bfd
[deliverable/binutils-gdb.git] / bfd / section.c
index ab3bb51627e8999440868ca6602d213f42ab0510..89f8126536cb45dc6b38c66c3cb4f292e89840f7 100644 (file)
@@ -1,5 +1,7 @@
 /* Object file "section" support for the BFD library.
 /* Object file "section" support for the BFD library.
-   Copyright (C) 1990-1991 Free Software Foundation, Inc.
+   Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+   2000, 2001, 2002, 2003
+   Free Software Foundation, Inc.
    Written by Cygnus Support.
 
 This file is part of BFD, the Binary File Descriptor library.
    Written by Cygnus Support.
 
 This file is part of BFD, the Binary File Descriptor library.
@@ -16,82 +18,89 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
 
 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 
 /*
 SECTION
        Sections
 
 
 /*
 SECTION
        Sections
 
-       Sections are supported in BFD in <<section.c>>.
-
        The raw data contained within a BFD is maintained through the
        section abstraction.  A single BFD may have any number of
        The raw data contained within a BFD is maintained through the
        section abstraction.  A single BFD may have any number of
-       sections, and keeps hold of them by pointing to the first,
+       sections.  It keeps hold of them by pointing to the first;
        each one points to the next in the list.
 
        each one points to the next in the list.
 
+       Sections are supported in BFD in <<section.c>>.
+
 @menu
 @menu
-* Section Input::
-* Section Output::
-* typedef asection::
-* section prototypes::
+@* Section Input::
+@* Section Output::
+@* typedef asection::
+@* section prototypes::
 @end menu
 
 INODE
 @end menu
 
 INODE
-       Section Input, Section Output, Sections, Sections
-
+Section Input, Section Output, Sections, Sections
 SUBSECTION
 SUBSECTION
-       Section Input
+       Section input
 
        When a BFD is opened for reading, the section structures are
        created and attached to the BFD.
 
        Each section has a name which describes the section in the
 
        When a BFD is opened for reading, the section structures are
        created and attached to the BFD.
 
        Each section has a name which describes the section in the
-       outside world - for example, <<a.out>> would contain at least
-       three sections, called <<.text>>, <<.data>> and <<.bss>>. 
+       outside world---for example, <<a.out>> would contain at least
+       three sections, called <<.text>>, <<.data>> and <<.bss>>.
+
+       Names need not be unique; for example a COFF file may have several
+       sections named <<.data>>.
 
 
-       Sometimes a BFD will contain more than the 'natural' number of
+       Sometimes a BFD will contain more than the ``natural'' number of
        sections. A back end may attach other sections containing
        constructor data, or an application may add a section (using
        sections. A back end may attach other sections containing
        constructor data, or an application may add a section (using
-       bfd_make_section) to the sections attached to an already open
-       BFD. For example, the linker creates a supernumary section
+       <<bfd_make_section>>) to the sections attached to an already open
+       BFD. For example, the linker creates an extra section
        <<COMMON>> for each input file's BFD to hold information about
        common storage.
 
        <<COMMON>> for each input file's BFD to hold information about
        common storage.
 
-       The raw data is not necessarily read in at the same time as
+       The raw data is not necessarily read in when
        the section descriptor is created. Some targets may leave the
        data in place until a <<bfd_get_section_contents>> call is
        the section descriptor is created. Some targets may leave the
        data in place until a <<bfd_get_section_contents>> call is
-       made. Other back ends may read in all the data at once - For
-       example; an S-record file has to be read once to determine the
+       made. Other back ends may read in all the data at once For
+       example, an S-record file has to be read once to determine the
        size of the data. An IEEE-695 file doesn't contain raw data in
        sections, but data and relocation expressions intermixed, so
        the data area has to be parsed to get out the data and
        relocations.
 
 INODE
        size of the data. An IEEE-695 file doesn't contain raw data in
        sections, but data and relocation expressions intermixed, so
        the data area has to be parsed to get out the data and
        relocations.
 
 INODE
-       Section Output, typedef asection, Section Input, Sections
+Section Output, typedef asection, Section Input, Sections
 
 SUBSECTION
 
 SUBSECTION
-       Section Output
+       Section output
 
        To write a new object style BFD, the various sections to be
        written have to be created. They are attached to the BFD in
 
        To write a new object style BFD, the various sections to be
        written have to be created. They are attached to the BFD in
-       the same way as input sections, data is written to the
-       sections using <<bfd_set_section_contents>>.  
-
-       The linker uses the fields <<output_section>> and
-       <<output_offset>> to create an output file.
-
-       The data to be written comes from input sections attached to
+       the same way as input sections; data is written to the
+       sections using <<bfd_set_section_contents>>.
+
+       Any program that creates or combines sections (e.g., the assembler
+       and linker) must use the <<asection>> fields <<output_section>> and
+       <<output_offset>> to indicate the file sections to which each
+       section must be written.  (If the section is being created from
+       scratch, <<output_section>> should probably point to the section
+       itself and <<output_offset>> should probably be zero.)
+
+       The data to be written comes from input sections attached
+       (via <<output_section>> pointers) to
        the output sections.  The output section structure can be
        the output sections.  The output section structure can be
-       considered a filter for the input section, the output section
+       considered a filter for the input section: the output section
        determines the vma of the output data and the name, but the
        input section determines the offset into the output section of
        the data to be written.
 
        determines the vma of the output data and the name, but the
        input section determines the offset into the output section of
        the data to be written.
 
-       Eg to create a section "O", starting at 0x100, 0x123 long,
-       containing two subsections, "A" at offset 0x0 (ie at vma
-       0x100) and "B" at offset 0x20 (ie at vma 0x120) the structures
-       would look like:
+       E.g., to create a section "O", starting at 0x100, 0x123 long,
+       containing two subsections, "A" at offset 0x0 (i.e., at vma
+       0x100) and "B" at offset 0x20 (i.e., at vma 0x120) the <<asection>>
+       structures would look like:
 
 |   section name          "A"
 |     output_offset   0x00
 
 |   section name          "A"
 |     output_offset   0x00
@@ -103,470 +112,1032 @@ SUBSECTION
 |     size            0x103   |
 |     output_section  --------|
 
 |     size            0x103   |
 |     output_section  --------|
 
+SUBSECTION
+       Link orders
 
 
-*/
+       The data within a section is stored in a @dfn{link_order}.
+       These are much like the fixups in <<gas>>.  The link_order
+       abstraction allows a section to grow and shrink within itself.
+
+       A link_order knows how big it is, and which is the next
+       link_order and where the raw data for it is; it also points to
+       a list of relocations which apply to it.
+
+       The link_order is used by the linker to perform relaxing on
+       final code.  The compiler creates code which is as big as
+       necessary to make it work without relaxing, and the user can
+       select whether to relax.  Sometimes relaxing takes a lot of
+       time.  The linker runs around the relocations to see if any
+       are attached to data which can be shrunk, if so it does it on
+       a link_order by link_order basis.
 
 
+*/
 
 #include "bfd.h"
 #include "sysdep.h"
 #include "libbfd.h"
 
 #include "bfd.h"
 #include "sysdep.h"
 #include "libbfd.h"
+#include "bfdlink.h"
 
 /*
 
 /*
+DOCDD
 INODE
 INODE
-       typedef asection, section prototypes, Section Output, Sections
-SUBSECTION
-       typedef asection
-
+typedef asection, section prototypes, Section Output, Sections
 SUBSECTION
        typedef asection
 
 SUBSECTION
        typedef asection
 
-       The shape of a section struct:
+       Here is the section structure:
 
 CODE_FRAGMENT
 .
 
