Teach GDB about targets that can tell whether a trap is a breakpoint event

[deliverable/binutils-gdb.git] / gdb / breakpoint.h

diff --git a/gdb/breakpoint.h b/gdb/breakpoint.h
index a044c6b3667fd81e73ba6a2a20d6678113c46f49..85c224081722f2333608d662167c41e11a3a08bf 100644 (file)
--- a/gdb/breakpoint.h
+++ b/gdb/breakpoint.h
@@ -1,6 +1,5 @@
 /* Data structures associated with breakpoints in GDB.
 /* Data structures associated with breakpoints in GDB.

-   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-   2002, 2003, 2004, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+   Copyright (C) 1992-2015 Free Software Foundation, Inc.

 
    This file is part of GDB.
 
 
    This file is part of GDB.
 


@@ -23,31 +22,38 @@
 #include "frame.h"
 #include "value.h"
 #include "vec.h"
 #include "frame.h"
 #include "value.h"
 #include "vec.h"

+#include "ax.h"
+#include "command.h"
+#include "break-common.h"
+#include "probe.h"

 
 struct value;
 struct block;
 
 struct value;
 struct block;

-struct breakpoint_object;
-
-/* This is the maximum number of bytes a breakpoint instruction can take.
-   Feel free to increase it.  It's just used in a few places to size
-   arrays that should be independent of the target architecture.  */
+struct gdbpy_breakpoint_object;
+struct gdbscm_breakpoint_object;
+struct get_number_or_range_state;
+struct thread_info;
+struct bpstats;
+struct bp_location;
+struct linespec_result;
+struct linespec_sals;
+
+/* This is the maximum number of bytes a breakpoint instruction can
+   take.  Feel free to increase it.  It's just used in a few places to
+   size arrays that should be independent of the target
+   architecture.  */

 
 #define        BREAKPOINT_MAX  16
 \f
 
 /* Type of breakpoint.  */
 
 #define        BREAKPOINT_MAX  16
 \f
 
 /* Type of breakpoint.  */

-/* FIXME In the future, we should fold all other breakpoint-like things into
-   here.  This includes:
-
-   * single-step (for machines where we have to simulate single stepping)
-   (probably, though perhaps it is better for it to look as much as
-   possible like a single-step to wait_for_inferior).  */

 
 enum bptype
   {
 
 enum bptype
   {

-    bp_none = 0,               /* Eventpoint has been deleted. */
+    bp_none = 0,               /* Eventpoint has been deleted */

     bp_breakpoint,             /* Normal breakpoint */
     bp_hardware_breakpoint,    /* Hardware assisted breakpoint */
     bp_breakpoint,             /* Normal breakpoint */
     bp_hardware_breakpoint,    /* Hardware assisted breakpoint */

+    bp_single_step,            /* Software single-step */

     bp_until,                  /* used by until command */
     bp_finish,                 /* used by finish command */
     bp_watchpoint,             /* Watchpoint */
     bp_until,                  /* used by until command */
     bp_finish,                 /* used by finish command */
     bp_watchpoint,             /* Watchpoint */


@@ -57,6 +63,12 @@ enum bptype
     bp_longjmp,                        /* secret breakpoint to find longjmp() */
     bp_longjmp_resume,         /* secret breakpoint to escape longjmp() */
 
     bp_longjmp,                        /* secret breakpoint to find longjmp() */
     bp_longjmp_resume,         /* secret breakpoint to escape longjmp() */
 

+    /* Breakpoint placed to the same location(s) like bp_longjmp but used to
+       protect against stale DUMMY_FRAME.  Multiple bp_longjmp_call_dummy and
+       one bp_call_dummy are chained together by related_breakpoint for each
+       DUMMY_FRAME.  */
+    bp_longjmp_call_dummy,
+

     /* An internal breakpoint that is installed on the unwinder's
        debug hook.  */
     bp_exception,
     /* An internal breakpoint that is installed on the unwinder's
        debug hook.  */
     bp_exception,


@@ -64,10 +76,14 @@ enum bptype
        exception will land.  */
     bp_exception_resume,
 
        exception will land.  */
     bp_exception_resume,
 

-    /* Used by wait_for_inferior for stepping over subroutine calls, for
-       stepping over signal handlers, and for skipping prologues.  */
+    /* Used by wait_for_inferior for stepping over subroutine calls,
+       and for skipping prologues.  */

     bp_step_resume,
 
     bp_step_resume,
 

+    /* Used by wait_for_inferior for stepping over signal
+       handlers.  */
+    bp_hp_step_resume,
+

     /* Used to detect when a watchpoint expression has gone out of
        scope.  These breakpoints are usually not visible to the user.
 
     /* Used to detect when a watchpoint expression has gone out of
        scope.  These breakpoints are usually not visible to the user.
 


@@ -82,13 +98,8 @@ enum bptype
        3) It can never be disabled.  */
     bp_watchpoint_scope,
 
        3) It can never be disabled.  */
     bp_watchpoint_scope,
 

-    /* The breakpoint at the end of a call dummy.  */
-    /* FIXME: What if the function we are calling longjmp()s out of the
-       call, or the user gets out with the "return" command?  We currently
-       have no way of cleaning up the breakpoint in these (obscure) situations.
-       (Probably can solve this by noticing longjmp, "return", etc., it's
-       similar to noticing when a watchpoint on a local variable goes out
-       of scope (with hardware support for watchpoints)).  */
+    /* The breakpoint at the end of a call dummy.  See bp_longjmp_call_dummy it
+       is chained with by related_breakpoint.  */

     bp_call_dummy,
 
     /* A breakpoint set on std::terminate, that is used to catch
     bp_call_dummy,
 
     /* A breakpoint set on std::terminate, that is used to catch


@@ -142,56 +153,70 @@ enum bptype
     bp_fast_tracepoint,
     bp_static_tracepoint,
 
     bp_fast_tracepoint,
     bp_static_tracepoint,
 

+    /* A dynamic printf stops at the given location, does a formatted
+       print, then automatically continues.  (Although this is sort of
+       like a macro packaging up standard breakpoint functionality,
+       GDB doesn't have a way to construct types of breakpoint from
+       elements of behavior.)  */
+    bp_dprintf,
+

     /* Event for JIT compiled code generation or deletion.  */
     bp_jit_event,
     /* Event for JIT compiled code generation or deletion.  */
     bp_jit_event,

+
+    /* Breakpoint is placed at the STT_GNU_IFUNC resolver.  When hit GDB
+       inserts new bp_gnu_ifunc_resolver_return at the caller.
+       bp_gnu_ifunc_resolver is still being kept here as a different thread
+       may still hit it before bp_gnu_ifunc_resolver_return is hit by the
+       original thread.  */
+    bp_gnu_ifunc_resolver,
+
+    /* On its hit GDB now know the resolved address of the target
+       STT_GNU_IFUNC function.  Associated bp_gnu_ifunc_resolver can be
+       deleted now and the breakpoint moved to the target function entry
+       point.  */
+    bp_gnu_ifunc_resolver_return,

   };
 
   };
 

-/* States of enablement of breakpoint. */
+/* States of enablement of breakpoint.  */

 
 enum enable_state
   {
 
 enum enable_state
   {

-    bp_disabled,       /* The eventpoint is inactive, and cannot trigger. */
-    bp_enabled,                /* The eventpoint is active, and can trigger. */
-    bp_call_disabled,  /* The eventpoint has been disabled while a call 
-                          into the inferior is "in flight", because some 
-                          eventpoints interfere with the implementation of 
-                          a call on some targets.  The eventpoint will be 
-                          automatically enabled and reset when the call 
-                          "lands" (either completes, or stops at another 
-                          eventpoint). */
-    bp_startup_disabled,/* The eventpoint has been disabled during inferior
-                          startup.  This is necessary on some targets where
-                          the main executable will get relocated during
-                          startup, making breakpoint addresses invalid.
-                          The eventpoint will be automatically enabled and
-                          reset once inferior startup is complete.  */
-    bp_permanent       /* There is a breakpoint instruction hard-wired into
-                          the target's code.  Don't try to write another
-                          breakpoint instruction on top of it, or restore
-                          its value.  Step over it using the architecture's
-                          SKIP_INSN macro.  */
+    bp_disabled,        /* The eventpoint is inactive, and cannot
+                           trigger.  */
+    bp_enabled,                 /* The eventpoint is active, and can
+                           trigger.  */
+    bp_call_disabled,   /* The eventpoint has been disabled while a
+                           call into the inferior is "in flight",
+                           because some eventpoints interfere with
+                           the implementation of a call on some
+                           targets.  The eventpoint will be
+                           automatically enabled and reset when the
+                           call "lands" (either completes, or stops
+                           at another eventpoint).  */

   };
 
 
   };
 
 

-/* Disposition of breakpoint.  Ie: what to do after hitting it. */
+/* Disposition of breakpoint.  Ie: what to do after hitting it.  */

 
 enum bpdisp
   {
     disp_del,                  /* Delete it */
 
 enum bpdisp
   {
     disp_del,                  /* Delete it */

-    disp_del_at_next_stop,     /* Delete at next stop, whether hit or not */
+    disp_del_at_next_stop,     /* Delete at next stop, 
+                                  whether hit or not */

     disp_disable,              /* Disable it */
     disp_donttouch             /* Leave it alone */
   };
 
     disp_disable,              /* Disable it */
     disp_donttouch             /* Leave it alone */
   };
 

-enum target_hw_bp_type
+/* Status of breakpoint conditions used when synchronizing
+   conditions with the target.  */
+
+enum condition_status

   {
   {

-    hw_write   = 0,            /* Common  HW watchpoint */
-    hw_read    = 1,            /* Read    HW watchpoint */
-    hw_access  = 2,            /* Access  HW watchpoint */
-    hw_execute = 3             /* Execute HW breakpoint */
+    condition_unchanged = 0,
+    condition_modified,
+    condition_updated

   };
 
   };
 

-

 /* Information used by targets to insert and remove breakpoints.  */
 
 struct bp_target_info
 /* Information used by targets to insert and remove breakpoints.  */
 
 struct bp_target_info


@@ -199,13 +224,20 @@ struct bp_target_info
   /* Address space at which the breakpoint was placed.  */
   struct address_space *placed_address_space;
 
   /* Address space at which the breakpoint was placed.  */
   struct address_space *placed_address_space;
 

-  /* Address at which the breakpoint was placed.  This is normally the
-     same as ADDRESS from the bp_location, except when adjustment
-     happens in gdbarch_breakpoint_from_pc.  The most common form of
-     adjustment is stripping an alternate ISA marker from the PC which
-     is used to determine the type of breakpoint to insert.  */
+  /* Address at which the breakpoint was placed.  This is normally
+     the same as REQUESTED_ADDRESS, except when adjustment happens in
+     gdbarch_breakpoint_from_pc.  The most common form of adjustment
+     is stripping an alternate ISA marker from the PC which is used
+     to determine the type of breakpoint to insert.  */

   CORE_ADDR placed_address;
 
   CORE_ADDR placed_address;
 

+  /* Address at which the breakpoint was requested.  */
+  CORE_ADDR reqstd_address;
+
+  /* If this is a ranged breakpoint, then this field contains the
+     length of the range that will be watched for execution.  */
+  int length;
+

   /* If the breakpoint lives in memory and reading that memory would
      give back the breakpoint, instead of the original contents, then
      the original contents are cached here.  Only SHADOW_LEN bytes of
   /* If the breakpoint lives in memory and reading that memory would
      give back the breakpoint, instead of the original contents, then
      the original contents are cached here.  Only SHADOW_LEN bytes of


@@ -216,12 +248,24 @@ struct bp_target_info
   int shadow_len;
 
   /* The size of the placed breakpoint, according to
   int shadow_len;
 
   /* The size of the placed breakpoint, according to

-     gdbarch_breakpoint_from_pc, when the breakpoint was inserted.  This is
-     generally the same as SHADOW_LEN, unless we did not need
+     gdbarch_breakpoint_from_pc, when the breakpoint was inserted.
+     This is generally the same as SHADOW_LEN, unless we did not need

      to read from the target to implement the memory breakpoint
      to read from the target to implement the memory breakpoint

-     (e.g. if a remote stub handled the details).  We may still
-     need the size to remove the breakpoint safely.  */
+     (e.g. if a remote stub handled the details).  We may still need
+     the size to remove the breakpoint safely.  */

   int placed_size;
   int placed_size;

+
+  /* Vector of conditions the target should evaluate if it supports target-side
+     breakpoint conditions.  */
+  VEC(agent_expr_p) *conditions;
+
+  /* Vector of commands the target should evaluate if it supports
+     target-side breakpoint commands.  */
+  VEC(agent_expr_p) *tcommands;
+
+  /* Flag that is true if the breakpoint should be left in place even
+     when GDB is not connected.  */
+  int persist;

 };
 
 /* GDB maintains two types of information about each breakpoint (or
 };
 
 /* GDB maintains two types of information about each breakpoint (or


@@ -245,12 +289,26 @@ enum bp_loc_type
   bp_loc_other                 /* Miscellaneous...  */
 };
 
   bp_loc_other                 /* Miscellaneous...  */
 };
 

+/* This structure is a collection of function pointers that, if
+   available, will be called instead of performing the default action
+   for this bp_loc_type.  */
+
+struct bp_location_ops
+{
+  /* Destructor.  Releases everything from SELF (but not SELF
+     itself).  */
+  void (*dtor) (struct bp_location *self);
+};
+

 struct bp_location
 {
   /* Chain pointer to the next breakpoint location for
      the same parent breakpoint.  */
   struct bp_location *next;
 
 struct bp_location
 {
   /* Chain pointer to the next breakpoint location for
      the same parent breakpoint.  */
   struct bp_location *next;
 

+  /* Methods associated with this location.  */
+  const struct bp_location_ops *ops;
+

   /* The reference count.  */
   int refc;
 
   /* The reference count.  */
   int refc;
 


@@ -274,6 +332,33 @@ struct bp_location
      the owner breakpoint object.  */
   struct expression *cond;
 
      the owner breakpoint object.  */
   struct expression *cond;
 

+  /* Conditional expression in agent expression
+     bytecode form.  This is used for stub-side breakpoint
+     condition evaluation.  */
+  struct agent_expr *cond_bytecode;
+
+  /* Signals that the condition has changed since the last time
+     we updated the global location list.  This means the condition
+     needs to be sent to the target again.  This is used together
+     with target-side breakpoint conditions.
+
+     condition_unchanged: It means there has been no condition changes.
+
+     condition_modified: It means this location had its condition modified.
+
+     condition_updated: It means we already marked all the locations that are
+     duplicates of this location and thus we don't need to call
+     force_breakpoint_reinsertion (...) for this location.  */
+
+  enum condition_status condition_changed;
+
+  struct agent_expr *cmd_bytecode;
+
+  /* Signals that breakpoint conditions and/or commands need to be
+     re-synched with the target.  This has no use other than
+     target-side breakpoints.  */
+  char needs_update;
+

   /* This location's address is in an unloaded solib, and so this
      location should not be inserted.  It will be automatically
      enabled when that solib is loaded.  */
   /* This location's address is in an unloaded solib, and so this
      location should not be inserted.  It will be automatically
      enabled when that solib is loaded.  */


@@ -285,8 +370,19 @@ struct bp_location
   /* Nonzero if this breakpoint is now inserted.  */
   char inserted;
 
   /* Nonzero if this breakpoint is now inserted.  */
   char inserted;
 

+  /* Nonzero if this is a permanent breakpoint.  There is a breakpoint
+     instruction hard-wired into the target's code.  Don't try to
+     write another breakpoint instruction on top of it, or restore its
+     value.  Step over it using the architecture's
+     gdbarch_skip_permanent_breakpoint method.  */
+  char permanent;
+

   /* Nonzero if this is not the first breakpoint in the list
   /* Nonzero if this is not the first breakpoint in the list

-     for the given address.  */
+     for the given address.  location of tracepoint can _never_
+     be duplicated with other locations of tracepoints and other
+     kinds of breakpoints, because two locations at the same
+     address may have different actions, so both of these locations
+     should be downloaded and so that `tfind N' always works.  */

   char duplicate;
 
   /* If we someday support real thread-specific breakpoints, then
   char duplicate;
 
   /* If we someday support real thread-specific breakpoints, then


@@ -313,14 +409,17 @@ struct bp_location
      bp_loc_other.  */
   CORE_ADDR address;
 
      bp_loc_other.  */
   CORE_ADDR address;
 

-  /* For hardware watchpoints, the size of data ad ADDRESS being watches.  */
+  /* For hardware watchpoints, the size of the memory region being
+     watched.  For hardware ranged breakpoints, the size of the
+     breakpoint range.  */

   int length;
 
   int length;
 

-  /* Type of hardware watchpoint. */
+  /* Type of hardware watchpoint.  */

   enum target_hw_bp_type watchpoint_type;
 
   /* For any breakpoint type with an address, this is the section
   enum target_hw_bp_type watchpoint_type;
 
   /* For any breakpoint type with an address, this is the section

-     associated with the address.  Used primarily for overlay debugging.  */
+     associated with the address.  Used primarily for overlay
+     debugging.  */

   struct obj_section *section;
 
   /* Address at which breakpoint was requested, either by the user or
   struct obj_section *section;
 
   /* Address at which breakpoint was requested, either by the user or


@@ -331,6 +430,15 @@ struct bp_location
      processor's architectual constraints.  */
   CORE_ADDR requested_address;
 
      processor's architectual constraints.  */
   CORE_ADDR requested_address;
 

+  /* An additional address assigned with this location.  This is currently
+     only used by STT_GNU_IFUNC resolver breakpoints to hold the address
+     of the resolver function.  */
+  CORE_ADDR related_address;
+
+  /* If the location comes from a probe point, this is the probe associated
+     with it.  */
+  struct bound_probe probe;
+

   char *function_name;
 
   /* Details of the placed breakpoint, when inserted.  */
   char *function_name;
 
   /* Details of the placed breakpoint, when inserted.  */


@@ -349,42 +457,172 @@ struct bp_location
      This variable keeps a number of events still to go, when
      it becomes 0 this location is retired.  */
   int events_till_retirement;
      This variable keeps a number of events still to go, when
      it becomes 0 this location is retired.  */
   int events_till_retirement;

+
+  /* Line number which was used to place this location.
+
+     Breakpoint placed into a comment keeps it's user specified line number
+     despite ADDRESS resolves into a different line number.  */
+
+  int line_number;
+
+  /* Symtab which was used to place this location.  This is used
+     to find the corresponding source file name.  */
+
+  struct symtab *symtab;
+};
+
+/* The possible return values for print_bpstat, print_it_normal,
+   print_it_done, print_it_noop.  */
+enum print_stop_action
+{
+  /* We printed nothing or we need to do some more analysis.  */
+  PRINT_UNKNOWN = -1,
+
+  /* We printed something, and we *do* desire that something to be
+     followed by a location.  */
+  PRINT_SRC_AND_LOC,
+
+  /* We printed something, and we do *not* desire that something to be
+     followed by a location.  */
+  PRINT_SRC_ONLY,
+
+  /* We already printed all we needed to print, don't print anything
+     else.  */
+  PRINT_NOTHING

 };
 
 /* This structure is a collection of function pointers that, if available,
    will be called instead of the performing the default action for this
    bptype.  */
 
 };
 
 /* This structure is a collection of function pointers that, if available,
    will be called instead of the performing the default action for this
    bptype.  */
 

-struct breakpoint_ops 
+struct breakpoint_ops

 {
 {

-  /* Insert the breakpoint or activate the catchpoint.  Should raise
-     an exception if the operation failed.  */
-  void (*insert) (struct breakpoint *);
+  /* Destructor.  Releases everything from SELF (but not SELF
+     itself).  */
+  void (*dtor) (struct breakpoint *self);

 
 

-  /* Remove the breakpoint/catchpoint that was previously inserted
-     with the "insert" method above.  Return non-zero if the operation
-     succeeded.  */
-  int (*remove) (struct breakpoint *);
+  /* Allocate a location for this breakpoint.  */
+  struct bp_location * (*allocate_location) (struct breakpoint *);

 
 

-  /* Return non-zero if the debugger should tell the user that this
-     breakpoint was hit.  */
-  int (*breakpoint_hit) (struct breakpoint *);
+  /* Reevaluate a breakpoint.  This is necessary after symbols change
+     (e.g., an executable or DSO was loaded, or the inferior just
+     started).  */
+  void (*re_set) (struct breakpoint *self);
+
+  /* Insert the breakpoint or watchpoint or activate the catchpoint.
+     Return 0 for success, 1 if the breakpoint, watchpoint or
+     catchpoint type is not supported, -1 for failure.  */
+  int (*insert_location) (struct bp_location *);
+
+  /* Remove the breakpoint/catchpoint that was previously inserted
+     with the "insert" method above.  Return 0 for success, 1 if the
+     breakpoint, watchpoint or catchpoint type is not supported,
+     -1 for failure.  */
+  int (*remove_location) (struct bp_location *);
+
+  /* Return true if it the target has stopped due to hitting
+     breakpoint location BL.  This function does not check if we
+     should stop, only if BL explains the stop.  ASPACE is the address
+     space in which the event occurred, BP_ADDR is the address at
+     which the inferior stopped, and WS is the target_waitstatus
+     describing the event.  */
+  int (*breakpoint_hit) (const struct bp_location *bl,
+                        struct address_space *aspace,
+                        CORE_ADDR bp_addr,
+                        const struct target_waitstatus *ws);
+
+  /* Check internal conditions of the breakpoint referred to by BS.
+     If we should not stop for this breakpoint, set BS->stop to 0.  */
+  void (*check_status) (struct bpstats *bs);
+
+  /* Tell how many hardware resources (debug registers) are needed
+     for this breakpoint.  If this function is not provided, then
+     the breakpoint or watchpoint needs one debug register.  */
+  int (*resources_needed) (const struct bp_location *);
+
+  /* Tell whether we can downgrade from a hardware watchpoint to a software
+     one.  If not, the user will not be able to enable the watchpoint when
+     there are not enough hardware resources available.  */
+  int (*works_in_software_mode) (const struct breakpoint *);

 
   /* The normal print routine for this breakpoint, called when we
      hit it.  */
 
   /* The normal print routine for this breakpoint, called when we
      hit it.  */

-  enum print_stop_action (*print_it) (struct breakpoint *);
+  enum print_stop_action (*print_it) (struct bpstats *bs);

 
 

-  /* Display information about this breakpoint, for "info breakpoints".  */
+  /* Display information about this breakpoint, for "info
+     breakpoints".  */

   void (*print_one) (struct breakpoint *, struct bp_location **);
 
   void (*print_one) (struct breakpoint *, struct bp_location **);
 

-  /* Display information about this breakpoint after setting it (roughly
-     speaking; this is called from "mention").  */
+  /* Display extra information about this breakpoint, below the normal
+     breakpoint description in "info breakpoints".
+
+     In the example below, the "address range" line was printed
+     by print_one_detail_ranged_breakpoint.
+
+     (gdb) info breakpoints
+     Num     Type           Disp Enb Address    What
+     2       hw breakpoint  keep y              in main at test-watch.c:70
+            address range: [0x10000458, 0x100004c7]
+
+   */
+  void (*print_one_detail) (const struct breakpoint *, struct ui_out *);
+
+  /* Display information about this breakpoint after setting it
+     (roughly speaking; this is called from "mention").  */

   void (*print_mention) (struct breakpoint *);
 
   /* Print to FP the CLI command that recreates this breakpoint.  */
   void (*print_recreate) (struct breakpoint *, struct ui_file *fp);
   void (*print_mention) (struct breakpoint *);
 
   /* Print to FP the CLI command that recreates this breakpoint.  */
   void (*print_recreate) (struct breakpoint *, struct ui_file *fp);

+
+  /* Create SALs from address string, storing the result in linespec_result.
+
+     For an explanation about the arguments, see the function
+     `create_sals_from_address_default'.
+
+     This function is called inside `create_breakpoint'.  */
+  void (*create_sals_from_address) (char **, struct linespec_result *,
+                                   enum bptype, char *, char **);
+
+  /* This method will be responsible for creating a breakpoint given its SALs.
+     Usually, it just calls `create_breakpoints_sal' (for ordinary
+     breakpoints).  However, there may be some special cases where we might
+     need to do some tweaks, e.g., see
+     `strace_marker_create_breakpoints_sal'.
+
+     This function is called inside `create_breakpoint'.  */
+  void (*create_breakpoints_sal) (struct gdbarch *,
+                                 struct linespec_result *,
+                                 char *, char *,
+                                 enum bptype, enum bpdisp, int, int,
+                                 int, const struct breakpoint_ops *,
+                                 int, int, int, unsigned);
+
+  /* Given the address string (second parameter), this method decodes it
+     and provides the SAL locations related to it.  For ordinary breakpoints,
+     it calls `decode_line_full'.
+
+     This function is called inside `addr_string_to_sals'.  */
+  void (*decode_linespec) (struct breakpoint *, char **,
+                          struct symtabs_and_lines *);
+
+  /* Return true if this breakpoint explains a signal.  See
+     bpstat_explains_signal.  */
+  int (*explains_signal) (struct breakpoint *, enum gdb_signal);
+
+  /* Called after evaluating the breakpoint's condition,
+     and only if it evaluated true.  */
+  void (*after_condition_true) (struct bpstats *bs);

 };
 
 };
 

+/* Helper for breakpoint_ops->print_recreate implementations.  Prints
+   the "thread" or "task" condition of B, and then a newline.
+
+   Necessary because most breakpoint implementations accept
+   thread/task conditions at the end of the spec line, like "break foo
+   thread 1", which needs outputting before any breakpoint-type
+   specific extra command necessary for B's recreation.  */
+extern void print_recreate_thread (struct breakpoint *b, struct ui_file *fp);
+

 enum watchpoint_triggered
 {
   /* This watchpoint definitely did not trigger.  */
 enum watchpoint_triggered
 {
   /* This watchpoint definitely did not trigger.  */


@@ -398,9 +636,6 @@ enum watchpoint_triggered
   watch_triggered_yes  
 };
 
   watch_triggered_yes  
 };
 

-/* This is used to declare the VEC syscalls_to_be_caught.  */
-DEF_VEC_I(int);
-

 typedef struct bp_location *bp_location_p;
 DEF_VEC_P(bp_location_p);
 
 typedef struct bp_location *bp_location_p;
 DEF_VEC_P(bp_location_p);
 


@@ -409,22 +644,32 @@ DEF_VEC_P(bp_location_p);
    detail to the breakpoints module.  */
 struct counted_command_line;
 
    detail to the breakpoints module.  */
 struct counted_command_line;
 

+/* Some targets (e.g., embedded PowerPC) need two debug registers to set
+   a watchpoint over a memory region.  If this flag is true, GDB will use
+   only one register per watchpoint, thus assuming that all acesses that
+   modify a memory location happen at its starting address. */
+
+extern int target_exact_watchpoints;
+

 /* Note that the ->silent field is not currently used by any commands
    (though the code is in there if it was to be, and set_raw_breakpoint
    does set it to 0).  I implemented it because I thought it would be
    useful for a hack I had to put in; I'm going to leave it in because
    I can see how there might be times when it would indeed be useful */
 
 /* Note that the ->silent field is not currently used by any commands
    (though the code is in there if it was to be, and set_raw_breakpoint
    does set it to 0).  I implemented it because I thought it would be
    useful for a hack I had to put in; I'm going to leave it in because
    I can see how there might be times when it would indeed be useful */
 

-/* This is for a breakpoint or a watchpoint.  */
+/* This is for all kinds of breakpoints.  */

 
 struct breakpoint
   {
 
 struct breakpoint
   {

+    /* Methods associated with this breakpoint.  */
+    const struct breakpoint_ops *ops;
+

     struct breakpoint *next;
     struct breakpoint *next;

-    /* Type of breakpoint. */
+    /* Type of breakpoint.  */

     enum bptype type;
     /* Zero means disabled; remember the info but don't break here.  */
     enum enable_state enable_state;
     enum bptype type;
     /* Zero means disabled; remember the info but don't break here.  */
     enum enable_state enable_state;

-    /* What to do with this breakpoint after we hit it. */
+    /* What to do with this breakpoint after we hit it.  */

     enum bpdisp disposition;
     /* Number assigned to distinguish breakpoints.  */
     int number;
     enum bpdisp disposition;
     /* Number assigned to distinguish breakpoints.  */
     int number;


@@ -432,88 +677,70 @@ struct breakpoint
     /* Location(s) associated with this high-level breakpoint.  */
     struct bp_location *loc;
 
     /* Location(s) associated with this high-level breakpoint.  */
     struct bp_location *loc;
 

-    /* Line number of this address.  */
-
-    int line_number;
-
-    /* Source file name of this address.  */
-
-    char *source_file;
-

     /* Non-zero means a silent breakpoint (don't print frame info
     /* Non-zero means a silent breakpoint (don't print frame info

-       if we stop here). */
+       if we stop here).  */

     unsigned char silent;
     unsigned char silent;

+    /* Non-zero means display ADDR_STRING to the user verbatim.  */
+    unsigned char display_canonical;

     /* Number of stops at this breakpoint that should
        be continued automatically before really stopping.  */
     int ignore_count;
     /* Number of stops at this breakpoint that should
        be continued automatically before really stopping.  */
     int ignore_count;

-    /* Chain of command lines to execute when this breakpoint is hit.  */
+
+    /* Number of stops at this breakpoint before it will be
+       disabled.  */
+    int enable_count;
+
+    /* Chain of command lines to execute when this breakpoint is
+       hit.  */

     struct counted_command_line *commands;
     /* Stack depth (address of frame).  If nonzero, break only if fp
        equals this.  */
     struct frame_id frame_id;
 
     struct counted_command_line *commands;
     /* Stack depth (address of frame).  If nonzero, break only if fp
        equals this.  */
     struct frame_id frame_id;
 

-    /* The program space used to set the breakpoint.  */
+    /* The program space used to set the breakpoint.  This is only set
+       for breakpoints which are specific to a program space; for
+       non-thread-specific ordinary breakpoints this is NULL.  */

     struct program_space *pspace;
 
     /* String we used to set the breakpoint (malloc'd).  */
     char *addr_string;
     struct program_space *pspace;
 
     /* String we used to set the breakpoint (malloc'd).  */
     char *addr_string;

+
+    /* The filter that should be passed to decode_line_full when
+       re-setting this breakpoint.  This may be NULL, but otherwise is
+       allocated with xmalloc.  */
+    char *filter;
+
+    /* For a ranged breakpoint, the string we used to find
+       the end of the range (malloc'd).  */
+    char *addr_string_range_end;
+

     /* Architecture we used to set the breakpoint.  */
     struct gdbarch *gdbarch;
     /* Language we used to set the breakpoint.  */
     enum language language;
     /* Input radix we used to set the breakpoint.  */
     int input_radix;
     /* Architecture we used to set the breakpoint.  */
     struct gdbarch *gdbarch;
     /* Language we used to set the breakpoint.  */
     enum language language;
     /* Input radix we used to set the breakpoint.  */
     int input_radix;

-    /* String form of the breakpoint condition (malloc'd), or NULL if there
-       is no condition.  */
+    /* String form of the breakpoint condition (malloc'd), or NULL if
+       there is no condition.  */

     char *cond_string;
     char *cond_string;

-    /* String form of exp to use for displaying to the user (malloc'd), or
-       NULL if none.  */
-    char *exp_string;
-    /* String form to use for reparsing of EXP (malloc'd) or NULL.  */
-    char *exp_string_reparse;
-
-    /* The expression we are watching, or NULL if not a watchpoint.  */
-    struct expression *exp;
-    /* The largest block within which it is valid, or NULL if it is
-       valid anywhere (e.g. consists just of global symbols).  */
-    struct block *exp_valid_block;
-    /* The conditional expression if any.  NULL if not a watchpoint.  */
-    struct expression *cond_exp;
-    /* The largest block within which it is valid, or NULL if it is
-       valid anywhere (e.g. consists just of global symbols).  */
-    struct block *cond_exp_valid_block;
-    /* Value of the watchpoint the last time we checked it, or NULL
-       when we do not know the value yet or the value was not
-       readable.  VAL is never lazy.  */
-    struct value *val;
-    /* Nonzero if VAL is valid.  If VAL_VALID is set but VAL is NULL,
-       then an error occurred reading the value.  */
-    int val_valid;
+
+    /* String form of extra parameters, or NULL if there are none.
+     Malloc'd.  */
+    char *extra_string;

 
     /* Holds the address of the related watchpoint_scope breakpoint
 
     /* Holds the address of the related watchpoint_scope breakpoint

-       when using watchpoints on local variables (might the concept
-       of a related breakpoint be useful elsewhere, if not just call
-       it the watchpoint_scope breakpoint or something like that. FIXME).  */
+       when using watchpoints on local variables (might the concept of
+       a related breakpoint be useful elsewhere, if not just call it
+       the watchpoint_scope breakpoint or something like that.
+       FIXME).  */

     struct breakpoint *related_breakpoint;
 
     struct breakpoint *related_breakpoint;
 

-    /* Holds the frame address which identifies the frame this
-       watchpoint should be evaluated in, or `null' if the watchpoint
-       should be evaluated on the outermost frame.  */
-    struct frame_id watchpoint_frame;
-
-    /* Holds the thread which identifies the frame this watchpoint
-       should be considered in scope for, or `null_ptid' if the
-       watchpoint should be evaluated in all threads.  */
-    ptid_t watchpoint_thread;
-
-    /* For hardware watchpoints, the triggered status according to the
-       hardware.  */
-    enum watchpoint_triggered watchpoint_triggered;
-
-    /* Thread number for thread-specific breakpoint, or -1 if don't care.  */
+    /* Thread number for thread-specific breakpoint, 
+       or -1 if don't care.  */

     int thread;
 
     int thread;
 

-    /* Ada task number for task-specific breakpoint, or 0 if don't care.  */
+    /* Ada task number for task-specific breakpoint, 
+       or 0 if don't care.  */

     int task;
 
     /* Count of the number of times this breakpoint was taken, dumped
     int task;
 
     /* Count of the number of times this breakpoint was taken, dumped


@@ -522,59 +749,125 @@ struct breakpoint
        aborting, so you can back up to just before the abort.  */
     int hit_count;
 
        aborting, so you can back up to just before the abort.  */
     int hit_count;
 

-    /* Process id of a child process whose forking triggered this
-       catchpoint.  This field is only valid immediately after this
-       catchpoint has triggered.  */
-    ptid_t forked_inferior_pid;
-
-    /* Filename of a program whose exec triggered this catchpoint.
-       This field is only valid immediately after this catchpoint has
-       triggered.  */
-    char *exec_pathname;
-
-    /* Syscall numbers used for the 'catch syscall' feature.
-       If no syscall has been specified for filtering, its value is NULL.
-       Otherwise, it holds a list of all syscalls to be caught.
-       The list elements are allocated with xmalloc.  */
-    VEC(int) *syscalls_to_be_caught;
-
-    /* Methods associated with this breakpoint.  */
-    struct breakpoint_ops *ops;
-

     /* Is breakpoint's condition not yet parsed because we found
        no location initially so had no context to parse
        the condition in.  */
     int condition_not_parsed;
 
     /* Is breakpoint's condition not yet parsed because we found
        no location initially so had no context to parse
        the condition in.  */
     int condition_not_parsed;
 

-    /* Number of times this tracepoint should single-step 
-       and collect additional data.  */
-    long step_count;
+    /* With a Python scripting enabled GDB, store a reference to the
+       Python object that has been associated with this breakpoint.
+       This is always NULL for a GDB that is not script enabled.  It
+       can sometimes be NULL for enabled GDBs as not all breakpoint
+       types are tracked by the scripting language API.  */
+    struct gdbpy_breakpoint_object *py_bp_object;
+
+    /* Same as py_bp_object, but for Scheme.  */
+    struct gdbscm_breakpoint_object *scm_bp_object;
+  };

 
 

-    /* Number of times this tracepoint should be hit before 
-       disabling/ending.  */
-    int pass_count;
+/* An instance of this type is used to represent a watchpoint.  It
+   includes a "struct breakpoint" as a kind of base class; users
+   downcast to "struct breakpoint *" when needed.  */

 
 

-    /* The number of the tracepoint on the target.  */
-    int number_on_target;
+struct watchpoint
+{
+  /* The base class.  */
+  struct breakpoint base;
+
+  /* String form of exp to use for displaying to the user (malloc'd),
+     or NULL if none.  */
+  char *exp_string;
+  /* String form to use for reparsing of EXP (malloc'd) or NULL.  */
+  char *exp_string_reparse;
+
+  /* The expression we are watching, or NULL if not a watchpoint.  */
+  struct expression *exp;
+  /* The largest block within which it is valid, or NULL if it is
+     valid anywhere (e.g. consists just of global symbols).  */
+  const struct block *exp_valid_block;
+  /* The conditional expression if any.  */
+  struct expression *cond_exp;
+  /* The largest block within which it is valid, or NULL if it is
+     valid anywhere (e.g. consists just of global symbols).  */
+  const struct block *cond_exp_valid_block;
+  /* Value of the watchpoint the last time we checked it, or NULL when
+     we do not know the value yet or the value was not readable.  VAL
+     is never lazy.  */
+  struct value *val;
+  /* Nonzero if VAL is valid.  If VAL_VALID is set but VAL is NULL,
+     then an error occurred reading the value.  */
+  int val_valid;
+
+  /* When watching the location of a bitfield, contains the offset and size of
+     the bitfield.  Otherwise contains 0.  */
+  int val_bitpos;
+  int val_bitsize;
+
+  /* Holds the frame address which identifies the frame this
+     watchpoint should be evaluated in, or `null' if the watchpoint
+     should be evaluated on the outermost frame.  */
+  struct frame_id watchpoint_frame;
+
+  /* Holds the thread which identifies the frame this watchpoint
+     should be considered in scope for, or `null_ptid' if the
+     watchpoint should be evaluated in all threads.  */
+  ptid_t watchpoint_thread;
+
+  /* For hardware watchpoints, the triggered status according to the
+     hardware.  */
+  enum watchpoint_triggered watchpoint_triggered;
+
+  /* Whether this watchpoint is exact (see
+     target_exact_watchpoints).  */
+  int exact;
+
+  /* The mask address for a masked hardware watchpoint.  */
+  CORE_ADDR hw_wp_mask;
+};

 
 

-    /* The static tracepoint marker id, if known.  */
-    char *static_trace_marker_id;
+/* Return true if BPT is either a software breakpoint or a hardware
+   breakpoint.  */

 
 

-    /* LTTng/UST allow more than one marker with the same ID string,
-       although it unadvised because it confuses tools.  When setting
-       static tracepoints by marker ID, this will record the index in
-       the array of markers we found for the given marker ID for which
-       this static tracepoint corresponds.  When resetting
-       breakpoints, we will use this index to try to find the same
-       marker again.  */
-    int static_trace_marker_id_idx;
+extern int is_breakpoint (const struct breakpoint *bpt);

 
 

-    /* With a Python scripting enabled GDB, store a reference to the
-       Python object that has been associated with this breakpoint.
-       This is always NULL for a GDB that is not script enabled.  It
-       can sometimes be NULL for enabled GDBs as not all breakpoint
-       types are tracked by the Python scripting API.  */
-    struct breakpoint_object *py_bp_object;
+/* Returns true if BPT is really a watchpoint.  */
+
+extern int is_watchpoint (const struct breakpoint *bpt);
+
+/* An instance of this type is used to represent all kinds of
+   tracepoints.  It includes a "struct breakpoint" as a kind of base
+   class; users downcast to "struct breakpoint *" when needed.  */
+
+struct tracepoint
+{
+  /* The base class.  */
+  struct breakpoint base;
+
+  /* Number of times this tracepoint should single-step and collect
+     additional data.  */
+  long step_count;
+
+  /* Number of times this tracepoint should be hit before
+     disabling/ending.  */
+  int pass_count;
+
+  /* The number of the tracepoint on the target.  */
+  int number_on_target;
+
+  /* The total space taken by all the trace frames for this
+     tracepoint.  */
+  ULONGEST traceframe_usage;
+
+  /* The static tracepoint marker id, if known.  */
+  char *static_trace_marker_id;
+
+  /* LTTng/UST allow more than one marker with the same ID string,
+     although it unadvised because it confuses tools.  When setting
+     static tracepoints by marker ID, this will record the index in
+     the array of markers we found for the given marker ID for which
+     this static tracepoint corresponds.  When resetting breakpoints,
+     we will use this index to try to find the same marker again.  */
+  int static_trace_marker_id_idx;

 };
 
 typedef struct breakpoint *breakpoint_p;
 };
 
 typedef struct breakpoint *breakpoint_p;


@@ -595,7 +888,8 @@ extern void bpstat_clear (bpstat *);
 extern bpstat bpstat_copy (bpstat);
 
 extern bpstat bpstat_stop_status (struct address_space *aspace,
 extern bpstat bpstat_copy (bpstat);
 
 extern bpstat bpstat_stop_status (struct address_space *aspace,

-                                 CORE_ADDR pc, ptid_t ptid);
+                                 CORE_ADDR pc, ptid_t ptid,
+                                 const struct target_waitstatus *ws);

 \f
 /* This bpstat_what stuff tells wait_for_inferior what to do with a
    breakpoint (a challenging task).
 \f
 /* This bpstat_what stuff tells wait_for_inferior what to do with a
    breakpoint (a challenging task).


@@ -621,26 +915,30 @@ enum bpstat_what_main_action
     BPSTAT_WHAT_KEEP_CHECKING,
 
     /* Remove breakpoints, single step once, then put them back in and
     BPSTAT_WHAT_KEEP_CHECKING,
 
     /* Remove breakpoints, single step once, then put them back in and

-       go back to what we were doing.  It's possible that this should be
-       removed from the main_action and put into a separate field, to more
-       cleanly handle BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE.  */
+       go back to what we were doing.  It's possible that this should
+       be removed from the main_action and put into a separate field,
+       to more cleanly handle
+       BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE.  */

     BPSTAT_WHAT_SINGLE,
 
     /* Set longjmp_resume breakpoint, remove all other breakpoints,
     BPSTAT_WHAT_SINGLE,
 
     /* Set longjmp_resume breakpoint, remove all other breakpoints,

-       and continue.  The "remove all other breakpoints" part is required
-       if we are also stepping over another breakpoint as well as doing
-       the longjmp handling.  */
+       and continue.  The "remove all other breakpoints" part is
+       required if we are also stepping over another breakpoint as
+       well as doing the longjmp handling.  */

     BPSTAT_WHAT_SET_LONGJMP_RESUME,
 
     /* Clear longjmp_resume breakpoint, then handle as
        BPSTAT_WHAT_KEEP_CHECKING.  */
     BPSTAT_WHAT_CLEAR_LONGJMP_RESUME,
 
     BPSTAT_WHAT_SET_LONGJMP_RESUME,
 
     /* Clear longjmp_resume breakpoint, then handle as
        BPSTAT_WHAT_KEEP_CHECKING.  */
     BPSTAT_WHAT_CLEAR_LONGJMP_RESUME,
 

+    /* Clear step resume breakpoint, and keep checking.  */
+    BPSTAT_WHAT_STEP_RESUME,
+

     /* Rather than distinguish between noisy and silent stops here, it
        might be cleaner to have bpstat_print make that decision (also
        taking into account stop_print_frame and source_only).  But the
     /* Rather than distinguish between noisy and silent stops here, it
        might be cleaner to have bpstat_print make that decision (also
        taking into account stop_print_frame and source_only).  But the

-       implications are a bit scary (interaction with auto-displays, etc.),
-       so I won't try it.  */
+       implications are a bit scary (interaction with auto-displays,
+       etc.), so I won't try it.  */

 
     /* Stop silently.  */
     BPSTAT_WHAT_STOP_SILENT,
 
     /* Stop silently.  */
     BPSTAT_WHAT_STOP_SILENT,


@@ -648,8 +946,14 @@ enum bpstat_what_main_action
     /* Stop and print.  */
     BPSTAT_WHAT_STOP_NOISY,
 
     /* Stop and print.  */
     BPSTAT_WHAT_STOP_NOISY,
 

-    /* Clear step resume breakpoint, and keep checking.  */
-    BPSTAT_WHAT_STEP_RESUME,
+    /* Clear step resume breakpoint, and keep checking.  High-priority
+       step-resume breakpoints are used when even if there's a user
+       breakpoint at the current PC when we set the step-resume
+       breakpoint, we don't want to re-handle any breakpoint other
+       than the step-resume when it's hit; instead we want to move
+       past the breakpoint.  This is used in the case of skipping
+       signal handlers.  */
+    BPSTAT_WHAT_HP_STEP_RESUME,

   };
 
 /* An enum indicating the kind of "stack dummy" stop.  This is a bit
   };
 
 /* An enum indicating the kind of "stack dummy" stop.  This is a bit


@@ -670,10 +974,10 @@ struct bpstat_what
   {
     enum bpstat_what_main_action main_action;
 
   {
     enum bpstat_what_main_action main_action;
 

-    /* Did we hit a call dummy breakpoint?  This only goes with a main_action
-       of BPSTAT_WHAT_STOP_SILENT or BPSTAT_WHAT_STOP_NOISY (the concept of
-       continuing from a call dummy without popping the frame is not a
-       useful one).  */
+    /* Did we hit a call dummy breakpoint?  This only goes with a
+       main_action of BPSTAT_WHAT_STOP_SILENT or
+       BPSTAT_WHAT_STOP_NOISY (the concept of continuing from a call
+       dummy without popping the frame is not a useful one).  */

     enum stop_stack_kind call_dummy;
 
     /* Used for BPSTAT_WHAT_SET_LONGJMP_RESUME and
     enum stop_stack_kind call_dummy;
 
     /* Used for BPSTAT_WHAT_SET_LONGJMP_RESUME and


@@ -682,27 +986,16 @@ struct bpstat_what
     int is_longjmp;
   };
 
     int is_longjmp;
   };
 

-/* The possible return values for print_bpstat, print_it_normal,
-   print_it_done, print_it_noop. */
-enum print_stop_action
-  {
-    PRINT_UNKNOWN = -1,
-    PRINT_SRC_AND_LOC,
-    PRINT_SRC_ONLY,
-    PRINT_NOTHING
-  };
-

 /* Tell what to do about this bpstat.  */
 struct bpstat_what bpstat_what (bpstat);
 \f
 /* Tell what to do about this bpstat.  */
 struct bpstat_what bpstat_what (bpstat);
 \f

-/* Find the bpstat associated with a breakpoint.  NULL otherwise. */
+/* Find the bpstat associated with a breakpoint.  NULL otherwise.  */

 bpstat bpstat_find_breakpoint (bpstat, struct breakpoint *);
 
 bpstat bpstat_find_breakpoint (bpstat, struct breakpoint *);
 

-/* Nonzero if a signal that we got in wait() was due to circumstances
-   explained by the BS.  */
-/* Currently that is true if we have hit a breakpoint, or if there is
-   a watchpoint enabled.  */
-#define bpstat_explains_signal(bs) ((bs) != NULL)
+/* Nonzero if a signal that we got in target_wait() was due to
+   circumstances explained by the bpstat; the signal is therefore not
+   random.  */
+extern int bpstat_explains_signal (bpstat, enum gdb_signal);

 
 /* Nonzero is this bpstat causes a stop.  */
 extern int bpstat_causes_stop (bpstat);
 
 /* Nonzero is this bpstat causes a stop.  */
 extern int bpstat_causes_stop (bpstat);


@@ -715,12 +1008,13 @@ extern int bpstat_should_step (void);
 /* Print a message indicating what happened.  Returns nonzero to
    say that only the source line should be printed after this (zero
    return means print the frame as well as the source line).  */
 /* Print a message indicating what happened.  Returns nonzero to
    say that only the source line should be printed after this (zero
    return means print the frame as well as the source line).  */

-extern enum print_stop_action bpstat_print (bpstat);
+extern enum print_stop_action bpstat_print (bpstat, int);
+
+/* Put in *NUM the breakpoint number of the first breakpoint we are
+   stopped at.  *BSP upon return is a bpstat which points to the
+   remaining breakpoints stopped at (but which is not guaranteed to be
+   good for anything but further calls to bpstat_num).

 
 

-/* Put in *NUM the breakpoint number of the first breakpoint we are stopped
-   at.  *BSP upon return is a bpstat which points to the remaining
-   breakpoints stopped at (but which is not guaranteed to be good for
-   anything but further calls to bpstat_num).

    Return 0 if passed a bpstat which does not indicate any breakpoints.
    Return -1 if stopped at a breakpoint that has been deleted since
    we set it.
    Return 0 if passed a bpstat which does not indicate any breakpoints.
    Return -1 if stopped at a breakpoint that has been deleted since
    we set it.


@@ -733,20 +1027,23 @@ extern int bpstat_num (bpstat *, int *);
    command loop).  */
 extern void bpstat_do_actions (void);
 
    command loop).  */
 extern void bpstat_do_actions (void);
 

-/* Modify BS so that the actions will not be performed.  */
-extern void bpstat_clear_actions (bpstat);
+/* Modify all entries of STOP_BPSTAT of INFERIOR_PTID so that the actions will
+   not be performed.  */
+extern void bpstat_clear_actions (void);

 
 /* Implementation:  */
 
 
 /* Implementation:  */
 

-/* Values used to tell the printing routine how to behave for this bpstat. */
+/* Values used to tell the printing routine how to behave for this
+   bpstat.  */

 enum bp_print_how
   {
     /* This is used when we want to do a normal printing of the reason
 enum bp_print_how
   {
     /* This is used when we want to do a normal printing of the reason

-       for stopping. The output will depend on the type of eventpoint
-       we are dealing with. This is the default value, most commonly
-       used. */
+       for stopping.  The output will depend on the type of eventpoint
+       we are dealing with.  This is the default value, most commonly
+       used.  */

     print_it_normal,
     print_it_normal,

-    /* This is used when nothing should be printed for this bpstat entry.  */
+    /* This is used when nothing should be printed for this bpstat
+       entry.  */

     print_it_noop,
     /* This is used when everything which needs to be printed has
        already been printed.  But we still want to print the frame.  */
     print_it_noop,
     /* This is used when everything which needs to be printed has
        already been printed.  But we still want to print the frame.  */


@@ -786,10 +1083,6 @@ struct bpstats
     /* The associated command list.  */
     struct counted_command_line *commands;
 
     /* The associated command list.  */
     struct counted_command_line *commands;
 

-    /* Commands left to be done.  This points somewhere in
-       base_command.  */
-    struct command_line *commands_left;
-

     /* Old value associated with a watchpoint.  */
     struct value *old_val;
 
     /* Old value associated with a watchpoint.  */
     struct value *old_val;
 


@@ -824,15 +1117,37 @@ enum breakpoint_here
 
 /* Prototypes for breakpoint-related functions.  */
 
 
 /* Prototypes for breakpoint-related functions.  */
 

-extern enum breakpoint_here breakpoint_here_p (struct address_space *, CORE_ADDR);
+/* Return 1 if there's a program/permanent breakpoint planted in
+   memory at ADDRESS, return 0 otherwise.  */
+
+extern int program_breakpoint_here_p (struct gdbarch *gdbarch, CORE_ADDR address);
+
+extern enum breakpoint_here breakpoint_here_p (struct address_space *, 
+                                              CORE_ADDR);

 
 extern int moribund_breakpoint_here_p (struct address_space *, CORE_ADDR);
 
 extern int breakpoint_inserted_here_p (struct address_space *, CORE_ADDR);
 
 
 extern int moribund_breakpoint_here_p (struct address_space *, CORE_ADDR);
 
 extern int breakpoint_inserted_here_p (struct address_space *, CORE_ADDR);
 

-extern int regular_breakpoint_inserted_here_p (struct address_space *, CORE_ADDR);
+extern int regular_breakpoint_inserted_here_p (struct address_space *, 
+                                              CORE_ADDR);
+
+extern int software_breakpoint_inserted_here_p (struct address_space *, 
+                                               CORE_ADDR);

 
 

-extern int software_breakpoint_inserted_here_p (struct address_space *, CORE_ADDR);
+/* Return non-zero iff there is a hardware breakpoint inserted at
+   PC.  */
+extern int hardware_breakpoint_inserted_here_p (struct address_space *,
+                                               CORE_ADDR);
+
+/* Check whether any location of BP is inserted at PC.  */
+
+extern int breakpoint_has_location_inserted_here (struct breakpoint *bp,
+                                                 struct address_space *aspace,
+                                                 CORE_ADDR pc);
+
+extern int single_step_breakpoint_inserted_here_p (struct address_space *,
+                                                  CORE_ADDR);

 
 /* Returns true if there's a hardware watchpoint or access watchpoint
    inserted in the range defined by ADDR and LEN.  */
 
 /* Returns true if there's a hardware watchpoint or access watchpoint
    inserted in the range defined by ADDR and LEN.  */


@@ -840,10 +1155,28 @@ extern int hardware_watchpoint_inserted_in_range (struct address_space *,
                                                  CORE_ADDR addr,
                                                  ULONGEST len);
 
                                                  CORE_ADDR addr,
                                                  ULONGEST len);
 

-extern int breakpoint_thread_match (struct address_space *, CORE_ADDR, ptid_t);
+/* Returns true if {ASPACE1,ADDR1} and {ASPACE2,ADDR2} represent the
+   same breakpoint location.  In most targets, this can only be true
+   if ASPACE1 matches ASPACE2.  On targets that have global
+   breakpoints, the address space doesn't really matter.  */
+
+extern int breakpoint_address_match (struct address_space *aspace1,
+                                    CORE_ADDR addr1,
+                                    struct address_space *aspace2,
+                                    CORE_ADDR addr2);

 
 extern void until_break_command (char *, int, int);
 
 
 extern void until_break_command (char *, int, int);
 

+/* Initialize a struct bp_location.  */
+
+extern void init_bp_location (struct bp_location *loc,
+                             const struct bp_location_ops *ops,
+                             struct breakpoint *owner);
+
+extern void update_breakpoint_locations (struct breakpoint *b,
+                                        struct symtabs_and_lines sals,
+                                        struct symtabs_and_lines sals_end);
+

 extern void breakpoint_re_set (void);
 
 extern void breakpoint_re_set_thread (struct breakpoint *);
 extern void breakpoint_re_set (void);
 
 extern void breakpoint_re_set_thread (struct breakpoint *);


@@ -858,9 +1191,6 @@ extern struct breakpoint *clone_momentary_breakpoint (struct breakpoint *bpkt);
 
 extern void set_ignore_count (int, int, int);
 
 
 extern void set_ignore_count (int, int, int);
 

-extern void set_default_breakpoint (int, struct program_space *,
-                                   CORE_ADDR, struct symtab *, int);
-

 extern void breakpoint_init_inferior (enum inf_context);
 
 extern struct cleanup *make_cleanup_delete_breakpoint (struct breakpoint *);
 extern void breakpoint_init_inferior (enum inf_context);
 
 extern struct cleanup *make_cleanup_delete_breakpoint (struct breakpoint *);


@@ -869,10 +1199,18 @@ extern void delete_breakpoint (struct breakpoint *);
 
 extern void breakpoint_auto_delete (bpstat);
 
 
 extern void breakpoint_auto_delete (bpstat);
 

+typedef void (*walk_bp_location_callback) (struct bp_location *, void *);
+
+extern void iterate_over_bp_locations (walk_bp_location_callback);
+

 /* Return the chain of command lines to execute when this breakpoint
    is hit.  */
 extern struct command_line *breakpoint_commands (struct breakpoint *b);
 
 /* Return the chain of command lines to execute when this breakpoint
    is hit.  */
 extern struct command_line *breakpoint_commands (struct breakpoint *b);
 

+/* Return a string image of DISP.  The string is static, and thus should
+   NOT be deallocated after use.  */
+const char *bpdisp_text (enum bpdisp disp);
+

 extern void break_command (char *, int);
 
 extern void hbreak_command_wrapper (char *, int);
 extern void break_command (char *, int);
 
 extern void hbreak_command_wrapper (char *, int);


@@ -883,16 +1221,75 @@ extern void awatch_command_wrapper (char *, int, int);
 extern void rwatch_command_wrapper (char *, int, int);
 extern void tbreak_command (char *, int);
 
 extern void rwatch_command_wrapper (char *, int, int);
 extern void tbreak_command (char *, int);
 

+extern struct breakpoint_ops base_breakpoint_ops;
+extern struct breakpoint_ops bkpt_breakpoint_ops;
+extern struct breakpoint_ops tracepoint_breakpoint_ops;
+extern struct breakpoint_ops dprintf_breakpoint_ops;
+
+extern void initialize_breakpoint_ops (void);
+
+/* Arguments to pass as context to some catch command handlers.  */
+#define CATCH_PERMANENT ((void *) (uintptr_t) 0)
+#define CATCH_TEMPORARY ((void *) (uintptr_t) 1)
+
+/* Like add_cmd, but add the command to both the "catch" and "tcatch"
+   lists, and pass some additional user data to the command
+   function.  */
+
+extern void
+  add_catch_command (char *name, char *docstring,
+                    cmd_sfunc_ftype *sfunc,
+                    completer_ftype *completer,
+                    void *user_data_catch,
+                    void *user_data_tcatch);
+
+/* Initialize a breakpoint struct for Ada exception catchpoints.  */
+
+extern void
+  init_ada_exception_breakpoint (struct breakpoint *b,
+                                struct gdbarch *gdbarch,
+                                struct symtab_and_line sal,
+                                char *addr_string,
+                                const struct breakpoint_ops *ops,
+                                int tempflag,
+                                int enabled,
+                                int from_tty);
+
+extern void init_catchpoint (struct breakpoint *b,
+                            struct gdbarch *gdbarch, int tempflag,
+                            char *cond_string,
+                            const struct breakpoint_ops *ops);
+
+/* Add breakpoint B on the breakpoint list, and notify the user, the
+   target and breakpoint_created observers of its existence.  If
+   INTERNAL is non-zero, the breakpoint number will be allocated from
+   the internal breakpoint count.  If UPDATE_GLL is non-zero,
+   update_global_location_list will be called.  */
+
+extern void install_breakpoint (int internal, struct breakpoint *b,
+                               int update_gll);
+
+/* Flags that can be passed down to create_breakpoint, etc., to affect
+   breakpoint creation in several ways.  */
+
+enum breakpoint_create_flags
+  {
+    /* We're adding a breakpoint to our tables that is already
+       inserted in the target.  */
+    CREATE_BREAKPOINT_FLAGS_INSERTED = 1 << 0
+  };
+

 extern int create_breakpoint (struct gdbarch *gdbarch, char *arg,
                              char *cond_string, int thread,
 extern int create_breakpoint (struct gdbarch *gdbarch, char *arg,
                              char *cond_string, int thread,

-                             int parse_condition_and_thread,
+                             char *extra_string,
+                             int parse_arg,

                              int tempflag, enum bptype wanted_type,
                              int ignore_count,
                              enum auto_boolean pending_break_support,
                              int tempflag, enum bptype wanted_type,
                              int ignore_count,
                              enum auto_boolean pending_break_support,

-                             struct breakpoint_ops *ops,
+                             const struct breakpoint_ops *ops,

                              int from_tty,
                              int enabled,
                              int from_tty,
                              int enabled,

-                             int internal);
+                             int internal, unsigned flags);

 
 extern void insert_breakpoints (void);
 
 
 extern void insert_breakpoints (void);
 


@@ -902,9 +1299,9 @@ extern int remove_breakpoints_pid (int pid);
 
 /* This function can be used to physically insert eventpoints from the
    specified traced inferior process, without modifying the breakpoint
 
 /* This function can be used to physically insert eventpoints from the
    specified traced inferior process, without modifying the breakpoint

-   package's state.  This can be useful for those targets which support
-   following the processes of a fork() or vfork() system call, when both
-   of the resulting two processes are to be followed.  */
+   package's state.  This can be useful for those targets which
+   support following the processes of a fork() or vfork() system call,
+   when both of the resulting two processes are to be followed.  */

 extern int reattach_breakpoints (int);
 
 /* This function can be used to update the breakpoint package's state
 extern int reattach_breakpoints (int);
 
 /* This function can be used to update the breakpoint package's state


@@ -921,7 +1318,7 @@ extern int reattach_breakpoints (int);
    - A step-resume breakpoint, if any, is explicitly removed from the
    breakpoint list.
    - All eventpoints without a symbolic address are removed from the
    - A step-resume breakpoint, if any, is explicitly removed from the
    breakpoint list.
    - All eventpoints without a symbolic address are removed from the

-   breakpoint list. */
+   breakpoint list.  */

 extern void update_breakpoints_after_exec (void);
 
 /* This function can be used to physically remove hardware breakpoints
 extern void update_breakpoints_after_exec (void);
 
 /* This function can be used to physically remove hardware breakpoints


@@ -933,7 +1330,7 @@ extern void update_breakpoints_after_exec (void);
 
    It is an error to use this function on the process whose id is
    inferior_ptid.  */
 
    It is an error to use this function on the process whose id is
    inferior_ptid.  */

-extern int detach_breakpoints (int);
+extern int detach_breakpoints (ptid_t ptid);

 
 /* This function is called when program space PSPACE is about to be
    deleted.  It takes care of updating breakpoints to not reference
 
 /* This function is called when program space PSPACE is about to be
    deleted.  It takes care of updating breakpoints to not reference


@@ -944,6 +1341,12 @@ extern void set_longjmp_breakpoint (struct thread_info *tp,
                                    struct frame_id frame);
 extern void delete_longjmp_breakpoint (int thread);
 
                                    struct frame_id frame);
 extern void delete_longjmp_breakpoint (int thread);
 

+/* Mark all longjmp breakpoints from THREAD for later deletion.  */
+extern void delete_longjmp_breakpoint_at_next_stop (int thread);
+
+extern struct breakpoint *set_longjmp_breakpoint_for_call_dummy (void);
+extern void check_longjmp_breakpoint_for_call_dummy (struct thread_info *tp);
+

 extern void enable_overlay_breakpoints (void);
 extern void disable_overlay_breakpoints (void);
 
 extern void enable_overlay_breakpoints (void);
 extern void disable_overlay_breakpoints (void);
 


@@ -952,7 +1355,7 @@ extern void delete_std_terminate_breakpoint (void);
 
 /* These functions respectively disable or reenable all currently
    enabled watchpoints.  When disabled, the watchpoints are marked
 
 /* These functions respectively disable or reenable all currently
    enabled watchpoints.  When disabled, the watchpoints are marked

-   call_disabled.  When reenabled, they are marked enabled.
+   call_disabled.  When re-enabled, they are marked enabled.

 
    The intended client of these functions is call_function_by_hand.
 
 
    The intended client of these functions is call_function_by_hand.
 


@@ -966,7 +1369,7 @@ extern void delete_std_terminate_breakpoint (void);
    and that can cause execution control to become very confused.
 
    Note that if a user sets breakpoints in an interactively called
    and that can cause execution control to become very confused.
 
    Note that if a user sets breakpoints in an interactively called

-   function, the call_disabled watchpoints will have been reenabled
+   function, the call_disabled watchpoints will have been re-enabled

    when the first such breakpoint is reached.  However, on targets
    that are unable to unwind through the call dummy frame, watches
    of stack-based storage may then be deleted, because gdb will
    when the first such breakpoint is reached.  However, on targets
    that are unable to unwind through the call dummy frame, watches
    of stack-based storage may then be deleted, because gdb will


@@ -989,20 +1392,17 @@ extern void disable_breakpoints_before_startup (void);
 extern void enable_breakpoints_after_startup (void);
 
 /* For script interpreters that need to define breakpoint commands
 extern void enable_breakpoints_after_startup (void);
 
 /* For script interpreters that need to define breakpoint commands

-   after they've already read the commands into a struct command_line.  */
+   after they've already read the commands into a struct
+   command_line.  */

 extern enum command_control_type commands_from_control_command
   (char *arg, struct command_line *cmd);
 
 extern void clear_breakpoint_hit_counts (void);
 
 extern enum command_control_type commands_from_control_command
   (char *arg, struct command_line *cmd);
 
 extern void clear_breakpoint_hit_counts (void);
 

-extern int get_number (char **);
-
-extern int get_number_or_range (char **);
-

 extern struct breakpoint *get_breakpoint (int num);
 
 extern struct breakpoint *get_breakpoint (int num);
 

-/* The following are for displays, which aren't really breakpoints, but
-   here is as good a place as any for them.  */
+/* The following are for displays, which aren't really breakpoints,
+   but here is as good a place as any for them.  */

 
 extern void disable_current_display (void);
 
 
 extern void disable_current_display (void);
 


@@ -1019,6 +1419,12 @@ extern void enable_breakpoint (struct breakpoint *);
 extern void breakpoint_set_commands (struct breakpoint *b, 
                                     struct command_line *commands);
 
 extern void breakpoint_set_commands (struct breakpoint *b, 
                                     struct command_line *commands);
 

+extern void breakpoint_set_silent (struct breakpoint *b, int silent);
+
+extern void breakpoint_set_thread (struct breakpoint *b, int thread);
+
+extern void breakpoint_set_task (struct breakpoint *b, int task);
+

 /* Clear the "inserted" flag in all breakpoints.  */
 extern void mark_breakpoints_out (void);
 
 /* Clear the "inserted" flag in all breakpoints.  */
 extern void mark_breakpoints_out (void);
 


@@ -1030,51 +1436,74 @@ extern struct breakpoint *create_jit_event_breakpoint (struct gdbarch *,
 extern struct breakpoint *create_solib_event_breakpoint (struct gdbarch *,
                                                         CORE_ADDR);
 
 extern struct breakpoint *create_solib_event_breakpoint (struct gdbarch *,
                                                         CORE_ADDR);
 

+/* Create an solib event breakpoint at ADDRESS in the current program
+   space, and immediately try to insert it.  Returns a pointer to the
+   breakpoint on success.  Deletes the new breakpoint and returns NULL
+   if inserting the breakpoint fails.  */
+extern struct breakpoint *create_and_insert_solib_event_breakpoint
+  (struct gdbarch *gdbarch, CORE_ADDR address);
+

 extern struct breakpoint *create_thread_event_breakpoint (struct gdbarch *,
                                                          CORE_ADDR);
 
 extern struct breakpoint *create_thread_event_breakpoint (struct gdbarch *,
                                                          CORE_ADDR);
 

+extern void remove_jit_event_breakpoints (void);
+

 extern void remove_solib_event_breakpoints (void);
 
 extern void remove_solib_event_breakpoints (void);
 

+/* Mark solib event breakpoints of the current program space with
+   delete at next stop disposition.  */
+extern void remove_solib_event_breakpoints_at_next_stop (void);
+

 extern void remove_thread_event_breakpoints (void);
 
 extern void disable_breakpoints_in_shlibs (void);
 
 extern void remove_thread_event_breakpoints (void);
 
 extern void disable_breakpoints_in_shlibs (void);
 

-/* This function returns TRUE if ep is a catchpoint. */
-extern int ep_is_catchpoint (struct breakpoint *);
+/* This function returns TRUE if ep is a catchpoint.  */
+extern int is_catchpoint (struct breakpoint *);
+
+/* Shared helper function (MI and CLI) for creating and installing
+   a shared object event catchpoint.  */
+extern void add_solib_catchpoint (char *arg, int is_load, int is_temp,
+                                  int enabled);

 
 /* Enable breakpoints and delete when hit.  Called with ARG == NULL
 
 /* Enable breakpoints and delete when hit.  Called with ARG == NULL

-   deletes all breakpoints. */
+   deletes all breakpoints.  */

 extern void delete_command (char *arg, int from_tty);
 
 extern void delete_command (char *arg, int from_tty);
 

-/* Pull all H/W watchpoints from the target. Return non-zero if the
-   remove fails. */
-extern int remove_hw_watchpoints (void);
-
-/* Manage a software single step breakpoint (or two).  Insert may be called
-   twice before remove is called.  */
+/* Create and insert a new software single step breakpoint for the
+   current thread.  May be called multiple times; each time will add a
+   new location to the set of potential addresses the next instruction
+   is at.  */

 extern void insert_single_step_breakpoint (struct gdbarch *,
 extern void insert_single_step_breakpoint (struct gdbarch *,

-                                          struct address_space *, CORE_ADDR);
-extern int single_step_breakpoints_inserted (void);
-extern void remove_single_step_breakpoints (void);
-extern void cancel_single_step_breakpoints (void);
-
-/* Manage manual breakpoints, separate from the normal chain of
-   breakpoints.  These functions are used in murky target-specific
-   ways.  Please do not add more uses!  */
-extern void *deprecated_insert_raw_breakpoint (struct gdbarch *,
-                                              struct address_space *, CORE_ADDR);
-extern int deprecated_remove_raw_breakpoint (struct gdbarch *, void *);
-
+                                          struct address_space *, 
+                                          CORE_ADDR);

 /* Check if any hardware watchpoints have triggered, according to the
    target.  */
 int watchpoints_triggered (struct target_waitstatus *);
 
 /* Check if any hardware watchpoints have triggered, according to the
    target.  */
 int watchpoints_triggered (struct target_waitstatus *);
 

-/* Update BUF, which is LEN bytes read from the target address MEMADDR,
-   by replacing any memory breakpoints with their shadowed contents.  */
-void breakpoint_restore_shadows (gdb_byte *buf, ULONGEST memaddr, 
-                                LONGEST len);
+/* Helper for transparent breakpoint hiding for memory read and write
+   routines.
+
+   Update one of READBUF or WRITEBUF with either the shadows
+   (READBUF), or the breakpoint instructions (WRITEBUF) of inserted
+   breakpoints at the memory range defined by MEMADDR and extending
+   for LEN bytes.  If writing, then WRITEBUF is a copy of WRITEBUF_ORG
+   on entry.*/
+extern void breakpoint_xfer_memory (gdb_byte *readbuf, gdb_byte *writebuf,
+                                   const gdb_byte *writebuf_org,
+                                   ULONGEST memaddr, LONGEST len);
+
+/* Return true if breakpoints should be inserted now.  That'll be the
+   case if either:

 
 

-extern int breakpoints_always_inserted_mode (void);
+    - the target has global breakpoints.
+
+    - "breakpoint always-inserted" is on, and the target has
+      execution.
+
+    - threads are executing.
+*/
+extern int breakpoints_should_be_inserted_now (void);

 
 /* Called each time new event from target is processed.
    Retires previously deleted breakpoint locations that
 
 /* Called each time new event from target is processed.
    Retires previously deleted breakpoint locations that


@@ -1094,17 +1523,15 @@ extern int catch_syscall_enabled (void);
    Returns 0 if not, greater than 0 if we are.  */
 extern int catching_syscall_number (int syscall_number);
 
    Returns 0 if not, greater than 0 if we are.  */
 extern int catching_syscall_number (int syscall_number);
 

-/* Tell a breakpoint to be quiet.  */
-extern void make_breakpoint_silent (struct breakpoint *);
-

 /* Return a tracepoint with the given number if found.  */
 /* Return a tracepoint with the given number if found.  */

-extern struct breakpoint *get_tracepoint (int num);
+extern struct tracepoint *get_tracepoint (int num);

 
 

-extern struct breakpoint *get_tracepoint_by_number_on_target (int num);
+extern struct tracepoint *get_tracepoint_by_number_on_target (int num);

 
 /* Find a tracepoint by parsing a number in the supplied string.  */
 
 /* Find a tracepoint by parsing a number in the supplied string.  */

-extern struct breakpoint *get_tracepoint_by_number (char **arg, int multi_p,
-                                                   int optional_p);
+extern struct tracepoint *
+     get_tracepoint_by_number (char **arg, 
+                              struct get_number_or_range_state *state);

 
 /* Return a vector of all tracepoints currently defined.  The vector
    is newly allocated; the caller should free when done with it.  */
 
 /* Return a vector of all tracepoints currently defined.  The vector
    is newly allocated; the caller should free when done with it.  */


@@ -1137,4 +1564,20 @@ extern void end_rbreak_breakpoints (void);
 extern struct breakpoint *iterate_over_breakpoints (int (*) (struct breakpoint *,
                                                             void *), void *);
 
 extern struct breakpoint *iterate_over_breakpoints (int (*) (struct breakpoint *,
                                                             void *), void *);
 

+/* Nonzero if the specified PC cannot be a location where functions
+   have been inlined.  */
+
+extern int pc_at_non_inline_function (struct address_space *aspace,
+                                     CORE_ADDR pc,
+                                     const struct target_waitstatus *ws);
+
+extern int user_breakpoint_p (struct breakpoint *);
+
+/* Attempt to determine architecture of location identified by SAL.  */
+extern struct gdbarch *get_sal_arch (struct symtab_and_line sal);
+
+extern void breakpoint_free_objfile (struct objfile *objfile);
+
+extern char *ep_parse_optional_if_clause (char **arg);
+

 #endif /* !defined (BREAKPOINT_H) */
 #endif /* !defined (BREAKPOINT_H) */