-# This file is a shell script that supplies the information necessary
-# to tailor a template configure script into the configure script
-# appropriate for this directory. For more information, check any
-# existing configure script.
-
-configdirs="doc"
-srctrigger=libbfd.c
-srcname="BFD"
-target_dependent=true
-
-# per-host:
-
-case "${host}" in
-# WHEN ADDING ENTRIES TO THIS MATRIX:
-# Make sure that the left side always has two dashes. Otherwise you
-# can get spurious matches. Even for unambiguous cases, do this as a
-# convention, else the table becomes a real mess to understand and maintain.
-#
-# Note that these entries cannot be fully alphabetical. Don't try.
-# The order of matching is critical when multiple lines could match.
-
-a29k-*-*) my_host=ultra3 ;;
-
-hppa*-hp-hpux) my_host=hppahpux ;;
-hppa*-hp-bsd) my_host=hppabsd ;;
-
-i[34]86-*-bsd) my_host=i386bsd ;;
-i[34]86-ncr*-sysv4*) my_host=ncr3000 ;;
-i[34]86-*-go32) my_host=go32 ;;
-i[34]86-*-sysv4*) my_host=i386v4 ;;
-i[34]86-*-sysv*) my_host=i386v ;;
-i[34]86-*-solaris*) my_host=i386v ;;
-i[34]86-*-sco*) my_host=i386v ;;
-i[34]86-*-mach*) my_host=i386mach ;;
-i[34]86-*-msdos*) my_host=dose ;;
-i[34]86-*-linux) my_host=i386linux ;;
-
-i860-*-*) my_host=stratus ;;
-
-mips-dec-*) my_host=decstation ;;
-mips-sgi-irix3) my_host=irix3 ;;
-mips-sgi-irix4) my_host=irix4 ;;
-
-m68*-cbm-amigados) my_host=amigados ;;
-m68*-cbm-sysv4*) my_host=amix ;;
-m68*-hp-hpux) my_host=hp300 ;;
-m68*-hp-bsd) my_host=hp300bsd ;;
-m68*-sony-*) my_host=news ;;
-m68*-sun-*) my_host=sun3 ;;
-m68*-apollo*-sysv*) my_host=apollov68 ;;
-m68*-apollo*-bsd*) my_host=apollo68 ;;
-
-m88k-motorola-*) my_host=delta88 ;;
-m88k-harris-*) my_host=harris ;;
-m88k-*-dgux) my_host=dgux ;;
-
-romp-*-*) my_host=rtbsd ;;
-
-rs6000-*-*) my_host=rs6000 ;;
-
-sparc-*-sunos64) my_host=sparc-ll ;;
-sparc-*-sysv4*) my_host=sysv4 ;;
-sparc-*-solaris2*) my_host=solaris2 ;;
-sparc-*-sysv64) my_host=sysv4-ll ;;
-sparc-*-*) my_host=sparc ;;
-
-tahoe-*-*) my_host=tahoe ;;
-
-vax-*-ultrix*) my_host=vaxult ;;
-vax-*-*) my_host=vaxbsd ;;
-
-we32k-*-*) my_host=we32k ;;
+dnl Process this file with autoconf to produce a configure script.
+dnl
+AC_PREREQ(2.3)
+AC_INIT(libbfd.c)
-esac
+AC_ARG_ENABLE(64-bit-bfd,
+[ --enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)],
+[case "${enableval}" in
+ yes) want64=true ;;
+ no) want64=false ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for 64-bit-bfd option) ;;
+esac],[want64=false])dnl
+AC_ARG_ENABLE(targets,
+[ --enable-targets alternative target configurations],
+[case "${enableval}" in
+ yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
+ ;;
+ no) enable_targets= ;;
+ *) enable_targets=$enableval ;;
+esac])dnl
+AC_ARG_ENABLE(shared,
+[ --enable-shared build shared BFD library],
+[case "${enableval}" in
+ yes) shared=true ;;
+ no) shared=false ;;
+ *) AC_MSG_ERROR([bad value ${enableval} for BFD shared option]) ;;
+esac])dnl
+AC_ARG_ENABLE(commonbfdlib,
+[ --enable-commonbfdlib build shared BFD/opcodes/libiberty library],
+[case "${enableval}" in
+ yes) commonbfdlib=true ;;
+ no) commonbfdlib=false ;;
+ *) AC_MSG_ERROR([bad value ${enableval} for BFD commonbfdlib option]) ;;
+esac])dnl
+AC_ARG_WITH(mmap,
+[ --with-mmap try using mmap for BFD input files if available],
+[case "${withval}" in
+ yes) want_mmap=true ;;
+ no) want_mmap=false ;;
+ *) AC_MSG_ERROR(bad value ${withval} for BFD with-mmap option) ;;
+esac],[want_mmap=false])dnl
-# Set up to make a link between the host's include file and "sysdep.h".
