generated from "bfd-in.h", "init.c", "opncls.c", "libbfd.c",
"bfdio.c", "bfdwin.c", "section.c", "archures.c", "reloc.c",
"syms.c", "bfd.c", "archive.c", "corefile.c", "targets.c", "format.c",
- "linker.c" and "simple.c".
+ "linker.c", "simple.c" and "compress.c".
Run "make headers" in your build bfd/ to regenerate. */
/* Main header file for the bfd library -- portable access to object files.
Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Free Software Foundation, Inc.
Contributed by Cygnus Support.
#define BFD_HOST_64BIT_LONG @BFD_HOST_64BIT_LONG@
#define BFD_HOST_64BIT_LONG_LONG @BFD_HOST_64BIT_LONG_LONG@
-#define BFD_HOST_LONG_LONG @BFD_HOST_LONG_LONG@
#if @BFD_HOST_64_BIT_DEFINED@
#define BFD_HOST_64_BIT @BFD_HOST_64_BIT@
#define BFD_HOST_U_64_BIT @BFD_HOST_U_64_BIT@
typedef BFD_HOST_U_64_BIT bfd_size_type;
typedef BFD_HOST_U_64_BIT symvalue;
-#ifndef fprintf_vma
#if BFD_HOST_64BIT_LONG
-#define sprintf_vma(s,x) sprintf (s, "%016lx", x)
-#define fprintf_vma(f,x) fprintf (f, "%016lx", x)
-#elif BFD_HOST_64BIT_LONG_LONG
-#define sprintf_vma(s,x) sprintf (s, "%016llx", x)
-#define fprintf_vma(f,x) fprintf (f, "%016llx", x)
+#define BFD_VMA_FMT "l"
+#elif defined (__MSVCRT__)
+#define BFD_VMA_FMT "I64"
#else
-#define _bfd_int64_low(x) ((unsigned long) (((x) & 0xffffffff)))
-#define _bfd_int64_high(x) ((unsigned long) (((x) >> 32) & 0xffffffff))
-#define fprintf_vma(s,x) \
- fprintf ((s), "%08lx%08lx", _bfd_int64_high (x), _bfd_int64_low (x))
-#define sprintf_vma(s,x) \
- sprintf ((s), "%08lx%08lx", _bfd_int64_high (x), _bfd_int64_low (x))
+#define BFD_VMA_FMT "ll"
#endif
+
+#ifndef fprintf_vma
+#define sprintf_vma(s,x) sprintf (s, "%016" BFD_VMA_FMT "x", x)
+#define fprintf_vma(f,x) fprintf (f, "%016" BFD_VMA_FMT "x", x)
#endif
#else /* not BFD64 */
typedef unsigned long bfd_size_type;
/* Print a bfd_vma x on stream s. */
-#define fprintf_vma(s,x) fprintf (s, "%08lx", x)
-#define sprintf_vma(s,x) sprintf (s, "%08lx", x)
+#define BFD_VMA_FMT "l"
+#define fprintf_vma(s,x) fprintf (s, "%08" BFD_VMA_FMT "x", x)
+#define sprintf_vma(s,x) sprintf (s, "%08" BFD_VMA_FMT "x", x)
#endif /* not BFD64 */
bfd_type_end /* Marks the end; don't use it! */
}
bfd_format;
-
-/* Values that may appear in the flags field of a BFD. These also
- appear in the object_flags field of the bfd_target structure, where
- they indicate the set of flags used by that backend (not all flags
- are meaningful for all object file formats) (FIXME: at the moment,
- the object_flags values have mostly just been copied from backend
- to another, and are not necessarily correct). */
-
-/* No flags. */
-#define BFD_NO_FLAGS 0x00
-
-/* BFD contains relocation entries. */
-#define HAS_RELOC 0x01
-
-/* BFD is directly executable. */
-#define EXEC_P 0x02
-
-/* BFD has line number information (basically used for F_LNNO in a
- COFF header). */
-#define HAS_LINENO 0x04
-
-/* BFD has debugging information. */
-#define HAS_DEBUG 0x08
-
-/* BFD has symbols. */
-#define HAS_SYMS 0x10
-
-/* BFD has local symbols (basically used for F_LSYMS in a COFF
- header). */
-#define HAS_LOCALS 0x20
-
-/* BFD is a dynamic object. */
-#define DYNAMIC 0x40
-
-/* Text section is write protected (if D_PAGED is not set, this is
- like an a.out NMAGIC file) (the linker sets this by default, but
- clears it for -r or -N). */
-#define WP_TEXT 0x80
-
-/* BFD is dynamically paged (this is like an a.out ZMAGIC file) (the
- linker sets this by default, but clears it for -r or -n or -N). */
-#define D_PAGED 0x100
-
-/* BFD is relaxable (this means that bfd_relax_section may be able to
- do something) (sometimes bfd_relax_section can do something even if
- this is not set). */
-#define BFD_IS_RELAXABLE 0x200
-
-/* This may be set before writing out a BFD to request using a
- traditional format. For example, this is used to request that when
- writing out an a.out object the symbols not be hashed to eliminate
- duplicates. */
-#define BFD_TRADITIONAL_FORMAT 0x400
-
-/* This flag indicates that the BFD contents are actually cached in
- memory. If this is set, iostream points to a bfd_in_memory struct. */
-#define BFD_IN_MEMORY 0x800
-
-/* The sections in this BFD specify a memory page. */
-#define HAS_LOAD_PAGE 0x1000
-
-/* This BFD has been created by the linker and doesn't correspond
- to any input file. */
