#
# Makefile for directory with subdirs to build.
-# Copyright (C) 1990, 1991, 1992 Free Software Foundation
+# Copyright (C) 1990, 91, 92, 93, 94, 95, 96, 1997 Free Software Foundation
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
srcdir = .
exec_prefix = $(prefix)
bindir = $(exec_prefix)/bin
libdir = $(exec_prefix)/lib
+tooldir = $(exec_prefix)/$(target)
-datadir = $(prefix)/lib
+program_transform_name =
+
+datadir = $(prefix)/share
mandir = $(prefix)/man
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man9dir = $(mandir)/man9
infodir = $(prefix)/info
includedir = $(prefix)/include
-docdir = $(datadir)/doc
+GDB_NLM_DEPS =
SHELL = /bin/sh
-INSTALL = install -c
+INSTALL = $(SHELL) $$s/install-sh -c
INSTALL_PROGRAM = $(INSTALL)
-INSTALL_DATA = $(INSTALL)
-
-AR = ar
-AR_FLAGS = qc
-RANLIB = ranlib
-
-BISON = `if [ -d $${rootme}/bison ] ; \
- then echo $${rootme}/bison/bison -L $${rootme}/bison/ -y ; \
- else echo bison -y ; fi`
+INSTALL_DATA = $(INSTALL) -m 644
-MAKEINFO = `if [ -d $${rootme}/texinfo/C ] ; \
- then echo $${rootme}/texinfo/C/makeinfo ; \
- else echo makeinfo ; fi`
-
-SUBDIRS = libiberty glob readline bfd gdb binutils ld gas gcc libg++ libgcc clib newlib
-OTHERS =
-
-ALL = all.normal
-INSTALL_TARGET = install.all
+INSTALL_DOSREL = install-dosrel-fake
-### for debugging
-#GCCVERBOSE=-v
-
-
-#### host and target specific makefile fragments come in here.
-###
-
-.PHONY: all info install-info clean-info
-
-all: $(ALL)
-
-info: cfg-paper.info configure.info
- rootme=`pwd` ; export rootme ; $(MAKE) subdir_do DO=info "DODIRS=$(SUBDIRS)" "MAKEINFO=$(MAKEINFO)"
-
-check:; rootme=`pwd` ; export rootme ; $(MAKE) subdir_do DO=check \
- "DODIRS=`echo $(SUBDIRS) | sed -e \"s/libg\+\+//\"" \
- "MAKEINFO=$(MAKEINFO)"
- if [ -d libg++ ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd libg++ ; \
- $(MAKE) check "CC=$${rootme}/gcc/gcc \
- -B$${rootme}/gcc/") ; \
- fi
-
-
-clean-info:
- $(MAKE) subdir_do DO=clean-info "DODIRS=$(SUBDIRS)"
- rm -f cfg-paper.info* configure.info*
-
-cfg-paper.info: cfg-paper.texi
- rootme=`pwd` ; export rootme ; $(MAKEINFO) -o cfg-paper.info $(srcdir)/cfg-paper.texi
-
-configure.info: configure.texi
- rootme=`pwd` ; export rootme ; $(MAKEINFO) -o configure.info $(srcdir)/configure.texi
-
-install-info: install-info-dirs force
- [ -d $(infodir) ] || mkdir $(infodir)
- $(MAKE) subdir_do DO=install-info "DODIRS=$(SUBDIRS)"
- $(INSTALL_DATA) cfg-paper.info $(infodir)/cfg-paper.info
- $(INSTALL_DATA) configure.info $(infodir)/configure.info
- $(MAKE) dir.info install-dir.info
-
-install-dir.info:
- $(INSTALL_DATA) dir.info $(infodir)/dir.info
-
-# clib send_pr
-# all-libgcc
-all.normal: all-texinfo all-bison all-byacc all-flex all-ld \
- all-gas all-gcc all-binutils \
- all-libg++ all-gdb all-make all-cvs all-patch all-emacs \
- all-ispell all-fileutils \
- all-newlib
-all.cross: all-bison all-ld all-libgcc all-gdb
-# $(MAKE) subdir_do DO=all "DODIRS=$(SUBDIRS) $(OTHERS)"
-
-clean: clean-stamps clean-libiberty clean-texinfo clean-bfd clean-newlib clean-binutils \
- clean-bison clean-byacc clean-flex clean-ld clean-gas \
- clean-gcc clean-libgcc clean-readline clean-glob clean-gdb \
- clean-make clean-diff clean-grep clean-rcs clean-gdbm \
- clean-cvs clean-patch clean-emacs clean-ispell clean-fileutils \
- clean-libg++
- -rm -rf *.a TEMP errs core *.o *~ \#* TAGS *.E
-
-clean-stamps:
- -rm -f stmp-*
-
-install: $(INSTALL_TARGET) $(srcdir)/configure.man
- $(INSTALL_DATA) $(srcdir)/configure.man $(man1dir)/configure.1
-
-install.all: install-dirs install-libiberty install-texinfo \
- install-bfd install-binutils install-bison install-byacc \
- install-flex install-ld install-gas install-gcc \
- install-libgcc install-readline install-glob install-gdb \
- install-make install-cvs install-patch install-emacs \
- install-ispell install-fileutils install-libg++ install-newlib
-
-install.cross: install-dirs install-libiberty install-binutils install-bison \
- install-byacc install-ld install-gas install-libgcc \
- install-readline install-glob install-gdb
-
-### libiberty
-.PHONY: all-libiberty stmp-libiberty
-all-libiberty: stmp-libiberty
-stmp-libiberty:
- if [ -d ./libiberty ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./libiberty; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-libiberty
-
-clean-libiberty: force
- if [ -d ./libiberty ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./libiberty; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
-
-install-libiberty: force
- if [ -d ./libiberty ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./libiberty; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+AS = as
+AR = ar
+AR_FLAGS = rc
+CC = cc
+
+# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
+# here so that they can be overridden by Makefile fragments.
+HOST_CC = $(CC_FOR_BUILD)
+HOST_PREFIX =
+HOST_PREFIX_1 = loser-
+
+# These flag values are normally overridden by the configure script.
+CFLAGS = -g
+CXXFLAGS = -g -O2
+
+LIBCFLAGS = $(CFLAGS)
+CFLAGS_FOR_TARGET = $(CFLAGS)
+LDFLAGS_FOR_TARGET =
+LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
+PICFLAG =
+PICFLAG_FOR_TARGET =
+
+# start-sanitize-chill
+CHILLFLAGS = $(CFLAGS)
+CHILL_LIB = -lchill
+# end-sanitize-chill
+CXX = c++
+
+# Use -O2 to stress test the compiler.
+LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
+CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
+LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
-### texinfo
-.PHONY: all-texinfo stmp-texinfo
-all-texinfo: stmp-libiberty stmp-texinfo
-stmp-texinfo:
- if [ -d ./texinfo ] ; then \
- rootme=`pwd` ; export rootme ; \
- rootme=`pwd` ; export rootme ; \
- (cd ./texinfo; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-texinfo
-
-clean-texinfo: force
- if [ -d ./texinfo ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./texinfo; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+RANLIB = ranlib
-install-texinfo: force
- if [ -d ./texinfo ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./texinfo; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+DLLTOOL = dlltool
+WINDRES = windres
-### bfd
-.PHONY: all-bfd stmp-bfd
-all-bfd: stmp-bfd
-stmp-bfd:
- if [ -d ./bfd ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./bfd; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-bfd
-
-clean-bfd: force
- if [ -d ./bfd ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./bfd; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+NM = nm
-install-bfd: force
- if [ -d ./bfd ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./bfd; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+LD = ld
-### binutils
-.PHONY: all-binutils stmp-binutils
-all-binutils: stmp-libiberty stmp-bfd stmp-binutils
-stmp-binutils:
- if [ -d ./binutils ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./binutils; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-binutils
-
-clean-binutils: force
- if [ -d ./binutils ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./binutils; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+# Not plain GZIP, since gzip looks there for extra command-line options.
+GZIPPROG = gzip
-install-binutils: force
- if [ -d ./binutils ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./binutils; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+# These values are substituted by configure.