 CODE_FRAGMENT
 .
-.typedef struct sec 
+.{* This structure is used for a comdat section, as in PE.  A comdat
+.   section is associated with a particular symbol.  When the linker
+.   sees a comdat section, it keeps only one of the sections with a
+.   given name and associated with a given symbol.  *}
+.
+.struct bfd_comdat_info
 .{
 .{
-.        {* The name of the section, the name isn't a copy, the pointer is
-.        the same as that passed to bfd_make_section. *}
+.  {* The name of the symbol associated with a comdat section.  *}
+.  const char *name;
+.
+.  {* The local symbol table index of the symbol associated with a
+.     comdat section.  This is only meaningful to the object file format
+.     specific code; it is not an index into the list returned by
+.     bfd_canonicalize_symtab.  *}
+.  long symbol;
+.};
 .
 .
-.    CONST char *name;
+.typedef struct sec
+.{
+.  {* The name of the section; the name isn't a copy, the pointer is
+.     the same as that passed to bfd_make_section.  *}
+.  const char *name;
 .
 .
-.        {* The next section in the list belonging to the BFD, or NULL. *}
+.  {* A unique sequence number.  *}
+.  int id;
 .
 .
-.    struct sec *next;
+.  {* Which section in the bfd; 0..n-1 as sections are created in a bfd.  *}
+.  int index;
 .
 .
-.        {* The field flags contains attributes of the section. Some of
-.           flags are read in from the object file, and some are
-.           synthesized from other information.  *}         
+.  {* The next section in the list belonging to the BFD, or NULL.  *}
+.  struct sec *next;
 .
 .
-.    flagword flags;
+.  {* The field flags contains attributes of the section. Some
+.     flags are read in from the object file, and some are
+.     synthesized from other information.  *}
+.  flagword flags;
 .
 .#define SEC_NO_FLAGS   0x000
 .
 .
 .#define SEC_NO_FLAGS   0x000
 .
-.        {* Tells the OS to allocate space for this section when loaded.
-.           This would clear for a section containing debug information
-.           only. *}
-.          
-.
+.  {* Tells the OS to allocate space for this section when loading.
+.     This is clear for a section containing debug information only.  *}
 .#define SEC_ALLOC      0x001
 .#define SEC_ALLOC      0x001
-.        {* Tells the OS to load the section from the file when loading.
-.           This would be clear for a .bss section *}
 .
 .
+.  {* Tells the OS to load the section from the file when loading.
+.     This is clear for a .bss section.  *}
 .#define SEC_LOAD       0x002
 .#define SEC_LOAD       0x002
-.        {* The section contains data still to be relocated, so there will
-.           be some relocation information too. *}
 .
 .
+.  {* The section contains data still to be relocated, so there is
+.     some relocation information too.  *}
 .#define SEC_RELOC      0x004
 .
 .#define SEC_RELOC      0x004
 .
-.        {* Obsolete ? *}
+.  {* ELF reserves 4 processor specific bits and 8 operating system
+.     specific bits in sh_flags; at present we can get away with just
+.     one in communicating between the assembler and BFD, but this
+.     isn't a good long-term solution.  *}
+.#define SEC_ARCH_BIT_0 0x008
 .
 .
-.#define SEC_BALIGN     0x008
-.
-.        {* A signal to the OS that the section contains read only
-.          data. *}
+.  {* A signal to the OS that the section contains read only data.  *}
 .#define SEC_READONLY   0x010
 .
 .#define SEC_READONLY   0x010
 .
-.        {* The section contains code only. *}
-.
+.  {* The section contains code only.  *}
 .#define SEC_CODE       0x020
 .
 .#define SEC_CODE       0x020
 .
-.        {* The section contains data only. *}
-.
-.#define SEC_DATA        0x040
-.
-.        {* The section will reside in ROM. *}
+.  {* The section contains data only.  *}
+.#define SEC_DATA       0x040
 .
 .
+.  {* The section will reside in ROM.  *}
 .#define SEC_ROM        0x080
 .
 .#define SEC_ROM        0x080
 .
-.        {* The section contains constructor information. This section
-.           type is used by the linker to create lists of constructors and
-.           destructors used by <<g++>>. When a back end sees a symbol
-.           which should be used in a constructor list, it creates a new
-.           section for the type of name (eg <<__CTOR_LIST__>>), attaches
-.           the symbol to it and builds a relocation. To build the lists
-.           of constructors, all the linker has to to is catenate all the
-.           sections called <<__CTOR_LIST__>> and relocte the data
-.           contained within - exactly the operations it would peform on
-.           standard data. *}
-.
+.  {* The section contains constructor information. This section
+.     type is used by the linker to create lists of constructors and
+.     destructors used by <<g++>>. When a back end sees a symbol
+.     which should be used in a constructor list, it creates a new
+.     section for the type of name (e.g., <<__CTOR_LIST__>>), attaches
+.     the symbol to it, and builds a relocation. To build the lists
+.     of constructors, all the linker has to do is catenate all the
+.     sections called <<__CTOR_LIST__>> and relocate the data
+.     contained within - exactly the operations it would peform on
+.     standard data.  *}
 .#define SEC_CONSTRUCTOR 0x100
 .
 .#define SEC_CONSTRUCTOR 0x100
 .
-.        {* The section is a constuctor, and should be placed at the
-.          end of the . *}
-.
-.
-.#define SEC_CONSTRUCTOR_TEXT 0x1100
-.
-.#define SEC_CONSTRUCTOR_DATA 0x2100
-.
-.#define SEC_CONSTRUCTOR_BSS  0x3100
-.
-.
-.        {* The section has contents - a bss section could be
-.           <<SEC_ALLOC>> | <<SEC_HAS_CONTENTS>>, a debug section could be
-.           <<SEC_HAS_CONTENTS>> *}
-.
+.  {* The section has contents - a data section could be
+.     <<SEC_ALLOC>> | <<SEC_HAS_CONTENTS>>; a debug section could be
+.     <<SEC_HAS_CONTENTS>>  *}
 .#define SEC_HAS_CONTENTS 0x200
 .
 .#define SEC_HAS_CONTENTS 0x200
 .
-.        {* An instruction to the linker not to output sections
-.          containing this flag even if they have information which
-.          would normally be written. *}
-.
+.  {* An instruction to the linker to not output the section
+.     even if it has information which would normally be written.  *}
 .#define SEC_NEVER_LOAD 0x400
 .
 .#define SEC_NEVER_LOAD 0x400
 .
-.        {* The base address of the section in the address space of the
-.          target. *}
-.       
-.   bfd_vma vma;
-.
-.        {* The size of the section in bytes of the loaded section. This
-.           contains a value even if the section has no contents (eg, the
-.           size of <<.bss>>). *}
-.
-.   bfd_size_type size;    
-.
-.        {* If this section is going to be output, then this value is the
-.           offset into the output section of the first byte in the input
-.           section. Eg, if this was going to start at the 100th byte in
-.           the output section, this value would be 100. *}
-.
-.   bfd_vma output_offset;
-.
-.        {* The output section through which to map on output. *}
-.
-.   struct sec *output_section;
-.
-.        {* The alignment requirement of the section, as an exponent - eg
-.           3 aligns to 2^3 (or 8) *}
-.
-.   unsigned int alignment_power;
-.
-.        {* If an input section, a pointer to a vector of relocation
-.           records for the data in this section. *}
-.
-.   struct reloc_cache_entry *relocation;
-.
-.        {* If an output section, a pointer to a vector of pointers to
-.           relocation records for the data in this section. *}
-.
-.   struct reloc_cache_entry **orelocation;
-.
-.        {* The number of relocation records in one of the above  *}
-.
-.   unsigned reloc_count;
-.
-.        {* Which section is it 0.nth      *}
-.
-.   int index;                      
-.
-.        {* Information below is back end specific - and not always used
-.           or updated 
-.
-.           File position of section data    *}
-.
-.   file_ptr filepos;      
-.        
-.        {* File position of relocation info *}
-.
-.   file_ptr rel_filepos;
-.
-.        {* File position of line data       *}
-.
-.   file_ptr line_filepos;
-.
-.        {* Pointer to data for applications *}
-.
-.   PTR userdata;
-.
-.   struct lang_output_section *otheruserdata;
-.
-.        {* Attached line number information *}
-.
-.   alent *lineno;
-.        
-.        {* Number of line number records   *}
-.
-.   unsigned int lineno_count;
-.
-.        {* When a section is being output, this value changes as more
-.           linenumbers are written out *}
+.  {* The section is a COFF shared library section.  This flag is
+.     only for the linker.  If this type of section appears in
+.     the input file, the linker must copy it to the output file
+.     without changing the vma or size.  FIXME: Although this
+.     was originally intended to be general, it really is COFF
+.     specific (and the flag was renamed to indicate this).  It
+.     might be cleaner to have some more general mechanism to
+.     allow the back end to control what the linker does with
+.     sections.  *}
+.#define SEC_COFF_SHARED_LIBRARY 0x800
+.
+.  {* The section contains thread local data.  *}
+.#define SEC_THREAD_LOCAL 0x1000
+.
+.  {* The section has GOT references.  This flag is only for the
+.     linker, and is currently only used by the elf32-hppa back end.
+.     It will be set if global offset table references were detected
+.     in this section, which indicate to the linker that the section
+.     contains PIC code, and must be handled specially when doing a
+.     static link.  *}
+.#define SEC_HAS_GOT_REF 0x4000
+.
+.  {* The section contains common symbols (symbols may be defined
+.     multiple times, the value of a symbol is the amount of
+.     space it requires, and the largest symbol value is the one
+.     used).  Most targets have exactly one of these (which we
+.     translate to bfd_com_section_ptr), but ECOFF has two.  *}
+.#define SEC_IS_COMMON 0x8000
+.
+.  {* The section contains only debugging information.  For
+.     example, this is set for ELF .debug and .stab sections.
+.     strip tests this flag to see if a section can be
+.     discarded.  *}
+.#define SEC_DEBUGGING 0x10000
+.
+.  {* The contents of this section are held in memory pointed to
+.     by the contents field.  This is checked by bfd_get_section_contents,
+.     and the data is retrieved from memory if appropriate.  *}
+.#define SEC_IN_MEMORY 0x20000
+.
+.  {* The contents of this section are to be excluded by the
+.     linker for executable and shared objects unless those
+.     objects are to be further relocated.  *}
+.#define SEC_EXCLUDE 0x40000
+.
+.  {* The contents of this section are to be sorted based on the sum of
+.     the symbol and addend values specified by the associated relocation
+.     entries.  Entries without associated relocation entries will be
+.     appended to the end of the section in an unspecified order.  *}
+.#define SEC_SORT_ENTRIES 0x80000
+.
+.  {* When linking, duplicate sections of the same name should be
+.     discarded, rather than being combined into a single section as
+.     is usually done.  This is similar to how common symbols are
+.     handled.  See SEC_LINK_DUPLICATES below.  *}
+.#define SEC_LINK_ONCE 0x100000
+.
+.  {* If SEC_LINK_ONCE is set, this bitfield describes how the linker
+.     should handle duplicate sections.  *}
+.#define SEC_LINK_DUPLICATES 0x600000
+.
+.  {* This value for SEC_LINK_DUPLICATES means that duplicate
+.     sections with the same name should simply be discarded.  *}
+.#define SEC_LINK_DUPLICATES_DISCARD 0x0
+.
+.  {* This value for SEC_LINK_DUPLICATES means that the linker
+.     should warn if there are any duplicate sections, although
+.     it should still only link one copy.  *}
+.#define SEC_LINK_DUPLICATES_ONE_ONLY 0x200000
+.
+.  {* This value for SEC_LINK_DUPLICATES means that the linker
+.     should warn if any duplicate sections are a different size.  *}
+.#define SEC_LINK_DUPLICATES_SAME_SIZE 0x400000
+.
+.  {* This value for SEC_LINK_DUPLICATES means that the linker
+.     should warn if any duplicate sections contain different
+.     contents.  *}
+.#define SEC_LINK_DUPLICATES_SAME_CONTENTS 0x600000
+.
+.  {* This section was created by the linker as part of dynamic
+.     relocation or other arcane processing.  It is skipped when
+.     going through the first-pass output, trusting that someone
+.     else up the line will take care of it later.  *}
+.#define SEC_LINKER_CREATED 0x800000
+.
+.  {* This section should not be subject to garbage collection.  *}
+.#define SEC_KEEP 0x1000000
+.
+.  {* This section contains "short" data, and should be placed
+.     "near" the GP.  *}
+.#define SEC_SMALL_DATA 0x2000000
+.
+.  {* This section contains data which may be shared with other
+.     executables or shared objects.  *}
+.#define SEC_SHARED 0x4000000
+.
+.  {* When a section with this flag is being linked, then if the size of
+.     the input section is less than a page, it should not cross a page
+.     boundary.  If the size of the input section is one page or more, it
+.     should be aligned on a page boundary.  *}
+.#define SEC_BLOCK 0x8000000
+.
+.  {* Conditionally link this section; do not link if there are no
+.     references found to any symbol in the section.  *}
+.#define SEC_CLINK 0x10000000
+.
+.  {* Attempt to merge identical entities in the section.
+.     Entity size is given in the entsize field.  *}
+.#define SEC_MERGE 0x20000000
+.
+.  {* If given with SEC_MERGE, entities to merge are zero terminated
+.     strings where entsize specifies character size instead of fixed
+.     size entries.  *}
+.#define SEC_STRINGS 0x40000000
+.
+.  {* This section contains data about section groups.  *}
+.#define SEC_GROUP 0x80000000
+.
+.  {*  End of section flags.  *}
+.
+.  {* Some internal packed boolean fields.  *}
+.
+.  {* See the vma field.  *}
+.  unsigned int user_set_vma : 1;
+.
+.  {* Whether relocations have been processed.  *}
+.  unsigned int reloc_done : 1;
+.
+.  {* A mark flag used by some of the linker backends.  *}
+.  unsigned int linker_mark : 1;
+.
+.  {* Another mark flag used by some of the linker backends.  Set for
+.     output sections that have an input section.  *}
+.  unsigned int linker_has_input : 1;
+.
+.  {* A mark flag used by some linker backends for garbage collection.  *}
+.  unsigned int gc_mark : 1;
+.
+.  {* The following flags are used by the ELF linker. *}
+.
+.  {* Mark sections which have been allocated to segments.  *}
+.  unsigned int segment_mark : 1;
+.
+.  {* Type of sec_info information.  *}
+.  unsigned int sec_info_type:3;
+.#define ELF_INFO_TYPE_NONE      0
+.#define ELF_INFO_TYPE_STABS     1
+.#define ELF_INFO_TYPE_MERGE     2
+.#define ELF_INFO_TYPE_EH_FRAME  3
+.#define ELF_INFO_TYPE_JUST_SYMS 4
 .
 .
-.   file_ptr moving_line_filepos;
+.  {* Nonzero if this section uses RELA relocations, rather than REL.  *}
+.  unsigned int use_rela_p:1;
 .
 .
-.        {* what the section number is in the target world  *}
+.  {* Bits used by various backends.  *}
+.  unsigned int has_tls_reloc:1;
 .
 .
-.   unsigned int target_index;
+.  {* Usused bits.  *}
+.  unsigned int flag11:1;
+.  unsigned int flag12:1;
+.  unsigned int flag13:1;
