Wed Nov 15 00:28:03 1995 Jeffrey A Law (law@cygnus.com) * gdb.base/callfuncs.exp: Remove bogus hppa xfails. * gdb.base/corefile.exp: Likewise. * gdb.base/funcargs.exp: Likewise. Tue Nov 14 15:18:10 1995 Stu Grossman (grossman@cygnus.com) * config/hmsirom.exp: Setup for talking to hmsi ROM monitor. * config/monitor.exp: Add support for setting baud rate. Sat Nov 4 15:35:52 1995 Fred Fish * gdb.base/a1-selftest.exp: Remove i*86-*-sysv4* and i*86-*-linux* xfails for "backtrace through signal handler". * gdb.base/corefile.exp: Add i*86-*-sysv4* xfail for "print func2::coremaker_local". * gdb.base/break.exp: Add i*86-*-sysv4*, sparc-sun-sunos4, alpha-dec-osf2* xfail for "delete all breakpoints when none". Wed Nov 1 15:57:16 1995 Fred Fish * gdb.base/break.exp: Change test that deletes all breakpoints when no user breakpoints are installed. A post 4.15 change causes gdb to no longer prompt in this case. Tue Oct 31 15:13:43 1995 Fred Fish * gdb.base/return.exp (return_tests): Change xfail for test "correct value returned double test" to stop xfailing at Solaris 2.5. Apparently the bug has been fixed. Sun Oct 29 12:18:16 1995 Fred Fish * gdb.stabs/ecoff.sed: Remove comment lines except for first one. IRIX 4.0 /bin/sed chokes on them, though they work fine elsewhere. Tue Oct 24 11:12:12 1995 Jeffrey A Law (law@cygnus.com) * gdb.disasm/hppa.exp: Test lci and syncdma instructions. * gdb.disasm/hppa.s: Corresponding changes. Wed Oct 18 11:27:47 1995 Jeffrey A Law (law@cygnus.com) * gdb.base/configure.in (hppa*-*-hpux*): No longer needs target makefile fragment. * config/mt-hpux: Deleted. Tue Oct 17 23:02:12 1995 Jeffrey A Law (law@cygnus.com) * Many files: When warning about suppressed tests due to a nonexistant test binary, avoid incrementing the warning count. Tue Oct 10 11:00:41 1995 Fred Fish * Makefile.in (TARGET_FLAGS_TO_PASS): Remove BISON. Sun Oct 8 04:23:14 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/return.exp: Change xfail from "sparc-*-solaris2.*" to "sparc-*-solaris2*". Sat Sep 23 01:22:23 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/coremaker.c: Produce a full core dump for AIX targets. Add global and local variables and initialize them. * gdb.base/corefile.exp: Test correct mapping of corefile sections by printing variables. Remove rs6000 and powerpc xfails, BFD now extracts the file name and terminating signal from the core file. * TODO: Remove note about tests for correct mapping of corefile. * gdb.base/ptype.c (main): Use boolean2 to inhibit AIX 4.1 xlc from optimizing it away. * gdb.stabs/weird.exp: Remove rs6000 xfail, xcoffread.c now handles common blocks. start-sanitize-sh3e Thu Sep 21 01:28:10 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/sh3.s (fmac): Update for new assembler syntax * gdb.disasm/sh3.exp (fmac): Corresponding changes. end-sanitize-sh3e Wed Sep 20 13:15:05 1995 Ian Lance Taylor * Makefile.in (maintainer-clean): New target, synonym for realclean. * gdb.base/Makefile.in (maintainer-clean): Likewise. * gdb.c++/Makefile.in (maintainer-clean): Likewise. * gdb.chill/Makefile.in (maintainer-clean): Likewise. * gdb.disasm/Makefile.in (maintainer-clean): Likewise. * gdb.stabs/Makefile.in (maintainer-clean): Likewise. * gdb.threads/Makefile.in (maintainer-clean): Likewise. Sun Sep 10 13:14:01 1995 Fred Fish * gdb.base/scope.exp (text_at_main): Add "hppa*-*-hpux*" xfails when not gcc compiled for "print foo::funclocal". (test_at_foo): Add "hppa*-*-hpux*" xfails when not gcc compiled for: "print foo::funclocal at foo", "print 'scope1.c'::foo::funclocal at foo", "print foo::funclocal_bss at foo", "print 'scope1.c'::foo::funclocal_bss at foo", "print foo::funclocal_ro at foo", "print 'scope1.c'::foo::funclocal_ro at foo", "print bar::funclocal at foo" and "print 'scope1.c'::bar::funclocal at foo". (test_at_bar): Add "hppa*-*-hpux*" xfails when not gcc compiled for "print foo::funclocal at bar". Expand all messages to ensure that they identify that the test is at bar(). * gdb.base/opaque.exp: Add "hppa*-*-hpux*" xfails when not gcc compiled for: "ptype on opaque struct pointer (statically)", "ptype on opaque struct tagname (statically)", "ptype on opaque struct pointer (dynamically) 1", "ptype on opaque struct tagname (dynamically) 1", "ptype on opaque struct pointer (dynamically) 2" and "ptype on opaque struct tagname (dynamically) 2 * gdb.base/nodebug.exp: Add "hppa*-*-hpux*" xfails when not gcc compiled for: "p datalocal" "whatis datalocal", "ptype datalocal", "p bsslocal", "whatis bsslocal", and "ptype bsslocal". * gdb.base/langs.exp: Add "hppa*-*-hpux*" xfails for "backtrace in langs.exp" and "up to langs0__2do in langs.exp" when not gcc compiled. * gdb.base/funcargs.exp (float_and_integral_args): Add "hppa*-*-hpux*" xfail for "run to call2a" when not gcc compiled. (discard_and_shuffle): Add "hppa*-*-hpux*" xfail for "backtrace from call6a" when not gcc compiled. (shuffle_round_robin): Add "hppa*-*-hpux*" xfail for "backtrace from call7a" when not gcc compiled. * gdb.base/callfuncs.exp (do_function_calls): Add "hppa*-*-hpux*" xfail when not gcc compiled for "p t_char_array_values(char_array_val2,char_array_val1)", "p t_char_array_values(char_array_val1,char_array_val2)", "p t_char_array_values("carray 1","carray 2")", "p t_char_array_values("carray 1",char_array_val2)", "p t_char_array_values(char_array_val1,"carray 2")", "p sum_args(1,{2})", "p sum_args(2,{2,3})", "p sum_args(3,{2,3,4})", "p sum_args(4,{2,3,4,5})" * gdb.base/corefile.exp: Add "hppa*-*-hpux*" xfail for "backtrace in corefile.exp" when not gcc compiled. Sat Sep 9 01:35:39 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/signals.exp: Rewrite `handle all print' test as a procedure. Accept blanks or TABs as whitespace, increase timeout and expect input buffer size for the large output from the command. Remove "i*86-*-bsdi2.0" xfail. Sat Sep 2 06:41:26 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/setvar.exp: Add new testcases for truncation when assigning invalid values to bitfields. Sat Sep 2 00:17:31 1995 Fred Fish * gdb.base/callfuncs.exp (do_function_calls): Remove mips-sgi-irix* xfail for "call inferior func with struct - returns char *" and fix test so that an optional (unsigned char *) cast is accepted in the result. Fri Sep 1 13:42:01 1995 Fred Fish * gdb.base/funcargs.exp (float_and_integral_args): Remove sparc-sun-solaris2* xfail for "print f1 after run to call2a". * gdb.c++/Makefile.in (SUFFIXES): Add .SUFFIXES and ".cc" suffix. * gdb.base/signals.exp: Remove duplicate "handle all print" test that accidentally got checked in. Sun Aug 27 23:35:35 1995 Fred Fish * gdb.base/callfuncs.exp (do_function_calls): Add alpha-dec-osf2* clear_xfail for "p t_float_values2(3.14159,float_val2)" for gcc compiled test. * gdb.base/opaque.exp (setup_xfail_on_opaque_pointer): Add mips-sgi-irix5* xfail for not gcc compiled. * gdb.base/Makefile.in (nodebug.o): Also create nodebug.ci. * gdb.base/nodebug.exp: Add mips-sgi-irix5 xfail when not gcc compiled for "p top", "whatis top", "p middle", and "whatis middle". * gdb.base/whatis.exp: Add mips-sgi-irix* xfail for "whatis signed char" for not gcc compiled. * gdb.base/setvar.exp: Add mips-sgi-irix4* xfail (works on irix5) for "set variable signed char=-1 (-1)" and "set variable signed char=0xFF (0xFF)" for not gcc compiled. * gdb.base/funcargs.exp (float_and_integral_args): Add mips-sgi-irix5* xfail for "run to call2a" for not gcc compiled. Add mips-sgi-irix* xfail when not gcc compiled for "continue to call2b". Add mips-sgi-irix4* xfail (works with irix5) when gcc compiled for "continue to call2g". (discard_and_shuffle): Add mips-sgi-irix5* xfail whn not gcc compiled for "backtrace from call6a" (shuffle_round_robin): Add mips-sgi-irix* xfail when not gcc compiled for "backtrace from call7k". Add mips-sgi-irix5* xfail when not gcc compiled for "backtrace from call7a". (localvars_after_alloca): Fix gdb_test cmds for "print * after runto ...". Remove rs6000-*-* xfails for "print i after runto localvars_after_alloca" and "print l after runto localvars_after_alloca" for all compilers. * gdb.base/exprs.exp: Add mips-sgi-irix4* xfails (works with irix5), when not compiled with gcc, for: "print signed char == (minus)", "print signed char != (minus)", "print signed char < (minus)", "print signed char > (minus)". * gdb.base/callfuncs.exp (do_function_calls): Add mips-sgi-irix* xfail, when compiled with native compiler, for "call inferior func with struct - returns char *". * gdb.base/return.exp (return_tests): Change xfail for "correct value returned double test" to include Solaris 2.4. * gdb.base/funcargs.exp (float_and_integral_args): Add sparc-sun-solaris2* xfail for "print f1 after run to call2a". Sat Aug 26 00:26:11 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/setvar.c, gdb.base/setvar.exp: Add new tests for enumeration bitfields if compiling with GNU C. * lib/gdb.exp: Consume `(y or n) ' in `Reinitialize source path to empty' prompt. Tue Aug 22 00:30:37 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/scope.exp: xfail 'scope0.c'::filelocal_bss before run test for PRO targets. * gdb.base/funcargs.exp: Avoid ever setting more than 8 breakpoints in the inferior at any given time by making two groups of breakpoints for call2*, call6* and call7* tests. Sun Aug 20 06:58:25 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/funcargs.exp: Fix typos introduced by Aug 15 change. * gdb.base/callfuncs.c (main): Use struct_val1 to inhibit xlc from optimizing it away. * gdb.base/callfuncs.exp: Remove rs6000-*-* xfails for "call inferior func with struct". Wed Aug 16 11:57:15 1995 Stan Shebs * configure.in: Only configure gdb.chill for particular targets. Tue Aug 15 09:42:44 1995 Fred Fish * gdb.base/Makefile.in: Add action to .c.o transformation rule that generates a .ci file for each .o file and remove explicit .c.o rules except for callfuncs.o. * gdb.c++/Makefile.in: Add .cc.o transformation rule that generates a .ci file for each .o file and remove explicit .cc.o rules. (clean): Remove *.tmp *.ci files. (EXECUTABLES): Remove templ-info.exp. * gdb.base/compiler.c: New file. * gdb.c++/compiler.cc: New file * gdb.base/scope.exp: Source gdb.base/scope.ci. Change rs6000-*-* xfail for "print 'scope0.c'::filelocal_ro" and "print 'scope1.c'::filelocal" and "print 'scope1.c'::filelocal_bss" and "print 'scope1.c'::filelocal_ro" and "print 'scope1.c'::foo::funclocal" and "print 'scope1.c'::foo::funclocal_ro" and "print 'scope1.c'::bar::funclocal" and "print 'scope0.c'::filelocal_ro" and "print 'scope1.c'::filelocal at foo" and "print 'scope1.c'::filelocal_bss at foo" and "print 'scope1.c'::filelocal_ro at foo" and "print 'scope1.c'::foo::funclocal at foo" and "print 'scope1.c'::foo::funclocal_bss at foo" and "print 'scope1.c'::foo::funclocal_ro at foo" and "print 'scope1.c'::bar::funclocal at foo" and "print 'scope0.c'::filelocal_ro" and "print 'scope1.c'::filelocal" and "print 'scope1.c'::filelocal_bss" and "print 'scope1.c'::filelocal_ro" and "print 'scope1.c'::foo::funclocal" and "print 'scope1.c'::foo::funclocal_bss" and "print 'scope1.c'::foo::funclocal_ro" and "print 'scope1.c'::bar::funclocal" and "print 'scope1.c'::bar::funclocal_bss" to only be xfail'd when not compiled with gcc. Add rs6000-*-* xfail for "print 'scope0.c'::filelocal_bss before run" when compiled with gcc. (test_at_main): Add rs6000-*-* xfail for "print filelocal_ro in test_at_main" when compiled with gcc. * gdb.base/ptype.exp: Source gdb.base/ptype.ci. Add rs6000-*-aix* xfail for "whatis unnamed typedef'd enum (compiler bug in IBM's xlc)" and "ptype t_char_array", not compiled with gcc. * gdb.base/list.exp (test_list_function): Add rs6000-*-* xfail for "list foo (in include file)" when gcc compiled. * gdb.base/funcargs.exp: Source gdb.base/funcargs.ci (integral_args): Add rs6000-*-* xfail for "run to call0a" if not compiled with gcc. (unsigned_integral_args): Add rs6000-*-* xfail for "run to call1a" if not compiled with gcc. (float_and_integral_args): Add rs6000-*-* xfail for "run to call2a" if not compiled with gcc and for "continue to call2b" for any compiler. Add rs6000-*-* xfail to "print f1 after run to call2a" for gcc compiled. (discard_and_shuffle): Add rs6000-*-* xfail for "run to call6a". (shuffle_round_robin): Add rs6000-*-* xfail for "backtrace from call7a" if not compiled with gcc. Add rs6000-*-* xfail for "backtrace from call7b" if compiled with gcc. (call_after_alloca): Add rs6000-*-* xfail for "print c in call_after_alloca" and "print s in call_after_alloca" and "backtrace from call_after_alloca_subr" if not compiled with gcc. (localvars_in_indirect_call): Add rs6000-*-* xfail for "print c in localvars_in_indirect_call" and "print c in localvars_in_indirect_call" and "backtrace in indirectly called function" and "stepping into indirectly called function" if not compiled with gcc. (localvars_after_alloca): Add rs6000-*-* xfail for "print c after runto localvars_after_alloca" and "print s after runto localvars_after_alloca" and "print i after runto localvars_after_alloca" and "print l after runto localvars_after_alloca" for all compilers. * gdb.base/whatis.exp: Source gdb.base/whatis.ci rather than whatis-info.exp. * gdb.base/opaque.exp: Source gdb.base/opaque0.ci rather than opaque-info.exp. Setup rs6000-*-* xfail for "ptype on opaque struct pointer (statically)" and "ptype on opaque struct pointer (dynamically)" when not compiled with gcc. * gdb.base/callfuncs.exp: Source gdb.base/callfuncs.ci rather than callf-info.exp. (do_function_calls): Add clear_xfail for rs6000-*-* for "p t_float_values2(3.14159,float_val2)". Seems to work fine there, both with xlc and gcc. Need to find out what it is doing right and fix other platforms. * gdb.base/callfuncs.exp: Add rs6000-*-* xfail for "call inferior func with struct - returns int", "call inferior func with struct - returns long", "call inferior func with struct - returns float", "call inferior func with struct - returns double", "call inferior func with struct - returns char *", but only if not gcc compiled (presumes xlc compiled). Change rs6000-*-* xfails for "call inferior func with struct - returns char" and " call inferior func with struct - returns short" to only xfail if not using gcc. (clean mostlyclean): Remove *.ci and *.tmp files. * gdb.c++/templates.exp: Source gdb.c++/templates.ci rather than templ-info.exp. * gdb.base/langs.exp: Source gdb.base/langs.ci. Add rs6000-*-* xfail for "up to foo in langs.exp" "up to cppsub_ in langs.exp" and "up to fsub in langs.exp" when not gcc compiled. Sat Aug 12 15:05:36 1995 Jeffrey A. Law * gdb.base/callfuncs.exp: Add xfails for the powerpc. * gdb.base/corefile.exp: Likewise. * gdb.base/list.exp: Likewise. * gdb.base/scope.exp: Likewise. * gdb.base/siganls.exp: Likewise. * gdb.base/nodebug.exp: Add xfails for the powerpc. Handle aix4 compiler output. * gdb.base/whatis.exp: Likewise. start-sanitize-sh3e Fri Aug 11 13:36:20 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/sh3.exp (all_fp_misc_tests): No longer expect a failure (opcode table has been fixed to match reality). end-sanitize-sh3e Mon Aug 14 09:01:59 1995 Fred Fish * gdb.base/callfuncs.exp: Add rs6000-*-* xfails for "call inferior func with struct - returns char", "call inferior func with struct - returns short" * gdb.base/scope.exp: Remove rs6000-*-* xfails for "print 'scope0.c'::filelocal at main", "print 'scope0.c'::filelocal_bss in test_at_main", "print 'scope0.c'::filelocal at foo", "print 'scope0.c'::filelocal_bss in test_at_foo", "print 'scope0.c'::filelocal at bar", "print 'scope0.c'::filelocal_bss in test_at_bar" * gdb.base/list.exp: Remove rs6000-*-* xfail for "list function in source file 1". This bug seems to have been fixed with both gcc and native cc (was native assembler bug?). Wed Aug 9 08:04:12 1995 Fred Fish (fnf@cygnus.com) * gdb.base/a1-selftest.exp: Change "i*86-*-sysv4" xfail for "backtrace through signal handler" to "i*86-*-sysv4*". * gdb.base/signals.exp: Add xfail for "'next' behaved as continue" case. Add "known SVR4 bug" to fail message. Add "i*86-*-bsdi2.0" xfail for "handle all print". Add "i*86-*-bsdi2.0" xfail for "backtrace in signals_tests_1". * gdb.base/ptype.exp: Add "i*86-*-sysv4*" xfail for "whatis unnamed typedef'd enum..." and "ptype t_char_array". * gdb.base/langs.exp: Add "i*86-*-sysv4*" xfail for "up to foo in langs.exp", "show language at foo in langs.exp", "up to cppsub_ in langs.exp", "show language at cppsub_ in langs.exp", "up to fsub in langs.exp", and "show language at fsub in langs.exp". * gdb.base/corefile.exp: Add "i*86-*-sysv4*" to xfail for "bactrace in corefile.exp". * gdb.base/callfuncs.exp: Change xfail to "i*86-*-*" for "call inferior function with struct - returns float" and "call inferior function with struct - returns double". start-sanitize-sh3e Mon Aug 7 02:43:28 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/sh3.s: Source for sh3 disassembler tests. * gdb.disasm/sh3.exp: Run the sh3 disassembler tests. * gdb.disasm/configure.in (sh-*-*): Use sh3.mt makefile fragment. * gdb.disasm/sh3.mt: Makefile fragment for sh3 ests. end-sanitize-sh3e Mon Aug 7 08:09:37 1995 Fred Fish * Makefile.in (CHILL_FOR_TARGET): Use previously defined (or overriden) "CHILL" macro rather then bare "gcc". Also look for ../../gcc/xgcc since that is what we will actually need, not "Makefile". Remove following assignment of CHILL to CHILL_FOR_TARGET because that results in recursive definition. Sun Aug 6 16:52:29 1995 Fred Fish * gdb.base/corefile.exp: Change xfail for backtrace in corefile.exp from linuxaout to all linux. * gdb.base/sigall.exp (test_one_sig): Specifically deal with cases where we miss the breakpoint at the signal handler for some reason. Setup xfail for linuxoldld/linuxaout and getting SIGIO. Setup xfail for linuxoldld/linuxaout for hitting SIGURG breakpoint. * gdb.base/signals.exp: Setup xfail for "next" acting like continue to add linuxoldld. Setup xfail for all linux for "next to handler in signals_tests_1", "backtrace in signals_tests_1", "continue to func1", "pass SIGUSR1", and continue to handler". Thu Aug 3 10:45:37 1995 Fred Fish * Update all FSF addresses except those in COPYING* files. Sun Jul 30 17:50:35 1995 Fred Fish * gdb.base/a2-run.exp: Change messages to be more explicit about the status of args, and quote binfile in results. Sun Jul 30 10:24:20 1995 Fred Fish * gdb.base/callfuncs.exp: Add tests for passing structs to inferior functions and return various types. * gdb.base/callfuncs.c: Add functions to receive a struct and return a member of the struct, in various types. Sat Jul 29 14:22:33 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/Makefile.in (clean): Remove callf-info.exp. Fri Jul 28 13:36:11 1995 Brendan Kehoe * config/vxworks29k.exp: New file, sources vxworks.exp. Fri Jul 28 00:28:36 1995 Jeffrey A. Law * config/gdbremote.exp: New file. Testing framework using gdbserver. Thu Jul 27 12:17:14 1995 Fred Fish (fnf@cygnus.com) * gdb.base/interrupt.exp: Setup "i*86-*-linux" xfail for "call function when asleep" and "send end of file". * gdb.base/corefile.exp: Add "i*86-*-linuxaout" to xfail list for "backtrace in corefile.exp". * gdb.base/a1-selftest.exp: Add "i*86-*-linux*" to xfail list for "backtrace through signal handler". * gdb.base/corefile.exp: Make sure we actually generate a core file before trying the core tests. Some systems allow the user to suppress generation of core files and default to that (linux for example). * gdb.base/signals.exp: Change xfail for "next" acting like "continue" from "i*86-*-linux" to "i*86-*-linuxaout". Works with ELF beta. Tue Jul 25 17:30:10 1995 Jeffrey A. Law * gdb.threads: New directory with some crude multi-threaded gdb tests (step.exp and step2.exp). * config/mt-lynx (STEP_EXECUTABLE): Define. (THREADFLAGS): Define. Tue Jul 25 01:03:52 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/sigall.exp: Avoid losing in SIGPRIO test on lynx. * gdb.base/signals.exp: Disable whole file for lynx until further notice. * gdb.base/signals.exp: xfail test where "next" acts like "continue" for lynx. * gdb.base/interrupt.exp: xfail test for calling function while inferior is asleep for lynx. * gdb.base/watchpoint.exp: Handle more cases of gdb echoing more than one cr-lf after each command. Sun Jul 23 23:33:18 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * configure.in: Reinstate setting of stabsdirs variable, fix typo in setting up configdirs for native builds. * gdb.base/return.exp: Fix typo in return double test. * gdb.base/return.c (tmp2, tmp3): Made global to inhibit the compiler from optimizing them away. Fri Jul 21 11:39:34 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/gdbvars.exp: Expect zero or more additional cr-lf sequences to be echo'd by gdb when using gdb_test. * gdb.chill/chexp.exp: Likewise. * gdb.fortran/exprs.exp: Likewise Thu Jul 20 13:28:36 1995 Jeffrey A. Law * gdb.base/a1-selftest.exp: Reset the timeout value to 30 seconds after the inferior gdb has started. * gdb.base/a2-run.exp: Handle gdb echoing more than one cr-lf after each command. * gdb.base/funcargs.exp: Likewise. * gdb.base/gdbvars.exp: Likewise. * gdb.base/interrupt.exp: Likewise. * gdb.base/list.exp: Likewise. * gdb.base/watchpoint.exp: Likewise. * gdb.c++/demangle.exp: Likewise. * gdb.c++/inherit.exp: Likewise. * gdb.chill/chexp.exp: Likewise. * gdb.fortran/exprs.exp: Likewise. * gdb.base/watchpoint.exp: Disable watchpoint triggered in syscall test if we can't handle IO to/from the inferior. * gdb.c++/misc.exp: Always check for a program already being started after sending a "run" command to gdb. * gdb.base/twice.exp: Start with a fresh gdb. * gdb.chill/chexp.exp: Remove skip_chill_tests check; these tests only depend on gdb's expression code, not the chill runtime. * gdb.base/return.c: Put return values into variables so we can have gdb print them rather than depending on the program to print them. * gdb.base/return.exp: Corresponding changes. * lib/gdb.exp: Provide default value for noinferiorio. * gdb.base/interrupt.exp: Skip tests if we can't handle IO to/from the inferior. * gdb.base/break.exp: Always check for a program already being started after sending a "run" command to gdb. (text_next_with_recursion): Don't check the output from the program's printf statement. Instead just make sure the program exited. * gdb.base/commands.exp: Protect tests which need arguments with $noargs conditionals. Wed Jul 19 22:42:43 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/printcmds.exp: Adjust expect patterns for addresses of structure member arrays to match gdb/valops.c:value_addr change. Mon Jul 17 10:12:27 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/a1-selftest.exp: Fix unmatched quotes in many timeout cases. Wed Jul 12 10:20:08 1995 Fred Fish (fnf@cygnus.com) * configure.in (configdirs): Remove gdb.chill from default list of subdirs and then add it back in only if doing a native build. The current chill compiler does not yet work in any cross build. * Revert all signal changes from Jul 6. * gdb.base/{sigall.c signals.c}: Define away signal() and alarm() for sh-hms targets, allowing these tests to link, with no other changes. Testing is suppressed by setting "nosignals" in site.exp. Thu Jul 6 20:58:30 1995 Fred Fish (fnf@cygnus.com) * configure.in (signaldirs): Define and add to configdirs for all targets except some specific ones that are known to not support signals. Also clean up formatting. * gdb.base/Makefile.in (EXECUTABLES): Remove sigall and signals. (signals, sigall): Remove rules to build. * gdb.base/{sigall.c, sigall.exp, signals.c, signals.exp}: Moved to new gdb.signals directory. * gdb.signals: New test directory. * gdb.signals/{Makefile.in, configure.in, sigall.c, sigall.exp, signals.c signals.exp}: New or moved files. Sun Jun 25 12:55:18 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/interrupt.exp: Don't choke if $nointerrupts doesn't exist. Wed Jun 21 16:35:55 1995 Fred Fish * gdb.base/return.exp: Xfail `return double' test failure on at least Solaris 2.3 and handle future/past versions on a case by case basis as appropriate. Also update message to include i*86 failures. Wed May 24 07:10:10 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in: Change variable CFLAGS to TESTSUITE_CFLAGS. * lib/gdb.exp: Fix comment which erroneously identified gdb_file_cmd as gdb_load (the 19 May change was in fact to gdb_file_cmd not gdb_load). * config/unix-gdb.exp (gdb_load): Add "upvar timeout timeout". * gdb.base/setvar.exp: Make test names consistent between pass and fail cases. Use gdb_test more. Fri May 19 07:22:58 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp (gdb_load): Add "upvar timeout timeout". Mon May 15 23:50:51 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/help.exp: Fix expected help string for `show commands'. Thu May 11 07:55:11 1995 Jim Kingdon * gdb.stabs/xcoff.sed: Change N_LSYM to C_DECL not C_LSYM. * gdb.stabs/weird.exp: Remove xfail for xcoff bitching about lack of a text section. Thu May 11 15:02:24 1995 Stu Grossman (grossman@andros.cygnus.com) * config/monitor.exp (gdb_target_monitor): Fix loop interator so that loop eventually terminates. Fix Connection refused logic so that testsuite will expire nicely. Wed May 10 17:57:35 1995 Stu Grossman (grossman@andros.cygnus.com) * config/cpu32bug.exp, config/est.exp, config/hppro.exp, config/rom68k.exp: New tcl glue for the appropriate monitors. These all just end up calling monitor.exp. * config/monitor.exp (gdb_target_monitor): Handle `Connection refused' by retrying. Cleanup some timeout issues. * (gdb_load): Reduce timeout. Cleanup some timeout issues. * lib/gdb.exp (gdb_test gdb_test_exact): Upvar timeout so that callers don't have to set/restore global timeout variable. * The following set of changes centralizes management of the global timeout variable. This way, it can be set in one target dependent place instead of dozens of places scattered throughout the test suite. If you need to lengthen a timeout, then you should either set timeout in one of the config/{target}.exp files, or multiply it by a factor. Setting it to an absolute value is always going to lose for some targets. * gdb.base/a1-selftest.exp (test_with_self): Only use local timeout. * gdb.base/callfuncs.exp (do_function_calls): Don't set timeout. * gdb.base/funcargs.exp: Don't set timeout. * gdb.base/list.exp (test_forward_search): Only use local timeout. * gdb.base/printcmds.exp (test_print_string_constants test_print_array_constants): Don't set timeout. * gdb.base/ptype.exp: Don't set timeout. * gdb.base/recurse.exp: Don't set timeout. * gdb.base/return.exp: Don't set timeout. * gdb.base/watchpoint.exp: Don't set timeout. * gdb.c++/classes.exp (do_tests): Don't set timeout. * gdb.c++/virtfunc.exp (test_virtual_calls): Don't set timeout. Wed May 10 16:03:23 1995 Torbjorn Granlund * Makefile.in: Make clean targets work also when SUBDIRS is empty. Mon May 1 07:32:48 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp: Disable chill tests for irix5. Wed Apr 26 07:36:03 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/scope.exp: Make test names unique. Use gdb_test. Make each test pass or fail. Sun Apr 23 21:32:32 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/opaque.exp: Remove xfails for aix; print a warning if xlc not gcc. Fri Apr 21 15:44:02 1995 Stu Grossman (grossman@rtl.cygnus.com) * cpu32bug.exp est.exp rom68k.exp: Delete. Unify into monitor.exp. Wed Apr 19 17:41:21 1995 Stu Grossman (grossman@cygnus.com) * config/est.exp: Fix copyright and comments. Remove dead code. Use targetname, serialport and baud variables instead of fixed constants. * config/rom68k.exp: Fix copyright and comments. Remove dead code. * config/cpu32bug.exp: New file to support cpu32bug monitors. Wed Apr 19 13:47:16 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/watchpoint.exp: Don't run test_watchpoint_triggered_in_syscall for sunos. Mon Apr 17 12:48:52 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/{break.c,run.c}: Don't include vxWorks.h or stdioLib.h; they don't seem to exist. Do include stdio.h. Fri Apr 14 09:40:22 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/a1-selftest.exp: Add alpha xfail. Mon Apr 10 13:07:50 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/watchpoint.c (main): Prompt before calling read(). * gdb.base/watchpoint.exp (test_watchpoint_triggered_in_syscall): Revise accordingly. Remove cruft about sending "123" several times, until it gets noticed. Clean up the "print buf[0]" stuff so that it passes or fails, and waits for prompts in the usual way. Sun Apr 9 09:02:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/recurse.exp: Fix comment. * TODO: Remove item about printing variables in nodebug.exp. Add item about enabling tests which are only run on some targets. * gdb.base/watchpoint.exp: Various cleanups (make each test pass or fail, make test names unique, use new gdb_test convention regarding pattern, use gdb_test more, etc.). * gdb.base/bitfields.exp: Various cleanups (make each test pass or fail, make test names unique, etc.). Sat Apr 8 02:47:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/nodebug.c: Change return type of top and middle to short. * gdb.base/nodebug.exp: Remove xfails for ecoff systems, they are fixed by the recent mdebugread.c changes. Allow `short ()' as type for top and middle. Thu Apr 6 08:54:18 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/break.exp: Remove commented out if $usestubs {}. As nearly as I can tell, the whole thing was an accident in Stu's change of 24 Mar 1995 (logged in ../ChangeLog), in which he meant to replace a send/expect pair with gdb_test, but ended up only adding the gdb_test. My change of 24 Mar 1995 and Kung's change of 30 Mar 1995 took care of it, but left this vestigial comment which I am now nuking. Mon Apr 3 09:00:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/break.exp: Look for different line number for breakpoint at main depending on usestubs. Sun Apr 2 08:15:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/list.exp: Adjust some alternate expect patterns to match recent list0.c change. Add alternate expect pattern for output from `list default lines around main' for optimizing compilers. Sat Apr 1 07:23:22 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp: If nosignals is not set, set it to 0. Fri Mar 31 16:13:48 1995 Kung Hsu * config/slite-gdb.exp: Responds to load symbol table prompt. * gdb.base/break.exp: Adjust line number, fix rerun. * gdb.base/langs0.c: Add #ifdef usestubs. Thu Mar 30 15:36:55 1995 Kung Hsu * gdb.base/list.exp: Adjust line contents after adding new lines in list0.c. Also fix a syntax error. * lib/gdb.exp (gdb_run_cmd): Special handling for targets use stubs. * gdb.base/break.exp: ditto. * gdb.base/list.exp: ditto. * gdb.base/bitfields.c: Add #ifdef usestubs in main(). * gdb.base/run.c: ditto. * gdb.base/list0.c: ditto. * gdb.base/funcargs.c: ditto. Wed Mar 29 17:09:29 1995 Stu Grossman (grossman@cygnus.com) * testsuite/config/rom68k.exp (gdb_target_rom68k): Use $targetname, $serialport and $baud instead of hardwired variables. * testsuite/gdb.base/{sigall.exp signals.exp}: Skip these if the target doesn't support signals. Wed Mar 29 12:29:34 1995 Kung Hsu * lib/gdb.exp (runto_main): Fix regular expression bug, add return 1. Tue Mar 28 08:46:45 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/recurse.exp: Make test names unique. Change \\(+ to \\(. Don't rely on the value of an auto variable before it has been initialized. Use gdb_test more. Mon Mar 27 08:00:34 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp (default_gdb_version): A version number must start with a digit, but other than that contains all characters up to the first whitespace character. Sun Mar 26 13:19:32 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/commands.exp (breakpoint_command_test): New tests. Sat Mar 25 15:38:06 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.c++/*.exp: Warn if executable does not exist. The original reason for skipping the warning was that configure.in sometimes intentionally skipped building the executables but the tcl code had no way of knowing. That (a) was always bogus with respect to error handling, (b) is no longer true (right now there is no way to skip C++ tests). * gdb.c++/demangle.exp: Remove unused binfile and srcfile variables. Sat Mar 25 01:16:10 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/list.exp: Add expect patterns for output from SunPRO compiled executables. * gdb.base/whatis.exp: Allow leading `signed' for all v_signed_* types. Fri Mar 24 06:11:05 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/break.exp (test_next_with_recursion): Accept any line number (we are already testing that the correct source line text gets printed). * gdb.base/break.exp: Make one test if $usestubs. I'm not sure that is what is intended, but something needed to be done to get sunos4 native working again. * gdb.c++/misc.cc (main): Fix typo (#iffef -> #ifdef). * gdb.base/a1-selftest.exp (test_with_self): Remove comment which apparently went with a (very) old xfail. Fri Mar 24 13:41:09 1995 Kung Hsu * gdb.base/callfuncs.exp: call runto_main instead of runto main. runto_main is a proc in gdb.exp that will do 'step' for target use stubs. * gdb.base/exprs.exp: ditto. * gdb.base/interrupt.exp: ditto. * gdb.base/opaque.exp: ditto. * gdb.base/printcmds.exp: ditto. * gdb.base/ptype.exp: ditto. * gdb.base/scope.exp: ditto. * gdb.base/setvar.exp: ditto. * gdb.base/signals.exp: ditto. * gdb.base/twice.exp: ditto. * gdb.c++/classes.exp: ditto. * gdb.c++/inherit.exp: ditto. * gdb.c++/templates.exp: ditto. * gdb.base/break.exp: no run and hit main for stubs. Change line numbers for breakpoints and info breakpoint. * gdb.base/break.c: Add #ifdef usestubs for set_debug_traps() and breakpoint(). * gdb.base/callfuncs.c: ditto. * gdb.base/exprs: ditto. * gdb.base/interrupt.c: ditto. * gdb.base/opaque0.c: ditto. * gdb.base/printcmds.c: ditto. * gdb.base/ptype.c: ditto. * gdb.base/scope0.c: ditto. * gdb.base/setvar.c: ditto. * gdb.base/signals.c: ditto. * gdb.base/twice.c: ditto. * gdb.c++/misc.cc: ditto. * gdb.c++/templates.cc: ditto. Fri Mar 24 06:11:05 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * config/vx-gdb.exp, lib/gdb.exp: Regexp cleanups (\[(\] -> \\(, etc.). * gdb.base/a1-selftest.exp: Don't check for # followed by a digit somewhere between `read' and `main.c'. I'm pretty sure the pattern ".