-/* Hitachi H8/300 COFF back-end for BFD.
- Copyright (C) 1990-1991 Free Software Foundation, Inc.
- Written by Steve Chamberlain
- sac@cygnus.com
+/* BFD back-end for Renesas H8/300 COFF binaries.
+ Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001, 2002, 2003, 2004, 2005, 2006
+ Free Software Foundation, Inc.
+ Written by Steve Chamberlain, <sac@cygnus.com>.
-This file is part of BFD, the Binary File Descriptor library.
+ This file is part of BFD, the Binary File Descriptor library.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
#include "bfd.h"
#include "sysdep.h"
#include "libbfd.h"
-#include "obstack.h"
+#include "bfdlink.h"
+#include "genlink.h"
#include "coff/h8300.h"
#include "coff/internal.h"
#include "libcoff.h"
+#include "libiberty.h"
-static reloc_howto_type howto_table[] =
-{
- HOWTO(R_RELBYTE, 0, 0, 8, false, 0, true, true,0,"8", true, 0x000000ff,0x000000ff, false),
- HOWTO(R_RELWORD, 0, 1, 16, false, 0, true, true,0,"16", true, 0x0000ffff,0x0000ffff, false),
- HOWTO(R_RELLONG, 0, 2, 32, false, 0, true, true,0,"32", true, 0xffffffff,0xffffffff, false),
- HOWTO(R_PCRBYTE, 0, 0, 8, true, 0, false, true,0,"DISP8", true, 0x000000ff,0x000000ff, true),
- HOWTO(R_PCRWORD, 0, 1, 16, true, 0, false, true,0,"DISP16", true, 0x0000ffff,0x0000ffff, true),
- HOWTO(R_PCRLONG, 0, 2, 32, true, 0, false, true,0,"DISP32", true, 0xffffffff,0xffffffff, true),
- HOWTO(R_MOVB1, 0, 1, 16, false, 0, true,
- true,0,"16/8", true, 0x0000ffff,0x0000ffff, false),
- HOWTO(R_MOVB2, 0, 1, 16, false, 0, true,
- true,0,"8/16", true, 0x0000ffff,0x0000ffff, false),
- HOWTO(R_JMP1, 0, 1, 16, false, 0, true, true,0,"16/pcrel", true, 0x0000ffff,0x0000ffff, false),
- HOWTO(R_JMP2, 0, 0, 8, false, 0, true, true,0,"pcrecl/16", true, 0x000000ff,0x000000ff, false),
+#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1)
+
+/* We derive a hash table from the basic BFD hash table to
+ hold entries in the function vector. Aside from the
+ info stored by the basic hash table, we need the offset
+ of a particular entry within the hash table as well as
+ the offset where we'll add the next entry. */
+
+struct funcvec_hash_entry
+ {
+ /* The basic hash table entry. */
+ struct bfd_hash_entry root;
+
+ /* The offset within the vectors section where
+ this entry lives. */
+ bfd_vma offset;
+ };
+
+struct funcvec_hash_table
+ {
+ /* The basic hash table. */
+ struct bfd_hash_table root;
+
+ bfd *abfd;
+
+ /* Offset at which we'll add the next entry. */
+ unsigned int offset;
+ };
+static struct bfd_hash_entry *
+funcvec_hash_newfunc
+ (struct bfd_hash_entry *, struct bfd_hash_table *, const char *);
+
+static bfd_reloc_status_type special
+ (bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **);
+static int select_reloc
+ (reloc_howto_type *);
+static void rtype2howto
+ (arelent *, struct internal_reloc *);
+static void reloc_processing
+ (arelent *, struct internal_reloc *, asymbol **, bfd *, asection *);
+static bfd_boolean h8300_symbol_address_p
+ (bfd *, asection *, bfd_vma);
+static int h8300_reloc16_estimate
+ (bfd *, asection *, arelent *, unsigned int,
+ struct bfd_link_info *);
+static void h8300_reloc16_extra_cases
+ (bfd *, struct bfd_link_info *, struct bfd_link_order *, arelent *,
+ bfd_byte *, unsigned int *, unsigned int *);
+static bfd_boolean h8300_bfd_link_add_symbols
+ (bfd *, struct bfd_link_info *);
+
+/* To lookup a value in the function vector hash table. */
+#define funcvec_hash_lookup(table, string, create, copy) \
+ ((struct funcvec_hash_entry *) \
+ bfd_hash_lookup (&(table)->root, (string), (create), (copy)))
+
+/* The derived h8300 COFF linker table. Note it's derived from
+ the generic linker hash table, not the COFF backend linker hash
+ table! We use this to attach additional data structures we
+ need while linking on the h8300. */
+struct h8300_coff_link_hash_table {
+ /* The main hash table. */
+ struct generic_link_hash_table root;
+
+ /* Section for the vectors table. This gets attached to a
+ random input bfd, we keep it here for easy access. */
+ asection *vectors_sec;
+
+ /* Hash table of the functions we need to enter into the function
+ vector. */
+ struct funcvec_hash_table *funcvec_hash_table;
};
+static struct bfd_link_hash_table *h8300_coff_link_hash_table_create (bfd *);
-/* Turn a howto into a reloc number */
+/* Get the H8/300 COFF linker hash table from a link_info structure. */
-#define SELECT_RELOC(x,howto) \
- { x = howto_table[howto->size +(int)howto->pc_relative*3].type; }
+#define h8300_coff_hash_table(p) \
+ ((struct h8300_coff_link_hash_table *) ((coff_hash_table (p))))
-#define BADMAG(x) H8300BADMAG(x)
-#define H8300 1 /* Customize coffcode.h */
-#define __A_MAGIC_SET__
+/* Initialize fields within a funcvec hash table entry. Called whenever
+ a new entry is added to the funcvec hash table. */
+
+static struct bfd_hash_entry *
+funcvec_hash_newfunc (struct bfd_hash_entry *entry,
+ struct bfd_hash_table *gen_table,
+ const char *string)
+{
+ struct funcvec_hash_entry *ret;
+ struct funcvec_hash_table *table;
+
+ ret = (struct funcvec_hash_entry *) entry;
+ table = (struct funcvec_hash_table *) gen_table;
+
+ /* Allocate the structure if it has not already been allocated by a
+ subclass. */
+ if (ret == NULL)
+ ret = ((struct funcvec_hash_entry *)
+ bfd_hash_allocate (gen_table,
+ sizeof (struct funcvec_hash_entry)));
+ if (ret == NULL)
+ return NULL;
+
+ /* Call the allocation method of the superclass. */
+ ret = ((struct funcvec_hash_entry *)