-files="hosts/${my_host}.h"
-links="sysdep.h"
+AC_CONFIG_HEADER(config.h:config.in)
-if [ ! -f ${srcdir}/${files} ] ; then
- if [ -n "${my_host}" ] ; then
- echo '***' No file ${srcdir}/${files} 1>&2
- fi
- echo '***' ${srcname} does not support host ${host} 1>&2
- exit 1
+AC_CONFIG_AUX_DIR(`cd $srcdir/..;pwd`)
+AC_CANONICAL_SYSTEM
+if test -z "$target" ; then
+ AC_MSG_ERROR(Unrecognized target system type; please check config.sub.)
fi
+AC_ARG_PROGRAM
+
+host64=false
+target64=false
-host_makefile_frag=
-if [ -f ${srcdir}/config/${my_host}.mh ] ; then
- host_makefile_frag=config/${my_host}.mh
+# host stuff:
+
+ALLLIBS='$(TARGETLIB)'
+PICFLAG=
+SHLIB=
+SHLINK=
+if test "${shared}" = "true"; then
+ PICFLAG=-fpic
+ if test "${commonbfdlib}" = "true"; then
+ ALLLIBS='$(TARGETLIB)'
+ else
+ ALLLIBS='$(TARGETLIB) $(SHLIB) $(SHLINK)'
+changequote(,)dnl
+ SHLIB=libbfd.so.`sed -e 's/[^0-9]*\([0-9.]*\).*/\1/' ${srcdir}/VERSION`
+changequote([,])dnl
+ SHLINK=libbfd.so
+ fi
fi
-# per-target:
-
-# WHEN ADDING ENTRIES TO THIS MATRIX:
-# Make sure that the left side always has two dashes. Otherwise you
-# can get spurious matches. Even for unambiguous cases, do this as a
-# convention, else the table becomes a real mess to understand and maintain.
-
-case "${target}" in
- a29k-*-ebmon) bfd_target=a29k-coff ;;
- a29k-*-udi) bfd_target=a29k-coff ;;
- a29k-*-aout) bfd_target=a29k-aout ;;
- a29k-*-coff) bfd_target=a29k-coff ;;
- a29k-*-sym1) bfd_target=a29k-coff ;;
- h8300-*-*) bfd_target=h8300-coff ;;
- hppa*-*-bsd) bfd_target=hppabsd ;;
- hppa*-*-hpux) bfd_target=hppahpux ;;
- i[34]86-*-sysv4*) bfd_target=i386-elf ;;
- i[34]86-*-sysv*) bfd_target=i386-coff ;;
- i[34]86-*-sco*) bfd_target=i386-coff ;;
- i[34]86-*-bsd) bfd_target=i386-bsd ;;
- i[34]86-none-*) bfd_target=i386-coff ;;
- i960-*-vxworks) bfd_target=i960-bout ;;
- m68*-hp-bsd) bfd_target=hp300bsd ;;
- m68*-*-aout) bfd_target=m68k-aout ;;
- m68*-*-coff) bfd_target=m68k-coff ;;
- m68*-*-hpux) bfd_target=hp300 ;;
- m68*-*-os68k) bfd_target=m68k-aout ;;
- m68*-*-sunos*) bfd_target=m68k-aout ;;
- m68*-*-vxworks*) bfd_target=m68k-aout ;;
- m68*-ericsson-*) bfd_target=m68k-aout ;;
- m68*-netx-*) bfd_target=m68k-aout ;;
