#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12
+# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
+ac_help="$ac_help
+ --enable-shared[=PKGS] build shared libraries [default=no]"
+ac_help="$ac_help
+ --enable-static[=PKGS] build static libraries [default=yes]"
+ac_help="$ac_help
+ --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
- --enable-shared build shared libraries [default=yes]"
+ --disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
- --enable-static build static libraries [default=yes]"
+ --with-pic try to use only PIC/non-PIC objects [default=use both]"
ac_help="$ac_help
--enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)"
ac_help="$ac_help
--enable-commonbfdlib build shared BFD/opcodes/libiberty library"
ac_help="$ac_help
--with-mmap try using mmap for BFD input files if available"
+ac_help="$ac_help
+ --enable-build-warnings Enable build-time compiler warnings if gcc is used"
ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
+ac_help="$ac_help
+ --disable-nls do not use Native Language Support"
+ac_help="$ac_help
+ --with-included-gettext use the GNU gettext library included here"
# Initialize some variables set by options.
# The variables have the same names as the options, with
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12"
+ echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
+ac_exeext=
+ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
ac_n= ac_c='\c' ac_t=
fi
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:554: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 559 "configure"
+#include "confdefs.h"
+
+int main() {
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:570: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_cygwin=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:587: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 592 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:599: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_mingw32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
ac_aux_dir=
# Make sure we can run config.sub.
-if $ac_config_sub sun4 >/dev/null 2>&1; then :
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:587: checking host system type" >&5
+echo "configure:664: checking host system type" >&5
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
- if host_alias=`$ac_config_guess`; then :
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
-host=`$ac_config_sub $host_alias`
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:608: checking target system type" >&5
+echo "configure:685: checking target system type" >&5
target_alias=$target
case "$target_alias" in
esac ;;
esac
-target=`$ac_config_sub $target_alias`
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:626: checking build system type" >&5
+echo "configure:703: checking build system type" >&5
build_alias=$build
case "$build_alias" in
esac ;;
esac
-build=`$ac_config_sub $build_alias`
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:651: checking for $ac_word" >&5
+echo "configure:728: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="gcc"
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:680: checking for $ac_word" >&5
+echo "configure:758: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_prog_rejected=no
- for ac_dir in $PATH; do
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
echo "$ac_t""no" 1>&6
fi
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:809: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:728: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:841: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
-cat > conftest.$ac_ext <<EOF
-#line 738 "configure"
+cat > conftest.$ac_ext << EOF
+
+#line 852 "configure"
#include "confdefs.h"
+
main(){return(0);}
EOF
-if { (eval echo configure:742: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:857: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
ac_cv_prog_cc_works=no
fi
rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:762: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:883: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:767: checking whether we are using GNU C" >&5
+echo "configure:888: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:776: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:897: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:791: checking whether ${CC-cc} accepts -g" >&5
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:916: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
- CFLAGS="-O2"
+ CFLAGS="-g"
fi
else
- GCC=
- test "${CFLAGS+set}" = set || CFLAGS="-g"
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
fi
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:819: checking for POSIXized ISC" >&5
+echo "configure:948: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:851: checking for a BSD compatible install" >&5
+echo "configure:981: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
/|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
- for ac_prog in ginstall installbsd scoinst install; do
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
if test -f $ac_dir/$ac_prog; then
if test $ac_prog = install &&
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
- # OSF/1 installbsd also uses dspmsg, but is usable.
:
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-PACKAGE=bfd
-
-VERSION=2.8.2
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
- { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:920: checking whether build environment is sane" >&5
+echo "configure:1034: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
# directory).
if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
- if test "" = "X"; then
+ if test "$*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
+ if test "$*" != "X $srcdir/configure conftestfile" \
+ && test "$*" != "X conftestfile $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" 1>&2; exit 1; }
+ fi
+
test "$2" = conftestfile
)
then
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:1091: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftestmake <<\EOF
+all:
+ @echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SET_MAKE=
+else
+ echo "$ac_t""no" 1>&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+PACKAGE=bfd
+
+VERSION=2.10.91
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
+cat >> confdefs.h <<EOF
+#define PACKAGE "$PACKAGE"
+EOF
+
+cat >> confdefs.h <<EOF
+#define VERSION "$VERSION"
+EOF
+
+
+
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:967: checking for working aclocal" >&5
+echo "configure:1137: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:980: checking for working autoconf" >&5
+echo "configure:1150: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:993: checking for working automake" >&5
+echo "configure:1163: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1006: checking for working autoheader" >&5
+echo "configure:1176: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1019: checking for working makeinfo" >&5
+echo "configure:1189: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
echo "$ac_t""missing" 1>&6
fi
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1032: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+
+
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
+fi
+
+# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1212: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftestmake <<\EOF
-all:
- @echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
else
- eval ac_cv_prog_make_${ac_make}_set=no
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
fi
-rm -f conftestmake
fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- SET_MAKE=
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+ echo "$ac_t""$AR" 1>&6
else
echo "$ac_t""no" 1>&6
- SET_MAKE="MAKE=${MAKE-make}"
fi
-
-# AM_PROG_LD - find the path to the GNU or non-GNU linker
-
-
-
-
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1069: checking for $ac_word" >&5
+echo "configure:1244: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="ranlib"
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
echo "$ac_t""no" 1>&6
fi
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
- withval="$with_gnu_ld"
- test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-if test "$with_gnu_ld" = yes; then
- echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1105: checking for GNU ld" >&5
-else
- echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1108: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1276: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- case "$LD" in
- /*)
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/ld"; then
- ac_cv_path_LD="$ac_dir/ld"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
- test "$with_gnu_ld" = yes && break
- else
- test "$with_gnu_ld" != yes && break
- fi
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
fi
done
IFS="$ac_save_ifs"
- ;;
-esac
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
-
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
- echo "$ac_t""$LD" 1>&6
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking whether we are using GNU ld""... $ac_c" 1>&6
-echo "configure:1147: checking whether we are using GNU ld" >&5
+else
+ RANLIB=":"
+fi
+fi
+
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_shared=no
+fi
+
+
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+ enableval="$enable_static"
+ p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_static=yes
+fi
+
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+ enableval="$enable_fast_install"
+ p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_fast_install=yes
+fi
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$ac_cv_prog_gcc" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
+echo "configure:1391: checking for ld used by GCC" >&5
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case "$ac_prog" in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
+echo "configure:1421: checking for GNU ld" >&5
+else
+ echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+echo "configure:1424: checking for non-GNU ld" >&5
+fi
+if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ ac_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ ac_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$ac_cv_path_LD"
+if test -n "$LD"; then
+ echo "$ac_t""$LD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
+echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
+echo "configure:1459: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi
echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
+with_gnu_ld=$ac_cv_prog_gnu_ld
+
+
+echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+echo "configure:1476: checking for $LD option to reload object files" >&5
+if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+
+echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
+echo "configure:1488: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ ac_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+ ac_cv_path_NM="$tmp_nm -B"
+ break
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$tmp_nm -p"
+ break
+ else
+ ac_cv_path_NM=${ac_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+fi
+fi
+NM="$ac_cv_path_NM"
+echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1163: checking whether ln -s works" >&5
+echo "configure:1526: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+echo "configure:1547: checking how to recognise dependant libraries" >&5
+if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case "$host_os" in
+aix4*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+bsdi4*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+cygwin* | mingw* |pw32*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+freebsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case "$host_cpu" in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-# Always use our own libtool.
-LIBTOOL='$(top_builddir)/libtool'
-
+hpux10.20*)
+ # TODO: Does this work for hpux-11 too?
+ lt_cv_deplibs_check_method='file_magic (s0-90-90-9|PA-RISC0-9.0-9) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
- test "$enableval" = no && libtool_shared=" --disable-shared"
-else
- libtool_shared=--disable-shared
-fi
+irix5* | irix6*)
+ case "$host_os" in
+ irix5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case "$LD" in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+# This must be Linux ELF.
+linux-gnu*)
+ case "$host_cpu" in
+ alpha* | i*86 | powerpc* | sparc* | ia64* )
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
- enableval="$enable_static"
- test "$enableval" = no && libtool_static=" --disable-static"
-else
- libtool_static=
-fi
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then :
+ else
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ fi
+ ;;
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-libtool_flags="$libtool_shared$libtool_static"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$host" in
-*-*-irix6*)
- for f in '-32' '-64' '-cckr' '-n32' '-mips1' '-mips2' '-mips3' '-mips4'; do
- if echo " $CC $CFLAGS " | egrep -e "[ ]$f[ ]" > /dev/null; then
- LD="${LD-ld} $f"
- fi
- done
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
;;
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- CFLAGS="$CFLAGS -belf"
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case "$host_vendor" in
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ esac
;;
esac
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" RANLIB="$RANLIB" LN_S="$LN_S" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+fi
+echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
-# Check whether --enable-64-bit-bfd or --disable-64-bit-bfd was given.
-if test "${enable_64_bit_bfd+set}" = set; then
- enableval="$enable_64_bit_bfd"
- case "${enableval}" in
- yes) want64=true ;;
- no) want64=false ;;
- *) { echo "configure: error: bad value ${enableval} for 64-bit-bfd option" 1>&2; exit 1; } ;;
-esac
+echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+echo "configure:1690: checking for object suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- want64=false
-fi
-# Check whether --enable-targets or --disable-targets was given.
-if test "${enable_targets+set}" = set; then
- enableval="$enable_targets"
- case "${enableval}" in
- yes | "") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; }
- ;;
- no) enable_targets= ;;
- *) enable_targets=$enableval ;;
-esac
-fi
-# Check whether --enable-commonbfdlib or --disable-commonbfdlib was given.
-if test "${enable_commonbfdlib+set}" = set; then
- enableval="$enable_commonbfdlib"
- case "${enableval}" in
- yes) commonbfdlib=true ;;
- no) commonbfdlib=false ;;
- *) { echo "configure: error: bad value ${enableval} for BFD commonbfdlib option" 1>&2; exit 1; } ;;
-esac
-fi
-# Check whether --with-mmap or --without-mmap was given.
-if test "${with_mmap+set}" = set; then
- withval="$with_mmap"
- case "${withval}" in
- yes) want_mmap=true ;;
- no) want_mmap=false ;;
- *) { echo "configure: error: bad value ${withval} for BFD with-mmap option" 1>&2; exit 1; } ;;
-esac
+ rm -f conftest*
+echo 'int i = 1;' > conftest.$ac_ext
+if { (eval echo configure:1696: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ for ac_file in conftest.*; do
+ case $ac_file in
+ *.c) ;;
+ *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+ esac
+ done
else
- want_mmap=false
+ { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
+fi
+rm -f conftest*
fi
+echo "$ac_t""$ac_cv_objext" 1>&6
+OBJEXT=$ac_cv_objext
+ac_objext=$ac_cv_objext
-
-if test -z "$target" ; then
- { echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; }
-fi
-if test "$program_transform_name" = s,x,x,; then
- program_transform_name=
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1716: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- # Double any \ or $. echo might interpret backslashes.
- cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
- rm -f conftestsed
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:1726: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
fi
-test "$program_prefix" != NONE &&
- program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# Only perform the check for file, if the check method requires it
+case "$deplibs_check_method" in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+echo "configure:1753: checking for ${ac_tool_prefix}file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$MAGIC_CMD" in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case "$deplibs_check_method" in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1311: checking whether to enable maintainer-specific portions of Makefiles" >&5
- # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
- enableval="$enable_maintainer_mode"
- USE_MAINTAINER_MODE=$enableval
-else
- USE_MAINTAINER_MODE=no
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
fi
- echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
- if test $USE_MAINTAINER_MODE = yes; then
- MAINT=
- else
- MAINT='#M#'
- fi
-
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
-echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6
-echo "configure:1329: checking for Cygwin32 environment" >&5
-if eval "test \"`echo '$''{'am_cv_cygwin32'+set}'`\" = set"; then
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ echo $ac_n "checking for file""... $ac_c" 1>&6
+echo "configure:1815: checking for file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftest.$ac_ext <<EOF
-#line 1334 "configure"
-#include "confdefs.h"
+ case "$MAGIC_CMD" in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case "$deplibs_check_method" in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
-int main() {
-int main () { return __CYGWIN32__; }
-; return 0; }
EOF
-if { (eval echo configure:1341: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- am_cv_cygwin32=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- am_cv_cygwin32=no
-fi
-rm -f conftest*
-rm -f conftest*
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
fi
-echo "$ac_t""$am_cv_cygwin32" 1>&6
-CYGWIN32=
-test "$am_cv_cygwin32" = yes && CYGWIN32=yes
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1358: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$CYGWIN32" = yes; then
-am_cv_exeext=.exe
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
else
-cat > am_c_test.c << 'EOF'
-int main() {
-/* Nothing needed here */
-}
-EOF
-${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
-am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//`
-rm -f am_c_test*
+ echo "$ac_t""no" 1>&6
fi
-test x"${am_cv_exeext}" = x && am_cv_exeext=no
+ else
+ MAGIC_CMD=:
+ fi
fi
-EXEEXT=""
-test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
-echo "$ac_t""${am_cv_exeext}" 1>&6
-
-host64=false
-target64=false
-
-# host stuff:
+ fi
+ ;;
+esac
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1390: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+echo "configure:1886: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="gcc"
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1419: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+echo "configure:1918: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- ac_prog_rejected=no
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
+ ac_cv_prog_RANLIB="ranlib"
break
fi
done
IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# -gt 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- set dummy "$ac_dir/$ac_word" "$@"
- shift
- ac_cv_prog_CC="$@"
- fi
-fi
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1467: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 1477 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:1481: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1501: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1506: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.c <<EOF
-#ifdef __GNUC__
- yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1515: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
- ac_cv_prog_gcc=yes
-else
- ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
- GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1530: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
-else
- ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-O2"
- fi
else
- GCC=
- test "${CFLAGS+set}" = set || CFLAGS="-g"
+ RANLIB=":"
fi
-
-
-# Permit host specific settings.
-. ${srcdir}/configure.host
-
-
-if test $host != $build; then
- ac_tool_prefix=${host_alias}-
-else
- ac_tool_prefix=
fi
-# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
+# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1571: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+echo "configure:1953: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AR="${ac_tool_prefix}ar"
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
fi
fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
- echo "$ac_t""$AR" 1>&6
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+if test -z "$ac_cv_prog_STRIP"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1602: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+echo "configure:1985: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ ac_cv_prog_STRIP="strip"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
fi
fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1633: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+ STRIP=":"
fi
fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
-else
- echo "$ac_t""no" 1>&6
+
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
fi
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+ withval="$with_pic"
+ pic_mode="$withval"
else
- RANLIB=":"
-fi
+ pic_mode=default
fi
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1675: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- # Account for people who put trailing slashes in PATH elements.
- case "$ac_dir/" in
- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- for ac_prog in ginstall installbsd scoinst install; do
- if test -f $ac_dir/$ac_prog; then
- if test $ac_prog = install &&
- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- # OSF/1 installbsd also uses dspmsg, but is usable.
- :
- else
- ac_cv_path_install="$ac_dir/$ac_prog -c"
- break 2
- fi
- fi
- done
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$host" in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line 2052 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2053: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
;;
esac
- done
- IFS="$ac_save_IFS"
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
+echo "configure:2074: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ cat > conftest.$ac_ext <<EOF
+#line 2087 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:2094: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=no
+fi
+rm -f conftest*
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL="$ac_cv_path_install"
+
+echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+
+esac
+
+
+# Save cache, so that ltconfig can load it
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL="$ac_install_sh"
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
+|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+
+# Reload cache, that may have been modified by ltconfig
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
+else
+ echo "creating cache $cache_file"
+ > $cache_file
+fi
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+
+
+
+
+
+
+
+
+# Check whether --enable-64-bit-bfd or --disable-64-bit-bfd was given.
+if test "${enable_64_bit_bfd+set}" = set; then
+ enableval="$enable_64_bit_bfd"
+ case "${enableval}" in
+ yes) want64=true ;;
+ no) want64=false ;;
+ *) { echo "configure: error: bad value ${enableval} for 64-bit-bfd option" 1>&2; exit 1; } ;;
+esac
+else
+ want64=false
+fi
+# Check whether --enable-targets or --disable-targets was given.
+if test "${enable_targets+set}" = set; then
+ enableval="$enable_targets"
+ case "${enableval}" in
+ yes | "") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; }
+ ;;
+ no) enable_targets= ;;
+ *) enable_targets=$enableval ;;
+esac
+fi
+# Check whether --enable-commonbfdlib or --disable-commonbfdlib was given.
+if test "${enable_commonbfdlib+set}" = set; then
+ enableval="$enable_commonbfdlib"
+ case "${enableval}" in
+ yes) commonbfdlib=true ;;
+ no) commonbfdlib=false ;;
+ *) { echo "configure: error: bad value ${enableval} for BFD commonbfdlib option" 1>&2; exit 1; } ;;
+esac
+fi
+# Check whether --with-mmap or --without-mmap was given.
+if test "${with_mmap+set}" = set; then
+ withval="$with_mmap"
+ case "${withval}" in
+ yes) want_mmap=true ;;
+ no) want_mmap=false ;;
+ *) { echo "configure: error: bad value ${withval} for BFD with-mmap option" 1>&2; exit 1; } ;;
+esac
+else
+ want_mmap=false
+fi
+
+build_warnings="-W -Wall"
+# Check whether --enable-build-warnings or --disable-build-warnings was given.
+if test "${enable_build_warnings+set}" = set; then
+ enableval="$enable_build_warnings"
+ case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting warning flags = $build_warnings" 6>&1
+fi
+fi
+WARN_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then
+ WARN_CFLAGS="${build_warnings}"
+fi
+
+
+
+
+
+
+if test -z "$target" ; then
+ { echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; }
+fi
+if test "$program_transform_name" = s,x,x,; then
+ program_transform_name=
+else
+ # Double any \ or $. echo might interpret backslashes.
+ cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+ program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+ rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:2304: checking whether to enable maintainer-specific portions of Makefiles" >&5
+ # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+ enableval="$enable_maintainer_mode"
+ USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+
+ echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
+
+
+if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:2329: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:2339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+
+host64=false
+target64=false
+
+# host stuff:
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2368: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2398: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2449: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:2481: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext << EOF
+
+#line 2492 "configure"
+#include "confdefs.h"
+
+main(){return(0);}
+EOF
+if { (eval echo configure:2497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cc_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cc_cross=no
+ else
+ ac_cv_prog_cc_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:2523: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:2528: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2537: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:2556: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+
+
+ALL_LINGUAS=
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:2590: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 2605 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2611: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 2622 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2628: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -nologo -E"
+ cat > conftest.$ac_ext <<EOF
+#line 2639 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2645: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2672: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+echo "configure:2700: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2705 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2713: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ ac_cv_header_stdc=yes
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 2730 "configure"
+#include "confdefs.h"
+#include <string.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "memchr" >/dev/null 2>&1; then
+ :
+else
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 2748 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "free" >/dev/null 2>&1; then
+ :
+else
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+if test "$cross_compiling" = yes; then
+ :
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2769 "configure"
+#include "confdefs.h"
+#include <ctype.h>
+#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int main () { int i; for (i = 0; i < 256; i++)
+if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+exit (0); }
+
+EOF
+if { (eval echo configure:2780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_header_stdc=no
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_header_stdc" 1>&6
+if test $ac_cv_header_stdc = yes; then
+ cat >> confdefs.h <<\EOF
+#define STDC_HEADERS 1
+EOF
+
+fi
+
+echo $ac_n "checking for working const""... $ac_c" 1>&6
+echo "configure:2804: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2809 "configure"
+#include "confdefs.h"
+
+int main() {
+
+/* Ultrix mips cc rejects this. */
+typedef int charset[2]; const charset x;
+/* SunOS 4.1.1 cc rejects this. */
+char const *const *ccp;
+char **p;
+/* NEC SVR4.0.2 mips cc rejects this. */
+struct point {int x, y;};
+static struct point const zero = {0,0};
+/* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in an arm
+ of an if-expression whose if-part is not a constant expression */
+const char *g = "string";
+ccp = &g + (g ? g-g : 0);
+/* HPUX 7.0 cc rejects these. */
+++ccp;
+p = (char**) ccp;
+ccp = (char const *const *) p;
+{ /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+}
+{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+}
+{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+}
+{ /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+}
+{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+}
+
+; return 0; }
+EOF
+if { (eval echo configure:2858: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_const=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c_const=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_const" 1>&6
+if test $ac_cv_c_const = no; then
+ cat >> confdefs.h <<\EOF
+#define const
+EOF
+
+fi
+
+echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:2879: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat > conftest.$ac_ext <<EOF
+#line 2886 "configure"
+#include "confdefs.h"
+
+int main() {
+} $ac_kw foo() {
+; return 0; }
+EOF
+if { (eval echo configure:2893: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_inline=$ac_kw; break
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+
+fi
+
+echo "$ac_t""$ac_cv_c_inline" 1>&6
+case "$ac_cv_c_inline" in
+ inline | yes) ;;
+ no) cat >> confdefs.h <<\EOF
+#define inline
+EOF
+ ;;
+ *) cat >> confdefs.h <<EOF
+#define inline $ac_cv_c_inline
+EOF
+ ;;
+esac
+
+echo $ac_n "checking for off_t""... $ac_c" 1>&6
+echo "configure:2919: checking for off_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2924 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_off_t=yes
+else
+ rm -rf conftest*
+ ac_cv_type_off_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_off_t" 1>&6
+if test $ac_cv_type_off_t = no; then
+ cat >> confdefs.h <<\EOF
+#define off_t long
+EOF
+
+fi
+
+echo $ac_n "checking for size_t""... $ac_c" 1>&6
+echo "configure:2952: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2957 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_size_t=yes
+else
+ rm -rf conftest*
+ ac_cv_type_size_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+ cat >> confdefs.h <<\EOF
+#define size_t unsigned
+EOF
+
+fi
+
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments. Useless!
+echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
+echo "configure:2987: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2992 "configure"
+#include "confdefs.h"
+#include <alloca.h>
+int main() {
+char *p = alloca(2 * sizeof(int));
+; return 0; }
+EOF
+if { (eval echo configure:2999: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_header_alloca_h=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_header_alloca_h=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
+if test $ac_cv_header_alloca_h = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA_H 1
+EOF
+
+fi
+
+echo $ac_n "checking for alloca""... $ac_c" 1>&6
+echo "configure:3020: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3025 "configure"
+#include "confdefs.h"
+
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+#else
+# ifdef _MSC_VER
+# include <malloc.h>
+# define alloca _alloca
+# else
+# if HAVE_ALLOCA_H
+# include <alloca.h>
+# else
+# ifdef _AIX
+ #pragma alloca
+# else
+# ifndef alloca /* predefined by HP cc +Olibcalls */
+char *alloca ();
+# endif
+# endif
+# endif
+# endif
+#endif
+
+int main() {
+char *p = (char *) alloca(1);
+; return 0; }
+EOF
+if { (eval echo configure:3053: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_func_alloca_works=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_func_alloca_works=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
+if test $ac_cv_func_alloca_works = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA 1
+EOF
+
+fi
+
+if test $ac_cv_func_alloca_works = no; then
+ # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+ # that cause trouble. Some versions do not even contain alloca or
+ # contain a buggy version. If you still want to use their alloca,
+ # use ar to extract alloca.o from them instead of compiling alloca.c.
