2014-02-04 Ulrich Weigand  * ppc-tdep.h (enum powerpc_elf_abi): New data type. (struct gdbarch_tdep): New member elf_abi. * rs6000-tdep.c: Include "elf/ppc64.h". (rs6000_gdbarch_init): Detect ELF ABI version. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order within a register pair holding a DFP 128-bit value on little-endian. (ppc64_sysv_abi_return_value_base): Likewise. * rs6000-tdep.c (dfp_pseudo_register_read): Likewise. (dfp_pseudo_register_write): Likewise. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct offset on little-endian when passing _Decimal32. (ppc64_sysv_abi_return_value_base): Likewise for return values. 2014-02-04 Ulrich Weigand  * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset of the overlapped FP register within the VSX register on little- endian platforms. (efpr_pseudo_register_write): Likewise. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct offset on little-endian when passing small structures. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment. (struct ppc64_sysv_argpos): New data structure. (ppc64_sysv_abi_push_float): Remove. (ppc64_sysv_abi_push_val): New function. (ppc64_sysv_abi_push_integer): Likewise. (ppc64_sysv_abi_push_freg): Likewise. (ppc64_sysv_abi_push_vreg): Likewise. (ppc64_sysv_abi_push_param): Likewise. (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines. (ppc64_sysv_abi_return_value_base): New function. (ppc64_sysv_abi_return_value): Refactor to use it. 2014-02-04 Ulrich Weigand  * NEWS: Document new target powerpc64le-*-linux*. 2014-02-04 Mark Kettenis * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable. (sparc64obsd_supply_gregset): Handle registers sets used in ELF core dumps. (sparc64obsd_init_abi): Adjust minimum size of the general purpose register set used in ELF core dumps. Add floating-point register set. 2014-02-03 Kevin Buettner * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite dwarf2_to_gdb[] table using symbolic constants. Adjust penultimate entry from number representing the PC register to symbolic constant representing the MDR register. Add constant for the PC register to the end of the table. 2014-02-03 Mark Kettenis * bsd-kvm.c: Include 2014-02-03 Mark Kettenis * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype. 2014-01-31 Joel Brobecker * ada-lang.h (clear_ada_sym_cache): Delete. 2014-01-30 Ulrich Weigand  * auxv.c (fprint_target_auxv): Handle AT_HWCAP2. 2014-01-29 Jose E. Marchesi * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from the sigreturn register save area only if the syscall is sigreturn. 2014-01-29 Joel Brobecker * valops.c (value_slice): Minor reformatting. 2014-01-28 Ulrich Weigand  * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo. 2014-01-28 Joel Brobecker * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist): New static globals. (maint_set_ada_cmd, maint_show_ada_cmd): New functions. (ada_ignore_descriptive_types_p): New static global. (find_parallel_type_by_descriptive_type): Return immediately if ada_ignore_descriptive_types_p is set. (_initialize_ada_language): Register new commands "maintenance set ada", "maintenance show ada", "maintenance set ada ignore-descriptive-types" and "maintenance show ada ignore-descriptive-types". * NEWS: Add entry for new "maint ada set/show ignore-descriptive-types" commands. 2014-01-27 Markus Metzger * record-btrace.c (record_btrace_close): Call btrace_teardown for all threads. 2014-01-27 Joel Brobecker * ada-lang.c: Remove "#ifdef UI_OUT" condition for including "ui-out.h". 2014-01-27 Joel Brobecker * ada-typeprint (type_is_full_subrange_of_target_type): New function. (print_range): Add parameter bounds_prefered_p. If not set, try printing range types using the name of their base type. (print_range_type): Add parameter bounds_prefered_p. Use it in call to print_range. (print_array_type, ada_print_type): Update calls to print_range and print_range_type. 2014-01-27 Joel Brobecker * ada-typeprint.c (print_array_type, print_choices, print_range) (print_range_bound, print_dynamic_range_bound, print_range_type): Remove declaration. 2014-01-27 Joel Brobecker * ada-typeprint.c (print_range): Add missing empty line after local declaration. 2014-01-27 Joel Brobecker * ada-valprint.c (print_optional_low_bound): Get index_type's target type for as long as it is a TYPE_CODE_RANGE. 2014-01-27 Joel Brobecker * procfs.c (procfs_make_note_section): Remove assertion and associated comment. 2014-01-24 Yao Qi * remote.c (remote_read_bytes): Change type of len to ULONGEST. * corelow.c (get_core_siginfo): Likewise. 2014-01-24 Yao Qi * remote.c (remote_write_bytes_aux): Change type of 'len' to ULONGEST. Don't check 'len' is negative. (remote_write_bytes): Change type of 'len' to ULONGEST. 2014-01-23 Tom Tromey PR python/16485: * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args): Handle exception from frame.block. (FrameVars.fetch_frame_locals): Likewise. 2014-01-23 Tom Tromey PR python/16487: * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF on a NULL pointer. Move "goto error" to correct place. 2014-01-23 Tom Tromey PR python/16491: * python/py-framefilter.c (apply_frame_filter): Call ensure_python_env after computing gdbarch. 2014-01-23 Yao Qi * target.c (raw_memory_xfer_partial): Change argument type from void * to gdb_byte *. (memory_xfer_partial_1, memory_xfer_partial): Likewise. 2014-01-22 Doug Evans New gdbserver option --debug-format=timestamp. * NEWS: Mention it. 2014-01-22 Andreas Arnez * syscalls/s390x-linux.xml: New file. * syscalls/s390-linux.xml: New file. * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro. (XML_SYSCALL_FILENAME_S390X): Likewise. (op_svc): New enum value for SVC opcode. (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'. (s390_linux_get_syscall_number): New function. (s390_gdbarch_init): Register '*get_syscall_number' and the syscall xml file name. * data-directory/Makefile.in (SYSCALLS_FILES): Add "s390-linux.xml" and "s390x-linux.xml". * NEWS: Announce new feature. 2014-01-22 Baruch Siach * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t. 2014-01-22 Pedro Alves * xtensa-config.c: Include defs.h. 2014-01-22 Joel Brobecker * common/common-utils.h: Add "ARI:" comment beside __func__ reference. 