- m88k-*-*) bfd_target=m88k-coff ;;
- mips-big-*) bfd_target=irix3 ;;
- mips-dec-*) bfd_target=decstation ;;
- mips-sgi-*) bfd_target=irix3 ;;
- rs6000-*-*) bfd_target=rs6000 ;;
- sparc-*-solaris2*) bfd_target=sparc-elf ;;
- sparc-*-sysv4*) bfd_target=sparc-elf ;;
- sparc-*-*) bfd_target=sparc-aout ;;
- sparclite-*-*) bfd_target=sparc-aout ;;
- tahoe-*-*) bfd_target=tahoe ;;
- vax-*-*) bfd_target=vax ;;
- we32k-*-*) bfd_target=we32k ;;
- z8k*-*-*) bfd_target=z8k-coff ;;
-
- *-*-aout) bfd_target=${target_cpu}-aout ;;
- *-*-bsd) bfd_target=${target_cpu}-aout ;;
- *-*-sysv4*) bfd_target=${target_cpu}-elf ;;
- *-*-solaris2*) bfd_target=${target_cpu}-elf ;;
- *-*-go32) bfd_target=${target_cpu}-aout ;;
- *-*-linux*) bfd_target=${target_cpu}-linux ;;
- *-*-sysv*) bfd_target=${target_cpu}-coff ;;
- *-*-scosysv*) bfd_target=${target_cpu}-coff ;;
-
- *-adobe-*) bfd_target=adobe ;;
- *-sony-*) bfd_target=news ;;
- *-intel-*) bfd_target=${target_cpu}-coff ;;
- *-stratus-*) bfd_target=${target_cpu}-elf ;;
- *-cbm-*) bfd_target=${target_cpu}-elf ;;
- *-ncr-*) bfd_target=${target_cpu}-elf ;;
- *-tandem-*) bfd_target=st2000 ;;
-esac
+AC_PROG_CC
+
+# Permit host specific settings.
+. ${srcdir}/configure.host
+
+AC_SUBST(HDEFINES)
+AC_CHECK_PROG(AR, ar, ar, :)
+AC_PROG_RANLIB
+AC_PROG_INSTALL
+
+if test "${shared}" = "true"; then
+ if test "${GCC}" != "yes" && test "${shared_non_gcc}" != "yes"; then
+ AC_MSG_WARN([BFD --enable-shared only supported when using gcc])
+ shared=false
+ PICFLAG=
+ SHLIB=
+ fi
+fi
+
+AC_SUBST(ALLLIBS)
+AC_SUBST(PICFLAG)
+AC_SUBST(SHLIB)
+AC_SUBST(SHLIB_CC)
+AC_SUBST(SHLIB_CFLAGS)
+if test "${commonbfdlib}" = "true"; then
+ COMMON_SHLIB=yes
+ PICLIST=piclist
+else
+ COMMON_SHLIB=
+ PICLIST=
+fi
+AC_SUBST(COMMON_SHLIB)
+AC_SUBST(PICLIST)
+AC_SUBST(SHLINK)
+
+HOST_64BIT_LONG=0
+if test "x${HOST_64BIT_TYPE}" = "xlong"; then
+ HOST_64BIT_LONG=1
+fi
+AC_SUBST(HOST_64BIT_LONG)
+
+BFD_CC_FOR_BUILD
+
+AC_CHECK_HEADERS(stddef.h string.h strings.h stdlib.h time.h unistd.h)
+AC_CHECK_HEADERS(fcntl.h sys/file.h)
+AC_CHECK_FUNCS(fcntl getpagesize)
+
+BFD_BINARY_FOPEN
+
+BFD_NEED_DECLARATION(malloc)
+BFD_NEED_DECLARATION(free)
+
+# If we are configured native, pick a core file support file.