+ ALLOCA=alloca.${ac_objext}
+ cat >> confdefs.h <<\EOF
+#define C_ALLOCA 1
+EOF
+
+
+echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
+echo "configure:3085: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3090 "configure"
+#include "confdefs.h"
+#if defined(CRAY) && ! defined(CRAY2)
+webecray
+#else
+wenotbecray
+#endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "webecray" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_os_cray=yes
+else
+ rm -rf conftest*
+ ac_cv_os_cray=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_os_cray" 1>&6
+if test $ac_cv_os_cray = yes; then
+for ac_func in _getb67 GETB67 getb67; do
+ echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3115: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3120 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3143: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ cat >> confdefs.h <<EOF
+#define CRAY_STACKSEG_END $ac_func
+EOF
+
+ break
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+done
+fi
+
+echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
+echo "configure:3170: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_c_stack_direction=0
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3178 "configure"
+#include "confdefs.h"
+find_stack_direction ()
+{
+ static char *addr = 0;
+ auto char dummy;
+ if (addr == 0)
+ {
+ addr = &dummy;
+ return find_stack_direction ();
+ }
+ else
+ return (&dummy > addr) ? 1 : -1;
+}
+main ()
+{
+ exit (find_stack_direction() < 0);
+}
+EOF
+if { (eval echo configure:3197: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_c_stack_direction=1
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_c_stack_direction=-1
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
+cat >> confdefs.h <<EOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+EOF
+
+fi
+
+for ac_hdr in unistd.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:3222: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3227 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3232: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_func in getpagesize
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3261: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3266 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3289: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+echo $ac_n "checking for working mmap""... $ac_c" 1>&6
+echo "configure:3314: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_func_mmap_fixed_mapped=no
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3322 "configure"
+#include "confdefs.h"
+
+/* Thanks to Mike Haertel and Jim Avera for this test.
+ Here is a matrix of mmap possibilities:
+ mmap private not fixed
+ mmap private fixed at somewhere currently unmapped
+ mmap private fixed at somewhere already mapped
+ mmap shared not fixed
+ mmap shared fixed at somewhere currently unmapped
+ mmap shared fixed at somewhere already mapped
+ For private mappings, we should verify that changes cannot be read()
+ back from the file, nor mmap's back from the file at a different
+ address. (There have been systems where private was not correctly
+ implemented like the infamous i386 svr4.0, and systems where the
+ VM page cache was not coherent with the filesystem buffer cache
+ like early versions of FreeBSD and possibly contemporary NetBSD.)
+ For shared mappings, we should conversely verify that changes get
+ propogated back to all the places they're supposed to be.
+
+ Grep wants private fixed already mapped.
+ The main things grep needs to know about mmap are:
+ * does it exist and is it safe to write into the mmap'd area
+ * how to use it (BSD variants) */
+#include <sys/types.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+
+/* This mess was copied from the GNU getpagesize.h. */
+#ifndef HAVE_GETPAGESIZE
+# ifdef HAVE_UNISTD_H
+# include <unistd.h>
+# endif
+
+/* Assume that all systems that can run configure have sys/param.h. */
+# ifndef HAVE_SYS_PARAM_H
+# define HAVE_SYS_PARAM_H 1
+# endif
+
+# ifdef _SC_PAGESIZE
+# define getpagesize() sysconf(_SC_PAGESIZE)
+# else /* no _SC_PAGESIZE */
+# ifdef HAVE_SYS_PARAM_H
+# include <sys/param.h>
+# ifdef EXEC_PAGESIZE
+# define getpagesize() EXEC_PAGESIZE
+# else /* no EXEC_PAGESIZE */
+# ifdef NBPG
+# define getpagesize() NBPG * CLSIZE
+# ifndef CLSIZE
+# define CLSIZE 1
+# endif /* no CLSIZE */
+# else /* no NBPG */
+# ifdef NBPC
+# define getpagesize() NBPC
+# else /* no NBPC */
+# ifdef PAGESIZE
+# define getpagesize() PAGESIZE
+# endif /* PAGESIZE */
+# endif /* no NBPC */
+# endif /* no NBPG */
+# endif /* no EXEC_PAGESIZE */
+# else /* no HAVE_SYS_PARAM_H */
+# define getpagesize() 8192 /* punt totally */
+# endif /* no HAVE_SYS_PARAM_H */
+# endif /* no _SC_PAGESIZE */
+
+#endif /* no HAVE_GETPAGESIZE */
+
+#ifdef __cplusplus
+extern "C" { void *malloc(unsigned); }
+#else
+char *malloc();
+#endif
+
+int
+main()
+{
+ char *data, *data2, *data3;
+ int i, pagesize;
+ int fd;
+
+ pagesize = getpagesize();
+
+ /*
+ * First, make a file with some known garbage in it.
+ */
+ data = malloc(pagesize);
+ if (!data)
+ exit(1);
+ for (i = 0; i < pagesize; ++i)
+ *(data + i) = rand();
+ umask(0);
+ fd = creat("conftestmmap", 0600);
+ if (fd < 0)
+ exit(1);
+ if (write(fd, data, pagesize) != pagesize)
+ exit(1);
+ close(fd);
+
+ /*
+ * Next, try to mmap the file at a fixed address which
+ * already has something else allocated at it. If we can,
+ * also make sure that we see the same garbage.
+ */
+ fd = open("conftestmmap", O_RDWR);
+ if (fd < 0)
+ exit(1);
+ data2 = malloc(2 * pagesize);
+ if (!data2)
+ exit(1);
+ data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
+ if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_FIXED, fd, 0L))
+ exit(1);
+ for (i = 0; i < pagesize; ++i)
+ if (*(data + i) != *(data2 + i))
+ exit(1);
+
+ /*
+ * Finally, make sure that changes to the mapped area
+ * do not percolate back to the file as seen by read().
+ * (This is a bug on some variants of i386 svr4.0.)
+ */
+ for (i = 0; i < pagesize; ++i)
+ *(data2 + i) = *(data2 + i) + 1;
+ data3 = malloc(pagesize);
+ if (!data3)
+ exit(1);
+ if (read(fd, data3, pagesize) != pagesize)
+ exit(1);
+ for (i = 0; i < pagesize; ++i)
+ if (*(data + i) != *(data3 + i))
+ exit(1);
+ close(fd);
+ unlink("conftestmmap");
+ exit(0);
+}
+
+EOF
+if { (eval echo configure:3462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_func_mmap_fixed_mapped=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_func_mmap_fixed_mapped=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
+if test $ac_cv_func_mmap_fixed_mapped = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_MMAP 1
+EOF
+
+fi
+
+
+ for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \
+unistd.h values.h sys/param.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:3490: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3495 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3500: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \
+__argz_count __argz_stringify __argz_next
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3530: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3535 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3558: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
+ if test "${ac_cv_func_stpcpy+set}" != "set"; then
+ for ac_func in stpcpy
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3587: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3592 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3615: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ fi
+ if test "${ac_cv_func_stpcpy}" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_STPCPY 1
+EOF
+
+ fi
+
+ if test $ac_cv_header_locale_h = yes; then
+ echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
+echo "configure:3649: checking for LC_MESSAGES" >&5
+if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3654 "configure"
+#include "confdefs.h"
+#include <locale.h>
+int main() {
+return LC_MESSAGES
+; return 0; }
+EOF
+if { (eval echo configure:3661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ am_cv_val_LC_MESSAGES=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ am_cv_val_LC_MESSAGES=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_val_LC_MESSAGES" 1>&6
+ if test $am_cv_val_LC_MESSAGES = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LC_MESSAGES 1
+EOF
+
+ fi
+ fi
+ echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
+echo "configure:3682: checking whether NLS is requested" >&5
+ # Check whether --enable-nls or --disable-nls was given.
+if test "${enable_nls+set}" = set; then
+ enableval="$enable_nls"
+ USE_NLS=$enableval
+else
+ USE_NLS=yes
+fi
+
+ echo "$ac_t""$USE_NLS" 1>&6
+
+
+ USE_INCLUDED_LIBINTL=no
+
+ if test "$USE_NLS" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_NLS 1
+EOF
+
+ echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
+echo "configure:3702: checking whether included gettext is requested" >&5
+ # Check whether --with-included-gettext or --without-included-gettext was given.
+if test "${with_included_gettext+set}" = set; then
+ withval="$with_included_gettext"
+ nls_cv_force_use_gnu_gettext=$withval
+else
+ nls_cv_force_use_gnu_gettext=no
+fi
+
+ echo "$ac_t""$nls_cv_force_use_gnu_gettext" 1>&6
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+ CATOBJEXT=NONE
+
+ ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
+echo "configure:3721: checking for libintl.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3726 "configure"
+#include "confdefs.h"
+#include <libintl.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3731: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
+echo "configure:3748: checking for gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3753 "configure"
+#include "confdefs.h"
+#include <libintl.h>
+int main() {
+return (int) gettext ("")
+; return 0; }
+EOF
+if { (eval echo configure:3760: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ gt_cv_func_gettext_libc=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gt_cv_func_gettext_libc=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
+
+ if test "$gt_cv_func_gettext_libc" != "yes"; then
+ echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
+echo "configure:3776: checking for bindtextdomain in -lintl" >&5
+ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lintl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3784 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char bindtextdomain();
+
+int main() {
+bindtextdomain()
+; return 0; }
+EOF
+if { (eval echo configure:3795: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
+echo "configure:3811: checking for gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3816 "configure"
+#include "confdefs.h"
+
+int main() {
+return (int) gettext ("")
+; return 0; }
+EOF
+if { (eval echo configure:3823: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ gt_cv_func_gettext_libintl=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gt_cv_func_gettext_libintl=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ if test "$gt_cv_func_gettext_libc" = "yes" \
+ || test "$gt_cv_func_gettext_libintl" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_GETTEXT 1
+EOF
+
+ # Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3851: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$MSGFMT" in
+ /*)
+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+ ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no"
+ ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test -n "$MSGFMT"; then
+ echo "$ac_t""$MSGFMT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ if test "$MSGFMT" != "no"; then
+ for ac_func in dcgettext
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3885: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3890 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3913: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3940: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$GMSGFMT" in
+ /*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ ;;
+esac
+fi
+GMSGFMT="$ac_cv_path_GMSGFMT"
+if test -n "$GMSGFMT"; then
+ echo "$ac_t""$GMSGFMT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ # Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3976: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$XGETTEXT" in
+ /*)
+ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+ ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test -n "$XGETTEXT"; then
+ echo "$ac_t""$XGETTEXT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ cat > conftest.$ac_ext <<EOF
+#line 4008 "configure"
+#include "confdefs.h"
+
+int main() {
+extern int _nl_msg_cat_cntr;
+ return _nl_msg_cat_cntr
+; return 0; }
+EOF
+if { (eval echo configure:4016: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ CATOBJEXT=.gmo
+ DATADIRNAME=share
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CATOBJEXT=.mo
+ DATADIRNAME=lib
+fi
+rm -f conftest*
+ INSTOBJEXT=.mo
+ fi
+ fi
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+
+ if test "$CATOBJEXT" = "NONE"; then
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ INTLOBJS="\$(GETTOBJS)"
+ # Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4048: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$MSGFMT" in
+ /*)
+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+ ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt"
+ ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test -n "$MSGFMT"; then
+ echo "$ac_t""$MSGFMT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4082: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$GMSGFMT" in
+ /*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ ;;
+esac
+fi
+GMSGFMT="$ac_cv_path_GMSGFMT"
+if test -n "$GMSGFMT"; then
+ echo "$ac_t""$GMSGFMT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ # Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4118: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$XGETTEXT" in
+ /*)
+ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+ ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test -n "$XGETTEXT"; then
+ echo "$ac_t""$XGETTEXT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+ USE_INCLUDED_LIBINTL=yes
+ CATOBJEXT=.gmo
+ INSTOBJEXT=.mo
+ DATADIRNAME=share
+ INTLDEPS='$(top_builddir)/../intl/libintl.a'
+ INTLLIBS=$INTLDEPS
+ LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+ nls_cv_header_intl=libintl.h
+ nls_cv_header_libgt=libgettext.h
+ fi
+
+ if test "$XGETTEXT" != ":"; then
+ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+ : ;
+ else
+ echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6
+ XGETTEXT=":"
+ fi
+ fi
+
+ # We need to process the po/ directory.
+ POSUB=po
+ else
+ DATADIRNAME=share
+ nls_cv_header_intl=libintl.h
+ nls_cv_header_libgt=libgettext.h
+ fi
+
+ # If this is used in GNU gettext we have to set USE_NLS to `yes'
+ # because some of the sources are only built for this goal.
