+ # First scan to see if an enabled language requires some other language.
+ # We assume that a given config-lang.in will list all the language
+ # front ends it requires, even if some are required indirectly.
+ for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+ case ${lang_frag} in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in) ;;
+ *)
+ # From the config-lang.in, get $language, $lang_requires, and
+ # $lang_requires_boot_languages.
+ language=
+ lang_requires=
+ lang_requires_boot_languages=
+ . ${lang_frag}
+ for other in ${lang_requires} ${lang_requires_boot_languages}; do
+ case ,${enable_languages}, in
+ *,$other,*) ;;
+ *,all,*) ;;
+ *,$language,*)
+ echo " \`$other' language required by \`$language'; enabling" 1>&2
+ enable_languages="${enable_languages},${other}"
+ ;;
+ esac
+ done
+ for other in ${lang_requires_boot_languages} ; do
+ if test "$other" != "c"; then
+ case ,${enable_stage1_languages}, in
+ *,$other,*) ;;
+ *,all,*) ;;
+ *)
+ case ,${enable_languages}, in
+ *,$language,*)
+ echo " '$other' language required by '$language' in stage 1; enabling" 1>&2
+ enable_stage1_languages="$enable_stage1_languages,${other}"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ ;;
+ esac
+ done
+
+ new_enable_languages=,c,
+
+ # If LTO is enabled, add the LTO front end.
+ extra_host_libiberty_configure_flags=
+ if test "$enable_lto" = "yes" ; then
+ case ,${enable_languages}, in
+ *,lto,*) ;;
+ *) enable_languages="${enable_languages},lto" ;;
+ esac
+ if test "${build_lto_plugin}" = "yes" ; then
+ configdirs="$configdirs lto-plugin"
+ extra_host_libiberty_configure_flags=--enable-shared
+ fi
+ fi
+
+
+ missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
+ potential_languages=,c,
+
+ enabled_target_libs=
+ disabled_target_libs=
+
+ for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+ case ${lang_frag} in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in) ;;
+ *)
+ # From the config-lang.in, get $language, $target_libs,
+ # $lang_dirs, $boot_language, and $build_by_default
+ language=
+ target_libs=
+ lang_dirs=
+ subdir_requires=
+ boot_language=no
+ build_by_default=yes
+ . ${lang_frag}
+ if test x${language} = x; then
+ echo "${lang_frag} doesn't set \$language." 1>&2
+ exit 1
+ fi
+
+ if test "$language" = "c++"; then
+ boot_language=yes
+ fi
+
+ add_this_lang=no
+ case ,${enable_languages}, in
+ *,${language},*)
+ # Language was explicitly selected; include it
+ # unless it is C, which is enabled by default.
+ if test "$language" != "c"; then
+ add_this_lang=yes
+ fi
+ ;;
+ *,all,*)
+ # 'all' was selected, select it if it is a default language
+ if test "$language" != "c"; then
+ add_this_lang=${build_by_default}
+ fi
+ ;;
+ esac
+
+ # Disable languages that need other directories if these aren't available.
+ for i in $subdir_requires; do
+ test -f "$srcdir/gcc/$i/config-lang.in" && continue
+ case ,${enable_languages}, in
+ *,${language},*)
+ # Specifically requested language; tell them.
+ as_fn_error "The gcc/$i directory contains parts of $language but is missing" "$LINENO" 5
+ ;;
+ *)
+ # Silently disable.
+ add_this_lang=unsupported
+ ;;
+ esac
+ done
+
+ # Disable Ada if no preexisting GNAT is available.
+ case ,${enable_languages},:${language}:${have_gnat} in
+ *,${language},*:ada:no)
+ # Specifically requested language; tell them.
+ as_fn_error "GNAT is required to build $language" "$LINENO" 5
+ ;;
+ *:ada:no)
+ # Silently disable.
+ add_this_lang=unsupported
+ ;;
+ esac
+
+ # Disable a language that is unsupported by the target.
+ case " $unsupported_languages " in
+ *" $language "*)
+ add_this_lang=unsupported
+ ;;
+ esac
+
+ case $add_this_lang in
+ unsupported)
+ # Remove language-dependent dirs.
+ disabled_target_libs="$disabled_target_libs $target_libs"
+ noconfigdirs="$noconfigdirs $lang_dirs"
+ ;;
+ no)
+ # Remove language-dependent dirs; still show language as supported.
+ disabled_target_libs="$disabled_target_libs $target_libs"
+ noconfigdirs="$noconfigdirs $lang_dirs"
+ potential_languages="${potential_languages}${language},"
+ ;;
+ yes)
+ new_enable_languages="${new_enable_languages}${language},"
+ potential_languages="${potential_languages}${language},"
+ missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
+ enabled_target_libs="$enabled_target_libs $target_libs"
+ case "${boot_language}:,$enable_stage1_languages," in
+ yes:* | *:*,$language,* | *:*,yes, | *:*,all,)
+ # Add to (comma-separated) list of stage 1 languages.
+ case ",$stage1_languages," in
+ *,$language,* | ,yes, | ,all,) ;;
+ *) stage1_languages="${stage1_languages}${language}," ;;
+ esac
+ # We need to bootstrap any supporting libraries.
+ bootstrap_target_libs="${bootstrap_target_libs}${target_libs},"
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+
+ # Add target libraries which are only needed for disabled languages
+ # to noconfigdirs.
+ if test -n "$disabled_target_libs"; then
+ for dir in $disabled_target_libs; do
+ case " $enabled_target_libs " in
+ *" ${dir} "*) ;;
+ *) noconfigdirs="$noconfigdirs $dir" ;;
+ esac
+ done
+ fi
+
+ # Check whether --enable-stage1-languages was given.
+if test "${enable_stage1_languages+set}" = set; then :
+ enableval=$enable_stage1_languages; case ,${enable_stage1_languages}, in
+ ,no,|,,)
+ # Set it to something that will have no effect in the loop below
+ enable_stage1_languages=c ;;
+ ,yes,)
+ enable_stage1_languages=`echo $new_enable_languages | \
+ sed -e "s/^,//" -e "s/,$//" ` ;;
+ *,all,*)
+ enable_stage1_languages=`echo ,$enable_stage1_languages, | \
+ sed -e "s/,all,/$new_enable_languages/" -e "s/^,//" -e "s/,$//" ` ;;
+ esac
+
+ # Add "good" languages from enable_stage1_languages to stage1_languages,
+ # while "bad" languages go in missing_languages. Leave no duplicates.