+COREFILE=
+COREFLAG=
+if test "${target}" = "${host}"; then
+ case "${host}" in
+ alpha*-*-linux*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/alphalinux.h")
+ ;;
+ alpha*-*-*) COREFILE=osf-core.o ;;
+ arm-*-riscix) COREFILE=trad-core.o ;;
+ hppa*-*-hpux*) COREFILE=hpux-core.o ;;
+ hppa*-*-hiux*) COREFILE=hpux-core.o ;;
+ hppa*-*-bsd*) COREFILE="hpux-core.o hppabsd-core.o"
+ COREFLAG="-DHPUX_CORE -DHPPABSD_CORE" ;;
+changequote(,)dnl
+ i[345]86-sequent-bsd*)
+changequote([,])dnl
+ COREFILE=trad-core.o;
+ AC_DEFINE(TRAD_HEADER,"hosts/symmetry.h")
+ ;;
+changequote(,)dnl
+ i[345]86-sequent-sysv4*) ;;
+ i[345]86-sequent-sysv*)
+changequote([,])dnl
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/symmetry.h")
+ ;;
+changequote(,)dnl
+ i[345]86-*-bsd* | i[345]86-*-freebsd*)
+changequote([,])dnl
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/i386bsd.h")
+ ;;
+changequote(,)dnl
+ i[345]86-*-netbsd*)
+changequote([,])dnl
+ COREFILE=netbsd-core.o
+ ;;
+changequote(,)dnl
+ i[345]86-esix-sysv3*)
+changequote([,])dnl
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/esix.h")
+ ;;
+changequote(,)dnl
+ i[345]86-*-sco* | i[345]86-*-isc*)
+changequote([,])dnl
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/i386sco.h")
+ ;;
+changequote(,)dnl
+ i[345]86-*-mach3*)
+changequote([,])dnl
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/i386mach3.h")
+ ;;
+changequote(,)dnl
+ i[345]86-*-linux*)
+changequote([,])dnl
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/i386linux.h")
+ ;;
+changequote(,)dnl
+ i[345]86-*-isc*) COREFILE=trad-core.o ;;
+ i[345]86-*-aix*) COREFILE=aix386-core.o ;;
+changequote([,])dnl
+ i860-*-mach3* | i860-*-osf1*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/i860mach3.h")
+ ;;
+ mips-dec-bsd*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/mipsbsd.h")
+ ;;
+ mips-dec-mach3*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/mipsmach3.h")
+ ;;
+ mips-*-netbsd*)
+ COREFILE=netbsd-core.o
+ ;;
+ mips-dec-*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/decstation.h")
+ ;;
+ mips-sgi-irix4*) COREFILE=irix-core.o ;;
+ mips-sgi-irix5*) COREFILE=irix-core.o ;;
+ mips-*-mach3*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/mipsmach3.h")
+ ;;
+ mips-*-sysv4*) ;;
+ mips-*-sysv* | mips-*-riscos*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/riscos.h")
+ ;;
+ mips-sony-bsd*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/news-mips".h)
+ ;;
+ m68*-bull*-sysv*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/dpx2.h")
+ ;;
+ m68*-hp-hpux*) COREFILE=hpux-core.o ;;
+ m68*-hp-bsd*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/hp300bsd.h")
+ ;;
+ m68*-*-linux*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/m68klinux.h")
+ ;;
+ m68*-motorola-sysv*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER, "hosts/delta68.h")
+ ;;
+ m68*-sony-*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/news.h")
+ ;;
+ m68*-*-netbsd*)
+ COREFILE=netbsd-core.o
+ ;;
+ m68*-apple-aux*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/m68kaux.h")
+ ;;
+ m88*-*-sysv4*) ;;
+ m88*-motorola-sysv*) COREFILE=ptrace-core.o ;;
+ m88*-*-mach3*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/m88kmach3.h")
+ ;;
+ ns32k-pc532-mach)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/pc532mach.h")
+ ;;
+ ns32k-*-netbsd*)
+ COREFILE=netbsd-core.o
+ ;;
+ rs6000-*-lynx*) COREFILE=lynx-core.o ;;
+ rs6000-*-aix4*) COREFILE=rs6000-core.o ;;
+ rs6000-*-*) COREFILE=rs6000-core.o ;;
+ powerpc-*-aix4*) COREFILE=rs6000-core.o ;;
+ powerpc-*-aix*) COREFILE=rs6000-core.o ;;
+ sparc-*-netbsd*)
+ COREFILE=netbsd-core.o
+ ;;
+ tahoe-*-*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/tahoe.h")
+ ;;
+ vax-*-ultrix2*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/vaxult2.h")
+ ;;
+ vax-*-ultrix*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/vaxult2.h")
+ ;;
+ vax-*-*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/vaxbsd.h")
+ ;;
+ esac
+
+ case "$COREFILE" in
+ aix386-core.o) COREFLAG=-DAIX386_CORE ;;
+ hppabsd-core.o) COREFLAG=-DHPPABSD_CORE ;;
+ hpux-core.o) COREFLAG=-DHPUX_CORE ;;
+ irix-core.o) COREFLAG=-DIRIX_CORE ;;
+ lynx-core.o) COREFLAG=-DLYNX_CORE ;;
+ osf-core.o) COREFLAG=-DOSF_CORE ;;
+ ptrace-core.o) COREFLAG=-DPTRACE_CORE ;;
+ rs6000-core.o) COREFLAG="$COREFLAG -DAIX_CORE" ;;
+ trad-core.o) COREFLAG="$COREFLAG -DTRAD_CORE" ;;
+ esac
+
+ # The ELF code uses the native <sys/procfs.h> to handle core files.