+ if test "$PACKAGE" = gettext; then
+ USE_NLS=yes
+ USE_INCLUDED_LIBINTL=yes
+ fi
+
+ for lang in $ALL_LINGUAS; do
+ GMOFILES="$GMOFILES $lang.gmo"
+ POFILES="$POFILES $lang.po"
+ done
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ if test "x$CATOBJEXT" != "x"; then
+ if test "x$ALL_LINGUAS" = "x"; then
+ LINGUAS=
+ else
+ echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
+echo "configure:4208: checking for catalogs to be installed" >&5
+ NEW_LINGUAS=
+ for lang in ${LINGUAS=$ALL_LINGUAS}; do
+ case "$ALL_LINGUAS" in
+ *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+ esac
+ done
+ LINGUAS=$NEW_LINGUAS
+ echo "$ac_t""$LINGUAS" 1>&6
+ fi
+
+ if test -n "$LINGUAS"; then
+ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+ fi
+ fi
+
+ if test $ac_cv_header_locale_h = yes; then
+ INCLUDE_LOCALE_H="#include <locale.h>"
+ else
+ INCLUDE_LOCALE_H="\
+/* The system does not provide the header <locale.h>. Take care yourself. */"
+ fi
+
+
+ if test -f $srcdir/po2tbl.sed.in; then
+ if test "$CATOBJEXT" = ".cat"; then
+ ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
+echo "configure:4236: checking for linux/version.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4241 "configure"
+#include "confdefs.h"
+#include <linux/version.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:4246: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ msgformat=linux
+else
+ echo "$ac_t""no" 1>&6
+msgformat=xopen
+fi
+
+
+ sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
+ fi
+ sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
+ $srcdir/po2tbl.sed.in > po2tbl.sed
+ fi
+
+ if test "$PACKAGE" = "gettext"; then
+ GT_NO="#NO#"
+ GT_YES=
+ else
+ GT_NO=
+ GT_YES="#YES#"
+ fi
+
+
+
+ MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
+
+
+ l=
+
+
+ if test -d $srcdir/po; then
+ test -d po || mkdir po
+ if test "x$srcdir" != "x."; then
+ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+ posrcprefix="$srcdir/"
+ else
+ posrcprefix="../$srcdir/"
+ fi
+ else
+ posrcprefix="../"
+ fi
+ rm -f po/POTFILES
+ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+ < $srcdir/po/POTFILES.in > po/POTFILES
+ fi
+
+
+# Permit host specific settings.
+. ${srcdir}/configure.host
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:4324: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+BFD_HOST_64BIT_LONG=0
+BFD_HOST_64_BIT_DEFINED=0
+BFD_HOST_64_BIT=
+BFD_HOST_U_64_BIT=
+if test "x${HOST_64BIT_TYPE}" = "xlong"; then
+ BFD_HOST_64BIT_LONG=1
+elif test "x${HOST_64BIT_TYPE}" != "x"; then
+ BFD_HOST_64_BIT_DEFINED=1
+ BFD_HOST_64_BIT=${HOST_64BIT_TYPE}
+ BFD_HOST_U_64_BIT=${HOST_U_64BIT_TYPE}
+fi
+
+
+
+
+
+# Put a plausible default for CC_FOR_BUILD in Makefile.
+if test -z "$CC_FOR_BUILD"; then
+ if test "x$cross_compiling" = "xno"; then
+ CC_FOR_BUILD='$(CC)'
+ else
+ CC_FOR_BUILD=gcc
+ fi
+fi
+
+# Also set EXEEXT_FOR_BUILD.
+if test "x$cross_compiling" = "xno"; then
+ EXEEXT_FOR_BUILD='$(EXEEXT)'
+else
+ echo $ac_n "checking for build system executable suffix""... $ac_c" 1>&6
+echo "configure:4407: checking for build system executable suffix" >&5
+if eval "test \"`echo '$''{'bfd_cv_build_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.c
+ bfd_cv_build_exeext=
+ ${CC_FOR_BUILD} -o conftest conftest.c 1>&5 2>&5
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *) bfd_cv_build_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ rm -f conftest*
+ test x"${bfd_cv_build_exeext}" = x && bfd_cv_build_exeext=no
+fi
+
+echo "$ac_t""$bfd_cv_build_exeext" 1>&6
+ EXEEXT_FOR_BUILD=""
+ test x"${bfd_cv_build_exeext}" != xno && EXEEXT_FOR_BUILD=${bfd_cv_build_exeext}
+fi
+
+
+for ac_hdr in stddef.h string.h strings.h stdlib.h time.h unistd.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:4435: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4440 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:4445: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in fcntl.h sys/file.h sys/time.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:4475: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4480 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:4485: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
+echo "configure:4512: checking whether time.h and sys/time.h may both be included" >&5
+if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4517 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+int main() {
+struct tm *tp;
+; return 0; }
+EOF
+if { (eval echo configure:4526: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_header_time=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_header_time=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_header_time" 1>&6
+if test $ac_cv_header_time = yes; then
+ cat >> confdefs.h <<\EOF
+#define TIME_WITH_SYS_TIME 1
+EOF
+
+fi
+
+ac_header_dirent=no
+for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
+echo "configure:4551: checking for $ac_hdr that defines DIR" >&5
+if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4556 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <$ac_hdr>
+int main() {
+DIR *dirp = 0;
+; return 0; }
+EOF
+if { (eval echo configure:4564: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ eval "ac_cv_header_dirent_$ac_safe=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_dirent_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ ac_header_dirent=$ac_hdr; break
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
+if test $ac_header_dirent = dirent.h; then
+echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
+echo "configure:4589: checking for opendir in -ldir" >&5
+ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldir $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4597 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char opendir();
+
+int main() {
+opendir()
+; return 0; }
+EOF
+if { (eval echo configure:4608: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBS="$LIBS -ldir"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
+echo "configure:4630: checking for opendir in -lx" >&5
+ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lx $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4638 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char opendir();
+
+int main() {
+opendir()
+; return 0; }
+EOF
+if { (eval echo configure:4649: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBS="$LIBS -lx"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+for ac_func in fcntl getpagesize setitimer sysconf fdopen getuid getgid
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:4674: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4679 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:4702: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
+
+case "${host}" in
+*-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-cygwin* | *-*-windows*)
+ cat >> confdefs.h <<\EOF
+#define USE_BINARY_FOPEN 1
+EOF
+ ;;
+esac
+
+echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
+echo "configure:4737: checking whether strstr must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4742 "configure"
+#include "confdefs.h"
+
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int main() {
+char *(*pfn) = (char *(*)) strstr
+; return 0; }
+EOF
+if { (eval echo configure:4763: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_decl_needed_strstr=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_decl_needed_strstr=yes
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$bfd_cv_decl_needed_strstr" 1>&6
+if test $bfd_cv_decl_needed_strstr = yes; then
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_STRSTR 1
+EOF
+
+fi
+
+echo $ac_n "checking whether malloc must be declared""... $ac_c" 1>&6
+echo "configure:4784: checking whether malloc must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_malloc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4789 "configure"
+#include "confdefs.h"
+
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int main() {
+char *(*pfn) = (char *(*)) malloc
+; return 0; }
+EOF
+if { (eval echo configure:4810: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_decl_needed_malloc=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_decl_needed_malloc=yes
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$bfd_cv_decl_needed_malloc" 1>&6
+if test $bfd_cv_decl_needed_malloc = yes; then
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_MALLOC 1
+EOF
+
+fi
+
+echo $ac_n "checking whether realloc must be declared""... $ac_c" 1>&6
+echo "configure:4831: checking whether realloc must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_realloc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4836 "configure"
+#include "confdefs.h"
+
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int main() {
+char *(*pfn) = (char *(*)) realloc
+; return 0; }
+EOF
+if { (eval echo configure:4857: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_decl_needed_realloc=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_decl_needed_realloc=yes
fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-BFD_HOST_64BIT_LONG=0
-BFD_HOST_64_BIT_DEFINED=0
-BFD_HOST_64_BIT=
-BFD_HOST_U_64_BIT=
-if test "x${HOST_64BIT_TYPE}" = "xlong"; then
- BFD_HOST_64BIT_LONG=1
-elif test "x${HOST_64BIT_TYPE}" != "x"; then
- BFD_HOST_64_BIT_DEFINED=1
- BFD_HOST_64_BIT=${HOST_64BIT_TYPE}
- BFD_HOST_U_64_BIT=${HOST_U_64BIT_TYPE}
+rm -f conftest*
fi
+echo "$ac_t""$bfd_cv_decl_needed_realloc" 1>&6
+if test $bfd_cv_decl_needed_realloc = yes; then
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_REALLOC 1
+EOF
-
-
-
-# Put a plausible default for CC_FOR_BUILD in Makefile.
-if test -z "$CC_FOR_BUILD"; then
- if test "x$cross_compiling" = "xno"; then
- CC_FOR_BUILD='$(CC)'
- else
- CC_FOR_BUILD=gcc
- fi
fi
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1752: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
+echo "configure:4878: checking whether free must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1767 "configure"
+#line 4883 "configure"
#include "confdefs.h"
-#include <assert.h>
-Syntax Error
+
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int main() {
+char *(*pfn) = (char *(*)) free
+; return 0; }
EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1773: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
+if { (eval echo configure:4904: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_decl_needed_free=no
else
- echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- CPP="${CC-cc} -E -traditional-cpp"
+ bfd_cv_decl_needed_free=yes
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$bfd_cv_decl_needed_free" 1>&6
+if test $bfd_cv_decl_needed_free = yes; then
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_FREE 1
+EOF
+
+fi
+
+echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
+echo "configure:4925: checking whether getenv must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
cat > conftest.$ac_ext <<EOF
-#line 1784 "configure"
+#line 4930 "configure"
#include "confdefs.h"
-#include <assert.h>
-Syntax Error
+
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int main() {
+char *(*pfn) = (char *(*)) getenv
+; return 0; }
EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
+if { (eval echo configure:4951: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_decl_needed_getenv=no
else
- echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- CPP=/lib/cpp
-fi
-rm -f conftest*
+ bfd_cv_decl_needed_getenv=yes
fi
rm -f conftest*
- ac_cv_prog_CPP="$CPP"
fi
- CPP="$ac_cv_prog_CPP"
-else
- ac_cv_prog_CPP="$CPP"
+
+echo "$ac_t""$bfd_cv_decl_needed_getenv" 1>&6
+if test $bfd_cv_decl_needed_getenv = yes; then
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_GETENV 1
+EOF
+
fi
-echo "$ac_t""$CPP" 1>&6
-for ac_hdr in stddef.h string.h strings.h stdlib.h time.h unistd.h
+
+# If we are configured native, pick a core file support file.
+COREFILE=
+COREFLAG=
+TRAD_HEADER=
+if test "${target}" = "${host}"; then
+ case "${host}" in
+ alpha*-*-freebsd*)
+ COREFILE=''
+ ;;
+ alpha*-*-linux-gnu*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/alphalinux.h"'
+ ;;
+ alpha*-*-netbsd*) COREFILE=netbsd-core.lo ;;
+ alpha*-*-*) COREFILE=osf-core.lo ;;
+ arm-*-riscix) COREFILE=trad-core.lo ;;
+ hppa*-*-hpux*) COREFILE=hpux-core.lo ;;
+ hppa*-*-hiux*) COREFILE=hpux-core.lo ;;
+ hppa*-*-mpeix*) COREFILE=hpux-core.lo ;;
+ hppa*-*-bsd*) COREFILE="hpux-core.lo hppabsd-core.lo"
+ COREFLAG="-DHPUX_CORE -DHPPABSD_CORE" ;;
+ i370-*-*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/i370linux.h"'
+ ;;
+
+ i[3456]86-sequent-bsd*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/symmetry.h"'
+ ;;
+ i[3456]86-sequent-sysv4*) ;;
+ i[3456]86-sequent-sysv*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/symmetry.h"'
+ ;;
+ i[3456]86-*-bsd* | i[3456]86-*-freebsd*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/i386bsd.h"'
+ ;;
+ i[3456]86-*-netbsd* | i[3456]86-*-openbsd*)
+ COREFILE=netbsd-core.lo
+ ;;
+ i[3456]86-esix-sysv3*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/esix.h"'
+ ;;
+ i[3456]86-*-sco3.2v5*)
+ COREFILE=sco5-core.lo
+ ;;
+ i[3456]86-*-sco* | i[3456]86-*-isc*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/i386sco.h"'
+ ;;
+ i[3456]86-*-mach3*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/i386mach3.h"'
+ ;;
+ i[3456]86-*-linux-gnu*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/i386linux.h"'
+ ;;
+ i[3456]86-*-isc*) COREFILE=trad-core.lo ;;
+ i[3456]86-*-aix*) COREFILE=aix386-core.lo ;;
+ i860-*-mach3* | i860-*-osf1*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/i860mach3.h"'
+ ;;
+ mips-dec-bsd*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/mipsbsd.h"'
+ ;;
+ mips-dec-mach3*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/mipsmach3.h"'
+ ;;
+ mips-*-netbsd* | mips*-*-openbsd*)
+ COREFILE=netbsd-core.lo
+ ;;
+ mips-dec-*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/decstation.h"'
+ ;;
+ mips-sgi-irix4*) COREFILE=irix-core.lo ;;
+ mips-sgi-irix5*) COREFILE=irix-core.lo ;;
+ mips-sgi-irix6*) COREFILE=irix-core.lo ;;
+ mips-*-mach3*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/mipsmach3.h"'
+ ;;
+ mips-*-sysv4*) ;;
+ mips-*-sysv* | mips-*-riscos*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/riscos.h"'
+ ;;
+ mips-sony-bsd*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/news-mips.h"'
+ ;;
+ m68*-bull*-sysv*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/dpx2.h"'
+ ;;
+ m68*-hp-hpux*) COREFILE=hpux-core.lo ;;
+ m68*-hp-bsd*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/hp300bsd.h"'
+ ;;
+ m68*-*-linux-gnu*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/m68klinux.h"'
+ ;;
+ m68*-motorola-sysv*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/delta68.h"'
+ ;;
+ m68*-sony-*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/news.h"'
+ ;;
+ m68*-*-netbsd* | m68*-*-openbsd*)
+ COREFILE=netbsd-core.lo
+ ;;
+ m68*-apple-aux*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/m68kaux.h"'
+ ;;
+ m88*-*-sysv4*) ;;
+ m88*-motorola-sysv*) COREFILE=ptrace-core.lo ;;
+ m88*-*-mach3*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/m88kmach3.h"'
+ ;;
+ ns32k-pc532-mach)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/pc532mach.h"'
+ ;;
+ ns32k-*-netbsd* | ns32k-*-openbsd*)
+ COREFILE=netbsd-core.lo
+ ;;
+ rs6000-*-lynx*) COREFILE=lynx-core.lo ;;
+ rs6000-*-aix4.[3-9]* | powerpc-*-aix4.[3-9]*)
+ COREFILE=rs6000-core.lo
+ COREFLAG="$COREFLAG -DAIX_CORE_DUMPX_CORE"
+ ;;
+ rs6000-*-aix4*) COREFILE=rs6000-core.lo ;;
+ rs6000-*-*) COREFILE=rs6000-core.lo ;;
+ powerpc-*-*bsd*) COREFILE=netbsd-core.lo ;;
+ powerpc-*-aix4*) COREFILE=rs6000-core.lo ;;
+ powerpc-*-aix*) COREFILE=rs6000-core.lo ;;
+ powerpc-*-beos*) ;;
+ powerpc-*-netbsd*) COREFILE=netbsd-core.lo ;;
+ sparc-*-netbsd* | sparc-*-openbsd*)
+ COREFILE=netbsd-core.lo
+ ;;
+ tahoe-*-*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/tahoe.h"'
+ ;;
+ vax-*-ultrix2*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/vaxult2.h"'
+ ;;
+ vax-*-ultrix*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/vaxult2.h"'
+ ;;
+ vax-*-*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/vaxbsd.h"'
+ ;;
+ esac
+
+ case "$COREFILE" in
+ aix386-core.lo) COREFLAG=-DAIX386_CORE ;;
+ hppabsd-core.lo) COREFLAG=-DHPPABSD_CORE ;;
+ hpux-core.lo) COREFLAG=-DHPUX_CORE ;;
+ irix-core.lo) COREFLAG=-DIRIX_CORE ;;
+ lynx-core.lo) COREFLAG=-DLYNX_CORE ;;
+ netbsd-core.lo) COREFLAG=-DNETBSD_CORE ;;
+ osf-core.lo) COREFLAG=-DOSF_CORE ;;
+ ptrace-core.lo) COREFLAG=-DPTRACE_CORE ;;
+ rs6000-core.lo) COREFLAG="$COREFLAG -DAIX_CORE" ;;
+ sco5-core.lo) COREFLAG="$COREFLAG -DSCO5_CORE" ;;
+ trad-core.lo) COREFLAG="$COREFLAG -DTRAD_CORE" ;;
+ esac
+
+ # ELF corefile support has several flavors, but all of
+ # them use something called <sys/procfs.h>
+ for ac_hdr in sys/procfs.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1816: checking for $ac_hdr" >&5
+echo "configure:5164: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1821 "configure"
+#line 5169 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1826: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:5174: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
fi
done
-for ac_hdr in fcntl.h sys/file.h sys/time.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1856: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ if test "$ac_cv_header_sys_procfs_h" = yes; then
+ echo $ac_n "checking for prstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5202: checking for prstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1861 "configure"
+#line 5207 "configure"
#include "confdefs.h"
-#include <$ac_hdr>
+
+#define _SYSCALL32
+#include <sys/procfs.h>
+int main() {
+prstatus_t avar
+; return 0; }
EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1866: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
+if { (eval echo configure:5216: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
+ bfd_cv_have_sys_procfs_type_prstatus_t=yes
else
- echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
+ bfd_cv_have_sys_procfs_type_prstatus_t=no
+
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
+
+ if test $bfd_cv_have_sys_procfs_type_prstatus_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PRSTATUS_T 1
EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-done
-echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1893: checking whether time.h and sys/time.h may both be included" >&5
-if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_prstatus_t" 1>&6
+
+ echo $ac_n "checking for prstatus32_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5238: checking for prstatus32_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prstatus32_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1898 "configure"
+#line 5243 "configure"
#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/time.h>
-#include <time.h>
+
+#define _SYSCALL32
+#include <sys/procfs.h>
int main() {
-struct tm *tp;
+prstatus32_t avar
; return 0; }
EOF
-if { (eval echo configure:1907: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5252: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- ac_cv_header_time=yes
+ bfd_cv_have_sys_procfs_type_prstatus32_t=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- ac_cv_header_time=no
+ bfd_cv_have_sys_procfs_type_prstatus32_t=no
+
fi
rm -f conftest*
fi
-echo "$ac_t""$ac_cv_header_time" 1>&6
-if test $ac_cv_header_time = yes; then
- cat >> confdefs.h <<\EOF
-#define TIME_WITH_SYS_TIME 1
+ if test $bfd_cv_have_sys_procfs_type_prstatus32_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PRSTATUS32_T 1
EOF
-fi
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_prstatus32_t" 1>&6
-for ac_func in fcntl getpagesize setitimer sysconf fdopen
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1930: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "checking for prstatus_t.pr_who in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5274: checking for prstatus_t.pr_who in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1935 "configure"
+#line 5279 "configure"
#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
+#define _SYSCALL32
+#include <sys/procfs.h>
int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
+prstatus_t avar; void* aref = (void*) &avar.pr_who
; return 0; }
EOF
-if { (eval echo configure:1958: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5288: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
+ bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
+ bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who=no
+
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
+ if test $bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PRSTATUS_T_PR_WHO 1
EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-done
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who" 1>&6
-
-case "${host}" in
-i[345]86-*-msdos* | i[345]86-*-go32* | *-*-cygwin32 | *-*-windows)
- cat >> confdefs.h <<\EOF
-#define USE_BINARY_FOPEN 1
-EOF
- ;;
-esac
-
-echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
-echo "configure:1993: checking whether strstr must be declared" >&5
-if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
+ echo $ac_n "checking for prstatus32_t.pr_who in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5310: checking for prstatus32_t.pr_who in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_prstatus32_t_pr_who'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1998 "configure"
+#line 5315 "configure"
#include "confdefs.h"
-#include <stdio.h>
-#ifdef HAVE_STRING_H
-#include <string.h>
-#else
-#ifdef HAVE_STRINGS_H
-#include <strings.h>
-#endif
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
+#define _SYSCALL32
+#include <sys/procfs.h>
int main() {
-char *(*pfn) = (char *(*)) strstr
+prstatus32_t avar; void* aref = (void*) &avar.pr_who
; return 0; }
EOF
-if { (eval echo configure:2019: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5324: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- bfd_cv_decl_needed_strstr=no
+ bfd_cv_have_sys_procfs_type_member_prstatus32_t_pr_who=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- bfd_cv_decl_needed_strstr=yes
+ bfd_cv_have_sys_procfs_type_member_prstatus32_t_pr_who=no
+
fi
rm -f conftest*
fi
-echo "$ac_t""$bfd_cv_decl_needed_strstr" 1>&6
-if test $bfd_cv_decl_needed_strstr = yes; then
- bfd_tr_decl=NEED_DECLARATION_`echo strstr | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $bfd_tr_decl 1
+ if test $bfd_cv_have_sys_procfs_type_member_prstatus32_t_pr_who = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PRSTATUS32_T_PR_WHO 1
EOF
-fi
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_prstatus32_t_pr_who" 1>&6
-echo $ac_n "checking whether malloc must be declared""... $ac_c" 1>&6
-echo "configure:2041: checking whether malloc must be declared" >&5
-if eval "test \"`echo '$''{'bfd_cv_decl_needed_malloc'+set}'`\" = set"; then
+ echo $ac_n "checking for pstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5346: checking for pstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_pstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2046 "configure"
+#line 5351 "configure"
#include "confdefs.h"
-#include <stdio.h>
-#ifdef HAVE_STRING_H
-#include <string.h>
-#else
-#ifdef HAVE_STRINGS_H
-#include <strings.h>
-#endif
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
+#define _SYSCALL32
+#include <sys/procfs.h>
int main() {
-char *(*pfn) = (char *(*)) malloc
+pstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:2067: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5360: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- bfd_cv_decl_needed_malloc=no
+ bfd_cv_have_sys_procfs_type_pstatus_t=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- bfd_cv_decl_needed_malloc=yes
+ bfd_cv_have_sys_procfs_type_pstatus_t=no
+
fi
rm -f conftest*
fi
-echo "$ac_t""$bfd_cv_decl_needed_malloc" 1>&6
-if test $bfd_cv_decl_needed_malloc = yes; then
- bfd_tr_decl=NEED_DECLARATION_`echo malloc | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $bfd_tr_decl 1
+ if test $bfd_cv_have_sys_procfs_type_pstatus_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PSTATUS_T 1
EOF
-fi
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_pstatus_t" 1>&6
-echo $ac_n "checking whether realloc must be declared""... $ac_c" 1>&6
-echo "configure:2089: checking whether realloc must be declared" >&5
-if eval "test \"`echo '$''{'bfd_cv_decl_needed_realloc'+set}'`\" = set"; then
+ echo $ac_n "checking for pxstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5382: checking for pxstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_pxstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2094 "configure"
+#line 5387 "configure"
#include "confdefs.h"
-#include <stdio.h>
-#ifdef HAVE_STRING_H
-#include <string.h>
-#else
-#ifdef HAVE_STRINGS_H
-#include <strings.h>
-#endif
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
+#define _SYSCALL32
+#include <sys/procfs.h>
int main() {
-char *(*pfn) = (char *(*)) realloc
+pxstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:2115: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5396: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- bfd_cv_decl_needed_realloc=no
+ bfd_cv_have_sys_procfs_type_pxstatus_t=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- bfd_cv_decl_needed_realloc=yes
+ bfd_cv_have_sys_procfs_type_pxstatus_t=no
+
fi
rm -f conftest*
fi
-echo "$ac_t""$bfd_cv_decl_needed_realloc" 1>&6
-if test $bfd_cv_decl_needed_realloc = yes; then
- bfd_tr_decl=NEED_DECLARATION_`echo realloc | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $bfd_tr_decl 1
+ if test $bfd_cv_have_sys_procfs_type_pxstatus_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PXSTATUS_T 1
EOF
-fi
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_pxstatus_t" 1>&6
-echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
-echo "configure:2137: checking whether free must be declared" >&5
-if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
+ echo $ac_n "checking for pstatus32_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5418: checking for pstatus32_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_pstatus32_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2142 "configure"
+#line 5423 "configure"
#include "confdefs.h"
-#include <stdio.h>
-#ifdef HAVE_STRING_H
-#include <string.h>
-#else
-#ifdef HAVE_STRINGS_H
-#include <strings.h>
-#endif
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
+#define _SYSCALL32
+#include <sys/procfs.h>
int main() {
-char *(*pfn) = (char *(*)) free
+pstatus32_t avar
; return 0; }
EOF
-if { (eval echo configure:2163: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5432: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- bfd_cv_decl_needed_free=no
+ bfd_cv_have_sys_procfs_type_pstatus32_t=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- bfd_cv_decl_needed_free=yes
+ bfd_cv_have_sys_procfs_type_pstatus32_t=no
+
fi
rm -f conftest*
fi
-echo "$ac_t""$bfd_cv_decl_needed_free" 1>&6
-if test $bfd_cv_decl_needed_free = yes; then
- bfd_tr_decl=NEED_DECLARATION_`echo free | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $bfd_tr_decl 1
+ if test $bfd_cv_have_sys_procfs_type_pstatus32_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PSTATUS32_T 1
EOF
-fi
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_pstatus32_t" 1>&6
-echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
-echo "configure:2185: checking whether getenv must be declared" >&5
-if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
+ echo $ac_n "checking for prpsinfo_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5454: checking for prpsinfo_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prpsinfo_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2190 "configure"
+#line 5459 "configure"
#include "confdefs.h"
-#include <stdio.h>
-#ifdef HAVE_STRING_H
-#include <string.h>
-#else
-#ifdef HAVE_STRINGS_H
-#include <strings.h>
-#endif
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
+#define _SYSCALL32
+#include <sys/procfs.h>
int main() {
-char *(*pfn) = (char *(*)) getenv
+prpsinfo_t avar
; return 0; }
EOF
-if { (eval echo configure:2211: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5468: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- bfd_cv_decl_needed_getenv=no
+ bfd_cv_have_sys_procfs_type_prpsinfo_t=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- bfd_cv_decl_needed_getenv=yes
+ bfd_cv_have_sys_procfs_type_prpsinfo_t=no
+
fi
rm -f conftest*
fi
-echo "$ac_t""$bfd_cv_decl_needed_getenv" 1>&6
-if test $bfd_cv_decl_needed_getenv = yes; then
- bfd_tr_decl=NEED_DECLARATION_`echo getenv | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $bfd_tr_decl 1
+ if test $bfd_cv_have_sys_procfs_type_prpsinfo_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PRPSINFO_T 1
EOF
-fi
-
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_prpsinfo_t" 1>&6
-# If we are configured native, pick a core file support file.
