/* actual number of DMA channels and slots on this silicon */
struct edma {
+ struct device *dev;
/* how many dma resources of each type */
unsigned num_channels;
unsigned num_region;
const s8 *noevent;
struct edma_soc_info *info;
+ int id;
/* The edma_inuse bit for each PaRAM slot is clear unless the
* channel is in use ... by ARM or DSP, for QDMA, or whatever.
*/
DECLARE_BITMAP(edma_unused, EDMA_MAX_DMACH);
- unsigned irq_res_start;
- unsigned irq_res_end;
-
struct dma_interrupt_data {
void (*callback)(unsigned channel, unsigned short ch_status,
void *data);
}
}
-static int irq2ctlr(int irq)
-{
- if (irq >= edma_cc[0]->irq_res_start && irq <= edma_cc[0]->irq_res_end)
- return 0;
- else if (irq >= edma_cc[1]->irq_res_start &&
- irq <= edma_cc[1]->irq_res_end)
- return 1;
-
- return -1;
-}
-
/******************************************************************************
*
* DMA interrupt handler
*****************************************************************************/
static irqreturn_t dma_irq_handler(int irq, void *data)
{
+ struct edma *cc = data;
int ctlr;
u32 sh_ier;
u32 sh_ipr;
u32 bank;
- ctlr = irq2ctlr(irq);
+ ctlr = cc->id;
if (ctlr < 0)
return IRQ_NONE;
- dev_dbg(data, "dma_irq_handler\n");
+ dev_dbg(cc->dev, "dma_irq_handler\n");
sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 0);
if (!sh_ipr) {
u32 slot;
u32 channel;
- dev_dbg(data, "IPR%d %08x\n", bank, sh_ipr);
+ dev_dbg(cc->dev, "IPR%d %08x\n", bank, sh_ipr);
slot = __ffs(sh_ipr);
sh_ipr &= ~(BIT(slot));
/* Clear the corresponding IPR bits */
edma_shadow0_write_array(ctlr, SH_ICR, bank,
BIT(slot));
- if (edma_cc[ctlr]->intr_data[channel].callback)
- edma_cc[ctlr]->intr_data[channel].callback(
- channel, EDMA_DMA_COMPLETE,
- edma_cc[ctlr]->intr_data[channel].data);
+ if (cc->intr_data[channel].callback)
+ cc->intr_data[channel].callback(
+ EDMA_CTLR_CHAN(ctlr, channel),
+ EDMA_DMA_COMPLETE,
+ cc->intr_data[channel].data);
}
} while (sh_ipr);
*****************************************************************************/
static irqreturn_t dma_ccerr_handler(int irq, void *data)
{
+ struct edma *cc = data;
int i;
int ctlr;
unsigned int cnt = 0;
- ctlr = irq2ctlr(irq);
+ ctlr = cc->id;
if (ctlr < 0)
return IRQ_NONE;
- dev_dbg(data, "dma_ccerr_handler\n");
+ dev_dbg(cc->dev, "dma_ccerr_handler\n");
if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
(edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
else if (edma_read_array(ctlr, EDMA_EMR, 1))
j = 1;
if (j >= 0) {
- dev_dbg(data, "EMR%d %08x\n", j,
- edma_read_array(ctlr, EDMA_EMR, j));
+ dev_dbg(cc->dev, "EMR%d %08x\n", j,
+ edma_read_array(ctlr, EDMA_EMR, j));
for (i = 0; i < 32; i++) {
int k = (j << 5) + i;
if (edma_read_array(ctlr, EDMA_EMR, j) &
/* Clear any SER */
edma_shadow0_write_array(ctlr, SH_SECR,
j, BIT(i));
- if (edma_cc[ctlr]->intr_data[k].
- callback) {
- edma_cc[ctlr]->intr_data[k].
- callback(k,
- EDMA_DMA_CC_ERROR,
- edma_cc[ctlr]->intr_data
- [k].data);
+ if (cc->intr_data[k].callback) {
+ cc->intr_data[k].callback(
+ EDMA_CTLR_CHAN(ctlr, k),
+ EDMA_DMA_CC_ERROR,
+ cc->intr_data[k].data);
}
}
}
} else if (edma_read(ctlr, EDMA_QEMR)) {
- dev_dbg(data, "QEMR %02x\n",
+ dev_dbg(cc->dev, "QEMR %02x\n",
edma_read(ctlr, EDMA_QEMR));
for (i = 0; i < 8; i++) {
if (edma_read(ctlr, EDMA_QEMR) & BIT(i)) {
}
}
} else if (edma_read(ctlr, EDMA_CCERR)) {
- dev_dbg(data, "CCERR %08x\n",
+ dev_dbg(cc->dev, "CCERR %08x\n",
edma_read(ctlr, EDMA_CCERR));
/* FIXME: CCERR.BIT(16) ignored! much better
* to just write CCERRCLR with CCERR value...
return IRQ_HANDLED;
}
-static int reserve_contiguous_slots(int ctlr, unsigned int id,
- unsigned int num_slots,
- unsigned int start_slot)
-{
- int i, j;
- unsigned int count = num_slots;
- int stop_slot = start_slot;
- DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY);
-
- for (i = start_slot; i < edma_cc[ctlr]->num_slots; ++i) {
- j = EDMA_CHAN_SLOT(i);
- if (!test_and_set_bit(j, edma_cc[ctlr]->edma_inuse)) {
- /* Record our current beginning slot */
- if (count == num_slots)
- stop_slot = i;
-
- count--;
- set_bit(j, tmp_inuse);
-
- if (count == 0)
- break;
- } else {
- clear_bit(j, tmp_inuse);
-
- if (id == EDMA_CONT_PARAMS_FIXED_EXACT) {
- stop_slot = i;
- break;
- } else {
- count = num_slots;
- }
- }
- }
-
- /*
- * We have to clear any bits that we set
- * if we run out parameter RAM slots, i.e we do find a set
- * of contiguous parameter RAM slots but do not find the exact number
- * requested as we may reach the total number of parameter RAM slots
- */
- if (i == edma_cc[ctlr]->num_slots)
- stop_slot = i;
-
- j = start_slot;
- for_each_set_bit_from(j, tmp_inuse, stop_slot)
- clear_bit(j, edma_cc[ctlr]->edma_inuse);
-
- if (count)
- return -EBUSY;
-
- for (j = i - num_slots + 1; j <= i; ++j)
- memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
- &dummy_paramset, PARM_SIZE);
-
- return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1);
-}
-
static int prepare_unused_channel_list(struct device *dev, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
}
EXPORT_SYMBOL(edma_free_slot);
-
-/**
- * edma_alloc_cont_slots- alloc contiguous parameter RAM slots
- * The API will return the starting point of a set of
- * contiguous parameter RAM slots that have been requested
- *
- * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
- * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- * @count: number of contiguous Paramter RAM slots
- * @slot - the start value of Parameter RAM slot that should be passed if id
- * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- *
- * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
- * contiguous Parameter RAM slots from parameter RAM 64 in the case of
- * DaVinci SOCs and 32 in the case of DA8xx SOCs.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
- * set of contiguous parameter RAM slots from the "slot" that is passed as an
- * argument to the API.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
- * starts looking for a set of contiguous parameter RAMs from the "slot"
- * that is passed as an argument to the API. On failure the API will try to
- * find a set of contiguous Parameter RAM slots from the remaining Parameter
- * RAM slots
- */
-int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
-{
- /*
- * The start slot requested should be greater than
- * the number of channels and lesser than the total number
- * of slots
- */
- if ((id != EDMA_CONT_PARAMS_ANY) &&
- (slot < edma_cc[ctlr]->num_channels ||
- slot >= edma_cc[ctlr]->num_slots))
- return -EINVAL;
-
- /*
- * The number of parameter RAM slots requested cannot be less than 1
- * and cannot be more than the number of slots minus the number of
- * channels
- */
- if (count < 1 || count >
- (edma_cc[ctlr]->num_slots - edma_cc[ctlr]->num_channels))
- return -EINVAL;
-
- switch (id) {
- case EDMA_CONT_PARAMS_ANY:
- return reserve_contiguous_slots(ctlr, id, count,
- edma_cc[ctlr]->num_channels);
- case EDMA_CONT_PARAMS_FIXED_EXACT:
- case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
- return reserve_contiguous_slots(ctlr, id, count, slot);
- default:
- return -EINVAL;
- }
-
-}
-EXPORT_SYMBOL(edma_alloc_cont_slots);
-
-/**
- * edma_free_cont_slots - deallocate DMA parameter RAM slots
- * @slot: first parameter RAM of a set of parameter RAM slots to be freed
- * @count: the number of contiguous parameter RAM slots to be freed
- *
- * This deallocates the parameter RAM slots allocated by
- * edma_alloc_cont_slots.
- * Callers/applications need to keep track of sets of contiguous
- * parameter RAM slots that have been allocated using the edma_alloc_cont_slots
- * API.
- * Callers are responsible for ensuring the slots are inactive, and will
- * not be activated.
- */
-int edma_free_cont_slots(unsigned slot, int count)
-{
- unsigned ctlr, slot_to_free;
- int i;
-
- ctlr = EDMA_CTLR(slot);
- slot = EDMA_CHAN_SLOT(slot);
-
- if (slot < edma_cc[ctlr]->num_channels ||
- slot >= edma_cc[ctlr]->num_slots ||
- count < 1)
- return -EINVAL;
-
- for (i = slot; i < slot + count; ++i) {
- ctlr = EDMA_CTLR(i);
- slot_to_free = EDMA_CHAN_SLOT(i);
-
- memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free),
- &dummy_paramset, PARM_SIZE);
- clear_bit(slot_to_free, edma_cc[ctlr]->edma_inuse);
- }
-
- return 0;
-}
-EXPORT_SYMBOL(edma_free_cont_slots);
-
/*-----------------------------------------------------------------------*/
/* Parameter RAM operations (i) -- read/write partial slots */
-/**
- * edma_set_src - set initial DMA source address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @src_port: physical address of source (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the source address is modified during the DMA transfer
- * according to edma_set_src_index().
- */
-void edma_set_src(unsigned slot, dma_addr_t src_port,
- enum address_mode mode, enum fifo_width width)
-{
- unsigned ctlr;
-
- ctlr = EDMA_CTLR(slot);
- slot = EDMA_CHAN_SLOT(slot);
-
- if (slot < edma_cc[ctlr]->num_slots) {
- unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
- if (mode) {
- /* set SAM and program FWID */
- i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
- } else {
- /* clear SAM */
- i &= ~SAM;
- }
- edma_parm_write(ctlr, PARM_OPT, slot, i);
-
- /* set the source port address
- in source register of param structure */
- edma_parm_write(ctlr, PARM_SRC, slot, src_port);
- }
-}
-EXPORT_SYMBOL(edma_set_src);
-
-/**
- * edma_set_dest - set initial DMA destination address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @dest_port: physical address of destination (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the destination address is modified during the DMA transfer
- * according to edma_set_dest_index().
- */
-void edma_set_dest(unsigned slot, dma_addr_t dest_port,
- enum address_mode mode, enum fifo_width width)
-{
- unsigned ctlr;
-
- ctlr = EDMA_CTLR(slot);
- slot = EDMA_CHAN_SLOT(slot);
-
- if (slot < edma_cc[ctlr]->num_slots) {
- unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
- if (mode) {
- /* set DAM and program FWID */
- i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
- } else {
- /* clear DAM */
- i &= ~DAM;
- }
- edma_parm_write(ctlr, PARM_OPT, slot, i);
- /* set the destination port address
- in dest register of param structure */
- edma_parm_write(ctlr, PARM_DST, slot, dest_port);
- }
-}
-EXPORT_SYMBOL(edma_set_dest);
-
/**
* edma_get_position - returns the current transfer point
* @slot: parameter RAM slot being examined
return edma_read(ctlr, offs);
}
-/**
- * edma_set_src_index - configure DMA source address indexing
- * @slot: parameter RAM slot being configured
- * @src_bidx: byte offset between source arrays in a frame
- * @src_cidx: byte offset between source frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
-{
- unsigned ctlr;
-
- ctlr = EDMA_CTLR(slot);
- slot = EDMA_CHAN_SLOT(slot);
-
- if (slot < edma_cc[ctlr]->num_slots) {
- edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
- 0xffff0000, src_bidx);
- edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
- 0xffff0000, src_cidx);
- }
-}
-EXPORT_SYMBOL(edma_set_src_index);
-
-/**
- * edma_set_dest_index - configure DMA destination address indexing
- * @slot: parameter RAM slot being configured
- * @dest_bidx: byte offset between destination arrays in a frame
- * @dest_cidx: byte offset between destination frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
-{
- unsigned ctlr;
-
- ctlr = EDMA_CTLR(slot);
- slot = EDMA_CHAN_SLOT(slot);
-
- if (slot < edma_cc[ctlr]->num_slots) {
- edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
- 0x0000ffff, dest_bidx << 16);
- edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
- 0x0000ffff, dest_cidx << 16);
- }
-}
-EXPORT_SYMBOL(edma_set_dest_index);
-
-/**
- * edma_set_transfer_params - configure DMA transfer parameters
- * @slot: parameter RAM slot being configured
- * @acnt: how many bytes per array (at least one)
- * @bcnt: how many arrays per frame (at least one)
- * @ccnt: how many frames per block (at least one)
- * @bcnt_rld: used only for A-Synchronized transfers; this specifies
- * the value to reload into bcnt when it decrements to zero
- * @sync_mode: ASYNC or ABSYNC
- *
- * See the EDMA3 documentation to understand how to configure and link
- * transfers using the fields in PaRAM slots. If you are not doing it
- * all at once with edma_write_slot(), you will use this routine
- * plus two calls each for source and destination, setting the initial
- * address and saying how to index that address.
- *
- * An example of an A-Synchronized transfer is a serial link using a
- * single word shift register. In that case, @acnt would be equal to
- * that word size; the serial controller issues a DMA synchronization
- * event to transfer each word, and memory access by the DMA transfer
- * controller will be word-at-a-time.
- *
- * An example of an AB-Synchronized transfer is a device using a FIFO.
- * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
- * The controller with the FIFO issues DMA synchronization events when
- * the FIFO threshold is reached, and the DMA transfer controller will
- * transfer one frame to (or from) the FIFO. It will probably use
- * efficient burst modes to access memory.
- */
-void edma_set_transfer_params(unsigned slot,
- u16 acnt, u16 bcnt, u16 ccnt,
- u16 bcnt_rld, enum sync_dimension sync_mode)
-{
- unsigned ctlr;
-
- ctlr = EDMA_CTLR(slot);
- slot = EDMA_CHAN_SLOT(slot);
-
- if (slot < edma_cc[ctlr]->num_slots) {
- edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot,
- 0x0000ffff, bcnt_rld << 16);
- if (sync_mode == ASYNC)
- edma_parm_and(ctlr, PARM_OPT, slot, ~SYNCDIM);
- else
- edma_parm_or(ctlr, PARM_OPT, slot, SYNCDIM);
- /* Set the acount, bcount, ccount registers */
- edma_parm_write(ctlr, PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
- edma_parm_write(ctlr, PARM_CCNT, slot, ccnt);
- }
-}
-EXPORT_SYMBOL(edma_set_transfer_params);
-
/**
* edma_link - link one parameter RAM slot to another
* @from: parameter RAM slot originating the link
}
EXPORT_SYMBOL(edma_link);
-/**
- * edma_unlink - cut link from one parameter RAM slot
- * @from: parameter RAM slot originating the link
- *
- * The originating slot should not be part of any active DMA transfer.
- * Its link is set to 0xffff.
- */
-void edma_unlink(unsigned from)
-{
- unsigned ctlr;
-
- ctlr = EDMA_CTLR(from);
- from = EDMA_CHAN_SLOT(from);
-
- if (from >= edma_cc[ctlr]->num_slots)
- return;
- edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff);
-}
-EXPORT_SYMBOL(edma_unlink);
-
/*-----------------------------------------------------------------------*/
/* Parameter RAM operations (ii) -- read/write whole parameter sets */
}
EXPORT_SYMBOL(edma_clean_channel);
-/*
- * edma_clear_event - clear an outstanding event on the DMA channel
- * Arguments:
- * channel - channel number
- */
-void edma_clear_event(unsigned channel)
-{
- unsigned ctlr;
-
- ctlr = EDMA_CTLR(channel);
- channel = EDMA_CHAN_SLOT(channel);
-
- if (channel >= edma_cc[ctlr]->num_channels)
- return;
- if (channel < 32)
- edma_write(ctlr, EDMA_ECR, BIT(channel));
- else
- edma_write(ctlr, EDMA_ECRH, BIT(channel - 32));
-}
-EXPORT_SYMBOL(edma_clear_event);
-
/*
* edma_assign_channel_eventq - move given channel to desired eventq
* Arguments:
static int edma_probe(struct platform_device *pdev)
{
- struct edma_soc_info **info = pdev->dev.platform_data;
- struct edma_soc_info *ninfo[EDMA_MAX_CC] = {NULL};
+ struct edma_soc_info *info = pdev->dev.platform_data;
s8 (*queue_priority_mapping)[2];
- int i, j, off, ln, found = 0;
- int status = -1;
+ int i, off, ln;
const s16 (*rsv_chans)[2];
const s16 (*rsv_slots)[2];
const s16 (*xbar_chans)[2];
- int irq[EDMA_MAX_CC] = {0, 0};
- int err_irq[EDMA_MAX_CC] = {0, 0};
- struct resource *r[EDMA_MAX_CC] = {NULL};
- struct resource res[EDMA_MAX_CC];
- char res_name[10];
+ int irq;
+ char *irq_name;
+ struct resource *mem;
struct device_node *node = pdev->dev.of_node;
struct device *dev = &pdev->dev;
+ int dev_id = pdev->id;
+ struct edma *cc;
int ret;
struct platform_device_info edma_dev_info = {
.name = "edma-dma-engine",
.parent = &pdev->dev,
};
+ /* When booting with DT the pdev->id is -1 */
+ if (dev_id < 0)
+ dev_id = arch_num_cc;
+
+ if (dev_id >= EDMA_MAX_CC) {
+ dev_err(dev,
+ "eDMA3 with device id 0 and 1 is supported (id: %d)\n",
+ dev_id);
+ return -EINVAL;
+ }
+
if (node) {
/* Check if this is a second instance registered */
if (arch_num_cc) {
return -ENODEV;
}
- ninfo[0] = edma_setup_info_from_dt(dev, node);
- if (IS_ERR(ninfo[0])) {
+ info = edma_setup_info_from_dt(dev, node);
+ if (IS_ERR(info)) {
dev_err(dev, "failed to get DT data\n");
- return PTR_ERR(ninfo[0]);
+ return PTR_ERR(info);
}
-
- info = ninfo;
}
if (!info)
return ret;
}
- for (j = 0; j < EDMA_MAX_CC; j++) {
- if (!info[j]) {
- if (!found)
- return -ENODEV;
- break;
- }
- if (node) {
- ret = of_address_to_resource(node, j, &res[j]);
- if (!ret)
- r[j] = &res[j];
- } else {
- sprintf(res_name, "edma_cc%d", j);
- r[j] = platform_get_resource_byname(pdev,
- IORESOURCE_MEM,
- res_name);
- }
- if (!r[j]) {
- if (found)
- break;
- else
- return -ENODEV;
- } else {
- found = 1;
+ mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma3_cc");
+ if (!mem) {
+ dev_dbg(dev, "mem resource not found, using index 0\n");
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(dev, "no mem resource?\n");
+ return -ENODEV;
}
+ }
- edmacc_regs_base[j] = devm_ioremap_resource(&pdev->dev, r[j]);
- if (IS_ERR(edmacc_regs_base[j]))
- return PTR_ERR(edmacc_regs_base[j]);
+ edmacc_regs_base[dev_id] = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(edmacc_regs_base[dev_id]))
+ return PTR_ERR(edmacc_regs_base[dev_id]);
- edma_cc[j] = devm_kzalloc(&pdev->dev, sizeof(struct edma),
- GFP_KERNEL);
- if (!edma_cc[j])
- return -ENOMEM;
+ edma_cc[dev_id] = devm_kzalloc(dev, sizeof(struct edma), GFP_KERNEL);
+ if (!edma_cc[dev_id])
+ return -ENOMEM;
- /* Get eDMA3 configuration from IP */
- ret = edma_setup_from_hw(dev, info[j], edma_cc[j], j);
- if (ret)
- return ret;
+ cc = edma_cc[dev_id];
+ cc->dev = dev;
+ cc->id = dev_id;
+ dev_set_drvdata(dev, cc);
- edma_cc[j]->default_queue = info[j]->default_queue;
+ /* Get eDMA3 configuration from IP */
+ ret = edma_setup_from_hw(dev, info, cc, dev_id);
+ if (ret)
+ return ret;
- dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
- edmacc_regs_base[j]);
+ cc->default_queue = info->default_queue;
- for (i = 0; i < edma_cc[j]->num_slots; i++)
- memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i),
- &dummy_paramset, PARM_SIZE);
+ dev_dbg(dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base[dev_id]);
- /* Mark all channels as unused */
- memset(edma_cc[j]->edma_unused, 0xff,
- sizeof(edma_cc[j]->edma_unused));
+ for (i = 0; i < cc->num_slots; i++)
+ memcpy_toio(edmacc_regs_base[dev_id] + PARM_OFFSET(i),
+ &dummy_paramset, PARM_SIZE);
- if (info[j]->rsv) {
+ /* Mark all channels as unused */
+ memset(cc->edma_unused, 0xff, sizeof(cc->edma_unused));
- /* Clear the reserved channels in unused list */
- rsv_chans = info[j]->rsv->rsv_chans;
- if (rsv_chans) {
- for (i = 0; rsv_chans[i][0] != -1; i++) {
- off = rsv_chans[i][0];
- ln = rsv_chans[i][1];
- clear_bits(off, ln,
- edma_cc[j]->edma_unused);
- }
- }
+ if (info->rsv) {
- /* Set the reserved slots in inuse list */
- rsv_slots = info[j]->rsv->rsv_slots;
- if (rsv_slots) {
- for (i = 0; rsv_slots[i][0] != -1; i++) {
- off = rsv_slots[i][0];
- ln = rsv_slots[i][1];
- set_bits(off, ln,
- edma_cc[j]->edma_inuse);
- }
+ /* Clear the reserved channels in unused list */
+ rsv_chans = info->rsv->rsv_chans;
+ if (rsv_chans) {
+ for (i = 0; rsv_chans[i][0] != -1; i++) {
+ off = rsv_chans[i][0];
+ ln = rsv_chans[i][1];
+ clear_bits(off, ln, cc->edma_unused);
}
}
- /* Clear the xbar mapped channels in unused list */
- xbar_chans = info[j]->xbar_chans;
- if (xbar_chans) {
- for (i = 0; xbar_chans[i][1] != -1; i++) {
- off = xbar_chans[i][1];
- clear_bits(off, 1,
- edma_cc[j]->edma_unused);
+ /* Set the reserved slots in inuse list */
+ rsv_slots = info->rsv->rsv_slots;
+ if (rsv_slots) {
+ for (i = 0; rsv_slots[i][0] != -1; i++) {
+ off = rsv_slots[i][0];
+ ln = rsv_slots[i][1];
+ set_bits(off, ln, cc->edma_inuse);
}
}
+ }
- if (node) {
- irq[j] = irq_of_parse_and_map(node, 0);
- err_irq[j] = irq_of_parse_and_map(node, 2);
- } else {
- char irq_name[10];
-
- sprintf(irq_name, "edma%d", j);
- irq[j] = platform_get_irq_byname(pdev, irq_name);
-
- sprintf(irq_name, "edma%d_err", j);
- err_irq[j] = platform_get_irq_byname(pdev, irq_name);
- }
- edma_cc[j]->irq_res_start = irq[j];
- edma_cc[j]->irq_res_end = err_irq[j];
-
- status = devm_request_irq(dev, irq[j], dma_irq_handler, 0,
- "edma", dev);
- if (status < 0) {
- dev_dbg(&pdev->dev,
- "devm_request_irq %d failed --> %d\n",
- irq[j], status);
- return status;
+ /* Clear the xbar mapped channels in unused list */
+ xbar_chans = info->xbar_chans;
+ if (xbar_chans) {
+ for (i = 0; xbar_chans[i][1] != -1; i++) {
+ off = xbar_chans[i][1];
+ clear_bits(off, 1, cc->edma_unused);
}
+ }
- status = devm_request_irq(dev, err_irq[j], dma_ccerr_handler, 0,
- "edma_error", dev);
- if (status < 0) {
- dev_dbg(&pdev->dev,
- "devm_request_irq %d failed --> %d\n",
- err_irq[j], status);
- return status;
+ irq = platform_get_irq_byname(pdev, "edma3_ccint");
+ if (irq < 0 && node)
+ irq = irq_of_parse_and_map(node, 0);
+
+ if (irq >= 0) {
+ irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccint",
+ dev_name(dev));
+ ret = devm_request_irq(dev, irq, dma_irq_handler, 0, irq_name,
+ cc);
+ if (ret) {
+ dev_err(dev, "CCINT (%d) failed --> %d\n", irq, ret);
+ return ret;
}
+ }
- for (i = 0; i < edma_cc[j]->num_channels; i++)
- map_dmach_queue(j, i, info[j]->default_queue);
+ irq = platform_get_irq_byname(pdev, "edma3_ccerrint");
+ if (irq < 0 && node)
+ irq = irq_of_parse_and_map(node, 2);
+
+ if (irq >= 0) {
+ irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccerrint",
+ dev_name(dev));
+ ret = devm_request_irq(dev, irq, dma_ccerr_handler, 0, irq_name,
+ cc);
+ if (ret) {
+ dev_err(dev, "CCERRINT (%d) failed --> %d\n", irq, ret);
+ return ret;
+ }
+ }
- queue_priority_mapping = info[j]->queue_priority_mapping;
+ for (i = 0; i < cc->num_channels; i++)
+ map_dmach_queue(dev_id, i, info->default_queue);
- /* Event queue priority mapping */
- for (i = 0; queue_priority_mapping[i][0] != -1; i++)
- assign_priority_to_queue(j,
- queue_priority_mapping[i][0],
- queue_priority_mapping[i][1]);
+ queue_priority_mapping = info->queue_priority_mapping;
- /* Map the channel to param entry if channel mapping logic
- * exist
- */
- if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
- map_dmach_param(j);
+ /* Event queue priority mapping */
+ for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+ assign_priority_to_queue(dev_id, queue_priority_mapping[i][0],
+ queue_priority_mapping[i][1]);
- for (i = 0; i < edma_cc[j]->num_region; i++) {
- edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
- edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
- edma_write_array(j, EDMA_QRAE, i, 0x0);
- }
- edma_cc[j]->info = info[j];
- arch_num_cc++;
+ /* Map the channel to param entry if channel mapping logic exist */
+ if (edma_read(dev_id, EDMA_CCCFG) & CHMAP_EXIST)
+ map_dmach_param(dev_id);
- edma_dev_info.id = j;
- platform_device_register_full(&edma_dev_info);
+ for (i = 0; i < cc->num_region; i++) {
+ edma_write_array2(dev_id, EDMA_DRAE, i, 0, 0x0);
+ edma_write_array2(dev_id, EDMA_DRAE, i, 1, 0x0);
+ edma_write_array(dev_id, EDMA_QRAE, i, 0x0);
}
+ cc->info = info;
+ arch_num_cc++;
+
+ edma_dev_info.id = dev_id;
+
+ platform_device_register_full(&edma_dev_info);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int edma_pm_resume(struct device *dev)
{
- int i, j;
+ struct edma *cc = dev_get_drvdata(dev);
+ int i;
+ s8 (*queue_priority_mapping)[2];
- for (j = 0; j < arch_num_cc; j++) {
- struct edma *cc = edma_cc[j];
+ queue_priority_mapping = cc->info->queue_priority_mapping;
- s8 (*queue_priority_mapping)[2];
+ /* Event queue priority mapping */
+ for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+ assign_priority_to_queue(cc->id, queue_priority_mapping[i][0],
+ queue_priority_mapping[i][1]);
- queue_priority_mapping = cc->info->queue_priority_mapping;
+ /* Map the channel to param entry if channel mapping logic */
+ if (edma_read(cc->id, EDMA_CCCFG) & CHMAP_EXIST)
+ map_dmach_param(cc->id);
- /* Event queue priority mapping */
- for (i = 0; queue_priority_mapping[i][0] != -1; i++)
- assign_priority_to_queue(j,
- queue_priority_mapping[i][0],
- queue_priority_mapping[i][1]);
+ for (i = 0; i < cc->num_channels; i++) {
+ if (test_bit(i, cc->edma_inuse)) {
+ /* ensure access through shadow region 0 */
+ edma_or_array2(cc->id, EDMA_DRAE, 0, i >> 5,
+ BIT(i & 0x1f));
- /*
- * Map the channel to param entry if channel mapping logic
- * exist
- */
- if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
- map_dmach_param(j);
-
- for (i = 0; i < cc->num_channels; i++) {
- if (test_bit(i, cc->edma_inuse)) {
- /* ensure access through shadow region 0 */
- edma_or_array2(j, EDMA_DRAE, 0, i >> 5,
- BIT(i & 0x1f));
-
- setup_dma_interrupt(i,
- cc->intr_data[i].callback,
- cc->intr_data[i].data);
- }
+ setup_dma_interrupt(EDMA_CTLR_CHAN(cc->id, i),
+ cc->intr_data[i].callback,
+ cc->intr_data[i].data);
}
}