklin : * config/i386/tm-i386.h (FRAME_INIT_SAVED_REGS): Replace FRAME_FIND_SAVED_REGS. (i386_frame_init_saved_regs): Replace i386_frame_find_saved_regs. * i386-tdep.c (i386_frame_init_saved_regs, i386_pop_frame): Update. Tue Feb 29 23:56:41 2000 Andrew Cagney From 2000-02-23 Peter Schauer : * objfiles.c (open_mapped_file): Fix obsolete references to `mapped' parameter. Tue Feb 29 18:47:58 2000 Andrew Cagney From 2000-02-23 Eli Zaretskii : * config/i386/nm-go32.h (FLOAT_INFO): Remove macro definition. (top level): Add prototypes for go32_* functions. * config/i386/tm-go32.h (I386_DJGPP_TARGET): Define. (FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC): Override definitions from tm-i386.h. (REGISTER_VIRTUAL_TYPE): Remove macro definition. * i386-tdep.c (i386_extract_return_value) [I386_AIX_TARGET || I386_GNULINUX_TARGET]: Add I386_DJGPP_TARGET to the list of targets which return FP values in FP registers. * i386-tdep.c (i386_extract_return_value): Add FIXME recommending that this function be re-implemented using multi-arch. Tue Feb 29 18:40:08 2000 Andrew Cagney From 2000-02-23 Eli Zaretskii : * utils.c [__GO32__]: Include pc.h, for prototypes of ScreenCols and ScreenRows. * ser-go32.c: Include string.h, for prototype of strncasecmp. (dpmi_regs, dpmi_sregs): Remove unused variables. (dos_flush_input): Return a value, to prevent compiler warning. * expprint.c (dump_prefix_expression): Use %ld in format and cast sizeof(union exp_element) to long, to prevent GCC from complaining about format/argument mismatch. (dump_postfix_expression): Likewise. Tue Feb 29 18:09:46 2000 Andrew Cagney * arm-tdep.c: Include . Tue Feb 29 17:33:49 2000 Andrew Cagney From Wed, 23 Feb 2000 Fernando Nasser : * stack.c (backtrace_command_1), infrun.c (normal_stop): Check that the target's stack was valid. Tue Feb 29 15:14:56 2000 Andrew Cagney From 2000-02-22 Stephane Carrez : * dwarf2read.c (read_address): Read 16-bits addresses. 2000-02-28 Scott Bambrough * arm-linux-nat.c (fetch_nw_fpe_*): Renamed to fetch_nwfpe_* to use the same naming convention as in the Linux kernel. Modified prototype to get rid of unused parameters. (store_nw_fpe_*): Renamed to store_nwfpe_* to use the same naming convention as in the Linux kernel. Fixed calls to fetch_nwfpe_*. (store_fpregs): Fixed calls to store_nwfpe_*. Removed unused variable. Mon Feb 28 18:24:32 2000 Andrew Cagney * MAINTAINERS: Transfer d30v maintainership to David Taylor. 2000-02-28 Christopher Faylor * win32-nat.c: Remove unneeded header. * wince.c: Ditto. Mon Feb 28 13:34:54 2000 Andrew Cagney * wince.c: Include "gdb_wait.h" and not "wait.h". Mon Feb 28 10:58:45 2000 Andrew Cagney * MAINTAINERS: Mention mmalloc. Expand Host/Native and Target/Architecture maintainers descriptions. 2000-02-26 Mark Kettenis * gnu-nat.c: Include "gdbthread.h". Include . Reorder headers a bit. Overall cleanup and minor reformatting. (MIG_SERVER_DIED): Remove define. (proc_update_sc): Add braces to silence compiler warning. (proc_steal_exc_port): Initialize err to zero. (make_proc): Add braces to silence compiler warning. (inf_validate_task_sc): Add cast to silence compiler warning. (inf_set_traced): Reorganize a bit to silence compiler warning. (inf_validate_procs): Use mach_msg_type_number_t for all thread numbers and add braces to silence compiler warning. (gnu_wait): Add prototypes for server functions and add braces to silence compiler warnings. (S_exception_raise_request): Pass subcode to inf_debug call. (gnu_write_inferior): Remove unused variable `protection_changed'. (gnu_xfer_memory): Remove unused variable `result'. (set_sig_thread_cmd): Remove unused varible `tid'. (set_signals_cmd): Remve unused variable `trace'. (add_task_commands): Provide complete prototype. Reformat help strings a bit to make sure the first line is a full sentence. Call info_port_rights_cmd instead of info_send_rights_cmd for the "info port-rights" command. (add_thread_commands): Provide complete prototype. Make static. Reformat help strings a bit to make sure the first line is a full sentence. (_initialize_gnu_nat): Provide complete prototype. 2000-02-26 Mark Kettenis Make cross-compilation for the Hurd more friendly. From Jeff Bailey : * configure.in: Use AC_CHECK_TOOL to find MiG. * Makefile.in (MIG): New variable. * config/i386/i386gnu.mh (MIG): Remove. * configure: Regenerated. 