+ as_bad (_("bad instruction `%s'"), start);
+}
+
+/* md_parse_option
+ Invocation line includes a switch not recognized by the base assembler.
+ See if it's a processor-specific option.
+
+ This routine is somewhat complicated by the need for backwards
+ compatibility (since older releases of gcc can't be changed).
+ The new options try to make the interface as compatible as
+ possible with GCC.
+
+ New options (supported) are:
+
+ -mcpu=<cpu name> Assemble for selected processor
+ -march=<architecture name> Assemble for selected architecture
+ -mfpu=<fpu architecture> Assemble for selected FPU.
+ -EB/-mbig-endian Big-endian
+ -EL/-mlittle-endian Little-endian
+ -k Generate PIC code
+ -mthumb Start in Thumb mode
+ -mthumb-interwork Code supports ARM/Thumb interworking
+
+ For now we will also provide support for:
+
+ -mapcs-32 32-bit Program counter
+ -mapcs-26 26-bit Program counter
+ -macps-float Floats passed in FP registers
+ -mapcs-reentrant Reentrant code
+ -matpcs
+ (sometime these will probably be replaced with -mapcs=<list of options>
+ and -matpcs=<list of options>)
+
+ The remaining options are only supported for back-wards compatibility.
+ Cpu variants, the arm part is optional:
+ -m[arm]1 Currently not supported.
+ -m[arm]2, -m[arm]250 Arm 2 and Arm 250 processor
+ -m[arm]3 Arm 3 processor
+ -m[arm]6[xx], Arm 6 processors
+ -m[arm]7[xx][t][[d]m] Arm 7 processors
+ -m[arm]8[10] Arm 8 processors
+ -m[arm]9[20][tdmi] Arm 9 processors
+ -mstrongarm[110[0]] StrongARM processors
+ -mxscale XScale processors
+ -m[arm]v[2345[t[e]]] Arm architectures
+ -mall All (except the ARM1)
+ FP variants:
+ -mfpa10, -mfpa11 FPA10 and 11 co-processor instructions
+ -mfpe-old (No float load/store multiples)
+ -mvfpxd VFP Single precision
+ -mvfp All VFP
+ -mno-fpu Disable all floating point instructions
+
+ The following CPU names are recognized:
+ arm1, arm2, arm250, arm3, arm6, arm600, arm610, arm620,
+ arm7, arm7m, arm7d, arm7dm, arm7di, arm7dmi, arm70, arm700,
+ arm700i, arm710 arm710t, arm720, arm720t, arm740t, arm710c,
+ arm7100, arm7500, arm7500fe, arm7tdmi, arm8, arm810, arm9,
+ arm920, arm920t, arm940t, arm946, arm966, arm9tdmi, arm9e,
+ arm10t arm10e, arm1020t, arm1020e, arm10200e,
+ strongarm, strongarm110, strongarm1100, strongarm1110, xscale.
+
+ */
+
+const char * md_shortopts = "m:k";
+
+#ifdef ARM_BI_ENDIAN
+#define OPTION_EB (OPTION_MD_BASE + 0)
+#define OPTION_EL (OPTION_MD_BASE + 1)
+#else
+#if TARGET_BYTES_BIG_ENDIAN
+#define OPTION_EB (OPTION_MD_BASE + 0)
+#else
+#define OPTION_EL (OPTION_MD_BASE + 1)
+#endif
+#endif
+
+struct option md_longopts[] =
+{
+#ifdef OPTION_EB
+ {"EB", no_argument, NULL, OPTION_EB},
+#endif
+#ifdef OPTION_EL
+ {"EL", no_argument, NULL, OPTION_EL},
+#endif
+ {NULL, no_argument, NULL, 0}
+};
+
+size_t md_longopts_size = sizeof (md_longopts);
+
+struct arm_option_table
+{
+ char *option; /* Option name to match. */
+ char *help; /* Help information. */
+ int *var; /* Variable to change. */
+ int value; /* What to change it to. */
+ char *deprecated; /* If non-null, print this message. */
+};
+
+struct arm_option_table arm_opts[] =
+{
+ {"k", N_("generate PIC code"), &pic_code, 1, NULL},
+ {"mthumb", N_("assemble Thumb code"), &thumb_mode, 1, NULL},
+ {"mthumb-interwork", N_("support ARM/Thumb interworking"),
+ &support_interwork, 1, NULL},
+ {"moabi", N_("use old ABI (ELF only)"), &target_oabi, 1, NULL},
+ {"mapcs-32", N_("code uses 32-bit program counter"), &uses_apcs_26, 0, NULL},
+ {"mapcs-26", N_("code uses 26-bit program counter"), &uses_apcs_26, 1, NULL},
+ {"mapcs-float", N_("floating point args are in fp regs"), &uses_apcs_float,
