+ [delta_disks <N>]
+ The delta_disks option value (-251 < N < +251) triggers
+ device removal (negative value) or device addition (positive
+ value) to any reshape supporting raid levels 4/5/6 and 10.
+ RAID levels 4/5/6 allow for addition of devices (metadata
+ and data device tupel), raid10_near and raid10_offset only
+ allow for device addtion. raid10_far does not support any
+ reshaping at all.
+ A minimum of devices have to be kept to enforce resilience,
+ which is 3 devices for raid4/5 and 4 devices for raid6.
+
+ [data_offset <sectors>]
+ This option value defines the offset into each data device
+ where the data starts. This is used to provide out-of-place
+ reshaping space to avoid writing over data whilst
+ changing the layout of stripes, hence an interruption/crash
+ may happen at any time without the risk of losing data.
+ E.g. when adding devices to an existing raid set during
+ forward reshaping, the out-of-place space will be allocated
+ at the beginning of each raid device. The kernel raid4/5/6/10
+ MD personalities supporting such device addition will read the data from
+ the existing first stripes (those with smaller number of stripes)
+ starting at data_offset to fill up a new stripe with the larger
+ number of stripes, calculate the redundancy blocks (CRC/Q-syndrome)
+ and write that new stripe to offset 0. Same will be applied to all
+ N-1 other new stripes. This out-of-place scheme is used to change
+ the RAID type (i.e. the allocation algorithm) as well, e.g.
+ changing from raid5_ls to raid5_n.
+