+ # Define HAVE_SYS_PROCFS_H if the file exists and defines
+ # prstatus_t.
+ AC_MSG_CHECKING([for sys/procfs.h])
+ AC_CACHE_VAL(bfd_cv_header_sys_procfs_h,
+ [AC_TRY_COMPILE([#include <sys/procfs.h>],
+ [prstatus_t t;],
+ bfd_cv_header_sys_procfs_h=yes, bfd_cv_header_sys_procfs_h=no)])
+ AC_MSG_RESULT($bfd_cv_header_sys_procfs_h)
+ if test $bfd_cv_header_sys_procfs_h = yes; then
+ AC_DEFINE(HAVE_SYS_PROCFS_H)
+ fi
+
+fi
+AC_SUBST(COREFILE)
+AC_SUBST(COREFLAG)
-if [ ! -f ${srcdir}/config/${bfd_target}.mt ] ; then
- if [ -n "${bfd_target}" ] ; then
- echo '***' No file ${srcdir}/config/${bfd_target}.mt 1>&2
+# target stuff:
+
+# Canonicalize the secondary target names.
+if test -n "$enable_targets" ; then
+ for targ in `echo $enable_targets | sed 's/,/ /g'`
+ do
+ result=`$ac_config_sub $targ 2>/dev/null`
+ if test -n "$result" ; then
+ canon_targets="$canon_targets $result"
+ else
+ # Allow targets that config.sub doesn't recognize, like "all".
+ canon_targets="$canon_targets $targ"
fi
- echo '***' BFD does not support target ${target} 1>&2
- echo '***' Look in bfd/configure.in for supported targets 1>&2
- exit 1
+ done
fi
-target_makefile_frag=config/${bfd_target}.mt
-# We don't do any links based on the target system, just very minor makefile
-# config.
+all_targets=false
+defvec=
+selvecs=
+selarchs=
+TDEFINES=
+for targ in $target $canon_targets
+do
+ if test "x$targ" = "xall"; then
+ all_targets=true
+ else
+ . $srcdir/config.bfd
+ if test "x$targ" = "x$target"; then
+ defvec=$targ_defvec
+ fi
+ selvecs="$selvecs $targ_defvec $targ_selvecs"
+ selarchs="$selarchs $targ_archs"
+ TDEFINES="$TDEFINES $targ_cflags"
+ fi
+done
+AC_SUBST(TDEFINES)
+
+# This processing still needs to be done if we're to decide properly whether
+# 64-bit support needs to be compiled in. Currently, it will be included if
+# the default or any other explicitly requested target requires it; it
+# will not be included on a 32-bit host if no 64-bit target is requested, and
+# no "--with-64-bit-bfd" option is given, even if "--with-targets=all" is
+# used.
+
+# uniq the default and selected vectors in all the configured targets.
+f=""
+for i in $selvecs ; do
+ case " $f " in
+ *" $i "*) ;;
+ *) f="$f $i" ;;
+ esac
+done
+selvecs="$f"
+
+# uniq the architectures in all the configured targets.
+f=""
+for i in $selarchs ; do
+ case " $f " in
+ *" $i "*) ;;
+ *) f="$f $i" ;;
+ esac
+done
+selarchs="$f"
+
+# Target backend .o files.
+tb=
+
+elf="elf.o elflink.o"
+
+for vec in $selvecs
+do
+ case "$vec" in
+ # This list is alphabetized to make it easy to compare
+ # with the two vector lists in targets.c.
