#
# Makefile for directory with subdirs to build.
-# Copyright (C) 1990, 1991, 1992 Free Software Foundation
+# Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#
srcdir = .
exec_prefix = $(prefix)
bindir = $(exec_prefix)/bin
libdir = $(exec_prefix)/lib
-tooldir = $(libdir)
+tooldir = $(exec_prefix)/$(target)
program_transform_name =
infodir = $(prefix)/info
includedir = $(prefix)/include
docdir = $(datadir)/doc
+GDB_NLM_DEPS =
SHELL = /bin/sh
-INSTALL = cp
+INSTALL = $${srcroot}/install.sh -c
INSTALL_PROGRAM = $(INSTALL)
-INSTALL_DATA = $(INSTALL)
+INSTALL_DATA = $(INSTALL) -m 644
+INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)'
+
+INSTALL_DOSREL = install-dosrel-fake
AS = as
AR = ar
AR_FLAGS = rc
CC = cc
-$(start-sanitize-chill)
+
+# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
+# here so that they can be overridden by Makefile fragments.
+HOST_CC = $(CC_FOR_BUILD)
+HOST_PREFIX =
+HOST_PREFIX_1 = loser-
+
+# We don't specify -g -O because many compilers don't support -g -O,
+# and/or -O is broken in and of itself.
CFLAGS = -g
+LIBCFLAGS = $(CFLAGS)
+CFLAGS_FOR_TARGET = $(CFLAGS)
+LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
+PICFLAG =
+PICFLAG_FOR_TARGET =
+
+# start-sanitize-chill
CHILLFLAGS = $(CFLAGS)
CHILL_LIB = -lchill
-$(end-sanitize-chill)
+# end-sanitize-chill
CXX = gcc
-CXXFLAGS = -g -O
+
+# Use -O2 to stress test the compiler.
+CXXFLAGS = -g -O2
+LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
+CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
+LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
+
RANLIB = ranlib
NM = nm
+# Not plain GZIP, since gzip looks there for extra command-line options.
+GZIPPROG = gzip
-BISON = `if [ -f $${rootme}/byacc/byacc ] ; \
- then echo $${rootme}/byacc/byacc ; \
+# BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
+BISON = `if [ -f $$r/byacc/byacc ] ; \
+ then echo $$r/byacc/byacc ; \
else echo byacc ; \
fi`
-LEX = `if [ -f $${rootme}/flex/flex ] ; \
- then echo $${rootme}/flex/flex ; \
+LEX = `if [ -f $$r/flex/flex ] ; \
+ then echo $$r/flex/flex ; \
else echo flex ; fi`
-MAKEINFO = `if [ -f $${rootme}/texinfo/C/makeinfo ] ; \
- then echo $${rootme}/texinfo/C/makeinfo ; \
+M4 = `if [ -f $$r/m4/m4 ] ; \
+ then echo $$r/m4/m4 ; \
+ else echo m4 ; fi`
+
+MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
+ then echo $$r/texinfo/makeinfo/makeinfo ; \
else echo makeinfo ; fi`
+# This just becomes part of the MAKEINFO definition passed down to
+# sub-makes. It lets flags be given on the command line while still
+# using the makeinfo from the object tree.
+MAKEINFOFLAGS =
+
+EXPECT = `if [ -f $$r/expect/expect ] ; \
+ then echo $$r/expect/expect ; \
+ else echo expect ; fi`
+
+RUNTEST = `if [ -f $${srcroot}/dejagnu/runtest ] ; \
+ then echo $${srcroot}/dejagnu/runtest ; \
+ else echo runtest ; fi`
+
+
+# libraries that may need to be augmented on a system-by-system basis
+X11_LIB = -lX11
+
# compilers to use to create programs which must be run in the build
# environment.
CC_FOR_BUILD = $(CC)
SUBDIRS = "this is set via configure, don't edit this"
OTHERS =
+# This is set by the configure script to the list of directories which
+# should be built using the target tools.
+TARGET_CONFIGDIRS = xiberty libgloss newlib libio librx libstdc++ libg++
+
+# This is set by the configure script to the arguments passed to configure.
+CONFIG_ARGUMENTS =
+
ALL = all.normal
-INSTALL_TARGET = install.all
+INSTALL_TARGET = install-dirs \
+ $(INSTALL_MODULES) \
+ $(INSTALL_TARGET_MODULES) \
+ $(INSTALL_X11_MODULES) \
+ install-gcc \
+ $(INSTALL_DOSREL)
-### for debugging
-#GCCVERBOSE=-v
CC_FOR_TARGET = ` \
- if [ -f $${rootme}/gcc/Makefile ] ; then \
- echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \
- else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
- echo $(CC); \
+ if [ -f $$r/gcc/Makefile ] ; then \
+ if [ -f $$r/newlib/Makefile ] ; then \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
else \
- t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
+ echo $$r/gcc/xgcc -B$$r/gcc/; \
fi; \
- fi`
-
-GCC_FOR_TARGET = ` \
- if [ -f $${rootme}/gcc/Makefile ] ; then \
- echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
- t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
+ t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
fi; \
fi`
-$(start-sanitize-chill)
+# start-sanitize-chill
CHILL_FOR_TARGET = ` \
- if [ -f $${rootme}/gcc/Makefile ] ; then \
- echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/ -L$${rootme}/chillrt/; \
+ if [ -f $$r/gcc/Makefile ] ; then \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
- t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
+ t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
fi; \
fi`
-$(end-sanitize-chill)
+
+# end-sanitize-chill
CXX_FOR_TARGET = ` \
- if [ -f $${rootme}/gcc/Makefile ] ; then \
- echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \
+ if [ -f $$r/gcc/Makefile ] ; then \
+ if [ -f $$r/newlib/Makefile ] ; then \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
+ else \
+ echo $$r/gcc/xgcc -B$$r/gcc/; \
+ fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CXX); \
else \
- t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
+ t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
fi; \
fi`
AS_FOR_TARGET = ` \
- if [ -f $${rootme}/gas/Makefile ] ; then \
- echo $${rootme}/gas/as.new ; \
+ if [ -f $$r/gas/as.new ] ; then \
+ echo $$r/gas/as.new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(AS); \
else \
- t='$(program_transform_name)'; echo as | sed -e '' $$t ; \
- fi \
+ t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+DLLTOOL_FOR_TARGET = ` \
+ if [ -f $$r/binutils/dlltool ] ; then \
+ echo $$r/binutils/dlltool ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(DLLTOOL); \
+ else \
+ t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
+ fi; \
fi`
AR_FOR_TARGET = ` \
- if [ -f $${rootme}/binutils/Makefile ] ; then \
- echo $${rootme}/binutils/ar ; \
+ if [ -f $$r/binutils/ar ] ; then \
+ echo $$r/binutils/ar ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(AR); \
else \
- t='$(program_transform_name)'; echo ar | sed -e '' $$t ; \
- fi \
+ t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
+ fi; \
fi`
RANLIB_FOR_TARGET = ` \
- if [ -f $${rootme}/binutils/Makefile ] ; then \
- echo $${rootme}/binutils/ranlib ; \
+ if [ -f $$r/binutils/ranlib ] ; then \
+ echo $$r/binutils/ranlib ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(RANLIB); \
else \
- t='$(program_transform_name)'; echo ranlib | sed -e '' $$t ; \
- fi \
+ t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
+ fi; \
fi`
NM_FOR_TARGET = ` \
- if [ -f $${rootme}/binutils/Makefile ] ; then \
- echo $${rootme}/binutils/nm ; \
+ if [ -f $$r/binutils/nm.new ] ; then \
+ echo $$r/binutils/nm.new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(NM); \
else \
- t='$(program_transform_name)'; echo nm | sed -e '' $$t ; \
- fi \
- fi`
-
-XTRAFLAGS = ` \
- if [ -f $${rootme}/gcc/Makefile ] ; then \
- if [ -f $${rootme}/newlib/Makefile ] ; then \
- echo -I$${rootme}/newlib/targ-include -I$${srcroot}/newlib/libc/include -I$${rootme}/gcc/include -nostdinc ; \
