NOTPARALLEL = .NOTPARALLEL
$(NOTPARALLEL):
+VPATH=@srcdir@
+links=@configlinks@
+
+build_alias=@build_alias@
+build_cpu=@build_cpu@
+build_vendor=@build_vendor@
+build_os=@build_os@
+build_canonical=@build_cpu@-@build_vendor@-@build_os@
+host_alias=@host_alias@
+host_cpu=@host_cpu@
+host_vendor=@host_vendor@
+host_os=@host_os@
+host_canonical=@host_cpu@-@host_vendor@-@host_os@
+target_alias=@target_alias@
+target_cpu=@target_cpu@
+target_vendor=@target_vendor@
+target_os=@target_os@
+target_canonical=@target_cpu@-@target_vendor@-@target_os@
+
+enable_shared = @enable_shared@
+enable_threads = @enable_threads@
+enable_version_specific_runtime_libs = @enable_version_specific_runtime_libs@
+# The file containing GCC's version number.
+gcc_version_trigger = @gcc_version_trigger@
+gcc_version = @gcc_version@
+
srcdir = @srcdir@
prefix = @prefix@
INSTALL_DOSREL = install-dosrel-fake
-AS = as
-AR = ar
+AS = @AS@
+AR = @AR@
AR_FLAGS = rc
CC = cc
# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
# here so that they can be overridden by Makefile fragments.
HOST_CC = $(CC_FOR_BUILD)
-BUILD_PREFIX =
-BUILD_PREFIX_1 = loser-
+BUILD_PREFIX = @BUILD_PREFIX@
+BUILD_PREFIX_1 = @BUILD_PREFIX_1@
# These flag values are normally overridden by the configure script.
CFLAGS = -g
CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
-DLLTOOL = dlltool
-WINDRES = windres
+DLLTOOL = @DLLTOOL@
+WINDRES = @WINDRES@
-NM = nm
+NM = @NM@
-LD = ld
+LD = @LD@
# These values are substituted by configure.
DEFAULT_YACC = @DEFAULT_YACC@
DEFAULT_LEX = @DEFAULT_LEX@
DEFAULT_M4 = @DEFAULT_M4@
-BISON = `if [ -f $$r/bison/bison ] ; then \
+BISON=@BISON@
+USUAL_BISON = `if [ -f $$r/bison/bison ] ; then \
echo $$r/bison/bison -L $$s/bison/ ; \
else \
echo bison ; \
fi`
-YACC = `if [ -f $$r/bison/bison ] ; then \
+YACC=@YACC@
+USUAL_YACC = `if [ -f $$r/bison/bison ] ; then \
echo $$r/bison/bison -y -L $$s/bison/ ; \
elif [ -f $$r/byacc/byacc ] ; then \
echo $$r/byacc/byacc ; \
echo ${DEFAULT_YACC} ; \
fi`
-LEX = `if [ -f $$r/flex/flex ] ; \
+LEX=@LEX@
+USUAL_LEX = `if [ -f $$r/flex/flex ] ; \
then echo $$r/flex/flex ; \
else echo ${DEFAULT_LEX} ; fi`
# For an installed makeinfo, we require it to be from texinfo 4 or
# higher, else we use the "missing" dummy.
-MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
+MAKEINFO=@MAKEINFO@
+USUAL_MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
then echo $$r/texinfo/makeinfo/makeinfo ; \
else if (makeinfo --version \
| egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \
# compilers to use to create programs which must be run in the build
# environment.
-CC_FOR_BUILD = $(CC)
+CC_FOR_BUILD = @CC_FOR_BUILD@
CXX_FOR_BUILD = $(CXX)
