+ const struct obj_section *sect1 = *(const struct obj_section **) a;
+ const struct obj_section *sect2 = *(const struct obj_section **) b;
+ const CORE_ADDR sect1_addr = obj_section_addr (sect1);
+ const CORE_ADDR sect2_addr = obj_section_addr (sect2);
+
+ if (sect1_addr < sect2_addr)
+ return -1;
+ else if (sect1_addr > sect2_addr)
+ return 1;
+ else
+ {
+ /* Sections are at the same address. This could happen if
+ A) we have an objfile and a separate debuginfo.
+ B) we are confused, and have added sections without proper relocation,
+ or something like that. */
+
+ const struct objfile *const objfile1 = sect1->objfile;
+ const struct objfile *const objfile2 = sect2->objfile;
+
+ if (objfile1->separate_debug_objfile == objfile2
+ || objfile2->separate_debug_objfile == objfile1)
+ {
+ /* Case A. The ordering doesn't matter: separate debuginfo files
+ will be filtered out later. */
+
+ return 0;
+ }
+
+ /* Case B. Maintain stable sort order, so bugs in GDB are easier to
+ triage. This section could be slow (since we iterate over all
+ objfiles in each call to qsort_cmp), but this shouldn't happen
+ very often (GDB is already in a confused state; one hopes this
+ doesn't happen at all). If you discover that significant time is
+ spent in the loops below, do 'set complaints 100' and examine the
+ resulting complaints. */
+
+ if (objfile1 == objfile2)
+ {
+ /* Both sections came from the same objfile. We are really confused.
+ Sort on sequence order of sections within the objfile. */
+
+ const struct obj_section *osect;
+
+ ALL_OBJFILE_OSECTIONS (objfile1, osect)
+ if (osect == sect1)
+ return -1;
+ else if (osect == sect2)
+ return 1;
+
+ /* We should have found one of the sections before getting here. */
+ gdb_assert (0);
+ }
+ else
+ {
+ /* Sort on sequence number of the objfile in the chain. */
+
+ const struct objfile *objfile;
+
+ ALL_OBJFILES (objfile)
+ if (objfile == objfile1)
+ return -1;
+ else if (objfile == objfile2)
+ return 1;
+
+ /* We should have found one of the objfiles before getting here. */
+ gdb_assert (0);
+ }
+
+ }
+
+ /* Unreachable. */
+ gdb_assert (0);
+ return 0;
+}
+
+/* Select "better" obj_section to keep. We prefer the one that came from
+ the real object, rather than the one from separate debuginfo.
+ Most of the time the two sections are exactly identical, but with
+ prelinking the .rel.dyn section in the real object may have different
+ size. */
+
+static struct obj_section *
+preferred_obj_section (struct obj_section *a, struct obj_section *b)
+{
+ gdb_assert (obj_section_addr (a) == obj_section_addr (b));
+ gdb_assert ((a->objfile->separate_debug_objfile == b->objfile)
+ || (b->objfile->separate_debug_objfile == a->objfile));
+ gdb_assert ((a->objfile->separate_debug_objfile_backlink == b->objfile)
+ || (b->objfile->separate_debug_objfile_backlink == a->objfile));
+
+ if (a->objfile->separate_debug_objfile != NULL)
+ return a;
+ return b;
+}
+
+/* Return 1 if SECTION should be inserted into the section map.
+ We want to insert only non-overlay and non-TLS section. */
+
+static int
+insert_section_p (const struct bfd *abfd,
+ const struct bfd_section *section)
+{
+ const bfd_vma lma = bfd_section_lma (abfd, section);
+
+ if (lma != 0 && lma != bfd_section_vma (abfd, section)
+ && (bfd_get_file_flags (abfd) & BFD_IN_MEMORY) == 0)
+ /* This is an overlay section. IN_MEMORY check is needed to avoid
+ discarding sections from the "system supplied DSO" (aka vdso)
+ on some Linux systems (e.g. Fedora 11). */
+ return 0;
+ if ((bfd_get_section_flags (abfd, section) & SEC_THREAD_LOCAL) != 0)
+ /* This is a TLS section. */
+ return 0;
+
+ return 1;
+}
+
+/* Filter out overlapping sections where one section came from the real
+ objfile, and the other from a separate debuginfo file.