*#\[0-9\].*" was slowing down pattern matching a lot, and it isn't particularly useful. * gdb.base/scope.exp: Make test names unique. \[(\] -> \\(. Thu Mar 23 14:58:35 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/commands.exp (infrun_breakpoint_command_test): New test. Wed Mar 22 18:36:05 1995 Kung Hsu * config/mt-slite: add LIBS and -nostdlib. * config/slite-gdb.exp: add this new file to support sparclite target. Tue Mar 21 21:41:04 1995 Doug Evans * config/vx-gdb.exp (gdb_load): Update test of vxworks_ld return code. * gdb.base/a2-run.exp: Change argument to istarget from "*-*-vxworks" to "*-*-vxworks*". * gdb.base/{break.exp,default.exp,scope.exp}: Likewise. Tue Mar 21 17:08:47 1995 Kung Hsu * lib/gdb.exp: add proc runto_main, for targets that use stubs, this will not runto main but do a 'step' to step out of breakpoint(). * config/mt-slite: add -Dusestubs. Tue Mar 21 12:14:12 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/printcmds.exp (test_artificial_arrays): Send ^V@ instead of just @. * gdb.base/signals.exp: Add test for "handle all print". * TODO: Remove "handle all print". Also remove item about checking copyright date (I don't like the idea of a spurious FAIL based on when we run the tests). * gdb.base/recurse.exp: Enable test for SunOS4. xfail one test for SunOS4 (reason for failure not investigated). Remove redundant test for $binfile. * gdb.base/nodebug.c (array_index): Call malloc. * gdb.base/{corefile.exp,default.exp}: Make names of "up" tests unique. Mon Mar 20 10:08:17 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/recurse.exp: Update gdb_test invocation to use new conventions and slightly simplify the matching regexp. Fri Mar 17 05:43:28 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/break.exp: Update gdb_test invocation to use new convention. * lib/gdb.exp: If noargs is not set, set it to 0. * gdb.base/nodebug.exp: Comment out redundant test. Make name of tests unique. * lib/gdb.exp: Skip CHILL for AIX and Solaris. Thu Mar 16 16:27:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/nodebug.exp: It is OK if GDB thinks top and middle have one argument of type "". Wed Mar 15 15:54:56 1995 Stu Grossman (grossman@cygnus.com) * config/rom68k.exp: New file to support Motorola IDP board. * gdb.base/a2-run.exp: Skip this file if noargs is set. * gdb.base/break.c: Change things around so that this program doesn't depend upon args. This is necessary to make remote targets work (in general, they can't take args). * gdb.base/break.exp: Don't try to send args to program. Don't expect output. Also, replace lots of code with gdb_test. Wed Mar 15 04:11:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/printcmds.exp (test_character_literals_accepted): Test printing of '\'' (which is what the comment says we are testing, even though we were not), not '''. (test_integer_literals_rejected): Test that printing ''' is an error. * gdb.fortran/exprs.exp, gdb.fortran/types.exp, gdb.chill/chexp.exp, gdb.base/printcmds.exp, gdb.c++/cplusfuncs.exp, gdb.chill/callch.exp, gdb.chill/misc.exp, gdb.chill/pr-6292.exp, gdb.chill/string.exp, gdb.chill/tuples.exp: Use gdb_test not test_print_accept. * lib/gdb.exp: Remove test_print_accept. * gdb.base/signals.exp (signal_tests_1): Make pass message consistent with fail message. * gdb.base/whatis.exp: Remove xfails for printing char vs. unsigned char; the bug (PR 1821) is fixed. * gdb.base/scope.exp: Remove xfails for PRs 1843 and 1868. * gdb.base/scope.exp (test_at_localscopes): Call pass for successful tests--makes xfailing them work right. Tue Mar 14 07:39:19 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp (gdb_test): Between $pattern and $prompt, expect only \r\n, not .*. The test can pass .* as the last thing in $pattern if that is what it wants. In addition to providing this flexibility, this change should speed up pattern matching in cases where the pattern already ended with .* (there were a number of them). This change also helps catch bad patterns--in the old scheme the typo "char \*" instead of "char \\*" would pass. Now it is caught. * Many .exp files: Update callers. * gdb.base/funcargs.exp: Replace \[(\]+ with \\(. The latter is clearer and does not spuriously match multiple ('s. Likewise for ) and *. * gdb.base/nodebug.exp: Test ability to call a function and pass it a string (even with no debugging info). * gdb.base/printcmds.exp (test_integer_literals_rejected): Change "p '\'", which is the same as "p ''" once tcl gets done with quoting, to "p '\\'", which I suspect is what is intended (one backslash gets sent to GDB). * gdb.base/printcmds.exp (test_artificial_arrays): New tests. Fri Mar 10 13:31:46 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/a1-selftest.exp: Remove xfail for solaris. The bug (PR 1817) was fixed literally years ago. Fri Mar 10 02:49:40 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/funcargs.exp (call_after_alloca): Remove `next' test, it causes stepping out of call_after_alloca_subr with optimizing compilers. (localvars_in_indirect_call): Consume GDB prompt if `finish' fails. * gdb.c++/templates.exp: Source templ-info.exp only if the templates executable exists. * gdb.c++/misc.cc (class Contains_static_instance, class Contains_nested_static_instance), gdb.c++/classes.exp (test_static_members): Test printing of a class that contains a static instance of the class. Thu Mar 9 11:43:55 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/langs2.c (cppsub_): Don't prototype. * gdb.base/langs2.cxx (cppsub_): Fix prototype (cosmetic value only, I believe). Wed Mar 8 10:29:33 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp (skip_chill_tests): New procedure. * gdb.base/signals.exp (signal_tests_1): xfail for irix. Mon Mar 6 10:44:06 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.exp: Delete redundant ".*" at the beginning of each expect pattern. Cuts runtime from 12 to about 4 seconds. Thu Mar 2 05:31:34 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/langs.exp: Don't insist that foo__Fi be demangled. * gdb.disasm/hppa.exp (all_fpu_comparison_tests): Only disassemble 8, not 16, instructions for part 4. * config/vx-gdb.exp (gdb_start): Use \030, not \CX. tcl doesn't support the latter anymore. * gdb.base/Makefile.in: Try compiling callfuncs.c, if that fails try -DNO_PROTOTYPES. * gdb.base/callfuncs.c: Control use of prototypes based on NO_PROTOTYPES, not __STDC__. * gdb.base/callfuncs.exp (do_function_calls): xfail one of the t_float_values2 tests if prototypes in use. * gdb.base/callfuncs.c (t_float_values, t_float_values2, t_double_values): When checking differences against DELTA, check that difference is within the range (-DELTA,DELTA), not just (-infinity,DELTA). Tue Feb 28 16:28:54 1995 Kung Hsu * config/mips-gdb.exp (gdb_load): In every test case, we need to do 'file' command firts, then 'target', then 'load', this is due to gdb target set up. * config/mips-gdb.exp: Fix a couple regular exp bugs. Thu Feb 23 17:44:55 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.s (fmemLRbug_tests): Add tests for the indexing FP load/store variants. * gdb.disasm/hppa.exp (fmemLRbug_tests): Test new variants. Wed Feb 22 18:29:08 1995 Jim Kingdon * gdb.base/term.exp: Do not give a warning if not native, it is not an abnormal condition. Tue Feb 21 13:08:47 1995 Jim Kingdon * gdb.base/ptype.exp: Accept char[0] as well as char[] for "ptype t_char_array". Sun Feb 19 13:10:06 1995 Jim Kingdon * lib/gdb.exp (default_gdb_version): Pass GDBFLAGS to gdb when we are getting the version number. * gdb.base/{a1-selftest.exp,corefile.exp}: Do not give a warning if not native, it is not an abnormal condition. Thu Feb 16 15:56:56 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp: Just use "file exists", rather than undocumented dejagnu procedure "findfile". Thu Feb 16 10:30:24 1995 J.T. Conklin * config/mt-vxworks (CFLAGS): Set to -g -Dvxworks. (LDFLAGS): Set to -Xlinker -Ur. * Makefile.in, gdb.{base,c++,chill}/Makefile.in (GDB, GDBFLAGS): Removed, these values are set by lib/gdb.exp. * lib/gdb.exp: If GDBFLAGS is unset, set it to -nx. Wed Feb 15 14:23:28 1995 J.T. Conklin * config/vx-gdb.exp (spawn_vxgdb): Use default_gdb_start instead of replicating gdb startup code. * config/mt-vxworks (LDFLAGS): Set to -r. (CFLAGS_FOR_TARGET): Removed. * config/vx-gdb.exp: always set prompt; gdb.exp sets it to (gdb) and gdb for vxworks uses (vxgdb). * Makefile.in, gdb.{base,c++,chill}/Makefile.in (GDB): If a gdb executable is not in the tree and host != target, use sed and program_transform_name to determine the gdb name used by the target. * configure.in, gdb.{base,c++,chill}/configure.in: changed so *-*-vxworks* matches vxworks and *-*-netware* matches NetWare. Sun Feb 12 08:11:58 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/{callfuncs.exp,callfuncs.c}: Add tests for passing floats, chars, and shorts where there are ANSI-style function definitions. * gdb.base/langs.exp, gdb.base/langs*: New test. * gdb.base/Makefile.in: Build it. * TODO: Remove item about checking that C names don't get C++ demangling applied; this test tests it. Thu Feb 9 12:43:56 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.stabs/weird.exp: Remove "Haven't examined" comment which went with the const70 xfail. The xfail went away a year ago. * gdb.base/signals.exp: Rename a bunch of tests to give unique names. * gdb.base/corefile.exp: Give backtrace test unique name. xfail for hp300. * gdb.base/interrupt.exp: Also xfail hpux (for hp300). * gdb.base/a1-selftest.exp: Don't run on hp300. Sat Feb 4 15:04:32 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in (site.exp): Set host_alias and target_alias as well as host_triplet and target_triplet. Wed Feb 1 08:03:48 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/a1-selftest.exp: Invoke stty before starting inferior. * gdb.base/nodebug.exp: Add xfails for ultrix and irix5 (same places as other ecoff systems). * gdb.base/a1-selftest.exp (test_with_self): Don't invoke stty on ultrix. Mon Jan 30 11:44:52 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/nodebug.c (inner): Use variables so AIX linker doesn't remove them. * gdb.base/nodebug.exp: Accept "function" in addition to "text variable and "variable" in addition to "data variable". * gdb.base/nodebug.exp: xfail datalocal and bsslocal tests for AIX. * gdb.base/list.exp (test_forward_search): Set listsize to 4 not 2. * gdb.base/list1.c (long_line): Add additional statement at start of function. * gdb.base/list.exp (test_forward_search): Update line number to reflect new statement. Sun Jan 29 13:34:25 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/signals.exp: Reinitialize searched source directories after gdb_start call. Sat Jan 28 01:34:44 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/Makefile.in (clean): Delete "errs" file. * gdb.stabs/Makefile.in: Likewise. * gdb.disasm/hppa.exp (all_fpu_comparison_tests): Revert last change. Instead split the tests into smaller pieces. * gdb.disasm/hppa.s: Corresponding changes. Fri Jan 27 09:24:51 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/a1-selftest.exp (test_with_self), gdb.base/interrupt.exp: Quote ^C when passing it to stty. For some shells ^ is a pipe. * gdb.base/funcargs.exp: Modify many tests so that every test either passes or fails. Make some test names unique. Thu Jan 26 19:20:34 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/a1-selftest.exp (test_with_self), gdb.base/interrupt.exp: Call stty to set interrupt character. * gdb.disasm/hppa.mt (hppa), gdb.stabs/hppa.mt (weird.o): Check for HP assembler versus GNU assembler based on actual behavior of $(CC), rather than assuming that $(AS) is always the GNU assembler. * TODO: Suggest a few more stepping tests. Wed Jan 25 14:52:41 1995 Stan Shebs * gdb.base/default.exp: xfail no-stack backtraces for h8300, restart GDB for h8300 after a continue. (return): Add pattern to match a29k-udi behavior. * gdb.base/nodebug.exp: Remove obsolete comment. * gdb.base/regs.exp: New file, testing of register displays. * gdb.base/return.exp: Fix typo in reference to $objdir. * gdb.base/whatis.exp: Always start with a fresh GDB. Wed Jan 25 11:12:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.disasm/hppa.exp (all_fpu_comparison_tests): Set timeout higher, these tests generate a lot of output. Tue Jan 24 07:58:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp (gdb_test): Remove catch from around the send. The code following the catch silently ignored some errors; without the catch they should be thrown like any other tcl error. Also, the catch used "" instead of {} which meant all the callers who wanted to include one of the characters "[]$ had to quote it an extra time. * gdb.base/{callfuncs.exp,commands.exp,gdbvars.exp,printcmds.exp, ptype.exp,signals.exp,watchpoint.exp}, gdb.c++/{cplusfuncs.exp, demangle.exp}, gdb.chill/chexp.exp, gdb.fortran/exprs.exp: Remove extra quoting. Mon Jan 23 21:57:54 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/commands.exp: Make test names unique; every test either passes or fails. Update some comments. * gdb.disasm/hppa.exp (do_system_control_tests): Update. Sat Jan 21 15:34:52 1995 Jim Kingdon (kingdon@lioth.cygnus.com) The following fixes a FAIL caused by the fact that the alpha stabs configuration didn't use the ".if alpha" code in weird.def. * gdb.stabs/weird.def (v_comb): Use type attribute to specify 32 bit pointer, so the 32 bit version works even on the alpha. * gdb.stabs/{alpha.mt,ecoff.mt,aout.sed,hppa.sed,xcoff.sed,weird.def}: Remove the stuff which allowed us to have separate versions for alpha and everything else. * gdb.c++/cplusfuncs.exp (test_lookup_operator_functions): Fix regexp which "info func operator\[\](" is supposed to match. Fix string to send to GDB. Note that GDB still doesn't work right. Add a new test for "info func .perator\[\](" which GDB does handle correctly. * gdb.base/nodebug.exp: xfail most of the new tests for ecoff systems. Fri Jan 20 12:14:23 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.c++/classes.exp, gdb.c++/cplusfuncs.exp, gdb.c++/inherit.exp, gdb.c++/templates.exp, gdb.c++/virtfunc.exp, gdb.fortran/exprs.exp, gdb.fortran/types.exp, gdb.chill/chexp.exp, gdb.base/printcmds.exp: Remove passcount, failcount, etc., stuff; it makes the tests harder to understand and confuses test-o-matic. The preferred style is that each test provides a PASS or a FAIL, and has a unique message (e.g. "continue #54" not just "continue") which is the same for the pass and the fail. * gdb.fortran/exprs.exp, gdb.fortran/types.exp, gdb.chill/chexp.exp: Move test_print_accept and test_print_reject to lib/gdb.exp. * gdb.base/printcmds.exp: Use test_print_accept. Remove prt_accept which was basically the same thing. Likewise for test_print_reject and prt_reject. * lib/gdb.exp (test_print_reject): Add some more error message patterns to match from the former printcmds.exp (prt_reject). * gdb.c++/classes.exp, gdb.base/scope.exp: Remove spurious xfails. One defect of the passcount stuff is that some of it failed to report XPASS where appropriate. * gdb.c++/cplusfuncs.exp (print_addr_of): No longer accept extra stuff before and after arg in expected pattern. (test_paddr_operator_functions): Re-do test without print_addr_of; this is the only test which seems to want extra stuff there. Tue Jan 17 10:47:53 1995 Jim Kingdon * gdb.base/nodebug.exp: Update new tests to reflect improved wording of gdb output. * gdb.base/nodebug.exp: Add tests to check that "print", "whatis" and "ptype" work on variables in files compiled without -g. Replaces commented out "maint print msymbol" tests. Mon Jan 16 12:13:28 1995 Jim Kingdon * gdb.base/setvar.c (dummy): Call malloc. * gdb.stabs/aout.sed: Enclose comments within a sed command to avoid losing with the irix4 sed. * gdb.base/sigall.exp (test_one_sig): Add xfail for "get signal ALRM" on irix4. Sun Jan 15 21:58:26 1995 Jim Kingdon * TODO: Remove items about corefile.exp testing new exec-file and backtrace; both are now done. Add items about printing enums. Sat Jan 14 11:25:28 1995 Jim Kingdon * gdb.base/sigall.exp (test_one_sig): Attempt to recover if "get signal $thissig" test fails. * gdb.base/setvar.exp: Check for and reject crazy expected type hacks. Thu Jan 12 01:14:53 1995 Jim Kingdon * gdb.base/sigall.c (gen_*): Pass argument to handle_* to avoid compiler warning with dec alpha compiler. * gdb.base/commands.exp (if_while_breakpoint_command_test): Remove extra \n from gdb_test call (this explains why the prompt test that I removed yesterday was there). (user_defined_command_test): Remove extra \n and prompt test. * gdb.base/sigall.c: If SIGABRT == SIGLOST, just act as if SIGLOST doesn't exist. Likewise if SIGIO == SIGPOLL, pretend SIGPOLL doesn't exist. * gdb.base/sigall.exp: Remove special handling for SIGIO and SIGPOLL. Also remove alpha workaround, which turns out to be because SIGABRT == SIGLOST. * gdb.base/sigall.exp: Add workaround for alpha weirdness. * gdb.base/help.exp: Don't test "help show". Wed Jan 11 14:37:04 1995 Jim Kingdon * gdb.base/commands.exp: Call gdb_exit and gdb_start so that "set print address" is on. * gdb.base/commands.exp (if_while_breakpoint_command_test): Don't pass prompt to gdb_test; gdb_test already looks for the prompt. * gdb.base/help.exp: Replace most of docstring for "define" with ".