+ 1, NULL},
+ {"mapcs-reentrant", N_("re-entrant code"), &pic_code, 1, NULL},
+ {"matpcs", N_("code is ATPCS conformant"), &atpcs, 1, NULL},
+ {"mbig-endian", N_("assemble for big-endian"), &target_big_endian, 1, NULL},
+ {"mlittle-endian", N_("assemble for little-endian"), &target_big_endian, 1,
+ NULL},
+
+ /* These are recognized by the assembler, but have no affect on code. */
+ {"mapcs-frame", N_("use frame pointer"), NULL, 0, NULL},
+ {"mapcs-stack-check", N_("use stack size checking"), NULL, 0, NULL},
+
+ /* DON'T add any new processors to this list -- we want the whole list
+ to go away... Add them to the processors table instead. */
+ {"marm1", NULL, &legacy_cpu, ARM_ARCH_V1, N_("use -mcpu=arm1")},
+ {"m1", NULL, &legacy_cpu, ARM_ARCH_V1, N_("use -mcpu=arm1")},
+ {"marm2", NULL, &legacy_cpu, ARM_ARCH_V2, N_("use -mcpu=arm2")},
+ {"m2", NULL, &legacy_cpu, ARM_ARCH_V2, N_("use -mcpu=arm2")},
+ {"marm250", NULL, &legacy_cpu, ARM_ARCH_V2S, N_("use -mcpu=arm250")},
+ {"m250", NULL, &legacy_cpu, ARM_ARCH_V2S, N_("use -mcpu=arm250")},
+ {"marm3", NULL, &legacy_cpu, ARM_ARCH_V2S, N_("use -mcpu=arm3")},
+ {"m3", NULL, &legacy_cpu, ARM_ARCH_V2S, N_("use -mcpu=arm3")},
+ {"marm6", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm6")},
+ {"m6", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm6")},
+ {"marm600", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm600")},
+ {"m600", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm600")},
+ {"marm610", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm610")},
+ {"m610", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm610")},
+ {"marm620", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm620")},
+ {"m620", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm620")},
+ {"marm7", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7")},
+ {"m7", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7")},
+ {"marm70", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm70")},
+ {"m70", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm70")},
+ {"marm700", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm700")},
+ {"m700", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm700")},
+ {"marm700i", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm700i")},
+ {"m700i", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm700i")},
+ {"marm710", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm710")},
+ {"m710", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm710")},
+ {"marm710c", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm710c")},
+ {"m710c", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm710c")},
+ {"marm720", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm720")},
+ {"m720", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm720")},
+ {"marm7d", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7d")},
+ {"m7d", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7d")},
+ {"marm7di", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7di")},
+ {"m7di", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7di")},
+ {"marm7m", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -mcpu=arm7m")},
+ {"m7m", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -mcpu=arm7m")},
+ {"marm7dm", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -mcpu=arm7dm")},
+ {"m7dm", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -mcpu=arm7dm")},
+ {"marm7dmi", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -mcpu=arm7dmi")},
+ {"m7dmi", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -mcpu=arm7dmi")},
+ {"marm7100", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7100")},
+ {"m7100", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7100")},
+ {"marm7500", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7500")},
+ {"m7500", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7500")},
+ {"marm7500fe", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7500fe")},
+ {"m7500fe", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7500fe")},
+ {"marm7t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm7tdmi")},
+ {"m7t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm7tdmi")},
+ {"marm7tdmi", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm7tdmi")},
+ {"m7tdmi", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm7tdmi")},
+ {"marm710t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm710t")},
+ {"m710t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm710t")},
+ {"marm720t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm720t")},
+ {"m720t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm720t")},
+ {"marm740t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm740t")},
+ {"m740t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm740t")},
+ {"marm8", NULL, &legacy_cpu, ARM_ARCH_V4, N_("use -mcpu=arm8")},
+ {"m8", NULL, &legacy_cpu, ARM_ARCH_V4, N_("use -mcpu=arm8")},
+ {"marm810", NULL, &legacy_cpu, ARM_ARCH_V4, N_("use -mcpu=arm810")},
+ {"m810", NULL, &legacy_cpu, ARM_ARCH_V4, N_("use -mcpu=arm810")},
+ {"marm9", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm9")},
+ {"m9", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm9")},
+ {"marm9tdmi", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm9tdmi")},
+ {"m9tdmi", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm9tdmi")},
+ {"marm920", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm920")},
+ {"m920", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm920")},
+ {"marm940", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm940")},
+ {"m940", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm940")},
+ {"mstrongarm", NULL, &legacy_cpu, ARM_ARCH_V4, N_("use -mcpu=strongarm")},
+ {"mstrongarm110", NULL, &legacy_cpu, ARM_ARCH_V4,
+ N_("use -mcpu=strongarm110")},
+ {"mstrongarm1100", NULL, &legacy_cpu, ARM_ARCH_V4,
+ N_("use -mcpu=strongarm1100")},
+ {"mstrongarm1110", NULL, &legacy_cpu, ARM_ARCH_V4,
+ N_("use -mcpu=strongarm1110")},
+ {"mxscale", NULL, &legacy_cpu, ARM_ARCH_XSCALE, N_("use -mcpu=xscale")},
+ {"mall", NULL, &legacy_cpu, ARM_ANY, N_("use -mcpu=all")},
+
+ /* Architecture variants -- don't add any more to this list either. */
+ {"mv2", NULL, &legacy_cpu, ARM_ARCH_V2, N_("use -march=armv2")},
+ {"marmv2", NULL, &legacy_cpu, ARM_ARCH_V2, N_("use -march=armv2")},
+ {"mv2a", NULL, &legacy_cpu, ARM_ARCH_V2S, N_("use -march=armv2a")},
+ {"marmv2a", NULL, &legacy_cpu, ARM_ARCH_V2S, N_("use -march=armv2a")},
+ {"mv3", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -march=armv3")},
+ {"marmv3", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -march=armv3")},
+ {"mv3m", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -march=armv3m")},
+ {"marmv3m", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -march=armv3m")},
+ {"mv4", NULL, &legacy_cpu, ARM_ARCH_V4, N_("use -march=armv4")},
+ {"marmv4", NULL, &legacy_cpu, ARM_ARCH_V4, N_("use -march=armv4")},
+ {"mv4t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -march=armv4t")},
+ {"marmv4t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -march=armv4t")},
+ {"mv5", NULL, &legacy_cpu, ARM_ARCH_V5, N_("use -march=armv5")},
+ {"marmv5", NULL, &legacy_cpu, ARM_ARCH_V5, N_("use -march=armv5")},
+ {"mv5t", NULL, &legacy_cpu, ARM_ARCH_V5T, N_("use -march=armv5t")},