+ bfd_hash_newfunc ((struct bfd_hash_entry *) ret, gen_table, string));
+
+ if (ret == NULL)
+ return NULL;
+
+ /* Note where this entry will reside in the function vector table. */
+ ret->offset = table->offset;
+
+ /* Bump the offset at which we store entries in the function
+ vector. We'd like to bump up the size of the vectors section,
+ but it's not easily available here. */
+ switch (bfd_get_mach (table->abfd))
+ {
+ case bfd_mach_h8300:
+ case bfd_mach_h8300hn:
+ case bfd_mach_h8300sn:
+ table->offset += 2;
+ break;
+ case bfd_mach_h8300h:
+ case bfd_mach_h8300s:
+ table->offset += 4;
+ break;
+ default:
+ return NULL;
+ }
+
+ /* Everything went OK. */
+ return (struct bfd_hash_entry *) ret;
+}
+
+/* Initialize the function vector hash table. */
+
+static bfd_boolean
+funcvec_hash_table_init (struct funcvec_hash_table *table,
+ bfd *abfd,
+ struct bfd_hash_entry *(*newfunc)
+ (struct bfd_hash_entry *,
+ struct bfd_hash_table *,
+ const char *),
+ unsigned int entsize)
+{
+ /* Initialize our local fields, then call the generic initialization
+ routine. */
+ table->offset = 0;
+ table->abfd = abfd;
+ return (bfd_hash_table_init (&table->root, newfunc, entsize));
+}
+
+/* Create the derived linker hash table. We use a derived hash table
+ basically to hold "static" information during an H8/300 coff link
+ without using static variables. */
+
+static struct bfd_link_hash_table *
+h8300_coff_link_hash_table_create (bfd *abfd)
+{
+ struct h8300_coff_link_hash_table *ret;
+ bfd_size_type amt = sizeof (struct h8300_coff_link_hash_table);
+
+ ret = (struct h8300_coff_link_hash_table *) bfd_malloc (amt);
+ if (ret == NULL)
+ return NULL;
+ if (!_bfd_link_hash_table_init (&ret->root.root, abfd,
+ _bfd_generic_link_hash_newfunc,
+ sizeof (struct generic_link_hash_entry)))
+ {
+ free (ret);
+ return NULL;
+ }
+
+ /* Initialize our data. */
+ ret->vectors_sec = NULL;
+ ret->funcvec_hash_table = NULL;
+ /* OK. Everything's initialized, return the base pointer. */
+ return &ret->root.root;
+}
+
+/* Special handling for H8/300 relocs.
+ We only come here for pcrel stuff and return normally if not an -r link.
+ When doing -r, we can't do any arithmetic for the pcrel stuff, because
+ the code in reloc.c assumes that we can manipulate the targets of
+ the pcrel branches. This isn't so, since the H8/300 can do relaxing,
+ which means that the gap after the instruction may not be enough to
+ contain the offset required for the branch, so we have to use only
+ the addend until the final link. */
+
+static bfd_reloc_status_type
+special (bfd *abfd ATTRIBUTE_UNUSED,
+ arelent *reloc_entry ATTRIBUTE_UNUSED,
+ asymbol *symbol ATTRIBUTE_UNUSED,
+ PTR data ATTRIBUTE_UNUSED,
+ asection *input_section ATTRIBUTE_UNUSED,
+ bfd *output_bfd,
+ char **error_message ATTRIBUTE_UNUSED)
+{
+ if (output_bfd == (bfd *) NULL)
+ return bfd_reloc_continue;
+
+ /* Adjust the reloc address to that in the output section. */
+ reloc_entry->address += input_section->output_offset;
+ return bfd_reloc_ok;
+}
+
+static reloc_howto_type howto_table[] = {
+ HOWTO (R_RELBYTE, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "8", FALSE, 0x000000ff, 0x000000ff, FALSE),
+ HOWTO (R_RELWORD, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "16", FALSE, 0x0000ffff, 0x0000ffff, FALSE),
+ HOWTO (R_RELLONG, 0, 2, 32, FALSE, 0, complain_overflow_bitfield, special, "32", FALSE, 0xffffffff, 0xffffffff, FALSE),
+ HOWTO (R_PCRBYTE, 0, 0, 8, TRUE, 0, complain_overflow_signed, special, "DISP8", FALSE, 0x000000ff, 0x000000ff, TRUE),
+ HOWTO (R_PCRWORD, 0, 1, 16, TRUE, 0, complain_overflow_signed, special, "DISP16", FALSE, 0x0000ffff, 0x0000ffff, TRUE),
+ HOWTO (R_PCRLONG, 0, 2, 32, TRUE, 0, complain_overflow_signed, special, "DISP32", FALSE, 0xffffffff, 0xffffffff, TRUE),
+ HOWTO (R_MOV16B1, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "relaxable mov.b:16", FALSE, 0x0000ffff, 0x0000ffff, FALSE),
+ HOWTO (R_MOV16B2, 0, 1, 8, FALSE, 0, complain_overflow_bitfield, special, "relaxed mov.b:16", FALSE, 0x000000ff, 0x000000ff, FALSE),
+ HOWTO (R_JMP1, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "16/pcrel", FALSE, 0x0000ffff, 0x0000ffff, FALSE),
+ HOWTO (R_JMP2, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "pcrecl/16", FALSE, 0x000000ff, 0x000000ff, FALSE),
+ HOWTO (R_JMPL1, 0, 2, 32, FALSE, 0, complain_overflow_bitfield, special, "24/pcrell", FALSE, 0x00ffffff, 0x00ffffff, FALSE),
+ HOWTO (R_JMPL2, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "pc8/24", FALSE, 0x000000ff, 0x000000ff, FALSE),
+ HOWTO (R_MOV24B1, 0, 1, 32, FALSE, 0, complain_overflow_bitfield, special, "relaxable mov.b:24", FALSE, 0xffffffff, 0xffffffff, FALSE),
+ HOWTO (R_MOV24B2, 0, 1, 8, FALSE, 0, complain_overflow_bitfield, special, "relaxed mov.b:24", FALSE, 0x0000ffff, 0x0000ffff, FALSE),
+
+ /* An indirect reference to a function. This causes the function's address
+ to be added to the function vector in lo-mem and puts the address of
+ the function vector's entry in the jsr instruction. */
+ HOWTO (R_MEM_INDIRECT, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "8/indirect", FALSE, 0x000000ff, 0x000000ff, FALSE),
+
+ /* Internal reloc for relaxing. This is created when a 16-bit pc-relative
+ branch is turned into an 8-bit pc-relative branch. */
+ HOWTO (R_PCRWORD_B, 0, 0, 8, TRUE, 0, complain_overflow_bitfield, special, "relaxed bCC:16", FALSE, 0x000000ff, 0x000000ff, FALSE),
+
+ HOWTO (R_MOVL1, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,special, "32/24 relaxable move", FALSE, 0xffffffff, 0xffffffff, FALSE),
