Wed Aug 27 18:13:22 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Tue Aug 26 10:38:20 1997 Andrew Cagney * float.c (__setfpucw): Compile on any i386 target. Not just NT. * interf.c (sim_kill): Delete. (sim_create_inferior): Add ABFD argument. Initialize PC from ABFD argument. (sim_load): Don't save start address. (start_address): Delete variable. Mon Aug 25 17:50:22 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Mon Aug 25 16:19:49 1997 Andrew Cagney * interf.c (sim_open): Add ABFD argument. Change ARGV to PARGV. Mon Jun 30 11:45:25 1997 Doug Evans * Makefile.in (install-sis): Change $(srcdir)/sis to sis. Wed May 28 09:46:13 1997 Andrew Cagney * interf.c (sim_set_callbacks): Drop SD argument - not applicable. (sim_open): Add callback arg, save it. Thu Apr 24 00:39:51 1997 Doug Evans * configure: Regenerated to track ../common/aclocal.m4 changes. Tue Apr 22 11:05:01 1997 Doug Evans * interf.c (sim_open): Undo patch to add -E support. Thu Apr 17 03:03:56 1997 Doug Evans * interf.c (sim_open): Ignore -E arg. (start_address): New static local. (sim_load): Return SIM_RC. New arg abfd. Set start_address from bfd. (sim_create_inferior): Return SIM_RC. Delete arg start_address. Tue Apr 15 15:16:11 1997 Ian Lance Taylor * Makefile.in (install-sis): Depend upon installdirs. Use $(program_transform_name) directly, rather than using $(INSTALL_XFORM). Mon Apr 7 15:45:02 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Wed Apr 2 15:06:28 1997 Doug Evans * interf.c (sim_open): New arg `kind'. * configure: Regenerated to track ../common/aclocal.m4 changes. Wed Apr 2 14:34:19 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Mon Mar 17 15:10:07 1997 Andrew Cagney * configure: Re-generate. Thu Mar 13 12:46:04 1997 Doug Evans * interf.c (sim_open): New SIM_DESC result. Argument is now in argv form. (other sim_*): New SIM_DESC argument. Tue Feb 4 13:35:20 1997 Doug Evans * Makefile.in (@COMMON_MAKEFILE_FRAG): Use COMMON_{PRE,POST}_CONFIG_FRAG instead. * configure.in: sinclude ../common/aclocal.m4. * configure: Regenerated. Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com) * configure configure.in Makefile.in: Update to new configure scheme which is more compatible with WinGDB builds. * configure.in: Improve comment on how to run autoconf. * configure: Re-run autoconf to get new ../common/aclocal.m4. * Makefile.in: Use autoconf substitution to install common makefile fragment. Wed Dec 4 18:25:04 1996 Rob Savoye * interf.c (run_sim): Stop the simulator and reset the stdio after breakpoints. Tue Dec 3 11:54:37 1996 Rob Savoye * configure.in: Look for libtermcap.a. * Makefile.in: Only link in -ltermcap if it exists. * erc32.c: Update to version 2.6a. Fix uart handling. * exec.c: Update to version 2.6a. Add sparclite support. * float.c: Update to version 2.6a. Convert comments to preprocessor warnings. Add __setfpucw() for i385 hosts so floating point exceptions work on win32. * func.c: Update to version 2.6a. Fix uart handling, add support for user error traps. * help.c: Update to version 2.6a. Add help note on user error traps. * interf.c: Update to version 2.6a. Fix uart handling, and add sparclite support. * examples/gccx: Use sparclite cross compiler, not native gcc. * examples/srt0.S: Use "mov" rather than "wr" for manipulating the psr register. Mon Nov 25 08:28:10 1996 Fred Fish * Makefile.in (run.o): Remove this rule, it hides the one in ../common/Make-common.in that correctly references the source in the sibling ../common directory. Wed Nov 20 01:30:12 1996 Doug Evans * Makefile.in: Delete stuff moved to ../common/Make-common.in. (SIM_{OBJS,EXTRA_LIBS,EXTRA_LIBDEPS,EXTRA_ALL,EXTRA_INSTALL}): Define. (SIM_{EXTRA_CLEAN,EXTRA_CFLAGS}): Define. * configure.in: Simplify using macros in ../common/aclocal.m4. Call AC_CHECK_HEADERS(stdlib.h). * configure: Regenerated. * config.in: New file. * func.c (sim_set_callbacks): Delete, moved to * interf.c (sim_set_callbacks): here. (sim_callback): New global. Rewrite all calls to printf_filtered to go through callback. (sim_size,sim_trace): New functions. (sim_{insert,remove}_breakpoint): #if 0 out. * sis.c: #include "config.h". #include if present. (main): Coerce fprintf arg to INIT_DISASSEMBLE_INFO to fprintf_ftype. * sis.h: #include "callback.h". * run.c: Deleted, using one in ../common now. Thu Oct 3 16:12:03 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) * Makefile.in (clean): Move config.log to distclean. Wed Oct 2 16:57:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) * Makefile.in (clean): Also remove config.log. Sat Sep 14 00:00:46 1996 Ian Lance Taylor * Makefile.in (CC_FOR_BUILD): New variable. (AR, AR_FLAGS, BISON, MAKEINFO): Remove duplicate variables. (RANLIB, CC): Likewise. (end): Use $(CC_FOR_BUILD), not $(CC). * configure.in: Set