#
# Makefile for directory with subdirs to build.
-# Copyright (C) 1990, 91, 92, 93, 94, 95, 96, 97, 1998
-# Free Software Foundation
+# Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+# 1999, 2000, 2001 Free Software Foundation
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
+# Tell GNU make 3.79 not to run the top level in parallel. This
+# prevents contention for $builddir/$target/config.cache, as well
+# as minimizing scatter in file system caches.
+NOTPARALLEL = .NOTPARALLEL
+$(NOTPARALLEL):
+
srcdir = .
prefix = /usr/local
LDFLAGS =
LIBCFLAGS = $(CFLAGS)
+CFLAGS_FOR_BUILD = $(CFLAGS)
CFLAGS_FOR_TARGET = $(CFLAGS)
LDFLAGS_FOR_TARGET =
LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
-RANLIB = ranlib
-
DLLTOOL = dlltool
WINDRES = windres
then echo $$r/m4/m4 ; \
else echo ${DEFAULT_M4} ; fi`
-MAKEINFO = `if [ -f $$r/texinfo/makeinfo/Makefile ] ; \
+# For an installed makeinfo, we require it to be from texinfo 4 or
+# higher, else we use the "missing" dummy.
+MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
then echo $$r/texinfo/makeinfo/makeinfo ; \
- else echo makeinfo ; fi`
+ else if (makeinfo --version \
+ | egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \
+ then echo makeinfo; else echo $$s/missing makeinfo; fi; fi`
# This just becomes part of the MAKEINFO definition passed down to
# sub-makes. It lets flags be given on the command line while still
# This is set by the configure script to the list of directories which
# should be built using the target tools.
-TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib libio librx libstdc++ libg++ winsup opcodes bsp libstub cygmon libf2c libchill libobjc
+TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib librx winsup opcodes bsp libstub cygmon libf2c libchill libobjc
# Target libraries are put under this directory:
# Changed by configure to $(target_alias) if cross.
TARGET_SUBDIR = .
-# This is set by the configure script to the arguments passed to configure.
-CONFIG_ARGUMENTS =
+BUILD_CONFIGDIRS = libiberty
+BUILD_SUBDIR = .
+
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the target.
+TARGET_CONFIGARGS =
+
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the build system.
+BUILD_CONFIGARGS =
# This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
# was used.
# the libraries. This may be changed by configure.in.
RPATH_ENVVAR = LD_LIBRARY_PATH
+# This is the list of directories that may be needed in RPATH_ENVVAR
+# so that programs built for the host machine work.
+HOST_LIB_PATH = $$r/bfd:$$r/opcodes
+
+# This is the list of directories that may be needed in RPATH_ENVVAR
+# so that prorgams built for the target machine work.
+TARGET_LIB_PATH = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs:
+
# configure.in sets SET_LIB_PATH to this if --enable-shared was used.
+# Some platforms don't like blank entries, so we remove duplicate,
+# leading and trailing colons.
REALLY_SET_LIB_PATH = \
- if [ x"$$$(RPATH_ENVVAR)" != x ]; then \
- $(RPATH_ENVVAR)=$$r/bfd:$$r/opcodes:$$$(RPATH_ENVVAR); \
- else \
- $(RPATH_ENVVAR)=$$r/bfd:$$r/opcodes; \
- fi; \
- export $(RPATH_ENVVAR);
+ $(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH):$(TARGET_LIB_PATH):$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR);
ALL = all.normal
INSTALL_TARGET = installdirs \
$(INSTALL_X11_MODULES) \
$(INSTALL_DOSREL)
-CC_FOR_TARGET = ` \
- if [ -f $$r/gcc/xgcc ] ; then \
- if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
- case "$(target_canonical)" in \
- i[3456]86-*-cygwin*) \
- echo $$r/gcc/xgcc -B$(build_tooldir)/bin/ -B$$r/$(TARGET_SUBDIR)/newlib/ -B$$r/gcc/ -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/winsup/include -idirafter $$s/winsup/cygwin/include -idirafter $$s/winsup/w32api/include -idirafter $$s/newlib/libc/include -idirafter $$s/newlib/libc/sys/cygwin -idirafter $$s/newlib/libc/sys/cygwin32 -nostdinc; \
- ;; \
- *) \
- echo $$r/gcc/xgcc -B$(build_tooldir)/bin/ -B$$r/$(TARGET_SUBDIR)/newlib/ -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
- ;; \
- esac \
- else \
- echo $$r/gcc/xgcc -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -B$$r/gcc/ -isystem $(build_tooldir)/include; \
- fi; \
- else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
- echo $(CC); \
- else \
- t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
- fi; \
- fi`
+# Should be substed by configure.in
+FLAGS_FOR_TARGET =
+CC_FOR_TARGET =
+CHILL_FOR_TARGET =
+CXX_FOR_TARGET =
+CXX_FOR_TARGET_FOR_RECURSIVE_MAKE =
+GCJ_FOR_TARGET =
-# If CC_FOR_TARGET is not overriden on the command line, then this
+# If GCC_FOR_TARGET is not overriden on the command line, then this
# variable is passed down to the gcc Makefile, where it is used to
# build libgcc2.a. We define it here so that it can itself be
# overridden on the command line.
-GCC_FOR_TARGET = $$r/gcc/xgcc -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -B$$r/gcc/ -isystem $(build_tooldir)/include
-
-CHILL_FOR_TARGET = ` \
- if [ -f $$r/gcc/xgcc ] ; then \
- echo $$r/gcc/xgcc -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \
- else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
- echo $(CC); \
- else \
- t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
- fi; \
- fi`
-
-CXX_FOR_TARGET = ` \
- if [ -f $$r/gcc/g++ ] ; then \
- if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
- case "$(target_canonical)" in \
- i[3456]86-*-cygwin*) \
- echo $$r/gcc/g++ -B$(build_tooldir)/bin/ -B$$r/$(TARGET_SUBDIR)/newlib/ -B$$r/gcc/ -L$$r/$(TARGET_SUBDIR)/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/winsup/cygwin/include -idirafter $$s/winsup/w32api/include -idirafter $$s/newlib/libc/include -idirafter $$s/newlib/libc/sys/cygwin -idirafter $$s/newlib/libc/sys/cygwin32 -nostdinc -L$$r/$(TARGET_SUBDIR)/libstdc++; \
- ;; \
- *) \
- echo $$r/gcc/g++ -B$(build_tooldir)/bin/ -B$$r/$(TARGET_SUBDIR)/newlib/ -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc -L$$r/$(TARGET_SUBDIR)/libstdc++; \
- ;; \
- esac \
- else \
- echo $$r/gcc/g++ -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -B$$r/gcc/ -isystem $(build_tooldir)/include -L$$r/$(TARGET_SUBDIR)/libstdc++; \
- fi; \
- else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
- echo $(CXX); \
- else \
- t='$(program_transform_name)'; echo c++ | sed -e 's/x/x/' $$t; \
- fi; \
- fi`
+GCC_FOR_TARGET = $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
AS_FOR_TARGET = ` \
if [ -f $$r/gas/as-new ] ; then \
echo $$r/gas/as-new ; \
+ elif [ -f $$r/gcc/xgcc ]; then \
+ $(CC_FOR_TARGET) -print-prog-name=as ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(AS); \
else \
t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
LD_FOR_TARGET = ` \
if [ -f $$r/ld/ld-new ] ; then \
echo $$r/ld/ld-new ; \
+ elif [ -f $$r/gcc/xgcc ]; then \
+ $(CC_FOR_TARGET) -print-prog-name=ld ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(LD); \
else \
t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
if [ -f $$r/binutils/dlltool ] ; then \
echo $$r/binutils/dlltool ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(DLLTOOL); \
else \
t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
if [ -f $$r/binutils/windres ] ; then \
echo $$r/binutils/windres ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(WINDRES); \
else \
t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \
if [ -f $$r/binutils/ar ] ; then \
echo $$r/binutils/ar ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(AR); \
else \
t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
if [ -f $$r/binutils/ranlib ] ; then \
echo $$r/binutils/ranlib ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
- echo $(RANLIB); \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+ if [ x'$(RANLIB)' != x ]; then \
+ echo $(RANLIB); \
+ else \
+ echo ranlib; \
+ fi; \
else \
t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
fi; \
NM_FOR_TARGET = ` \
if [ -f $$r/binutils/nm-new ] ; then \
echo $$r/binutils/nm-new ; \
+ elif [ -f $$r/gcc/xgcc ]; then \
+ $(CC_FOR_TARGET) -print-prog-name=nm ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(NM); \
else \
t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
"CHILLFLAGS=$(CHILLFLAGS)" \
"CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
"CHILL_LIB=$(CHILL_LIB)" \
+ "GCJ_FOR_TARGET=$(GCJ_FOR_TARGET)" \
"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
"CXXFLAGS=$(CXXFLAGS)" \
"CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
"libdir=$(libdir)" \
"libexecdir=$(libexecdir)" \
"lispdir=$(lispdir)" \
+ "libstdcxx_incdir=$(libstdcxx_incdir)" \
+ "libsubdir=$(libsubdir)" \
"localstatedir=$(localstatedir)" \
"mandir=$(mandir)" \
"oldincludedir=$(oldincludedir)" \
"gxx_include_dir=$(gxx_include_dir)" \
"gcc_version=$(gcc_version)" \
"gcc_version_trigger=$(gcc_version_trigger)" \
- "target_alias=$(target_alias)" \
- "libsubdir=$(libsubdir)"
+ "target_alias=$(target_alias)"
+
+# For any flags above that may contain shell code that varies from one
+# target library to another. When doing recursive invocations of the
+# top-level Makefile, we don't want the outer make to evaluate them,
+# so we pass these variables down unchanged. They must not contain
+# single nor double quotes.
+RECURSE_FLAGS = \
+ CXX_FOR_TARGET='$(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)'
# Flags to pass down to most sub-makes, in which we're building with
# the host environment.
'DLLTOOL=$(DLLTOOL)' \
'LD=$(LD)' \
'NM=$(NM)' \
- 'RANLIB=$(RANLIB)' \
+ "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
'WINDRES=$(WINDRES)'
FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
'HOST_PREFIX=$(HOST_PREFIX)' \
'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
'NM=$(NM)' \
- 'RANLIB=$(RANLIB)' \
+ "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
'WINDRES=$$(WINDRES_FOR_TARGET)' \
"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
+ "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
"`echo 'LANGUAGES=$(LANGUAGES)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'ENQUIRE=$(ENQUIRE)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'STAGE1_CFLAGS=$(STAGE1_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)' | sed -e s/.*=$$/XFOO=/`"
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
+# This is a list of the targets for all of the modules which are compiled
+# using the build machine's native compiler. Configure edits the second
+# macro for build!=host builds.
+ALL_BUILD_MODULES_LIST = \
+ all-build-libiberty
+ALL_BUILD_MODULES =
+
+# This is a list of the configure targets for all of the modules which
+# are compiled using the native tools.
+CONFIGURE_BUILD_MODULES = \
+ configure-build-libiberty
+
# This is a list of the targets for all of the modules which are compiled
# using $(FLAGS_TO_PASS).
ALL_MODULES = \
all-bison \
all-byacc \
all-bzip2 \
+ all-cgen \
all-cvssrc \
all-db \
all-dejagnu \
all-diff \
all-dosutils \
all-etc \
+ all-fastjar \
all-fileutils \
all-findutils \
all-find \
all-sed \
all-send-pr \
all-shellutils \
+ all-sid \
all-sim \
all-snavigator \
all-tar \
all-uudecode \
all-wdiff \
all-zip \
+ all-zlib \
$(EXTRA_TARGET_HOST_ALL_MODULES)
# This is a list of the check targets for all of the modules which are
NATIVE_CHECK_MODULES = \
check-bison \
check-byacc \
+ check-fastjar \
check-flex \
check-zip
check-bfd \
check-binutils \
check-bzip2 \
+ check-cgen \
check-cvssrc \
check-db \
check-dejagnu \
check-send-pr \
check-shellutils \
check-snavigator \
+ check-sid \
check-sim \
check-tar \
check-tcl \
install-binutils \
install-bison \
install-byacc \
+ install-cgen \
install-cvssrc \
install-db \
install-dejagnu \
install-diff \
install-dosutils \
install-etc \
+ install-fastjar \
install-fileutils \
install-findutils \
install-find \
install-sed \
install-send-pr \
install-shellutils \
+ install-sid \
install-sim \
install-snavigator \
install-tar \
# This is a list of the targets for all of the modules which are compiled
# using $(TARGET_FLAGS_TO_PASS).
ALL_TARGET_MODULES = \
- all-target-libio \
- all-target-libstdc++ \
all-target-libstdc++-v3 \
all-target-librx \
- all-target-libg++ \
all-target-newlib \
all-target-libf2c \
all-target-libchill \
# This is a list of the configure targets for all of the modules which
# are compiled using the target tools.
CONFIGURE_TARGET_MODULES = \
- configure-target-libio \
- configure-target-libstdc++ \
configure-target-libstdc++-v3 \
configure-target-librx \
- configure-target-libg++ \
configure-target-newlib \
configure-target-libf2c \
configure-target-libchill \
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
CHECK_TARGET_MODULES = \
- check-target-libio \
- check-target-libstdc++ \
check-target-libstdc++-v3 \
- check-target-libg++ \
check-target-newlib \
check-target-libf2c \
check-target-libchill \
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
INSTALL_TARGET_MODULES = \
- install-target-libio \
- install-target-libstdc++ \
install-target-libstdc++-v3 \
- install-target-libg++ \
install-target-newlib \
install-target-libf2c \
install-target-libchill \
clean-bison \
clean-byacc \
clean-bzip2 \
+ clean-cgen \
clean-cvssrc \
clean-db \
clean-dejagnu \
clean-diff \
clean-dosutils \
clean-etc \
+ clean-fastjar \
clean-fileutils \
clean-findutils \
clean-find \
clean-sed \
clean-send-pr \
clean-shellutils \
+ clean-sid \
clean-sim \
clean-snavigator \
clean-tar \
clean-time \
clean-uudecode \
clean-wdiff \
- clean-zip
+ clean-zip \
+ clean-zlib
# All of the target modules that can be cleaned
CLEAN_TARGET_MODULES = \
- clean-target-libio \
- clean-target-libstdc++ \
clean-target-libstdc++-v3 \
clean-target-librx \
- clean-target-libg++ \
clean-target-newlib \
clean-target-libf2c \
clean-target-libchill \
# The target built for a native build.
.PHONY: all.normal
all.normal: \
+ $(ALL_BUILD_MODULES) \
$(ALL_MODULES) \
$(ALL_X11_MODULES) \
$(ALL_TARGET_MODULES) \
case $$i in \
gcc) \
for flag in $(EXTRA_GCC_FLAGS); do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
;; \
*) \
for flag in $(EXTRA_HOST_FLAGS); do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
;; \
esac ; \
- export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
if (cd ./$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
$${target}); \
then true; else exit 1; fi; \
for i in $(TARGET_CONFIGDIRS) -dummy-; do \
if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
for flag in $(EXTRA_TARGET_FLAGS); do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
- export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
if (cd $(TARGET_SUBDIR)/$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
$${target}); \
then true; else exit 1; fi; \
-if [ "$(TARGET_SUBDIR)" != "." ]; then \
rm -rf $(TARGET_SUBDIR); \
else true; fi
+ -rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile
+ -rm -f texinfo/doc/Makefile texinfo/po/POTFILES
+ -rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null
+ -rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null
+ -rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null
local-maintainer-clean:
@echo "This command is intended for maintainers to use;"
true; \
fi
-clean-target: $(CLEAN_TARGET_MODULES)
+clean-target: $(CLEAN_TARGET_MODULES) clean-target-libgcc
+clean-target-libgcc:
+ test ! -d gcc/libgcc || \
+ (cd gcc/libgcc && find . -type d -print) | \
+ while read d; do rm -f gcc/$$d/libgcc.a || : ; done
+ -rm -rf gcc/libgcc
# Check target.
-.PHONY: check
-check: $(CHECK_MODULES) \
+.PHONY: check do-check
+check:
+ $(MAKE) do-check NOTPARALLEL=parallel-ok
+
+do-check: $(CHECK_MODULES) \
$(CHECK_TARGET_MODULES) \
$(CHECK_X11_MODULES) \
check-gcc
mv gcc/tmp-include gcc/include 2>/dev/null; \
else true; fi
+# This rule is used to build the modules which are built with the
+# build machine's native compiler.
+.PHONY: $(ALL_BUILD_MODULES)
+$(ALL_BUILD_MODULES):
+ dir=`echo $@ | sed -e 's/all-build-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ (cd $(BUILD_SUBDIR)/$${dir} && $(MAKE) all); \
+ else \
+ true; \
+ fi
+
+# This rule is used to configure the modules which are built with the
+# native tools.
+.PHONY: $(CONFIGURE_BUILD_MODULES)
+$(CONFIGURE_BUILD_MODULES):
+ @dir=`echo $@ | sed -e 's/configure-build-//'`; \
+ if [ ! -d $(BUILD_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(BUILD_SUBDIR)/$${dir}/Makefile ] ; then \
+ true; \
+ elif echo " $(BUILD_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/$${dir} ]; then \
+ [ -d $(BUILD_SUBDIR)/$${dir} ] || mkdir $(BUILD_SUBDIR)/$${dir};\
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ AR="$(AR_FOR_BUILD)"; export AR; \
+ AS="$(AS_FOR_BUILD)"; export AS; \
+ CC="$(CC_FOR_BUILD)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \
+ CXX="$(CXX_FOR_BUILD)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
+ LD="$(LD_FOR_BUILD)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
+ NM="$(NM_FOR_BUILD)"; export NM; \
+ RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \
+ echo Configuring in $(BUILD_SUBDIR)/$${dir}; \
+ cd "$(BUILD_SUBDIR)/$${dir}" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(BUILD_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(BUILD_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/$${dir}"; \
+ libsrcdir="$$s/$${dir}"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(BUILD_CONFIGARGS) $${srcdiroption} \
+ --with-build-subdir="$(BUILD_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(BUILD_CONFIGARGS) $${srcdiroption} \
+ --with-build-subdir="$(BUILD_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir $${dir} || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
# This rule is used to build the modules which use FLAGS_TO_PASS. To
# build a target all-X means to cd to X and make all.
#
.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
$(NATIVE_CHECK_MODULES):
- @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ @if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
- cd $(TARGET_SUBDIR)/$${dir}; \
+ cd "$(TARGET_SUBDIR)/$${dir}" || exit 1; \
case $(srcdir) in \
- /*) \
+ /* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
if [ -f $${libsrcdir}/configure ] ; then \
rm -f no-such-file skip-this-dir; \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
- $(CONFIG_ARGUMENTS) $${srcdiroption} \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)"; \
else \
rm -f no-such-file skip-this-dir; \
CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
- $(CONFIG_ARGUMENTS) $${srcdiroption} \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)"; \
- fi; \
+ fi || exit 1; \
if [ -f skip-this-dir ] ; then \
sh skip-this-dir; \
rm -f skip-this-dir; \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ (cd $(TARGET_SUBDIR)/$${dir}; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
else \
true; \
fi
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir};$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ (cd $(TARGET_SUBDIR)/$${dir}; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
else \
true; \
fi
# in parallel.
#
.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean
-bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
+bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean: all-bootstrap
@r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
echo "Bootstrapping the compiler"; \
- cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) $@
+ cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $@
@r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
case "$@" in \
esac; \
$(SET_LIB_PATH) \
echo "$$msg"; \
- cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) $$compare
+ cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $$compare
@r=`pwd`; export r; \
s=`cd $(srcdir); pwd` ; export s; \
$(SET_LIB_PATH) \
echo "Building runtime libraries"; \
- $(MAKE) $(BASE_FLAGS_TO_PASS) all
+ $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all
.PHONY: cross
cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
echo "Building the C and C++ compiler"; \
- cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++"
+ cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++"
@r=`pwd`; export r; \
s=`cd $(srcdir); pwd` ; export s; \
$(SET_LIB_PATH) \
echo "Building runtime libraries"; \
- $(MAKE) $(BASE_FLAGS_TO_PASS) all LANGUAGES="c c++"
+ $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) \
+ LANGUAGES="c c++" all
.PHONY: check-gcc
check-gcc:
true; \
fi
+.PHONY: check-c++
+check-c++:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
+ $(MAKE) check-target-libstdc++-v3; \
+ else \
+ true; \
+ fi
+
.PHONY: install-gcc
install-gcc:
@if [ -f ./gcc/Makefile ] ; then \
install-dosrel-fake:
+ALL_GCC = all-gcc
+ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss
+ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++-v3
# This is a list of inter-dependencies among modules.
all-apache:
all-bfd: all-libiberty all-intl
all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc all-intl
all-bison: all-texinfo
-configure-target-boehm-gc: configure-target-newlib configure-target-qthreads
+configure-target-boehm-gc: $(ALL_GCC_C) configure-target-qthreads
all-target-boehm-gc: configure-target-boehm-gc
-configure-target-bsp: $(ALL_GCC)
-all-target-bsp: configure-target-bsp all-gcc all-binutils all-target-newlib
+configure-target-bsp: $(ALL_GCC_C)
+all-target-bsp: configure-target-bsp
all-byacc:
all-bzip2:
+all-cgen: all-libiberty
all-cvssrc:
-configure-target-cygmon: $(ALL_GCC)
-all-target-cygmon: configure-target-cygmon all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-libstub all-target-bsp
+configure-target-cygmon: $(ALL_GCC_C)
+all-target-cygmon: configure-target-cygmon all-target-libiberty all-target-libstub all-target-bsp
all-db:
all-dejagnu: all-tcl all-expect all-tk
all-diff: all-libiberty
all-emacs:
all-emacs19: all-bison all-byacc
all-etc:
-configure-target-examples: $(ALL_GCC)
+configure-target-examples: $(ALL_GCC_C)
all-target-examples: configure-target-examples
all-expect: all-tcl all-tk
all-fileutils: all-libiberty
all-gas: all-libiberty all-opcodes all-bfd all-intl
all-gash: all-tcl
all-gawk:
-ALL_GCC = all-gcc
-all-gcc: all-bison all-byacc all-binutils all-gas all-ld
-all-bootstrap: all-libiberty all-bison all-byacc all-binutils all-gas all-ld
+all-gcc: all-bison all-byacc all-binutils all-gas all-ld all-zlib
+all-bootstrap: all-libiberty all-texinfo all-bison all-byacc all-binutils all-gas all-ld all-zlib
GDB_TK = all-tk all-tcl all-itcl all-tix all-libgui
all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-bison all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
all-gettext:
all-gnuserv:
-configure-target-gperf: $(ALL_GCC)
-all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++
+configure-target-gperf: $(ALL_GCC_CXX)
+all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++-v3
all-gprof: all-libiberty all-bfd all-opcodes all-intl
all-grep: all-libiberty
all-grez: all-libiberty all-bfd all-opcodes
all-ispell: all-emacs19
all-itcl: all-tcl all-tk all-tcl8.1 all-tk8.1
all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex all-intl
-configure-target-libg++: $(ALL_GCC) configure-target-librx
-all-target-libg++: configure-target-libg++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-librx all-target-libstdc++
configure-target-libgloss: $(ALL_GCC)
all-target-libgloss: configure-target-libgloss configure-target-newlib
-configure-target-libio: $(ALL_GCC)
-all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib
-check-target-libio:
all-libgui: all-tcl all-tk all-tcl8.1 all-tk8.1 all-itcl
all-libiberty:
-configure-target-libffi: $(ALL_GCC)
-configure-target-libjava: $(ALL_GCC) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-newlib configure-target-libffi
+
+all-build-libiberty: configure-build-libiberty
+
+configure-target-libffi: $(ALL_GCC_C)
all-target-libffi: configure-target-libffi
-all-target-libjava: configure-target-libjava all-gcc all-zip all-target-newlib all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi
-configure-target-librx: $(ALL_GCC) configure-target-newlib
+configure-target-libjava: $(ALL_GCC_C) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi
+all-target-libjava: configure-target-libjava all-fastjar all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi
+configure-target-librx: $(ALL_GCC_C)
all-target-librx: configure-target-librx
-configure-target-libstdc++: $(ALL_GCC)
-configure-target-libstdc++-v3: $(ALL_GCC)
-all-target-libstdc++: configure-target-libstdc++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio
-all-target-libstdc++-v3: configure-target-libstdc++-v3 all-gas all-ld all-gcc all-target-libiberty all-target-newlib
-configure-target-libstub: $(ALL_GCC)
+configure-target-libstdc++-v3: $(ALL_GCC_C)
+all-target-libstdc++-v3: configure-target-libstdc++-v3 all-target-libiberty
+configure-target-libstub: $(ALL_GCC_C)
all-target-libstub: configure-target-libstub
all-libtool:
-all-target-libf2c: configure-target-libf2c all-gas all-ld all-gcc all-target-libiberty all-target-newlib
-all-target-libchill: configure-target-libchill all-gas all-ld all-gcc all-target-libiberty all-target-newlib
-all-target-libobjc: configure-target-libobjc all-gas all-ld all-gcc all-target-libiberty all-target-newlib
-all-m4: all-libiberty
+configure-target-libf2c: $(ALL_GCC_C)
+all-target-libf2c: configure-target-libf2c all-target-libiberty
+configure-target-libchill: $(ALL_GCC_C)
+all-target-libchill: configure-target-libchill all-target-libiberty
+configure-target-libobjc: $(ALL_GCC_C)
+all-target-libobjc: configure-target-libobjc all-target-libiberty
+all-m4: all-libiberty all-texinfo
all-make: all-libiberty
all-mmalloc:
configure-target-newlib: $(ALL_GCC)
-configure-target-libtermcap: $(ALL_GCC)
-all-target-newlib: configure-target-newlib all-binutils all-gas all-gcc
-all-target-libtermcap: configure-target-libtermcap all-binutils all-gas all-gcc
-all-opcodes: all-bfd all-libiberty
+all-target-newlib: configure-target-newlib
+configure-target-libtermcap: $(ALL_GCC_C)
+all-target-libtermcap: configure-target-libtermcap
+all-opcodes: all-bfd all-libiberty all-cgen
all-patch: all-libiberty
all-perl:
all-prms: all-libiberty
-configure-target-qthreads: configure-target-newlib
+configure-target-qthreads: $(ALL_GCC_C)
all-target-qthreads: configure-target-qthreads
all-rcs:
all-readline:
all-sed: all-libiberty
all-send-pr: all-prms
all-shellutils:
-all-sim: all-libiberty all-bfd all-opcodes all-readline
-all-snavigator: all-tcl all-tk all-itcl all-db all-grep all-libgui
+all-sid: all-tcl all-tk
+all-sim: all-libiberty all-bfd all-opcodes all-readline all-cgen
+all-snavigator: all-tcl all-tk all-itcl all-tix all-db all-grep all-libgui
all-tar: all-libiberty
all-tcl:
all-tcl8.1:
all-time:
all-tix: all-tcl all-tk all-tcl8.1 all-tk8.1
all-wdiff:
-all-target-winsup: all-target-newlib all-target-libiberty all-target-libtermcap configure-target-winsup
-configure-target-winsup: configure-target-newlib
+configure-target-winsup: $(ALL_GCC_C)
+all-target-winsup: all-target-libiberty all-target-libtermcap configure-target-winsup
all-uudecode: all-libiberty
all-zip:
-configure-target-zlib: $(ALL_GCC)
+all-zlib:
+configure-target-zlib: $(ALL_GCC_C)
all-target-zlib: configure-target-zlib
-configure-target-libiberty: $(ALL_GCC) configure-target-newlib
-all-target-libiberty: configure-target-libiberty all-gcc all-ld all-target-newlib
+all-fastjar: all-zlib all-libiberty
+configure-target-fastjar: configure-target-zlib
+all-target-fastjar: configure-target-fastjar all-target-zlib all-target-libiberty
+configure-target-libiberty: $(ALL_GCC_C)
+all-target-libiberty: configure-target-libiberty
all-target: $(ALL_TARGET_MODULES)
install-target: $(INSTALL_TARGET_MODULES)
install-gdb: install-tcl install-tk install-itcl install-tix install-libgui
+install-sid: install-tcl install-tk
### other supporting targets
MAKEDIRS= \
config.guess config.if config.sub config move-if-change \
mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
- mkinstalldirs ltconfig ltmain.sh missing ylwrap
+ mkinstalldirs ltconfig ltmain.sh missing ylwrap \
+ libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh
# Files in devo/etc used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
- make-stds.texi standards.info*
+ make-stds.texi standards.info* configure.texi configure.info* \
+ configbuild.* configdev.*
+
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
# NOTE: No double quotes in the below. It is used within shell script
# as VER="$(VER)"
-VER = ` if grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
+VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
+ sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
+ elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
- else \
+ elif test -f $(TOOL)/version.in; then \
+ head -1 $(TOOL)/version.in; \
+ elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
+ else \
+ echo VERSION; \
fi`
PACKAGE = $(TOOL)
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-tar-bz2 \
+ $(MAKE) -f Makefile.in do-tar \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+ $(MAKE) -f Makefile.in do-bz2 \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
-.PHONY: gdb-taz
-gdb-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+.PHONY: gdb-tar
+gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
$(MAKE) -f Makefile.in do-proto-toplev \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-tar-bz2 \
+ $(MAKE) -f Makefile.in do-tar \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+
+.PHONY: gdb-taz
+gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+ $(MAKE) -f Makefile.in gdb-tar \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+ $(MAKE) -f Makefile.in do-bz2 \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
#
./configure sun4
[ -z "$(CONFIGURE_TARGET_MODULES)" ] \
- || $(MAKE) $(CONFIGURE_TARGET_MODULES) ALL_GCC="" \
+ || $(MAKE) $(CONFIGURE_TARGET_MODULES) \
+ ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
# Make links, and run "make diststuff" or "make info" when needed.
rm -rf proto-toplev ; mkdir proto-toplev
fi ; \
else ln -s ../$$d proto-toplev/$$d ; fi ; \
done
- cd etc ; $(MAKE) info
+ cd etc && $(MAKE) info
$(MAKE) distclean
#
mkdir proto-toplev/etc
else true; fi
chmod -R og=u . || chmod og=u `find . -print`
#
+ # Create .gmo files from .po files.
+ for f in `find . -name '*.po' -type f -print`; do \
+ msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
+ done
+ #
-rm -f $(PACKAGE)-$(VER)
ln -s proto-toplev $(PACKAGE)-$(VER)
-.PHONY: do-tar-bz2
-do-tar-bz2:
- echo "==> Making $(PACKAGE)-$(VER).tar.bz2"
- -rm -f $(PACKAGE)-$(VER).tar.bz2
+.PHONY: do-tar
+do-tar:
+ echo "==> Making $(PACKAGE)-$(VER).tar"
+ -rm -f $(PACKAGE)-$(VER).tar
find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
| tar cTfh - $(PACKAGE)-$(VER).tar
+
+.PHONY: do-bz2
+do-bz2:
+ echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
+ -rm -f $(PACKAGE)-$(VER).tar.bz2
$(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
.PHONY: do-md5sum
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
-.PHONY: libg++.tar.bz2
-LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty
-libg++.tar.bz2: $(DIST_SUPPORT) libg++
- $(MAKE) -f Makefile.in taz TOOL=libg++ \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
-
GNATS_SUPPORT_DIRS=include libiberty send-pr
gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
$(MAKE) -f Makefile.in taz TOOL=gnats \
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
+.PHONY: gdb.tar
+gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
-.PHONY: dejagnu.tar.bz2
DEJAGNU_SUPPORT_DIRS= tcl expect libiberty
+.PHONY: dejagnu.tar.bz2
dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
$(MAKE) -f Makefile.in taz TOOL=dejagnu \
MD5PROG="$(MD5PROG)" \
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
+.PHONY: gdb+dejagnu.tar
+gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
.PHONY: insight.tar.bz2
INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
+.PHONY: insight.tar
+insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
.PHONY: insight+dejagnu.tar.bz2
INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
+.PHONY: insight+dejagnu.tar
+insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
.PHONY: newlib.tar.bz2
NEWLIB_SUPPORT_DIRS=libgloss