+ {"marmv5t", NULL, &legacy_cpu, ARM_ARCH_V5T, N_("use -march=armv5t")},
+ {"mv5e", NULL, &legacy_cpu, ARM_ARCH_V5TE, N_("use -march=armv5te")},
+ {"marmv5e", NULL, &legacy_cpu, ARM_ARCH_V5TE, N_("use -march=armv5te")},
+
+ /* Floating point variants -- don't add any more to this list either. */
+ {"mfpe-old", NULL, &legacy_fpu, FPU_ARCH_FPE, N_("use -mfpu=fpe")},
+ {"mfpa10", NULL, &legacy_fpu, FPU_ARCH_FPA, N_("use -mfpu=fpa10")},
+ {"mfpa11", NULL, &legacy_fpu, FPU_ARCH_FPA, N_("use -mfpu=fpa11")},
+ {"mno-fpu", NULL, &legacy_fpu, 0,
+ N_("use either -mfpu=softfpa or -mfpu=softvfp")},
+
+ {NULL, NULL, NULL, 0, NULL}
+};
+
+struct arm_cpu_option_table
+{
+ char *name;
+ int value;
+ /* For some CPUs we assume an FPU unless the user explicitly sets
+ -mfpu=... */
+ int default_fpu;
+};
+
+/* This list should, at a minimum, contain all the cpu names
+ recognized by GCC. */
+static struct arm_cpu_option_table arm_cpus[] =
+{
+ {"all", ARM_ANY, FPU_ARCH_FPA},
+ {"arm1", ARM_ARCH_V1, FPU_ARCH_FPA},
+ {"arm2", ARM_ARCH_V2, FPU_ARCH_FPA},
+ {"arm250", ARM_ARCH_V2S, FPU_ARCH_FPA},
+ {"arm3", ARM_ARCH_V2S, FPU_ARCH_FPA},
+ {"arm6", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm60", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm600", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm610", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm620", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm7", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm7m", ARM_ARCH_V3M, FPU_ARCH_FPA},
+ {"arm7d", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm7dm", ARM_ARCH_V3M, FPU_ARCH_FPA},
+ {"arm7di", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm7dmi", ARM_ARCH_V3M, FPU_ARCH_FPA},
+ {"arm70", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm700", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm700i", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm710", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm710t", ARM_ARCH_V4T, FPU_ARCH_FPA},
+ {"arm720", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm720t", ARM_ARCH_V4T, FPU_ARCH_FPA},
+ {"arm740t", ARM_ARCH_V4T, FPU_ARCH_FPA},
+ {"arm710c", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm7100", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm7500", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm7500fe", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"arm7t", ARM_ARCH_V4T, FPU_ARCH_FPA},
+ {"arm7tdmi", ARM_ARCH_V4T, FPU_ARCH_FPA},
+ {"arm8", ARM_ARCH_V4, FPU_ARCH_FPA},
+ {"arm810", ARM_ARCH_V4, FPU_ARCH_FPA},
+ {"strongarm", ARM_ARCH_V4, FPU_ARCH_FPA},
+ {"strongarm1", ARM_ARCH_V4, FPU_ARCH_FPA},
+ {"strongarm110", ARM_ARCH_V4, FPU_ARCH_FPA},
+ {"strongarm1100", ARM_ARCH_V4, FPU_ARCH_FPA},
+ {"strongarm1110", ARM_ARCH_V4, FPU_ARCH_FPA},
+ {"arm9", ARM_ARCH_V4T, FPU_ARCH_FPA},
+ {"arm920", ARM_ARCH_V4T, FPU_ARCH_FPA},
+ {"arm920t", ARM_ARCH_V4T, FPU_ARCH_FPA},
+ {"arm922t", ARM_ARCH_V4T, FPU_ARCH_FPA},
+ {"arm940t", ARM_ARCH_V4T, FPU_ARCH_FPA},
+ {"arm9tdmi", ARM_ARCH_V4T, FPU_ARCH_FPA},
+ /* For V5 or later processors we default to using VFP; but the user
+ should really set the FPU type explicitly. */
+ {"arm9e-r0", ARM_ARCH_V5TExP, FPU_ARCH_VFP_V2},
+ {"arm9e", ARM_ARCH_V5TE, FPU_ARCH_VFP_V2},
+ {"arm926ej", ARM_ARCH_V5TEJ, FPU_ARCH_VFP_V2},
+ {"arm946e-r0", ARM_ARCH_V5TExP, FPU_ARCH_VFP_V2},
+ {"arm946e", ARM_ARCH_V5TE, FPU_ARCH_VFP_V2},
+ {"arm966e-r0", ARM_ARCH_V5TExP, FPU_ARCH_VFP_V2},
+ {"arm966e", ARM_ARCH_V5TE, FPU_ARCH_VFP_V2},
+ {"arm10t", ARM_ARCH_V5T, FPU_ARCH_VFP_V1},
+ {"arm10e", ARM_ARCH_V5TE, FPU_ARCH_VFP_V2},
+ {"arm1020", ARM_ARCH_V5TE, FPU_ARCH_VFP_V2},
+ {"arm1020t", ARM_ARCH_V5T, FPU_ARCH_VFP_V1},
+ {"arm1020e", ARM_ARCH_V5TE, FPU_ARCH_VFP_V2},
+ /* ??? XSCALE is really an architecture. */
+ {"xscale", ARM_ARCH_XSCALE, FPU_ARCH_VFP_V2},
+ {"i80200", ARM_ARCH_XSCALE, FPU_ARCH_VFP_V2},
+ /* Maverick */
+ {"ep9312", ARM_ARCH_V4T | ARM_CEXT_MAVERICK, FPU_NONE},
+ {NULL, 0, 0}
+};
+
+struct arm_arch_option_table
+{
+ char *name;
+ int value;
+ int default_fpu;
+};
+
+/* This list should, at a minimum, contain all the architecture names
+ recognized by GCC. */
+static struct arm_arch_option_table arm_archs[] =
+{
+ {"all", ARM_ANY, FPU_ARCH_FPA},
+ {"armv1", ARM_ARCH_V1, FPU_ARCH_FPA},
+ {"armv2", ARM_ARCH_V2, FPU_ARCH_FPA},
+ {"armv2a", ARM_ARCH_V2S, FPU_ARCH_FPA},
+ {"armv2s", ARM_ARCH_V2S, FPU_ARCH_FPA},
+ {"armv3", ARM_ARCH_V3, FPU_ARCH_FPA},
+ {"armv3m", ARM_ARCH_V3M, FPU_ARCH_FPA},
+ {"armv4", ARM_ARCH_V4, FPU_ARCH_FPA},
+ {"armv4xm", ARM_ARCH_V4xM, FPU_ARCH_FPA},
+ {"armv4t", ARM_ARCH_V4T, FPU_ARCH_FPA},
+ {"armv4txm", ARM_ARCH_V4TxM, FPU_ARCH_FPA},
+ {"armv5", ARM_ARCH_V5, FPU_ARCH_VFP},
+ {"armv5t", ARM_ARCH_V5T, FPU_ARCH_VFP},
+ {"armv5txm", ARM_ARCH_V5TxM, FPU_ARCH_VFP},
+ {"armv5te", ARM_ARCH_V5TE, FPU_ARCH_VFP},
+ {"armv5texp", ARM_ARCH_V5TExP, FPU_ARCH_VFP},
+ {"armv5tej", ARM_ARCH_V5TEJ, FPU_ARCH_VFP},
+ {"xscale", ARM_ARCH_XSCALE, FPU_ARCH_VFP},
+ {NULL, 0, 0}
+};
+
+/* ISA extensions in the co-processor space. */
+struct arm_arch_extension_table
+{
+ char *name;
+ int value;
+};
+
+static struct arm_arch_extension_table arm_extensions[] =
+{
+ {"maverick", ARM_CEXT_MAVERICK},
+ {"xscale", ARM_CEXT_XSCALE},
+ {NULL, 0}
+};
+
+struct arm_fpu_option_table
+{
+ char *name;
+ int value;
+};
+
+/* This list should, at a minimum, contain all the fpu names
+ recognized by GCC. */
+static struct arm_fpu_option_table arm_fpus[] =
+{
+ {"softfpa", FPU_NONE},
+ {"fpe", FPU_ARCH_FPE},
+ {"fpe2", FPU_ARCH_FPE},
+ {"fpe3", FPU_ARCH_FPA}, /* Third release supports LFM/SFM. */
+ {"fpa", FPU_ARCH_FPA},
+ {"fpa10", FPU_ARCH_FPA},
+ {"fpa11", FPU_ARCH_FPA},
+ {"arm7500fe", FPU_ARCH_FPA},
+ {"softvfp", FPU_ARCH_VFP},
+ {"softvfp+vfp", FPU_ARCH_VFP_V2},
+ {"vfp", FPU_ARCH_VFP_V2},
+ {"vfp9", FPU_ARCH_VFP_V2},
+ {"vfp10", FPU_ARCH_VFP_V2},
+ {"vfp10-r0", FPU_ARCH_VFP_V1},
+ {"vfpxd", FPU_ARCH_VFP_V1xD},
+ {"arm1020t", FPU_ARCH_VFP_V1},
+ {"arm1020e", FPU_ARCH_VFP_V2},
+ {NULL, 0}
+};
+
+struct arm_long_option_table
+{
+ char *option; /* Substring to match. */
+ char *help; /* Help information. */
+ int (*func) PARAMS ((char *subopt)); /* Function to decode sub-option. */
+ char *deprecated; /* If non-null, print this message. */
+};
+
+static int
+arm_parse_extension (str, opt_p)
+ char *str;
+ int *opt_p;
+{
+ while (str != NULL && *str != 0)
+ {
+ struct arm_arch_extension_table *opt;
+ char *ext;
+ int optlen;
+
+ if (*str != '+')
+ {
+ as_bad (_("invalid architectural extension"));
+ return 0;
+ }
+
+ str++;
+ ext = strchr (str, '+');
+
+ if (ext != NULL)
+ optlen = ext - str;
+ else
+ optlen = strlen (str);
+
+ if (optlen == 0)
+ {
+ as_bad (_("missing architectural extension"));
+ return 0;
+ }
+
+ for (opt = arm_extensions; opt->name != NULL; opt++)
+ if (strncmp (opt->name, str, optlen) == 0)
+ {
+ *opt_p |= opt->value;
+ break;
+ }
+
+ if (opt->name == NULL)
+ {
+ as_bad (_("unknown architectural extnsion `%s'"), str);
+ return 0;
+ }
+
+ str = ext;
+ };
+
+ return 1;
+}
+
+static int
+arm_parse_cpu (str)
+ char *str;
+{
+ struct arm_cpu_option_table *opt;
+ char *ext = strchr (str, '+');
+ int optlen;
+
+ if (ext != NULL)
+ optlen = ext - str;
+ else
+ optlen = strlen (str);
projects / deliverable / binutils-gdb.git / blobdiff