2000-02-26 Kevin Buettner * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add comment explaining motivation behind this function and why the generic facilities won't work for this platform. * rs6000-tdep.c (skip_prologue): Always test to make sure that an instruction is read successfully from the target's memory. Introduce notion of instructions which may appear in the prologue, but may not end the prologue. Added explicit check for nop instruction. Use memset() to zero the frame data instead of assignment from a statically allocated, uninitialized structure. Sat Feb 26 17:15:16 2000 Andrew Cagney * MAINTAINERS: Chris Faylor is responsible for all MS Windows systems. Note that Jim Blandy as maintainer for ``tracing bytecode stuff'' 2000-02-25 Fernando Nasser From: Thomas Zenker * rdi-share/hsys.c: to compile under 4.4BSD derived systems (FreeBSD, NetBSD...) sys_errlist should not be declared in hsys.c. NEED_SYSERRLIST is set already by configure, so we can use it. * rdi-share/unixcomm.c: 4.4BSD derived systems define BSD, but are posix compliant and we should not work with the old compatibility stuff. Because of that I undef BSD in case of FBSD etc and include sys/ioctl to get the flags. * rdi-share/unixcomm.c: If the TIOCEXCL flags exists set serial line for exclusive use. 2000-02-24 Kevin Buettner * ppc-linux-tdep.c (ppc_sysv_abi_push_arguments): Put address of return structure in r3 if necessary. (ppc_linux_memory_remove_breakpoints): New function. * rs6000-tdep.c (skip_prologue): Make sure that the cases for storing either cr or lr to the stack only handle those cases. (I.e, don't let these cases match 0x00000000 which is found found in the shared library trampoline prior to the loading of the shared library.) * config/powerpc/tm-linux.h (ppc_linux_memory_remove_breakpoint): Declare. (MEMORY_REMOVE_BREAKPOINT): Define. Wed Feb 23 23:27:48 2000 Andrew Cagney * hppah-nat.c: Include "gdb_wait.h" instead of . Thu Feb 24 18:42:15 2000 Andrew Cagney * configure.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Set to $(SUBDIR_*_INSTALL) when so configured. * configure: Regenerate. * Makefile.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Define using configure. (install-only): Add dependency on $(CONFIG_INSTALL). Delete code installing GDBtk. (uninstall): Add dependency on $(CONFIG_UNINSTALL). (SUBDIR_MI_INSTALL, SUBDIR_MI_UNINSTALL, SUBDIR_GDBTK_UNINSTALL, SUBDIR_GDBTK_INSTALL): Define. (install-gdbtk): New target. Thu Feb 24 18:19:52 2000 Andrew Cagney * configure.in (SUBDIR_MI_CFLAGS): Fix typo, wrong brace. * configure: Regenerate. 2000-02-24 Christopher Faylor * configure.tgt: Add arm, mips, sh wince targets. * config/arm/tm-wince.h: New file. * config/arm/wince.mt: New file. * config/sh/tm-wince.h: New file. * config/sh/wince.mt: New file. * config/mips/tm-wince.h: New file. * config/mips/wince.mt: New file. * wince.c: New file. * wince-stub.c: New file. * wince-stub.h: New file. * sh-tdep.c: Use correct register names for Windows CE. Wed Feb 23 19:01:45 EST 2000 Nicholas Duffek * top.c (SIGJMP_BUF, SIGSETJMP, SIGLONGJMP): Update comments. (error_return, quit_return): Merge into catch_return pointer. (return_to_top_level): Update comment. Longjmp to *catch_errors, and communicate reason to catch_errors via setjmp return value. (catch_errors): Always catch both quit and error, and if a catch wasn't requested by caller, throw it to the next catch_error. Replace dual longjmp buffer memcpy with single pointer change. Add FIXME for possibly adding new interface to tell caller what event was caught. Add extensive comments. * defs.h (enum return_reason): Reserve 0 for use as initial setjmp() return value. (RETURN_MASK): New public macro to generate RETURN_MASK_* from enum return_reason. (RETURN_MASK_QUIT, RETURN_MASK_ERROR): Define using RETURN_MASK. 2000-02-23 Fernando Nasser * infcmd.c (run_stack_dummy): Do not pop frame on random signal. * valops.c (_initialize_valops): Add command "set unwindonsignal". (hand_function_call): Test for unwind_on_signal and act accordingly. Wed Feb 23 12:58:46 2000 Andrew Cagney * gdbarch.sh (dis_asm_read_memory): Change LEN to unsigned long. Match ../include/dis-asm.h change. * gdbarch.h: Regenerate. * corefile.c (dis_asm_read_memory): Update. Mon Feb 21 13:57:27 2000 Andrew Cagney * configure.in (CONFIG_INITS): Fix typo, was CONFIG_INIT. (ENABLE_CFLAGS): Move initialization to start of file. (enable-gdbmi): Add new configure option --enable-gdbmi. When selected and an ${srcdir}/mi directory is present enable MI interface. * configure: Regenerate. * Makefile.in (SUBDIR_MI_OBS, SUBDIR_MI_SRCS, SUBDIR_MI_DEPS, SUBDIR_MI_INITS, SUBDIR_MI_LDFLAGS, SUBDIR_MI_CFLAGS): New macros. (CONFIG_OBS, CONFIG_SRCS, CONFIG_DEPS, CONFIG_INITS, CONFIG_LDFLAGS): New macros. Initialized by autoconf via @CONFIG...@. (INTERNAL_LDFLAGS, CDEPS, LINTFILES, DEPFILES, SOURCES, INIT_FILES): Use $(CONFIG_...) instead of @CONFIG...