+ HOWTO (R_MOVL2, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "32/24 relaxed move", FALSE, 0x0000ffff, 0x0000ffff, FALSE),
-/* Code to swap in the reloc */
-#define SWAP_IN_RELOC_OFFSET bfd_h_get_32
-#define SWAP_OUT_RELOC_OFFSET bfd_h_put_32
+ HOWTO (R_BCC_INV, 0, 0, 8, TRUE, 0, complain_overflow_signed, special, "DISP8 inverted", FALSE, 0x000000ff, 0x000000ff, TRUE),
+
+ HOWTO (R_JMP_DEL, 0, 0, 8, TRUE, 0, complain_overflow_signed, special, "Deleted jump", FALSE, 0x000000ff, 0x000000ff, TRUE),
+};
+
+/* Turn a howto into a reloc number. */
+
+#define SELECT_RELOC(x,howto) \
+ { x.r_type = select_reloc (howto); }
+
+#define BADMAG(x) (H8300BADMAG (x) && H8300HBADMAG (x) && H8300SBADMAG (x) \
+ && H8300HNBADMAG(x) && H8300SNBADMAG(x))
+#define H8300 1 /* Customize coffcode.h */
+#define __A_MAGIC_SET__
+
+/* Code to swap in the reloc. */
+#define SWAP_IN_RELOC_OFFSET H_GET_32
+#define SWAP_OUT_RELOC_OFFSET H_PUT_32
#define SWAP_OUT_RELOC_EXTRA(abfd, src, dst) \
dst->r_stuff[0] = 'S'; \
- dst->r_stuff[1] = 'C';
+ dst->r_stuff[1] = 'C';
-/* Code to turn a r_type into a howto ptr, uses the above howto table
- */
+static int
+select_reloc (reloc_howto_type *howto)
+{
+ return howto->type;
+}
+
+/* Code to turn a r_type into a howto ptr, uses the above howto table. */
-static void
-DEFUN(rtype2howto,(internal, dst),
-arelent *internal AND
-struct internal_reloc *dst)
+static void
+rtype2howto (arelent *internal, struct internal_reloc *dst)
{
- switch (dst->r_type) {
+ switch (dst->r_type)
+ {
case R_RELBYTE:
- internal->howto = howto_table+ 0;
+ internal->howto = howto_table + 0;
break;
case R_RELWORD:
- internal->howto = howto_table+ 1;
- break;
+ internal->howto = howto_table + 1;
+ break;
+ case R_RELLONG:
+ internal->howto = howto_table + 2;
+ break;
case R_PCRBYTE:
- internal->howto = howto_table+3;
+ internal->howto = howto_table + 3;
break;
case R_PCRWORD:
- internal->howto = howto_table+ 4;
+ internal->howto = howto_table + 4;
+ break;
+ case R_PCRLONG:
+ internal->howto = howto_table + 5;
break;
- case R_MOVB1:
+ case R_MOV16B1:
internal->howto = howto_table + 6;
break;
- case R_MOVB2:
+ case R_MOV16B2:
internal->howto = howto_table + 7;
break;
case R_JMP1:
- internal->howto = howto_table +8;
+ internal->howto = howto_table + 8;
break;
-
case R_JMP2:
- internal->howto = howto_table +9;
+ internal->howto = howto_table + 9;
+ break;
+ case R_JMPL1:
+ internal->howto = howto_table + 10;
+ break;
+ case R_JMPL2:
+ internal->howto = howto_table + 11;
+ break;
+ case R_MOV24B1:
+ internal->howto = howto_table + 12;
+ break;
+ case R_MOV24B2:
+ internal->howto = howto_table + 13;
+ break;
+ case R_MEM_INDIRECT:
+ internal->howto = howto_table + 14;
+ break;
+ case R_PCRWORD_B:
+ internal->howto = howto_table + 15;
+ break;
+ case R_MOVL1:
+ internal->howto = howto_table + 16;
+ break;
+ case R_MOVL2:
+ internal->howto = howto_table + 17;
+ break;
+ case R_BCC_INV:
+ internal->howto = howto_table + 18;
+ break;
+ case R_JMP_DEL:
+ internal->howto = howto_table + 19;
break;
-
default:
- abort();
+ abort ();
break;
}
}
-#define RTYPE2HOWTO(internal, relocentry) rtype2howto(internal,relocentry)
-
-
-/* Perform any necessaru magic to the addend in a reloc entry */
+#define RTYPE2HOWTO(internal, relocentry) rtype2howto (internal, relocentry)
+/* Perform any necessary magic to the addend in a reloc entry. */
#define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \
- cache_ptr->addend = ext_reloc.r_offset;
+ cache_ptr->addend = ext_reloc.r_offset;
-
#define RELOC_PROCESSING(relent,reloc,symbols,abfd,section) \
- reloc_processing(relent, reloc, symbols, abfd, section)
-
-static void DEFUN(reloc_processing,(relent,reloc, symbols, abfd, section) ,
- arelent *relent AND
- struct internal_reloc *reloc AND
- asymbol **symbols AND
- bfd *abfd AND
- asection *section)
+ reloc_processing (relent, reloc, symbols, abfd, section)
+
+static void
+reloc_processing (arelent *relent, struct internal_reloc *reloc,
+ asymbol **symbols, bfd *abfd, asection *section)
{
+ relent->address = reloc->r_vaddr;
+ rtype2howto (relent, reloc);
- asymbol *ptr;
- relent->address = reloc->r_vaddr;
- rtype2howto(relent,reloc);
+ if (((int) reloc->r_symndx) > 0)
+ relent->sym_ptr_ptr = symbols + obj_convert (abfd)[reloc->r_symndx];
+ else
+ relent->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
- if (reloc->r_symndx > 0)
- {
-
- relent->sym_ptr_ptr = symbols + obj_convert(abfd)[reloc->r_symndx];
+ relent->addend = reloc->r_offset;
+ relent->address -= section->vma;
+}
- }
- else
- {
- relent->sym_ptr_ptr = &(bfd_abs_symbol);
- }
-
+static bfd_boolean
+h8300_symbol_address_p (bfd *abfd, asection *input_section, bfd_vma address)
+{
+ asymbol **s;
-
- relent->addend = reloc->r_offset;
-
- relent->address-= section->vma;
-/* relent->section = 0;*/
+ s = _bfd_generic_link_get_symbols (abfd);
+ BFD_ASSERT (s != (asymbol **) NULL);
+
+ /* Search all the symbols for one in INPUT_SECTION with
+ address ADDRESS. */
+ while (*s)
+ {
+ asymbol *p = *s;
+
+ if (p->section == input_section
+ && (input_section->output_section->vma
+ + input_section->output_offset
+ + p->value) == address)
+ return TRUE;
+ s++;
+ }
+ return FALSE;
}
-#include "coffcode.h"
+/* If RELOC represents a relaxable instruction/reloc, change it into
+ the relaxed reloc, notify the linker that symbol addresses
+ have changed (bfd_perform_slip) and return how much the current
+ section has shrunk by.
