SHELL = /bin/sh
+# INSTALL_PROGRAM_ARGS is changed by configure.in to use -x for a
+# cygwin32 host.
+INSTALL_PROGRAM_ARGS =
+
INSTALL = $(SHELL) $$s/install-sh -c
-INSTALL_PROGRAM = $(INSTALL)
+INSTALL_PROGRAM = $(INSTALL) $(INSTALL_PROGRAM_ARGS)
+INSTALL_SCRIPT = $(INSTALL)
INSTALL_DATA = $(INSTALL) -m 644
INSTALL_DOSREL = install-dosrel-fake
HOST_PREFIX =
HOST_PREFIX_1 = loser-
-# We don't specify -g -O because many compilers don't support -g -O,
-# and/or -O is broken in and of itself.
+# These flag values are normally overridden by the configure script.
CFLAGS = -g
+CXXFLAGS = -g -O2
+
LIBCFLAGS = $(CFLAGS)
CFLAGS_FOR_TARGET = $(CFLAGS)
LDFLAGS_FOR_TARGET =
CXX = c++
# Use -O2 to stress test the compiler.
-CXXFLAGS = -g -O2
LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
RANLIB = ranlib
DLLTOOL = dlltool
+WINDRES = windres
NM = nm
if [ -f $$r/gcc/xgcc ] ; then \
if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
if [ -f $$r/$(TARGET_SUBDIR)/winsup/Makefile ] ; then \
- echo $$r/gcc/xgcc -B$$r/gcc/ -B$$r/newlib/ -L$$r/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -B$$r/newlib/ -L$$r/$(TARGET_SUBDIR)/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
else \
echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
fi; \
fi`
AS_FOR_TARGET = ` \
- if [ -f $$r/gas/as.new ] ; then \
- echo $$r/gas/as.new ; \
+ if [ -f $$r/gas/as-new ] ; then \
+ echo $$r/gas/as-new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(AS); \
fi`
LD_FOR_TARGET = ` \
- if [ -f $$r/ld/ld.new ] ; then \
- echo $$r/ld/ld.new ; \
+ if [ -f $$r/ld/ld-new ] ; then \
+ echo $$r/ld/ld-new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(LD); \
fi; \
fi`
+WINDRES_FOR_TARGET = ` \
+ if [ -f $$r/binutils/windres ] ; then \
+ echo $$r/binutils/windres ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(WINDRES); \
+ else \
+ t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
AR_FOR_TARGET = ` \
if [ -f $$r/binutils/ar ] ; then \
echo $$r/binutils/ar ; \
fi`
NM_FOR_TARGET = ` \
- if [ -f $$r/binutils/nm.new ] ; then \
- echo $$r/binutils/nm.new ; \
+ if [ -f $$r/binutils/nm-new ] ; then \
+ echo $$r/binutils/nm-new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(NM); \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
+ "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
"LDFLAGS=$(LDFLAGS)" \
"LEX=$(LEX)" \
"LD_FOR_TARGET=$(LD_FOR_TARGET)" \
"EXPECT=$(EXPECT)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
+ "WINDRES_FOR_TARGET=$(WINDRES_FOR_TARGET)" \
"YACC=$(BISON)" \
"exec_prefix=$(exec_prefix)" \
"prefix=$(prefix)" \
'DLLTOOL=$(DLLTOOL)' \
'LD=$(LD)' \
'NM=$(NM)' \
- 'RANLIB=$(RANLIB)'
-
+ 'RANLIB=$(RANLIB)' \
+ 'WINDRES=$(WINDRES)'
FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
'NM=$$(NM_FOR_TARGET)' \
'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
- 'RANLIB=$$(RANLIB_FOR_TARGET)'
+ 'RANLIB=$$(RANLIB_FOR_TARGET)' \
+ 'WINDRES=$$(WINDRES_FOR_TARGET)'
TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
'NM=$(NM)' \
'RANLIB=$$(RANLIB_FOR_TARGET)' \
+ 'WINDRES=$$(WINDRES_FOR_TARGET)' \
"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
- `if test x"$(LANGUAGES)" != x; then echo "LANGUAGES=$(LANGUAGES)"; fi` \
- `if test x"$(STMP_FIXPROTO)" != x; then echo "STMP_FIXPROTO=$(STMP_FIXPROTO)"; fi` \
- `if test x"$(LIMITS_H_TEST)" != x; then echo "LIMITS_H_TEST=$(LIMITS_H_TEST)"; fi` \
- `if test x"$(LIBGCC1_TEST)" != x; then echo "LIBGCC1_TEST=$(LIBGCC1_TEST)"; fi` \
- `if test x"$(LIBGCC2_CFLAGS)" != x; then echo "LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)"; fi` \
- `if test x"$(LIBGCC2_DEBUG_CFLAGS)" != x; then echo "LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)"; fi` \
- `if test x"$(LIBGCC2_INCLUDES)" != x; then echo "LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)"; fi` \
- `if test x"$(ENQUIRE)" != x; then echo "ENQUIRE=$(ENQUIRE)"; fi` \
- `if test x"$(BOOT_CFLAGS)" != x; then echo "BOOT_CFLAGS=$(BOOT_CFLAGS)"; fi`
+ "`if test x'$(LANGUAGES)' != x; then echo 'LANGUAGES=$(LANGUAGES)'; else echo 'XFOO=bar'; fi`" \
+ "`if test x'$(STMP_FIXPROTO)' != x; then echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)'; else echo 'XFOO=bar'; fi`" \
+ "`if test x'$(LIMITS_H_TEST)' != x; then echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)'; else echo 'XFOO=bar'; fi`" \
+ "`if test x'$(LIBGCC1_TEST)' != x; then echo 'LIBGCC1_TEST=$(LIBGCC1_TEST)'; else echo 'XFOO=bar'; fi`" \
+ "`if test x'$(LIBGCC2_CFLAGS)' != x; then echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)'; else echo 'XFOO=bar'; fi`" \
+ "`if test x'$(LIBGCC2_DEBUG_CFLAGS)' != x; then echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)'; else echo 'XFOO=bar'; fi`" \
+ "`if test x'$(LIBGCC2_INCLUDES)' != x; then echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)'; else echo 'XFOO=bar'; fi`" \
+ "`if test x'$(ENQUIRE)' != x; then echo 'ENQUIRE=$(ENQUIRE)'; else echo 'XFOO=bar'; fi`" \
+ "`if test x'$(BOOT_CFLAGS)' != x; then echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)'; else echo 'XFOO=bar'; fi`"
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
all-inet \
all-ispell \
all-itcl \
+ $(start-sanitize-ide) \
+ all-jstools \
+ $(end-sanitize-ide) \
all-ld \
all-libiberty \
$(start-sanitize-ide) \
check-inet \
check-ispell \
check-itcl \
+ $(start-sanitize-ide) \
+ check-jstools \
+ $(end-sanitize-ide) \
check-ld \
check-libiberty \
$(start-sanitize-ide) \
install-inet \
install-ispell \
install-itcl \
+ $(start-sanitize-ide) \
+ install-jstools \
+ $(end-sanitize-ide) \
install-ld \
install-libiberty \
$(start-sanitize-ide) \
all-gash \
all-guile \
all-tclX \
- all-tk
+ all-tk \
+ all-tix
# This is a list of the check targets for all of the modules which are
# compiled using $(X11_FLAGS_TO_PASS).
check-guile \
check-expect \
check-gash \
- check-tclX
+ check-tclX \
+ check-tk \
+ check-tix
# This is a list of the install targets for all the modules which are
# compiled using $(X11_FLAGS_TO_PASS).
install-expect \
install-gash \
install-tclX \
- install-tk
+ install-tk \
+ install-tix
# This is a list of the targets for all of the modules which are compiled
# using $(TARGET_FLAGS_TO_PASS).
all-target-winsup \
all-target-libgloss \
all-target-libiberty \
+ all-target-gperf \
all-target-examples
# This is a list of the configure targets for all of the modules which
configure-target-winsup \
configure-target-libgloss \
configure-target-libiberty \
+ configure-target-gperf \
configure-target-examples
# This is a list of the check targets for all of the modules which are
check-target-libg++ \
check-target-newlib \
check-target-winsup \
- check-target-libiberty
+ check-target-libiberty \
+ check-target-gperf
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
install-target-newlib \
install-target-winsup \
install-target-libgloss \
- install-target-libiberty
+ install-target-libiberty \
+ install-target-gperf
# This is a list of the targets for which we can do a clean-{target}.
CLEAN_MODULES = \
clean-inet \
clean-ispell \
clean-itcl \
+ $(start-sanitize-ide) \
+ clean-jstools \
+ $(end-sanitize-ide) \
clean-ld \
clean-libiberty \
$(start-sanitize-ide) \
clean-target-winsup \
clean-target-libgloss \
clean-target-libiberty \
+ clean-target-gperf \
clean-target-examples
# All of the x11 modules that can be cleaned
clean-gash \
clean-guile \
clean-tclX \
- clean-tk
+ clean-tk \
+ clean-tix
# The first rule in the file had better be this one. Don't put any above it.
all: all.normal
done; \
;; \
esac ; \
- export AR AS CC CXX LD NM RANLIB DLLTOOL; \
+ export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
if (cd ./$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"RANLIB=$${RANLIB}" \
- "DLLTOOL=$${DLLTOOL}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
$${target}); \
then true; else exit 1; fi; \
else true; fi; \
for flag in $(EXTRA_TARGET_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
done; \
- export AR AS CC CXX LD NM RANLIB DLLTOOL; \
+ export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
if (cd $(TARGET_SUBDIR)/$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"RANLIB=$${RANLIB}" \
- "DLLTOOL=$${DLLTOOL}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
$${target}); \
then true; else exit 1; fi; \
else true; fi; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
cd $(TARGET_SUBDIR)/$${dir}; \
case $(srcdir) in \
# This rule is used to install the modules which use X11_FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: $(INSTALL_X11_MODULES)
-$(INSTALL_X11_MODULES):
+$(INSTALL_X11_MODULES): installdirs
@dir=`echo $@ | sed -e 's/install-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
ALL_GCC = all-gcc
all-gcc: all-byacc all-binutils all-gas all-ld
all-bootstrap: all-libiberty all-byacc all-binutils all-gas all-ld
-GDB_TK = all-tk all-tcl
+GDB_TK = all-tk all-tcl all-itcl all-tix
all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
all-gnuserv:
+configure-target-gperf: $(ALL_GCC)
+all-target-gperf: configure-target-gperf all-target-libiberty all-target-libg++
all-gprof: all-libiberty all-bfd all-opcodes
all-grep: all-libiberty
all-grez: all-libiberty all-bfd all-opcodes
all-inet: all-tcl all-send-pr all-perl
all-ispell: all-emacs19
all-itcl: all-tcl all-tk
+# start-sanitize-ide
+all-jstools: all-tcl all-tk all-libide
+# end-sanitize-ide
all-ld: all-libiberty all-bfd all-opcodes all-byacc all-flex
configure-target-libg++: $(ALL_GCC) configure-target-librx
all-target-libg++: configure-target-libg++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-librx all-target-libstdc++
all-send-pr: all-prms
all-shellutils:
all-sim: all-libiberty all-bfd all-opcodes
-all-sn: all-tcl all-tk all-itcl all-db
+all-sn: all-tcl all-tk all-itcl all-db all-grep
all-tar: all-libiberty
all-tcl:
all-tclX: all-tcl all-tk
all-textutils:
all-tgas: all-libiberty all-bfd all-opcodes
all-time:
+all-tix: all-tcl all-tk
# start-sanitize-ide
all-vmake: all-tcl all-tk all-itcl all-libide
# end-sanitize-ide
config.guess config.sub config move-if-change \
mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
- mkinstalldirs
+ mkinstalldirs ltconfig ltmain.sh missing ylwrap
# Files in devo/etc used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question
-# Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
-DISTBISONFILES= binutils/Makefile.in gas/Makefile.in gdb/Makefile.in ld/Makefile.in
.PHONY: taz
taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \
texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
- # Make sure "diststuff" files get built properly.
- for f in $(DISTBISONFILES) ; do \
- if [ -r $$f ]; then \
- sed '/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp ; \
- mv -f tmp $$f ; \
- else true; fi ; \
- done
# Take out texinfo from a few places; make simple BISON=bison line.
sed -e '/^all\.normal: /s/\all-texinfo //' \
-e '/^ install-texinfo /d' \
-e '/^BISON = `if/,/^$$/d' \
- -e '/^# BISON:/s/.*/BISON = bison -y/' \
+ -e '/^# BISON:/s/.*/BISON = $(DEFAULT_YACC)/' \
<Makefile.in >tmp
mv -f tmp Makefile.in
#
ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
else true; fi
chmod og=u `find . -print`
- $(MAKE) -f Makefile.in do-tar-gz TOOL=$(TOOL) \
- VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`
+ if grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
+ ver=`sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'`; \
+ else \
+ ver=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
+ fi; \
+ $(MAKE) -f Makefile.in do-tar-gz TOOL=$(TOOL) VER=$$ver
do-tar-gz:
echo "==> Making $(TOOL)-$(VER).tar.gz"
projects / deliverable / binutils-gdb.git / blobdiff