+Tue Jun 17 15:31:20 1997 Brendan Kehoe <brendan@lisa.cygnus.com>
+
+ * configure.in (is_cross_compiler): If we're building
+ mips-sgi-irix6* native, turn on ENABLE_MULTILIB and set TARGET_SUBDIR.
+
+Tue Jun 17 12:20:59 1997 Tom Tromey <tromey@cygnus.com>
+
+ * Makefile.in (all-sn): Depend on all-grep.
+
+Mon Jun 16 11:11:10 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Use mh-ppcpic and mt-ppcpic for powerpc*-* targets.
+
+ * configure: Set CFLAGS and CXXFLAGS, and substitute them into
+ Makefile. From Jeff Makey <jeff@cts.com>.
+ * Makefile.in: Add comment for CFLAGS and CXXFLAGS.
+
+ * Makefile.in (DISTBISONFILES): Remove.
+ (taz): Don't futz with DISTBISONFILES. Change BISON to use
+ $(DEFAULT_YACC).
+
+ * configure.in: Build itl, db, sn, etc., when building for native
+ cygwin32.
+
+ * Makefile.in (LD): New variable.
+ (EXTRA_HOST_FLAGS): Pass down LD.
+ ($(DO_X)): Likewise.
+
+Mon Jun 16 11:10:35 1997 Philip Blundell <Philip.Blundell@pobox.com>
+
+ * Makefile.in (INSTALL): Use $(SHELL) when executing install-sh.
+
+Fri Jun 13 10:22:56 1997 Bob Manson <manson@charmed.cygnus.com>
+
+ * configure.in (targargs): Strip out any supplied --build argument
+ before adding our own. Always add --build.
+
+Thu Jun 12 21:12:28 1997 Bob Manson <manson@charmed.cygnus.com>
+
+ * configure.in (targargs): Pass --build if we're doing
+ a cross-compile.
+
+Fri Jun 6 21:38:40 1997 Rob Savoye <rob@chinadoll.cygnus.com>
+
+ * configure: Use '|' instead of ":" as the seperator in
+ sed. Otherwise sed chokes on NT path names with drive
+ designators. Also look for "?:*" as the leading characters in an
+ absolute pathname.
+
+Mon Jun 2 13:05:20 1997 Gavin Koch <gavin@cygnus.com>
+
+ * config.sub: Support for r3900.
+
+Wed May 21 17:33:31 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Use install-sh, not install.sh.
+
+Wed May 14 16:06:51 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (taz): Improve check for BISON so it doesn't try to
+ apply it twice.
+
+Fri May 9 17:22:05 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (INSTALL_MODULES): Put install-opcodes before
+ install-binutils.
+
+Thu May 8 17:29:50 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in: Add automake targets.
+ * configure.in (host_tools): Add automake.
+
+start-sanitize-ide
+Thu May 8 17:09:12 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (all-libide): Depend upon all-ilu.
+
+end-sanitize-ide
+Tue May 6 15:49:52 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure: Default CXX to c++, not gcc.
+ * Makefile.in (CXX): Set to c++, not gcc.
+ (CXX_FOR_TARGET): When cross, transform c++, not gcc.
+
+start-sanitize-ide
+Tue May 6 11:23:57 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in: Add ILU targets.
+ * configure.in (host_tools): Add ILU.
+
+end-sanitize-ide
+Thu May 1 10:11:43 1997 Geoffrey Noer <noer@cygnus.com>
+
+ * install-sh: try appending a .exe if source file doesn't
+ exist
+
+Wed Apr 30 12:05:36 1997 Jason Merrill <jason@yorick.cygnus.com>
+
+ * configure.in: Turn on multilib by default.
+ (cross_only): Remove target-libiberty.
+
+ * Makefile.in (all-gcc): Don't depend on libiberty.
+
+start-sanitize-ide
+Tue Apr 29 11:26:36 1997 Tom Tromey <tromey@cygnus.com>
+
+ * configure.in (host_tools): Added vmake.
+
+end-sanitize-ide
+Mon Apr 28 18:39:45 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * config.guess: improve algorithm for recognizing Gnu Hurd x86.
+
+Thu Apr 24 19:30:07 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (DEVO_SUPPORT): Add mpw-install.
+ (DISTBISONFILES): Add ld/Makefile.in
+
+Tue Apr 22 17:17:28 1997 Geoffrey Noer <noer@pizza.cygnus.com>
+
+ * configure.in: if target is cygwin32 but host isn't cygwin32,
+ don't configure gdb tcl tk expect, not just gdb.
+
+Mon Apr 21 13:33:39 1997 Tom Tromey <tromey@cygnus.com>
+
+ * configure.in: Added gnuserv everywhere sn appears.
+
+ * Makefile.in (ALL_MODULES): Added all-gnuserv.
+ (CROSS_CHECK_MODULES): Added check-gnuserv.
+ (INSTALL_MODULES): Added install-gnuserv.
+ (CLEAN_MODULES): Added clean-gnuserv.
+ (all-gnuserv): New target.
+
+start-sanitize-ide
+Fri Apr 18 18:10:44 1997 Tom Tromey <tromey@cygnus.com>
+
+ * configure.in (host_libs): Added libide.
+ Skip libide, vmake if no X. Also skip these everywhere that sn is
+ skipped.
+
+ * Makefile.in (ALL_MODULES): Added all-vmake, all-libide.
+ (CROSS_CHECK_MODULES): Added check-vmake, check-libide.
+ (INSTALL_MODULES): Added install-vmake, install-libide.
+ (CLEAN_MODULES): Added clean-vmake, clean-libide.
+ (all-vmake, all-libide): New targets.
+
+end-sanitize-ide
+Thu Apr 17 13:57:06 1997 Per Fogelstrom <pefo@openbsd.org>
+
+ * config.guess: Fixes for MIPS OpenBSD systems.
+
+Tue Apr 15 12:21:07 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (INSTALL_XFORM): Remove.
+ (BASE_FLAGS_TO_PASS): Remove INSTALL_XFORM.
+
+ * mkinstalldirs: New file, copied from automake.
+ * Makefile.in (installdirs): Rename from install-dirs. Use
+ mkinstalldirs. Change all users.
+ (DEVO_SUPPORT): Add mkinstalldirs.
+
+Mon Apr 14 11:21:38 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * install-sh: Rename from install.sh.
+ * Makefile.in (INSTALL): Change install.sh to install-sh.
+ (DEVO_SUPPORT): Likewise.
+
+ * configure: Use ${config_shell} with ${moveifchange}. From Thomas
+ Graichen <graichen@rzpd.de>.
+
+Fri Apr 11 16:37:10 1997 Niklas Hallqvist <niklas@appli.se>
+
+ * config.guess: Recognize OpenBSD systems correctly.
+
+Fri Apr 11 17:07:04 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
+
+ * README, Makefile.in (ETC_SUPPORT): Remove references to
+ cfg-paper*, configure.{texi,man,info*}._
+
+Sun Apr 6 18:47:57 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * Makefile.in (all.normal): Ensure that gcc is built after all
+ the x11 - ie gdb - targets.
+
+Tue Apr 1 16:28:50 1997 Klaus Kaempf <kkaempf@progis.de>
+
+ * makefile.vms: Don't run conf-a-gas.
+
+Mon Mar 31 16:26:55 1997 Joel Sherrill <joel@oarcorp.com>
+
+ * configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
+
+start-sanitize-tic80
+Sun Mar 30 12:38:27 1997 Fred Fish <fnf@cygnus.com>
+
+ * configure.in: Remove noconfigdirs case since gdb also
+ configures and builds for tic80-coff.
+
+end-sanitize-tic80
+Fri Mar 28 18:28:52 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure: Set cache_file to config.cache.
+ * Makefile.in (local-distclean): Remove config.cache.
+
+Wed Mar 26 18:49:39 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * COPYING: Update FSF address.
+
+start-sanitize-tic80
+Wed Mar 26 10:38:25 1997 Michael Meissner <meissner@cygnus.com>
+
+ * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
+ noconfigdirs.
+
+end-sanitize-tic80
+Mon Mar 24 15:02:39 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (install-dirs): Don't crash if prefix, and hence
+ MAKEDIRS, is empty.
+
+Mon Mar 24 12:40:55 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * config.sub: Tweak mn10300 entry.