+
+ FIXME: Much of this code has knowledge of the ordering of entries
+ in the howto table. This needs to be fixed. */
+
+static int
+h8300_reloc16_estimate (bfd *abfd, asection *input_section, arelent *reloc,
+ unsigned int shrink, struct bfd_link_info *link_info)
+{
+ bfd_vma value;
+ bfd_vma dot;
+ bfd_vma gap;
+ static asection *last_input_section = NULL;
+ static arelent *last_reloc = NULL;
+
+ /* The address of the thing to be relocated will have moved back by
+ the size of the shrink - but we don't change reloc->address here,
+ since we need it to know where the relocation lives in the source
+ uncooked section. */
+ bfd_vma address = reloc->address - shrink;
+
+ if (input_section != last_input_section)
+ last_reloc = NULL;
+
+ /* Only examine the relocs which might be relaxable. */
+ switch (reloc->howto->type)
+ {
+ /* This is the 16-/24-bit absolute branch which could become an
+ 8-bit pc-relative branch. */
+ case R_JMP1:
+ case R_JMPL1:
+ /* Get the address of the target of this branch. */
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+
+ /* Get the address of the next instruction (not the reloc). */
+ dot = (input_section->output_section->vma
+ + input_section->output_offset + address);
+
+ /* Adjust for R_JMP1 vs R_JMPL1. */
+ dot += (reloc->howto->type == R_JMP1 ? 1 : 2);
+
+ /* Compute the distance from this insn to the branch target. */
+ gap = value - dot;
+
+ /* If the distance is within -128..+128 inclusive, then we can relax
+ this jump. +128 is valid since the target will move two bytes
+ closer if we do relax this branch. */
+ if ((int) gap >= -128 && (int) gap <= 128)
+ {
+ bfd_byte code;
+
+ if (!bfd_get_section_contents (abfd, input_section, & code,
+ reloc->address, 1))
+ break;
+ code = bfd_get_8 (abfd, & code);
+
+ /* It's possible we may be able to eliminate this branch entirely;
+ if the previous instruction is a branch around this instruction,
+ and there's no label at this instruction, then we can reverse
+ the condition on the previous branch and eliminate this jump.
+
+ original: new:
+ bCC lab1 bCC' lab2
+ jmp lab2
+ lab1: lab1:
+
+ This saves 4 bytes instead of two, and should be relatively
+ common.
+
+ Only perform this optimisation for jumps (code 0x5a) not
+ subroutine calls, as otherwise it could transform:
+
+ mov.w r0,r0
+ beq .L1
+ jsr @_bar
+ .L1: rts
+ _bar: rts
+ into:
+ mov.w r0,r0
+ bne _bar
+ rts
+ _bar: rts
+
+ which changes the call (jsr) into a branch (bne). */
+ if (code == 0x5a
+ && gap <= 126
+ && last_reloc
+ && last_reloc->howto->type == R_PCRBYTE)
+ {
+ bfd_vma last_value;
+ last_value = bfd_coff_reloc16_get_value (last_reloc, link_info,
+ input_section) + 1;
+
+ if (last_value == dot + 2
+ && last_reloc->address + 1 == reloc->address
+ && !h8300_symbol_address_p (abfd, input_section, dot - 2))
+ {
+ reloc->howto = howto_table + 19;
+ last_reloc->howto = howto_table + 18;
+ last_reloc->sym_ptr_ptr = reloc->sym_ptr_ptr;
+ last_reloc->addend = reloc->addend;
+ shrink += 4;
+ bfd_perform_slip (abfd, 4, input_section, address);
+ break;
+ }
+ }
+
+ /* Change the reloc type. */
+ reloc->howto = reloc->howto + 1;
+
+ /* This shrinks this section by two bytes. */
+ shrink += 2;
+ bfd_perform_slip (abfd, 2, input_section, address);
+ }
+ break;
+
+ /* This is the 16-bit pc-relative branch which could become an 8-bit
+ pc-relative branch. */
+ case R_PCRWORD:
+ /* Get the address of the target of this branch, add one to the value
+ because the addend field in PCrel jumps is off by -1. */
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section) + 1;
+
+ /* Get the address of the next instruction if we were to relax. */
+ dot = input_section->output_section->vma +
+ input_section->output_offset + address;
+
+ /* Compute the distance from this insn to the branch target. */
+ gap = value - dot;
+ /* If the distance is within -128..+128 inclusive, then we can relax
+ this jump. +128 is valid since the target will move two bytes
+ closer if we do relax this branch. */
+ if ((int) gap >= -128 && (int) gap <= 128)
+ {
+ /* Change the reloc type. */
+ reloc->howto = howto_table + 15;
-#define coff_write_armap bsd_write_armap
+ /* This shrinks this section by two bytes. */
+ shrink += 2;
+ bfd_perform_slip (abfd, 2, input_section, address);
+ }
+ break;
+
+ /* This is a 16-bit absolute address in a mov.b insn, which can
+ become an 8-bit absolute address if it's in the right range. */
+ case R_MOV16B1:
+ /* Get the address of the data referenced by this mov.b insn. */
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+ value = bfd_h8300_pad_address (abfd, value);
+
+ /* If the address is in the top 256 bytes of the address space
+ then we can relax this instruction. */
+ if (value >= 0xffffff00u)
+ {
+ /* Change the reloc type. */
+ reloc->howto = reloc->howto + 1;
+
+ /* This shrinks this section by two bytes. */
+ shrink += 2;
+ bfd_perform_slip (abfd, 2, input_section, address);
+ }
+ break;
+
+ /* Similarly for a 24-bit absolute address in a mov.b. Note that
+ if we can't relax this into an 8-bit absolute, we'll fall through
+ and try to relax it into a 16-bit absolute. */
+ case R_MOV24B1:
+ /* Get the address of the data referenced by this mov.b insn. */
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+ value = bfd_h8300_pad_address (abfd, value);
+
+ if (value >= 0xffffff00u)
+ {
+ /* Change the reloc type. */
+ reloc->howto = reloc->howto + 1;
+
+ /* This shrinks this section by four bytes. */
+ shrink += 4;
+ bfd_perform_slip (abfd, 4, input_section, address);
+
+ /* Done with this reloc. */
+ break;
+ }
+
+ /* FALLTHROUGH and try to turn the 24-/32-bit reloc into a 16-bit
+ reloc. */
-bfd_target h8300coff_vec =
+ /* This is a 24-/32-bit absolute address in a mov insn, which can
+ become an 16-bit absolute address if it's in the right range. */
+ case R_MOVL1:
+ /* Get the address of the data referenced by this mov insn. */
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+ value = bfd_h8300_pad_address (abfd, value);
+
+ /* If the address is a sign-extended 16-bit value then we can
+ relax this instruction. */
+ if (value <= 0x7fff || value >= 0xffff8000u)
+ {
+ /* Change the reloc type. */
+ reloc->howto = howto_table + 17;
+
+ /* This shrinks this section by two bytes. */
+ shrink += 2;
+ bfd_perform_slip (abfd, 2, input_section, address);
+ }
+ break;
+
+ /* No other reloc types represent relaxing opportunities. */
+ default:
+ break;
+ }
+
+ last_reloc = reloc;
+ last_input_section = input_section;
+ return shrink;
+}
+
+/* Handle relocations for the H8/300, including relocs for relaxed
+ instructions.