- else \
- echo -I$${rootme}/gcc/include ; \
- fi ; \
- else \
- echo ; \
+ t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
+ fi; \
fi`
-
#### host and target specific makefile fragments come in here.
###
-# Flags to pass down to sub-makes -- please keep these in alphabetical order
-FLAGS_TO_PASS = \
- "AR=$(AR)" \
+# Flags to pass down to all sub-makes.
+# Please keep these in alphabetical order.
+BASE_FLAGS_TO_PASS = \
"AR_FLAGS=$(AR_FLAGS)" \
"AR_FOR_TARGET=$(AR_FOR_TARGET)" \
+ "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
"BISON=$(BISON)" \
- "CXXFLAGS=$(CXXFLAGS)" \
- "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
- "CC=$(CC)" \
"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
+ "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
-$(start-sanitize-chill)\
+ "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
+ $(start-sanitize-chill)\
"CHILLFLAGS=$(CHILLFLAGS)" \
"CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
"CHILL_LIB=$(CHILL_LIB)" \
-$(end-sanitize-chill)\
- "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
+ $(end-sanitize-chill)\
+ "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
+ "CXXFLAGS=$(CXXFLAGS)" \
+ "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
+ "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
+ "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
+ "GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
+ "INSTALL_XFORM=$(INSTALL_XFORM)" \
"LDFLAGS=$(LDFLAGS)" \
"LEX=$(LEX)" \
- "LOADLIBES=$(LOADLIBES)" \
- "MAKEINFO=$(MAKEINFO)" \
- "RANLIB=$(RANLIB)" \
+ "LIBCFLAGS=$(LIBCFLAGS)" \
+ "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
+ "LIBCXXFLAGS=$(LIBCXXFLAGS)" \
+ "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
+ "M4=$(M4)" \
+ "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
+ "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
+ "PICFLAG=$(PICFLAG)" \
+ "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
+ "SHELL=$(SHELL)" \
+ "EXPECT=$(EXPECT)" \
+ "RUNTEST=$(RUNTEST)" \
+ "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
+ "YACC=$(BISON)" \
"exec_prefix=$(exec_prefix)" \
"prefix=$(prefix)" \
"tooldir=$(tooldir)"
+# Flags to pass down to most sub-makes, in which we're building with
+# the host environment.
+# If any variables are added here, they must be added to do-*, below.
+EXTRA_HOST_FLAGS = \
+ 'AR=$(AR)' \
+ 'AS=$(AS)' \
+ 'CC=$(CC)' \
+ 'CXX=$(CXX)' \
+ 'NM=$(NM)' \
+ 'RANLIB=$(RANLIB)'
+
+FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
+
# Flags that are concerned with the location of the X11 include files
# and library files
X11_FLAGS_TO_PASS = \
"X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \
- "X11_LIB_FLAGS=$(X11_LIB_FLAGS)"
-
-# Flags to pass down to makes which are built with the target
-# environment (e.g. libg++, xiberty, newlib). -- keep these in alpha order please
-TARGET_FLAGS_TO_PASS = \
- "AR=$(AR_FOR_TARGET)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "AS=$(AS_FOR_TARGET)" \
- "BISON=$(BISON)" \
- "CXX=$(CXX_FOR_TARGET)" \
- "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
- "CXXFLAGS=$(CXXFLAGS)" \
- "CC=$(CC_FOR_TARGET)" \
- "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
- "CFLAGS=$(CFLAGS)" \
- "INSTALL=$(INSTALL)" \
- "INSTALL_DATA=$(INSTALL_DATA)" \
- "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
- "LDFLAGS=$(LDFLAGS)" \
- "LEX=$(LEX)" \
- "LOADLIBES=$(LOADLIBES)" \
- "MAKEINFO=$(MAKEINFO)" \
- "NM=$(NM_FOR_TARGET)" \
- "RANLIB=$(RANLIB_FOR_TARGET)" \
- "XTRAFLAGS=$(XTRAFLAGS)" \
- "exec_prefix=$(exec_prefix)" \
- "prefix=$(prefix)" \
- "tooldir=$(tooldir)"
+ "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \
+ "X11_LIB=$(X11_LIB)"
+
+# Flags to pass down to makes which are built with the target environment.
+# The double $ decreases the length of the command line; the variables
+# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
+# If any variables are added here, they must be added to do-*, below.
+EXTRA_TARGET_FLAGS = \
+ 'AR=$$(AR_FOR_TARGET)' \
+ 'AS=$$(AS_FOR_TARGET)' \
+ 'CC=$$(CC_FOR_TARGET)' \
+ 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
+ 'CXX=$$(CXX_FOR_TARGET)' \
+ 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
+ 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
+ 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
+ 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
+ 'NM=$$(NM_FOR_TARGET)' \
+ 'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
+ 'RANLIB=$$(RANLIB_FOR_TARGET)'
+
+TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
# Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
# unfortunately needs the native compiler and the target ar and
-# ranlib. Keep these in alphabetical order, please.
-GCC_FLAGS_TO_PASS = \
- "AR=$(AR_FOR_TARGET)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
- "AS=$(AS)" \
- "BISON=$(BISON)" \
- "CXX=$(CXX)" \
- "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
- "CXXFLAGS=$(CXXFLAGS)" \
- "CC=$(CC)" \
- "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
- "CFLAGS=$(CFLAGS)" \
- "INSTALL=$(INSTALL)" \
- "INSTALL_DATA=$(INSTALL_DATA)" \
- "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
- "LDFLAGS=$(LDFLAGS)" \
- "LEX=$(LEX)" \
- "LOADLIBES=$(LOADLIBES)" \
- "MAKEINFO=$(MAKEINFO)" \
- "NM=$(NM)" \
- "RANLIB=$(RANLIB_FOR_TARGET)" \
- "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
- "XTRAFLAGS=$(XTRAFLAGS)" \
- "exec_prefix=$(exec_prefix)" \
- "prefix=$(prefix)" \
- "tooldir=$(tooldir)"
-
-# The first rule in the file had better be this one. Don't put any above it.
-all: $(ALL)
-
-.PHONY: all check dvi info install-info
-.NOEXPORT:
-
-info check dvi:
- @rootme=`pwd` ; export rootme ; \
- $(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
-
-install-info: install-info-dirs force
- -parent=`echo $(infodir)|sed -e 's@/[^/]*$$@@'`; \
- if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
- -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; fi
- @rootme='pwd' ; export rootme ; $(MAKE) $(FLAGS_TO_PASS) DO=install-info "DODIRS=$(SUBDIRS)" subdir_do
- @rootme='pwd' ; export rootme ; $(MAKE) $(FLAGS_TO_PASS) dir.info install-dir.info
-
-install-dir.info:
- -parent=`echo $(infodir)|sed -e 's@/[^/]*$$@@'`; \
- if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
- -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; fi
- $(INSTALL_DATA) dir.info $(infodir)/dir.info
-
-all.normal: all-m4 all-autoconf all-libiberty all-mmalloc all-texinfo \
- all-byacc all-flex all-opcodes all-bfd all-ld all-gas all-tgas \
- all-gcc all-binutils all-libg++ all-readline all-z8ksim all-h8300sim all-gdb \
- all-make all-rcs all-cvs all-diff all-grep \
- all-patch all-emacs all-ispell all-etc \
- all-tcl all-tk all-expect \
- all-newlib \
- $(start-sanitize-chill) \
- all-chillrt \
- $(end-sanitize-chill) \
- all-gprof all-send_pr all-libm all-deja-gnu \
- all-fileutils all-find all-gawk all-sed all-shellutils \
- all-textutils all-time all-wdiff
-
-
-all.cross: all-libiberty all-mmalloc all-gas all-byacc all-flex all-ld \
- all-opcodes all-z8ksim all-h8300sim all-bfd all-readline \
- all-gdb all-binutils all-gcc all-newlib \
- $(start-sanitize-chill) \
- all-chillrt \
- $(end-sanitize-chill) \
- all-deja-gnu
-
-.PHONY: clean distclean mostlyclean realclean do_clean
-
-do_clean:
- -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E
-
-clean mostlyclean: do_clean
- @rootme=`pwd` ; export rootme ; \
- $(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
-
-distclean realclean: do_clean
- @rootme=`pwd` ; export rootme ; \
- $(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
- -rm -f Makefile config.status
-
-uninstall:
- @echo "the uninstall target is not supported in this tree"
-
-install: $(INSTALL_TARGET)
- -parent=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
- if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
- -if [ -d $(man1dir) ] ; then true ; else mkdir $(man1dir) ; fi
-
-install.all: install-no-fixedincludes
- @if [ -f ./gcc/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gcc; \
- $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
- else \
- true ; \
- fi
-
-install-no-fixedincludes: install-dirs gcc-no-fixedincludes \
+# ranlib.
+# If any variables are added here, they must be added to do-*, below.
+# The HOST_* variables are a special case, which are used for the gcc
+# cross-building scheme.
+EXTRA_GCC_FLAGS = \
+ 'AR=$$(AR_FOR_TARGET)' \
+ 'AS=$(AS)' \
+ 'CC=$(CC)' \
+ 'CXX=$(CXX)' \
+ 'HOST_CC=$(CC_FOR_BUILD)' \
+ 'HOST_PREFIX=$(HOST_PREFIX)' \
+ 'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
+ 'NM=$(NM)' \
+ 'RANLIB=$$(RANLIB_FOR_TARGET)'
+
+GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
+
+# This is a list of the targets for all of the modules which are compiled
+# using $(FLAGS_TO_PASS).
+ALL_MODULES = \
+ all-autoconf \
+ all-bfd \
+ all-binutils \
+ all-byacc \
+ all-cvs \
+ all-dejagnu \
+ all-diff \
+ all-dosutils \
+ all-etc \
+ all-fileutils \
+ all-find \
+ all-flex \
+ all-gas \
+ all-gawk \
+ all-gprof \
+ all-grep \
+ all-gzip \
+ all-hello \
+ all-indent \
+ all-ispell \
+ all-ld \
+ all-libiberty \
+ all-m4 \
+ all-make \
+ all-mmalloc \
+ all-opcodes \
+ all-patch \
+ all-prms \
+ all-rcs \
+ all-readline \
+ all-release \
+ all-recode \
+ all-sed \
+ all-send-pr \
+ all-shellutils \
+ all-sim \
+ all-tar \
+ all-tcl \
+ all-texinfo \
+ all-textutils \
+ all-tgas \
+ all-time \
+ all-uudecode \
+ all-wdiff
+
+# This is a list of the check targets for all of the modules which are
+# compiled using $(FLAGS_TO_PASS).
+# This is a list of the check targets for all of the modules which are
+# compiled using $(FLAGS_TO_PASS).
+#
+# The list is in two parts. The first lists those tools which
+# are tested as part of the host's native tool-chain, and not
+# tested in a cross configuration.
+NATIVE_CHECK_MODULES = \
+ check-byacc \
+ check-flex
+
+CROSS_CHECK_MODULES = \
+ check-autoconf \
+ check-bfd \
+ check-binutils \
+ check-cvs \
+ check-dejagnu \
+ check-diff \
+ check-etc \
+ check-fileutils \
+ check-find \
+ check-gas \
+ check-gawk \
+ check-gprof \
+ check-grep \
+ check-gzip \
+ check-hello \
+ check-indent \
+ check-ispell \
+ check-ld \
+ check-libiberty \
+ check-m4 \
+ check-make \
+ check-mmcheckoc \
+ check-opcodes \
+ check-patch \
+ check-prms \
+ check-rcs \
+ check-readline \
+ check-recode \
+ check-sed \
+ check-send-pr \
+ check-shellutils \
+ check-sim \
+ check-tar \
+ check-tcl \
+ check-texinfo \
+ check-textutils \
+ check-tgas \
+ check-time \
+ check-uudecode \
+ check-wdiff
+
+CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
+
+# This is a list of the install targets for all of the modules which are
+# compiled using $(FLAGS_TO_PASS).
+INSTALL_MODULES = \
install-autoconf \
install-bfd \
install-binutils \
- install-opcodes \
install-byacc \
install-cvs \
+ install-dejagnu \
install-diff \
- install-deja-gnu \
- install-emacs \
+ install-dosutils \
install-etc \
- install-expect \
+ install-fileutils \
+ install-find \
install-flex \
install-gas \
- install-gdb \
- install-glob \
+ install-gawk \
install-gprof \
install-grep \
+ install-gzip \
+ install-hello \
+ install-indent \
install-ispell \
install-ld \
- install-libg++ \
install-libiberty \
- install-libm \
+ install-m4 \
install-make \
install-mmalloc \
- install-newlib \
- $(start-sanitize-chill) \
- install-chillrt \
- $(end-sanitize-chill) \
+ install-opcodes \
install-patch \
+ install-prms \
install-rcs \
install-readline \
- install-send_pr \
+ install-recode \
+ install-sed \
+ install-send-pr \
+ install-shellutils \
+ install-sim \
+ install-tar \
install-tcl \
install-texinfo \
- install-tk \
- install-z8ksim \
- install-h8300sim \
- install-fileutils install-find install-gawk install-m4 install-sed install-shellutils \
- install-textutils install-time install-wdiff
+ install-textutils \
+ install-tgas \
+ install-time \
+ install-uudecode \
+ install-wdiff
+
+# This is a list of the targets for all of the modules which are compiled
+# using $(X11_FLAGS_TO_PASS).
+ALL_X11_MODULES = \
+ all-emacs \
+ all-emacs19 \
+ all-gdb \
+ all-expect \
+ all-gash \
+ all-tclX \
+ all-tk
+
+# This is a list of the check targets for all of the modules which are
+# compiled using $(X11_FLAGS_TO_PASS).
