# We don't specify -g -O because many compilers don't support -g -O,
# and/or -O is broken in and of itself.
CFLAGS = -g
+LIBCFLAGS = $(CFLAGS)
+CFLAGS_FOR_TARGET = $(CFLAGS)
+LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
# start-sanitize-chill
CHILLFLAGS = $(CFLAGS)
# end-sanitize-chill
CXX = gcc
-# Use -O to stress test the compiler.
-CXXFLAGS = -g -O -fexternal-templates
+# Use -O2 to stress test the compiler.
+CXXFLAGS = -g -O2
+LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
+CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
+LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
RANLIB = ranlib
NM = nm
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
- t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \
+ t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
fi; \
fi`
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
- t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \
+ t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
fi; \
fi`
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CXX); \
else \
- t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \
+ t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
fi; \
fi`
AS_FOR_TARGET = ` \
- if [ -f $$r/gas/Makefile ] ; then \
+ if [ -f $$r/gas/as.new ] ; then \
echo $$r/gas/as.new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(AS); \
else \
- t='$(program_transform_name)'; echo as | sed -e 's/brokensed/brokensed/' $$t ; \
+ t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
fi; \
fi`
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(AR); \
else \
- t='$(program_transform_name)'; echo ar | sed -e 's/brokensed/brokensed/' $$t ; \
+ t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
fi; \
fi`
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(RANLIB); \
else \
- t='$(program_transform_name)'; echo ranlib | sed -e 's/brokensed/brokensed/' $$t ; \
+ t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
fi; \
fi`
NM_FOR_TARGET = ` \
- if [ -f $$r/binutils/Makefile ] ; then \
+ if [ -f $$r/binutils/nm.new ] ; then \
echo $$r/binutils/nm.new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(NM); \
else \
- t='$(program_transform_name)'; echo nm | sed -e 's/brokensed/brokensed/' $$t ; \
+ t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
fi; \
fi`
-
#### host and target specific makefile fragments come in here.
###
"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
+ "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
$(start-sanitize-chill)\
"CHILLFLAGS=$(CHILLFLAGS)" \
"CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
$(end-sanitize-chill)\
"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
"CXXFLAGS=$(CXXFLAGS)" \
+ "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
"GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"INSTALL_XFORM=$(INSTALL_XFORM)" \
"LDFLAGS=$(LDFLAGS)" \
"LEX=$(LEX)" \
+ "LIBCFLAGS=$(LIBCFLAGS)" \
+ "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
+ "LIBCXXFLAGS=$(LIBCFLAGS)" \
+ "LIBCXXFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
"M4=$(M4)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
"NM_FOR_TARGET=$(NM_FOR_TARGET)" \
'AR=$$(AR_FOR_TARGET)' \
'AS=$$(AS_FOR_TARGET)' \
'CC=$$(CC_FOR_TARGET)' \
+ 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
'CXX=$$(CXX_FOR_TARGET)' \
+ 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
+ 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
+ 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
'NM=$$(NM_FOR_TARGET)' \
'RANLIB=$$(RANLIB_FOR_TARGET)'
all-make \
all-mmalloc \
all-opcodes \
- all-pagas \
all-patch \
all-prms \
all-rcs \
all-uudecode \
all-wdiff
-
# This is a list of the check targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
# This is a list of the check targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
#
-# The list is in two parts. Those that only have checks when
-# compiling
-CROSS_CHECK_MODULES = \
+# The list is in two parts. The first lists those tools which
+# are tested as part of the host's native tool-chain, and not
+# tested in a cross configuration.