@. * mi: New directory. MI interface to GDB. * defs.h (interpreter_p): Declare when UI_OUT. * top.c (gdb_init): When interpreter_p, check that the interpreter was recognized by one of the linked in interpreters. * main.c (interpreter_p): Define. (captured_main): When UI_OUT, check for ``-i '' option. * event-top.c (display_gdb_prompt): When interpreter_p, assume interpreter displays prompt. * breakpoint.c (print_it_typical, watchpoint_check, print_one_breakpoint, mention): When MI include additional target status information. * infrun.c (print_stop_reason, normal_stop): Ditto. 2000-02-22 Jim Blandy * gdbarch.sh: Make the `default' field really default to zero, as documented. Bring COERCE_FLOAT_TO_DOUBLE under gdbarch's control. * valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be more function-like. (default_coerce_float_to_double, standard_coerce_float_to_double): New functions. (value_arg_coerce): Adjust for new definition. * value.h (default_coerce_float_to_double, standard_coerce_float_to_double): New declarations for the above. * gdbarch.sh (coerce_float_to_double): New entry, replacing macro. * gdbarch.c, gdbarch.h: Regenerated. * tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h, tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change definitions. * mips-tdep.c (mips_coerce_float_to_double): Supply our own custom function here. (mips_gdbarch_init): Install that as our coerce_float_to_double function. 2000-02-22 Kevin Buettner * ppc-linux-nat.c (supply_gregset, supply_fpregset): Add return type. * ppc-linux-tdep.c (ppc_linux_at_sigtramp_return_path): Add forward declaration. * ppc-linux-tdep.c (ppc_linux_frame_saved_pc): Handle case where the next frame is a signal handler caller. * config/powerpc/tm-linux.h (PUSH_ARGUMENTS): Remove extraneous undef. (tm-linux.h): Include. (tm-sysv4.h): Don't include (directly). config/tm-linux.h will include this file for us. (REALTIME_LO, REALTIME_HI): Don't define. These are defined by config/tm-linux.h for us. (SOFUN_ADDRESS_MAYBE_MISSING): Define. 2000-02-21 Kevin Buettner * Makefile.in (ppc-linux-nat.c, ppc-linux-tdep.c): New files. (ppc-linux-nat.o, ppc-linux-tdep.o): Add dependencies. * configure.tgt (powerpc-*-linux*): Separate from powerpc-*-eabi and like targets. * ppc-linux-nat.c, ppc-linux-tdep.c, config/powerpc/linux.mt, config/powerpc/nm-linux.h, config/powerpc/tm-linux.h: New files. * config/powerpc/xm-linux.h: Substantially revised for native port. * config/powerpc/linux.mh (NAT_FILE): Redefine to be nm-linux.h. (NATDEPFILES): Update list to reflect the fact that we can now debug natively. * rs6000-tdep.c, config/rs6000/tm-rs6000.h (rs6000_frameless_function_invocation, rs6000_frame_saved_pc): Renamed; The former names were lacking the rs6000_ prefix. * rs6000-tdep.c (rs6000_frame_saved_pc): Call FRAME_CHAIN instead of rs6000_frame_chain. (rs6000_frame_chain): Call FRAMELESS_FUNCTION_INVOCATION instead of rs6000_frameless_function_invocation. 2000-02-21 Elena Zannoni From Philippe De Muyter * event-loop.c (handle_file_event): In case of poll, enable printing of informational message if an error/exception is detected on the file descriptor. 2000-02-21 Jim Kingdon * MAINTAINERS (Misc): Clarify that yes, anyone can edit web pages. Mon Feb 21 12:50:57 2000 Andrew Cagney * buildsym.c: Include "language.h" and "expression.h" for longest_local_hex_string_custom. Mon Feb 21 11:17:18 2000 Andrew Cagney * gdbarch.sh: Include instead of . * gdbarch.c: Already updated by Wed Feb 9 18:59:16 2000 Andrew Cagney . Mon Feb 21 11:03:01 2000 Andrew Cagney * MAINTAINERS: Update: IA-64 - Kevin Buettner; ARM - Fernando nasser, Jim Ingham and Scott Bambrough; GNU/Linux ARM - Scott Bambrough; event loop - Elena Zannoni; SDS and RDI/APD protocol - to Fernando Nasser and Jim Ingham; KOD - Fernando Nasser; MI - Andrew Cagney, Elena Zannoni and Fernando Nasser; Web pages - Jim Kingdon. * MAINTAINERS: Add Nick Clifton to write after approval list. Mon Feb 21 10:30:39 2000 Andrew Cagney * MAINTAINERS: Add note on multiple maintainers. 2000-02-19 Philippe De Muyter * cli-out.c (cli_table_header): Type of parameter `alignment' is `enum ui_align', not `int'. (cli_field_string, cli_field_skip): Likewise. 2000-02-18 Jim Blandy From Jimmy Guo : * buildsym.h (add_free_pendings): Declare. * buildsym.c (add_free_pendings): New function. (make_blockvector): 32x64 fix using longest_local_hex_string(). (start_subfile): initialize variable 'subfile'. 2000-02-18 Elena Zannoni * remote.c (remote_async_detach): Use target_mourn_inferior(), to make sure that all is cleaned up after we disconnect from the target. (remote_detach): Ditto. 2000-02-17 Fernando Nasser From Rodney Brown * ui-out.c (ui_out_set_flags): Fix typo, removing warning and potentially harming mistake. 2000-02-17 Fernando Nasser * arm-tdep.c: Use header file instead of extern declarations for the {get,set}_arm_regname* functions. 2000-02-16 Fernando Nasser * configure.in: Replaces obsolete gdbtk-variable.c with gdbtk-varobj.c. * configure: Regenerate. * Makefile.in: Remove obsolete/extraneous references to gdbtk-var* files. 