2002-05-14 Elena Zannoni * gdb.arch: New directory. * gdb.arch/configure.in: New file. * gdb.arch/configure: New file. * gdb.arch/Makefile.in: New file. 2002-05-13 Corinna Vinschen * gdb.asm/asm-source.exp: Add v850 as supported target. * gdb.asm/v850.inc: New file. 2002-05-13 Daniel Jacobowitz * gdb.c++/annota2.exp (annotate-quit): Add comment. 2002-05-12 Daniel Jacobowitz * gdb.base/break.exp: Check 'break "marker2"'. 2002-05-10 Michael Snyder * gdb.base/long_long.exp: Fix typo. 2002-05-10 Jim Blandy * gdb.base/printcmds.exp: Don't xfail the ptype command. This is a bug. * gdb.base/printcmds.exp (test_integer_literals_rejected): Recognize more detailed error message produced by the macro expander's lexical analyzer. * lib/gdb.exp (test_print_reject): Same. 2002-05-09 Mark Kettenis * gdb.c++/method.exp: Fix typo. 2002-05-08 Michael Snyder * gdb.mi/mi-var-child.exp: Accept (void) as well as (). * gdb.mi/mi0-var-child.exp: Accept (void) as well as (). * gdb.base/default.exp: Merge clauses for arm, strongarm, xscale. * gdb.base/long_long.exp: Merge clauses for arm and xscale. Add iftarget clause for strongarm. 2002-05-06 Michael Snyder * lib/gdb.exp (gdb_test): Add case to allow for status wrapper. (gdb_continue_to_end): Accept output from status wrapper. * gdb.base/ending-run.exp: Add case for output from status wrapper. Clean up fail messages to match pass messages. Enable the "needs_status_wrapper" testsuite feature. * lib/gdb.exp (gdb_wrapper_init): New procedure. (gdb_compile): Conditionally call gdb_wrapper_init. * gdb.base/a2-run.exp: Recognize output from status wrapper. * gdb.c++/method.exp: Recognize output from status wrapper. 2002-05-06 Ben Elliston From Graydon Hoare * config/sid.exp: Include support for "rawsid" protocol. 2002-05-03 Jim Blandy * gdb.c++/hang.exp: Check for corruption of the cv_type chain. * gdb.c++/hang3.C: New file. 2002-05-04 Andrew Cagney * gdb.base/default.exp: Remove obsolete code. * gdb.c++/misc.exp: Ditto. Update copyright. * gdb.c++/cplusfuncs.exp: Ditto. Update copyright. * gdb.base/whatis.exp: Ditto. Update copyright. * gdb.base/scope.exp: Ditto. Update copyright. * gdb.base/ptype.exp: Ditto. Update copyright. * gdb.base/printcmds.exp: Ditto. Update copyright. * gdb.base/opaque.exp: Ditto. Update copyright. * gdb.base/list.exp: Ditto. * gdb.base/funcargs.exp: Ditto. Update copyright. * gdb.hp/gdb.threads-hp/usrthbasic.c: Delete. * gdb.hp/gdb.threads-hp/usrthbasic.exp: Delete. * gdb.hp/gdb.threads-hp/usrthcore.c: Delete. * gdb.hp/gdb.threads-hp/usrthcore.exp: Delete. * gdb.hp/gdb.threads-hp/usrthfork.c: Delete. * gdb.hp/gdb.threads-hp/usrthfork.exp: Delete. 2002-05-02 Michael Snyder * gdb.base/watchpoint.exp: Add xscale target. * gdb.base/long_long.exp: Add xscale target. * gdb.base/default.exp: Add xscale target. 2002-05-01 Jim Blandy * gdb.c++/hang1.C, gdb.c++/hang2.C, gdb.c++/hang.H, gdb.c++/hang.exp: New test. 2002-05-01 Fred Fish * gdb.base/completion.exp: Handle completions of "./Make" for more than one completion possibility, as is the case when we build and test in the source tree. 2002-04-29 Anthony Green * gdb.java/jmisc1.exp: New file. * gdb.java/jmisc2.exp: New file. 2002-04-24 Daniel Jacobowitz * gdb.threads/linux-dp.exp: Use 'unset' instead of 'array unset'. 2002-04-23 Elena Zannoni * gdb.base/help.exp: Change 'help status' to allow for target dependent output differences. 2002-04-22 Michael Chastain * gdb.c++/local.exp: Add PR numbers: gdb/482, gdb/483. 2002-04-22 Michael Chastain * gdb.c++/method.exp: Fix syntax of reference to gdb/277. 2002-04-17 David S. Miller * gdb.asm/sparc64.inc: New file. * gdb.asm/asm-source.exp: Handle sparc64-*-*. 2002-04-19 Elena Zannoni * gdb.asm/asm-source.exp: Don't use a symlink, just copy the instruction file directly into the build tree. Clean up at end of test. 2002-04-18 David S. Miller * gdb.base/annota1.exp: Expect addresses as $hex + whitespace to handle 64-bit platforms correctly. * gdb.base/maint.exp: Likewise. 2002-04-18 Kevin Buettner * gdb.base/shlib-call.exp (additional_flags): AIX doesn't need ``-fpic'' when compiling files comprising a shared library, but it does need additional linker flags in order to find shared libraries at run time. 2002-04-18 Kevin Buettner * gdb.base/cvexpr.c (use): New function. (main): Invoke use() on all global variables to prevent some linkers from deleting these otherwise unused symbols. 2002-04-17 Michael Chastain From David S. Miller * gdb.c++/ovldbreak.exp: Expect addresses as $hex + whitespace to handle 64-bit platforms correctly. 2002-04-12 Michael Snyder From Jim Blandy * gdb.base/foo.c (foox): Remove section attribute; the linker script can handle this instead. * gdb.base/bar.c (barx): Same. * gdb.base/baz.c (bazx): Same. * gdb.base/grbx.c (grbxx): Same. * gdb.base/overlays.exp: New test: check that GDB's manual overlay manager doesn't automatically unmap overlays unnecessarily. 2002-04-10 Martin M. Hunt * gdb.base/ending-run.exp: Fix pattern for Mips targets stepping out of main. 2002-04-09 Michael Chastain * gdb.c++/local.cc (main): Move call to marker1() inside nested scope so that the nested scope tests will make sense. * gdb.c++/local.exp: Write patterns that actually work with gcc (the HP patterns "were never known to work with gcc"). Keep the old aCC patterns too. 2002-04-09 Daniel Jacobowitz * gdb.base/attach.exp: Correct target board test. 2002-04-08 Michael Chastain * gdb.c++/method.exp: Require "const ... A * ..." for "ptype this" in a const method. Add some xfail and fail cases for configurations that do not emit the "const ...". 2002-04-07 Michael Chastain * gdb.c++/method.exp: Use gdb_test instead of send_gdb/gdb_expect. Accept "A * const" and "const A * const" as type of "this". Fix spelling of getFunky throughout. Make messages uniform. 2002-04-07 Elena Zannoni Work around for PR gdb/285: * gdb.asm/asm-source.exp: Bail out if multilibs are detected. 2002-04-07 Elena Zannoni * gdb.asm/asm-source.exp: Build symbolic link to arch specific instructions file at run time instead of configure time. Sometimes we run the test in a directory that is not the one we configured in. * gdb.asm/configure.in: Delete creation of symlink. * gdb.asm/configure: Regenerate. 2002-04-05 J. Brobecker * gdb.gdb/xfullpath.exp: New test, to exercise the new xfullpath () function. 2002-04-04 Daniel Jacobowitz * gdb.asm/Makefile.in: Correct dependencies. * gdb.asm/powerpc.inc: New file. * gdb.asm/asm-source.exp: Add PowerPC. * gdb.asm/configure.in: Likewise. * gdb.asm/configure: Regenerated. 2002-04-04 Daniel Jacobowitz * gdb.base/relocate.exp: New file. * gdb.base/relocate.c: New file. 2002-04-04 Fred Fish * gdb.base/step-test.exp: Update comment regarding stopping in memcpy/bcopy calls inserted as part of the compiler runtime. 2002-04-04 Michael Snyder * gdb.base/ovlymgr.c: Add overlay event breakpoint support. 2002-04-03 Daniel Jacobowitz * lib/gdb.exp (gdb_test): Move -notransfer inside of gdb_expect. (gdb_expect): Remove $notransfer hack. 2002-04-02 Daniel Jacobowitz * gdb.c++/classes.exp ("calling method for small class"): Match updated register output. 2002-03-30 Daniel Jacobowitz Fix PR gdb/452 * gdb.base/dbx.exp: Restore old definition of gdb_file_cmd when finished. Make gdb_file_cmd send "exec-file" when appropriate. 2002-03-30 Daniel Jacobowitz * gdb.base/attach.exp: Remove extra setup_xfail. 2002-03-26 Michael Snyder * gdb.base/default.exp: Add tests for dump, append, and restore. * gdb.base/help.exp: Add tests for dump, append, and restore. * gdb.base/dump.exp: New file, test dump, append and restore. * gdb.base/dump.c: New file. 2002-03-27 Michael Snyder * gdb.base/help.exp: Modify expect strings to reflect clean-ups in help messages. 2002-03-26 Fred Fish * gdb.base/step-test.exp: Accept stopping in memcpy/bcopy when we have debugging info for those functions and the compiler uses them internally to copy structs around. 2002-03-26 Fred Fish * gdb.base/list.exp: Revert the change made yesterday and add note about why we don't list the default lines for remote targets. 2002-03-25 Michael Snyder * gdb.base/help.exp: Clean up unnecessary wild cards in regexps. 2002-03-25 Fred Fish * gdb.base/list.exp: This test works on remote targets so remove the short circuit for remote targets. Update copyright. 2002-03-25 Fred Fish * gdb.base/attach.exp: Fix logic error that was suppressing this test for all non hppa*-*-hpux* targets, instead of the hp target. Move comments closer to the suppression point. Also now need to check that we are running natively. 2002-03-22 Michael Snyder * gdb.base/default.exp: Add test for gcore. Update copyright. * gdb.base/help.exp: Add test for gcore. Update copyright. 2002-03-06 Fred Fish * gdb.base/funcargs.c: Remove extraneous ';' character. * gdb.trace/gdb_c_test.c: Remove extraneous ';' character. 2002-03-04 Michael Chastain * gdb.mi/mi-var-cmd.exp: In test "create local variable func", accommodate gcc v3 function signature. * gdb.mi/mi0-var-cmd-exp: Ditto. 2002-02-24 Andrew Cagney * testsuite/gdb.base/huge.c: Replace ``Linux'' with either ``GNU/Linux'' or ``Linux kernel'' * testsuite/gdb.threads/pthreads.c: Ditto. 2002-02-24 Michael Chastain * gdb.threads/pthreads.c (thread1): Add a return statement. (thread2): Likewise. (foo): Likewise. 2002-02-23 Michael Chastain * gdb.threads/linux-dp.c (philosopher): Add a return statement to placate gcc. 2002-02-23 Michael Chastain * gdb.c++/templates.exp: Remove setup_xfail_format "stabs" on test "ptype bint". The test passes on all my stabs configurations. 2002-02-21 Jim Blandy * gdb.asm/asm-source.exp: Parse the output from `info sources' one filename at a time, and watch for the ones we want to see. * gdb.base/ptype.exp, gdb.base/ptype.c: Add tests for printing types of pointers to prototyped functions. 2002-02-20 Andrew Cagney * gdb.base/sizeof.c (main): Call fill_structs. Print value of signed, unsigned and straight char. (padding_char, padding_short, padding_int, padding_long, padding_long_long, padding_float, padding_double, padding_long_double): New global variables. (fill, fill_structs): New functions. * gdb.base/sizeof.exp: Check for signed and unsigned char. Check for correctly sized writes. Update copyright. (get_valueof): New procedure. (get_sizeof): Call get_valueof. (check_valueof): New procedure. (check_padding): New procedure. 2002-02-20 Michael Chastain * gdb.c++/virtfunc.exp (test_virtual_calls): Remove obsolete calls to setup_xfail. Document some of the remaining calls. 2002-02-18 Michael Chastain * gdb.c++/userdef.exp: Update copyright year. 2002-02-18 Daniel Jacobowitz * gdb.c++/userdef.exp: Test overloaded operators properly. Remove xfails. 2002-02-14 Michael Snyder * gdb.base/gcore.exp: Relax recognition of function breakpoint. 2002-02-14 Daniel Jacobowitz * gdb.base/a2-run.exp: Check for a remote target properly. * gdb.base/annota1.exp: Likewise. * gdb.base/list.exp: Likewise. * gdb.base/reread.exp: Likewise. * gdb.base/scope.exp: Likewise. * gdb.base/shlib-call.exp: Likewise. * gdb.base/term.exp: Likewise. * gdb.c++/annota2.exp: Likewise. 2002-02-13 Richard Earnshaw * gdb.base/watchpoint.exp: Restore previous timeout at end of test. 2002-02-10 Michael Chastain * gdb.base/funcargs.c (localvars_after_alloca): Fix return type. (call_after_alloca): Ditto. 2002-02-10 Daniel Jacobowitz * gdb.base/ending-run.exp: Guard "cont" test with gdb_skip_stdio_test. 2002-02-06 Jim Blandy * gdb.base/callfwmall.c, gdb.base/callfwmall.exp: Move these tests from here... * gdb.hp/gdb.base-hp/callfwmall.c, gdb.hp/gdb.base-hp/callfwmall.exp: To here. Disable this test on non-HP platforms. Add big comment. 2002-02-04 Michael Snyder * gdb.base/ovlymgr.c (ovly_copy): Generalize for targets other than d10v and m32r. 2002-02-02 Richard Earnshaw * gdb.base/default.exp: Rewrite test patterns to reduce time taken to match them. 2002-01-30 Daniel Jacobowitz * gdb.base/annota1.exp (backtrace from shlibrary): Fix spelling. Allow a start function above main. * gdb.threads/linux-dp.exp: Fix copyright date. 2002-01-30 Daniel Jacobowitz * gdb.threads/linux-dp.exp: Use 'array unset', not 'array set'. (check_philosopher_stack): Check for manager thread before checking for a just-starting thread. 2002-01-30 Daniel Jacobowitz From Neil Booth : * gdb.base/bitfields.c: Correct assignments to bitfields to avoid warnings. 2002-01-21 Fred Fish * gdb.base/restore.exp (restore_tests): Fix obvious typo, callee not caller. 2002-01-21 Jim Blandy * gdb.base/reread.exp: Check that GDB properly re-reads the executable file when it changes while no inferior is running. 2002-01-21 Fred Fish * gdb.base/maint.exp: Simplify the "maint info breakpoints" test to optionally accept the "shlib events" variation. 2002-01-21 Jim Blandy * gdb.base/ending-run.c (main): Avoid messing with setvbuf; just call `fflush' after every `printf', so that the output is produced at predictable points, regardless of whatever buffering does (or doesn't) take place. * gdb.base/ending-run.exp: Adjust tests to expect output to appear at different points. 2002-01-20 Daniel Jacobowitz * gdb.c++/inherit.exp: Update copyright years. * gdb.c++/method.exp: Likewise. 2002-01-20 Daniel Jacobowitz * gdb.c++/classes.exp: Update for improved v3 support and skipping artificial methods/arguments. * gdb.c++/derivation.exp: Likewise. * gdb.c++/inherit.exp: Likewise. * gdb.c++/method.exp: Likewise. * gdb.c++/virtfunc.exp: Likewise. 2002-01-18 Andrew Cagney * gdb.hp/gdb.threads-hp/usrthfork.exp: Mark as obsolete. * gdb.hp/gdb.threads-hp/usrthcore.exp: Ditto. * gdb.hp/gdb.threads-hp/usrthbasic.exp: Ditto. * gdb.hp/gdb.threads-hp/usrthfork.c: Ditto. * gdb.hp/gdb.threads-hp/usrthbasic.c: Ditto. * gdb.hp/gdb.threads-hp/usrthcore.c: Ditto. 2002-01-17 Jim Blandy * gdb.asm/asm-source.exp (info symbol): Take another shot at anchoring the pattern matching the entry point symbol's name. 2002-01-17 Andrew Cagney * gdb.base/maint.exp: Update ``maint internal-error'' to match continue/quit query. Update copyright. 2002-01-14 Michael Snyder * gdb.base/gcore.exp: Remove extra debugging output. 2002-01-13 Daniel Jacobowitz * gdb.c++/demangle.exp: Accept slightly dubious v2 demangler result for slightly dubious v2 mangled string. 2002-01-13 Daniel Jacobowitz * gdb.base/completion.exp: Expand ${srcdir} to an absolute path. 2002-01-10 Jason Merrill * gdb.c++/namespace.exp: Accept trailing const for 'this'. * gdb.c++/classes.exp: Accept 'A const' or 'const A' in copy constructors. * gdb.c++/derivation.exp: Likewise. * gdb.c++/templates.exp: Likewise. * gdb.c++/virtfunc.exp: Likewise. 2002-01-10 Michael Snyder * gdb.c++/namespace.exp: Accept both '\0' and '\000'. 2002-01-08 Michael Snyder * gdb.base/gcore.exp: New test for generate-core-file command. * gdb.base/gcore.c: Testcase for above. * gdb.threads/gcore-thread.exp: New test for gcore (threaded). 2002-01-08 Jason Merrill * gdb.c++/userdef.cc: Use instead of . 2002-01-07 Fred Fish * gdb.c++/overload.exp: Remove unconditional xfails for: print foo_instance1.overloadargs(1) print foo_instance1.overloadargs(1, 2) print foo_instance1.overloadargs(1, 2, 3) print foo_instance1.overloadargs(1, 2, 3, 4) print foo_instance1.overloadargs(1, 2, 3, 4, 5) print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6) print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7) print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8) print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8, 9) print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8, 9, 10) print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11) print foo_instance1.overload1arg() print foo_instance1.overload1arg((char)arg2) print foo_instance1.overload1arg((signed char)arg3) print foo_instance1.overload1arg((unsigned char)arg4) print foo_instance1.overload1arg((int)arg7) print foo_instance1.overload1arg((unsigned int)arg8) print foo_instance1.overload1arg((float)arg11) print foo_instance1.overload1arg((double)arg12) 2002-01-07 Michael Snyder * gdb.base/huge.exp: New test. Print a very large target data object. (skip_huge_test): New test variable. Define if you want to skip this test. The test reads an 8 megabyte data object from the target, so it might be very time consuming on remote targets with a slow connection. * gdb.base/huge.c: New file. Test case for above. 2002-01-07 Fred Fish * gdb.c++/derivation.exp: Remove gcc xfails for g_instance.afoo, g_instance.bfoo, and g_instance.cfoo. Mon Jan 7 12:22:18 2002 Jeffrey A Law (law@redhat.com) * gdb.base/break.c (multi_line_if_conditional): New function. (multi_ilne_while_conditional): Likewise. * gdb.base/break.exp: Verify that a breakpoint on a multi-line IF or WHILE condition puts the breakpoint at the start of the condition. * gdb.base/selftest.exp (backtrace through signal handler): Remove hppa*-*-hpux* expected failure. * gdb.base/structs.exp (do_function_calls): Similarly. * gdb.c++/annota2.exp (watch triggered on a.x): Handle hardware watchpoints. 2002-01-06 Andrew Cagney Fix PR gdb/66. * gdb.base/structs.exp: Replace skip for a29k with skip for gdb,cannot_call_functions. * gdb.base/call-ar-st.exp: Remove references to a29k in comments. * gdb.base/callfuncs.exp: Ditto. * gdb.base/call-rt-st.exp: Ditto. * gdb.base/call-strs.exp: Ditto. * gdb.base/callfwmall.exp: Ditto. * gdb.base/scope.exp: Obsolete xfail a29k. * gdb.c++/misc.exp: Ditto. * gdb.c++/cplusfuncs.exp: Ditto. * gdb.base/ptype.exp: Ditto. * gdb.base/printcmds.exp: Ditto. * gdb.base/opaque.exp: Ditto. * gdb.base/list.exp: Ditto. * gdb.base/funcargs.exp: Ditto. * gdb.base/default.exp: Ditto. 2002-01-04 Michael Snyder * gdb.base/info-proc.exp: New file, test for "info proc" cmd. * gdb.base/maint.exp: Add tests for maint info sections options. Fri Dec 21 09:42:11 2001 Jeffrey A Law (law@redhat.com) * gdb.base/default.exp: Remove bogus hppa*-hp-hpux* xfails. 2001-12-20 Corinna Vinschen * gdb.asm/arm.inc: New file. * gdb.asm/asm-source.exp: Add arm targets. * gdb.asm/configure.in: Ditto. * gdb.asm/configure: Recreated from configure.in. Thu Dec 20 09:54:36 2001 Jeffrey A Law (law@redhat.com) * gdb.hp/gdb.defects/bs15503.exp: Only run this test if compiling with HP's compiler. * gdb.hp/gdb.objdbg/objdbg01.exp: Likewise. * gdb.hp/gdb.objdbg/objdbg02.exp: Likewise. * gdb.hp/gdb.objdbg/objdbg03.exp: Likewise. * gdb.hp/gdb.objdbg/objdbg04.exp: Likewise. * gdb.hp/gdb.defects/solib-d.exp: Update to handle building with either HP's compilers or GCC. * gdb.hp/gdb.base-hp/hwwatchbus.exp: Allow inferior to get either a SIGBUS or SIGSEGV. * gdb.hp/gdb.base-hp/so-thresh.exp: Remove useless send_user command. * gdb.hp/gdb.defects/bs14602.exp: Revamp slightly so that test can be compiled with either HP's compiler or GCC. * gdb.hp/gdb.threads-hp/usrthbasic.exp: Disable completely. * gdb.hp/gdb.threads-hp/usrthcore.exp: Disable completely. * gdb.hp/gdb.threads-hp/usrthfork.exp: Disable completely. * gdb.hp/gdb.base-hp/so-thresh.exp: Update text in expect strings to match current gdb output. Update due to using auto-solib-limit for limiting instead of overloading auto-solib-add. * gdb.hp/gdb.base-hp/so-thresh.mk: Always use "cc" to build the test program. * gdb.c++/templates.exp: Use "hppa64-*-*", not "hppa2.0w-*-*" * gdb.hp/gdb.base-hp/dollar.exp: Likewise * gdb.hp/gdb.base-hp/pxdb.exp: Likewise. * gdb.hp/gdb.base-hp/reg-pa64.exp: Likewise. * gdb.hp/gdb.base-hp/reg.exp: Likewise. * gdb.hp/gdb.compat/xdb3.exp: Likewise. * gdb.hp/gdb.defects/bs15503.exp: Likewise. * gdb.hp/gdb.objdbg/objdbg01.exp: Likewise * gdb.hp/gdb.objdbg/objdbg02.exp: Likewise * gdb.hp/gdb.objdbg/objdbg03.exp: Likewise * gdb.hp/gdb.threads-hp/usrthbasic.exp: Likewise. * gdb.hp/gdb.threads-hp/usrthcore.exp: Likewise. * gdb.hp/gdb.threads-hp/usrthfork.exp: Likewise. * gdb.base/annota1.exp: Expect failure for hpux11 when posting a SIGTRAP to the inferior. 2001-12-19 Corinna Vinschen * gdb.asm/asm-source.exp: Drop setting link-flags for xstormy16. Substitute call to target_link by call to gdb_compile. Wed Dec 19 14:10:57 2001 Jeffrey A Law (law@redhat.com) * gdb.base/break.exp: Fix HP specific search string when testing backtracing in a called function. * gdb.base/constvars.exp: Only set lang to C++ if we're compiling the test with HP's compilers. * gdb.base/volatile.exp: Similarly. 2001-12-19 Jim Blandy * gdb.base/printcmds.exp: Expect the null character to be printed as '\0', and the '\013' to be printed as '\v'. * gdb.base/callfuncs.exp ("backtrace at nested call level 4"): Same. * gdb.base/setvar.exp: Same. 2001-12-17 Jim Blandy * gdb.base/completion.exp: Rather than completing very long filenames, which can make the readline library produce output we don't recognize, cd to the directory first, and then complete using nice, short relative paths. * gdb.base/completion.exp: On some systems, there is, in fact, a variable named `b' in scope, since GDB treats all static variables as being in scope. So use `no_var_named_this' instead of `b'. * gdb.base/corefile.exp: Recognize the message saying that GDB can't find the core file's registers as a failure. 2001-12-13 Jackie Smith Cashion * gdb.base/commands.exp (user_defined_command_test): Make "show user" test expect string more specific. 2001-12-13 Corinna Vinschen * gdb.asm/asm-source.exp: Add support for xstormy16. * gdb.asm/configure.in: Ditto. * gdb.asm/configure: Rebuild. * gdb.asm/xstormy16.inc: New file. 2001-12-10 Fred Fish * gdb.base/maint.exp: Update to match changes in type dumping code. 2001-12-10 Jim Blandy * gdb.asm/asm-source.exp (info symbol): Anchor the pattern matching the entry point symbol's name at the beginning of the line. 2001-12-07 Daniel Jacobowitz * gdb.c++/classes.exp, gdb.c++/derivation.exp, gdb.c++/inherit.exp, gdb.c++/method.exp, gdb.c++/namespace.exp, gdb.c++/templates.exp, gdb.c++/userdef.exp, gdb.c++/virtfunc.exp: Updates for v3 demangler and class layout support. 2001-12-07 Daniel Jacobowitz * gdb.c++/classes.exp: Add test for static member function. * gdb.c++/misc.cc: Add class with static member function. 2001-12-07 Jim Blandy If GDB says it can't find the struct the function returned, report those tests as `unsupported'. * gdb.base/call-rt-st.exp (print_struct_call): New function. Rewrite subsequent tests to use it. If GDB says it can't find the struct the function returned, report those tests as `unsupported'. * gdb.base/structs.exp (call_struct_func): New function. (do_function_calls): Use call_struct_func to call the functions returning structs. * gdb.base/callfuncs.exp: The stabs generated by GCC don't tell us whether functions are prototyped or not, so we can't possibly pass arguments to t_float_values2 properly. * gdb.base/break.exp: (test_next_with_recursion): Don't change the value of `timeout' for targets other than the mips*tx39-*. 2001-12-06 Michael Snyder * gdb.asm/asm-source.exp: Add tests for info target, info symbol, and detect whether the start symbol has a leading underscore. 2001-12-04 Jim Blandy * gdb.base/completion.exp: Clarify indentation. 2001-12-03 Jim Blandy * gdb.asm/s390.inc (gdbasm_datavar): Use `.long' to create `int' variables on the S/390, not `.word'. 2001-11-30 Jim Blandy Add assembly-source tests for s390-ibm-linux. * gdb.asm/s390.inc: New file. * gdb.asm/configure.in, gdb.asm/asm-source.exp: Add clauses for the S/390 architecture. * gdb.asm/configure: Regenerated. 2001-11-30 Michael Snyder * gdb.asm/asm-source.exp: Add tests for list, search, finish, return, next, info source, info sources, info line, global and static variables, and static functions. * gdb.asm/common.inc: New macro gdbasm_datavar (default definition). * gdb.asm/i386.inc: Override default definition of gdbasm_datavar. * gdb.asm/asmsrc1.s: Add a static function and some variables. * gdb.asm/asmsrc2.s: Make foo2 call foo3 twice (to test 'next'). * gdb.asm/d10v.inc (gdbasm_enter): Set up frame pointer. (gdbasm_leave): Restore frame pointer. (gdbasm_startup): Copy stack set-up from crt0.S. 2001-11-26 Fernando Nasser From 2001-11-12 Jackie Smith Cashion : * gdb.base/callfuncs.c (t_structs_a): Do not return a pointer to a local (non-static) variable. Copy tstruct.a to a static buffer and return a pointer to that buffer. * gdb.base/callfwmall.c (t_structs_a): Ditto. 2001-11-24 Mark Kettenis * gdb.asm/configure.in: Fix recognition of ix86 target. * gdb.asm/configure: Regenerate. 2001-11-21 Michael Snyder * gdb.asm/sparc.inc: New file. * gdb.asm/asm-source.exp: Recognize sparc target. * gdb.asm/configure.in: Recognize sparc target. * gdb.asm/configure: Regenerate. 2001-11-21 Michael Snyder * gdb.asm/m32r.inc: New file. * gdb.asm/asm-source.exp: Recognize m32r target. * gdb.asm/configure.in: Recognize m32r target. * gdb.asm/configure: Regenerate. 2001-11-20 Michael Snyder * gdb.asm/i386.inc: New file. * gdb.asm/asm-source.exp: Recognize ix86 target. * gdb.asm/configure.in: Recognize ix86 target. * gdb.asm/configure: Regenerate. * gdb.c++/namespace.exp: Fix quotes in output messages. 2001-11-14 Michael Snyder * gdb.base/code-expr.exp: New file. Tests use of the "@code" qualifier in a type cast expression, to designate an address in the instruction space (Harvard architecture). 2001-11-13 Michael Snyder * gdb.base/cvexpr.c, gdb.base/cvexpr.exp: New files. Tests for expressions using 'const' and 'volatile'. 2001-11-13 Corinna Vinschen * gdb.asm/asm-sources.exp: Allow defining linker flags. 2001-11-12 Daniel Jacobowitz * lib/mi-support.exp (mi_run_to_helper): Move comments outside of gdb_expect. 2001-11-11 Daniel Jacobowitz * lib/mi-support.exp: (mi_run_to_helper, mi_run_to, mi_step_to, mi_next_to, mi_continue_to, mi_finish_to, mi0_step_to, mi0_next_to, mi0_continue_to, mi0_finish_to, mi0_run_to): New functions. * gdb.mi/mi-simplerun.exp: Use them. * gdb.mi/mi0-simplerun.exp: Likewise. * gdb.mi/mi-var-cmd.exp: Likewise. * gdb.mi/mi0-var-cmd.exp: Likewise. 2001-11-10 Andrew Cagney * gdb.asm/asmsrc1.s: Add ``gdbasm_'' prefix to all macros. * gdb.asm/asmsrc2.s, gdb.asm/d10v.inc: Update. 2001-11-09 Andrew Cagney * gdb.base/restore.exp: Include $expected value in restored test message. 2001-11-09 Andrew Cagney * gdb.asm/asm-source.exp: Supress file, instead of skip, when not implemented. 2001-11-08 Michael Snyder * gdb.base/callfuncs.exp: Add tests for nested call dummies. Add pass/fail message for stop at breakpoint in call dummy function. 2001-11-07 Michael Snyder * gdb.c++/templates.exp (test_template_breakpoints): If we get an overload menu, but it does not match what we expect, we still need to issue the "cancel" command. * gdb.c++/templates.exp: Replace "void \\*" with "void ?\\*", making the whitespace optional. Argument for "new" may be "unsigned" as well as "unsigned int/long". * gdb.c++/templates.exp: Replace "const &" with "const ?&", making the whitespace optional. Also replace "(void) with "((void|)), making the keyword "void" optional. * gdb.c++/virtfunc.exp: Replace "const &" with "const ?&", making the whitespace optional. Also replace "(void) with "((void|)), making the keyword "void" optional. * gdb.base/callfuncs.c (t_float_values): This function must _not_ be prototyped, and the following function (t_float_values2) must be prototyped (if the compiler supports it), so that GDB can be tested against both cases. Usually one case involves promotion of float to double, while the other does not. * gdb.base/callfwmall.c: Ditto. * gdb.asm/asm-source.exp (bt ALL in foo2): Accept a backtrace that includes a stack frame for "start". 2001-11-05 Jim Blandy * gdb.stabs/weird.exp: Delete "p v_comb" test. It assumes that pointers are 32 bits long, and that offsets of relocs are always stored in the data (REL-style), and not in the reloc entry itself (RELA-style). * gdb.stabs/weird.def (v_comb, v_comb_shared): Remove symbols and stabs. 2001-11-01 Michael Snyder * gdb.c++/cplusfuncs.exp: Fix conflicts between operator names and regular expression operators by using quoting. 2001-10-31 Michael Snyder * gdb.c++/overload.exp: Select overloadfnarg(void) or overloadfnarg(), depending on what the symbol table contains. * gdb.c++/derivation.exp: Accept both "foo(void)" and "foo()" in the output of the ptype command. Similarly, accept both "const &" and "const&". 2001-10-31 Corinna Vinschen * gdb.base/miscexprs.c (main): Add usage of preprocessor symbol `STORAGE' to allow to choose the storage class of the local datastructures. * gdb.base/miscexprs.exp: Handle setting a `-DSTORAGE=...' compiler directive. 2001-10-30 Michael Snyder * gdb.base/jump.exp: Allow it to run for all targets. 2001-10-29 Corinna Vinschen * gdb.base/call-ar-st.c (print_double_array): Match for loop with new double_array size. (main): Change storage class of all local variables to static. Reduce size of double_array to 9. * gdb.base/call-ar-st.exp: Increase timeout value. Change expected output for double array to match new size in call-ar-st.c. 2001-10-29 Corinna Vinschen * gdb.base/ending-run.exp: Create identical output when passing `step to end of run' case. Add regular expression branch satisfying Stormy16 target. 2001-10-28 Mark Kettenis * gdb.base/interrupt.exp: Treat SIGILL similar to SIGSEGV such that we catch the expected failure under Linux/x86. 2001-10-29 Orjan Friberg * gdb.base/setvar.exp: Escape curly braces. * gdb.stabs/weird.exp: Ditto. 2001-10-27 Daniel Jacobowitz * gdb.mi/mi-hack-cli.exp: Remove excess newlines from test strings. * gdm.mi/mi0-hack-cli.exp: Likewise. 2001-10-25 Andrew Cagney * gdb.stabs/weird.exp: Unify ``variable VAR printed properly'' messages. 2001-10-21 Andrew Cagney * lib/mi-support.exp (mi_gdb_start): Don't require MI_OUT when checking MI enabled. 2001-10-09 Corinna Vinschen * gdb.base/maint.exp: Treat $EXEEXT as optional in output. 2001-10-04 Frank Ch. Eigler * lib/insight-support.exp (gdbtk_start): Don't exit dejagnu if gdb child process crashes, just signal an error. 2001-10-02 Jim Blandy * lib/gdb.exp (test_xfail_format): Simplify. * lib/gdb.exp (setup_xfail_format): Don't forget to put a `$' in front of the variable name `format'. Simplify `if'. 2001-10-01 Daniel Jacobowitz * gdb.threads/pthreads.exp: Wait for output and delay before sending ^C. 2001-10-01 Daniel Jacobowitz * gdb.mi/mi-var-display.exp (continue to incr_a): Recognize some incorrect output instead of timing out. * gdb.mi/mi-var-display.exp (continue to incr_a): Likewise. 2001-09-28 Corinna Vinschen * gdb.base/volatile.exp (local_compiler_xfail_check): Change qux2 check to allow additional `int'. 2001-09-27 Daniel Jacobowitz * gdb.base/completion.exp: Remove incorrect 'p "a' test. Add tests for 'p "break' (pass) and 'p "break.' (xfail). 2001-09-27 Michael Snyder * lib/gdb.exp (test_debug_format): New proc. (setup_xfail_format): Use new proc test_debug_format. * gdb.base/constvars.exp (local_compiler_xfail_check): New proc; use new service proc test_debug_format. Replace all other "gcc_compiled" tests with this test. * gdb.base/volatile.exp (local_compiler_xfail_check): New proc; use new service proc test_debug_format. Replace all other "gcc_compiled" tests with this test. 2001-09-27 Michael Snyder * gdb.base/cvexpr.exp: New file. * gdb.base/cvexpr.c: New file Test for expressions using const and volatile keywords. 2001-09-26 Corinna Vinschen * gdb.base/constvars.exp: Check for different orders of keywords and additional "int" strings in output. 2001-09-22 Andrew Cagney * gdb.base/maint.exp: Add "maintenance set/show" to list of valid responses from "help maint". 2001-09-19 Frank Ch. Eigler * lib/insight-support.exp (_gdbtk_xvfb_init): Set DISPLAY to localhost:NNN instead of :NNN, in case Xvfb is listening only on TCP. 2001-09-19 Corinna Vinschen * gdb.base/recurse.exp: When checking leaving the watchpoint scope, recognize when gdb is in function's epilogue and pass. 2001-09-18 Keith Seitz * lib/insight-support.exp (_gdbtk_export_target_info): Add support for running tests against sid targets. (gdbtk_done): Ditto. 2001-09-18 Corinna Vinschen * gdb.base/ending-run.c (main): Set stdout buffersize to the same reasonable value for any target. * gdb.base/ending-run.exp: Add a regular expression to make testsuite happy on Sanyo Stormy16 target. 2001-09-17 Corinna Vinschen * gdb.base/display.c (do_loops): Add float variable `f'. Increment f in loop. * gdb.base/display.exp: Increment timeout by 60 seconds. Change float display test to use variable `f'. 2001-09-17 Jim Blandy * gdb.base/restore.exp: Use temporary breakpoints, to avoid overflowing the limited breakpoint tables on some ROM monitors (like the ROM68K). 2001-09-15 Frank Ch. Eigler * lib/insight-support.exp (_gdbtk_xvfb_init): Start Xvfb with the "-ac" (disable access control) flag. 2001-08-30 Jeff Holcomb * gdb.base/remote.c: Use a small buffer for targets with 16-bit ints. 2001-08-30 Keith Seitz * lib/gdb.exp: Move all insight-related functionality into separate file. * lib/insight-support.exp: New file. 2001-08-29 Frank Ch. Eigler * config/sid.exp (sid_start): Never set sid verbosity; disable expect_background {} that consumed its stdout; tolerate * lib/mi-support.exp (mi_gdb_start): If a remote target, use the CLI jump command to start it. (mi_run_to_main): Fail immediatly when unexpected output. 2001-08-18 Andrew Cagney * lib/mi-support.exp (mi_gdb_start): Move call to sid_start to beginning of function. Fix PR gdb/191. 2001-08-16 Frank Ch. Eigler * config/sid.exp (sid_start): Don't warn if we cannot figure out what to force sid endianness to. 2001-08-15 Keith Seitz * lib/gdb.exp (gdbtk_start): Don't set environment variables for TCL_LIBRARY and friends. Insight will now figure these out for itself. 2001-08-02 Michael Snyder * gdb.base/completion.exp: Remove the symbol "a64l" from the expect string; this is target-specific, and not related to what is being tested. 2001-08-02 Dave Brolley * config/sid.exp: Rename gdb-socket to cpu-gdb-socket. 2001-07-25 Michael Snyder * gdb.base/consecutive.exp: New file. Test stepping over breakpoints on consecutive instructions. * gdb.base/consecutive.c: New file. * gdb.base/call-rt-st.exp: Use double-backslash to quote curly braces in regular expressions. 2001-07-25 Michael Snyder * gdb.base/ending-run.exp: Accept "Program exited normally" as legitimate output from stepping out of main. 2001-07-22 Keith Seitz * lib/gdb.exp (_gdbtk_xvfb_init): If GDB_DISPLAY is the empty string, do not run the tests. 2001-07-17 Stephane Carrez * gdb.base/long_long.exp: Detect size of pointer. Take into account 2-byte pointers when testing for p/a results. 2001-07-17 Stephane Carrez * gdb.base/remote.c (RANDOM_DATA_SIZE): New define, defaults to 48K and defined to 1K for m68hc11. (random_data): Reduce table to 1K for embedded platforms (68hc11). * gdb.base/remote.exp (get_sizeof): New function from sizeof.exp. (sizeof_random_data): New variable to tell the size of the data table; don't test past this size; always run to main. 2001-07-16 Stephane Carrez * gdb.base/return2.exp: return of long long and double fails for 68HC11; don't execute these tests on that platform. * gdb.base/return.exp: Return of a double fails for 68hc11. 2001-07-16 Stephane Carrez * call-ar-st.exp: Use gdb_skip_float_test to avoid executing tests that print a float. * call-rt-st.exp: Likewise. 2001-07-12 Mark Kettenis * gdb.base/so-impl-ld.exp: Remove stray space that prevented running this test on Linux. 2001-06-24 Michael Chastain * gdb.base/arithmet.exp: Remove some tests to make all test names unique. 2001-07-03 Michael Snyder * gdb.c++/classes.exp: Accept both "foo(void)" and "foo()" in the output of the ptype command. 2001-07-02 Michael Snyder * gdb.base/completion.exp: Don't assume that break.c is the only source file that may contain functions named "marker". * gdb.base/corefile.exp: Quote the curly braces in regexp. 2001-06-28 Andrew Cagney * gdb.disasm/Makefile.in (clean mostlyclean): Add h8300s to list of files to delete. From 2000-06-15 Kazu Hirata : * gdb.disasm/h8300s.exp: New file. gdb.disasm/h8300s.s: Likewise. 2001-06-27 Andrew Cagney * lib/mi-support.exp (mi_delete_breakpoints): Accept mi1 format empty breakpoint tables. 2001-06-25 Andrew Cagney * lib/mi-support.exp: Update args=... part of stop-reason patterns. Accept either a list or a tuple. 2001-06-23 Andrew Cagney * lib/mi-support.exp: Remove local emacs variable defining change-log-default-name. 2001-06-22 Michael Chastain * gdb.base/arithmet.exp: Use gdb_test instead of send_gdb/gdb_expect. This is operationally compatible with the previous version. 2001-06-13 Jim Blandy * lib/gdb.exp (gdb_test): Doc fix. 2001-06-10 Michael Chastain * gdb.base/exprs.exp: Remove a duplicate test. 2001-06-06 Jim Blandy * gdb.base/return2.exp (main): Use values to test float and double returns that are not NaN's, to avoid being confused by IEEE comparison rules. 2001-06-04 Michael Snyder * gdb.threads/pthreads.exp (check_control_c): Return 0 for success, non-zero if control_c fails. Terminate the test on failure, rather than wait for 12 more tests to time out. 2001-06-06 Jim Blandy * gdb.base/exprs.exp ("sizeof (long long) > sizeof (long) (true)"): Don't forget to match the GDB prompt. * gdb.trace/gdb_c_test.c, actions.c: Fix misspellings. 2001-06-04 Jim Blandy * gdb.base/help.exp: Update pattern to exclude `print-load-map' command. 2001-05-31 Kevin Buettner * gdb.base/annota1.exp (info break): Match four or more spaces after "Address". 2001-05-31 Michael Chastain * gdb.c++/cplusfuncs.cc (dm_type_char_star): Remove superfluous cast. (dm_type_int_star): Likewise. (dm_type_long_star): Likewise. (dm_type_void_star): Likewise. 2001-05-29 Kevin Buettner * gdb.base/completion.exp (INPUTRC): Set this environment variable to a known value in order to get consistent results regardless of the setting of INPUTRC or the presence or contents of .inputrc. 2001-05-24 Michael Snyder * gdb.threads/linux-dp.exp: Remove assumptions about thread ordering. Don't require that the main thread and the manager thread are the first in the list. * gdb.threads/pthreads.exp (test_startup): Relax test for thread debugging. If test fails, issue an "unsupported" not a "fail". 