-# .Sanitize for devo.
-
########################
+#
+# H H EEEEEE Y Y !!
+# H H E Y Y !!
+# H H E Y Y !!
+# H H E Y !!
+# HHHHHH EEEEE Y !!
+# H H E Y !!
+# H H E Y !!
+# H H E Y
+# H H EEEEEE Y !!
+#
# YO! READ ME!!!!!!!!!
# If you're about to add a file or directory which isn't checked out as part
# of every module in devo (e.g., if "cvs co gas+utils" won't get it, or if
# new file, and will get warnings from Sanitize when everything is really
# okay. You don't want to get people in the habit of ignoring complaints from
# Sanitize, do you? No, I didn't think so.
+#
+# If you do add a file to the regular things-to-keep section, don't forget
+# to add the corresponding entry to the devo-support entry (or whatever) in
+# the modules file.
+#
########################
+# .Sanitize for devo.
+
# Each directory to survive its way into a release will need a file
# like this one called "./.Sanitize". All keyword lines must exist,
# and must exist in the order specified by this file. Each directory
Do-first:
keep_these_too="${keep_these_too} .cvsignore CYGNUS autoconf
- bfd binutils byacc cvs deja-gnu dejagnu diff dosrel dvips emacs emacs19
- examples expect fileutils flex gas gcc gdb gdbm gdbtest glob gprof grep
- groff include install.sh ispell ld libg++ libgcc libgloss libiberty
- libio librx libstdc++ m4 make mmalloc move-if-change newlib opcodes
- pagas patch prms rcs readline sed send-pr shellutils sim tcl textutils
- tk texinfo tgas utils uudecode wdiff xiberty
- configure.bat makeall.bat
- mpw-README mpw-configure mpw-config.in mpw-build.in"
+ apache bash
+ bfd binutils bison byacc cvs deja-gnu dejagnu diff dosrel dvips
+ emacs emacs19 examples expect fileutils findutils flex
+ gas gawk gcc gdb gdbm gdbtest glob gperf gprof grep grez groff guile gzip
+ include inet install-sh ispell
+ ld less libg++ libgcc libgloss libiberty libide libio librx libstdc++
+ m4 make mkinstalldirs mmalloc move-if-change newlib ncurses opcodes
+ pagas patch perl prms
+ rcs readline sed send-pr shellutils sim tar textutils time
+ texinfo tgas utils uudecode wdiff xiberty
+ configure.bat makeall.bat setup.com makefile.vms winsup
+ mpw-README mpw-configure mpw-config.in mpw-build.in mpw-install
+ ltconfig ltmain.sh missing ylwrap"
lose_these_too="${lose_these_too} testsuite"
lose_these_too="${lose_these_too} ${cygnus_files}"
fi
-gdbtk_files="tcl tk"
+gdbtk_files="tcl tk itcl tix"
if ( echo $* | grep lose\-gdbtk > /dev/null) ; then
lose_these_too="${lose_these_too} ${gdbtk_files}"
fi
# This is for newlib net releases.
-newlib_files="COPYING.NEWLIB"
+newlib_file="COPYING.NEWLIB"
+
+if (echo $* | grep keep\-newlib > /dev/null) ; then
+ if (echo $* | grep -v keep\-cygnus > /dev/null) ; then
+ keep_these_too="${keep_these_too} ${newlib_file}"
+ lose_these_too="`echo ${lose_these_too} | sed -e s/${newlib_file}//`"
+ fi
+else
+ true; # Let keep-cygnus handle it.
+fi
+
+# IDK releases don't include files which only matter to CDK.
+inet_files="COPYING.LIB config config-ml.in etc symlink-tree"
+
+if (echo $* | grep keep\-inet > /dev/null); then
+ lose_these_too="${lose_these_too} ${inet_files}"
+else
+ keep_these_too="${keep_these_too} ${inet_files}"
+fi
+
+ide_files="vmake"
-if ( echo $* | grep keep\-newlib > /dev/null) ; then
- keep_these_too="${keep_these_too} ${newlib_files}"
+if (echo $* | grep keep\-ide > /dev/null); then
+ keep_these_too="${keep_these_too} ${ide_files}"
+ test -n "$verbose" && echo Keeping ${ide_files}
else
- lose_these_too="${lose_these_too} ${newlib_files}"
+ lose_these_too="${lose_these_too} ${ide_files}"
fi
+
# This top-level directory is special. We often check out only subsets
# of this directory, and complaining about directories or files we didn't
# check out just gets obnoxious.
Things-to-keep:
COPYING
-COPYING.LIB
ChangeLog
Makefile.in
README
-config
-cfg-ml-com.in
-cfg-ml-pos.in
config.guess
config.sub
configure
configure.in
-etc
Things-to-lose:
fi
if [ -n "${verbose}" ] ; then
- echo Processing \"arc\"...