2000-02-16 Mark Kettenis * target.c (do_target_signal_to_host): Do not use REALTIME_LO in the conversion of the signal number. TARGET_SIGNAL_REALTIME_33 is 33 by definition, whereas REALTIME_LO might be 32 on systems that have SIG32 such as Linux. Make sure that the signal number returned is within the range specified by REALTIME_LO and REALTIME_HI. 2000-02-16 Mark Kettenis * configure: Regenerated. 2000-02-16 Fernando Nasser * arm-tdep.c (set_disassembly_flavor, arm_othernames, _initialize_arm_tdep): Allows the user to choose between any of the flavors available for the disassembly to be used in the "info reg" command and elsewhere in gdb. It prevents having to maintain this information in two places by using the data kept in the opcodes directory. 2000-02-09 Mark Kettenis * configure.in: Check for lwpid_t, psaddr_t, prgregset_t and prfpregset_t in . * config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T. * gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t, prgregset_t and prfpregset_t if they are not already present. Wed Feb 16 19:00:02 2000 Andrew Cagney From 2000-01-26 Rodney Brown : * procfs.c: Define MERGEPID if not defined. For osf4.0e. 2000-02-15 Jason Molenda (jsm@bugshack.cygnus.com) * Makefile.in (diststuff): Run 'diststuff' in doc/ subdir, not 'do-doc'. 2000-02-15 Kevin Buettner Changes for AIX 4.3: * rs6000-tdep.c (rs6000_fix_call_dummy): Set TOC register to correct value for generic dummy frames. When using generic dummy frames, don't attempt to write TOC value or function to call into the call dummy. (rs6000_push_arguments): Adapt USE_GENERIC_DUMMY_FRAMES code to also handle the PowerOpen ABI. (ppc_push_return_address): Enable for all ports. * config/powerpc/tm-ppc-aix.h (USE_GENERIC_DUMMY_FRAMES, PUSH_DUMMY_FRAME, PUSH_RETURN_ADDRESS, GET_SAVED_REGISTER, CALL_DUMMY_BREAKPOINT_OFFSET, CALL_DUMMY_LOCATION, CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET): Override defaults provided by generic RS6000 definitions so that call dummies are implemented using generic dummy frames instead. * rs6000-nat.c (store_inferior_registers): Call exec_one_dummy_insn() prior to changing the stack pointer via ptrace(). Also, ignore attempts to store to undefined registers that are less than NUM_REGS. * rs6000-tdep.c (DUMMY_FRAME_SIZE): Change size of the dummy frame from 436 to 448 to account for alignment padding. (rs6000_push_arguments): Obtain actual register size instead of assuming the register is 4 bytes long. [There's still more work to be done to totally remove the 4 byte assumption, however.] Make sure the stack is 16 byte aligned as required by the PowerOpen ABI. Also, make sure that small structures passed in registers are properly aligned within the register. 2000-02-15 Jesper Skov Patch applied by Kevin Buettner * rs6000-tdep.c (skip_prologue): skip copying of argument registers to local variable registers. 2000-02-14 Jim Kingdon * elfread.c (elf_symtab_read): Revert changes by Amit S. Kale. A sym->section->index number is not a SECT_OFF_* code. Tue Feb 15 12:07:30 2000 Andrew Cagney * MAINTAINERS (write after approval): Add H.J. Lu. 2000-02-14 Nick Clifton * sh-tdep.c: Remove extraneous code. 2000-02-14 Amit S. Kale * elfread.c (elf_symtab_read): Move the use of sym to after where it is set. Checked in by Jim Kingdon Mon Feb 14 15:39:01 2000 Andrew Cagney * MAINTAINERS: Make Nick Duffek the UnixWare threads maintainer. Mon Feb 14 15:20:26 2000 Andrew Cagney From 1999-11-24 Jason Merrill : * dwarf2read.c: (die_is_declaration): New fn. (read_structure_scope): Use it. * dwarf2read.c: (die_is_declaration): Convert to ISO-C. 2000-02-10 J.T. Conklin * config/i386/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o * configure.tgt (i[3456]86-*-netbsd*): add gdbserver to configdirs. * gdbserver/low-nbsd.c: New file. * gdbserver/Makefile.in: convert to autoconf. * gdbserver/configure.in: likewise. * gdbserver/configure: generate. Sun Feb 13 11:21:00 2000 Andrew Cagney * CONTRIBUTE: New file. How to contribute to GDB. Sun Feb 13 10:34:48 2000 Andrew Cagney * MAINTAINERS: Add Eli Zaretskii to djgpp maintiners. Add Kevin Buettner to powerpc maintainers. Make Kevin Buettner the GNU/LINUX PPC native maintainer. Add J.T. Conklin, Jim Kingdon and Jason Molenda to write after aproval list. Sun Feb 13 10:18:44 2000 Andrew Cagney * MAINTAINERS: Reformat. Separate into check-in categories. Sat Feb 12 01:08:21 EST 2000 Nicholas Duffek * uw-thread.c: Remove __FUNCTION__ GNUism. 