# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
-# Tell GNU make 3.79 not to run the top level in parallel. This
-# prevents contention for $builddir/$target/config.cache, as well
-# as minimizing scatter in file system caches.
-NOTPARALLEL = .NOTPARALLEL
-$(NOTPARALLEL):
-
VPATH=@srcdir@
links=@configlinks@
oldincludedir = @oldincludedir@
infodir = @infodir@
mandir = @mandir@
-gxx_include_dir=@gxx_include_dir@
+gxx_include_dir = @gxx_include_dir@
+libstdcxx_incdir = @libstdcxx_incdir@
tooldir = @tooldir@
build_tooldir = @build_tooldir@
AS = @AS@
AR = @AR@
AR_FLAGS = rc
-CC = cc
+CC = @CC@
# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
# here so that they can be overridden by Makefile fragments.
BUILD_PREFIX = @BUILD_PREFIX@
BUILD_PREFIX_1 = @BUILD_PREFIX_1@
-# These flag values are normally overridden by the configure script.
-CFLAGS = -g
-CXXFLAGS = -g -O2
+CFLAGS = @CFLAGS@
+CXXFLAGS = @CXXFLAGS@
LDFLAGS =
LIBCFLAGS = $(CFLAGS)
PICFLAG =
PICFLAG_FOR_TARGET =
-CXX = c++
+CXX = @CXX@
# Use -O2 to stress test the compiler.
LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
BUILD_CONFIGDIRS = libiberty
BUILD_SUBDIR = @build_subdir@
-# This is set by the configure script to the arguments to use when configuring
-# directories built for the target.
-TARGET_CONFIGARGS = @target_configargs@
-
# This is set by the configure script to the arguments to use when configuring
# directories built for the build system.
BUILD_CONFIGARGS = @build_configargs@
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the host system.
+HOST_CONFIGARGS = @host_configargs@
+
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the target.
+TARGET_CONFIGARGS = @target_configargs@
+
# This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
# was used.
SET_LIB_PATH = @SET_LIB_PATH@
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(AS); \
else \
- t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
+ echo as | sed '$(program_transform_name)' ; \
fi; \
fi`
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(LD); \
else \
- t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
+ echo ld | sed '$(program_transform_name)' ; \
fi; \
fi`
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(DLLTOOL); \
else \
- t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
+ echo dlltool | sed '$(program_transform_name)' ; \
fi; \
fi`
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(WINDRES); \
else \
- t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \
+ echo windres | sed '$(program_transform_name)' ; \
fi; \
fi`
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(AR); \
else \
- t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
+ echo ar | sed '$(program_transform_name)' ; \
fi; \
fi`
echo ranlib; \
fi; \
else \
- t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
+ echo ranlib | sed '$(program_transform_name)' ; \
fi; \
fi`
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(NM); \
else \
- t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
+ echo nm | sed '$(program_transform_name)' ; \
fi; \
fi`
.PHONY: all
#### host and target specific makefile fragments come in here.
+@target_makefile_frag@
+@alphaieee_frag@
+@ospace_frag@
+@host_makefile_frag@
###
# Flags to pass down to all sub-makes.
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
-# This is a list of the configure targets for all of the modules which
-# are compiled using the target tools.
-CONFIGURE_TARGET_MODULES =[+
- FOR target_modules +] \
- configure-target-[+module+][+
- ENDFOR target_modules +]
-
-configure-target: $(CONFIGURE_TARGET_MODULES)
+configure-host: @configure_host_modules@
+configure-target: @configure_target_modules@
# This is a list of the targets for which we can do a clean-{target}.
CLEAN_MODULES =[+
@all_host_modules@ \
@all_target_modules@
+all-host: @all_host_modules@
all-target: @all_target_modules@
# Do a target for all the subdirectories. A ``make do-X'' will do a
done; \
;; \
esac ; \
- if (cd ./$$i; \
+ (cd ./$$i && \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- [+target+]); \
- then true; else exit 1; fi; \
+ [+target+]) \
+ || exit 1; \
else true; fi; \
done
# Break into two pieces
for flag in $(EXTRA_TARGET_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
- if (cd $(TARGET_SUBDIR)/$$i; \
+ (cd $(TARGET_SUBDIR)/$$i && \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- [+target+]); \
- then true; else exit 1; fi; \
+ [+target+]) \
+ || exit 1; \
else true; fi; \
done
[+ ENDFOR recursive_targets +]
installcheck: do-installcheck
dvi: do-dvi
-# Make sure makeinfo is built before we do a `make info'.
-do-info: all-texinfo
+# Make sure makeinfo is built before we do a `make info', if we're
+# in fact building texinfo.
+do-info: maybe-all-texinfo
install-info: do-install-info dir.info
s=`cd $(srcdir); ${PWD}`; export s; \
local-distclean:
-rm -f Makefile config.status config.cache mh-frag mt-frag
+ -rm -f multilib.out multilib.tmp maybedep.tmp serdep.tmp
-if [ "$(TARGET_SUBDIR)" != "." ]; then \
rm -rf $(TARGET_SUBDIR); \
else true; fi
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \
+ (cd $${dir} && $(MAKE) $(FLAGS_TO_PASS) clean); \
else \
true; \
fi
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) clean); \
+ (cd $(TARGET_SUBDIR)/$${dir} && $(MAKE) $(TARGET_FLAGS_TO_PASS) clean); \
else \
true; \
fi
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD}` ; export r ; \
$(SET_LIB_PATH) \
- (cd ./gcc; \
+ (cd ./gcc && \
$(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
else \
true ; \
install-no-fixedincludes: installdirs @install_host_modules_nogcc@ \
@install_target_modules@ gcc-no-fixedincludes
-# Install the gcc headers files, but not the fixed include files,
-# which Cygnus is not allowed to distribute. This rule is very
-# dependent on the workings of the gcc Makefile.in.
-.PHONY: gcc-no-fixedincludes
-gcc-no-fixedincludes:
- @if [ -f ./gcc/Makefile ]; then \
- rm -rf gcc/tmp-include; \
- mv gcc/include gcc/tmp-include 2>/dev/null; \
- mkdir gcc/include; \
- cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
- touch gcc/stmp-fixinc gcc/include/fixed; \
- rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
- r=`${PWD}`; export r; \
- s=`cd $(srcdir); ${PWD}` ; export s; \
- $(SET_LIB_PATH) \
- (cd ./gcc; \
- $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
- rm -rf gcc/include; \
- mv gcc/tmp-include gcc/include 2>/dev/null; \
- else true; fi
+### other supporting targets
-# These rules are used to build the modules which are built with the
-# build machine's native compiler.
-[+ FOR build_modules +]
-.PHONY: all-build-[+module+] maybe-all-build-[+module+]
-maybe-all-build-[+module+]:
-all-build-[+module+]:
- @if [ -f ./[+module+]/Makefile ] ; then \
- r=`${PWD}`; export r; \
- s=`cd $(srcdir); ${PWD}`; export s; \
- (cd $(BUILD_SUBDIR)/[+module+] && $(MAKE) all); \
- else \
- true; \
+MAKEDIRS= \
+ $(DESTDIR)$(prefix) \
+ $(DESTDIR)$(exec_prefix)
+.PHONY: installdirs
+installdirs: mkinstalldirs
+ $(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
+
+dir.info: do-install-info
+ if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
+ $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
+ mv -f dir.info.new dir.info ; \
+ else true ; \
fi
+dist:
+ @echo "Building a full distribution of this tree isn't done"
+ @echo "via 'make dist'. Check out the etc/ subdirectory"
+
+etags tags: TAGS
+
+# Right now this just builds TAGS in each subdirectory. emacs19 has the
+# ability to use several tags files at once, so there is probably no need
+# to combine them into one big TAGS file (like CVS 1.3 does). We could
+# (if we felt like it) have this Makefile write a piece of elisp which
+# the user could load to tell emacs19 where all the TAGS files we just
+# built are.
+TAGS: do-TAGS
+
+# --------------------------------------
+# Modules which run on the build machine
+# --------------------------------------
+[+ FOR build_modules +]
.PHONY: configure-build-[+module+] maybe-configure-build-[+module+]
maybe-configure-build-[+module+]:
configure-build-[+module+]:
- @if [ ! -d $(BUILD_SUBDIR) ]; then \
- true; \
- elif [ -f $(BUILD_SUBDIR)/[+module+]/Makefile ] ; then \
- true; \
- elif echo " $(BUILD_CONFIGDIRS) " | grep " [+module+] " >/dev/null 2>&1; then \
- if [ -d $(srcdir)/[+module+] ]; then \
- [ -d $(BUILD_SUBDIR)/[+module+] ] || mkdir $(BUILD_SUBDIR)/[+module+];\
+ @test ! -f $(BUILD_SUBDIR)/[+module+]/Makefile || exit 0; \
+ [ -d $(BUILD_SUBDIR)/[+module+] ] || \
+ mkdir $(BUILD_SUBDIR)/[+module+];\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
AR="$(AR_FOR_BUILD)"; export AR; \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(BUILD_CONFIGARGS) $${srcdiroption} \
--with-build-subdir="$(BUILD_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi; \
- else \
- true; \
- fi
+ || exit 1
+
+.PHONY: all-build-[+module+] maybe-all-build-[+module+]
+maybe-all-build-[+module+]:
+all-build-[+module+]: configure-build-[+module+]
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ (cd $(BUILD_SUBDIR)/[+module+] && $(MAKE) all)
[+ ENDFOR build_modules +]
-# These rules are used to build the modules which use FLAGS_TO_PASS. To
-# build a target all-X means to cd to X and make all.
+# --------------------------------------
+# Modules which run on the host machine
+# --------------------------------------
[+ FOR host_modules +]
+.PHONY: configure-[+module+] maybe-configure-[+module+]
+maybe-configure-[+module+]:
+configure-[+module+]:
+ @test ! -f [+module+]/Makefile || exit 0; \
+ [ -d [+module+] ] || mkdir [+module+]; \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ CC="$(CC)"; export CC; \
+ CFLAGS="$(CFLAGS)"; export CFLAGS; \
+ CXX="$(CXX)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
+ if [ z$(build_canonical) != z$(host_canoncial) ] ; then \
+ AR="$(AR)"; export AR; \
+ AS="$(AS)"; export AS; \
+ CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
+ DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
+ LD="$(LD)"; export LD; \
+ NM="$(NM)"; export NM; \
+ RANLIB="$(RANLIB)"; export RANLIB; \
+ WINDRES="$(WINDRES)"; export WINDRES; \
+ OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
+ OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
+ fi; \
+ echo Configuring in [+module+]; \
+ cd [+module+] || exit 1; \
+ case $(srcdir) in \
+ \.) \
+ srcdiroption="--srcdir=."; \
+ libsrcdir=".";; \
+ /* | [A-Za-z]:[\\/]*) \
+ srcdiroption="--srcdir=$(srcdir)/[+module+]"; \
+ libsrcdir="$$s/[+module+]";; \
+ *) \
+ srcdiroption="--srcdir=../$(srcdir)/[+module+]"; \
+ libsrcdir="$$s/[+module+]";; \
+ esac; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ || exit 1
+
.PHONY: all-[+module+] maybe-all-[+module+]
maybe-all-[+module+]:
-all-[+module+]:
+all-[+module+]: configure-[+module+]
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd [+module+]; $(MAKE) $(FLAGS_TO_PASS)[+
+ (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
IF with_x
+] $(X11_FLAGS_TO_PASS)[+
ENDIF with_x +] all)
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd [+module+]; $(MAKE) $(FLAGS_TO_PASS)[+
+ (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
IF with_x
+] $(X11_FLAGS_TO_PASS)[+
ENDIF with_x +] check); \
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd [+module+]; $(MAKE) $(FLAGS_TO_PASS)[+
+ (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
IF with_x
+] $(X11_FLAGS_TO_PASS)[+
ENDIF with_x +] check)
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd [+module+]; $(MAKE) $(FLAGS_TO_PASS)[+
+ (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
IF with_x
+] $(X11_FLAGS_TO_PASS)[+
ENDIF with_x +] install)
[+ ENDIF no_install +]
[+ ENDFOR host_modules +]
-# These rules are used to build the modules which are built with the target
-# tools. To make foo-X means to cd to X and make foo.
+# ---------------------------------------
+# Modules which run on the target machine
+# ---------------------------------------
[+ FOR target_modules +]
.PHONY: configure-target-[+module+] maybe-configure-target-[+module+]
maybe-configure-target-[+module+]:
-configure-target-[+module+]:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/[+module+]/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/[+module+]/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/[+module+]/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/[+module+]/multilib.out $(TARGET_SUBDIR)/[+module+]/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/[+module+]/tmpmulti.out; \
- else \
- echo "Multilibs changed for [+module+], reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/[+module+]/multilib.out $(TARGET_SUBDIR)/[+module+]/Makefile; \
- mv $(TARGET_SUBDIR)/[+module+]/tmpmulti.out $(TARGET_SUBDIR)/[+module+]/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/[+module+]/tmpmulti.out $(TARGET_SUBDIR)/[+module+]/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/[+module+] ]; then \
- [ -d $(TARGET_SUBDIR)/[+module+] ] || mkdir $(TARGET_SUBDIR)/[+module+];\
+
+# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
+$(TARGET_SUBDIR)/[+module+]/multilib.out: multilib.out
+ @[ -d $(TARGET_SUBDIR)/[+module+] ] || \
+ mkdir $(TARGET_SUBDIR)/[+module+]; \
+ rm -f $(TARGET_SUBDIR)/[+module+]/Makefile || : ; \
+ cp multilib.out $(TARGET_SUBDIR)/[+module+]/multilib.out
+
+configure-target-[+module+]: $(TARGET_SUBDIR)/[+module+]/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/[+module+]/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/[+module+] ] || \
+ mkdir $(TARGET_SUBDIR)/[+module+];\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-[+module+] maybe-all-target-[+module+]
maybe-all-target-[+module+]:
-all-target-[+module+]:
+all-target-[+module+]: configure-target-[+module+]
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/[+module+]; \
+ (cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) [+
IF raw_cxx
+] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/[+module+]; \
+ (cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) [+
IF raw_cxx
+] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/[+module+]; \
+ (cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) install)
[+ ENDIF no_install +]
[+ ENDFOR target_modules +]
+# ----------
+# GCC module
+# ----------
+
+# Unfortunately, while gcc _should_ be a host module,
+# libgcc is a target module, and gen* programs are
+# build modules. So GCC is a sort of hybrid.
+
# gcc is the only module which uses GCC_FLAGS_TO_PASS.
+.PHONY: configure-gcc maybe-configure-gcc
+maybe-configure-gcc:
+configure-gcc:
+ @test ! -f gcc/Makefile || exit 0; \
+ [ -d gcc ] || mkdir gcc; \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ CC="$(CC)"; export CC; \
+ CFLAGS="$(CFLAGS)"; export CFLAGS; \
+ CXX="$(CXX)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
+ if [ z$(build_canonical) != z$(host_canoncial) ] ; then \
+ AR="$(AR)"; export AR; \
+ AS="$(AS)"; export AS; \
+ CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
+ DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
+ LD="$(LD)"; export LD; \
+ NM="$(NM)"; export NM; \
+ RANLIB="$(RANLIB)"; export RANLIB; \
+ WINDRES="$(WINDRES)"; export WINDRES; \
+ OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
+ OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
+ fi; \
+ echo Configuring in gcc; \
+ cd gcc || exit 1; \
+ case $(srcdir) in \
+ \.) \
+ srcdiroption="--srcdir=."; \
+ libsrcdir=".";; \
+ /* | [A-Za-z]:[\\/]*) \
+ srcdiroption="--srcdir=$(srcdir)/gcc"; \
+ libsrcdir="$$s/gcc";; \
+ *) \
+ srcdiroption="--srcdir=../$(srcdir)/gcc"; \
+ libsrcdir="$$s/gcc";; \
+ esac; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ || exit 1
+
+# Don't 'make all' in gcc if it's already been made by 'bootstrap'; that
+# causes trouble. This wart will be fixed eventually by moving
+# the bootstrap behavior to this file.
.PHONY: all-gcc maybe-all-gcc
maybe-all-gcc:
-all-gcc:
- @if [ -f ./gcc/Makefile ] ; then \
+all-gcc: configure-gcc
+ @if [ -f gcc/stage_last ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
+ (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) quickstrap); \
else \
- true; \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
fi
# Building GCC uses some tools for rebuilding "source" files
# in parallel.
#
.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap
-bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap: all-bootstrap
+bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap: all-bootstrap configure-gcc
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
+ (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
else \
true; \
fi
-.PHONY: check-c++
-check-c++:
+.PHONY: check-gcc-c++
+check-gcc-c++:
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
- $(MAKE) check-target-libstdc++-v3; \
+ (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
else \
true; \
- fi
+ fi
+
+.PHONY: check-c++
+check-c++: check-target-libstdc++-v3 check-gcc-c++
.PHONY: install-gcc maybe-install-gcc
maybe-install-gcc:
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
else \
true; \
fi
+# Install the gcc headers files, but not the fixed include files,
+# which Cygnus is not allowed to distribute. This rule is very
+# dependent on the workings of the gcc Makefile.in.
+.PHONY: gcc-no-fixedincludes
+gcc-no-fixedincludes:
+ @if [ -f ./gcc/Makefile ]; then \
+ rm -rf gcc/tmp-include; \
+ mv gcc/include gcc/tmp-include 2>/dev/null; \
+ mkdir gcc/include; \
+ cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
+ touch gcc/stmp-fixinc gcc/include/fixed; \
+ rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}` ; export s; \
+ $(SET_LIB_PATH) \
+ (cd ./gcc && \
+ $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ rm -rf gcc/include; \
+ mv gcc/tmp-include gcc/include 2>/dev/null; \
+ else true; fi
+
# --------------------------------------
# Dependencies between different modules
# --------------------------------------
# it's safer to use a soft dependency.
# Host modules specific to gcc.
+# GCC needs to identify certain tools.
+configure-gcc: maybe-configure-binutils maybe-configure-gas maybe-configure-ld maybe-configure-bison maybe-configure-flex
all-gcc: maybe-all-libiberty maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib
# This is a slightly kludgy method of getting dependencies on
# all-build-libiberty correct; it would be better to build it every time.
all-bootstrap: maybe-all-libiberty maybe-all-texinfo maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib
# Host modules specific to gdb.
+# GDB needs to know that the simulator is being built.
+configure-gdb: maybe-configure-tcl maybe-configure-tk maybe-configure-sim
GDB_TK = @GDB_TK@
all-gdb: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-mmalloc maybe-all-readline maybe-all-bison maybe-all-byacc maybe-all-sim $(gdbnlmrequirements) $(GDB_TK)
install-gdb: maybe-install-tcl maybe-install-tk maybe-install-itcl maybe-install-tix maybe-install-libgui
+configure-libgui: maybe-configure-tcl maybe-configure-tk
all-libgui: maybe-all-tcl maybe-all-tk maybe-all-itcl
# Host modules specific to binutils.
+configure-bfd: configure-libiberty
all-bfd: maybe-all-libiberty maybe-all-intl
all-binutils: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-flex maybe-all-bison maybe-all-byacc maybe-all-intl
# We put install-opcodes before install-binutils because the installed
# Other host modules in the 'src' repository.
all-dejagnu: maybe-all-tcl maybe-all-expect maybe-all-tk
+configure-expect: maybe-configure-tcl maybe-configure-tk
all-expect: maybe-all-tcl maybe-all-tk
+configure-itcl: maybe-configure-tcl maybe-configure-tk
all-itcl: maybe-all-tcl maybe-all-tk
# We put install-tcl before install-itcl because itcl wants to run a
# program on installation which uses the Tcl libraries.
install-itcl: maybe-install-tcl
all-sid: maybe-all-tcl maybe-all-tk
install-sid: maybe-install-tcl maybe-install-tk
-all-sim: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-readline
+all-sim: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-readline maybe-configure-gdb
+configure-tk: maybe-configure-tcl
all-tk: maybe-all-tcl
+configure-tix: maybe-configure-tcl maybe-configure-tk
all-tix: maybe-all-tcl maybe-all-tk
all-texinfo: maybe-all-libiberty
all-send-pr: maybe-all-prms
all-snavigator: maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-db maybe-all-grep maybe-all-libgui
all-tar: maybe-all-libiberty
-all-tclX: maybe-all-tcl maybe-all-tk
all-uudecode: maybe-all-libiberty
ALL_GCC = maybe-all-gcc
configure-target-libiberty: $(ALL_GCC_C)
configure-target-libtermcap: $(ALL_GCC_C)
configure-target-newlib: $(ALL_GCC)
+configure-target-rda: $(ALL_GCC_C)
configure-target-winsup: $(ALL_GCC_C)
all-target-winsup: maybe-all-target-libiberty maybe-all-target-libtermcap
all-target-gperf: maybe-all-target-libiberty maybe-all-target-libstdc++-v3
configure-target-qthreads: $(ALL_GCC_C)
-# Dependencies of all-build-foo on configure-build-foo.
-[+ FOR build_modules +]all-build-[+module+]: configure-build-[+module+]
-[+ ENDFOR build_modules +]
-
-# Dependencies of all-target-foo on configure-target-foo.
-[+ FOR target_modules +]all-target-[+module+]: configure-target-[+module+]
-[+ ENDFOR target_modules +]
-
# Dependencies of maybe-foo on foo. These are used because, for example,
# all-gcc only depends on all-gas if gas is present and being configured.
@maybe_dependencies@
-### other supporting targets
-
-MAKEDIRS= \
- $(DESTDIR)$(prefix) \
- $(DESTDIR)$(exec_prefix)
-.PHONY: installdirs
-installdirs: mkinstalldirs
- $(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
-
-dir.info: do-install-info
- if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
- $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
- mv -f dir.info.new dir.info ; \
- else true ; \
- fi
-
-dist:
- @echo "Building a full distribution of this tree isn't done"
- @echo "via 'make dist'. Check out the etc/ subdirectory"
-
-etags tags: TAGS
-
-# Right now this just builds TAGS in each subdirectory. emacs19 has the
-# ability to use several tags files at once, so there is probably no need
-# to combine them into one big TAGS file (like CVS 1.3 does). We could
-# (if we felt like it) have this Makefile write a piece of elisp which
-# the user could load to tell emacs19 where all the TAGS files we just
-# built are.
-TAGS: do-TAGS
+# Serialization dependencies. Host configures don't work well in parallel to
+# each other, due to contention over config.cache. Target configures and
+# build configures are similar.
+@serialization_dependencies@
+
+# --------------------------------
+# Regenerating top level configury
+# --------------------------------
+
+# Multilib.out tells target dirs what multilibs they should build.
+# There is really only one copy. We use the 'timestamp' method to
+# work around various timestamp bugs on some systems.
+# We use move-if-change so that it's only considered updated when it
+# actually changes, because it has to depend on a phony target.
+multilib.out: maybe-all-gcc
+ @r=`${PWD}`; export r; \
+ echo "Checking multilib configuration..."; \
+ $(CC_FOR_TARGET) --print-multi-lib > multilib.tmp 2> /dev/null ; \
+ $(SHELL) $(srcdir)/move-if-change multilib.tmp multilib.out ; \
# Rebuilding Makefile.in, using autogen.
+AUTOGEN = autogen
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.tpl $(srcdir)/Makefile.def
- cd $(srcdir) && autogen Makefile.def
+ cd $(srcdir) && $(AUTOGEN) Makefile.def
-# with the gnu make, this is done automatically.
+# Rebuilding Makefile.
+Makefile: $(srcdir)/Makefile.in config.status
+ CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-host_makefile_frag=@host_makefile_frag@
-target_makefile_frag=@target_makefile_frag@
-
-Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag) $(gcc_version_trigger)
- $(SHELL) ./config.status
+config.status: configure $(gcc_version_trigger)
+ $(SHELL) ./config.status --recheck
+# Rebuilding configure.
+AUTOCONF = autoconf
+$(srcdir)/configure: $(srcdir)/configure.in $(srcdir)/config/acx.m4
+ cd $(srcdir) && $(AUTOCONF)
#
.NOEXPORT:
MAKEOVERRIDES=
+# Tell GNU make 3.79 not to run the top level in parallel. This
+# prevents contention for $builddir/$target/config.cache, as well
+# as minimizing scatter in file system caches.
+NOTPARALLEL = .NOTPARALLEL
+$(NOTPARALLEL):
+
# end of Makefile.in
projects / deliverable / binutils-gdb.git / blobdiff