*". * gdb.base/a1-selftest.exp: Don't test "maint dump-me". That test was a vestige of the manual TESTSTRATEGY, and the purpose of it was to make sure that gdb can read a core file. But (a) the "read the corefile" part didn't make it to a1-selftest.exp, we just delete the corefile after creating it, and (b) we test reading corefiles in corefile.exp anyway. Also, this test left around a xgdb process on Solaris. * gdb.base/corefile.exp: Also test backtrace. Wed Jan 11 00:14:40 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/commands.exp: Test a simple user defined command with arguments and if/while statements; verify the full user command is printed by "show user". * gdb.base/commands.exp: Test if/while commands as part of a breakpoint command list; verify they appear in breakpoint information. Wed Jan 11 00:47:58 1995 Jim Kingdon * gdb.base/sigall.c (gen_FPE): Generate SIGFPE with kill() rather than by dividing by zero. Tue Jan 10 21:38:05 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/watchpoint.exp: hppa*-*-*bsd* no longer has problems performing an inferior call with watchpoints enabled. * gdb.base/watchpoint.c (main): Delete second unnecessary read call. Tue Jan 10 18:42:07 1995 Jim Kingdon * gdb.stabs/weird.exp: Allow spaces followed by backspaces in echo of "file" command. * gdb.c++/classes.exp (test_ptype_class_objects, ptype class Foo): Add additional pattern for when "int operator int(void);" appears in a different order. Mon Jan 9 16:22:46 1995 Jim Kingdon * gdb.base/signals.exp: Call gdb_exit and gdb_start. * gdb.base/help.exp: Replace most of docstrings for "info signals" and "signal" with ".*". Wed Jan 4 11:35:19 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add note about "handle all nostop". * gdb.base/{sigall.c, sigall.exp}: New test. * gdb.base/Makefile.in: Add it. Thu Jan 5 17:34:03 1995 Stan Shebs * lib/gdb.exp, gdb.base/corefile.exp: Supply -nw as argument when invoking GDB, suppresses any windowing interface. Mon Jan 2 17:40:21 1995 Stan Shebs * config/sim-gdb: New file, simulator testing support. Wed Dec 28 12:21:50 1994 Jeff Law (law@snake.cs.utah.edu) * gdb.base/interrupt.exp: Test calling func1 twice. Wed Dec 21 12:51:37 1994 Jim Kingdon * gdb.base/list.exp (test_forward_search): Set timeout higher when we'll be getting lots of output from gdb. * gdb.base/a1-selftest.exp: Move code that was inside expect -re "init_malloc" to after the expect statement. Run it if that regexp is taken, but also for two others which happen if source cannot be found. Tue Dec 20 12:35:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/printcmds.exp: New test, for printing register before program is running. Mon Dec 19 00:32:55 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/list.exp: Correct some alternate expect patterns to reflect changes in list1.c. Sat Dec 17 14:20:03 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add item regarding large frames. * gdb.base/{funcargs.exp, funcargs.c} (call_after_alloca): New test. * TODO: Remove item about enabling return.exp; it is enabled. Suggest a few more "return" tests. Sat Dec 17 02:33:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.c++/misc.cc, gdb.c++/inherit.exp: Add testcases for anonymous unions. Tue Dec 13 11:26:00 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.chill/Makefile.in: Put all rule before rules for pr-4975.o and pr-5646.o, so "make" is the same as "make all", not "make pr-4975.o". Wed Dec 7 19:02:02 1994 Stan Shebs * gdb.base/list.exp: Adjust expectations to reflect changes in list1.c. (test_forward_search): New test proc. * gdb.base/list1.c (long_line): New function, has long source line. Thu Dec 1 23:14:49 1994 Stan Shebs * gdb.base/a1-selftest.exp: Change initial stepping to know about additional line of code that was added. Wed Nov 30 19:43:14 1994 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.s: Break the large branching tests into smaller tests so as not to overflow expect's input buffers. * gdb.disasm/hppa.exp: Corresponding changes. Fri Nov 25 13:37:10 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) Beginnings of template debugging tests. * gdb.c++/templ-info.cc: New file to test for template debugging capability of the compiler. * gdb.c++/Makefile.in: Add rule to build templ-info.exp from templ-info.cc. * gdb.c++/templates.cc: Add explicit template instantiations to enable compiling with -fno-implicit-templates. Add destructor and 'value' method to T5 class for template tests. * gdb.c++/templates.exp: Add testcases for printing of template types, setting breakpoints on template methods and calling a template method. Sat Nov 5 00:20:17 1994 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.exp (branch_tests): Allow any symbol as the branch target since some assemblers (gas-2.5) may emit a relocation for the branch instead of resolving it in the assembler. Sat Oct 29 02:40:40 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/a1-selftest.exp: Remove RS/6000 xfail for backtrace through signal handler. Fri Oct 21 11:10:16 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * configure.in (*-*-netware): Use config/mt-netware. * config/mt-netware: New file. * config/mt-i386-netware: Removed, separate configs for different netware architectures are no longer needed now that we have --with-headers. Sat Oct 15 03:43:00 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/exprs.exp: Remove xfail for alpha, it is fixed by the recent changes to use ANSI C arithmetic conversions. Sun Oct 9 07:44:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/corefile.exp: Add (xfail'd) test for reinit_frame_cache bug involving using inferior_pid to figure out whether to select a frame. Wed Sep 28 23:12:02 1994 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.exp: Change arg[0..3] to r[26..23] to match the current disassembler output. Fri Sep 16 11:42:41 1994 Stan Shebs (shebs@andros.cygnus.com) * gdb.fortran/exprs.exp: Expect VOID instead of void. * gdb.fortran/types.exp: Escape the expected '*'s in Fortran types, expect "int" as type of integer values (for now). Wed Sep 7 23:33:51 1994 Jeff Law (law@snake.cs.utah.edu) * gdb.base/commands.exp: New tests for if/while commands. Tue Sep 6 13:16:11 1994 Per Bothner (bothner@kalessin.cygnus.com) * lib/gdb.exp (runto): Replace sub-pattern for hex value by .*, since hex values have different syntax in Chill mode. Tue Sep 6 02:15:51 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.c++/demangle.exp (test_arm_style_demangling): Remove linefeed from expect pattern for repeated types with indices > 9. Mon Aug 29 14:20:44 1994 Stan Shebs (shebs@andros.cygnus.com) First part of Fortran test suite. * gdb.fortran: New directory. * gdb.fortran/exprs.exp, gdb.fortran/types.exp: New files. Sat Aug 27 23:32:43 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/default.exp: Update expect pattern for load command without arguments. Wed Aug 24 13:15:02 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * configure.in: Change i386 to i[345]86. * gdb.base/configure.in: Likewise. * gdb.c++/configure.in: Likewise. * gdb.chill/configure.in: Likewise. Tue Aug 23 19:14:06 1994 Stan Shebs (shebs@andros.cygnus.com) * lib/gdb.exp (gdb_run_cmd): Move comment out from between expect patterns, since that is not a valid context for comments. Fri Aug 19 15:07:30 1994 Kung Hsu (kung@mexican.cygnus.com) * gdb.c++/demangle.exp (test_arm_style_demangling): Add tests for repeated types and repeated types with indices > 9. Tue Aug 16 15:57:52 1994 Stan Shebs (shebs@andros.cygnus.com) * gdb.base/printcmds.exp: Remove all the a29k XFAILs tagged with 2417; old bug has been fixed. Fri Aug 12 19:35:41 1994 Jeff Law (law@snake.cs.utah.edu) * gdb.base/interrupt.exp: When trying to wake up the inferior, send the newline ourselves instead of assuming gdb_test will do so when passed an empty input string. * gdb.stabs/hppa.mt: Use $(AS), not $(CC) to assemble the stabs testcode. Fri Aug 5 17:01:07 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * lib/gdb.exp (gdb_test): Don't send anything if the first argument is an empty string. This makes cases where we want to match output that is already in expect's buffers (for example, matching a breakpoint after gdb_run_cmd has been called) work reliably. Tue Aug 2 10:24:08 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * config/netware.exp: New file. Thu Jul 28 12:54:07 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * config/mt-slite (LDFLAGS): If using the newlib in the tree, set the -B and -L prefixes so we can find the debugging stub. * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Use newlib if it is there and we are using the gcc from the tree. * gdb.base/types.c: Removed. * gdb.base/configure.in: Look for makefile fragments in ../config. Recognize i386-*-netware. * gdb.c++/configure.in: Likewise. Mon Jul 25 23:48:50 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/corefile.exp: Change `else if' to `elseif', which is the correct TCL syntax. Mon Jul 25 15:35:56 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * gdb.base/opaque.exp: use runto instead of messing around with breakpoints. Simplify by using gdb_test. * gdb.base/bitfields.exp: restart between tests on netware targets because breakpoints aren't relocated after target death. Run processes to completion. * gdb.base/{opaque,watchpoint}.exp: Use gdb_run_cmd. Sun Jul 24 09:55:51 1994 Fred Fish (fnf@cygnus.com) * Makefile.in: Remove extra tabs that confuse some versions of "make". Use the newly built gdb to test with by default, rather than the first one in the tester's search path. Sat Jul 23 15:05:47 1994 Stan Shebs (shebs@andros.cygnus.com) * gdb.base/whatis.exp (v_signed_short_array): Fix a typo. * gdb.base/help.exp: Update expected add-symbol-file, ignore, and condition help. Tue Jul 19 10:26:32 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * lib/gdb.exp (runto): Rewrite in terms of gdb_run_cmd. * lib/gdb.exp (gdb_run_cmd): New function, used to start program running. * gdb.base/bitfields.exp: Use gdb_run_cmd to start program. * gdb.base/funcargs.exp: Likewise. * gdb.base/bitfields.exp: Simplify by using gdb_test. * gdb.base/funcargs.exp: Likewise. * lib/gdb.exp (gdb_test): if match times out, don't call fail if message is "". Mon Jul 18 12:18:07 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * gdb.base/{a2-run,callfuncs,funcargs,interrupt,mips_pro,nodebug, return,signals,twice}.exp: Handle non-existant binaries consistantly. * gdb.base/corefile.exp: Execute coremaker to generate core dump. * gdb.base/Makefile.in: Don't try to generate a core dump, we might testing a cross development system. Thu Jul 14 18:13:56 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * Makefile.in (RUNTEST_FOR_TARGET): Fix relative pathname, the runtest script is relative to ${srcdir}, not ${rootdir}. Thu Jul 14 14:56:59 1994 Stan Shebs (shebs@andros.cygnus.com) * gdb.base/signals.exp: Allow for optionality of breakpoint address. Thu Jul 14 11:21:27 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/{ptype.exp,ptype.c}: Add t_char_array test. Tue Jul 12 12:22:32 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * gdb.c++/cplusfuncs.cc: Include , not , for size_t definition. * gdb.c++/templates.cc: Likewise * config/mt-i386-netware: New file. * gdb.base/interrupt.c: Do not test if errno == EINTR if it's not defined. * gdb.base/Makefile.in: Added support for systems that name core files by appending "core" to the program name. * gdb.base/a1-selftest.exp: Likewise. Mon Jul 11 23:59:18 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/return.exp: Add comment and message for `return double' test failure on Sparc Solaris. Mon Jul 4 12:10:48 1994 Stan Shebs (shebs@andros.cygnus.com) * lib/gdb.exp (runto): Allow for optionality of breakpoint address. Wed Jun 29 00:26:17 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.c++/misc.cc: Instantiate classes to inhibit the compiler from optimizing them away. * gdb.c++/classes.exp, gdb.c++/inherit.exp: Update ptype expect patterns to include default constructors and assignment operators, to match gcc versions beyond 2.5.8. Accept any cplus demangling character in the output of the virtual base pointer. Fri Jun 24 08:15:42 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.c++/cplusfuncs.exp: Use string_to_regexp and a regular expression match in print_addr_of to avoid unintented matches. * gdb.c++/virtfunc.exp: Accept alternate ptype output of g++ versions up to 2.5.8. Mon Jun 20 23:54:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/list.exp: Tweak alternate pattern for listing of an included file to run under newer versions of expect. * gdb.c++/demangle.exp: Add spaces to the expect patterns between consecutive >'s in templates to accomodate recent cplus-dem.c change. Remove xfail for the virtual table of BDDHookV. Sat Jun 18 12:51:34 1994 Stan Shebs (shebs@andros.cygnus.com) * lib/gdb.exp (string_to_regexp): Set a default result. (default_gdb_start): Fix misleading message. Wed Jun 15 12:10:10 1994 Stan Shebs (shebs@andros.cygnus.com) * config/mt-a29k-udi, config/mt-i960-nindy, config/mt-sparc-aout: Remove all CC, etc definitions. * config/mt-hpux: New file. * config/mt-mips-ecoff (CFLAGS_FOR_TARGET): Remove: (CFLAGS, LDFLAGS): Define. * config/mt-slite (CFLAGS_FOR_TARGET): Change to LDFLAGS. * Makefile.in (site.exp): Don't insert host_os, etc. (just-check): Just use RUNTEST with RUNTESTFLAGS only. (distclean): Check existence of subdir. * gdb.base/configure.in (hppa*-*-hpux*): Recognize. * gdb.base/Makefile.in: General cleanup and simplification. Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions to build executables. Use default rule to build .o files. (EXPECT, RUNTEST, CC): Fix relative pathname. (site.exp): Don't insert host_os, etc. * gdb.base/signals.c (main): Don't call signal unless SIGALRM and/or SIGUSR1 defined. * gdb.base/watchpoint.c: Don't include stdio.h a second time. * gdb.c++/Makefile.in: General cleanup and simplification. Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions (CFLAGS): Remove. (EXPECT, RUNTEST_FOR_TARGET, CXX): Fix relative pathname. Fri Jun 10 10:55:09 1994 Jeff Law (law@snake.cs.utah.edu) * gdb.base/recurse.exp: Misc changes to get tests running again after Kung's changes to the watchpoint code. * gdb.base/watchpoint.exp: Likewise. Thu Jun 9 15:16:55 1994 Per Bothner (bothner@kalessin.cygnus.com) * lib/gdb.exp (string_to_regexp): Convert {\} also. Wed Jun 8 12:12:17 1994 Stan Shebs (shebs@andros.cygnus.com) * config/udi-gdb.exp, config/unix-gdb.exp: Call default_gdb_start. * lib/gdb.exp (default_gdb_start): Define. * gdb.base/bitfields.exp, gdb.base/break.exp, gdb.base/exprs.exp, gdb.base/funcargs.exp, gdb.base/opaque.exp, gdb.base/printcmds.exp, gdb.base/ptype.exp, gdb.base/recurse.exp, gdb.base/scope.exp, gdb.base/setvar.exp, gdb.base/watchpoint.exp, gdb.c++/classes.exp, gdb.c++/misc.exp, gdb.c++/virtfunc.exp: Don't call gdb_target_udi in between tests. Tue Jun 7 08:30:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.c++/demangle.exp: Use gdb_test_exact, rather than demangle (which was basically just a local version of the same thing). In addition to avoiding duplication, gdb_test_exact is faster. * lib/gdb.exp (gdb_test_exact): Fix typo. * lib/gdb.exp (delete_breakpoints): If there were no breakpoints, don't give an error. * gdb.base/term.exp: Call delete_breakpoints before starting. * gdb.base/Makefile.in (EXECUTABLES): Remove t10. (t10): Add comment. Mon Jun 6 18:26:50 1994 Stan Shebs (shebs@andros.cygnus.com) Reorganization of the GDB Test Suite. * gdb.base: New directory, contains all the basic tests. * gdb.c++: New directory, tests specific to C++. * gdb.chill: New directory, tests specific to Chill. * gdb.t00, gdb.t01, gdb.t02, gdb.t03, gdb.t04, gdb.t05, gdb.t06, gdb.t07, gdb.t08, gdb.t09, gdb.t10, gdb.t11, gdb.t12, gdb.t13, gdb.t15, gdb.t16, gdb.t17, gdb.t20, gdb.t21, gdb.t22, gdb.t23, gdb.t24, gdb.t30, gdb.t31: Removed directories, contents moved into appropriate new directories (t00-t17 to base, t20-t23 to c++, t30-31 to chill). * */gdbme.*: Rename to match appropriate expect scripts. * gdb.base/bitfields.c, gdb.base/break.c, gdb.base/callfuncs.c, gdb.base/coremaker.c, gdb.base/exprs.c, gdb.base/funcargs.c, gdb.base/interrupt.c, gdb.base/list0.c, gdb.base/list0.h, gdb.base/list1.c, gdb.base/mips_pro.c, gdb.base/nodebug.c, gdb.base/opaque-info.c, gdb.base/opaque0.c, gdb.base/opaque1.c, gdb.base/printcmds.c, gdb.base/ptype.c, gdb.base/recurse.c, gdb.base/return.c, gdb.base/run.c, gdb.base/scope0.c, gdb.base/scope1.c, gdb.base/setvar.c, gdb.base/signals.c, gdb.base/types.c, gdb.base/twice.c, gdb.base/watchpoint.c, gdb.base/whatis-info.c, gdb.base/whatis.c: New names of C files. * gdb.c++/cplusfuncs.cc, gdb.c++/templates.cc, gdb.c++/misc.cc, gdb.c++/virtfunc.cc: New names of C++ files. * gdb.chill/chillvars.ch: New name of Chill file. * gdb.base/configure.in, gdb.c++/configure.in, gdb.chill/configure.in: Merge in contents of gdb.t*/configure.in. * gdb.base/Makefile.in, gdb.c++/Makefile.in, gdb.chill/Makefile.in: Merge in contents of gdb.t*/Makefile.in. * configure.in (configdirs): Update to reflect directory changes. (target_abbrev): No longer define for any configuration. * Makefile.in: Cosmetic improvements to header comments. Fri Jun 3 18:56:06 1994 Per Bothner (bothner@kalessin.cygnus.com) Various changes to gdb.t31: * Makefile.in (gdbme.o): Compile with -fspecial_UC. * gdbme.ch: Make all key-words and predefineds be upper-case. * chillvars.exp: Expect key-words and predefinds in upper-case. * chillvars.exp: Use gdb_test_exact many places. Change expected output for arrays (which now includes index labels). * pr-5020.exp, gdme.ch (module PR_5020): New test, for PR-5020. Thu Jun 2 16:02:41 1994 Per Bothner (bothner@kalessin.cygnus.com) * lib/gdb.exp (string_to_regexp, gdb_test_exact): New procedures. * Makefile.in (CHILL_LIB): Remove bogus redundant definitions. Sun May 29 22:31:42 1994 Per Bothner (bothner@kalessin.cygnus.com) * Makefile.in: Fix bit-rot in definitions of CHILL, CHILL_FOR_TARGET and Chill_LIB. * gdb.t31/gdbme.ch: Fix syntax of nested array tuples. * gdb.t31/Makefile.in: Add definitions for CHILLFLAGS, CHILL, and CHILL_LIB. Sat May 21 10:05:08 1994 Bill Cox (bill@rtl.cygnus.com) * Revert the previous changes. Please see Rob's directory /lisa/test/rob/progressive/gdb/testsuite for these fixes. Thu May 19 12:51:00 1994 Bill Cox (bill@rtl.cygnus.com) * Makefile.in, configure.in, config/mips-gdb.exp, config/mt-a29k-udi, config/mt-i386-aout, config/mt-i960-nindy, config/mt-sparc-aout, config/udi-gdb.exp, config/unix-gdb.exp, config/unknown.exp, gdb.t00/default.exp, gdb.t00/help.exp,, gdb.t00/teststrategy.exp, gdb.t01/Makefile.in, gdb.t02/Makefile.in, gdb.t02/whatis.exp, gdb.t03/Makefile.in, gdb.t03/gdbme.c, gdb.t04/Makefile.in, gdb.t05/Makefile.in, gdb.t06/Makefile.in, gdb.t06/break.exp, gdb.t06/signals.c, gdb.t06/signals.exp, gdb.t08/Makefile.in, gdb.t08/opaque.exp, gdb.t09/Makefile.in, gdb.t10/Makefile.in, gdb.t11/Makefile.in, gdb.t12/Makefile.in, gdb.t13/Makefile.in, gdb.t15/Makefile.in, gdb.t15/funcargs.exp, gdb.t15/gdbme.c, gdb.t15/return.exp, gdb.t16/Makefile.in, gdb.t17/Makefile.in, gdb.t17/callfuncs.exp, gdb.t17/gdbme.c, gdb.t20/Makefile.in, gdb.t21/Makefile.in, gdb.t21/cplusfuncs.exp, gdb.t22/Makefile.in, gdb.t22/virtfunc.exp, gdb.t23/Makefile.in, gdb.t24/demangle.exp, lib/gdb.exp: Check in Rob's testing changes from 94Q1. Wed May 18 17:04:03 1994 Bill Cox (bill@rtl.cygnus.com), * config/mt-lynx, config/mt-m68k, config/mt-mips-ecoff, config/mt-slite, config/mt-unix, config/mt-vxworks: Add Rob's new testing fragments. Tue May 17 15:04:14 1994 Bill Cox (bill@rtl.cygnus.com) * config/mips-gdb.exp, config/udi-gdb.exp, config/vx-gdb.exp, lib/gdb.exp: Replace error proc calls with perror. Mon May 16 19:00:50 1994 Stan Shebs (shebs@andros.cygnus.com) * gdb.t00/teststrategy.exp: Reorder so that AIX gdb can print the version also, match on casted version strings, and match on gdb startup case where the line numbers might be messed up. Fri May 13 18:00:27 1994 Bill Cox (bill@rtl.cygnus.com) * config/mt-i960-vx (LDFLAGS): Add '-r' option for test links. (CFLAGS): Delete it from here. Tue May 3 16:08:09 1994 Kung Hsu (kung@mexican.cygnus.com) * gdb.t22/virtfunc.exp: Fix g++ ptype expected outputs. Fri Apr 29 14:26:35 1994 Stan Shebs (shebs@andros.cygnus.com) * Makefile.in (RUNTEST): Default to just "runtest". Tue Apr 26 22:21:40 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.t17/callfuncs.exp: More comments about t_func_values tests. * gdb.t17/gdbme.c (t_func_values): Add comments about how and why the code has been restructured. Thu Apr 21 12:48:07 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/default.exp (set write): Allow any number of \r and/or \n, not just one of each. * gdb.t07/gdbme.c (main): Don't take address of an array; SunOS4 /bin/cc gives a warning if you do. Thu Apr 21 11:54:04 1994 Kung Hsu (kung@mexican.cygnus.com) * gdb.t24/demangle.exp: change expect pattern of __t10ListS_link1ZUiRCUiPT0 Wed Apr 13 15:05:00 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.t07/{recurse.exp, recurse.c}: New tests for watchpoints on local variables in recursive functions. * gdb.t07/Makefile.in: Build the new test. Tue Apr 12 20:45:25 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.t17/gdbme.c (t_func_values): Do not compare function pointers directly. Instead compare the return values from actual calls. Mon Apr 11 10:31:00 1994 Bill Cox (bill@rtl.cygnus.com) * Makefile.in (check): Set TCL_LIBRARY for runtest. Mon Apr 11 09:15:30 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * From Peter Schauer with minor modifications. * gdb.t15/return.exp (return_tests): Handle targets where "return" stops in mid-line in the caller. Add xfail for returning a float value on X86 targets. Tue Apr 5 15:16:33 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.exp (fcmp_tests): Break up into two halves to avoid expect lossage. (fmem_LRbug_tests): Likewise. * gdb.disasm/hppa.s: Corresponding changes. * gdb.disasm/hppa.exp: Rework escape sequences and end-of-line conditions to work with latest dejagnu/expect. * gdb.t15/funcargs.exp (finish from indirect call): No longer expected to fail on the PA. (backtrace in call with trampolines): Explicitly require main to be frame #1 (no trampolines should show up in backtrace). * gdb.t00/default.exp: Use "exp_continue" rather than obsolete "continue -expect". * gdb.t06/break.exp: Likewise. * gdb.t07/watchpoint.exp: Likewise. * gdb.t13/bitfields.exp: Likewise. * gdb.t15/{funcargs,return}.exp: Likewise. * gdb.stabs/weird.exp: Likewise. * config/{mips,udi}-gdb.exp: Likewise. * hppa.sed: Enclose comments within a sed command to avoid losing with the old OSF1 sed. Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t02/whatis.exp, gdb.t08/opaque.exp: Add XFAILs for sequent dynix. * gdb.t06/signals.exp: Add clear_xfail for sequent dynix. * gdb.t15/funcargs.exp: Conditionally step again to really finish from marker_call_with_trampolines. Handle the case where the first step from within call_with_trampolines already steps us back to main. * gdb.t15/gdbme.c: Add comment to closing brace of call_with_trampolines for funcargs.exp. Tue Mar 29 23:55:27 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.t07/watchpoint.exp (test_watchpoint_triggered_in_syscall): Fix typo(s). Sun Mar 27 16:53:14 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.t07/gdbme.c: More code for watchpoint testing. * gdb.t07/watchpoint.exp: Accept both "Watchpoint" and "Hardware watchpoint" throughout file. (test_watchpoint_triggered_in_syscall): New test. (test_complex_watchpoint): New test. Fri Mar 25 17:05:31 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdbme.c (call_with_trampolines): New function to try and step into. Tests trampoline problems on the PA. * funcargs.exp (localvars_in_indirect_call): No longer expect stepping into indirect call to fail on PAs. (test_stepping_over_trampolines): New test. Wed Mar 23 07:43:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add suggestions for static member function tests, and completion tests. Wed Mar 16 08:28:28 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add suggestions for "p/a" tests. * lib/gdb.exp: Set prompt to (gdb) if it isn't already set. (default_gdb_exit): Replace all the hair with sending "quit" to the process with a simple close. Tue Mar 15 08:45:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add suggestions for shared library tests. Sun Mar 13 10:45:22 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add suggestions for x/s tests. Fri Mar 11 08:22:00 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/help.exp: Replace most of docstrings for "tbreak", "enable once", and "enable breakpoints once" with ".*". Thu Mar 10 08:34:27 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add suggestions about structure passing tests. Mon Mar 7 13:45:54 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t03/gdbme.c: gcc version 1 puts out the wrong stabs for the primary1 test, use work around if __GNUC__ < 2. * gdb.t06/signals.c: Add comments for signals.exp pattern matching. * gdb.t06/signals.exp: Add XFAILs for i386 bsd and vax ultrix. Test for bad output rather than waiting for timeout. Issue second continue only if first continue failed. Wed Mar 2 10:08:01 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * gdb.t21/cplusfuncs.exp (test_paddr_operator_functions): Do operator[] test with gdb_test because the old code didn't seem to be getting the quoting right with the new dejagnu. Thu Feb 24 19:49:25 1994 Rob Savoye (rob@poseidon.cygnus.com) * lib/gdb.exp: Set GDB to a fresh gdb if there is one, else use one from the path. * Makefile.in: Use a fresh expect if there is one, use runtest from the src tree if there is one. Thu Feb 24 18:49:37 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * gdb.t06/break.exp (test_next_with_recursion): Remove xfail for next over recursive call. Revise the tests from that point on (which had been skipped) to match GDB's actual (correct) output. * gdb.t07/watchpoint.exp (test_stepping): Remove xfail for bug with next over a breakpoint whose condition is false. * gdb.t00/help.exp: Comment out "help set print" tests just like (and for same reason as) "help set" test. Mon Feb 14 09:58:23 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.s (fmemLRbug_tests): New tests. * gdb.disasm/hppa.exp (fmemLRbug_tests): Run them. Sun Feb 6 15:36:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/break.exp (test_next_with_recursion): Remove no longer necessary gdb_target_udi. * gdb.t03/ptype.exp: For UDI, skip tests which call malloc. * gdb.t02/whatis.exp, gdb.t03/ptype.exp: Remove xfails for PRs 1838 and 2417; they are fixed. * gdb.t02/whatis.exp (v_char_array, v_signed_char_array), gdb.t03/ptype.exp (ptype structure, ptype union): Remove xfails; the test is looser than when the xfails were added. * gdb.t00/{help.exp,default.exp}: Don't test "target remote" on UDI. * gdb.t00/help.exp: Don't expect remote to be in "help target" output. * gdb.t01/run.exp: Only run shell test if isnative. * config/udi-gdb.exp (gdb_load): Use "file", not "load" command, since "run" automatically loads if necessary. Call gdb_target_udi after the "file" since "file" kills any execution target. * config/udi-gdb.exp (gdb_start): Don't send "set args main" to GDB. GDB doesn't work that way (not anymore at least) on UDI. * gdb.t01/run.exp, gdb.t06/break.exp: Don't pass extra first argument for UDI. Fri Feb 4 12:19:32 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * gdb.t17/interrupt.c: If we get EINTR, don't print an error message. * gdb.t17/callfuncs.exp: Add xfails for rs6000. Sat Feb 5 09:11:56 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t24/demangle.exp: Re-write demangle to just call gdb_test, properly quoting regexps. This makes the second argument to demangle a fixed string, which matches the callers, instead of a shell-style pattern which is what the previous implementation used. Update some of the callers. Sat Feb 5 10:19:09 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.s (comib_tests): Add missing instruction. (comib_nullified_tests): Fix typo. * gdb.disasm/hppa.exp (all comb tests): Fix thinkos in expect strings. No longer expected to fail. * gdb.disasm/hppa.s (addib_tests): Fix typo. * gdb.disasm/hppa.exp (all addb tests): Fix thinkos in expect strings. No longer expected to fail. * gdb.disasm/hppa.exp (fmpy_addsub_tests): Fix typo in expect string. No longer expected to fail. Fri Feb 4 23:45:11 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.exp (fcmp_tests): Fix thinko in expect string. No longer expected to fail. * gdb.disasm/hppa.exp (xmpyu_tests): Fix buglet in expect string. No longer expected to fail. Fri Feb 4 10:35:42 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t24/demangle.exp: Remove a bunch more tests which differ only in the names (I probably got most of them). I was even generous with some which differed in underscores in names, and probably missed a few, and I *still* was able to remove almost a third of the file with almost no impact on testsuite coverage. Thu Feb 3 12:04:49 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/default.exp: Match udi_attach error message as well as the one from child_attach. * gdb.t00/default.exp: Use "." instead of "?" to match a question mark. * gdb.stabs/weird.exp: Remove xfail for const70; just fixed in GDB. * gdb.stabs/weird.def (bad_neg0type): Size of this type is 16, not 8. * gdb.stabs/weird.exp: Remove xfail for "p bad_neg0"; this fixes it. * Move test with enums and partial symbols back to gdb.t03/{ptype.exp,gdbme.c} from gdb.stabs/{weird.def,weird.exp}. Reverts the change of 26 May 93. Per today's change to stabs.texinfo, the behavior that weird.exp was expecting was unreasonable; what is important is that the compiler+gdb get things right, which happens with a recent gcc. Also fix the test to deal with native compilers which put out the stab gdb can't deal with. Mon Jan 31 15:40:11 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t24/demangle.exp: Remove a bunch of tests which differ only in the names. The main thing these accomplish is to slow things down. Many more such duplicates surely remain. * gdb.t00/help.exp: Comment out "help support" test just like (and for same reason as) "help set" test. Mon Jan 31 06:43:45 1994 Fred Fish (fnf@cygnus.com) * gdb.t06/break.exp: Remove setup_xfails for sparc-sun-solaris2.*, these tests now pass with latest gcc and gdb. * gdb.t20/inherit.exp (test_ptype_si): Update warning message about known bug in gcc to include up through 2.5.8. * gdb.t20/inherit.exp (test_ptype_vi): Accept "_vb." as well as well as "_vb$". * gdb.t21/cplusfuncs.exp (test_lookup_operator_functions): Remove setup_xfails for sparc-sun-solaris2.