-COREFILE=
-COREFLAG=
-if test "${target}" = "${host}"; then
- case "${host}" in
- alpha*-*-linux*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/alphalinux.h"
-EOF
+ echo $ac_n "checking for prpsinfo32_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5490: checking for prpsinfo32_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prpsinfo32_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5495 "configure"
+#include "confdefs.h"
- ;;
- alpha*-*-*) COREFILE=osf-core.lo ;;
- arm-*-riscix) COREFILE=trad-core.lo ;;
- hppa*-*-hpux*) COREFILE=hpux-core.lo ;;
- hppa*-*-hiux*) COREFILE=hpux-core.lo ;;
- hppa*-*-bsd*) COREFILE="hpux-core.lo hppabsd-core.lo"
- COREFLAG="-DHPUX_CORE -DHPPABSD_CORE" ;;
- i[3456]86-sequent-bsd*)
- COREFILE=trad-core.lo;
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/symmetry.h"
+#define _SYSCALL32
+#include <sys/procfs.h>
+int main() {
+prpsinfo32_t avar
+; return 0; }
EOF
+if { (eval echo configure:5504: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_prpsinfo32_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_prpsinfo32_t=no
+
+fi
+rm -f conftest*
+fi
- ;;
- i[3456]86-sequent-sysv4*) ;;
- i[3456]86-sequent-sysv*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/symmetry.h"
+ if test $bfd_cv_have_sys_procfs_type_prpsinfo32_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PRPSINFO32_T 1
EOF
- ;;
- i[3456]86-*-bsd* | i[3456]86-*-freebsd*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/i386bsd.h"
-EOF
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_prpsinfo32_t" 1>&6
- ;;
- i[3456]86-*-netbsd* | i[3456]86-*-openbsd*)
- COREFILE=netbsd-core.lo
- ;;
- i[3456]86-esix-sysv3*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/esix.h"
-EOF
+ echo $ac_n "checking for psinfo_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5526: checking for psinfo_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_psinfo_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5531 "configure"
+#include "confdefs.h"
- ;;
- i[3456]86-*-sco* | i[3456]86-*-isc*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/i386sco.h"
+#define _SYSCALL32
+#include <sys/procfs.h>
+int main() {
+psinfo_t avar
+; return 0; }
EOF
+if { (eval echo configure:5540: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_psinfo_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_psinfo_t=no
+
+fi
+rm -f conftest*
+fi
- ;;
- i[3456]86-*-mach3*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/i386mach3.h"
+ if test $bfd_cv_have_sys_procfs_type_psinfo_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PSINFO_T 1
EOF
- ;;
- i[3456]86-*-linux*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/i386linux.h"
-EOF
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_psinfo_t" 1>&6
- ;;
- i[3456]86-*-isc*) COREFILE=trad-core.lo ;;
- i[3456]86-*-aix*) COREFILE=aix386-core.lo ;;
- i860-*-mach3* | i860-*-osf1*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/i860mach3.h"
-EOF
+ echo $ac_n "checking for psinfo32_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5562: checking for psinfo32_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_psinfo32_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5567 "configure"
+#include "confdefs.h"
- ;;
- mips-dec-bsd*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/mipsbsd.h"
+#define _SYSCALL32
+#include <sys/procfs.h>
+int main() {
+psinfo32_t avar
+; return 0; }
EOF
+if { (eval echo configure:5576: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_psinfo32_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_psinfo32_t=no
+
+fi
+rm -f conftest*
+fi
- ;;
- mips-dec-mach3*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/mipsmach3.h"
+ if test $bfd_cv_have_sys_procfs_type_psinfo32_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PSINFO32_T 1
EOF
- ;;
- mips-*-netbsd* | mips*-*-openbsd*)
- COREFILE=netbsd-core.lo
- ;;
- mips-dec-*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/decstation.h"
-EOF
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_psinfo32_t" 1>&6
- ;;
- mips-sgi-irix4*) COREFILE=irix-core.lo ;;
- mips-sgi-irix5*) COREFILE=irix-core.lo ;;
- mips-sgi-irix6*) COREFILE=irix-core.lo ;;
- mips-*-mach3*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/mipsmach3.h"
-EOF
+ echo $ac_n "checking for lwpstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5598: checking for lwpstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_lwpstatus_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5603 "configure"
+#include "confdefs.h"
- ;;
- mips-*-sysv4*) ;;
- mips-*-sysv* | mips-*-riscos*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/riscos.h"
+#define _SYSCALL32
+#include <sys/procfs.h>
+int main() {
+lwpstatus_t avar
+; return 0; }
EOF
+if { (eval echo configure:5612: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_lwpstatus_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_lwpstatus_t=no
+
+fi
+rm -f conftest*
+fi
- ;;
- mips-sony-bsd*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/news-mips.h"
+ if test $bfd_cv_have_sys_procfs_type_lwpstatus_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LWPSTATUS_T 1
EOF
- ;;
- m68*-bull*-sysv*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/dpx2.h"
-EOF
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_lwpstatus_t" 1>&6
- ;;
- m68*-hp-hpux*) COREFILE=hpux-core.lo ;;
- m68*-hp-bsd*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/hp300bsd.h"
-EOF
+ echo $ac_n "checking for lwpxstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5634: checking for lwpxstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_lwpxstatus_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5639 "configure"
+#include "confdefs.h"
- ;;
- m68*-*-linux*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/m68klinux.h"
+#define _SYSCALL32
+#include <sys/procfs.h>
+int main() {
+lwpxstatus_t avar
+; return 0; }
EOF
+if { (eval echo configure:5648: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_lwpxstatus_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_lwpxstatus_t=no
+
+fi
+rm -f conftest*
+fi
- ;;
- m68*-motorola-sysv*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/delta68.h"
+ if test $bfd_cv_have_sys_procfs_type_lwpxstatus_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LWPXSTATUS_T 1
EOF
- ;;
- m68*-sony-*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/news.h"
-EOF
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_lwpxstatus_t" 1>&6
- ;;
- m68*-*-netbsd* | m68*-*-openbsd*)
- COREFILE=netbsd-core.lo
- ;;
- m68*-apple-aux*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/m68kaux.h"
-EOF
+ echo $ac_n "checking for lwpstatus_t.pr_context in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5670: checking for lwpstatus_t.pr_context in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5675 "configure"
+#include "confdefs.h"
- ;;
- m88*-*-sysv4*) ;;
- m88*-motorola-sysv*) COREFILE=ptrace-core.lo ;;
- m88*-*-mach3*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/m88kmach3.h"
+#define _SYSCALL32
+#include <sys/procfs.h>
+int main() {
+lwpstatus_t avar; void* aref = (void*) &avar.pr_context
+; return 0; }
EOF
+if { (eval echo configure:5684: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context=no
+
+fi
+rm -f conftest*
+fi
- ;;
- ns32k-pc532-mach)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/pc532mach.h"
+ if test $bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LWPSTATUS_T_PR_CONTEXT 1
EOF
- ;;
- ns32k-*-netbsd* | ns32k-*-openbsd*)
- COREFILE=netbsd-core.lo
- ;;
- rs6000-*-lynx*) COREFILE=lynx-core.lo ;;
- rs6000-*-aix4*) COREFILE=rs6000-core.lo ;;
- rs6000-*-*) COREFILE=rs6000-core.lo ;;
- powerpc-*-*bsd*) COREFILE=netbsd-core.lo ;;
- powerpc-*-aix4*) COREFILE=rs6000-core.lo ;;
- powerpc-*-aix*) COREFILE=rs6000-core.lo ;;
- powerpc-*-beos*) ;;
- sparc-*-netbsd* | sparc-*-openbsd*)
- COREFILE=netbsd-core.lo
- ;;
- tahoe-*-*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/tahoe.h"
-EOF
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context" 1>&6
- ;;
- vax-*-ultrix2*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/vaxult2.h"
-EOF
+ echo $ac_n "checking for lwpstatus_t.pr_reg in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5706: checking for lwpstatus_t.pr_reg in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5711 "configure"
+#include "confdefs.h"
- ;;
- vax-*-ultrix*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/vaxult2.h"
+#define _SYSCALL32
+#include <sys/procfs.h>
+int main() {
+lwpstatus_t avar; void* aref = (void*) &avar.pr_reg
+; return 0; }
EOF
+if { (eval echo configure:5720: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg=no
+
+fi
+rm -f conftest*
+fi
- ;;
- vax-*-*)
- COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/vaxbsd.h"
+ if test $bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LWPSTATUS_T_PR_REG 1
EOF
- ;;
- esac
-
- case "$COREFILE" in
- aix386-core.lo) COREFLAG=-DAIX386_CORE ;;
- hppabsd-core.lo) COREFLAG=-DHPPABSD_CORE ;;
- hpux-core.lo) COREFLAG=-DHPUX_CORE ;;
- irix-core.lo) COREFLAG=-DIRIX_CORE ;;
- lynx-core.lo) COREFLAG=-DLYNX_CORE ;;
- osf-core.lo) COREFLAG=-DOSF_CORE ;;
- ptrace-core.lo) COREFLAG=-DPTRACE_CORE ;;
- rs6000-core.lo) COREFLAG="$COREFLAG -DAIX_CORE" ;;
- trad-core.lo) COREFLAG="$COREFLAG -DTRAD_CORE" ;;
- esac
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg" 1>&6
- # The ELF code uses the native <sys/procfs.h> to handle core files.
- # Define HAVE_SYS_PROCFS_H if the file exists and defines
- # prstatus_t.
- echo $ac_n "checking for sys/procfs.h""... $ac_c" 1>&6
-echo "configure:2483: checking for sys/procfs.h" >&5
- if eval "test \"`echo '$''{'bfd_cv_header_sys_procfs_h'+set}'`\" = set"; then
+ echo $ac_n "checking for win32_pstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5742: checking for win32_pstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_win32_pstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2488 "configure"
+#line 5747 "configure"
#include "confdefs.h"
+
+#define _SYSCALL32
#include <sys/procfs.h>
int main() {
-prstatus_t t;
+win32_pstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:2495: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5756: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- bfd_cv_header_sys_procfs_h=yes
+ bfd_cv_have_sys_procfs_type_win32_pstatus_t=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- bfd_cv_header_sys_procfs_h=no
+ bfd_cv_have_sys_procfs_type_win32_pstatus_t=no
+
fi
rm -f conftest*
fi
- echo "$ac_t""$bfd_cv_header_sys_procfs_h" 1>&6
- if test $bfd_cv_header_sys_procfs_h = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_PROCFS_H 1
+ if test $bfd_cv_have_sys_procfs_type_win32_pstatus_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_WIN32_PSTATUS_T 1
EOF
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_win32_pstatus_t" 1>&6
+
fi
+fi
+
+
+if test -n "$TRAD_HEADER"; then
+ cat >> confdefs.h <<EOF
+#define TRAD_HEADER $TRAD_HEADER
+EOF
fi
+# Horrible hacks to build DLLs on Windows.
+WIN32LDFLAGS=
+WIN32LIBADD=
+case "${host}" in
+*-*-cygwin*)
+ if test "$enable_shared" = "yes"; then
+ WIN32LDFLAGS="-no-undefined"
+ WIN32LIBADD="-L`pwd`/../libiberty -liberty -L`pwd`/../intl -lintl -lcygwin -lkernel32"
+ fi
+ ;;
+esac
+
# target stuff:
if test -n "$enable_targets" ; then
for targ in `echo $enable_targets | sed 's/,/ /g'`
do
- result=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $targ 2>/dev/null`
+ result=`$ac_config_sub $targ 2>/dev/null`
if test -n "$result" ; then
canon_targets="$canon_targets $result"
else
# 64-bit support needs to be compiled in. Currently, it will be included if
# the default or any other explicitly requested target requires it; it
# will not be included on a 32-bit host if no 64-bit target is requested, and
-# no "--with-64-bit-bfd" option is given, even if "--with-targets=all" is
+# no "--with-64-bit-bfd" option is given, even if "--enable-targets=all" is
# used.
# uniq the default and selected vectors in all the configured targets.
done
selvecs="$f"
+
# uniq the architectures in all the configured targets.
f=""
for i in $selarchs ; do
# Target backend .o files.
tb=
-elf="elf.lo elflink.lo"
+elf="elf.lo elflink.lo dwarf2.lo dwarf1.lo"
for vec in $selvecs
do
a_out_adobe_vec) tb="$tb aout-adobe.lo aout32.lo" ;;
armcoff_little_vec) tb="$tb coff-arm.lo cofflink.lo " ;;
armcoff_big_vec) tb="$tb coff-arm.lo cofflink.lo " ;;
- armpe_little_vec) tb="$tb pe-arm.lo cofflink.lo " ;;
- armpe_big_vec) tb="$tb pe-arm.lo cofflink.lo " ;;
- armpei_little_vec) tb="$tb pei-arm.lo cofflink.lo " ;;
- armpei_big_vec) tb="$tb pei-arm.lo cofflink.lo " ;;
+ armnetbsd_vec) tb="$tb armnetbsd.lo aout32.lo" ;;
+ armpe_little_vec) tb="$tb pe-arm.lo peigen.lo cofflink.lo " ;;
+ armpe_big_vec) tb="$tb pe-arm.lo peigen.lo cofflink.lo " ;;
+ armpei_little_vec) tb="$tb pei-arm.lo peigen.lo cofflink.lo " ;;
+ armpei_big_vec) tb="$tb pei-arm.lo peigen.lo cofflink.lo " ;;
+ arm_epoc_pe_little_vec) tb="$tb epoc-pe-arm.lo peigen.lo cofflink.lo " ;;
+ arm_epoc_pe_big_vec) tb="$tb epoc-pe-arm.lo peigen.lo cofflink.lo " ;;
+ arm_epoc_pei_little_vec) tb="$tb epoc-pei-arm.lo peigen.lo cofflink.lo " ;;
+ arm_epoc_pei_big_vec) tb="$tb epoc-pei-arm.lo peigen.lo cofflink.lo " ;;
aout0_big_vec) tb="$tb aout0.lo aout32.lo" ;;
aout_arm_big_vec) tb="$tb aout-arm.lo aout32.lo" ;;
aout_arm_little_vec) tb="$tb aout-arm.lo aout32.lo" ;;
apollocoff_vec) tb="$tb coff-apollo.lo" ;;
b_out_vec_big_host) tb="$tb bout.lo aout32.lo" ;;
b_out_vec_little_host) tb="$tb bout.lo aout32.lo" ;;
+ bfd_efi_app_ia32_vec) tb="$tb efi-app-ia32.lo peigen.lo cofflink.lo" ;;
+ bfd_efi_app_ia64_vec) tb="$tb efi-app-ia64.lo peigen.lo cofflink.lo"
+ target64=true ;;
bfd_elf64_alpha_vec) tb="$tb elf64-alpha.lo elf64.lo $elf"
target64=true ;;
-# start-sanitize-arc
+ bfd_elf64_hppa_vec) tb="$tb elf64-hppa.lo elf64.lo $elf"
+ target64=true ;;
+ bfd_elf64_ia64_little_vec) tb="$tb elf64-ia64.lo elf64.lo $elf"
+ target64=true ;;
+ bfd_elf64_ia64_big_vec) tb="$tb elf64-ia64.lo elf64.lo $elf"
+ target64=true ;;
+ bfd_elf32_ia64_big_vec) tb="$tb elf32-ia64.lo elf32.lo $elf" ;;
+ bfd_elf32_avr_vec) tb="$tb elf32-avr.lo elf32.lo $elf" ;;
bfd_elf32_littlearc_vec) tb="$tb elf32-arc.lo elf32.lo $elf" ;;
+ bfd_elf32_littlearm_vec) tb="$tb elfarm-nabi.lo elf32.lo $elf" ;;
+ bfd_elf32_littlearm_oabi_vec) tb="$tb elfarm-oabi.lo elf32.lo $elf" ;;
bfd_elf32_bigarc_vec) tb="$tb elf32-arc.lo elf32.lo $elf" ;;
-# end-sanitize-arc
+ bfd_elf32_bigarm_vec) tb="$tb elfarm-nabi.lo elf32.lo $elf" ;;
+ bfd_elf32_bigarm_oabi_vec) tb="$tb elfarm-oabi.lo elf32.lo $elf" ;;
bfd_elf32_big_generic_vec) tb="$tb elf32-gen.lo elf32.lo $elf" ;;
bfd_elf32_bigmips_vec) tb="$tb elf32-mips.lo elf32.lo $elf ecofflink.lo" ;;
bfd_elf64_bigmips_vec) tb="$tb elf64-mips.lo elf64.lo elf32-mips.lo elf32.lo $elf ecofflink.lo"
target64=true ;;
+ bfd_elf32_cris_vec) tb="$tb elf32-cris.lo elf32.lo $elf" ;;
+ bfd_elf32_us_cris_vec) tb="$tb elf32-cris.lo elf32.lo $elf" ;;
bfd_elf32_d10v_vec) tb="$tb elf32-d10v.lo elf32.lo $elf" ;;
-# start-sanitize-d30v
bfd_elf32_d30v_vec) tb="$tb elf32-d30v.lo elf32.lo $elf" ;;
-# end-sanitize-d30v
+ bfd_elf32_fr30_vec) tb="$tb elf32-fr30.lo elf32.lo $elf" ;;
bfd_elf32_hppa_vec) tb="$tb elf32-hppa.lo elf32.lo $elf" ;;
+ bfd_elf32_i370_vec) tb="$tb elf32-i370.lo elf32.lo $elf" ;;
bfd_elf32_i386_vec) tb="$tb elf32-i386.lo elf32.lo $elf" ;;
bfd_elf32_i860_vec) tb="$tb elf32-i860.lo elf32.lo $elf" ;;
+ bfd_elf32_i860_little_vec) tb="$tb elf32-i860.lo elf32.lo $elf" ;;
+ bfd_elf32_i960_vec) tb="$tb elf32-i960.lo elf32.lo $elf" ;;
bfd_elf32_little_generic_vec) tb="$tb elf32-gen.lo elf32.lo $elf" ;;
bfd_elf32_littlemips_vec) tb="$tb elf32-mips.lo elf32.lo $elf ecofflink.lo" ;;
bfd_elf64_littlemips_vec) tb="$tb elf64-mips.lo elf64.lo elf32-mips.lo elf32.lo $elf ecofflink.lo"
target64=true ;;
bfd_elf32_m32r_vec) tb="$tb elf32-m32r.lo elf32.lo $elf" ;;
+ bfd_elf32_m68hc11_vec) tb="$tb elf32-m68hc11.lo elf32.lo $elf" ;;
+ bfd_elf32_m68hc12_vec) tb="$tb elf32-m68hc12.lo elf32.lo $elf" ;;
bfd_elf32_m68k_vec) tb="$tb elf32-m68k.lo elf32.lo $elf" ;;
bfd_elf32_m88k_vec) tb="$tb elf32-m88k.lo elf32.lo $elf" ;;
+ bfd_elf32_mcore_big_vec) tb="$tb elf32-mcore.lo elf32.lo $elf" ;;
+ bfd_elf32_mcore_little_vec) tb="$tb elf32-mcore.lo elf32.lo $elf" ;;
bfd_elf32_mn10200_vec) tb="$tb elf-m10200.lo elf32.lo $elf" ;;
bfd_elf32_mn10300_vec) tb="$tb elf-m10300.lo elf32.lo $elf" ;;
+ bfd_elf32_pj_vec) tb="$tb elf32-pj.lo elf32.lo $elf";;
+ bfd_elf32_pjl_vec) tb="$tb elf32-pj.lo elf32.lo $elf";;
bfd_elf32_powerpc_vec) tb="$tb elf32-ppc.lo elf32.lo $elf" ;;
bfd_elf32_powerpcle_vec) tb="$tb elf32-ppc.lo elf32.lo $elf" ;;
bfd_elf32_sh_vec) tb="$tb elf32-sh.lo elf32.lo $elf coff-sh.lo" ;;
bfd_elf32_shl_vec) tb="$tb elf32-sh.lo elf32.lo $elf coff-sh.lo" ;;
+ bfd_elf32_shlin_vec) tb="$tb elf32-sh-lin.lo elf32.lo $elf coff-sh.lo cofflink.lo" ;;
+ bfd_elf32_shblin_vec) tb="$tb elf32-sh-lin.lo elf32.lo $elf coff-sh.lo cofflink.lo" ;;
bfd_elf32_sparc_vec) tb="$tb elf32-sparc.lo elf32.lo $elf" ;;
-# start-sanitize-v850
+ bfd_elf32_tradbigmips_vec) tb="$tb elf32-mips.lo elf32.lo $elf ecofflink.lo" ;;
+ bfd_elf32_tradlittlemips_vec) tb="$tb elf32-mips.lo elf32.lo $elf ecofflink.lo" ;;
bfd_elf32_v850_vec) tb="$tb elf32-v850.lo elf32.lo $elf" ;;
-# end-sanitize-v850
bfd_elf64_big_generic_vec) tb="$tb elf64-gen.lo elf64.lo $elf"
target64=true ;;
bfd_elf64_little_generic_vec) tb="$tb elf64-gen.lo elf64.lo $elf"
target64=true ;;
bfd_elf64_sparc_vec) tb="$tb elf64-sparc.lo elf64.lo $elf"
target64=true ;;
- cisco_core_vec) tb="$tb cisco-core.lo" ;;
+ cisco_core_big_vec) tb="$tb cisco-core.lo" ;;
+ cisco_core_little_vec) tb="$tb cisco-core.lo" ;;
+ cris_aout_vec) tb="$tb aout-cris.lo" ;;
demo_64_vec) tb="$tb demo64.lo aout64.lo"
target64=true ;;
ecoff_big_vec) tb="$tb coff-mips.lo ecoff.lo ecofflink.lo" ;;
ecoffalpha_little_vec) tb="$tb coff-alpha.lo ecoff.lo ecofflink.lo"
target64=true ;;
go32coff_vec) tb="$tb coff-go32.lo cofflink.lo" ;;
- go32stubbedcoff_vec) tb="$tb coff-stubgo32.lo cofflink.lo" ;;
- evax_alpha_vec) tb="$tb evax-alpha.lo evax-emh.lo evax-egsd.lo evax-etir.lo evax-misc.lo"
- target64=true ;;
+ go32stubbedcoff_vec) tb="$tb coff-stgo32.lo cofflink.lo" ;;
h8300coff_vec) tb="$tb coff-h8300.lo reloc16.lo" ;;
h8500coff_vec) tb="$tb coff-h8500.lo reloc16.lo" ;;
host_aout_vec) tb="$tb host-aout.lo aout32.lo" ;;
i386dynix_vec) tb="$tb i386dynix.lo aout32.lo" ;;
i386freebsd_vec) tb="$tb i386freebsd.lo aout32.lo" ;;
i386msdos_vec) tb="$tb i386msdos.lo" ;;
- i386pe_vec) tb="$tb pe-i386.lo cofflink.lo " ;;
- i386pei_vec) tb="$tb pei-i386.lo cofflink.lo" ;;
+ i386pe_vec) tb="$tb pe-i386.lo peigen.lo cofflink.lo" ;;
+ i386pei_vec) tb="$tb pei-i386.lo peigen.lo cofflink.lo" ;;
i386linux_vec) tb="$tb i386linux.lo aout32.lo" ;;
i386lynx_aout_vec) tb="$tb i386lynx.lo lynx-core.lo aout32.lo" ;;
i386lynx_coff_vec) tb="$tb cf-i386lynx.lo cofflink.lo lynx-core.lo" ;;
m68kaux_coff_vec) tb="$tb coff-aux.lo coff-m68k.lo cofflink.lo" ;;
m68ksysvcoff_vec) tb="$tb coff-svm68k.lo cofflink.lo" ;;
m88kbcs_vec) tb="$tb coff-m88k.lo" ;;
+ mipslpe_vec) tb="$tb pe-mips.lo peigen.lo cofflink.lo" ;;
+ mipslpei_vec) tb="$tb pei-mips.lo peigen.lo cofflink.lo" ;;
+ mcore_pe_big_vec) tb="$tb pe-mcore.lo peigen.lo cofflink.lo" ;;
+ mcore_pe_little_vec) tb="$tb pe-mcore.lo peigen.lo cofflink.lo" ;;
+ mcore_pei_big_vec) tb="$tb pei-mcore.lo peigen.lo cofflink.lo" ;;
+ mcore_pei_little_vec) tb="$tb pei-mcore.lo peigen.lo cofflink.lo" ;;
newsos3_vec) tb="$tb newsos3.lo aout32.lo" ;;
nlm32_i386_vec) tb="$tb nlm32-i386.lo nlm32.lo nlm.lo" ;;
+ rs6000coff64_vec) tb="$tb coff64-rs6000.lo xcofflink.lo"
+ target64=true ;;
nlm32_sparc_vec) tb="$tb nlm32-sparc.lo nlm32.lo nlm.lo" ;;
nlm32_alpha_vec) tb="$tb nlm32-alpha.lo nlm32.lo nlm.lo"
target64=true ;;
pc532machaout_vec) tb="$tb pc532-mach.lo aout-ns32k.lo" ;;
pmac_xcoff_vec) tb="$tb coff-pmac.lo xcofflink.lo" ;;
rs6000coff_vec) tb="$tb coff-rs6000.lo xcofflink.lo" ;;
- bfd_powerpc_pe_vec) tb="$tb pe-ppc.lo cofflink.lo" ;;
- bfd_powerpcle_pe_vec) tb="$tb pe-ppc.lo cofflink.lo" ;;
- bfd_powerpc_pei_vec) tb="$tb pei-ppc.lo cofflink.lo" ;;
- bfd_powerpcle_pei_vec) tb="$tb pei-ppc.lo cofflink.lo" ;;
+ bfd_powerpc_pe_vec) tb="$tb pe-ppc.lo peigen.lo cofflink.lo" ;;
+ bfd_powerpcle_pe_vec) tb="$tb pe-ppc.lo peigen.lo cofflink.lo" ;;
+ bfd_powerpc_pei_vec) tb="$tb pei-ppc.lo peigen.lo cofflink.lo" ;;
+ bfd_powerpcle_pei_vec) tb="$tb pei-ppc.lo peigen.lo cofflink.lo" ;;
ppcboot_vec) tb="$tb ppcboot.lo" ;;
shcoff_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
shlcoff_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
+ shcoff_small_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
+ shlcoff_small_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
+ shlpe_vec) tb="$tb pe-sh.lo coff-sh.lo peigen.lo cofflink.lo" ;;
+ shlpei_vec) tb="$tb pei-sh.lo coff-sh.lo peigen.lo cofflink.lo" ;;
som_vec) tb="$tb som.lo" ;;
sparcle_aout_vec) tb="$tb aout-sparcle.lo aout32.lo" ;;
- sparclinux_vec) tb="$tb sparclinux.lo aout32.lo stab-syms.lo" ;;
+ sparclinux_vec) tb="$tb sparclinux.lo aout32.lo" ;;
sparclynx_aout_vec) tb="$tb sparclynx.lo lynx-core.lo aout32.lo" ;;
sparclynx_coff_vec) tb="$tb cf-sparclynx.lo lynx-core.lo" ;;
sparcnetbsd_vec) tb="$tb sparcnetbsd.lo aout32.lo" ;;
sunos_big_vec) tb="$tb sunos.lo aout32.lo" ;;
symbolsrec_vec) tb="$tb srec.lo" ;;
tekhex_vec) tb="$tb tekhex.lo" ;;
-# start-sanitize-tic80
+ tic30_aout_vec) tb="$tb aout-tic30.lo" ;;
+ tic30_coff_vec) tb="$tb coff-tic30.lo" ;;
+ tic54x_coff0_vec) tb="$tb coff-tic54x.lo" ;;
+ tic54x_coff0_beh_vec) tb="$tb coff-tic54x.lo" ;;
+ tic54x_coff1_vec) tb="$tb coff-tic54x.lo" ;;
+ tic54x_coff1_beh_vec) tb="$tb coff-tic54x.lo" ;;
+ tic54x_coff2_vec) tb="$tb coff-tic54x.lo" ;;
+ tic54x_coff2_beh_vec) tb="$tb coff-tic54x.lo" ;;
tic80coff_vec) tb="$tb coff-tic80.lo cofflink.lo" ;;
-# end-sanitize-tic80
+ versados_vec) tb="$tb versados.lo" ;;
+ vms_alpha_vec) tb="$tb vms.lo vms-hdr.lo vms-gsd.lo vms-tir.lo vms-misc.lo"
+ target64=true ;;
+ vms_vax_vec) tb="$tb vms.lo vms-hdr.lo vms-gsd.lo vms-tir.lo vms-misc.lo" ;;
+ w65_vec) tb="$tb coff-w65.lo reloc16.lo" ;;
we32kcoff_vec) tb="$tb coff-we32k.lo" ;;
z8kcoff_vec) tb="$tb coff-z8k.lo reloc16.lo" ;;
- w65_vec) tb="$tb coff-w65.lo reloc16.lo" ;;
- versados_vec) tb="$tb versados.lo" ;;
"") ;;
*) { echo "configure: error: *** unknown target vector $vec" 1>&2; exit 1; } ;;
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2811: checking for $ac_hdr" >&5
+echo "configure:6146: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2816 "configure"
+#line 6151 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2821: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:6156: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2850: checking for $ac_func" >&5
+echo "configure:6185: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2855 "configure"
+#line 6190 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6213: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2903: checking for working mmap" >&5
+echo "configure:6238: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 2911 "configure"
+#line 6246 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:3051: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6386: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
for ac_func in madvise mprotect
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3076: checking for $ac_func" >&5
+echo "configure:6411: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3081 "configure"
+#line 6416 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1` in
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12"
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
-trap 'rm -fr `echo "Makefile doc/Makefile bfd-in3.h:bfd-in2.h config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile doc/Makefile bfd-in3.h:bfd-in2.h po/Makefile.in:po/Make-in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
+s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@build_os@%$build_os%g
s%@CC@%$CC%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@PACKAGE@%$PACKAGE%g
s%@VERSION@%$VERSION%g
s%@ACLOCAL@%$ACLOCAL%g
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
+s%@AR@%$AR%g
s%@RANLIB@%$RANLIB%g
-s%@LD@%$LD%g
s%@LN_S@%$LN_S%g
+s%@OBJEXT@%$OBJEXT%g
+s%@EXEEXT@%$EXEEXT%g
+s%@STRIP@%$STRIP%g
s%@LIBTOOL@%$LIBTOOL%g
+s%@WARN_CFLAGS@%$WARN_CFLAGS%g
+s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
+s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
+s%@CPP@%$CPP%g
+s%@ALLOCA@%$ALLOCA%g
+s%@USE_NLS@%$USE_NLS%g
+s%@MSGFMT@%$MSGFMT%g
+s%@GMSGFMT@%$GMSGFMT%g
+s%@XGETTEXT@%$XGETTEXT%g
+s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g
+s%@CATALOGS@%$CATALOGS%g
+s%@CATOBJEXT@%$CATOBJEXT%g
+s%@DATADIRNAME@%$DATADIRNAME%g
+s%@GMOFILES@%$GMOFILES%g
+s%@INSTOBJEXT@%$INSTOBJEXT%g
+s%@INTLDEPS@%$INTLDEPS%g
+s%@INTLLIBS@%$INTLLIBS%g
+s%@INTLOBJS@%$INTLOBJS%g
+s%@POFILES@%$POFILES%g
+s%@POSUB@%$POSUB%g
+s%@INCLUDE_LOCALE_H@%$INCLUDE_LOCALE_H%g
+s%@GT_NO@%$GT_NO%g
+s%@GT_YES@%$GT_YES%g
+s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g
+s%@l@%$l%g
s%@HDEFINES@%$HDEFINES%g
-s%@AR@%$AR%g
s%@BFD_HOST_64BIT_LONG@%$BFD_HOST_64BIT_LONG%g
s%@BFD_HOST_64_BIT_DEFINED@%$BFD_HOST_64_BIT_DEFINED%g
s%@BFD_HOST_64_BIT@%$BFD_HOST_64_BIT%g
s%@BFD_HOST_U_64_BIT@%$BFD_HOST_U_64_BIT%g
s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
-s%@CPP@%$CPP%g
+s%@EXEEXT_FOR_BUILD@%$EXEEXT_FOR_BUILD%g
s%@COREFILE@%$COREFILE%g
s%@COREFLAG@%$COREFLAG%g
+s%@WIN32LDFLAGS@%$WIN32LDFLAGS%g
+s%@WIN32LIBADD@%$WIN32LIBADD%g
s%@TDEFINES@%$TDEFINES%g
s%@wordsize@%$wordsize%g
s%@all_backends@%$all_backends%g
cat >> $CONFIG_STATUS <<EOF
-CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile bfd-in3.h:bfd-in2.h"}
+CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile bfd-in3.h:bfd-in2.h po/Makefile.in:po/Make-in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
EOF
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
-
+sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile
exit 0
EOF
chmod +x $CONFIG_STATUS
projects / deliverable / binutils-gdb.git / blobdiff