+ for i in `echo $enable_stage1_languages | sed 's/,/ /g' `; do
+ case $potential_languages in
+ *,$i,*)
+ case $stage1_languages in
+ *,$i,*) ;;
+ *) stage1_languages="$stage1_languages$i," ;;
+ esac ;;
+ *)
+ case $missing_languages in
+ *,$i,*) ;;
+ *) missing_languages="$missing_languages$i," ;;
+ esac ;;
+ esac
+ done
+fi
+
+
+ # Remove leading/trailing commas that were added for simplicity
+ potential_languages=`echo "$potential_languages" | sed -e "s/^,//" -e "s/,$//"`
+ missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
+ stage1_languages=`echo "$stage1_languages" | sed -e "s/^,//" -e "s/,$//"`
+ new_enable_languages=`echo "$new_enable_languages" | sed -e "s/^,//" -e "s/,$//"`
+
+ if test "x$missing_languages" != x; then
+ as_fn_error "
+The following requested languages could not be built: ${missing_languages}
+Supported languages are: ${potential_languages}" "$LINENO" 5
+ fi
+ if test "x$new_enable_languages" != "x$enable_languages"; then
+ echo The following languages will be built: ${new_enable_languages}
+ enable_languages="$new_enable_languages"
+ fi
+
+
+ ac_configure_args=`echo " $ac_configure_args" | sed -e "s/ '--enable-languages=[^ ]*'//g" -e "s/$/ '--enable-languages="$enable_languages"'/" `
+fi
+
+# Handle --disable-<component> generically.
+for dir in $configdirs $build_configdirs $target_configdirs ; do
+ dirname=`echo $dir | sed -e s/target-//g -e s/build-//g -e s/-/_/g`
+ varname=`echo $dirname | sed -e s/+/_/g`
+ if eval test x\${enable_${varname}} "=" xno ; then
+ noconfigdirs="$noconfigdirs $dir"
+ fi
+done
+
+# Check for Boehm's garbage collector
+# Check whether --enable-objc-gc was given.
+if test "${enable_objc_gc+set}" = set; then :
+ enableval=$enable_objc_gc; case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in
+ *,objc,*:*:yes:*target-boehm-gc*)
+ as_fn_error "Boehm's garbage collector was requested yet not supported in this configuration" "$LINENO" 5
+ ;;
+esac
+fi
+
+
+# Make sure we only build Boehm's garbage collector if required.
+case ,${enable_languages},:${enable_objc_gc} in
+ *,objc,*:yes)
+ # Keep target-boehm-gc if requested for Objective-C.
+ ;;
+ *)
+ # Otherwise remove target-boehm-gc depending on target-libjava.
+ if echo " ${noconfigdirs} " | grep "target-libjava" >/dev/null 2>&1; then
+ noconfigdirs="$noconfigdirs target-boehm-gc"
+ fi
+ ;;
+esac
+
+# Disable libitm and libsanitizer if we're not building C++
+case ,${enable_languages}, in
+ *,c++,*) ;;
+ *)
+ noconfigdirs="$noconfigdirs target-libitm target-libsanitizer"
+ ;;
+esac
+
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
+# $build_configdirs and $target_configdirs.
+# If we have the source for $noconfigdirs entries, add them to $notsupp.
+
+notsupp=""
+for dir in . $skipdirs $noconfigdirs ; do
+ dirname=`echo $dir | sed -e s/target-//g -e s/build-//g`
+ if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+ if test $dir != . && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+ if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+done
+
+# Quietly strip out all directories which aren't configurable in this tree.
+# This relies on all configurable subdirectories being autoconfiscated, which
+# is now the case.
+build_configdirs_all="$build_configdirs"
+build_configdirs=
+for i in ${build_configdirs_all} ; do
+ j=`echo $i | sed -e s/build-//g`
+ if test -f ${srcdir}/$j/configure ; then
+ build_configdirs="${build_configdirs} $i"
+ fi
+done
+
+configdirs_all="$configdirs"
+configdirs=
+for i in ${configdirs_all} ; do
+ if test -f ${srcdir}/$i/configure ; then
+ configdirs="${configdirs} $i"
+ fi
+done
+
+target_configdirs_all="$target_configdirs"
+target_configdirs=
+for i in ${target_configdirs_all} ; do
+ j=`echo $i | sed -e s/target-//g`
+ if test -f ${srcdir}/$j/configure ; then
+ target_configdirs="${target_configdirs} $i"
+ fi
+done
+
+# Produce a warning message for the subdirs we can't configure.
+# This isn't especially interesting in the Cygnus tree, but in the individual
+# FSF releases, it's important to let people know when their machine isn't
+# supported by the one or two programs in a package.
+
+if test -n "${notsupp}" && test -z "${norecursion}" ; then
+ # If $appdirs is non-empty, at least one of those directories must still
+ # be configured, or we error out. (E.g., if the gas release supports a
+ # specified target in some subdirs but not the gas subdir, we shouldn't
+ # pretend that all is well.)
+ if test -n "$appdirs" ; then
+ for dir in $appdirs ; do
+ if test -r $dir/Makefile.in ; then
+ if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ if echo " ${target_configdirs} " | grep " target-${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ fi
+ done
+ if test -n "$appdirs" ; then
+ echo "*** This configuration is not supported by this package." 1>&2
+ exit 1
+ fi
+ fi
+ # Okay, some application will build, or we don't care to check. Still
+ # notify of subdirs not getting built.
+ echo "*** This configuration is not supported in the following subdirectories:" 1>&2
+ echo " ${notsupp}" 1>&2
+ echo " (Any other directories should still work fine.)" 1>&2
+fi
+
+case "$host" in
+ *msdosdjgpp*)
+ enable_gdbtk=no ;;
+esac
+
+# To find our prefix, in gcc_cv_tool_prefix.