SUBDIRS = @configdirs@
# This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
# was used.
-SET_LIB_PATH =
+SET_LIB_PATH = @SET_LIB_PATH@
# This is the name of the environment variable used for the path to
# the libraries. This may be changed by configure.in.
-RPATH_ENVVAR = LD_LIBRARY_PATH
+RPATH_ENVVAR = @RPATH_ENVVAR@
# This is the list of directories that may be needed in RPATH_ENVVAR
# so that programs built for the host machine work.
# variable is passed down to the gcc Makefile, where it is used to
# build libgcc2.a. We define it here so that it can itself be
# overridden on the command line.
-GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
+GCC_FOR_TARGET=@GCC_FOR_TARGET@
+USUAL_GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
-AS_FOR_TARGET = ` \
+AS_FOR_TARGET=@AS_FOR_TARGET@
+USUAL_AS_FOR_TARGET = ` \
if [ -f $$r/gas/as-new ] ; then \
echo $$r/gas/as-new ; \
elif [ -f $$r/gcc/xgcc ]; then \
fi; \
fi`
-LD_FOR_TARGET = ` \
+LD_FOR_TARGET=@LD_FOR_TARGET@
+USUAL_LD_FOR_TARGET = ` \
if [ -f $$r/ld/ld-new ] ; then \
echo $$r/ld/ld-new ; \
elif [ -f $$r/gcc/xgcc ]; then \
fi; \
fi`
-DLLTOOL_FOR_TARGET = ` \
+DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@
+USUAL_DLLTOOL_FOR_TARGET = ` \
if [ -f $$r/binutils/dlltool ] ; then \
echo $$r/binutils/dlltool ; \
else \
fi; \
fi`
-WINDRES_FOR_TARGET = ` \
+WINDRES_FOR_TARGET=@WINDRES_FOR_TARGET@
+USUAL_WINDRES_FOR_TARGET = ` \
if [ -f $$r/binutils/windres ] ; then \
echo $$r/binutils/windres ; \
else \
fi; \
fi`
-AR_FOR_TARGET = ` \
+AR_FOR_TARGET=@AR_FOR_TARGET@
+USUAL_AR_FOR_TARGET = ` \
if [ -f $$r/binutils/ar ] ; then \
echo $$r/binutils/ar ; \
else \
fi; \
fi`
-RANLIB_FOR_TARGET = ` \
+RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@
+USUAL_RANLIB_FOR_TARGET = ` \
if [ -f $$r/binutils/ranlib ] ; then \
echo $$r/binutils/ranlib ; \
else \
fi; \
fi`
-NM_FOR_TARGET = ` \
+NM_FOR_TARGET=@NM_FOR_TARGET@
+USUAL_NM_FOR_TARGET = ` \
if [ -f $$r/binutils/nm-new ] ; then \
echo $$r/binutils/nm-new ; \
elif [ -f $$r/gcc/xgcc ]; then \
all-guile \
all-tclX \
all-tk \
- all-tix
+ all-tix
# This is a list of the check targets for all of the modules which are
# compiled using $(X11_FLAGS_TO_PASS).
CHECK_X11_MODULES = \
check-gdb \
- check-guile \
check-expect \
+ check-guile \
check-tclX \
check-tk \
- check-tix
+ check-tix
# This is a list of the install targets for all the modules which are
# compiled using $(X11_FLAGS_TO_PASS).
INSTALL_X11_MODULES = \
install-gdb \
- install-guile \
install-expect \
+ install-guile \
install-tclX \
install-tk \
- install-tix
+ install-tix
# This is a list of the targets for all of the modules which are compiled
# using $(TARGET_FLAGS_TO_PASS).
all-target-libjava \
all-target-zlib \
all-target-boehm-gc \
- all-target-qthreads
+ all-target-qthreads \
+ all-target-rda
# This is a list of the configure targets for all of the modules which
# are compiled using the target tools.
configure-target-libjava \
configure-target-zlib \
configure-target-boehm-gc \
- configure-target-qthreads
+ configure-target-qthreads \
+ configure-target-rda
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
check-target-libjava \
check-target-zlib \
check-target-boehm-gc \
- check-target-qthreads
+ check-target-qthreads \
+ check-target-rda
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
install-target-libjava \
install-target-zlib \
install-target-boehm-gc \
- install-target-qthreads
+ install-target-qthreads \
+ install-target-rda
# This is a list of the targets for which we can do a clean-{target}.
CLEAN_MODULES = \
clean-target-libjava \
clean-target-zlib \
clean-target-boehm-gc \
- clean-target-qthreads
+ clean-target-qthreads \
+ clean-target-rda
# All of the x11 modules that can be cleaned
CLEAN_X11_MODULES = \
clean-guile \
clean-tclX \
clean-tk \
- clean-tix
+ clean-tix
# The target built for a native build.
.PHONY: all.normal
# In theory, on an SMP all those dependencies can be resolved
# in parallel.
#
-.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean
-bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean: all-bootstrap
+.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap
+bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap: all-bootstrap
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
all-target-zlib: configure-target-zlib
all-target-boehm-gc: configure-target-boehm-gc
all-target-qthreads: configure-target-qthreads
+all-target-rda: configure-target-rda
### other supporting targets
# with the gnu make, this is done automatically.
+host_makefile_frag=@host_makefile_frag@
+target_makefile_frag=@target_makefile_frag@
+
Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag) $(gcc_version_trigger)
$(SHELL) ./config.status