+ a29kcoff_big_vec) tb="$tb coff-a29k.o cofflink.o" ;;
+ a_out_adobe_vec) tb="$tb aout-adobe.o aout32.o stab-syms.o" ;;
+ armcoff_little_vec) tb="$tb coff-arm.o cofflink.o " ;;
+ armcoff_big_vec) tb="$tb coff-arm.o cofflink.o " ;;
+ armpe_little_vec) tb="$tb pe-arm.o cofflink.o " ;;
+ armpe_big_vec) tb="$tb pe-arm.o cofflink.o " ;;
+ armpei_little_vec) tb="$tb pei-arm.o cofflink.o " ;;
+ armpei_big_vec) tb="$tb pei-arm.o cofflink.o " ;;
+ aout0_big_vec) tb="$tb aout0.o aout32.o stab-syms.o" ;;
+ aout_arm_big_vec) tb="$tb aout-arm.o aout32.o stab-syms.o" ;;
+ aout_arm_little_vec) tb="$tb aout-arm.o aout32.o stab-syms.o" ;;
+ aout_mips_big_vec) tb="$tb mipsbsd.o aout32.o stab-syms.o" ;;
+ aout_mips_little_vec) tb="$tb mipsbsd.o aout32.o stab-syms.o" ;;
+ apollocoff_vec) tb="$tb coff-apollo.o" ;;
+ b_out_vec_big_host) tb="$tb bout.o aout32.o stab-syms.o" ;;
+ b_out_vec_little_host) tb="$tb bout.o aout32.o stab-syms.o" ;;
+# start-sanitize-arc
+ bfd_elf32_littlearc_vec) tb="$tb elf32-arc.o elf32.o $elf" ;;
+ bfd_elf32_bigarc_vec) tb="$tb elf32-arc.o elf32.o $elf" ;;
+# end-sanitize-arc
+ bfd_elf32_big_generic_vec) tb="$tb elf32-gen.o elf32.o $elf" ;;
+ bfd_elf32_bigmips_vec) tb="$tb elf32-mips.o elf32.o $elf ecofflink.o" ;;
+ bfd_elf32_hppa_vec) tb="$tb elf32-hppa.o elf32.o $elf" ;;
+ bfd_elf32_i386_vec) tb="$tb elf32-i386.o elf32.o $elf" ;;
+ bfd_elf32_i860_vec) tb="$tb elf32-i860.o elf32.o $elf" ;;
+ bfd_elf32_little_generic_vec) tb="$tb elf32-gen.o elf32.o $elf" ;;
+ bfd_elf32_littlemips_vec) tb="$tb elf32-mips.o elf32.o $elf ecofflink.o" ;;
+ bfd_elf32_m68k_vec) tb="$tb elf32-m68k.o elf32.o $elf" ;;
+ bfd_elf32_m88k_vec) tb="$tb elf32-m88k.o elf32.o $elf" ;;
+ bfd_elf32_powerpc_vec) tb="$tb elf32-ppc.o elf32.o $elf" ;;
+ bfd_elf32_powerpcle_vec) tb="$tb elf32-ppc.o elf32.o $elf" ;;
+ bfd_elf32_sparc_vec) tb="$tb elf32-sparc.o elf32.o $elf" ;;
+ bfd_elf64_big_generic_vec) tb="$tb elf64-gen.o elf64.o $elf"
+ target64=true ;;
+ bfd_elf64_little_generic_vec) tb="$tb elf64-gen.o elf64.o $elf"
+ target64=true ;;
+ bfd_elf64_sparc_vec) tb="$tb elf64-sparc.o elf64.o $elf"
+ target64=true ;;
+ cisco_core_vec) tb="$tb cisco-core.o" ;;
+ demo_64_vec) tb="$tb demo64.o aout64.o stab-syms.o"
+ target64=true ;;
+ ecoff_big_vec) tb="$tb coff-mips.o ecoff.o ecofflink.o" ;;
+ ecoff_little_vec) tb="$tb coff-mips.o ecoff.o ecofflink.o" ;;
+ ecoffalpha_little_vec) tb="$tb coff-alpha.o ecoff.o ecofflink.o"
+ target64=true ;;
+ h8300coff_vec) tb="$tb coff-h8300.o reloc16.o" ;;
+ h8500coff_vec) tb="$tb coff-h8500.o reloc16.o" ;;
+ host_aout_vec) tb="$tb host-aout.o aout32.o stab-syms.o" ;;