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+
+if test "x$exec_prefix" = xNONE; then
+ if test "x$prefix" = xNONE; then
+ gcc_cv_tool_prefix=$ac_default_prefix
+ else
+ gcc_cv_tool_prefix=$prefix
+ fi
+else
+ gcc_cv_tool_prefix=$exec_prefix
+fi
+
+# If there is no compiler in the tree, use the PATH only. In any
+# case, if there is no compiler in the tree nobody should use
+# AS_FOR_TARGET and LD_FOR_TARGET.
+if test x$host = x$build && test -f $srcdir/gcc/BASE-VER; then
+ gcc_version=`cat $srcdir/gcc/BASE-VER`
+ gcc_cv_tool_dirs="$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin$PATH_SEPARATOR"
+else
+ gcc_cv_tool_dirs=
+fi
+
+if test x$build = x$target && test -n "$md_exec_prefix"; then
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$md_exec_prefix$PATH_SEPARATOR"
+fi
+
+
+
+copy_dirs=
+
+
+# Check whether --with-build-sysroot was given.
+if test "${with_build_sysroot+set}" = set; then :
+ withval=$with_build_sysroot; if test x"$withval" != x ; then
+ SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
+ fi
+else
+ SYSROOT_CFLAGS_FOR_TARGET=
+fi
+
+
+
+
+# Check whether --with-debug-prefix-map was given.
+if test "${with_debug_prefix_map+set}" = set; then :
+ withval=$with_debug_prefix_map; if test x"$withval" != x; then
+ DEBUG_PREFIX_CFLAGS_FOR_TARGET=
+ for debug_map in $withval; do
+ DEBUG_PREFIX_CFLAGS_FOR_TARGET="$DEBUG_PREFIX_CFLAGS_FOR_TARGET -fdebug-prefix-map=$debug_map"
+ done
+ fi
+else
+ DEBUG_PREFIX_CFLAGS_FOR_TARGET=
+fi
+
+
+
+# During gcc bootstrap, if we use some random cc for stage1 then CFLAGS
+# might be empty or "-g". We don't require a C++ compiler, so CXXFLAGS
+# might also be empty (or "-g", if a non-GCC C++ compiler is in the path).
+# We want to ensure that TARGET libraries (which we know are built with
+# gcc) are built with "-O2 -g", so include those options when setting
+# CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
+if test "x$CFLAGS_FOR_TARGET" = x; then
+ CFLAGS_FOR_TARGET=$CFLAGS
+ case " $CFLAGS " in
+ *" -O2 "*) ;;
+ *) CFLAGS_FOR_TARGET="-O2 $CFLAGS_FOR_TARGET" ;;
+ esac
+ case " $CFLAGS " in
+ *" -g "* | *" -g3 "*) ;;
+ *) CFLAGS_FOR_TARGET="-g $CFLAGS_FOR_TARGET" ;;
+ esac
+fi
+
+
+if test "x$CXXFLAGS_FOR_TARGET" = x; then
+ CXXFLAGS_FOR_TARGET=$CXXFLAGS
+ case " $CXXFLAGS " in
+ *" -O2 "*) ;;
+ *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS_FOR_TARGET" ;;
+ esac
+ case " $CXXFLAGS " in
+ *" -g "* | *" -g3 "*) ;;
+ *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS_FOR_TARGET" ;;
+ esac
+fi
+
+
+
+
+# Handle --with-headers=XXX. If the value is not "yes", the contents of
+# the named directory are copied to $(tooldir)/sys-include.
+if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
+ if test x${is_cross_compiler} = xno ; then
+ echo 1>&2 '***' --with-headers is only supported when cross compiling
+ exit 1
+ fi
+ if test x"${with_headers}" != xyes ; then
+ x=${gcc_cv_tool_prefix}
+ copy_dirs="${copy_dirs} ${with_headers} $x/${target_noncanonical}/sys-include"
+ fi
+fi
+
+# Handle --with-libs=XXX. If the value is not "yes", the contents of
+# the name directories are copied to $(tooldir)/lib. Multiple directories
+# are permitted.
+if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
+ if test x${is_cross_compiler} = xno ; then
+ echo 1>&2 '***' --with-libs is only supported when cross compiling
+ exit 1
+ fi
+ if test x"${with_libs}" != xyes ; then
+ # Copy the libraries in reverse order, so that files in the first named
+ # library override files in subsequent libraries.
+ x=${gcc_cv_tool_prefix}
+ for l in ${with_libs}; do
+ copy_dirs="$l $x/${target_noncanonical}/lib ${copy_dirs}"
+ done
+ fi
+fi
+
+# Set with_gnu_as, with_gnu_ld, and with_system_zlib as appropriate.
+#
+# This is done by determining whether or not the appropriate directory
+# is available, and by checking whether or not specific configurations
+# have requested that this magic not happen.
+#
+# The command line options always override the explicit settings in
+# configure.in, and the settings in configure.in override this magic.
+#
+# If the default for a toolchain is to use GNU as and ld, and you don't
+# want to do that, then you should use the --without-gnu-as and
+# --without-gnu-ld options for the configure script. Similarly, if
+# the default is to use the included zlib and you don't want to do that,
+# you should use the --with-system-zlib option for the configure script.
+
+if test x${use_gnu_as} = x &&
+ echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
+ with_gnu_as=yes
+ extra_host_args="$extra_host_args --with-gnu-as"
+fi
+
+if test x${use_gnu_ld} = x &&
+ echo " ${configdirs} " | egrep " (go)?ld " > /dev/null 2>&1 ; then
+ with_gnu_ld=yes
+ extra_host_args="$extra_host_args --with-gnu-ld"
+fi
+
+if test x${use_included_zlib} = x &&
+ echo " ${configdirs} " | grep " zlib " > /dev/null 2>&1 ; then
+ :
+else
+ with_system_zlib=yes
+ extra_host_args="$extra_host_args --with-system-zlib"
+fi
+
+# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
+# can detect this case.
+
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
+ with_newlib=yes
+ extra_host_args="$extra_host_args --with-newlib"
+fi
+
+# Handle ${copy_dirs}
+set fnord ${copy_dirs}
+shift
+while test $# != 0 ; do
+ if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
+ :
+ else
+ echo Copying $1 to $2
+
+ # Use the install script to create the directory and all required
+ # parent directories.