2000-01-17 Amit S. Kale * elfread.c (elf_symtab_read): Use offset for the section in which a symbol resides, instead of .text section for calculating address of a symbol. Checked in by Jim Kingdon 2000-02-10 Mark Kettenis * gnu-nat.c: Remove hackery to include . It is no longer necessary now we have gdb_wait.h. 2000-02-09 Mark Kettenis * gnu-nat.c (proc_string): Make global. (do_mach_notify_dead_name): Suppress dead name notifications if we know that the task is dead. 1999-12-13 Mark Kettenis * gnu-nat.c (inf_validate_task_sc): Get task info via proc server instead of directly from the kernel. Add some hackery to make sure that the info isn't influenced by suspension of the task in the proc server itself. 2000-02-10 Jim Kingdon * defs.h (MERGEPID): Added. Patch submitted by Andrew Hobson and approved by Michael Snyder. 2000-02-09 Mark Kettenis * linux-thread.c: Include defs.h before gdb_wait.h. Wed Feb 9 18:59:16 2000 Andrew Cagney * Makefile.in (wait_h): Delete macro. Update all dependencies specifying gdb_wait.h instead. * ser-unix.c, ser-pipe.c, remote.c, remote-udi.c, remote-sds.c, remote-os9k.c, remote-es.c, remote-rdp.c, remote-vx960.c, remote-vx.c, remote-st.c, remote-nindy.c, remote-mm.c, convex-xdep.c, convex-tdep.c, target.c, win32-nat.c, standalone.c, remote-vxmips.c, remote-vxsparc.c, remote-vx68.c, remote-vx29k.c, remote-sim.c, remote-rdi.c, remote-mips.c, remote-eb.c, remote-e7000.c, remote-bug.c, remote-array.c, remote-adapt.c, ppc-bdm.c, ocd.c, monitor.c, m3-nat.c, linux-thread.c, infttrace.c, lin-thread.c, infptrace.c, gnu-nat.c, gdbarch.c, fork-child.c, command.c: Include "gdb_wait.h" instead of or . * nindy-share/nindy.c, nindy-share/Onindy.c: Ditto. * gdb_wait.h: New file. Based on ../include/wait.h. Include or and then define any missing WIF macros. Wed Feb 9 01:14:54 2000 Andrew Cagney * config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define. * config/d10v/tm-d10v.h (STACK_ALIGN): Define. (d10v_stack_align): Declare. * d10v-tdep.c (d10v_stack_align): Define. 1999-08-23 J.T. Conklin * top.c (remote_timeout): Change default to 2. Add comment explaining history of changes to the default value. * remote.c (_initialize_remote): Remove code that adds set/ show remotetimeout, as that's also done in top.c 1999-10-18 J.T. Conklin * m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception): Return E01 instead of P01 when 'P' command fails. 2000-02-05 J.T. Conklin * remote.c (putpkt_binary): Handle NAK from target stub. 2000-02-08 Elena Zannoni * configure.in: Remove the addition of sol-thread.c to the CONFIG_INITS list. This caused problems with init.c, because sol-thread.c would be grepped twice for _initialize_* functions. * configure: Ditto. * Makefile.in: Add FIXME for init.c. 2000-02-07 Jim Kingdon Clean up compiler warnings: * bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c, stack.c, valprint.c: Change variables to unsigned. * bcache.c: Rearrange to avoid warnings about variables not being set. * c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h rather than declaring print_max and repeat_count_threashold ourselves (incorrectly). * valprint.h: Do declare repeat_count_threashold. * ch-exp.c: Use default case for internal error. * findvar.c: Don't omit argument type. * symtab.c: Remove unused variable. 2000-02-04 Jim Blandy * c-typeprint.c (remove_qualifiers): New function. (c_type_print_base): Use it to remove qualifiers from C++ qualified names, not strrchr. * c-typeprint.c (c_type_print_base): Recognize type conversion operators by calling is_type_conversion_operator. (is_type_conversion_operator): New function. 2000-02-04 Nick Clifton * config/arm/tm-arm.h (LOWEST_PC): Define. 2000-02-04 Elena Zannoni * infrun.c (resume): Make just one call to target_resume(), instead of four: set up correct parameters in all the cases ahead of time, and do call at the end. 2000-02-04 Elena Zannoni * config/powerpc/tm-ppc-eabi.h: Define SOFUN_ADDRESS_MAYBE_MISSING. 2000-02-04 Fernando Nasser * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames (revisited). Fri Feb 4 22:42:36 2000 Andrew Cagney * Makefile.in (INIT_FILES): Append CONFIG_INITS * configure.in (CONFIG_INIT): Initialize. (links): Link srcdir/gdbtk/library to gdbtcl2. * gdbtcl2: Moved to gdbtk/library. ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c, gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c, gdbtk.h: Moved to gdbtk/generic. 2000-02-03 Elena Zannoni * printcmd.c (build_address_symbolic): New function. Returns all the parts that are necessary to print an address in a symbolic form. (print_address_symbolic): Split into a printing part and an information building part, build_address_symbolic(). * defs.h (build_address_symbolic): Export. 2000-02-03 Jim Blandy * dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx opcode. 2000-02-02 Fernando Nasser * arm-tdep.c (arm_push_arguments): Fix passing of floating point arguments on dummy frames. 