-#define BFD_LINKER_CREATED 0x2000
\f
/* Symbols and relocation. */
#define bfd_asymbol_name(x) ((x)->name)
/*Perhaps future: #define bfd_asymbol_bfd(x) ((x)->section->owner)*/
#define bfd_asymbol_bfd(x) ((x)->the_bfd)
-#define bfd_asymbol_flavour(x) (bfd_asymbol_bfd(x)->xvec->flavour)
+#define bfd_asymbol_flavour(x) \
+ (((x)->flags & BSF_SYNTHETIC) != 0 \
+ ? bfd_target_unknown_flavour \
+ : bfd_asymbol_bfd (x)->xvec->flavour)
/* A canonical archive symbol. */
/* This is a type pun with struct ranlib on purpose! */
#define bfd_applicable_section_flags(abfd) ((abfd)->xvec->section_flags)
#define bfd_my_archive(abfd) ((abfd)->my_archive)
#define bfd_has_map(abfd) ((abfd)->has_armap)
+#define bfd_is_thin_archive(abfd) ((abfd)->is_thin_archive)
#define bfd_valid_reloc_types(abfd) ((abfd)->xvec->valid_reloc_types)
#define bfd_usrdata(abfd) ((abfd)->usrdata)
(bfd *, struct bfd_link_info *, struct bfd_section *, struct bfd_section *,
char **);
+extern void bfd_elf_m68k_set_target_options (struct bfd_link_info *, int);
+
extern bfd_boolean bfd_bfin_elf32_create_embedded_relocs
(bfd *, struct bfd_link_info *, struct bfd_section *, struct bfd_section *,
char **);
+extern bfd_boolean bfd_cr16_elf32_create_embedded_relocs
+ (bfd *, struct bfd_link_info *, struct bfd_section *, struct bfd_section *,
+ char **);
+
/* SunOS shared library support routines for the linker. */
extern struct bfd_link_needed_list *bfd_sunos_get_needed_list
/* XCOFF support routines for the linker. */
+extern bfd_boolean bfd_xcoff_split_import_path
+ (bfd *, const char *, const char **, const char **);
+extern bfd_boolean bfd_xcoff_set_archive_import_path
+ (struct bfd_link_info *, bfd *, const char *);
extern bfd_boolean bfd_xcoff_link_record_set
(bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *, bfd_size_type);
extern bfd_boolean bfd_xcoff_import_symbol
extern bfd_boolean bfd_xcoff_size_dynamic_sections
(bfd *, struct bfd_link_info *, const char *, const char *,
unsigned long, unsigned long, unsigned long, bfd_boolean,
- int, bfd_boolean, bfd_boolean, struct bfd_section **, bfd_boolean);
+ int, bfd_boolean, unsigned int, struct bfd_section **, bfd_boolean);
extern bfd_boolean bfd_xcoff_link_generate_rtinit
(bfd *, const char *, const char *, bfd_boolean);
void bfd_elf32_arm_set_target_relocs
(bfd *, struct bfd_link_info *, int, char *, int, int, bfd_arm_vfp11_fix,
- int, int);
+ int, int, int);
extern bfd_boolean bfd_elf32_arm_get_bfd_for_interworking
(bfd *, struct bfd_link_info *);
extern unsigned int bfd_arm_get_mach_from_notes
(bfd *, const char *);
+/* ARM stub generation support. Called from the linker. */
+extern int elf32_arm_setup_section_lists
+ (bfd *, struct bfd_link_info *);
+extern void elf32_arm_next_input_section
+ (struct bfd_link_info *, struct bfd_section *);
+extern bfd_boolean elf32_arm_size_stubs
+ (bfd *, bfd *, struct bfd_link_info *, bfd_signed_vma,
+ struct bfd_section * (*) (const char *, struct bfd_section *), void (*) (void));
+extern bfd_boolean elf32_arm_build_stubs
+ (struct bfd_link_info *);
+
/* TI COFF load page support. */
extern void bfd_ticoff_set_section_load_page
(struct bfd_section *, int);
/* If SEC_LINK_ONCE is set, this bitfield describes how the linker
should handle duplicate sections. */
-#define SEC_LINK_DUPLICATES 0x40000
+#define SEC_LINK_DUPLICATES 0xc0000
/* This value for SEC_LINK_DUPLICATES means that duplicate
sections with the same name should simply be discarded. */
/* This value for SEC_LINK_DUPLICATES means that the linker
should warn if there are any duplicate sections, although
it should still only link one copy. */
-#define SEC_LINK_DUPLICATES_ONE_ONLY 0x80000
+#define SEC_LINK_DUPLICATES_ONE_ONLY 0x40000
/* This value for SEC_LINK_DUPLICATES means that the linker
should warn if any duplicate sections are a different size. */
-#define SEC_LINK_DUPLICATES_SAME_SIZE 0x100000
+#define SEC_LINK_DUPLICATES_SAME_SIZE 0x80000
/* This value for SEC_LINK_DUPLICATES means that the linker
should warn if any duplicate sections contain different
relocation or other arcane processing. It is skipped when
going through the first-pass output, trusting that someone
else up the line will take care of it later. */
-#define SEC_LINKER_CREATED 0x200000
+#define SEC_LINKER_CREATED 0x100000
/* This section should not be subject to garbage collection.