+ if test -d $2 ; then
+ :
+ else
+ echo >config.temp
+ ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
+ fi
+
+ # Copy the directory, assuming we have tar.
+ # FIXME: Should we use B in the second tar? Not all systems support it.
+ (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
+
+ # It is the responsibility of the user to correctly adjust all
+ # symlinks. If somebody can figure out how to handle them correctly
+ # here, feel free to add the code.
+
+ echo $1 > $2/COPIED
+ fi
+ shift; shift
+done
+
+# Determine a target-dependent exec_prefix that the installed
+# gcc will search in. Keep this list sorted by triplet, with
+# the *-*-osname triplets last.
+md_exec_prefix=
+case "${target}" in
+ i[34567]86-pc-msdosdjgpp*)
+ md_exec_prefix=/dev/env/DJDIR/bin
+ ;;
+ *-*-hpux* | \
+ *-*-nto-qnx* | \
+ *-*-solaris2*)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+esac
+
+extra_arflags_for_target=
+extra_nmflags_for_target=
+extra_ranlibflags_for_target=
+target_makefile_frag=/dev/null
+case "${target}" in
+ spu-*-*)
+ target_makefile_frag="config/mt-spu"
+ ;;
+ mips*-sde-elf* | mips*-mti-elf*)
+ target_makefile_frag="config/mt-sde"
+ ;;
+ mipsisa*-*-elfoabi*)
+ target_makefile_frag="config/mt-mips-elfoabi"
+ ;;
+ mips*-*-*linux* | mips*-*-gnu*)
+ target_makefile_frag="config/mt-mips-gnu"
+ ;;
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
+ target_makefile_frag="config/mt-gnu"
+ ;;
+ *-*-aix4.[3456789]* | *-*-aix[56789].*)
+ # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
+ # commands to handle both 32-bit and 64-bit objects. These flags are
+ # harmless if we're using GNU nm or ar.
+ extra_arflags_for_target=" -X32_64"
+ extra_nmflags_for_target=" -B -X32_64"
+ ;;
+esac
+
+alphaieee_frag=/dev/null
+case $target in
+ alpha*-*-*)
+ # This just makes sure to use the -mieee option to build target libs.
+ # This should probably be set individually by each library.
+ alphaieee_frag="config/mt-alphaieee"
+ ;;
+esac
+
+# If --enable-target-optspace always use -Os instead of -O2 to build
+# the target libraries, similarly if it is not specified, use -Os
+# on selected platforms.
+ospace_frag=/dev/null
+case "${enable_target_optspace}:${target}" in
+ yes:*)
+ ospace_frag="config/mt-ospace"
+ ;;
+ :d30v-*)
+ ospace_frag="config/mt-d30v"
+ ;;
+ :m32r-* | :d10v-* | :fr30-*)
+ ospace_frag="config/mt-ospace"
+ ;;
+ no:* | :*)
+ ;;
+ *)
+ echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
+ ;;
+esac
+
+# Some systems (e.g., one of the i386-aix systems the gas testers are
+# using) don't handle "\$" correctly, so don't use it here.
+tooldir='${exec_prefix}'/${target_noncanonical}
+build_tooldir=${tooldir}
+
+# Create a .gdbinit file which runs the one in srcdir
+# and tells GDB to look there for source files.
+
+if test -r ${srcdir}/.gdbinit ; then
+ case ${srcdir} in
+ .) ;;
+ *) cat > ./.gdbinit <<EOF
+# ${NO_EDIT}
+dir ${srcdir}
+dir .
+source ${srcdir}/.gdbinit
+EOF
+ ;;
+ esac
+fi
+
+# Make sure that the compiler is able to generate an executable. If it
+# can't, we are probably in trouble. We don't care whether we can run the
+# executable--we might be using a cross compiler--we only care whether it
+# can be created. At this point the main configure script has set CC.
+we_are_ok=no
+echo "int main () { return 0; }" > conftest.c
+${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
+if test $? = 0 ; then
+ if test -s conftest || test -s conftest.exe ; then
+ we_are_ok=yes
+ fi
+fi
+case $we_are_ok in
+ no)
+ echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
+ echo 1>&2 "*** You must set the environment variable CC to a working compiler."
+ rm -f conftest*
+ exit 1
+ ;;
+esac
+rm -f conftest*
+
+# Decide which environment variable is used to find dynamic libraries.
+case "${host}" in
+ *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
+ *-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+ *-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
+ *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
+esac
+
+# On systems where the dynamic library environment variable is PATH,
+# gcc/ will put dynamic libraries into a subdirectory to avoid adding
+# built executables to PATH.
+if test "$RPATH_ENVVAR" = PATH; then
+ GCC_SHLIB_SUBDIR=/shlib
+else
+ GCC_SHLIB_SUBDIR=
+fi
+
+# Record target_configdirs and the configure arguments for target and
+# build configuration in Makefile.
+target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
+build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
+
+# If we are building libgomp, bootstrap it.
+if echo " ${target_configdirs} " | grep " libgomp " > /dev/null 2>&1 ; then
+ bootstrap_target_libs=${bootstrap_target_libs}target-libgomp,
+fi
+
+# If we are building libsanitizer, bootstrap it.
+if echo " ${target_configdirs} " | grep " libsanitizer " > /dev/null 2>&1 ; then
+ bootstrap_target_libs=${bootstrap_target_libs}target-libsanitizer,
+fi
+
+# Determine whether gdb needs tk/tcl or not.
+# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
+# and in that case we want gdb to be built without tk. Ugh!
+# In fact I believe gdb is the *only* package directly dependent on tk,
+# so we should be able to put the 'maybe's in unconditionally and
+# leave out the maybe dependencies when enable_gdbtk is false. I'm not
+# 100% sure that that's safe though.
+
+gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui"
+case "$enable_gdbtk" in
+ no)
+ GDB_TK="" ;;
+ yes)
+ GDB_TK="${gdb_tk}" ;;
+ *)
+ # Only add the dependency on gdbtk when GDBtk is part of the gdb
+ # distro. Eventually someone will fix this and move Insight, nee
+ # gdbtk to a separate directory.