2000-02-02 Fernando Nasser * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames. (arm_pop_frame): Account fr dummy frames (as opposed to real ones). 2000-02-01 Elena Zannoni * remote.c (getpkt_sane): New function. It is the old getpkt(), which now returns a timeout indication. (getpkt): New function. Wrapper for getpkt_sane(), so that return value can still be ignored. Tue Feb 1 18:47:31 2000 Andrew Cagney * top.c (print_gdb_version): Print ``UI_OUT'' when configured with UI_OUT. Tue Feb 1 00:17:12 2000 Andrew Cagney * ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c. Rename ``struct gdb_file'' to ``struct ui_file''. Delete typedef GDB_FILE. * Makefile.in: Update. * ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h, c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c, ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c, cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c, expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c, frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h, gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c, jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h, m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c, printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c, remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c, ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h, serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c, target.c, target.h, top.c, top.h, typeprint.c, typeprint.h, utils.c, v850ice.c, valprint.c, valprint.h, value.h, config/pa/tm-hppa.h: Update. * cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update. 2000-01-31 Jason Molenda (jsm@bugshack.cygnus.com) * config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh, config/i386/i386dgux.mh, config/i386/i386sol2.mh, config/i386/i386v4.mh, config/i386/i386v42mp.mh, config/i386/ncr3000.mh, config/m68k/m68kv4.mh, config/m88k/delta88v4.mh, config/mips/irix4.mh, config/mips/irix5.mh, config/mips/mipsv4.mh, config/powerpc/solaris.mh (NATDEPFILES): Change references to proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to proc-api.o, proc-events.o, proc-flags.o, and proc-why.o. Mon Jan 31 17:14:52 2000 Andrew Cagney * top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c. * main.c (captured_main): Only use the legacy tui_file code when linking in older code such as the TUI. * gdb-file.h, gdb-file.c: New files. * utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete, null_file_isatty, null_file_rewind, null_file_put, null_file_flush, null_file_write, null_file_fputs, null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty, gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered, set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind, set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs, set_gdb_file_data, struct accumulated_gdb_file, do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file): mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind, mem_file_put, mem_file_write, struct stdio_file): stdio_file_new, stdio_file_delete, stdio_file_flush, stdio_file_write, stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen): Moved to gdb-file.h and gdb-file.c. * utils.c (enum streamtype, struct tui_stream, tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty, tui_file_rewind, tui_file_put, tui_file_fputs, tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush, fputs_unfiltered_hook): Moved to tui/tui-file.c and tui/tui-file.h. * Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o. (tui-file.o, gdb-file.o): Add dependencies. (corefile.o, main.o, utils.o, simmisc.o): Update dependencies. * main.c: #include tui/tui-file.h. 2000-01-28 Fred Fish * findvar.c (value_from_register): Special case handling of D10V pointer values fetched from registers. 2000-01-28 Fernando Nasser * arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add support for new style thumb prologues. 2000-01-28 Nick Clifton * arm-tdep.c: Remove extraneous dash at start of strings introduced in previous delta. 2000-01-27 Nick Clifton * arm-tdep.c: Replace uses of arm_toggle_renames() with parse_arm_disassembler_option(). 2000-01-27 Jim Blandy * symtab.c (decode_line_1): Don't let commas that are within quotes or parenthesis terminate the line spec. Don't use pp when removing the final double quote of a double-quoted string. Don't forget to skip the opening double quote. I have no clue whether this change is correct; probably we've just moved this function from one buggy place to another buggy place, and never came within an outhouse whiff of correctness. (find_toplevel_char): New function. 2000-01-27 Fernando Nasser * arm-tdep.c (arm_push_arguments): Set the thumb mode bit when passing the pointer to a thumb function as an argument. 