MIPS: Whitespace cleanup.

[deliverable/linux.git] / arch / mips / pci / fixup-cobalt.c

diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index 9553b14002dda51a757cf06ccb0bca5483b86c1a..a138e8ee5cfcf7bb8c2025202ea3e728c4240476 100644 (file)
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -94,14 +94,14 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev)
         * --x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--
         *
         * On all machines prior to Q2, we had the STOP line disconnected
-        * from Galileo to VIA on PCI.  The new Galileo does not function
+        * from Galileo to VIA on PCI.  The new Galileo does not function
         * correctly unless we have it connected.
         *
         * Therefore we must set the disconnect/retry cycle values to
         * something sensible when using the new Galileo.
         */
 
-       printk(KERN_INFO "Galileo: revision %u\n", dev->revision);
+       printk(KERN_INFO "Galileo: revision %u\n", dev->revision);
 
 #if 0
        if (dev->revision >= 0x10) {
@@ -149,30 +149,30 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0,
         qube_raq_via_board_id_fixup);
 
 static char irq_tab_qube1[] __initdata = {
-  [COBALT_PCICONF_CPU]     = 0,
-  [COBALT_PCICONF_ETH0]    = QUBE1_ETH0_IRQ,
+  [COBALT_PCICONF_CPU]    = 0,
+  [COBALT_PCICONF_ETH0]           = QUBE1_ETH0_IRQ,
   [COBALT_PCICONF_RAQSCSI] = SCSI_IRQ,
-  [COBALT_PCICONF_VIA]     = 0,
+  [COBALT_PCICONF_VIA]    = 0,
   [COBALT_PCICONF_PCISLOT] = PCISLOT_IRQ,
-  [COBALT_PCICONF_ETH1]    = 0
+  [COBALT_PCICONF_ETH1]           = 0
 };
 
 static char irq_tab_cobalt[] __initdata = {
-  [COBALT_PCICONF_CPU]     = 0,
-  [COBALT_PCICONF_ETH0]    = ETH0_IRQ,
+  [COBALT_PCICONF_CPU]    = 0,
+  [COBALT_PCICONF_ETH0]           = ETH0_IRQ,
   [COBALT_PCICONF_RAQSCSI] = SCSI_IRQ,
-  [COBALT_PCICONF_VIA]     = 0,
+  [COBALT_PCICONF_VIA]    = 0,
   [COBALT_PCICONF_PCISLOT] = PCISLOT_IRQ,
-  [COBALT_PCICONF_ETH1]    = ETH1_IRQ
+  [COBALT_PCICONF_ETH1]           = ETH1_IRQ
 };
 
 static char irq_tab_raq2[] __initdata = {
-  [COBALT_PCICONF_CPU]     = 0,
-  [COBALT_PCICONF_ETH0]    = ETH0_IRQ,
+  [COBALT_PCICONF_CPU]    = 0,
+  [COBALT_PCICONF_ETH0]           = ETH0_IRQ,
   [COBALT_PCICONF_RAQSCSI] = RAQ2_SCSI_IRQ,
-  [COBALT_PCICONF_VIA]     = 0,
+  [COBALT_PCICONF_VIA]    = 0,
   [COBALT_PCICONF_PCISLOT] = PCISLOT_IRQ,
-  [COBALT_PCICONF_ETH1]    = ETH1_IRQ
+  [COBALT_PCICONF_ETH1]           = ETH1_IRQ
 };
 
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)