+ if test -d ${srcdir}/gdb/gdbtk ; then
+ GDB_TK="${gdb_tk}"
+ else
+ GDB_TK=""
+ fi
+ ;;
+esac
+CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
+INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
+
+# Strip out unwanted targets.
+
+# While at that, we remove Makefiles if we were started for recursive
+# configuration, so that the top-level Makefile reconfigures them,
+# like we used to do when configure itself was recursive.
+
+# Loop over modules. We used to use the "$extrasub" feature from Autoconf
+# but now we're fixing up the Makefile ourselves with the additional
+# commands passed to AC_CONFIG_FILES. Use separate variables
+# extrasub-{build,host,target} not because there is any reason to split
+# the substitutions up that way, but only to remain below the limit of
+# 99 commands in a script, for HP-UX sed.
+# Do not nest @if/@endif pairs, because configure will not warn you at all.
+
+case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in
+ yes:yes:*\ gold\ *:*,c++,*) ;;
+ yes:yes:*\ gold\ *:*)
+ as_fn_error "in a combined tree, bootstrapping with --enable-gold requires c++ in stage1_languages" "$LINENO" 5
+ ;;
+esac
+
+# Adjust the toplevel makefile according to whether bootstrap was selected.
+case $enable_bootstrap in
+ yes)
+ bootstrap_suffix=bootstrap
+ BUILD_CONFIG=bootstrap-debug
+ ;;
+ no)
+ bootstrap_suffix=no-bootstrap
+ BUILD_CONFIG=
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for default BUILD_CONFIG" >&5
+$as_echo_n "checking for default BUILD_CONFIG... " >&6; }
+
+
+# Check whether --with-build-config was given.
+if test "${with_build_config+set}" = set; then :
+ withval=$with_build_config; case $with_build_config in
+ yes) with_build_config= ;;
+ no) with_build_config= BUILD_CONFIG= ;;
+ esac
+fi
+
+
+if test "x${with_build_config}" != x; then
+ BUILD_CONFIG=$with_build_config
+else
+ case $BUILD_CONFIG in
+ bootstrap-debug)
+ if echo "int f (void) { return 0; }" > conftest.c &&
+ ${CC} -c conftest.c &&
+ mv conftest.o conftest.o.g0 &&
+ ${CC} -c -g conftest.c &&
+ mv conftest.o conftest.o.g &&
+ ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then
+ :
+ else
+ BUILD_CONFIG=
+ fi
+ rm -f conftest.c conftest.o conftest.o.g0 conftest.o.g
+ ;;
+ esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_CONFIG" >&5
+$as_echo "$BUILD_CONFIG" >&6; }
+
+
+extrasub_build=
+for module in ${build_configdirs} ; do
+ if test -z "${no_recursion}" \
+ && test -f ${build_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${build_subdir}/${module}/Makefile
+ fi
+ extrasub_build="$extrasub_build
+/^@if build-$module\$/d
+/^@endif build-$module\$/d
+/^@if build-$module-$bootstrap_suffix\$/d
+/^@endif build-$module-$bootstrap_suffix\$/d"
+done
+extrasub_host=
+for module in ${configdirs} ; do
+ if test -z "${no_recursion}"; then
+ for file in stage*-${module}/Makefile prev-${module}/Makefile ${module}/Makefile; do
+ if test -f ${file}; then
+ echo 1>&2 "*** removing ${file} to force reconfigure"
+ rm -f ${file}
+ fi
+ done
+ fi
+ extrasub_host="$extrasub_host
+/^@if $module\$/d
+/^@endif $module\$/d
+/^@if $module-$bootstrap_suffix\$/d
+/^@endif $module-$bootstrap_suffix\$/d"
+done
+extrasub_target=
+for module in ${target_configdirs} ; do
+ if test -z "${no_recursion}" \
+ && test -f ${target_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${target_subdir}/${module}/Makefile
+ fi
+
+ # We only bootstrap target libraries listed in bootstrap_target_libs.
+ case $bootstrap_target_libs in
+ *,target-$module,*) target_bootstrap_suffix=$bootstrap_suffix ;;
+ *) target_bootstrap_suffix=no-bootstrap ;;
+ esac
+
+ extrasub_target="$extrasub_target
+/^@if target-$module\$/d
+/^@endif target-$module\$/d
+/^@if target-$module-$target_bootstrap_suffix\$/d
+/^@endif target-$module-$target_bootstrap_suffix\$/d"
+done
+
+# Do the final fixup along with target modules.
+extrasub_target="$extrasub_target
+/^@if /,/^@endif /d"
+
+# Create the serialization dependencies. This uses a temporary file.
+
+# Check whether --enable-serial-configure was given.
+if test "${enable_serial_configure+set}" = set; then :
+ enableval=$enable_serial_configure;
+fi
+
+
+case ${enable_serial_configure} in
+ yes)
+ enable_serial_build_configure=yes
+ enable_serial_host_configure=yes
+ enable_serial_target_configure=yes
+ ;;
+esac
+
+# These force 'configure's to be done one at a time, to avoid problems
+# with contention over a shared config.cache.
+rm -f serdep.tmp
+echo '# serdep.tmp' > serdep.tmp
+olditem=
+test "x${enable_serial_build_configure}" = xyes &&
+for item in ${build_configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+olditem=
+test "x${enable_serial_host_configure}" = xyes &&
+for item in ${configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+olditem=
+test "x${enable_serial_target_configure}" = xyes &&
+for item in ${target_configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+serialization_dependencies=serdep.tmp
+
+
+# Base args. Strip norecursion, cache-file, srcdir, host, build,
+# target, nonopt, and variable assignments. These are the ones we
+# might not want to pass down to subconfigures. The exception being
+# --cache-file=/dev/null, which is used to turn off the use of cache
+# files altogether, and which should be passed on to subconfigures.
+# Also strip program-prefix, program-suffix, and program-transform-name,
+# so that we can pass down a consistent program-transform-name.