+
+ FIXME: Not all relocations check for overflow! */
+
+static void
+h8300_reloc16_extra_cases (bfd *abfd, struct bfd_link_info *link_info,
+ struct bfd_link_order *link_order, arelent *reloc,
+ bfd_byte *data, unsigned int *src_ptr,
+ unsigned int *dst_ptr)
{
- "coff-h8300", /* name */
- bfd_target_coff_flavour,
- true, /* data byte order is big */
- true, /* header byte order is big */
-
- (HAS_RELOC | EXEC_P | /* object flags */
- HAS_LINENO | HAS_DEBUG |
- HAS_SYMS | HAS_LOCALS | DYNAMIC | WP_TEXT),
-
- ( SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
- '/', /* ar_pad_char */
- 15, /* ar_max_namelen */
- 1, /* minimum section alignment */
-_do_getb64, _do_putb64, _do_getb32, _do_putb32, _do_getb16, _do_putb16, /* data */
-_do_getb64, _do_putb64, _do_getb32, _do_putb32, _do_getb16, _do_putb16, /* hdrs */
-
- {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
- bfd_generic_archive_p, _bfd_dummy_target},
- {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */
- bfd_false},
- {bfd_false, coff_write_object_contents, /* bfd_write_contents */
- _bfd_write_archive_contents, bfd_false},
-
- JUMP_TABLE(coff),
- COFF_SWAP_TABLE
-};
+ unsigned int src_address = *src_ptr;
+ unsigned int dst_address = *dst_ptr;
+ asection *input_section = link_order->u.indirect.section;
+ bfd_vma value;
+ bfd_vma dot;
+ int gap, tmp;
+ unsigned char temp_code;
+
+ switch (reloc->howto->type)
+ {
+ /* Generic 8-bit pc-relative relocation. */
+ case R_PCRBYTE:
+ /* Get the address of the target of this branch. */
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+
+ dot = (input_section->output_offset
+ + dst_address
+ + link_order->u.indirect.section->output_section->vma);
+
+ gap = value - dot;
+
+ /* Sanity check. */
+ if (gap < -128 || gap > 126)
+ {
+ if (! ((*link_info->callbacks->reloc_overflow)
+ (link_info, NULL,
+ bfd_asymbol_name (*reloc->sym_ptr_ptr),
+ reloc->howto->name, reloc->addend, input_section->owner,
+ input_section, reloc->address)))
+ abort ();
+ }
+
+ /* Everything looks OK. Apply the relocation and update the
+ src/dst address appropriately. */
+ bfd_put_8 (abfd, gap, data + dst_address);
+ dst_address++;
+ src_address++;
+
+ /* All done. */
+ break;
+
+ /* Generic 16-bit pc-relative relocation. */
+ case R_PCRWORD:
+ /* Get the address of the target of this branch. */
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+
+ /* Get the address of the instruction (not the reloc). */
+ dot = (input_section->output_offset
+ + dst_address
+ + link_order->u.indirect.section->output_section->vma + 1);
+
+ gap = value - dot;
+
+ /* Sanity check. */
+ if (gap > 32766 || gap < -32768)
+ {
+ if (! ((*link_info->callbacks->reloc_overflow)
+ (link_info, NULL,
+ bfd_asymbol_name (*reloc->sym_ptr_ptr),
+ reloc->howto->name, reloc->addend, input_section->owner,
+ input_section, reloc->address)))
+ abort ();
+ }
+
+ /* Everything looks OK. Apply the relocation and update the
+ src/dst address appropriately. */
+ bfd_put_16 (abfd, (bfd_vma) gap, data + dst_address);
+ dst_address += 2;
+ src_address += 2;
+
+ /* All done. */
+ break;
+
+ /* Generic 8-bit absolute relocation. */
+ case R_RELBYTE:
+ /* Get the address of the object referenced by this insn. */
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+
+ bfd_put_8 (abfd, value & 0xff, data + dst_address);
+ dst_address += 1;
+ src_address += 1;
+
+ /* All done. */
+ break;
+
+ /* Various simple 16-bit absolute relocations. */
+ case R_MOV16B1:
+ case R_JMP1:
+ case R_RELWORD:
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+ bfd_put_16 (abfd, value, data + dst_address);
+ dst_address += 2;
+ src_address += 2;
+ break;
+
+ /* Various simple 24-/32-bit absolute relocations. */
+ case R_MOV24B1:
+ case R_MOVL1:
+ case R_RELLONG:
+ /* Get the address of the target of this branch. */
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+ bfd_put_32 (abfd, value, data + dst_address);
+ dst_address += 4;
+ src_address += 4;
+ break;
+
+ /* Another 24-/32-bit absolute relocation. */
+ case R_JMPL1:
+ /* Get the address of the target of this branch. */
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+
+ value = ((value & 0x00ffffff)
+ | (bfd_get_32 (abfd, data + src_address) & 0xff000000));
+ bfd_put_32 (abfd, value, data + dst_address);
+ dst_address += 4;
+ src_address += 4;
+ break;
+
+ /* This is a 24-/32-bit absolute address in one of the following
+ instructions:
+
+ "band", "bclr", "biand", "bild", "bior", "bist", "bixor",
+ "bld", "bnot", "bor", "bset", "bst", "btst", "bxor", "ldc.w",
+ "stc.w" and "mov.[bwl]"
+
+ We may relax this into an 16-bit absolute address if it's in
+ the right range. */
+ case R_MOVL2:
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+ value = bfd_h8300_pad_address (abfd, value);
+
+ /* Sanity check. */
+ if (value <= 0x7fff || value >= 0xffff8000u)
+ {
+ /* Insert the 16-bit value into the proper location. */
+ bfd_put_16 (abfd, value, data + dst_address);
+
+ /* Fix the opcode. For all the instructions that belong to
+ this relaxation, we simply need to turn off bit 0x20 in
+ the previous byte. */
+ data[dst_address - 1] &= ~0x20;
+ dst_address += 2;
+ src_address += 4;
+ }
+ else
+ {
+ if (! ((*link_info->callbacks->reloc_overflow)
+ (link_info, NULL,
+ bfd_asymbol_name (*reloc->sym_ptr_ptr),
+ reloc->howto->name, reloc->addend, input_section->owner,
+ input_section, reloc->address)))
+ abort ();
+ }
+ break;
+
+ /* A 16-bit absolute branch that is now an 8-bit pc-relative branch. */
+ case R_JMP2:
+ /* Get the address of the target of this branch. */
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+
+ /* Get the address of the next instruction. */
+ dot = (input_section->output_offset
+ + dst_address
+ + link_order->u.indirect.section->output_section->vma + 1);
+
+ gap = value - dot;
+
+ /* Sanity check. */
+ if (gap < -128 || gap > 126)
+ {
+ if (! ((*link_info->callbacks->reloc_overflow)
+ (link_info, NULL,
+ bfd_asymbol_name (*reloc->sym_ptr_ptr),
+ reloc->howto->name, reloc->addend, input_section->owner,
+ input_section, reloc->address)))
+ abort ();
+ }
+
+ /* Now fix the instruction itself. */
+ switch (data[dst_address - 1])
+ {
+ case 0x5e:
+ /* jsr -> bsr */
+ bfd_put_8 (abfd, 0x55, data + dst_address - 1);
+ break;
+ case 0x5a:
+ /* jmp -> bra */
+ bfd_put_8 (abfd, 0x40, data + dst_address - 1);
+ break;
+
+ default:
+ abort ();
+ }
+
+ /* Write out the 8-bit value. */