+ Return the size of table after redundant sections have been eliminated. */
+
+static int
+filter_debuginfo_sections (struct obj_section **map, int map_size)
+{
+ int i, j;
+
+ for (i = 0, j = 0; i < map_size - 1; i++)
+ {
+ struct obj_section *const sect1 = map[i];
+ struct obj_section *const sect2 = map[i + 1];
+ const struct objfile *const objfile1 = sect1->objfile;
+ const struct objfile *const objfile2 = sect2->objfile;
+ const CORE_ADDR sect1_addr = obj_section_addr (sect1);
+ const CORE_ADDR sect2_addr = obj_section_addr (sect2);
+
+ if (sect1_addr == sect2_addr
+ && (objfile1->separate_debug_objfile == objfile2
+ || objfile2->separate_debug_objfile == objfile1))
+ {
+ map[j++] = preferred_obj_section (sect1, sect2);
+ ++i;
+ }
+ else
+ map[j++] = sect1;
+ }
+
+ if (i < map_size)
+ {
+ gdb_assert (i == map_size - 1);
+ map[j++] = map[i];
+ }
+
+ /* The map should not have shrunk to less than half the original size. */
+ gdb_assert (map_size / 2 <= j);
+
+ return j;
+}
+
+/* Filter out overlapping sections, issuing a warning if any are found.
+ Overlapping sections could really be overlay sections which we didn't
+ classify as such in insert_section_p, or we could be dealing with a
+ corrupt binary. */
+
+static int
+filter_overlapping_sections (struct obj_section **map, int map_size)
+{
+ int i, j;
+
+ for (i = 0, j = 0; i < map_size - 1; )
+ {
+ int k;
+
+ map[j++] = map[i];
+ for (k = i + 1; k < map_size; k++)
+ {
+ struct obj_section *const sect1 = map[i];
+ struct obj_section *const sect2 = map[k];
+ const CORE_ADDR sect1_addr = obj_section_addr (sect1);
+ const CORE_ADDR sect2_addr = obj_section_addr (sect2);
+ const CORE_ADDR sect1_endaddr = obj_section_endaddr (sect1);
+
+ gdb_assert (sect1_addr <= sect2_addr);
+
+ if (sect1_endaddr <= sect2_addr)
+ break;
+ else
+ {
+ /* We have an overlap. Report it. */
+
+ struct objfile *const objf1 = sect1->objfile;
+ struct objfile *const objf2 = sect2->objfile;
+
+ const struct bfd *const abfd1 = objf1->obfd;
+ const struct bfd *const abfd2 = objf2->obfd;
+
+ const struct bfd_section *const bfds1 = sect1->the_bfd_section;
+ const struct bfd_section *const bfds2 = sect2->the_bfd_section;
+
+ const CORE_ADDR sect2_endaddr = obj_section_endaddr (sect2);
+
+ struct gdbarch *const gdbarch = get_objfile_arch (objf1);
+
+ complaint (&symfile_complaints,
+ _("unexpected overlap between:\n"
+ " (A) section `%s' from `%s' [%s, %s)\n"
+ " (B) section `%s' from `%s' [%s, %s).\n"
+ "Will ignore section B"),
+ bfd_section_name (abfd1, bfds1), objf1->name,
+ paddress (gdbarch, sect1_addr),
+ paddress (gdbarch, sect1_endaddr),
+ bfd_section_name (abfd2, bfds2), objf2->name,
+ paddress (gdbarch, sect2_addr),
+ paddress (gdbarch, sect2_endaddr));
+ }
+ }
+ i = k;
+ }
+
+ if (i < map_size)
+ {
+ gdb_assert (i == map_size - 1);
+ map[j++] = map[i];
+ }
+
+ return j;
+}
+
+
+/* Update PMAP, PMAP_SIZE with sections from all objfiles, excluding any
+ TLS, overlay and overlapping sections. */
+
+static void
+update_section_map (struct program_space *pspace,
+ struct obj_section ***pmap, int *pmap_size)
+{
+ int alloc_size, map_size, i;
+ struct obj_section *s, **map;
projects / deliverable / binutils-gdb.git / blobdiff