Also set to inform the linker that this section should not be
listed in the link map as discarded. */
-#define SEC_KEEP 0x400000
+#define SEC_KEEP 0x200000
/* This section contains "short" data, and should be placed
"near" the GP. */
-#define SEC_SMALL_DATA 0x800000
+#define SEC_SMALL_DATA 0x400000
/* Attempt to merge identical entities in the section.
Entity size is given in the entsize field. */
-#define SEC_MERGE 0x1000000
+#define SEC_MERGE 0x800000
/* If given with SEC_MERGE, entities to merge are zero terminated
strings where entsize specifies character size instead of fixed
size entries. */
-#define SEC_STRINGS 0x2000000
+#define SEC_STRINGS 0x1000000
/* This section contains data about section groups. */
-#define SEC_GROUP 0x4000000
+#define SEC_GROUP 0x2000000
/* The section is a COFF shared library section. This flag is
only for the linker. If this type of section appears in
might be cleaner to have some more general mechanism to
allow the back end to control what the linker does with
sections. */
-#define SEC_COFF_SHARED_LIBRARY 0x10000000
+#define SEC_COFF_SHARED_LIBRARY 0x4000000
/* This section contains data which may be shared with other
executables or shared objects. This is for COFF only. */
-#define SEC_COFF_SHARED 0x20000000
+#define SEC_COFF_SHARED 0x8000000
/* When a section with this flag is being linked, then if the size of
the input section is less than a page, it should not cross a page
boundary. If the size of the input section is one page or more,
it should be aligned on a page boundary. This is for TI
TMS320C54X only. */
-#define SEC_TIC54X_BLOCK 0x40000000
+#define SEC_TIC54X_BLOCK 0x10000000
/* Conditionally link this section; do not link if there are no
references found to any symbol in the section. This is for TI
TMS320C54X only. */
-#define SEC_TIC54X_CLINK 0x80000000
+#define SEC_TIC54X_CLINK 0x20000000
+
+ /* Indicate that section has the no read flag set. This happens
+ when memory read flag isn't set. */
+#define SEC_COFF_NOREAD 0x40000000
/* End of section flags. */
output sections that have an input section. */
unsigned int linker_has_input : 1;
- /* Mark flags used by some linker backends for garbage collection. */
+ /* Mark flag used by some linker backends for garbage collection. */
unsigned int gc_mark : 1;
- unsigned int gc_mark_from_eh : 1;
/* The following flags are used by the ELF linker. */
/* Nonzero if this section has TLS related relocations. */
unsigned int has_tls_reloc:1;
+ /* Nonzero if this section has a call to __tls_get_addr. */
+ unsigned int has_tls_get_addr_call:1;
+
/* Nonzero if this section has a gp reloc. */
unsigned int has_gp_reloc:1;
/* name, id, index, next, prev, flags, user_set_vma, */ \
{ NAME, IDX, 0, NULL, NULL, FLAGS, 0, \
\
- /* linker_mark, linker_has_input, gc_mark, gc_mark_from_eh, */ \
- 0, 0, 1, 0, \
+ /* linker_mark, linker_has_input, gc_mark, */ \
+ 0, 0, 1, \
\
/* segment_mark, sec_info_type, use_rela_p, has_tls_reloc, */ \
0, 0, 0, 0, \
\
- /* has_gp_reloc, need_finalize_relax, reloc_done, */ \
- 0, 0, 0, \
+ /* has_tls_get_addr_call, has_gp_reloc, need_finalize_relax, */ \
+ 0, 0, 0, \
\
- /* vma, lma, size, rawsize */ \
- 0, 0, 0, 0, \
+ /* reloc_done, vma, lma, size, rawsize */ \
+ 0, 0, 0, 0, 0, \
\
/* output_offset, output_section, alignment_power, */ \
0, (struct bfd_section *) &SEC, 0, \
#define bfd_mach_mips9000 9000
#define bfd_mach_mips10000 10000
#define bfd_mach_mips12000 12000
+#define bfd_mach_mips14000 14000
+#define bfd_mach_mips16000 16000
#define bfd_mach_mips16 16
#define bfd_mach_mips5 5
+#define bfd_mach_mips_loongson_2e 3001
+#define bfd_mach_mips_loongson_2f 3002