2014-01-22 Joel Brobecker * common/common-utils.h (FUNCTION_NAME): Expand the macro's documentation a bit. 2014-01-21 Roland McGrath * configure.ac: Call AM_PROG_INSTALL_STRIP. * configure: Regenerate. * aclocal.m4: Regenerate. * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP): New substituted variables. (install-strip): New target. (INSTALL_SCRIPT): New substituted variable. (FLAGS_TO_PASS): Add it. (install-only): Use $(INSTALL_SCRIPT) rather than $(INSTALL_PROGRAM) for gcore. 2014-01-20 Tom Tromey * cli/cli-decode.h (struct cmd_list_element): Move all bitfields together. 2014-01-20 Tom Tromey * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd) (add_setshow_cmd_full, delete_cmd, lookup_cmd_1) (deprecated_cmd_warning, complete_on_cmdlist): Update. * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER) (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove. (struct cmd_list_element) : Remove. : New fields. : Now bitfields. * maint.c (maintenance_do_deprecate): Update. * top.c (execute_command): Update. 2014-01-20 Baruch Siach * xtensa-linux-nat.c: Include asm/ptrace.h. 2014-01-17 Iain Buclaw * Makefile.in (SFILES): Add d-support.c. (COMMON_OBS): Add d-support.o. * d-lang.h (d_parse_symbol): Add comment, now defined in d-support.c. * d-lang.c (parse_call_convention) (parse_attributes, parse_function_types) (parse_function_args, parse_type, parse_identifier) (call_convention_p, d_parse_symbol): Move functions to ... * d-support.c: ... New file. 2014-01-17 Iain Buclaw * d-lang.h (d_parse_symbol): Add declaration. * d-lang.c (extract_identifiers) (extract_type_info): Remove functions. (parse_call_convention, parse_attributes) (parse_function_types, parse_function_args) (parse_type, parse_identifier, call_convention_p) (d_parse_symbol): New functions. (d_demangle): Use d_parse_symbol to demangle D symbols. 2014-01-17 Iain Buclaw * d-lang.h (struct builtin_d_type): New data type. (builtin_d_type): Add declaration. * d-lang.c (d_language_arch_info, build_d_types) (builtin_d_type): New functions. (enum d_primitive_types): New data type. (d_language_defn): Change c_language_arch_info to d_language_arch_info. (d_type_data): New static variable. (_initialize_d_language): Initialize d_type_data. 2014-01-17 Iain Buclaw * d-lang.h (d_main_name): Add declaration. * d-lang.c (d_main_name): New function. * symtab.c (find_main_name): Add call to d_main_name. 2014-01-17 Iain Buclaw * d-lang.c (d_language_defn): Change macro_expansion_c to macro_expansion_no. 2014-01-17 Iain Buclaw * MAINTAINERS: Add myself as a write-after-approval maintainer. 2014-01-17 Sergio Durigan Junior * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct gdb_exception" declaration. * remote.c (getpkt_or_notif_sane): Likewise. 2014-01-17 Doug Evans * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New function, contents of dirnames_to_char_ptr_vec_append moved here. (delim_string_to_char_ptr_vec): New function. (dirnames_to_char_ptr_vec_append): Rewrite. * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare. 2014-01-17 Doug Evans * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION, and moved here ... * common/gdb_assert.h (ASSERT_FUNCTION): ... from here. #include "common-utils.h". (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update. * common/vec.h (VEC_ASSERT_PASS): Update. * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h. (MACH_CHECK_ERROR): Update. 2014-01-17 Simon Marchi * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add comments. * gdbarch.h: Regenerate. 2014-01-16 Tom Tromey * value.c (struct value) : Move earlier. 2014-01-16 Tom Tromey * remote.c (extended_remote_create_inferior): Rename from extended_remote_create_inferior_1. Add "ops" argument. Remove old implementation. 2014-01-16 Pedro Alves * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow NOT_AVAILABLE_ERROR errors while parsing the prologue or reading the backchain. 2014-01-16 Doug Evans * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment. 2014-01-16 Markus Metzger * btrace.h (btrace_thread_flag): New. (struct btrace_thread_info) : New. * record-btrace.c (record_btrace_resume_thread) (record_btrace_find_thread_to_move, btrace_step_no_history) (btrace_step_stopped, record_btrace_start_replaying) (record_btrace_step_thread, record_btrace_decr_pc_after_break) (record_btrace_find_resume_thread): New. (record_btrace_resume, record_btrace_wait): Extend. (record_btrace_can_execute_reverse): New. (record_btrace_open): Fail in non-stop mode. (record_btrace_set_replay): Split into this, ... (record_btrace_stop_replaying): ... this, ... (record_btrace_clear_histories): ... and this. (init_record_btrace_ops): Init to_can_execute_reverse. * NEWS: Announce it. 2014-01-16 Markus Metzger * target.h (struct target_ops) : New. (forward_target_decr_pc_after_break) (target_decr_pc_after_break): New. * target.c (forward_target_decr_pc_after_break) (target_decr_pc_after_break): New. * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * linux-thread-db.c (check_event): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * record-full.c (record_full_wait_1): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. 2014-01-16 Markus Metzger * btrace.c: Include regcache.h. (btrace_add_pc): New. (btrace_enable): Call btrace_add_pc. (btrace_is_empty): New. * btrace.h (btrace_is_empty): New. * record-btrace.c (require_btrace, record_btrace_info): Call btrace_is_empty. 