AR = ar
AR_FLAGS = rc
CC = cc
+
+# We don't specify -g -O because many compilers don't support -g -O,
+# and/or -O is broken in and of itself.
CFLAGS = -g
+
# start-sanitize-chill
CHILLFLAGS = $(CFLAGS)
CHILL_LIB = -lchill
# end-sanitize-chill
CXX = gcc
+
+# Use -O to stress test the compiler.
CXXFLAGS = -g -O
+
RANLIB = ranlib
NM = nm
MUNCH_NM = $(NM)
GZIP = gzip
-COMPRESS = compress
# BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
BISON = `if [ -f $${rootme}/byacc/byacc ] ; \
then echo $${rootme}/flex/flex ; \
else echo flex ; fi`
+M4 = `if [ -f $${rootme}/m4/m4 ] ; \
+ then echo $${rootme}/m4/m4 ; \
+ else echo m4 ; fi`
+
MAKEINFO = `if [ -f $${rootme}/texinfo/makeinfo/makeinfo ] ; \
then echo $${rootme}/texinfo/makeinfo/makeinfo ; \
else echo makeinfo ; fi`
+
# This just becomes part of the MAKEINFO definition passed down to
# sub-makes. It lets flags be given on the command line while still
# using the makeinfo from the object tree.
fi`
AR_FOR_TARGET = ` \
- if [ -f $${rootme}/binutils/Makefile ] ; then \
+ if [ -f $${rootme}/binutils/ar ] ; then \
echo $${rootme}/binutils/ar ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
fi`
RANLIB_FOR_TARGET = ` \
- if [ -f $${rootme}/binutils/Makefile ] ; then \
+ if [ -f $${rootme}/binutils/ranlib ] ; then \
echo $${rootme}/binutils/ranlib ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo ; \
fi`
-PRMS = all-prms
-
#### host and target specific makefile fragments come in here.
###
"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
"CXXFLAGS=$(CXXFLAGS)" \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
- "GCC_FOR_TARGET=$$(CC_FOR_TARGET)" \
+ "GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_XFORM=$(INSTALL_XFORM)" \
"LDFLAGS=$(LDFLAGS)" \
"LEX=$(LEX)" \
- "LOADLIBES=$(LOADLIBES)" \
+ "M4=$(M4)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
"MUNCH_NM=$(MUNCH_NM)" \
"NM_FOR_TARGET=$(NM_FOR_TARGET)" \
- "PRMS=$(PRMS)" \
"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
+ "SHELL=$(SHELL)" \
"EXPECT=$(EXPECT)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
all-cvs \
all-dejagnu \
all-diff \
+ all-dosutils \
all-etc \
all-fileutils \
all-find \
all-make \
all-mmalloc \
all-opcodes \
+ all-pagas \
all-patch \
all-prms \
all-rcs \
check-make \
check-mmcheckoc \
check-opcodes \
+ check-pagas \
check-patch \
check-prms \
check-rcs \
install-make \
install-mmalloc \
install-opcodes \
+ install-pagas \
install-patch \
install-prms \
install-rcs \
ALL_X11_MODULES = \
all-emacs \
all-expect \
+ all-gash \
all-tclX \
all-tk
CHECK_X11_MODULES = \
check-emacs \
check-expect \
+ check-gash \
check-tclX \
check-tk
INSTALL_X11_MODULES = \
install-emacs \
install-expect \
+ install-gash \
install-tclX \
install-tk
$(start-sanitize-chill) \
all-chillrt \
$(end-sanitize-chill) \
+ all-libio \
all-libg++ \
all-newlib \
all-xiberty
$(start-sanitize-chill) \
check-chillrt \
$(end-sanitize-chill) \
+ check-libio \
check-libg++ \
check-newlib \
check-xiberty
$(start-sanitize-chill) \
install-chillrt \
$(end-sanitize-chill) \
+ install-libio \
install-libg++ \
install-newlib \
install-xiberty
# This is a shell case of all modules which are compiled using
# $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
-TARGET_LIBS = libg++ | newlib | xiberty
+TARGET_LIBS = libio | libg++ | newlib | xiberty
# start-sanitize-chill
-TARGET_LIBS = chillrt | libg++ | newlib | xiberty
+TARGET_LIBS = chillrt | libio | libg++ | newlib | xiberty
# end-sanitize-chill
# The first rule in the file had better be this one. Don't put any above it.
mv gcc/include gcc/tmp-include 2>/dev/null; \
mkdir gcc/include; \
cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
- touch gcc/stmp-fixinc; \
+ touch gcc/stmp-fixinc gcc/stmp-fixproto; \
rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
rootme=`pwd`; export rootme; \
srcroot=`cd $(srcdir); pwd` ; export srcroot; \
fi
# This is a list of inter-dependencies among modules.
-all-autoconf:
+all-autoconf: all-m4
all-bfd:
all-binutils: all-libiberty all-opcodes all-bfd all-flex
all-byacc:
all-find:
all-flex: all-libiberty all-byacc
all-gas: all-libiberty all-opcodes all-bfd
+all-gash: all-tcl
all-gawk:
-all-gcc: all-libiberty all-byacc all-binutils all-gas
+all-gcc: all-libiberty all-byacc all-binutils all-gas all-pagas
all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc all-sim
all-glob:
all-gprof: all-libiberty all-bfd
-all-grep:
+all-grep: all-libiberty
all-gzip: all-libiberty
all-hello: all-libiberty
all-indent:
all-ispell: all-emacs
all-ld: all-libiberty all-bfd all-byacc all-flex
-all-libg++: all-gas all-ld all-gcc all-xiberty all-newlib
+all-libg++: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib all-libio
+all-libio: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib
all-libiberty:
all-m4: all-libiberty
all-make: all-libiberty
all-mmalloc:
-all-newlib: all-binutils all-gas all-gcc
+all-newlib: all-binutils all-gas all-pagas all-gcc
all-opcodes: all-bfd
all-patch:
-all-prms:
+all-prms: all-libiberty
all-rcs:
all-readline:
all-recode: all-libiberty
-all-sed:
-all-send-pr:
+all-sed: all-libiberty
+all-send-pr: all-prms
all-shellutils:
all-sim: all-libiberty all-bfd
all-tar: all-libiberty
install-dirs:
@for i in $(MAKEDIRS) ; do \
echo Making $$i... ; \
- parent=`echo $$i|sed -e 's@/[^/]*$$@@'`; \
+ parent=`echo $$i | sed -e 's@/[^/]*$$@@' | sed -e 's@^$$@/@'`; \
if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi ; \
if [ ! -d $$i ] ; then \
if mkdir $$i ; then \
# with the gnu make, this is done automatically.
-Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
+Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag)
$(SHELL) ./config.status
#
-# Build GDB distributions that contain BFD, Include, Libiberty, Readline, etc
+# Support for building net releases
+# Files in devo used in any net release.
+# ChangeLog omitted because it may refer to files which are not in this
+# distribution (perhaps it would be better to include it anyway).
DEVO_SUPPORT= README Makefile.in configure configure.in \
config.guess config.sub config move-if-change \
COPYING COPYING.LIB install.sh
+
+# Files in devo/etc used in any net release.
+# ChangeLog omitted because it may refer to files which are not in this
+# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
configure.texi standards.texi make-stds.texi
+
GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline glob sim
GDB_SUPPORT_FILES= $(GDB_SUPPORT_DIRS)
-.PHONY: setup-dirs-gdb gdb.tar.Z make-gdb.tar.Z
+.PHONY: setup-dirs-gdb gdb.tar.gz make-gdb.tar.gz
setup-dirs-gdb:
./configure sun4
$(MAKE) clean
./configure -rm sun4
chmod og=u `find etc $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) -print`
-gdb.tar.Z: setup-dirs-gdb
+gdb.tar.gz: setup-dirs-gdb
(cd gdb; $(MAKE) -f Makefile.in make-proto-gdb.dir BISON="byacc")
(cd gdb; $(MAKE) -f Makefile.in make-proto-testsuite.dir)
- $(MAKE) $(MFLAGS) -f Makefile.in make-gdb.tar.Z
+ $(MAKE) $(MFLAGS) -f Makefile.in make-gdb.tar.gz
-make-gdb.tar.Z: $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS) gdb texinfo/texinfo.tex
+make-gdb.tar.gz: $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS) gdb texinfo/texinfo.tex
rm -rf proto-toplev; mkdir proto-toplev
ln -s ../gdb/proto-gdb.dir proto-toplev/gdb
(cd proto-toplev; for i in $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS); do \
rm proto-toplev/readline/COPYING
ln proto-toplev/gdb/COPYING proto-toplev/readline/COPYING
+ # Change the bug reporting address in configure to bug-gdb
+ rm proto-toplev/configure
+ sed -e 's/configure@cygnus.com/bug-gdb@prep.ai.mit.edu/' \
+ <configure >proto-toplev/configure
+ chmod a+x proto-toplev/configure
+
# Take out texinfo and glob from configurable dirs
rm proto-toplev/configure.in
sed -e '/^host_tools=/s/texinfo //' \
mkdir proto-toplev/texinfo
ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
+ ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
ln -s ../../texinfo/tex3patch proto-toplev/texinfo/
chmod og=u `find proto-toplev -print`
(VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
- ln -s proto-toplev gdb-$$VER; \
- echo "==> Making gdb-$$VER.tar.Z"; \
- tar cfh - gdb-$$VER | $(COMPRESS) -v >gdb-$$VER.tar.Z; \
echo "==> Making gdb-$$VER.tar.gz"; \
- tar cfh - gdb-$$VER | $(GZIP) -v -9 >gdb-$$VER.tar.gz)
+ rm -f gdb-$$VER; ln -s proto-toplev gdb-$$VER; \
+ tar cfh - gdb-$$VER \
+ | $(GZIP) -v -9 >gdb-$$VER.tar.gz)
# Make the testsuite archive separately.
ln -s ../../gdb/proto-testsuite.dir/testsuite proto-toplev/gdb/testsuite
ln proto-toplev/gdb/COPYING proto-toplev/gdb/testsuite/COPYING
chmod og=u `find proto-toplev/gdb/testsuite -print`
(VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
- echo "==> Making gdb-$$VER-testsuite.tar.Z"; \
- tar cfh - gdb-$$VER/configure gdb-$$VER/config.guess \
- gdb-$$VER/config.sub gdb-$$VER/move-if-change \
- gdb-$$VER/gdb/testsuite | \
- $(COMPRESS) -v >gdb-$$VER-testsuite.tar.Z; \
echo "==> Making gdb-$$VER-testsuite.tar.gz"; \
tar cfh - gdb-$$VER/configure gdb-$$VER/config.guess \
gdb-$$VER/config.sub gdb-$$VER/move-if-change \
- gdb-$$VER/gdb/testsuite | \
- $(GZIP) -v -9 >gdb-$$VER-testsuite.tar.gz)
+ gdb-$$VER/gdb/testsuite \
+ | $(GZIP) -v -9 >gdb-$$VER-testsuite.tar.gz)
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question
# Directories that might want `make diststuff' run.
-DISTSTUFFDIRS= ld gprof gdb libg++
+DISTSTUFFDIRS= ld gprof gdb libg++ binutils
+# Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
+DISTBISONFILES= binutils/Makefile.in gas/Makefile.in gdb/Makefile.in
+# Directories where "info" should be built.
+DISTDOCDIRS= ld gprof binutils gas bfd libg++ libio gdb gnats send-pr
.PHONY: taz
-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex texinfo/gpl.texinfo
+taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \
+ texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
+ # Make sure "diststuff" files get built properly.
+ for f in $(DISTBISONFILES) ; do \
+ if [ -r $$f ]; then \
+ sed '/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp ; \
+ mv -f tmp $$f ; \
+ else true; fi ; \
+ done
+ # Take out texinfo from a few places; make simple BISON=bison line.
+ sed -e '/^all\.normal: /s/\all-texinfo //' \
+ -e '/^ install-texinfo /d' \
+ -e '/^BISON = /,/^$$/d' \
+ -e '/^# BISON:/s/.*/BISON = bison -y/' \
+ <Makefile.in >tmp
+ mv -f tmp Makefile.in
+ #
./configure sun4
+ # Doc files don't change; include them in distribution.
+ for f in $(DISTDOCDIRS) ; do \
+ if [ -r $$f/Makefile ]; then \
+ (cd $$f ; $(MAKE) info) || exit 1 ; \
+ else true ; fi ; \
+ done
# Make links, and run "make diststuff" when needed.
# The `echo' for setting `p' is to convert all whitespace to spaces.
# Then the `case' further below should tell whether $$d is in
case " $$p " in \
*" $$d "*) \
echo making diststuff in $$d ; \
- (cd $$d ; $(MAKE) diststuff) || exit 1 ;; \
+ (cd $$d ; pwd ; $(MAKE) diststuff ) || exit 1 ;; \
esac ; \
if [ -d $$d/proto-$$d.dir ]; then \
ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
-e '/^host_libs=/s/glob //' \
<configure.in >proto-toplev/configure.in
#
- # Take out texinfo from a few places; make simple BISON=bison line.
- rm proto-toplev/Makefile.in
- sed -e '/^all\.normal: /s/\all-texinfo //' \
- -e '/^ install-texinfo /d' \
- -e '/^BISON = /,/^$$/d' \
- -e '/^# BISON:/s/.*/BISON = bison -y/' \
- <Makefile.in >proto-toplev/Makefile.in
- #
mkdir proto-toplev/texinfo
ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
+ ln -s ../../texinfo/lgpl.texinfo proto-toplev/texinfo/
ln -s ../../texinfo/tex3patch proto-toplev/texinfo/
chmod og=u `find . -print`
(VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
echo "==> Making $(TOOL)-$$VER.tar.gz"; \
rm -f $(TOOL)-$$VER; ln -s proto-toplev $(TOOL)-$$VER; \
tar cfh - $(TOOL)-$$VER \
- | $(GZIP) -v -9 >$(TOOL)-$$VER.tar.gz)
+ | $(GZIP) -v -9 > $(TOOL)-$$VER.tar.gz )
-TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo
+TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
.PHONY: gas.tar.gz
GAS_SUPPORT_DIRS= bfd include libiberty opcodes
gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
- $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GAS_SUPPORT_DIRS)" TOOL=gas
+ $(MAKE) -f Makefile.in taz TOOL=gas \
+ SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
# The FSF "binutils" release includes gprof and ld.
.PHONY: binutils.tar.gz
BINUTILS_SUPPORT_DIRS= bfd include libiberty opcodes ld gprof
binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
- $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)" TOOL=binutils
+ $(MAKE) -f Makefile.in taz TOOL=binutils \
+ SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
.PHONY: gas+binutils.tar.gz
GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
- $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GASB_SUPPORT_DIRS)" TOOL=gas
+ $(MAKE) -f Makefile.in taz TOOL=gas \
+ SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
.PHONY: libg++.tar.gz
-LIBGXX_SUPPORT_DIRS=include libiberty xiberty
+LIBGXX_SUPPORT_DIRS=include libio libiberty xiberty
libg++.tar.gz: $(DIST_SUPPORT) libg++
- $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)" TOOL=libg++
+ $(MAKE) -f Makefile.in taz TOOL=libg++ \
+ SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
+
+GNATS_SUPPORT_DIRS=include libiberty send-pr
+gnats.tar.gz: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
+ $(MAKE) -f Makefile.in taz TOOL=gnats \
+ SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
.NOEXPORT:
MAKEOVERRIDES=
projects / deliverable / binutils-gdb.git / blobdiff