#define bfd_mach_mips_sb1 12310201 /* octal 'SB', 01 */
+#define bfd_mach_mips_octeon 6501
+#define bfd_mach_mips_xlr 887682 /* decimal 'XLR' */
#define bfd_mach_mipsisa32 32
#define bfd_mach_mipsisa32r2 33
#define bfd_mach_mipsisa64 64
#define bfd_mach_ppc_rs64iii 643
#define bfd_mach_ppc_7400 7400
#define bfd_mach_ppc_e500 500
+#define bfd_mach_ppc_e500mc 5001
bfd_arch_rs6000, /* IBM RS/6000 */
#define bfd_mach_rs6k 6000
#define bfd_mach_rs6k_rs1 6001
#define bfd_mach_frvtomcat 499 /* fr500 prototype */
#define bfd_mach_fr500 500
#define bfd_mach_fr550 550
+ bfd_arch_moxie, /* The moxie processor */
+#define bfd_mach_moxie 1
bfd_arch_mcore,
bfd_arch_mep,
#define bfd_mach_mep 1
#define bfd_mach_mep_h1 0x6831
+#define bfd_mach_mep_c5 0x6335
bfd_arch_ia64, /* HP/Intel ia64 */
#define bfd_mach_ia64_elf64 64
#define bfd_mach_ia64_elf32 32
bfd_arch_avr, /* Atmel AVR microcontrollers. */
#define bfd_mach_avr1 1
#define bfd_mach_avr2 2
+#define bfd_mach_avr25 25
#define bfd_mach_avr3 3
+#define bfd_mach_avr31 31
+#define bfd_mach_avr35 35
#define bfd_mach_avr4 4
#define bfd_mach_avr5 5
+#define bfd_mach_avr51 51
#define bfd_mach_avr6 6
bfd_arch_bfin, /* ADI Blackfin */
#define bfd_mach_bfin 1
#define bfd_mach_s390_31 31
#define bfd_mach_s390_64 64
bfd_arch_score, /* Sunplus score */
+#define bfd_mach_score3 3
+#define bfd_mach_score7 7
bfd_arch_openrisc, /* OpenRISC */
bfd_arch_mmix, /* Donald Knuth's educational processor. */
bfd_arch_xstormy16,
#define bfd_mach_z80 3 /* With ixl, ixh, iyl, and iyh. */
#define bfd_mach_z80full 7 /* All undocumented instructions. */
#define bfd_mach_r800 11 /* R800: successor with multiplication. */
+ bfd_arch_lm32, /* Lattice Mico32 */
+#define bfd_mach_lm32 1
bfd_arch_last
};
BFD_RELOC_68K_GLOB_DAT,
BFD_RELOC_68K_JMP_SLOT,
BFD_RELOC_68K_RELATIVE,
+ BFD_RELOC_68K_TLS_GD32,
+ BFD_RELOC_68K_TLS_GD16,
+ BFD_RELOC_68K_TLS_GD8,
+ BFD_RELOC_68K_TLS_LDM32,
+ BFD_RELOC_68K_TLS_LDM16,
+ BFD_RELOC_68K_TLS_LDM8,
+ BFD_RELOC_68K_TLS_LDO32,
+ BFD_RELOC_68K_TLS_LDO16,
+ BFD_RELOC_68K_TLS_LDO8,
+ BFD_RELOC_68K_TLS_IE32,
+ BFD_RELOC_68K_TLS_IE16,
+ BFD_RELOC_68K_TLS_IE8,
+ BFD_RELOC_68K_TLS_LE32,
+ BFD_RELOC_68K_TLS_LE16,
+ BFD_RELOC_68K_TLS_LE8,
/* Linkage-table relative. */
BFD_RELOC_32_BASEREL,
BFD_RELOC_SPARC_UA16,
BFD_RELOC_SPARC_UA32,
BFD_RELOC_SPARC_UA64,
+ BFD_RELOC_SPARC_GOTDATA_HIX22,
+ BFD_RELOC_SPARC_GOTDATA_LOX10,
+ BFD_RELOC_SPARC_GOTDATA_OP_HIX22,
+ BFD_RELOC_SPARC_GOTDATA_OP_LOX10,
+ BFD_RELOC_SPARC_GOTDATA_OP,
/* I think these are specific to SPARC a.out (e.g., Sun 4). */
BFD_RELOC_SPARC_BASE13,
STO_ALPHA_STD_GPLOAD. */
BFD_RELOC_ALPHA_BRSGP,
+/* The NOP relocation outputs a NOP if the longword displacement
+between two procedure entry points is < 2^21. */
+ BFD_RELOC_ALPHA_NOP,
+
+/* The BSR relocation outputs a BSR if the longword displacement
+between two procedure entry points is < 2^21. */
+ BFD_RELOC_ALPHA_BSR,
+
+/* The LDA relocation outputs a LDA if the longword displacement
+between two procedure entry points is < 2^16. */
+ BFD_RELOC_ALPHA_LDA,
+
+/* The BOH relocation outputs a BSR if the longword displacement
+between two procedure entry points is < 2^21, or else a hint. */
+ BFD_RELOC_ALPHA_BOH,
+
/* Alpha thread-local storage relocations. */
BFD_RELOC_ALPHA_TLSGD,
BFD_RELOC_ALPHA_TLSLDM,
/* Low 16 bits of pc-relative value */
BFD_RELOC_LO16_PCREL,
+/* Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
+16-bit immediate fields */
+ BFD_RELOC_MIPS16_GOT16,
+ BFD_RELOC_MIPS16_CALL16,
+
/* MIPS16 high 16 bits of 32-bit value. */
BFD_RELOC_MIPS16_HI16,
BFD_RELOC_MIPS_TLS_TPREL_LO16,
-/* MIPS ELF relocations (VxWorks extensions). */
+/* MIPS ELF relocations (VxWorks and PLT extensions). */
BFD_RELOC_MIPS_COPY,
BFD_RELOC_MIPS_JUMP_SLOT,
in the same section. */
BFD_RELOC_MN10300_SYM_DIFF,
+/* The addend of this reloc is an alignment power that must
+be honoured at the offset's location, regardless of linker
+relaxation. */
+ BFD_RELOC_MN10300_ALIGN,
+
/* i386/elf relocations */
BFD_RELOC_386_GOT32,
/* PowerPC and PowerPC64 thread-local storage relocations. */
BFD_RELOC_PPC_TLS,
+ BFD_RELOC_PPC_TLSGD,
+ BFD_RELOC_PPC_TLSLD,
BFD_RELOC_PPC_DTPMOD,
BFD_RELOC_PPC_TPREL16,
BFD_RELOC_PPC_TPREL16_LO,
BFD_RELOC_ARM_LDC_SB_G1,
BFD_RELOC_ARM_LDC_SB_G2,
+/* Annotation of BX instructions. */
+ BFD_RELOC_ARM_V4BX,
+
/* These relocs are only used within the ARM assembler. They are not
(at present) written to any object files. */
BFD_RELOC_ARM_IMMEDIATE,
BFD_RELOC_390_GOTPLT20,
BFD_RELOC_390_TLS_GOTIE20,
-/* Score relocations */
- BFD_RELOC_SCORE_DUMMY1,
-
-/* Low 16 bit for load/store */
+/* Score relocations
+Low 16 bit for load/store */
BFD_RELOC_SCORE_GPREL15,
/* This is a 24-bit reloc with the right 1 bit assumed to be 0 */
/* This is a 19-bit reloc with the right 1 bit assumed to be 0 */
BFD_RELOC_SCORE_BRANCH,
+/* This is a 32-bit reloc for 48-bit instructions. */
+ BFD_RELOC_SCORE_IMM30,
+
+/* This is a 32-bit reloc for 48-bit instructions. */
+ BFD_RELOC_SCORE_IMM32,
+
/* This is a 11-bit reloc with the right 1 bit assumed to be 0 */
BFD_RELOC_SCORE16_JMP,
/* This is a 8-bit reloc with the right 1 bit assumed to be 0 */
BFD_RELOC_SCORE16_BRANCH,
+/* This is a 9-bit reloc with the right 1 bit assumed to be 0 */
+ BFD_RELOC_SCORE_BCMP,
+
/* Undocumented Score relocs */
BFD_RELOC_SCORE_GOT15,
BFD_RELOC_SCORE_GOT_LO16,
BFD_RELOC_CR16_SWITCH8,
BFD_RELOC_CR16_SWITCH16,
BFD_RELOC_CR16_SWITCH32,
+ BFD_RELOC_CR16_GOT_REGREL20,
+ BFD_RELOC_CR16_GOTC_REGREL20,
+ BFD_RELOC_CR16_GLOB_DAT,
/* NS CRX Relocations. */
BFD_RELOC_CRX_REL4,
/* 32-bit offset to symbol with PLT entry, relative to this relocation. */
BFD_RELOC_CRIS_32_PLT_PCREL,
+/* Relocs used in TLS code for CRIS. */
+ BFD_RELOC_CRIS_32_GOT_GD,
+ BFD_RELOC_CRIS_16_GOT_GD,
+ BFD_RELOC_CRIS_32_GD,
+ BFD_RELOC_CRIS_DTP,
+ BFD_RELOC_CRIS_32_DTPREL,
+ BFD_RELOC_CRIS_16_DTPREL,
+ BFD_RELOC_CRIS_32_GOT_TPREL,
+ BFD_RELOC_CRIS_16_GOT_TPREL,
+ BFD_RELOC_CRIS_32_TPREL,
+ BFD_RELOC_CRIS_16_TPREL,
+ BFD_RELOC_CRIS_DTPMOD,
+ BFD_RELOC_CRIS_32_IE,
+
/* Intel i860 Relocations. */
BFD_RELOC_860_COPY,
BFD_RELOC_860_GLOB_DAT,
BFD_RELOC_XTENSA_ASM_EXPAND. */
BFD_RELOC_XTENSA_ASM_SIMPLIFY,
+/* Xtensa TLS relocations. */
+ BFD_RELOC_XTENSA_TLSDESC_FN,
+ BFD_RELOC_XTENSA_TLSDESC_ARG,
+ BFD_RELOC_XTENSA_TLS_DTPOFF,
+ BFD_RELOC_XTENSA_TLS_TPOFF,
+ BFD_RELOC_XTENSA_TLS_FUNC,
+ BFD_RELOC_XTENSA_TLS_ARG,
+ BFD_RELOC_XTENSA_TLS_CALL,
+
/* 8 bit signed offset in (ix+d) or (iy+d). */
BFD_RELOC_Z80_DISP8,
/* 4 bit value. */
BFD_RELOC_Z8K_IMM4L,
+
+/* Lattice Mico32 relocations. */
+ BFD_RELOC_LM32_CALL,
+ BFD_RELOC_LM32_BRANCH,
+ BFD_RELOC_LM32_16_GOT,
+ BFD_RELOC_LM32_GOTOFF_HI16,
+ BFD_RELOC_LM32_GOTOFF_LO16,
+ BFD_RELOC_LM32_COPY,
+ BFD_RELOC_LM32_GLOB_DAT,
+ BFD_RELOC_LM32_JMP_SLOT,
+ BFD_RELOC_LM32_RELATIVE,
BFD_RELOC_UNUSED };
typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
reloc_howto_type *bfd_reloc_type_lookup
symvalue value;
/* Attributes of a symbol. */
-#define BSF_NO_FLAGS 0x00
+#define BSF_NO_FLAGS 0x00
/* The symbol has local scope; <<static>> in <<C>>. The value
is the offset into the section of the data. */
-#define BSF_LOCAL 0x01
+#define BSF_LOCAL (1 << 0)
/* The symbol has global scope; initialized data in <<C>>. The
value is the offset into the section of the data. */
-#define BSF_GLOBAL 0x02
+#define BSF_GLOBAL (1 << 1)
/* The symbol has global scope and is exported. The value is
the offset into the section of the data. */
#define BSF_EXPORT BSF_GLOBAL /* No real difference. */
/* A normal C symbol would be one of:
- <<BSF_LOCAL>>, <<BSF_FORT_COMM>>, <<BSF_UNDEFINED>> or
+ <<BSF_LOCAL>>, <<BSF_COMMON>>, <<BSF_UNDEFINED>> or
<<BSF_GLOBAL>>. */
/* The symbol is a debugging record. The value has an arbitrary
meaning, unless BSF_DEBUGGING_RELOC is also set. */
-#define BSF_DEBUGGING 0x08
+#define BSF_DEBUGGING (1 << 2)
/* The symbol denotes a function entry point. Used in ELF,
perhaps others someday. */
-#define BSF_FUNCTION 0x10
+#define BSF_FUNCTION (1 << 3)
/* Used by the linker. */
-#define BSF_KEEP 0x20
-#define BSF_KEEP_G 0x40
+#define BSF_KEEP (1 << 5)
+#define BSF_KEEP_G (1 << 6)
/* A weak global symbol, overridable without warnings by
a regular global symbol of the same name. */
-#define BSF_WEAK 0x80
+#define BSF_WEAK (1 << 7)
/* This symbol was created to point to a section, e.g. ELF's
STT_SECTION symbols. */
-#define BSF_SECTION_SYM 0x100
+#define BSF_SECTION_SYM (1 << 8)
/* The symbol used to be a common symbol, but now it is
allocated. */
-#define BSF_OLD_COMMON 0x200
-
- /* The default value for common data. */
-#define BFD_FORT_COMM_DEFAULT_VALUE 0
+#define BSF_OLD_COMMON (1 << 9)
/* In some files the type of a symbol sometimes alters its
location in an output file - ie in coff a <<ISFCN>> symbol
which is also <<C_EXT>> symbol appears where it was
declared and not at the end of a section. This bit is set
by the target BFD part to convey this information. */
-#define BSF_NOT_AT_END 0x400
+#define BSF_NOT_AT_END (1 << 10)
/* Signal that the symbol is the label of constructor section. */
-#define BSF_CONSTRUCTOR 0x800
+#define BSF_CONSTRUCTOR (1 << 11)
/* Signal that the symbol is a warning symbol. The name is a
warning. The name of the next symbol is the one to warn about;
if a reference is made to a symbol with the same name as the next
symbol, a warning is issued by the linker. */
-#define BSF_WARNING 0x1000
+#define BSF_WARNING (1 << 12)
/* Signal that the symbol is indirect. This symbol is an indirect
pointer to the symbol with the same name as the next symbol. */
-#define BSF_INDIRECT 0x2000
+#define BSF_INDIRECT (1 << 13)
/* BSF_FILE marks symbols that contain a file name. This is used
for ELF STT_FILE symbols. */
-#define BSF_FILE 0x4000
+#define BSF_FILE (1 << 14)
/* Symbol is from dynamic linking information. */
-#define BSF_DYNAMIC 0x8000
+#define BSF_DYNAMIC (1 << 15)
/* The symbol denotes a data object. Used in ELF, and perhaps
others someday. */
-#define BSF_OBJECT 0x10000
+#define BSF_OBJECT (1 << 16)
/* This symbol is a debugging symbol. The value is the offset
into the section of the data. BSF_DEBUGGING should be set
as well. */
-#define BSF_DEBUGGING_RELOC 0x20000
+#define BSF_DEBUGGING_RELOC (1 << 17)
/* This symbol is thread local. Used in ELF. */
-#define BSF_THREAD_LOCAL 0x40000
+#define BSF_THREAD_LOCAL (1 << 18)
/* This symbol represents a complex relocation expression,
with the expression tree serialized in the symbol name. */
-#define BSF_RELC 0x80000
+#define BSF_RELC (1 << 19)
/* This symbol represents a signed complex relocation expression,
with the expression tree serialized in the symbol name. */
-#define BSF_SRELC 0x100000
+#define BSF_SRELC (1 << 20)
+
+ /* This symbol was created by bfd_get_synthetic_symtab. */
+#define BSF_SYNTHETIC (1 << 21)
+
+ /* This symbol is an indirect code object. Unrelated to BSF_INDIRECT.
+ The dynamic linker will compute the value of this symbol by
+ calling the function that it points to. BSF_FUNCTION must
+ also be also set. */
+#define BSF_GNU_INDIRECT_FUNCTION (1 << 22)
flagword flags;
void *iostream;
const struct bfd_iovec *iovec;
- /* Is the file descriptor being cached? That is, can it be closed as
- needed, and re-opened when accessed later? */
- bfd_boolean cacheable;
-
- /* Marks whether there was a default target specified when the
- BFD was opened. This is used to select which matching algorithm
- to use to choose the back end. */
- bfd_boolean target_defaulted;
-
/* The caching routines use these to maintain a
least-recently-used list of BFDs. */
struct bfd *lru_prev, *lru_next;
state information on the file here... */
ufile_ptr where;
- /* ... and here: (``once'' means at least once). */
- bfd_boolean opened_once;
-
- /* Set if we have a locally maintained mtime value, rather than
- getting it from the file each time. */
- bfd_boolean mtime_set;
-
/* File modified time, if mtime_set is TRUE. */
long mtime;
/* Format_specific flags. */
flagword flags;
+ /* Values that may appear in the flags field of a BFD. These also
+ appear in the object_flags field of the bfd_target structure, where
+ they indicate the set of flags used by that backend (not all flags
+ are meaningful for all object file formats) (FIXME: at the moment,
+ the object_flags values have mostly just been copied from backend
+ to another, and are not necessarily correct). */
+
+#define BFD_NO_FLAGS 0x00
+
+ /* BFD contains relocation entries. */
+#define HAS_RELOC 0x01
+
+ /* BFD is directly executable. */
+#define EXEC_P 0x02
+
+ /* BFD has line number information (basically used for F_LNNO in a
+ COFF header). */
+#define HAS_LINENO 0x04
+
+ /* BFD has debugging information. */
+#define HAS_DEBUG 0x08
+
+ /* BFD has symbols. */
+#define HAS_SYMS 0x10
+
+ /* BFD has local symbols (basically used for F_LSYMS in a COFF
+ header). */
+#define HAS_LOCALS 0x20
+
+ /* BFD is a dynamic object. */
+#define DYNAMIC 0x40
+
+ /* Text section is write protected (if D_PAGED is not set, this is
+ like an a.out NMAGIC file) (the linker sets this by default, but
+ clears it for -r or -N). */
+#define WP_TEXT 0x80
+
+ /* BFD is dynamically paged (this is like an a.out ZMAGIC file) (the
+ linker sets this by default, but clears it for -r or -n or -N). */
+#define D_PAGED 0x100
+
+ /* BFD is relaxable (this means that bfd_relax_section may be able to
+ do something) (sometimes bfd_relax_section can do something even if
+ this is not set). */
+#define BFD_IS_RELAXABLE 0x200
+
+ /* This may be set before writing out a BFD to request using a
+ traditional format. For example, this is used to request that when
+ writing out an a.out object the symbols not be hashed to eliminate
+ duplicates. */
+#define BFD_TRADITIONAL_FORMAT 0x400
+
+ /* This flag indicates that the BFD contents are actually cached
+ in memory. If this is set, iostream points to a bfd_in_memory
+ struct. */
+#define BFD_IN_MEMORY 0x800
+
+ /* The sections in this BFD specify a memory page. */
+#define HAS_LOAD_PAGE 0x1000
+
+ /* This BFD has been created by the linker and doesn't correspond
+ to any input file. */
+#define BFD_LINKER_CREATED 0x2000
+
+ /* This may be set before writing out a BFD to request that it
+ be written using values for UIDs, GIDs, timestamps, etc. that
+ will be consistent from run to run. */
+#define BFD_DETERMINISTIC_OUTPUT 0x4000
+
/* Currently my_archive is tested before adding origin to
anything. I believe that this can become always an add of
origin, with origin set to 0 for non archive files. */
ufile_ptr origin;
- /* Remember when output has begun, to stop strange things
- from happening. */
- bfd_boolean output_has_begun;
+ /* The origin in the archive of the proxy entry. This will
+ normally be the same as origin, except for thin archives,
+ when it will contain the current offset of the proxy in the
+ thin archive rather than the offset of the bfd in its actual
+ container. */
+ ufile_ptr proxy_origin;
/* A hash table for section names. */
struct bfd_hash_table section_htab;
/* Used for input and output. */
unsigned int symcount;
- /* Symbol table for output BFD (with symcount entries). */
+ /* Symbol table for output BFD (with symcount entries).
+ Also used by the linker to cache input BFD symbols. */
struct bfd_symbol **outsymbols;
/* Used for slurped dynamic symbol tables. */
/* Pointer to structure which contains architecture information. */
const struct bfd_arch_info *arch_info;
- /* Flag set if symbols from this BFD should not be exported. */
- bfd_boolean no_export;
-
/* Stuff only useful for archives. */
void *arelt_data;
struct bfd *my_archive; /* The containing archive BFD. */
struct bfd *archive_next; /* The next BFD in the archive. */
struct bfd *archive_head; /* The first BFD in the archive. */
- bfd_boolean has_armap;
+ struct bfd *nested_archives; /* List of nested archive in a flattened
+ thin archive. */
/* A chain of BFD structures involved in a link. */
struct bfd *link_next;
struct ieee_data_struct *ieee_data;
struct ieee_ar_data_struct *ieee_ar_data;
struct srec_data_struct *srec_data;
+ struct verilog_data_struct *verilog_data;
struct ihex_data_struct *ihex_data;
struct tekhex_data_struct *tekhex_data;
struct elf_obj_tdata *elf_obj_data;
struct objalloc *, but we use void * to avoid requiring the inclusion
of objalloc.h. */
void *memory;
+
+ /* Is the file descriptor being cached? That is, can it be closed as
+ needed, and re-opened when accessed later? */
+ unsigned int cacheable : 1;
+
+ /* Marks whether there was a default target specified when the
+ BFD was opened. This is used to select which matching algorithm
+ to use to choose the back end. */
+ unsigned int target_defaulted : 1;
+
+ /* ... and here: (``once'' means at least once). */
+ unsigned int opened_once : 1;
+
+ /* Set if we have a locally maintained mtime value, rather than
+ getting it from the file each time. */
+ unsigned int mtime_set : 1;
+
+ /* Flag set if symbols from this BFD should not be exported. */
+ unsigned int no_export : 1;
+
+ /* Remember when output has begun, to stop strange things
+ from happening. */
+ unsigned int output_has_begun : 1;
+
+ /* Have archive map. */
+ unsigned int has_armap : 1;
+
+ /* Set if this is a thin archive. */
+ unsigned int is_thin_archive : 1;
};
typedef enum bfd_error
bfd_target_oasys_flavour,
bfd_target_tekhex_flavour,
bfd_target_srec_flavour,
+ bfd_target_verilog_flavour,
bfd_target_ihex_flavour,
bfd_target_som_flavour,
bfd_target_os9k_flavour,
NAME##_bfd_merge_sections, \
NAME##_bfd_is_group_section, \
NAME##_bfd_discard_group, \
- NAME##_section_already_linked \
+ NAME##_section_already_linked, \
+ NAME##_bfd_define_common_symbol
int (*_bfd_sizeof_headers) (bfd *, struct bfd_link_info *);
bfd_byte * (*_bfd_get_relocated_section_contents)
void (*_section_already_linked) (bfd *, struct bfd_section *,
struct bfd_link_info *);
+ /* Define a common symbol. */
+ bfd_boolean (*_bfd_define_common_symbol) (bfd *, struct bfd_link_info *,
+ struct bfd_link_hash_entry *);
+
/* Routines to handle dynamic symbols and relocs. */
#define BFD_JUMP_TABLE_DYNAMIC(NAME) \
NAME##_get_dynamic_symtab_upper_bound, \
#define bfd_section_already_linked(abfd, sec, info) \
BFD_SEND (abfd, _section_already_linked, (abfd, sec, info))
+bfd_boolean bfd_generic_define_common_symbol
+ (bfd *output_bfd, struct bfd_link_info *info,
+ struct bfd_link_hash_entry *h);
+
+#define bfd_define_common_symbol(output_bfd, info, h) \
+ BFD_SEND (output_bfd, _bfd_define_common_symbol, (output_bfd, info, h))
+
/* Extracted from simple.c. */
bfd_byte *bfd_simple_get_relocated_section_contents
(bfd *abfd, asection *sec, bfd_byte *outbuf, asymbol **symbol_table);
+/* Extracted from compress.c. */
+bfd_boolean bfd_uncompress_section_contents
+ (bfd_byte **buffer, bfd_size_type *size);
+
#ifdef __cplusplus
}
#endif
projects / deliverable / binutils-gdb.git / blobdiff