+ hp300bsd_vec) tb="$tb hp300bsd.o aout32.o stab-syms.o" ;;
+ hp300hpux_vec) tb="$tb hp300hpux.o aout32.o stab-syms.o" ;;
+ i386aout_vec) tb="$tb i386aout.o aout32.o stab-syms.o" ;;
+ i386bsd_vec) tb="$tb i386bsd.o aout32.o stab-syms.o" ;;
+ i386coff_vec) tb="$tb coff-i386.o cofflink.o" ;;
+ i386dynix_vec) tb="$tb i386dynix.o aout32.o stab-syms.o" ;;
+ i386freebsd_vec) tb="$tb i386freebsd.o aout32.o stab-syms.o" ;;
+ i386msdos_vec) tb="$tb i386msdos.o" ;;
+ i386pe_vec) tb="$tb pe-i386.o cofflink.o " ;;
+ i386pei_vec) tb="$tb pei-i386.o cofflink.o" ;;
+ i386linux_vec) tb="$tb i386linux.o aout32.o stab-syms.o" ;;
+ i386lynx_aout_vec) tb="$tb i386lynx.o lynx-core.o aout32.o stab-syms.o" ;;
+ i386lynx_coff_vec) tb="$tb cf-i386lynx.o cofflink.o lynx-core.o stab-syms.o" ;;
+ i386mach3_vec) tb="$tb i386mach3.o aout32.o stab-syms.o" ;;
+ i386netbsd_vec) tb="$tb i386netbsd.o aout32.o stab-syms.o" ;;
+ i386os9k_vec) tb="$tb i386os9k.o aout32.o stab-syms.o" ;;
+ i860coff_vec) tb="$tb coff-i860.o cofflink.o" ;;
+ icoff_big_vec) tb="$tb coff-i960.o cofflink.o" ;;
+ icoff_little_vec) tb="$tb coff-i960.o cofflink.o" ;;
+ ieee_vec) tb="$tb ieee.o" ;;
+ m68kcoff_vec) tb="$tb coff-m68k.o cofflink.o" ;;
+ m68kcoffun_vec) tb="$tb coff-u68k.o coff-m68k.o cofflink.o" ;;
+ m68klinux_vec) tb="$tb m68klinux.o aout32.o stab-syms.o" ;;
+ m68klynx_aout_vec) tb="$tb m68klynx.o lynx-core.o aout32.o stab-syms.o" ;;
+ m68klynx_coff_vec) tb="$tb cf-m68klynx.o coff-m68k.o cofflink.o lynx-core.o stab-syms.o" ;;
+ m68knetbsd_vec) tb="$tb m68knetbsd.o aout32.o stab-syms.o" ;;
+ m68k4knetbsd_vec) tb="$tb m68k4knetbsd.o aout32.o stab-syms.o" ;;
+ m68kaux_coff_vec) tb="$tb coff-aux.o coff-m68k.o cofflink.o" ;;
+ m88kbcs_vec) tb="$tb coff-m88k.o" ;;
+ newsos3_vec) tb="$tb newsos3.o aout32.o stab-syms.o" ;;
+ nlm32_i386_vec) tb="$tb nlm32-i386.o nlm32.o nlm.o" ;;
+ nlm32_sparc_vec) tb="$tb nlm32-sparc.o nlm32.o nlm.o" ;;
+ nlm32_alpha_vec) tb="$tb nlm32-alpha.o nlm32.o nlm.o"
+ target64=true ;;
+ riscix_vec) tb="$tb aout32.o riscix.o stab-syms.o" ;;
+ nlm32_powerpc_vec) tb="$tb nlm32-ppc.o nlm32.o nlm.o" ;;
+ pc532netbsd_vec) tb="$tb ns32knetbsd.o aout-ns32k.o stab-syms.o" ;;
+ pc532machaout_vec) tb="$tb pc532-mach.o aout-ns32k.o stab-syms.o" ;;
+ pmac_xcoff_vec) tb="$tb coff-pmac.o xcofflink.o" ;;
+ rs6000coff_vec) tb="$tb coff-rs6000.o xcofflink.o" ;;
+ bfd_powerpc_pe_vec) tb="$tb pe-ppc.o cofflink.o" ;;
+ bfd_powerpcle_pe_vec) tb="$tb pe-ppc.o cofflink.o" ;;
+ bfd_powerpc_pei_vec) tb="$tb pei-ppc.o cofflink.o" ;;
+ bfd_powerpcle_pei_vec) tb="$tb pei-ppc.o cofflink.o" ;;
+ shcoff_vec) tb="$tb coff-sh.o cofflink.o" ;;
