+2015-05-13 John David Anglin <dave.anglin@bell.net>
+
+ * configure.ac: Disable configuration of GDB for HPUX targets.
+ * configure: Regenerate.
+
+2015-05-01 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR ld/18355
+ * Makefile.def: Add extra_configure_flags to host zlib.
+ * configure.ac (extra_host_zlib_configure_flags): New. Set
+ to --enable-host-shared When bfd is to be built as shared
+ library. AC_SUBST.
+ * Makefile.in: Regenerated.
+
+2015-04-15 Mike Frysinger <vapier@gentoo.org>
+ Hans-Peter Nilsson <hp@axis.com>
+
+ Adjust src-release.sh for sim using the gdb create-version.sh.
+ * src-release.sh (tar_compress): If there's a fifth parameter,
+ use that in the getver call instead of $tool.
+ (sim_release): Pass gdb as fifth parameter to tar_compress.
+ (SIM_SUPPORT_DIRS): Add gdb/common/create-version.sh.
+
+2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
+
+ * configure.ac: Add --with-system-zlib.
+ * configure: Regenerated.
+
+2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
+
+ * src-release.sh: Don't configure with --with-target-subdir=.
+ --disable-multilib.
+
+2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
+
+ * src-release.sh (DEVO_SUPPORT): Replace src-release with
+ src-release.sh.
+
+2015-03-30 Ed Schouten <ed@nuxi.nl>
+
+ * config.sub: Update from upstream, to 2015-03-04 version.
+ * config.guess: Likewise.
+
+2015-03-30 H.J. Lu <hongjiu.lu@intel.com>
+
+ * Makefile.def (dependencies): Add all-zlib to all-bfd.
+ * Makefile.in: Regenerated.
+
+2015-03-28 H.J. Lu <hongjiu.lu@intel.com>
+
+ * src-release.sh (do_proto_toplev): Configure with --target
+ --with-target-subdir and --disable-multilib.
+ (BINUTILS_SUPPORT_DIRS): Add zlib.
+ (GAS_SUPPORT_DIRS): Likewise.
+ (GDB_SUPPORT_DIRS): Likewise.
+ (SIM_SUPPORT_DIRS): Likewise.
+
+2015-03-17 H.J. Lu <hongjiu.lu@intel.com>
+
+ * configure.ac (target_configdirs): Exclude target-zlib if
+ target-libjava isn't built.
+ * configure: Regenerated.
+
+2015-03-17 H.J. Lu <hongjiu.lu@intel.com>
+
+ Sync with GCC
+ 2014-06-13 Thomas Schwinge <thomas@codesourcery.com>
+
+ * config-ml.in: Robustify ac_configure_args parsing.
+
+2015-03-16 H.J. Lu <hongjiu.lu@intel.com>
+
+ * Makefile.def: Updated from GCC trunk.
+ * Makefile.tpl: Likewise.
+ * configure.ac: Likewise.
+ * Makefile.in: Regenerated.
+ * configure: Likewise.
+
+2015-01-28 James Bowman <james.bowman@ftdichip.com>
+
+ * configure.ac: Add FT32 support.
+ * configure: Regenerate.
+
+2015-01-12 Anthony Green <green@moxielogic.com>
+
+ * configure.ac: Don't disable gprof for moxie.
+ * configure: Rebuild.
+
+2015-01-03 Andrew Pinski <apinski@cavium.com>
+
+ * Makefile.def (flags_to_pass): Pass OBJCOPY_FOR_TARGET also.
+ * Makefile.tpl (HOST_EXPORTS): Add OBJCOPY_FOR_TARGET.
+ (BASE_TARGET_EXPORTS): Add OBJCOPY.
+ (OBJCOPY_FOR_TARGET): New variable.
+ (EXTRA_TARGET_FLAGS): Add OBJCOPY.
+ * Makefile.in: Regenerate.
+ * configure.ac: Check for already installed target objcopy.
+ Also GCC_TARGET_TOOL on objcopy.
+ * configure: Regenerate.
+
+2015-01-02 Hans-Peter Nilsson <hp@bitrange.com>
+
+ * config.sub: Update from upstream, to 2015-01-01 version.
+ * config.guess: Ditto.
+
+2014-12-06 Eric Botcazou <ebotcazou@adacore.com>
+
+ * config.sub: Update from upstream config repo.
+
+2014-11-24 H.J. Lu <hongjiu.lu@intel.com>
+
+ * libtool.m4: Updated from GCC trunk.
+
+2014-11-16 Jan-Benedict Glaw <jbglaw@lug-owl.de>
+
+ * config.guess: Update from upstream config repo.
+ * config.sub: Ditto.
+
+2014-11-16 Jan-Benedict Glaw <jbglaw@lug-owl.de>
+
+ * move-if-change: Update from upstream gnulib.
+
+2014-11-16 Jan-Benedict Glaw <jbglaw@lug-owl.de>
+
+ * compile: Sync with upstream Automake.
+ * depcomp: Ditto.
+ * install-sh: Ditto.
+ * missing: Ditto.
+ * mkinstalldirs: Ditto.
+ * ylwrap: Ditto.
+
+2014-10-15 Tristan Gingold <gingold@adacore.com>
+
+ * src-release.sh (do_proto_toplev): Configure with --target.
+
+2014-10-03 Jing Yu <jingyu@google.com>
+
+ * configure.ac: Add aarch64 to list of targets that support gold.
+ * configure: Regenerate.