2014-01-16 Markus Metzger * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace): Support delta reads. (linux_disable_btrace): Change return type. * common/linux-btrace.h (linux_read_btrace): Change parameters and return type to allow error reporting. Update users. (linux_disable_btrace): Change return type. Update users. * common/btrace-common.h (btrace_read_type) : New. (btrace_error): New. (btrace_block) : Comment on BEGIN == 0. * btrace.c (btrace_compute_ftrace): Start from the end of the current trace. (btrace_stitch_trace, btrace_clear_history): New. (btrace_fetch): Read delta trace, return if replaying. (btrace_clear): Move clear history code to btrace_clear_history. (parse_xml_btrace): Throw an error if parsing failed. * target.h (struct target_ops) : Change parameters and return type to allow error reporting. (target_read_btrace): Change parameters and return type to allow error reporting. * target.c (target_read_btrace): Update. * remote.c (remote_read_btrace): Support delta reads. Pass errors on. * NEWS: Announce it. 2014-01-16 Markus Metzger * record.h (record_btrace_frame_unwind) (record_btrace_tailcall_frame_unwind): New declarations. * dwarf2-frame: Include record.h (dwarf2_frame_cfa): Throw an error for btrace frames. * record-btrace.c: Include hashtab.h. (btrace_get_bfun_name): New. (btrace_call_history): Call btrace_get_bfun_name. (struct btrace_frame_cache): New. (bfcache): New. (bfcache_hash, bfcache_eq, bfcache_new): New. (btrace_get_frame_function): New. (record_btrace_frame_unwind_stop_reason): Allow unwinding. (record_btrace_frame_this_id): Compute own id. (record_btrace_frame_prev_register): Provide PC, throw_error for all other registers. (record_btrace_frame_sniffer): Detect btrace frames. (record_btrace_tailcall_frame_sniffer): New. (record_btrace_frame_dealloc_cache): New. (record_btrace_frame_unwind): Add new functions. (record_btrace_tailcall_frame_unwind): New. (_initialize_record_btrace): Allocate cache. * btrace.c (btrace_clear): Call reinit_frame_cache. * NEWS: Announce it. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_set_replay) (record_btrace_goto_begin, record_btrace_goto_end) (record_btrace_goto): New. (init_record_btrace_ops): Initialize them. * NEWS: Announce it. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_find_new_threads) (record_btrace_thread_alive): New. (init_record_btrace_ops): Initialize to_find_new_threads and to_thread_alive. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_resume): New. (record_btrace_wait): New. (init_record_btrace_ops): Initialize to_wait and to_resume. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_xfer_partial) (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint) (record_btrace_allow_memory_access): New. (init_record_btrace_ops): Initialize new methods. * target.c (raw_memory_xfer_partial): Bail out if target reports that this memory is not available. 2014-01-16 Markus Metzger * target.h (target_ops) : Add target_ops parameter. (forward_target_insert_breakpoint): New. (forward_target_remove_breakpoint): New. (memory_remove_breakpoint, memory_insert_breakpoint): Add target_ops parameter. * target.c (target_insert_breakpoint): Split into this and ... (forward_target_insert_breakpoint): ... this. (target_remove_breakpoint): Split into this and ... (forward_target_remove_breakpoint): ... this. (debug_to_insert_breakpoint): Add target_ops parameter. Call forward_target_insert_breakpoint. (debug_to_remove_breakpoint): Add target_ops parameter. Call forward_target_remove_breakpoint. (update_current_target): Do not inherit or default to_insert_breakpoint and to_remove_breakpoint. * corelow.c (ignore): Add target_ops parameter. * exec.c (ignore): Add target_ops parameter. * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint): Add target_ops parameter. * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint): Add target_ops parameter. * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint): Add target_ops parameter. * record-full.c (record_full_beneath_to_insert_breakpoint) (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint) (tmp_to_remove_breakpoint, record_full_insert_breakpoint) (record_full_remove_breakpoint, record_full_core_insert_breakpoint) (record_full_core_remove_breakpoint): Add target_ops parameter. Update users. (record_full_beneath_to_insert_breakpoint_ops) (record_full_beneath_to_remove_breakpoint_ops) (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New. (record_full_open): Initialize tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops, record_full_beneath_to_insert_breakpoint_ops, and record_full_beneath_to_remove_breakpoint_ops. * remote-m32r-sdi.c (m32r_insert_breakpoint) (m32r_remove_breakpoint): Add target_ops parameter. * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint): Add target_ops parameter. * remote.c (remote_insert_breakpoint, remote_remove_breakpoint): Add target_ops parameter. 2014-01-16 Jan Kratochvil Markus Metzger * record-btrace.c: Include frame-unwind.h. (record_btrace_frame_unwind_stop_reason) (record_btrace_frame_this_id, record_btrace_frame_prev_register) (record_btrace_frame_sniffer, record_btrace_frame_unwind): New. (init_record_btrace_ops): Install it. 2014-01-16 Jan Kratochvil * frame.c (get_frame_unwind_stop_reason): Unconditionally call get_prev_frame_1. 2014-01-16 Jan Kratochvil * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check earlier. 2014-01-16 Jan Kratochvil * frame-unwind.c: Include target.h. (frame_unwind_try_unwinder): New function with code from ... (frame_unwind_find_by_frame): ... here. New variable unwinder_from_target, call also target_get_unwinder) (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it. * target.c (target_get_unwinder, target_get_tailcall_unwinder): New. * target.h (struct target_ops): New fields to_get_unwinder and to_get_tailcall_unwinder. (target_get_unwinder, target_get_tailcall_unwinder): New declarations. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_fetch_registers) (record_btrace_store_registers) (record_btrace_to_prepare_to_store): New. (init_record_btrace_ops): Add the above. 2014-01-16 Tom Tromey * windows-nat.c (windows_prepare_to_store): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_prepare_to_store): Add argument. * target.c (debug_to_prepare_to_store): Add argument. (update_current_target): Update. * remote.c (remote_prepare_to_store): Add 'self' argument. * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument. * remote-mips.c (mips_prepare_to_store): Add 'self' argument. * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument. * record-full.c (record_full_core_prepare_to_store): Add 'self' argument. * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument. * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument. * monitor.c (monitor_prepare_to_store): Add 'self' argument. * inf-child.c (inf_child_prepare_to_store): Add 'self' argument. * go32-nat.c (go32_prepare_to_store): Add 'self' argument. 2014-01-16 Markus Metzger * btrace.h (replay) : New. (btrace_is_replaying): New. * btrace.c (btrace_clear): Free replay iterator. (btrace_is_replaying): New. * record-btrace.c (record_btrace_is_replaying): New. (record_btrace_info): Print insn number if replaying. (record_btrace_insn_history): Start at replay position. (record_btrace_call_history): Start at replay position. (init_record_btrace_ops): Init to_record_is_replaying. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_insn_history_range): Include end. (record_btrace_insn_history_from): Adjust range. (record_btrace_call_history_range): Include end. (record_btrace_call_history_from): Adjust range. * NEWS: Announce changes. 2014-01-16 Markus Metzger * record.h (enum record_print_flag) : New. * record.c (get_call_history_modifiers): Recognize /c modifier. (_initialize_record): Document /c modifier. * record-btrace.c (btrace_call_history): Add btinfo parameter. Reorder fields. Optionally indent the function name. Update all users. * NEWS: Announce changes. 2014-01-16 Markus Metzger * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer. 2014-01-16 Markus Metzger * btrace.c (ftrace_new_function): Start counting at one. * record-btrace.c (record_btrace_info): Adjust number of calls and insns. * NEWS: Announce it. 2014-01-16 Markus Metzger * record-btrace.c (btrace_call_history_insn_range): Print insn range as [begin, end]. 2014-01-16 Markus Metzger * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) : Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) : New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) : Remove. (struct btrace_target_info) : New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. 2014-01-16 Markus Metzger * frame.h (frame_id_build_unavailable_stack_special): New. * frame.c (frame_id_build_unavailable_stack_special): New. 2014-01-16 Markus Metzger * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call) (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New. (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump to gdbarch. * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret) (i386_insn_is_jump, i386_jmp_p): New. (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and insn_is_jump to gdbarch. * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New. * gdbarch.h: Regenerated. * gdbarch.c: Regenerated. * arch-utils.h (default_insn_is_call, default_insn_is_ret) (default_insn_is_jump): New. * arch-utils.c (default_insn_is_call, default_insn_is_ret) (default_insn_is_jump): New. 2014-01-16 Markus Metzger * common/btrace-common.h (btrace_read_type) : Change to ... (btrace_read_type) : ... this. Update users. (btrace_read_type) : Change to ... (btrace_read_type) : ... this. Update users. 2014-01-16 Markus Metzger * common/linux-btrace.c (linux_read_btrace): Free trace from previous iteration. 2014-01-15 Doug Evans * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print uint32_t. 2014-01-15 Tom Tromey * dbxread.c (process_one_symbol): Use set_objfile_main_name. * dwarf2read.c (read_partial_die): Use set_objfile_main_name. * objfiles.c (get_objfile_bfd_data): Initialize language_of_main. (set_objfile_main_name): New function. * objfiles.h (struct objfile_per_bfd_storage) : New fields. (set_objfile_main_name): Declare. * symtab.c (find_main_name): Loop over objfiles to find the main name and language. (set_main_name): Now static. (get_main_info): Add comment. * symtab.h (set_main_name): Don't declare. 2014-01-15 Tom Tromey * symtab.c (main_progspace_key): New global. (struct main_info): New. (name_of_main, language_of_main): Remove. (get_main_info, main_info_cleanup): New function. (set_main_name, main_name, main_language): Use get_main_info. (_initialize_symtab): Initialize main_progspace_key. 2014-01-15 Tom Tromey * dbxread.c (process_one_symbol): Update. * dwarf2read.c (read_partial_die): Update. * symfile.c (set_initial_language): Call main_language. * symtab.c (language_of_main): Now static. (set_main_name): Add 'lang' parameter. (find_main_name): Update. (main_language): New function. (symtab_observer_executable_changed): Update. * symtab.h (set_main_name): Update. (language_of_main): Remove. (main_language): Declare. 2014-01-15 Tom Tromey * symfile.c (init_entry_point_info): Use new "initialized" field. Update. * objfiles.h (struct entry_point) : New field. (struct objfile_per_bfd_storage) : New field, moved from... (struct objfile) : ...here. Remove. * objfiles.c (entry_point_address_query): Update. 2014-01-15 Tom Tromey * objfiles.c (entry_point_address_query): Relocate entry point address. (objfile_relocate1): Do not relocate entry point address. * objfiles.h (struct entry_info) : Update comment. : New field. * symfile.c (init_entry_point_info): Find the entry point's section. 2014-01-15 Tom Tromey * solib-frv.c (enable_break): Use entry_point_address_query. 2014-01-15 Omair Javaid * NEWS: Add note on improved process record-replay on arm*-linux* targets. 2014-01-15 Omair Javaid * arm-tdep.c (enum arm_record_result): New enum. (arm_record_unsupported_insn): New function. (arm_record_coproc_data_proc): Removed. (thumb2_record_ld_st_multiple): New function. (thumb2_record_ld_st_dual_ex_tbb): New function. (thumb2_record_data_proc_sreg_mimm): New function. (thumb2_record_ps_dest_generic): New function. (thumb2_record_branch_misc_cntrl): New function. (thumb2_record_str_single_data): New function. (thumb2_record_ld_mem_hints): New function. (thumb2_record_ld_word): New function. (thumb2_record_lmul_lmla_div): New function. (thumb2_record_decode_insn_handler): New function. (decode_insn): Add thumb32 instruction handlers. 2014-01-15 Omair Javaid * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h". (struct arm_linux_record_tdep): Declare. (arm_canonicalize_syscall): New function. (arm_all_but_pc_registers_record): New function. (arm_linux_syscall_record): New function. (arm_linux_init_abi): Add syscall recording constructs. * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall decoding. (arm_record_coproc_data_proc): Update arm syscall decoding. * arm-tdep.h (struct gdbarch_tdep) : Remove. : New field. * configure.tgt (arm*-*-linux*): Add linux-record.o to gdb_target_obs. 2014-01-15 Omair Javaid * arm-tdep.c (thumb_record_misc): Update to use sp as base register for push instruction recording. 2014-01-15 Omair Javaid * arm-tdep.c (thumb_record_misc): Update to correct logical error while recording ldm, ldmia and pop instructions. 2014-01-15 Omair Javaid * arm-tdep.c (struct arm_mem_r) : Change type to uint32_t. 2014-01-15 Pedro Alves * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach) (go32_resume, go32_fetch_registers, store_register) (go32_store_registers, go32_prepare_to_store) (go32_xfer_memory, go32_files_info, go32_kill_inferior) (go32_create_inferior, go32_can_run, go32_terminal_init) (go32_terminal_inferior, go32_terminal_ours): Delete forward declarations. 2014-01-15 Tom Tromey * target.h (async_callback_ftype): New typedef. (struct target_ops) : Use it. 2014-01-15 Joel Brobecker * python/py-value.c (get_field_type): Remove unnecessary curly braces for single-statement if block. 2014-01-15 Joel Brobecker * python/py-type.c (convert_field): Add missing empty line after declarations. 2014-01-14 Doug Evans * symfile.h (expand_symtabs_matching): Renamed from expand_partial_symbol_names. Update prototype. (map_symbol_filenames): Renamed from map_partial_symbol_filenames. * symfile.c (expand_symtabs_matching): Renamed from expand_partial_symbol_names. New args file_matcher, kind. Rename arg fun to symbol_matcher. (map_symbol_filenames): Renamed from map_partial_symbol_filenames. * ada-lang.c (ada_complete_symbol_matcher): Renamed from ada_expand_partial_symbol_name. (ada_make_symbol_completion_list): Update to call expand_symtabs_matching. (ada_add_global_exceptions): Call expand_symtabs_matching. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to call map_symbol_filenames. * symtab.c (sources_info): Update to call map_symbol_filenames. (search_symbols): Call expand_symtabs_matching. (symbol_completion_matcher): Renamed from expand_partial_symbol_name. (default_make_symbol_completion_list_break_on): Update to call expand_symtabs_matching. (make_source_files_completion_list): Update to call map_symbol_filenames. 2014-01-14 Doug Evans * symfile.h (expand_symtabs_file_matcher_ftype): New typedef. (expand_symtabs_symbol_matcher_ftype): New typedef. (quick_symbol_functions.expand_symtabs_matching): Update to use. expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype. * symfile.c (expand_partial_symbol_names): Update to use expand_symtabs_symbol_matcher_ftype. * dwarf2read.c (dw2_expand_symtabs_matching): Update to use expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to symbol_matcher. * psymtab.c (recursively_search_psymtabs): Update to use expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to sym_matcher. (expand_symtabs_matching_via_partial): Update to use expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to symbol_matcher. 2014-01-14 Doug Evans * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c. (map_partial_symbol_filenames): Ditto. * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h. (map_partial_symbol_filenames): Ditto. * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c. (map_partial_symbol_filenames): Ditto. * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h. (map_partial_symbol_filenames): Ditto. * symtab.c: Delete #include "psymtab.h". 2014-01-14 Pedro Alves Tom Tromey * infrun.c (use_displaced_stepping): Use find_record_target instead of RECORD_IS_USED. (adjust_pc_after_break): Use record_full_is_used instead of RECORD_IS_USED. * record-btrace.c (record_btrace_open): Call record_preopen instead of checking RECORD_IS_USED. * record-full.c (record_full_shortname) (record_full_core_shortname): New globals. (record_full_is_used): New function. (find_full_open): Call record_preopen instead of checking RECORD_IS_USED. (init_record_full_ops): Set the target's shortname to record_full_shortname. (init_record_full_core_ops): Set the target's shortname to record_full_core_shortname. * record-full.h (record_full_is_used): Declare. * record.c (find_record_target): Make extern. (record_preopen): New function. * record.h (RECORD_IS_USED): Delete macro. (find_record_target, record_preopen): Declare functions. 2014-01-14 Yao Qi * gdbarch.sh (core_xfer_shared_libraries): Change its argument 'len''s type to ULONGEST. (core_xfer_shared_libraries_aix): Likewise. * gdbarch.c, gdbarch.h: Regenerated. * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Change type of 'len' to ULONGEST. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. 2014-01-14 Yao Qi * common/linux-osdata.c (linux_xfer_osdata_processes): Change type of 'len' to ULONGEST. (linux_xfer_osdata_processgroups): Likewise. (linux_xfer_osdata_threads): Likewise. (linux_xfer_osdata_fds): Likewise. (linux_xfer_osdata_isockets): Likewise. (linux_xfer_osdata_shm): Likewise. (linux_xfer_osdata_sem): Likewise. (linux_xfer_osdata_msg): Likewise. (linux_common_xfer_osdata): Likewise. (struct osdata_type) : Likewise. * common/linux-osdata.h (linux_common_xfer_osdata): Update the declaration. 2014-01-14 Yao Qi * target.h (target_xfer_partial_ftype): Update. (struct target_ops) : Change 'len' type to ULONGEST. * aix-thread.c (aix_thread_xfer_partial): Change type of argument 'len' to ULONGEST. * auxv.c (procfs_xfer_auxv): Likewise. (ld_so_xfer_auxv): Likewise. (memory_xfer_auxv): Likewise. * bfd-target.c (target_bfd_xfer_partial): Likewise. * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise. * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise. * corelow.c (core_xfer_partial): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * darwin-nat.c (darwin_read_write_inferior): Likewise. Use '%u'. (darwin_read_dyld_info): Likewise. (darwin_xfer_partial): Likewise. * exec.c (section_table_xfer_memory_partial): Likewise. (exec_xfer_partial): Likewise. * exec.h (section_table_xfer_memory_partial): Update declaration. * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest instead of plongest. (gnu_xfer_partial): Likewise. * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise. (ia64_hpux_xfer_solib_got): Likewise. (ia64_hpux_xfer_partial): Likewise. * ia64-linux-nat.c (ia64_linux_xfer_partial): * inf-ptrace.c (inf_ptrace_xfer_partial): * inf-ttrace.c (inf_ttrace_xfer_partial): * linux-nat.c (linux_xfer_siginfo): Likewise. (linux_nat_xfer_partial): Likewise. (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise. (linux_nat_xfer_osdata, linux_xfer_partial): Likewise. * monitor.c (monitor_xfer_memory): Likewise. (monitor_xfer_partial): Likewise. * procfs.c (procfs_xfer_partial): Likewise. * record-full.c (record_full_xfer_partial): Likewise. (record_full_core_xfer_partial): Likewise. * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest instead of plongest. (gdbsim_xfer_partial): Likewise. * remote.c (remote_xfer_partial): Likewise. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update declaration. * rs6000-nat.c (rs6000_xfer_partial): Likewise. (rs6000_xfer_shared_libraries): Likewise. * sol-thread.c (sol_thread_xfer_partial): Likewise. * sparc-nat.c (sparc_xfer_wcookie): Likewise. (sparc_xfer_partial): Likewise. * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. (spu_xfer_partial): Likewise. * spu-multiarch.c (spu_xfer_partial): Likewise. * target.c (target_read_live_memory): Likewise. (memory_xfer_live_readonly_partial): Likewise. (memory_xfer_partial, memory_xfer_partial_1): Likewise. (target_xfer_partial, default_xfer_partial): Likewise. (current_xfer_partial): Likewise. * tracepoint.c (tfile_xfer_partial): Likewise. * windows-nat.c (windows_xfer_memory): Likewise. Call pulongest instead of plongest. (windows_xfer_partial): Likewise. (windows_xfer_shared_libraries): Likewise. 2014-01-14 Yao Qi * rs6000-nat.c (rs6000_xfer_shared_libraries): Use target_xfer_partial_ftype. 2014-01-13 Siva Chandra Reddy PR python/15464 PR python/16113 * valops.c (value_struct_elt_bitpos): New function * py-type.c (convert_field): Set 'name' attribute of a gdb.Field object to 'None' if the field name is an empty string (""). * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type' attribute to look for a field when 'name' is 'None'. (get_field_type): New function 2014-01-13 Doug Evans PR symtab/16426 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion. (try_open_dwop_file): Ditto. * gdb_bfd.c: #include "vec.h". (bfdp): New typedef. (struct gdb_bfd_data): New member included_bfds. (gdb_bfd_unref): Unref all included bfds. (gdb_bfd_record_inclusion): New function. * gdb_bfd.h (gdb_bfd_record_inclusion): Declare. 2014-01-13 Tom Tromey * gdbcore.h (deprecated_core_resize_section_table): Remove. 2014-01-13 Tom Tromey * defs.h (use_windows): Remove. * gdb.c (main): Update. * main.c (captured_main, gdb_main): Update. * main.h (struct captured_main_args) : Remove. * top.c (use_windows): Remove. 2014-01-13 Tom Tromey * defs.h (deprecated_flush_hook): Remove. 2014-01-13 Jan Kratochvil PR threads/16216 * linux-thread-db.c (try_thread_db_load): Add parameter check_auto_load_safe. Move here the file_is_auto_load_safe call. (try_thread_db_load_from_pdir_1): Move it there from here. (try_thread_db_load_from_sdir): Update caller. (try_thread_db_load_from_dir): Move it there from here. 2014-01-13 Patrick Palka * regformats/regdat.sh: Always rewrite the register file. 2014-01-13 Pedro Alves * Makefile.in (CHECK_HEADERS): New variable. (check-headers:): New rule. 2014-01-13 Tom Tromey * cli/cli-setshow.c (do_set_command): Update. * defs.h (deprecated_set_hook): Remove. * top.c (deprecated_set_hook): Remove. 2014-01-13 Pedro Alves * tracepoint.c (tfile_fetch_registers): Don't infer the PC from the tracepoint if the PC is a pseudo-register. 2014-01-13 Tom Tromey * defs.h (XCALLOC): Remove. * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC. (print_bcache_statistics): Use XCNEWVEC, not XCALLOC. * dwarf2loc.c (allocate_piece_closure): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_symfile_segments): Likewise. * gdbtypes.c (copy_type_recursive): Likewise. * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC. * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC. * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not XCALLOC. * mt-tdep.c (mt_gdbarch_init): Likewise. * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not XCALLOC. * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC. * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC. * registry.c (registry_alloc_data): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * serial.c (serial_fdopen_ops): Likewise. * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not XCALLOC. * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC. * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC, not XCALLOC. 2014-01-13 Tom Tromey * defs.h (XMALLOC): Remove. * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cli-out.c (struct ui_out *): Likewise. * cli/cli-dump.c (add_dump_command): Likewise. (add_dump_command): Likewise. * complaints.c (get_complaints): Likewise. (find_complaint): Likewise. * dwarf2-frame.c (execute_cfa_program): Likewise. * dwarf2read.c (abbrev_table_read_table): Likewise. * gdbarch.sh: Likewise. * gdbarch.c: Rebuild. * inf-ttrace.c (inf_ttrace_add_page): Likewise. * interps.c (interp_new): Likewise. * lm32-tdep.c (lm32_gdbarch_init): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * mi/mi-console.c (mi_console_file_new): Likewise. * mi/mi-interp.c (mi_interpreter_init): Likewise. * mi/mi-out.c (mi_out_new): Likewise. * mi/mi-parse.c (mi_parse): Likewise. * microblaze-tdep.c (microblaze_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * observer.c (xalloc_observer_list_node): Likewise. * regcache.c (regcache_xmalloc_1): Likewise. * reggroups.c (reggroup_new): Likewise. (_initialize_reggroup): Likewise. * registry.c (register_data_with_cleanup): Likewise. * remote.c (remote_notif_stop_alloc_reply): Likewise. * ser-base.c (serial_ttystate): Likewise. * ser-mingw.c (make_pipe_state): Likewise. * ser-pipe.c (pipe_open): Likewise. * serial.c (serial_open): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_add_content_elements): Likewise. * tui/tui-file.c (tui_file_new): Likewise. * tui/tui-out.c (tui_out_new): Likewise. * ui-file.c (mem_file_new): Likewise. * ui-out.c (push_level): Likewise. (make_cleanup_ui_out_end): Likewise. (append_header_to_list): Likewise. (ui_out_new): Likewise. * user-regs.c (user_reg_add_builtin): Likewise. 2014-01-13 Tom Tromey * defs.h (XZALLOC): Remove. * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC. * ada-tasks.c (get_ada_tasks_pspace_data): Likewise. (get_ada_tasks_inferior_data): Likewise. * auto-load.c (get_auto_load_pspace_data): Likewise. * auxv.c (get_auxv_inferior_data): Likewise. * bfd-target.c (target_bfd_reopen): Likewise. * breakpoint.c (get_catch_syscall_inferior_data): Likewise. (deprecated_insert_raw_breakpoint): Likewise. * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise. * corelow.c (core_open): Likewise. * darwin-nat.c (darwin_check_new_threads): Likewise. (darwin_attach_pid): Likewise. * dummy-frame.c (dummy_frame_push): Likewise. * dwarf2-frame.c (dwarf2_frame_cache): Likewise. * dwarf2loc.c (allocate_piece_closure): Likewise. * elfread.c (elf_symfile_segments): Likewise. * eval.c (ptrmath_type_p): Likewise. * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise. * gdbtypes.c (alloc_type_arch): Likewise. (alloc_type_instance): Likewise. * hppa-tdep.c (hppa_gdbarch_init): Likewise. * inf-child.c (inf_child_can_use_agent): Likewise. * inflow.c (get_inflow_inferior_data): Likewise. * infrun.c (save_infcall_suspend_state): Likewise. * jit.c (jit_reader_load): Likewise. (get_jit_objfile_data): Likewise. (get_jit_program_space_data): Likewise. (jit_object_open_impl): Likewise. (jit_symtab_open_impl): Likewise. (jit_block_open_impl): Likewise. (jit_frame_sniffer): Likewise. * linux-fork.c (add_fork): Likewise. * maint.c (make_command_stats_cleanup): Likewise. * objfiles.c (get_objfile_pspace_data): Likewise. * opencl-lang.c (struct lval_closure): Likewise. * osdata.c (osdata_start_osdata): Likewise. * progspace.c (new_address_space): Likewise. (add_program_space): Likewise. * remote-sim.c (get_sim_inferior_data): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * skip.c (Ignore): Likewise. (skip_delete_command): Likewise. * solib-aix.c (get_solib_aix_inferior_data): Likewise. (library_list_start_library): Likewise. (solib_aix_current_sos): Likewise. * solib-darwin.c (get_darwin_info): Likewise. (darwin_current_sos): Likewise. * solib-dsbt.c (get_dsbt_info): Likewise. * solib-ia64-hpux.c (new_so_list): Likewise. (ia64_hpux_get_solib_linkage_addr): Likewise. * solib-spu.c (append_ocl_sos): Likewise. (spu_current_sos): Likewise. * solib-svr4.c (get_svr4_info): Likewise. (svr4_keep_data_in_core): Likewise. (library_list_start_library): Likewise. (svr4_default_sos): Likewise. (svr4_read_so_list): Likewise. * solib-target.c (library_list_start_library): Likewise. (solib_target_current_sos): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * symfile-debug.c (install_symfile_debug_logging): Likewise. * symfile.c (default_symfile_segments): Likewise. * target-descriptions.c (tdesc_data_init): Likewise. (tdesc_create_reg): Likewise. (struct tdesc_type *): Likewise. (tdesc_create_vector): Likewise. (tdesc_set_struct_size): Likewise. (struct tdesc_type *): Likewise. (tdesc_free_feature): Likewise. (tdesc_create_feature): Likewise. * windows-nat.c (windows_add_thread): Likewise. (windows_make_so): Likewise. * xml-support.c (gdb_xml_body_text): Likewise. (gdb_xml_create_parser_and_cleanup): Likewise. (xml_process_xincludes): Likewise. * xml-syscall.c (allocate_syscalls_info): Likewise. (syscall_create_syscall_desc): Likewise. 2014-01-12 Sergio Durigan Junior * i386-tdep.c (i386_stap_parse_special_token_triplet): New function, with code from i386_stap_parse_special_token. (i386_stap_parse_special_token_three_arg_disp): Likewise. (i386_stap_parse_special_token): Move code to the two functions above; simplify it. 2014-01-09 Pedro Alves Hui Zhu PR gdb/16101 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to bp_err_string. Don't mark the location shlib_disabled if the error thrown wasn't a generic or memory error. Catch errors thrown while inserting breakpoints in overlayed code. Output error message of software breakpoints. * remote.c (remote_insert_breakpoint): If this breakpoint has target-side commands but this stub doesn't support Z0 packets, throw NOT_SUPPORTED_ERROR error. * exceptions.h (enum errors) : New error. * target.h (target_insert_breakpoint): Extend comment. (target_insert_hw_breakpoint): Add comment. 2014-01-08 Pedro Alves * remote.c (remote_add_thread): Add threads silently if starting up. (remote_notice_new_inferior): If in all-stop, and starting up, don't call notice_new_inferior. (get_current_thread): New function, factored out from ... (add_current_inferior_and_thread): ... this. Adjust. (remote_start_remote) : Fetch the thread list. If we found any thread, then select the remote's current thread as GDB's current thread too. 2014-01-08 Joel Brobecker * NEWS: Create a new section for the next release branch. Rename the section of the current branch, now that it has been cut. 2014-01-08 Joel Brobecker GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5): * version.in: Bump version to 7.7.50.DATE-cvs. 2014-01-08 Yao Qi * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change type of 'id' to gdb_byte. Cast 'id' to 'const char *'. (spu_xfer_partial): Cast 'buf' to 'const char *'. 2014-01-08 Yao Qi * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass return value of bfd_get_filename to symbol_file_add_from_bfd. 2014-01-08 Pierre Muller Fix PR16201. * coff-pe-read.c (struct read_pe_section_data): Add index field. (add_pe_exported_sym): Use SECTION_DATA->INDEX for call to prim_record_mininal_symbol_and_info. (add_pe_forwarded_sym): Use known section number of forwarded symbol in call to prim_record_minimal_symbol_and_info. (read_pe_exported_syms): Set index field of section_data. 2014-01-07 Andrew Pinski * features/aarch64-core.xml (cpsr): Change to be 64bit. * features/aarch64.c: Regenerate. 2014-01-07 Andreas Schwab * target.c (return_null): Define. (update_current_target): Use it instead of return_zero for functions that return a pointer. 2014-01-07 Edjunior Barbosa Machado * source.c (add_path): Fix check for duplicated paths in the previously included paths. 2014-01-07 Honggyu Kim * ada-lang.c: Remove duplicated include statements. * alphabsd-nat.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64fbsd-nat.c: Ditto. * auto-load.c: Ditto. * ax-gdb.c: Ditto. * breakpoint.c: Ditto. * dbxread.c: Ditto. * fork-child.c: Ditto. * gdb_usleep.c: Ditto. * i386-darwin-tdep.c: Ditto. * i386fbsd-nat.c: Ditto. * infcmd.c: Ditto. * inferior.c: Ditto. * jv-lang.c: Ditto. * linux-nat.c: Ditto. * linux-tdep.c: Ditto. * m68kbsd-nat.c: Ditto. * m68klinux-nat.c: Ditto. * microblaze-tdep.c: Ditto. * mips-linux-tdep.c: Ditto. * mn10300-tdep.c: Ditto. * nto-tdep.c: Ditto. * opencl-lang.c: Ditto. * osdata.c: Ditto. * printcmd.c: Ditto. * regcache.c: Ditto. * remote-m32r-sdi.c: Ditto. * remote.c: Ditto. * symfile.c: Ditto. * symtab.c: Ditto. * tilegx-linux-nat.c: Ditto. * tilegx-tdep.c: Ditto. * tracepoint.c: Ditto. * valops.c: Ditto. * vaxbsd-nat.c: Ditto. * windows-nat.c: Ditto. * xtensa-tdep.c: Ditto. 2014-01-07 Yao Qi * spu-linux-nat.c (_initialize_spu_nat): Declare. 2014-01-07 Yao Qi Joel Brobecker * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t. (pdc_write_regs): Likewise. (fetch_regs_kernel_thread): Likewise. (store_regs_kernel_thread): Likewise. 2014-01-07 Joel Brobecker * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert tagged type objects to their actual type. 2014-01-07 Joel Brobecker * ada-valprint.c (print_field_values): Add "language" parameter. Update calls to print_field_values and print_variant_part. Pass new parameter "language" in call to val_print instead of "current_language". Replace call to ada_val_print by call to val_print. (print_variant_part): Add "language" parameter. (ada_val_print_struct_union): Update call to print_field_values. 2014-01-07 Joel Brobecker * ada-valprint.c (ui_memcpy): Delete. (ada_print_floating): Update documentation. Add empty line between between function documentation and implementation. Delete variable "buffer". Use ui_file_xstrdup in place of ui_file_put. Minor adjustments following this change. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_string): New function, extracted from ada_val_print_array. (ada_val_print_array): Replace extracted code by call to ada_val_print_string followed by a return. Move "else" branch to the function's top block. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_array): Move implementation down. Rename parameter "offset" and "val" into "offset_aligned" and "original_value" respectively. Add parameter "offset". 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_ref): Rewrite by mostly re-organizing the code. Change the "???" message printed when target type is a TYPE_CODE_UNDEF into "". 2014-01-07 Joel Brobecker * ada-valprint.c (print_record): Delete, implementation inlined... (ada_val_print_struct_union): ... here. Remove call to ada_check_typedef in inlined implementation. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_gnat_array): New function, extracted from ada_val_print_1; (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum) (ada_val_print_flt, ada_val_print_struct_union) (ada_val_print_ref): Likewise. (ada_val_print_1): Delete variables i and elttype. Replace extracted-out code by call to corresponding new functions. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_1): Replace calls to ada_val_print_1 by calls to val_print. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_1): Add parameter "language". Update calls to self accordingly. Replace calls to c_val_print by calls to val_print. 2014-01-07 Joel Brobecker * ada-valprint.c (print_record): Delete declaration. (adjust_type_signedness, ada_val_print_1): Likewise. (ada_val_print): Move function implementation down. (print_variant_part, print_field_values, print_record): Move function implementation up. 2014-01-07 Joel Brobecker * python/py-type.c (typy_get_name): New function. (type_object_getset): Add entry for attribute "name". * NEWS: Add entry mentioning this new attribute. 2014-01-07 Yao Qi * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if' statement. 2014-01-07 Yao Qi * gnu-nat.c (info_port_rights): Add qualifier const to argument args. 2014-01-07 Yao Qi * gnu-nat.c (trace_me): Use 'void' for empty argument list. 2014-01-07 Yao Qi * gnu-nat.c (make_inf) Update declaration. (make_inf): Make it static. (inf_set_traced): Likewise. (inf_port_to_thread, inf_task_died_status): Likewise. 2014-01-07 Yao Qi * gnu-nat.c (inf_tid_to_proc): Remove declaration. 2014-01-07 Yao Qi * gnu-nat.c (_initialize_gnu_nat): Declare. 2014-01-07 Yao Qi * gdbarch.sh (byte_order, byte_order_for_code): Change type to 'enum bfd_endian'. (struct gdbarch_info) : Change type to 'enum bfd_endian'. : Likewise. * gdbarch.c, gdbarch.h: Regenerated. 2014-01-06 Sasha Smundak * jit.c: (jit_reader_load_command): Fix JIT reader path creation. 2014-01-06 Tom Tromey * doublest.c (convert_doublest_to_floatformat): Use const, not CONST. * somread.c (som_symtab_read): Likewise. 2014-01-07 Hui Zhu * gdb_bfd.c (gdb_bfd_stash_filename): Removed. (gdb_bfd_open): Removed gdb_bfd_stash_filename. (gdb_bfd_fopen): Ditto. (gdb_bfd_openr): Ditto. (gdb_bfd_openw): Ditto. (gdb_bfd_openr_iovec): Ditto. (gdb_bfd_fdopenr): Ditto. * gdb_bfd.h (gdb_bfd_stash_filename): Removed. * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename with xstrdup. * solib-darwin.c (darwin_bfd_open): Alloc res->filename with xstrdup. * symfile-mem.c (symbol_file_add_from_memory): Removed gdb_bfd_stash_filename. 2014-01-03 Doug Evans * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from output. 2014-01-01 Joel Brobecker Update year range in copyright notice of all files. 2014-01-01 Joel Brobecker * top.c (print_gdb_version): Set copyright year to 2014. 2014-01-01 Joel Brobecker * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013. For older changes see ChangeLog-2013. Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never coding: utf-8 End: