# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
-# Tell GNU make 3.79 not to run the top level in parallel. This
-# prevents contention for $builddir/$target/config.cache, as well
-# as minimizing scatter in file system caches.
-NOTPARALLEL = .NOTPARALLEL
-$(NOTPARALLEL):
-
VPATH=@srcdir@
links=@configlinks@
oldincludedir = @oldincludedir@
infodir = @infodir@
mandir = @mandir@
-gxx_include_dir=@gxx_include_dir@
+gxx_include_dir = @gxx_include_dir@
+libstdcxx_incdir = @libstdcxx_incdir@
tooldir = @tooldir@
build_tooldir = @build_tooldir@
AS = @AS@
AR = @AR@
AR_FLAGS = rc
-CC = cc
+CC = @CC@
# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
# here so that they can be overridden by Makefile fragments.
BUILD_PREFIX = @BUILD_PREFIX@
BUILD_PREFIX_1 = @BUILD_PREFIX_1@
-# These flag values are normally overridden by the configure script.
-CFLAGS = -g
-CXXFLAGS = -g -O2
+CFLAGS = @CFLAGS@
+CXXFLAGS = @CXXFLAGS@
LDFLAGS =
LIBCFLAGS = $(CFLAGS)
PICFLAG =
PICFLAG_FOR_TARGET =
-CXX = c++
+CXX = @CXX@
# Use -O2 to stress test the compiler.
LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
# Should be substed by configure.in
FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@
CC_FOR_TARGET = @CC_FOR_TARGET@
-BASE_CC_FOR_TARGET = @BASE_CC_FOR_TARGET@
CXX_FOR_TARGET = @CXX_FOR_TARGET@
RAW_CXX_FOR_TARGET = @RAW_CXX_FOR_TARGET@
CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = @CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(AS); \
else \
- t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
+ echo as | sed '$(program_transform_name)' ; \
fi; \
fi`
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(LD); \
else \
- t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
+ echo ld | sed '$(program_transform_name)' ; \
fi; \
fi`
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(DLLTOOL); \
else \
- t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
+ echo dlltool | sed '$(program_transform_name)' ; \
fi; \
fi`
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(WINDRES); \
else \
- t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \
+ echo windres | sed '$(program_transform_name)' ; \
fi; \
fi`
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(AR); \
else \
- t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
+ echo ar | sed '$(program_transform_name)' ; \
fi; \
fi`
echo ranlib; \
fi; \
else \
- t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
+ echo ranlib | sed '$(program_transform_name)' ; \
fi; \
fi`
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(NM); \
else \
- t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
+ echo nm | sed '$(program_transform_name)' ; \
fi; \
fi`
.PHONY: all
#### host and target specific makefile fragments come in here.
+@target_makefile_frag@
+@alphaieee_frag@
+@ospace_frag@
+@host_makefile_frag@
###
# Flags to pass down to all sub-makes.
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
-# This is a list of the configure targets for all of the modules which
-# are compiled using the target tools.
-CONFIGURE_TARGET_MODULES =[+
- FOR target_modules +] \
- configure-target-[+module+][+
- ENDFOR target_modules +]
-
-configure-target: $(CONFIGURE_TARGET_MODULES)
+configure-host: @configure_host_modules@
+configure-target: @configure_target_modules@
# This is a list of the targets for which we can do a clean-{target}.
CLEAN_MODULES =[+
@all_host_modules@ \
@all_target_modules@
+all-host: @all_host_modules@
all-target: @all_target_modules@
# Do a target for all the subdirectories. A ``make do-X'' will do a
done; \
;; \
esac ; \
- if (cd ./$$i; \
+ (cd ./$$i && \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- [+target+]); \
- then true; else exit 1; fi; \
+ [+target+]) \
+ || exit 1; \
else true; fi; \
done
# Break into two pieces
for flag in $(EXTRA_TARGET_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
- if (cd $(TARGET_SUBDIR)/$$i; \
+ (cd $(TARGET_SUBDIR)/$$i && \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- [+target+]); \
- then true; else exit 1; fi; \
+ [+target+]) \
+ || exit 1; \
else true; fi; \
done
[+ ENDFOR recursive_targets +]
installcheck: do-installcheck
dvi: do-dvi
-# Make sure makeinfo is built before we do a `make info'.
-do-info: all-texinfo
+# Make sure makeinfo is built before we do a `make info', if we're
+# in fact building texinfo.
+do-info: maybe-all-texinfo
install-info: do-install-info dir.info
s=`cd $(srcdir); ${PWD}`; export s; \
local-distclean:
-rm -f Makefile config.status config.cache mh-frag mt-frag
+ -rm -f multilib.out multilib.tmp maybedep.tmp serdep.tmp
-if [ "$(TARGET_SUBDIR)" != "." ]; then \
rm -rf $(TARGET_SUBDIR); \
else true; fi
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \
+ (cd $${dir} && $(MAKE) $(FLAGS_TO_PASS) clean); \
else \
true; \
fi
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) clean); \
+ (cd $(TARGET_SUBDIR)/$${dir} && $(MAKE) $(TARGET_FLAGS_TO_PASS) clean); \
else \
true; \
fi
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD}` ; export r ; \
$(SET_LIB_PATH) \
- (cd ./gcc; \
+ (cd ./gcc && \
$(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
else \
true ; \
# built are.
TAGS: do-TAGS
-
# --------------------------------------
# Modules which run on the build machine
# --------------------------------------
[+ FOR build_modules +]
.PHONY: configure-build-[+module+] maybe-configure-build-[+module+]
maybe-configure-build-[+module+]:
-configure-build-[+module+]: $(BUILD_SUBDIR)/[+module+]/Makefile
-$(BUILD_SUBDIR)/[+module+]/Makefile: config.status
- @[ -d $(BUILD_SUBDIR)/[+module+] ] || mkdir $(BUILD_SUBDIR)/[+module+];\
+configure-build-[+module+]:
+ @test ! -f $(BUILD_SUBDIR)/[+module+]/Makefile || exit 0; \
+ [ -d $(BUILD_SUBDIR)/[+module+] ] || \
+ mkdir $(BUILD_SUBDIR)/[+module+];\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
AR="$(AR_FOR_BUILD)"; export AR; \
# Modules which run on the host machine
# --------------------------------------
[+ FOR host_modules +]
+.PHONY: configure-[+module+] maybe-configure-[+module+]
+maybe-configure-[+module+]:
+configure-[+module+]:
+ @test ! -f [+module+]/Makefile || exit 0; \
+ [ -d [+module+] ] || mkdir [+module+]; \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ CC="$(CC)"; export CC; \
+ CFLAGS="$(CFLAGS)"; export CFLAGS; \
+ CXX="$(CXX)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
+ if [ z$(build_canonical) != z$(host_canoncial) ] ; then \
+ AR="$(AR)"; export AR; \
+ AS="$(AS)"; export AS; \
+ CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
+ DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
+ LD="$(LD)"; export LD; \
+ NM="$(NM)"; export NM; \
+ RANLIB="$(RANLIB)"; export RANLIB; \
+ WINDRES="$(WINDRES)"; export WINDRES; \
+ OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
+ OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
+ fi; \
+ echo Configuring in [+module+]; \
+ cd [+module+] || exit 1; \
+ case $(srcdir) in \
+ \.) \
+ srcdiroption="--srcdir=."; \
+ libsrcdir=".";; \
+ /* | [A-Za-z]:[\\/]*) \
+ srcdiroption="--srcdir=$(srcdir)/[+module+]"; \
+ libsrcdir="$$s/[+module+]";; \
+ *) \
+ srcdiroption="--srcdir=../$(srcdir)/[+module+]"; \
+ libsrcdir="$$s/[+module+]";; \
+ esac; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ || exit 1
+
.PHONY: all-[+module+] maybe-all-[+module+]
maybe-all-[+module+]:
-all-[+module+]:
+all-[+module+]: configure-[+module+]
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd [+module+]; $(MAKE) $(FLAGS_TO_PASS)[+
+ (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
IF with_x
+] $(X11_FLAGS_TO_PASS)[+
ENDIF with_x +] all)
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd [+module+]; $(MAKE) $(FLAGS_TO_PASS)[+
+ (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
IF with_x
+] $(X11_FLAGS_TO_PASS)[+
ENDIF with_x +] check); \
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd [+module+]; $(MAKE) $(FLAGS_TO_PASS)[+
+ (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
IF with_x
+] $(X11_FLAGS_TO_PASS)[+
ENDIF with_x +] check)
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd [+module+]; $(MAKE) $(FLAGS_TO_PASS)[+
+ (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
IF with_x
+] $(X11_FLAGS_TO_PASS)[+
ENDIF with_x +] install)
[+ FOR target_modules +]
.PHONY: configure-target-[+module+] maybe-configure-target-[+module+]
maybe-configure-target-[+module+]:
-configure-target-[+module+]: $(TARGET_SUBDIR)/[+module+]/Makefile
-
-$(TARGET_SUBDIR)/[+module+]/multilib.out: $(BASE_CC_FOR_TARGET)
- @[ -d $(TARGET_SUBDIR)/[+module+] ] || mkdir $(TARGET_SUBDIR)/[+module+];\
- r=`${PWD}`; export r; \
- echo "Configuring multilibs for [+module+]"; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/[+module+]/multilib.out 2> /dev/null
-$(TARGET_SUBDIR)/[+module+]/Makefile: config.status $(TARGET_SUBDIR)/[+module+]/multilib.out
- @[ -d $(TARGET_SUBDIR)/[+module+] ] || mkdir $(TARGET_SUBDIR)/[+module+];\
+# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
+$(TARGET_SUBDIR)/[+module+]/multilib.out: multilib.out
+ @[ -d $(TARGET_SUBDIR)/[+module+] ] || \
+ mkdir $(TARGET_SUBDIR)/[+module+]; \
+ rm -f $(TARGET_SUBDIR)/[+module+]/Makefile || : ; \
+ cp multilib.out $(TARGET_SUBDIR)/[+module+]/multilib.out
+
+configure-target-[+module+]: $(TARGET_SUBDIR)/[+module+]/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/[+module+]/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/[+module+] ] || \
+ mkdir $(TARGET_SUBDIR)/[+module+];\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/[+module+]; \
+ (cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) [+
IF raw_cxx
+] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/[+module+]; \
+ (cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) [+
IF raw_cxx
+] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/[+module+]; \
+ (cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) install)
[+ ENDIF no_install +]
[+ ENDFOR target_modules +]
# build modules. So GCC is a sort of hybrid.
# gcc is the only module which uses GCC_FLAGS_TO_PASS.
+.PHONY: configure-gcc maybe-configure-gcc
+maybe-configure-gcc:
+configure-gcc:
+ @test ! -f gcc/Makefile || exit 0; \
+ [ -d gcc ] || mkdir gcc; \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ CC="$(CC)"; export CC; \
+ CFLAGS="$(CFLAGS)"; export CFLAGS; \
+ CXX="$(CXX)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
+ if [ z$(build_canonical) != z$(host_canoncial) ] ; then \
+ AR="$(AR)"; export AR; \
+ AS="$(AS)"; export AS; \
+ CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
+ DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
+ LD="$(LD)"; export LD; \
+ NM="$(NM)"; export NM; \
+ RANLIB="$(RANLIB)"; export RANLIB; \
+ WINDRES="$(WINDRES)"; export WINDRES; \
+ OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
+ OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
+ fi; \
+ echo Configuring in gcc; \
+ cd gcc || exit 1; \
+ case $(srcdir) in \
+ \.) \
+ srcdiroption="--srcdir=."; \
+ libsrcdir=".";; \
+ /* | [A-Za-z]:[\\/]*) \
+ srcdiroption="--srcdir=$(srcdir)/gcc"; \
+ libsrcdir="$$s/gcc";; \
+ *) \
+ srcdiroption="--srcdir=../$(srcdir)/gcc"; \
+ libsrcdir="$$s/gcc";; \
+ esac; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ || exit 1
+
+# Don't 'make all' in gcc if it's already been made by 'bootstrap'; that
+# causes trouble. This wart will be fixed eventually by moving
+# the bootstrap behavior to this file.
.PHONY: all-gcc maybe-all-gcc
maybe-all-gcc:
-all-gcc:
- @if [ -f ./gcc/Makefile ] ; then \
+all-gcc: configure-gcc
+ @if [ -f gcc/stage_last ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
+ (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) quickstrap); \
else \
- true; \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
fi
# Building GCC uses some tools for rebuilding "source" files
# in parallel.
#
.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap
-bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap: all-bootstrap
+bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap: all-bootstrap configure-gcc
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
+ (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
else \
true; \
fi
-.PHONY: check-c++
-check-c++:
+.PHONY: check-gcc-c++
+check-gcc-c++:
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
- $(MAKE) check-target-libstdc++-v3; \
+ (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
else \
true; \
- fi
+ fi
+
+.PHONY: check-c++
+check-c++: check-target-libstdc++-v3 check-gcc-c++
.PHONY: install-gcc maybe-install-gcc
maybe-install-gcc:
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
else \
true; \
fi
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}` ; export s; \
$(SET_LIB_PATH) \
- (cd ./gcc; \
+ (cd ./gcc && \
$(MAKE) $(GCC_FLAGS_TO_PASS) install); \
rm -rf gcc/include; \
mv gcc/tmp-include gcc/include 2>/dev/null; \
# it's safer to use a soft dependency.
# Host modules specific to gcc.
+# GCC needs to identify certain tools.
+configure-gcc: maybe-configure-binutils maybe-configure-gas maybe-configure-ld maybe-configure-bison maybe-configure-flex
all-gcc: maybe-all-libiberty maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib
# This is a slightly kludgy method of getting dependencies on
# all-build-libiberty correct; it would be better to build it every time.
all-bootstrap: maybe-all-libiberty maybe-all-texinfo maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib
# Host modules specific to gdb.
+# GDB needs to know that the simulator is being built.
+configure-gdb: maybe-configure-tcl maybe-configure-tk maybe-configure-sim
GDB_TK = @GDB_TK@
all-gdb: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-mmalloc maybe-all-readline maybe-all-bison maybe-all-byacc maybe-all-sim $(gdbnlmrequirements) $(GDB_TK)
install-gdb: maybe-install-tcl maybe-install-tk maybe-install-itcl maybe-install-tix maybe-install-libgui
+configure-libgui: maybe-configure-tcl maybe-configure-tk
all-libgui: maybe-all-tcl maybe-all-tk maybe-all-itcl
# Host modules specific to binutils.
+configure-bfd: configure-libiberty
all-bfd: maybe-all-libiberty maybe-all-intl
all-binutils: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-flex maybe-all-bison maybe-all-byacc maybe-all-intl
# We put install-opcodes before install-binutils because the installed
# Other host modules in the 'src' repository.
all-dejagnu: maybe-all-tcl maybe-all-expect maybe-all-tk
+configure-expect: maybe-configure-tcl maybe-configure-tk
all-expect: maybe-all-tcl maybe-all-tk
+configure-itcl: maybe-configure-tcl maybe-configure-tk
all-itcl: maybe-all-tcl maybe-all-tk
# We put install-tcl before install-itcl because itcl wants to run a
# program on installation which uses the Tcl libraries.
install-itcl: maybe-install-tcl
all-sid: maybe-all-tcl maybe-all-tk
install-sid: maybe-install-tcl maybe-install-tk
-all-sim: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-readline
+all-sim: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-readline maybe-configure-gdb
+configure-tk: maybe-configure-tcl
all-tk: maybe-all-tcl
+configure-tix: maybe-configure-tcl maybe-configure-tk
all-tix: maybe-all-tcl maybe-all-tk
all-texinfo: maybe-all-libiberty
all-send-pr: maybe-all-prms
all-snavigator: maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-db maybe-all-grep maybe-all-libgui
all-tar: maybe-all-libiberty
-all-tclX: maybe-all-tcl maybe-all-tk
all-uudecode: maybe-all-libiberty
ALL_GCC = maybe-all-gcc
ALL_GCC_CXX = $(ALL_GCC_C) maybe-all-target-libstdc++-v3
# Target modules specific to gcc.
-$(TARGET_SUBDIR)/boehm-gc/Makefile: $(ALL_GCC_C) maybe-configure-target-qthreads
-$(TARGET_SUBDIR)/fastjar/Makefile: maybe-configure-target-zlib
+configure-target-boehm-gc: $(ALL_GCC_C) maybe-configure-target-qthreads
+configure-target-fastjar: maybe-configure-target-zlib
all-target-fastjar: maybe-all-target-zlib maybe-all-target-libiberty
-$(TARGET_SUBDIR)/libf2c/Makefile: $(ALL_GCC_C)
+configure-target-libf2c: $(ALL_GCC_C)
all-target-libf2c: maybe-all-target-libiberty
-$(TARGET_SUBDIR)/libffi/Makefile: $(ALL_GCC_C)
-$(TARGET_SUBDIR)/libjava/Makefile: $(ALL_GCC_C) maybe-configure-target-zlib maybe-configure-target-boehm-gc maybe-configure-target-qthreads maybe-configure-target-libffi
+configure-target-libffi: $(ALL_GCC_C)
+configure-target-libjava: $(ALL_GCC_C) maybe-configure-target-zlib maybe-configure-target-boehm-gc maybe-configure-target-qthreads maybe-configure-target-libffi
all-target-libjava: maybe-all-fastjar maybe-all-target-zlib maybe-all-target-boehm-gc maybe-all-target-qthreads maybe-all-target-libffi
-$(TARGET_SUBDIR)/libobjc/Makefile: $(ALL_GCC_C)
+configure-target-libobjc: $(ALL_GCC_C)
all-target-libobjc: maybe-all-target-libiberty
-$(TARGET_SUBDIR)/libstdc++-v3/Makefile: $(ALL_GCC_C)
+configure-target-libstdc++-v3: $(ALL_GCC_C)
all-target-libstdc++-v3: maybe-all-target-libiberty
-$(TARGET_SUBDIR)/zlib/Makefile: $(ALL_GCC_C)
+configure-target-zlib: $(ALL_GCC_C)
# Target modules in the 'src' repository.
-$(TARGET_SUBDIR)/examples/Makefile: $(ALL_GCC_C)
-$(TARGET_SUBDIR)/libgloss/Makefile: $(ALL_GCC)
+configure-target-examples: $(ALL_GCC_C)
+configure-target-libgloss: $(ALL_GCC)
all-target-libgloss: maybe-configure-target-newlib
-$(TARGET_SUBDIR)/libiberty/Makefile: $(ALL_GCC_C)
-$(TARGET_SUBDIR)/libtermcap/Makefile: $(ALL_GCC_C)
-$(TARGET_SUBDIR)/newlib/Makefile: $(ALL_GCC)
-$(TARGET_SUBDIR)/winsup/Makefile: $(ALL_GCC_C)
+configure-target-libiberty: $(ALL_GCC_C)
+configure-target-libtermcap: $(ALL_GCC_C)
+configure-target-newlib: $(ALL_GCC)
+configure-target-rda: $(ALL_GCC_C)
+configure-target-winsup: $(ALL_GCC_C)
all-target-winsup: maybe-all-target-libiberty maybe-all-target-libtermcap
# Other target modules. Warning, these are not well tested.
-$(TARGET_SUBDIR)/gperf/Makefile: $(ALL_GCC_CXX)
+configure-target-gperf: $(ALL_GCC_CXX)
all-target-gperf: maybe-all-target-libiberty maybe-all-target-libstdc++-v3
-$(TARGET_SUBDIR)/qthreads/Makefile: $(ALL_GCC_C)
+configure-target-qthreads: $(ALL_GCC_C)
# Dependencies of maybe-foo on foo. These are used because, for example,
# all-gcc only depends on all-gas if gas is present and being configured.
@maybe_dependencies@
+# Serialization dependencies. Host configures don't work well in parallel to
+# each other, due to contention over config.cache. Target configures and
+# build configures are similar.
+@serialization_dependencies@
+
# --------------------------------
# Regenerating top level configury
# --------------------------------
+# Multilib.out tells target dirs what multilibs they should build.
+# There is really only one copy. We use the 'timestamp' method to
+# work around various timestamp bugs on some systems.
+# We use move-if-change so that it's only considered updated when it
+# actually changes, because it has to depend on a phony target.
+multilib.out: maybe-all-gcc
+ @r=`${PWD}`; export r; \
+ echo "Checking multilib configuration..."; \
+ $(CC_FOR_TARGET) --print-multi-lib > multilib.tmp 2> /dev/null ; \
+ $(SHELL) $(srcdir)/move-if-change multilib.tmp multilib.out ; \
+
# Rebuilding Makefile.in, using autogen.
+AUTOGEN = autogen
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.tpl $(srcdir)/Makefile.def
- cd $(srcdir) && autogen Makefile.def
+ cd $(srcdir) && $(AUTOGEN) Makefile.def
-# with the gnu make, this is done automatically.
+# Rebuilding Makefile.
+Makefile: $(srcdir)/Makefile.in config.status
+ CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-host_makefile_frag=@host_makefile_frag@
-target_makefile_frag=@target_makefile_frag@
-
-Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag) $(gcc_version_trigger)
- $(SHELL) ./config.status
+config.status: configure $(gcc_version_trigger)
+ $(SHELL) ./config.status --recheck
+# Rebuilding configure.
+AUTOCONF = autoconf
+$(srcdir)/configure: $(srcdir)/configure.in $(srcdir)/config/acx.m4
+ cd $(srcdir) && $(AUTOCONF)
#
.NOEXPORT:
MAKEOVERRIDES=
+# Tell GNU make 3.79 not to run the top level in parallel. This
+# prevents contention for $builddir/$target/config.cache, as well
+# as minimizing scatter in file system caches.
+NOTPARALLEL = .NOTPARALLEL
+$(NOTPARALLEL):
+
# end of Makefile.in
projects / deliverable / binutils-gdb.git / blobdiff