+ bfd_put_8 (abfd, gap, data + dst_address);
+
+ dst_address += 1;
+ src_address += 3;
+
+ break;
+
+ /* A 16-bit pc-relative branch that is now an 8-bit pc-relative branch. */
+ case R_PCRWORD_B:
+ /* Get the address of the target of this branch. */
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+
+ /* Get the address of the instruction (not the reloc). */
+ dot = (input_section->output_offset
+ + dst_address
+ + link_order->u.indirect.section->output_section->vma - 1);
+
+ gap = value - dot;
+
+ /* Sanity check. */
+ if (gap < -128 || gap > 126)
+ {
+ if (! ((*link_info->callbacks->reloc_overflow)
+ (link_info, NULL,
+ bfd_asymbol_name (*reloc->sym_ptr_ptr),
+ reloc->howto->name, reloc->addend, input_section->owner,
+ input_section, reloc->address)))
+ abort ();
+ }
+
+ /* Now fix the instruction. */
+ switch (data[dst_address - 2])
+ {
+ case 0x58:
+ /* bCC:16 -> bCC:8 */
+ /* Get the second byte of the original insn, which contains
+ the condition code. */
+ tmp = data[dst_address - 1];
+
+ /* Compute the fisrt byte of the relaxed instruction. The
+ original sequence 0x58 0xX0 is relaxed to 0x4X, where X
+ represents the condition code. */
+ tmp &= 0xf0;
+ tmp >>= 4;
+ tmp |= 0x40;
+
+ /* Write it. */
+ bfd_put_8 (abfd, tmp, data + dst_address - 2);
+ break;
+
+ case 0x5c:
+ /* bsr:16 -> bsr:8 */
+ bfd_put_8 (abfd, 0x55, data + dst_address - 2);
+ break;
+
+ default:
+ abort ();
+ }
+
+ /* Output the target. */
+ bfd_put_8 (abfd, gap, data + dst_address - 1);
+
+ /* We don't advance dst_address -- the 8-bit reloc is applied at
+ dst_address - 1, so the next insn should begin at dst_address. */
+ src_address += 2;
+
+ break;
+
+ /* Similarly for a 24-bit absolute that is now 8 bits. */
+ case R_JMPL2:
+ /* Get the address of the target of this branch. */
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+
+ /* Get the address of the instruction (not the reloc). */
+ dot = (input_section->output_offset
+ + dst_address
+ + link_order->u.indirect.section->output_section->vma + 2);
+
+ gap = value - dot;
+
+ /* Fix the instruction. */
+ switch (data[src_address])
+ {
+ case 0x5e:
+ /* jsr -> bsr */
+ bfd_put_8 (abfd, 0x55, data + dst_address);
+ break;
+ case 0x5a:
+ /* jmp ->bra */
+ bfd_put_8 (abfd, 0x40, data + dst_address);
+ break;
+ default:
+ abort ();
+ }
+
+ bfd_put_8 (abfd, gap, data + dst_address + 1);
+ dst_address += 2;
+ src_address += 4;
+
+ break;
+
+ /* This is a 16-bit absolute address in one of the following
+ instructions:
+
+ "band", "bclr", "biand", "bild", "bior", "bist", "bixor",
+ "bld", "bnot", "bor", "bset", "bst", "btst", "bxor", and
+ "mov.b"
+
+ We may relax this into an 8-bit absolute address if it's in
+ the right range. */
+ case R_MOV16B2:
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+
+ /* All instructions with R_H8_DIR16B2 start with 0x6a. */
+ if (data[dst_address - 2] != 0x6a)
+ abort ();
+
+ temp_code = data[src_address - 1];
+
+ /* If this is a mov.b instruction, clear the lower nibble, which
+ contains the source/destination register number. */
+ if ((temp_code & 0x10) != 0x10)
+ temp_code &= 0xf0;
+
+ /* Fix up the opcode. */
+ switch (temp_code)
+ {
+ case 0x00:
+ /* This is mov.b @aa:16,Rd. */
+ data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x20;
+ break;
+ case 0x80:
+ /* This is mov.b Rs,@aa:16. */
+ data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x30;
+ break;
+ case 0x18:
+ /* This is a bit-maniputation instruction that stores one
+ bit into memory, one of "bclr", "bist", "bnot", "bset",
+ and "bst". */
+ data[dst_address - 2] = 0x7f;
+ break;
+ case 0x10:
+ /* This is a bit-maniputation instruction that loads one bit
+ from memory, one of "band", "biand", "bild", "bior",
+ "bixor", "bld", "bor", "btst", and "bxor". */
+ data[dst_address - 2] = 0x7e;
+ break;
+ default:
+ abort ();
+ }
+
+ bfd_put_8 (abfd, value & 0xff, data + dst_address - 1);
+ src_address += 2;
+ break;
+
+ /* This is a 24-bit absolute address in one of the following
+ instructions:
+
+ "band", "bclr", "biand", "bild", "bior", "bist", "bixor",
+ "bld", "bnot", "bor", "bset", "bst", "btst", "bxor", and
+ "mov.b"
+
+ We may relax this into an 8-bit absolute address if it's in
+ the right range. */
+ case R_MOV24B2:
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+
+ /* All instructions with R_MOV24B2 start with 0x6a. */
+ if (data[dst_address - 2] != 0x6a)
+ abort ();
+
+ temp_code = data[src_address - 1];
+
+ /* If this is a mov.b instruction, clear the lower nibble, which
+ contains the source/destination register number. */
+ if ((temp_code & 0x30) != 0x30)
+ temp_code &= 0xf0;
+
+ /* Fix up the opcode. */
+ switch (temp_code)
+ {
+ case 0x20:
+ /* This is mov.b @aa:24/32,Rd. */
+ data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x20;
+ break;
+ case 0xa0:
+ /* This is mov.b Rs,@aa:24/32. */
+ data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x30;
+ break;
+ case 0x38:
+ /* This is a bit-maniputation instruction that stores one
+ bit into memory, one of "bclr", "bist", "bnot", "bset",
+ and "bst". */
+ data[dst_address - 2] = 0x7f;
+ break;
+ case 0x30:
+ /* This is a bit-maniputation instruction that loads one bit
+ from memory, one of "band", "biand", "bild", "bior",
+ "bixor", "bld", "bor", "btst", and "bxor". */
+ data[dst_address - 2] = 0x7e;
+ break;
+ default:
+ abort ();
+ }
+
+ bfd_put_8 (abfd, value & 0xff, data + dst_address - 1);
+ src_address += 4;
+ break;
+
+ case R_BCC_INV:
+ /* Get the address of the target of this branch. */
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+
+ dot = (input_section->output_offset
+ + dst_address
+ + link_order->u.indirect.section->output_section->vma) + 1;
+
+ gap = value - dot;
+
+ /* Sanity check. */
+ if (gap < -128 || gap > 126)
+ {
+ if (! ((*link_info->callbacks->reloc_overflow)
+ (link_info, NULL,
+ bfd_asymbol_name (*reloc->sym_ptr_ptr),
+ reloc->howto->name, reloc->addend, input_section->owner,
+ input_section, reloc->address)))
+ abort ();
+ }
+
+ /* Everything looks OK. Fix the condition in the instruction, apply
+ the relocation, and update the src/dst address appropriately. */
+
+ bfd_put_8 (abfd, bfd_get_8 (abfd, data + dst_address - 1) ^ 1,
+ data + dst_address - 1);
+ bfd_put_8 (abfd, gap, data + dst_address);
+ dst_address++;
+ src_address++;
+
+ /* All done. */
+ break;
+
+ case R_JMP_DEL:
+ src_address += 4;
+ break;
+
+ /* An 8-bit memory indirect instruction (jmp/jsr).
+
+ There's several things that need to be done to handle
+ this relocation.
+
+ If this is a reloc against the absolute symbol, then
+ we should handle it just R_RELBYTE. Likewise if it's
+ for a symbol with a value ge 0 and le 0xff.
+
+ Otherwise it's a jump/call through the function vector,
+ and the linker is expected to set up the function vector
+ and put the right value into the jump/call instruction. */
+ case R_MEM_INDIRECT:
+ {
+ /* We need to find the symbol so we can determine it's
+ address in the function vector table. */
+ asymbol *symbol;
+ const char *name;
+ struct funcvec_hash_table *ftab;
+ struct funcvec_hash_entry *h;
+ struct h8300_coff_link_hash_table *htab;
+ asection *vectors_sec;
+
+ if (link_info->hash->creator != abfd->xvec)
+ {
+ (*_bfd_error_handler)
+ (_("cannot handle R_MEM_INDIRECT reloc when using %s output"),
+ link_info->hash->creator->name);
+
+ /* What else can we do? This function doesn't allow return
+ of an error, and we don't want to call abort as that
+ indicates an internal error. */
+#ifndef EXIT_FAILURE
+#define EXIT_FAILURE 1
+#endif
+ xexit (EXIT_FAILURE);
+ }
+ htab = h8300_coff_hash_table (link_info);
+ vectors_sec = htab->vectors_sec;
+
+ /* First see if this is a reloc against the absolute symbol
+ or against a symbol with a nonnegative value <= 0xff. */
+ symbol = *(reloc->sym_ptr_ptr);
+ value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+ if (symbol == bfd_abs_section_ptr->symbol
+ || value <= 0xff)
+ {
+ /* This should be handled in a manner very similar to
+ R_RELBYTES. If the value is in range, then just slam
+ the value into the right location. Else trigger a
+ reloc overflow callback. */
+ if (value <= 0xff)
+ {
+ bfd_put_8 (abfd, value, data + dst_address);
+ dst_address += 1;
+ src_address += 1;
+ }
+ else
+ {
+ if (! ((*link_info->callbacks->reloc_overflow)
+ (link_info, NULL,
+ bfd_asymbol_name (*reloc->sym_ptr_ptr),
+ reloc->howto->name, reloc->addend, input_section->owner,
+ input_section, reloc->address)))
+ abort ();
+ }
+ break;
+ }
+
+ /* This is a jump/call through a function vector, and we're
+ expected to create the function vector ourselves.
+
+ First look up this symbol in the linker hash table -- we need
+ the derived linker symbol which holds this symbol's index
+ in the function vector. */
+ name = symbol->name;
+ if (symbol->flags & BSF_LOCAL)
+ {
+ char *new_name = bfd_malloc ((bfd_size_type) strlen (name) + 10);
+
+ if (new_name == NULL)
+ abort ();
+
+ sprintf (new_name, "%s_%08x", name, symbol->section->id);
+ name = new_name;
+ }
+
+ ftab = htab->funcvec_hash_table;
+ h = funcvec_hash_lookup (ftab, name, FALSE, FALSE);
+
+ /* This shouldn't ever happen. If it does that means we've got
+ data corruption of some kind. Aborting seems like a reasonable
+ thing to do here. */
+ if (h == NULL || vectors_sec == NULL)
+ abort ();
+
+ /* Place the address of the function vector entry into the
+ reloc's address. */
+ bfd_put_8 (abfd,
+ vectors_sec->output_offset + h->offset,
+ data + dst_address);
+
+ dst_address++;
+ src_address++;
+
+ /* Now create an entry in the function vector itself. */
+ switch (bfd_get_mach (input_section->owner))
+ {
+ case bfd_mach_h8300:
+ case bfd_mach_h8300hn:
+ case bfd_mach_h8300sn:
+ bfd_put_16 (abfd,
+ bfd_coff_reloc16_get_value (reloc,
+ link_info,
+ input_section),
+ vectors_sec->contents + h->offset);
+ break;
+ case bfd_mach_h8300h:
+ case bfd_mach_h8300s:
+ bfd_put_32 (abfd,
+ bfd_coff_reloc16_get_value (reloc,
+ link_info,
+ input_section),
+ vectors_sec->contents + h->offset);
+ break;
+ default:
+ abort ();
+ }
+
+ /* Gross. We've already written the contents of the vector section
+ before we get here... So we write it again with the new data. */
+ bfd_set_section_contents (vectors_sec->output_section->owner,
+ vectors_sec->output_section,
+ vectors_sec->contents,
+ (file_ptr) vectors_sec->output_offset,
+ vectors_sec->size);
+ break;
+ }
+
+ default:
+ abort ();
+ break;
+
+ }
+
+ *src_ptr = src_address;
+ *dst_ptr = dst_address;
+}
+
+/* Routine for the h8300 linker.
+
+ This routine is necessary to handle the special R_MEM_INDIRECT
+ relocs on the h8300. It's responsible for generating a vectors
+ section and attaching it to an input bfd as well as sizing
+ the vectors section. It also creates our vectors hash table.
+
+ It uses the generic linker routines to actually add the symbols.
+ from this BFD to the bfd linker hash table. It may add a few
+ selected static symbols to the bfd linker hash table. */
+
+static bfd_boolean
+h8300_bfd_link_add_symbols (bfd *abfd, struct bfd_link_info *info)
+{
+ asection *sec;
+ struct funcvec_hash_table *funcvec_hash_table;
+ bfd_size_type amt;
+ struct h8300_coff_link_hash_table *htab;
+
+ /* Add the symbols using the generic code. */
+ _bfd_generic_link_add_symbols (abfd, info);
+
+ if (info->hash->creator != abfd->xvec)
+ return TRUE;
+
+ htab = h8300_coff_hash_table (info);
+
+ /* If we haven't created a vectors section, do so now. */
+ if (!htab->vectors_sec)
+ {
+ flagword flags;
+
+ /* Make sure the appropriate flags are set, including SEC_IN_MEMORY. */
+ flags = (SEC_ALLOC | SEC_LOAD
+ | SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_READONLY);
+ htab->vectors_sec = bfd_make_section_with_flags (abfd, ".vectors",
+ flags);
+
+ /* If the section wasn't created, or we couldn't set the flags,
+ quit quickly now, rather than dying a painful death later. */
+ if (!htab->vectors_sec)
+ return FALSE;
+
+ /* Also create the vector hash table. */
+ amt = sizeof (struct funcvec_hash_table);
+ funcvec_hash_table = (struct funcvec_hash_table *) bfd_alloc (abfd, amt);
+
+ if (!funcvec_hash_table)
+ return FALSE;
+
+ /* And initialize the funcvec hash table. */
+ if (!funcvec_hash_table_init (funcvec_hash_table, abfd,
+ funcvec_hash_newfunc,
+ sizeof (struct funcvec_hash_entry)))
+ {
+ bfd_release (abfd, funcvec_hash_table);
+ return FALSE;
+ }
+
+ /* Store away a pointer to the funcvec hash table. */
+ htab->funcvec_hash_table = funcvec_hash_table;
+ }
+
+ /* Load up the function vector hash table. */
+ funcvec_hash_table = htab->funcvec_hash_table;
+
+ /* Now scan the relocs for all the sections in this bfd; create
+ additional space in the .vectors section as needed. */
+ for (sec = abfd->sections; sec; sec = sec->next)
+ {
+ long reloc_size, reloc_count, i;
+ asymbol **symbols;
+ arelent **relocs;
+
+ /* Suck in the relocs, symbols & canonicalize them. */
+ reloc_size = bfd_get_reloc_upper_bound (abfd, sec);
+ if (reloc_size <= 0)
+ continue;
+
+ relocs = (arelent **) bfd_malloc ((bfd_size_type) reloc_size);
+ if (!relocs)
+ return FALSE;
+
+ /* The symbols should have been read in by _bfd_generic link_add_symbols
+ call abovec, so we can cheat and use the pointer to them that was
+ saved in the above call. */
+ symbols = _bfd_generic_link_get_symbols(abfd);
+ reloc_count = bfd_canonicalize_reloc (abfd, sec, relocs, symbols);
+ if (reloc_count <= 0)
+ {
+ free (relocs);
+ continue;
+ }
+
+ /* Now walk through all the relocations in this section. */
+ for (i = 0; i < reloc_count; i++)
+ {
+ arelent *reloc = relocs[i];
+ asymbol *symbol = *(reloc->sym_ptr_ptr);
+ const char *name;
+
+ /* We've got an indirect reloc. See if we need to add it
+ to the function vector table. At this point, we have
+ to add a new entry for each unique symbol referenced
+ by an R_MEM_INDIRECT relocation except for a reloc
+ against the absolute section symbol. */
+ if (reloc->howto->type == R_MEM_INDIRECT
+ && symbol != bfd_abs_section_ptr->symbol)
+
+ {
+ struct funcvec_hash_table *ftab;
+ struct funcvec_hash_entry *h;
+
+ name = symbol->name;
+ if (symbol->flags & BSF_LOCAL)
+ {
+ char *new_name;
+
+ new_name = bfd_malloc ((bfd_size_type) strlen (name) + 10);
+ if (new_name == NULL)
+ abort ();
+
+ sprintf (new_name, "%s_%08x", name, symbol->section->id);
+ name = new_name;
+ }
+
+ /* Look this symbol up in the function vector hash table. */
+ ftab = htab->funcvec_hash_table;
+ h = funcvec_hash_lookup (ftab, name, FALSE, FALSE);
+
+ /* If this symbol isn't already in the hash table, add
+ it and bump up the size of the hash table. */
+ if (h == NULL)
+ {
+ h = funcvec_hash_lookup (ftab, name, TRUE, TRUE);
+ if (h == NULL)
+ {
+ free (relocs);
+ return FALSE;
+ }
+
+ /* Bump the size of the vectors section. Each vector
+ takes 2 bytes on the h8300 and 4 bytes on the h8300h. */
+ switch (bfd_get_mach (abfd))
+ {
+ case bfd_mach_h8300:
+ case bfd_mach_h8300hn:
+ case bfd_mach_h8300sn:
+ htab->vectors_sec->size += 2;
+ break;
+ case bfd_mach_h8300h:
+ case bfd_mach_h8300s:
+ htab->vectors_sec->size += 4;
+ break;
+ default:
+ abort ();
+ }
+ }
+ }
+ }
+
+ /* We're done with the relocations, release them. */
+ free (relocs);
+ }
+
+ /* Now actually allocate some space for the function vector. It's
+ wasteful to do this more than once, but this is easier. */
+ sec = htab->vectors_sec;
+ if (sec->size != 0)
+ {
+ /* Free the old contents. */
+ if (sec->contents)
+ free (sec->contents);
+
+ /* Allocate new contents. */
+ sec->contents = bfd_malloc (sec->size);
+ }
+
+ return TRUE;
+}
+
+#define coff_reloc16_extra_cases h8300_reloc16_extra_cases
+#define coff_reloc16_estimate h8300_reloc16_estimate
+#define coff_bfd_link_add_symbols h8300_bfd_link_add_symbols
+#define coff_bfd_link_hash_table_create h8300_coff_link_hash_table_create
+
+#define COFF_LONG_FILENAMES
+#include "coffcode.h"
+
+#undef coff_bfd_get_relocated_section_contents
+#undef coff_bfd_relax_section
+#define coff_bfd_get_relocated_section_contents \
+ bfd_coff_reloc16_get_relocated_section_contents
+#define coff_bfd_relax_section bfd_coff_reloc16_relax_section
+
+CREATE_BIG_COFF_TARGET_VEC (h8300coff_vec, "coff-h8300", BFD_IS_RELAXABLE, 0, '_', NULL, COFF_SWAP_TABLE)
projects / deliverable / binutils-gdb.git / blobdiff