NM = nm
MUNCH_NM = $(NM)
GZIP = gzip
-COMPRESS = compress
# BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
BISON = `if [ -f $${rootme}/byacc/byacc ] ; \
"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
"CXXFLAGS=$(CXXFLAGS)" \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
- "GCC_FOR_TARGET=$$(CC_FOR_TARGET)" \
+ "GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_XFORM=$(INSTALL_XFORM)" \
"LDFLAGS=$(LDFLAGS)" \
"LEX=$(LEX)" \
- "LOADLIBES=$(LOADLIBES)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
"MUNCH_NM=$(MUNCH_NM)" \
"NM_FOR_TARGET=$(NM_FOR_TARGET)" \
all-cvs \
all-dejagnu \
all-diff \
+ all-dosutils \
all-etc \
all-fileutils \
all-find \
$(start-sanitize-chill) \
all-chillrt \
$(end-sanitize-chill) \
+ all-libio \
all-libg++ \
all-newlib \
all-xiberty
$(start-sanitize-chill) \
check-chillrt \
$(end-sanitize-chill) \
+ check-libio \
check-libg++ \
check-newlib \
check-xiberty
$(start-sanitize-chill) \
install-chillrt \
$(end-sanitize-chill) \
+ install-libio \
install-libg++ \
install-newlib \
install-xiberty
# This is a shell case of all modules which are compiled using
# $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
-TARGET_LIBS = libg++ | newlib | xiberty
+TARGET_LIBS = libio | libg++ | newlib | xiberty
# start-sanitize-chill
-TARGET_LIBS = chillrt | libg++ | newlib | xiberty
+TARGET_LIBS = chillrt | libio | libg++ | newlib | xiberty
# end-sanitize-chill
# The first rule in the file had better be this one. Don't put any above it.
all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc all-sim
all-glob:
all-gprof: all-libiberty all-bfd
-all-grep:
+all-grep: all-libiberty
all-gzip: all-libiberty
all-hello: all-libiberty
all-indent:
all-ispell: all-emacs
all-ld: all-libiberty all-bfd all-byacc all-flex
-all-libg++: all-gas all-ld all-gcc all-xiberty all-newlib
+all-libg++: all-gas all-ld all-gcc all-xiberty all-newlib all-libio
all-libiberty:
all-m4: all-libiberty
all-make: all-libiberty
all-newlib: all-binutils all-gas all-gcc
all-opcodes: all-bfd
all-patch:
-all-prms:
+all-prms: all-libiberty
all-rcs:
all-readline:
all-recode: all-libiberty
-all-sed:
-all-send-pr:
+all-sed: all-libiberty
+all-send-pr: all-prms
all-shellutils:
all-sim: all-libiberty all-bfd
all-tar: all-libiberty
install-dirs:
@for i in $(MAKEDIRS) ; do \
echo Making $$i... ; \
- parent=`echo $$i|sed -e 's@/[^/]*$$@@'`; \
+ parent=`echo $$i | sed -e 's@/[^/]*$$@@' | sed -e 's@^$$@/@'`; \
if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi ; \
if [ ! -d $$i ] ; then \
if mkdir $$i ; then \
# with the gnu make, this is done automatically.
-Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
+Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag)
$(SHELL) ./config.status
#
-# Build GDB distributions that contain BFD, Include, Libiberty, Readline, etc
+# Support for building net releases
+# Files in devo used in any net release.
+# ChangeLog omitted because it may refer to files which are not in this
+# distribution (perhaps it would be better to include it anyway).
DEVO_SUPPORT= README Makefile.in configure configure.in \
config.guess config.sub config move-if-change \
COPYING COPYING.LIB install.sh
+
+# Files in devo/etc used in any net release.
+# ChangeLog omitted because it may refer to files which are not in this
+# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
configure.texi standards.texi make-stds.texi
+
GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline glob sim
GDB_SUPPORT_FILES= $(GDB_SUPPORT_DIRS)
-.PHONY: setup-dirs-gdb gdb.tar.Z make-gdb.tar.Z
+.PHONY: setup-dirs-gdb gdb.tar.gz make-gdb.tar.gz
setup-dirs-gdb:
./configure sun4
$(MAKE) clean
./configure -rm sun4
chmod og=u `find etc $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) -print`
-gdb.tar.Z: setup-dirs-gdb
+gdb.tar.gz: setup-dirs-gdb
(cd gdb; $(MAKE) -f Makefile.in make-proto-gdb.dir BISON="byacc")
(cd gdb; $(MAKE) -f Makefile.in make-proto-testsuite.dir)
- $(MAKE) $(MFLAGS) -f Makefile.in make-gdb.tar.Z
+ $(MAKE) $(MFLAGS) -f Makefile.in make-gdb.tar.gz
-make-gdb.tar.Z: $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS) gdb texinfo/texinfo.tex
+make-gdb.tar.gz: $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS) gdb texinfo/texinfo.tex
rm -rf proto-toplev; mkdir proto-toplev
ln -s ../gdb/proto-gdb.dir proto-toplev/gdb
(cd proto-toplev; for i in $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS); do \
rm proto-toplev/readline/COPYING
ln proto-toplev/gdb/COPYING proto-toplev/readline/COPYING
+ # Change the bug reporting address in configure to bug-gdb
+ rm proto-toplev/configure
+ sed -e 's/configure@cygnus.com/bug-gdb@prep.ai.mit.edu/' \
+ <configure >proto-toplev/configure
+ chmod a+x proto-toplev/configure
+
# Take out texinfo and glob from configurable dirs
rm proto-toplev/configure.in
sed -e '/^host_tools=/s/texinfo //' \
mkdir proto-toplev/texinfo
ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
+ ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
ln -s ../../texinfo/tex3patch proto-toplev/texinfo/
chmod og=u `find proto-toplev -print`
(VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
- ln -s proto-toplev gdb-$$VER; \
- echo "==> Making gdb-$$VER.tar.Z"; \
- tar cfh - gdb-$$VER | $(COMPRESS) -v >gdb-$$VER.tar.Z; \
echo "==> Making gdb-$$VER.tar.gz"; \
- tar cfh - gdb-$$VER | $(GZIP) -v -9 >gdb-$$VER.tar.gz)
+ rm -f gdb-$$VER; ln -s proto-toplev gdb-$$VER; \
+ tar cfh - gdb-$$VER \
+ | $(GZIP) -v -9 >gdb-$$VER.tar.gz)
# Make the testsuite archive separately.
ln -s ../../gdb/proto-testsuite.dir/testsuite proto-toplev/gdb/testsuite
ln proto-toplev/gdb/COPYING proto-toplev/gdb/testsuite/COPYING
chmod og=u `find proto-toplev/gdb/testsuite -print`
(VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
- echo "==> Making gdb-$$VER-testsuite.tar.Z"; \
- tar cfh - gdb-$$VER/configure gdb-$$VER/config.guess \
- gdb-$$VER/config.sub gdb-$$VER/move-if-change \
- gdb-$$VER/gdb/testsuite | \
- $(COMPRESS) -v >gdb-$$VER-testsuite.tar.Z; \
echo "==> Making gdb-$$VER-testsuite.tar.gz"; \
tar cfh - gdb-$$VER/configure gdb-$$VER/config.guess \
gdb-$$VER/config.sub gdb-$$VER/move-if-change \
- gdb-$$VER/gdb/testsuite | \
- $(GZIP) -v -9 >gdb-$$VER-testsuite.tar.gz)
+ gdb-$$VER/gdb/testsuite \
+ | $(GZIP) -v -9 >gdb-$$VER-testsuite.tar.gz)
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
projects / deliverable / binutils-gdb.git / blobdiff