+CHECK_X11_MODULES = \
+ check-emacs \
+ check-gdb \
+ check-expect \
+ check-gash \
+ check-tclX \
+ check-tk
+
+# This is a list of the install targets for all the modules which are
+# compiled using $(X11_FLAGS_TO_PASS).
+INSTALL_X11_MODULES = \
+ install-emacs \
+ install-emacs19 \
+ install-gdb \
+ install-expect \
+ install-gash \
+ install-tclX \
+ install-tk
+
+# This is a list of the targets for all of the modules which are compiled
+# using $(TARGET_FLAGS_TO_PASS).
+ALL_TARGET_MODULES = \
+ all-libio \
+ all-libstdc++ \
+ all-librx \
+ all-libg++ \
+ all-newlib \
+ all-libgloss \
+ all-xiberty
+
+# This is a list of the configure targets for all of the modules which
+# are compiled using the target tools.
+CONFIGURE_TARGET_MODULES = \
+ configure-libio \
+ configure-libstdc++ \
+ configure-librx \
+ configure-libg++ \
+ configure-newlib \
+ configure-libgloss \
+ configure-xiberty
+
+# This is a list of the check targets for all of the modules which are
+# compiled using $(TARGET_FLAGS_TO_PASS).
+CHECK_TARGET_MODULES = \
+ check-libio \
+ check-libstdc++ \
+ check-libg++ \
+ check-newlib \
+ check-xiberty
+
+# This is a list of the install targets for all of the modules which are
+# compiled using $(TARGET_FLAGS_TO_PASS).
+INSTALL_TARGET_MODULES = \
+ install-libio \
+ install-libstdc++ \
+ install-libg++ \
+ install-newlib \
+ install-libgloss \
+ install-xiberty
-#
-# Install the gcc headers files, but not the fixed include files,
-# which we are not allowed to distribute. This rule is very dependent
-# on the workings of the gcc Makefile.in.
-#
-gcc-no-fixedincludes:
- @if [ -f ./gcc/Makefile ]; then \
- rm -rf gcc/tmp-include; \
- mv gcc/include gcc/tmp-include 2>/dev/null; \
- mkdir gcc/include; \
- touch gcc/stmp-fixincludes; \
- rm -f gcc/stmp-headers; \
- rootme=`pwd`; export rootme; \
- srcroot=`cd $(srcdir); pwd` ; export srcroot; \
- (cd ./gcc; \
- $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
- rm -rf gcc/include; \
- mv gcc/tmp-include gcc/include 2>/dev/null; \
- else true; fi
+# This is a shell case of all modules which are compiled using
+# $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
+TARGET_LIBS = libio | libstdc++ | librx | libg++ | newlib | xiberty
-install.cross: install-dirs install-libiberty install-mmalloc \
- install-binutils install-opcodes install-byacc install-flex \
- install-ld install-gas install-readline \
- install-glob install-gdb install-mmalloc \
- install-newlib \
- $(start-sanitize-chill) \
- install-chillrt \
- $(end-sanitize-chill) \
- install-gcc install-etc install-deja-gnu
-
-### deja-gnu
-all-deja-gnu: force
- @if [ -f ./deja-gnu/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./deja-gnu; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
+# The first rule in the file had better be this one. Don't put any above it.
+all: all.normal
+.PHONY: all
+
+# The target built for a native build.
+.PHONY: all.normal
+all.normal: \
+ $(ALL_MODULES) \
+ $(ALL_TARGET_MODULES) \
+ $(ALL_X11_MODULES) \
+ all-gcc
+
+# Do a target for all the subdirectories. A ``make do-X'' will do a
+# ``make X'' in all subdirectories (because, in general, there is a
+# dependency (below) of X upon do-X, a ``make X'' will also do this,
+# but it may do additional work as well).
+# This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
+# because it is so large that it can easily overflow the command line
+# length limit on some systems.
+DO_X = \
+ do-clean \
+ do-distclean \
+ do-dvi \
+ do-info \
+ do-install-info \
+ do-installcheck \
+ do-mostlyclean \
+ do-maintainer-clean \
+ do-TAGS
+.PHONY: $(DO_X)
+$(DO_X):
+ @target=`echo $@ | sed -e 's/^do-//'`; \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ for i in $(SUBDIRS) $(TARGET_CONFIGDIRS); do \
+ if [ -f ./$$i/Makefile ]; then \
+ case $$i in \
+ $(TARGET_LIBS) ) \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
+ done; \
+ ;; \
+ gcc) \
+ for flag in $(EXTRA_GCC_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
+ done; \
+ ;; \
+ *) \
+ for flag in $(EXTRA_HOST_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
+ done; \
+ ;; \
+ esac ; \
+ export AR AS CC CXX NM RANLIB; \
+ if (cd ./$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ $${target}); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
-install-deja-gnu: force
- @if [ -f ./deja-gnu/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./deja-gnu; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
+# Here are the targets which correspond to the do-X targets.
-### autoconf
-all-autoconf: force
- @if [ -f ./autoconf/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./autoconf; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
+.PHONY: info installcheck dvi install-info
+.PHONY: clean distclean mostlyclean maintainer-clean realclean
+.PHONY: local-clean local-distclean local-maintainer-clean
+info: do-info
+installcheck: do-installcheck
+dvi: do-dvi
-install-autoconf: force
- @if [ -f ./autoconf/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./autoconf; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
+install-info: do-install-info dir.info
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ if [ -f dir.info ] ; then \
+ $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
+ else true ; fi
-### etc
-all-etc: force
- @if [ -f ./etc/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./etc; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
+local-clean:
+ -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E
-install-etc: force
- @if [ -f ./etc/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./etc; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
+local-distclean:
+ -rm -f Makefile config.status
-### libiberty
-all-libiberty: force
- @if [ -f ./libiberty/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./libiberty; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
+local-maintainer-clean:
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
-install-libiberty: force
- @if [ -f ./libiberty/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./libiberty; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
+clean: do-clean local-clean
+mostlyclean: do-mostlyclean local-clean
+distclean: do-distclean local-clean local-distclean
+maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
+maintainer-clean: local-distclean
+realclean: maintainer-clean
-### xiberty
-all-xiberty: all-gcc all-newlib
- @if [ -f ./xiberty/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd`; export srcroot ; \
- (cd ./xiberty; \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
+# Check target.
-install-xiberty: force
- @if [ -f ./xiberty/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd`; export srcroot ; \
- (cd ./xiberty; \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
+.PHONY: check
+check: $(CHECK_MODULES) \
+ $(CHECK_TARGET_MODULES) \
+ $(CHECK_X11_MODULES) \
+ check-gcc
-### mmalloc
-all-mmalloc: force
- @if [ -f ./mmalloc/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./mmalloc; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
+# Installation targets.
-install-mmalloc: force
- @if [ -f ./mmalloc/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./mmalloc; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
+.PHONY: install uninstall source-vault binary-vault vault-install
+install: $(INSTALL_TARGET)
-### texinfo
-all-texinfo: all-libiberty
- @if [ -f ./texinfo/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./texinfo; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
+uninstall:
+ @echo "the uninstall target is not supported in this tree"
-install-texinfo: force
- @if [ -f ./texinfo/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./texinfo; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
+source-vault:
+ $(MAKE) -f ./release/Build-A-Release \
+ host=$(host_alias) source-vault
+
+binary-vault:
+ $(MAKE) -f ./release/Build-A-Release \
+ host=$(host_alias) target=$(target_alias)
-### bfd
-all-bfd: force
- @if [ -f ./bfd/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./bfd; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
+vault-install:
+ @if [ -f ./release/vault-install ] ; then \
+ ./release/vault-install $(host_alias) $(target_alias) ; \
else \
- true ; \
+ true ; \
fi
-install-bfd: force
- @if [ -f ./bfd/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./bfd; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
+.PHONY: install.all
+install.all: install-no-fixedincludes
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`pwd` ; export r ; \
+ (cd ./gcc; \
+ $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
else \
true ; \
fi
+# install-no-fixedincludes is used because Cygnus can not distribute
+# the fixed header files.
+.PHONY: install-no-fixedincludes
+install-no-fixedincludes: \
+ install-dirs \
+ $(INSTALL_MODULES) \
+ $(INSTALL_TARGET_MODULES) \
+ $(INSTALL_X11_MODULES) \
+ gcc-no-fixedincludes
-### opcodes
-all-opcodes: force
- @if [ -f ./opcodes/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./opcodes; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
+# Install the gcc headers files, but not the fixed include files,
+# which Cygnus is not allowed to distribute. This rule is very
+# dependent on the workings of the gcc Makefile.in.
+.PHONY: gcc-no-fixedincludes
+gcc-no-fixedincludes:
+ @if [ -f ./gcc/Makefile ]; then \
+ rm -rf gcc/tmp-include; \
+ mv gcc/include gcc/tmp-include 2>/dev/null; \
+ mkdir gcc/include; \
+ cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
+ touch gcc/stmp-fixinc gcc/include/fixed; \
+ rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd` ; export srcroot; \
+ (cd ./gcc; \
+ $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ rm -rf gcc/include; \
+ mv gcc/tmp-include gcc/include 2>/dev/null; \
+ else true; fi
-install-opcodes: force
- @if [ -f ./opcodes/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./opcodes; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
+# This rule is used to build the modules which use FLAGS_TO_PASS. To
+# build a target all-X means to cd to X and make all.
+#
+# all-gui, and all-libproc are handled specially because
+# they are still experimental, and if they fail to build, that
+# shouldn't stop "make all".
+.PHONY: $(ALL_MODULES) all-gui all-libproc
+$(ALL_MODULES) all-gui all-libproc:
+ @dir=`echo $@ | sed -e 's/all-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# These rules are used to check the modules which use FLAGS_TO_PASS.
+# To build a target check-X means to cd to X and make check. Some
+# modules are only tested in a native toolchain.
+
+.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
+$(NATIVE_CHECK_MODULES):
+ @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi; \
+ fi
+
+$(CROSS_CHECK_MODULES):
+ @dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi
+
+# This rule is used to install the modules which use FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(INSTALL_MODULES)
+$(INSTALL_MODULES): install-dirs
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+# This rule is used to configure the modules which are built with the
+# target tools.
+.PHONY: $(CONFIGURE_TARGET_MODULES)
+$(CONFIGURE_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/configure-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
+ if [ -d ./$${dir} ]; then true; else mkdir $${dir}; fi; \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ cd $${dir}; \
+ $${srcroot}/configure $(CONFIG_ARGUMENTS) --srcdir=$${srcroot}/$${dir}; \
+ else \
+ true; \
+ fi
+
+# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
+# To build a target all-X means to cd to X and make all.
+.PHONY: $(ALL_TARGET_MODULES)
+$(ALL_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/all-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(CHECK_TARGET_MODULES)
+$(CHECK_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi
+
+# This rule is used to install the modules which use
+# TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
+# and make install.
+.PHONY: $(INSTALL_TARGET_MODULES)
+$(INSTALL_TARGET_MODULES): install-dirs
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+# This rule is used to build the modules which use X11_FLAGS_TO_PASS.
+# To build a target all-X means to cd to X and make all.
+.PHONY: $(ALL_X11_MODULES)
+$(ALL_X11_MODULES):
+ @dir=`echo $@ | sed -e 's/all-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; \
+ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# This rule is used to check the modules which use X11_FLAGS_TO_PASS.
+# To build a target check-X means to cd to X and make all.
+.PHONY: $(CHECK_X11_MODULES)
+$(CHECK_X11_MODULES):
+ @dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; \
+ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi
+
+# This rule is used to install the modules which use X11_FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(INSTALL_X11_MODULES)
+$(INSTALL_X11_MODULES):
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; \
+ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+# gcc is the only module which uses GCC_FLAGS_TO_PASS.
+.PHONY: all-gcc
+all-gcc:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
else \
- true ; \
+ true; \
fi
-### binutils
-all-binutils: all-opcodes all-libiberty all-bfd all-flex
- @if [ -f ./binutils/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./binutils; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
+.PHONY: check-gcc
+check-gcc:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
else \
- true ; \
+ true; \
fi
-install-binutils: force
- @if [ -f ./binutils/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./binutils; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
+.PHONY: install-gcc
+install-gcc:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+# EXPERIMENTAL STUFF
+# This rule is used to install the modules which use FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: install-dosrel
+install-dosrel: install-dirs info
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+install-dosrel-fake:
+
+
+# This is a list of inter-dependencies among modules.
+all-autoconf: all-m4
+all-bfd:
+all-binutils: all-libiberty all-opcodes all-bfd all-flex all-byacc
+all-byacc:
+all-cvs:
+all-dejagnu: all-tcl all-expect all-tk
+all-diff: all-libiberty
+all-emacs:
+all-emacs19: all-byacc
+all-etc:
+all-expect: all-tcl all-tk
+all-fileutils: all-libiberty
+all-find:
+all-flex: all-libiberty all-byacc
+all-gas: all-libiberty all-opcodes all-bfd
+all-gash: all-tcl
+all-gawk:
+all-gcc: all-libiberty all-byacc all-binutils all-gas all-ld
+all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim $(gdbnlmrequirements)
+all-gprof: all-libiberty all-bfd
+all-grep: all-libiberty
+all-gui: all-gdb all-libproc all-librx
+all-gzip: all-libiberty
+all-hello: all-libiberty
+all-indent:
+all-ispell: all-emacs19
+all-ld: all-libiberty all-bfd all-byacc all-flex
+configure-libg++: all-gcc
+all-libg++: configure-libg++ all-gas all-ld all-gcc all-xiberty all-newlib all-libio all-librx all-libstdc++
+configure-libgloss: all-gcc
+all-libgloss: configure-libgloss
+configure-libio: all-gcc
+all-libio: configure-libio all-gas all-ld all-gcc all-xiberty all-newlib
+all-libiberty:
+configure-librx: all-gcc all-newlib
+all-librx: configure-librx
+configure-libstdc++: all-gcc
+all-libstdc++: configure-libstdc++ all-gas all-ld all-gcc all-xiberty all-newlib all-libio
+all-m4: all-libiberty
+all-make: all-libiberty
+all-mmalloc:
+configure-newlib: all-gcc
+all-newlib: configure-newlib all-binutils all-gas all-gcc
+all-opcodes: all-bfd
+all-patch:
+all-prms: all-libiberty
+all-rcs:
+all-readline:
+all-recode: all-libiberty
+all-sed: all-libiberty
+all-send-pr: all-prms
+all-shellutils:
+all-sim: all-libiberty all-bfd
+all-tar: all-libiberty
+all-tcl:
+all-tclX: all-tcl all-tk
+all-tk: all-tcl
+all-texinfo: all-libiberty
+all-textutils:
+all-tgas: all-libiberty all-bfd
+all-time:
+all-wdiff:
+all-uudecode: all-libiberty
+configure-xiberty: all-gcc
+all-xiberty: configure-xiberty all-gcc all-ld all-newlib
-### newlib
-all-newlib: all-binutils all-ld all-gas all-gcc
- @if [ -f ./newlib/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd` ; export srcroot ; \
- (cd ./newlib; \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
+### other supporting targets
-install-newlib: force
- @if [ -f ./newlib/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd` ; export srcroot ; \
- (cd ./newlib; \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
+MAKEDIRS= \
+ $(prefix) \
+ $(exec_prefix) \
+ $(tooldir)
-### start-sanitize-chill
-### chillrt
-all-chillrt: all-binutils all-ld all-gas all-gcc all-newlib
- @if [ -f ./chillrt/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd` ; export srcroot ; \
- (cd ./chillrt; \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
+.PHONY: install-dirs
+install-dirs:
+ @for i in $(MAKEDIRS) ; do \
+ echo Making $$i... ; \
+ parent=`echo $$i | sed -e 's@/[^/]*$$@@' | sed -e 's@^$$@/@'`; \
+ if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi ; \
+ if [ ! -d $$i ] ; then \
+ if mkdir $$i ; then \
+ true ; \
+ else \
+ exit 1 ; \
+ fi ; \
+ else \
+ true ; \
+ fi ; \
+ done
-install-chillrt: force
- @if [ -f ./chillrt/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd` ; export srcroot ; \
- (cd ./chillrt; \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) install) ; \
- else \
- true ; \
+
+dir.info: do-install-info
+ if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
+ $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
+ mv -f dir.info.new dir.info ; \
+ else true ; \
fi
-### end-sanitize-chill
-
-### gprof
-all-gprof: all-libiberty all-bfd
- @if [ -f ./gprof/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gprof; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-gprof: force
- @if [ -f ./gprof/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gprof; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### byacc
-all-byacc: force
- @if [ -f ./byacc/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./byacc; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-byacc: force
- @if [ -f ./byacc/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./byacc; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### flex
-all-flex: all-libiberty
- @if [ -f ./flex/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./flex; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-flex: force
- @if [ -f ./flex/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./flex; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-### gcc
-all-gcc: all-libiberty all-byacc all-binutils
- @if [ -f ./gcc/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd` ; export srcroot ; \
- (cd ./gcc; \
- $(MAKE) $(GCC_FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-gcc: force
- @if [ -f ./gcc/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd` ; export srcroot ; \
- (cd ./gcc; \
- $(MAKE) $(GCC_FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### readline
-all-readline: force
- @if [ -f ./readline/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./readline; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-readline: force
- @if [ -f ./readline/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./readline; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### glob
-all-glob: force
- @if [ -f ./glob/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./glob; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-glob: force
- @if [ -f ./glob/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./glob; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### gas
-all-gas: all-libiberty all-opcodes all-bfd
- @if [ -f ./gas/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gas; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-gas: force
- @if [ -f ./gas/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gas; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### gas
-all-tgas: all-libiberty all-bfd
- @if [ -f ./tgas/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./tgas; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-
-### ld
-all-ld: all-libiberty all-bfd all-byacc all-flex
- @if [ -f ./ld/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./ld; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-ld: force
- @if [ -f ./ld/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./ld; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### gdb
-all-gdb: all-bfd all-opcodes all-libiberty all-mmalloc all-readline all-glob all-byacc
- @if [ -f ./gdb/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gdb; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-gdb: force
- @if [ -f ./gdb/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gdb; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### make
-all-make: all-libiberty
- @if [ -f ./make/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./make; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-make: force
- @if [ -f ./make/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./make; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### diff
-all-diff: force
- @if [ -f ./diff/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./diff; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-diff: force
- @if [ -f ./diff/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./diff/; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### grep
-all-grep: force
- @if [ -f ./grep/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./grep; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-grep: force
- @if [ -f ./grep/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./grep; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### rcs
-all-rcs: force
- @if [ -f ./rcs/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./rcs; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-rcs: force
- @if [ -f ./rcs/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./rcs; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### cvs
-all-cvs: force
- @if [ -f ./cvs/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./cvs; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-cvs: force
- @if [ -f ./cvs/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./cvs; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### patch
-all-patch: force
- @if [ -f ./patch/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./patch; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-patch: force
- @if [ -f ./patch/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./patch; \
- $(MAKE) $(FLAGS_TO_PASS) \
- bindir=$(bindir) \
- man1dir=$(man1dir) install) ; \
- else \
- true ; \
- fi
-
-### emacs
-all-emacs: force
- @if [ -f ./emacs/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./emacs; \
- $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-emacs: force
- @if [ -f ./emacs/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./emacs; \
- $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### ispell
-all-ispell: all-emacs
- @if [ -f ./ispell/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./ispell; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-ispell: force
- @if [ -f ./ispell/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./ispell; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### send_pr
-all-send_pr: force
- @if [ -f ./send_pr/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./send_pr; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-send_pr: force
- @if [ -f ./send_pr/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./send_pr; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### libm
-all-libm: force
- @if [ -f ./libm/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./libm; \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-libm: force
- @if [ -f ./libm/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./libm; \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### libg++
-
-all-libg++: all-gas all-ld all-gcc all-xiberty all-newlib
- @if [ -f ./libg++/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd` ; export srcroot ; \
- (cd ./libg++; \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-libg++: force
- @if [ -f ./libg++/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd` ; export srcroot ; \
- (cd ./libg++; \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-### tcl
-all-tcl:
- @if [ -f ./tcl/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd`; export srcroot ; \
- (cd ./tcl; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-tcl: force
- @if [ -f ./tcl/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd`; export srcroot ; \
- (cd ./tcl; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-
-### tk
-all-tk: all-tcl
- @if [ -f ./tk/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd`; export srcroot ; \
- (cd ./tk; \
- $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-tk: force
- @if [ -f ./tk/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd`; export srcroot ; \
- (cd ./tk; \
- $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### expect
-all-expect: all-tcl
- @if [ -f ./expect/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd`; export srcroot ; \
- (cd ./expect; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-expect: force
- @if [ -f ./expect/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd`; export srcroot ; \
- (cd ./expect; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### z8ksim
-all-z8ksim: all-bfd
- @if [ -f ./z8ksim/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./z8ksim; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-z8ksim: force
- @if [ -f ./z8ksim/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./z8ksim; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### h8300sim:
-all-h8300sim: all-bfd
- @if [ -f ./h8300sim/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./h8300sim; \
- $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-h8300sim: force
- @if [ -f ./h8300sim/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./h8300sim; \
- $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-
-### fileutils
-all-fileutils: force
- @if [ -f ./fileutils/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./fileutils; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-fileutils: force
- @if [ -f ./fileutils/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./fileutils; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### find
-all-find: force
- @if [ -f ./find/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./find; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-find: force
- @if [ -f ./find/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./find; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### gawk
-all-gawk: force
- @if [ -f ./gawk/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gawk; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-gawk: force
- @if [ -f ./gawk/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./gawk; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### m4
-all-m4: all-libiberty
- @if [ -f ./m4/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./m4; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-m4: force
- @if [ -f ./m4/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./m4; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### sed
-all-sed: force
- @if [ -f ./sed/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./sed; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-sed: force
- @if [ -f ./sed/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./sed; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### time
-all-time: force
- @if [ -f ./time/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./time; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-time: force
- @if [ -f ./time/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./time; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### wdiff
-all-wdiff: force
- @if [ -f ./wdiff/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./wdiff; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-wdiff: force
- @if [ -f ./wdiff/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./wdiff; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### shellutils
-all-shellutils: force
- @if [ -f ./shellutils/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./shellutils; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-shellutils: force
- @if [ -f ./shellutils/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./shellutils; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-### textutils
-all-textutils: force
- @if [ -f ./textutils/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./textutils; $(MAKE) $(FLAGS_TO_PASS) all) ; \
- else \
- true ; \
- fi
-
-install-textutils: force
- @if [ -f ./textutils/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
- (cd ./textutils; $(MAKE) $(FLAGS_TO_PASS) install) ; \
- else \
- true ; \
- fi
-
-
-
-### other supporting targets
-
-subdir_do:
-### start-sanitize-chill
-###
-### WARNING: THIS IS VERY UGLY AND I DID NOT DO THIS WILLINGLY
-###
-### if you change the code for libg++ et al, also change the
-### code for chillrt
-###
-### end-sanitize-chill
- @for i in $(DODIRS); do \
- if [ -f ./$$i/localenv ] || [ -f ./$$i/Makefile ] ; then \
- case $$i in \
- libg++ | xiberty | newlib) \
- if (rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd` ; export srcroot ; \
- cd ./$$i ; \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) $(DO)) ; then true ; \
- else exit 1 ; fi \
- ;; \
- $(start-sanitize-chill) \
- chillrt) \
- if (rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd` ; export srcroot ; \
- cd ./$$i ; \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) $(DO)) ; then true ; \
- else exit 1 ; fi \
- ;; \
- $(end-sanitize-chill) \
- gcc) \
- if (rootme=`pwd` ; export rootme ; \
- srcroot=`cd $(srcdir); pwd` ; export srcroot ; \
- cd ./$$i ; \
- $(MAKE) $(GCC_FLAGS_TO_PASS) $(DO)) ; then true ; \
- else exit 1 ; fi \
- ;; \
- *) \
- if (rootme=`pwd` ; export rootme ; \
- cd ./$$i ; \
- $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
- else exit 1 ; fi \
- ;; \
- esac ; \
- else true ; fi ; \
- done
-
-# The "else true" stuff is for Ultrix; the shell returns the exit code
-# of the "if" command, if no commands are run in the "then" or "else" part,
-# causing Make to quit.
-
-MAKEDIRS= \
- $(prefix) \
- $(exec_prefix) \
- $(tooldir)
-
-# $(bindir) \
-# $(libdir) \
-# $(includedir) \
-# $(datadir) \
-# $(docdir) \
-# $(mandir) \
-# $(man1dir) \
-# $(man5dir)
-
-# $(man2dir) \
-# $(man3dir) \
-# $(man4dir) \
-# $(man6dir) \
-# $(man7dir) \
-# $(man8dir)
-
-install-dirs:
- for i in $(MAKEDIRS) ; do \
- echo Making $$i... ; \
- parent=`echo $$i|sed -e 's@/[^/]*$$@@'`; \
- if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi ; \
- if [ ! -d $$i ] ; then \
- if mkdir $$i ; then \
- true ; \
- else \
- exit 1 ; \
- fi ; \
- else \
- true ; \
- fi ; \
- done
-
-install-info-dirs:
- if [ -d $(prefix) ] ; then true ; else mkdir $(prefix) ; fi
-
-dir.info:
- $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new
- mv -f dir.info.new dir.info
dist:
@echo "Building a full distribution of this tree isn't done"
etags tags: TAGS
-TAGS:
- etags `$(MAKE) ls`
-
-ls:
- @echo Makefile
- @for i in $(SUBDIRS); \
- do \
- (cd $$i; \
- pwd=`pwd`; \
- wd=`basename $$pwd`; \
- for j in `$(MAKE) ls`; \
- do \
- echo $$wd/$$j; \
- done) \
- done
-
-force:
+# Right now this just builds TAGS in each subdirectory. emacs19 has the
+# ability to use several tags files at once, so there is probably no need
+# to combine them into one big TAGS file (like CVS 1.3 does). We could
+# (if we felt like it) have this Makefile write a piece of elisp which
+# the user could load to tell emacs19 where all the TAGS files we just
+# built are.
+TAGS: do-TAGS
# with the gnu make, this is done automatically.
-Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
+Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag)
$(SHELL) ./config.status
#
-# Build GDB distributions that contain BFD, Include, Libiberty, Readline, etc
+# Support for building net releases
+# Files in devo used in any net release.
+# ChangeLog omitted because it may refer to files which are not in this
+# distribution (perhaps it would be better to include it anyway).
DEVO_SUPPORT= README Makefile.in configure configure.in \
- config.guess config.sub config etc move-if-change \
- COPYING.LIB
-GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline glob
-GDB_SUPPORT_FILES= $(GDB_SUPPORT_DIRS)
-
-setup-dirs: force
+ config.guess config.sub config move-if-change \
+ mpw-README mpw-build.in mpw-config.in mpw-configure \
+ COPYING COPYING.LIB install.sh
+
+# Files in devo/etc used in any net release.
+# ChangeLog omitted because it may refer to files which are not in this
+# distribution (perhaps it would be better to include it anyway).
+ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
+ configure.texi standards.texi make-stds.texi
+ETC_SUPPORT_PFX=configure.info standards.info cfg-paper.info
+
+# When you use `make setup-dirs' or `make taz' you should always redefine
+# this macro.
+SUPPORT_FILES = list-of-support-files-for-tool-in-question
+# Directories that might want `make diststuff' run.
+DISTSTUFFDIRS= ld gprof gdb libg++ binutils gnats gas
+# Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
+DISTBISONFILES= binutils/Makefile.in gas/Makefile.in gdb/Makefile.in
+# Directories where "info" should be built.
+DISTDOCDIRS= ld gprof binutils gas bfd libg++ libio gdb gnats send-pr etc
+
+.PHONY: taz
+
+taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \
+ texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
+ # Make sure "diststuff" files get built properly.
+ for f in $(DISTBISONFILES) ; do \
+ if [ -r $$f ]; then \
+ sed '/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp ; \
+ mv -f tmp $$f ; \
+ else true; fi ; \
+ done
+ # Take out texinfo from a few places; make simple BISON=bison line.
+ sed -e '/^all\.normal: /s/\all-texinfo //' \
+ -e '/^ install-texinfo /d' \
+ -e '/^BISON = /,/^$$/d' \
+ -e '/^# BISON:/s/.*/BISON = bison -y/' \
+ <Makefile.in >tmp
+ mv -f tmp Makefile.in
+ #
+ $(start-sanitize-Sanitize)
+ @if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ;
+ $(end-sanitize-Sanitize)
./configure sun4
- make clean
- ./configure -rm sun4
- chmod og=u `find $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) -print`
-
-gdb.tar.Z: setup-dirs
- (cd gdb; $(MAKE) -f Makefile.in make-proto-gdb.dir)
- $(MAKE) $(MFLAGS) -f Makefile.in make-gdb.tar.Z
-
-make-gdb.tar.Z: $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS) gdb texinfo/fsf/texinfo.tex
- rm -rf proto-toplev; mkdir proto-toplev
- ln -s ../gdb/proto-gdb.dir proto-toplev/gdb
- (cd proto-toplev; for i in $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS); do \
- ln -s ../$$i . ; \
- done)
- # Put only one copy (four hard links) of COPYING in the tar file.
- rm proto-toplev/bfd/COPYING
- ln proto-toplev/gdb/COPYING proto-toplev/bfd/COPYING
- rm proto-toplev/include/COPYING
- ln proto-toplev/gdb/COPYING proto-toplev/include/COPYING
- rm proto-toplev/readline/COPYING
- ln proto-toplev/gdb/COPYING proto-toplev/readline/COPYING
+ # Doc files don't change; include them in distribution.
+ for f in $(DISTDOCDIRS) ; do \
+ if [ -r $$f/Makefile ]; then \
+ (cd $$f ; $(MAKE) info) || exit 1 ; \
+ else true ; fi ; \
+ done
+ # Make links, and run "make diststuff" when needed.
+ # The `echo' for setting `p' is to convert all whitespace to spaces.
+ # Then the `case' further below should tell whether $$d is in
+ # DISTSTUFFDIRS.
+ rm -rf proto-toplev ; mkdir proto-toplev
+ set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
+ p=" `echo $(DISTSTUFFDIRS)` " ; \
+ for d in $$dirs ; do \
+ if [ -d $$d ]; then \
+ case " $$p " in \
+ *" $$d "*) \
+ (cd $$d ; $(MAKE) diststuff ) || exit 1 ;; \
+ esac ; \
+ if [ -d $$d/proto-$$d.dir ]; then \
+ ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
+ else \
+ ln -s ../$$d proto-toplev/$$d ; \
+ fi ; \
+ else ln -s ../$$d proto-toplev/$$d ; fi ; \
+ done
+ $(MAKE) distclean
+ #
+ mkdir proto-toplev/etc
+ (cd proto-toplev/etc; \
+ for i in $(ETC_SUPPORT); do \
+ ln -s ../../etc/$$i . ; \
+ done ; \
+ for i in $(ETC_SUPPORT_PFX); do \
+ ln -s ../../etc/$$i* . ; \
+ done)
+ #
# Take out texinfo from configurable dirs
rm proto-toplev/configure.in
- sed '/^configdirs=/s/texinfo //' <configure.in >proto-toplev/configure.in
- # Take out glob from buildable dirs
- rm proto-toplev/Makefile.in
-
- sed -e '/^SUBDIRS =/s/glob //' \
- -e '/^all\.normal: /s/\all-texinfo //' \
- -e '/^clean: /s/clean-texinfo //' \
- -e '/^install\.all: /s/install-texinfo //' \
- <Makefile.in >proto-toplev/Makefile.in
-
+ sed -e '/^host_tools=/s/texinfo //' \
+ <configure.in >proto-toplev/configure.in
+ #
mkdir proto-toplev/texinfo
- mkdir proto-toplev/texinfo/fsf
- ln -s ../../../texinfo/fsf/texinfo.tex proto-toplev/texinfo/fsf/
- chmod og=u `find proto-toplev -print`
- (VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
- echo "==> Making gdb-$$VER.tar.Z"; \
- ln -s proto-toplev gdb-$$VER; \
- tar cfh - gdb-$$VER \
- | compress -v >gdb-$$VER.tar.Z)
+ ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
+ ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
+ ln -s ../../texinfo/lgpl.texinfo proto-toplev/texinfo/
+ ln -s ../../texinfo/tex3patch proto-toplev/texinfo/
+ chmod og=u `find . -print`
+ (VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
+ echo "==> Making $(TOOL)-$$VER.tar.gz"; \
+ rm -f $(TOOL)-$$VER; ln -s proto-toplev $(TOOL)-$$VER; \
+ tar cfh - $(TOOL)-$$VER \
+ | $(GZIPPROG) -v -9 >$(TOOL)-$$VER.tar.gz )
+
+TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
+DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
+
+.PHONY: gas.tar.gz
+GAS_SUPPORT_DIRS= bfd include libiberty opcodes
+gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
+ $(MAKE) -f Makefile.in taz TOOL=gas \
+ SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
+
+# The FSF "binutils" release includes gprof and ld.
+.PHONY: binutils.tar.gz
+BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof
+binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
+ $(MAKE) -f Makefile.in taz TOOL=binutils \
+ SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
+
+.PHONY: gas+binutils.tar.gz
+GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
+gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
+ $(MAKE) -f Makefile.in taz TOOL=gas \
+ SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
+
+.PHONY: libg++.tar.gz
+LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty xiberty
+libg++.tar.gz: $(DIST_SUPPORT) libg++
+ $(MAKE) -f Makefile.in taz TOOL=libg++ \
+ SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
+
+GNATS_SUPPORT_DIRS=include libiberty send-pr
+gnats.tar.gz: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
+ $(MAKE) -f Makefile.in taz TOOL=gnats \
+ SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
+
+.PHONY: gdb.tar.gz
+GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils
+GDBTK_SUPPORT_DIRS= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi`
+gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in taz TOOL=gdb \
+ SUPPORT_FILES="$(GDB_SUPPORT_DIRS) $(GDBTK_SUPPORT_DIRS)"
+
+.PHONY: newlib.tar.gz
+NEWLIB_SUPPORT_DIRS=libgloss
+# taz configures for the sun4 target which won't configure newlib.
+# We need newlib configured so that the .info files are made.
+# Unfortunately, it is not enough to just configure newlib separately:
+# taz will build the .info files but since SUBDIRS won't contain newlib,
+# distclean won't be run (leaving Makefile, config.status, and the tmp files
+# used in building the .info files, eg: *.def, *.ref).
+# Compensate here by configuring newlib for a simple (no multilib support)
+# cross target (sparc64), building the info files, and doing make distclean
+# ourselves.
+newlib.tar.gz: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
+ rootme=`pwd` ; \
+ cd newlib && ../configure --srcdir $$rootme/newlib \
+ --host sun4 --target sparc64-elf
+ cd newlib ; make info
+ cd newlib ; make distclean
+ $(MAKE) -f Makefile.in taz TOOL=newlib \
+ SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
+ DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" \
+ DISTDOCDIRS="$(DISTDOCDIRS) newlib"
+.NOEXPORT:
+MAKEOVERRIDES=
+
+# start-sanitize-chill
+## This is ugly, but I don't want GNU make to put these variables in
+## the environment. Older makes will see this as a set of targets
+## with no dependencies and no actions.
+unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
+# end-sanitize-chill
# end of Makefile.in
projects / deliverable / binutils-gdb.git / blobdiff