*, these tests now pass with latest gcc and gdb. * gdb.t22/virtfunc.exp (test_ptype_of_classes): Accept "_vb." as well as "_vb$". Sat Jan 29 23:31:26 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * configure.in (hppa*-*-*): Also configure and build stabs-only tests. Thu Jan 27 08:21:16 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.t10/hppa.mt: A makefile fragment for the PA. * gdb.t10/configure.in (hppa*-*-*): Use it. Tue Jan 25 12:58:26 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t09/corefile: Increase timeout when spawning gdb explicitly. Wed Jan 19 12:40:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t06/signals.exp: Handle blocked SIGTRAP on sun3 for bash versions prior to 1.13.5. Tue Jan 18 20:10:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/default.exp (show prompt): In FAIL case, only match if the prompt is at the start of a line. Mon Jan 17 20:07:51 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.s: Add new tests for sfu and copr instructions. Enable "diag" instruction. Delete copr from fpu_misc_tests, it's in the copr tests now. * gdb.disasm/hppa.exp: Run new sfu and copr tests. Do not expect copr in the fpu_misc tests anymore. fpu_misc tests are no longer expected to fail. Fri Jan 14 14:24:21 1994 Rob Savoye (rob@darkstar.cygnus.com) * gdb.t00/teststrategy.exp, gdb.t07/watchpoint.exp, gdb.t31/chillvars.exp, lib/gdb.exp: Tweak to run under either version of expect. * lib/gdb.exp (default_gdb_exit): Remove "catch" statement. * gdb.t00/teststrategy.exp: Use isnative and verbose procedures. * gdb.t11/list.exp: Remove extraneous whitespace. Sat Jan 15 09:57:22 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t16/printcmds.exp (test_print_strings): Accept "(unsigned char *) " before the string. * TODO: Add notes about printing of fancy types and GDB expressions. Thu Jan 13 17:16:09 1994 Stan Shebs (shebs@andros.cygnus.com) * Makefile.in: Pass LDFLAGS and LIBS to sub-makes. * gdb.t06/configure.in: Don't try to compile signals test program if doing mips-idt-ecoff. Thu Jan 13 08:25:55 1994 Rob Savoye (rob@darkstar.cygnus.com) * Most .exp files: Tweak to run under either version of expect. Tue Jan 11 15:21:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t12/scope.exp: Add xfails for rs6000. Remove 1806 from existing xfails; I'm not sure why they are failing, but not because of PR 1806. Mon Jan 10 22:14:20 1994 Rob Savoye (rob@darkstar.cygnus.com) * config/unix-gdb.exp: Remove gdb_unload cause it's already defined in lib/gdb.exp. Fri Jan 7 12:42:45 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t07/watchpoint.exp: Clear xfail for calling function with watchpoint enabled on mips, CALL_DUMMY_BREAKPOINT_OFFSET got defined. * gdb.t20/gdbme.cc, gdb.t21/gdbme.cc: Conversion operator functions have to be typeless. Tue Jan 4 09:32:22 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add suggestion for copyright year test. Mon Jan 3 11:35:26 1994 Stan Shebs (shebs@andros.cygnus.com) * configure.in (*-*-lynxos*): Add stabs tests. Wed Dec 1 21:54:05 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.stabs/hppa.sed: Only lables should ever start in column zero, so insert a tab before any assembler directive in column zero. * gdb.disasm/hppa.exp (all_fpu_memory_tests): Test FP quadword stores. * gdb.disasm/hppa.s (fpu_memory_indexing_tests): Add FP quadword stores. (fpu_short_memory_tests): Likewise. Mon Nov 22 13:23:22 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.stabs/ecoff.mt: Delete alpha specific if block, fix typo. * gdb.stabs/ecoff.sed: Escape inserted blanks with backslashes, embed .stabs directives in comments. Fri Nov 19 14:09:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: New file, describing tests we could write. * gdb.t09/corefile.exp: Move description of tests to write to TODO. Tue Nov 16 21:07:44 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/signals.exp: Add kludge to force re-sync. * gdb.t00/teststrategy.exp: If we accidently send the "maint dump-me" to xgdb instead of gdb, get out of gdb. Tue Nov 16 10:21:57 1993 Rob Savoye (rob@cygnus.com) * lib/gdb.exp: Make GDB and GDBFLAGS global so the scoping work for info. Sat Nov 13 23:17:48 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.stabs/hppa.mt: A makefile fragment for the PA. * gdb.stabs/configure.in (hppa*-*-*): Use it. * gdb.stabs/hppa.sed: New sed script for the PA. Sat Nov 13 22:50:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.stabs: Re-write weird.def and configuration to use sed instead of cpp. sed is portable and POSIX; cpp is neither. Fri Nov 12 15:26:36 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/signals.exp: Remove one sun3 XFAIL which has been fixed. Mon Nov 8 16:55:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t20/gdbme.cc: Add comment about pmi being optimized out. Thu Nov 4 23:07:59 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.stabs/weird.exp, gdb.t22/virtfunc.exp: Accept "_vb." as well as "_vb$". * gdb.t00/teststrategy.exp: Add xfail for RS/6000. * gdb.t03/ptype.exp: Add comments and messages about FAILs with xlc. Wed Nov 3 13:53:34 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp: Comment out code which depends on non-existent `transform' procedure. Wed Nov 3 11:23:11 1993 Rob Savoye (rob@darkstar.cygnus.com) * lib/gdb.exp (default_gdb_exit): Remove `catch "close"'. * lib/gdb.exp: Transform tool name. * gdb.t*/*.exp: Change error to perror so it works with DejaGnu 1.1's new error handling system. Mon Nov 1 10:36:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in, gdb.t2*/Makefile.in: Add -O to CXXFLAGS. Fri Oct 29 17:58:14 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/default.exp: Avoid tests with a lot of .* in them. They made pattern matching so slow that timeouts happened on heavily loaded systems. Now any output from "show print" which gets us back to the GDB prompt is a PASS. Mon Oct 25 14:36:50 1993 Stu Grossman (grossman at cygnus.com) * gdb.disasm/hppa.mt: Use $(srcdir) in hppa.o make rule. Mon Oct 25 13:35:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/signals.exp: Skip whole file with xfail for HPPA. * gdb.t24/demangle.exp: Remove "3220" from the one remaining xfail. It is not from PR 3220. Sun Oct 24 18:49:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/{help.exp,default.exp}: Loosen up a few more tests which just started failing because they depended on the order the subcommands are presented, or exact docstring text. This kind of test is a pain and has minimal benefit. Thu Oct 21 08:26:48 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t09/corefile.exp: At end of test, use "core" command with no arguments. Wed Oct 20 08:56:02 1993 Stu Grossman (grossman at cygnus.com) * gdb.t{01 02 03 04 05 06 07 08 09 10 11 12 13 15 16 17}/Makefile.in: Make it possible to run the testsuite with Sun make and CC = cross gcc by adding explicit build rules for .o files. Tue Oct 19 14:57:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t15/funcargs.exp: Don't put comments on same line as setup_xfail (@#$*%& tcl braindamage!). Mon Oct 18 21:50:08 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.disasm/hppa.exp: Use $objdir/$subdir/$binfile not just $binfile. Fri Oct 15 15:39:54 1993 Kung Hsu (kung@cirdan.cygnus.com) * gdb.t20/classes.exp: 'const xxx &' becomes 'xxx const &'. * gdb.t20/inherit.exp: remove three dumplicate entries. Fri Oct 15 13:45:25 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t06/break.exp: For "next over recursive call", fail on any incorrect output, not just on "factorial (value=2)". Fri Oct 15 11:52:56 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t12/scope.exp: Remove xfails, filename::var syntax should be working now. Add an xfail if accesing a bss variable causes a memory error if the target is not yet run. Thu Oct 14 19:16:56 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t24/demangle.exp: Clean up spacing (2 strings), inclusion of constructor name (2 string), name of _GLOBAL_ demangling (2 strings), name of __st* demangling (2 strings). Did Kung really get the more than 95 others right without testing them? Thu Oct 14 16:27:08 1993 Kung Hsu (kung@cirdan.cygnus.com) * gdb.t24/demangle.exp: clean up XFAILS, more than 100 Thu Oct 14 11:40:30 1993 Jeffrey Law (law@cs.uah.edu) * configure.in (configdirs): Add gdb.disasm * gdb.disasm: New directory for GDB disassembler tests. * gdb.disasm/hppa.{exp,s,mt}: Disassembly tests for the HPPA. Thu Oct 14 11:40:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/help.exp: Don't test "help set". * gdb.t20/inherit.exp, gdb.t22/virtfunc.exp: Remove all xfails from within expect statements. None of these happen anymore and they cause regressions to be silently unnoticed. * gdb.t20/inherit.exp, gdb.t22/virtfunc.exp: Add notes (in failure messages) about known failures with gcc cygnus-2.4.5-930417. * gdb.t02/Makefile.in, gdb.t08/Makefile.in: Make all depend on comp-info.exp so it gets built if it doesn't exist. * gdb.t13/{Makefile.in,bitfields.exp}: Remove comp-info.exp stuff; it is no longer used. * gdb.t13/comp-info.c: Removed. Wed Oct 13 22:54:06 1993 Jim Kingdon (kingdon@deneb.cygnus.com) * gdb.t06/signals.exp: Add xfail for sun3. Thu Oct 7 12:01:03 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t17/interrupt.exp: Add xfail for Irix (currently not really relevant because ^C doesn't get sent but failure can be reproduced interactively). Tue Oct 5 10:43:11 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.stabs/alpha.mt: New configuration file for alpha. * gdb.stabs/configure.in: Use it. * gdb.stabs/ecoff.mt, weird-ecoff.sed: Change sed script to enable sharing with alpha.mt, redefine long to word via preprocessor. * gdb.stabs/weird.def: Conditionally adapt storage layout of v_comb for alpha. * gdb.stabs/weird.exp: Handle compilation of weird.s by alpha native cc. * gdb.t00/teststrategy.exp: Change expect string so that we consume the `(xgdb)' from the command echo and from the gdb prompt. * gdb.t05/expr.exp: xfail "print unsigned int == (~0)" on the alpha. gdb currently compares all values as long, so this failure probably applies to any configuration where LONGEST is bigger than a target int. * gdb.t08/comp-info.c: New file to determine if gdbme is compiled with gcc. * gdb.t08/Makefile.in, opaque.exp: Use it. Alpha native cc is unable to handle opaque pointers, gcc is. * gdb.t21/gdbme.cc, gdb.t23/gdbme.cc: operator new takes a size_t as first argument. Include and change all operator new definitions to use size_t. * gdb.t21/cplusfuncs.exp: Handle changes in output for operator new now that we use size_t. Wed Sep 29 00:55:49 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t03/ptype.exp, gdb.t15/printcmds.exp: When constructing a long or float array cast all array members to the same type. * gdb.t04/setvar.exp: Handle the decimal output of an unsigned long with 64 bit longs. * gdb.t07/watchpoint.exp: Add finish and until variations encountered on alpha. * gdb.t08/opaque.exp, gdb.t17/interrupt.exp: Add xfails for alpha. Tue Sep 28 17:26:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t24 (demangle.exp): Constructors of templates have names like vector::vector(int) not vector::vector(int). See section 14.6 of the ARM. * gdb.t24 (demangle.exp): Remove a whole bunch of tests of the form "_vt$MoveCmd"; these differ only in name from "_vt$foo", so they accomplish little and slow down the testsuite. * gdb.t24 (demangle.exp): Accept "XXX const" as well as "const XXX". Accept spaces various places. Tue Sep 21 17:28:45 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t07/watchpoint.exp: On sparc, clear xfail for calling function with watchpoint enabled. * Makefile.in: Remove definition of CC and remove the second definition of CXX (the "CXX = gcc" one remains). These definitions were causing backquotes to be expanded within backquotes, which doesn't work. Sat Sep 18 09:43:21 1993 Jim Kingdon (kingdon@poseidon.cygnus.com) * gdb.t17/callfuncs.exp: Add "return 0" to end. Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.stabs/ecoff.mt: Remove STABSCC hack. * gdb.stabs/weird.exp: Handle the case where weird.o is compiled by mips cc and contains no stabs entries. Thu Sep 16 17:22:12 1993 Rob Savoye (rob@darkstar.cygnus.com) * config/vx-gdb.exp: Use fake device to load files rather than NFS. * lib/gdb.exp: New proc to do "file" command. * config/unix-gdb.exp: Use new "file" proc. Thu Sep 16 13:45:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * config/mips-gdb.exp (gdb_load): Increase timeout to 2400. Rework board rebooting slightly. (gdb_exit): Don't exit from the remote shell; there isn't one. * gdb.stabs/weird.exp: If a program is being debugged already, kill it. * gdb.t04/setvar.exp: Stop and restart gdb. * gdb.t05/expr.exp: Likewise. * gdb.t07/watchpoint.exp: If target is mips-idt-*, stop and restart gdb and reload the program. * gdb.t08/opaque.exp: Likewise. * gdb.t12/scope.exp: Likewise. * gdb.t13/bitfields.exp: Likewise. * gdb.t15/funcargs.exp: Likewise. * gdb.t20/classes.exp: Likewise. * gdb.t03/ptype.exp: Increase timeout. * gdb.t16/printcmds.exp (test_print_string_constants, test_print_array_constants): Likewise. * gdb.t17/callfuncs.exp (do_function_calls): Likewise. * gdb.t20/classes.exp (do_tests): Likewise. * gdb.t22/virtfunc.exp (test_virtual_calls): Likewise. Wed Sep 15 14:24:36 1993 Ian Lance Taylor (ian@cygnus.com) * gdb.stabs: Renamed *wierd* to *weird*. Wed Sep 15 10:36:50 1993 Jim Kingdon (kingdon@cirdan.cygnus.com) * gdb.t13/bitfields.exp: Test for bad output rather than waiting for timeout. Add "known gcc 2.4.5 bug" to failure message. Tue Sep 14 17:16:44 1993 Jim Kingdon (kingdon@cirdan.cygnus.com) * gdb.stabs/wierd.exp (print_wierd_var): Test size, not type name. (do_tests): Remove xfail for whatis on one_var and two_var. Wed Sep 8 23:14:23 1993 Rob Savoye (rob@darkstar.cygnus.com) * Makefile.in: Made cross building work better by adding {RUNTEST,CC}_FOR_TARGET and using TARGET_FLAGS_TO_PASS. Tue Sep 7 14:11:52 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t15/{return.c,return.exp,Makefile.in}: New test, currently commented out. Tue Aug 31 16:51:29 1993 Rob Savoye (rob@darkstar.cygnus.com) * config/udi-gdb.exp: gdb_exit now kills any isstip processes still running and removes the leftover named socket so GDb can do clean restarts. Mon Aug 30 17:55:16 1993 Rob Savoye (rob@darkstar.cygnus.com) * gdb.t01/run.exp: Add match for VxWorks, cause I/O comes out the console, not GDB. * config/mt-*: Added default values for RUNTEST and RUNTESTFLAGS so cross testing works better with "make check" * config/unix-gdb: Use default procedures for exit and version. * config/vx-gdb.exp: Cleaned up and massaged back to working order with the newest VxWorks. Thu Aug 26 17:50:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t20/classes.exp: For "ptype class Base1", continue to accept old form. * gdb.t22/virtfunc.exp: If it prints `struct' (not `class') with a name (e.g. devo gdb with gcc 2.4.5), it is still a pass. * gdb.t10/crossload.exp: Skip whole file (for now, until we fix it). * config/unix-gdb.exp: Remove this version of gdb_exit * lib/gdb.exp: Merge in all the crap from config/unix-gdb.exp. Rob says he'll look at it when he gets back to testing boards. Thu Aug 26 07:20:00 1993 Fred Fish (fnf@deneb.cygnus.com) * gdb.t22/virtfunc.exp: Accept missing struct/class names as an expected fail for certain ptype commands. * gdb.t20/classes.exp: Update expected results of "ptype class Base1" to account for the constructor that now appears in the type. Wed Aug 25 16:48:05 1993 Fred Fish (fnf@deneb.cygnus.com) * configure.in (configdirs): Restore gdb.t04, which mysteriously disappeared from list. * config/{udi-gdb.exp, gdb-unix.exp}: Replace calls to obsolete "alldone" proc with call to cleanup and exit. * {gdb.t01/run.exp, gdb.t01/term.exp, gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t06/break.exp, gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, gdb.t09/corefile.exp, gdb.t10/crossload.exp, gdb.t11/list.exp, gdb.t12/scope.exp, gdb.t13/bitfields.exp}: Replace calls to "alldone" proc with simple returns that suppress remaining tests. The alldone proc went away many months ago. Tue Aug 24 11:04:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t10/nodebug.exp: Comment out "maint print msymbols" tests. * gdb.t12/gdbme0.c (localscopes, autovars): Modify to foil gcc -O. Thu Aug 19 22:08:41 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t15/funcargs.exp: Allow arguments for main in backtraces as vax gdb will display them. Thu Aug 19 18:18:59 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t20/gdbme.cc: Do some calculation with v.x, to confound optimizers. * scope.exp: Change "bad value for localval" messages so each one is unique. * config/unix-gdb.exp (gdb_exit): Move info on this vs. lib/gdb.exp (gdb_exit) from ChangeLog to comments. * gdb.t06/signals.exp: Skip the whole file with xfail for delta68. Tue Aug 17 00:05:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/teststrategy.exp: Deal with it if cmdsize = 1 line doesn't exist (due to optimization). Mon Aug 16 21:05:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.stabs/wierd.exp: Deal with it if echo of "file" command contains \r because the filename is long. * gdb.t06/signals.exp: Revise comments regarding "'next' behaved as 'continue'" bug, and change xfail back to i*86-univel-sysv4*. Mon Aug 16 03:05:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t00/help.exp, gdb.t02/whatis.exp, gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, gdb.t17/interrupt.exp: Update for vax running Ultrix. * gdb.t02/whatis.exp: Use procedure to setup xfails on long versus int tests. * gdb.t08/opaque.exp: Use procedure to setup xfails for opaque tests. Thu Aug 12 15:24:28 1993 Fred Fish (fnf@deneb.cygnus.com) * Makefile.in (distclean): Remove *.log *.plog *.sum *.psum site.