+
+2014-09-12 Andrew Bennett <andrew.bennett@imgtec.com>
+
+ * configure.ac: Add mips*-img-elf* target triple.
+ * configure: Regenerate.
+
+2014-09-06 Kuan-Lin Chen <kuanlinchentw@gmail.com>
+ * configure: Disable gdb for nds32*-*-* until supported.
+ * configure.ac: Disable gdb for nds32*-*-* until supported.
+
+2014-09-05 Joel Brobecker <brobecker@adacore.com>
+
+ * configure: Regenerate.
+
+2014-08-27 Will Newton <will.newton@linaro.org>
+
+ * src-release.sh: New file.
+ * src-release: Remove file.
+
+2014-07-27 Joel Sherrill <joel.sherrill@oarcorp.com>
+
+ GDB not supported for or1k*-*-rtems*
+ * configure.ac (or1k*-*-rtems*): gdb not supported. The ordering
+ of the stanzas results in this not being caught by or1k*-*-* later.
+ * configure. Regenerated.
+
+2014-07-25 Samuel Bronson <naesten@gmail.com>
+
+ * .gitattributes: New file for use with git-merge-changelog.
+
+2014-07-21 Joel Sherrill <joel.sherrill@oarcorp.com>
+
+ Disable gdb for or1k*-*-* until supported
+ * configure.ac (or1k*-*-*): Disable gdb.
+ * configure: Regenerated.
+
+2014-05-14 Sandra Loosemore <sandra@codesourcery.com>
+
+ * configure.ac (target_makefile_frag): Set for nios2-*-elf*.
+ * configure: Regenerated.
+
+2014-03-26 Jakub Jelinek <jakub@redhat.com>
+
+ PR sanitizer/56781
+ * Makefile.def: Set bootstrap=true; for host fixincludes.
+ * configure.ac: Don't bootstrap host fixincludes unless
+ --with-build-config=bootstrap-{a,ub}san.
+ * Makefile.in: Regenerated.
+ * configure: Regenerated.
+
+2014-03-21 Jakub Jelinek <jakub@redhat.com>
+
+ * configure.ac: Move BUILD_CONFIG set up earlier. Add
+ --enable-vtable-verify option parsing. Don't add
+ target-libsanitizer to bootstrap_target_libs unless
+ --with-build-config=bootstrap-asan or
+ --with-build-config=bootstrap-ubsan. Don't add target-libvtv
+ to bootstrap_target_libs unless --enable-vtable-verify.
+ * configure: Regenerated.
+
+2014-03-07 Jakub Jelinek <jakub@redhat.com>
+
+ PR bootstrap/58572
+ * Makefile.tpl (POSTSTAGE1_CXX_EXPORT): Use -isystem instead of
+ -I for libstdc++-v3 includes if $(LEAN).
+ * Makefile.in: Regenerated.
+
+2014-02-24 Walter Lee <walt@tilera.com>
+
+ * configure.ac (tilepro-*-*) Change to tilepro*-*-*.
+ (tilegx-*-*): Change to tilegx*-*-*.
+ * configure: Regenerate.
+
+2014-05-01 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config.sub, config.guess: Import from upstream.
+
+2014-04-04 Eric Botcazou <ebotcazou@adacore.com>
+
+ PR bootstrap/60620
+ * Makefile.def (dependencies): Make gnattools depend on libstdc++-v3.
+ * Makefile.in: Regenerate.
+
+2014-03-28 Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
+
+ * Makefile.def (dependencies): Make all-ld depend on all-binutils
+ for WINDRES_FOR_TARGET in default-manifest.o rule.
+ * Makefile.in: Regenerate.
+
+2014-02-04 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ PR target/59788
+ * ltmain.sh (opt_duplicate_compiler_generated_deps): Enable on
+ *solaris2*.
+
+2013-12-19 Keven Boell <keven.boell@intel.com>
+
+ * cp-namespace.c (cp_lookup_nested_symbol): Enable
+ nested lookups for fortran modules.
+ * dwarf2read.c (read_module): Add fortran module to
+ the symbol table.
+ (add_partial_symbol, add_partial_module): Add fortran
+ module to the partial symbol table.
+ (new_symbol_full): Create full symbol for fortran module.
+ * f-exp.y (yylex): Add new module domain to be parsed.
+ * symtab.h: New domain for fortran modules.
+
+2013-12-19 Keven Boell <keven.boell@intel.com>
+
+ * f-exp.y (yylex): Add domain array to enable lookup
+ in multiple domains. Loop over lookup domains and try
+ to find requested symbol. Add STRUCT_DOMAIN to lookup
+ domains to be able to query for user defined types.
+
+2013-12-13 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>
+
+ * configure.ac: Add user-friendly check for native x86_64-linux
+ multilibs.
+ * configure: Regenerate.
+
+2013-11-23 Alan Modra <amodra@gmail.com>
+
+ * config.sub, config.guess: Import from upstream.
+
2013-11-07 Thomas Schwinge <thomas@codesourcery.com>
* Makefile.in: Regenerate.
2013-10-29 Balaji V. Iyer <balaji.v.iyer@intel.com>
- * Makefile.def: Add libcilkrts to target_modules. Make libcilkrts
+ * Makefile.def: Add libcilkrts to target_modules. Make libcilkrts
depend on libstdc++ and libgcc.
* configure: Regenerate.
* configure.ac: Added libcilkrts to target binaries. Also, restrict