2001-05-24 Jim Blandy Don't assume that short is shorter than int. * gdb.base/exprs.exp ("print unsigned short == (~0)"): Don't assume that shorts are smaller than ints. On a 16-bit machine, this isn't true. ("print unsigned char == (~0)"): Add test that verifies that ~0, an int, is not equal to ~0 stored in an unsigned char. This tests the same thing that the previous test meant to, but works on 16-bit machines, too. ("print unsigned char != (~0)"): Same test, complemented. 2001-05-24 Michael Snyder * gdb.threads/pthreads.exp (all_threads_running): Add an explicit test for (full_coverage == 0). This makes the test run faster, and prevents dejagnu getting out of step. 2001-05-23 Kevin Buettner * gdb.base/finish.exp (finish_void): Revise pattern for stopping on the call statement to not permit stopping at the start of the instructions comprising the call sequence. 2001-05-19 Michael Chastain * gdb.base/callfuncs.exp: Make all test names unique. * gdb.base/commands.exp: Make all test names unique. * gdb.base/condbreak.exp: Make all test names unique. * gdb.base/dbx.exp: Make all test names unique. * gdb.base/default.exp: Make all test names unique. * gdb.base/define.exp: Make all test names unique. Conform some FAIL and TIMEOUT messages to their corresponding PASS message. * gdb.base/ending-run.exp: Make all test names unique. * gdb.base/long_long.exp: Remove duplicate test. 2001-05-21 Kevin Buettner * gdb.base/finish.exp (finish_void): Allow "finish" command to stop on the call statement as well as the statement after the call. 2001-05-21 Michael Snyder * gdb.base/long_long.exp: Allow for targets with 4-byte short. 2001-05-10 Elena Zannoni * gdb.base/completion.exp: Revamp test. Make it execute on all platforms. 2001-05-10 Elena Zannoni * config/gdbserver.exp (gdb_load): Handle the case in which the arguments to gdbserver are given in the baseboard configuration file. Also handle the case in which the server needs to do a load. 2001-05-07 Keith Seitz * lib/gdb.exp (gdbtk_initialize_display): New proc which will set up the display for testing. (gdbtk_start): Convert all paths to paths that tcl will like. Export target information to environment. (_gdbtk_xvfb_init): New proc to start Xvfb if available and necessary. (_gdbtk_xvfb_exit): New proc to kill Xvfb if necessary. (to_tcl_path): New proc to convert a given pathname into a path acceptible as an argument to a tcl command. (_gdbtk_export_target_info): New proc to export target info into the environment for gdbtk testing. (gdbtk_done): New proc to signal end-of-test. 2001-05-06 Jim Blandy * restore.c: Make the code of caller0 correspond to its comment. 2001-05-03 Michael Snyder * config/sid.exp (gdb_target_sid): Check for error messages. On error or timeout, don't make expect exit (which will terminate all subsequent tests); instead just make gdb exit. (gdb_load): Check for error messages. On error or timeout, return a negative value. 2001-04-24 Jim Blandy * gdb.c++/templates.exp: If we see the prompt for the overload list, but we haven't recognized any of the longer patterns, arrange for this test to fail, not hang. * gdb.c++/classes.exp (ptype class A): Tolerate whitespace variations. 2001-04-22 Michael Chastain * gdb.c++/local.exp: Use the 'runto' library function. * gdb.c++/namespace.exp: Likewise. * gdb.c++/overload.exp: Likewise. 2001-03-26 Kevin Buettner * gdb.base/Makefile.in (EXECUTABLES): Add step-line. * gdb.base/step-line.exp: New file. Test step/next in presence of #line directives. * gdb.base/step-line.c: New file. Test program for the above. * gdb.base/step-line.inp: New file. We pretend that this file has been transformed by some other tool into step-line.c. 2001-03-21 Jim Blandy * gdb.c++/userdef.exp: Check that GDB tolerates whitespace in unmangled operator names. 2001-03-20 Jim Blandy * gdb.threads/linux-dp.exp: Recognize an additional message generated by GDB when it doesn't understand how to debug threads on the target system. 2001-03-19 Andrew Cagney * gdb.mi/mi-console.exp: Document ``Hello'' as a known bug. 2001-03-12 Michael Chastain * gdb.c++/derivation.exp: Use the 'runto' library function. 2001-03-12 Michael Chastain * gdb.c++/annota2.exp: Fix regular expression for "post-query". 2001-02-24 Michael Chastain * gdb.c++/ref-types.exp: Change handwritten code to library function 'runto'. 2001-03-16 Orjan Friberg * gdb.base/signals.exp: Set count to 0 explicitly. 2001-03-15 Mark Salter * config/monitor.exp (gdb_target_cmd): Add explicit error return. (gdb_target_monitor): Add check of gdb_target_cmd return value. (gdb_load): Add support for additional target_info: gdb_download_size and gdb_load_timeout. Thu Mar 8 16:06:00 2001 David Taylor * gdb.base/annota1.exp: Move test of isnative to earlier in the file -- to prevent failing when the compile fails but we have no intention of running the tests anyway. * gdb.base/long_long.exp: Test target_info for no_long_long, skip tests if set. * gdb.base/maint.exp: Support 2 byte integers as well as 4 byte integers. * gdb.c++/ctti.exp: Skip tests if skip_cplus_tests returns true. * gdb.c++/namespace.exp: Ditto. 2001-03-07 Orjan Friberg * gdb.base/pointers.c: Don't assume doubles are >= 8 bytes. * gdb.base/pointers.exp: Relax pattern match of decimals. 2001-03-06 Kevin Buettner * Makefile.in, config/abug.exp, config/cfdbug.exp, config/cpu32bug.exp, config/dve.exp, config/est.exp, config/gdbserver.exp, config/hmsirom.exp, config/hppro.exp, config/i960.exp, config/m32r.exp, config/mn10300-eval.exp, config/monitor.exp, config/proelf.exp, config/rom68k.exp, config/sh.exp, config/sid.exp, config/slite.exp, config/sparclet.exp, config/udi.exp, config/unknown.exp, config/vr4300.exp, config/vr5000.exp, config/vx.exp, config/vxworks.exp, config/vxworks29k.exp, gdb.asm/asm-source.exp, gdb.base/a2-run.exp, gdb.base/all-bin.exp, gdb.base/annota1.exp, gdb.base/arithmet.exp, gdb.base/assign.exp, gdb.base/async.exp, gdb.base/attach.exp, gdb.base/bitfields.exp, gdb.base/bitops.exp, gdb.base/break.exp, gdb.base/call-ar-st.exp, gdb.base/call-rt-st.exp, gdb.base/call-strs.exp, gdb.base/callfuncs.exp, gdb.base/callfwmall.exp, gdb.base/commands.exp, gdb.base/completion.exp, gdb.base/cond-expr.exp, gdb.base/condbreak.exp, gdb.base/constvars.exp, gdb.base/corefile.exp, gdb.base/dbx.exp, gdb.base/default.exp, gdb.base/define.exp, gdb.base/display.exp, gdb.base/ena-dis-br.exp, gdb.base/ending-run.exp, gdb.base/environ.exp, gdb.base/eval-skip.exp, gdb.base/exprs.exp, gdb.base/finish.exp, gdb.base/foll-exec.exp, gdb.base/foll-fork.exp, gdb.base/foll-vfork.exp, gdb.base/funcargs.exp, gdb.base/help.exp, gdb.base/interrupt.exp, gdb.base/jump.exp, gdb.base/list.exp, gdb.base/logical.exp, gdb.base/long_long.exp, gdb.base/maint.exp, gdb.base/mips_pro.exp, gdb.base/miscexprs.exp, gdb.base/nodebug.exp, gdb.base/opaque.exp, gdb.base/overlays.exp, gdb.base/page.exp, gdb.base/pointers.exp, gdb.base/printcmds.exp, gdb.base/ptype.exp, gdb.base/radix.exp, gdb.base/recurse.exp, gdb.base/regs.exp, gdb.base/relational.exp, gdb.base/remote.exp, gdb.base/reread.exp, gdb.base/restore.exp, gdb.base/return2.exp, gdb.base/scope.exp, gdb.base/sect-cmd.exp, gdb.base/selftest.exp, gdb.base/setshow.exp, gdb.base/setvar.exp, gdb.base/shlib-call.exp, gdb.base/sigall.exp, gdb.base/signals.exp, gdb.base/sizeof.exp, gdb.base/so-impl-ld.exp, gdb.base/so-indr-cl.exp, gdb.base/solib.exp, gdb.base/step-test.exp, gdb.base/structs.c, gdb.base/structs.exp, gdb.base/structs2.exp, gdb.base/term.exp, gdb.base/twice.exp, gdb.base/varargs.exp, gdb.base/volatile.exp, gdb.base/watchpoint.exp, gdb.base/whatis-exp.exp, gdb.base/whatis.exp, gdb.c++/ambiguous.exp, gdb.c++/annota2.exp, gdb.c++/anon-union.exp, gdb.c++/classes.exp, gdb.c++/ctti.exp, gdb.c++/derivation.exp, gdb.c++/inherit.exp, gdb.c++/local.exp, gdb.c++/member-ptr.exp, gdb.c++/method.exp, gdb.c++/misc.exp, gdb.c++/namespace.exp, gdb.c++/overload.exp, gdb.c++/ref-types.exp, gdb.c++/templates.exp, gdb.c++/userdef.exp, gdb.c++/virtfunc.exp, gdb.disasm/am33.exp, gdb.disasm/hppa.exp, gdb.disasm/mn10200.exp, gdb.disasm/mn10300.exp, gdb.fortran/types.exp, gdb.java/jmisc.exp, gdb.java/jv-exp.exp, gdb.java/jv-print.exp, gdb.stabs/weird.exp, gdb.threads/linux-dp.exp, gdb.trace/actions.exp, gdb.trace/backtrace.exp, gdb.trace/circ.exp, gdb.trace/collection.exp, gdb.trace/deltrace.exp, gdb.trace/infotrace.exp, gdb.trace/limits.exp, gdb.trace/packetlen.exp, gdb.trace/passc-dyn.exp, gdb.trace/passcount.exp, gdb.trace/report.exp, gdb.trace/save-trace.exp, gdb.trace/tfind.exp, gdb.trace/tracecmd.exp, gdb.trace/while-dyn.exp, gdb.trace/while-stepping.exp, lib/gdb.exp, lib/mi-support.exp: Update/correct copyright notices. 2001-02-27 Michael Snyder * gdb.base/varargs.c (find_max_double): Fix printf format string: first arg is int not float. 2001-02-22 Michael Snyder * gdb.base/reread.exp: Unsupported for non-native targets; doesn't work for remote debugging. 2001-02-19 Fernando Nasser From Drew Moseley * gdb.base/ending-run.exp: Properly handle the BSP state when stepping past the end of main. 2001-02-19 John Moore * gdb.base/commands.exp (infrun_breakpoint_command_test): Converted HPUX fix for non-expected items following multiple step commands into general solution for all platforms. 2001-02-18 Michael Chastain * gdb.c++/classes.exp (do_tests): Change runto statements from "runto 'foo(void)'" to "runto 'foo'". This makes the statements demangler agnostic. * gdb.c++/virtfunc.exp (do_tests): Likewise. (gdb_virtfunc_restart): Likewise. 2001-02-14 Michael Chastain * gdb.c++/inherit.exp (do_tests): Change runto statements from "runto 'foo(void)'" to "runto 'foo'". This makes the statements demangler agnostic. Sun Feb 4 17:32:21 2001 Andrew Cagney * gdb.threads/pthreads.exp: Unify pass/fail messages for ``continue to bkpt at common_routine in thread 2'' and ``stopped before calling common_routine 15 times'' tests. 2001-02-11 Michael Chastain * gdb.c++/cplusfuncs.cc (dm_type_char_star): New function. Helps the test script figure out which demangler is in use. (dm_type_foo_ref): Ditto. (dm_type_int_star): Ditto. (dm_type_long_star): Ditto. (dm_type_unsigned_int): Ditto. (dm_type_void): Ditto. (dm_type_void_star): Ditto. * gdb.base/cplusfuncs.exp (probe_demangler): New function. Probe the gdb demangler and set variables to accommodate formatting differences. (info_func_regexp): New function. Same as info_func, but matches against a regexp. (info_func): Match against a literal string. (print_addr_2): New function. Match against a literal string, which can be different from the input to gdb. (print_addr): Simply call print_addr_2 with the same argument twice. (test_lookup_operator_functions): Use demangler formatting variables. Blow away the xfails and workarounds for gnats gdb bug gdb/18. Sort the tests in the same order as the C++ class declaration. (test_paddr_operator_functions): Ditto. (test_paddr_overloaded_functions): Ditto. (test_paddr_hairy_functions): Use demangler formatting variables. Add reference to gdb/19 for related tests. (do_tests): Call probe_demangler. 2001-01-30 Kevin Buettner * gdb.c++/templates.cc (printf): Remove unused function definition. 2001-01-26 Felix Lee * sid.exp (sid_exit): Pass host, not target, to remote_close. 2001-01-25 matthew green * config/sid.exp (sid_start): Call `remote_push_conn' after firing up sid. (sid_exit): Call `remote_pop_conn' after GDB is gone. 2001-01-25 matthew green * config/sid.exp (sid_start): Use `remote_spawn' instead of `spawn.' Deprecate $sid_spawn_id. (sid_exit): Remove code necessary only for `spawn.' 2001-01-25 matthew green * config/sid.exp (sid_start): Handle sim,protocol of `sid.' 2001-01-28 Michael Chastain * gdb.c++/ovldbreak.exp (take_gdb_out_of_choice_menu): New proc to call when tests fail. It takes gdb out of the overloaded function choice menu back to the main prompt, so that the test program stays synchronized. (set_bp_overloaded): New proc to collect all the common code for setting a breakpoint on an overloaded name. Calls take_gdb_out_of_choice_menu when needed. (menu_overload1arg): New variable to collect the repeated instances of the expected menu for an overloaded name. Change the regular expression to handle changes in g++ type encoding: "void" can be either "void" or "", and "unsigned int" can be either "unsigned int" or "unsigned". (continue_to_bp_overloaded): Change regular expressions to handle changes in g++ type encoding. (no proc): Call take_gdb_out_of_choice_menu when needed. Remove redundant calls to "info break". Accept either "canceled" or "cancelled". Change regular expressions in "info break" calls to handle changes in g++ type encoding. Give all tests unique strings. 2001-01-17 Ben Elliston * config/sid.exp: New file. Fri Jan 12 18:29:01 2001 Andrew Cagney * gdb.base/callfuncs.exp: Add space after ``Value returned is''. 2000-12-21 Michael Snyder * gdb.base/finish.exp: Accept '1' instead of \001 from char_func. Add a RE to accept a non-ascii char if one is ever presented. 2000-12-20 Fernando Nasser * lib/mi-support.exp (mi_gdb_start): Test for MI_OUT, not UI_OUT. 2000-12-18 Michael Snyder * gdb.base/setvar.exp: Use double '\\' to quote curly braces in regexp. One '\' does not suffice on Linux. 2000-12-09 Michael Chastain * gdb.base/break.exp (test_clear_command): Use a marker function rather than 'main' for the test function. Also move this test to an execution point where the marker function names are guaranteed to be bound to functions. (Executing tests after a 'finish' from main runs into name conflicts with local names in __libc_start_main). 2000-12-07 Michael Snyder * gdb.base/finish.exp: New test for gdb's "finish" command. * gdb.base/return2.exp: New test for gdb's "return" command. * gdb.base/return2.c: New source file for above. 2000-12-05 Michael Snyder * gdb.base/constvars.exp: Add a "pass" message if "up" succeeds. * gdb.base/miscexprs.exp: Ditto. * gdb.base/pointers.exp: Ditto. * gdb.c++/derivation.exp: Ditto. * gdb.c++/local.exp: Ditto. * gdb.c++/namespace.exp: Ditto. * gdb.c++/overload.exp: Ditto. * gdb.c++/ref-types.exp: Ditto. 2000-12-05 Michael Snyder * gdb.base/constvars.exp: Test result of "up" command. * gdb.base/miscexprs.exp: Ditto. * gdb.base/pointers.exp: Ditto. * gdb.base/scope.exp: Ditto. * gdb.c++/derivation.exp: Ditto. * gdb.c++/local.exp: Ditto. * gdb.c++/namespace.exp: Ditto. * gdb.c++/overload.exp: Ditto. * gdb.c++/ref-types.exp: Ditto. 2000-11-22 Michael Chastain * mips_pro.exp: Accept either "middle -> top -> main" or "middle -> main" in the backtrace, because gcc can optimize tail calls to jumps. Remove setup_xfail for the hppa case. Add a comment with the original warning messages from PR 3016, which was filed in 1993, to preserve them for posterity. 2000-11-17 Nick Duffek * lib/gdb.exp (gdb_test): Override timeout with board info. 2000-11-17 Nick Duffek * gdb.base/display.exp: Don't kill running stub. Add "again" to the second kill and detach messages. 2000-11-17 Nick Duffek * configure.in: Add AC_EXEEXT. * configure: Regenerate. * Makefile.in (just-check): Export EXEEXT. * lib/gdb.exp ($EXEEXT): Import from environment. * gdb.base/maint.exp: Expect $EXEEXT in executable name. Don't expect "maint dump-me" on Cygwin. * gdb.base/reread.exp ($binfile, $binfile1, $binfile2): Append $EXEEXT. 2000-11-17 Nick Duffek * gdb.base/break.exp: Test backtrace and finish from called function on all platforms, not just HP-UX. 2000-11-03 Michael Snyder * config/monitor.exp (gdb_target_cmd): Abstracts some of the code from gdb_target_monitor, so it can be used independantly for gdbserver. Also comment out an unnecessary PUTS. 2000-11-03 Michael Snyder * gdb.base/a2-run.exp: Use gdb_skip_stdio_test. * gdb.base/corefile.exp: Expect the message "Program is being debugged already" when we send the "corefile" command, since the preceeding gdb_load may have connected gdb to a remote target. * gdb.base/display.exp: Disable hardware watchpoints if new board info variable "no_hardware_watchpoints" is true. Replace single-letter commands with more readable ones. * gdb.base/recurse.exp (recurse_tests): Disable hardware watchpoints if new board info variable "no_hardware_watchpoints" is true. * gdb.base/restore.exp (restore_tests): Call gdb_skip_stdio_tests to see if stdio (printf) testing is possible. * gdb.base/watchpoint.exp: Disable hardware watchpoints if new board info variable "no_hardware_watchpoints" is true. Use new proc "gdb_skip_stdio_tests" to see if printf tests are possible. 2000-11-13 Fernando Nasser From Orjan Friberg : * gdb.base/printcmds.exp: Escape curly braces followed by a number in array print pattern match. 2000-11-09 Fernando Nasser * gdb.c++/templates.exp (test_template_breakpoints): Change Britsh spelling "cancelled" to U.S. spelling "canceled" to match changes made to gdb. * gdb.c++/ovldbreak.exp: Ditto. 2000-11-06 Peter Schauer * gdb.base/callfuncs.c (main): Moved to end of file, call t_double_values to initialize the FPU before inferior calls are made. * gdb.base/callfuncs.exp: Test for register preservation after calling inferior functions. Add tests for continuining, finishing and returning from a stop in a call dummy. 2000-10-24 Michael Snyder * gdb.base/commands.exp: Break up long lines, and re-indent. 2000-10-19 Michael Snyder * config/gdbserver.exp: Rewritten from the ground up, to make it compatible with the current dejagnu tree, and to make it work with the new "gdbserver" in libremote. 2000-10-16 Michael Snyder * gdb.base/sizeof.exp (check_sizeof): Skip if no printf support. * gdb.base/varargs.exp: Skip entire test if no printf support. * gdb.base/ending-run.exp (Step to return): Skip if no printf supt. * gdb.base/shlib-call.exp: Skip several tests if no printf support. 2000-10-13 Michael Snyder * lib/gdb.exp (gdb_skip_float_test): New proc. Skip test if no floating point support. (gdb_skip_stdio_test): New proc. Skip test if no stdio support. * gdb.base/call-ar-st.exp: Use above procs to skip tests. * gdb.base/call-rt-st.exp: Ditto. * gdb.base/call-strs.exp: Ditto. 2000-08-02 Jimmy Guo * gdb.base/sizeof.c: include . * gdb.c++/classes.exp: Use gdb_test instead of send_gdb to 'finish', otherwise uncaptured gdb_prompt would potentially throw remaining test points out of sync. 2000-07-26 Scott Bambrough * gdb.base/recurse.exp: Run tests for all targets. * gdb.base/so-impl-ld.exp: Added wildcard to handle the gnu-oldld case on ARM. * gdb.base/watchpoint.exp (test_stepping): Clear xfail for ARM targets. Mon Jul 24 07:46:02 CDT 2000 Clinton Popetz * gdb.java/configure.in (AC_INIT): Use jmisc.exp. * gdb.java/configure: Rebuild. Sun Jul 23 21:42:34 2000 Anthony Green * gdb.java/jv-exp.exp: New file. Sun Jul 23 21:02:42 2000 Anthony Green * configure: Rebuilt. * configure.in (configdirs): Add gdb.java. * gdb.java/jmisc.java: New file. * gdb.java/jmisc.exp: New file. * gdb.java/Makefile.in: New file. * gdb.java/configure: Rebuilt. * gdb.java/configure.in: New file. * lib/java.exp: New file. Wed Jul 12 18:14:29 2000 Andrew Cagney * gdb.base/exprs.exp: Test casts to a pointer including over and underflow. Thu Jul 13 11:52:53 2000 Andrew Cagney * gdb.base/sizeof.exp, gdb.base/sizeof.c: New files. Compare GDB and the compilers sizes. 2000-07-09 Nick Duffek * gdb.c++/misc.cc (class ClassParam, class_param): Define. (use_methods): New function. (main): Call use_methods(). * gdb.c++/classes.exp (test_method_param_class): New procedure. (do_tests): Call test_method_param_class. 2000-07-09 Nick Duffek * gdb.c++/classes.exp (test_nonexistant_members): Fix name spelling. (test_enums): New procedure. Move enum tests from end of script to here. Set breakpoint on function name instead of line number. * gdb.c++/misc.cc (ClassWithEnum): Move past Foo definitions. (enums2): New marker function. (enums1): New function. (main): Call enums1(). Move enum tests to enums1(). Tue Jul 4 03:43:49 2000 Andrew Cagney * gdb.asm/asm-source.exp: Use raw AS/LD instead of CC to compile/link program. Update line numbers. * gdb.asm/d10v.inc: Define ``startup''. * gdb.asm/asmsrc1.s: Add definition of _start. Fri Jun 23 17:45:52 2000 Andrew Cagney * gdb.base/call-ar-st.exp: More rewrites of multi-line patterns. 2000-06-18 Elena Zannoni * gdb.base/maint.exp: Add 'maint print architecture' item to output of 'help maint print' command. Fri Jun 16 18:22:05 2000 Andrew Cagney * gdb.base/call-ar-st.exp: Rewrite all multi-line patterns so that they use gdb_expect_list. Wed Jun 7 13:02:40 2000 Andrew Cagney * gdb.base/commands.exp: Use ``set remote memory-read-packet-size'' instead of ``set endian big'' to test long commands. 2000-06-03 Daniel Berlin * gdb.c++/templates.exp (do_tests): Make all of these work under g++, and stop skipping them. * gdb.c++/namespace.exp: Move from gdb.hp/gdb.aCC to here, make it work under g++. * gdb.c++/misc.cc: Fix ambiguous initialization with correct initialization. 2000-06-02 Michael Snyder * gdb.base/annota1.exp (run until main breakpoint): Loosen up the regular expression: accept an (almost) arbitrary sequence of "frames-invalid" and "breakpoints-invalid" messages both before and after the "starting" message. 2000-06-02 Michael Snyder * gdb.c++/local.exp: This test has never been known to work with g++. 2000-05-18 Michael Snyder * gdb.base/annota1.exp (annotate-signal-handler-caller): Relax the regular expression a little, make it pass on Solaris 8. 2000-05-12 Kevin Buettner * gdb.base/step-test.exp: On IA-64 targets, when stepping out of a call, do not require that gdb stop on the line after the call. Instead, it is permissible for gdb to stop on the line of the call itself. 2000-05-12 Michael Snyder * gdb.base/break.exp (bp on small function, optimized file): Add a second pass pattern. The behavior differs here between stabs and dwarf for one-line functions. Stabs preserves two line symbols (one before the prologue and one after) with the same line number, but dwarf regards these as duplicates and discards one of them. Therefore the address after the prologue (where the breakpoint is) has no exactly matching line symbol, and GDB reports the breakpoint as if it were in the middle of a line rather than at the beginning. 2000-05-08 Michael Snyder * gdb.base/interrupt.exp: Make "pass" message say "send" rather than "send_gdb" (for consistancy). Mon May 1 15:37:58 2000 Andrew Cagney From 2000-04-28 Andreas Jaeger : * gdb.c++/templates.cc: Properly check for GCC version number. * lib/compiler.cc: Likewise 2000-04-28 Michael Snyder * gdb.base/break.exp: When compiled with -O2 optimization, gdb may not stop at the first line of main, due to code motion. 2000-04-26 Michael Snyder * gdb.base/call-ar-st.exp: Bail out if target is sparclet. This test depends on parsing the printf output from the target. Since the sparclet stub doesn't do stdio, this will never work. * gdb.base/call-rt-st.exp: ditto. * gdb.base/call-strs: ditto. 2000-04-24 Michael Snyder * gdb.base/miscexprs.exp: make sizeof long array test portable. * gdb.base/ending-run.exp: After connecting to a remote target, but before running, the target will appear to be in a random location. Specify both a file and a line for breakpoints. Also, the function that calls main may be called 'init' rather than 'start'. 2000-04-17 Elena Zannoni * gdb.base/help.exp: Update output for add-symbol-file command. 2000-04-10 Fernando Nasser From Franz Sirl * gdb.base/structs2.c: Support platforms defaulting to a unsigned char. 2000-04-07 J.T. Conklin * gdb.base/call-ar-st.exp: Relax patterns matching tab characters. * gdb.base/funcargs.exp: Relax patterns matching pointers to char. Thu Mar 30 13:26:19 2000 Philippe De Muyter * gdb.base/call-ar-st.c (init_small_structs, main): Use floating-point values that can be represented exactly. * gdb.base/call-ar-st.exp (print print_small_structs): Fixed to match above change, and to not check against the directory part of the source file name. (step into print_long_arg_list): Likewise. (print print_small_structs from print_long_arg_list): Likewise. (print print_long_arg_list): Likewise. 2000-03-27 Elena Zannoni * gdb.base/printcmds.c: Terminate char array ctable2 with 0. Mon Mar 27 14:46:37 2000 Andrew Cagney * ChangeLog, gdb.base/commands.exp: Revert whitespace changes. 2000-03-25 Daniel Berlin * gdb.base/commands.exp (deprecated_command_test): Add test for deprecate with no arguments. 2000-03-24 Jonathan Larmour * gdb.base/break.exp: Add new test for setting breakpoints on optimized code so we can test breakpoints work even when function prologues may be optimized away 2000-03-23 Fernando Nasser From David Whedon * gdb.base/commands.exp : Added command deprecator tests. 2000-03-22 Daniel Berlin * gdb.base/help.exp: Added test for new apropos command. 2000-03-21 Kevin Buettner * gdb.base/pointers.c (usevar): New function. (main): Make sure that global variables v_int_pointer2, rptr, and y are all referenced someplace in the program by calling usevar() on them. [Some linkers delete symbols which are never referenced. The space remains, but there's no way to get a (symbolic) handle on the variable from the debugger.] 2000-03-14 Elena Zannoni * gdb.base/printcmds.c: Add typedeffed arrays. * gdb.base/printcmds.exp (test_print_typedef_arrays): New procedure to test arrays that are typedef'd. 2000-03-13 James Ingham * lib/gdb.exp: Fix the gdbtk_start routine to correctly find all the library directories. Mon Feb 21 13:05:36 2000 Andrew Cagney * configure.in (configdirs): Add sub directory gdb.mi. * configure: Re-generate. * gdb.mi: New directory. 2000-02-25 Scott Bambrough * gdb.base/long_long.exp: Correct test suite failure when printing a long long value as a double on ARM platforms. 2000-02-16 Jim Blandy * gdb.base/break.exp ("breakpoint line number"): Make sure the default source file is set properly before running this test. 2000-02-14 Elena Zannoni * lib/gdb.exp: Tell the testsuite that now gdbtk is in the gdbtk/library directory, not in gdbtcl2. 2000-02-04 Jim Blandy * gdb.c++/templates.exp: ("ptype T5"): Remove extraneous backslash from regexp pattern. * gdb.c++/ovldbreak.exp (continue_to_bp_overloaded): New procedure. Use it to run all the "continue to bp overloaded" tests. Note that this changes the names of the tests slightly. If the breakpoint hit message includes a hex PC value, because GCC's Dwarf 2 line info doesn't help us distinguish the prologue from the real source code, still consider that a pass. * gdb.base/condbreak.exp ("run until breakpoint at marker2"): XFAIL here if the breakpoint message contains a hex address. Note similar change on 1999-11-02. * gdb.base/step-test.exp: Comment Fernando's change of 2000-02-02. * gdb.base/ptype.exp: Establish a default source file before calling get_debug_format. 2000-02-03 Fernando Nasser * gdb.base/watchpoint.exp: Remove duplication of test messages. 2000-02-02 Fernando Nasser * gdb.base/step-test.exp: Fix the steps to enter a callee by means of successive stepi commands -- while in the prologue we should see the function entry bracket. 2000-02-02 Fernando Nasser * gdb.base/ending-run.exp: Add ARM in thumb mode case, where we reach __change_mode() when stepping through the end of main(). 2000-01-17 Fernando Nasser * gdb.base/default.exp: Fix expected pattern. * gdb.base/help.exp: Same. 2000-01-10 Elena Zannoni * gdb.base/so-indr-cl.exp: Don't execute the test if not on HPUX. Don't use xfail's because that affects only the following test. * gdb.base/so-impl-ld.exp: Don't execute the tests if not on hpux, solaris or linux. * gdb.base/selftest.exp: Update to reflect changes to main.c. 2000-01-07 Michael Snyder * gdb.base/display.exp: Some yacc parsers like to say "A syntax error" rather than "A parse error". Accept both. 2000-01-06 Fernando Nasser * gdb.base/default.exp: Remove OS dependent string from "target remote" test. * gdb.base/help.exp: Same for "help target remote" test. 2000-01-04 Elena Zannoni From Jim Kingdon : * gdb.c++/annota2.exp: Fix "delete bps" test to wait for the prompt (cleanup rather than necessity, but still might keep output from spilling to next test). 2000-01-02 Fred Fish * gdb.base/ptype.c (FALSE, TRUE): #undef these to avoid clash on AIX, which defines them in . 1999-12-16 Stan Shebs * gdb.base/default.exp: Match arm* etc instead of arm in "info float" test. 1999-12-13 Fernando Nasser * gdb.base/watchpoint.exp: Add missing "(timeout)" to test message. * gdb.base/break.exp: Add missing anchor to reg exp on "finish from outermost frame disallowed". 1999-12-09 Fernando Nasser * gdb.base/setvar.exp: New tests for setting the value of a struct with a constant list. 1999-12-08 Fernando Nasser * gdb.base/setvar.exp: Remove pair os tests that expected gdb to require the user to type a cast before setting the value of a struct. 1999-12-06 Jim Blandy * gdb.base/default.exp: Expect the new 'info float' command on all i386 platforms. * gdb.threads/linux-dp.exp: Expand our ability to recognize LinuxThreads libraries that don't support debugging. Sat Dec 4 15:21:18 1999 Andrew Cagney * gdb.base/remote.c: Fill the buffer with truely random data. Change the buffer type to ``unsigned char'' to simplify size arithmetic. * gdb.base/remote.exp: Reduce download numbers by one. Typical stub only handles 400-1 byte packets. Verify that the download worked. 1999-11-30 Fernando Nasser * lib/gdb.exp (gdb_expect_list): FAIL only once on multiple pattern tests, using UNRESOLVED for the untested cases. Also, does not wait for a timeout if the prompt was received before a recognizable pattern. 1999-11-29 Fernando Nasser * lib/gdb.exp (gdb_expect_list): Fix spelling. 1999-11-29 Elena Zannoni * gdb.base/watchpoint.exp: Add tests cases for the hit count of watchpoints. 1999-11-24 Jason Merrill * gdb.base/condbreak.exp: Add missing '$gdb_prompt $'. * gdb.c++/local.exp: Be more flexible in recognizing local class name mangling. Don't allow horribly truncated method names. * gdb.c++/derivation.exp: Expect protected inheritance. * gdb.c++/inherit.exp: Be more flexible in recognizing vbase pointers. * gdb.c++/virtfunc.exp: Likewise. * gdb.c++/classes.exp: Likewise. Don't require the enclosing scope when printing a nested enum. 1999-11-22 Jim Blandy * gdb.base/step-test.exp: Properly await GDB's response to setting a breakpoint on the call to large_struct_by_value. * gdb.base/ending-run.exp ("step to end of run 1"): Don't fail just because we have debug info for the `start' function. 1999-11-19 Jim Blandy * gdb.threads/linux-dp.exp ("create philosopher"): Recognize the "Unknown signal" messages, which indicate (on LinuxThreads) that GDB doesn't know how to debug threads on this system. This is better than hanging while philosopher 0 dumps chatter into gdb.log. 1999-11-18 Tom Tromey * gdb.trace/deltrace.exp: Updated test to reflect new error text. 1999-11-18 Fred Fish * gdb.base/coremaker2.c: Add sample program for generating cores that is more self contained than coremaker.c. Eventually I'll add more code to this and tie it into the testsuite. 1999-11-12 Stan Shebs * gdb.base/dollar.exp: Remove, now in gdb.hp. 1999-11-10 Jimmy Guo * gdb.exp (get_compiler_info): pick up compiler.c and compiler.cc from $srcdir/lib/. * lib/compiler.c, lib/compiler.cc: New files, moved from gdb.base/ and gdb.c++/. * gdb.c++/derivation.exp: remove redundant get compiler info code. * gdb.base/commands.exp: add '$gdb_prompt $' anchor to 'continue with watch' test point. 1999-11-08 Jim Blandy Merged from p2linux-990323-branch: * lib/gdb.exp (gdb_continue_to_breakpoint): New function. Mon Nov 8 23:07:09 1999 Andrew Cagney * gdb.base/remote.exp: Test ``set remote memory-write-packet-sized {limit,fixed}''. Test ``set download-write-size''. Sun Nov 7 17:37:01 1999 Andrew Cagney * gdb.base/funcargs.exp: Rewrite stack traceback checks using gdb_expect_list. Fri Nov 5 18:40:52 1999 Andrew Cagney * lib/gdb.exp (gdb_expect_list): Return a success/fail indication. 1999-11-03 Mark Salter * gdb.base/break.exp: Fix "stub continue" pattern. 1999-11-03 Jim Blandy * gdb.base/shlib-call.exp ("next to shr1"): Fix test name. 1999-11-02 Jim Blandy * gdb.base/display.exp ("finish"): Add timeout clause. * gdb.base/condbreak.exp ("run until breakpoint at marker1"): Add plain prompt clause, so this doesn't have to time out in order to fail. * gdb.base/condbreak.exp, gdb.base/ena-dis-br.exp: XFAIL if the breakpoint hit messages include an address. * gdb.base/display.exp: Don't forget to escape parens in regular expressions. Unix regexp notatation sucks. 1999-11-02 Elena Zannoni * gdb.base/annota1.exp: Test for annotate-signalled: change output order for 'signalled' message. 1999-11-01 Stan Shebs From Jimmy Guo : * gdb.base/annota1.exp: Add tests for annotate ignore count change. * gdb.base/annota1.c: Add code for tests to work with. 1999-10-26 Frank Ch. Eigler * gdb.base/remote.exp: New test for remote downloading settings. * gdb.base/remote.c: New file with large .data. 1999-10-18 Jim Blandy * gdb.threads/linux-dp.c, gdb.threads/linux-dp.exp: New test suite for LinuxThreads support, merged from the Code Fusion branch. Mon Oct 11 13:57:21 1999 Andrew Cagney * lib/gdb.exp (gdb_run_cmd): Break complicated gdb_expect containing exp_continue into a while within an expect. Don't attempt a start more than three times. Check return value from gdb_load. Wed Oct 6 12:05:58 1999 Andrew Cagney * gdb.base/watchpoint.exp: Match fail ``finish from marker1'' with a pass case. 1999-10-01 Kevin Buettner * gdb.base/break.c (main): Added a statement that we can step off of. * gdb.base/break.exp: Added tests for setting a breakpoint at an offset and stepping onto a breakpoint. 1999-10-01 Fred Fish * gdb.base/help.exp (help add-symbol-file): Update to match current gdb output. 1999-09-18 Jim Blandy * gdb.base/break.exp: Code locations are in hex, don't forget! (For HP-UX.) 1999-09-17 Stan Shebs * condbreak.exp: Use break.c as test program. * condbreak.c: Remove, redundant with break.c. 1999-09-15 Stan Shebs * config/monitor.exp (gdb_target_monitor): Disable X- and Z-packets if the target needs it. 1999-09-13 James Ingham * gdb.c++/overload.exp: Added tests for listing overloaded functions with function pointers in the arg, explicitly calling out the version you want. 1999-09-09 Stan Shebs * long_long.exp: Add variations of test cases that work for targets with 16-bit ints and 32-bit doubles. 1999-09-08 Stan Shebs * break.c (main): Compare a possibly-uninitialized argc with an unlikely value that fits in 16 bits. 1999-09-07 Stan Shebs * gdb.base/restore.c, gdb.base/restore.exp: Use 0x7eeb instead of 0xfeeb, don't want negative numbers if ints are 16 bits. * lib/gdb.exp (skip_cplus_tests): New proc. * gdb.c++/ambiguous.exp, gdb.c++/annota2.exp, gdb.c++/anon-union.exp, gdb.c++/classes.exp, gdb.c++/cplusfuncs.exp, gdb.c++/ctti.exp, gdb.c++/demangle.exp, gdb.c++/derivation.exp, gdb.c++/inherit.exp, gdb.c++/local.exp, gdb.c++/member-ptr.exp, gdb.c++/method.exp, gdb.c++/misc.exp, gdb.c++/overload.exp, gdb.c++/ovldbreak.exp, gdb.c++/ref-types.exp, gdb.c++/templates.exp, gdb.c++/userdef.exp, gdb.c++/virtfunc.exp: Use it to skip over C++ tests. * gdb.c++/cplusfuncs.exp: Use get_compiler_info consistently. Fri Sep 3 15:37:12 1999 Kevin Buettner * gdb.base/corefile.exp (up): Allow a parameter to appear in the frame that we're going up to. From Jim Blandy : * gdb.base/default.exp (info float): Expect some output now. * gdb.base/callfuncs.exp (do_function_calls): We no longer expect returning floating-point values to fail on the x86. * gdb.base/callfwmall.exp (do_function_calls): Same. * gdb.base/list.exp (test_listsize): Correct expectations for listing line 1 with listsize 2. Also, listing a single line works now, as does listing three lines. [Kevin's note: There were a number of other cases fixed too where the expectations differed...] 1999-09-02 Stan Shebs * gdb.base/selftest.exp: Add case for when version prints as constant string instead of char pointer. 1999-08-25 Stan Shebs * gdb.base/ending-run.exp: Add Solaris case for what happens when stepping out of main. * gdb.c++/derivation.exp: XFAIL inf fn calls for all configs, if G++ used. * gdb.c++/local.exp: Expect ptype NestedInnerLocal to succeed always, expect ptype InnerLocal::NestedInnerLocal to fail always. * gdb.c++/ovldbreak.exp: Update match string in test that includes a warning of multiple breakpoints. 1999-08-24 Stan Shebs * gdb.base/display.exp: Improve precision of step-after-finish added yesterday. * gdb.base/signals.exp: Add extra wildcard to "handle all print" test. * gdb.c++/classes.exp: XFAIL HP-compiler-only tests for all configs when using G++, not just hppa*. 1999-08-24 Elena Zannoni * gdb.base/async.c: New file. * gdb.base/async.exp: New file. Tue Aug 24 03:24:53 1999 Jeffrey A Law (law@cygnus.com) * gdb.base/break.exp: Tweak PA specific tests to properly handle PA64. Mon Aug 23 10:25:20 1999 Jeffrey A Law (law@cygnus.com) * gdb.base/display.exp: "finish" can leave us mid-line on many targets, deal with it. Add a small constant to main, instead of 1000 since main+1000 may not be a valid address in the target. * gdb.base/dollar.exp: Do not run for PA processors in wide mode on hpux11. * gdb.base/attach.exp: Handle another hpux11 error message variant when attaching to a process that does not exist. 1999-08-19 J.T. Conklin * gdb.base/call-ar-exp.exp: Fix pattern matching whitespace characters in 'continue to 1241' test. 1999-08-17 Stan Shebs * gdb.base/call-ar-st.exp: Add a shorter match case for the stop in print_long_arg_list, define and use a whitespace variable in print_small_structs test, add an XFAIL for Solaris. * gdb.base/dbx.exp: XFAIL func commands until somebody is interested enough to fix. 1999-08-13 Keith Seitz * gdb.base/dbx.exp (dbx_gdb_file_cmd): Rename to gdb_file_cmd. (dbx_gdb_load): Remove. Use gdb_load instead, since that proc knows about targets other than the natives. (test_assign): Use "gdb_run_cmd" to "run" the target. Check that we've actually hit the breakpoint at main. When we attempt to assign a value to a local variable, check that the variable is in the current scope, i.e., don't use a test with an empty result. Tue Aug 10 15:25:16 1999 Andrew Cagney * gdb.base/maint.exp: Add test of ``maintenance internal-error'' command. 