+ echo Processing \"d30v\"...
fi
-arc_files="config.sub configure.in cfg-ml-com.in"
+d30v_files="ChangeLog config.sub configure.in"
-if ( echo $* | grep keep\-arc > /dev/null ) ; then
- for i in $arc_files ; do
- if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+if ( echo $* | grep keep\-d30v > /dev/null ) ; then
+ for i in $d30v_files ; do
+ if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping arc stuff in $i
+ echo Keeping d30v stuff in $i
fi
fi
done
else
for i in * ; do
- if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+ if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"arc\" from $i...
+ echo Removing traces of \"d30v\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-arc/,/end-\sanitize\-arc/d' < $i > new
+ sed '/start\-sanitize\-d30v/,/end-\sanitize\-d30v/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
-psion_files="config.sub configure.in"
+if [ -n "${verbose}" ] ; then
+ echo Processing \"v850\"...
+fi
-if ( echo $* | grep keep\-psion > /dev/null ) ; then
- for i in $psion_files; do
- if test ! -d $i && (grep sanitize-psion $i > /dev/null) ; then
+v850_files="ChangeLog config.sub configure.in"
+
+if ( echo $* | grep keep\-v850e > /dev/null ) ; then
+ for i in $v850_files ; do
+ if test ! -d $i && (grep sanitize-v850e $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping psion stuff in $i
+ echo Keeping v850e stuff in $i
fi
fi
done
else
for i in * ; do
- if test ! -d $i && (grep sanitize-psion $i > /dev/null) ; then
+ if test ! -d $i && (grep sanitize-v850e $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"psion\" from $i...
+ echo Removing traces of \"v850e\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-psion/,/end-\sanitize\-psion/d' < $i > new
+ sed '/start\-sanitize\-v850e/,/end-\sanitize\-v850e/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
-rce_files="config.sub"
+r5900_files="ChangeLog config.sub configure.in"
-if ( echo $* | grep keep\-rce > /dev/null ) ; then
- for i in $rce_files ; do
- if test ! -d $i && (grep sanitize-rce $i > /dev/null) ; then
+if ( echo $* | grep keep\-r5900 > /dev/null ) ; then
+ for i in $r5900_files ; do
+ if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping rce stuff in $i
+ echo Keeping r5900 stuff in $i
fi
fi
done
else
- for i in $rce_files ; do
- if test ! -d $i && (grep sanitize-rce $i > /dev/null) ; then
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"r5900\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-r5900/,/end-\sanitize\-r5900/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+tx19_files="ChangeLog config.sub"
+
+if ( echo $* | grep keep\-tx19 > /dev/null ) ; then
+ for i in $tx19_files ; do
+ if test ! -d $i && (grep sanitize-tx19 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping tx19 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-tx19 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"tx19\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-tx19/,/end-\sanitize\-tx19/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+tx49_files="ChangeLog config.sub"
+
+if ( echo $* | grep keep\-tx49 > /dev/null ) ; then
+ for i in $tx49_files ; do
+ if test ! -d $i && (grep sanitize-tx49 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping tx49 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-tx49 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"tx49\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-tx49/,/end-\sanitize\-tx49/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+tic80_files="ChangeLog config.sub configure.in"
+
+if ( echo $* | grep keep\-tic80 > /dev/null ) ; then
+ for i in $tic80_files ; do
+ if test ! -d $i && (grep sanitize-tic80 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping tic80 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-tic80 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"tic80\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-tic80/,/end-\sanitize\-tic80/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+if ( echo $* | grep keep\-ide > /dev/null ) ; then
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-ide $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping ide stuff in $i
+ fi
+ fi
+ done
+else
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-ide $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"ide\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-ide/,/end-\sanitize\-ide/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
+ echo Catering to RMS by removing traces of \"gdbtk\"...
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"gdbtk\" from Makefile.in...
+ fi
+ cp Makefile.in new
+ sed -e '/GDBTK_SUPPORT_DIRS=/d' -e 's/ $(GDBTK_SUPPORT_DIRS)//' < Makefile.in > new
+ if [ -n "${safe}" -a ! -f .Recover/Makefile.in ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching Makefile.in in .Recover...
+ fi
+ mv Makefile.in .Recover
+ fi
+ mv new Makefile.in
+fi
+
+vr5400_files="ChangeLog config.sub"
+
+if ( echo $* | grep keep\-vr5400 > /dev/null ) ; then
+ for i in $vr5400_files ; do
+ if test ! -d $i && (grep sanitize-vr5400 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping vr5400 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-vr5400 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"rce\" from $i...
+ echo Removing traces of \"vr5400\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-rce/,/end-\sanitize\-rce/d' < $i > new
+ sed '/start\-sanitize\-vr5400/,/end-\sanitize\-vr5400/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
+# Do this check LAST!
for i in * ; do
if test ! -d $i && (grep sanitize $i > /dev/null) ; then
echo '***' Some mentions of Sanitize are still left in $i! 1>&2
+ exit 1
fi
done
projects / deliverable / binutils-gdb.git / blobdiff