+.  unsigned int flag14:1;
+.  unsigned int flag15:1;
+.  unsigned int flag16:4;
+.  unsigned int flag20:4;
+.  unsigned int flag24:8;
 .
 .
-.   PTR used_by_bfd;
+.  {* End of internal packed boolean fields.  *}
 .
 .
-.        {* If this is a constructor section then here is a list of the
-.           relocations created to relocate items within it. *}
+.  {*  The virtual memory address of the section - where it will be
+.      at run time.  The symbols are relocated against this.  The
+.      user_set_vma flag is maintained by bfd; if it's not set, the
+.      backend can assign addresses (for example, in <<a.out>>, where
+.      the default address for <<.data>> is dependent on the specific
+.      target and various flags).  *}
+.  bfd_vma vma;
 .
 .
-.   struct relent_chain *constructor_chain;
+.  {*  The load address of the section - where it would be in a
+.      rom image; really only used for writing section header
+.      information.  *}
+.  bfd_vma lma;
 .
 .
-.        {* The BFD which owns the section. *}
+.  {* The size of the section in octets, as it will be output.
+.     Contains a value even if the section has no contents (e.g., the
+.     size of <<.bss>>).  This will be filled in after relocation.  *}
+.  bfd_size_type _cooked_size;
 .
 .
-.   bfd *owner;
+.  {* The original size on disk of the section, in octets.  Normally this
+.     value is the same as the size, but if some relaxing has
+.     been done, then this value will be bigger.  *}
+.  bfd_size_type _raw_size;
+.
+.  {* If this section is going to be output, then this value is the
+.     offset in *bytes* into the output section of the first byte in the
+.     input section (byte ==> smallest addressable unit on the
+.     target).  In most cases, if this was going to start at the
+.     100th octet (8-bit quantity) in the output section, this value
+.     would be 100.  However, if the target byte size is 16 bits
+.     (bfd_octets_per_byte is "2"), this value would be 50.  *}
+.  bfd_vma output_offset;
+.
+.  {* The output section through which to map on output.  *}
+.  struct sec *output_section;
+.
+.  {* The alignment requirement of the section, as an exponent of 2 -
+.     e.g., 3 aligns to 2^3 (or 8).  *}
+.  unsigned int alignment_power;
+.
+.  {* If an input section, a pointer to a vector of relocation
+.     records for the data in this section.  *}
+.  struct reloc_cache_entry *relocation;
+.
+.  {* If an output section, a pointer to a vector of pointers to
+.     relocation records for the data in this section.  *}
+.  struct reloc_cache_entry **orelocation;
+.
+.  {* The number of relocation records in one of the above.  *}
+.  unsigned reloc_count;
+.
+.  {* Information below is back end specific - and not always used
+.     or updated.  *}
+.
+.  {* File position of section data.  *}
+.  file_ptr filepos;
+.
+.  {* File position of relocation info.  *}
+.  file_ptr rel_filepos;
+.
+.  {* File position of line data.  *}
+.  file_ptr line_filepos;
+.
+.  {* Pointer to data for applications.  *}
+.  PTR userdata;
+.
+.  {* If the SEC_IN_MEMORY flag is set, this points to the actual
+.     contents.  *}
+.  unsigned char *contents;
+.
+.  {* Attached line number information.  *}
+.  alent *lineno;
+.
+.  {* Number of line number records.  *}
+.  unsigned int lineno_count;
+.
+.  {* Entity size for merging purposes.  *}
+.  unsigned int entsize;
+.
+.  {* Optional information about a COMDAT entry; NULL if not COMDAT.  *}
+.  struct bfd_comdat_info *comdat;
+.
+.  {* When a section is being output, this value changes as more
+.     linenumbers are written out.  *}
+.  file_ptr moving_line_filepos;
+.
+.  {* What the section number is in the target world.  *}
+.  int target_index;
+.
+.  PTR used_by_bfd;
+.
+.  {* If this is a constructor section then here is a list of the
+.     relocations created to relocate items within it.  *}
+.  struct relent_chain *constructor_chain;
+.
+.  {* The BFD which owns the section.  *}
+.  bfd *owner;
+.
+.  {* A symbol which points at this section only.  *}
+.  struct symbol_cache_entry *symbol;
+.  struct symbol_cache_entry **symbol_ptr_ptr;
+.
+.  struct bfd_link_order *link_order_head;
+.  struct bfd_link_order *link_order_tail;
+.} asection;
+.
+.{* These sections are global, and are managed by BFD.  The application
+.   and target back end are not permitted to change the values in
+.   these sections.  New code should use the section_ptr macros rather
+.   than referring directly to the const sections.  The const sections
+.   may eventually vanish.  *}
+.#define BFD_ABS_SECTION_NAME "*ABS*"
+.#define BFD_UND_SECTION_NAME "*UND*"
+.#define BFD_COM_SECTION_NAME "*COM*"
+.#define BFD_IND_SECTION_NAME "*IND*"
+.
+.{* The absolute section.  *}
+.extern const asection bfd_abs_section;
+.#define bfd_abs_section_ptr ((asection *) &bfd_abs_section)
+.#define bfd_is_abs_section(sec) ((sec) == bfd_abs_section_ptr)
+.{* Pointer to the undefined section.  *}
+.extern const asection bfd_und_section;
+.#define bfd_und_section_ptr ((asection *) &bfd_und_section)
+.#define bfd_is_und_section(sec) ((sec) == bfd_und_section_ptr)
+.{* Pointer to the common section.  *}
+.extern const asection bfd_com_section;
+.#define bfd_com_section_ptr ((asection *) &bfd_com_section)
+.{* Pointer to the indirect section.  *}
+.extern const asection bfd_ind_section;
+.#define bfd_ind_section_ptr ((asection *) &bfd_ind_section)
+.#define bfd_is_ind_section(sec) ((sec) == bfd_ind_section_ptr)
+.
+.#define bfd_is_const_section(SEC)             \
+. (   ((SEC) == bfd_abs_section_ptr)           \
+.  || ((SEC) == bfd_und_section_ptr)           \
+.  || ((SEC) == bfd_com_section_ptr)           \
+.  || ((SEC) == bfd_ind_section_ptr))
+.
+.extern const struct symbol_cache_entry * const bfd_abs_symbol;
+.extern const struct symbol_cache_entry * const bfd_com_symbol;
+.extern const struct symbol_cache_entry * const bfd_und_symbol;
+.extern const struct symbol_cache_entry * const bfd_ind_symbol;
+.#define bfd_get_section_size_before_reloc(section) \
+.     ((section)->reloc_done ? (abort (), (bfd_size_type) 1) \
+.                            : (section)->_raw_size)
+.#define bfd_get_section_size_after_reloc(section) \
+.     ((section)->reloc_done ? (section)->_cooked_size \
+.                            : (abort (), (bfd_size_type) 1))
+.
+.{* Macros to handle insertion and deletion of a bfd's sections.  These
+.   only handle the list pointers, ie. do not adjust section_count,
+.   target_index etc.  *}
+.#define bfd_section_list_remove(ABFD, PS) \
+.  do                                                  \
+.    {                                                 \
+.      asection **_ps = PS;                            \
+.      asection *_s = *_ps;                            \
+.      *_ps = _s->next;                                        \
+.      if (_s->next == NULL)                           \
+.        (ABFD)->section_tail = _ps;                   \
+.    }                                                 \
+.  while (0)
+.#define bfd_section_list_insert(ABFD, PS, S) \
+.  do                                                  \
+.    {                                                 \
+.      asection **_ps = PS;                            \
+.      asection *_s = S;                               \
+.      _s->next = *_ps;                                        \
+.      *_ps = _s;                                      \
+.      if (_s->next == NULL)                           \
+.        (ABFD)->section_tail = &_s->next;             \
+.    }                                                 \
+.  while (0)
 .
 .
-.} asection ;
 */
 
 */
 
+/* We use a macro to initialize the static asymbol structures because
+   traditional C does not permit us to initialize a union member while
+   gcc warns if we don't initialize it.  */
+ /* the_bfd, name, value, attr, section [, udata] */
+#ifdef __STDC__
+#define GLOBAL_SYM_INIT(NAME, SECTION) \
+  { 0, NAME, 0, BSF_SECTION_SYM, (asection *) SECTION, { 0 }}
+#else
+#define GLOBAL_SYM_INIT(NAME, SECTION) \
+  { 0, NAME, 0, BSF_SECTION_SYM, (asection *) SECTION }
+#endif
+
+/* These symbols are global, not specific to any BFD.  Therefore, anything
+   that tries to change them is broken, and should be repaired.  */
+
+static const asymbol global_syms[] =
+{
+  GLOBAL_SYM_INIT (BFD_COM_SECTION_NAME, &bfd_com_section),
+  GLOBAL_SYM_INIT (BFD_UND_SECTION_NAME, &bfd_und_section),
+  GLOBAL_SYM_INIT (BFD_ABS_SECTION_NAME, &bfd_abs_section),
+  GLOBAL_SYM_INIT (BFD_IND_SECTION_NAME, &bfd_ind_section)
+};
+
+#define STD_SECTION(SEC, FLAGS, SYM, NAME, IDX)                                \
+  const asymbol * const SYM = (asymbol *) &global_syms[IDX];           \
+  const asection SEC =                                                         \
+    /* name, id,  index, next, flags, user_set_vma, reloc_done,      */        \
+    { NAME,  IDX, 0,     NULL, FLAGS, 0,            0,                 \
+                                                                       \
+    /* linker_mark, linker_has_input, gc_mark, segment_mark,         */        \
+       0,           0,                1,       0,                      \
+                                                                       \
+    /* sec_info_type, use_rela_p, has_tls_reloc, flag11, flag12,     */ \
+       0,            0,          0,             0,      0,             \
+                                                                       \
+    /* flag13, flag14, flag15, flag16, flag20, flag24,               */ \
+       0,      0,      0,      0,      0,      0,                      \
+                                                                       \
+    /* vma, lma, _cooked_size, _raw_size,                            */        \
+       0,   0,   0,            0,                                      \
+                                                                       \
+    /* output_offset, output_section,      alignment_power,          */        \
+       0,             (struct sec *) &SEC, 0,                          \
+                                                                       \
+    /* relocation, orelocation, reloc_count, filepos, rel_filepos,   */        \
+       NULL,       NULL,        0,           0,       0,               \
+                                                                       \
+    /* line_filepos, userdata, contents, lineno, lineno_count,       */        \
+       0,            NULL,     NULL,     NULL,   0,                    \
+                                                                       \
+    /* entsize, comdat, moving_line_filepos,                         */        \
+       0,       NULL,   0,                                             \
+                                                                       \
+    /* target_index, used_by_bfd, constructor_chain, owner,          */        \
+       0,            NULL,        NULL,              NULL,             \
+                                                                       \
+    /* symbol,                                                       */        \
+       (struct symbol_cache_entry *) &global_syms[IDX],                        \
+                                                                       \
+    /* symbol_ptr_ptr,                                               */        \
+       (struct symbol_cache_entry **) &SYM,                            \
+                                                                       \
+    /* link_order_head, link_order_tail                              */        \
+       NULL,            NULL                                           \
+    }
+
+STD_SECTION (bfd_com_section, SEC_IS_COMMON, bfd_com_symbol,
+            BFD_COM_SECTION_NAME, 0);
+STD_SECTION (bfd_und_section, 0, bfd_und_symbol, BFD_UND_SECTION_NAME, 1);
+STD_SECTION (bfd_abs_section, 0, bfd_abs_symbol, BFD_ABS_SECTION_NAME, 2);
+STD_SECTION (bfd_ind_section, 0, bfd_ind_symbol, BFD_IND_SECTION_NAME, 3);
+#undef STD_SECTION
+
+struct section_hash_entry
+{
+  struct bfd_hash_entry root;
+  asection section;
+};
+
+/* Initialize an entry in the section hash table.  */
+
+struct bfd_hash_entry *
+bfd_section_hash_newfunc (entry, table, string)
+     struct bfd_hash_entry *entry;
+     struct bfd_hash_table *table;
+     const char *string;
+{
+  /* Allocate the structure if it has not already been allocated by a
+     subclass.  */
+  if (entry == NULL)
+    {
+      entry = (struct bfd_hash_entry *)
+       bfd_hash_allocate (table, sizeof (struct section_hash_entry));
+      if (entry == NULL)
+       return entry;
+    }
+
+  /* Call the allocation method of the superclass.  */
+  entry = bfd_hash_newfunc (entry, table, string);
+  if (entry != NULL)
+    {
+      memset ((PTR) &((struct section_hash_entry *) entry)->section,
+             0, sizeof (asection));
+    }
+
+  return entry;
+}
+
+#define section_hash_lookup(table, string, create, copy) \
+  ((struct section_hash_entry *) \
+   bfd_hash_lookup ((table), (string), (create), (copy)))
+
+/* Initializes a new section.  NEWSECT->NAME is already set.  */
+
+static asection *bfd_section_init PARAMS ((bfd *, asection *));
+
+static asection *
+bfd_section_init (abfd, newsect)
+     bfd *abfd;
+     asection *newsect;
+{
+  static int section_id = 0x10;  /* id 0 to 3 used by STD_SECTION.  */
+
+  newsect->id = section_id;
+  newsect->index = abfd->section_count;
+  newsect->owner = abfd;
+
+  /* Create a symbol whose only job is to point to this section.  This
+     is useful for things like relocs which are relative to the base
+     of a section.  */
+  newsect->symbol = bfd_make_empty_symbol (abfd);
+  if (newsect->symbol == NULL)
+    return NULL;
+
+  newsect->symbol->name = newsect->name;
+  newsect->symbol->value = 0;
+  newsect->symbol->section = newsect;
+  newsect->symbol->flags = BSF_SECTION_SYM;
+
+  newsect->symbol_ptr_ptr = &newsect->symbol;
+
+  if (! BFD_SEND (abfd, _new_section_hook, (abfd, newsect)))
+    return NULL;
+
+  section_id++;
+  abfd->section_count++;
+  *abfd->section_tail = newsect;
+  abfd->section_tail = &newsect->next;
+  return newsect;
+}
+
 /*
 /*
+DOCDD
 INODE
 INODE
-       section prototypes,  , typedef asection, Sections
-
+section prototypes,  , typedef asection, Sections
 SUBSECTION
 SUBSECTION
-       section prototypes
+       Section prototypes
 
 
-These are the functions exported by the section handling part of
-<<libbfd>.
+These are the functions exported by the section handling part of BFD.
 */
 
 /*
 */
 
 /*
-FUNCTION 
+FUNCTION
+       bfd_section_list_clear
+
+SYNOPSIS
+       void bfd_section_list_clear (bfd *);
+
+DESCRIPTION
+       Clears the section list, and also resets the section count and
+       hash table entries.
+*/
+
+void
+bfd_section_list_clear (abfd)
+     bfd *abfd;
+{
+  abfd->sections = NULL;
+  abfd->section_tail = &abfd->sections;
+  abfd->section_count = 0;
+  memset ((PTR) abfd->section_htab.table, 0,
+         abfd->section_htab.size * sizeof (struct bfd_hash_entry *));
+}
+
+/*
+FUNCTION
        bfd_get_section_by_name
 
 SYNOPSIS
        bfd_get_section_by_name
 
 SYNOPSIS
-       asection *bfd_get_section_by_name(bfd *abfd, CONST char *name);
+       asection *bfd_get_section_by_name(bfd *abfd, const char *name);
 
 DESCRIPTION
 
 DESCRIPTION
-       Runs through the provided @var{abfd} and returns the
-       <<asection>> who's name matches that provided, otherwise NULL.
+       Run through @var{abfd} and return the one of the
+       <<asection>>s whose name matches @var{name}, otherwise <<NULL>>.
        @xref{Sections}, for more information.
 
        @xref{Sections}, for more information.
 
+       This should only be used in special cases; the normal way to process
+       all sections of a given name is to use <<bfd_map_over_sections>> and
+       <<strcmp>> on the name (or better yet, base it on the section flags
+       or something else) for each section.
 */
 
 asection *
 */
 
 asection *
-DEFUN(bfd_get_section_by_name,(abfd, name),
-      bfd *abfd AND
-      CONST char *name)
+bfd_get_section_by_name (abfd, name)
+     bfd *abfd;
+     const char *name;
 {
 {
-  asection *sect;
+  struct section_hash_entry *sh;
+
+  sh = section_hash_lookup (&abfd->section_htab, name, FALSE, FALSE);
+  if (sh != NULL)
+    return &sh->section;
 
 
-  for (sect = abfd->sections; sect != NULL; sect = sect->next)
-    if (!strcmp (sect->name, name)) return sect;
   return NULL;
 }
 
   return NULL;
 }
 
+/*
+FUNCTION
+       bfd_get_unique_section_name
+
+SYNOPSIS
+       char *bfd_get_unique_section_name(bfd *abfd,
+                                         const char *templat,
+                                         int *count);
+
+DESCRIPTION
+       Invent a section name that is unique in @var{abfd} by tacking
+       a dot and a digit suffix onto the original @var{templat}.  If
+       @var{count} is non-NULL, then it specifies the first number
+       tried as a suffix to generate a unique name.  The value
+       pointed to by @var{count} will be incremented in this case.
+*/
+
+char *
+bfd_get_unique_section_name (abfd, templat, count)
+     bfd *abfd;
+     const char *templat;
+     int *count;
+{
+  int num;
+  unsigned int len;
+  char *sname;
+
+  len = strlen (templat);
+  sname = bfd_malloc ((bfd_size_type) len + 8);
+  if (sname == NULL)
+    return NULL;
+  memcpy (sname, templat, len);
+  num = 1;
+  if (count != NULL)
+    num = *count;
+
+  do
+    {
+      /* If we have a million sections, something is badly wrong.  */
+      if (num > 999999)
+       abort ();
+      sprintf (sname + len, ".%d", num++);
+    }
+  while (section_hash_lookup (&abfd->section_htab, sname, FALSE, FALSE));
+
+  if (count != NULL)
+    *count = num;
+  return sname;
+}
 
 /*
 FUNCTION
        bfd_make_section_old_way
 
 SYNOPSIS
 
 /*
 FUNCTION
        bfd_make_section_old_way
 
 SYNOPSIS
-       asection *bfd_make_section_old_way(bfd *, CONST char *name);
+       asection *bfd_make_section_old_way(bfd *abfd, const char *name);
 
 DESCRIPTION
 
 DESCRIPTION
-       This function creates a new empty section called @var{name}
-       and attaches it to the end of the chain of sections for the
-       BFD supplied. An attempt to create a section with a name which
-       is already in use, returns its pointer without changing the
+       Create a new empty section called @var{name}
+       and attach it to the end of the chain of sections for the
+       BFD @var{abfd}. An attempt to create a section with a name which
+       is already in use returns its pointer without changing the
        section chain.
 
        It has the funny name since this is the way it used to be
        section chain.
 
        It has the funny name since this is the way it used to be
-       before is was rewritten...
+       before it was rewritten....
 
        Possible errors are:
 
        Possible errors are:
-       o invalid_operation
+       o <<bfd_error_invalid_operation>> -
        If output has already started for this BFD.
        If output has already started for this BFD.
-       o no_memory
-       If obstack alloc fails.
+       o <<bfd_error_no_memory>> -
+       If memory allocation fails.
 
 */
 
 
 */
 
-
 asection *
 asection *
-DEFUN(bfd_make_section_old_way,(abfd, name),
-      bfd *abfd AND
-      CONST char * name)
+bfd_make_section_old_way (abfd, name)
+     bfd *abfd;
+     const char *name;
 {
 {
-  asection *sec = bfd_get_section_by_name(abfd, name);
-  if (sec == (asection *)NULL) 
+  struct section_hash_entry *sh;
+  asection *newsect;
+
+  if (abfd->output_has_begun)
     {
     {
-      sec = bfd_make_section(abfd, name);
+      bfd_set_error (bfd_error_invalid_operation);
+      return NULL;
     }
     }
-  return sec;
-}
 
 
+  if (strcmp (name, BFD_ABS_SECTION_NAME) == 0)
+    return bfd_abs_section_ptr;
+
+  if (strcmp (name, BFD_COM_SECTION_NAME) == 0)
+    return bfd_com_section_ptr;
+
+  if (strcmp (name, BFD_UND_SECTION_NAME) == 0)
+    return bfd_und_section_ptr;
+
+  if (strcmp (name, BFD_IND_SECTION_NAME) == 0)
+    return bfd_ind_section_ptr;
+
+  sh = section_hash_lookup (&abfd->section_htab, name, TRUE, FALSE);
+  if (sh == NULL)
+    return NULL;
+
+  newsect = &sh->section;
+  if (newsect->name != NULL)
+    {
+      /* Section already exists.  */
+      return newsect;
+    }
+
+  newsect->name = name;
+  return bfd_section_init (abfd, newsect);
+}
 
 /*
 FUNCTION
 
 /*
 FUNCTION
-       bfd_make_section
+       bfd_make_section_anyway
 
 SYNOPSIS
 
 SYNOPSIS
-       asection * bfd_make_section(bfd *, CONST char *name);
+       asection *bfd_make_section_anyway(bfd *abfd, const char *name);
 
 DESCRIPTION
 
 DESCRIPTION
-       This function creates a new empty section called @var{name}
-       and attaches it to the end of the chain of sections for the
-       BFD supplied. An attempt to create a section with a name which
-       is already in use, returns NULL without changing the section
-       chain.
+   Create a new empty section called @var{name} and attach it to the end of
+   the chain of sections for @var{abfd}.  Create a new section even if there
+   is already a section with that name.
 
 
-       Possible errors are:
-       o invalid_operation - If output has already started for this BFD.
-       o no_memory - If obstack alloc fails.
+   Return <<NULL>> and set <<bfd_error>> on error; possible errors are:
+   o <<bfd_error_invalid_operation>> - If output has already started for @var{abfd}.
+   o <<bfd_error_no_memory>> - If memory allocation fails.
 */
 
 */
 
-
-
 sec_ptr
 sec_ptr
-DEFUN(bfd_make_section,(abfd, name),
-      bfd *abfd AND
-      CONST char * name)
+bfd_make_section_anyway (abfd, name)
+     bfd *abfd;
+     const char *name;
 {
 {
-  asection *newsect;  
-  asection **  prev = &abfd->sections;
-  asection * sect = abfd->sections;
-  
-  if (abfd->output_has_begun) {
-    bfd_error = invalid_operation;
-    return NULL;
-  }
+  struct section_hash_entry *sh;
+  asection *newsect;
 
 
-  while (sect) {
-    if (!strcmp(sect->name, name)) return NULL;
-    prev = &sect->next;
-    sect = sect->next;
-  }
+  if (abfd->output_has_begun)
+    {
+      bfd_set_error (bfd_error_invalid_operation);
+      return NULL;
+    }
 
 
-  newsect = (asection *) bfd_zalloc(abfd, sizeof (asection));
-  if (newsect == NULL) {
-    bfd_error = no_memory;
+  sh = section_hash_lookup (&abfd->section_htab, name, TRUE, FALSE);
+  if (sh == NULL)
     return NULL;
     return NULL;
-  }
+
+  newsect = &sh->section;
+  if (newsect->name != NULL)
+    {
+      /* We are making a section of the same name.  It can't go in
+        section_htab without generating a unique section name and
+        that would be pointless;  We don't need to traverse the
+        hash table.  */
+      newsect = (asection *) bfd_zalloc (abfd, sizeof (asection));
+      if (newsect == NULL)
+       return NULL;
+    }
 
   newsect->name = name;
 
   newsect->name = name;
-  newsect->index = abfd->section_count++;
-  newsect->flags = SEC_NO_FLAGS;
-
-  newsect->userdata = 0;
-  newsect->next = (asection *)NULL;
-  newsect->relocation = (arelent *)NULL;
-  newsect->reloc_count = 0;
-  newsect->line_filepos =0;
-  newsect->owner = abfd;
-  if (BFD_SEND (abfd, _new_section_hook, (abfd, newsect)) != true) {
-    free (newsect);
+  return bfd_section_init (abfd, newsect);
+}
+
+/*
+FUNCTION
+       bfd_make_section
+
+SYNOPSIS
+       asection *bfd_make_section(bfd *, const char *name);
+
+DESCRIPTION
+   Like <<bfd_make_section_anyway>>, but return <<NULL>> (without calling
+   bfd_set_error ()) without changing the section chain if there is already a
+   section named @var{name}.  If there is an error, return <<NULL>> and set
+   <<bfd_error>>.
+*/
+
+asection *
+bfd_make_section (abfd, name)
+     bfd *abfd;
+     const char *name;
+{
+  struct section_hash_entry *sh;
+  asection *newsect;
+
+  if (abfd->output_has_begun)
+    {
+      bfd_set_error (bfd_error_invalid_operation);
+      return NULL;
+    }
+
+  if (strcmp (name, BFD_ABS_SECTION_NAME) == 0
+      || strcmp (name, BFD_COM_SECTION_NAME) == 0
+      || strcmp (name, BFD_UND_SECTION_NAME) == 0
+      || strcmp (name, BFD_IND_SECTION_NAME) == 0)
     return NULL;
     return NULL;
-  }
 
 
-  *prev = newsect;
-  return newsect;
-}
+  sh = section_hash_lookup (&abfd->section_htab, name, TRUE, FALSE);
+  if (sh == NULL)
+    return NULL;
+
+  newsect = &sh->section;
+  if (newsect->name != NULL)
+    {
+      /* Section already exists.  */
+      return newsect;
+    }
 
 
+  newsect->name = name;
+  return bfd_section_init (abfd, newsect);
+}
 
 /*
 FUNCTION
        bfd_set_section_flags
 
 SYNOPSIS
 
 /*
 FUNCTION
        bfd_set_section_flags
 
 SYNOPSIS
-       boolean bfd_set_section_flags(bfd *, asection *, flagword);
+       bfd_boolean bfd_set_section_flags (bfd *abfd, asection *sec, flagword flags);
 
 DESCRIPTION
 
 DESCRIPTION
-       Attempts to set the attributes of the section named in the BFD
-       supplied to the value. Returns true on success, false on
-       error. Possible error returns are:
+       Set the attributes of the section @var{sec} in the BFD
+       @var{abfd} to the value @var{flags}. Return <<TRUE>> on success,
+       <<FALSE>> on error. Possible error returns are:
 
 
-       o invalid operation
+       o <<bfd_error_invalid_operation>> -
        The section cannot have one or more of the attributes
        requested. For example, a .bss section in <<a.out>> may not
        have the <<SEC_HAS_CONTENTS>> field set.
 
 */
 
        The section cannot have one or more of the attributes
        requested. For example, a .bss section in <<a.out>> may not
        have the <<SEC_HAS_CONTENTS>> field set.
 
 */
 
-boolean
-DEFUN(bfd_set_section_flags,(abfd, section, flags),
-     bfd *abfd AND
-     sec_ptr section AND
-     flagword flags)
+/*ARGSUSED*/
+bfd_boolean
+bfd_set_section_flags (abfd, section, flags)
+     bfd *abfd ATTRIBUTE_UNUSED;
+     sec_ptr section;
+     flagword flags;
 {
 {
-  if ((flags & bfd_applicable_section_flags (abfd)) != flags) {
-    bfd_error = invalid_operation;
-    return false;
-  }
+#if 0
+  /* If you try to copy a text section from an input file (where it
+     has the SEC_CODE flag set) to an output file, this loses big if
+     the bfd_applicable_section_flags (abfd) doesn't have the SEC_CODE
+     set - which it doesn't, at least not for a.out.  FIXME */
+
+  if ((flags & bfd_applicable_section_flags (abfd)) != flags)
+    {
+      bfd_set_error (bfd_error_invalid_operation);
+      return FALSE;
+    }
+#endif
 
   section->flags = flags;
 
   section->flags = flags;
-  return true;
+  return TRUE;
 }
 
 }
 
-
 /*
 FUNCTION
        bfd_map_over_sections
 
 SYNOPSIS
 /*
 FUNCTION
        bfd_map_over_sections
 
 SYNOPSIS
-       void bfd_map_over_sections(bfd *abfd, void (*func)(), PTR obj);
+       void bfd_map_over_sections(bfd *abfd,
+                                  void (*func) (bfd *abfd,
+                                               asection *sect,
+                                               PTR obj),
+                                  PTR obj);
 
 DESCRIPTION
 
 DESCRIPTION
-       Calls the provided function @var{func} for each section
+       Call the provided function @var{func} for each section
        attached to the BFD @var{abfd}, passing @var{obj} as an
        attached to the BFD @var{abfd}, passing @var{obj} as an
-       argument. The function will be called as if by 
+       argument. The function will be called as if by
 
 |      func(abfd, the_section, obj);
 
 
 |      func(abfd, the_section, obj);
 
-       This is the prefered method for iterating over sections, an
+       This is the prefered method for iterating over sections; an
        alternative would be to use a loop:
 
 |         section *p;
 |         for (p = abfd->sections; p != NULL; p = p->next)
 |            func(abfd, p, ...)
 
        alternative would be to use a loop:
 
 |         section *p;
 |         for (p = abfd->sections; p != NULL; p = p->next)
 |            func(abfd, p, ...)
 
-
 */
 
 /*VARARGS2*/
 void
 */
 
 /*VARARGS2*/
 void
-DEFUN(bfd_map_over_sections,(abfd, operation, user_storage),
-      bfd *abfd AND
-      void (*operation)() AND
-      PTR user_storage)
+bfd_map_over_sections (abfd, operation, user_storage)
+     bfd *abfd;
+     void (*operation) PARAMS ((bfd * abfd, asection * sect, PTR obj));
+     PTR user_storage;
 {
   asection *sect;
 {
   asection *sect;
-  int i = 0;
-  
+  unsigned int i = 0;
+
   for (sect = abfd->sections; sect != NULL; i++, sect = sect->next)
     (*operation) (abfd, sect, user_storage);
 
   for (sect = abfd->sections; sect != NULL; i++, sect = sect->next)
     (*operation) (abfd, sect, user_storage);
 
-  if (i != abfd->section_count)         /* Debugging */
-    abort();
+  if (i != abfd->section_count)        /* Debugging */
+    abort ();
 }
 
 }
 
-
 /*
 FUNCTION
        bfd_set_section_size
 
 SYNOPSIS
 /*
 FUNCTION
        bfd_set_section_size
 
 SYNOPSIS
-       boolean bfd_set_section_size(bfd *, asection *, bfd_size_type val);
+       bfd_boolean bfd_set_section_size (bfd *abfd, asection *sec, bfd_size_type val);
 
 DESCRIPTION
 
 DESCRIPTION
-       Sets @var{section} to the size @var{val}. If the operation is
-       ok, then <<true>> is returned, else <<false>>. 
+       Set @var{sec} to the size @var{val}. If the operation is
+       ok, then <<TRUE>> is returned, else <<FALSE>>.
 
        Possible error returns:
 
        Possible error returns:
-       o invalid_operation
-       Writing has started to the BFD, so setting the size is invalid
+       o <<bfd_error_invalid_operation>> -
+       Writing has started to the BFD, so setting the size is invalid.
 
 */
 
 
 */
 
-boolean
-DEFUN(bfd_set_section_size,(abfd, ptr, val),
-      bfd *abfd AND
-      sec_ptr ptr AND
-      bfd_size_type val)
+bfd_boolean
+bfd_set_section_size (abfd, ptr, val)
+     bfd *abfd;
+     sec_ptr ptr;
+     bfd_size_type val;
 {
   /* Once you've started writing to any section you cannot create or change
 {
   /* Once you've started writing to any section you cannot create or change
-     the size of any others. */
+     the size of any others.  */
+
+  if (abfd->output_has_begun)
+    {
+      bfd_set_error (bfd_error_invalid_operation);
+      return FALSE;
+    }
 
 
-  if (abfd->output_has_begun) {
-    bfd_error = invalid_operation;
-    return false;
-  }
+  ptr->_cooked_size = val;
+  ptr->_raw_size = val;
 
 
-  ptr->size = val;
-  
-  return true;
+  return TRUE;
 }
 
 /*
 }
 
 /*
@@ -574,23 +1145,19 @@ FUNCTION
        bfd_set_section_contents
 
 SYNOPSIS
        bfd_set_section_contents
 
 SYNOPSIS
-       boolean bfd_set_section_contents
-         (bfd *abfd,        
-         asection *section,
-         PTR data,
-         file_ptr offset,
-         bfd_size_type count);
-
+       bfd_boolean bfd_set_section_contents (bfd *abfd, asection *section,
+                                             PTR data, file_ptr offset,
+                                             bfd_size_type count);
 
 DESCRIPTION
        Sets the contents of the section @var{section} in BFD
        @var{abfd} to the data starting in memory at @var{data}. The
        data is written to the output section starting at offset
 
 DESCRIPTION
        Sets the contents of the section @var{section} in BFD
        @var{abfd} to the data starting in memory at @var{data}. The
        data is written to the output section starting at offset
-       @var{offset} for @var{count} bytes. 
+       @var{offset} for @var{count} octets.
 
 
-       Normally <<true>> is returned, else <<false>>. Possible error
+       Normally <<TRUE>> is returned, else <<FALSE>>. Possible error
        returns are:
        returns are:
-       o no_contents
+       o <<bfd_error_no_contents>> -
        The output section does not have the <<SEC_HAS_CONTENTS>>
        attribute, so nothing can be written to it.
        o and some more too
        The output section does not have the <<SEC_HAS_CONTENTS>>
        attribute, so nothing can be written to it.
        o and some more too
@@ -598,31 +1165,70 @@ DESCRIPTION
        This routine is front end to the back end function
        <<_bfd_set_section_contents>>.
 
        This routine is front end to the back end function
        <<_bfd_set_section_contents>>.
 
-
 */
 
 */
 
-boolean
-DEFUN(bfd_set_section_contents,(abfd, section, location, offset, count),
-      bfd *abfd AND
-      sec_ptr section AND
-      PTR location AND
-      file_ptr offset AND
-      bfd_size_type count)
+#define bfd_get_section_size_now(abfd,sec) \
+(sec->reloc_done \
+ ? bfd_get_section_size_after_reloc (sec) \
+ : bfd_get_section_size_before_reloc (sec))
+
+bfd_boolean
+bfd_set_section_contents (abfd, section, location, offset, count)
+     bfd *abfd;
+     sec_ptr section;
+     PTR location;
+     file_ptr offset;
+     bfd_size_type count;
 {
 {
-  if (!(bfd_get_section_flags(abfd, section) & SEC_HAS_CONTENTS)) 
-      {
-        bfd_error = no_contents;
-        return(false);
-      } 
+  bfd_size_type sz;
+
+  if (!(bfd_get_section_flags (abfd, section) & SEC_HAS_CONTENTS))
+    {
+      bfd_set_error (bfd_error_no_contents);
+      return FALSE;
+    }
+
+  sz = bfd_get_section_size_now (abfd, section);
+  if ((bfd_size_type) offset > sz
+      || count > sz
+      || offset + count > sz
+      || count != (size_t) count)
+    {
+      bfd_set_error (bfd_error_bad_value);
+      return FALSE;
+    }
+
+  switch (abfd->direction)
+    {
+    case read_direction:
+    case no_direction:
+      bfd_set_error (bfd_error_invalid_operation);
+      return FALSE;
+
+    case write_direction:
+      break;
+
+    case both_direction:
+      /* File is opened for update. `output_has_begun' some time ago when
+          the file was created.  Do not recompute sections sizes or alignments
+          in _bfd_set_section_content.  */
+      abfd->output_has_begun = TRUE;
+      break;
+    }
+
+  /* Record a copy of the data in memory if desired.  */
+  if (section->contents
+      && location != (PTR) (section->contents + offset))
+    memcpy (section->contents + offset, location, (size_t) count);
 
   if (BFD_SEND (abfd, _bfd_set_section_contents,
 
   if (BFD_SEND (abfd, _bfd_set_section_contents,
-                (abfd, section, location, offset, count))) 
-      {
-        abfd->output_has_begun = true;
-        return true;
-      }
+               (abfd, section, location, offset, count)))
+    {
+      abfd->output_has_begun = TRUE;
+      return TRUE;
+    }
 
 
-  return false;
+  return FALSE;
 }
 
 /*
 }
 
 /*
@@ -630,41 +1236,154 @@ FUNCTION
        bfd_get_section_contents
 
 SYNOPSIS
        bfd_get_section_contents
 
 SYNOPSIS
-       boolean bfd_get_section_contents 
-        (bfd *abfd, asection *section, PTR location,
-         file_ptr offset, bfd_size_type count);
+       bfd_boolean bfd_get_section_contents (bfd *abfd, asection *section,
+                                             PTR location, file_ptr offset,
+                                             bfd_size_type count);
 
 DESCRIPTION
 
 DESCRIPTION
-       This function reads data from @var{section} in BFD @var{abfd}
+       Read data from @var{section} in BFD @var{abfd}
        into memory starting at @var{location}. The data is read at an
        offset of @var{offset} from the start of the input section,
        and is read for @var{count} bytes.
 
        into memory starting at @var{location}. The data is read at an
        offset of @var{offset} from the start of the input section,
        and is read for @var{count} bytes.
 
-       If the contents of a constuctor with the <<SEC_CONSTUCTOR>>
-       flag set are requested, then the @var{location} is filled with
-       zeroes. If no errors occur, <<true>> is returned, else
-       <<false>>.
+       If the contents of a constructor with the <<SEC_CONSTRUCTOR>>
+       flag set are requested or if the section does not have the
+       <<SEC_HAS_CONTENTS>> flag set, then the @var{location} is filled
+       with zeroes. If no errors occur, <<TRUE>> is returned, else
+       <<FALSE>>.
 
 
+*/
+bfd_boolean
+bfd_get_section_contents (abfd, section, location, offset, count)
+     bfd *abfd;
+     sec_ptr section;
+     PTR location;
+     file_ptr offset;
+     bfd_size_type count;
+{
+  bfd_size_type sz;
+
+  if (section->flags & SEC_CONSTRUCTOR)
+    {
+      memset (location, 0, (size_t) count);
+      return TRUE;
+    }
+
+  /* Even if reloc_done is TRUE, this function reads unrelocated
+     contents, so we want the raw size.  */
+  sz = section->_raw_size;
+  if ((bfd_size_type) offset > sz
+      || count > sz
+      || offset + count > sz
+      || count != (size_t) count)
+    {
+      bfd_set_error (bfd_error_bad_value);
+      return FALSE;
+    }
 
 
+  if (count == 0)
+    /* Don't bother.  */
+    return TRUE;
 
 
+  if ((section->flags & SEC_HAS_CONTENTS) == 0)
+    {
+      memset (location, 0, (size_t) count);
+      return TRUE;
+    }
+
+  if ((section->flags & SEC_IN_MEMORY) != 0)
+    {
+      memcpy (location, section->contents + offset, (size_t) count);
+      return TRUE;
+    }
+
+  return BFD_SEND (abfd, _bfd_get_section_contents,
+                  (abfd, section, location, offset, count));
+}
+
+/*
+FUNCTION
+       bfd_copy_private_section_data
+
+SYNOPSIS
+       bfd_boolean bfd_copy_private_section_data (bfd *ibfd, asection *isec,
+                                                  bfd *obfd, asection *osec);
+
+DESCRIPTION
+       Copy private section information from @var{isec} in the BFD
+       @var{ibfd} to the section @var{osec} in the BFD @var{obfd}.
+       Return <<TRUE>> on success, <<FALSE>> on error.  Possible error
+       returns are:
+
+       o <<bfd_error_no_memory>> -
+       Not enough memory exists to create private data for @var{osec}.
+
+.#define bfd_copy_private_section_data(ibfd, isection, obfd, osection) \
+.     BFD_SEND (obfd, _bfd_copy_private_section_data, \
+.              (ibfd, isection, obfd, osection))
+*/
+
+/*
+FUNCTION
+       _bfd_strip_section_from_output
+
+SYNOPSIS
+       void _bfd_strip_section_from_output
+       (struct bfd_link_info *info, asection *section);
+
+DESCRIPTION
+       Remove @var{section} from the output.  If the output section
+       becomes empty, remove it from the output bfd.
+
+       This function won't actually do anything except twiddle flags
+       if called too late in the linking process, when it's not safe
+       to remove sections.
 */
 */
-boolean
-DEFUN(bfd_get_section_contents,(abfd, section, location, offset, count),
-      bfd *abfd AND
-      sec_ptr section AND
-      PTR location AND
-      file_ptr offset AND
-      bfd_size_type count)
+void
+_bfd_strip_section_from_output (info, s)
+     struct bfd_link_info *info;
+     asection *s;
 {
 {
-  if (section->flags & SEC_CONSTRUCTOR) 
-      {
-        memset(location, 0, (unsigned)count);
-        return true;
-      }
-  else 
-      {
-        return  (BFD_SEND (abfd, _bfd_get_section_contents,
-                           (abfd, section, location, offset, count)));
-      }
+  asection *os;
+  asection *is;
+  bfd *abfd;
+
+  s->flags |= SEC_EXCLUDE;
+
+  /* If the section wasn't assigned to an output section, or the
+     section has been discarded by the linker script, there's nothing
+     more to do.  */
+  os = s->output_section;
+  if (os == NULL || os->owner == NULL)
+    return;
+
+  /* If the output section has other (non-excluded) input sections, we
+     can't remove it.  */
+  for (abfd = info->input_bfds; abfd != NULL; abfd = abfd->link_next)
+    for (is = abfd->sections; is != NULL; is = is->next)
+      if (is->output_section == os && (is->flags & SEC_EXCLUDE) == 0)
+       return;
+
+  /* If the output section is empty, flag it for removal too.
+     See ldlang.c:strip_excluded_output_sections for the action.  */
+  os->flags |= SEC_EXCLUDE;
 }
 
 }
 
+/*
+FUNCTION
+       bfd_generic_discard_group
+
+SYNOPSIS
+       bfd_boolean bfd_generic_discard_group (bfd *abfd, asection *group);
+
+DESCRIPTION
+       Remove all members of @var{group} from the output.
+*/
+
+bfd_boolean
+bfd_generic_discard_group (abfd, group)
+     bfd *abfd ATTRIBUTE_UNUSED;
+     asection *group ATTRIBUTE_UNUSED;
+{
+  return TRUE;
+}
This page took 0.09537 seconds and 4 git commands to generate.