2000-01-27 Fernando Nasser * remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints are reinserted for another run. 2000-01-27 Fernando Nasser * cli-out.c (cli_filed_string): Test for NULL string. 2000-01-27 Fernando Nasser * infcmd.c (run_stack_dummy): Account for a random signal stopping the inferior as well as breakpoints being hit while performing an inferior function call. * valops.c (hand_function_call): Ditto. 2000-01-27 Elena Zannoni From Mark Kettenis * config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to i386_REGS_SEGS_STATE. (HAVE_I387_REGS): Define. (FLOAT_INFO): Remove. * i386gnu-nat.c: Almost completely rewritten to use new i386 register layout and `float info' implementation. * gnu-nat.c (inf_update_procs, proc_get_state, proc_string): Move prototypes from here. * gnu-nat.h: To here. 2000-01-24 Kevin Buettner * utils.c (get_field, put_field): Fix buffer underruns and overruns. Also, handle case where total_len is not evenly divisible by 8. (getfield): Make sure zeroing of unwanted bits occurs even when bit field to extract does not straddle two or more bytes. 2000-01-23 Christopher Faylor * defs.h: Add gdb_thread_select declaration. 2000-01-23 Kevin Buettner * linux-thread.c (_initialize_linuxthreads): Make sure that linuxthreads_block_mask does not block SIGCHLD. 2000-01-20 Fernando Nasser * rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to text so that new lines work properly. 2000-01-18 Elena Zannoni * proc-utils.h: New file. Export functions from proc-*.c. * proc_api.c: Rename to: * proc-api.c: New file. Add include of proc-utils.h. * proc_events.c: Rename to: * proc-events.c: New file. * proc_flags.c: Rename to: * proc-flags.c: New file. * proc_why.c: Rename to: * proc-why.c: New file. Add include of proc-utils.h. * procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h, ctype.h, proc-utils.h. (find_procinfo_or_die): Add braces to avoid ambiguous else clause. (open_procinfo_files): Conditionalize local variable tmp, to avoid compiler warnings. (proc_iterate_over_mappings): Conditionalize local vars mapfd and pathname. (procfs_wait): Adjust format in some printf_filetered calls to avoid compiler warnings. (make_signal_thread_runnable): Ifdef 0. The calls to this function are also ifdef'd 0 . (procfs_resume): Add parentheses around '&&' operation. (procfs_set_exec_trap): Remove unused variable. (info_proc_cmd): Add braces to avoid ambiguous else clause. * Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o, proc-why.o): Update dependencies. * config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to proc-*.o. 2000-01-17 Jason Molenda (jsm@bugshack.cygnus.com) * configure.in (NEW_PROC_API): Fix Unixware-matching regexp. Fix from Robert Lipe . * configure: Regenerated. 2000-01-17 Elena Zannoni * stack.c (print_frame_info_base): Break up into the frame info (location) printing part and the rest (source line printing). (print_frame): New function. Take care of printing the location information. Update copyright. * infrun.c (normal_stop): Use enum values rather than integers for the source_flag to be passed to show_and_print_stack_frame(). Update copyright. * frame.h (print_what): New enum for 'source' argument to print_frame_info_base(). Use this instead of obscure numbers. Update copyright. Sun Jan 16 17:58:00 2000 David Taylor * event-top.c (stdin_event_handler): call quit_command rather than exit -- run cleanups, give target code a chance to say goodbye to the target. Fixes bug where the inferior processes were left around on Solaris (and probably elsewhere) by the testsuite. 2000-01-14 Mark Salter * v850-tdep.c (v850_target_architecture_hook): Setup correct machine id for disassembly. 2000-01-13 Jim Blandy * i386-linux-nat.c (fill_gregset): Pass the correct arguments to convert_to_regset, when regno indicates a specific register. Thu Jan 13 23:34:17 EST 2000 Nicholas Duffek * uw-thread.c: Document libthread.so debugging interface. Minor comment and formatting tweaks. (DEBUG): #define as 0 instead of 1. (CALL_BASE): Include function name in error msg. (libthread_stub): Adjust inferior_pid after thread exit. (uw_thread_create_inferior): Deactivate uw_thread_ops before asking procfs_ops to create inferior. (libthread_init): Don't return nonlocally on error. 2000-01-12 Fernando Nasser * rdi-share/ardi.c (negotiate_params): Fix initialization of static variable. 2000-01-12 Fernando Nasser * remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure both sides are on the same state. 2000-01-12 Fernando Nasser * rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and 115200 (minor syntax mistake). 2000-01-12 Jim Blandy * config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for this here, to go along with the definitions of PIDGET and TIDGET. 2000-01-12 Elena Zannoni * thread.c (do_captured_thread_select): New function. Switch current thread, safely from within catch_errors(). (gdb_thread_select): New function. Switch threads safely. (thread_command): Use gdb_thread_select(). Include ui-out.h. (do_captured_list_thread_ids): New function. (gdb_list_thread_ids): New function. * defs.h (gdb_thread_select, gdb_list_thread_ids): Export. 2000-01-11 Christopher Faylor * configure.in: Avoid linking -limagehlp unless it's a native build. * configure: Regenerate. * thread.cc (add_thread): Clear private data pointer here or suffer strange behavior when it is checked for NULL later. 2000-01-09 Christopher Faylor * win32nat.c (handle_exceptions): Handle various arithmetic exceptions. * configure.in: Add an additional library to cygwin link. * configure: Regenerate. Patch from Egor Duda : * coffread.c (coff_symfile_read): Reinstate ability to recognize "pe" type. 2000-01-07 Michael Snyder * uw-thread.c: New file to support UnixWare user-mode threads: contributed by Nickolas Duffek . * target.h (struct target_ops): New vector, to_extra_thread_info, allows back-ends to give extra details in info thread display. (target_extra_thread_info): define new macro. (target_find_new_threads): simplify macro. Cleanup comments. * target.c (to_extra_thread_info): default and inherit new vector. (cleanup_target): eliminate PARAMS, break up long lines, provide default definition for to_extra_thread_info, and to_find_new_threads. Default to_thread_alive and to_query to return_zero, not target_ignore (they each return int not void). (debug_to_find_new_threads): new debug entry. (setup_target_debug): add debug_to_find_new_threads. * gdbthread.h: export struct thread_info, find_thread_pid, and iterate_over_threads. Add comments. Eliminate PARAMS. Update copyright. Add new private data pointer for use by target back-ends. * thread.c (struct thread_info): move definition to gdbthread.h. (find_thread_pid): new exported function for thread lookup. (iterate_over_threads): new exported function for applying arbitrary operations to threads. Update copyright to 2000. (info_threads_command): use new target_extra_thread_info vector to display extra information about each thread (if implemented). * config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs. Add defines for PIDGET, etc. * config/i386/tm-i386sol2.h: ditto. * config/sparc/tm-sun4sol2.h: ditto. * config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES. * testsuite/gdb.threads/pthreads.exp: Try to link with -lthread if -lpthread and -lpthreads fail. * procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op. (proc_flags): combine flags that UnixWare splits into two locations. (proc_modify_flag): add support for PR_KLC (kill on last close). (proc_[un]set_kill_on_last_close): new functions. 2000-01-07 Elena Zannoni * infrun.c (normal_stop): Print out thread id when we stop. 2000-01-06 Fernando Nasser * remote.c (remote_open_1): Fix message so it does not imply a specific syntax for serial ports, as it is OS dependent. (remote_async_open_1): Ibid. (init_remote_ops): Ibid. 2000-01-06 Fernando Nasser * rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or "set remotebaud" command (if set) when no speed is specified on the "target rdi" command. 2000-01-06 Fernando Nasser * rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and 115200. (baud_options[]): Ibid. 2000-01-06 Fernando Nasser * rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix used by each operating system. 2000-01-06 Elena Zannoni * breakpoint.c (until_break_command): Add an argument for the continuation, the beginning of the cleanups set up by this command. (until_break_command_continuation): Do cleanups until the one passed in as argument instead of doing all of them. * infcmd.c (finish_command_continuation): Expect a new argument, which indicates up to where to do cleanups. Update calls to do_exec_cleanups to use this marker, instead of ALL_CLEANUPS. (finish_command): Add another argument for the continuation: the starting cleanup for this command. 2000-01-05 Fernando Nasser From Grant Edwards (original patch from Thomas Zenker ): * rdi-share/ardi.c: Allow interruption of interruptible targets with a . 2000-01-04 Fernando Nasser * rdi-share/etherdrv.c (fetch_ports): Send extra words on request to control port to accommodate some versions of Angel. 2000-01-04 Fernando Nasser * rdi-share/devsw.c (dumpPacket): Fix source of channel information. Add interpretation for C Support Library packets. 2000-01-04 Fernando Nasser * rdi-share/devsw.c (DevSW_Close): Remove const from argument that is now being modified. * rdi-share/devsw.h: Adjust declaration of the above funtion. For older changes see ChangeLog-99 Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never End: