* MA 02110-1301, USA.
*/
-#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/irq.h>
+#include <linux/platform_device.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/mmc.h>
-#include <mach/imxfb.h>
#include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
#include "devices.h"
-static int pcm970_sdhc2_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_PORTC + 28);
-}
-
-static int pcm970_sdhc2_pins[] = {
+static int pcm970_pins[] = {
+ /* SDHC */
PB4_PF_SD2_D0,
PB5_PF_SD2_D1,
PB6_PF_SD2_D2,
PB7_PF_SD2_D3,
PB8_PF_SD2_CMD,
PB9_PF_SD2_CLK,
+ GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
+ /* display */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA24_PF_REV,
+ PA25_PF_CLS,
+ PA26_PF_PS,
+ PA27_PF_SPL_SPR,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+ /*
+ * it seems the data line misses a pullup, so we must enable
+ * the internal pullup as a local workaround
+ */
+ PD17_PF_I2C_DATA | GPIO_PUEN,
+ PD18_PF_I2C_CLK,
+ /* Camera */
+ PB10_PF_CSI_D0,
+ PB11_PF_CSI_D1,
+ PB12_PF_CSI_D2,
+ PB13_PF_CSI_D3,
+ PB14_PF_CSI_D4,
+ PB15_PF_CSI_MCLK,
+ PB16_PF_CSI_PIXCLK,
+ PB17_PF_CSI_D5,
+ PB18_PF_CSI_D6,
+ PB19_PF_CSI_D7,
+ PB20_PF_CSI_VSYNC,
+ PB21_PF_CSI_HSYNC,
};
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_PORTC + 28);
+}
+
static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
{
int ret;
- ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
- ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
- if(ret)
- return ret;
-
- ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
+ ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
"imx-mmc-detect", data);
if (ret)
- goto out_release_gpio;
-
- set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
+ return ret;
ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
- if (ret)
- goto out_release_gpio;
+ if (ret) {
+ free_irq(IRQ_GPIOC(29), data);
+ return ret;
+ }
- mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
gpio_direction_input(GPIO_PORTC + 28);
return 0;
-
-out_release_gpio:
- mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
- ARRAY_SIZE(pcm970_sdhc2_pins));
- return ret;
}
static void pcm970_sdhc2_exit(struct device *dev, void *data)
{
free_irq(IRQ_GPIOC(29), data);
gpio_free(GPIO_PORTC + 28);
- mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
- ARRAY_SIZE(pcm970_sdhc2_pins));
}
static struct imxmmc_platform_data sdhc_pdata = {
.exit = pcm970_sdhc2_exit,
};
-static int mxc_fb_pins[] = {
- PA5_PF_LSCLK, PA6_PF_LD0, PA7_PF_LD1, PA8_PF_LD2,
- PA9_PF_LD3, PA10_PF_LD4, PA11_PF_LD5, PA12_PF_LD6,
- PA13_PF_LD7, PA14_PF_LD8, PA15_PF_LD9, PA16_PF_LD10,
- PA17_PF_LD11, PA18_PF_LD12, PA19_PF_LD13, PA20_PF_LD14,
- PA21_PF_LD15, PA22_PF_LD16, PA23_PF_LD17, PA24_PF_REV,
- PA25_PF_CLS, PA26_PF_PS, PA27_PF_SPL_SPR, PA28_PF_HSYNC,
- PA29_PF_VSYNC, PA30_PF_CONTRAST, PA31_PF_OE_ACD
+static struct imx_fb_videomode pcm970_modes[] = {
+ {
+ .mode = {
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 188679, /* in ps (5.3MHz) */
+ .hsync_len = 7,
+ .left_margin = 5,
+ .right_margin = 16,
+ .vsync_len = 1,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ },
+ /*
+ * - HSYNC active high
+ * - VSYNC active high
+ * - clk notenabled while idle
+ * - clock not inverted
+ * - data not inverted
+ * - data enable low active
+ * - enable sharp mode
+ */
+ .pcr = 0xF00080C0,
+ .bpp = 16,
+ }, {
+ .mode = {
+ .name = "TX090",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 7,
+ .lower_margin = 40,
+ .hsync_len = 96,
+ .vsync_len = 1,
+ },
+ /*
+ * - HSYNC active low (1 << 22)
+ * - VSYNC active low (1 << 23)
+ * - clk notenabled while idle
+ * - clock not inverted
+ * - data not inverted
+ * - data enable low active
+ * - enable sharp mode
+ */
+ .pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
+ .bpp = 32,
+ },
};
-static int pcm038_fb_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
- ARRAY_SIZE(mxc_fb_pins), "FB");
-}
-
-static void pcm038_fb_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
-}
-
-/*
- * Connected is a portrait Sharp-QVGA display
- * of type: LQ035Q7DH06
- */
static struct imx_fb_platform_data pcm038_fb_data = {
- .pixclock = 188679, /* in ps (5.3MHz) */
- .xres = 240,
- .yres = 320,
-
- .bpp = 16,
- .hsync_len = 7,
- .left_margin = 5,
- .right_margin = 16,
+ .mode = pcm970_modes,
+ .num_modes = ARRAY_SIZE(pcm970_modes),
- .vsync_len = 1,
- .upper_margin = 7,
- .lower_margin = 9,
- .fixed_screen_cpu = 0,
-
- /*
- * - HSYNC active high
- * - VSYNC active high
- * - clk notenabled while idle
- * - clock not inverted
- * - data not inverted
- * - data enable low active
- * - enable sharp mode
- */
- .pcr = 0xFA0080C0,
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
-
- .init = pcm038_fb_init,
- .exit = pcm038_fb_exit,
};
/*
*/
void __init pcm970_baseboard_init(void)
{
+ mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
+ "PCM970");
+
mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
}
projects / deliverable / linux.git / blobdiff