+DEFAULT_YACC = yacc
+DEFAULT_LEX = lex
-### newlib
-.PHONY: all-newlib stmp-newlib
-all-newlib: stmp-newlib
-stmp-newlib:
- if [ -d ./newlib ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./newlib; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-newlib
-
-clean-newlib: force
- if [ -d ./newlib ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./newlib; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+# BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
+BISON = `if [ -f $$r/byacc/byacc ] ; \
+ then echo $$r/byacc/byacc ; \
+ else echo ${DEFAULT_YACC} ; \
+ fi`
-install-newlib: force
- if [ -d ./newlib ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./newlib; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+LEX = `if [ -f $$r/flex/flex ] ; \
+ then echo $$r/flex/flex ; \
+ else echo ${DEFAULT_LEX} ; fi`
-### byacc
-.PHONY: all-byacc stmp-byacc
-all-byacc: stmp-byacc
-stmp-byacc:
- if [ -d ./byacc ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./byacc; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-byacc
-
-clean-byacc: force
- if [ -d ./byacc ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./byacc; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+M4 = `if [ -f $$r/m4/m4 ] ; \
+ then echo $$r/m4/m4 ; \
+ else echo m4 ; fi`
-install-byacc: force
- if [ -d ./byacc ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./byacc; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+MAKEINFO = `if [ -f $$r/texinfo/makeinfo/Makefile ] ; \
+ then echo $$r/texinfo/makeinfo/makeinfo ; \
+ else echo makeinfo ; fi`
-### bison
-.PHONY: all-bison stmp-bison
-all-bison: stmp-libiberty stmp-bison
-stmp-bison:
- if [ -d ./bison ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./bison; \
- $(MAKE) \
- "prefix=$(prefix)" \
- "datadir=$(datadir)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-bison
-
-clean-bison: force
- if [ -d ./bison ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./bison; \
- $(MAKE) \
- "prefix=$(prefix)" \
- "datadir=$(datadir)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+# This just becomes part of the MAKEINFO definition passed down to
+# sub-makes. It lets flags be given on the command line while still
+# using the makeinfo from the object tree.
+MAKEINFOFLAGS =
-install-bison: force
- if [ -d ./bison ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./bison; \
- $(MAKE) \
- "prefix=$(prefix)" \
- "datadir=$(datadir)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+EXPECT = `if [ -f $$r/expect/expect ] ; \
+ then echo $$r/expect/expect ; \
+ else echo expect ; fi`
-### gcc
-.PHONY: all-gcc stmp-gcc
-all-gcc: stmp-libiberty stmp-bison stmp-gas
-stmp-gcc:
- if [ -d ./gcc ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gcc; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-gcc
+RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \
+ then echo $$s/dejagnu/runtest ; \
+ else echo runtest ; fi`
-clean-gcc: force
- if [ -d ./gcc ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gcc; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
-
-install-gcc:
- if [ -d ./gcc ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gcc; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
-
-### readline
-.PHONY: all-readline stmp-readline
-all-readline: stmp-readline
-stmp-readline:
- if [ -d ./readline ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./readline; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-readline
-
-clean-readline: force
- if [ -d ./readline ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./readline; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
-install-readline: force
- if [ -d ./readline ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./readline; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+# compilers to use to create programs which must be run in the build
+# environment.
+CC_FOR_BUILD = $(CC)
+CXX_FOR_BUILD = $(CXX)
-### glob
-.PHONY: all-glob stmp-glob
-all-glob: stmp-glob
-stmp-glob:
- if [ -d ./glob ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./glob; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-glob
-
-clean-glob: force
- if [ -d ./glob ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./glob; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+SUBDIRS = "this is set via configure, don't edit this"
+OTHERS =
-install-glob: force
- if [ -d ./glob ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./glob; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+# This is set by the configure script to the list of directories which
+# should be built using the target tools.
+TARGET_CONFIGDIRS = libiberty libgloss newlib libio librx libstdc++ libg++ winsup
-### gas
-.PHONY: all-gas stmp-gas
-all-gas: stmp-libiberty stmp-bfd stmp-gas
-stmp-gas:
- if [ -d ./gas ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gas; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-gas
-
-clean-gas: force
- if [ -d ./gas ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gas; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+# Target libraries are put under this directory:
+# Changed by configure to $(target_alias) if cross.
+TARGET_SUBDIR = .
-install-gas: force
- if [ -d ./gas ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gas; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+# This is set by the configure script to the arguments passed to configure.
+CONFIG_ARGUMENTS =
-### ld
-.PHONY: all-ld stmp-ld
-all-ld: stmp-libiberty stmp-bfd stmp-bison stmp-ld
-stmp-ld:
- if [ -d ./ld ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./ld; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-ld
-
-clean-ld: force
- if [ -d ./ld ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./ld; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+# This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
+# was used.
+SET_LIB_PATH =
-install-ld: force
- if [ -d ./ld ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./ld; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+# This is the name of the environment variable used for the path to
+# the libraries. This may be changed by configure.in.
+RPATH_ENVVAR = LD_LIBRARY_PATH
-### libgcc (and libgcc1)
-.PHONY: all-libgcc stmp-libgcc1 stmp-libgcc
-all-libgcc1: all-gas all-binutils stmp-libgcc1
-stmp-libgcc1:
- if [ -d ./libgcc ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./libgcc; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- libgcc1.a) ; \
- else \
- true ; \
- fi
- touch stmp-libgcc1
-
-clean-libgcc1: force
- if [ -d ./libgcc ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./libgcc; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean-libgcc1) ; \
- else \
- true ; \
- fi
+# configure.in sets SET_LIB_PATH to this if --enable-shared was used.
+REALLY_SET_LIB_PATH = \
+ $(RPATH_ENVVAR)=$$r/bfd:$$r/opcodes:$$$(RPATH_ENVVAR); \
+ export $(RPATH_ENVVAR);
-install-libgcc1: force
- echo libgcc1 is a component, not an installable target
-
-all-libgcc: all-gas all-gcc all-binutils stmp-libgcc
-stmp-libgcc:
- true
- if [ -d ./libgcc ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./libgcc; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-libgcc
-
-clean-libgcc: force
- if [ -d ./libgcc ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./libgcc; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
-
-install-libgcc: force
- if [ -d ./libgcc ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./libgcc; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
-
-### gdb
-.PHONY: all-gdb stmp-gdb
-all-gdb: stmp-bfd stmp-libiberty stmp-readline stmp-glob stmp-bison stmp-gdb
-stmp-gdb:
- if [ -d ./gdb ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gdb; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-gdb
-
-clean-gdb: force
- if [ -d ./gdb ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gdb; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
-
-install-gdb: force
- if [ -d ./gdb ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gdb; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
-
-### make
-.PHONY: all-make stmp-make
-all-make: all-libiberty stmp-make
-stmp-make:
- if [ -d ./make ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./make; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-make
-
-clean-make: force
- if [ -d ./make ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./make; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
-
-install-make: force
- if [ -d ./make ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./make; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+ALL = all.normal
+INSTALL_TARGET = installdirs \
+ $(INSTALL_MODULES) \
+ $(INSTALL_TARGET_MODULES) \
+ $(INSTALL_X11_MODULES) \
+ install-gcc \
+ $(INSTALL_DOSREL)
+
+
+CC_FOR_TARGET = ` \
+ if [ -f $$r/gcc/xgcc ] ; then \
+ if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
+ if [ -f $$r/$(TARGET_SUBDIR)/winsup/Makefile ] ; then \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -B$$r/newlib/ -L$$r/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
+ else \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
+ fi; \
+ else \
+ echo $$r/gcc/xgcc -B$$r/gcc/; \
+ fi; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(CC); \
+ else \
+ t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
+ fi; \
+ fi`
+
+# If CC_FOR_TARGET is not overriden on the command line, then this
+# variable is passed down to the gcc Makefile, where it is used to
+# build libgcc2.a. We define it here so that it can itself be
+# overridden on the command line.