*. * gdb.t17/interrupt.exp: Fix 'missing Continuing' case so pattern to match does not match the passing case but still matches the failing case. Thu Aug 12 16:58:59 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in (distclean): Remove *.plog *.sum *.psum site.*. Wed Aug 11 19:47:27 1993 John Gilmore (gnu@rtl.cygnus.com) * lib/gdb.exp (gdb_exit): Move the best version of gdb_exit to here. Fix 'Quit anyway.*?' bug (? is a regexp metacharacter). * config/{mips-gdb.exp, nind-gdb.exp, udi-gdb.exp, vx-gdb.exp}: Remove various versions of gdb_exit. * config/vx-gdb.exp: Remove quit_vxgdb, change a caller to call gdb_exit. * config/unix-gdb.exp: gdb_exit remains here, and should override the generic version, since it's doing a lot of wierd stuff that the other versions aren't. FIXME, fold it in, or abandon this version. Wed Aug 11 12:09:32 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t24/demangle.exp: Add tests for PR 3220. Tue Aug 10 15:49:35 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t24/demangle.exp: Add lucid test for __vtbl__3foo__vt_cc_main_. Tue Aug 10 15:45:25 1993 Fred Fish (fnf@deneb.cygnus.com) * gdb.t07/watchpoint.exp: Clear xfail with "i*86-*-*", not just "i386-*-*". Works for i486 as well. * gdb.t06/signals.exp: Rework code that recognizes known SVR4 bug, and expand domain of xfail to all SVR4 systems, since the actual problem is likely to be in generic SVR4 /proc support. Tue Aug 10 15:49:35 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * config/unix-gdb.exp (gdb_load): Add eof to expect statement. Tue Aug 10 09:56:56 1993 Fred Fish (fnf@deneb.cygnus.com) * gdb.t17/interrupt.exp: Set up xfail for *-*-sysv4*, in chain of xfails for other systems. Match a missing 'Continuing.' as an explicit fail for i*86-*-sysv4*, so it doesn't hose other tests. * gdb.t20 {classes.exp, inherit.exp, misc.exp}, gdb.t21/cplusfuncs.exp, gdb.t22/virtfunc.exp, gdb.t23/templates.exp, gdb.t31/chillvars.exp: Only issue warning for missing executables if -all option is used. * gdb.stabs/wierd.exp: Only issue warning for missing wierd.o file if -all option is used. It's like an unpredictable XFAIL. Mon Aug 9 10:13:34 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t15/funcargs.exp: Add comments that hppa xfails are only for dynamically linked binaries. * gdb.t10/crossload.exp: Add `set gnutarget auto' at end of tests. Sun Aug 8 14:21:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t20/inherit.exp: Change message for "print tagless struct" to state that this is a known bug in old versions of g++. Fri Aug 6 21:40:30 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t17/interrupt.exp: Add xfail for 386 bsd. Accept echoed newline while waiting for `Continuing'. Fri Aug 6 13:38:08 1993 Fred Fish (fnf@deneb.cygnus.com) * gdb.t10/nodebug.exp: Expect to find local/global minimal symbols in text, data, and bss. * gdb.t10/nodebug.c: Add local and global test variables for initialized and uninitialized data. Thu Aug 5 12:18:40 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * config/unix-gdb.exp (gdb_exit): Add "wait". Thu Aug 5 18:14:06 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t06/signals.exp: xfail the continue from the handler for all targets. * gdb.t07/watchpoint.exp: clear_xfail for i386 when calling a function with watchpoints enabled, the i386 call dummy starts with a call. * gdb.t00/teststrategy.exp, gdb.t09/Makefile.in: Handle the way 386 bsd names its corefiles. Wed Aug 4 08:53:41 1993 Fred Fish (fnf@cygnus.com) * gdb.t10/Makefile.in (nodebug.o): Don't use "-c -o", many compilers don't grok it. * gdb.t16/gdbme.c (ctable1): Initialize unsigned char array with small octal ints rather than character constants, which are signed and might not fit if first promoted to int. Tue Aug 3 18:28:25 1993 Fred Fish (fnf@cygnus.com) * gdb.t09/Makefile.in (clean): Remove corefile. Mon Aug 2 12:47:44 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t07/watchpoint.exp: Add missing `$prompt $'. Mon Aug 2 12:30:14 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) and Jim Kingdon (kingdon@cygnus.com) * gdb.t06/signals.exp: Change xfail from "*-*-*" to be only for NO_SINGLE_STEP machines. Fix comment about its cause. Uncomment the `continue' test right after it (also xfailed if NO_SINGLE_STEP). Fri Jul 30 19:46:55 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t17/interrupt.exp: Add xfail for hppa. Fri Jul 30 12:54:11 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t08/opaque.exp, gdb.t09/corefile.exp: Cleanup xfails for fixed mips bugs. * gdb.t13/bitfields.exp, gdbme.c: Examine a variable in the inferior to determine signed-ness of bitfields and use the result to setup the xfail. * gdb.t15/gdbme.c: Add comments to the two indirect call0a lines. * gdb.t15/funcargs.exp: Use them to step until the second indirect call line is reached if necessary. Thu Jul 29 20:33:08 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.stabs/wierd.exp: New test, for nameless baseclasses. Mon Jul 26 00:15:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/break.exp: Also test `clear' command. Wed Jul 21 18:03:38 1993 Jim Kingdon (kingdon@deneb.cygnus.com) * gdb.t00/teststrategy.exp: Remove extra quote. * gdb.t07/watchpoint.exp: Change xfail for calling function with watchpoint enabled to be for all non-68k machines. * gdb.t15/{mips_pro.{c,exp},Makefile.in}: New test. Mon Jul 19 23:59:26 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.stabs/configure.in: If configured -with-gnu-as for mips-*-* targets use aout.mt instead of ecoff.mt as gas understands standard aout format. Mon Jul 19 18:14:06 1993 Jim Kingdon (kingdon@deneb.cygnus.com) * lib/gdb.exp (runto): Don't insist that function we are running to was compiled with -g. * gdb.t10/{nodebug.{c,exp},Makefile.in}: New test. * gdb.t17/interrupt.exp: Before sending ^C, give the inferior time to get back into the read system call. Accept leading newline in case where we woke it up. Sun Jul 18 08:40:45 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.stabs/{ecoff.mt,wierd-ecoff.S,wierd-ecoff.sed}: New files to make the stabs test work on ecoff systems using gcc and -with-stabs. * gdb.stabs/{Makefile.in,configure.in,aout.mt,xcoff.mt}: Modify to enable ecoff configuration. Thu Jul 15 11:54:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t15/funcargs.exp (localvars_in_indirect_call): New test. Wed Jul 14 09:36:42 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t16/printcmds.exp: Add another printf test. Wed Jul 14 15:37:13 1993 Ian Lance Taylor (ian@cygnus.com) * configure.in: If configured -with-stabs on any target, add stabsdirs to configdirs. Wed Jul 14 09:36:42 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t16/printcmds.exp: Change printf "%f\n" to printf "%f is fun" so pattern does not match the command itself. Mon Jul 12 11:22:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t15/{gdbme.c,funcargs.exp}: Test for alloca-influenced frames. Sun Jul 11 12:03:24 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t17/interrupt.exp: Test for more things. Fri Jul 9 14:11:17 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t07/watchpoint.exp: In until test, deal with the way the DEC compiler arranges the code and line numbers. * gdb.t17/interrupt.exp: Don't send \n after ^C. Fri Jul 9 09:47:02 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t00/help.exp: Increase expect input buffer size. Thu Jul 8 14:26:50 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/signals.exp: Remove sparc xfail; bug fixed. * gdb.t07/watchpoint.exp: Add xfail for hppa. * gdb.t17/{gdbme.c,callfuncs.exp}: Add sum10 function, to test pa bug. * gdb.t06/signals.exp: At "p func1 ()" test, check for breakpoint [0-9]*, not just [0-9]. Wed Jul 7 17:52:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t20/{gdbme.cc,classes.exp}: Add xfail for gdb/2972. * gdb.t2*: Set CXXFLAGS, not CFLAGS, since that's what we use. Tue Jul 6 13:54:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/help.exp: Replace most of docstring for "continue" with .*. Mon Jul 5 22:03:45 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/signals.c: Add xfails for sun3. * gdb.t07/watchpoint.exp: Comment out xfail for fixed bug 1836. * gdb.t07/{gdbme.c,watchpoint.exp}: Add test for 2597. Also add test_stepping tests. Fri Jul 2 09:08:10 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t{06,17}/Makefile.in (clean): Remove all executables. * gdb.t17/{interrupt.{c,exp},Makefile.in}: New test for solaris bug. * gdb.t06/twice.exp, Makefile.in: Just use an include of twice.c rather than actually putting it through cpp twice. * gdb.t06/signals.exp: Add xfails for unixware and rs6000. Fri Jul 2 10:48:03 1993 Ian Lance Taylor (ian@cygnus.com) * config/mips-gdb.exp (gdb_exit): Removed close statement which is no longer needed. Fri Jul 2 09:08:10 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/signals.exp: Add test for sparc bug with do_save_insn. * gdb.t20/{classes,inherit}.exp: If a class which doesn't use any C++ features prints as "struct", make it a pass, not an xfail. Thu Jul 1 22:03:33 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t22/virtfunc.exp: Remove a bunch of xfails. Don't require VA to print as "class" rather than "struct". Thu Jul 1 18:27:40 1993 Jim Kingdon (kingdon@cygnus.com) * gdb.t06/twice.exp: Don't care about the file name GDB prints. Wed Jun 30 18:01:00 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t{02,13}/comp-info.c, gdb.t06/twice.exp: Add "return 0" to end. Tue Jun 29 13:15:42 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t12/scope.exp: Remove xfail for parameter printing in wrong order. Tue Jun 29 09:22:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t16/printcmds.exp: Add printf tests. * gdb.t06/{twice.{c,exp},Makefile.in}: New test. * gdb.t10/Makefile.in (clean): Remove $(EXECUTABLES) too. Mon Jun 28 11:25:59 1993 Fred Fish (fnf@cygnus.com) * gdb.t20/classes.exp: Add clear_xfail's before printing summary pass counts, to counteract any existing or future setup_xfails. Mon Jun 28 09:15:17 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.stabs/wierd{.def,-aout.S,-xcoff.S}: Use new macros {BEGIN,END}_COMMON for common block instead of STAB. * gdb.stabs/wierd.exp: Add xfail for rs6000. * gdb.stabs/wierd.def: Make value of N_GSYM's 0. intp_var should be N_GSYM not N_LSYM. wierd-aout.S: Use a label for the value of the N_SO. wierd.def: Remove all backslashes. wierd-{aout,xcoff}.S: Put a few tests with backslashes here. Mon Jun 28 07:21:51 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t20/gdbme.cc (main): Move variable initialization for AIX to get the expected next to inheritance3. Sun Jun 27 12:29:53 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t00/teststrategy.exp: Remove expected failure for mips-*-* now that gcc-2.4 gets it right. Fri Jun 25 12:00:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.stabs/wierd{.def,.exp,-aout.S,-xcoff.S}: Add common block test. * gdb.t{02,13}/{Makefile.in,gdbme.c,comp-info.c}: New way of generating comp-info.exp which works for cross-compilation. Thu Jun 24 16:55:05 1993 Fred Fish (fnf@cygnus.com) * gdb.t11/list.exp: For SVR4 xfails, match "*-*-sysv4*", not "*-*-sysv4.*". Tue Jun 22 21:17:26 1993 Fred Fish (fnf@cygnus.com) * gdb.t01/run.exp: Start with a fresh gdb. * gdb.t11/list.exp: For SVR4 xfails, match on all versions of SVR4.x. Mon Jun 21 15:23:22 1993 Fred Fish (fnf@cygnus.com) * {gdb.t01, gdb.t02, gdb.t03, gdb.t04, gdb.t05, gdb.t06, gdb.t07, gdb.t08, gdb.t09, gdb.t10, gdb.t11, gdb.t12, gdb.t13, gdb.t15, gdb.t16, gdb.t17, gdb.t20, gdb.t21, gdb.t22, gdb.t23, gdb.t30}/ Makefile.in (distclean, realclean): Remove gdbme.c from list of things to remove. Sat Jun 19 07:49:10 1993 Fred Fish (fnf@cygnus.com) * gdb.t24/demangle.exp (test_gnu_style_demangling): Add some new test cases from bug reports. Fri Jun 18 10:38:49 1993 Fred Fish (fnf@cygnus.com) * gdb.t06/break.exp: Add xfails for sparc-sun-solaris2.*. * gdb.t12/scope.exp: Add clear_xfails at appropriate places to avoid spurious xfails. * gdb.t20/classes.exp: Add xfails for longstanding C++ problems. * gdb.t21/cplusfuncs.exp: Add xfails for sparc-sun-solaris2.*. * gdb.t22/virtfunc.exp: Add xfails for longstanding C++ problems. Wed Jun 16 10:11:57 1993 Fred Fish (fnf@cygnus.com) * gdb.t00/teststrategy.exp: Rework to provide more useful description of each test, fix problem with systems that define ALIGN_STACK_ON_STARTUP code, other misc cleanups. * gdb.t06/break.exp (test_next_with_recursion): Fix expected results for "next over recursive call" so timeouts aren't taken by error. Mon Jun 14 09:09:04 1993 Jim Kingdon (kingdon@cygnus.com) * gdb.t12/scope.exp: Test printing of variables before run. * gdb.t12/{gdbme0.c,scope.exp}: Test for bug where parameters are printed in wrong order due to sorting. Sat Jun 12 15:03:58 1993 Fred Fish (fnf@cygnus.com) * gdb.t00/teststrategy.exp: Fix expected results for printing user entered string constant. Is array of char, prints with no address. * gdb.t00/{default.exp, help.exp}: Account for changes to radix commands. * gdb.t16/gdbme.c: Add and use struct containing arrays of char. * gdb.t16/printcmds.exp: Fix all lines that match "unsigned char *". * gdb.t16/printcmds.exp (test_print_char_arrays): Test printing of struct of char arrays. * gdb.t00/radix.exp: New tests for radix commands. Fri Jun 11 13:12:27 1993 Jim Kingdon (kingdon@cygnus.com) * gdb.t16/printcmd.exp: Print a variable before running program (with xfail for AIX). Thu Jun 10 11:04:04 1993 Jim Kingdon (kingdon@cygnus.com) * gdb.t06/{signals.exp,signals.c,Makefile.in}: New test. * gdb.t16/printcmd.exp: Don't print variables before running program. * gdb.t06/break.exp: Don't require envp argument to main. * gdb.t0{2,3,4,5}/gdbme.c [_AIX]: Use signed keyword. * gdb.t02/whatis.exp, gdb.t11/list.exp: Add xfails for rs6000. * gdb.t02/whatis.exp: Change other tests not to re-test something we already tested. * gdb.t{03,15,16}/gdbme.c: Reference all variables and make sure each type used has a variable of that type. Tue Jun 8 16:45:20 1993 Jim Kingdon (kingdon@rtl.cygnus.com) * gdb.t20/{inherit.exp,gdbme.cc}: Test tagless structure. Fri Jun 4 11:07:19 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) * configure.in: change srctrigger to be a file, not a directory Fri Jun 4 08:23:57 1993 Ian Lance Taylor (ian@cygnus.com) * configure.in (mips-idt-ecoff*): Added trailing '*'. * gdb.t11/list.exp: Fixed a couple of typos. Tue Jun 1 21:28:06 1993 Fred Fish (fnf@cygnus.com) * gdb.t00 (teststrategy.exp): Remove notice about PR 1823. Bug is fixed and PR is closed. * gdb.t16 (gdbme.c): Add simple test string variable. * gdb.t16 (printcmds.exp): Add tests with simple test string variable, primarily for boundaries on "set print elements". Mon May 31 11:36:08 1993 Jim Kingdon (kingdon@cygnus.com) * gdb.stabs/wierd.exp: Remove xfail for printing big integer. Make leading 0's optional and don't expect a tab in the middle of the number. * gdb.t00/teststrategy.exp: Remove xgdb before trying the copy. * gdb.stabs/wierd.def: Type attributes must be preceded by number=. * gdb.stabs/wierd.exp: Remove xfails for type attributes. Also don't end command passed to gdb_test with newline. * gdb.t13/{Makefile.in,gdbme.c,bitfields.exp}: If we #defined the signed keyword away, don't expect signed bitfields to be signed. * gdb.t13/bitfields.exp (bitfield containment): Accept the fields printing with only as many 1's as are in the field as well as printing with 32 1's (see comment). Sat May 29 17:57:01 1993 Fred Fish (fnf@cygnus.com) * gdb.t00/default.exp: Start with a fresh gdb. * configure.in (configdirs): Remove gdb.t31 until the chill compiler works again. It no longer is able to find chillrt0 since it isn't in libchill.a anymore. * gdb.stabs/wierd.exp: Rewrite to properly handling a missing wierd.o, make more modular. * gdb.stabs/wierd.def (bad_neg0type, bad_neg0const): Remove spurious newlines that caused problems. Wed May 26 09:57:19 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * Move test with enums and partial symbols from gdb.t03/ptype.exp to gdb.stabs/wierd.exp since GCC has worked around the bug. gdb.stabs/wierd.{exp,def}: Many new tests. * gdb.t00/default.exp: update info line for new message. * gdb.t02/{whatis.exp,gdbme.c}: Test that "char *" doesn't print as "caddr_t". Tue May 25 13:28:27 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/help.exp: Use .* in place of some help messages which just changed. gdb.t00/default.exp: Update "info frame" test for new message. * gdb.stabs/wierd.exp: Check for eof, directly or via gdb_test. Remove some xfails Mon May 24 00:24:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t03/{gdbme.c,ptype.exp}: Add tests for typedef'd struct and union without tags. Also check "whatis" on a variable of a typedef'd enum without a tag. * gdb.t00/teststrategy.exp: For p "foo", remove sun4 XFAIL (see PRMS 1823; the bug still exists but isn't reproduced by this test anymore), and remove rs6000 XFAIL (the bug is fixed). * gdb.t03/ptype.exp: Comment out a lot of tests which are basically duplicated from whatis.exp. For those that are left, accept "long", "long int", or "int" for long variables (whatis.exp already has an XFAIL for "int", so no need to fail it here). * gdb.t02/whatis.exp, gdb.t10/crossload.exp: Deal with GCC's names for types now that GDB uses the compiler's names. * gdb.t02/{Makefile.in,gdbme.c,whatis.exp}: If not GCC, do some setup_xfail's for sunos4. If we #defined the signed keyword away, don't expect GDB to know that char it is signed. * gdb.t00/teststrategy.exp: Update for symbolic signal names. Sun May 23 08:44:55 1993 Fred Fish (fnf@cygnus.com) * configure.in (configdirs): Add gdb.t24 for C++ tests that should work on any system, regardless of debugging format. * gdb.t21/demangle.exp: Move to gdb.t24. * gdb.t24/demangle.exp: Move from gdb.t21. * gdb.t24/{Makefile.in, configure.in}: New files. Thu May 20 19:39:03 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * configure.in: Do gdb.stabs and C++ tests only for stabs. * gdb.stabs: New directory. Tue May 18 21:12:09 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * config/{mips,nind,udi,unix,vx}-gdb.exp: Look for "Quit anyway.*?" not just "Quit anyway?". Tue May 18 17:13:20 1993 Fred Fish (fnf@cygnus.com) * gdb.t21/demangle.exp: Add a couple of new patterns. Ensure that all setup_xfails are immediately followed by clear_xfails. Tue May 11 09:10:47 1993 Fred Fish (fnf@cygnus.com) * config/unix-gdb.exp, gdb.t00/echo.exp, gdb.t00/help.exp, gdb.t00/teststrategy.exp, gdb.t00/gdbvars.exp, gdb.t01/run.exp, gdb.t01/term.exp, gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t06/break.exp, gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, gdb.t09/corefile.exp, gdb.t10/crossload.exp, gdb.t11/list.exp, gdb.t12/scope.exp, gdb.t13/bitfields.exp, gdb.t15/funcargs.exp, gdb.t16/printcmds.exp, gdb.t17/callfuncs.exp, gdb.t20/misc.exp, gdb.t20/inherit.exp, gdb.t20/classes.exp, gdb.t21/demangle.exp, gdb.t21/cplusfuncs.exp, gdb.t22/virtfunc.exp, gdb.t23/templates.exp, gdb.t30/chexp.exp, gdb.t31/chillvars.exp, lib/gdb.exp: Change place to report bugs from bug-dejagnu@prep.ai.mit.edu to bug-gdb@prep.ai.mit.edu. Fri May 7 09:15:35 1993 Fred Fish (fnf@cygnus.com) * gdb.t17/callfuncs.exp (do_function_calls): Call t_double_values with 0.0, not integer 0. Fri Apr 30 13:17:24 1993 Jim Kingdon (kingdon@cygnus.com) * gdb.t06/break.exp: Update for "Kill the program" message change. Fri Apr 30 09:42:57 1993 Fred Fish (fnf@cygnus.com) * Makefile.in (GDBFLAGS): Set to -nx. * Makefile.in (site.exp): Use GDBFLAGS. Wed Apr 28 13:19:07 1993 K. Richard Pixley (rich@rtl.cygnus.com) * */Makefile.in (CFLAGS): add CFLAGS = -g to all subdirectory Makefiles. (check): depend on just-check. (just-check): added so that tests can be run without a noop build pass. Fri Apr 23 18:13:28 1993 K. Richard Pixley (rich@rtl.cygnus.com) Switch to using configure's configdirs. * Makefile.in (Makefile): add configure.in dependency. (SUBDIRS): removed redundant assignment. * configure.in: switch subdirs assignment to configdirs. * gdb.t*/configure.in: new files. Thu Apr 22 08:27:53 1993 Ian Lance Taylor (ian@cygnus.com) * gdb.t07/watchpoint.exp: Removed a29k expected failure which now works. Tue Apr 20 13:38:40 1993 Fred Fish (fnf@cygnus.com) * gdb.{t20,t21,t22,t23}/Makefile.in: Use $(srcdir) to avoid $< in explicit rules. Apparently this is not supported by some makes. Mon Apr 19 01:54:53 1993 John Gilmore (gnu@cygnus.com) * gdb.t31/Makefile.in: Use $(srcdir) when avoiding $<, sigh. Fri Apr 16 09:33:46 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/unix-gdb.exp: Add back missing return 0 which mysteriously disappeared. Thu Apr 15 02:28:24 1993 John Gilmore (gnu@cacophony.cygnus.com) * gdb.t31/Makefile.in: Avoid $< in explicit rule. Wed Apr 14 16:38:47 1993 Fred Fish (fnf@cygnus.com) * gdb.t07/watchpoint.exp: Remove setup_xfail for i486 watchpoint problem that is now fixed. * gdb.t30/chexp.exp: Remove setup_xfail for printing uninitialized convenience variables. * gdb.t31/chillvars.exp: Fix expected patterns for printing structures. Wed Apr 14 12:55:58 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t00/help.exp: Compensate for bug in mips-*-ultrix* OS which causes expect to get out of sync with gdb on long output from help set. * gdb.t09/corefile.exp: Make expected pattern for core file failing signal and frame output format less sun specific. Tue Apr 13 23:18:07 1993 Per Bothner (bothner@cygnus.com) * gdb.t31/chillvars.exp: Add and remove initial dummy breakpoint, so that symbol table is forced in. (Needed at least on Sunos4, though it seems not SVR4.) * gdb.t31/chillvars.exp: Update for changed output format. Sun Apr 11 17:21:45 1993 Rob Savoye (rob at darkstar.cygnus.com) * config/unix-gdb.exp: Gracefully exits if $GDB is a bogus path. Wed Apr 7 21:28:21 1993 Rob Savoye (rob@cygnus.com) * Makefile.in: Added --srcdir when invoking runtest, removed the need for a local config file. (optional now) Wed Apr 7 14:13:41 1993 Fred Fish (fnf@cygnus.com) * gdb.t21/demangle.exp: Only count real fails (not xfails) for failure count used to force early termination. Add some more expected failures for gnu style demangling. Thu Apr 1 09:50:30 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * Makefile.in (CXXFLAGS): Remove -O. It caused the debug info for the pmi variable from gdb.t20/gdbme to get optimized away. * gdb.t00/teststrategy.exp: Added expected failure for mips-*-*. Check for written corefile upon timeout _and_ eof. Tue Mar 30 09:58:16 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/unix-gdb.exp: Add missing return 0. Tue Mar 30 08:34:25 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t16/printcmds.exp: Remove misplaced xfail that caused an early test termination. Mon Mar 29 17:37:25 1993 Fred Fish (fnf@cygnus.com) * configure.in (subdirs): Put back gdb.t17 which mysteriously disappeared. Thu Mar 25 21:05:16 1993 Fred Fish (fnf@cygnus.com) * gdb.t10/crossload.exp: Disable the i860-elf test until such time as i860 support works. * gdb.t15/funcargs.exp: Fix expected outputs to include "backtrace 100\r" rather than just "backtrace\r", to match last change. Thu Mar 25 12:14:28 1993 Ian Lance Taylor (ian@cygnus.com) * config/udi-gdb.exp (gdb_exit): Remove close command. (gdb_target_udi): New procedure to set the UDI target. (gdb_start): Don't remove *_soc files. Use gdb_target_udi. * gdb.t00/default.exp: Added expected failures for a29k-*-udi. Added waits for prompts after several question responses. Added some more responses used by a29k-amd-udi-gdb. * gdb.t01/run.exp, gdb.t06/break.exp: Added a29k-*-udi support: pass different arguments, restart UDI connection after program completion. * gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, gdb.t11/list.exp, gdb.t12/scope.exp, gdb.t15/funcargs.exp, gdb.t16/printcmds.exp, gdb.t20/misc.exp, gdb.t21/cplusfuncs.exp: Added expected failures for a29k-*-*. * gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, gdb.t12/scope.exp, gdb.t13/bitfields.exp, gdb.t15/funcargs.exp, gdb.t16/printcmds.exp, gdb.t17/callfuncs.exp, gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t20/misc.exp, gdb.t22/virtfuncs.exp: Restart UDI connection after program completion. * gdb.t10/crossload.exp: Does not work for a29k-*-*, since BFD is compiled with a SELECT_VECS setting. * gdb.t15/funcargs.exp: Use argument to backtrace to prevent infinite recursion. * gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t22/virtfuncs.exp: Added checks for COFF results, and made them expected failures for all targets. It would be better to make them expected failures for COFF targets only. Wed Mar 24 14:43:38 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com) * Makefile.in: add null dvi target, don't bother to recurse through test directories for info and install-info; rename $(datadir) to be dejagnu instead of deja-gnu Wed Mar 24 09:48:03 1993 Fred Fish (fnf@cygnus.com) * gdb.t31/gdbme.ch: Re-enable code that previously caused compiler to coredump. * gdb.t31/chillvars.exp: Re-enable tests that depend on that code. Tue Mar 23 08:53:42 1993 Fred Fish (fnf@cygnus.com) * gdb.t31/gdbme.ch: Comment out code that causes chill compiler coredump. * gdb.t31/chillvars.exp: Comment out tests that depend on that code. Sun Mar 21 17:56:47 1993 Rob Savoye (rob at darkstar.cygnus.com) * gdb.t03/ptype.exp: tests for return code from gdb_test. * gdb.t00/teststrategy.exp: Uses which proc rather than spawning which in a shell. Deletes xgdb when done. * config/unix-gdb.exp: Won't try to spawn $GDB unless it exists. Tests the return from the "set height" or "set width" commands. Added a few return codes where needed. Wed Mar 17 11:31:01 1993 Fred Fish (fnf@cygnus.com) * Makefile.in (SUBDIRS): Add gdb.t17. * configure.in (subdirs): Add gdb.t17. * gdb.t17/{Makefile.in, callfuncs.exp, gdbme.c}: New test files to test gdb's calling of functions in the inferior with the correct arguments and gdb's ability to retrieve any result returned. Tue Mar 16 15:37:11 1993 Fred Fish (fnf@cygnus.com) * config/unix-gdb.exp (gdb_exit): Remove close commands that may be called after gdb goes away. Previous versions of expect needed these to avoid file descriptor leaks, but they cause errors with the current revision of expect. * gdb.t00/gdbvars.exp: Use -re on expected output after setting sevenbit-strings. * gdb.t04/setvar.exp, gdb.t13/bitfields.exp: Make commands to set sevenbit-strings consistent across tests. gdb.t30/chexp.exp, gdb.t31/chillvars.exp: Make commands to set sevenbit-strings consistent across tests. Fri Mar 12 08:47:20 1993 Fred Fish (fnf@cygnus.com) * gdb.t21/demangle.exp (proc demangle): Adjust quotes in an expected output to match current "expect" expectations. Wed Mar 10 18:01:49 1993 Fred Fish (fnf@cygnus.com) * gdb.t00/default.exp: Change expected output for default "source" command, to match new gdb behavior which requires a filename to source. Tue Mar 9 11:00:56 1993 Fred Fish (fnf@cygnus.com) * gdb.t07/watchpoint.exp (test_simple_watchpoint): Set up expected fail for i486-*-* that misses the marker2 function. * gdb.t10/crossload.exp (bfddefault): Allow successful recognition of a format to pass even if no symbols are found. Explicitly catch failures where the format is not recognized or is ambiguous, and add the reason to the fail message. * gdb.t10/crossload.exp (bfdexplicit): Catch failure where the cause is and invalid target and add reason to failure message. * gdb.t10/crossload.exp: Fix bfd target names for elf32-m68k, elf32-i386, elf32-sparc, and elf32-i860. * gdb.t12/scope.exp (test_at_main, test_at_foo, test_at_bar): Set up expected failure for 'filename'::variable scope resolution, which is now apparently broken on all targets. * gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t20/misc.exp, gdb.t21/cplusfuncs.exp, gdb.t22/virtfunc.exp, gdb.t23/templates.exp: Change failure for missing binfile into just a warning. gdb.t21/demangle.exp: Change all cfront references to 'arm' references. Mon Mar 8 19:20:28 1993 Fred Fish (fnf@cygnus.com) * gdb.t00/default.exp: Add expected output for default "source" command, to match new gdb behavior. * gdb.t09/corefile.exp: Use GDBFLAGS when spawning GDB. Sun Mar 7 15:14:09 1993 Rob Savoye (rob@cygnus.com) * config/*-gdb.exp: returns an error, rather than exiting on internal errors. Tue Mar 2 18:09:32 1993 Fred Fish (fnf@cygnus.com) * gdb.t03/gdbme.c: Add pointer to struct variable. * gdb.t03/ptype.exp: Test equivalence of '.' and '->' for referencing struct members. Thu Feb 25 10:39:06 1993 Ian Lance Taylor (ian@cygnus.com) * configure.in (mips-idt-ecoff): New target. * config/mips-gdb.exp: New file for remote board using MIPS remote debugging protocol. * Redid configuration scheme. Removed gdb.t*/configure.in. Renamed gdb.t*/in-gdbme* to gdb.t*/gdbme*. Changed to use CC, CXX instead of CC_FOR_TARGET, CXX_FOR_TARGET. Added mostlyclean and distclean targets. Built executables via .o files. Adjusted tests to account for source files in $(srcdir) rather than $(objdir). * lib/gdb.exp (runto): Don't expect () after the function name, because it may have arguments. Wed Feb 24 08:05:38 1993 Ian Lance Taylor (ian@cygnus.com) * gdb.t00/default.exp, gdb.t01/run.exp, gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t06/break.exp, gdb.t12/scope.exp: Added expected failures for mips-idt-* and mips-sgi-*. * gdb.t00/default.exp (attach): Kill process if requested. * gdb.t00/help.exp (help target core, help target): Accept a gdb that does not read core files. * gdb.t01/run.exp: Removed checks for exit status code. * gdb.t03/in-gdbme.c: Make explicit call to malloc to ensure that it is linked in. * gdb.t03/ptype.exp: Increase timeout when calling malloc. * gdb.t04/setvar.exp, gdb.t05/expr.exp: Use runto function where appropriate, rather than doing it by hand. * gdb.t07/watchpoint.exp: If mips-idt-*, reload file after first execution. * gdb.t10/crossload.exp: Kill existing program if needed. * gdb.t15/funcargs.exp: Use delete_breakpoints function where appropriate, rather than doing it by hand. Always increase timeout for this test, not just for VxWorks. Wed Feb 24 08:03:38 1993 Fred Fish (fnf@cygnus.com) * gdb.t31/chillvars.exp (test_structs): New proc to test printing of Chill STRUCT types and STRUCT values. * gdb.t31/chillvars.exp (test_strings): Expect "CHAR" now, rather than "char". * gdb.t31/in-gdbme.ch (simple_struct, nested_struct, struct1, struct2): New struct definitions and initializations to test simple Chill STRUCT types. Tue Feb 23 11:55:06 1993 Fred Fish (fnf@cygnus.com) * gdb.t00/teststrategy.exp: Track reversion in gdb to not print the null byte at the end of strings. * gdb.t00/default.exp: Make show version insensitive to copyright date. * gdb.t16/in-gdbme.c (ctable1, ctable2): Make explicitly unsigned to avoid dependencies on target char signedness. * gdb.t16/printcmds.exp: Update expected results for explicitly unsigned char. * gdb.t16/printcmds.exp: Remove setup_xfails for i960 that should now work. * gdb.t21/demangle.exp: Add many more patterns for template demangling, most of them being expected failures. * gdb.t21/demangle.exp (proc demangle): Quote the demangled string we are matching for, to match on the whole string. * gdb.t21/demangle.exp: Add many new test strings to demangle, and fix a whole bunch that had incorrect expected output but were passing anyway because of the bug in "proc demangle". * gdb.t31/chillvars.exp: Remove setup_xfail for printing string type. * gdb.t31/in-gdbme.ch: Uncomment string4, now compiles. Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com) * gdb/testsuite: made modifications to testcases, etc., to allow them to work properly given the reorganization of deja-gnu and the relocation of the testcases from deja-gnu to a "tool" subdirectory. Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com) * gdb/testsuite: Initial creation of gdb/testsuite. Migrated dejagnu testcases and support files for testing nm to gdb/testsuite from deja-gnu. These files were moved "as is" with no modifications. This migration is part of a major overhaul of dejagnu. The modifications to these testcases, etc., which will allow them to work with the new version of dejagnu will be made in a future update. Local Variables: mode: indented-text left-margin: 8 fill-column: 74 version-control: never End: