/* DWARF 2 support.
Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006 Free Software Foundation, Inc.
+ 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
Adapted from gdb/dwarf2read.c by Gavin Koch of Cygnus Solutions
(gavin@cygnus.com).
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or (at
+ the Free Software Foundation; either version 3 of the License, or (at
your option) any later version.
This program is distributed in the hope that it will be useful, but
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
+ Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
+ MA 02110-1301, USA. */
-#include "bfd.h"
#include "sysdep.h"
+#include "bfd.h"
#include "libiberty.h"
#include "libbfd.h"
#include "elf-bfd.h"
bfd_byte *data;
};
-struct loadable_section
+struct adjusted_section
{
asection *section;
bfd_vma adj_vma;
/* A list of all previously read comp_units. */
struct comp_unit *all_comp_units;
+ /* Last comp unit in list above. */
+ struct comp_unit *last_comp_unit;
+
/* The next unread compilation unit within the .debug_info section.
Zero indicates that the .debug_info section has not been loaded
into a buffer yet. */
/* Pointer to the end of the .debug_info section memory buffer. */
bfd_byte *info_ptr_end;
- /* Pointer to the section and address of the beginning of the
- section. */
+ /* Pointer to the bfd, section and address of the beginning of the
+ section. The bfd might be different than expected because of
+ gnu_debuglink sections. */
+ bfd * bfd;
asection *sec;
bfd_byte *sec_info_ptr;
+ /* A pointer to the memory block allocated for info_ptr. Neither
+ info_ptr nor sec_info_ptr are guaranteed to stay pointing to the
+ beginning of the malloc block. This is used only to free the
+ memory later. */
+ bfd_byte *info_ptr_memory;
+
/* Pointer to the symbol table. */
asymbol **syms;
bfd_byte *dwarf_abbrev_buffer;
/* Length of the loaded .debug_abbrev section. */
- unsigned long dwarf_abbrev_size;
+ bfd_size_type dwarf_abbrev_size;
/* Buffer for decode_line_info. */
bfd_byte *dwarf_line_buffer;
/* Length of the loaded .debug_line section. */
- unsigned long dwarf_line_size;
+ bfd_size_type dwarf_line_size;
/* Pointer to the .debug_str section loaded into memory. */
bfd_byte *dwarf_str_buffer;
/* Length of the loaded .debug_str section. */
- unsigned long dwarf_str_size;
+ bfd_size_type dwarf_str_size;
/* Pointer to the .debug_ranges section loaded into memory. */
bfd_byte *dwarf_ranges_buffer;
/* Length of the loaded .debug_ranges section. */
- unsigned long dwarf_ranges_size;
+ bfd_size_type dwarf_ranges_size;
/* If the most recent call to bfd_find_nearest_line was given an
address in an inlined function, preserve a pointer into the
use. */
struct funcinfo *inliner_chain;
- /* Number of loadable sections. */
- unsigned int loadable_section_count;
+ /* Number of sections whose VMA we must adjust. */
+ unsigned int adjusted_section_count;
+
+ /* Array of sections with adjusted VMA. */
+ struct adjusted_section *adjusted_sections;
+
+ /* Number of times find_line is called. This is used in
+ the heuristic for enabling the info hash tables. */
+ int info_hash_count;
+
+#define STASH_INFO_HASH_TRIGGER 100
+
+ /* Hash table mapping symbol names to function infos. */
+ struct info_hash_table *funcinfo_hash_table;
- /* Array of loadable sections. */
- struct loadable_section *loadable_sections;
+ /* Hash table mapping symbol names to variable infos. */
+ struct info_hash_table *varinfo_hash_table;
+
+ /* Head of comp_unit list in the last hash table update. */
+ struct comp_unit *hash_units_head;
+
+ /* Status of info hash. */
+ int info_hash_status;
+#define STASH_INFO_HASH_OFF 0
+#define STASH_INFO_HASH_ON 1
+#define STASH_INFO_HASH_DISABLED 2
};
struct arange
/* Chain the previously read compilation units. */
struct comp_unit *next_unit;
+ /* Likewise, chain the compilation unit read after this one.
+ The comp units are stored in reversed reading order. */
+ struct comp_unit *prev_unit;
+
/* Keep the bfd convenient (for memory allocation). */
bfd *abfd;
/* Pointer to dwarf2_debug structure. */
struct dwarf2_debug *stash;
+ /* DWARF format version for this unit - from unit header. */
+ int version;
+
/* Address size for this unit - from unit header. */
unsigned char addr_size;
/* Base address for this unit - from DW_AT_low_pc attribute of
DW_TAG_compile_unit DIE */
bfd_vma base_address;
+
+ /* TRUE if symbols are cached in hash table for faster lookup by name. */
+ bfd_boolean cached;
};
/* This data structure holds the information of an abbrev. */
#define ATTR_ALLOC_CHUNK 4
#endif
+/* Variable and function hash tables. This is used to speed up look-up
+ in lookup_symbol_in_var_table() and lookup_symbol_in_function_table().
+ In order to share code between variable and function infos, we use
+ a list of untyped pointer for all variable/function info associated with
+ a symbol. We waste a bit of memory for list with one node but that
+ simplifies the code. */
+
+struct info_list_node
+{
+ struct info_list_node *next;
+ void *info;
+};
+
+/* Info hash entry. */
+struct info_hash_entry
+{
+ struct bfd_hash_entry root;
+ struct info_list_node *head;
+};
+
+struct info_hash_table
+{
+ struct bfd_hash_table base;
+};
+
+/* Function to create a new entry in info hash table. */
+
+static struct bfd_hash_entry *
+info_hash_table_newfunc (struct bfd_hash_entry *entry,
+ struct bfd_hash_table *table,
+ const char *string)
+{
+ struct info_hash_entry *ret = (struct info_hash_entry *) entry;
+
+ /* Allocate the structure if it has not already been allocated by a
+ derived class. */
+ if (ret == NULL)
+ {
+ ret = bfd_hash_allocate (table, sizeof (* ret));
+ if (ret == NULL)
+ return NULL;
+ }
+
+ /* Call the allocation method of the base class. */
+ ret = ((struct info_hash_entry *)
+ bfd_hash_newfunc ((struct bfd_hash_entry *) ret, table, string));
+
+ /* Initialize the local fields here. */
+ if (ret)
+ ret->head = NULL;
+
+ return (struct bfd_hash_entry *) ret;
+}
+
+/* Function to create a new info hash table. It returns a pointer to the
+ newly created table or NULL if there is any error. We need abfd
+ solely for memory allocation. */
+
+static struct info_hash_table *
+create_info_hash_table (bfd *abfd)
+{
+ struct info_hash_table *hash_table;
+
+ hash_table = bfd_alloc (abfd, sizeof (struct info_hash_table));
+ if (!hash_table)
+ return hash_table;
+
+ if (!bfd_hash_table_init (&hash_table->base, info_hash_table_newfunc,
+ sizeof (struct info_hash_entry)))
+ {
+ bfd_release (abfd, hash_table);
+ return NULL;
+ }
+
+ return hash_table;
+}
+
+/* Insert an info entry into an info hash table. We do not check of
+ duplicate entries. Also, the caller need to guarantee that the
+ right type of info in inserted as info is passed as a void* pointer.
+ This function returns true if there is no error. */
+
+static bfd_boolean
+insert_info_hash_table (struct info_hash_table *hash_table,
+ const char *key,
+ void *info,
+ bfd_boolean copy_p)
+{
+ struct info_hash_entry *entry;
+ struct info_list_node *node;
+
+ entry = (struct info_hash_entry*) bfd_hash_lookup (&hash_table->base,
+ key, TRUE, copy_p);
+ if (!entry)
+ return FALSE;
+
+ node = bfd_hash_allocate (&hash_table->base, sizeof (*node));
+ if (!node)
+ return FALSE;
+
+ node->info = info;
+ node->next = entry->head;
+ entry->head = node;
+
+ return TRUE;
+}
+
+/* Look up an info entry list from an info hash table. Return NULL
+ if there is none. */
+
+static struct info_list_node *
+lookup_info_hash_table (struct info_hash_table *hash_table, const char *key)
+{
+ struct info_hash_entry *entry;
+
+ entry = (struct info_hash_entry*) bfd_hash_lookup (&hash_table->base, key,
+ FALSE, FALSE);
+ return entry ? entry->head : NULL;
+}
+
+/* Read a section into its appropriate place in the dwarf2_debug
+ struct (indicated by SECTION_BUFFER and SECTION_SIZE). If SYMS is
+ not NULL, use bfd_simple_get_relocated_section_contents to read the
+ section contents, otherwise use bfd_get_section_contents. Fail if
+ the located section does not contain at least OFFSET bytes. */
+
+static bfd_boolean
+read_section (bfd * abfd,
+ const char * section_name,
+ const char * compressed_section_name,
+ asymbol ** syms,
+ bfd_uint64_t offset,
+ bfd_byte ** section_buffer,
+ bfd_size_type * section_size)
+{
+ asection *msec;
+ bfd_boolean section_is_compressed = FALSE;
+
+ /* read_section is a noop if the section has already been read. */
+ if (!*section_buffer)
+ {
+ msec = bfd_get_section_by_name (abfd, section_name);
+ if (! msec && compressed_section_name)
+ {
+ msec = bfd_get_section_by_name (abfd, compressed_section_name);
+ section_is_compressed = TRUE;
+ }
+ if (! msec)
+ {
+ (*_bfd_error_handler) (_("Dwarf Error: Can't find %s section."), section_name);
+ bfd_set_error (bfd_error_bad_value);
+ return FALSE;
+ }
+
+ *section_size = msec->rawsize ? msec->rawsize : msec->size;
+ if (syms)
+ {
+ *section_buffer
+ = bfd_simple_get_relocated_section_contents (abfd, msec, NULL, syms);
+ if (! *section_buffer)
+ return FALSE;
+ }
+ else
+ {
+ *section_buffer = bfd_malloc (*section_size);
+ if (! *section_buffer)
+ return FALSE;
+ if (! bfd_get_section_contents (abfd, msec, *section_buffer,
+ 0, *section_size))
+ return FALSE;
+ }
+
+ if (section_is_compressed)
+ {
+ if (! bfd_uncompress_section_contents (section_buffer, section_size))
+ {
+ (*_bfd_error_handler) (_("Dwarf Error: unable to decompress %s section."), compressed_section_name);
+ bfd_set_error (bfd_error_bad_value);
+ return FALSE;
+ }
+ }
+ }
+
+ /* It is possible to get a bad value for the offset into the section
+ that the client wants. Validate it here to avoid trouble later. */
+ if (offset != 0 && offset >= *section_size)
+ {
+ (*_bfd_error_handler) (_("Dwarf Error: Offset (%lu) greater than or equal to %s size (%lu)."),
+ (long) offset, section_name, *section_size);
+ bfd_set_error (bfd_error_bad_value);
+ return FALSE;
+ }
+
+ return TRUE;
+}
+
/* VERBATIM
The following function up to the END VERBATIM mark are
copied directly from dwarf2read.c. */
bfd_byte *buf,
unsigned int size ATTRIBUTE_UNUSED)
{
- /* If the size of a host char is 8 bits, we can return a pointer
- to the buffer, otherwise we have to copy the data to a buffer
- allocated on the temporary obstack. */
return buf;
}
{
/* Return a pointer to the embedded string. */
char *str = (char *) buf;
+
if (*str == '\0')
{
*bytes_read_ptr = 1;
return str;
}
+/* END VERBATIM */
+
static char *
-read_indirect_string (struct comp_unit* unit,
- bfd_byte *buf,
- unsigned int *bytes_read_ptr)
+read_indirect_string (struct comp_unit * unit,
+ bfd_byte * buf,
+ unsigned int * bytes_read_ptr)
{
bfd_uint64_t offset;
struct dwarf2_debug *stash = unit->stash;
offset = read_4_bytes (unit->abfd, buf);
else
offset = read_8_bytes (unit->abfd, buf);
- *bytes_read_ptr = unit->offset_size;
-
- if (! stash->dwarf_str_buffer)
- {
- asection *msec;
- bfd *abfd = unit->abfd;
- bfd_size_type sz;
-
- msec = bfd_get_section_by_name (abfd, ".debug_str");
- if (! msec)
- {
- (*_bfd_error_handler)
- (_("Dwarf Error: Can't find .debug_str section."));
- bfd_set_error (bfd_error_bad_value);
- return NULL;
- }
-
- sz = msec->rawsize ? msec->rawsize : msec->size;
- stash->dwarf_str_size = sz;
- stash->dwarf_str_buffer = bfd_alloc (abfd, sz);
- if (! stash->dwarf_str_buffer)
- return NULL;
- if (! bfd_get_section_contents (abfd, msec, stash->dwarf_str_buffer,
- 0, sz))
- return NULL;
- }
+ *bytes_read_ptr = unit->offset_size;
- if (offset >= stash->dwarf_str_size)
- {
- (*_bfd_error_handler) (_("Dwarf Error: DW_FORM_strp offset (%lu) greater than or equal to .debug_str size (%lu)."),
- (unsigned long) offset, stash->dwarf_str_size);
- bfd_set_error (bfd_error_bad_value);
- return NULL;
- }
+ if (! read_section (unit->abfd, ".debug_str", ".zdebug_str",
+ stash->syms, offset,
+ &stash->dwarf_str_buffer, &stash->dwarf_str_size))
+ return NULL;
str = (char *) stash->dwarf_str_buffer + offset;
if (*str == '\0')
return str;
}
-/* END VERBATIM */
-
static bfd_uint64_t
read_address (struct comp_unit *unit, bfd_byte *buf)
{
unsigned int abbrev_form, hash_number;
bfd_size_type amt;
- if (! stash->dwarf_abbrev_buffer)
- {
- asection *msec;
-
- msec = bfd_get_section_by_name (abfd, ".debug_abbrev");
- if (! msec)
- {
- (*_bfd_error_handler) (_("Dwarf Error: Can't find .debug_abbrev section."));
- bfd_set_error (bfd_error_bad_value);
- return 0;
- }
-
- stash->dwarf_abbrev_size = msec->size;
- stash->dwarf_abbrev_buffer
- = bfd_simple_get_relocated_section_contents (abfd, msec, NULL,
- stash->syms);
- if (! stash->dwarf_abbrev_buffer)
- return 0;
- }
-
- if (offset >= stash->dwarf_abbrev_size)
- {
- (*_bfd_error_handler) (_("Dwarf Error: Abbrev offset (%lu) greater than or equal to .debug_abbrev size (%lu)."),
- (unsigned long) offset, stash->dwarf_abbrev_size);
- bfd_set_error (bfd_error_bad_value);
- return 0;
- }
+ if (! read_section (abfd, ".debug_abbrev", ".zdebug_abbrev",
+ stash->syms, offset,
+ &stash->dwarf_abbrev_buffer, &stash->dwarf_abbrev_size))
+ return 0;
amt = sizeof (struct abbrev_info*) * ABBREV_HASH_SIZE;
abbrevs = bfd_zalloc (abfd, amt);
switch (form)
{
- case DW_FORM_addr:
- /* FIXME: DWARF3 draft says DW_FORM_ref_addr is offset_size. */
case DW_FORM_ref_addr:
+ /* DW_FORM_ref_addr is an address in DWARF2, and an offset in
+ DWARF3. */
+ if (unit->version == 3)
+ {
+ if (unit->offset_size == 4)
+ attr->u.val = read_4_bytes (unit->abfd, info_ptr);
+ else
+ attr->u.val = read_8_bytes (unit->abfd, info_ptr);
+ info_ptr += unit->offset_size;
+ break;
+ }
+ /* FALLTHROUGH */
+ case DW_FORM_addr:
attr->u.val = read_address (unit, info_ptr);
info_ptr += unit->addr_size;
break;
Note: we may receive duplicate entries from 'decode_line_info'. */
- if (!table->last_line
+ if (table->last_line
+ && table->last_line->address == address
+ && table->last_line->end_sequence == end_sequence)
+ {
+ /* We only keep the last entry with the same address and end
+ sequence. See PR ld/4986. */
+ if (table->lcl_head == table->last_line)
+ table->lcl_head = info;
+ info->prev_line = table->last_line->prev_line;
+ table->last_line = info;
+ }
+ else if (!table->last_line
|| new_line_sorts_after (info, table->last_line))
{
/* Normal case: add 'info' to the beginning of the list */
filename = table->files[file - 1].name;
- if (! IS_ABSOLUTE_PATH (filename))
+ if (!IS_ABSOLUTE_PATH (filename))
{
- char *dirname = (table->files[file - 1].dir
- ? table->dirs[table->files[file - 1].dir - 1]
- : table->comp_dir);
+ char *dirname = NULL;
+ char *subdirname = NULL;
+ char *name;
+ size_t len;
+
+ if (table->files[file - 1].dir)
+ subdirname = table->dirs[table->files[file - 1].dir - 1];
+
+ if (!subdirname || !IS_ABSOLUTE_PATH (subdirname))
+ dirname = table->comp_dir;
- /* Not all tools set DW_AT_comp_dir, so dirname may be unknown.
- The best we can do is return the filename part. */
- if (dirname != NULL)
+ if (!dirname)
{
- unsigned int len = strlen (dirname) + strlen (filename) + 2;
- char * name;
+ dirname = subdirname;
+ subdirname = NULL;
+ }
+
+ if (!dirname)
+ return strdup (filename);
+ len = strlen (dirname) + strlen (filename) + 2;
+
+ if (subdirname)
+ {
+ len += strlen (subdirname) + 1;
+ name = bfd_malloc (len);
+ if (name)
+ sprintf (name, "%s/%s/%s", dirname, subdirname, filename);
+ }
+ else
+ {
name = bfd_malloc (len);
if (name)
sprintf (name, "%s/%s", dirname, filename);
- return name;
}
+
+ return name;
}
return strdup (filename);
unsigned char op_code, extended_op, adj_opcode;
bfd_size_type amt;
- if (! stash->dwarf_line_buffer)
- {
- asection *msec;
-
- msec = bfd_get_section_by_name (abfd, ".debug_line");
- if (! msec)
- {
- (*_bfd_error_handler) (_("Dwarf Error: Can't find .debug_line section."));
- bfd_set_error (bfd_error_bad_value);
- return 0;
- }
-
- stash->dwarf_line_size = msec->size;
- stash->dwarf_line_buffer
- = bfd_simple_get_relocated_section_contents (abfd, msec, NULL,
- stash->syms);
- if (! stash->dwarf_line_buffer)
- return 0;
- }
-
- /* It is possible to get a bad value for the line_offset. Validate
- it here so that we won't get a segfault below. */
- if (unit->line_offset >= stash->dwarf_line_size)
- {
- (*_bfd_error_handler) (_("Dwarf Error: Line offset (%lu) greater than or equal to .debug_line size (%lu)."),
- unit->line_offset, stash->dwarf_line_size);
- bfd_set_error (bfd_error_bad_value);
- return 0;
- }
+ if (! read_section (abfd, ".debug_line", ".zdebug_line",
+ stash->syms, unit->line_offset,
+ &stash->dwarf_line_buffer, &stash->dwarf_line_size))
+ return 0;
amt = sizeof (struct line_info_table);
table = bfd_alloc (abfd, amt);
unsigned int line = 1;
unsigned int column = 0;
int is_stmt = lh.default_is_stmt;
- int basic_block = 0;
int end_sequence = 0;
/* eraxxon@alumni.rice.edu: Against the DWARF2 specs, some
compilers generate address sequences that are wildly out of
line += lh.line_base + (adj_opcode % lh.line_range);
/* Append row to matrix using current values. */
add_line_info (table, address, filename, line, column, 0);
- basic_block = 1;
if (address < low_pc)
low_pc = address;
if (address > high_pc)
break;
case DW_LNS_copy:
add_line_info (table, address, filename, line, column, 0);
- basic_block = 0;
if (address < low_pc)
low_pc = address;
if (address > high_pc)
is_stmt = (!is_stmt);
break;
case DW_LNS_set_basic_block:
- basic_block = 1;
break;
case DW_LNS_const_add_pc:
address += lh.minimum_instruction_length
read_debug_ranges (struct comp_unit *unit)
{
struct dwarf2_debug *stash = unit->stash;
- if (! stash->dwarf_ranges_buffer)
- {
- bfd *abfd = unit->abfd;
- asection *msec;
-
- msec = bfd_get_section_by_name (abfd, ".debug_ranges");
- if (! msec)
- {
- (*_bfd_error_handler) (_("Dwarf Error: Can't find .debug_ranges section."));
- bfd_set_error (bfd_error_bad_value);
- return FALSE;
- }
-
- stash->dwarf_ranges_size = msec->size;
- stash->dwarf_ranges_buffer
- = bfd_simple_get_relocated_section_contents (abfd, msec, NULL,
- stash->syms);
- if (! stash->dwarf_ranges_buffer)
- return FALSE;
- }
- return TRUE;
+ return read_section (unit->abfd, ".debug_ranges", ".zdebug_ranges",
+ stash->syms, 0,
+ &stash->dwarf_ranges_buffer, &stash->dwarf_ranges_size);
}
/* Function table functions. */
}
static char *
-find_abstract_instance_name (struct comp_unit *unit, bfd_uint64_t die_ref)
+find_abstract_instance_name (struct comp_unit *unit,
+ struct attribute *attr_ptr)
{
bfd *abfd = unit->abfd;
bfd_byte *info_ptr;
unsigned int abbrev_number, bytes_read, i;
struct abbrev_info *abbrev;
+ bfd_uint64_t die_ref = attr_ptr->u.val;
struct attribute attr;
char *name = 0;
- info_ptr = unit->info_ptr_unit + die_ref;
+ /* DW_FORM_ref_addr can reference an entry in a different CU. It
+ is an offset from the .debug_info section, not the current CU. */
+ if (attr_ptr->form == DW_FORM_ref_addr)
+ {
+ /* We only support DW_FORM_ref_addr within the same file, so
+ any relocations should be resolved already. */
+ if (!die_ref)
+ abort ();
+
+ info_ptr = unit->stash->sec_info_ptr + die_ref;
+ }
+ else
+ info_ptr = unit->info_ptr_unit + die_ref;
abbrev_number = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
info_ptr += bytes_read;
name = attr.u.str;
break;
case DW_AT_specification:
- name = find_abstract_instance_name (unit, attr.u.val);
+ name = find_abstract_instance_name (unit, &attr);
break;
case DW_AT_MIPS_linkage_name:
name = attr.u.str;
bfd_vma low_pc;
bfd_vma high_pc;
- if (unit->addr_size == 4)
- {
- low_pc = read_4_bytes (unit->abfd, ranges_ptr);
- ranges_ptr += 4;
- high_pc = read_4_bytes (unit->abfd, ranges_ptr);
- ranges_ptr += 4;
- }
- else
- {
- low_pc = read_8_bytes (unit->abfd, ranges_ptr);
- ranges_ptr += 8;
- high_pc = read_8_bytes (unit->abfd, ranges_ptr);
- ranges_ptr += 8;
- }
+ low_pc = read_address (unit, ranges_ptr);
+ ranges_ptr += unit->addr_size;
+ high_pc = read_address (unit, ranges_ptr);
+ ranges_ptr += unit->addr_size;
+
if (low_pc == 0 && high_pc == 0)
break;
if (low_pc == -1UL && high_pc != -1UL)
base_address = high_pc;
else
- arange_add (unit->abfd, arange, base_address + low_pc, base_address + high_pc);
+ arange_add (unit->abfd, arange, base_address + low_pc, base_address + high_pc);
}
}
func->tag = abbrev->tag;
func->prev_func = unit->function_table;
unit->function_table = func;
+ BFD_ASSERT (!unit->cached);
if (func->tag == DW_TAG_inlined_subroutine)
for (i = nesting_level - 1; i >= 1; i--)
var->stack = 1;
var->prev_var = unit->variable_table;
unit->variable_table = var;
+ BFD_ASSERT (!unit->cached);
}
/* No inline function in scope at this nesting level. */
break;
case DW_AT_abstract_origin:
- func->name = find_abstract_instance_name (unit, attr.u.val);
+ func->name = find_abstract_instance_name (unit, &attr);
break;
case DW_AT_name:
to get to the line number information for the compilation unit. */
static struct comp_unit *
-parse_comp_unit (bfd *abfd,
- struct dwarf2_debug *stash,
+parse_comp_unit (struct dwarf2_debug *stash,
bfd_vma unit_length,
bfd_byte *info_ptr_unit,
unsigned int offset_size)
bfd_size_type amt;
bfd_vma low_pc = 0;
bfd_vma high_pc = 0;
+ bfd *abfd = stash->bfd;
version = read_2_bytes (abfd, info_ptr);
info_ptr += 2;
addr_size = read_1_byte (abfd, info_ptr);
info_ptr += 1;
- if (version != 2)
+ if (version != 2 && version != 3)
{
- (*_bfd_error_handler) (_("Dwarf Error: found dwarf version '%u', this reader only handles version 2 information."), version);
+ (*_bfd_error_handler) (_("Dwarf Error: found dwarf version '%u', this reader only handles version 2 and 3 information."), version);
bfd_set_error (bfd_error_bad_value);
return 0;
}
amt = sizeof (struct comp_unit);
unit = bfd_zalloc (abfd, amt);
unit->abfd = abfd;
+ unit->version = version;
unit->addr_size = addr_size;
unit->offset_size = offset_size;
unit->abbrevs = abbrevs;
return line_p || func_p;
}
-/* If UNIT contains SYM at ADDR, set the output parameters to the
- values for the line containing SYM. The output parameters,
- FILENAME_PTR, and LINENUMBER_PTR, are pointers to the objects to be
- filled in.
-
- Return TRUE if UNIT contains SYM, and no errors were encountered;
+/* Check to see if line info is already decoded in a comp_unit.
+ If not, decode it. Returns TRUE if no errors were encountered;
FALSE otherwise. */
static bfd_boolean
-comp_unit_find_line (struct comp_unit *unit,
- asymbol *sym,
- bfd_vma addr,
- const char **filename_ptr,
- unsigned int *linenumber_ptr,
- struct dwarf2_debug *stash)
+comp_unit_maybe_decode_line_info (struct comp_unit *unit,
+ struct dwarf2_debug *stash)
{
if (unit->error)
return FALSE;
}
}
+ return TRUE;
+}
+
+/* If UNIT contains SYM at ADDR, set the output parameters to the
+ values for the line containing SYM. The output parameters,
+ FILENAME_PTR, and LINENUMBER_PTR, are pointers to the objects to be
+ filled in.
+
+ Return TRUE if UNIT contains SYM, and no errors were encountered;
+ FALSE otherwise. */
+
+static bfd_boolean
+comp_unit_find_line (struct comp_unit *unit,
+ asymbol *sym,
+ bfd_vma addr,
+ const char **filename_ptr,
+ unsigned int *linenumber_ptr,
+ struct dwarf2_debug *stash)
+{
+ if (!comp_unit_maybe_decode_line_info (unit, stash))
+ return FALSE;
+
if (sym->flags & BSF_FUNCTION)
return lookup_symbol_in_function_table (unit, sym, addr,
filename_ptr,
linenumber_ptr);
- else
- return lookup_symbol_in_variable_table (unit, sym, addr,
- filename_ptr,
- linenumber_ptr);
-}
-/* Locate a section in a BFD containing debugging info. The search starts
- from the section after AFTER_SEC, or from the first section in the BFD if
- AFTER_SEC is NULL. The search works by examining the names of the
- sections. There are two permissiable names. The first is .debug_info.
- This is the standard DWARF2 name. The second is a prefix .gnu.linkonce.wi.
- This is a variation on the .debug_info section which has a checksum
- describing the contents appended onto the name. This allows the linker to
- identify and discard duplicate debugging sections for different
- compilation units. */
-#define DWARF2_DEBUG_INFO ".debug_info"
-#define GNU_LINKONCE_INFO ".gnu.linkonce.wi."
+ return lookup_symbol_in_variable_table (unit, sym, addr,
+ filename_ptr,
+ linenumber_ptr);
+}
-static asection *
-find_debug_info (bfd *abfd, asection *after_sec)
+static struct funcinfo *
+reverse_funcinfo_list (struct funcinfo *head)
{
- asection * msec;
-
- if (after_sec)
- msec = after_sec->next;
- else
- msec = abfd->sections;
+ struct funcinfo *rhead;
+ struct funcinfo *temp;
- while (msec)
+ for (rhead = NULL; head; head = temp)
{
- if (strcmp (msec->name, DWARF2_DEBUG_INFO) == 0)
- return msec;
+ temp = head->prev_func;
+ head->prev_func = rhead;
+ rhead = head;
+ }
+ return rhead;
+}
- if (strncmp (msec->name, GNU_LINKONCE_INFO, strlen (GNU_LINKONCE_INFO)) == 0)
- return msec;
+static struct varinfo *
+reverse_varinfo_list (struct varinfo *head)
+{
+ struct varinfo *rhead;
+ struct varinfo *temp;
- msec = msec->next;
+ for (rhead = NULL; head; head = temp)
+ {
+ temp = head->prev_var;
+ head->prev_var = rhead;
+ rhead = head;
}
-
- return NULL;
+ return rhead;
}
-/* Unset vmas for loadable sections in STASH. */
+/* Extract all interesting funcinfos and varinfos of a compilation
+ unit into hash tables for faster lookup. Returns TRUE if no
+ errors were enountered; FALSE otherwise. */
-static void
-unset_sections (struct dwarf2_debug *stash)
+static bfd_boolean
+comp_unit_hash_info (struct dwarf2_debug *stash,
+ struct comp_unit *unit,
+ struct info_hash_table *funcinfo_hash_table,
+ struct info_hash_table *varinfo_hash_table)
+{
+ struct funcinfo* each_func;
+ struct varinfo* each_var;
+ bfd_boolean okay = TRUE;
+
+ BFD_ASSERT (stash->info_hash_status != STASH_INFO_HASH_DISABLED);
+
+ if (!comp_unit_maybe_decode_line_info (unit, stash))
+ return FALSE;
+
+ BFD_ASSERT (!unit->cached);
+
+ /* To preserve the original search order, we went to visit the function
+ infos in the reversed order of the list. However, making the list
+ bi-directional use quite a bit of extra memory. So we reverse
+ the list first, traverse the list in the now reversed order and
+ finally reverse the list again to get back the original order. */
+ unit->function_table = reverse_funcinfo_list (unit->function_table);
+ for (each_func = unit->function_table;
+ each_func && okay;
+ each_func = each_func->prev_func)
+ {
+ /* Skip nameless functions. */
+ if (each_func->name)
+ /* There is no need to copy name string into hash table as
+ name string is either in the dwarf string buffer or
+ info in the stash. */
+ okay = insert_info_hash_table (funcinfo_hash_table, each_func->name,
+ (void*) each_func, FALSE);
+ }
+ unit->function_table = reverse_funcinfo_list (unit->function_table);
+ if (!okay)
+ return FALSE;
+
+ /* We do the same for variable infos. */
+ unit->variable_table = reverse_varinfo_list (unit->variable_table);
+ for (each_var = unit->variable_table;
+ each_var && okay;
+ each_var = each_var->prev_var)
+ {
+ /* Skip stack vars and vars with no files or names. */
+ if (each_var->stack == 0
+ && each_var->file != NULL
+ && each_var->name != NULL)
+ /* There is no need to copy name string into hash table as
+ name string is either in the dwarf string buffer or
+ info in the stash. */
+ okay = insert_info_hash_table (varinfo_hash_table, each_var->name,
+ (void*) each_var, FALSE);
+ }
+
+ unit->variable_table = reverse_varinfo_list (unit->variable_table);
+ unit->cached = TRUE;
+ return okay;
+}
+
+/* Locate a section in a BFD containing debugging info. The search starts
+ from the section after AFTER_SEC, or from the first section in the BFD if
+ AFTER_SEC is NULL. The search works by examining the names of the
+ sections. There are two permissiable names. The first is .debug_info.
+ This is the standard DWARF2 name. The second is a prefix .gnu.linkonce.wi.
+ This is a variation on the .debug_info section which has a checksum
+ describing the contents appended onto the name. This allows the linker to
+ identify and discard duplicate debugging sections for different
+ compilation units. */
+#define DWARF2_DEBUG_INFO ".debug_info"
+#define DWARF2_COMPRESSED_DEBUG_INFO ".zdebug_info"
+#define GNU_LINKONCE_INFO ".gnu.linkonce.wi."
+
+static asection *
+find_debug_info (bfd *abfd, asection *after_sec)
+{
+ asection * msec;
+
+ msec = after_sec != NULL ? after_sec->next : abfd->sections;
+
+ while (msec)
+ {
+ if (strcmp (msec->name, DWARF2_DEBUG_INFO) == 0)
+ return msec;
+
+ if (strcmp (msec->name, DWARF2_COMPRESSED_DEBUG_INFO) == 0)
+ return msec;
+
+ if (CONST_STRNEQ (msec->name, GNU_LINKONCE_INFO))
+ return msec;
+
+ msec = msec->next;
+ }
+
+ return NULL;
+}
+
+/* Unset vmas for adjusted sections in STASH. */
+
+static void
+unset_sections (struct dwarf2_debug *stash)
{
unsigned int i;
- struct loadable_section *p;
+ struct adjusted_section *p;
- i = stash->loadable_section_count;
- p = stash->loadable_sections;
+ i = stash->adjusted_section_count;
+ p = stash->adjusted_sections;
for (; i > 0; i--, p++)
p->section->vma = 0;
}
-/* Set unique vmas for loadable sections in ABFD and save vmas in
- STASH for unset_sections. */
+/* Set unique VMAs for loadable and DWARF sections in ABFD and save
+ VMAs in STASH for unset_sections. */
static bfd_boolean
place_sections (bfd *abfd, struct dwarf2_debug *stash)
{
- struct loadable_section *p;
+ struct adjusted_section *p;
unsigned int i;
- if (stash->loadable_section_count != 0)
+ if (stash->adjusted_section_count != 0)
{
- i = stash->loadable_section_count;
- p = stash->loadable_sections;
+ i = stash->adjusted_section_count;
+ p = stash->adjusted_sections;
for (; i > 0; i--, p++)
p->section->vma = p->adj_vma;
}
else
{
asection *sect;
- bfd_vma last_vma = 0;
+ bfd_vma last_vma = 0, last_dwarf = 0;
bfd_size_type amt;
- struct loadable_section *p;
+ struct adjusted_section *p;
i = 0;
for (sect = abfd->sections; sect != NULL; sect = sect->next)
{
bfd_size_type sz;
+ int is_debug_info;
- if (sect->vma != 0 || (sect->flags & SEC_LOAD) == 0)
+ if (sect->vma != 0)
+ continue;
+
+ /* We need to adjust the VMAs of any .debug_info sections.
+ Skip compressed ones, since no relocations could target
+ them - they should not appear in object files anyway. */
+ if (strcmp (sect->name, DWARF2_DEBUG_INFO) == 0)
+ is_debug_info = 1;
+ else if (CONST_STRNEQ (sect->name, GNU_LINKONCE_INFO))
+ is_debug_info = 1;
+ else
+ is_debug_info = 0;
+
+ if (!is_debug_info && (sect->flags & SEC_LOAD) == 0)
continue;
sz = sect->rawsize ? sect->rawsize : sect->size;
i++;
}
- amt = i * sizeof (struct loadable_section);
- p = (struct loadable_section *) bfd_zalloc (abfd, amt);
+ amt = i * sizeof (struct adjusted_section);
+ p = (struct adjusted_section *) bfd_zalloc (abfd, amt);
if (! p)
return FALSE;
- stash->loadable_sections = p;
- stash->loadable_section_count = i;
+ stash->adjusted_sections = p;
+ stash->adjusted_section_count = i;
for (sect = abfd->sections; sect != NULL; sect = sect->next)
{
bfd_size_type sz;
+ int is_debug_info;
+
+ if (sect->vma != 0)
+ continue;
- if (sect->vma != 0 || (sect->flags & SEC_LOAD) == 0)
+ /* We need to adjust the VMAs of any .debug_info sections.
+ Skip compressed ones, since no relocations could target
+ them - they should not appear in object files anyway. */
+ if (strcmp (sect->name, DWARF2_DEBUG_INFO) == 0)
+ is_debug_info = 1;
+ else if (CONST_STRNEQ (sect->name, GNU_LINKONCE_INFO))
+ is_debug_info = 1;
+ else
+ is_debug_info = 0;
+
+ if (!is_debug_info && (sect->flags & SEC_LOAD) == 0)
continue;
sz = sect->rawsize ? sect->rawsize : sect->size;
continue;
p->section = sect;
- if (last_vma != 0)
+ if (is_debug_info)
+ {
+ BFD_ASSERT (sect->alignment_power == 0);
+ sect->vma = last_dwarf;
+ last_dwarf += sz;
+ }
+ else if (last_vma != 0)
{
/* Align the new address to the current section
alignment. */
+ ~((bfd_vma) -1 << sect->alignment_power))
& ((bfd_vma) -1 << sect->alignment_power));
sect->vma = last_vma;
+ last_vma += sect->vma + sz;
}
+ else
+ last_vma += sect->vma + sz;
+
p->adj_vma = sect->vma;
- last_vma += sect->vma + sz;
p++;
}
return TRUE;
}
-/* The DWARF2 version of find_nearest_line. Return TRUE if the line
- is found without error. ADDR_SIZE is the number of bytes in the
- initial .debug_info length field and in the abbreviation offset.
- You may use zero to indicate that the default value should be
- used. */
-
-bfd_boolean
-_bfd_dwarf2_find_nearest_line (bfd *abfd,
- asection *section,
- asymbol **symbols,
- bfd_vma offset,
- const char **filename_ptr,
- const char **functionname_ptr,
- unsigned int *linenumber_ptr,
- unsigned int addr_size,
- void **pinfo)
-{
- /* Read each compilation unit from the section .debug_info, and check
- to see if it contains the address we are searching for. If yes,
- lookup the address, and return the line number info. If no, go
- on to the next compilation unit.
-
- We keep a list of all the previously read compilation units, and
- a pointer to the next un-read compilation unit. Check the
- previously read units before reading more. */
- struct dwarf2_debug *stash;
+/* Look up a funcinfo by name using the given info hash table. If found,
+ also update the locations pointed to by filename_ptr and linenumber_ptr.
- /* What address are we looking for? */
- bfd_vma addr;
-
- struct comp_unit* each;
+ This function returns TRUE if a funcinfo that matches the given symbol
+ and address is found with any error; otherwise it returns FALSE. */
- bfd_vma found = FALSE;
-
- stash = *pinfo;
+static bfd_boolean
+info_hash_lookup_funcinfo (struct info_hash_table *hash_table,
+ asymbol *sym,
+ bfd_vma addr,
+ const char **filename_ptr,
+ unsigned int *linenumber_ptr)
+{
+ struct funcinfo* each_func;
+ struct funcinfo* best_fit = NULL;
+ struct info_list_node *node;
+ struct arange *arange;
+ const char *name = bfd_asymbol_name (sym);
+ asection *sec = bfd_get_section (sym);
- if (! stash)
+ for (node = lookup_info_hash_table (hash_table, name);
+ node;
+ node = node->next)
{
- bfd_size_type amt = sizeof (struct dwarf2_debug);
-
- stash = bfd_zalloc (abfd, amt);
- if (! stash)
- return FALSE;
+ each_func = node->info;
+ for (arange = &each_func->arange;
+ arange;
+ arange = arange->next)
+ {
+ if ((!each_func->sec || each_func->sec == sec)
+ && addr >= arange->low
+ && addr < arange->high
+ && (!best_fit
+ || ((arange->high - arange->low)
+ < (best_fit->arange.high - best_fit->arange.low))))
+ best_fit = each_func;
+ }
}
- /* In a relocatable file, 2 functions may have the same address.
- We change the section vma so that they won't overlap. */
- if ((abfd->flags & (EXEC_P | DYNAMIC)) == 0)
+ if (best_fit)
{
- if (! place_sections (abfd, stash))
- return FALSE;
+ best_fit->sec = sec;
+ *filename_ptr = best_fit->file;
+ *linenumber_ptr = best_fit->line;
+ return TRUE;
}
- addr = offset;
- if (section->output_section)
- addr += section->output_section->vma + section->output_offset;
- else
- addr += section->vma;
- *filename_ptr = NULL;
- *functionname_ptr = NULL;
- *linenumber_ptr = 0;
+ return FALSE;
+}
- /* The DWARF2 spec says that the initial length field, and the
- offset of the abbreviation table, should both be 4-byte values.
- However, some compilers do things differently. */
- if (addr_size == 0)
- addr_size = 4;
- BFD_ASSERT (addr_size == 4 || addr_size == 8);
+/* Look up a varinfo by name using the given info hash table. If found,
+ also update the locations pointed to by filename_ptr and linenumber_ptr.
- if (! *pinfo)
- {
- bfd_size_type total_size;
- asection *msec;
+ This function returns TRUE if a varinfo that matches the given symbol
+ and address is found with any error; otherwise it returns FALSE. */
- *pinfo = stash;
+static bfd_boolean
+info_hash_lookup_varinfo (struct info_hash_table *hash_table,
+ asymbol *sym,
+ bfd_vma addr,
+ const char **filename_ptr,
+ unsigned int *linenumber_ptr)
+{
+ const char *name = bfd_asymbol_name (sym);
+ asection *sec = bfd_get_section (sym);
+ struct varinfo* each;
+ struct info_list_node *node;
- msec = find_debug_info (abfd, NULL);
- if (! msec)
- /* No dwarf2 info. Note that at this point the stash
- has been allocated, but contains zeros, this lets
- future calls to this function fail quicker. */
- goto done;
-
- /* There can be more than one DWARF2 info section in a BFD these days.
- Read them all in and produce one large stash. We do this in two
- passes - in the first pass we just accumulate the section sizes.
- In the second pass we read in the section's contents. The allows
- us to avoid reallocing the data as we add sections to the stash. */
- for (total_size = 0; msec; msec = find_debug_info (abfd, msec))
- total_size += msec->size;
-
- stash->info_ptr = bfd_alloc (abfd, total_size);
- if (stash->info_ptr == NULL)
- goto done;
-
- stash->info_ptr_end = stash->info_ptr;
-
- for (msec = find_debug_info (abfd, NULL);
- msec;
- msec = find_debug_info (abfd, msec))
+ for (node = lookup_info_hash_table (hash_table, name);
+ node;
+ node = node->next)
+ {
+ each = node->info;
+ if (each->addr == addr
+ && (!each->sec || each->sec == sec))
{
- bfd_size_type size;
- bfd_size_type start;
-
- size = msec->size;
- if (size == 0)
- continue;
-
- start = stash->info_ptr_end - stash->info_ptr;
-
- if ((bfd_simple_get_relocated_section_contents
- (abfd, msec, stash->info_ptr + start, symbols)) == NULL)
- continue;
-
- stash->info_ptr_end = stash->info_ptr + start + size;
+ each->sec = sec;
+ *filename_ptr = each->file;
+ *linenumber_ptr = each->line;
+ return TRUE;
}
+ }
- BFD_ASSERT (stash->info_ptr_end == stash->info_ptr + total_size);
+ return FALSE;
+}
- stash->sec = find_debug_info (abfd, NULL);
- stash->sec_info_ptr = stash->info_ptr;
- stash->syms = symbols;
- }
+/* Update the funcinfo and varinfo info hash tables if they are
+ not up to date. Returns TRUE if there is no error; otherwise
+ returns FALSE and disable the info hash tables. */
- /* A null info_ptr indicates that there is no dwarf2 info
- (or that an error occured while setting up the stash). */
- if (! stash->info_ptr)
- goto done;
+static bfd_boolean
+stash_maybe_update_info_hash_tables (struct dwarf2_debug *stash)
+{
+ struct comp_unit *each;
- stash->inliner_chain = NULL;
+ /* Exit if hash tables are up-to-date. */
+ if (stash->all_comp_units == stash->hash_units_head)
+ return TRUE;
- /* Check the previously read comp. units first. */
- for (each = stash->all_comp_units; each; each = each->next_unit)
- if (comp_unit_contains_address (each, addr)
- && comp_unit_find_nearest_line (each, addr, filename_ptr,
- functionname_ptr,
- linenumber_ptr, stash))
- {
- found = TRUE;
- goto done;
- }
+ if (stash->hash_units_head)
+ each = stash->hash_units_head->prev_unit;
+ else
+ each = stash->last_comp_unit;
- /* Read each remaining comp. units checking each as they are read. */
- while (stash->info_ptr < stash->info_ptr_end)
+ while (each)
{
- bfd_vma length;
- unsigned int offset_size = addr_size;
- bfd_byte *info_ptr_unit = stash->info_ptr;
-
- length = read_4_bytes (abfd, stash->info_ptr);
- /* A 0xffffff length is the DWARF3 way of indicating we use
- 64-bit offsets, instead of 32-bit offsets. */
- if (length == 0xffffffff)
- {
- offset_size = 8;
- length = read_8_bytes (abfd, stash->info_ptr + 4);
- stash->info_ptr += 12;
- }
- /* A zero length is the IRIX way of indicating 64-bit offsets,
- mostly because the 64-bit length will generally fit in 32
- bits, and the endianness helps. */
- else if (length == 0)
+ if (!comp_unit_hash_info (stash, each, stash->funcinfo_hash_table,
+ stash->varinfo_hash_table))
{
- offset_size = 8;
- length = read_4_bytes (abfd, stash->info_ptr + 4);
- stash->info_ptr += 8;
- }
- /* In the absence of the hints above, we assume addr_size-sized
- offsets, for backward-compatibility with pre-DWARF3 64-bit
- platforms. */
- else if (addr_size == 8)
- {
- length = read_8_bytes (abfd, stash->info_ptr);
- stash->info_ptr += 8;
+ stash->info_hash_status = STASH_INFO_HASH_DISABLED;
+ return FALSE;
}
- else
- stash->info_ptr += 4;
+ each = each->prev_unit;
+ }
- if (length > 0)
- {
- each = parse_comp_unit (abfd, stash, length, info_ptr_unit,
- offset_size);
- stash->info_ptr += length;
+ stash->hash_units_head = stash->all_comp_units;
+ return TRUE;
+}
- if ((bfd_vma) (stash->info_ptr - stash->sec_info_ptr)
- == stash->sec->size)
+/* Check consistency of info hash tables. This is for debugging only. */
+
+static void ATTRIBUTE_UNUSED
+stash_verify_info_hash_table (struct dwarf2_debug *stash)
+{
+ struct comp_unit *each_unit;
+ struct funcinfo *each_func;
+ struct varinfo *each_var;
+ struct info_list_node *node;
+ bfd_boolean found;
+
+ for (each_unit = stash->all_comp_units;
+ each_unit;
+ each_unit = each_unit->next_unit)
+ {
+ for (each_func = each_unit->function_table;
+ each_func;
+ each_func = each_func->prev_func)
+ {
+ if (!each_func->name)
+ continue;
+ node = lookup_info_hash_table (stash->funcinfo_hash_table,
+ each_func->name);
+ BFD_ASSERT (node);
+ found = FALSE;
+ while (node && !found)
{
- stash->sec = find_debug_info (abfd, stash->sec);
- stash->sec_info_ptr = stash->info_ptr;
+ found = node->info == each_func;
+ node = node->next;
}
+ BFD_ASSERT (found);
+ }
- if (each)
+ for (each_var = each_unit->variable_table;
+ each_var;
+ each_var = each_var->prev_var)
+ {
+ if (!each_var->name || !each_var->file || each_var->stack)
+ continue;
+ node = lookup_info_hash_table (stash->varinfo_hash_table,
+ each_var->name);
+ BFD_ASSERT (node);
+ found = FALSE;
+ while (node && !found)
{
- each->next_unit = stash->all_comp_units;
- stash->all_comp_units = each;
-
- /* DW_AT_low_pc and DW_AT_high_pc are optional for
- compilation units. If we don't have them (i.e.,
- unit->high == 0), we need to consult the line info
- table to see if a compilation unit contains the given
- address. */
- if ((each->arange.high == 0
- || comp_unit_contains_address (each, addr))
- && comp_unit_find_nearest_line (each, addr,
- filename_ptr,
- functionname_ptr,
- linenumber_ptr,
- stash))
- {
- found = TRUE;
- goto done;
- }
+ found = node->info == each_var;
+ node = node->next;
}
+ BFD_ASSERT (found);
}
}
+}
-done:
- if ((abfd->flags & (EXEC_P | DYNAMIC)) == 0)
- unset_sections (stash);
+/* Check to see if we want to enable the info hash tables, which consume
+ quite a bit of memory. Currently we only check the number times
+ bfd_dwarf2_find_line is called. In the future, we may also want to
+ take the number of symbols into account. */
- return found;
+static void
+stash_maybe_enable_info_hash_tables (bfd *abfd, struct dwarf2_debug *stash)
+{
+ BFD_ASSERT (stash->info_hash_status == STASH_INFO_HASH_OFF);
+
+ if (stash->info_hash_count++ < STASH_INFO_HASH_TRIGGER)
+ return;
+
+ /* FIXME: Maybe we should check the reduce_memory_overheads
+ and optimize fields in the bfd_link_info structure ? */
+
+ /* Create hash tables. */
+ stash->funcinfo_hash_table = create_info_hash_table (abfd);
+ stash->varinfo_hash_table = create_info_hash_table (abfd);
+ if (!stash->funcinfo_hash_table || !stash->varinfo_hash_table)
+ {
+ /* Turn off info hashes if any allocation above fails. */
+ stash->info_hash_status = STASH_INFO_HASH_DISABLED;
+ return;
+ }
+ /* We need a forced update so that the info hash tables will
+ be created even though there is no compilation unit. That
+ happens if STASH_INFO_HASH_TRIGGER is 0. */
+ stash_maybe_update_info_hash_tables (stash);
+ stash->info_hash_status = STASH_INFO_HASH_ON;
}
-/* The DWARF2 version of find_line. Return TRUE if the line is found
- without error. */
+/* Find the file and line associated with a symbol and address using the
+ info hash tables of a stash. If there is a match, the function returns
+ TRUE and update the locations pointed to by filename_ptr and linenumber_ptr;
+ otherwise it returns FALSE. */
-bfd_boolean
-_bfd_dwarf2_find_line (bfd *abfd,
- asymbol **symbols,
- asymbol *symbol,
- const char **filename_ptr,
- unsigned int *linenumber_ptr,
- unsigned int addr_size,
- void **pinfo)
+static bfd_boolean
+stash_find_line_fast (struct dwarf2_debug *stash,
+ asymbol *sym,
+ bfd_vma addr,
+ const char **filename_ptr,
+ unsigned int *linenumber_ptr)
+{
+ BFD_ASSERT (stash->info_hash_status == STASH_INFO_HASH_ON);
+
+ if (sym->flags & BSF_FUNCTION)
+ return info_hash_lookup_funcinfo (stash->funcinfo_hash_table, sym, addr,
+ filename_ptr, linenumber_ptr);
+ return info_hash_lookup_varinfo (stash->varinfo_hash_table, sym, addr,
+ filename_ptr, linenumber_ptr);
+}
+
+/* Find the source code location of SYMBOL. If SYMBOL is NULL
+ then find the nearest source code location corresponding to
+ the address SECTION + OFFSET.
+ Returns TRUE if the line is found without error and fills in
+ FILENAME_PTR and LINENUMBER_PTR. In the case where SYMBOL was
+ NULL the FUNCTIONNAME_PTR is also filled in.
+ SYMBOLS contains the symbol table for ABFD.
+ ADDR_SIZE is the number of bytes in the initial .debug_info length
+ field and in the abbreviation offset, or zero to indicate that the
+ default value should be used. */
+
+static bfd_boolean
+find_line (bfd *abfd,
+ asection *section,
+ bfd_vma offset,
+ asymbol *symbol,
+ asymbol **symbols,
+ const char **filename_ptr,
+ const char **functionname_ptr,
+ unsigned int *linenumber_ptr,
+ unsigned int addr_size,
+ void **pinfo)
{
/* Read each compilation unit from the section .debug_info, and check
to see if it contains the address we are searching for. If yes,
a pointer to the next un-read compilation unit. Check the
previously read units before reading more. */
struct dwarf2_debug *stash;
-
/* What address are we looking for? */
bfd_vma addr;
-
struct comp_unit* each;
-
- asection *section;
-
- bfd_boolean found = FALSE;
-
- section = bfd_get_section (symbol);
+ bfd_vma found = FALSE;
+ bfd_boolean do_line;
stash = *pinfo;
/* In a relocatable file, 2 functions may have the same address.
We change the section vma so that they won't overlap. */
- if (!stash && (abfd->flags & (EXEC_P | DYNAMIC)) == 0)
+ if ((abfd->flags & (EXEC_P | DYNAMIC)) == 0)
{
if (! place_sections (abfd, stash))
return FALSE;
}
- addr = symbol->value;
+ do_line = (section == NULL
+ && offset == 0
+ && functionname_ptr == NULL
+ && symbol != NULL);
+ if (do_line)
+ {
+ addr = symbol->value;
+ section = bfd_get_section (symbol);
+ }
+ else if (section != NULL
+ && functionname_ptr != NULL
+ && symbol == NULL)
+ addr = offset;
+ else
+ abort ();
+
if (section->output_section)
addr += section->output_section->vma + section->output_offset;
else
addr += section->vma;
-
- *filename_ptr = NULL;
*filename_ptr = NULL;
+ if (! do_line)
+ *functionname_ptr = NULL;
*linenumber_ptr = 0;
if (! *pinfo)
{
+ bfd *debug_bfd;
bfd_size_type total_size;
asection *msec;
*pinfo = stash;
msec = find_debug_info (abfd, NULL);
- if (! msec)
- /* No dwarf2 info. Note that at this point the stash
- has been allocated, but contains zeros, this lets
- future calls to this function fail quicker. */
- goto done;
-
- /* There can be more than one DWARF2 info section in a BFD these days.
- Read them all in and produce one large stash. We do this in two
- passes - in the first pass we just accumulate the section sizes.
- In the second pass we read in the section's contents. The allows
- us to avoid reallocing the data as we add sections to the stash. */
- for (total_size = 0; msec; msec = find_debug_info (abfd, msec))
- total_size += msec->size;
-
- stash->info_ptr = bfd_alloc (abfd, total_size);
- if (stash->info_ptr == NULL)
- goto done;
-
- stash->info_ptr_end = stash->info_ptr;
-
- for (msec = find_debug_info (abfd, NULL);
- msec;
- msec = find_debug_info (abfd, msec))
+ if (msec == NULL)
+ {
+ char * debug_filename = bfd_follow_gnu_debuglink (abfd, DEBUGDIR);
+
+ if (debug_filename == NULL)
+ /* No dwarf2 info, and no gnu_debuglink to follow.
+ Note that at this point the stash has been allocated, but
+ contains zeros. This lets future calls to this function
+ fail more quickly. */
+ goto done;
+
+ if ((debug_bfd = bfd_openr (debug_filename, NULL)) == NULL
+ || ! bfd_check_format (debug_bfd, bfd_object)
+ || (msec = find_debug_info (debug_bfd, NULL)) == NULL)
+ {
+ if (debug_bfd)
+ bfd_close (debug_bfd);
+ /* FIXME: Should we report our failure to follow the debuglink ? */
+ free (debug_filename);
+ goto done;
+ }
+ }
+ else
+ debug_bfd = abfd;
+
+ /* There can be more than one DWARF2 info section in a BFD these
+ days. First handle the easy case when there's only one. If
+ there's more than one, try case two: none of the sections is
+ compressed. In that case, read them all in and produce one
+ large stash. We do this in two passes - in the first pass we
+ just accumulate the section sizes, and in the second pass we
+ read in the section's contents. (The allows us to avoid
+ reallocing the data as we add sections to the stash.) If
+ some or all sections are compressed, then do things the slow
+ way, with a bunch of reallocs. */
+
+ if (! find_debug_info (debug_bfd, msec))
{
- bfd_size_type size;
- bfd_size_type start;
+ /* Case 1: only one info section. */
+ total_size = msec->size;
+ if (! read_section (debug_bfd, ".debug_info", ".zdebug_info",
+ symbols, 0,
+ &stash->info_ptr_memory, &total_size))
+ goto done;
+ }
+ else
+ {
+ int all_uncompressed = 1;
+ for (total_size = 0; msec; msec = find_debug_info (debug_bfd, msec))
+ {
+ total_size += msec->size;
+ if (strcmp (msec->name, DWARF2_COMPRESSED_DEBUG_INFO) == 0)
+ all_uncompressed = 0;
+ }
+ if (all_uncompressed)
+ {
+ /* Case 2: multiple sections, but none is compressed. */
+ stash->info_ptr_memory = bfd_malloc (total_size);
+ if (stash->info_ptr_memory == NULL)
+ goto done;
- size = msec->size;
- if (size == 0)
- continue;
+ total_size = 0;
+ for (msec = find_debug_info (debug_bfd, NULL);
+ msec;
+ msec = find_debug_info (debug_bfd, msec))
+ {
+ bfd_size_type size;
- start = stash->info_ptr_end - stash->info_ptr;
+ size = msec->size;
+ if (size == 0)
+ continue;
- if ((bfd_simple_get_relocated_section_contents
- (abfd, msec, stash->info_ptr + start, symbols)) == NULL)
- continue;
+ if (!(bfd_simple_get_relocated_section_contents
+ (debug_bfd, msec, stash->info_ptr_memory + total_size,
+ symbols)))
+ goto done;
- stash->info_ptr_end = stash->info_ptr + start + size;
- }
+ total_size += size;
+ }
+ }
+ else
+ {
+ /* Case 3: multiple sections, some or all compressed. */
+ stash->info_ptr_memory = NULL;
+ total_size = 0;
+ for (msec = find_debug_info (debug_bfd, NULL);
+ msec;
+ msec = find_debug_info (debug_bfd, msec))
+ {
+ bfd_size_type size = msec->size;
+ bfd_byte* buffer;
+
+ if (size == 0)
+ continue;
+
+ buffer = (bfd_simple_get_relocated_section_contents
+ (debug_bfd, msec, NULL, symbols));
+ if (! buffer)
+ goto done;
- BFD_ASSERT (stash->info_ptr_end == stash->info_ptr + total_size);
+ if (strcmp (msec->name, DWARF2_COMPRESSED_DEBUG_INFO) == 0)
+ {
+ if (! bfd_uncompress_section_contents (&buffer, &size))
+ {
+ free (buffer);
+ goto done;
+ }
+ }
+ stash->info_ptr_memory = bfd_realloc (stash->info_ptr_memory,
+ total_size + size);
+ memcpy (stash->info_ptr_memory + total_size, buffer, size);
+ free (buffer);
+ total_size += size;
+ }
+ }
+ }
- stash->sec = find_debug_info (abfd, NULL);
+ stash->info_ptr = stash->info_ptr_memory;
+ stash->info_ptr_end = stash->info_ptr + total_size;
+ stash->sec = find_debug_info (debug_bfd, NULL);
stash->sec_info_ptr = stash->info_ptr;
stash->syms = symbols;
+ stash->bfd = debug_bfd;
}
/* A null info_ptr indicates that there is no dwarf2 info
stash->inliner_chain = NULL;
/* Check the previously read comp. units first. */
- for (each = stash->all_comp_units; each; each = each->next_unit)
- if ((symbol->flags & BSF_FUNCTION) == 0
- || comp_unit_contains_address (each, addr))
- {
- found = comp_unit_find_line (each, symbol, addr, filename_ptr,
- linenumber_ptr, stash);
- if (found)
- goto done;
- }
+ if (do_line)
+ {
+ /* The info hash tables use quite a bit of memory. We may not want to
+ always use them. We use some heuristics to decide if and when to
+ turn it on. */
+ if (stash->info_hash_status == STASH_INFO_HASH_OFF)
+ stash_maybe_enable_info_hash_tables (abfd, stash);
+
+ /* Keep info hash table up to date if they are available. Note that we
+ may disable the hash tables if there is any error duing update. */
+ if (stash->info_hash_status == STASH_INFO_HASH_ON)
+ stash_maybe_update_info_hash_tables (stash);
+
+ if (stash->info_hash_status == STASH_INFO_HASH_ON)
+ {
+ found = stash_find_line_fast (stash, symbol, addr, filename_ptr,
+ linenumber_ptr);
+ if (found)
+ goto done;
+ }
+ else
+ {
+ /* Check the previously read comp. units first. */
+ for (each = stash->all_comp_units; each; each = each->next_unit)
+ if ((symbol->flags & BSF_FUNCTION) == 0
+ || comp_unit_contains_address (each, addr))
+ {
+ found = comp_unit_find_line (each, symbol, addr, filename_ptr,
+ linenumber_ptr, stash);
+ if (found)
+ goto done;
+ }
+ }
+ }
+ else
+ {
+ for (each = stash->all_comp_units; each; each = each->next_unit)
+ {
+ found = (comp_unit_contains_address (each, addr)
+ && comp_unit_find_nearest_line (each, addr,
+ filename_ptr,
+ functionname_ptr,
+ linenumber_ptr,
+ stash));
+ if (found)
+ goto done;
+ }
+ }
/* The DWARF2 spec says that the initial length field, and the
offset of the abbreviation table, should both be 4-byte values.
unsigned int offset_size = addr_size;
bfd_byte *info_ptr_unit = stash->info_ptr;
- length = read_4_bytes (abfd, stash->info_ptr);
- /* A 0xffffff length is the DWARF3 way of indicating we use
- 64-bit offsets, instead of 32-bit offsets. */
+ length = read_4_bytes (stash->bfd, stash->info_ptr);
+ /* A 0xffffff length is the DWARF3 way of indicating
+ we use 64-bit offsets, instead of 32-bit offsets. */
if (length == 0xffffffff)
{
offset_size = 8;
- length = read_8_bytes (abfd, stash->info_ptr + 4);
+ length = read_8_bytes (stash->bfd, stash->info_ptr + 4);
stash->info_ptr += 12;
}
/* A zero length is the IRIX way of indicating 64-bit offsets,
else if (length == 0)
{
offset_size = 8;
- length = read_4_bytes (abfd, stash->info_ptr + 4);
+ length = read_4_bytes (stash->bfd, stash->info_ptr + 4);
stash->info_ptr += 8;
}
- /* In the absence of the hints above, we assume addr_size-sized
- offsets, for backward-compatibility with pre-DWARF3 64-bit
- platforms. */
+ /* In the absence of the hints above, we assume 32-bit DWARF2
+ offsets even for targets with 64-bit addresses, because:
+ a) most of the time these targets will not have generated
+ more than 2Gb of debug info and so will not need 64-bit
+ offsets,
+ and
+ b) if they do use 64-bit offsets but they are not using
+ the size hints that are tested for above then they are
+ not conforming to the DWARF3 standard anyway. */
else if (addr_size == 8)
{
- length = read_8_bytes (abfd, stash->info_ptr);
- stash->info_ptr += 8;
+ offset_size = 4;
+ stash->info_ptr += 4;
}
else
stash->info_ptr += 4;
if (length > 0)
{
- each = parse_comp_unit (abfd, stash, length, info_ptr_unit,
+ each = parse_comp_unit (stash, length, info_ptr_unit,
offset_size);
+ if (!each)
+ /* The dwarf information is damaged, don't trust it any
+ more. */
+ break;
stash->info_ptr += length;
+ if (stash->all_comp_units)
+ stash->all_comp_units->prev_unit = each;
+ else
+ stash->last_comp_unit = each;
+
+ each->next_unit = stash->all_comp_units;
+ stash->all_comp_units = each;
+
+ /* DW_AT_low_pc and DW_AT_high_pc are optional for
+ compilation units. If we don't have them (i.e.,
+ unit->high == 0), we need to consult the line info table
+ to see if a compilation unit contains the given
+ address. */
+ if (do_line)
+ found = (((symbol->flags & BSF_FUNCTION) == 0
+ || each->arange.high == 0
+ || comp_unit_contains_address (each, addr))
+ && comp_unit_find_line (each, symbol, addr,
+ filename_ptr,
+ linenumber_ptr,
+ stash));
+ else
+ found = ((each->arange.high == 0
+ || comp_unit_contains_address (each, addr))
+ && comp_unit_find_nearest_line (each, addr,
+ filename_ptr,
+ functionname_ptr,
+ linenumber_ptr,
+ stash));
+
if ((bfd_vma) (stash->info_ptr - stash->sec_info_ptr)
== stash->sec->size)
{
- stash->sec = find_debug_info (abfd, stash->sec);
+ stash->sec = find_debug_info (stash->bfd, stash->sec);
stash->sec_info_ptr = stash->info_ptr;
}
- if (each)
- {
- each->next_unit = stash->all_comp_units;
- stash->all_comp_units = each;
-
- /* DW_AT_low_pc and DW_AT_high_pc are optional for
- compilation units. If we don't have them (i.e.,
- unit->high == 0), we need to consult the line info
- table to see if a compilation unit contains the given
- address. */
- found = (((symbol->flags & BSF_FUNCTION) == 0
- || each->arange.high <= 0
- || comp_unit_contains_address (each, addr))
- && comp_unit_find_line (each, symbol, addr,
- filename_ptr,
- linenumber_ptr,
- stash));
- if (found)
- goto done;
- }
+ if (found)
+ goto done;
}
}
return found;
}
+/* The DWARF2 version of find_nearest_line.
+ Return TRUE if the line is found without error. */
+
+bfd_boolean
+_bfd_dwarf2_find_nearest_line (bfd *abfd,
+ asection *section,
+ asymbol **symbols,
+ bfd_vma offset,
+ const char **filename_ptr,
+ const char **functionname_ptr,
+ unsigned int *linenumber_ptr,
+ unsigned int addr_size,
+ void **pinfo)
+{
+ return find_line (abfd, section, offset, NULL, symbols, filename_ptr,
+ functionname_ptr, linenumber_ptr, addr_size,
+ pinfo);
+}
+
+/* The DWARF2 version of find_line.
+ Return TRUE if the line is found without error. */
+
+bfd_boolean
+_bfd_dwarf2_find_line (bfd *abfd,
+ asymbol **symbols,
+ asymbol *symbol,
+ const char **filename_ptr,
+ unsigned int *linenumber_ptr,
+ unsigned int addr_size,
+ void **pinfo)
+{
+ return find_line (abfd, NULL, 0, symbol, symbols, filename_ptr,
+ NULL, linenumber_ptr, addr_size,
+ pinfo);
+}
+
bfd_boolean
_bfd_dwarf2_find_inliner_info (bfd *abfd ATTRIBUTE_UNUSED,
const char **filename_ptr,
if (stash)
{
struct funcinfo *func = stash->inliner_chain;
+
if (func && func->caller_func)
{
*filename_ptr = func->caller_file;
*functionname_ptr = func->caller_func->name;
*linenumber_ptr = func->caller_line;
stash->inliner_chain = func->caller_func;
- return (TRUE);
+ return TRUE;
}
}
- return (FALSE);
+ return FALSE;
}
void
for (each = stash->all_comp_units; each; each = each->next_unit)
{
struct abbrev_info **abbrevs = each->abbrevs;
+ struct funcinfo *function_table = each->function_table;
+ struct varinfo *variable_table = each->variable_table;
size_t i;
for (i = 0; i < ABBREV_HASH_SIZE; i++)
free (each->line_table->dirs);
free (each->line_table->files);
}
+
+ while (function_table)
+ {
+ if (function_table->file)
+ {
+ free (function_table->file);
+ function_table->file = NULL;
+ }
+
+ if (function_table->caller_file)
+ {
+ free (function_table->caller_file);
+ function_table->caller_file = NULL;
+ }
+ function_table = function_table->prev_func;
+ }
+
+ while (variable_table)
+ {
+ if (variable_table->file)
+ {
+ free (variable_table->file);
+ variable_table->file = NULL;
+ }
+
+ variable_table = variable_table->prev_var;
+ }
}
- free (stash->dwarf_abbrev_buffer);
- free (stash->dwarf_line_buffer);
- free (stash->dwarf_ranges_buffer);
+ if (stash->dwarf_abbrev_buffer)
+ free (stash->dwarf_abbrev_buffer);
+ if (stash->dwarf_line_buffer)
+ free (stash->dwarf_line_buffer);
+ if (stash->dwarf_str_buffer)
+ free (stash->dwarf_str_buffer);
+ if (stash->dwarf_ranges_buffer)
+ free (stash->dwarf_ranges_buffer);
+ if (stash->info_ptr_memory)
+ free (stash->info_ptr_memory);
}
projects / deliverable / binutils-gdb.git / blobdiff