+GCC_FOR_TARGET = $$r/gcc/xgcc -B$$r/gcc/
+
+# start-sanitize-chill
+CHILL_FOR_TARGET = ` \
+ if [ -f $$r/gcc/xgcc ] ; then \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(CC); \
+ else \
+ t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
+ fi; \
+ fi`
+
+# end-sanitize-chill
+
+CXX_FOR_TARGET = ` \
+ if [ -f $$r/gcc/xgcc ] ; then \
+ if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
+ if [ -f $$r/$(TARGET_SUBDIR)/winsup/Makefile ] ; then \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -B$$r/newlib/ -L$$r/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
+ else \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
+ fi; \
+ else \
+ echo $$r/gcc/xgcc -B$$r/gcc/; \
+ fi; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(CXX); \
+ else \
+ t='$(program_transform_name)'; echo c++ | sed -e 's/x/x/' $$t; \
+ fi; \
+ fi`
+
+AS_FOR_TARGET = ` \
+ if [ -f $$r/gas/as.new ] ; then \
+ echo $$r/gas/as.new ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(AS); \
+ else \
+ t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+LD_FOR_TARGET = ` \
+ if [ -f $$r/ld/ld.new ] ; then \
+ echo $$r/ld/ld.new ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(LD); \
+ else \
+ t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+DLLTOOL_FOR_TARGET = ` \
+ if [ -f $$r/binutils/dlltool ] ; then \
+ echo $$r/binutils/dlltool ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(DLLTOOL); \
+ else \
+ t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+WINDRES_FOR_TARGET = ` \
+ if [ -f $$r/binutils/windres ] ; then \
+ echo $$r/binutils/windres ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(WINDRES); \
+ else \
+ t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+AR_FOR_TARGET = ` \
+ if [ -f $$r/binutils/ar ] ; then \
+ echo $$r/binutils/ar ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(AR); \
+ else \
+ t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+RANLIB_FOR_TARGET = ` \
+ if [ -f $$r/binutils/ranlib ] ; then \
+ echo $$r/binutils/ranlib ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(RANLIB); \
+ else \
+ t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+NM_FOR_TARGET = ` \
+ if [ -f $$r/binutils/nm.new ] ; then \
+ echo $$r/binutils/nm.new ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(NM); \
+ else \
+ t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
-### diff
-.PHONY: all-diff stmp-diff
-all-diff: stmp-diff
-stmp-diff:
- if [ -d ./diff ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./diff; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-diff
-
-clean-diff: force
- if [ -d ./diff ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./diff; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+#### host and target specific makefile fragments come in here.
+###
-install-diff: force
- if [ -d ./diff ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./diff/; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+# Flags to pass down to all sub-makes.
+# Please keep these in alphabetical order.
+BASE_FLAGS_TO_PASS = \
+ "AR_FLAGS=$(AR_FLAGS)" \
+ "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
+ "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
+ "BISON=$(BISON)" \
+ "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
+ "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
+ "CFLAGS=$(CFLAGS)" \
+ "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
+ $(start-sanitize-chill)\
+ "CHILLFLAGS=$(CHILLFLAGS)" \
+ "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
+ "CHILL_LIB=$(CHILL_LIB)" \
+ $(end-sanitize-chill)\
+ "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
+ "CXXFLAGS=$(CXXFLAGS)" \
+ "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
+ "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
+ "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
+ "INSTALL=$(INSTALL)" \
+ "INSTALL_DATA=$(INSTALL_DATA)" \
+ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
+ "LDFLAGS=$(LDFLAGS)" \
+ "LEX=$(LEX)" \
+ "LD_FOR_TARGET=$(LD_FOR_TARGET)" \
+ "LIBCFLAGS=$(LIBCFLAGS)" \
+ "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
+ "LIBCXXFLAGS=$(LIBCXXFLAGS)" \
+ "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
+ "M4=$(M4)" \
+ "MAKE=$(MAKE)" \
+ "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
+ "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
+ "PICFLAG=$(PICFLAG)" \
+ "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
+ "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
+ "SHELL=$(SHELL)" \
+ "EXPECT=$(EXPECT)" \
+ "RUNTEST=$(RUNTEST)" \
+ "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
+ "WINDRES_FOR_TARGET=$(WINDRES_FOR_TARGET)" \
+ "YACC=$(BISON)" \
+ "exec_prefix=$(exec_prefix)" \
+ "prefix=$(prefix)" \
+ "tooldir=$(tooldir)"
+
+# Flags to pass down to most sub-makes, in which we're building with
+# the host environment.
+# If any variables are added here, they must be added to do-*, below.
+EXTRA_HOST_FLAGS = \
+ 'AR=$(AR)' \
+ 'AS=$(AS)' \
+ 'CC=$(CC)' \
+ 'CXX=$(CXX)' \
+ 'DLLTOOL=$(DLLTOOL)' \
+ 'LD=$(LD)' \
+ 'NM=$(NM)' \
+ 'RANLIB=$(RANLIB)' \
+ 'WINDRES=$(WINDRES)'
+
+FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
+
+# Flags that are concerned with the location of the X11 include files
+# and library files
+#
+# NOTE: until the top-level is getting the values via autoconf, it only
+# causes problems to have this top-level Makefile overriding the autoconf-set
+# values in child directories. Only variables that don't conflict with
+# autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now.
+#
+X11_FLAGS_TO_PASS = \
+ 'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \
+ 'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
+
+# Flags to pass down to makes which are built with the target environment.
+# The double $ decreases the length of the command line; the variables
+# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
+# If any variables are added here, they must be added to do-*, below.
+EXTRA_TARGET_FLAGS = \
+ 'AR=$$(AR_FOR_TARGET)' \
+ 'AS=$$(AS_FOR_TARGET)' \
+ 'CC=$$(CC_FOR_TARGET)' \
+ 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
+ 'CXX=$$(CXX_FOR_TARGET)' \
+ 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
+ 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
+ 'LD=$$(LD_FOR_TARGET)' \
+ 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
+ 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
+ 'NM=$$(NM_FOR_TARGET)' \
+ 'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
+ 'RANLIB=$$(RANLIB_FOR_TARGET)' \
+ 'WINDRES=$$(WINDRES_FOR_TARGET)'
+
+TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
+
+# Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
+# unfortunately needs the native compiler and the target ar and
+# ranlib.
+# If any variables are added here, they must be added to do-*, below.
+# The HOST_* variables are a special case, which are used for the gcc
+# cross-building scheme.
+EXTRA_GCC_FLAGS = \
+ 'AR=$$(AR_FOR_TARGET)' \
+ 'AS=$(AS)' \
+ 'CC=$(CC)' \
+ 'CXX=$(CXX)' \
+ 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
+ 'HOST_CC=$(CC_FOR_BUILD)' \
+ 'HOST_PREFIX=$(HOST_PREFIX)' \
+ 'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
+ 'NM=$(NM)' \
+ 'RANLIB=$$(RANLIB_FOR_TARGET)' \
+ 'WINDRES=$$(WINDRES_FOR_TARGET)' \
+ "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
+ `if test x"$(LANGUAGES)" != x; then echo "LANGUAGES=$(LANGUAGES)"; fi` \
+ `if test x"$(STMP_FIXPROTO)" != x; then echo "STMP_FIXPROTO=$(STMP_FIXPROTO)"; fi` \
+ `if test x"$(LIMITS_H_TEST)" != x; then echo "LIMITS_H_TEST=$(LIMITS_H_TEST)"; fi` \
+ `if test x"$(LIBGCC1_TEST)" != x; then echo "LIBGCC1_TEST=$(LIBGCC1_TEST)"; fi` \
+ `if test x"$(LIBGCC2_CFLAGS)" != x; then echo "LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)"; fi` \
+ `if test x"$(LIBGCC2_DEBUG_CFLAGS)" != x; then echo "LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)"; fi` \
+ `if test x"$(LIBGCC2_INCLUDES)" != x; then echo "LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)"; fi` \
+ `if test x"$(ENQUIRE)" != x; then echo "ENQUIRE=$(ENQUIRE)"; fi` \
+ `if test x"$(BOOT_CFLAGS)" != x; then echo "BOOT_CFLAGS=$(BOOT_CFLAGS)"; fi`
+
+GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
+
+# This is a list of the targets for all of the modules which are compiled
+# using $(FLAGS_TO_PASS).
+ALL_MODULES = \
+ all-apache \
+ all-autoconf \
+ all-automake \
+ all-bash \
+ all-bfd \
+ all-binutils \
+ all-byacc \
+ all-cvs \
+ all-db \
+ all-dejagnu \
+ all-diff \
+ all-dosutils \
+ all-etc \
+ all-fileutils \
+ all-findutils \
+ all-find \
+ all-flex \
+ all-gas \
+ all-gawk \
+ all-gnuserv \
+ all-gprof \
+ all-grep \
+ all-grez \
+ all-gzip \
+ all-hello \
+ $(start-sanitize-ide) \
+ all-ilu \
+ $(end-sanitize-ide) \
+ all-indent \
+ all-inet \
+ all-ispell \
+ all-itcl \
+ all-ld \
+ all-libiberty \
+ $(start-sanitize-ide) \
+ all-libide \
+ $(end-sanitize-ide) \
+ all-m4 \
+ all-make \
+ all-mmalloc \
+ all-opcodes \
+ all-patch \
+ all-perl \
+ all-prms \
+ all-rcs \
+ all-readline \
+ all-release \
+ all-recode \
+ all-sed \
+ all-send-pr \
+ all-shellutils \
+ all-sim \
+ all-sn \
+ all-tar \
+ all-tcl \
+ all-texinfo \
+ all-textutils \
+ all-tgas \
+ all-time \
+ all-uudecode \
+ $(start-sanitize-ide) \
+ all-vmake \
+ $(end-sanitize-ide) \
+ all-wdiff
+
+# This is a list of the check targets for all of the modules which are
+# compiled using $(FLAGS_TO_PASS).
+#
+# The list is in two parts. The first lists those tools which
+# are tested as part of the host's native tool-chain, and not
+# tested in a cross configuration.
+NATIVE_CHECK_MODULES = \
+ check-byacc \
+ check-flex
+
+CROSS_CHECK_MODULES = \
+ check-apache \
+ check-autoconf \
+ check-automake \
+ check-bash \
+ check-bfd \
+ check-binutils \
+ check-cvs \
+ check-db \
+ check-dejagnu \
+ check-diff \
+ check-etc \
+ check-fileutils \
+ check-findutils \
+ check-find \
+ check-gas \
+ check-gawk \
+ check-gnuserv \
+ check-gprof \
+ check-grep \
+ check-gzip \
+ check-hello \
+ $(start-sanitize-ide) \
+ check-ilu \
+ $(end-sanitize-ide) \
+ check-indent \
+ check-inet \
+ check-ispell \
+ check-itcl \
+ check-ld \
+ check-libiberty \
+ $(start-sanitize-ide) \
+ check-libide \
+ $(end-sanitize-ide) \
+ check-m4 \
+ check-make \
+ check-mmcheckoc \
+ check-opcodes \
+ check-patch \
+ check-perl \
+ check-prms \
+ check-rcs \
+ check-readline \
+ check-recode \
+ check-sed \
+ check-send-pr \
+ check-shellutils \
+ check-sn \
+ check-sim \
+ check-tar \
+ check-tcl \
+ check-texinfo \
+ check-textutils \
+ check-tgas \
+ check-time \
+ check-uudecode \
+ $(start-sanitize-ide) \
+ check-vmake \
+ $(end-sanitize-ide) \
+ check-wdiff
+
+CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
+
+# This is a list of the install targets for all of the modules which are
+# compiled using $(FLAGS_TO_PASS).
+# We put install-opcodes before install-binutils because the installed
+# binutils might be on PATH, and they might need the shared opcodes
+# library.
+INSTALL_MODULES = \
+ install-apache \
+ install-autoconf \
+ install-automake \
+ install-bash \
+ install-bfd \
+ install-opcodes \
+ install-binutils \
+ install-byacc \
+ install-cvs \
+ install-db \
+ install-dejagnu \
+ install-diff \
+ install-dosutils \
+ install-etc \
+ install-fileutils \
+ install-findutils \
+ install-find \
+ install-flex \
+ install-gas \
+ install-gawk \
+ install-gnuserv \
+ install-gprof \
+ install-grep \
+ install-grez \
+ install-gzip \
+ install-hello \
+ $(start-sanitize-ide) \
+ install-ilu \
+ $(end-sanitize-ide) \
+ install-indent \
+ install-inet \
+ install-ispell \
+ install-itcl \
+ install-ld \
+ install-libiberty \
+ $(start-sanitize-ide) \
+ install-libide \
+ $(end-sanitize-ide) \
+ install-m4 \
+ install-make \
+ install-mmalloc \
+ install-patch \
+ install-perl \
+ install-prms \
+ install-rcs \
+ install-readline \
+ install-recode \
+ install-sed \
+ install-send-pr \
+ install-shellutils \
+ install-sim \
+ install-sn \
+ install-tar \
+ install-tcl \
+ install-texinfo \
+ install-textutils \
+ install-tgas \
+ install-time \
+ install-uudecode \
+ $(start-sanitize-ide) \
+ install-vmake \
+ $(end-sanitize-ide) \
+ install-wdiff
+
+# This is a list of the targets for all of the modules which are compiled
+# using $(X11_FLAGS_TO_PASS).
+ALL_X11_MODULES = \
+ all-emacs \
+ all-emacs19 \
+ all-gdb \
+ all-expect \
+ all-gash \
+ all-guile \
+ all-tclX \
+ all-tk
+
+# This is a list of the check targets for all of the modules which are
+# compiled using $(X11_FLAGS_TO_PASS).
+CHECK_X11_MODULES = \
+ check-emacs \
+ check-gdb \
+ check-guile \
+ check-expect \
+ check-gash \
+ check-tclX
+
+# This is a list of the install targets for all the modules which are
+# compiled using $(X11_FLAGS_TO_PASS).
+INSTALL_X11_MODULES = \
+ install-emacs \
+ install-emacs19 \
+ install-gdb \
+ install-guile \
+ install-expect \
+ install-gash \
+ install-tclX \
+ install-tk
+
+# This is a list of the targets for all of the modules which are compiled
+# using $(TARGET_FLAGS_TO_PASS).
+ALL_TARGET_MODULES = \
+ all-target-libio \
+ all-target-libstdc++ \
+ all-target-librx \
+ all-target-libg++ \
+ all-target-newlib \
+ all-target-winsup \
+ all-target-libgloss \
+ all-target-libiberty \
+ all-target-gperf \
+ all-target-examples
+
+# This is a list of the configure targets for all of the modules which
+# are compiled using the target tools.
+CONFIGURE_TARGET_MODULES = \
+ configure-target-libio \
+ configure-target-libstdc++ \
+ configure-target-librx \
+ configure-target-libg++ \
+ configure-target-newlib \
+ configure-target-winsup \
+ configure-target-libgloss \
+ configure-target-libiberty \
+ configure-target-gperf \
+ configure-target-examples
+
+# This is a list of the check targets for all of the modules which are
+# compiled using $(TARGET_FLAGS_TO_PASS).
+CHECK_TARGET_MODULES = \
+ check-target-libio \
+ check-target-libstdc++ \
+ check-target-libg++ \
+ check-target-newlib \
+ check-target-winsup \
+ check-target-libiberty \
+ check-target-gperf
+
+# This is a list of the install targets for all of the modules which are
+# compiled using $(TARGET_FLAGS_TO_PASS).
+INSTALL_TARGET_MODULES = \
+ install-target-libio \
+ install-target-libstdc++ \
+ install-target-libg++ \
+ install-target-newlib \
+ install-target-winsup \
+ install-target-libgloss \
+ install-target-libiberty \
+ install-target-gperf
+
+# This is a list of the targets for which we can do a clean-{target}.
+CLEAN_MODULES = \
+ clean-apache \
+ clean-autoconf \
+ clean-automake \
+ clean-bash \
+ clean-bfd \
+ clean-binutils \
+ clean-byacc \
+ clean-cvs \
+ clean-db \
+ clean-dejagnu \
+ clean-diff \
+ clean-dosutils \
+ clean-etc \
+ clean-fileutils \
+ clean-findutils \
+ clean-find \
+ clean-flex \
+ clean-gas \
+ clean-gawk \
+ clean-gnuserv \
+ clean-gprof \
+ clean-grep \
+ clean-grez \
+ clean-gzip \
+ clean-hello \
+ $(start-sanitize-ide) \
+ clean-ilu \
+ $(end-sanitize-ide) \
+ clean-indent \
+ clean-inet \
+ clean-ispell \
+ clean-itcl \
+ clean-ld \
+ clean-libiberty \
+ $(start-sanitize-ide) \
+ clean-libide \
+ $(end-sanitize-ide) \
+ clean-m4 \
+ clean-make \
+ clean-mmalloc \
+ clean-opcodes \
+ clean-patch \
+ clean-perl \
+ clean-prms \
+ clean-rcs \
+ clean-readline \
+ clean-release \
+ clean-recode \
+ clean-sed \
+ clean-send-pr \
+ clean-shellutils \
+ clean-sim \
+ clean-sn \
+ clean-tar \
+ clean-tcl \
+ clean-texinfo \
+ clean-textutils \
+ clean-tgas \
+ clean-time \
+ clean-uudecode \
+ $(start-sanitize-ide) \
+ clean-vmake \
+ $(end-sanitize-ide) \
+ clean-wdiff
+
+# All of the target modules that can be cleaned
+CLEAN_TARGET_MODULES = \
+ clean-target-libio \
+ clean-target-libstdc++ \
+ clean-target-librx \
+ clean-target-libg++ \
+ clean-target-newlib \
+ clean-target-winsup \
+ clean-target-libgloss \
+ clean-target-libiberty \
+ clean-target-gperf \
+ clean-target-examples
+
+# All of the x11 modules that can be cleaned
+CLEAN_X11_MODULES = \
+ clean-emacs \
+ clean-emacs19 \
+ clean-gdb \
+ clean-expect \
+ clean-gash \
+ clean-guile \
+ clean-tclX \
+ clean-tk
+
+# The first rule in the file had better be this one. Don't put any above it.