CC_FOR_BUILD. * configure: Rebuild. Sun Sep 8 14:04:37 1996 Stu Grossman (grossman@critters.cygnus.com) * erc32.c (port_init): Disable this for __GO32__ (got no pty's there either...). Mon Aug 12 17:04:58 1996 Stu Grossman (grossman@critters.cygnus.com) * erc32.c: Don't include sys/ioctl.h or sys/file.h. They aren't necessary. * (port_init): Don't even *try* to open pty's under _WIN32. * Use SIM_ADDR, not caddr_t for declaring vars that hold addresses. * float.c: Get rid of #warning. Makes Microsoft C barf. * interf.c (sim_open): Cast fprintf to (fprintf_ftype) to fix compiler warning. * (sim_load sim_create_inferior sim_read): Use prototypes only in decls, not defs. * Get rid of enum sim_stop. It's defined in remote-sim.h. * (sim_stop_reason): Define SIGTRAP if _WIN32. * sis.h: Include ansidecl.h and remote-sim.h. Wed Jul 3 16:05:23 1996 Stu Grossman (grossman@critters.cygnus.com) * erc32.c (mec_reset mec_read mec_write memory_read memory_write), sis.h: Get rid of all uses of long long's. * (close_port read_uart write_uart uarta_tx): Don't seg fault when can't open pty's. * exec.c: Add two new instructions: smul, and divscc. * interf.c (flush_windows): New routine to flush the register windows out to the stack just before returning to GDB. Makes backtraces work much better. Wed Jun 26 12:19:11 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir, INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values. (docdir, oldincludedir): Removed. * configure.in (AC_PREREQ): autoconf 2.5 or higher. (AC_PROG_INSTALL): Added. * configure: Rebuilt. Mon Jun 24 14:19:07 1996 Ian Lance Taylor * configure.in: Call AC_PROG_CC before running configure.host. * configure: Rebuild with autoconf 2.10. Tue Jun 4 10:37:12 1996 Tom Tromey * Makefile.in (install): Don't check to see if tooldir exists. Make $(tooldir) and $(tooldir)/bin. Mon Jun 3 12:33:38 1996 Ian Lance Taylor * Makefile.in (end.h): Use explicit ./ when running end. Sun May 19 21:05:31 1996 Rob Savoye * func.c(bfd_load): Don't try to print the filename if the pfbd is NULL. * interf.c(sim_load): Pass the whole string, not just the first byte. Version 2.1 26-02-96 -------------------- * Fixed bug in "go" command. version 2.0 05-02-96 -------------------- * Fixed bug in interrupt force register (erc32.c). * Change file load function to use bfd_openr. * SIS should now be endian independent. version 1.8 24-11-95 -------------------- * Fixed FPU timing - some sequences of FPU instructions did not calculate the resource dependencies right. * Corrected STDFQ when qne = 0 (again!). The ftt is set to sequence_error but no FPU trap is generated. version 1.7.1 31-10-95 -------------------- * Corrected STDFQ when qne = 0. Now, a trap is immidiately generated but the FPU stays in execute mode. * Corrected JMPL and RETT timing (these instructions takes two cycles). version 1.7 25-10-95 -------------------- * Interrupt during annuled instruction corrupted return address - fixed. version 1.6.2 25-10-95 -------------------- * Added -DFAST_UART to Makefile version 1.6.1 24-10-95 -------------------- * Fixed bug in STDFQ which caused bus error version 1.6 02-10-95 -------------------- * Modified srt0.s to include code that initiates registers in IU and FPU and initializes the data segment. The simulator 'load' command does not longer initialize the data segment! * Corrected MEC timer operation; scalers now divide the frequency by (scaler_value + 1). * MEC breakpoints are not checked during store operation version 1.5 14-09-95 -------------------- * Fixed some bugs in the cycle counting for IU & FPU instructions. * Fixed bug that allowed an annuled instruction to cause memory exception. * The *ws parameter in mem.c should now contain the number of waitstates required by the memory access (was total number of cycles). * The supplied srt0.s now clears the BSS (thanks Joel). version 1.4 22-08-95 -------------------- * Added a '-g' switch to enable/disable the GNU readline(), which cause some problems on solaris 2.x machines. * Enabled MEC watchpoint and breakpoint function to mem.c. Performance may suffer a bit ... NOTE: The UARTs are now connected to /dev/ttypc and /dev/ttypd. version 1.3 26-07-95 -------------------- * Fixed bug in mulscc instruction (how could that ever have worked?) * Fixed bug in UART B (flushed characters on UART A), thanks Paul. version 1.2 13-07-95 -------------------- * Fixed bug in interrupt handling (wrong interrupt selected when more that one interrupt pending) * Fixed updating of condition codes during logical instructions (carry and overflow were not reset) * Fixed bug in WRTBR (tt field was wrongly over-written) version 1.1 07-07-95 -------------------- * Fixed several bugs in the interrupt handler and callback routines. (reported by Paul Warren, Alsys)