+baseargs=
+tbaseargs=
+keep_next=no
+skip_next=no
+eval "set -- $ac_configure_args"
+for ac_arg
+do
+ if test X"$skip_next" = X"yes"; then
+ skip_next=no
+ continue
+ fi
+ if test X"$keep_next" = X"yes"; then
+ case $ac_arg in
+ *\'*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ baseargs="$baseargs '$ac_arg'"
+ tbaseargs="$tbaseargs '$ac_arg'"
+ keep_next=no
+ continue
+ fi
+
+ # Handle separated arguments. Based on the logic generated by
+ # autoconf 2.59.
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ separate_arg=no
+ ;;
+ -*)
+ separate_arg=yes
+ ;;
+ *)
+ separate_arg=no
+ ;;
+ esac
+
+ skip_targ=no
+ case $ac_arg in
+
+ --with-* | --without-*)
+ libopt=`echo "$ac_arg" | sed -e 's,^--[^-_]*[-_],,' -e 's,=.*$,,'`
+
+ case $libopt in
+ *[-_]include)
+ lib=`echo "$libopt" | sed 's,[-_]include$,,'`
+ ;;
+ *[-_]lib)
+ lib=`echo "$libopt" | sed 's,[-_]lib$,,'`
+ ;;
+ *)
+ lib=$libopt
+ ;;
+ esac
+
+
+ case $lib in
+ mpc | mpfr | gmp | cloog)
+ # If we're processing --with-$lib, --with-$lib-include or
+ # --with-$lib-lib, for one of the libs above, and target is
+ # different from host, don't pass the current argument to any
+ # target library's configure.
+ if test x$is_cross_compiler = xyes; then
+ skip_targ=yes
+ fi
+ ;;
+ esac
+ ;;
+ esac
+
+ case "$ac_arg" in
+ --cache-file=/dev/null | \
+ -cache-file=/dev/null )
+ # Handled here to avoid the test to skip args below.
+ baseargs="$baseargs '$ac_arg'"
+ tbaseargs="$tbaseargs '$ac_arg'"
+ # Assert: $separate_arg should always be no.
+ keep_next=$separate_arg
+ ;;
+ --no*)
+ continue
+ ;;
+ --c* | \
+ --sr* | \
+ --ho* | \
+ --bu* | \
+ --t* | \
+ --program-* | \
+ -cache_file* | \
+ -srcdir* | \
+ -host* | \
+ -build* | \
+ -target* | \
+ -program-prefix* | \
+ -program-suffix* | \
+ -program-transform-name* )
+ skip_next=$separate_arg
+ continue
+ ;;
+ -*)
+ # An option. Add it.
+ case $ac_arg in
+ *\'*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ baseargs="$baseargs '$ac_arg'"
+ if test X"$skip_targ" = Xno; then
+ tbaseargs="$tbaseargs '$ac_arg'"
+ fi
+ keep_next=$separate_arg
+ ;;
+ *)
+ # Either a variable assignment, or a nonopt (triplet). Don't
+ # pass it down; let the Makefile handle this.
+ continue
+ ;;
+ esac
+done
+# Remove the initial space we just introduced and, as these will be
+# expanded by make, quote '$'.
+baseargs=`echo "x$baseargs" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
+
+# Add in --program-transform-name, after --program-prefix and
+# --program-suffix have been applied to it. Autoconf has already
+# doubled dollar signs and backslashes in program_transform_name; we want
+# the backslashes un-doubled, and then the entire thing wrapped in single
+# quotes, because this will be expanded first by make and then by the shell.
+# Also, because we want to override the logic in subdir configure scripts to
+# choose program_transform_name, replace any s,x,x, with s,y,y,.
+sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
+${program_transform_name}
+EOF_SED
+gcc_transform_name=`cat conftestsed.out`
+rm -f conftestsed.out
+baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
+tbaseargs="$tbaseargs --program-transform-name='${gcc_transform_name}'"
+if test "$silent" = yes; then
+ baseargs="$baseargs --silent"
+ tbaseargs="$tbaseargs --silent"
+fi
+baseargs="$baseargs --disable-option-checking"
+tbaseargs="$tbaseargs --disable-option-checking"
+
+# Record and document user additions to sub configure arguments.
+
+
+
+
+# For the build-side libraries, we just need to pretend we're native,
+# and not use the same cache file. Multilibs are neither needed nor
+# desired.
+build_configargs="$build_configargs --cache-file=../config.cache ${baseargs}"
+
+# For host modules, accept cache file option, or specification as blank.
+case "${cache_file}" in
+"") # empty
+ cache_file_option="" ;;
+/* | [A-Za-z]:[\\/]* ) # absolute path
+ cache_file_option="--cache-file=${cache_file}" ;;
+*) # relative path
+ cache_file_option="--cache-file=../${cache_file}" ;;
+esac
+
+# Host dirs don't like to share a cache file either, horribly enough.
+# This seems to be due to autoconf 2.5x stupidity.
+host_configargs="$host_configargs --cache-file=./config.cache ${extra_host_args} ${baseargs}"
+
+target_configargs="$target_configargs ${tbaseargs}"
+
+# Passing a --with-cross-host argument lets the target libraries know
+# whether they are being built with a cross-compiler or being built
+# native. However, it would be better to use other mechanisms to make the
+# sorts of decisions they want to make on this basis. Please consider
+# this option to be deprecated. FIXME.
+if test x${is_cross_compiler} = xyes ; then
+ target_configargs="--with-cross-host=${host_noncanonical} ${target_configargs}"
+fi
+
+# Default to --enable-multilib.
+if test x${enable_multilib} = x ; then
+ target_configargs="--enable-multilib ${target_configargs}"
+fi
+
+# Pass --with-newlib if appropriate. Note that target_configdirs has
+# changed from the earlier setting of with_newlib.
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
+ target_configargs="--with-newlib ${target_configargs}"
+fi
+
+# Different target subdirs use different values of certain variables
+# (notably CXX). Worse, multilibs use *lots* of different values.
+# Worse yet, autoconf 2.5x makes some of these 'precious', meaning that
+# it doesn't automatically accept command-line overrides of them.
+# This means it's not safe for target subdirs to share a cache file,
+# which is disgusting, but there you have it. Hopefully this can be
+# fixed in future. It's still worthwhile to use a cache file for each
+# directory. I think.
+
+# Pass the appropriate --build, --host, --target and --cache-file arguments.
+# We need to pass --target, as newer autoconf's requires consistency
+# for target_alias and gcc doesn't manage it consistently.
+target_configargs="--cache-file=./config.cache ${target_configargs}"
+
+FLAGS_FOR_TARGET=
+case " $target_configdirs " in
+ *" newlib "*)
+ case " $target_configargs " in
+ *" --with-newlib "*)
+ case "$target" in
+ *-cygwin*)
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -isystem $$s/winsup/cygwin/include'
+ ;;
+ esac
+
+ # If we're not building GCC, don't discard standard headers.
+ if test -d ${srcdir}/gcc; then
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
+
+ if test "${build}" != "${host}"; then
+ # On Canadian crosses, CC_FOR_TARGET will have already been set
+ # by `configure', so we won't have an opportunity to add -Bgcc/
+ # to it. This is right: we don't want to search that directory
+ # for binaries, but we want the header files in there, so add
+ # them explicitly.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include -isystem $$r/$(HOST_SUBDIR)/gcc/include-fixed'
+
+ # Someone might think of using the pre-installed headers on
+ # Canadian crosses, in case the installed compiler is not fully
+ # compatible with the compiler being built. In this case, it
+ # would be better to flag an error than risking having
+ # incompatible object files being constructed. We can't
+ # guarantee that an error will be flagged, but let's hope the
+ # compiler will do it, when presented with incompatible header
+ # files.
+ fi
+ fi
+
+ case "${target}-${is_cross_compiler}" in
+ i[3456789]86-*-linux*-no)
+ # Here host == target, so we don't need to build gcc,
+ # so we don't want to discard standard headers.
+ FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
+ ;;
+ *)
+ # If we're building newlib, use its generic headers last, but search
+ # for any libc-related directories first (so make it the last -B
+ # switch).
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
+
+ # If we're building libgloss, find the startup file, simulator library
+ # and linker script.
+ case " $target_configdirs " in
+ *" libgloss "*)
+ # Look for startup file, simulator library and maybe linker script.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/'"$libgloss_dir"
+ # Look for libnosys.a in case the target needs it.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys'
+ # Most targets have the linker script in the source directory.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$s/libgloss/'"$libgloss_dir"
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+case "$target" in
+ x86_64-*mingw* | *-w64-mingw*)
+ # MinGW-w64 does not use newlib, nor does it use winsup. It may,
+ # however, use a symlink named 'mingw' in ${prefix} .
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L${prefix}/${target}/lib -L${prefix}/mingw/lib -isystem ${prefix}/${target}/include -isystem ${prefix}/mingw/include'
+ ;;
+ *-mingw*)
+ # MinGW can't be handled as Cygwin above since it does not use newlib.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/mingw -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/mingw/include -isystem $$s/winsup/w32api/include'
+ ;;
+esac
+
+# Allow the user to override the flags for
+# our build compiler if desired.
+if test x"${build}" = x"${host}" ; then
+ CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
+ CXXFLAGS_FOR_BUILD=${CXXFLAGS_FOR_BUILD-${CXXFLAGS}}
+ LDFLAGS_FOR_BUILD=${LDFLAGS_FOR_BUILD-${LDFLAGS}}
+fi
+
+# On Canadian crosses, we'll be searching the right directories for
+# the previously-installed cross compiler, so don't bother to add
+# flags for directories within the install tree of the compiler
+# being built; programs in there won't even run.
+if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
+ # Search for pre-installed headers if nothing else fits.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
+fi
+
+if test "x${use_gnu_ld}" = x &&
+ echo " ${configdirs} " | grep " ld " > /dev/null ; then
+ # Arrange for us to find uninstalled linker scripts.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
+fi
+
+# Search for other target-specific linker scripts and such.
+case "${target}" in
+ mep*)
+ FLAGS_FOR_TARGET="$FLAGS_FOR_TARGET -mlibrary"
+ ;;
+esac
+
+# Makefile fragments.
+for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
+do
+ eval fragval=\$$frag
+ if test $fragval != /dev/null; then
+ eval $frag=${srcdir}/$fragval
+ fi
+done
+
+
+
+
+
+# Miscellanea: directories, flags, etc.
+
+
+
+
+
+
+
+
+# Build module lists & subconfigure args.
+
+
+
+# Host module lists & subconfigure args.
+
+
+
+
+# Target module lists & subconfigure args.
+
+
+
+# Build tools.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Generate default definitions for YACC, M4, LEX and other programs that run
+# on the build machine. These are used if the Makefile can't locate these
+# programs in objdir.
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
+
+for ac_prog in 'bison -y' byacc yacc
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_YACC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$YACC"; then
+ ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_YACC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+YACC=$ac_cv_prog_YACC
+if test -n "$YACC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $YACC" >&5
+$as_echo "$YACC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="$MISSING bison -y"
+
+case " $build_configdirs " in
+ *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
+esac
+
+for ac_prog in bison
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_BISON+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$BISON"; then
+ ac_cv_prog_BISON="$BISON" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_BISON="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+BISON=$ac_cv_prog_BISON
+if test -n "$BISON"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BISON" >&5
+$as_echo "$BISON" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$BISON" && break
+done
+test -n "$BISON" || BISON="$MISSING bison"
+
+case " $build_configdirs " in
+ *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;;
+esac
+
+for ac_prog in gm4 gnum4 m4
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_M4+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$M4"; then
+ ac_cv_prog_M4="$M4" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_M4="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+M4=$ac_cv_prog_M4
+if test -n "$M4"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $M4" >&5
+$as_echo "$M4" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$M4" && break
+done
+test -n "$M4" || M4="$MISSING m4"
+
+case " $build_configdirs " in
+ *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;;
+esac
+
+for ac_prog in flex lex
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_LEX+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_LEX="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LEX=$ac_cv_prog_LEX
+if test -n "$LEX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LEX" >&5
+$as_echo "$LEX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$LEX" && break
+done
+test -n "$LEX" || LEX="$MISSING flex"
+
+case " $build_configdirs " in
+ *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+ *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;;
+esac
+
+for ac_prog in flex
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_FLEX+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$FLEX"; then
+ ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_FLEX="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+FLEX=$ac_cv_prog_FLEX
+if test -n "$FLEX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FLEX" >&5
+$as_echo "$FLEX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$FLEX" && break
+done
+test -n "$FLEX" || FLEX="$MISSING flex"
+
+case " $build_configdirs " in
+ *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+esac
+
+for ac_prog in makeinfo
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_MAKEINFO+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$MAKEINFO"; then
+ ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_MAKEINFO="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+MAKEINFO=$ac_cv_prog_MAKEINFO
+if test -n "$MAKEINFO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAKEINFO" >&5
+$as_echo "$MAKEINFO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$MAKEINFO" && break
+done
+test -n "$MAKEINFO" || MAKEINFO="$MISSING makeinfo"
+
+case " $build_configdirs " in
+ *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
+ *)
+
+ # For an installed makeinfo, we require it to be from texinfo 4.7 or
+ # higher, else we use the "missing" dummy.