+
+Fri Mar 21 15:35:27 1997 Michael Meissner <meissner@cygnus.com>
+
+ * configure.in (host_tools): Put sim before gdb, so gdb's
+ configure.tgt can determine if the simulator was configured.
+
+Sun Mar 16 16:07:08 1997 Fred Fish <fnf@cygnus.com>
+
+ * config.sub: Move BeOS $os case to be with other Cygnus
+ local cases.
+
+Sun Mar 16 01:34:55 1997 Martin Hunt <hunt@cygnus.com>
+
+ * config.sub: Remove misplaced comment that broke Linux.
+
+Sat Mar 15 22:50:15 1997 Fred Fish <fnf@cygnus.com>
+
+ * config.sub: Add BeOS support.
+
+Mon Mar 10 13:30:11 1997 Tom Tromey <tromey@cygnus.com>
+
+ * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
+
+Wed Mar 5 12:09:29 1997 Martin <hunt@cygnus.com>
+
+ * configure.in (noconfigdirs): Remove tcl and tk from
+ noconfigdirs for cygwin32 builds.
+
+start-sanitize-tic80
+Fri Feb 28 18:20:15 1997 Fred Fish <fnf@cygnus.com>
+
+ * configure.in (tic80-*-*): Remove ld from noconfigdirs.
+
+end-sanitize-tic80
+Thu Feb 27 14:57:26 1997 Ken Raeburn <raeburn@cygnus.com>
+
+ * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
+ make-all.com, use makefile.vms instead.
+
+Tue Feb 25 18:46:14 1997 Stan Shebs <shebs@andros.cygnus.com>
+
+ * config.sub: Accept -lnews*.
+
+start-sanitize-d30v
+Tue Feb 25 13:19:14 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * configure.in (noconfigdirs): Disable target-newlib,
+ target-examples and target-libiberty for d30v.
+
+end-sanitize-d30v
+start-sanitize-tic80
+Tue Feb 25 11:41:51 1997 Tom Tromey <tromey@cygnus.com>
+
+ * configure.in (host_libs): Build itcl after tcl, tk.
+
+ * configure.in (host_libs): Added db, itcl.
+ (host_tools): Added sn.
+ (noconfigdirs): Added itcl, db, sn in appropriate places.
+ (native_only): Added sn.
+
+ * Makefile.in (all-db, all-sn): New targets.
+ (ALL_MODULES): Added all-sn.
+ (CROSS_CHECK_MODULES): Added check-sn.
+ (INSTALL_MODULES): Added install-sn.
+ (CLEAN_MODULES): Added clean-sn.
+
+end-sanitize-tic80
start-sanitize-d30v
Fri Feb 21 17:56:25 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
* configure.in (noconfigdirs): Enable ld for d30v.
+
end-sanitize-d30v
start-sanitize-tic80
Fri Feb 21 20:58:51 1997 Michael Meissner <meissner@cygnus.com>
* configure.in: Don't use --with-stabs on IRIX 6.
-start-sanitize-m32r
Tue Dec 3 09:05:25 1996 Doug Evans <dje@canuck.cygnus.com>
* configure.in (m32r): Build gdb, libg++ now.
-end-sanitize-m32r
Sun Dec 1 00:18:59 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* configure.in (mips*-sgi-irix6*): Remove gdb and related
CC_FOR_TARGET was specified on the command line.
(MAKEOVERRIDES): Don't define.
-start-sanitize-m32r
Thu Oct 17 10:27:56 1996 Doug Evans <dje@canuck.cygnus.com>
* configure.in (m32r): Fix spelling of libg++ libs.
-end-sanitize-m32r
Thu Oct 10 10:37:17 1996 Stan Shebs <shebs@andros.cygnus.com>
* config.sub (-apple*): Remove, now redundant.
* configure.in: Use a single line for host_tools and native_only.
-start-sanitize-m32r
Mon Sep 9 12:21:30 1996 Doug Evans <dje@canuck.cygnus.com>
* config.sub, configure.in: Add entries for m32r.
-end-sanitize-m32r
Thu Sep 5 13:52:47 1996 Tom Tromey <tromey@creche.cygnus.com>
* Makefile.in (inet-install): Don't run install-gzip.
projects / deliverable / binutils-gdb.git / blobdiff