+NATIVE_CHECK_MODULES = \
+ check-byacc \
check-flex
-HOST_ONLY_CHECK_MODULES = \
+CROSS_CHECK_MODULES = \
check-autoconf \
check-bfd \
check-binutils \
- check-byacc \
check-cvs \
check-dejagnu \
check-diff \
check-etc \
check-fileutils \
check-find \
- check-flex \
check-gas \
check-gawk \
check-gdb \
check-make \
check-mmcheckoc \
check-opcodes \
- check-pagas \
check-patch \
check-prms \
check-rcs \
check-time \
check-uudecode \
check-wdiff
-CHECK_MODULES=$(HOST_ONLY_CHECK_MODULES) $(CROSS_CHECK_MODULES)
+
+CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
# This is a list of the install targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
install-make \
install-mmalloc \
install-opcodes \
- install-pagas \
install-patch \
install-prms \
install-rcs \
# using $(X11_FLAGS_TO_PASS).
ALL_X11_MODULES = \
all-emacs \
+ all-emacs19 \
all-expect \
all-gash \
all-tclX \
# compiled using $(X11_FLAGS_TO_PASS).
INSTALL_X11_MODULES = \
install-emacs \
+ install-emacs19 \
install-expect \
install-gash \
install-tclX \
all-chillrt \
$(end-sanitize-chill) \
all-libio \
+ all-libstdc++ \
+ all-librx \
all-libg++ \
all-newlib \
+ all-libgloss \
all-xiberty
# This is a list of the check targets for all of the modules which are
check-chillrt \
$(end-sanitize-chill) \
check-libio \
+ check-libstdc++ \
check-libg++ \
check-newlib \
check-xiberty
install-chillrt \
$(end-sanitize-chill) \
install-libio \
+ install-libstdc++ \
install-libg++ \
install-newlib \
+ install-libgloss \
install-xiberty
# This is a shell case of all modules which are compiled using
# $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
-TARGET_LIBS = libio | libg++ | newlib | xiberty
+TARGET_LIBS = libio | libstdc++ | librx | libg++ | newlib | xiberty
# start-sanitize-chill
-TARGET_LIBS = chillrt | libio | libg++ | newlib | xiberty
+TARGET_LIBS = chillrt | libio | libstdc++ | librx | libg++ | newlib | xiberty
# end-sanitize-chill
# The first rule in the file had better be this one. Don't put any above it.
# build a target all-X means to cd to X and make all.
# all-glob is handled specially because it doesn't actually build.
#
-# all-gui and all-libproc are handled specially because they are still
-# experimental, and if they fails to build, that shouldn't stop "make
-# all".
-.PHONY: $(ALL_MODULES) all-glob all-gui
+# all-gui, and all-libproc are handled specially because
+# they are still experimental, and if they fail to build, that
+# shouldn't stop "make all".
+.PHONY: $(ALL_MODULES) all-glob all-gui all-libproc
$(ALL_MODULES) all-glob all-gui all-libproc:
@dir=`echo $@ | sed -e 's/all-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
true; \
fi
-# This rule is used to check the modules which use FLAGS_TO_PASS. To
-# build a target check-X means to cd to X and make all.
+# These rules are used to check the modules which use FLAGS_TO_PASS.
+# To build a target check-X means to cd to X and make check. Some
+# modules are only tested in a native toolchain.
-.PHONY: $(CHECK_MODULES) $(HOST_ONLY_CHECK_MODULES) $(CROSS_CHECK_MODULES)
-$(HOST_ONLY_CHECK_MODULES):
- if [ $(host_canonical) = $(target_canonical) ] ; then \
- @dir=`echo $@ | sed -e 's/check-//'`; \
+.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
+$(NATIVE_CHECK_MODULES):
