to another, and are not necessarily correct). */
/* No flags. */
-#define NO_FLAGS 0x00
+#define BFD_NO_FLAGS 0x00
/* BFD contains relocation entries. */
#define HAS_RELOC 0x01
bfd_copy_private_section_data PARAMS ((bfd *ibfd, asection *isec, bfd *obfd, asection *osec));
#define bfd_copy_private_section_data(ibfd, isection, obfd, osection) \
- BFD_SEND (ibfd, _bfd_copy_private_section_data, \
+ BFD_SEND (obfd, _bfd_copy_private_section_data, \
(ibfd, isection, obfd, osection))
enum bfd_architecture
{
#define bfd_mach_z8002 2
bfd_arch_h8500, /* Hitachi H8/500 */
bfd_arch_sh, /* Hitachi SH */
+ /* start-sanitize-tic80 */
+ bfd_arch_tic80, /* TI TMS320C80 (MVP) */
+ /* end-sanitize-tic80 */
bfd_arch_alpha, /* Dec Alpha */
bfd_arch_arm, /* Advanced Risc Machines ARM */
bfd_arch_ns32k, /* National Semiconductors ns32000 */
bfd_arch_w65, /* WDC 65816 */
+ /* start-sanitize-v850 */
+ bfd_arch_v850, /* NEC V850 */
+ /* end-sanitize-v850 */
/* start-sanitize-arc */
bfd_arch_arc, /* Argonaut RISC Core */
#define bfd_mach_arc_base 0
#define bfd_mach_arc_graphics 2
#define bfd_mach_arc_audio 3
/* end-sanitize-arc */
+ /* start-sanitize-m32r */
+ bfd_arch_m32r, /* Mitsubishi M32R */
+ /* end-sanitize-m32r */
+ bfd_arch_mn10200, /* Matsushita MN10200 */
+ bfd_arch_mn10300, /* Matsushita MN10300 */
bfd_arch_last
};
BFD_RELOC_GPREL16,
BFD_RELOC_GPREL32,
-/* For openVMS/Alpha systems, these are displacements for switch
-tables. */
- BFD_RELOC_SWREL32,
- BFD_RELOC_SWREL64,
-
/* Reloc types used for i960/b.out. */
BFD_RELOC_I960_CALLJ,
in with the file's GP value on reading, for convenience, as with the
GPDISP_LO16 reloc.
+The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
+It should refer to the symbol to be referenced, as with 16_GOTOFF,
+but it generates output not based on the position within the .got
+section, but relative to the GP value chosen for the file during the
+final link stage.
+
The LITUSE reloc, on the instruction using the loaded address, gives
information to the linker that it might be able to use to optimize
away some literal section references. The symbol is ignored (read
The GNU linker currently doesn't do any of this optimizing. */
BFD_RELOC_ALPHA_LITERAL,
+ BFD_RELOC_ALPHA_ELF_LITERAL,
BFD_RELOC_ALPHA_LITUSE,
/* The HINT relocation indicates a value that should be filled into the
prediction logic which may be provided on some processors. */
BFD_RELOC_ALPHA_HINT,
-/* The LINKAGE relocation outputs a special code in the object file,
-the rest is handled by the linker. */
+/* The LINKAGE relocation outputs a linkage pair in the object file,
+which is filled by the linker. */
BFD_RELOC_ALPHA_LINKAGE,
-/* The BASEREG relocation calculates differences to basereg. */
- BFD_RELOC_ALPHA_BASEREG,
-
/* Bits 27..2 of the relocation address shifted right 2 bits;
simple reloc otherwise. */
BFD_RELOC_MIPS_JMP,
+/* The MIPS16 jump instruction. */
+ BFD_RELOC_MIPS16_JMP,
+
/* High 16 bits of 32-bit value; simple reloc. */
BFD_RELOC_HI16,
BFD_RELOC_ARM_LDR_IMM,
BFD_RELOC_ARM_LITERAL,
BFD_RELOC_ARM_IN_POOL,
+ BFD_RELOC_ARM_OFFSET_IMM8,
+ BFD_RELOC_ARM_HWLITERAL,
+ BFD_RELOC_ARM_THUMB_ADD,
+ BFD_RELOC_ARM_THUMB_IMM,
+ BFD_RELOC_ARM_THUMB_SHIFT,
+ BFD_RELOC_ARM_THUMB_OFFSET,
+
+/* Hitachi SH relocs. Not all of these appear in object files. */
+ BFD_RELOC_SH_PCDISP8BY2,
+ BFD_RELOC_SH_PCDISP12BY2,
+ BFD_RELOC_SH_IMM4,
+ BFD_RELOC_SH_IMM4BY2,
+ BFD_RELOC_SH_IMM4BY4,
+ BFD_RELOC_SH_IMM8,
+ BFD_RELOC_SH_IMM8BY2,
+ BFD_RELOC_SH_IMM8BY4,
+ BFD_RELOC_SH_PCRELIMM8BY2,
+ BFD_RELOC_SH_PCRELIMM8BY4,
+ BFD_RELOC_SH_SWITCH16,
+ BFD_RELOC_SH_SWITCH32,
+ BFD_RELOC_SH_USES,
+ BFD_RELOC_SH_COUNT,
+ BFD_RELOC_SH_ALIGN,
+ BFD_RELOC_SH_CODE,
+ BFD_RELOC_SH_DATA,
+ BFD_RELOC_SH_LABEL,
/* start-sanitize-arc */
/* Argonaut RISC Core (ARC) relocs.
BFD_RELOC_D10V_18_PCREL,
/* end-sanitize-d10v */
+/* start-sanitize-m32r */
+
+/* Mitsubishi M32R relocs.
+This is a 24 bit absolute address. */
+ BFD_RELOC_M32R_24,
+
+/* This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0. */
+ BFD_RELOC_M32R_10_PCREL,
+
+/* This is an 18-bit reloc with the right 2 bits assumed to be 0. */
+ BFD_RELOC_M32R_18_PCREL,
+
+/* This is an 26-bit reloc with the right 2 bits assumed to be 0. */
+ BFD_RELOC_M32R_26_PCREL,
+/* end-sanitize-m32r */
+
+/* start-sanitize-v850 */
+
+/* This is a 9-bit reloc */
+ BFD_RELOC_V850_9_PCREL,
+
+/* This is a 22-bit reloc */
+ BFD_RELOC_V850_22_PCREL,
+
+/* This is an offset from the short data area pointer.. */
+ BFD_RELOC_V850_SDA_OFFSET,
+
+/* This is an offset from the zero data area pointer.. */
+ BFD_RELOC_V850_ZDA_OFFSET,
+
+/* This is an offset from the tiny data area pointer.. */
+ BFD_RELOC_V850_TDA_OFFSET,
+/* end-sanitize-v850 */
+
+
+/* This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
+instruction. */
+ BFD_RELOC_MN10300_32_PCREL,
+
+/* This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
+instruction. */
+ BFD_RELOC_MN10300_16_PCREL,
BFD_RELOC_UNUSED };
typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
reloc_howto_type *
bfd_copy_private_symbol_data PARAMS ((bfd *ibfd, asymbol *isym, bfd *obfd, asymbol *osym));
#define bfd_copy_private_symbol_data(ibfd, isymbol, obfd, osymbol) \
- BFD_SEND (ibfd, _bfd_copy_private_symbol_data, \
+ BFD_SEND (obfd, _bfd_copy_private_symbol_data, \
(ibfd, isymbol, obfd, osymbol))
struct _bfd
{
bfd_copy_private_bfd_data PARAMS ((bfd *ibfd, bfd *obfd));
#define bfd_copy_private_bfd_data(ibfd, obfd) \
- BFD_SEND (ibfd, _bfd_copy_private_bfd_data, \
+ BFD_SEND (obfd, _bfd_copy_private_bfd_data, \
(ibfd, obfd))
boolean
bfd_merge_private_bfd_data PARAMS ((bfd *ibfd, bfd *obfd));
#define bfd_merge_private_bfd_data(ibfd, obfd) \
- BFD_SEND (ibfd, _bfd_merge_private_bfd_data, \
+ BFD_SEND (obfd, _bfd_merge_private_bfd_data, \
(ibfd, obfd))
boolean
bfd_set_private_flags PARAMS ((bfd *abfd, flagword flags));
projects / deliverable / binutils-gdb.git / blobdiff