+ if ${MAKEINFO} --version \
+ | egrep 'texinfo[^0-9]*(4\.([7-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
+ :
+ else
+ MAKEINFO="$MISSING makeinfo"
+ fi
+ ;;
+
+esac
+
+# FIXME: expect and dejagnu may become build tools?
+
+for ac_prog in expect
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_EXPECT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$EXPECT"; then
+ ac_cv_prog_EXPECT="$EXPECT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_EXPECT="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+EXPECT=$ac_cv_prog_EXPECT
+if test -n "$EXPECT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $EXPECT" >&5
+$as_echo "$EXPECT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$EXPECT" && break
+done
+test -n "$EXPECT" || EXPECT="expect"
+
+case " $configdirs " in
+ *" expect "*)
+ test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect'
+ ;;
+esac
+
+for ac_prog in runtest
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_RUNTEST+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RUNTEST"; then
+ ac_cv_prog_RUNTEST="$RUNTEST" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RUNTEST="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RUNTEST=$ac_cv_prog_RUNTEST
+if test -n "$RUNTEST"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RUNTEST" >&5
+$as_echo "$RUNTEST" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$RUNTEST" && break
+done
+test -n "$RUNTEST" || RUNTEST="runtest"
+
+case " $configdirs " in
+ *" dejagnu "*)
+ test $host = $build && RUNTEST='$$s/$(HOST_SUBDIR)/dejagnu/runtest'
+ ;;
+esac
+
+
+# Host tools.
+ncn_tool_prefix=
+test -n "$host_alias" && ncn_tool_prefix=$host_alias-
+ncn_target_tool_prefix=
+test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
+
+
+
+if test -n "$AR"; then
+ ac_cv_prog_AR=$AR
+elif test -n "$ac_cv_prog_AR"; then
+ AR=$ac_cv_prog_AR
+fi
+
+if test -n "$ac_cv_prog_AR"; then
+ for ncn_progname in ar; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AR="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ done
+fi
+
+for ncn_progname in ar; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AR="${ncn_tool_prefix}${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ if test -z "$ac_cv_prog_AR" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AR="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ test -n "$ac_cv_prog_AR" && break
+done
+
+if test -z "$ac_cv_prog_AR" ; then
+ set dummy ar
+ if test $build = $host ; then
+ AR="$2"
+ else
+ AR="${ncn_tool_prefix}$2"
+ fi
+fi
+
+
+
+if test -n "$AS"; then
+ ac_cv_prog_AS=$AS
+elif test -n "$ac_cv_prog_AS"; then
+ AS=$ac_cv_prog_AS
+fi
+
+if test -n "$ac_cv_prog_AS"; then
+ for ncn_progname in as; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AS+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AS="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ done
+fi
+
+for ncn_progname in as; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AS+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AS="${ncn_tool_prefix}${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ if test -z "$ac_cv_prog_AS" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AS+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AS="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ test -n "$ac_cv_prog_AS" && break
+done
+
+if test -z "$ac_cv_prog_AS" ; then
+ set dummy as
+ if test $build = $host ; then
+ AS="$2"
+ else
+ AS="${ncn_tool_prefix}$2"
+ fi
+fi
+
+
+
+if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL=$DLLTOOL
+elif test -n "$ac_cv_prog_DLLTOOL"; then
+ DLLTOOL=$ac_cv_prog_DLLTOOL
+fi
+
+if test -n "$ac_cv_prog_DLLTOOL"; then
+ for ncn_progname in dlltool; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DLLTOOL="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ done
+fi
+
+for ncn_progname in dlltool; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DLLTOOL="${ncn_tool_prefix}${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ if test -z "$ac_cv_prog_DLLTOOL" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DLLTOOL="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ test -n "$ac_cv_prog_DLLTOOL" && break
+done
+
+if test -z "$ac_cv_prog_DLLTOOL" ; then
+ set dummy dlltool
+ if test $build = $host ; then
+ DLLTOOL="$2"
+ else
+ DLLTOOL="${ncn_tool_prefix}$2"
+ fi
+fi
+
+
+
+if test -n "$LD"; then
+ ac_cv_prog_LD=$LD
+elif test -n "$ac_cv_prog_LD"; then
+ LD=$ac_cv_prog_LD
+fi
+
+if test -n "$ac_cv_prog_LD"; then
+ for ncn_progname in ld; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_LD="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LD=$ac_cv_prog_LD
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ done
+fi
+
+for ncn_progname in ld; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_LD="${ncn_tool_prefix}${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LD=$ac_cv_prog_LD
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ if test -z "$ac_cv_prog_LD" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_LD="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LD=$ac_cv_prog_LD
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ test -n "$ac_cv_prog_LD" && break
+done
+
+if test -z "$ac_cv_prog_LD" ; then
+ set dummy ld
+ if test $build = $host ; then
+ LD="$2"
+ else
+ LD="${ncn_tool_prefix}$2"
+ fi
+fi
+
+
+
+if test -n "$LIPO"; then
+ ac_cv_prog_LIPO=$LIPO
+elif test -n "$ac_cv_prog_LIPO"; then
+ LIPO=$ac_cv_prog_LIPO
+fi
+
+if test -n "$ac_cv_prog_LIPO"; then
+ for ncn_progname in lipo; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_LIPO+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_LIPO="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ done
+fi
+
+for ncn_progname in lipo; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_LIPO+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_LIPO="${ncn_tool_prefix}${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi