NOTPARALLEL = .NOTPARALLEL
$(NOTPARALLEL):
+VPATH=@srcdir@
+links=@configlinks@
+
+build_alias=@build_alias@
+build_cpu=@build_cpu@
+build_vendor=@build_vendor@
+build_os=@build_os@
+build_canonical=@build_cpu@-@build_vendor@-@build_os@
+host_alias=@host_alias@
+host_cpu=@host_cpu@
+host_vendor=@host_vendor@
+host_os=@host_os@
+host_canonical=@host_cpu@-@host_vendor@-@host_os@
+target_alias=@target_alias@
+target_cpu=@target_cpu@
+target_vendor=@target_vendor@
+target_os=@target_os@
+target_canonical=@target_cpu@-@target_vendor@-@target_os@
+
+enable_shared = @enable_shared@
+enable_threads = @enable_threads@
+enable_version_specific_runtime_libs = @enable_version_specific_runtime_libs@
+# The file containing GCC's version number.
+gcc_version_trigger = @gcc_version_trigger@
+gcc_version = @gcc_version@
+
srcdir = @srcdir@
prefix = @prefix@
INSTALL_DOSREL = install-dosrel-fake
-AS = as
-AR = ar
+AS = @AS@
+AR = @AR@
AR_FLAGS = rc
CC = cc
# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
# here so that they can be overridden by Makefile fragments.
HOST_CC = $(CC_FOR_BUILD)
-BUILD_PREFIX =
-BUILD_PREFIX_1 = loser-
+BUILD_PREFIX = @BUILD_PREFIX@
+BUILD_PREFIX_1 = @BUILD_PREFIX_1@
# These flag values are normally overridden by the configure script.
CFLAGS = -g
CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
-DLLTOOL = dlltool
-WINDRES = windres
-
-NM = nm
+DLLTOOL = @DLLTOOL@
+WINDRES = @WINDRES@
-LD = ld
+NM = @NM@
-BZIPPROG = bzip2
-MD5PROG = md5sum
+LD = @LD@
# These values are substituted by configure.
DEFAULT_YACC = @DEFAULT_YACC@
DEFAULT_LEX = @DEFAULT_LEX@
DEFAULT_M4 = @DEFAULT_M4@
-BISON = `if [ -f $$r/bison/bison ] ; then \
+BISON=@BISON@
+USUAL_BISON = `if [ -f $$r/bison/bison ] ; then \
echo $$r/bison/bison -L $$s/bison/ ; \
else \
echo bison ; \
fi`
-YACC = `if [ -f $$r/bison/bison ] ; then \
+YACC=@YACC@
+USUAL_YACC = `if [ -f $$r/bison/bison ] ; then \
echo $$r/bison/bison -y -L $$s/bison/ ; \
elif [ -f $$r/byacc/byacc ] ; then \
echo $$r/byacc/byacc ; \
echo ${DEFAULT_YACC} ; \
fi`
-LEX = `if [ -f $$r/flex/flex ] ; \
+LEX=@LEX@
+USUAL_LEX = `if [ -f $$r/flex/flex ] ; \
then echo $$r/flex/flex ; \
else echo ${DEFAULT_LEX} ; fi`
# For an installed makeinfo, we require it to be from texinfo 4 or
# higher, else we use the "missing" dummy.
-MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
+MAKEINFO=@MAKEINFO@
+USUAL_MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
then echo $$r/texinfo/makeinfo/makeinfo ; \
else if (makeinfo --version \
| egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \
# compilers to use to create programs which must be run in the build
# environment.
-CC_FOR_BUILD = $(CC)
+CC_FOR_BUILD = @CC_FOR_BUILD@
CXX_FOR_BUILD = $(CXX)
-SUBDIRS = "this is set via configure, don't edit this"
-OTHERS =
+SUBDIRS = @configdirs@
# This is set by the configure script to the list of directories which
# should be built using the target tools.
# This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
# was used.
-SET_LIB_PATH =
+SET_LIB_PATH = @SET_LIB_PATH@
# This is the name of the environment variable used for the path to
# the libraries. This may be changed by configure.in.
-RPATH_ENVVAR = LD_LIBRARY_PATH
+RPATH_ENVVAR = @RPATH_ENVVAR@
# This is the list of directories that may be needed in RPATH_ENVVAR
# so that programs built for the host machine work.
# variable is passed down to the gcc Makefile, where it is used to
# build libgcc2.a. We define it here so that it can itself be
# overridden on the command line.
-GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
+GCC_FOR_TARGET=@GCC_FOR_TARGET@
+USUAL_GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
-AS_FOR_TARGET = ` \
+AS_FOR_TARGET=@AS_FOR_TARGET@
+USUAL_AS_FOR_TARGET = ` \
if [ -f $$r/gas/as-new ] ; then \
echo $$r/gas/as-new ; \
elif [ -f $$r/gcc/xgcc ]; then \
fi; \
fi`
-LD_FOR_TARGET = ` \
+LD_FOR_TARGET=@LD_FOR_TARGET@
+USUAL_LD_FOR_TARGET = ` \
if [ -f $$r/ld/ld-new ] ; then \
echo $$r/ld/ld-new ; \
elif [ -f $$r/gcc/xgcc ]; then \
fi; \
fi`
-DLLTOOL_FOR_TARGET = ` \
+DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@
+USUAL_DLLTOOL_FOR_TARGET = ` \
if [ -f $$r/binutils/dlltool ] ; then \
echo $$r/binutils/dlltool ; \
else \
fi; \
fi`
-WINDRES_FOR_TARGET = ` \
+WINDRES_FOR_TARGET=@WINDRES_FOR_TARGET@
+USUAL_WINDRES_FOR_TARGET = ` \
if [ -f $$r/binutils/windres ] ; then \
echo $$r/binutils/windres ; \
else \
fi; \
fi`
-AR_FOR_TARGET = ` \
+AR_FOR_TARGET=@AR_FOR_TARGET@
+USUAL_AR_FOR_TARGET = ` \
if [ -f $$r/binutils/ar ] ; then \
echo $$r/binutils/ar ; \
else \
fi; \
fi`
-RANLIB_FOR_TARGET = ` \
+RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@
+USUAL_RANLIB_FOR_TARGET = ` \
if [ -f $$r/binutils/ranlib ] ; then \
echo $$r/binutils/ranlib ; \
else \
fi; \
fi`
-NM_FOR_TARGET = ` \
+NM_FOR_TARGET=@NM_FOR_TARGET@
+USUAL_NM_FOR_TARGET = ` \
if [ -f $$r/binutils/nm-new ] ; then \
echo $$r/binutils/nm-new ; \
elif [ -f $$r/gcc/xgcc ]; then \
# This is a list of the install targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
-# We put install-opcodes before install-binutils because the installed
-# binutils might be on PATH, and they might need the shared opcodes
-# library.
-# We put install-tcl before install-itcl because itcl wants to run a
-# program on installation which uses the Tcl libraries.
INSTALL_MODULES = \
install-ash \
install-autoconf \
all-guile \
all-tclX \
all-tk \
- all-tix
+ all-tix
# This is a list of the check targets for all of the modules which are
# compiled using $(X11_FLAGS_TO_PASS).
CHECK_X11_MODULES = \
check-gdb \
- check-guile \
check-expect \
+ check-guile \
check-tclX \
check-tk \
- check-tix
+ check-tix
# This is a list of the install targets for all the modules which are
# compiled using $(X11_FLAGS_TO_PASS).
INSTALL_X11_MODULES = \
install-gdb \
- install-guile \
install-expect \
+ install-guile \
install-tclX \
install-tk \
- install-tix
+ install-tix
# This is a list of the targets for all of the modules which are compiled
# using $(TARGET_FLAGS_TO_PASS).
all-target-libjava \
all-target-zlib \
all-target-boehm-gc \
- all-target-qthreads
+ all-target-qthreads \
+ all-target-rda
# This is a list of the configure targets for all of the modules which
# are compiled using the target tools.
configure-target-libjava \
configure-target-zlib \
configure-target-boehm-gc \
- configure-target-qthreads
+ configure-target-qthreads \
+ configure-target-rda
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
check-target-libjava \
check-target-zlib \
check-target-boehm-gc \
- check-target-qthreads
+ check-target-qthreads \
+ check-target-rda
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
install-target-libjava \
install-target-zlib \
install-target-boehm-gc \
- install-target-qthreads
+ install-target-qthreads \
+ install-target-rda
# This is a list of the targets for which we can do a clean-{target}.
CLEAN_MODULES = \
clean-target-libjava \
clean-target-zlib \
clean-target-boehm-gc \
- clean-target-qthreads
+ clean-target-qthreads \
+ clean-target-rda
# All of the x11 modules that can be cleaned
CLEAN_X11_MODULES = \
clean-guile \
clean-tclX \
clean-tk \
- clean-tix
+ clean-tix
# The target built for a native build.
.PHONY: all.normal
# This rule is used to build the modules which use FLAGS_TO_PASS. To
# build a target all-X means to cd to X and make all.
-#
-# all-gui, and all-libproc are handled specially because
-# they are still experimental, and if they fail to build, that
-# shouldn't stop "make all".
-.PHONY: $(ALL_MODULES) all-gui all-libproc
-$(ALL_MODULES) all-gui all-libproc:
+.PHONY: $(ALL_MODULES)
+$(ALL_MODULES):
@dir=`echo $@ | sed -e 's/all-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
# In theory, on an SMP all those dependencies can be resolved
# in parallel.
#
-.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean
-bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean: all-bootstrap
+.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap
+bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap: all-bootstrap
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
all-target-gperf: all-target-libiberty all-target-libstdc++-v3
all-gprof: all-libiberty all-bfd all-opcodes all-intl
all-grep: all-libiberty
-all-gui: all-gdb all-libproc
all-guile:
all-gzip: all-libiberty
all-hello: all-libiberty
configure-target-fastjar: configure-target-zlib
all-target-fastjar: configure-target-fastjar all-target-zlib all-target-libiberty
configure-target-libiberty: $(ALL_GCC_C)
+configure-target: $(CONFIGURE_TARGET_MODULES)
all-target: $(ALL_TARGET_MODULES)
install-target: $(INSTALL_TARGET_MODULES)
install-gdb: install-tcl install-tk install-itcl install-tix install-libgui
install-sid: install-tcl install-tk
+# We put install-opcodes before install-binutils because the installed
+# binutils might be on PATH, and they might need the shared opcodes
+# library.
+install-binutils: install-opcodes
+
+# We put install-tcl before install-itcl because itcl wants to run a
+# program on installation which uses the Tcl libraries.
+install-itcl: install-tcl
+
+
# Dependencies of all-target-foo on configure-target-foo.
all-target-libstdc++-v3: configure-target-libstdc++-v3
all-target-newlib: configure-target-newlib
all-target-zlib: configure-target-zlib
all-target-boehm-gc: configure-target-boehm-gc
all-target-qthreads: configure-target-qthreads
+all-target-rda: configure-target-rda
### other supporting targets
# with the gnu make, this is done automatically.
+host_makefile_frag=@host_makefile_frag@
+target_makefile_frag=@target_makefile_frag@
+
Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag) $(gcc_version_trigger)
$(SHELL) ./config.status
#
-# Support for building net releases
-
-# Files in devo used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
-DEVO_SUPPORT= README Makefile.in configure configure.in \
- config.guess config.if config.sub config move-if-change \
- mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
- COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
- mkinstalldirs ltconfig ltmain.sh missing ylwrap \
- libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh
-
-# Files in devo/etc used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
-ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
- make-stds.texi standards.info* configure.texi configure.info* \
- configbuild.* configdev.*
-
-
-# When you use `make setup-dirs' or `make taz' you should always redefine
-# this macro.
-SUPPORT_FILES = list-of-support-files-for-tool-in-question
-
-# NOTE: No double quotes in the below. It is used within shell script
-# as VER="$(VER)"
-VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
- sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
- elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
- sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
- elif test -f $(TOOL)/version.in; then \
- head -1 $(TOOL)/version.in; \
- elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
- sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
- else \
- echo VERSION; \
- fi`
-PACKAGE = $(TOOL)
-
-.PHONY: taz
-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- $(MAKE) -f Makefile.in do-proto-toplev \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-md5sum \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-tar \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-bz2 \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: gdb-tar
-gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- $(MAKE) -f Makefile.in do-proto-toplev \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-md5sum \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-djunpack \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-tar \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: gdb-taz
-gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- $(MAKE) -f Makefile.in gdb-tar \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-bz2 \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: do-proto-toplev
-do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- echo "==> Making $(PACKAGE)-$(VER)/"
- # Take out texinfo from a few places.
- sed -e '/^all\.normal: /s/\all-texinfo //' \
- -e '/^ install-texinfo /d' \
- <Makefile.in >tmp
- mv -f tmp Makefile.in
- #
- ./configure sun4
- [ -z "$(CONFIGURE_TARGET_MODULES)" ] \
- || $(MAKE) $(CONFIGURE_TARGET_MODULES) \
- ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
- CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
- # Make links, and run "make diststuff" or "make info" when needed.
- rm -rf proto-toplev ; mkdir proto-toplev
- set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
- for d in $$dirs ; do \
- if [ -d $$d ]; then \
- if [ ! -f $$d/Makefile ] ; then true ; \
- elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
- (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
- elif grep '^info:' $$d/Makefile >/dev/null ; then \
- (cd $$d ; $(MAKE) info ) || exit 1 ; \
- fi ; \
- if [ -d $$d/proto-$$d.dir ]; then \
- ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
- else \
- ln -s ../$$d proto-toplev/$$d ; \
- fi ; \
- else ln -s ../$$d proto-toplev/$$d ; fi ; \
- done
- cd etc && $(MAKE) info
- $(MAKE) distclean
- #
- mkdir proto-toplev/etc
- (cd proto-toplev/etc; \
- for i in $(ETC_SUPPORT); do \
- ln -s ../../etc/$$i . ; \
- done)
- #
- # Take out texinfo from configurable dirs
- rm proto-toplev/configure.in
- sed -e '/^host_tools=/s/texinfo //' \
- <configure.in >proto-toplev/configure.in
- #
- mkdir proto-toplev/texinfo
- ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
- if test -r texinfo/util/tex3patch ; then \
- mkdir proto-toplev/texinfo/util && \
- ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
- else true; fi
- chmod -R og=u . || chmod og=u `find . -print`
- #
- # Create .gmo files from .po files.
- for f in `find . -name '*.po' -type f -print`; do \
- msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
- done
- #
- -rm -f $(PACKAGE)-$(VER)
- ln -s proto-toplev $(PACKAGE)-$(VER)
-
-.PHONY: do-tar
-do-tar:
- echo "==> Making $(PACKAGE)-$(VER).tar"
- -rm -f $(PACKAGE)-$(VER).tar
- find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
- | tar cTfh - $(PACKAGE)-$(VER).tar
-
-.PHONY: do-bz2
-do-bz2:
- echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
- -rm -f $(PACKAGE)-$(VER).tar.bz2
- $(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
-
-.PHONY: do-md5sum
-do-md5sum:
- echo "==> Adding md5 checksum to top-level directory"
- cd proto-toplev && find * -follow -name CVS -prune -o -type f -print \
- | xargs $(MD5PROG) > ../md5.sum
- mv md5.sum proto-toplev
-
-.PHONY: do-djunpack
-do-djunpack:
- echo "==> Adding updated djunpack.bat to top-level directory"
- echo - 's /gdb-[0-9\.]*/gdb-'"$(VER)"'/'
- sed < djunpack.bat > djunpack.new \
- -e 's/gdb-[0-9][0-9\.]*/gdb-'"$(VER)"'/'
- mv djunpack.new djunpack.bat
- -rm -f proto-toplev/djunpack.bat
- ln -s ../djunpack.bat proto-toplev/djunpack.bat
-
-TEXINFO_SUPPORT= texinfo/texinfo.tex
-DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
-
-.PHONY: gas.tar.bz2
-GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
-gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
- $(MAKE) -f Makefile.in taz TOOL=gas \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
-
-# The FSF "binutils" release includes gprof and ld.
-.PHONY: binutils.tar.bz2
-BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep
-binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
- $(MAKE) -f Makefile.in taz TOOL=binutils \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
-
-.PHONY: gas+binutils.tar.bz2
-GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
-gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
- $(MAKE) -f Makefile.in taz TOOL=gas \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
-
-GNATS_SUPPORT_DIRS=include libiberty send-pr
-gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
- $(MAKE) -f Makefile.in taz TOOL=gnats \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
-
-.PHONY: gdb.tar.bz2
-GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl
-gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
-.PHONY: gdb.tar
-gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
-
-DEJAGNU_SUPPORT_DIRS= tcl expect libiberty
-.PHONY: dejagnu.tar.bz2
-dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
- $(MAKE) -f Makefile.in taz TOOL=dejagnu \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"
-
-.PHONY: gdb+dejagnu.tar.bz2
-GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu
-gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
-.PHONY: gdb+dejagnu.tar
-gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
-
-.PHONY: insight.tar.bz2
-INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
-insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
-.PHONY: insight.tar
-insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
-
-.PHONY: insight+dejagnu.tar.bz2
-INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
-insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
-.PHONY: insight+dejagnu.tar
-insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
-
-.PHONY: newlib.tar.bz2
-NEWLIB_SUPPORT_DIRS=libgloss
-# taz configures for the sun4 target which won't configure newlib.
-# We need newlib configured so that the .info files are made.
-# Unfortunately, it is not enough to just configure newlib separately:
-# taz will build the .info files but since SUBDIRS won't contain newlib,
-# distclean won't be run (leaving Makefile, config.status, and the tmp files
-# used in building the .info files, eg: *.def, *.ref).
-# The problem isn't solvable however without a lot of extra work because
-# target libraries are built in subdir $(target_alias) which gets nuked during
-# the make distclean. For now punt on the issue of shipping newlib info files
-# with newlib net releases and wait for a day when some native target (sun4?)
-# supports newlib (if only minimally).
-newlib.tar.bz2: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
- $(MAKE) -f Makefile.in taz TOOL=newlib \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
- DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
.NOEXPORT:
MAKEOVERRIDES=