+ @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
# This is a list of inter-dependencies among modules.
all-autoconf: all-m4
all-bfd:
-all-binutils: all-libiberty all-opcodes all-bfd all-flex
+all-binutils: all-libiberty all-opcodes all-bfd all-flex all-byacc
all-byacc:
# start-sanitize-chill
all-chillrt: all-binutils all-gas all-gcc all-newlib
# end-sanitize-chill
all-cvs:
-all-dejagnu:
+all-dejagnu: all-tcl all-expect all-tk
all-diff: all-libiberty
all-emacs:
+all-emacs19: all-byacc
all-etc:
all-expect: all-tcl all-tk
all-fileutils: all-libiberty
all-gas: all-libiberty all-opcodes all-bfd
all-gash: all-tcl
all-gawk:
-all-gcc: all-libiberty all-byacc all-binutils all-gas all-pagas
-all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc all-sim
+all-gcc: all-libiberty all-byacc all-binutils all-gas
+all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc all-sim all-gcc all-ld
all-glob:
all-gprof: all-libiberty all-bfd
all-grep: all-libiberty
-all-gui: all-gdb all-libproc
+all-gui: all-gdb all-libproc all-librx
all-gzip: all-libiberty
all-hello: all-libiberty
all-indent:
-all-ispell: all-emacs
+all-ispell: all-emacs19
all-ld: all-libiberty all-bfd all-byacc all-flex
-all-libg++: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib all-libio
-all-libio: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib
+all-libg++: all-gas all-ld all-gcc all-xiberty all-newlib all-libio all-librx
+all-libio: all-gas all-ld all-gcc all-xiberty all-newlib
all-libiberty:
+all-libstdc++: all-gas all-ld all-gcc all-xiberty all-newlib all-libio
all-m4: all-libiberty
all-make: all-libiberty
all-mmalloc:
-all-newlib: all-binutils all-gas all-pagas all-gcc
+all-newlib: all-binutils all-gas all-gcc
all-opcodes: all-bfd
all-patch:
all-prms: all-libiberty
all-time:
all-wdiff:
all-uudecode: all-libiberty
-all-xiberty: all-gcc all-newlib
+all-xiberty: all-gcc all-ld all-newlib
### other supporting targets
# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
configure.texi standards.texi make-stds.texi
-
-GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline glob sim
-GDB_SUPPORT_FILES= $(GDB_SUPPORT_DIRS)
-
-.PHONY: setup-dirs-gdb gdb.tar.gz make-gdb.tar.gz
-setup-dirs-gdb:
- $(start-sanitize-Sanitize)
- @if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ;
- $(end-sanitize-Sanitize)
- ./configure sun4
- $(MAKE) clean
- ./configure -rm sun4
- chmod og=u `find etc $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) -print`
-
-gdb.tar.gz: setup-dirs-gdb
- (cd gdb; $(MAKE) -f Makefile.in make-proto-gdb.dir BISON="byacc")
- (cd gdb; $(MAKE) -f Makefile.in make-proto-testsuite.dir)
- $(MAKE) $(MFLAGS) -f Makefile.in make-gdb.tar.gz
-
-make-gdb.tar.gz: $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS) gdb texinfo/texinfo.tex
- rm -rf proto-toplev; mkdir proto-toplev
- ln -s ../gdb/proto-gdb.dir proto-toplev/gdb
- (cd proto-toplev; for i in $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS); do \
- ln -s ../$$i . ; \
- done)
- mkdir proto-toplev/etc
- (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \
- ln -s ../../etc/$$i . ; \
- done)
- # Put only one copy (four hard links) of COPYING in the tar file.
- rm proto-toplev/bfd/COPYING
- ln proto-toplev/gdb/COPYING proto-toplev/bfd/COPYING
- rm proto-toplev/include/COPYING
- ln proto-toplev/gdb/COPYING proto-toplev/include/COPYING
- rm proto-toplev/readline/COPYING
- ln proto-toplev/gdb/COPYING proto-toplev/readline/COPYING
-
- # Change the bug reporting address in configure to bug-gdb
- rm proto-toplev/configure
- sed -e 's/configure@cygnus.com/bug-gdb@prep.ai.mit.edu/' \
- <configure >proto-toplev/configure
- chmod a+x proto-toplev/configure
-
- # Take out texinfo and glob from configurable dirs
- rm proto-toplev/configure.in
- sed -e '/^host_tools=/s/texinfo //' \
- -e '/^host_libs=/s/glob //' \
- <configure.in >proto-toplev/configure.in
-
- # Take out texinfo from a few places; make simple BISON=bison line.
- rm proto-toplev/Makefile.in
- sed -e '/^all\.normal: /s/\all-texinfo //' \
- -e '/^ install-texinfo /d' \
- -e '/^BISON = /,/^$$/d' \
- -e '/^# BISON:/s/.*/BISON = bison -y/' \
- <Makefile.in >proto-toplev/Makefile.in
-
- mkdir proto-toplev/texinfo
- ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
- ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
- ln -s ../../texinfo/tex3patch proto-toplev/texinfo/
- chmod og=u `find proto-toplev -print`
- (VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
- echo "==> Making gdb-$$VER.tar.gz"; \
- rm -f gdb-$$VER; ln -s proto-toplev gdb-$$VER; \
- tar cfh - gdb-$$VER \
- | $(GZIPPROG) -v -9 >gdb-$$VER.tar.gz)
-
- # Make the testsuite archive separately.
- ln -s ../../gdb/proto-testsuite.dir/testsuite proto-toplev/gdb/testsuite
- # Blow away the Chill test that requires a Chill compiled executable,
- # since GNU Chill is not yet publically available.
- rm -rf proto-toplev/gdb/testsuite/gdb.t31
-
- # Put a copy of COPYING in the tar file.
- ln proto-toplev/gdb/COPYING proto-toplev/gdb/testsuite/COPYING
- chmod og=u `find proto-toplev/gdb/testsuite -print`
- (VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
- echo "==> Making gdb-$$VER-testsuite.tar.gz"; \
- tar cfh - gdb-$$VER/configure gdb-$$VER/config.guess \
- gdb-$$VER/config.sub gdb-$$VER/move-if-change \
- gdb-$$VER/gdb/testsuite \
- | $(GZIPPROG) -v -9 >gdb-$$VER-testsuite.tar.gz)
+ETC_SUPPORT_PFX=configure.info standards.info cfg-paper.info
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question
# Directories that might want `make diststuff' run.
-DISTSTUFFDIRS= ld gprof gdb libg++ binutils gnats
+DISTSTUFFDIRS= ld gprof gdb libg++ binutils gnats gas
# Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
DISTBISONFILES= binutils/Makefile.in gas/Makefile.in gdb/Makefile.in
# Directories where "info" should be built.
-DISTDOCDIRS= ld gprof binutils gas bfd libg++ libio gdb gnats send-pr
+DISTDOCDIRS= ld gprof binutils gas bfd libg++ libio gdb gnats send-pr etc
.PHONY: taz
<Makefile.in >tmp
mv -f tmp Makefile.in
#
+ $(start-sanitize-Sanitize)
+ @if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ;
+ $(end-sanitize-Sanitize)
./configure sun4
# Doc files don't change; include them in distribution.
for f in $(DISTDOCDIRS) ; do \
$(MAKE) distclean
#
mkdir proto-toplev/etc
- (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \
+ (cd proto-toplev/etc; \
+ for i in $(ETC_SUPPORT); do \
ln -s ../../etc/$$i . ; \
- done)
+ done ; \
+ for i in $(ETC_SUPPORT_PFX); do \
+ ln -s ../../etc/$$i* . ; \
+ done)
#
# Take out texinfo and glob from configurable dirs
rm proto-toplev/configure.in
# The FSF "binutils" release includes gprof and ld.
.PHONY: binutils.tar.gz
-BINUTILS_SUPPORT_DIRS= bfd include libiberty opcodes ld gprof
+BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof
binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
$(MAKE) -f Makefile.in taz TOOL=binutils \
- SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
+ SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
.PHONY: gas+binutils.tar.gz
GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz TOOL=gas \
- SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
+ SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
.PHONY: libg++.tar.gz
-LIBGXX_SUPPORT_DIRS=include libio libiberty xiberty
+LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty xiberty
libg++.tar.gz: $(DIST_SUPPORT) libg++
$(MAKE) -f Makefile.in taz TOOL=libg++ \
SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
$(MAKE) -f Makefile.in taz TOOL=gnats \
SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
+.PHONY: gdb.tar.gz
+GDB_SUPPORT_DIRS= bfd glob include libiberty mmalloc opcodes readline sim
+gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in taz TOOL=gdb \
+ SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
+
+.PHONY: newlib.tar.gz
+NEWLIB_SUPPORT_DIRS=
+newlib.tar.gz: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
+ $(MAKE) -f Makefile.in taz TOOL=newlib \
+ SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
+ DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" \
+ DISTDOCDIRS="$(DISTDOCDIRS) newlib"
+
.NOEXPORT:
MAKEOVERRIDES=
projects / deliverable / binutils-gdb.git / blobdiff