1999-08-09 Stan Shebs From Jimmy Guo and others at HP: gdb.hp: Move tests into subdirectories gdb.aCC, gdb.base-hp, gdb.compat, gdb.threads-hp. gdb.hp/configure, gdb.hp/configure.in: New files. gdb.hp/Makefile.in: Recurse into new subdirs. gdb.hp/gdb.defects: New directory, tests for HP bug reports. gdb.hp/gdb.objdbg: New directory, tests for debugging info in object files. gdb.hp/tools: New directory, aux tools for HP-specific tests. 1999-08-05 Stan Shebs * gdb.base/display.exp: Help expect by putting a newline in the funky printf, remove a bogus p/a test. 1999-08-05 Elena Zannoni * gdb.base/display.exp: Make sure that when we say 'run', we are connected to the target. This is necessary when running not natively. 1999-08-03 Stan Shebs * gdb.base/step-test.exp: Removed some extraneous messages. * gdb.base/long_long.exp: Don't run memory examination tests on little-endian targets (they will need a different set of results to match). 1999-08-02 Stan Shebs * gdb.c++/virtfunc.exp: Expect to fail the virtual call tests until somebody decides to fix GDB. * gdb.base/long_long.c: Stop compiler complaint by specifying long constant as "ULL". * gdb.base/long_long.exp: Loosen x/c test, add partial result matches for a couple x/2 commands. 1999-07-30 Stan Shebs * gdb.c++/ref-types.cc, gdb.c++/ref-types.exp: Appease doschk by merging in ref-types2 tests. * gdb.c++/ref-types2.cc, gdb.c++/ref-types2.exp: Remove. From Jimmy Guo and others at HP: * gdb.c++/Makefile.in: Add standard actions. (EXECUTABLES): Rename from PROGS, update list. * gdb.c++/ambiguous.cc, gdb.c++/ambiguous.exp: Move to here from gdb.hp. * gdb.c++/anon-union.cc: Don't use anonymous struct, make foo and bar locals. * gdb.c++/anon-union.exp: Fix tests to match. * gdb.c++/classes.exp: Run if HP compiler used, add extra expect matches to handle output variations. * gdb.c++/cplusfuncs.cc: Make operator -> return foo *. * gdb.c++/cplusfuncs.exp: Update to match, allow word "class" in output, add HP alternatives for new and delete prints. * gdb.c++/ctti.exp, gdb.c++/cttiadd.cc, gdb.c++/cttiadd1.cc, gdb.c++/cttiadd2.cc, gdb.c++/cttiadd3.cc: Move here from gdb.hp. * gdb.c++/demangle.exp: Use $style when reporting failure. * gdb.c++/derivation.exp: Add some xfails if GCC-compiled. * gdb.c++/inherit.exp: Run if HP compiler used, add some match alternatives. * gdb.c++/local.exp: Add match alternatives or xfails for HP compilers. * gdb.c++/member-ptr.exp: Add xfails for hppa*-*-*. * gdb.c++/method.exp: Add match alternatives. * gdb.c++/misc.cc: Add bool types. * gdb.c++/misc.exp: Add tests for bool types. * gdb.c++/overload.exp: Add xfails. * gdb.c++/templates.cc: Remove bogus arglist init, init fvpchar. * gdb.c++/templates.exp: Run if HP compiler used, add some xfails, add some more template parameter tests (only for HP currently). * gdb.c++/userdef.exp: Add xfails for hppa*-*-*. * gdb.c++/virtfunc.cc: Add return type and value for main. * gdb.c++/virtfunc.exp: Run if HP compiler used, add some match alternatives. 1999-07-30 Elena Zannoni * gdb.base/display.exp: Fix output of 'p/a &&j' test. 1999-07-29 Jim Blandy * gdb.base/signals.exp: Don't expect getting a backtrace from within a signal handler to fail on Linux. 1999-07-29 Stan Shebs From Jimmy Guo and others at HP: * lib/gdb.exp: Remove some gratuitious semicolons. (delete_breakpoints): Increase timeout. (gdb_expect): Add -notransfer option. (gdb_test): Use -notransfer option. (get_compiler_info): Add f77 case. (get_compiler): New proc, split out from gdb_preprocess, add f77 case. (gdb_preprocess): Call get_compiler. * gdb.base/Makefile.in (EXECUTABLES): Update the list. * gdb.base/attach.exp, gdb.base/display.exp, gdb.base/ending-run.exp, gdb.base/gdbvars.exp, gdb.base/long_long.exp, gdb.base/printcmds.exp, gdb.base/structs.exp, gdb.base/structs2.exp: Remove or fill in third arg to gdb_test. * gdb.base/call-ar-st.exp: Add HP-UX xfail for >10-arg functions. * gdb.base/callfuncs.exp, gdb.base/callfwmall.exp: Remove some HP-UX xfails, add others. * gdb.base/completion.exp: Reflect name change of self-test. * gdb.base/condbreak.exp, gdb.base/corefile.exp, gdb.base/foll-exec.exp, gdb.base/interrupt.exp, gdb.base/ptype.exp, gdb.base/scope.exp, gdb.base/setvar.exp: Note HP failure number. * gdb.base/foll-vfork.exp: Loosen matches slightly, remove useless HP-UX 10.30 references. * gdb.base/maint.exp: Loosen matches. * gdb.base/pointers.c (main): Declare more_code. * gdb.base/pointers.exp: Match on output of a `next'. * gdb.base/structs.c: Add prototypes. * gdb.base/watchpoint.exp: Remove HP-UX 10.30 reference. * gdb.base/whatis.exp: Fail for both HP-UX 10.20 and 11. 1999-07-29 Elena Zannoni * gdb.base/list.exp: Add tests for repeating 'list ' command. 1999-07-27 Elena Zannoni * gdb.c++/annota2.exp: Fix delete breakpoint query testcase. Fix run to main failures. Watchpoint can be hardware watchpoint. * gdb.base/annota1.exp: Clean up some more, in case printf has debug info. Deal with lack of signal hanlder info in stack. From Jim Kingdon : * gdb.base/annota1.exp: If printf has debug info, deal with it. 1999-07-19 Stan Shebs * gdb.base/foll-exec.exp, gdb.base/foll-fork.exp, gdb.base/foll-vfork.exp: Don't run for crosses. Tue Jul 13 23:37:18 1999 Andrew Cagney * gdb.base/configure.in: Check for gdbvars.exp instead of a1-selftest.exp. * gdb.base/configure: Re-generate. 1999-07-12 Stan Shebs * gdb.base/selftest.exp: Rename from a1-selftest.exp, no point in trying to run first and name is too long. * gdb.base/pointers.c, gdb.base/pointers.exp: Add contents of pointers2.c and pointers2.exp, respectively. * gdb.base/pointers2.c, gdb.base/pointers2.exp: Remove, makes doschk happier. 1999-07-08 Stan Shebs * gdb.base/callfwmall.c, gdb.base/callfwmall.exp: Renamed from callfuncs2.c and callfuncs2.exp. * gdb.base/list.exp: Remove mistaken xfails. * gdb.base/list0.h: Add optional prototypes. Wed Jul 7 00:27:35 1999 Andrew Cagney * gdb.base/setvar.exp: Increase the time-out on tests indirectly calling malloc. * nodebug.exp, printcmds.exp, ptype.exp, setvar.exp: Ditto. * ptype.exp: Move test for get_debug_format to before its first use. 1999-07-06 Elena Zannoni * gdb.base/Makefile.in (EXECUTABLES): Remove annota2 executable. * gdb.base/annota2.cc, annota2.exp: Move from here. * gdb.c++/annota2.cc, annota2.exp: To here. * gdb.c++/Makefile.in (PROGS): Add annota2 executable. Tue Jun 29 11:56:06 1999 Andrew Cagney * lib/gdb.exp (gdb_expect_list): Output one message per pattern in a consistent format. 1999-06-25 Stan Shebs From Jimmy Guo and others at HP: * lib/gdb.exp (get_compiler_info): Add detection for assorted HP compilers, also set the globals $true and $false. * gdb.base/annota1.c, bitfields.c, break.c, call-ar-st.c, call-rt-st.c, call-strs.c, callfuncs.c, callfuncs2.c, condbreak.c, coremaker.c, ending-run.c, exprs.c, funcargs.c, interrupt.c, jump.c, langs0.c, langs1.c, langs2.c, list0.c, list1.c, long_long.c, mips_pro.c, nodebug.c, opaque0.c, opaque1.c, printcmds.c, ptype.c, recurse.c, restore.c, return.c, run.c, scope0.c, scope1.c, setshow.c, setvar.c, shmain.c, shr1.c, shr2.c, sigall.c, signals.c, so-impl-ld.c, so-indr-cl.c, solib.c, solib1.c, solib2.c, step-test.c, twice.c, varargs.c, watchpoint.c, whatis.c} Add C++ compatible function definitions and return types, add includes for library functions. * gdb.base/ptype.c (my_false, my_true): Use instead of false/true. * gdb.base/step-test.c (myglob): Rename from glob. * gdb.base/attach.c, attach2.c, average.c, execd-prog.c, foll-exec.c, foll-fork.c, foll-vfork.c, sum.c, vforked-prog.c: New files, move here from gdb.hp. * gdb.base/annota1.exp, break.exp, call-ar-st.exp, call-rt-st.exp, commands.exp, condbreak.exp, define.exp, ena-dis-br.exp, ending-run.exp, jump.exp. list.exp, long_long.exp, so-impl-ld.exp: Adjust line numbers in regexps. * gdb.base/all-bin.exp, eval-skip.exp, exprs.exp, logical.exp, miscexprs.exp, pointers.exp, relational.exp: Use $true and $false instead of 0/1. * gdb.base/attach.exp, dbx.exp, foll-exec.exp, foll-fork.exp, foll-vfork.exp: New files, move here from gdb.hp. * gdb.base/page.exp: New file, test of pagination command. * gdb.base/watchpoint.c (recurser): New function, for watchpoint recursion test. * gdb.base/watchpoint.exp: Add more test cases for watchpoints. * gdb.base/so-impl-ld.exp, gdb.base/so-indr-cl.exp, gdb.base/solib.exp: Fix compiler invocation process. * gdb.base/callfuncs.exp, gdb.base/callfuncs2.exp: Don't xfail for HP-UX 11, turn off overload resolution explicitly. * gdb.base/commands.exp: Set argument list explicitly, add watchpoint test. * gdb.base/completion.exp: Enable if HP-UX, tweak tests to make them work. * gdb.base/constvars.exp, gdb.base/volatile.exp: Escape the expressions properly. * gdb.base/corefile.exp: Loosen the match slightly. * gdb.base/default.exp: Allow "Error accessing memory" message also. * gdb.base/display.exp: Skip over x/0 j if PA64. * gdb.base/funcargs.exp: Add xfails for HP-UX. * gdb.base/interrupt.exp: Ditto. * gdb.base/langs.exp: Add symbolic matches governed by compiler in use. * gdb.base/list.exp: Add xfails for HP-UX. * gdb.base/long_long.exp: Refine some of the numeric matches. * gdb.base/mips_pro.exp: Xfail on HP-UX. * gdb.base/miscexprs.exp: Add PA2.0 case for array size test. * gdb.base/nodebug.exp: Succeed on more varieties of output. * gdb.base/opaque.exp: Remove some HP-UX xfails. * gdb.base/ptype.exp: Succeed on more varieties of output. * gdb.base/scope.exp: Add xfails for HP-UX. * gdb.base/sect-cmd.exp: Add more cases. * gdb.base/setvar.exp: Add xfails for HP-UX. * gdb.base/shlib-call.exp: Loosen some matches slightly. * gdb.base/signals.exp: Match on void symbolically. * gdb.base/step-test.exp: Add case for PA64. * gdb.base/term.exp: Add exit and restart. * gdb.base/twice.exp: Clean up after self. * gdb.base/varargs.exp: Disable overload resolution explicitly. * gdb.base/whatis.exp: Allow more ways to pass tests. * gdb.base/smoke.exp, gdb.base/smoke.c, gdb.base/smoke.cc: Remove, no longer useful. Fri Jun 25 19:27:28 1999 Andrew Cagney * lib/gdb.exp (proc gdb_expect_list): New procedure. Matches a list of patterns. * gdb.base/call-ar-st.exp: Use gdb_expect_list in "print print_double_array(double_array)", "continuing to breakpoint 1018", "print print_double_array(array_d)" and "continuing to 1034" tests. 1999-06-24 Jason Molenda (jsm@bugshack.cygnus.com) * Makefile.in: Add empty html and install-html targets. 1999-06-24 Stan Shebs * config/mt-*: Remove, these haven't been used since 1996. 1999-06-22 Stan Shebs * gdb.base/call-strs.c, gdb.base/ending-run.c, gdb.base/step-test.c: Include stdlib.h and string.h as needed. * gdb.c++/member-ptr.exp: Skip over these tests if using G++. 1999-06-18 Stan Shebs * gdb.c++/overload.exp: XFAIL everything if using G++, add a simpler match case for the ptype of the big class. 1999-06-16 Fernando Nasser * gdb.exp: Fix test for gdb_prompt existence. 1999-06-16 Fernando Nasser * gdb.exp (gdb_test): Add fail after calls to perror. 1999-06-16 Fernando Nasser * gdb.exp (gdb_test): Accept variations of Undefined command messages. 1999-06-16 Fernando Nasser * gdb.exp (gdb_test): Fix anchors on gdb_expect statement. Fri Jun 11 12:56:50 1999 Andrew Cagney * gdb.base/call-strs.c (link_malloc): New function. Ensure that malloc() is linked in. 1999-06-08 Fernando Nasser * gdb.base/ending-run.exp: Make sure we fail and do not timeout at step at end. * gdb.base/annota1.exp: Increase match_max to prevent timeout. 1999-06-08 Jim Blandy * gdb.java/jv-print.exp: New file. (Our first Java test!) Fri Jun 4 10:47:46 1999 Jeffrey A Law (law@cygnus.com) * gdb.base/a1-selftest.exp: Remove bogus hppa xfail. * gdb.base/mips_pro.exp: Likewise. 1999-06-02 Keith Seitz * gdb.c++/templates.cc: Change all "new" operators to throw an exception. * gdb.c++/cplusfuncs.cc: Likewise. * gdb.base/Makefile.in (EXECUTABLES): Add smoke1, annota1, and annota2. Wed Jun 2 17:37:05 1999 Andrew Cagney * gdb.base/condbreak.exp: Use rerun_to_main to start the program. * gdb.base/ending-run.exp: When stepping out of main, accept a step into an arbitrary assembler file. 1999-05-20 Elena Zannoni * gdb.base/annota1.exp: Allow any number of "frames-invalid" and "breakpoint-invalid" to be printed. * gdb.base/annota2.exp: Revise line number for main breakpoint. Allow any number of "frames-invalid" and "breakpoint-invalid" to be printed. * gdb.base/annota2.cc: Initialize a.x to 0. 1999-05-17 Keith Seitz * gdb.base/call-ar-st.exp: Skip "print print_double_array (double_array)" when "skip_float_tests" set. Ditto for "print print_double_array(array_d)", "print print_small_structs", "print print_ten_doubles", and "step into print_long_arg_list". Don't assume we can step into "print_long_arg_list": we could step into memcpy. * gdb.base/call-rt-st.exp: Don't run float-related tests when "skip_float_tests" is set: "print print_one_double(*d1)" and "print print_two_floats(*f3)". * gdb.base/funcargs.exp: Don't run "float_and_integral_args" when "skip_float_tests" is set. * gdb.base/varargs.exp: Skip "print find_max_double(5,1.0,17.0,2.0,3.0,4.0)" when "skip_float_tests" set. 1999-05-06 Keith Seitz * gdb.base/annota2.cc: Include stdio.h. Wed May 5 17:44:31 1999 Stan Shebs * gdb.base/crossload.exp: Remove, this has been disabled ever since BFD stopped including all targets, and cross-GDB gets plenty of testing anyway. * gdb.base/i486-elf.u, gdb.base/m68k-aout.u, gdb.base/m68k-elf.u, gdb.base/sparc-aout.u, gdb.base/i860-elf.u, gdb.base/m68k-aout2.u, gdb.base/mips-ecoff.u, gdb.base/sparc-elf.u: Remove. * gdb.base/README: Remove, was doc for this. * gdb.base/Makefile.in (CROSS_EXECUTABLES): Remove, no longer needed. 1999-05-04 Elena Zannoni * gdb.base/call-ar-st.exp: Fix one regular expression in test output. * gdb.base/annota1.exp: New file. Annotation level 2 tests. * gdb.base/annota2.exp: New file. More annotation tests. * gdb.base/annota1.c: New file. Source file for annota1.exp. * gdb.base/annota2.cc: New file. Source file for annota2.exp. 1999-04-23 Angela Marie Thomas * config/cfdbug.exp: New file. 1999-04-20 Jim Blandy * gdb.c++/demangle.exp (test_gnu_style_demangling): Add tests for Marcus Daniel's and Dale Hawkins's demangler crashes. * gdb.c++/demangle.exp (test_gnu_style_demangling, test_lucid_style_demangling, test_arm_style_demangling, test_hp_style_demangling): Try Tom Tromey's core-dumping identifier under each demangling style. 1999-04-07 Jim Blandy * gdb.c++/demangle.exp: Include the current demangling style in all test names. (current_demangling_style): New global variable. (set_demangling_style, test_demangling_core, test_demangling, test_demangling_exact): New functions. (test_gnu_style_demangling, test_lucid_style_demangling, test_arm_style_demangling, test_hp_style_demangling): Use those, instead of calling gdb_test and gdb_test_exact directly. (catch_demangling_errors): New function, which reports errors signalled by the demangling test functions in an orderly way. (do_tests): Use catch_demangling_errors. 1999-04-06 Jim Blandy * gdb.base/signals.exp (test_handle_all_print): Use () for grouping in expressions, not {}. * gdb.base/smoke.exp: Test value of x, not y. The latter isn't initialized yet. 1999-04-01 Stan Shebs * gdb.c++/derivation.exp: Pass ptype tests if synthesized methods are listed. 1999-03-26 Stan Shebs * gdb.stabs/weird.exp: Test for CC being defined before looking at its value. 1999-03-25 Stan Shebs * gdb.base/call-ar-st.exp: Remove stray '#'. * gdb.base/miscexprs.exp: Allow "short" and "long" as well as "short int" and "long int". * gdb.c++/overload.cc: Cast the string added in the previous change, to mollify finicky HP compiler. * gdb.hp/reg-test.exp (testfile): Fix file name. * gdb.stabs/weird.exp: Don't try to run if HP compiler in use. * gdb.c++/misc.cc (main): Initialize obj_with_enum. * gdb.c++/classes.exp: Fix test of obj_with_enum values, allow alternate form of enum ptype. 1999-03-23 Stan Shebs * lib/gdb.exp (skip_hp_tests): Remove gcc_used argument. * gdb.hp/*.exp: Change all to run compiler probe only after passing skip_hp_tests, so as not to waste time on guaranteed failure. * gdb.c++/overload.cc: Pass string instead of char addr, always init ccpfoo. * gdb.c++/templates.cc: Fix syntax error. Tue Mar 23 14:56:36 1999 Elena Zannoni * gdb.base/commands.exp: Add test for correct position of '>' when issuing the 'commands' command after a 'while' or 'if' command. 1999-03-18 James Ingham * gdb.c++/ovldbreak.exp: Use gdb_continue_to_end * gdb.c++/method.exp: It was testing an uninitialized int on the stack and assuming it was positive. * gdb.base/watchpoint.exp: Use gdb_continue_to_end. * gdb.base/step-test.exp: Catch a case where finish is broken and keep it from killing the rest of the tests. Use gdb_continue_to_end. * gdb.base/sigall.exp: use gdb_continue_to_end. * gdb.base/ena-dis-br.exp: use gdb_continue_to_end. * gdb.base/display.exp: use runto_main, not run. * gdb.base/default.exp: Check for the current error message in the r abbreviation test. Add strongarm to the targets that know info float. * gdb.base/condbreak.exp: Use the gdb_run command rather than just run which doesn't work with monitors. * gdb.base/call-ar-st.exp: fixed bogus regexp in continuing to 1034 test. * gdb.base/break.exp: use the gdb_continue_to_end proc. * lib/gdb.exp: I had added gdb_continue_to_end used to run to the end of a program. Traps the case (in Cygmon) when the program never really exits. Same as Mark's continue_to_exit, but I had put it in a lot more places, so I used my name. Sorry Mark... * config/monitor.exp (gdb_target_monitor): added another target_info parameter: remotebinarydownload. This will set the remotebinarydownload flag if this is causing some boards trouble. 1999-03-18 Mark Salter * lib/gdb.exp (continue_to_exit): New function. * gdb.base/ena-dis-br.exp: Clean up for remote targets. * gdb.base/ending-run.exp: Ditto. * gdb.base/step-test.exp: Ditto. 1999-03-16 Stan Shebs * gdb.base/miscexprs.c: Clean up file, clear cbig.c[0] explicitly (suggested by Art Haas ). 1999-03-16 Jim Blandy * gdb.base/signals.exp: Filter out *-*-linux* before matching *-*-gnu*. Fri Mar 12 18:06:21 1999 Stan Shebs * gdb.c++/ref-types.exp, ref-types2.exp: Allow alternate descriptions of types (short unsigned int vs unsigned short, etc). 1999-03-12 Jim Blandy * gdb.base/call-strs.exp: Don't assume that `step' will step over a call to strlen; sometimes we do have sources. 1999-03-08 Jim Blandy * gdb.base/call-ar-st.c (main): Terminate char_array with a null character, so GDB won't print garbage after its end. * gdb.base/call-ar-st.exp: Don't step into sum_array_print; set a breakpoint there instead. Sometimes GCC emits memcpy to handle the large structures being passed by value, so we step into that instead of sum_array_print, which obscures what we're really testing. * gdb.base/step-test.exp: However, we do want a test that notices the bizarre steps into memcpy, so do that here. Add check for stepping into function calls that pass large structures by value. ("Is that a noun clause, or are you just happy to see me?") Remove all references to specific line numbers. * gdb.base/step-test.c (struct rhomboidal, large_struct_by_value): New type and function. (main): Call large_struct_by_value, passing it a large struct by value. * lib/gdb.exp (gdb_get_line_number): New function. * gdb.base/step-test.exp: Rewrite `stepi' and `nexti' tests to be more portable. 1999-03-08 Jim Blandy * lib/gdb.exp: Doc fixes. 1999-03-05 Nick Clifton * gdb.base/a2-run.exp: Add expected fails for strongarm-coff. 1999-03-04 Jim Blandy * gdb.base/display.exp: Don't exercise the "detach" and "kill" commands. They're not germane to this test, and they don't work that way on remote targets. 1999-03-01 James Ingham * Changelog entries merged over from gdb development branch. Tue Jan 5 12:33:47 1999 Keith Seitz * lib/gdb.exp (gdbtk_analyze_results): Generic function for outputting results of test run. 1998-12-07 Martin M. Hunt * lib/gdb.exp (gdbtk_start): Fix path for itcl library. 1999-02-25 Felix Lee * lib/gdb.exp (debug_format): initialize 1999-02-25 Jason Molenda (jsm@bugshack.cygnus.com) * gdb.base/call-ar-st.c: Include string.h, not strings.h. * gdb.base/call-rt-st.c: Ditto. 1999-02-13 Jim Blandy * gdb.threads/pthreads.exp (horiz): New variable. (test_startup): Fix regexps that capture thread numbers. 1999-02-10 Jason Molenda (jsm@bugshack.cygnus.com) * gdb.base/smoke.exp: Disambiguate two test case names (both called ``print''). Fri Feb 5 12:42:56 1999 Stan Shebs * gdb.base/volatile.exp: Use gdb_test, add xfails for GCC compilation. 1999-02-04 Jason Molenda (jsm@bugshack.cygnus.com) * gdb.base/miscexprs.exp: Change patterns to match GDB's actual output formatting. * gdb.base/smoke.exp: GDB removes leading 0's. * gdb.base/volatile.exp: Don't check type of remuneration; that variable is no longer defined in constvars.c. * gdb.base/step-test.c (main): Exit with explicit exit code. * gdb.base/step-test.exp: Remove two nexti checks--they are not portable. 1999-02-04 Jason Molenda (jsm@bugshack.cygnus.com) * gdb.base/help.exp ("help delete display"): Fix test to match gdb's output. * gdb.base/long_long.c (known_types): Initialize values to zero. * gdb.base/long_long.exp: Step one more line so 'dec' is initialized in "get to known place". GDB removes leading zeros. Explicitly ask for hex formatting. Use unique test case names. Tue Feb 2 10:16:08 1999 Elena Zannoni * lib/gdb.exp (gdb_preprocess): Remove 'puts' statement. * gdb.c++/method.exp: Add missing close brace. 1999-01-30 Jim Blandy * gdb.base/maint.exp: Use 'set height 0' to disable page prompting, not 'set height 400'. Fix a bunch of timeouts. * gdb.base/maint.exp ("maint print objfiles"): Break this up into four separate tests, so expect doesn't take forever to match a ton of text against a regexp with lots of .* forms. ("maint print psymbols", "maint print symbols"): Make some of these greps more selective, so that expect doesn't try to wade through huge piles of output and time out. * gdb.base/maint.exp ("maint print msymbols"): Fix pattern. * gdb.base/maint.exp ("maint info breakpoints"): Split into two tests: one which doesn't expect shlib events to be reported, and another which does, but is XFAIL for all platforms other than HP/UX. * gdb.base/break.exp: Teach the test suite that the `catch fork', `catch vfork', and `catch exec' commands produce error messages on platforms that don't provide these features. Mon Jan 25 18:35:56 1999 Stan Shebs * gdb.hp/gen-so-thresh.c, so-thresh.sh, so-thresh.exp, so-thresh.linkopts, so-thresh.mk: Move to gdb.hp from gdb.base (shortening names from solib_threshold.exp etc), won't run on anything but HP-UX for the foreseeable future. * gdb.hp/Makefile.in, gdb.base/Makefile.in (clean): Adjust to reflect move. Thu Jan 21 15:46:49 1999 Stan Shebs * gdb.base/Makefile.in, gdb.c++/Makefile.in, gdb.trace/Makefile.in (clean): Remove all test executables. Tue Jan 19 17:20:09 1999 David Taylor * gdb.base/shlib-call.exp: add test cases to verify that gdb successfully re-sets breakpoints in shared libraries. * gdb.base/shmain.c (main): return 0, don't fall off the end. Fri Jan 15 14:04:57 1999 Elena Zannoni * gdb.hp/xdb3.exp: do not execute unless on hppa-hpux platform and compiled w/o GCC. * gdb.hp/watch-cmd.exp: ditto. * gdb.hp/watch-hp.exp: ditto. * gdb.hp/xdb1.exp: ditto. * gdb.hp/xdb2.exp: ditto. * gdb.hp/dbx.exp: ditto. Thu Jan 14 18:36:48 1999 Stan Shebs * constvars.c: Remove C++-isms. * constvars.exp: Use gdb_test everywhere, add xfails if compiled with GCC. Mon Jan 11 10:08:03 1999 David Taylor The following changes are part of the HP merge. * gdb.base/break.exp: new tests to verify that catchpoints for fork, vfork, and exec don't trigger inappropriately. * gdb.base/opaque.exp: compile one file at a time, then link. * gdb.base/signals.exp: be more restrictive about which hppa systems receive a setup_xfail. new tests. * gdb.base/solib_threshold.build: new file. * gdb.base/solib_threshold.exp: new file. * gdb.base/solib_threshold.link_opts: new file. * gdb.base/solib_threshold.mk: new file. * gdb.base/gen_solib_threshold.c: new file. * gdb.c++/classes.exp: if on HPUX and not using gcc, skip the tests. New tests for enums inside classes. * gdb.c++/compiler.cc: indicate support of template debugging. * gdb.c++/demangle.exp: run hp style demangling tests. * gdb.c++/inherit.exp: if on HPUX and not using gcc, skip the tests. * gdb.c++/misc.cc: changes to support new tests. * gdb.c++/templates.cc: changes to support HP's compiler; changes to support new tests. * gdb.c++/virtfunc.exp: if we are on HPUX and we are not using gcc, then skip these tests. Sun Jan 10 23:44:11 1999 David Taylor The following files are part of the HP merge; some had longer names at HP, but have been renamed to be no more than 14 characters in length. * gdb.hp/ambiguous.cc: new file. * gdb.hp/ambiguous.exp: new file. * gdb.hp/attach.exp: new file. * gdb.hp/attach2.exp: new file. * gdb.hp/classes-hp.exp: new file. * gdb.hp/ctti.exp: new file. * gdb.hp/ctti-add.cc: new file. * gdb.hp/ctti-add1.cc: new file. * gdb.hp/ctti-add2.cc: new file. * gdb.hp/ctti-add3.cc: new file. * gdb.hp/dbx.exp: new file. * gdb.hp/exception.cc: new file. * gdb.hp/exception.exp: new file. * gdb.hp/foll-exec.c: new file. * gdb.hp/foll-exec.exp: new file. * gdb.hp/foll-fork.c: new file. * gdb.hp/foll-fork.exp: new file. * gdb.hp/foll-vfork.c: new file. * gdb.hp/foll-vfork.exp: new file. * gdb.hp/inherit-hp.exp: new file. * gdb.hp/more-steps.exp: new file. * gdb.hp/namespace.cc: new file. * gdb.hp/namespace.exp: new file. * gdb.hp/optimize.exp: new file. * gdb.hp/pxdb.c: new file. * gdb.hp/pxdb.exp: new file. * gdb.hp/quicksort.exp: new file. * gdb.hp/reg-test.exp: new file. * gdb.hp/reg-test.s: new file. * gdb.hp/sized-enum.c: new file. * gdb.hp/sized-enum.exp: new file. * gdb.hp/start-stop.exp: new file. * gdb.hp/templ-hp.cc: new file. * gdb.hp/templ-hp.exp: new file. * gdb.hp/thr-lib.c: new file. * gdb.hp/thr-lib.exp: new file. * gdb.hp/thr-lib.h: new file. * gdb.hp/thr-liblib.c: new file. * gdb.hp/virtfun-hp.c: new file. * gdb.hp/virtfun-hp.exp: new file. * gdb.hp/watch-cmd.exp: new file. * gdb.hp/watch-hp.exp: new file. * gdb.hp/xdb1.exp: new file. * gdb.hp/xdb2.exp: new file. * gdb.hp/xdb3.exp: new file. Wed Jan 6 18:41:15 1999 David Taylor The following files are part of the HP merge; some had longer names at HP, but have been renamed to be no more than 14 characters in length. * gdb.base/ss.h: new file. * gdb.base/call-ar-st.c: new file. * gdb.base/call-ar-st.exp: new file. * gdb.base/call-rt-st.c: new file. * gdb.base/call-rt-st-exp: new file. * gdb.base/call-strs.exp: new file. * gdb.base/ena-dis-br.exp: new file. * gdb.base/environ.exp: new file. * gdb.base/long_long.exp: new file. * gdb.base/sect-cmd.exp: new file. * gdb.base/shlib-cl2.exp: new file. * gdb.base/smoke.exp: new file. * gdb.base/so-impl-ld.c: new file. * gdb.base/so-impl-ld.exp: new file. * gdb.base/so-indr-cl.c: new file. * gdb.base/so-indr-cl.exp: new file. * gdb.base/varargs.exp: new file. * gdb.base/volatile.exp: new file. * gdb.base/whatis-exp.exp: new file. * gdb.base/display.exp: new file. * gdb.c++/derivation.exp: new file. * gdb.c++/local.exp: new file. * gdb.c++/member-ptr.exp: new file. * gdb.c++/overload.exp: new file. * gdb.c++/ovldbreak.exp: new file. * gdb.c++/ref-types.exp: new file. * gdb.c++/ref-types2.exp: new file. * gdb.c++/userdef.exp: new file. Wed Jan 6 13:50:57 1999 Stan Shebs * gdb.base/default.exp: Reflect wording change in remote.c. Tue Jan 5 19:14:51 1999 Michael Snyder * gdb.base/help.exp: Update to reflect current text. Tue Jan 5 13:05:32 1999 David Taylor * gdb.c++/anon-union.cc: make foo and bar global, otherwise they're stack variables and contain garbage. * gdb.c++/anon-union.exp: new file. The following changes were made by David Taylor , Elena Zannoni , and Edith Epstein as part of a project to merge in changes by HP. * gdb.base/bitops.exp: new file. * gdb.base/default.exp: change expected messages for catch and info catch tests to reflect HP merge changes. * gdb.base/enable-disable-break.exp * gdb.base/ending-run.c: new file. * gdb.base/long_long.c: new file. * gdb.base/maint.exp: new file. * gdb.base/pointers2.exp: new file. * gdb.base/shlib-call2.exp: new file. * gdb.base/solib.exp: new file. * gdb.base/step-test.c: new file. * gdb.c++/anon-union.cc: new file. * gdb.c++/local.cc: new file. * gdb.c++/member-pointer.cc: new file. * gdb.c++/method.cc: new file. * gdb.c++/ref-types.cc: new file. * gdb.c++/ref-types2.cc: new file. * gdb.c++/userdef.cc: new file. * gdb.base/scope.exp: compile one file at a time, then link. * gdb.base/langs.exp: ditto. * gdb.base/list.exp: ditto. Mon Jan 4 10:06:43 1999 David Taylor The following changes were made by David Taylor , Elena Zannoni , and Edith Epstein as part of a project to merge in changes by HP. * gdb.c++/inherit.exp: if on hppa*-*-hpux* and not using gcc, skip tests. When compiling pass c++ flag to gdb_compile. * gdb.c++/ * lib/gdb.exp (get_compiler_info): new, optional argument -- args; test for on hppa*-*-hpux*; use args to see if c++ was specified. (skip_hp_tests): new function. (gdb_preprocess): new function. * configure.in (hpdir): decide whether to configure gdb.hp. * configure: regenerated. * gdb.base/Makefile.in (MISCELLANEOUS): new macros -- extra things to delete on clean. (EXECUTABLES): update to reflect new additions. * gdb.base/commands.exp: update message expected. * gdb.base/default.exp: add copyright notice. * gdb.base/funcargs.exp (timeout): if hpux, increase timeout. * gdb.base/help.exp: update messages to reflect current text. * gdb.base/recurse.exp: add hpppa*-*-bsd* to 'list' of enabled targets for recurse tests. * gdb.base/watchpoint.exp: if on hpux and not gcc compiled, then skip this file. * gdb.c++/Makefile.in (PROGS): update to reflect new executables. * gdb.c++/cplusfuncs.exp: tell gdb_compile that it's a c++ compilation. * gdb.c++/misc.exp: ditto. * gdb.c++/templates.exp: if we're on hpux and it's not gcc, don't run the tests. tell gdb_compile that it's a c++ compilation. * gdb.threads/pthreads.exp: fix typo in message. * gdb.base/all-bin.exp: new file. * gdb.base/arithmet.exp: new file. * gdb.base/assign.exp: new file. * gdb.base/completion.exp: new file. * gdb.base/cond-expr.exp: new file. * gdb.base/condbreak.exp: new file. * gdb.base/define.exp: new file. * gdb.base/dollar.exp: new file. * gdb.base/environment.exp: new file. * gdb.base/eval-skip.exp: new file. * gdb.base/jump.exp: new file. * gdb.base/logical.exp: new file. * gdb.base/pointers.exp: new file. * gdb.base/relational.exp: new file. * gdb.base/section_command.exp: new file. * gdb.base/whatis-expr.exp: new file. * gdb.base/all-types.c: new file. * gdb.base/call-array-struct.c: new file. * gdb.base/call-return-struct.c: new file. * gdb.base/call-strings.c: new file. * gdb.base/callfuncs2.c: new file. * gdb.base/condbreak.c: new file. * gdb.base/constvars.c: new file. * gdb.base/display.c: new file. * gdb.base/int-type.c: new file. * gdb.base/jump.c: new file. * gdb.base/miscexprs.c: new file. * gdb.base/pointers.c: new file. * gdb.base/pointers2.c: new file. * gdb.base/shmain.c: new file. * gdb.base/shr1.c: new file. * gdb.base/shr2.c: new file. * gdb.base/solib.c: new file. * gdb.base/solib1.c: new file. * gdb.base/solib2.c: new file. * gdb.base/varargs.c: new file. * gdb.c++/derivation.cc: new file. * gdb.c++/overload.cc: new file. * gdb.c++/ovldbreak.cc: new file. * gdb.hp/attach.c: new file. * gdb.hp/attach2.c: new file. * gdb.hp/average.c: new file. * gdb.hp/compiler.c: new file. * gdb.hp/compiler.cc: new file. * gdb.hp/execd-program.c: new file. * gdb.hp/follow-exec.c: new file. * gdb.hp/follow-fork.c: new file. * gdb.hp/follow-vfork-and-exec.c: new file. * gdb.hp/misc-hp.cc: new file. * gdb.hp/more-steps.c: new file. * gdb.hp/optimize.c: new file. * gdb.hp/quicksort.c: new file. * gdb.hp/run-hp.c: new file. * gdb.hp/start-stop.c: new file. * gdb.hp/sum.c: new file. * gdb.hp/templates-hp.cc: new file. * gdb.hp/thread-local-in-lib.c: new file. * gdb.hp/thread-local-in-lib.h: new file. * gdb.hp/thread-local-in-lib.lib.c: new file. * gdb.hp/vforked-program.c: new file. * gdb.hp/virtfunc-hp.cc: new file. * gdb.hp/watchpoint-hp.c: new file. * gdb.hp/xdb.c: new file. * gdb.hp/xdb0.c: new file. * gdb.hp/xdb0.h: new file. * gdb.hp/xdb1.c: new file. Mon Dec 21 14:08:38 1998 David Taylor The following change was made by Edith Epstein as part of a project to merge in changes originally made by HP; HP did not create ChangeLog entries. * gdb.c++/demangle.exp: changed the expected output for some ARM-style mangling -- removed second reference to datatype. For example, maint demangle __dt__11T1__pt__2_cFv T1::~T1(void) becomes, maint demangle __dt__11T1__pt__2_cFv T1::~T1(void) (test_hp_style_demangling): new hp specific demangling test cases. Mon Dec 14 15:07:03 1998 Jeffrey A Law (law@cygnus.com) * gdb.trace/actions.exp: Ignore compiler warnings compiling actions.c * gdb.trace/backtrace.exp: Likewise. * gdb.trace/circ.exp: Likewise. * gdb.trace/collection.exp: Likewise. * gdb.trace/deltrace.exp: Likewise. * gdb.trace/infotrace.exp: Likewise. * gdb.trace/limits.exp: Likewise. * gdb.trace/packetlen.exp: Likewise. * gdb.trace/passc-dyn.exp: Likewise. * gdb.trace/passcount.exp: Likewise. * gdb.trace/report.exp: Likewise. * gdb.trace/save-trace.exp: Likewise. * gdb.trace/tfind.exp: Likewise. * gdb.trace/tracecmd.exp: Likewise. * gdb.trace/while-dyn.exp: Likewise. * gdb.trace/while-stepping.exp: Likewise. 1998-12-07 Jim Blandy * gdb.base/restore.exp, gdb.base/restore.c: New tests. Wed Dec 2 20:03:53 1998 Stan Shebs From Brendan Kehoe: * gdb.c++/cplusfuncs.cc, misc.cc, virtfunc.cc: Add now-required int return types. Sat Oct 24 18:04:22 1998 Felix Lee * config/slite.exp (gdb_load): use gdb_file_cmd, so we can do remote dos host testing right. Mon Oct 19 01:31:59 1998 Felix Lee * gdb.base/corefile.exp: remove some xfails. Thu Oct 15 10:04:38 1998 Andrew Cagney * gdb.base/reread.exp: Sleep 1 - ensures that the two executables have different timestamps. Thu Oct 1 20:56:14 1998 Andrew Cagney * lib/gdb.exp, gdb.base/default.exp, config/monitor.exp, gdb.base/default.exp: Replace "exec" with "executable". Tue Sep 29 15:06:29 1998 Andrew Cagney * gdb.base/default.exp: Change else if to elseif from previous delta. Mon Sep 28 13:21:43 1998 Nick Clifton * gdb.base/default.exp: Add brace missing from previous delta. Mon Sep 21 14:39:27 1998 Nick Clifton * gdb.base/default.exp: Support test for info float for all varieties of arm toolchain. Fri Sep 18 14:07:44 1998 Michael Snyder * gdb.trace/*.exp: remove "remote_download" command. Wed Sep 16 11:38:21 1998 Michael Snyder * gdb.trace/*.exp: remove -gdwarf from compile. Wed Sep 16 01:23:11 1998 Felix Lee * gdb.trace/configure.in(AC_INIT): typo * gdb.trace/configure: regenerated Mon Sep 14 20:00:04 1998 Michael Snyder * config/m68k-emc.exp: New file. * lib/ * gdb.c++/classes.exp: Change all regular expressions to match arbitrary combinations of newline/carriage-return, so that they will work equally well on Unix and Windows. * gdb.c++/inherit.exp: ditto. * gdb.c++/virtfunc.exp: ditto. 1998-08-11 Dawn Perchik * gdb.base/setshow.exp: Fix error introduced by call to runto_main. Fri Jul 24 15:51:34 1998 Jeffrey A Law (law@cygnus.com) * gdb.disasm/am33.s: Add tests for autoincrement instructions. * gdb.disasm/am33.exp: Run time. Update tests which use r8-r15 to use a0-a3/d0-d3 as needed. Thu Jul 16 18:20:46 1998 Jeffrey A Law (law@cygnus.com) * gdb.disasm/am33.s: Add 4 operand mul and mulu tests. * gdb.disasm/am33.exp: Corresponding changes. 1998-07-11 Felix Lee * gdb.base/callfuncs.exp: add cmp10 test. * gdb.base/callfuncs.c (cmp10): new function. Thurs Jul 9 11:08:31 1998 Dawn Perchik * gdb.base/commands.exp: Break up infrun_breakpoint_command_test into two parts to get around a synchronization problem in expect. Fri Jun 26 14:27:13 1998 Keith Seitz * lib/gdb.exp (gdbtk_start): Add startup for gdbtk. * configure.in: Add options for gdbtk testsuite. * configure: Regenerate. * gdb.gdbtk: New directory to hold gdbtk tests. Fri Jun 26 14:52:47 1998 Peter Schauer * gdb.fortran/types.exp: Escape brackets in expect patterns for test_float_literal_types_accepted tests. * gdb.base/scope.exp: Remove extraneous newline in filelocal_bss before run test. Fri Jun 26 11:12:17 1998 Jeffrey A Law (law@cygnus.com) * am33.exp: Just compile, do not link the testcase. * am33.s: Add ".am33" pseudoop to force am33 mode. 1998-06-25 Felix Lee * gdb.base/setshow.exp: make sure $pc is sane. * gdb.stabs/weird.exp: split expect patterns properly. Wed Jun 24 13:03:15 1998 Jeffrey A Law (law@cygnus.com) * gdb.disasm/am33.s: New disassembler testfile for the am33. * gdb.disasm/am33.exp: Run it. Tue Jun 23 11:45:01 1998 Michael Snyder * gdb.base/funcargs.exp: simplify expect strings to ease pattern match processing (and eliminate spurious timeouts when running). Fri Jun 12 17:28:22 1998 Michael Snyder * gdb.base/signals.exp (test_handle_all_print): put back Mach exception test, but conditionalize it on target [mach | gnu]. Wed Jun 10 10:40:03 1998 Michael Snyder * gdb.base/overlays.exp: fixup compile line for linker script. Thu Jun 4 21:54:15 1998 Felix Lee * gdb.fortran/types.exp: don't guess at float size. Thu May 21 02:28:37 1998 Felix Lee * gdb.base/exprs.exp: delete test that depends on int size. Sun May 17 17:10:22 1998 Bob Manson * config/sim.exp: Removed checks for target triplets. (gdb_target_sim): Use gdb,target_sim_options. Sat May 16 23:43:35 1998 Mark Alexander * gdb.base/reread.exp: New file. * gdb.base/reread1.c: New file. * gdb.base/reread2.c: New file. Sat May 16 23:22:09 1998 Mark Alexander * config/sim.exp: Use 'target sim -sparclite' when running SPARClite programs. Sat May 16 18:48:08 1998 Doug Evans * gdb.base/structs2.exp: New file. * gdb.base/structs2.c: New file. Wed May 13 13:36:14 1998 Doug Evans * gdb.asm/common.inc: New file. * gdb.asm/d10v.inc: New file. * asm-source.exp: Pass -I's to gas to find .inc files. Update line numbers in expected output. * asmsrc1.s: Rewrite. * asmsrc2.s: Rewrite. * configure.in: Create arch.inc symlink. * configure: Regenerate. * Makefile.in (distclean): Delete arch.inc. Wed May 6 10:30:54 1998 John Metzler * callfuncs.c (t_enum_value1) : Cleanup return value warnings (t_enum_value2): ditto (t_enum_value3): ditto (main): ditto Fri May 1 09:33:37 1998 Peter Schauer * gdb.base/break.exp: Remove xfail for `deleting all breakpoints when none' unexpected prompt case, fixed by breakpoint.c:delete_command change. Use gdb_test instead of send_gdb/gdb_expect sequences. Thu Apr 23 12:56:19 1998 Jason Molenda (crash@bugshack.cygnus.com) * gdb.c++/virtfunc.cc: Declare extern "C" printf to return int, not void. Thu Apr 16 10:52:34 1998 John Metzler * gdb.base/branches.c: Code with lots of loops and subroutines. Used to test gdbs ability to single step through PC changes, especially to test mips-tdep.c:mips_next_pc Mon Apr 13 22:32:51 1998 Frank Ch. Eigler * gdb.c++/virtfunc.cc: Make extern "C" printf declaration pass more rigorous EGCS C++ error checking. Fri Apr 10 22:38:12 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/help.exp: Clean up `help set args' and `help show args' tests. * gdb.base/interrupt.exp: Add "i*86-*-solaris2*" xfail for calling function when asleep. * gdb.base/signals.exp: Add "i*86-*-solaris2*" xfails. Add comment for i*86 Linux and SVR4 signal handling problems. Remove linux xfail for `next to handler in signals_tests_1', fixed by recent infrun.c change. Limit backtrace to 10 frames to avoid timeout problems with infinite stack backtraces. Adjust expect pattern in `handle all print' test to match Apr 28 1997 target.