+all: all.normal
+.PHONY: all
+
+# The target built for a native build.
+.PHONY: all.normal
+all.normal: \
+ $(ALL_MODULES) \
+ $(ALL_X11_MODULES) \
+ $(ALL_TARGET_MODULES) \
+ all-gcc
+
+# Do a target for all the subdirectories. A ``make do-X'' will do a
+# ``make X'' in all subdirectories (because, in general, there is a
+# dependency (below) of X upon do-X, a ``make X'' will also do this,
+# but it may do additional work as well).
+# This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
+# because it is so large that it can easily overflow the command line
+# length limit on some systems.
+DO_X = \
+ do-clean \
+ do-distclean \
+ do-dvi \
+ do-info \
+ do-install-info \
+ do-installcheck \
+ do-mostlyclean \
+ do-maintainer-clean \
+ do-TAGS
+.PHONY: $(DO_X)
+$(DO_X):
+ @target=`echo $@ | sed -e 's/^do-//'`; \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(SUBDIRS) -dummy-; do \
+ if [ -f ./$$i/Makefile ]; then \
+ case $$i in \
+ gcc) \
+ for flag in $(EXTRA_GCC_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
+ done; \
+ ;; \
+ *) \
+ for flag in $(EXTRA_HOST_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
+ done; \
+ ;; \
+ esac ; \
+ export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
+ if (cd ./$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ $${target}); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+ @target=`echo $@ | sed -e 's/^do-//'`; \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(TARGET_CONFIGDIRS) -dummy-; do \
+ if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
+ done; \
+ export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
+ if (cd $(TARGET_SUBDIR)/$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ $${target}); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
-### grep
-.PHONY: all-grep stmp-grep
-all-grep: stmp-grep
-stmp-grep:
- if [ -d ./grep ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./grep; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-grep
-
-clean-grep: force
- if [ -d ./grep ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./grep; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+# Here are the targets which correspond to the do-X targets.
-install-grep: force
- if [ -d ./grep ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./grep; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+.PHONY: info installcheck dvi install-info
+.PHONY: clean distclean mostlyclean maintainer-clean realclean
+.PHONY: local-clean local-distclean local-maintainer-clean
+info: do-info
+installcheck: do-installcheck
+dvi: do-dvi
-### rcs
-.PHONY: all-rcs stmp-rcs
-all-rcs: stmp-diff stmp-grep stmp-rcs
-stmp-rcs:
- if [ -d ./rcs ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./rcs; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-rcs
-
-clean-rcs: force
- if [ -d ./rcs ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./rcs; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+# Make sure makeinfo is built before we do a `make info'.
+do-info: all-texinfo
-install-rcs: install-grep install-diff force
- if [ -d ./rcs ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./rcs; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+install-info: do-install-info dir.info
+ s=`cd $(srcdir); pwd`; export s; \
+ if [ -f dir.info ] ; then \
+ $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
+ else true ; fi
-### gdbm
-.PHONY: all-gdbm stmp-gdbm
-all-gdbm: stmp-gdbm
-stmp-gdbm: force
- if [ -d ./gdbm ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gdbm; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-gdbm
-
-clean-gdbm: force
- if [ -d ./gdbm ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gdbm; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+local-clean:
+ -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E
-install-gdbm: force
- if [ -d ./gdbm ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gdbm; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+local-distclean:
+ -rm -f Makefile config.status config.cache
+ -if [ "$(TARGET_SUBDIR)" != "." ]; then \
+ rm -rf $(TARGET_SUBDIR); \
+ else true; fi
-### cvs
-.PHONY: all-cvs stmp-cvs
-all-cvs: stmp-cvs stmp-rcs stmp-grep stmp-diff
-stmp-cvs: stmp-gdbm force
- if [ -d ./cvs ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./cvs; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-cvs
-
-clean-cvs: clean-gdbm force
- if [ -d ./cvs ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./cvs; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+local-maintainer-clean:
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
-install-cvs: install-rcs install-gdbm force
- if [ -d ./cvs ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./cvs; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+clean: do-clean local-clean
+mostlyclean: do-mostlyclean local-clean
+distclean: do-distclean local-clean local-distclean
+maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
+maintainer-clean: local-distclean
+realclean: maintainer-clean
-### patch
-.PHONY: all-patch stmp-patch
-all-patch: stmp-patch
-stmp-patch: force
- if [ -d ./patch ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./patch; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
+# This rule is used to clean specific modules.
+.PHONY: $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc
+$(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc:
+ @dir=`echo $@ | sed -e 's/clean-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \
else \
- true ; \
- fi
- touch stmp-patch
-
-clean-patch: force
- if [ -d ./patch ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./patch; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
+ true; \
fi
-install-patch: force
- if [ -d ./patch ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./patch; \
- $(MAKE) \
- bindir=$(bindir) \
- man1dir=$(man1dir) \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
+.PHONY: $(CLEAN_TARGET_MODULES)
+$(CLEAN_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/clean-target-//'`; \
+ rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) clean); \
else \
- true ; \
+ true; \
fi
-### emacs
-.PHONY: all-emacs stmp-emacs
-all-emacs: stmp-emacs
-stmp-emacs: force
- if [ -d ./emacs ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./emacs; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-emacs
-
-clean-emacs: force
- if [ -d ./emacs ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./emacs; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+clean-target: $(CLEAN_TARGET_MODULES)
-install-emacs: install-rcs install-gdbm force
- if [ -d ./emacs ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./emacs; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+# Check target.
-### ispell
-.PHONY: all-ispell stmp-ispell
-all-ispell: stmp-ispell
-stmp-ispell: all-emacs force
- if [ -d ./ispell ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./ispell; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-ispell
-
-clean-ispell: force
- if [ -d ./ispell ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./ispell; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+.PHONY: check
+check: $(CHECK_MODULES) \
+ $(CHECK_TARGET_MODULES) \
+ $(CHECK_X11_MODULES) \
+ check-gcc
-install-ispell: install-rcs install-gdbm force
- if [ -d ./ispell ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./ispell; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+# Installation targets.
-### flex
-.PHONY: all-flex stmp-flex
-all-flex: stmp-flex
-stmp-flex: force
- if [ -d ./flex ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./flex; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-flex
-
-clean-flex: force
- if [ -d ./flex ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./flex; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+.PHONY: install uninstall source-vault binary-vault vault-install
+install: $(INSTALL_TARGET)
-install-flex: force
- if [ -d ./flex ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./flex; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+uninstall:
+ @echo "the uninstall target is not supported in this tree"
-### fileutils
-.PHONY: all-fileutils stmp-fileutils
-all-fileutils: stmp-fileutils
-stmp-fileutils: force
- if [ -d ./fileutils ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./fileutils; \
- $(MAKE) \
- "prefix=$(prefix)" \
- "datadir=$(datadir)" \
- "mandir=$(mandir)" \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
- else \
- true ; \
- fi
- touch stmp-fileutils
-
-clean-fileutils: force
- if [ -d ./fileutils ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./fileutils; \
- $(MAKE) \
- "prefix=$(prefix)" \
- "datadir=$(datadir)" \
- "mandir=$(mandir)" \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
- fi
+source-vault:
+ $(MAKE) -f ./release/Build-A-Release \
+ host=$(host_alias) source-vault
-install-fileutils: force
- if [ -d ./fileutils ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./fileutils; \
- $(MAKE) \
- "prefix=$(prefix)" \
- "datadir=$(datadir)" \
- "mandir=$(mandir)" \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+binary-vault:
+ $(MAKE) -f ./release/Build-A-Release \
+ host=$(host_alias) target=$(target_alias)
-### libg++
-.PHONY: all-libg++ stmp-libg++
-all-libg++: stmp-gas stmp-ld stmp-gcc stmp-libg++
-stmp-libg++: stmp-gcc force
- if [ -d ./libg++ ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./libg++; \
- $(MAKE) \
- "prefix=$(prefix)" \
- "datadir=$(datadir)" \
- "mandir=$(mandir)" \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$${rootme}/gcc/gcc -B$${rootme}/gcc/" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- all) ; \
+vault-install:
+ @if [ -f ./release/vault-install ] ; then \
+ ./release/vault-install $(host_alias) $(target_alias) ; \
else \
- true ; \
- fi
- touch stmp-libgxx
-
-clean-libg++: force
- if [ -d ./libg++ ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./libg++; \
- $(MAKE) \
- "prefix=$(prefix)" \
- "datadir=$(datadir)" \
- "mandir=$(mandir)" \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- clean) ; \
- else \
- true ; \
+ true ; \
fi
-install-libg++: force
- if [ -d ./libg++ ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./libg++; \
- $(MAKE) \
- "prefix=$(prefix)" \
- "datadir=$(datadir)" \
- "mandir=$(mandir)" \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- install) ; \
- else \
- true ; \
- fi
+.PHONY: install.all
+install.all: install-no-fixedincludes
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`pwd` ; export r ; \
+ $(SET_LIB_PATH) \
+ (cd ./gcc; \
+ $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
+ else \
+ true ; \
+ fi
+
+# inet-install is used because the I*Net wants DejaGNU installed but
+# not built. Similarly, gzip is built but not installed.
+inet-install:
+ $(MAKE) INSTALL_MODULES="`echo $(INSTALL_MODULES) | sed -e 's/install-dejagnu//' -e 's/install-gzip//'`" install
+
+# install-no-fixedincludes is used because Cygnus can not distribute
+# the fixed header files.
+.PHONY: install-no-fixedincludes
+install-no-fixedincludes: \
+ installdirs \
+ $(INSTALL_MODULES) \
+ $(INSTALL_TARGET_MODULES) \
+ $(INSTALL_X11_MODULES) \
+ gcc-no-fixedincludes
+
+# Install the gcc headers files, but not the fixed include files,
+# which Cygnus is not allowed to distribute. This rule is very
+# dependent on the workings of the gcc Makefile.in.
+.PHONY: gcc-no-fixedincludes
+gcc-no-fixedincludes:
+ @if [ -f ./gcc/Makefile ]; then \
+ rm -rf gcc/tmp-include; \
+ mv gcc/include gcc/tmp-include 2>/dev/null; \
+ mkdir gcc/include; \
+ cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
+ touch gcc/stmp-fixinc gcc/include/fixed; \
+ rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd` ; export s; \
+ $(SET_LIB_PATH) \
+ (cd ./gcc; \
+ $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ rm -rf gcc/include; \
+ mv gcc/tmp-include gcc/include 2>/dev/null; \
+ else true; fi
+
+# This rule is used to build the modules which use FLAGS_TO_PASS. To
+# build a target all-X means to cd to X and make all.
+#
+# all-gui, and all-libproc are handled specially because
+# they are still experimental, and if they fail to build, that
+# shouldn't stop "make all".
+.PHONY: $(ALL_MODULES) all-gui all-libproc
+$(ALL_MODULES) all-gui all-libproc:
+ @dir=`echo $@ | sed -e 's/all-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# These rules are used to check the modules which use FLAGS_TO_PASS.
+# To build a target check-X means to cd to X and make check. Some
+# modules are only tested in a native toolchain.
+
+.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
+$(NATIVE_CHECK_MODULES):
+ @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi; \
+ fi
+
+$(CROSS_CHECK_MODULES):
+ @dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi
+
+# This rule is used to install the modules which use FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(INSTALL_MODULES)
+$(INSTALL_MODULES): installdirs
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+# This rule is used to configure the modules which are built with the
+# target tools.
+.PHONY: $(CONFIGURE_TARGET_MODULES)
+$(CONFIGURE_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/configure-target-//'`; \
+ if [ -d $(TARGET_SUBDIR)/$${dir} ]; then \
+ r=`pwd`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/$${dir}/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/$${dir}/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for $${dir}, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/Makefile; \
+ mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=`echo $@ | sed -e 's/configure-target-//'`; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/$${dir} ]; then \
+ [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
+ cd $(TARGET_SUBDIR)/$${dir}; \
+ case $(srcdir) in \
+ /*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/$${dir}"; \
+ libsrcdir="$$s/$${dir}"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ $(SHELL) $${libsrcdir}/configure \
+ $(CONFIG_ARGUMENTS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ $(SHELL) $$s/configure \
+ $(CONFIG_ARGUMENTS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
+# To build a target all-X means to cd to X and make all.
+.PHONY: $(ALL_TARGET_MODULES)
+$(ALL_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/all-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(CHECK_TARGET_MODULES)
+$(CHECK_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/check-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/$${dir};$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+# This rule is used to install the modules which use
+# TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
+# and make install.
+.PHONY: $(INSTALL_TARGET_MODULES)
+$(INSTALL_TARGET_MODULES): installdirs
+ @dir=`echo $@ | sed -e 's/install-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/$${dir}; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+# This rule is used to build the modules which use X11_FLAGS_TO_PASS.
+# To build a target all-X means to cd to X and make all.
+.PHONY: $(ALL_X11_MODULES)
+$(ALL_X11_MODULES):
+ @dir=`echo $@ | sed -e 's/all-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; \
+ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# This rule is used to check the modules which use X11_FLAGS_TO_PASS.
+# To build a target check-X means to cd to X and make all.
+.PHONY: $(CHECK_X11_MODULES)
+$(CHECK_X11_MODULES):
+ @dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; \
+ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi
+
+# This rule is used to install the modules which use X11_FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(INSTALL_X11_MODULES)
+$(INSTALL_X11_MODULES):
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; \
+ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+# gcc is the only module which uses GCC_FLAGS_TO_PASS.
+.PHONY: all-gcc
+all-gcc:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: all-bootstrap
+all-bootstrap:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) bootstrap); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-gcc
+check-gcc:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi
+
+.PHONY: install-gcc
+install-gcc:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+# EXPERIMENTAL STUFF
+# This rule is used to install the modules which use FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: install-dosrel
+install-dosrel: installdirs info
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+install-dosrel-fake:
+
+
+# This is a list of inter-dependencies among modules.
+all-apache:
+all-autoconf: all-m4
+all-automake:
+all-bash:
+all-bfd:
+all-binutils: all-libiberty all-opcodes all-bfd all-flex all-byacc
+all-byacc:
+all-cvs:
+all-db:
+all-dejagnu: all-tcl all-expect all-tk
+all-diff: all-libiberty
+all-emacs:
+all-emacs19: all-byacc
+all-etc:
+configure-target-examples: $(ALL_GCC)
+all-target-examples: configure-target-examples
+all-expect: all-tcl all-tk
+all-fileutils: all-libiberty
+all-findutils:
+all-find:
+all-flex: all-libiberty all-byacc
+all-gas: all-libiberty all-opcodes all-bfd
+all-gash: all-tcl
+all-gawk:
+ALL_GCC = all-gcc
+all-gcc: all-byacc all-binutils all-gas all-ld
+all-bootstrap: all-libiberty all-byacc all-binutils all-gas all-ld
+GDB_TK = all-tk all-tcl
+all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
+all-gnuserv:
+configure-target-gperf: $(ALL_GCC)
+all-target-gperf: configure-target-gperf all-target-libiberty all-target-libg++
+all-gprof: all-libiberty all-bfd all-opcodes
+all-grep: all-libiberty
+all-grez: all-libiberty all-bfd all-opcodes
+all-gui: all-gdb all-libproc all-target-librx
+all-guile:
+all-gzip: all-libiberty
+all-hello: all-libiberty
+# start-sanitize-ide
+all-ilu:
+# end-sanitize-ide
+all-indent:
+all-inet: all-tcl all-send-pr all-perl
+all-ispell: all-emacs19
+all-itcl: all-tcl all-tk
+all-ld: all-libiberty all-bfd all-opcodes all-byacc all-flex
+configure-target-libg++: $(ALL_GCC) configure-target-librx
+all-target-libg++: configure-target-libg++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-librx all-target-libstdc++
+configure-target-libgloss: $(ALL_GCC)
+all-target-libgloss: configure-target-libgloss configure-target-newlib
+configure-target-libio: $(ALL_GCC)
+all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib
+all-libiberty:
+# start-sanitize-ide
+all-libide: all-tcl all-tk all-itcl all-ilu
+# end-sanitize-ide
+configure-target-librx: $(ALL_GCC) configure-target-newlib
+all-target-librx: configure-target-librx
+configure-target-libstdc++: $(ALL_GCC)
+all-target-libstdc++: configure-target-libstdc++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio
+all-m4: all-libiberty
+all-make: all-libiberty
+all-mmalloc:
+configure-target-newlib: $(ALL_GCC)
+all-target-newlib: configure-target-newlib all-binutils all-gas all-gcc
+all-opcodes: all-bfd all-libiberty
+all-patch: all-libiberty
+all-perl:
+all-prms: all-libiberty
+all-rcs:
+all-readline:
+all-recode: all-libiberty
+all-sed: all-libiberty
+all-send-pr: all-prms
+all-shellutils:
+all-sim: all-libiberty all-bfd all-opcodes
+all-sn: all-tcl all-tk all-itcl all-db all-grep
+all-tar: all-libiberty
+all-tcl:
+all-tclX: all-tcl all-tk
+all-tk: all-tcl
+all-texinfo: all-libiberty
+all-textutils:
+all-tgas: all-libiberty all-bfd all-opcodes
+all-time:
+# start-sanitize-ide
+all-vmake: all-tcl all-tk all-itcl all-libide
+# end-sanitize-ide
+all-wdiff:
+all-target-winsup: all-target-newlib all-target-libiberty all-target-librx all-target-libio configure-target-winsup
+configure-target-winsup: configure-target-newlib
+all-uudecode: all-libiberty
+configure-target-libiberty: $(ALL_GCC)
+all-target-libiberty: configure-target-libiberty all-gcc all-ld all-target-newlib
+all-target: $(ALL_TARGET_MODULES)
+install-target: $(INSTALL_TARGET_MODULES)
### other supporting targets
-# this is a bad hack.
-all.xclib: all.normal
- if [ -d clib ] ; then \
- (cd clib ; $(MAKE)) ; \
- fi
-
-subdir_do: force
- for i in $(DODIRS); do \
- if [ -f ./$$i/localenv ] ; then \
- if (rootme=`pwd` ; export rootme ; cd ./$$i; \
- $(MAKE) \
- "against=$(against)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- $(DO)) ; then true ; \
- else exit 1 ; fi ; \
- else if [ -d ./$$i ] ; then \
- if (rootme=`pwd` ; export rootme ; cd ./$$i; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" \
- "MAKEINFO=$(MAKEINFO)" \
- $(DO)) ; then true ; \
- else exit 1 ; fi ; \
- else true ; fi ; \
- fi ; \
- done
-
-bootstrap:
- $(MAKE) all info
- $(MAKE) stage1
- $(MAKE) pass "stagepass=stage1"
- $(MAKE) stage2
- $(MAKE) pass "stagepass=stage2"
- $(MAKE) comparison
-
-bootstrap2:
- $(MAKE) pass "stagepass=stage1"
- $(MAKE) stage2
- $(MAKE) pass "stagepass=stage2"
- $(MAKE) comparison
-
-bootstrap3:
- $(MAKE) pass "stagepass=stage2"
- $(MAKE) comparison
-
-pass:
- cp $(srcdir)/gcc/gstdarg.h ./gas/stdarg.h
- $(MAKE) subdir_do "DO=all info" "DODIRS=$(SUBDIRS)" \
- "CC=`pwd`/gcc/$(stagepass)/gcc \
- -O $(GCCVERBOSE) -I`pwd`/gcc/include \
- -B`pwd`/gcc/$(stagepass)/ \
- -B`pwd`/gas/$(stagepass)/ \
- -B`pwd`/ld/$(stagepass)/" \
- "AR=`pwd`/binutils/$(stagepass)/ar" \
- "LD=`pwd`/gcc/$(stagepass)/gcc $(GCCVERBOSE)" \
- "RANLIB=`pwd`/binutils/$(stagepass)/ranlib" \
- "LOADLIBES=`pwd`/libgcc/$(stagepass)/libgcc.a /lib/libc.a" \
- "LDFLAGS=-nostdlib /lib/crt0.o \
- -L`pwd`/libgcc/$(stagepass)/ \
- -B`pwd`/ld/$(stagepass)/"
-
-
-stage1:
- $(MAKE) subdir_do DO=stage1 "DODIRS=$(SUBDIRS)"
-
-stage2:
- $(MAKE) subdir_do DO=stage2 "DODIRS=$(SUBDIRS)"
-
-stage3:
- $(MAKE) subdir_do DO=stage3 "DODIRS=$(SUBDIRS)"
-
-stage4:
- $(MAKE) subdir_do DO=stage4 "DODIRS=$(SUBDIRS)"
-
-against=stage2
-
-comparison:; $(MAKE) subdir_do DO=comparison against=$(against) "DODIRS=$(SUBDIRS)"
-
-de-stage1:; $(MAKE) subdir_do DO=de-stage1 "DODIRS=$(SUBDIRS)"
-de-stage2:; $(MAKE) subdir_do DO=de-stage2 "DODIRS=$(SUBDIRS)"
-de-stage3:; $(MAKE) subdir_do DO=de-stage3 "DODIRS=$(SUBDIRS)"
-de-stage4:; $(MAKE) subdir_do DO=de-stage4 "DODIRS=$(SUBDIRS)"
-
-# The "else true" stuff is for Ultrix; the shell returns the exit code
-# of the "if" command, if no commands are run in the "then" or "else" part,
-# causing Make to quit.
MAKEDIRS= \
$(prefix) \
- $(exec_prefix) \
- $(bindir) \
- $(libdir) \
- $(tooldir) \
- $(includedir) \
- $(datadir) \
- $(docdir) \
- $(mandir) \
- $(man1dir) \
- $(man5dir)
-
-# $(man2dir) \
-# $(man3dir) \
-# $(man4dir) \
-# $(man6dir) \
-# $(man7dir) \
-# $(man8dir)
-
-install-dirs: force
- for i in $(MAKEDIRS) ; do \
- echo Making $$i... ; \
- [ -d $$i ] || mkdir $$i || exit 1 ; \
- done
-
-MAKEINFODIRS= \
- $(prefix) \
- $(infodir)
+ $(exec_prefix)
+.PHONY: installdirs
+installdirs: mkinstalldirs
+ $(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
-install-info-dirs: force
- if [ -d $(prefix) ] ; then true ; else mkdir $(prefix) ; fi
- if [ -d $(datadir) ] ; then true ; else mkdir $(datadir) ; fi
- if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; fi
+dir.info: do-install-info
+ if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
+ $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
+ mv -f dir.info.new dir.info ; \
+ else true ; \
+ fi
-dir.info: force
- $(srcdir)/texinfo/gen-info-dir $(infodir) > dir.info.new
- mv -f dir.info.new dir.info
+dist:
+ @echo "Building a full distribution of this tree isn't done"
+ @echo "via 'make dist'. Check out the etc/ subdirectory"
etags tags: TAGS
-TAGS: FORCE
- etags `$(MAKE) ls`
-
-ls:
- @echo Makefile
- @for i in $(SUBDIRS); \
- do \
- (cd $$i; \
- pwd=`pwd`; \
- wd=`basename $$pwd`; \
- for j in `$(MAKE) ls`; \
- do \
- echo $$wd/$$j; \
- done) \
- done
-
-force:
+# Right now this just builds TAGS in each subdirectory. emacs19 has the
+# ability to use several tags files at once, so there is probably no need
+# to combine them into one big TAGS file (like CVS 1.3 does). We could
+# (if we felt like it) have this Makefile write a piece of elisp which
+# the user could load to tell emacs19 where all the TAGS files we just
+# built are.
+TAGS: do-TAGS
# with the gnu make, this is done automatically.
-Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
+Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag)
$(SHELL) ./config.status
#
-# Build GDB distributions that contain BFD, Include, Libiberty, Readline, etc
-
-DEVO_SUPPORT= README cfg-paper.texi Makefile.in configure configure.in \
- config.sub config configure.man
-GDB_SUPPORT_DIRS= bfd include libiberty readline glob
-GDB_SUPPORT_FILES= $(GDB_SUPPORT_DIRS) texinfo/fsf/texinfo.tex
-
-setup-dirs: force_update
+# Support for building net releases
+
+# Files in devo used in any net release.
+# ChangeLog omitted because it may refer to files which are not in this
+# distribution (perhaps it would be better to include it anyway).
+DEVO_SUPPORT= README Makefile.in configure configure.in \
+ config.guess config.sub config move-if-change \
+ mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
+ COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
+ mkinstalldirs
+
+# Files in devo/etc used in any net release.
+# ChangeLog omitted because it may refer to files which are not in this
+# distribution (perhaps it would be better to include it anyway).
+ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
+ make-stds.texi standards.info*
+
+# When you use `make setup-dirs' or `make taz' you should always redefine
+# this macro.
+SUPPORT_FILES = list-of-support-files-for-tool-in-question
+
+.PHONY: taz
+
+taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \
+ texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
+ # Take out texinfo from a few places; make simple BISON=bison line.
+ sed -e '/^all\.normal: /s/\all-texinfo //' \
+ -e '/^ install-texinfo /d' \
+ -e '/^BISON = `if/,/^$$/d' \
+ -e '/^# BISON:/s/.*/BISON = $(DEFAULT_YACC)/' \
+ <Makefile.in >tmp
+ mv -f tmp Makefile.in
+ #
+ $(start-sanitize-Sanitize)
+ @if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ;
+ $(end-sanitize-Sanitize)
./configure sun4
- make clean
- ./configure -rm sun4
- chmod og=u `find $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) -print`
-
-bfd.ilrt.tar.Z: setup-dirs
- rm -f bfd.ilrt.tar.Z
- tar cf - $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) \
- | compress -v >bfd.ilrt.tar.Z
-
-gdb.tar.Z: setup-dirs
- (cd gdb; $(MAKE) -f Makefile.in make-proto-gdb.dir)
- $(MAKE) $(MFLAGS) -f Makefile.in make-gdb.tar.Z
-
-make-gdb.tar.Z: $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS) gdb texinfo/fsf/texinfo.tex
- rm -rf proto-toplev; mkdir proto-toplev
- ln -s ../gdb/proto-gdb.dir proto-toplev/gdb
- (cd proto-toplev; for i in $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS); do \
- ln -s ../$$i . ; \
- done)
- # Put only one copy (four hard links) of COPYING in the tar file.
- rm proto-toplev/bfd/COPYING
- ln proto-toplev/gdb/COPYING proto-toplev/bfd/COPYING
- rm proto-toplev/include/COPYING
- ln proto-toplev/gdb/COPYING proto-toplev/include/COPYING
- rm proto-toplev/readline/COPYING
- ln proto-toplev/gdb/COPYING proto-toplev/readline/COPYING
+ [ -z "$(CONFIGURE_TARGET_MODULES)" ] \
+ || $(MAKE) $(CONFIGURE_TARGET_MODULES) ALL_GCC="" \
+ CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
+ # Make links, and run "make diststuff" or "make info" when needed.
+ rm -rf proto-toplev ; mkdir proto-toplev
+ set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
+ for d in $$dirs ; do \
+ if [ -d $$d ]; then \
+ if [ ! -f $$d/Makefile ] ; then true ; \
+ elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
+ (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
+ elif grep '^info:' $$d/Makefile >/dev/null ; then \
+ (cd $$d ; $(MAKE) info ) || exit 1 ; \
+ fi ; \
+ if [ -d $$d/proto-$$d.dir ]; then \
+ ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
+ else \
+ ln -s ../$$d proto-toplev/$$d ; \
+ fi ; \
+ else ln -s ../$$d proto-toplev/$$d ; fi ; \
+ done
+ cd etc ; $(MAKE) info
+ $(MAKE) distclean
+ #
+ mkdir proto-toplev/etc
+ (cd proto-toplev/etc; \
+ for i in $(ETC_SUPPORT); do \
+ ln -s ../../etc/$$i . ; \
+ done)
+ #
# Take out texinfo from configurable dirs
rm proto-toplev/configure.in
- sed '/^configdirs=/s/texinfo //' <configure.in >proto-toplev/configure.in
- # Take out glob from buildable dirs
- rm proto-toplev/Makefile.in
- sed '/^SUBDIRS =/s/glob //' <Makefile.in >proto-toplev/Makefile.in
- # Take out texinfo from buildable dirs
- cp proto-toplev/Makefile.in temp.$$
- sed '/^all\.normal: /s/all-texinfo //' <temp.$$ >temp1.$$
- sed '/^clean: /s/clean-texinfo //' <temp1.$$ >temp.$$
- sed '/^install\.all: /s/install-texinfo //' <temp.$$ >proto-toplev/Makefile.in
- rm temp.$$ temp1.$$
+ sed -e '/^host_tools=/s/texinfo //' \
+ <configure.in >proto-toplev/configure.in
+ #
mkdir proto-toplev/texinfo
- mkdir proto-toplev/texinfo/fsf
- ln -s ../../../texinfo/fsf/texinfo.tex proto-toplev/texinfo/fsf/
- chmod og=u `find proto-toplev -print`
- (VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
- echo "==> Making gdb-$$VER.tar.Z"; \
- ln -s proto-toplev gdb-$$VER; \
- tar cfh - gdb-$$VER \
- | compress -v >gdb-$$VER.tar.Z)
-
-force_update:
-
-nothing:
+ ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
+ ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
+ ln -s ../../texinfo/lgpl.texinfo proto-toplev/texinfo/
+ if test -r texinfo/util/tex3patch ; then \
+ mkdir proto-toplev/texinfo/util && \
+ ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
+ else true; fi
+ chmod og=u `find . -print`
+ $(MAKE) -f Makefile.in do-tar-gz TOOL=$(TOOL) \
+ VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`
+
+do-tar-gz:
+ echo "==> Making $(TOOL)-$(VER).tar.gz"
+ -rm -f $(TOOL)-$(VER)
+ ln -s proto-toplev $(TOOL)-$(VER)
+ tar cfh $(TOOL)-$(VER).tar $(TOOL)-$(VER)
+ $(GZIPPROG) -v -9 $(TOOL)-$(VER).tar
+
+TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
+DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
+
+.PHONY: gas.tar.gz
+GAS_SUPPORT_DIRS= bfd include libiberty opcodes setup.com makefile.vms
+gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
+ $(MAKE) -f Makefile.in taz TOOL=gas \
+ SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
+
+# The FSF "binutils" release includes gprof and ld.
+.PHONY: binutils.tar.gz
+BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof setup.com makefile.vms
+binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
+ $(MAKE) -f Makefile.in taz TOOL=binutils \
+ SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
+
+.PHONY: gas+binutils.tar.gz
+GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
+gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
+ $(MAKE) -f Makefile.in taz TOOL=gas \
+ SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
+
+.PHONY: libg++.tar.gz
+LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty
+libg++.tar.gz: $(DIST_SUPPORT) libg++
+ $(MAKE) -f Makefile.in taz TOOL=libg++ \
+ SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
+
+GNATS_SUPPORT_DIRS=include libiberty send-pr
+gnats.tar.gz: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
+ $(MAKE) -f Makefile.in taz TOOL=gnats \
+ SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
+
+.PHONY: gdb.tar.gz
+GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils
+GDBTK_SUPPORT_DIRS= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi`
+gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in taz TOOL=gdb \
+ SUPPORT_FILES="$(GDB_SUPPORT_DIRS) $(GDBTK_SUPPORT_DIRS)"
+
+.PHONY: newlib.tar.gz
+NEWLIB_SUPPORT_DIRS=libgloss
+# taz configures for the sun4 target which won't configure newlib.
+# We need newlib configured so that the .info files are made.
+# Unfortunately, it is not enough to just configure newlib separately:
+# taz will build the .info files but since SUBDIRS won't contain newlib,
+# distclean won't be run (leaving Makefile, config.status, and the tmp files
+# used in building the .info files, eg: *.def, *.ref).
+# The problem isn't solvable however without a lot of extra work because
+# target libraries are built in subdir $(target_alias) which gets nuked during
+# the make distclean. For now punt on the issue of shipping newlib info files
+# with newlib net releases and wait for a day when some native target (sun4?)
+# supports newlib (if only minimally).
+newlib.tar.gz: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
+ $(MAKE) -f Makefile.in taz TOOL=newlib \
+ SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
+ DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
+
+.NOEXPORT:
+MAKEOVERRIDES=
+
+# start-sanitize-chill
+## This is ugly, but I don't want GNU make to put these variables in
+## the environment. Older makes will see this as a set of targets
+## with no dependencies and no actions.
+unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
+# end-sanitize-chill
# end of Makefile.in
projects / deliverable / binutils-gdb.git / blobdiff