+# start-sanitize-rce
+ rce_aout_vec) tb="$tb aout-rce.o aout32.o stab-syms.o" ;;
+# end-sanitize-rce
+ shlcoff_vec) tb="$tb coff-sh.o cofflink.o" ;;
+ som_vec) tb="$tb som.o" ;;
+ sparclynx_aout_vec) tb="$tb sparclynx.o lynx-core.o aout32.o stab-syms.o" ;;
+ sparclynx_coff_vec) tb="$tb cf-sparclynx.o lynx-core.o stab-syms.o" ;;
+ sparcnetbsd_vec) tb="$tb sparcnetbsd.o aout32.o stab-syms.o" ;;
+ sparccoff_vec) tb="$tb coff-sparc.o" ;;
+ srec_vec) tb="$tb srec.o" ;;
+ sunos_big_vec) tb="$tb sunos.o aout32.o stab-syms.o" ;;
+ symbolsrec_vec) tb="$tb srec.o" ;;
+ tekhex_vec) tb="$tb tekhex.o" ;;
+ we32kcoff_vec) tb="$tb coff-we32k.o" ;;
+ z8kcoff_vec) tb="$tb coff-z8k.o reloc16.o" ;;
+ w65_vec) tb="$tb coff-w65.o reloc16.o" ;;
+ versados_vec) tb="$tb versados.o" ;;
+
+ "") ;;
+ *) AC_MSG_ERROR(*** unknown target vector $vec) ;;
+ esac
+done
+
+# Target architecture .o files.
+ta=`echo $selarchs | sed -e s/bfd_/cpu-/g -e s/_arch/.o/g`
+
+# Weed out duplicate .o files.
+f=""
+for i in $tb ; do
+ case " $f " in
+ *" $i "*) ;;
+ *) f="$f $i" ;;
+ esac
+done
+tb="$f"
+
+f=""
+for i in $ta ; do
+ case " $f " in
+ *" $i "*) ;;
+ *) f="$f $i" ;;
+ esac
+done
+ta="$f"
+
+bfd_backends="$tb"
+bfd_machines="$ta"
+
+if test x${all_targets} = xtrue ; then
+ bfd_backends="${bfd_backends}"' $(ALL_BACKENDS)'
+ bfd_machines="${bfd_machines}"' $(ALL_MACHINES)'
+ selvecs=
+ selarchs=
+else # all_targets is true
+ # Only set these if they will be nonempty, for the clever echo.
+ test -n "$selvecs" &&
+ selvecs=`echo $selvecs | sed -e 's/^/\&/' -e 's/ \(.\)/,\&\1/g'`
+ test -n "$selarchs" &&
+ selarchs=`echo $selarchs | sed -e 's/^/\&/' -e 's/ \(.\)/,\&\1/g'`
+fi # all_targets is true
+
+case ${host64}-${target64}-${want64} in
+ *true*)
+ wordsize=64
+ all_backends='$(BFD64_BACKENDS) $(BFD32_BACKENDS)'
+ ;;
+ false-false-false)
+ wordsize=32
+ all_backends='$(BFD32_BACKENDS)'
+ ;;
+esac
+
+AC_SUBST(wordsize)
+AC_SUBST(all_backends)
+AC_SUBST(bfd_backends)
+AC_SUBST(bfd_machines)
+
+tdefaults=""
+test -n "${defvec}" && tdefaults="${tdefaults} -DDEFAULT_VECTOR=${defvec}"
+test -n "${selvecs}" && tdefaults="${tdefaults} -DSELECT_VECS='${selvecs}'"
+test -n "${selarchs}" && tdefaults="${tdefaults} -DSELECT_ARCHITECTURES='${selarchs}'"
+AC_SUBST(tdefaults)
+
+dnl AC_CHECK_HEADERS(sys/mman.h)
+AC_FUNC_MMAP
+AC_CHECK_FUNCS(madvise mprotect)
+case ${want_mmap}+${ac_cv_func_mmap} in
+ true+yes ) AC_DEFINE(USE_MMAP) ;;
+esac
+
+rm -f doc/config.status
+AC_OUTPUT(Makefile doc/Makefile,
+[case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac])
projects / deliverable / binutils-gdb.git / blobdiff