[ch] change. Tue Mar 31 00:40:32 1998 Bob Manson * lib/gdb.exp(gdb_test): Send multiline commands one at a time; wait for a newline from gdb before continuing. (default_gdb_exit): Just look for y or n. (gdb_test): Detect abnormal exit from GDB running on DOS; if it does, fail the rests of the tests in the file. Tue Mar 24 22:44:52 1998 Bob Manson * config/cygmon.exp: New file. Mon Mar 16 21:39:11 1998 Bob Manson * gdb.base/list.exp: Fix problem with "list default lines around main" test on remote targets. * gdb.base/scope.exp: Fix problem with filelocal_bss before run test on remote targets. Thu Mar 12 16:23:00 1998 Doug Evans * gdb.asm: New directory. * configure.in: Configure it. * configure: Regenerate. * gdb.asm/{Makefile.in,configure.in,configure}: New files. * gdb.asm/{asm-source.exp,asmsrc1.s,asmsrc2.s}: New files. Mon Feb 23 08:22:44 1998 Mark Alexander * config/mn10300-eval.exp: New file to support MN10300 eval board. Wed Feb 18 16:43:46 1998 Michael Snyder (msnyder@cygnus.com) * gdb.base/overlays (several files): Merge the two overlay managers into one. Change variables (foox, barx, bazx, grbxx) back into ints but force them to load in their proper sections. Thu Feb 12 13:49:30 1998 Andrew Cagney * gdb.base/d10vovly.c (D10VTranslate): Map IMAP0 to low 128k of on-chip insn memory and IMAP1 to upper 128k. (D10VCopy): Handle memory regions crossing 16k boundaries. (D10VCopy): Transfer data in 32 bit chunks. Tue Feb 10 17:23:22 1998 Andrew Cagney * gdb.base/overlays.c (main): Exit normally when result is correct. * gdb.base/d10v.ld: Update LMAs to reflect current d10v address map. Include space for printf in .text segment. * gdb.base/d10vovly.c (D10VTranslate): New function, handle updated d10v memory VMA/LMA map. (D10VCopy): Call D10VTranslate. Fri Feb 6 14:13:12 1998 Andrew Cagney * gdb.base/m32rovly.c: Force variable _novlys into .data section. * gdb.base/bar.c (barx, bar): Change variable to small array so that it won't be put into the .sdata - small data - section. Update reference. * gdb.base/baz.c (bazx, baz): Ditto. * gdb.base/foo.c (foox, foo): Ditto. * gdb.base/grbx.c (grbxx, grbx): Ditto. * gdb.base/overlays.exp: Expect variables barx, bazx, foox, grbxx to be arrays. Thu Jan 29 14:48:19 1998 Michael Snyder (msnyder@cygnus.com) * gdb.base/overlays.exp: fix up and get working again. Add tests for backtraces from an overlay function. Fri Jan 23 07:52:45 1998 Fred Fish * gdb.base/watchpoint.exp: Set "d10v*-*-*" clear_xfail for "calling function with watchpoint enabled". Thu Jan 22 14:23:29 1998 Fred Fish * gdb.base/break.exp (test_next_with_recursion): Remove gdb_suppress_tests for d10v-*-*. * lib/gdb.exp (gdb_suppress_tests): Disable this function pending review of whether it is useful or not. Tue Jan 20 13:02:09 1998 Mark Alexander * gdb.base/funcargs.exp: Increase timeout for slow TX39 boards. Mon Jan 19 08:53:04 1998 Mark Alexander * gdb.base/break.exp: Increase timeout for slow TX39 boards. * config/dve.exp: New file to support Densan boards. Mon Dec 15 22:38:05 1997 Andrew Cagney * gdb.base/interrupt.exp: Document problem of simulators, signals, reads and BSD. Wed Nov 26 22:29:18 1997 Bob Manson * config/monitor.exp: Be a bit less picky about the "Remote debugging" response. * gdb.c++/misc.exp: Call runto_main instead of doint it manually. Tue Nov 25 12:46:36 1997 Andrew Cagney * gdb.base/mips_pro.exp: Add "mips64*-*-elf" xfail for backtrace test. * gdb.base/funcargs.exp: Query GDB for target_sizeof_int, target_sizeof_long and target_bigendian_p. (structs_by_value, structs_by_reference): Check values according to targets word size and endianess. Mon Nov 24 16:37:06 1997 Andrew Cagney * gdb.base/langs.exp: For "continue to exit" ignore any trailing output. Fri Oct 17 13:24:43 1997 Stan Shebs * gdb.base/default.exp, gdb.base/help.exp, gdb.base/setshow.exp: Update test of set args help to match source change. Fri Sep 26 17:36:20 1997 Jason Molenda (crash@pern.cygnus.com) * gdb.base/default.exp: Expect help system output to be in alphabetical order. * gdb.base/help.exp: Ditto. Wed Sep 24 13:08:14 1997 Bob Manson * gdb.base/signals.exp: Change "i*86-pc-linux-gnu" to "i*86-pc-linux-gnu*". * gdb.base/interrupt.exp: Ditto. * gdb.base/corefile.exp: Ditto. * lib/gdb.exp(gdb_compile): If is_vxworks target feature is set, define vxworks when building the testcase. * gdb.base/ptype.exp: Fix testnames to be unique. * gdb.base/radix.exp: Ditto. * gdb.base/term.exp: Ditto. * gdb.base/whatis.exp: Ditto. * gdb.c++/classes.exp: Ditto. Tue Sep 16 22:21:48 1997 Bob Manson * gdb.base/callfuncs.exp: Fix indentation. * lib/gdb.exp(gdb_expect): Set remote_suppress_flag if suppress_flag has been set. (gdb_step_for_stub): Check for gdb,use_breakpoint_for_stub target feature. Mon Sep 15 15:43:17 1997 Bob Manson * gdb.stabs/weird.exp: Don't start gdb 'til after we've compiled the testcase. * gdb.c++/cplusfuncs.cc(main): Add extern "C" declaration for set_debug_traps() and breakpoint(). * gdb.c++/misc.cc (main): Ditto. * gdb.c++/templates.cc (main): Ditto. * gdb.c++/virtfunc.cc (main): Ditto. Fri Sep 12 16:56:38 1997 Bob Manson * lib/gdb.exp(gdb_step_for_stub): New function. (gdb_run_cmd): Look for gdb,do_reload_on_run target feature--if it exists, reload the executable and do a "continue" instead of doing a jump. (runto_main): Use gdb_step_for_stub. * gdb.base/break.exp: Use gdb_step_for_stub. Also, rename certain tests to have unique names. * gdb.base/callfuncs.exp: Ditto. * gdb.base/commands.exp: Ditto. * gdb.base/default.exp: Ditto. * gdb.base/help.exp: Ditto. * gdb.base/list.exp: Ditto. * gdb.base/opaque.exp: Ditto. * gdb.base/printcmds.exp: Ditto. Use a loop to emit multiple similar tests. * gdb.base/setshow.c: Add set_debug_traps/breakpoint calls. * gdb.c++/cplusfuncs.cc: Ditto. * gdb.c++/virtfunc.cc: Ditto. * config/monitor.exp: Keep track of the last file we saw, rather than trying to get the info from gdb. * gdb.fortran/types.exp: Move comment to previous line. Tue Sep 2 19:55:34 1997 Bob Manson * config/sparclet.exp: Detect gratuitous change to sparclet gdb target mode. Mon Jul 28 12:14:47 1997 Stan Shebs From Bob Manson: * config/monitor.exp (gdb_target_monitor): Look for "Connected to" string from GDB when it connects. * lib/gdb.exp: Look for $TOOL_EXECUTABLE. Thu Jul 3 15:35:12 1997 Bob Manson * lib/gdb.exp(get_debug_format): Don't cause the testsuite to fail if we can't get a debug format from GDB (we may be testing an older GDB). Use a 10 second timeout when checking for the format. * gdb.stabs/weird.exp: Fix quoting. * config/sparclet.exp: Renamed sparclet-loader.c to stub-loader.c. Mon Jun 30 18:31:43 1997 Bob Manson * config/arm-ice.exp: New file. Sun Jun 29 16:43:30 1997 Bob Manson * gdb.base/overlays.exp: Preliminary fixes; temporarily disabled until it has been modified to work with the new testsuite. * gdb.*/*.exp: Instead of causing 1 unresolved test when the testcase won't compile, cause all of the testcases in the file to fail instead. * lib/gdb.exp(gdb_suppress_entire_file): New procedure. (gdb_clear_suppressed): New procedure. (gdb_stop_suppressing_tests): Only clear suppress_flag if it contains a positive value. Sat Jun 28 13:31:11 1997 Bob Manson * lib/gdb.exp(default_gdb_start): Use gdb_opts host feature. * gdb.c++/virtfunc.exp: Remove setting of libs variable. Fri Jun 27 07:44:25 1997 Fred Fish * lib/gdb.exp (setup_xfail_format): New function. (get_debug_format): New function to get debug format. (debug_format): New global variable to hold last value set by get_debug_format. * gdb.base/list.exp: Call get_debug_format and expect some tests to fail for DWARF 1 and COFF formats. * gdb.c++/ptype.exp: Ditto. * gdb.c++/classes.exp: Ditto. * gdb.c++/cplusfuncs.exp: Ditto. * gdb.c++/inherit.exp: Ditto. * gdb.c++/templates.exp: Ditto. * gdb.c++/virtfunc.exp: Ditto. Wed Jun 25 09:08:51 1997 Bob Manson * lib/gdb.exp(default_gdb_exit): Don't give an error if the remote host doesn't have a currently-open connection. * config/sparclet.exp: Cleanups and fixes to make it generic for any gdb stub target. Handle cases where gdb doesn't respond when interrupted in a sane fashion. * config/m32r-stub.exp: Load sparclet.exp instead of trying to do the same thing in a totally different way. * config/monitor.exp: Pass in timeouts to gdb_expect instead of setting "timeout". (gdb_start): We set the global gdb_prompt variable in default_gdb_init now. Sun Jun 22 09:11:02 1997 Fred Fish * gdb.base/printcmds.exp: Fix "check for floating addition" regexp to accept results within approx +/- .01 of exact value. * lib/gdb.exp (gdb_test): Remove unused expect_out global decl. Wed Jun 18 11:11:39 1997 Bob Manson * lib/gdb.exp(gdb_init): Pass our arguments to default_gdb_init properly. (gdb_expect): Add optional timeout parameter, and add timeout value to various calls. (gdb_suppress_tests): Only give one warning message per group. Tue Jun 17 13:10:10 1997 Bob Manson * lib/gdb.exp(gdb_expect): Declare errorInfo and errorCode as global variables. Handle getting a value for $timeout more gracefully. Sat Jun 14 09:23:26 1997 Bob Manson * lib/gdb.exp: Close connection to remote host if gdb doesn't initialize. (default_gdb_init): New procedure; allow gdb_init to be overridden by a target configuration file. (gdb_expect): Pass the timeout to remote_expect. * config/monitor.exp(gdb_load): Fix typo in regexp. Thu Jun 12 20:57:12 1997 Bob Manson * gdb.base/funcargs.exp: Remove spurious suppress tests call. Tue Jun 3 15:20:20 1997 Bob Manson * config/monitor.exp(gdb_target_monitor): Call gdb_file_cmd here. Call gdb_target_exec before rebooting the target, to make sure the connection to the target is closed. (gdb_load): Pass the name of the executable to gdb_target_monitor. Don't call gdb_file_cmd here; let gdb_target_monitor do it. Also detect "Timeout reading from remote" error. * config/gdbserver.exp: Pass the executable being loaded to gdb_target_monitor. Don't call gdb_file_cmd here; let gdb_target_monitor do it. * gdb.disasm/hppa.exp: Don't use exec_output. Fri May 23 13:28:29 1997 Bob Manson * gdb.base/list.exp: If we're debugging a non-native target, try to set the pc register to point to the start of the program before doing the first list command. * gdb.c++/virtfunc.exp(gdb_virtfunc_restart): Make sure we run test_calls after restarting. * lib/gdb.exp(gdb_run_cmd): Send jump command again after reloading. * gdb.base/watchpoint.exp: Fix typo. * gdb.base/setshow.exp: Check for use_gdb_stub. * gdb.base/break.exp: Fix continue until exit test for the gdb stub case. * gdb.base/langs.exp: Ditto. * config/monitor.exp(gdb_load): Handle gdb_sect_offset and gdb_load_offset. If we weren't given a file to load, figure out what the current file is and use it. * config/i386-bozo.exp: New file. Thu May 22 18:51:32 1997 Bob Manson * lib/gdb.exp(gdb_expect): Look for gdb,timeout target feature. * config/proelf.exp: New entry. Wed May 21 21:23:16 1997 Bob Manson * lib/gdb.exp: Remove spurious .* patterns at the beginning of regexps. * gdb.base/watchpoint.exp: Don't run the test_stepping tests if gdb can't call functions on the target. * gdb.base/setshow.exp: Don't run the set prompt tests if the board has gdb_prompt set. Tue May 20 08:58:49 1997 Jeffrey A Law (law@cygnus.com) * gdb.base/a2-run.exp: Change "gdb,noargs" to just "noargs". * gdb.base/commands.exp: Likewise. * gdb.base/setshow.exp: Likewise. Mon May 19 15:37:50 1997 Bob Manson * config/monitor.exp(gdb_start): Look for gdb_prompt target feature. * config/i960.exp: New file. Thu May 1 18:01:50 1997 Bob Manson * gdb.base/funcargs.exp: Check for gdb,short_int target feature instead of looking for explicit target triplets. Mon Apr 28 17:27:40 1997 Michael Snyder * gdb.base/printcmds.exp: add a couple more tests a la "p 123DEADBEEF", to check parse_number. * top.c: change "to enable to enable" to "to enable" in a couple of help strings. Thu Apr 24 14:38:18 1997 Jeffrey A Law (law@cygnus.com) * gdb.base/callfuncs.exp: Mark some tests as expected to fail on the mn10300. Mon Apr 21 15:05:42 1997 Fred Fish * gdb.base/a2-run.exp: Add arm-*-coff setup_xfails for cases where the test executable is run with explicit args. * gdb.base/default.exp: Handle arm-*-coff case for "info float". Mon Apr 21 13:38:58 1997 Fred Fish * gdb.base/run.c: Use FAKEARGV to build test executable that does not require a command line arg, since most simulators don't currently support passing such an arg into the simulated program. * gdb.base/commands.exp: Change tests to insert the proper value as the arg to the first recursive factorial call. Change compilation line to define FAKEARGV at compile time. Wed Apr 9 11:12:36 1997 Jeffrey A Law (law@cygnus.com) * gdb.base/recurse.exp: Enable these tests for the mn10300. * gdb.base/watchpoint.exp: Don't expect a failure for an "calling function with watchpoint enabled" test. Tue Apr 8 19:33:20 1997 Bob Manson * gdb.base/watchpoint.exp(test_watchpoint_triggered_in_syscall): Don't call gdb_test when the command doesn't return to a gdb prompt. * lib/gdb.exp(gdb_stop_suppressing_tests): Don't print gratuitous "Tests restarted" messages. Tue Apr 8 16:38:46 1997 Jeffrey A Law (law@cygnus.com) * gdb.disasm/mn10300.exp: Fix buglets in "other" tests. Thu Apr 3 15:21:26 1997 Michael Snyder * gdb.base/help.exp: update help msg for INFO ADDR; add help test for INFO SYMBOL; add help tests for OVERLAY commands. * gdb.base/default.exp: add tests for INFO SYMBOL command; add tests for OVERLAY commands * gdb.base/overlays.c overlays.exp foo.c bar.c baz.c grbx.c ovlymgr.h d10v.ld m32r.ld d10vovly.c m32rovly.c: add test case for overlays. * gdb.base/sigall.c: add usestubs code frag * gdb.base/watchpoint.exp: turn on complex watchpoint test for M32R. Thu Apr 3 09:38:53 1997 Bob Manson * lib/gdb.exp(gdb_suppress_tests): Add explanation for subsequent failures. (gdb_stop_suppressing_tests): Note that tests have restarted. Wed Apr 2 19:04:20 1997 Bob Manson * config/h8300.exp: New file. Sun Mar 30 13:38:25 1997 Bob Manson * gdb.base/setshow.exp: Check for the existence of a feature, not its value. Sat Mar 29 11:19:46 1997 Bob Manson * gdb.c++/virtfunc.exp: Restart gdb in a sane fashion. * gdb.base/scope.exp: It's now init0(), not init(). * gdb.base/scope0.c: For now, change init() to be init0(). * config/monitor.exp: Use gdb_serial in preference to serial or netport. * lib/gdb.exp: Set GDB to [transform gdb] if we're using a remote host and it's not already set. Fri Mar 28 19:54:18 1997 Bob Manson * gdb.base/setshow.exp: Only test the run command if the target isn't using a stub and if it supports argument passing. Sat Mar 22 19:50:25 1997 Bob Manson * config/udi.exp(gdb_start): Make sure UDICONF is set properly before starting gdb. Mon Mar 24 14:40:33 1997 Jeffrey A Law (law@cygnus.com) * gdb.disasm/mn10300.s: New test file for mn10300 disassembler. * gdb.disasm/mn10300.exp: Run mn10300 disassembler tests. * gdb.disasm/Makefile.in: Remove "mn10300" when cleaning. Tue Mar 11 11:42:58 1997 Bob Manson * config/vx.exp: Use remote_ld, not vxworks_ld. Don't use specialized code to reboot the board, use remote_reboot instead. * config/vxworks29k.exp: Use vx.exp, not vx-gdb.exp. * lib/gdb.exp: Add GDB_TESTCASE_OPTIONS. * config/monitor.exp: Make sure we disconnect from the target. Also, try a reboot/reload cycle instead of failing if the load fails. Fri Mar 7 13:48:30 1997 Bob Manson * gdb.base/default.exp: Don't set match_max. * gdb.base/help.exp: Ditto. * gdb.base/list.exp: Ditto. * gdb.base/signals.exp: Ditto. * config/monitor.exp(gdb_load): If gdb,use_standard_load is set, use remote_ld to download the testcase instead of the GDB loader. Wed Mar 5 00:00:43 1997 Bob Manson * config/vr5000.exp: New file. * config/monitor.exp(gdb_target_monitor): Add pattern for "Ending remote" to detect errors in connecting. * gdb.base/setshow.exp: Add .* within auto language test. * lib/gdb.exp(gdb_run_cmd): Add check for gdb_init_command target feature. * config/monitor.exp(gdb_load): Check for a failure when loading, and reboot the board if necessary. * gdb.base/setvar.exp(test_set): Handle multiple prints within a set of tests. Remove print.* from the patterns being checked. Mon Mar 3 11:57:43 1997 Bob Manson * gdb.base/a1-selftest.exp: Use send_gdb consistently. Don't refer to gdb_spawn_id. * config/m32r-stub.exp: Remove references to gdb_spawn_id, no longer used. * config/sparclet.exp: Ditto. * config/sparclet-old.exp: Ditto. * config/slite.exp: Ditto. * config/sim.exp: Ditto. * gdb.base/funcargs.exp: Ditto. * lib/gdb.exp:Remove references to gdb_spawn_id. (gdb_expect): Move to remote.exp. Fri Feb 28 20:47:39 1997 Bob Manson * config/monitor.exp: Detect the "Couldn't establish connection" message from GDB. Tue Feb 25 14:08:55 1997 Bob Manson * gdb.base/bitfields.exp: Use runto instead of explicit gdb_run_cmd/gdb_expect sequences. * gdb.base/break.exp(text_next_with_recursion): Add match for gdb_expect call. * config/monitor.exp(gdb_target_monitor): Calling exit loses big. We also need to handle the "A program is being debugged already" prompt from gdb. Use gdb_test to set the baud rate. * lib/gdb.exp(gdb_init): Increase the default expect buffer size to 20000. Really. I mean it. Mon Feb 24 13:23:26 1997 Bob Manson * lib/gdb.exp(gdb_test): Generate a FAIL message when send_gdb fails. If suppress_flag is set, skip perror message about not being able to send to GDB. (send_gdb): If suppress_flag is set, don't try to send commands to GDB. (gdb_expect): If suppress_flag is set, always fail immediately. (gdb_suppress_tests, gdb_stop_suppressing_tests): New functions. (gdb_init): Call gdb_stop_suppressing_tests. (default_gdb_exit): Ditto. (default_gdb_start): Ditto. * gdb.base/bitfields.exp: Call gdb_suppress_tests and gdb_stop_suppressing_tests as appropriate. * gdb.base/break.exp: Ditto. * gdb.base/callfuncs.exp: Ditto. * gdb.base/commands.exp: Ditto. * gdb.base/exprs.exp: Ditto. * gdb.base/funcargs.exp: Ditto. * gdb.base/list.exp: Ditto. * gdb.base/recurse.exp: Ditto. * gdb.base/scope.exp: Ditto. * gdb.base/structs.exp: Ditto. * gdb.c++/inherit.exp: Ditto. Sun Feb 23 19:56:02 1997 Bob Manson * config/vr4300.exp: New file. * gdb.*/*.exp: Call gdb_expect instead of expect. * lib/gdb.exp(gdb_expect): New function. Thu Feb 20 13:57:01 1997 Bob Manson * lib/gdb.exp(gdb_init): New function. * gdb.base/setvar.exp(test_set): Don't bother printing a PASS/FAIL for each individual variable set. * gdb.base/exprs.exp(test_expr): Make sure each test gets a unique name. * gdb.base/help.exp: Fix the syntax of a few gdb_test calls. * gdb.base/scope.exp: Use gdb_test. * gdb.base/ptype.exp: Don't call "gdb_exit; gdb_start" if we're aborting; the testsuite driver will do that for us (see gdb_finish). Also, use gdb_test in a few more places. Thu Feb 20 13:32:24 1997 Stan Shebs * gdb.base/help.exp: Fix syntax of "help info all-registers" test. Thu Feb 20 10:34:21 1997 Jeffrey A Law (law@cygnus.com) * gdb.disasm/mn10200.s: Add "nop" after "main" so that "main" and "add_tests" are not at the same address. Fri Feb 14 18:47:23 1997 Bob Manson * gdb.base/ptype.exp: Use gdb_test. Thu Feb 13 16:09:36 1997 Jeffrey A Law (law@cygnus.com) * gdb.disasm/mn10200.s (misc_tests): Fix targets for "jsr" insns. * gdb.disasm/mn10200.exp (misc_tests): Remove bogus line accidentally left in. No longer expect them to fail. * gdb.stabs/*.mt; Deleted, no longer used. * gdb.stabs/configure.in: Remove references to target makefile frags. * gdb.stabs/configure: Rebuilt. * gdb.disasm/*.mt: Deleted, no longer used. * gdb.disasm/configure.in: Remove references to target makefile frags. Use "sh3.s" as the unique filename for this directory. * gdb.disasm/configure: Rebuilt. * gdb.disasm/mn10200.s: New test file for mn10200 disassembler. * gdb.disasm/mn10200.exp: Run mn10200 disassembler tests. * gdb.disasm/Makefile.in: Remove "mn10200" when cleaning. Tue Feb 11 16:57:58 1997 Bob Manson * config/udi.exp: Use mondfe,name instead of remote_host. Tue Feb 11 11:22:36 1997 Jeffrey A Law (law@cygnus.com) * gdb.base/watchpoint.exp: Don't expect a failure when calling a function with a watchpoint enabled on the mn10200. * gdb.stabs/weird.exp: Don't quit if "weird.s" doesn't exist before trying to create it! Mon Feb 10 16:40:47 1997 Bob Manson * config/vx.exp: Use hostname instead of netport. * config/vxworks.exp: New file. * gdb.base/a2-run.exp: Change vxworks cases to use gdb_spawn_id. * config/monitor.exp(gdb_target_monitor): Look for a prompt from gdb before assuming everything worked. Send a ^C if a timeout occurs. * lib/gdb.exp(gdb_test): Check the result of send_gdb. Use $gdb_spawn_id directly. (gdb_run_cmd): Try _start as well as start. Use the target feature gdb,start_symbol as the symbol to start from when jumping. Mon Feb 10 11:26:59 1997 Jeffrey A Law (law@cygnus.com) * gdb.base/exprs.exp: Delete bogus/incorrect (and probably redundant) test. * gdb.base/recurse.exp: Relax final value test for 'b' so that it doesn't lose for 16bit integer systems. Fri Feb 7 09:31:21 1997 Jeffrey A Law (law@cygnus.com) * gdb.fortran/types.exp: If the target doesn't support "double" data types, then expect "real" types to only be 4 bytes. * gdb.c++/virtfunc.exp: Expect failure for virtual function call tests if the target doesn't support inferior function calls. * gdb.base/printcmds.exp: Allow minor deviation in FP values in printf tests. Thu Feb 6 12:46:14 1997 Jeffrey A Law (law@cygnus.com) * gdb.base/help.exp: Disable "help set", "help show", and "help support". Simplify regexp for "help stack". * gdb.base/default.exp: Set match_max to 5000 and the timeout to 60 seconds. Temporarily set match_max to 15000 around the "info copying" test. * gdb.base/nodebug.exp: Don't try to do an inferior function call if the target doesn't support them. * gdb.base/printcmds.exp: Likewise. * gdb.base/setvar.exp: Likewise. * gdb.base/structs.exp: Likewise. * gdb.c++/templates.exp: Likewise. * gdb.base/ptype.exp: Likewise. Remove UDI specific stuff. * gdb.base/recurse.exp: Enable for the mn10200. * configure.in: Do configure gdb.stabs directory for *-*-elf targets. * configure: Rebuilt. * gdb.base/break.exp: Check for gdb,noresults before testing exit status and/or results from the target. * gdb.base/watchpoint.exp, gdb.base/langs.exp: Likewise. * lib/gdb.exp: Remove old (now bogus) initialization of noinferior, noargs, noresults and nosignals. Tue Feb 4 21:52:17 1997 Bob Manson * config/sh.exp: New file. * config/slite.exp: Try to connect multiple times to the board before rebooting. Only send a "monitor run" if need_monitor_run is set. * gdb.base/break.exp: Don't do the "stub continue" test if the target has gdb_stub set. * gdb.base/callfuncs.exp: Increase the timeout. * gdb.base/interrupt.exp: Don't even try to compile the testcase if the target has gdb,noinferiorio set. * gdb.base/list.exp: Increase match_max to 10000 characters. * gdb.base/sigall.exp: Check for gdb,nosignals on the target. * gdb.base/watchpoint.exp: Check for gdb,noinferiorio on the target. * lib/gdb.exp(gdb_run_cmd): Fix for targets that use stubs. Mon Feb 3 12:09:37 1997 Bob Manson * gdb.base/a1-selftest.exp: Make sure we call gdb_exit before trying to delete the copy of gdb. Catch the file delete so we don't die if the delete fails; also, the file should be copied to the host, not to the build. Sun Feb 2 00:55:14 1997 Bob Manson * lib/gdb.exp(gdb_test): Surround the result pattern with parenthesis in case it contains multiple regexps separated with |. * gdb.base/watchpoint.exp: Use gdb_test. * gdb.base/default.exp: Ditto. Sat Feb 1 23:51:01 1997 Bob Manson * gdb.*/*.exp: Replace $prompt with $gdb_prompt. * gdb.base/scope.exp: Use gdb_test. * gdb.c++/classes.exp: Ditto. * gdb.c++/inherit.exp: Ditto. Fri Jan 31 13:09:12 1997 Bob Manson * gdb.base/crossload.exp: Don't use execute_anywhere, use remote_exec instead. * gdb.base/corefile.exp: Don't be ridiculous. * gdb.base/*.c: Add missing stub invocations. Thu Jan 30 16:49:25 1997 Bob Manson * config/slite.exp: Miscellaneous fixes. * lib/gdb.exp: Fix runto. * gdb.base/signals.exp: Check for a gdb,nosignals feature of the target. * gdb.base/watchpoint.exp: Fix regexp. * lib/gdb.exp(default_gdb_exit): Add a catch to the close and wait commands, as the descriptor may now be invalid. Always call "remote_close host". Tue Jan 28 14:42:31 1997 Bob Manson Major rewrite for testsuite revision. * lib/gdb.exp: Remove references to global CC, CXX, B_OPTIONS, TARGET_INCLUDES, LDFLAGS and target_alias. Use gdb_spawn_id instead of relying on spawn_id to always contain a valid spawn id. (get_compiler_info): New procedure to build the ${binfile}.ci file, instead of replicating this in N different places. (gdb_compile): New procedure. gdb.*/*.exp: Use gdb_compile and get_compiler_info (with appropriate arguments) instead of compile. Use gdb_test in a lot more places. Use send_gdb instead of send. Always run gdb_start at the start of a testcase, as this is no longer done magically. config/*-gdb.exp: Rename without the -gdb suffix. config/mips.exp: Use remote_close instead of exit_remote_shell. config/monitor.exp: Use target_info instead of looking at baud, timeout, etc. config/sim.exp: Use gdb_spawn_id instead of relying on spawn_id. Sat Dec 14 00:43:57 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.c++/templates.exp (test_ptype_of_templates), gdb.c++/inherit.exp (test_ptype_si, test_print_anon_union): Update expect patterns for destructors and assignment operators to match corresponding c-typeprint.c changes. * gdb.c++/templates.exp (test_template_breakpoints): Revert change to destructor breakpoint test, GDB should be able to set the destructor breakpoint without specifying arguments. Tue Dec 3 20:17:52 1996 Fred Fish * gdb.threads/pthreads.exp: Change result for failure to compile due to lack of pthreads runtime support from an error to simply an unsupported test, per dejagnu standards. Sun Dec 1 00:18:59 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * lib/gdb.exp (gdb_test): Simplify expect pattern for the case where GDB exits to reduce pattern match time. (skip_chill_tests): Skip chill tests for mips*-sgi-irix6*. * gdb.base/nodebug.exp: Add mips*-sgi-irix6* xfails. Tue Nov 26 18:29:23 1996 Michael Snyder * gdb.base/callfuncs.exp: Turn on function call tests for h8300. * gdb.base/default.exp: ditto. * gdb.base/nodebug.exp: ditto. * gdb.base/printcmds.exp: ditto. * gdb.base/ptype.exp: ditto. * gdb.base/setvar.exp: ditto. * gdb.base/structs.exp: ditto. * gdb.base/setshow.c: Guard against uninitialized values of argc. Tue Nov 26 17:23:28 1996 Ian Lance Taylor * configure, */configure: Rebuild with autoconf 2.12. Sat Nov 23 13:32:15 1996 Fred Fish * gdb.base/a1-selftest.exp: Change x86 linux setup_xfails to use new i*86-pc-linux*-gnu quads. * gdb.base/corefile.exp: Ditto. * gdb.base/signals.exp: Ditto. * gdb.base/sigall.exp: Ditto. * gdb.base/interrupt.exp: Ditto. * gdb.base/signals.exp (signal_tests_1): Remove setup_xfail "i*86-*-linux" for "signal SIGUSR1". Now works, at least with RedHat 4.0. * gdb.threads/pthreads.c (_MIT_POSIX_THREADS): Define if target is linux. This allows the test case to at least compile on latest linux, but still not run due to missing the threads runtime library. Fri Nov 22 10:13:29 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/a1-selftest.exp (do_steps_and_nexts): Reinitialize source directory to search gdb directory. Accept and step over conditional stack alignment code. Consume $prompt in failure cases. Reset timeout to $oldtimeout instead of some arbitrary value. * gdb.base/nodebug.exp: Limit backtrace to 10 frames to avoid timeout problems with infinite stack backtraces. * gdb.base/ptype.exp (ptype struct link, union tu_link): Accept function parameters for linkfunc member. Thu Nov 21 09:17:19 1996 Fred Fish * lib/gdb.exp (CFLAGS): Remove, unreferenced. (CXXFLAGS): Remove, unreferenced. (B_OPTIONS): Add for -B options and add code to initialize with previous -B options and also add -B option to pick up cross compiled runtime. (TARGET_INCLUDES): Add for -I options and add code to initialize when doing cross compiles. (target_alias): Declare global. (xgcc): Set variable to full path of gcc in build tree. Use findfile to verify that gcc exists in build tree, and if so set CC to that gcc and to use B_OPTIONS and TARGET_INCLUDES. Tue Nov 12 16:20:13 1996 Fred Fish * gdb.c++/inherit.exp (test_print_anon_union): Reenable ptype test for anonymous union. Fixup testcase to match current gcc debug output. Mon Nov 11 14:12:06 1996 Jeffrey A Law (law@cygnus.com) * gdb.base/funcargs.c: Use cast rather than "UL" suffix to force argument to an unsigned long type. Mon Nov 11 10:27:55 1996 Fred Fish * gdb.c++/inherit.exp (test_ptype_si): Fix tagless struct ptype tests and anonymous union print/ptype tests. * gdb.base/list.exp (test_forward-search): Increase timeout by 5 minutes for the "search extremely long line" case. * lib/gdb.exp (gdb_test): Document that the third arg to gdb_test is completely optional and that the pass/fail messages use the command as the message if that third arg is a null string. (gdb_test_exact): Arrange that a null string pattern means match a null string output rather than any output, which might include random errors. * gdb.base/mips_pro.exp: Add "mips*-sgi-irix4*" xfail for backtrace test. * gdb.c++/demangle.exp: Add a "*-*-*" xfail for test that was always failing and failure is now exposed by gdb.exp changes. Sat Nov 9 11:13:24 1996 Fred Fish * gdb.c++/inherit.exp (test_ptype_vi): Log some passes that weren't being noted. Sat Nov 9 01:05:10 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/corefile.exp: Consume $prompt in mmap fail cases. * gdb.stabs/weird.exp: Remove v_comb xfails. Tue Nov 5 10:44:23 1996 Michael Snyder * gdb.base/[bitfields.exp crossload.exp funcargs.exp interrupt.exp list.exp scope.exp watchpoint.exp] Make all timeout error msgs explicitly say "(timeout)". Mon Nov 4 12:03:06 1996 Michael Snyder * config/monitor.exp: Increase download timeout to 1000 seconds. Mon Nov 4 12:02:26 1996 Michael Snyder * config/m32r.exp: Increase timeout to 120 seconds. Sun Nov 3 14:37:05 1996 Fred Fish * gdb.c++/classes.exp: Modify to handle current gcc C++ member ordering and accept older ordering as obsolescent gcc or gdb. * gdb.c++/templates.exp: Ditto. * gdb.c++/virtfunc.exp: Ditto. Fri Nov 1 11:56:09 1996 Fred Fish * gdb.base/coremaker.c: Add code to mmap some data so we can check that it ends up in the core file. * gdb.base/corefile.exp: Add test to read mmapped data from core file. Wed Oct 30 18:19:16 1996 Michael Snyder * config/m32r.exp: New file. Mon Oct 21 14:40:50 1996 Stu Grossman (grossman@critters.cygnus.com) * testsuite/gdb.base/nodebug.exp: Whack out -g options by hand so that cflags can contains -gstabs, and work correctly for other tests. Mon Oct 21 14:00:37 1996 Michael Snyder * gdb.base/setshow.exp: New file, tests show and set. * gdb.base/setshow.c: New file, tests show and set. * gdb.base/help.exp: Add test for help set|show annotate. * gdb.base/default.exp: Add test for set|show annotate. Wed Oct 16 19:03:54 1996 Stu Grossman (grossman@critters.cygnus.com) * testsuite/gdb.base/break.exp: Make backtrace from factorial errors unique. * testsuite/gdb.base/nodebug.exp: Whack out all -g options explicitly. Tue Oct 15 16:45:02 1996 Stu Grossman (grossman@critters.cygnus.com) * config/sim-gdb.exp (gdb_target_sim): Remove setting of height and width commands. This is done elsewhere. * (gdb_start): Don't call gdb_start_sim here. That's already done in gdb_load. This fixes lots of failures in default.exp. Sun Oct 13 10:40:23 1996 Fred Fish From Peter Schauer : * gdb.base/mips_pro.exp: Fix misplaced gdb_exit/gdb_start/gdb_load. * lib/gdb.exp (gdb_test): Treat failures due to program exiting in the same we we treat other failures (since it may be an expected condition), rather than as an error. * gdb.base/signals.exp (test_handle_all_print): Revert back to old test format. Fri Oct 11 17:05:22 1996 Fred Fish * Makefile.in (clean mostlyclean): Also remove chill *.grt files. (distclean maintainer-clean realclean): No need to remove files twice. Nuke the duplicates. * gdb.base/Makefile.in (EXECUTABLES): Add "structs". * gdb.threads/Makefile.in (distclean maintainer-clean realclean): Remove config.h along with other config files. Mon Sep 30 20:16:22 1996 Fred Fish * gdb.base/interrupt.exp: Add i*86-*-linux* setup_xfail for "p func1 ()" and note that rests of tests are skipped. * gdb.base/corefile.exp: Add i*86-*-linux* and m68*-*-hpux* setup_xfails for "print func2::coremaker_local". Add i*86-*-linux* setup_xfail for "backtrace in corefile.exp". * gdb.base/mips_pro.exp: Restart gdb in this test so it isn't affected by the previous run test. * gdb.chill/misc.exp: Add m68*-*-hpux* setup_xfails for "print array () ubyte (foo)" and "print/x array () byte (\$i)" * gdb.chill/pr-8742.exp: Add m68*-*-hpux* setup_xfails for "pass int powerset tuple" and "pass modeless int powerset tuple". * gdb.chill/tests2.exp: Add m68*-*-hpux* setup xfails for "real write 4" and "real write 8". * gdb.shill/tuples.exp: Add i*86-*-linux* and m68*-*-hpux* setup_xfails for "print vs1 after tuple assign 2", "print \$i after tuple assign 2", and "print vs2 after tuple assign 2". * lib/gdb.exp (gdb_test): When a gdb aborts, print a more meaningful error message and return -1 so the caller can suppress further tests and avoid a cascade of errors. Fri Sep 27 10:34:51 1996 Fred Fish * gdb.base/a1-selftest.exp: Tweak tests to account for new format for printing version. * gdb.base/default.exp: Ditto. * gdb.base/interrupt.exp: Fix problem with cascade of errors if child process dies while calling a function. Fri Sep 13 21:43:48 1996 Fred Fish * Makefile.in (VPATH): Add * Makefile.in (Makefile, config.status): Fix rules so things get remade when necessary. Fri Sep 13 18:16:10 1996 Fred Fish * Makefile.in (just-check): Add path to sibling expect dir to environment variable specified by RPATH_ENVVAR. Fri Sep 13 12:05:34 1996 Fred Fish * Makefile.in (RPATH_ENVVAR): New var, set to @RPATH_ENVVAR@. (just-check): Add shared library paths for libstdc++, tk, tcl, bfd, and opcodes to the environment variable specified in RPATH_ENVVAR. * configure.in: Add support to recognize --enable-shared flag and generate correct value for RPATH_ENVVAR. * configure: Regenerated with autoconf. Mon Sep 2 06:36:02 1996 Fred Fish * gdb.base/break.exp: Expand "Delete all breakpoints" xfail to include all osf versions. * gdb.threads/pthreads.exp: Expand "run to main" xfail to include all osf versions. Add -D_MIT_POSIX_THREADS to compilation command when target is linux. When failing to build pthreads test executable, give more meaningful message. * gdb.threads/pthreads.c: Hpux also uses old definition of second arg for pthread_create. Mon Aug 19 09:58:59 1996 Fred Fish * gdb.threads/pthreads.c (PTHREAD_CREATE_ARG2, PTHREAD_CREATE_NULL_ARG2): Accomodate old pthreads implementations. * gdb.threads/pthreads.exp: Try linking with both -lpthread (Solaris) and -lpthreads (everybody else). (test_startup): Fail gracefully if threads are not supported. * gdb.base/nodebug.exp: Add setup_xfail hppa*-*-hpux* for "p/c array_index("abcdef",2)" when not gcc compiled. * gdb.base/corefile.exp: Add setup_xfail hppa*-*-hpux* for "print func2::coremaker_local" when not gcc compiled. * gdb.base/opaque.exp: Remove setup_xfail hppa*-*-hpux* for "ptype on opaque struct tagname (statically)", "ptype on opaque struct tagname (dynamically) 1", and "ptype on opaque struct tagname (dynamically) 2" for not compiled with gcc. * gdb.base/mips_pro.exp: Only do setup_xfail hppa*-*-* for backtrace when compiled with gcc. * lib/gdb.exp (runto_main): Return result of "runto main" rather than always return success. Sat Aug 17 13:28:00 1996 Fred Fish * gdb.c++/virtfunc.exp: Remove setup_xfail for "mips-*-irix5*". Tue Aug 13 10:26:10 1996 Jeffrey A Law (law@cygnus.com) * gdb.base/structs.exp: Undo last change. Mon Aug 12 15:29:08 1996 Fred Fish * gdb.base/a1-selftest.exp (do_steps_and_nexts): New routine to encapsulate all the steps/nexts done during self test, starting at main, and makes them less sensitive to optimization issues. Add "hppa*-*-hpux*" to setup_xfail for "backtrace through signal handler" test. * gdb.threads/pthreads.exp: Only run this for native configs. * gdb.base/structs.exp (do_function_calls): Add hppa*-*-hpux9*" setup_xfails for "p fun5()", "p fun6()", "p fun7()", and "p fun8" tests. gdb.c++/virtfunc.exp (do_tests): Add "mips-*-irix5*" setup_xfail for "runto test_calls(void)" test. Sun Aug 11 13:11:24 1996 Fred Fish * gdb.base/term.exp: Set 7-bit strings, address off, width to 0, and don't expect address info in breakpoint confirmations. Wed Aug 7 20:47:43 1996 Fred Fish * gdb.base/list.exp (test_forward_search): Increase timeout temporarily by 60 seconds for searching extremely long line, and then reset to old value when done. Increase expect input buffer to 10000. Wed Aug 7 15:34:22 1996 Fred Fish * gdb.base/list.exp (test_forward_search): Fix to handle very long source line without overflowing expect's input buffer. Wed Aug 7 12:03:25 1996 Tom Tromey * config/slite-gdb.exp (gdb_start): Use "full_buffer", not "buffer_full". * config/nind-gdb.exp (gdb_start): Use "full_buffer", not "buffer_full". * config/mips-gdb.exp (gdb_start): Use "full_buffer", not "buffer_full". * lib/gdb.exp (gdb_test): Correct pattern is "full_buffer", not "buffer_full". Wed Aug 7 11:05:47 1996 Fred Fish * configure.in (configdirs): Add gdb.threads. * configure: Regenerated with autoconf. * gdb.threads/{config.in, pthreads.c, pthreads.exp}: New. * gdb.threads/{Makefile.in, configure.in}: Complete rewrites. * gdb.threads/configure: New, generated with autoconf. Tue Aug 6 10:23:04 1996 Tom Tromey * lib/gdb.exp (gdb_test_exact): Turn \n in pattern into \r\n. Mon Aug 5 18:11:53 1996 Fred Fish * gdb.base/signals.exp (test_handle_all_print): Test separately for each signal's status in the output of "handle all print". * lib/gdb.exp (gdb_test): Document that the pattern must NOT include the \r\n sequence that immediately precedes the gdb prompt. * gdb.base/a1-selftest.exp: Save original timeout and restore after test. Sun Aug 4 10:20:50 1996 Jeffrey A Law (law@cygnus.com) * gdb.disasm/hppa.s: Export fmemLRbug_tests_4 as a ST_CODE symbol. Fri Aug 2 17:37:26 1996 Brendan Kehoe * config/vx-gdb.exp (gdb_start): Fix syntax of `$shell_id < 0'. Thu Jun 27 20:41:40 1996 Fred Fish * gdb.base/signals.exp (test_handle_all_print): Temporarily increase timeout by 60 seconds. Thu Jun 27 18:13:57 1996 Fred Fish * config/unix-gdb.exp: Increase default timeout from 30 to 60 sec. * config/netware.exp (gdb_run_cmd): Restore old timeout before doing error return. Thu Jun 27 10:54:58 1996 Fred Fish * lib/gdb.exp (default_gdb_start): When reporting a timeout during gdb initialization, also report how long dejagnu waited. Restore old timeout before doing error return. Temporarily increase timeout by 3 minutes to allow for slow startups over heavy NFS use. Tue Jun 25 19:59:17 1996 Fred Fish * lib/gdb.exp: Report timeout value for verbosity level 2. * config/gdbserver.exp: Ditto. * config/hppro.exp: Ditto. * config/mips-gdb.exp: Ditto. * config/monitor.exp: Ditto. * config/netware.exp: Ditto. * config/sim-gdb.exp: Ditto. * config/slite-gdb.exp: Ditto. * config/udi-gdb.exp: Ditto. * config/unix-gdb.exp: Ditto. * config/vx-gdb.exp: Ditto. * gdb.base/a1-selftest.exp: Ditto. * gdb.base/a2-run.exp: Ditto. * gdb.base/break.exp: Ditto. * gdb.base/corefile.exp: Ditto. * gdb.base/list.exp: Ditto. * gdb.base/recurse.exp: Ditto. * gdb.base/scope.exp: Ditto. * gdb.base/signals.exp: Ditto. Tue Jun 25 23:16:58 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) * gdb.threads/Makefile.in (docdir): Removed. Tue Jun 25 17:02:39 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) * configure.in (AC_PREREQ): autoconf 2.5 or higher. * gdb.{base,c++,chill,disasm,stabs}/Makefile.in (VPATH): set to @srcdir@. * gdb.{base,c++,chill,disasm,stabs}/configure.in (AC_PREREQ): autoconf 2.5 or higher. * gdb.{base,c++,chill,disasm,stabs}/configure: Rebuilt. Thu Jun 13 11:16:10 1996 Tom Tromey * configure: Regenerated. * aclocal.m4 (CY_AC_PATH_TCLH, CY_AC_PATH_TKH): Use odd names to avoid name clashes with SunOS headers. Wed Jun 5 16:43:27 1996 Jeffrey A Law (law@cygnus.com) * gdb.c++/virtfunc.exp: Search $objdir/../../libstdc++ for libstdc++. Thu May 30 11:35:11 1996 Jeffrey A Law (law@cygnus.com) * gdb.base/callfuncs.exp: Finish last change -- make sure the prototype information ends up in the compiler info file. Thu May 23 12:48:41 1996 Fred Fish * gdb.base/callfuncs.exp: Remove the compiler info file prior to attempting to regenerate it. Eliminate use of a temporary file and just generate the info file directly. Source it immediately, for consistency of use. * gdb.base/corefile.exp: Ditto * gdb.base/exprs.exp: Ditto. * gdb.base/funcargs.exp: Ditto. * gdb.base/langs.exp: Ditto. * gdb.base/list.exp: Ditto. * gdb.base/mips_pro.exp: Ditto. * gdb.base/nodebug.exp: Ditto. * gdb.base/opaque.exp: Ditto. * gdb.base/ptype.exp: Ditto. * gdb.base/scope.exp: Ditto. * gdb.base/setvar.exp: Ditto. * gdb.base/signals.exp: Ditto. * gdb.base/whatis.exp: Ditto. * gdb.c++/templates.exp: Ditto. * gdb.c++/virtfunc.exp: Ditto. * gdb.c++/virtfunc.exp: Use contents of gcc_compiled to decide whether or not to add -lstdc++ to the compile command line args. Sat May 18 02:43:58 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/recurse.exp: Remove setup_xfail for "sparc*-*-sunos4*", it got fixed by the recent lookup_minimal_symbol_by_pc change. Increase timeout, a lot of single stepping might be needed if the target has no hardware watchpoints. Wed May 15 08:47:42 1996 Jeffrey A Law (law@cygnus.com) * gdb.base/break.exp: Ignore compiler warnings when compiling break.c. * gdb.base/callfuncs.exp: Don't run these tests on the h8300. * gdb.base/default.exp: Add h8300 xfails. Handle messages from remote-sim. * gdb.base/exprs.exp: Add h8300 xfails. * gdb.base/funcargs.exp: Likewise. * gdb.base/nodebug.exp: Likewise. * gdb.base/printcmds.exp: Likewise. * gdb.base/ptype.exp: Likewise. * gdb.base/setvar.exp: Handle sizeof (int) != 4 for h8300. Add h8300 xfails. * gdb.base/return.exp: Handle float/double precision problems on the h8300. * gdb.base/funcargs.c: Explicitly make last constant argument to call_after_alloca_subr an unsigned long type. * gdb.base/return.c: Include stdio.h. Tue May 7 22:01:12 1996 Rob Savoye * config/abug.exp: New file for the older Motorola Bug monitor that runs on the mvme13x series VME boards. * config/monitor.exp: Use the new config array for target settings if they exist. Fri May 3 16:02:55 1996 Stan Shebs * sim-gdb.exp: Make the SH simulator allocate less space when it is targeted. Thu May 2 12:31:56 1996 Jeffrey A Law (law@cygnus.com) * gdb.base/mips_pro.exp: Expect failure for hppa*-*-* in backtrace test. Wed Mar 20 08:48:03 1996 Fred Fish * gdb.base/list.exp (test_list_function): Remove setup_xfail for "rs6000-*-*" for "list function in include file" when gcc compiled. * gdb.base/printcmds.exp: Remove setup_xfail for "rs6000-*-aix*" for "p ctable1[120]". * gdb.base/scope.exp: Remove setup_xfail for "rs6000-*-*" for "print 'scope0.c'::filelocal_bss before run" when gcc compiled. Remove setup_xfail for "rs6000-*-*" for "print 'scope0.c'::filelocal before run". * gdb.base/{langs.exp, lists.exp, opaque.exp, scope.exp}, gdb.stabs/weird.exp: Remove use of compiler options "-c -o ..." since some compilers don't allow both options to be given on the same command line. Create object file and move it. Tue Mar 19 23:49:31 1996 Fred Fish * gdb.base/corefile.exp: Always regenerate the core file, since we always regenerate the coremaker program. Detect special case where registers cannot be read from core file. Tue Mar 19 16:52:49 1996 Fred Fish From Peter Schauer * gdb.base/funcargs.c: Patch for SPARCworks alloca compatibility * gdb.c++/templates.exp: Only match on basename of file since some formats like xcoff don't encode directory information. * gdb.stabs/weird.exp: Use the right sed script for powerpc and rs6000 AIX xcoff targets. * configure.in: Add stabsdirs to configdirs for powerpc-*-aix*. * configure: Regenerate. * gdb.base/Makefile.in (clean): Remove generated file twice-tmp.c here, rather than in distclean. Sun Mar 17 13:35:31 1996 Fred Fish * gdb.base/mips_pro.exp: Create mips_pro.ci to get gcc_compiled defined, and use it to compile the test case with -O2. The native compilation still uses no optimization. * gdb.base/mips_pro.c: Remove inline assembly code since it is compiled PIC by default, which results in assembler warnings that make the testsuite think the compilation was unsuccessful. Sat Mar 16 15:02:24 1996 Fred Fish * gdb.c++/misc.exp: Add note to message for "print s.a for foo struct" that this is a known gcc 2.7.2 and earlier bug. Fri Mar 15 17:49:57 1996 Fred Fish (fnf@cygnus.com) * gdb.base/break.exp: Fix pattern for matching "Delete all breakpoints (y or n) ". Add "mips-dec-ultrix*" to setup_xfail for deleting all breakpoints test. Fix various timeout messages to include "(timeout)". * gdb.base/callfuncs.exp: Add "i*86-*-sysv4*" to setup_xfail for "p t_float_values2(3.14159,float_val2)". * gdb.base/funcargs.exp: Remove "mips-sgi-irix4*" setup_xfail for "continue to call2g" when gcc compiled. * gdb.base/langs.exp: Remove "i*86-*-sysv4*" setup_xfail for "up to foo in langs.exp", "show language at foo in langs.exp", "show language at cppsub_ in langs.exp", "up to fsub in langs.exp", and "show language at fsub in langs.exp". * gdb.base/list.exp: Remove "*-*-sysv4*" setup_xfail for "list line 1 in include file", "list message for lines past EOF", "list function in include file", "list list0.h:foo", and "list filename:function; nonexistant function". * gdb.base/ptype.exp: Change "i*86-*-sysv4*" setup_xfail for "whatis unnamed typedef'd enum (compiler bug in IBM's xlc)" and "ptype t_char_array" to be for native cc only. Fri Mar 15 16:17:22 1996 Fred Fish * gdb.base/corefile.exp: Remove "alpha-dec-osf2*" native compiled setup_xfail for "print coremaker_bss", "print coremaker_ro", "print func2::coremaker_local", and "backtrace in corefile.exp". Wed Mar 13 14:54:11 1996 Fred Fish * gdb.base/signals.exp: Remove "alpha-*-osf2*" setup_xfail for "bt in signals.exp". This problem only appears when running the testsuite, and then only intermittently. Tue Mar 12 15:00:16 1996 Stan Shebs * gdb.base/return.exp (return_tests): Differentiate between two tests of continuing. Tue Mar 5 14:33:33 1996 Stan Shebs * */Makefile.in (maintainer-clean): Remove config.log. * gdb.base/Makefile.in (EXECUTABLES): Replace twice with twice-tmp. * gdb.c++/Makefile.in (PROGS): Add inherit. (clean): Remove *.ci. Tue Feb 20 16:36:10 1996 Fred Fish * gdb.c++/misc.cc: Add test code from Mike Stump. * gdb.c++/misc.exp: Add test to print s.a, for Mike Stump. Sun Feb 18 11:39:12 1996 Fred Fish * gdb.base/signals.exp: Change setup_xfail for "alpha-*-osf2" to "alpha-*-osf2*" and add comment. * gdb.base/a1-selftest.exp (test_with_self): Remove "alpha-dec-osf2*" setup_xfail for "step over execarg initialization" and "step over corearg initialization". * gdb.base/callfuncs.exp (do_function_calls): Restore setup_xfail for "hppa*-*-*", "sparc-*-*", "mips*-*-*", and "alpha-dec-osf2*". * gdb.base/corefile.exp: Add "alpha-dec-osf2*" setup_xfail when not gcc compiled for "print coremaker_bss", "print coremaker_ro", "print func2::coremaker_local", and "backtrace in corefile.exp". * gdb.base/signals.exp: Build and source signals.ci. Change "alpha-dec-osf2*" setup_xfail for "bt in signals.exp" to be for gcc only. * lib/gdb.exp: Move verbose statements outside conditionals. Sat Feb 17 02:22:14 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/sigall.exp: Remove setup_xfail for irix4. Fixed by Feb 3 procfs.c change. Fri Feb 16 13:25:31 1996 Fred Fish * config/unix-gdb.exp: Remove extraneous newlines from end of file. Thu Feb 15 08:12:55 1996 Fred Fish * config/unix-gdb.exp: Default timeout in UNIX case to 30 seconds, up from dejagnu's apparent default of 10 seconds, which gives random results when running the tests over NFS on moderately loaded systems. * lib/gdb.exp (gdb_run_cmd): Add "(timeout)" in timeout case. Mon Feb 12 16:50:28 1996 Fred Fish * gdb.base/callfuncs.exp: Remove setup_xfail for PR 5318. Now fixed. * gdb.base/a2-run.exp: Replace $binfile with $testfile in test result reports. Fri Feb 9 15:56:51 1996 Fred Fish * configure.in (CY_AC_PATH_TCLH): Remove. * configure: Regenerate. Fri Feb 9 08:21:31 1996 Fred Fish * gdb.c++/Makefile.in (clean): Add missing '{'. Fri Feb 2 10:19:40 1996 Jeffrey A Law (law@cygnus.com) * lib/gdb.exp: Provide a default value for noinferior. * lib/gdb.exp: Fix typos (LDLAGS -> LDFLAGS). Load libgloss.exp. Thu Feb 1 20:20:14 1996 Jeffrey A Law (law@cygnus.com) * gdb.disasm/hppa.exp: Compile directly into an executable, use the executable, not the .o to run the tests from. Wed Jan 31 14:21:09 1996 Jeffrey A Law (law@cygnus.com) * gdb.base/break.exp: Don't test for program exit or exit status if $noresults if nonzero. * gdb.base/langs.exp: Likewise. * gdb.base/watchpoint.exp: Likewise. * gdb.base/default.exp: Remove extraneous call to load gdb.exp. * gdb.chill/pr-8405.exp: Move skip_chill_tests check to just before trying to compile the testcase. Wed Jan 24 23:42:39 1996 Doug Evans * gdb.base/interrupt.exp (p func1): xfail sparc64-*-solaris2. * gdb.base/signals.exp (continue to handler): Likewise. Tue Jan 23 16:28:22 1996 Per Bothner * gdb.c++/classes.exp: Now = returns false/true, not 1/0. * gdb.fortran/exprs.exp: .LT. and .GT. now return .TRUE. or .FALSE.. Tue Jan 23 15:41:57 1996 Jeffrey A Law (law@cygnus.com) * gdb.base/corefile.exp: Recognize "not found" as failure when trying to determine if a core file was generated. If no core file was generate the first time, try again without the ulimit -c to work around braindamaged shells. Mon Jan 15 09:33:00 1996 Fred Fish * gdb.stabs/configure.in (alpha-*-*,mips-*-*): Replace [] tests with "test" and enclose string in quotes. * gdb.stabs/configure: Rebuild Thu Jan 11 09:43:14 1996 Tom Tromey Changes in sync with expect: * aclocal.m4 (CY_AC_PATH_TCLH): Handle Tcl 7.5 and greater. (CY_AC_PATH_TCLLIB): Handle Tcl 7.5 and greater. (CY_AC_PATH_TKH): Handle Tk 4.1 and greater. (CY_AC_PATH_TKLIB): Handle Tk 4.1 and greater. Properly quote argument to AC_REQUIRE. * configure: Regenerated. Thu Jan 4 08:17:22 1996 Fred Fish * gdb.base/corefile.exp: When generating a core, discard any error messages about ulimit not found and the "core dumped" message from the shell that runs the coredumper. Wed Jan 3 01:30:41 1996 Jeffrey A Law (law@cygnus.com) * lib/gdb.exp (skip_chill_tests): Skip them on the PA too. * gdb.stabs/weird.exp: Use ${target_triplet} to determine which sed script to run. Expect failure for v_comb test on PA targets too. Sat Dec 30 16:09:04 1995 Fred Fish * gdb.base/corefile.exp: Remove "i*86-*-linux" xfail for "print func2::coremaker_local" and for "backtrace in corefile.exp" Sat Dec 30 12:59:12 1995 Fred Fish * lib/gdb.exp: Fix typo and rewrite skip_chill_tests. * gdb.stabs/weird.exp: Setup "sparc-sun-sunos4*" and "sparc-sun-solaris*" xfails for "p v_comb". * lib/gdb.exp (default_gdb_start): Fix typo. * gdb.base/corefile.exp: Allow "Core was generated by ..." messages to not include the full program name that caused the core dump since some systems (such as solaris) apparently truncate this path to about 80 characters. When generating a core file first try increasing the core file size limit to unlimited since some systems may default it to zero, and it is harmless to try it. Move the test for failing to generate a core file to where it will actually get executed. * gdb.c++/templates.exp (test_ptype_of_templates): Accept new gdb result from g++ debug info improvements and make old pattern obsolescent. Also account for size_t differences (may be int or long). * gdb.base/a1-selftest.exp (test_with_self): Check for case where initialization before function call is placed in the delay slot and thus appears to be skipped over by commands such as "next". Fri Dec 29 16:09:20 1995 Stan Shebs * gdb.base/a1-selftest.exp (test_with_self): Run without windows. Wed Dec 6 10:45:42 1995 Jeffrey A. Law * gdb.base/*.exp: Make ${srcfile} only be the basename of the input source file; fix code to compile test to deal with this convention. * gdb.c++/*.exp: Likewise. Mon Nov 27 11:40:16 1995 Fred Fish * gdb.base/signals.exp: Setup "alpha-*-osf2*" xfail for "bt in signals.exp". Sat Nov 25 20:52:15 1995 Fred Fish * gdb.base/a1-selftest.exp: Add alpha-dec-osf2 setup_xfail for "step over execarg initialization" and "step over corearg initialization". Sat Nov 25 18:20:14 1995 Fred Fish * gdb.base/ptype.c (main): Declare malloc as a "char *" for systems with sizeof(pointer) > sizeof(int). Avoid "void *" or include files. Sat Nov 25 11:03:42 1995 Fred Fish From Rob Savoye (rob@poseidon.cygnus.com) * Makefile.in, configure.in, gdb.base/{Makefile.in, configure.in}, gdb.c++/{Makefile.in, configure.in}, gdb.chill/{Makefile.in, configure.in}, gdb.disasm/{Makefile.in, configure.in}, gdb.stabs/{Makefile.in, configure.in}, gdb.threads/{Makefile.in, configure.in}: Major reworking for autoconfig. * aclocal.m4, configure, gdb.base/configure, gdb.c++/configure, gdb.disasm/configure, gdb.stabs/configure, gdb.stabs/default.mt : New files. * config/unix-gdb.exp: Make GDB global. * gdb.base/{a1-selftest.exp, a2-run.exp,bitfields.exp, break.exp, callfuncs.exp, commands.exp, corefile.exp, crossload.exp, exprs.exp, funcargs.exp, interrupt.exp, langs.exp, list.exp, mips_pro.exp, nodebug.exp, opaque.exp, printcmds.exp, ptype.exp, recurse.exp, regs.exp, return.exp, scope.exp, setvar.exp, sigall.exp, signals.exp, term.exp, twice.exp, watchpoint.exp, whatis.exp}, gdb.c++/{classes.exp, callfuncs.exp, inherit.exp, misc.exp, templates.exp, virtfunc.exp}, gdb.chill/{callch.exp, chillvars.exp, misc.exp, pr-4975.exp, pr-5016.exp, pr-5020.exp, pr-5022.exp, pr-5646.exp, pr-5984.exp, pr-6292.exp, pr-6632.exp, pr-8134.exp, pr-8136.exp, result.exp, string.exp, tuples.exp}, gdb.disasm/{hppa.exp, sh3.exp}, gdb.stabs/weird.exp: Change continues to returns as necessary, arrange for test to compile own testcase executable. * lib/gdb.exp: Changes for testsuite to compile own test cases. Tue Nov 21 16:15:45 1995 Fred Fish * gdb.c++/classes.exp (test_pointers_to_class_members): Add clear_xfail at end of test which might not call either pass or fail. * gdb.base/a1-selftest.exp: Add i*86-*-linuxaout xfail for "backtrace through signal handler". Sat Nov 18 04:09:31 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/sigall.exp: Work around OSF/1-3.x kernel bug when continuing from a job control stop signal. * gdb.stabs/alpha.mt: Use $(CFLAGS) when building weird.o. Wed Nov 15 00:28:03 1995 Jeffrey A Law (law@cygnus.com) * gdb.base/callfuncs.exp: Remove bogus hppa xfails. * gdb.base/corefile.exp: Likewise. * gdb.base/funcargs.exp: Likewise. Tue Nov 14 15:18:10 1995 Stu Grossman (grossman@cygnus.com) * config/hmsirom.exp: Setup for talking to hmsi ROM monitor. * config/monitor.exp: Add support for setting baud rate. Sat Nov 4 15:35:52 1995 Fred Fish * gdb.base/a1-selftest.exp: Remove i*86-*-sysv4* and i*86-*-linux* xfails for "backtrace through signal handler". * gdb.base/corefile.exp: Add i*86-*-sysv4* xfail for "print func2::coremaker_local". * gdb.base/break.exp: Add i*86-*-sysv4*, sparc-sun-sunos4, alpha-dec-osf2* xfail for "delete all breakpoints when none". Wed Nov 1 15:57:16 1995 Fred Fish * gdb.base/break.exp: Change test that deletes all breakpoints when no user breakpoints are installed. A post 4.15 change causes gdb to no longer prompt in this case. Tue Oct 31 15:13:43 1995 Fred Fish * gdb.base/return.exp (return_tests): Change xfail for test "correct value returned double test" to stop xfailing at Solaris 2.5. Apparently the bug has been fixed. Sun Oct 29 12:18:16 1995 Fred Fish * gdb.stabs/ecoff.sed: Remove comment lines except for first one. IRIX 4.0 /bin/sed chokes on them, though they work fine elsewhere. Tue Oct 24 11:12:12 1995 Jeffrey A Law (law@cygnus.com) * gdb.disasm/hppa.exp: Test lci and syncdma instructions. * gdb.disasm/hppa.s: Corresponding changes. Wed Oct 18 11:27:47 1995 Jeffrey A Law (law@cygnus.com) * gdb.base/configure.in (hppa*-*-hpux*): No longer needs target makefile fragment. * config/mt-hpux: Deleted. Tue Oct 17 23:02:12 1995 Jeffrey A Law (law@cygnus.com) * Many files: When warning about suppressed tests due to a nonexistant test binary, avoid incrementing the warning count. Tue Oct 10 11:00:41 1995 Fred Fish * Makefile.in (TARGET_FLAGS_TO_PASS): Remove BISON. Sun Oct 8 04:23:14 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/return.exp: Change xfail from "sparc-*-solaris2.*" to "sparc-*-solaris2*". Sat Sep 23 01:22:23 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/coremaker.c: Produce a full core dump for AIX targets. Add global and local variables and initialize them. * gdb.base/corefile.exp: Test correct mapping of corefile sections by printing variables. Remove rs6000 and powerpc xfails, BFD now extracts the file name and terminating signal from the core file. * TODO: Remove note about tests for correct mapping of corefile. * gdb.base/ptype.c (main): Use boolean2 to inhibit AIX 4.1 xlc from optimizing it away. * gdb.stabs/weird.exp: Remove rs6000 xfail, xcoffread.c now handles common blocks. Thu Sep 21 01:28:10 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/sh3.s (fmac): Update for new assembler syntax * gdb.disasm/sh3.exp (fmac): Corresponding changes. Wed Sep 20 13:15:05 1995 Ian Lance Taylor * Makefile.in (maintainer-clean): New target, synonym for realclean. * gdb.base/Makefile.in (maintainer-clean): Likewise. * gdb.c++/Makefile.in (maintainer-clean): Likewise. * gdb.chill/Makefile.in (maintainer-clean): Likewise. * gdb.disasm/Makefile.in (maintainer-clean): Likewise. * gdb.stabs/Makefile.in (maintainer-clean): Likewise. * gdb.threads/Makefile.in (maintainer-clean): Likewise. Sun Sep 10 13:14:01 1995 Fred Fish * gdb.base/scope.exp (text_at_main): Add "hppa*-*-hpux*" xfails when not gcc compiled for "print foo::funclocal". (test_at_foo): Add "hppa*-*-hpux*" xfails when not gcc compiled for: "print foo::funclocal at foo", "print 'scope1.c'::foo::funclocal at foo", "print foo::funclocal_bss at foo", "print 'scope1.c'::foo::funclocal_bss at foo", "print foo::funclocal_ro at foo", "print 'scope1.c'::foo::funclocal_ro at foo", "print bar::funclocal at foo" and "print 'scope1.c'::bar::funclocal at foo". (test_at_bar): Add "hppa*-*-hpux*" xfails when not gcc compiled for "print foo::funclocal at bar". Expand all messages to ensure that they identify that the test is at bar(). * gdb.base/opaque.exp: Add "hppa*-*-hpux*" xfails when not gcc compiled for: "ptype on opaque struct pointer (statically)", "ptype on opaque struct tagname (statically)", "ptype on opaque struct pointer (dynamically) 1", "ptype on opaque struct tagname (dynamically) 1", "ptype on opaque struct pointer (dynamically) 2" and "ptype on opaque struct tagname (dynamically) 2 * gdb.base/nodebug.exp: Add "hppa*-*-hpux*" xfails when not gcc compiled for: "p datalocal" "whatis datalocal", "ptype datalocal", "p bsslocal", "whatis bsslocal", and "ptype bsslocal". * gdb.base/langs.exp: Add "hppa*-*-hpux*" xfails for "backtrace in langs.exp" and "up to langs0__2do in langs.exp" when not gcc compiled. * gdb.base/funcargs.exp (float_and_integral_args): Add "hppa*-*-hpux*" xfail for "run to call2a" when not gcc compiled. (discard_and_shuffle): Add "hppa*-*-hpux*" xfail for "backtrace from call6a" when not gcc compiled. (shuffle_round_robin): Add "hppa*-*-hpux*" xfail for "backtrace from call7a" when not gcc compiled. * gdb.base/callfuncs.exp (do_function_calls): Add "hppa*-*-hpux*" xfail when not gcc compiled for "p t_char_array_values(char_array_val2,char_array_val1)", "p t_char_array_values(char_array_val1,char_array_val2)", "p t_char_array_values("carray 1","carray 2")", "p t_char_array_values("carray 1",char_array_val2)", "p t_char_array_values(char_array_val1,"carray 2")", "p sum_args(1,{2})", "p sum_args(2,{2,3})", "p sum_args(3,{2,3,4})", "p sum_args(4,{2,3,4,5})" * gdb.base/corefile.exp: Add "hppa*-*-hpux*" xfail for "backtrace in corefile.exp" when not gcc compiled. Sat Sep 9 01:35:39 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/signals.exp: Rewrite `handle all print' test as a procedure. Accept blanks or TABs as whitespace, increase timeout and expect input buffer size for the large output from the command. Remove "i*86-*-bsdi2.0" xfail. Sat Sep 2 06:41:26 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/setvar.exp: Add new testcases for truncation when assigning invalid values to bitfields. Sat Sep 2 00:17:31 1995 Fred Fish * gdb.base/callfuncs.exp (do_function_calls): Remove mips-sgi-irix* xfail for "call inferior func with struct - returns char *" and fix test so that an optional (unsigned char *) cast is accepted in the result. Fri Sep 1 13:42:01 1995 Fred Fish * gdb.base/funcargs.exp (float_and_integral_args): Remove sparc-sun-solaris2* xfail for "print f1 after run to call2a". * gdb.c++/Makefile.in (SUFFIXES): Add .SUFFIXES and ".cc" suffix. * gdb.base/signals.exp: Remove duplicate "handle all print" test that accidentally got checked in. Sun Aug 27 23:35:35 1995 Fred Fish * gdb.base/callfuncs.exp (do_function_calls): Add alpha-dec-osf2* clear_xfail for "p t_float_values2(3.14159,float_val2)" for gcc compiled test. * gdb.base/opaque.exp (setup_xfail_on_opaque_pointer): Add mips-sgi-irix5* xfail for not gcc compiled. * gdb.base/Makefile.in (nodebug.o): Also create nodebug.ci. * gdb.base/nodebug.exp: Add mips-sgi-irix5 xfail when not gcc compiled for "p top", "whatis top", "p middle", and "whatis middle". * gdb.base/whatis.exp: Add mips-sgi-irix* xfail for "whatis signed char" for not gcc compiled. * gdb.base/setvar.exp: Add mips-sgi-irix4* xfail (works on irix5) for "set variable signed char=-1 (-1)" and "set variable signed char=0xFF (0xFF)" for not gcc compiled. * gdb.base/funcargs.exp (float_and_integral_args): Add mips-sgi-irix5* xfail for "run to call2a" for not gcc compiled. Add mips-sgi-irix* xfail when not gcc compiled for "continue to call2b". Add mips-sgi-irix4* xfail (works with irix5) when gcc compiled for "continue to call2g". (discard_and_shuffle): Add mips-sgi-irix5* xfail whn not gcc compiled for "backtrace from call6a" (shuffle_round_robin): Add mips-sgi-irix* xfail when not gcc compiled for "backtrace from call7k". Add mips-sgi-irix5* xfail when not gcc compiled for "backtrace from call7a". (localvars_after_alloca): Fix gdb_test cmds for "print * after runto ...". Remove rs6000-*-* xfails for "print i after runto localvars_after_alloca" and "print l after runto localvars_after_alloca" for all compilers. * gdb.base/exprs.exp: Add mips-sgi-irix4* xfails (works with irix5), when not compiled with gcc, for: "print signed char == (minus)", "print signed char != (minus)", "print signed char < (minus)", "print signed char > (minus)". * gdb.base/callfuncs.exp (do_function_calls): Add mips-sgi-irix* xfail, when compiled with native compiler, for "call inferior func with struct - returns char *". * gdb.base/return.exp (return_tests): Change xfail for "correct value returned double test" to include Solaris 2.4. * gdb.base/funcargs.exp (float_and_integral_args): Add sparc-sun-solaris2* xfail for "print f1 after run to call2a". Sat Aug 26 00:26:11 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/setvar.c, gdb.base/setvar.exp: Add new tests for enumeration bitfields if compiling with GNU C. * lib/gdb.exp: Consume `(y or n) ' in `Reinitialize source path to empty' prompt. Tue Aug 22 00:30:37 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/scope.exp: xfail 'scope0.c'::filelocal_bss before run test for PRO targets. * gdb.base/funcargs.exp: Avoid ever setting more than 8 breakpoints in the inferior at any given time by making two groups of breakpoints for call2*, call6* and call7* tests. Sun Aug 20 06:58:25 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/funcargs.exp: Fix typos introduced by Aug 15 change. * gdb.base/callfuncs.c (main): Use struct_val1 to inhibit xlc from optimizing it away. * gdb.base/callfuncs.exp: Remove rs6000-*-* xfails for "call inferior func with struct". Wed Aug 16 11:57:15 1995 Stan Shebs * configure.in: Only configure gdb.chill for particular targets. Tue Aug 15 09:42:44 1995 Fred Fish * gdb.base/Makefile.in: Add action to .c.o transformation rule that generates a .ci file for each .o file and remove explicit .c.o rules except for callfuncs.o. * gdb.c++/Makefile.in: Add .cc.o transformation rule that generates a .ci file for each .o file and remove explicit .cc.o rules. (clean): Remove *.tmp *.ci files. (EXECUTABLES): Remove templ-info.exp. * gdb.base/compiler.c: New file. * gdb.c++/compiler.cc: New file * gdb.base/scope.exp: Source gdb.base/scope.ci. Change rs6000-*-* xfail for "print 'scope0.c'::filelocal_ro" and "print 'scope1.c'::filelocal" and "print 'scope1.c'::filelocal_bss" and "print 'scope1.c'::filelocal_ro" and "print 'scope1.c'::foo::funclocal" and "print 'scope1.c'::foo::funclocal_ro" and "print 'scope1.c'::bar::funclocal" and "print 'scope0.c'::filelocal_ro" and "print 'scope1.c'::filelocal at foo" and "print 'scope1.c'::filelocal_bss at foo" and "print 'scope1.c'::filelocal_ro at foo" and "print 'scope1.c'::foo::funclocal at foo" and "print 'scope1.c'::foo::funclocal_bss at foo" and "print 'scope1.c'::foo::funclocal_ro at foo" and "print 'scope1.c'::bar::funclocal at foo" and "print 'scope0.c'::filelocal_ro" and "print 'scope1.c'::filelocal" and "print 'scope1.c'::filelocal_bss" and "print 'scope1.c'::filelocal_ro" and "print 'scope1.c'::foo::funclocal" and "print 'scope1.c'::foo::funclocal_bss" and "print 'scope1.c'::foo::funclocal_ro" and "print 'scope1.c'::bar::funclocal" and "print 'scope1.c'::bar::funclocal_bss" to only be xfail'd when not compiled with gcc. Add rs6000-*-* xfail for "print 'scope0.c'::filelocal_bss before run" when compiled with gcc. (test_at_main): Add rs6000-*-* xfail for "print filelocal_ro in test_at_main" when compiled with gcc. * gdb.base/ptype.exp: Source gdb.base/ptype.ci. Add rs6000-*-aix* xfail for "whatis unnamed typedef'd enum (compiler bug in IBM's xlc)" and "ptype t_char_array", not compiled with gcc. * gdb.base/list.exp (test_list_function): Add rs6000-*-* xfail for "list foo (in include file)" when gcc compiled. * gdb.base/funcargs.exp: Source gdb.base/funcargs.ci (integral_args): Add rs6000-*-* xfail for "run to call0a" if not compiled with gcc. (unsigned_integral_args): Add rs6000-*-* xfail for "run to call1a" if not compiled with gcc. (float_and_integral_args): Add rs6000-*-* xfail for "run to call2a" if not compiled with gcc and for "continue to call2b" for any compiler. Add rs6000-*-* xfail to "print f1 after run to call2a" for gcc compiled. (discard_and_shuffle): Add rs6000-*-* xfail for "run to call6a". (shuffle_round_robin): Add rs6000-*-* xfail for "backtrace from call7a" if not compiled with gcc. Add rs6000-*-* xfail for "backtrace from call7b" if compiled with gcc. (call_after_alloca): Add rs6000-*-* xfail for "print c in call_after_alloca" and "print s in call_after_alloca" and "backtrace from call_after_alloca_subr" if not compiled with gcc. (localvars_in_indirect_call): Add rs6000-*-* xfail for "print c in localvars_in_indirect_call" and "print c in localvars_in_indirect_call" and "backtrace in indirectly called function" and "stepping into indirectly called function" if not compiled with gcc. (localvars_after_alloca): Add rs6000-*-* xfail for "print c after runto localvars_after_alloca" and "print s after runto localvars_after_alloca" and "print i after runto localvars_after_alloca" and "print l after runto localvars_after_alloca" for all compilers. * gdb.base/whatis.exp: Source gdb.base/whatis.ci rather than whatis-info.exp. * gdb.base/opaque.exp: Source gdb.base/opaque0.ci rather than opaque-info.exp. Setup rs6000-*-* xfail for "ptype on opaque struct pointer (statically)" and "ptype on opaque struct pointer (dynamically)" when not compiled with gcc. * gdb.base/callfuncs.exp: Source gdb.base/callfuncs.ci rather than callf-info.exp. (do_function_calls): Add clear_xfail for rs6000-*-* for "p t_float_values2(3.14159,float_val2)". Seems to work fine there, both with xlc and gcc. Need to find out what it is doing right and fix other platforms. * gdb.base/callfuncs.exp: Add rs6000-*-* xfail for "call inferior func with struct - returns int", "call inferior func with struct - returns long", "call inferior func with struct - returns float", "call inferior func with struct - returns double", "call inferior func with struct - returns char *", but only if not gcc compiled (presumes xlc compiled). Change rs6000-*-* xfails for "call inferior func with struct - returns char" and " call inferior func with struct - returns short" to only xfail if not using gcc. (clean mostlyclean): Remove *.ci and *.tmp files. * gdb.c++/templates.exp: Source gdb.c++/templates.ci rather than templ-info.exp. * gdb.base/langs.exp: Source gdb.base/langs.ci. Add rs6000-*-* xfail for "up to foo in langs.exp" "up to cppsub_ in langs.exp" and "up to fsub in langs.exp" when not gcc compiled. Sat Aug 12 15:05:36 1995 Jeffrey A. Law * gdb.base/callfuncs.exp: Add xfails for the powerpc. * gdb.base/corefile.exp: Likewise. * gdb.base/list.exp: Likewise. * gdb.base/scope.exp: Likewise. * gdb.base/siganls.exp: Likewise. * gdb.base/nodebug.exp: Add xfails for the powerpc. Handle aix4 compiler output. * gdb.base/whatis.exp: Likewise. Fri Aug 11 13:36:20 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/sh3.exp (all_fp_misc_tests): No longer expect a failure (opcode table has been fixed to match reality). Mon Aug 14 09:01:59 1995 Fred Fish * gdb.base/callfuncs.exp: Add rs6000-*-* xfails for "call inferior func with struct - returns char", "call inferior func with struct - returns short" * gdb.base/scope.exp: Remove rs6000-*-* xfails for "print 'scope0.c'::filelocal at main", "print 'scope0.c'::filelocal_bss in test_at_main", "print 'scope0.c'::filelocal at foo", "print 'scope0.c'::filelocal_bss in test_at_foo", "print 'scope0.c'::filelocal at bar", "print 'scope0.c'::filelocal_bss in test_at_bar" * gdb.base/list.exp: Remove rs6000-*-* xfail for "list function in source file 1". This bug seems to have been fixed with both gcc and native cc (was native assembler bug?). Wed Aug 9 08:04:12 1995 Fred Fish (fnf@cygnus.com) * gdb.base/a1-selftest.exp: Change "i*86-*-sysv4" xfail for "backtrace through signal handler" to "i*86-*-sysv4*". * gdb.base/signals.exp: Add xfail for "'next' behaved as continue" case. Add "known SVR4 bug" to fail message. Add "i*86-*-bsdi2.0" xfail for "handle all print". Add "i*86-*-bsdi2.0" xfail for "backtrace in signals_tests_1". * gdb.base/ptype.exp: Add "i*86-*-sysv4*" xfail for "whatis unnamed typedef'd enum..." and "ptype t_char_array". * gdb.base/langs.exp: Add "i*86-*-sysv4*" xfail for "up to foo in langs.exp", "show language at foo in langs.exp", "up to cppsub_ in langs.exp", "show language at cppsub_ in langs.exp", "up to fsub in langs.exp", and "show language at fsub in langs.exp". * gdb.base/corefile.exp: Add "i*86-*-sysv4*" to xfail for "bactrace in corefile.exp". * gdb.base/callfuncs.exp: Change xfail to "i*86-*-*" for "call inferior function with struct - returns float" and "call inferior function with struct - returns double". Mon Aug 7 02:43:28 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/sh3.s: Source for sh3 disassembler tests. * gdb.disasm/sh3.exp: Run the sh3 disassembler tests. * gdb.disasm/configure.in (sh-*-*): Use sh3.mt makefile fragment. * gdb.disasm/sh3.mt: Makefile fragment for sh3 ests. Mon Aug 7 08:09:37 1995 Fred Fish * Makefile.in (CHILL_FOR_TARGET): Use previously defined (or overriden) "CHILL" macro rather then bare "gcc". Also look for ../../gcc/xgcc since that is what we will actually need, not "Makefile". Remove following assignment of CHILL to CHILL_FOR_TARGET because that results in recursive definition. Sun Aug 6 16:52:29 1995 Fred Fish * gdb.base/corefile.exp: Change xfail for backtrace in corefile.exp from linuxaout to all linux. * gdb.base/sigall.exp (test_one_sig): Specifically deal with cases where we miss the breakpoint at the signal handler for some reason. Setup xfail for linuxoldld/linuxaout and getting SIGIO. Setup xfail for linuxoldld/linuxaout for hitting SIGURG breakpoint. * gdb.base/signals.exp: Setup xfail for "next" acting like continue to add linuxoldld. Setup xfail for all linux for "next to handler in signals_tests_1", "backtrace in signals_tests_1", "continue to func1", "pass SIGUSR1", and continue to handler". Thu Aug 3 10:45:37 1995 Fred Fish * Update all FSF addresses except those in COPYING* files. Sun Jul 30 17:50:35 1995 Fred Fish * gdb.base/a2-run.exp: Change messages to be more explicit about the status of args, and quote binfile in results. Sun Jul 30 10:24:20 1995 Fred Fish * gdb.base/callfuncs.exp: Add tests for passing structs to inferior functions and return various types. * gdb.base/callfuncs.c: Add functions to receive a struct and return a member of the struct, in various types. Sat Jul 29 14:22:33 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/Makefile.in (clean): Remove callf-info.exp. Fri Jul 28 13:36:11 1995 Brendan Kehoe * config/vxworks29k.exp: New file, sources vxworks.exp. Fri Jul 28 00:28:36 1995 Jeffrey A. Law * config/gdbremote.exp: New file. Testing framework using gdbserver. Thu Jul 27 12:17:14 1995 Fred Fish (fnf@cygnus.com) * gdb.base/interrupt.exp: Setup "i*86-*-linux" xfail for "call function when asleep" and "send end of file". * gdb.base/corefile.exp: Add "i*86-*-linuxaout" to xfail list for "backtrace in corefile.exp". * gdb.base/a1-selftest.exp: Add "i*86-*-linux*" to xfail list for "backtrace through signal handler". * gdb.base/corefile.exp: Make sure we actually generate a core file before trying the core tests. Some systems allow the user to suppress generation of core files and default to that (linux for example). * gdb.base/signals.exp: Change xfail for "next" acting like "continue" from "i*86-*-linux" to "i*86-*-linuxaout". Works with ELF beta. Tue Jul 25 17:30:10 1995 Jeffrey A. Law * gdb.threads: New directory with some crude multi-threaded gdb tests (step.exp and step2.exp). * config/mt-lynx (STEP_EXECUTABLE): Define. (THREADFLAGS): Define. Tue Jul 25 01:03:52 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/sigall.exp: Avoid losing in SIGPRIO test on lynx. * gdb.base/signals.exp: Disable whole file for lynx until further notice. * gdb.base/signals.exp: xfail test where "next" acts like "continue" for lynx. * gdb.base/interrupt.exp: xfail test for calling function while inferior is asleep for lynx. * gdb.base/watchpoint.exp: Handle more cases of gdb echoing more than one cr-lf after each command. Sun Jul 23 23:33:18 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * configure.in: Reinstate setting of stabsdirs variable, fix typo in setting up configdirs for native builds. * gdb.base/return.exp: Fix typo in return double test. * gdb.base/return.c (tmp2, tmp3): Made global to inhibit the compiler from optimizing them away. Fri Jul 21 11:39:34 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/gdbvars.exp: Expect zero or more additional cr-lf sequences to be echo'd by gdb when using gdb_test. * gdb.chill/chexp.exp: Likewise. * gdb.fortran/exprs.exp: Likewise Thu Jul 20 13:28:36 1995 Jeffrey A. Law * gdb.base/a1-selftest.exp: Reset the timeout value to 30 seconds after the inferior gdb has started. * gdb.base/a2-run.exp: Handle gdb echoing more than one cr-lf after each command. * gdb.base/funcargs.exp: Likewise. * gdb.base/gdbvars.exp: Likewise. * gdb.base/interrupt.exp: Likewise. * gdb.base/list.exp: Likewise. * gdb.base/watchpoint.exp: Likewise. * gdb.c++/demangle.exp: Likewise. * gdb.c++/inherit.exp: Likewise. * gdb.chill/chexp.exp: Likewise. * gdb.fortran/exprs.exp: Likewise. * gdb.base/watchpoint.exp: Disable watchpoint triggered in syscall test if we can't handle IO to/from the inferior. * gdb.c++/misc.exp: Always check for a program already being started after sending a "run" command to gdb. * gdb.base/twice.exp: Start with a fresh gdb. * gdb.chill/chexp.exp: Remove skip_chill_tests check; these tests only depend on gdb's expression code, not the chill runtime. * gdb.base/return.c: Put return values into variables so we can have gdb print them rather than depending on the program to print them. * gdb.base/return.exp: Corresponding changes. * lib/gdb.exp: Provide default value for noinferiorio. * gdb.base/interrupt.exp: Skip tests if we can't handle IO to/from the inferior. * gdb.base/break.exp: Always check for a program already being started after sending a "run" command to gdb. (text_next_with_recursion): Don't check the output from the program's printf statement. Instead just make sure the program exited. * gdb.base/commands.exp: Protect tests which need arguments with $noargs conditionals. Wed Jul 19 22:42:43 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/printcmds.exp: Adjust expect patterns for addresses of structure member arrays to match gdb/valops.c:value_addr change. Mon Jul 17 10:12:27 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/a1-selftest.exp: Fix unmatched quotes in many timeout cases. Wed Jul 12 10:20:08 1995 Fred Fish (fnf@cygnus.com) * configure.in (configdirs): Remove gdb.chill from default list of subdirs and then add it back in only if doing a native build. The current chill compiler does not yet work in any cross build. * Revert all signal changes from Jul 6. * gdb.base/{sigall.c signals.c}: Define away signal() and alarm() for sh-hms targets, allowing these tests to link, with no other changes. Testing is suppressed by setting "nosignals" in site.exp. Thu Jul 6 20:58:30 1995 Fred Fish (fnf@cygnus.com) * configure.in (signaldirs): Define and add to configdirs for all targets except some specific ones that are known to not support signals. Also clean up formatting. * gdb.base/Makefile.in (EXECUTABLES): Remove sigall and signals. (signals, sigall): Remove rules to build. * gdb.base/{sigall.c, sigall.exp, signals.c, signals.exp}: Moved to new gdb.signals directory. * gdb.signals: New test directory. * gdb.signals/{Makefile.in, configure.in, sigall.c, sigall.exp, signals.c signals.exp}: New or moved files. Sun Jun 25 12:55:18 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/interrupt.exp: Don't choke if $nointerrupts doesn't exist. Wed Jun 21 16:35:55 1995 Fred Fish * gdb.base/return.exp: Xfail `return double' test failure on at least Solaris 2.3 and handle future/past versions on a case by case basis as appropriate. Also update message to include i*86 failures. Wed May 24 07:10:10 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in: Change variable CFLAGS to TESTSUITE_CFLAGS. * lib/gdb.exp: Fix comment which erroneously identified gdb_file_cmd as gdb_load (the 19 May change was in fact to gdb_file_cmd not gdb_load). * config/unix-gdb.exp (gdb_load): Add "upvar timeout timeout". * gdb.base/setvar.exp: Make test names consistent between pass and fail cases. Use gdb_test more. Fri May 19 07:22:58 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp (gdb_load): Add "upvar timeout timeout". Mon May 15 23:50:51 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/help.exp: Fix expected help string for `show commands'. Thu May 11 07:55:11 1995 Jim Kingdon * gdb.stabs/xcoff.sed: Change N_LSYM to C_DECL not C_LSYM. * gdb.stabs/weird.exp: Remove xfail for xcoff bitching about lack of a text section. Thu May 11 15:02:24 1995 Stu Grossman (grossman@andros.cygnus.com) * config/monitor.exp (gdb_target_monitor): Fix loop interator so that loop eventually terminates. Fix Connection refused logic so that testsuite will expire nicely. Wed May 10 17:57:35 1995 Stu Grossman (grossman@andros.cygnus.com) * config/cpu32bug.exp, config/est.exp, config/hppro.exp, config/rom68k.exp: New tcl glue for the appropriate monitors. These all just end up calling monitor.exp. * config/monitor.exp (gdb_target_monitor): Handle `Connection refused' by retrying. Cleanup some timeout issues. * (gdb_load): Reduce timeout. Cleanup some timeout issues. * lib/gdb.exp (gdb_test gdb_test_exact): Upvar timeout so that callers don't have to set/restore global timeout variable. * The following set of changes centralizes management of the global timeout variable. This way, it can be set in one target dependent place instead of dozens of places scattered throughout the test suite. If you need to lengthen a timeout, then you should either set timeout in one of the config/{target}.exp files, or multiply it by a factor. Setting it to an absolute value is always going to lose for some targets. * gdb.base/a1-selftest.exp (test_with_self): Only use local timeout. * gdb.base/callfuncs.exp (do_function_calls): Don't set timeout. * gdb.base/funcargs.exp: Don't set timeout. * gdb.base/list.exp (test_forward_search): Only use local timeout. * gdb.base/printcmds.exp (test_print_string_constants test_print_array_constants): Don't set timeout. * gdb.base/ptype.exp: Don't set timeout. * gdb.base/recurse.exp: Don't set timeout. * gdb.base/return.exp: Don't set timeout. * gdb.base/watchpoint.exp: Don't set timeout. * gdb.c++/classes.exp (do_tests): Don't set timeout. * gdb.c++/virtfunc.exp (test_virtual_calls): Don't set timeout. Wed May 10 16:03:23 1995 Torbjorn Granlund * Makefile.in: Make clean targets work also when SUBDIRS is empty. Mon May 1 07:32:48 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp: Disable chill tests for irix5. Wed Apr 26 07:36:03 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/scope.exp: Make test names unique. Use gdb_test. Make each test pass or fail. Sun Apr 23 21:32:32 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/opaque.exp: Remove xfails for aix; print a warning if xlc not gcc. Fri Apr 21 15:44:02 1995 Stu Grossman (grossman@rtl.cygnus.com) * cpu32bug.exp est.exp rom68k.exp: Delete. Unify into monitor.exp. Wed Apr 19 17:41:21 1995 Stu Grossman (grossman@cygnus.com) * config/est.exp: Fix copyright and comments. Remove dead code. Use targetname, serialport and baud variables instead of fixed constants. * config/rom68k.exp: Fix copyright and comments. Remove dead code. * config/cpu32bug.exp: New file to support cpu32bug monitors. Wed Apr 19 13:47:16 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/watchpoint.exp: Don't run test_watchpoint_triggered_in_syscall for sunos. Mon Apr 17 12:48:52 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/{break.c,run.c}: Don't include vxWorks.h or stdioLib.h; they don't seem to exist. Do include stdio.h. Fri Apr 14 09:40:22 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/a1-selftest.exp: Add alpha xfail. Mon Apr 10 13:07:50 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/watchpoint.c (main): Prompt before calling read(). * gdb.base/watchpoint.exp (test_watchpoint_triggered_in_syscall): Revise accordingly. Remove cruft about sending "123" several times, until it gets noticed. Clean up the "print buf[0]" stuff so that it passes or fails, and waits for prompts in the usual way. Sun Apr 9 09:02:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/recurse.exp: Fix comment. * TODO: Remove item about printing variables in nodebug.exp. Add item about enabling tests which are only run on some targets. * gdb.base/watchpoint.exp: Various cleanups (make each test pass or fail, make test names unique, use new gdb_test convention regarding pattern, use gdb_test more, etc.). * gdb.base/bitfields.exp: Various cleanups (make each test pass or fail, make test names unique, etc.). Sat Apr 8 02:47:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/nodebug.c: Change return type of top and middle to short. * gdb.base/nodebug.exp: Remove xfails for ecoff systems, they are fixed by the recent mdebugread.c changes. Allow `short ()' as type for top and middle. Thu Apr 6 08:54:18 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/break.exp: Remove commented out if $usestubs {}. As nearly as I can tell, the whole thing was an accident in Stu's change of 24 Mar 1995 (logged in ../ChangeLog), in which he meant to replace a send/expect pair with gdb_test, but ended up only adding the gdb_test. My change of 24 Mar 1995 and Kung's change of 30 Mar 1995 took care of it, but left this vestigial comment which I am now nuking. Mon Apr 3 09:00:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/break.exp: Look for different line number for breakpoint at main depending on usestubs. Sun Apr 2 08:15:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/list.exp: Adjust some alternate expect patterns to match recent list0.c change. Add alternate expect pattern for output from `list default lines around main' for optimizing compilers. Sat Apr 1 07:23:22 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp: If nosignals is not set, set it to 0. Fri Mar 31 16:13:48 1995 Kung Hsu * config/slite-gdb.exp: Responds to load symbol table prompt. * gdb.base/break.exp: Adjust line number, fix rerun. * gdb.base/langs0.c: Add #ifdef usestubs. Thu Mar 30 15:36:55 1995 Kung Hsu * gdb.base/list.exp: Adjust line contents after adding new lines in list0.c. Also fix a syntax error. * lib/gdb.exp (gdb_run_cmd): Special handling for targets use stubs. * gdb.base/break.exp: ditto. * gdb.base/list.exp: ditto. * gdb.base/bitfields.c: Add #ifdef usestubs in main(). * gdb.base/run.c: ditto. * gdb.base/list0.c: ditto. * gdb.base/funcargs.c: ditto. Wed Mar 29 17:09:29 1995 Stu Grossman (grossman@cygnus.com) * testsuite/config/rom68k.exp (gdb_target_rom68k): Use $targetname, $serialport and $baud instead of hardwired variables. * testsuite/gdb.base/{sigall.exp signals.exp}: Skip these if the target doesn't support signals. Wed Mar 29 12:29:34 1995 Kung Hsu * lib/gdb.exp (runto_main): Fix regular expression bug, add return 1. Tue Mar 28 08:46:45 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/recurse.exp: Make test names unique. Change \\(+ to \\(. Don't rely on the value of an auto variable before it has been initialized. Use gdb_test more. Mon Mar 27 08:00:34 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp (default_gdb_version): A version number must start with a digit, but other than that contains all characters up to the first whitespace character. Sun Mar 26 13:19:32 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/commands.exp (breakpoint_command_test): New tests. Sat Mar 25 15:38:06 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.c++/*.exp: Warn if executable does not exist. The original reason for skipping the warning was that configure.in sometimes intentionally skipped building the executables but the tcl code had no way of knowing. That (a) was always bogus with respect to error handling, (b) is no longer true (right now there is no way to skip C++ tests). * gdb.c++/demangle.exp: Remove unused binfile and srcfile variables. Sat Mar 25 01:16:10 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/list.exp: Add expect patterns for output from SunPRO compiled executables. * gdb.base/whatis.exp: Allow leading `signed' for all v_signed_* types. Fri Mar 24 06:11:05 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/break.exp (test_next_with_recursion): Accept any line number (we are already testing that the correct source line text gets printed). * gdb.base/break.exp: Make one test if $usestubs. I'm not sure that is what is intended, but something needed to be done to get sunos4 native working again. * gdb.c++/misc.cc (main): Fix typo (#iffef -> #ifdef). * gdb.base/a1-selftest.exp (test_with_self): Remove comment which apparently went with a (very) old xfail. Fri Mar 24 13:41:09 1995 Kung Hsu * gdb.base/callfuncs.exp: call runto_main instead of runto main. runto_main is a proc in gdb.exp that will do 'step' for target use stubs. * gdb.base/exprs.exp: ditto. * gdb.base/interrupt.exp: ditto. * gdb.base/opaque.exp: ditto. * gdb.base/printcmds.exp: ditto. * gdb.base/ptype.exp: ditto. * gdb.base/scope.exp: ditto. * gdb.base/setvar.exp: ditto. * gdb.base/signals.exp: ditto. * gdb.base/twice.exp: ditto. * gdb.c++/classes.exp: ditto. * gdb.c++/inherit.exp: ditto. * gdb.c++/templates.exp: ditto. * gdb.base/break.exp: no run and hit main for stubs. Change line numbers for breakpoints and info breakpoint. * gdb.base/break.c: Add #ifdef usestubs for set_debug_traps() and breakpoint(). * gdb.base/callfuncs.c: ditto. * gdb.base/exprs: ditto. * gdb.base/interrupt.c: ditto. * gdb.base/opaque0.c: ditto. * gdb.base/printcmds.c: ditto. * gdb.base/ptype.c: ditto. * gdb.base/scope0.c: ditto. * gdb.base/setvar.c: ditto. * gdb.base/signals.c: ditto. * gdb.base/twice.c: ditto. * gdb.c++/misc.cc: ditto. * gdb.c++/templates.cc: ditto. Fri Mar 24 06:11:05 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * config/vx-gdb.exp, lib/gdb.exp: Regexp cleanups (\[(\] -> \\(, etc.). * gdb.base/a1-selftest.exp: Don't check for # followed by a digit somewhere between `read' and `main.c'. I'm pretty sure the pattern ".*#\[0-9\].*" was slowing down pattern matching a lot, and it isn't particularly useful. * gdb.base/scope.exp: Make test names unique. \[(\] -> \\(. Thu Mar 23 14:58:35 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/commands.exp (infrun_breakpoint_command_test): New test. Wed Mar 22 18:36:05 1995 Kung Hsu * config/mt-slite: add LIBS and -nostdlib. * config/slite-gdb.exp: add this new file to support sparclite target. Tue Mar 21 21:41:04 1995 Doug Evans * config/vx-gdb.exp (gdb_load): Update test of vxworks_ld return code. * gdb.base/a2-run.exp: Change argument to istarget from "*-*-vxworks" to "*-*-vxworks*". * gdb.base/{break.exp,default.exp,scope.exp}: Likewise. Tue Mar 21 17:08:47 1995 Kung Hsu * lib/gdb.exp: add proc runto_main, for targets that use stubs, this will not runto main but do a 'step' to step out of breakpoint(). * config/mt-slite: add -Dusestubs. Tue Mar 21 12:14:12 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/printcmds.exp (test_artificial_arrays): Send ^V@ instead of just @. * gdb.base/signals.exp: Add test for "handle all print". * TODO: Remove "handle all print". Also remove item about checking copyright date (I don't like the idea of a spurious FAIL based on when we run the tests). * gdb.base/recurse.exp: Enable test for SunOS4. xfail one test for SunOS4 (reason for failure not investigated). Remove redundant test for $binfile. * gdb.base/nodebug.c (array_index): Call malloc. * gdb.base/{corefile.exp,default.exp}: Make names of "up" tests unique. Mon Mar 20 10:08:17 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/recurse.exp: Update gdb_test invocation to use new conventions and slightly simplify the matching regexp. Fri Mar 17 05:43:28 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/break.exp: Update gdb_test invocation to use new convention. * lib/gdb.exp: If noargs is not set, set it to 0. * gdb.base/nodebug.exp: Comment out redundant test. Make name of tests unique. * lib/gdb.exp: Skip CHILL for AIX and Solaris. Thu Mar 16 16:27:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/nodebug.exp: It is OK if GDB thinks top and middle have one argument of type "". Wed Mar 15 15:54:56 1995 Stu Grossman (grossman@cygnus.com) * config/rom68k.exp: New file to support Motorola IDP board. * gdb.base/a2-run.exp: Skip this file if noargs is set. * gdb.base/break.c: Change things around so that this program doesn't depend upon args. This is necessary to make remote targets work (in general, they can't take args). * gdb.base/break.exp: Don't try to send args to program. Don't expect output. Also, replace lots of code with gdb_test. Wed Mar 15 04:11:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/printcmds.exp (test_character_literals_accepted): Test printing of '\'' (which is what the comment says we are testing, even though we were not), not '''. (test_integer_literals_rejected): Test that printing ''' is an error. * gdb.fortran/exprs.exp, gdb.fortran/types.exp, gdb.chill/chexp.exp, gdb.base/printcmds.exp, gdb.c++/cplusfuncs.exp, gdb.chill/callch.exp, gdb.chill/misc.exp, gdb.chill/pr-6292.exp, gdb.chill/string.exp, gdb.chill/tuples.exp: Use gdb_test not test_print_accept. * lib/gdb.exp: Remove test_print_accept. * gdb.base/signals.exp (signal_tests_1): Make pass message consistent with fail message. * gdb.base/whatis.exp: Remove xfails for printing char vs. unsigned char; the bug (PR 1821) is fixed. * gdb.base/scope.exp: Remove xfails for PRs 1843 and 1868. * gdb.base/scope.exp (test_at_localscopes): Call pass for successful tests--makes xfailing them work right. Tue Mar 14 07:39:19 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp (gdb_test): Between $pattern and $prompt, expect only \r\n, not .*. The test can pass .* as the last thing in $pattern if that is what it wants. In addition to providing this flexibility, this change should speed up pattern matching in cases where the pattern already ended with .* (there were a number of them). This change also helps catch bad patterns--in the old scheme the typo "char \*" instead of "char \\*" would pass. Now it is caught. * Many .exp files: Update callers. * gdb.base/funcargs.exp: Replace \[(\]+ with \\(. The latter is clearer and does not spuriously match multiple ('s. Likewise for ) and *. * gdb.base/nodebug.exp: Test ability to call a function and pass it a string (even with no debugging info). * gdb.base/printcmds.exp (test_integer_literals_rejected): Change "p '\'", which is the same as "p ''" once tcl gets done with quoting, to "p '\\'", which I suspect is what is intended (one backslash gets sent to GDB). * gdb.base/printcmds.exp (test_artificial_arrays): New tests. Fri Mar 10 13:31:46 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/a1-selftest.exp: Remove xfail for solaris. The bug (PR 1817) was fixed literally years ago. Fri Mar 10 02:49:40 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/funcargs.exp (call_after_alloca): Remove `next' test, it causes stepping out of call_after_alloca_subr with optimizing compilers. (localvars_in_indirect_call): Consume GDB prompt if `finish' fails. * gdb.c++/templates.exp: Source templ-info.exp only if the templates executable exists. * gdb.c++/misc.cc (class Contains_static_instance, class Contains_nested_static_instance), gdb.c++/classes.exp (test_static_members): Test printing of a class that contains a static instance of the class. Thu Mar 9 11:43:55 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/langs2.c (cppsub_): Don't prototype. * gdb.base/langs2.cxx (cppsub_): Fix prototype (cosmetic value only, I believe). Wed Mar 8 10:29:33 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp (skip_chill_tests): New procedure. * gdb.base/signals.exp (signal_tests_1): xfail for irix. Mon Mar 6 10:44:06 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.exp: Delete redundant ".*" at the beginning of each expect pattern. Cuts runtime from 12 to about 4 seconds. Thu Mar 2 05:31:34 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/langs.exp: Don't insist that foo__Fi be demangled. * gdb.disasm/hppa.exp (all_fpu_comparison_tests): Only disassemble 8, not 16, instructions for part 4. * config/vx-gdb.exp (gdb_start): Use \030, not \CX. tcl doesn't support the latter anymore. * gdb.base/Makefile.in: Try compiling callfuncs.c, if that fails try -DNO_PROTOTYPES. * gdb.base/callfuncs.c: Control use of prototypes based on NO_PROTOTYPES, not __STDC__. * gdb.base/callfuncs.exp (do_function_calls): xfail one of the t_float_values2 tests if prototypes in use. * gdb.base/callfuncs.c (t_float_values, t_float_values2, t_double_values): When checking differences against DELTA, check that difference is within the range (-DELTA,DELTA), not just (-infinity,DELTA). Tue Feb 28 16:28:54 1995 Kung Hsu * config/mips-gdb.exp (gdb_load): In every test case, we need to do 'file' command firts, then 'target', then 'load', this is due to gdb target set up. * config/mips-gdb.exp: Fix a couple regular exp bugs. Thu Feb 23 17:44:55 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.s (fmemLRbug_tests): Add tests for the indexing FP load/store variants. * gdb.disasm/hppa.exp (fmemLRbug_tests): Test new variants. Wed Feb 22 18:29:08 1995 Jim Kingdon * gdb.base/term.exp: Do not give a warning if not native, it is not an abnormal condition. Tue Feb 21 13:08:47 1995 Jim Kingdon * gdb.base/ptype.exp: Accept char[0] as well as char[] for "ptype t_char_array". Sun Feb 19 13:10:06 1995 Jim Kingdon * lib/gdb.exp (default_gdb_version): Pass GDBFLAGS to gdb when we are getting the version number. * gdb.base/{a1-selftest.exp,corefile.exp}: Do not give a warning if not native, it is not an abnormal condition. Thu Feb 16 15:56:56 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp: Just use "file exists", rather than undocumented dejagnu procedure "findfile". Thu Feb 16 10:30:24 1995 J.T. Conklin * config/mt-vxworks (CFLAGS): Set to -g -Dvxworks. (LDFLAGS): Set to -Xlinker -Ur. * Makefile.in, gdb.{base,c++,chill}/Makefile.in (GDB, GDBFLAGS): Removed, these values are set by lib/gdb.exp. * lib/gdb.exp: If GDBFLAGS is unset, set it to -nx. Wed Feb 15 14:23:28 1995 J.T. Conklin * config/vx-gdb.exp (spawn_vxgdb): Use default_gdb_start instead of replicating gdb startup code. * config/mt-vxworks (LDFLAGS): Set to -r. (CFLAGS_FOR_TARGET): Removed. * config/vx-gdb.exp: always set prompt; gdb.exp sets it to (gdb) and gdb for vxworks uses (vxgdb). * Makefile.in, gdb.{base,c++,chill}/Makefile.in (GDB): If a gdb executable is not in the tree and host != target, use sed and program_transform_name to determine the gdb name used by the target. * configure.in, gdb.{base,c++,chill}/configure.in: changed so *-*-vxworks* matches vxworks and *-*-netware* matches NetWare. Sun Feb 12 08:11:58 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/{callfuncs.exp,callfuncs.c}: Add tests for passing floats, chars, and shorts where there are ANSI-style function definitions. * gdb.base/langs.exp, gdb.base/langs*: New test. * gdb.base/Makefile.in: Build it. * TODO: Remove item about checking that C names don't get C++ demangling applied; this test tests it. Thu Feb 9 12:43:56 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.stabs/weird.exp: Remove "Haven't examined" comment which went with the const70 xfail. The xfail went away a year ago. * gdb.base/signals.exp: Rename a bunch of tests to give unique names. * gdb.base/corefile.exp: Give backtrace test unique name. xfail for hp300. * gdb.base/interrupt.exp: Also xfail hpux (for hp300). * gdb.base/a1-selftest.exp: Don't run on hp300. Sat Feb 4 15:04:32 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in (site.exp): Set host_alias and target_alias as well as host_triplet and target_triplet. Wed Feb 1 08:03:48 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/a1-selftest.exp: Invoke stty before starting inferior. * gdb.base/nodebug.exp: Add xfails for ultrix and irix5 (same places as other ecoff systems). * gdb.base/a1-selftest.exp (test_with_self): Don't invoke stty on ultrix. Mon Jan 30 11:44:52 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/nodebug.c (inner): Use variables so AIX linker doesn't remove them. * gdb.base/nodebug.exp: Accept "function" in addition to "text variable and "variable" in addition to "data variable". * gdb.base/nodebug.exp: xfail datalocal and bsslocal tests for AIX. * gdb.base/list.exp (test_forward_search): Set listsize to 4 not 2. * gdb.base/list1.c (long_line): Add additional statement at start of function. * gdb.base/list.exp (test_forward_search): Update line number to reflect new statement. Sun Jan 29 13:34:25 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/signals.exp: Reinitialize searched source directories after gdb_start call. Sat Jan 28 01:34:44 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/Makefile.in (clean): Delete "errs" file. * gdb.stabs/Makefile.in: Likewise. * gdb.disasm/hppa.exp (all_fpu_comparison_tests): Revert last change. Instead split the tests into smaller pieces. * gdb.disasm/hppa.s: Corresponding changes. Fri Jan 27 09:24:51 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/a1-selftest.exp (test_with_self), gdb.base/interrupt.exp: Quote ^C when passing it to stty. For some shells ^ is a pipe. * gdb.base/funcargs.exp: Modify many tests so that every test either passes or fails. Make some test names unique. Thu Jan 26 19:20:34 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/a1-selftest.exp (test_with_self), gdb.base/interrupt.exp: Call stty to set interrupt character. * gdb.disasm/hppa.mt (hppa), gdb.stabs/hppa.mt (weird.o): Check for HP assembler versus GNU assembler based on actual behavior of $(CC), rather than assuming that $(AS) is always the GNU assembler. * TODO: Suggest a few more stepping tests. Wed Jan 25 14:52:41 1995 Stan Shebs * gdb.base/default.exp: xfail no-stack backtraces for h8300, restart GDB for h8300 after a continue. (return): Add pattern to match a29k-udi behavior. * gdb.base/nodebug.exp: Remove obsolete comment. * gdb.base/regs.exp: New file, testing of register displays. * gdb.base/return.exp: Fix typo in reference to $objdir. * gdb.base/whatis.exp: Always start with a fresh GDB. Wed Jan 25 11:12:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.disasm/hppa.exp (all_fpu_comparison_tests): Set timeout higher, these tests generate a lot of output. Tue Jan 24 07:58:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp (gdb_test): Remove catch from around the send. The code following the catch silently ignored some errors; without the catch they should be thrown like any other tcl error. Also, the catch used "" instead of {} which meant all the callers who wanted to include one of the characters "[]$ had to quote it an extra time. * gdb.base/{callfuncs.exp,commands.exp,gdbvars.exp,printcmds.exp, ptype.exp,signals.exp,watchpoint.exp}, gdb.c++/{cplusfuncs.exp, demangle.exp}, gdb.chill/chexp.exp, gdb.fortran/exprs.exp: Remove extra quoting. Mon Jan 23 21:57:54 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/commands.exp: Make test names unique; every test either passes or fails. Update some comments. * gdb.disasm/hppa.exp (do_system_control_tests): Update. Sat Jan 21 15:34:52 1995 Jim Kingdon (kingdon@lioth.cygnus.com) The following fixes a FAIL caused by the fact that the alpha stabs configuration didn't use the ".if alpha" code in weird.def. * gdb.stabs/weird.def (v_comb): Use type attribute to specify 32 bit pointer, so the 32 bit version works even on the alpha. * gdb.stabs/{alpha.mt,ecoff.mt,aout.sed,hppa.sed,xcoff.sed,weird.def}: Remove the stuff which allowed us to have separate versions for alpha and everything else. * gdb.c++/cplusfuncs.exp (test_lookup_operator_functions): Fix regexp which "info func operator\[\](" is supposed to match. Fix string to send to GDB. Note that GDB still doesn't work right. Add a new test for "info func .perator\[\](" which GDB does handle correctly. * gdb.base/nodebug.exp: xfail most of the new tests for ecoff systems. Fri Jan 20 12:14:23 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.c++/classes.exp, gdb.c++/cplusfuncs.exp, gdb.c++/inherit.exp, gdb.c++/templates.exp, gdb.c++/virtfunc.exp, gdb.fortran/exprs.exp, gdb.fortran/types.exp, gdb.chill/chexp.exp, gdb.base/printcmds.exp: Remove passcount, failcount, etc., stuff; it makes the tests harder to understand and confuses test-o-matic. The preferred style is that each test provides a PASS or a FAIL, and has a unique message (e.g. "continue #54" not just "continue") which is the same for the pass and the fail. * gdb.fortran/exprs.exp, gdb.fortran/types.exp, gdb.chill/chexp.exp: Move test_print_accept and test_print_reject to lib/gdb.exp. * gdb.base/printcmds.exp: Use test_print_accept. Remove prt_accept which was basically the same thing. Likewise for test_print_reject and prt_reject. * lib/gdb.exp (test_print_reject): Add some more error message patterns to match from the former printcmds.exp (prt_reject). * gdb.c++/classes.exp, gdb.base/scope.exp: Remove spurious xfails. One defect of the passcount stuff is that some of it failed to report XPASS where appropriate. * gdb.c++/cplusfuncs.exp (print_addr_of): No longer accept extra stuff before and after arg in expected pattern. (test_paddr_operator_functions): Re-do test without print_addr_of; this is the only test which seems to want extra stuff there. Tue Jan 17 10:47:53 1995 Jim Kingdon * gdb.base/nodebug.exp: Update new tests to reflect improved wording of gdb output. * gdb.base/nodebug.exp: Add tests to check that "print", "whatis" and "ptype" work on variables in files compiled without -g. Replaces commented out "maint print msymbol" tests. Mon Jan 16 12:13:28 1995 Jim Kingdon * gdb.base/setvar.c (dummy): Call malloc. * gdb.stabs/aout.sed: Enclose comments within a sed command to avoid losing with the irix4 sed. * gdb.base/sigall.exp (test_one_sig): Add xfail for "get signal ALRM" on irix4. Sun Jan 15 21:58:26 1995 Jim Kingdon * TODO: Remove items about corefile.exp testing new exec-file and backtrace; both are now done. Add items about printing enums. Sat Jan 14 11:25:28 1995 Jim Kingdon * gdb.base/sigall.exp (test_one_sig): Attempt to recover if "get signal $thissig" test fails. * gdb.base/setvar.exp: Check for and reject crazy expected type hacks. Thu Jan 12 01:14:53 1995 Jim Kingdon * gdb.base/sigall.c (gen_*): Pass argument to handle_* to avoid compiler warning with dec alpha compiler. * gdb.base/commands.exp (if_while_breakpoint_command_test): Remove extra \n from gdb_test call (this explains why the prompt test that I removed yesterday was there). (user_defined_command_test): Remove extra \n and prompt test. * gdb.base/sigall.c: If SIGABRT == SIGLOST, just act as if SIGLOST doesn't exist. Likewise if SIGIO == SIGPOLL, pretend SIGPOLL doesn't exist. * gdb.base/sigall.exp: Remove special handling for SIGIO and SIGPOLL. Also remove alpha workaround, which turns out to be because SIGABRT == SIGLOST. * gdb.base/sigall.exp: Add workaround for alpha weirdness. * gdb.base/help.exp: Don't test "help show". Wed Jan 11 14:37:04 1995 Jim Kingdon * gdb.base/commands.exp: Call gdb_exit and gdb_start so that "set print address" is on. * gdb.base/commands.exp (if_while_breakpoint_command_test): Don't pass prompt to gdb_test; gdb_test already looks for the prompt. * gdb.base/help.exp: Replace most of docstring for "define" with ".*". * gdb.base/a1-selftest.exp: Don't test "maint dump-me". That test was a vestige of the manual TESTSTRATEGY, and the purpose of it was to make sure that gdb can read a core file. But (a) the "read the corefile" part didn't make it to a1-selftest.exp, we just delete the corefile after creating it, and (b) we test reading corefiles in corefile.exp anyway. Also, this test left around a xgdb process on Solaris. * gdb.base/corefile.exp: Also test backtrace. Wed Jan 11 00:14:40 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/commands.exp: Test a simple user defined command with arguments and if/while statements; verify the full user command is printed by "show user". * gdb.base/commands.exp: Test if/while commands as part of a breakpoint command list; verify they appear in breakpoint information. Wed Jan 11 00:47:58 1995 Jim Kingdon * gdb.base/sigall.c (gen_FPE): Generate SIGFPE with kill() rather than by dividing by zero. Tue Jan 10 21:38:05 1995 Jeff Law (law@snake.cs.utah.edu) * gdb.base/watchpoint.exp: hppa*-*-*bsd* no longer has problems performing an inferior call with watchpoints enabled. * gdb.base/watchpoint.c (main): Delete second unnecessary read call. Tue Jan 10 18:42:07 1995 Jim Kingdon * gdb.stabs/weird.exp: Allow spaces followed by backspaces in echo of "file" command. * gdb.c++/classes.exp (test_ptype_class_objects, ptype class Foo): Add additional pattern for when "int operator int(void);" appears in a different order. Mon Jan 9 16:22:46 1995 Jim Kingdon * gdb.base/signals.exp: Call gdb_exit and gdb_start. * gdb.base/help.exp: Replace most of docstrings for "info signals" and "signal" with ".*". Wed Jan 4 11:35:19 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add note about "handle all nostop". * gdb.base/{sigall.c, sigall.exp}: New test. * gdb.base/Makefile.in: Add it. Thu Jan 5 17:34:03 1995 Stan Shebs * lib/gdb.exp, gdb.base/corefile.exp: Supply -nw as argument when invoking GDB, suppresses any windowing interface. Mon Jan 2 17:40:21 1995 Stan Shebs * config/sim-gdb: New file, simulator testing support. Wed Dec 28 12:21:50 1994 Jeff Law (law@snake.cs.utah.edu) * gdb.base/interrupt.exp: Test calling func1 twice. Wed Dec 21 12:51:37 1994 Jim Kingdon * gdb.base/list.exp (test_forward_search): Set timeout higher when we'll be getting lots of output from gdb. * gdb.base/a1-selftest.exp: Move code that was inside expect -re "init_malloc" to after the expect statement. Run it if that regexp is taken, but also for two others which happen if source cannot be found. Tue Dec 20 12:35:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/printcmds.exp: New test, for printing register before program is running. Mon Dec 19 00:32:55 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/list.exp: Correct some alternate expect patterns to reflect changes in list1.c. Sat Dec 17 14:20:03 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add item regarding large frames. * gdb.base/{funcargs.exp, funcargs.c} (call_after_alloca): New test. * TODO: Remove item about enabling return.exp; it is enabled. Suggest a few more "return" tests. Sat Dec 17 02:33:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.c++/misc.cc, gdb.c++/inherit.exp: Add testcases for anonymous unions. Tue Dec 13 11:26:00 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.chill/Makefile.in: Put all rule before rules for pr-4975.o and pr-5646.o, so "make" is the same as "make all", not "make pr-4975.o". Wed Dec 7 19:02:02 1994 Stan Shebs * gdb.base/list.exp: Adjust expectations to reflect changes in list1.c. (test_forward_search): New test proc. * gdb.base/list1.c (long_line): New function, has long source line. Thu Dec 1 23:14:49 1994 Stan Shebs * gdb.base/a1-selftest.exp: Change initial stepping to know about additional line of code that was added. Wed Nov 30 19:43:14 1994 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.s: Break the large branching tests into smaller tests so as not to overflow expect's input buffers. * gdb.disasm/hppa.exp: Corresponding changes. Fri Nov 25 13:37:10 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) Beginnings of template debugging tests. * gdb.c++/templ-info.cc: New file to test for template debugging capability of the compiler. * gdb.c++/Makefile.in: Add rule to build templ-info.exp from templ-info.cc. * gdb.c++/templates.cc: Add explicit template instantiations to enable compiling with -fno-implicit-templates. Add destructor and 'value' method to T5 class for template tests. * gdb.c++/templates.exp: Add testcases for printing of template types, setting breakpoints on template methods and calling a template method. Sat Nov 5 00:20:17 1994 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.exp (branch_tests): Allow any symbol as the branch target since some assemblers (gas-2.5) may emit a relocation for the branch instead of resolving it in the assembler. Sat Oct 29 02:40:40 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/a1-selftest.exp: Remove RS/6000 xfail for backtrace through signal handler. Fri Oct 21 11:10:16 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * configure.in (*-*-netware): Use config/mt-netware. * config/mt-netware: New file. * config/mt-i386-netware: Removed, separate configs for different netware architectures are no longer needed now that we have --with-headers. Sat Oct 15 03:43:00 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/exprs.exp: Remove xfail for alpha, it is fixed by the recent changes to use ANSI C arithmetic conversions. Sun Oct 9 07:44:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/corefile.exp: Add (xfail'd) test for reinit_frame_cache bug involving using inferior_pid to figure out whether to select a frame. Wed Sep 28 23:12:02 1994 Jeff Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.exp: Change arg[0..3] to r[26..23] to match the current disassembler output. Fri Sep 16 11:42:41 1994 Stan Shebs (shebs@andros.cygnus.com) * gdb.fortran/exprs.exp: Expect VOID instead of void. * gdb.fortran/types.exp: Escape the expected '*'s in Fortran types, expect "int" as type of integer values (for now). Wed Sep 7 23:33:51 1994 Jeff Law (law@snake.cs.utah.edu) * gdb.base/commands.exp: New tests for if/while commands. Tue Sep 6 13:16:11 1994 Per Bothner (bothner@kalessin.cygnus.com) * lib/gdb.exp (runto): Replace sub-pattern for hex value by .*, since hex values have different syntax in Chill mode. Tue Sep 6 02:15:51 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.c++/demangle.exp (test_arm_style_demangling): Remove linefeed from expect pattern for repeated types with indices > 9. Mon Aug 29 14:20:44 1994 Stan Shebs (shebs@andros.cygnus.com) First part of Fortran test suite. * gdb.fortran: New directory. * gdb.fortran/exprs.exp, gdb.fortran/types.exp: New files. Sat Aug 27 23:32:43 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/default.exp: Update expect pattern for load command without arguments. Wed Aug 24 13:15:02 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * configure.in: Change i386 to i[345]86. * gdb.base/configure.in: Likewise. * gdb.c++/configure.in: Likewise. * gdb.chill/configure.in: Likewise. Tue Aug 23 19:14:06 1994 Stan Shebs (shebs@andros.cygnus.com) * lib/gdb.exp (gdb_run_cmd): Move comment out from between expect patterns, since that is not a valid context for comments. Fri Aug 19 15:07:30 1994 Kung Hsu (kung@mexican.cygnus.com) * gdb.c++/demangle.exp (test_arm_style_demangling): Add tests for repeated types and repeated types with indices > 9. Tue Aug 16 15:57:52 1994 Stan Shebs (shebs@andros.cygnus.com) * gdb.base/printcmds.exp: Remove all the a29k XFAILs tagged with 2417; old bug has been fixed. Fri Aug 12 19:35:41 1994 Jeff Law (law@snake.cs.utah.edu) * gdb.base/interrupt.exp: When trying to wake up the inferior, send the newline ourselves instead of assuming gdb_test will do so when passed an empty input string. * gdb.stabs/hppa.mt: Use $(AS), not $(CC) to assemble the stabs testcode. Fri Aug 5 17:01:07 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * lib/gdb.exp (gdb_test): Don't send anything if the first argument is an empty string. This makes cases where we want to match output that is already in expect's buffers (for example, matching a breakpoint after gdb_run_cmd has been called) work reliably. Tue Aug 2 10:24:08 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * config/netware.exp: New file. Thu Jul 28 12:54:07 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * config/mt-slite (LDFLAGS): If using the newlib in the tree, set the -B and -L prefixes so we can find the debugging stub. * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Use newlib if it is there and we are using the gcc from the tree. * gdb.base/types.c: Removed. * gdb.base/configure.in: Look for makefile fragments in ../config. Recognize i386-*-netware. * gdb.c++/configure.in: Likewise. Mon Jul 25 23:48:50 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/corefile.exp: Change `else if' to `elseif', which is the correct TCL syntax. Mon Jul 25 15:35:56 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * gdb.base/opaque.exp: use runto instead of messing around with breakpoints. Simplify by using gdb_test. * gdb.base/bitfields.exp: restart between tests on netware targets because breakpoints aren't relocated after target death. Run processes to completion. * gdb.base/{opaque,watchpoint}.exp: Use gdb_run_cmd. Sun Jul 24 09:55:51 1994 Fred Fish (fnf@cygnus.com) * Makefile.in: Remove extra tabs that confuse some versions of "make". Use the newly built gdb to test with by default, rather than the first one in the tester's search path. Sat Jul 23 15:05:47 1994 Stan Shebs (shebs@andros.cygnus.com) * gdb.base/whatis.exp (v_signed_short_array): Fix a typo. * gdb.base/help.exp: Update expected add-symbol-file, ignore, and condition help. Tue Jul 19 10:26:32 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * lib/gdb.exp (runto): Rewrite in terms of gdb_run_cmd. * lib/gdb.exp (gdb_run_cmd): New function, used to start program running. * gdb.base/bitfields.exp: Use gdb_run_cmd to start program. * gdb.base/funcargs.exp: Likewise. * gdb.base/bitfields.exp: Simplify by using gdb_test. * gdb.base/funcargs.exp: Likewise. * lib/gdb.exp (gdb_test): if match times out, don't call fail if message is "". Mon Jul 18 12:18:07 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * gdb.base/{a2-run,callfuncs,funcargs,interrupt,mips_pro,nodebug, return,signals,twice}.exp: Handle non-existant binaries consistantly. * gdb.base/corefile.exp: Execute coremaker to generate core dump. * gdb.base/Makefile.in: Don't try to generate a core dump, we might testing a cross development system. Thu Jul 14 18:13:56 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * Makefile.in (RUNTEST_FOR_TARGET): Fix relative pathname, the runtest script is relative to ${srcdir}, not ${rootdir}. Thu Jul 14 14:56:59 1994 Stan Shebs (shebs@andros.cygnus.com) * gdb.base/signals.exp: Allow for optionality of breakpoint address. Thu Jul 14 11:21:27 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.base/{ptype.exp,ptype.c}: Add t_char_array test. Tue Jul 12 12:22:32 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * gdb.c++/cplusfuncs.cc: Include , not , for size_t definition. * gdb.c++/templates.cc: Likewise * config/mt-i386-netware: New file. * gdb.base/interrupt.c: Do not test if errno == EINTR if it's not defined. * gdb.base/Makefile.in: Added support for systems that name core files by appending "core" to the program name. * gdb.base/a1-selftest.exp: Likewise. Mon Jul 11 23:59:18 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/return.exp: Add comment and message for `return double' test failure on Sparc Solaris. Mon Jul 4 12:10:48 1994 Stan Shebs (shebs@andros.cygnus.com) * lib/gdb.exp (runto): Allow for optionality of breakpoint address. Wed Jun 29 00:26:17 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.c++/misc.cc: Instantiate classes to inhibit the compiler from optimizing them away. * gdb.c++/classes.exp, gdb.c++/inherit.exp: Update ptype expect patterns to include default constructors and assignment operators, to match gcc versions beyond 2.5.8. Accept any cplus demangling character in the output of the virtual base pointer. Fri Jun 24 08:15:42 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.c++/cplusfuncs.exp: Use string_to_regexp and a regular expression match in print_addr_of to avoid unintented matches. * gdb.c++/virtfunc.exp: Accept alternate ptype output of g++ versions up to 2.5.8. Mon Jun 20 23:54:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.base/list.exp: Tweak alternate pattern for listing of an included file to run under newer versions of expect. * gdb.c++/demangle.exp: Add spaces to the expect patterns between consecutive >'s in templates to accomodate recent cplus-dem.c change. Remove xfail for the virtual table of BDDHookV. Sat Jun 18 12:51:34 1994 Stan Shebs (shebs@andros.cygnus.com) * lib/gdb.exp (string_to_regexp): Set a default result. (default_gdb_start): Fix misleading message. Wed Jun 15 12:10:10 1994 Stan Shebs (shebs@andros.cygnus.com) * config/mt-a29k-udi, config/mt-i960-nindy, config/mt-sparc-aout: Remove all CC, etc definitions. * config/mt-hpux: New file. * config/mt-mips-ecoff (CFLAGS_FOR_TARGET): Remove: (CFLAGS, LDFLAGS): Define. * config/mt-slite (CFLAGS_FOR_TARGET): Change to LDFLAGS. * Makefile.in (site.exp): Don't insert host_os, etc. (just-check): Just use RUNTEST with RUNTESTFLAGS only. (distclean): Check existence of subdir. * gdb.base/configure.in (hppa*-*-hpux*): Recognize. * gdb.base/Makefile.in: General cleanup and simplification. Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions to build executables. Use default rule to build .o files. (EXPECT, RUNTEST, CC): Fix relative pathname. (site.exp): Don't insert host_os, etc. * gdb.base/signals.c (main): Don't call signal unless SIGALRM and/or SIGUSR1 defined. * gdb.base/watchpoint.c: Don't include stdio.h a second time. * gdb.c++/Makefile.in: General cleanup and simplification. Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions (CFLAGS): Remove. (EXPECT, RUNTEST_FOR_TARGET, CXX): Fix relative pathname. Fri Jun 10 10:55:09 1994 Jeff Law (law@snake.cs.utah.edu) * gdb.base/recurse.exp: Misc changes to get tests running again after Kung's changes to the watchpoint code. * gdb.base/watchpoint.exp: Likewise. Thu Jun 9 15:16:55 1994 Per Bothner (bothner@kalessin.cygnus.com) * lib/gdb.exp (string_to_regexp): Convert {\} also. Wed Jun 8 12:12:17 1994 Stan Shebs (shebs@andros.cygnus.com) * config/udi-gdb.exp, config/unix-gdb.exp: Call default_gdb_start. * lib/gdb.exp (default_gdb_start): Define. * gdb.base/bitfields.exp, gdb.base/break.exp, gdb.base/exprs.exp, gdb.base/funcargs.exp, gdb.base/opaque.exp, gdb.base/printcmds.exp, gdb.base/ptype.exp, gdb.base/recurse.exp, gdb.base/scope.exp, gdb.base/setvar.exp, gdb.base/watchpoint.exp, gdb.c++/classes.exp, gdb.c++/misc.exp, gdb.c++/virtfunc.exp: Don't call gdb_target_udi in between tests. Tue Jun 7 08:30:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.c++/demangle.exp: Use gdb_test_exact, rather than demangle (which was basically just a local version of the same thing). In addition to avoiding duplication, gdb_test_exact is faster. * lib/gdb.exp (gdb_test_exact): Fix typo. * lib/gdb.exp (delete_breakpoints): If there were no breakpoints, don't give an error. * gdb.base/term.exp: Call delete_breakpoints before starting. * gdb.base/Makefile.in (EXECUTABLES): Remove t10. (t10): Add comment. Mon Jun 6 18:26:50 1994 Stan Shebs (shebs@andros.cygnus.com) Reorganization of the GDB Test Suite. * gdb.base: New directory, contains all the basic tests. * gdb.c++: New directory, tests specific to C++. * gdb.chill: New directory, tests specific to Chill. * gdb.t00, gdb.t01, gdb.t02, gdb.t03, gdb.t04, gdb.t05, gdb.t06, gdb.t07, gdb.t08, gdb.t09, gdb.t10, gdb.t11, gdb.t12, gdb.t13, gdb.t15, gdb.t16, gdb.t17, gdb.t20, gdb.t21, gdb.t22, gdb.t23, gdb.t24, gdb.t30, gdb.t31: Removed directories, contents moved into appropriate new directories (t00-t17 to base, t20-t23 to c++, t30-31 to chill). * */gdbme.*: Rename to match appropriate expect scripts. * gdb.base/bitfields.c, gdb.base/break.c, gdb.base/callfuncs.c, gdb.base/coremaker.c, gdb.base/exprs.c, gdb.base/funcargs.c, gdb.base/interrupt.c, gdb.base/list0.c, gdb.base/list0.h, gdb.base/list1.c, gdb.base/mips_pro.c, gdb.base/nodebug.c, gdb.base/opaque-info.c, gdb.base/opaque0.c, gdb.base/opaque1.c, gdb.base/printcmds.c, gdb.base/ptype.c, gdb.base/recurse.c, gdb.base/return.c, gdb.base/run.c, gdb.base/scope0.c, gdb.base/scope1.c, gdb.base/setvar.c, gdb.base/signals.c, gdb.base/types.c, gdb.base/twice.c, gdb.base/watchpoint.c, gdb.base/whatis-info.c, gdb.base/whatis.c: New names of C files. * gdb.c++/cplusfuncs.cc, gdb.c++/templates.cc, gdb.c++/misc.cc, gdb.c++/virtfunc.cc: New names of C++ files. * gdb.chill/chillvars.ch: New name of Chill file. * gdb.base/configure.in, gdb.c++/configure.in, gdb.chill/configure.in: Merge in contents of gdb.t*/configure.in. * gdb.base/Makefile.in, gdb.c++/Makefile.in, gdb.chill/Makefile.in: Merge in contents of gdb.t*/Makefile.in. * configure.in (configdirs): Update to reflect directory changes. (target_abbrev): No longer define for any configuration. * Makefile.in: Cosmetic improvements to header comments. Fri Jun 3 18:56:06 1994 Per Bothner (bothner@kalessin.cygnus.com) Various changes to gdb.t31: * Makefile.in (gdbme.o): Compile with -fspecial_UC. * gdbme.ch: Make all key-words and predefineds be upper-case. * chillvars.exp: Expect key-words and predefinds in upper-case. * chillvars.exp: Use gdb_test_exact many places. Change expected output for arrays (which now includes index labels). * pr-5020.exp, gdme.ch (module PR_5020): New test, for PR-5020. Thu Jun 2 16:02:41 1994 Per Bothner (bothner@kalessin.cygnus.com) * lib/gdb.exp (string_to_regexp, gdb_test_exact): New procedures. * Makefile.in (CHILL_LIB): Remove bogus redundant definitions. Sun May 29 22:31:42 1994 Per Bothner (bothner@kalessin.cygnus.com) * Makefile.in: Fix bit-rot in definitions of CHILL, CHILL_FOR_TARGET and Chill_LIB. * gdb.t31/gdbme.ch: Fix syntax of nested array tuples. * gdb.t31/Makefile.in: Add definitions for CHILLFLAGS, CHILL, and CHILL_LIB. Sat May 21 10:05:08 1994 Bill Cox (bill@rtl.cygnus.com) * Revert the previous changes. Please see Rob's directory /lisa/test/rob/progressive/gdb/testsuite for these fixes. Thu May 19 12:51:00 1994 Bill Cox (bill@rtl.cygnus.com) * Makefile.in, configure.in, config/mips-gdb.exp, config/mt-a29k-udi, config/mt-i386-aout, config/mt-i960-nindy, config/mt-sparc-aout, config/udi-gdb.exp, config/unix-gdb.exp, config/unknown.exp, gdb.t00/default.exp, gdb.t00/help.exp,, gdb.t00/teststrategy.exp, gdb.t01/Makefile.in, gdb.t02/Makefile.in, gdb.t02/whatis.exp, gdb.t03/Makefile.in, gdb.t03/gdbme.c, gdb.t04/Makefile.in, gdb.t05/Makefile.in, gdb.t06/Makefile.in, gdb.t06/break.exp, gdb.t06/signals.c, gdb.t06/signals.exp, gdb.t08/Makefile.in, gdb.t08/opaque.exp, gdb.t09/Makefile.in, gdb.t10/Makefile.in, gdb.t11/Makefile.in, gdb.t12/Makefile.in, gdb.t13/Makefile.in, gdb.t15/Makefile.in, gdb.t15/funcargs.exp, gdb.t15/gdbme.c, gdb.t15/return.exp, gdb.t16/Makefile.in, gdb.t17/Makefile.in, gdb.t17/callfuncs.exp, gdb.t17/gdbme.c, gdb.t20/Makefile.in, gdb.t21/Makefile.in, gdb.t21/cplusfuncs.exp, gdb.t22/Makefile.in, gdb.t22/virtfunc.exp, gdb.t23/Makefile.in, gdb.t24/demangle.exp, lib/gdb.exp: Check in Rob's testing changes from 94Q1. Wed May 18 17:04:03 1994 Bill Cox (bill@rtl.cygnus.com), * config/mt-lynx, config/mt-m68k, config/mt-mips-ecoff, config/mt-slite, config/mt-unix, config/mt-vxworks: Add Rob's new testing fragments. Tue May 17 15:04:14 1994 Bill Cox (bill@rtl.cygnus.com) * config/mips-gdb.exp, config/udi-gdb.exp, config/vx-gdb.exp, lib/gdb.exp: Replace error proc calls with perror. Mon May 16 19:00:50 1994 Stan Shebs (shebs@andros.cygnus.com) * gdb.t00/teststrategy.exp: Reorder so that AIX gdb can print the version also, match on casted version strings, and match on gdb startup case where the line numbers might be messed up. Fri May 13 18:00:27 1994 Bill Cox (bill@rtl.cygnus.com) * config/mt-i960-vx (LDFLAGS): Add '-r' option for test links. (CFLAGS): Delete it from here. Tue May 3 16:08:09 1994 Kung Hsu (kung@mexican.cygnus.com) * gdb.t22/virtfunc.exp: Fix g++ ptype expected outputs. Fri Apr 29 14:26:35 1994 Stan Shebs (shebs@andros.cygnus.com) * Makefile.in (RUNTEST): Default to just "runtest". Tue Apr 26 22:21:40 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.t17/callfuncs.exp: More comments about t_func_values tests. * gdb.t17/gdbme.c (t_func_values): Add comments about how and why the code has been restructured. Thu Apr 21 12:48:07 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/default.exp (set write): Allow any number of \r and/or \n, not just one of each. * gdb.t07/gdbme.c (main): Don't take address of an array; SunOS4 /bin/cc gives a warning if you do. Thu Apr 21 11:54:04 1994 Kung Hsu (kung@mexican.cygnus.com) * gdb.t24/demangle.exp: change expect pattern of __t10ListS_link1ZUiRCUiPT0 Wed Apr 13 15:05:00 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.t07/{recurse.exp, recurse.c}: New tests for watchpoints on local variables in recursive functions. * gdb.t07/Makefile.in: Build the new test. Tue Apr 12 20:45:25 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.t17/gdbme.c (t_func_values): Do not compare function pointers directly. Instead compare the return values from actual calls. Mon Apr 11 10:31:00 1994 Bill Cox (bill@rtl.cygnus.com) * Makefile.in (check): Set TCL_LIBRARY for runtest. Mon Apr 11 09:15:30 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * From Peter Schauer with minor modifications. * gdb.t15/return.exp (return_tests): Handle targets where "return" stops in mid-line in the caller. Add xfail for returning a float value on X86 targets. Tue Apr 5 15:16:33 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.exp (fcmp_tests): Break up into two halves to avoid expect lossage. (fmem_LRbug_tests): Likewise. * gdb.disasm/hppa.s: Corresponding changes. * gdb.disasm/hppa.exp: Rework escape sequences and end-of-line conditions to work with latest dejagnu/expect. * gdb.t15/funcargs.exp (finish from indirect call): No longer expected to fail on the PA. (backtrace in call with trampolines): Explicitly require main to be frame #1 (no trampolines should show up in backtrace). * gdb.t00/default.exp: Use "exp_continue" rather than obsolete "continue -expect". * gdb.t06/break.exp: Likewise. * gdb.t07/watchpoint.exp: Likewise. * gdb.t13/bitfields.exp: Likewise. * gdb.t15/{funcargs,return}.exp: Likewise. * gdb.stabs/weird.exp: Likewise. * config/{mips,udi}-gdb.exp: Likewise. * hppa.sed: Enclose comments within a sed command to avoid losing with the old OSF1 sed. Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t02/whatis.exp, gdb.t08/opaque.exp: Add XFAILs for sequent dynix. * gdb.t06/signals.exp: Add clear_xfail for sequent dynix. * gdb.t15/funcargs.exp: Conditionally step again to really finish from marker_call_with_trampolines. Handle the case where the first step from within call_with_trampolines already steps us back to main. * gdb.t15/gdbme.c: Add comment to closing brace of call_with_trampolines for funcargs.exp. Tue Mar 29 23:55:27 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.t07/watchpoint.exp (test_watchpoint_triggered_in_syscall): Fix typo(s). Sun Mar 27 16:53:14 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.t07/gdbme.c: More code for watchpoint testing. * gdb.t07/watchpoint.exp: Accept both "Watchpoint" and "Hardware watchpoint" throughout file. (test_watchpoint_triggered_in_syscall): New test. (test_complex_watchpoint): New test. Fri Mar 25 17:05:31 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdbme.c (call_with_trampolines): New function to try and step into. Tests trampoline problems on the PA. * funcargs.exp (localvars_in_indirect_call): No longer expect stepping into indirect call to fail on PAs. (test_stepping_over_trampolines): New test. Wed Mar 23 07:43:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add suggestions for static member function tests, and completion tests. Wed Mar 16 08:28:28 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add suggestions for "p/a" tests. * lib/gdb.exp: Set prompt to (gdb) if it isn't already set. (default_gdb_exit): Replace all the hair with sending "quit" to the process with a simple close. Tue Mar 15 08:45:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add suggestions for shared library tests. Sun Mar 13 10:45:22 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add suggestions for x/s tests. Fri Mar 11 08:22:00 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/help.exp: Replace most of docstrings for "tbreak", "enable once", and "enable breakpoints once" with ".*". Thu Mar 10 08:34:27 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add suggestions about structure passing tests. Mon Mar 7 13:45:54 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t03/gdbme.c: gcc version 1 puts out the wrong stabs for the primary1 test, use work around if __GNUC__ < 2. * gdb.t06/signals.c: Add comments for signals.exp pattern matching. * gdb.t06/signals.exp: Add XFAILs for i386 bsd and vax ultrix. Test for bad output rather than waiting for timeout. Issue second continue only if first continue failed. Wed Mar 2 10:08:01 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * gdb.t21/cplusfuncs.exp (test_paddr_operator_functions): Do operator[] test with gdb_test because the old code didn't seem to be getting the quoting right with the new dejagnu. Thu Feb 24 19:49:25 1994 Rob Savoye (rob@poseidon.cygnus.com) * lib/gdb.exp: Set GDB to a fresh gdb if there is one, else use one from the path. * Makefile.in: Use a fresh expect if there is one, use runtest from the src tree if there is one. Thu Feb 24 18:49:37 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * gdb.t06/break.exp (test_next_with_recursion): Remove xfail for next over recursive call. Revise the tests from that point on (which had been skipped) to match GDB's actual (correct) output. * gdb.t07/watchpoint.exp (test_stepping): Remove xfail for bug with next over a breakpoint whose condition is false. * gdb.t00/help.exp: Comment out "help set print" tests just like (and for same reason as) "help set" test. Mon Feb 14 09:58:23 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.s (fmemLRbug_tests): New tests. * gdb.disasm/hppa.exp (fmemLRbug_tests): Run them. Sun Feb 6 15:36:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/break.exp (test_next_with_recursion): Remove no longer necessary gdb_target_udi. * gdb.t03/ptype.exp: For UDI, skip tests which call malloc. * gdb.t02/whatis.exp, gdb.t03/ptype.exp: Remove xfails for PRs 1838 and 2417; they are fixed. * gdb.t02/whatis.exp (v_char_array, v_signed_char_array), gdb.t03/ptype.exp (ptype structure, ptype union): Remove xfails; the test is looser than when the xfails were added. * gdb.t00/{help.exp,default.exp}: Don't test "target remote" on UDI. * gdb.t00/help.exp: Don't expect remote to be in "help target" output. * gdb.t01/run.exp: Only run shell test if isnative. * config/udi-gdb.exp (gdb_load): Use "file", not "load" command, since "run" automatically loads if necessary. Call gdb_target_udi after the "file" since "file" kills any execution target. * config/udi-gdb.exp (gdb_start): Don't send "set args main" to GDB. GDB doesn't work that way (not anymore at least) on UDI. * gdb.t01/run.exp, gdb.t06/break.exp: Don't pass extra first argument for UDI. Fri Feb 4 12:19:32 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * gdb.t17/interrupt.c: If we get EINTR, don't print an error message. * gdb.t17/callfuncs.exp: Add xfails for rs6000. Sat Feb 5 09:11:56 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t24/demangle.exp: Re-write demangle to just call gdb_test, properly quoting regexps. This makes the second argument to demangle a fixed string, which matches the callers, instead of a shell-style pattern which is what the previous implementation used. Update some of the callers. Sat Feb 5 10:19:09 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.s (comib_tests): Add missing instruction. (comib_nullified_tests): Fix typo. * gdb.disasm/hppa.exp (all comb tests): Fix thinkos in expect strings. No longer expected to fail. * gdb.disasm/hppa.s (addib_tests): Fix typo. * gdb.disasm/hppa.exp (all addb tests): Fix thinkos in expect strings. No longer expected to fail. * gdb.disasm/hppa.exp (fmpy_addsub_tests): Fix typo in expect string. No longer expected to fail. Fri Feb 4 23:45:11 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.exp (fcmp_tests): Fix thinko in expect string. No longer expected to fail. * gdb.disasm/hppa.exp (xmpyu_tests): Fix buglet in expect string. No longer expected to fail. Fri Feb 4 10:35:42 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t24/demangle.exp: Remove a bunch more tests which differ only in the names (I probably got most of them). I was even generous with some which differed in underscores in names, and probably missed a few, and I *still* was able to remove almost a third of the file with almost no impact on testsuite coverage. Thu Feb 3 12:04:49 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/default.exp: Match udi_attach error message as well as the one from child_attach. * gdb.t00/default.exp: Use "." instead of "?" to match a question mark. * gdb.stabs/weird.exp: Remove xfail for const70; just fixed in GDB. * gdb.stabs/weird.def (bad_neg0type): Size of this type is 16, not 8. * gdb.stabs/weird.exp: Remove xfail for "p bad_neg0"; this fixes it. * Move test with enums and partial symbols back to gdb.t03/{ptype.exp,gdbme.c} from gdb.stabs/{weird.def,weird.exp}. Reverts the change of 26 May 93. Per today's change to stabs.texinfo, the behavior that weird.exp was expecting was unreasonable; what is important is that the compiler+gdb get things right, which happens with a recent gcc. Also fix the test to deal with native compilers which put out the stab gdb can't deal with. Mon Jan 31 15:40:11 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t24/demangle.exp: Remove a bunch of tests which differ only in the names. The main thing these accomplish is to slow things down. Many more such duplicates surely remain. * gdb.t00/help.exp: Comment out "help support" test just like (and for same reason as) "help set" test. Mon Jan 31 06:43:45 1994 Fred Fish (fnf@cygnus.com) * gdb.t06/break.exp: Remove setup_xfails for sparc-sun-solaris2.*, these tests now pass with latest gcc and gdb. * gdb.t20/inherit.exp (test_ptype_si): Update warning message about known bug in gcc to include up through 2.5.8. * gdb.t20/inherit.exp (test_ptype_vi): Accept "_vb." as well as well as "_vb$". * gdb.t21/cplusfuncs.exp (test_lookup_operator_functions): Remove setup_xfails for sparc-sun-solaris2.*, these tests now pass with latest gcc and gdb. * gdb.t22/virtfunc.exp (test_ptype_of_classes): Accept "_vb." as well as "_vb$". Sat Jan 29 23:31:26 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * configure.in (hppa*-*-*): Also configure and build stabs-only tests. Thu Jan 27 08:21:16 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.t10/hppa.mt: A makefile fragment for the PA. * gdb.t10/configure.in (hppa*-*-*): Use it. Tue Jan 25 12:58:26 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t09/corefile: Increase timeout when spawning gdb explicitly. Wed Jan 19 12:40:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t06/signals.exp: Handle blocked SIGTRAP on sun3 for bash versions prior to 1.13.5. Tue Jan 18 20:10:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/default.exp (show prompt): In FAIL case, only match if the prompt is at the start of a line. Mon Jan 17 20:07:51 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.disasm/hppa.s: Add new tests for sfu and copr instructions. Enable "diag" instruction. Delete copr from fpu_misc_tests, it's in the copr tests now. * gdb.disasm/hppa.exp: Run new sfu and copr tests. Do not expect copr in the fpu_misc tests anymore. fpu_misc tests are no longer expected to fail. Fri Jan 14 14:24:21 1994 Rob Savoye (rob@darkstar.cygnus.com) * gdb.t00/teststrategy.exp, gdb.t07/watchpoint.exp, gdb.t31/chillvars.exp, lib/gdb.exp: Tweak to run under either version of expect. * lib/gdb.exp (default_gdb_exit): Remove "catch" statement. * gdb.t00/teststrategy.exp: Use isnative and verbose procedures. * gdb.t11/list.exp: Remove extraneous whitespace. Sat Jan 15 09:57:22 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t16/printcmds.exp (test_print_strings): Accept "(unsigned char *) " before the string. * TODO: Add notes about printing of fancy types and GDB expressions. Thu Jan 13 17:16:09 1994 Stan Shebs (shebs@andros.cygnus.com) * Makefile.in: Pass LDFLAGS and LIBS to sub-makes. * gdb.t06/configure.in: Don't try to compile signals test program if doing mips-idt-ecoff. Thu Jan 13 08:25:55 1994 Rob Savoye (rob@darkstar.cygnus.com) * Most .exp files: Tweak to run under either version of expect. Tue Jan 11 15:21:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t12/scope.exp: Add xfails for rs6000. Remove 1806 from existing xfails; I'm not sure why they are failing, but not because of PR 1806. Mon Jan 10 22:14:20 1994 Rob Savoye (rob@darkstar.cygnus.com) * config/unix-gdb.exp: Remove gdb_unload cause it's already defined in lib/gdb.exp. Fri Jan 7 12:42:45 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t07/watchpoint.exp: Clear xfail for calling function with watchpoint enabled on mips, CALL_DUMMY_BREAKPOINT_OFFSET got defined. * gdb.t20/gdbme.cc, gdb.t21/gdbme.cc: Conversion operator functions have to be typeless. Tue Jan 4 09:32:22 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Add suggestion for copyright year test. Mon Jan 3 11:35:26 1994 Stan Shebs (shebs@andros.cygnus.com) * configure.in (*-*-lynxos*): Add stabs tests. Wed Dec 1 21:54:05 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.stabs/hppa.sed: Only lables should ever start in column zero, so insert a tab before any assembler directive in column zero. * gdb.disasm/hppa.exp (all_fpu_memory_tests): Test FP quadword stores. * gdb.disasm/hppa.s (fpu_memory_indexing_tests): Add FP quadword stores. (fpu_short_memory_tests): Likewise. Mon Nov 22 13:23:22 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.stabs/ecoff.mt: Delete alpha specific if block, fix typo. * gdb.stabs/ecoff.sed: Escape inserted blanks with backslashes, embed .stabs directives in comments. Fri Nov 19 14:09:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: New file, describing tests we could write. * gdb.t09/corefile.exp: Move description of tests to write to TODO. Tue Nov 16 21:07:44 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/signals.exp: Add kludge to force re-sync. * gdb.t00/teststrategy.exp: If we accidently send the "maint dump-me" to xgdb instead of gdb, get out of gdb. Tue Nov 16 10:21:57 1993 Rob Savoye (rob@cygnus.com) * lib/gdb.exp: Make GDB and GDBFLAGS global so the scoping work for info. Sat Nov 13 23:17:48 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * gdb.stabs/hppa.mt: A makefile fragment for the PA. * gdb.stabs/configure.in (hppa*-*-*): Use it. * gdb.stabs/hppa.sed: New sed script for the PA. Sat Nov 13 22:50:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.stabs: Re-write weird.def and configuration to use sed instead of cpp. sed is portable and POSIX; cpp is neither. Fri Nov 12 15:26:36 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/signals.exp: Remove one sun3 XFAIL which has been fixed. Mon Nov 8 16:55:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t20/gdbme.cc: Add comment about pmi being optimized out. Thu Nov 4 23:07:59 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.stabs/weird.exp, gdb.t22/virtfunc.exp: Accept "_vb." as well as "_vb$". * gdb.t00/teststrategy.exp: Add xfail for RS/6000. * gdb.t03/ptype.exp: Add comments and messages about FAILs with xlc. Wed Nov 3 13:53:34 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * lib/gdb.exp: Comment out code which depends on non-existent `transform' procedure. Wed Nov 3 11:23:11 1993 Rob Savoye (rob@darkstar.cygnus.com) * lib/gdb.exp (default_gdb_exit): Remove `catch "close"'. * lib/gdb.exp: Transform tool name. * gdb.t*/*.exp: Change error to perror so it works with DejaGnu 1.1's new error handling system. Mon Nov 1 10:36:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in, gdb.t2*/Makefile.in: Add -O to CXXFLAGS. Fri Oct 29 17:58:14 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/default.exp: Avoid tests with a lot of .* in them. They made pattern matching so slow that timeouts happened on heavily loaded systems. Now any output from "show print" which gets us back to the GDB prompt is a PASS. Mon Oct 25 14:36:50 1993 Stu Grossman (grossman at cygnus.com) * gdb.disasm/hppa.mt: Use $(srcdir) in hppa.o make rule. Mon Oct 25 13:35:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/signals.exp: Skip whole file with xfail for HPPA. * gdb.t24/demangle.exp: Remove "3220" from the one remaining xfail. It is not from PR 3220. Sun Oct 24 18:49:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/{help.exp,default.exp}: Loosen up a few more tests which just started failing because they depended on the order the subcommands are presented, or exact docstring text. This kind of test is a pain and has minimal benefit. Thu Oct 21 08:26:48 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t09/corefile.exp: At end of test, use "core" command with no arguments. Wed Oct 20 08:56:02 1993 Stu Grossman (grossman at cygnus.com) * gdb.t{01 02 03 04 05 06 07 08 09 10 11 12 13 15 16 17}/Makefile.in: Make it possible to run the testsuite with Sun make and CC = cross gcc by adding explicit build rules for .o files. Tue Oct 19 14:57:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t15/funcargs.exp: Don't put comments on same line as setup_xfail (@#$*%& tcl braindamage!). Mon Oct 18 21:50:08 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.disasm/hppa.exp: Use $objdir/$subdir/$binfile not just $binfile. Fri Oct 15 15:39:54 1993 Kung Hsu (kung@cirdan.cygnus.com) * gdb.t20/classes.exp: 'const xxx &' becomes 'xxx const &'. * gdb.t20/inherit.exp: remove three dumplicate entries. Fri Oct 15 13:45:25 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t06/break.exp: For "next over recursive call", fail on any incorrect output, not just on "factorial (value=2)". Fri Oct 15 11:52:56 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t12/scope.exp: Remove xfails, filename::var syntax should be working now. Add an xfail if accesing a bss variable causes a memory error if the target is not yet run. Thu Oct 14 19:16:56 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t24/demangle.exp: Clean up spacing (2 strings), inclusion of constructor name (2 string), name of _GLOBAL_ demangling (2 strings), name of __st* demangling (2 strings). Did Kung really get the more than 95 others right without testing them? Thu Oct 14 16:27:08 1993 Kung Hsu (kung@cirdan.cygnus.com) * gdb.t24/demangle.exp: clean up XFAILS, more than 100 Thu Oct 14 11:40:30 1993 Jeffrey Law (law@cs.uah.edu) * configure.in (configdirs): Add gdb.disasm * gdb.disasm: New directory for GDB disassembler tests. * gdb.disasm/hppa.{exp,s,mt}: Disassembly tests for the HPPA. Thu Oct 14 11:40:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/help.exp: Don't test "help set". * gdb.t20/inherit.exp, gdb.t22/virtfunc.exp: Remove all xfails from within expect statements. None of these happen anymore and they cause regressions to be silently unnoticed. * gdb.t20/inherit.exp, gdb.t22/virtfunc.exp: Add notes (in failure messages) about known failures with gcc cygnus-2.4.5-930417. * gdb.t02/Makefile.in, gdb.t08/Makefile.in: Make all depend on comp-info.exp so it gets built if it doesn't exist. * gdb.t13/{Makefile.in,bitfields.exp}: Remove comp-info.exp stuff; it is no longer used. * gdb.t13/comp-info.c: Removed. Wed Oct 13 22:54:06 1993 Jim Kingdon (kingdon@deneb.cygnus.com) * gdb.t06/signals.exp: Add xfail for sun3. Thu Oct 7 12:01:03 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t17/interrupt.exp: Add xfail for Irix (currently not really relevant because ^C doesn't get sent but failure can be reproduced interactively). Tue Oct 5 10:43:11 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.stabs/alpha.mt: New configuration file for alpha. * gdb.stabs/configure.in: Use it. * gdb.stabs/ecoff.mt, weird-ecoff.sed: Change sed script to enable sharing with alpha.mt, redefine long to word via preprocessor. * gdb.stabs/weird.def: Conditionally adapt storage layout of v_comb for alpha. * gdb.stabs/weird.exp: Handle compilation of weird.s by alpha native cc. * gdb.t00/teststrategy.exp: Change expect string so that we consume the `(xgdb)' from the command echo and from the gdb prompt. * gdb.t05/expr.exp: xfail "print unsigned int == (~0)" on the alpha. gdb currently compares all values as long, so this failure probably applies to any configuration where LONGEST is bigger than a target int. * gdb.t08/comp-info.c: New file to determine if gdbme is compiled with gcc. * gdb.t08/Makefile.in, opaque.exp: Use it. Alpha native cc is unable to handle opaque pointers, gcc is. * gdb.t21/gdbme.cc, gdb.t23/gdbme.cc: operator new takes a size_t as first argument. Include and change all operator new definitions to use size_t. * gdb.t21/cplusfuncs.exp: Handle changes in output for operator new now that we use size_t. Wed Sep 29 00:55:49 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t03/ptype.exp, gdb.t15/printcmds.exp: When constructing a long or float array cast all array members to the same type. * gdb.t04/setvar.exp: Handle the decimal output of an unsigned long with 64 bit longs. * gdb.t07/watchpoint.exp: Add finish and until variations encountered on alpha. * gdb.t08/opaque.exp, gdb.t17/interrupt.exp: Add xfails for alpha. Tue Sep 28 17:26:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t24 (demangle.exp): Constructors of templates have names like vector::vector(int) not vector::vector(int). See section 14.6 of the ARM. * gdb.t24 (demangle.exp): Remove a whole bunch of tests of the form "_vt$MoveCmd"; these differ only in name from "_vt$foo", so they accomplish little and slow down the testsuite. * gdb.t24 (demangle.exp): Accept "XXX const" as well as "const XXX". Accept spaces various places. Tue Sep 21 17:28:45 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t07/watchpoint.exp: On sparc, clear xfail for calling function with watchpoint enabled. * Makefile.in: Remove definition of CC and remove the second definition of CXX (the "CXX = gcc" one remains). These definitions were causing backquotes to be expanded within backquotes, which doesn't work. Sat Sep 18 09:43:21 1993 Jim Kingdon (kingdon@poseidon.cygnus.com) * gdb.t17/callfuncs.exp: Add "return 0" to end. Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.stabs/ecoff.mt: Remove STABSCC hack. * gdb.stabs/weird.exp: Handle the case where weird.o is compiled by mips cc and contains no stabs entries. Thu Sep 16 17:22:12 1993 Rob Savoye (rob@darkstar.cygnus.com) * config/vx-gdb.exp: Use fake device to load files rather than NFS. * lib/gdb.exp: New proc to do "file" command. * config/unix-gdb.exp: Use new "file" proc. Thu Sep 16 13:45:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * config/mips-gdb.exp (gdb_load): Increase timeout to 2400. Rework board rebooting slightly. (gdb_exit): Don't exit from the remote shell; there isn't one. * gdb.stabs/weird.exp: If a program is being debugged already, kill it. * gdb.t04/setvar.exp: Stop and restart gdb. * gdb.t05/expr.exp: Likewise. * gdb.t07/watchpoint.exp: If target is mips-idt-*, stop and restart gdb and reload the program. * gdb.t08/opaque.exp: Likewise. * gdb.t12/scope.exp: Likewise. * gdb.t13/bitfields.exp: Likewise. * gdb.t15/funcargs.exp: Likewise. * gdb.t20/classes.exp: Likewise. * gdb.t03/ptype.exp: Increase timeout. * gdb.t16/printcmds.exp (test_print_string_constants, test_print_array_constants): Likewise. * gdb.t17/callfuncs.exp (do_function_calls): Likewise. * gdb.t20/classes.exp (do_tests): Likewise. * gdb.t22/virtfunc.exp (test_virtual_calls): Likewise. Wed Sep 15 14:24:36 1993 Ian Lance Taylor (ian@cygnus.com) * gdb.stabs: Renamed *wierd* to *weird*. Wed Sep 15 10:36:50 1993 Jim Kingdon (kingdon@cirdan.cygnus.com) * gdb.t13/bitfields.exp: Test for bad output rather than waiting for timeout. Add "known gcc 2.4.5 bug" to failure message. Tue Sep 14 17:16:44 1993 Jim Kingdon (kingdon@cirdan.cygnus.com) * gdb.stabs/wierd.exp (print_wierd_var): Test size, not type name. (do_tests): Remove xfail for whatis on one_var and two_var. Wed Sep 8 23:14:23 1993 Rob Savoye (rob@darkstar.cygnus.com) * Makefile.in: Made cross building work better by adding {RUNTEST,CC}_FOR_TARGET and using TARGET_FLAGS_TO_PASS. Tue Sep 7 14:11:52 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t15/{return.c,return.exp,Makefile.in}: New test, currently commented out. Tue Aug 31 16:51:29 1993 Rob Savoye (rob@darkstar.cygnus.com) * config/udi-gdb.exp: gdb_exit now kills any isstip processes still running and removes the leftover named socket so GDb can do clean restarts. Mon Aug 30 17:55:16 1993 Rob Savoye (rob@darkstar.cygnus.com) * gdb.t01/run.exp: Add match for VxWorks, cause I/O comes out the console, not GDB. * config/mt-*: Added default values for RUNTEST and RUNTESTFLAGS so cross testing works better with "make check" * config/unix-gdb: Use default procedures for exit and version. * config/vx-gdb.exp: Cleaned up and massaged back to working order with the newest VxWorks. Thu Aug 26 17:50:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t20/classes.exp: For "ptype class Base1", continue to accept old form. * gdb.t22/virtfunc.exp: If it prints `struct' (not `class') with a name (e.g. devo gdb with gcc 2.4.5), it is still a pass. * gdb.t10/crossload.exp: Skip whole file (for now, until we fix it). * config/unix-gdb.exp: Remove this version of gdb_exit * lib/gdb.exp: Merge in all the crap from config/unix-gdb.exp. Rob says he'll look at it when he gets back to testing boards. Thu Aug 26 07:20:00 1993 Fred Fish (fnf@deneb.cygnus.com) * gdb.t22/virtfunc.exp: Accept missing struct/class names as an expected fail for certain ptype commands. * gdb.t20/classes.exp: Update expected results of "ptype class Base1" to account for the constructor that now appears in the type. Wed Aug 25 16:48:05 1993 Fred Fish (fnf@deneb.cygnus.com) * configure.in (configdirs): Restore gdb.t04, which mysteriously disappeared from list. * config/{udi-gdb.exp, gdb-unix.exp}: Replace calls to obsolete "alldone" proc with call to cleanup and exit. * {gdb.t01/run.exp, gdb.t01/term.exp, gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t06/break.exp, gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, gdb.t09/corefile.exp, gdb.t10/crossload.exp, gdb.t11/list.exp, gdb.t12/scope.exp, gdb.t13/bitfields.exp}: Replace calls to "alldone" proc with simple returns that suppress remaining tests. The alldone proc went away many months ago. Tue Aug 24 11:04:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t10/nodebug.exp: Comment out "maint print msymbols" tests. * gdb.t12/gdbme0.c (localscopes, autovars): Modify to foil gcc -O. Thu Aug 19 22:08:41 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t15/funcargs.exp: Allow arguments for main in backtraces as vax gdb will display them. Thu Aug 19 18:18:59 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t20/gdbme.cc: Do some calculation with v.x, to confound optimizers. * scope.exp: Change "bad value for localval" messages so each one is unique. * config/unix-gdb.exp (gdb_exit): Move info on this vs. lib/gdb.exp (gdb_exit) from ChangeLog to comments. * gdb.t06/signals.exp: Skip the whole file with xfail for delta68. Tue Aug 17 00:05:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/teststrategy.exp: Deal with it if cmdsize = 1 line doesn't exist (due to optimization). Mon Aug 16 21:05:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.stabs/wierd.exp: Deal with it if echo of "file" command contains \r because the filename is long. * gdb.t06/signals.exp: Revise comments regarding "'next' behaved as 'continue'" bug, and change xfail back to i*86-univel-sysv4*. Mon Aug 16 03:05:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t00/help.exp, gdb.t02/whatis.exp, gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, gdb.t17/interrupt.exp: Update for vax running Ultrix. * gdb.t02/whatis.exp: Use procedure to setup xfails on long versus int tests. * gdb.t08/opaque.exp: Use procedure to setup xfails for opaque tests. Thu Aug 12 15:24:28 1993 Fred Fish (fnf@deneb.cygnus.com) * Makefile.in (distclean): Remove *.log *.plog *.sum *.psum site.*. * gdb.t17/interrupt.exp: Fix 'missing Continuing' case so pattern to match does not match the passing case but still matches the failing case. Thu Aug 12 16:58:59 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in (distclean): Remove *.plog *.sum *.psum site.*. Wed Aug 11 19:47:27 1993 John Gilmore (gnu@rtl.cygnus.com) * lib/gdb.exp (gdb_exit): Move the best version of gdb_exit to here. Fix 'Quit anyway.*?' bug (? is a regexp metacharacter). * config/{mips-gdb.exp, nind-gdb.exp, udi-gdb.exp, vx-gdb.exp}: Remove various versions of gdb_exit. * config/vx-gdb.exp: Remove quit_vxgdb, change a caller to call gdb_exit. * config/unix-gdb.exp: gdb_exit remains here, and should override the generic version, since it's doing a lot of wierd stuff that the other versions aren't. FIXME, fold it in, or abandon this version. Wed Aug 11 12:09:32 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t24/demangle.exp: Add tests for PR 3220. Tue Aug 10 15:49:35 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t24/demangle.exp: Add lucid test for __vtbl__3foo__vt_cc_main_. Tue Aug 10 15:45:25 1993 Fred Fish (fnf@deneb.cygnus.com) * gdb.t07/watchpoint.exp: Clear xfail with "i*86-*-*", not just "i386-*-*". Works for i486 as well. * gdb.t06/signals.exp: Rework code that recognizes known SVR4 bug, and expand domain of xfail to all SVR4 systems, since the actual problem is likely to be in generic SVR4 /proc support. Tue Aug 10 15:49:35 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * config/unix-gdb.exp (gdb_load): Add eof to expect statement. Tue Aug 10 09:56:56 1993 Fred Fish (fnf@deneb.cygnus.com) * gdb.t17/interrupt.exp: Set up xfail for *-*-sysv4*, in chain of xfails for other systems. Match a missing 'Continuing.' as an explicit fail for i*86-*-sysv4*, so it doesn't hose other tests. * gdb.t20 {classes.exp, inherit.exp, misc.exp}, gdb.t21/cplusfuncs.exp, gdb.t22/virtfunc.exp, gdb.t23/templates.exp, gdb.t31/chillvars.exp: Only issue warning for missing executables if -all option is used. * gdb.stabs/wierd.exp: Only issue warning for missing wierd.o file if -all option is used. It's like an unpredictable XFAIL. Mon Aug 9 10:13:34 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t15/funcargs.exp: Add comments that hppa xfails are only for dynamically linked binaries. * gdb.t10/crossload.exp: Add `set gnutarget auto' at end of tests. Sun Aug 8 14:21:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t20/inherit.exp: Change message for "print tagless struct" to state that this is a known bug in old versions of g++. Fri Aug 6 21:40:30 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t17/interrupt.exp: Add xfail for 386 bsd. Accept echoed newline while waiting for `Continuing'. Fri Aug 6 13:38:08 1993 Fred Fish (fnf@deneb.cygnus.com) * gdb.t10/nodebug.exp: Expect to find local/global minimal symbols in text, data, and bss. * gdb.t10/nodebug.c: Add local and global test variables for initialized and uninitialized data. Thu Aug 5 12:18:40 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * config/unix-gdb.exp (gdb_exit): Add "wait". Thu Aug 5 18:14:06 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t06/signals.exp: xfail the continue from the handler for all targets. * gdb.t07/watchpoint.exp: clear_xfail for i386 when calling a function with watchpoints enabled, the i386 call dummy starts with a call. * gdb.t00/teststrategy.exp, gdb.t09/Makefile.in: Handle the way 386 bsd names its corefiles. Wed Aug 4 08:53:41 1993 Fred Fish (fnf@cygnus.com) * gdb.t10/Makefile.in (nodebug.o): Don't use "-c -o", many compilers don't grok it. * gdb.t16/gdbme.c (ctable1): Initialize unsigned char array with small octal ints rather than character constants, which are signed and might not fit if first promoted to int. Tue Aug 3 18:28:25 1993 Fred Fish (fnf@cygnus.com) * gdb.t09/Makefile.in (clean): Remove corefile. Mon Aug 2 12:47:44 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t07/watchpoint.exp: Add missing `$prompt $'. Mon Aug 2 12:30:14 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) and Jim Kingdon (kingdon@cygnus.com) * gdb.t06/signals.exp: Change xfail from "*-*-*" to be only for NO_SINGLE_STEP machines. Fix comment about its cause. Uncomment the `continue' test right after it (also xfailed if NO_SINGLE_STEP). Fri Jul 30 19:46:55 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t17/interrupt.exp: Add xfail for hppa. Fri Jul 30 12:54:11 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t08/opaque.exp, gdb.t09/corefile.exp: Cleanup xfails for fixed mips bugs. * gdb.t13/bitfields.exp, gdbme.c: Examine a variable in the inferior to determine signed-ness of bitfields and use the result to setup the xfail. * gdb.t15/gdbme.c: Add comments to the two indirect call0a lines. * gdb.t15/funcargs.exp: Use them to step until the second indirect call line is reached if necessary. Thu Jul 29 20:33:08 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.stabs/wierd.exp: New test, for nameless baseclasses. Mon Jul 26 00:15:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/break.exp: Also test `clear' command. Wed Jul 21 18:03:38 1993 Jim Kingdon (kingdon@deneb.cygnus.com) * gdb.t00/teststrategy.exp: Remove extra quote. * gdb.t07/watchpoint.exp: Change xfail for calling function with watchpoint enabled to be for all non-68k machines. * gdb.t15/{mips_pro.{c,exp},Makefile.in}: New test. Mon Jul 19 23:59:26 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.stabs/configure.in: If configured -with-gnu-as for mips-*-* targets use aout.mt instead of ecoff.mt as gas understands standard aout format. Mon Jul 19 18:14:06 1993 Jim Kingdon (kingdon@deneb.cygnus.com) * lib/gdb.exp (runto): Don't insist that function we are running to was compiled with -g. * gdb.t10/{nodebug.{c,exp},Makefile.in}: New test. * gdb.t17/interrupt.exp: Before sending ^C, give the inferior time to get back into the read system call. Accept leading newline in case where we woke it up. Sun Jul 18 08:40:45 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.stabs/{ecoff.mt,wierd-ecoff.S,wierd-ecoff.sed}: New files to make the stabs test work on ecoff systems using gcc and -with-stabs. * gdb.stabs/{Makefile.in,configure.in,aout.mt,xcoff.mt}: Modify to enable ecoff configuration. Thu Jul 15 11:54:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t15/funcargs.exp (localvars_in_indirect_call): New test. Wed Jul 14 09:36:42 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t16/printcmds.exp: Add another printf test. Wed Jul 14 15:37:13 1993 Ian Lance Taylor (ian@cygnus.com) * configure.in: If configured -with-stabs on any target, add stabsdirs to configdirs. Wed Jul 14 09:36:42 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t16/printcmds.exp: Change printf "%f\n" to printf "%f is fun" so pattern does not match the command itself. Mon Jul 12 11:22:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t15/{gdbme.c,funcargs.exp}: Test for alloca-influenced frames. Sun Jul 11 12:03:24 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t17/interrupt.exp: Test for more things. Fri Jul 9 14:11:17 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t07/watchpoint.exp: In until test, deal with the way the DEC compiler arranges the code and line numbers. * gdb.t17/interrupt.exp: Don't send \n after ^C. Fri Jul 9 09:47:02 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t00/help.exp: Increase expect input buffer size. Thu Jul 8 14:26:50 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/signals.exp: Remove sparc xfail; bug fixed. * gdb.t07/watchpoint.exp: Add xfail for hppa. * gdb.t17/{gdbme.c,callfuncs.exp}: Add sum10 function, to test pa bug. * gdb.t06/signals.exp: At "p func1 ()" test, check for breakpoint [0-9]*, not just [0-9]. Wed Jul 7 17:52:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t20/{gdbme.cc,classes.exp}: Add xfail for gdb/2972. * gdb.t2*: Set CXXFLAGS, not CFLAGS, since that's what we use. Tue Jul 6 13:54:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/help.exp: Replace most of docstring for "continue" with .*. Mon Jul 5 22:03:45 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/signals.c: Add xfails for sun3. * gdb.t07/watchpoint.exp: Comment out xfail for fixed bug 1836. * gdb.t07/{gdbme.c,watchpoint.exp}: Add test for 2597. Also add test_stepping tests. Fri Jul 2 09:08:10 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t{06,17}/Makefile.in (clean): Remove all executables. * gdb.t17/{interrupt.{c,exp},Makefile.in}: New test for solaris bug. * gdb.t06/twice.exp, Makefile.in: Just use an include of twice.c rather than actually putting it through cpp twice. * gdb.t06/signals.exp: Add xfails for unixware and rs6000. Fri Jul 2 10:48:03 1993 Ian Lance Taylor (ian@cygnus.com) * config/mips-gdb.exp (gdb_exit): Removed close statement which is no longer needed. Fri Jul 2 09:08:10 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t06/signals.exp: Add test for sparc bug with do_save_insn. * gdb.t20/{classes,inherit}.exp: If a class which doesn't use any C++ features prints as "struct", make it a pass, not an xfail. Thu Jul 1 22:03:33 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t22/virtfunc.exp: Remove a bunch of xfails. Don't require VA to print as "class" rather than "struct". Thu Jul 1 18:27:40 1993 Jim Kingdon (kingdon@cygnus.com) * gdb.t06/twice.exp: Don't care about the file name GDB prints. Wed Jun 30 18:01:00 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t{02,13}/comp-info.c, gdb.t06/twice.exp: Add "return 0" to end. Tue Jun 29 13:15:42 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t12/scope.exp: Remove xfail for parameter printing in wrong order. Tue Jun 29 09:22:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t16/printcmds.exp: Add printf tests. * gdb.t06/{twice.{c,exp},Makefile.in}: New test. * gdb.t10/Makefile.in (clean): Remove $(EXECUTABLES) too. Mon Jun 28 11:25:59 1993 Fred Fish (fnf@cygnus.com) * gdb.t20/classes.exp: Add clear_xfail's before printing summary pass counts, to counteract any existing or future setup_xfails. Mon Jun 28 09:15:17 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.stabs/wierd{.def,-aout.S,-xcoff.S}: Use new macros {BEGIN,END}_COMMON for common block instead of STAB. * gdb.stabs/wierd.exp: Add xfail for rs6000. * gdb.stabs/wierd.def: Make value of N_GSYM's 0. intp_var should be N_GSYM not N_LSYM. wierd-aout.S: Use a label for the value of the N_SO. wierd.def: Remove all backslashes. wierd-{aout,xcoff}.S: Put a few tests with backslashes here. Mon Jun 28 07:21:51 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t20/gdbme.cc (main): Move variable initialization for AIX to get the expected next to inheritance3. Sun Jun 27 12:29:53 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t00/teststrategy.exp: Remove expected failure for mips-*-* now that gcc-2.4 gets it right. Fri Jun 25 12:00:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.stabs/wierd{.def,.exp,-aout.S,-xcoff.S}: Add common block test. * gdb.t{02,13}/{Makefile.in,gdbme.c,comp-info.c}: New way of generating comp-info.exp which works for cross-compilation. Thu Jun 24 16:55:05 1993 Fred Fish (fnf@cygnus.com) * gdb.t11/list.exp: For SVR4 xfails, match "*-*-sysv4*", not "*-*-sysv4.*". Tue Jun 22 21:17:26 1993 Fred Fish (fnf@cygnus.com) * gdb.t01/run.exp: Start with a fresh gdb. * gdb.t11/list.exp: For SVR4 xfails, match on all versions of SVR4.x. Mon Jun 21 15:23:22 1993 Fred Fish (fnf@cygnus.com) * {gdb.t01, gdb.t02, gdb.t03, gdb.t04, gdb.t05, gdb.t06, gdb.t07, gdb.t08, gdb.t09, gdb.t10, gdb.t11, gdb.t12, gdb.t13, gdb.t15, gdb.t16, gdb.t17, gdb.t20, gdb.t21, gdb.t22, gdb.t23, gdb.t30}/ Makefile.in (distclean, realclean): Remove gdbme.c from list of things to remove. Sat Jun 19 07:49:10 1993 Fred Fish (fnf@cygnus.com) * gdb.t24/demangle.exp (test_gnu_style_demangling): Add some new test cases from bug reports. Fri Jun 18 10:38:49 1993 Fred Fish (fnf@cygnus.com) * gdb.t06/break.exp: Add xfails for sparc-sun-solaris2.*. * gdb.t12/scope.exp: Add clear_xfails at appropriate places to avoid spurious xfails. * gdb.t20/classes.exp: Add xfails for longstanding C++ problems. * gdb.t21/cplusfuncs.exp: Add xfails for sparc-sun-solaris2.*. * gdb.t22/virtfunc.exp: Add xfails for longstanding C++ problems. Wed Jun 16 10:11:57 1993 Fred Fish (fnf@cygnus.com) * gdb.t00/teststrategy.exp: Rework to provide more useful description of each test, fix problem with systems that define ALIGN_STACK_ON_STARTUP code, other misc cleanups. * gdb.t06/break.exp (test_next_with_recursion): Fix expected results for "next over recursive call" so timeouts aren't taken by error. Mon Jun 14 09:09:04 1993 Jim Kingdon (kingdon@cygnus.com) * gdb.t12/scope.exp: Test printing of variables before run. * gdb.t12/{gdbme0.c,scope.exp}: Test for bug where parameters are printed in wrong order due to sorting. Sat Jun 12 15:03:58 1993 Fred Fish (fnf@cygnus.com) * gdb.t00/teststrategy.exp: Fix expected results for printing user entered string constant. Is array of char, prints with no address. * gdb.t00/{default.exp, help.exp}: Account for changes to radix commands. * gdb.t16/gdbme.c: Add and use struct containing arrays of char. * gdb.t16/printcmds.exp: Fix all lines that match "unsigned char *". * gdb.t16/printcmds.exp (test_print_char_arrays): Test printing of struct of char arrays. * gdb.t00/radix.exp: New tests for radix commands. Fri Jun 11 13:12:27 1993 Jim Kingdon (kingdon@cygnus.com) * gdb.t16/printcmd.exp: Print a variable before running program (with xfail for AIX). Thu Jun 10 11:04:04 1993 Jim Kingdon (kingdon@cygnus.com) * gdb.t06/{signals.exp,signals.c,Makefile.in}: New test. * gdb.t16/printcmd.exp: Don't print variables before running program. * gdb.t06/break.exp: Don't require envp argument to main. * gdb.t0{2,3,4,5}/gdbme.c [_AIX]: Use signed keyword. * gdb.t02/whatis.exp, gdb.t11/list.exp: Add xfails for rs6000. * gdb.t02/whatis.exp: Change other tests not to re-test something we already tested. * gdb.t{03,15,16}/gdbme.c: Reference all variables and make sure each type used has a variable of that type. Tue Jun 8 16:45:20 1993 Jim Kingdon (kingdon@rtl.cygnus.com) * gdb.t20/{inherit.exp,gdbme.cc}: Test tagless structure. Fri Jun 4 11:07:19 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) * configure.in: change srctrigger to be a file, not a directory Fri Jun 4 08:23:57 1993 Ian Lance Taylor (ian@cygnus.com) * configure.in (mips-idt-ecoff*): Added trailing '*'. * gdb.t11/list.exp: Fixed a couple of typos. Tue Jun 1 21:28:06 1993 Fred Fish (fnf@cygnus.com) * gdb.t00 (teststrategy.exp): Remove notice about PR 1823. Bug is fixed and PR is closed. * gdb.t16 (gdbme.c): Add simple test string variable. * gdb.t16 (printcmds.exp): Add tests with simple test string variable, primarily for boundaries on "set print elements". Mon May 31 11:36:08 1993 Jim Kingdon (kingdon@cygnus.com) * gdb.stabs/wierd.exp: Remove xfail for printing big integer. Make leading 0's optional and don't expect a tab in the middle of the number. * gdb.t00/teststrategy.exp: Remove xgdb before trying the copy. * gdb.stabs/wierd.def: Type attributes must be preceded by number=. * gdb.stabs/wierd.exp: Remove xfails for type attributes. Also don't end command passed to gdb_test with newline. * gdb.t13/{Makefile.in,gdbme.c,bitfields.exp}: If we #defined the signed keyword away, don't expect signed bitfields to be signed. * gdb.t13/bitfields.exp (bitfield containment): Accept the fields printing with only as many 1's as are in the field as well as printing with 32 1's (see comment). Sat May 29 17:57:01 1993 Fred Fish (fnf@cygnus.com) * gdb.t00/default.exp: Start with a fresh gdb. * configure.in (configdirs): Remove gdb.t31 until the chill compiler works again. It no longer is able to find chillrt0 since it isn't in libchill.a anymore. * gdb.stabs/wierd.exp: Rewrite to properly handling a missing wierd.o, make more modular. * gdb.stabs/wierd.def (bad_neg0type, bad_neg0const): Remove spurious newlines that caused problems. Wed May 26 09:57:19 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * Move test with enums and partial symbols from gdb.t03/ptype.exp to gdb.stabs/wierd.exp since GCC has worked around the bug. gdb.stabs/wierd.{exp,def}: Many new tests. * gdb.t00/default.exp: update info line for new message. * gdb.t02/{whatis.exp,gdbme.c}: Test that "char *" doesn't print as "caddr_t". Tue May 25 13:28:27 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t00/help.exp: Use .* in place of some help messages which just changed. gdb.t00/default.exp: Update "info frame" test for new message. * gdb.stabs/wierd.exp: Check for eof, directly or via gdb_test. Remove some xfails Mon May 24 00:24:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * gdb.t03/{gdbme.c,ptype.exp}: Add tests for typedef'd struct and union without tags. Also check "whatis" on a variable of a typedef'd enum without a tag. * gdb.t00/teststrategy.exp: For p "foo", remove sun4 XFAIL (see PRMS 1823; the bug still exists but isn't reproduced by this test anymore), and remove rs6000 XFAIL (the bug is fixed). * gdb.t03/ptype.exp: Comment out a lot of tests which are basically duplicated from whatis.exp. For those that are left, accept "long", "long int", or "int" for long variables (whatis.exp already has an XFAIL for "int", so no need to fail it here). * gdb.t02/whatis.exp, gdb.t10/crossload.exp: Deal with GCC's names for types now that GDB uses the compiler's names. * gdb.t02/{Makefile.in,gdbme.c,whatis.exp}: If not GCC, do some setup_xfail's for sunos4. If we #defined the signed keyword away, don't expect GDB to know that char it is signed. * gdb.t00/teststrategy.exp: Update for symbolic signal names. Sun May 23 08:44:55 1993 Fred Fish (fnf@cygnus.com) * configure.in (configdirs): Add gdb.t24 for C++ tests that should work on any system, regardless of debugging format. * gdb.t21/demangle.exp: Move to gdb.t24. * gdb.t24/demangle.exp: Move from gdb.t21. * gdb.t24/{Makefile.in, configure.in}: New files. Thu May 20 19:39:03 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * configure.in: Do gdb.stabs and C++ tests only for stabs. * gdb.stabs: New directory. Tue May 18 21:12:09 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * config/{mips,nind,udi,unix,vx}-gdb.exp: Look for "Quit anyway.*?" not just "Quit anyway?". Tue May 18 17:13:20 1993 Fred Fish (fnf@cygnus.com) * gdb.t21/demangle.exp: Add a couple of new patterns. Ensure that all setup_xfails are immediately followed by clear_xfails. Tue May 11 09:10:47 1993 Fred Fish (fnf@cygnus.com) * config/unix-gdb.exp, gdb.t00/echo.exp, gdb.t00/help.exp, gdb.t00/teststrategy.exp, gdb.t00/gdbvars.exp, gdb.t01/run.exp, gdb.t01/term.exp, gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t06/break.exp, gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, gdb.t09/corefile.exp, gdb.t10/crossload.exp, gdb.t11/list.exp, gdb.t12/scope.exp, gdb.t13/bitfields.exp, gdb.t15/funcargs.exp, gdb.t16/printcmds.exp, gdb.t17/callfuncs.exp, gdb.t20/misc.exp, gdb.t20/inherit.exp, gdb.t20/classes.exp, gdb.t21/demangle.exp, gdb.t21/cplusfuncs.exp, gdb.t22/virtfunc.exp, gdb.t23/templates.exp, gdb.t30/chexp.exp, gdb.t31/chillvars.exp, lib/gdb.exp: Change place to report bugs from bug-dejagnu@prep.ai.mit.edu to bug-gdb@prep.ai.mit.edu. Fri May 7 09:15:35 1993 Fred Fish (fnf@cygnus.com) * gdb.t17/callfuncs.exp (do_function_calls): Call t_double_values with 0.0, not integer 0. Fri Apr 30 13:17:24 1993 Jim Kingdon (kingdon@cygnus.com) * gdb.t06/break.exp: Update for "Kill the program" message change. Fri Apr 30 09:42:57 1993 Fred Fish (fnf@cygnus.com) * Makefile.in (GDBFLAGS): Set to -nx. * Makefile.in (site.exp): Use GDBFLAGS. Wed Apr 28 13:19:07 1993 K. Richard Pixley (rich@rtl.cygnus.com) * */Makefile.in (CFLAGS): add CFLAGS = -g to all subdirectory Makefiles. (check): depend on just-check. (just-check): added so that tests can be run without a noop build pass. Fri Apr 23 18:13:28 1993 K. Richard Pixley (rich@rtl.cygnus.com) Switch to using configure's configdirs. * Makefile.in (Makefile): add configure.in dependency. (SUBDIRS): removed redundant assignment. * configure.in: switch subdirs assignment to configdirs. * gdb.t*/configure.in: new files. Thu Apr 22 08:27:53 1993 Ian Lance Taylor (ian@cygnus.com) * gdb.t07/watchpoint.exp: Removed a29k expected failure which now works. Tue Apr 20 13:38:40 1993 Fred Fish (fnf@cygnus.com) * gdb.{t20,t21,t22,t23}/Makefile.in: Use $(srcdir) to avoid $< in explicit rules. Apparently this is not supported by some makes. Mon Apr 19 01:54:53 1993 John Gilmore (gnu@cygnus.com) * gdb.t31/Makefile.in: Use $(srcdir) when avoiding $<, sigh. Fri Apr 16 09:33:46 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/unix-gdb.exp: Add back missing return 0 which mysteriously disappeared. Thu Apr 15 02:28:24 1993 John Gilmore (gnu@cacophony.cygnus.com) * gdb.t31/Makefile.in: Avoid $< in explicit rule. Wed Apr 14 16:38:47 1993 Fred Fish (fnf@cygnus.com) * gdb.t07/watchpoint.exp: Remove setup_xfail for i486 watchpoint problem that is now fixed. * gdb.t30/chexp.exp: Remove setup_xfail for printing uninitialized convenience variables. * gdb.t31/chillvars.exp: Fix expected patterns for printing structures. Wed Apr 14 12:55:58 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t00/help.exp: Compensate for bug in mips-*-ultrix* OS which causes expect to get out of sync with gdb on long output from help set. * gdb.t09/corefile.exp: Make expected pattern for core file failing signal and frame output format less sun specific. Tue Apr 13 23:18:07 1993 Per Bothner (bothner@cygnus.com) * gdb.t31/chillvars.exp: Add and remove initial dummy breakpoint, so that symbol table is forced in. (Needed at least on Sunos4, though it seems not SVR4.) * gdb.t31/chillvars.exp: Update for changed output format. Sun Apr 11 17:21:45 1993 Rob Savoye (rob at darkstar.cygnus.com) * config/unix-gdb.exp: Gracefully exits if $GDB is a bogus path. Wed Apr 7 21:28:21 1993 Rob Savoye (rob@cygnus.com) * Makefile.in: Added --srcdir when invoking runtest, removed the need for a local config file. (optional now) Wed Apr 7 14:13:41 1993 Fred Fish (fnf@cygnus.com) * gdb.t21/demangle.exp: Only count real fails (not xfails) for failure count used to force early termination. Add some more expected failures for gnu style demangling. Thu Apr 1 09:50:30 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * Makefile.in (CXXFLAGS): Remove -O. It caused the debug info for the pmi variable from gdb.t20/gdbme to get optimized away. * gdb.t00/teststrategy.exp: Added expected failure for mips-*-*. Check for written corefile upon timeout _and_ eof. Tue Mar 30 09:58:16 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/unix-gdb.exp: Add missing return 0. Tue Mar 30 08:34:25 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * gdb.t16/printcmds.exp: Remove misplaced xfail that caused an early test termination. Mon Mar 29 17:37:25 1993 Fred Fish (fnf@cygnus.com) * configure.in (subdirs): Put back gdb.t17 which mysteriously disappeared. Thu Mar 25 21:05:16 1993 Fred Fish (fnf@cygnus.com) * gdb.t10/crossload.exp: Disable the i860-elf test until such time as i860 support works. * gdb.t15/funcargs.exp: Fix expected outputs to include "backtrace 100\r" rather than just "backtrace\r", to match last change. Thu Mar 25 12:14:28 1993 Ian Lance Taylor (ian@cygnus.com) * config/udi-gdb.exp (gdb_exit): Remove close command. (gdb_target_udi): New procedure to set the UDI target. (gdb_start): Don't remove *_soc files. Use gdb_target_udi. * gdb.t00/default.exp: Added expected failures for a29k-*-udi. Added waits for prompts after several question responses. Added some more responses used by a29k-amd-udi-gdb. * gdb.t01/run.exp, gdb.t06/break.exp: Added a29k-*-udi support: pass different arguments, restart UDI connection after program completion. * gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, gdb.t11/list.exp, gdb.t12/scope.exp, gdb.t15/funcargs.exp, gdb.t16/printcmds.exp, gdb.t20/misc.exp, gdb.t21/cplusfuncs.exp: Added expected failures for a29k-*-*. * gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, gdb.t12/scope.exp, gdb.t13/bitfields.exp, gdb.t15/funcargs.exp, gdb.t16/printcmds.exp, gdb.t17/callfuncs.exp, gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t20/misc.exp, gdb.t22/virtfuncs.exp: Restart UDI connection after program completion. * gdb.t10/crossload.exp: Does not work for a29k-*-*, since BFD is compiled with a SELECT_VECS setting. * gdb.t15/funcargs.exp: Use argument to backtrace to prevent infinite recursion. * gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t22/virtfuncs.exp: Added checks for COFF results, and made them expected failures for all targets. It would be better to make them expected failures for COFF targets only. Wed Mar 24 14:43:38 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com) * Makefile.in: add null dvi target, don't bother to recurse through test directories for info and install-info; rename $(datadir) to be dejagnu instead of deja-gnu Wed Mar 24 09:48:03 1993 Fred Fish (fnf@cygnus.com) * gdb.t31/gdbme.ch: Re-enable code that previously caused compiler to coredump. * gdb.t31/chillvars.exp: Re-enable tests that depend on that code. Tue Mar 23 08:53:42 1993 Fred Fish (fnf@cygnus.com) * gdb.t31/gdbme.ch: Comment out code that causes chill compiler coredump. * gdb.t31/chillvars.exp: Comment out tests that depend on that code. Sun Mar 21 17:56:47 1993 Rob Savoye (rob at darkstar.cygnus.com) * gdb.t03/ptype.exp: tests for return code from gdb_test. * gdb.t00/teststrategy.exp: Uses which proc rather than spawning which in a shell. Deletes xgdb when done. * config/unix-gdb.exp: Won't try to spawn $GDB unless it exists. Tests the return from the "set height" or "set width" commands. Added a few return codes where needed. Wed Mar 17 11:31:01 1993 Fred Fish (fnf@cygnus.com) * Makefile.in (SUBDIRS): Add gdb.t17. * configure.in (subdirs): Add gdb.t17. * gdb.t17/{Makefile.in, callfuncs.exp, gdbme.c}: New test files to test gdb's calling of functions in the inferior with the correct arguments and gdb's ability to retrieve any result returned. Tue Mar 16 15:37:11 1993 Fred Fish (fnf@cygnus.com) * config/unix-gdb.exp (gdb_exit): Remove close commands that may be called after gdb goes away. Previous versions of expect needed these to avoid file descriptor leaks, but they cause errors with the current revision of expect. * gdb.t00/gdbvars.exp: Use -re on expected output after setting sevenbit-strings. * gdb.t04/setvar.exp, gdb.t13/bitfields.exp: Make commands to set sevenbit-strings consistent across tests. gdb.t30/chexp.exp, gdb.t31/chillvars.exp: Make commands to set sevenbit-strings consistent across tests. Fri Mar 12 08:47:20 1993 Fred Fish (fnf@cygnus.com) * gdb.t21/demangle.exp (proc demangle): Adjust quotes in an expected output to match current "expect" expectations. Wed Mar 10 18:01:49 1993 Fred Fish (fnf@cygnus.com) * gdb.t00/default.exp: Change expected output for default "source" command, to match new gdb behavior which requires a filename to source. Tue Mar 9 11:00:56 1993 Fred Fish (fnf@cygnus.com) * gdb.t07/watchpoint.exp (test_simple_watchpoint): Set up expected fail for i486-*-* that misses the marker2 function. * gdb.t10/crossload.exp (bfddefault): Allow successful recognition of a format to pass even if no symbols are found. Explicitly catch failures where the format is not recognized or is ambiguous, and add the reason to the fail message. * gdb.t10/crossload.exp (bfdexplicit): Catch failure where the cause is and invalid target and add reason to failure message. * gdb.t10/crossload.exp: Fix bfd target names for elf32-m68k, elf32-i386, elf32-sparc, and elf32-i860. * gdb.t12/scope.exp (test_at_main, test_at_foo, test_at_bar): Set up expected failure for 'filename'::variable scope resolution, which is now apparently broken on all targets. * gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t20/misc.exp, gdb.t21/cplusfuncs.exp, gdb.t22/virtfunc.exp, gdb.t23/templates.exp: Change failure for missing binfile into just a warning. gdb.t21/demangle.exp: Change all cfront references to 'arm' references. Mon Mar 8 19:20:28 1993 Fred Fish (fnf@cygnus.com) * gdb.t00/default.exp: Add expected output for default "source" command, to match new gdb behavior. * gdb.t09/corefile.exp: Use GDBFLAGS when spawning GDB. Sun Mar 7 15:14:09 1993 Rob Savoye (rob@cygnus.com) * config/*-gdb.exp: returns an error, rather than exiting on internal errors. Tue Mar 2 18:09:32 1993 Fred Fish (fnf@cygnus.com) * gdb.t03/gdbme.c: Add pointer to struct variable. * gdb.t03/ptype.exp: Test equivalence of '.' and '->' for referencing struct members. Thu Feb 25 10:39:06 1993 Ian Lance Taylor (ian@cygnus.com) * configure.in (mips-idt-ecoff): New target. * config/mips-gdb.exp: New file for remote board using MIPS remote debugging protocol. * Redid configuration scheme. Removed gdb.t*/configure.in. Renamed gdb.t*/in-gdbme* to gdb.t*/gdbme*. Changed to use CC, CXX instead of CC_FOR_TARGET, CXX_FOR_TARGET. Added mostlyclean and distclean targets. Built executables via .o files. Adjusted tests to account for source files in $(srcdir) rather than $(objdir). * lib/gdb.exp (runto): Don't expect () after the function name, because it may have arguments. Wed Feb 24 08:05:38 1993 Ian Lance Taylor (ian@cygnus.com) * gdb.t00/default.exp, gdb.t01/run.exp, gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t06/break.exp, gdb.t12/scope.exp: Added expected failures for mips-idt-* and mips-sgi-*. * gdb.t00/default.exp (attach): Kill process if requested. * gdb.t00/help.exp (help target core, help target): Accept a gdb that does not read core files. * gdb.t01/run.exp: Removed checks for exit status code. * gdb.t03/in-gdbme.c: Make explicit call to malloc to ensure that it is linked in. * gdb.t03/ptype.exp: Increase timeout when calling malloc. * gdb.t04/setvar.exp, gdb.t05/expr.exp: Use runto function where appropriate, rather than doing it by hand. * gdb.t07/watchpoint.exp: If mips-idt-*, reload file after first execution. * gdb.t10/crossload.exp: Kill existing program if needed. * gdb.t15/funcargs.exp: Use delete_breakpoints function where appropriate, rather than doing it by hand. Always increase timeout for this test, not just for VxWorks. Wed Feb 24 08:03:38 1993 Fred Fish (fnf@cygnus.com) * gdb.t31/chillvars.exp (test_structs): New proc to test printing of Chill STRUCT types and STRUCT values. * gdb.t31/chillvars.exp (test_strings): Expect "CHAR" now, rather than "char". * gdb.t31/in-gdbme.ch (simple_struct, nested_struct, struct1, struct2): New struct definitions and initializations to test simple Chill STRUCT types. Tue Feb 23 11:55:06 1993 Fred Fish (fnf@cygnus.com) * gdb.t00/teststrategy.exp: Track reversion in gdb to not print the null byte at the end of strings. * gdb.t00/default.exp: Make show version insensitive to copyright date. * gdb.t16/in-gdbme.c (ctable1, ctable2): Make explicitly unsigned to avoid dependencies on target char signedness. * gdb.t16/printcmds.exp: Update expected results for explicitly unsigned char. * gdb.t16/printcmds.exp: Remove setup_xfails for i960 that should now work. * gdb.t21/demangle.exp: Add many more patterns for template demangling, most of them being expected failures. * gdb.t21/demangle.exp (proc demangle): Quote the demangled string we are matching for, to match on the whole string. * gdb.t21/demangle.exp: Add many new test strings to demangle, and fix a whole bunch that had incorrect expected output but were passing anyway because of the bug in "proc demangle". * gdb.t31/chillvars.exp: Remove setup_xfail for printing string type. * gdb.t31/in-gdbme.ch: Uncomment string4, now compiles. Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com) * gdb/testsuite: made modifications to testcases, etc., to allow them to work properly given the reorganization of deja-gnu and the relocation of the testcases from deja-gnu to a "tool" subdirectory. Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com) * gdb/testsuite: Initial creation of gdb/testsuite. Migrated dejagnu testcases and support files for testing nm to gdb/testsuite from deja-gnu. These files were moved "as is" with no modifications. This migration is part of a major overhaul of dejagnu. The modifications to these testcases, etc., which will allow them to work with the new version of dejagnu will be made in a future update. Local Variables: mode: indented-text left-margin: 8 fill-column: 74 version-control: never End: