/* MIPS-specific support for ELF
- Copyright (C) 1993-2017 Free Software Foundation, Inc.
+ Copyright (C) 1993-2018 Free Software Foundation, Inc.
Most of the information added by Ian Lance Taylor, Cygnus Support,
<ian@cygnus.com>.
/* Put out word-sized data. */
#define MIPS_ELF_PUT_WORD(abfd, val, ptr) \
- (ABI_64_P (abfd) \
- ? bfd_put_64 (abfd, val, ptr) \
+ (ABI_64_P (abfd) \
+ ? bfd_put_64 (abfd, val, ptr) \
: bfd_put_32 (abfd, val, ptr))
/* The opcode for word-sized loads (LW or LD). */
_bfd_elf_add_dynamic_entry (info, tag, val)
#define MIPS_ELF_RTYPE_TO_HOWTO(abfd, rtype, rela) \
- (get_elf_backend_data (abfd)->elf_backend_mips_rtype_to_howto (rtype, rela))
+ (get_elf_backend_data (abfd)->elf_backend_mips_rtype_to_howto (abfd, rtype, rela))
/* The name of the dynamic relocation section. */
#define MIPS_ELF_REL_DYN_NAME(INFO) \
#define STUB_LW(abfd) \
((ABI_64_P (abfd) \
? 0xdf998010 /* ld t9,0x8010(gp) */ \
- : 0x8f998010)) /* lw t9,0x8010(gp) */
+ : 0x8f998010)) /* lw t9,0x8010(gp) */
#define STUB_MOVE 0x03e07825 /* or t7,ra,zero */
#define STUB_LUI(VAL) (0x3c180000 + (VAL)) /* lui t8,VAL */
#define STUB_JALR 0x0320f809 /* jalr ra,t9 */
/* The name of the dynamic interpreter. This is put in the .interp
section. */
-#define ELF_DYNAMIC_INTERPRETER(abfd) \
- (ABI_N32_P (abfd) ? "/usr/lib32/libc.so.1" \
- : ABI_64_P (abfd) ? "/usr/lib64/libc.so.1" \
+#define ELF_DYNAMIC_INTERPRETER(abfd) \
+ (ABI_N32_P (abfd) ? "/usr/lib32/libc.so.1" \
+ : ABI_64_P (abfd) ? "/usr/lib64/libc.so.1" \
: "/usr/lib/libc.so.1")
#ifdef BFD64
bfd_put_micromips_32 (const bfd *abfd, bfd_vma opcode, bfd_byte *ptr)
{
bfd_put_16 (abfd, (opcode >> 16) & 0xffff, ptr);
- bfd_put_16 (abfd, opcode & 0xffff, ptr + 2);
+ bfd_put_16 (abfd, opcode & 0xffff, ptr + 2);
}
/* microMIPS 32-bit opcode helper retriever. */
&& ! h->need_fn_stub)
{
/* We don't need the fn_stub; the only references to this symbol
- are 16 bit calls. Clobber the size to 0 to prevent it from
- being included in the link. */
+ are 16 bit calls. Clobber the size to 0 to prevent it from
+ being included in the link. */
h->fn_stub->size = 0;
h->fn_stub->flags &= ~SEC_RELOC;
h->fn_stub->reloc_count = 0;
&& ELF_ST_IS_MIPS16 (h->root.other))
{
/* We don't need the call_stub; this is a 16 bit function, so
- calls from other 16 bit functions are OK. Clobber the size
- to 0 to prevent it from being included in the link. */
+ calls from other 16 bit functions are OK. Clobber the size
+ to 0 to prevent it from being included in the link. */
h->call_stub->size = 0;
h->call_stub->flags &= ~SEC_RELOC;
h->call_stub->reloc_count = 0;
&& ELF_ST_IS_MIPS16 (h->root.other))
{
/* We don't need the call_stub; this is a 16 bit function, so
- calls from other 16 bit functions are OK. Clobber the size
- to 0 to prevent it from being included in the link. */
+ calls from other 16 bit functions are OK. Clobber the size
+ to 0 to prevent it from being included in the link. */
h->call_fp_stub->size = 0;
h->call_fp_stub->flags &= ~SEC_RELOC;
h->call_fp_stub->reloc_count = 0;
+--------------+--------------------------------+
| JALX | X| Imm 20:16 | Imm 25:21 |
+--------------+--------------------------------+
- | Immediate 15:0 |
+ | Immediate 15:0 |
+-----------------------------------------------+
JALX is the 5-bit value 00011. X is 0 for jal, 1 for jalx.
big-endian:
+--------+----------------------+
- | | |
- | | targ26-16 |
- |31 26|25 0|
+ | | |
+ | | targ26-16 |
+ |31 26|25 0|
+--------+----------------------+
little-endian:
+----------+------+-------------+
- | | | |
- | sub1 | | sub2 |
- |0 9|10 15|16 31|
+ | | | |
+ | sub1 | | sub2 |
+ |0 9|10 15|16 31|
+----------+--------------------+
where targ26-16 is sub1 followed by sub2 (i.e., the addend field A is
((sub1 << 16) | sub2)).
const char *name;
/* Use undefined class. Also, set class and type for some
- special symbols. */
+ special symbols. */
name = h->root.root.root.string;
if (strcmp (name, mips_elf_dynsym_rtproc_names[0]) == 0
|| strcmp (name, mips_elf_dynsym_rtproc_names[1]) == 0)
h->esym.asym.value =
mips_elf_hash_table (einfo->info)->procedure_count;
}
- else if (strcmp (name, "_gp_disp") == 0 && ! NEWABI_P (einfo->abfd))
- {
- h->esym.asym.sc = scAbs;
- h->esym.asym.st = stLabel;
- h->esym.asym.value = elf_gp (einfo->abfd);
- }
else
h->esym.asym.sc = scUndefined;
}
bfd_boolean target_is_micromips_code_p = FALSE;
struct mips_elf_link_hash_table *htab;
bfd *dynobj;
+ bfd_boolean resolved_to_zero;
dynobj = elf_hash_table (info)->dynobj;
htab = mips_elf_hash_table (info);
*namep = bfd_section_name (input_bfd, sec);
/* For relocations against a section symbol and ones against no
- symbol (absolute relocations) infer the ISA mode from the addend. */
+ symbol (absolute relocations) infer the ISA mode from the addend. */
if (section_p || r_symndx == STN_UNDEF)
{
target_is_16_bit_code_p = (addend & 1) && !micromips_p;
target_is_micromips_code_p = (addend & 1) && micromips_p;
}
/* For relocations against an absolute symbol infer the ISA mode
- from the value of the symbol plus addend. */
+ from the value of the symbol plus addend. */
else if (bfd_is_abs_section (sec))
{
target_is_16_bit_code_p = ((symbol + addend) & 1) && !micromips_p;
}
else
{
+ bfd_boolean reject_undefined
+ = (info->unresolved_syms_in_objects == RM_GENERATE_ERROR
+ || ELF_ST_VISIBILITY (h->root.other) != STV_DEFAULT);
+
(*info->callbacks->undefined_symbol)
(info, h->root.root.root.string, input_bfd,
- input_section, relocation->r_offset,
- (info->unresolved_syms_in_objects == RM_GENERATE_ERROR)
- || ELF_ST_VISIBILITY (h->root.other));
- return bfd_reloc_undefined;
+ input_section, relocation->r_offset, reject_undefined);
+
+ if (reject_undefined)
+ return bfd_reloc_undefined;
+
+ symbol = 0;
}
target_is_16_bit_code_p = ELF_ST_IS_MIPS16 (h->root.other);
sec = h->call_stub;
else
sec = h->call_fp_stub;
- }
+ }
BFD_ASSERT (sec->size > 0);
symbol = sec->output_section->vma + sec->output_offset;
addend = 0;
}
+ resolved_to_zero = (h != NULL
+ && UNDEFWEAK_NO_DYNAMIC_RELOC (info,
+ &h->root));
+
/* If we haven't already determined the GOT offset, and we're going
to need it, get it now. */
switch (r_type)
&& r_symndx != STN_UNDEF
&& (h == NULL
|| h->root.root.type != bfd_link_hash_undefweak
- || ELF_ST_VISIBILITY (h->root.other) == STV_DEFAULT)
+ || (ELF_ST_VISIBILITY (h->root.other) == STV_DEFAULT
+ && !resolved_to_zero))
&& (input_section->flags & SEC_ALLOC) != 0)
{
/* If we're creating a shared library, then we can't know
if ((was_local_p || h->root.root.type != bfd_link_hash_undefweak)
&& (*cross_mode_jump_p
? (value & 3) != (r_type == R_MIPS_26)
- : (value & ((1 << shift) - 1)) != (r_type != R_MIPS_26)))
+ : (value & ((1 << shift) - 1)) != (r_type != R_MIPS_26)))
return bfd_reloc_outofrange;
value >>= shift;
else
{
/* For MIPS16 ABI code we generate this sequence
- 0: li $v0,%hi(_gp_disp)
- 4: addiupc $v1,%lo(_gp_disp)
- 8: sll $v0,16
+ 0: li $v0,%hi(_gp_disp)
+ 4: addiupc $v1,%lo(_gp_disp)
+ 8: sll $v0,16
12: addu $v0,$v1
14: move $gp,$v0
So the offsets of hi and lo relocs are the same, but the
addend = _bfd_mips_elf_sign_extend (addend, 18);
/* No need to exclude weak undefined symbols here as they resolve
- to 0 and never set `*cross_mode_jump_p', so this alignment check
- will never trigger for them. */
+ to 0 and never set `*cross_mode_jump_p', so this alignment check
+ will never trigger for them. */
if (*cross_mode_jump_p
? ((symbol + addend) & 3) != 1
: ((symbol + addend) & 3) != 0)
: opcode == 0x1d)
{
info->callbacks->einfo
- (_("%X%H: Unsupported JALX to the same ISA mode\n"),
+ (_("%X%H: unsupported JALX to the same ISA mode\n"),
input_bfd, input_section, relocation->r_offset);
return TRUE;
}
}
/* If the opcode is not JAL or JALX, there's a problem. We cannot
- convert J or JALS to JALX. */
+ convert J or JALS to JALX. */
if (!ok)
{
info->callbacks->einfo
- (_("%X%H: Unsupported jump between ISA modes; "
+ (_("%X%H: unsupported jump between ISA modes; "
"consider recompiling with interlinking enabled\n"),
input_bfd, input_section, relocation->r_offset);
return TRUE;
bfd_boolean ok = FALSE;
bfd_vma opcode = x >> 16;
bfd_vma jalx_opcode = 0;
+ bfd_vma sign_bit = 0;
bfd_vma addr;
bfd_vma dest;
{
ok = opcode == 0x4060;
jalx_opcode = 0x3c;
+ sign_bit = 0x10000;
value <<= 1;
}
else if (r_type == R_MIPS_PC16 || r_type == R_MIPS_GNU_REL16_S2)
{
ok = opcode == 0x411;
jalx_opcode = 0x1d;
+ sign_bit = 0x20000;
value <<= 2;
}
+ input_section->output_offset
+ relocation->r_offset
+ 4);
- dest = addr + (((value & 0x3ffff) ^ 0x20000) - 0x20000);
+ dest = (addr
+ + (((value & ((sign_bit << 1) - 1)) ^ sign_bit) - sign_bit));
if ((addr >> 28) << 28 != (dest >> 28) << 28)
{
info->callbacks->einfo
- (_("%X%H: Cannot convert branch between ISA modes "
+ (_("%X%H: cannot convert branch between ISA modes "
"to JALX: relocation out of range\n"),
input_bfd, input_section, relocation->r_offset);
return TRUE;
else if (!mips_elf_hash_table (info)->ignore_branch_isa)
{
info->callbacks->einfo
- (_("%X%H: Unsupported branch between ISA modes\n"),
+ (_("%X%H: unsupported branch between ISA modes\n"),
input_bfd, input_section, relocation->r_offset);
return TRUE;
}
We therefore take the following approach:
- If ABFD contains a .gcc_compiled_longXX section, use it to
- determine the pointer size.
+ determine the pointer size.
- Otherwise check the type of the first relocation. Assume that
- the LP64 ABI is being used if the relocation is of type R_MIPS_64.
+ the LP64 ABI is being used if the relocation is of type R_MIPS_64.
- Otherwise punt.
{
bfd_byte buf[4];
- BFD_ASSERT (hdr->sh_size == sizeof (Elf32_External_RegInfo));
BFD_ASSERT (hdr->contents == NULL);
+ if (hdr->sh_size != sizeof (Elf32_External_RegInfo))
+ {
+ _bfd_error_handler
+ (_("%pB: incorrect `.reginfo' section size; "
+ "expected %" PRIu64 ", got %" PRIu64),
+ abfd, (uint64_t) sizeof (Elf32_External_RegInfo),
+ (uint64_t) hdr->sh_size);
+ bfd_set_error (bfd_error_bad_value);
+ return FALSE;
+ }
+
if (bfd_seek (abfd,
hdr->sh_offset + sizeof (Elf32_External_RegInfo) - 4,
SEEK_SET) != 0)
{
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: Warning: bad `%s' option size %u smaller than"
+ (_("%pB: warning: bad `%s' option size %u smaller than"
" its header"),
abfd, MIPS_ELF_OPTIONS_SECTION_NAME (abfd), intopt.size);
break;
break;
case SHT_MIPS_DWARF:
if (! CONST_STRNEQ (name, ".debug_")
- && ! CONST_STRNEQ (name, ".zdebug_"))
+ && ! CONST_STRNEQ (name, ".zdebug_"))
return FALSE;
break;
case SHT_MIPS_SYMBOL_LIB:
{
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: Warning: bad `%s' option size %u smaller than"
+ (_("%pB: warning: bad `%s' option size %u smaller than"
" its header"),
abfd, MIPS_ELF_OPTIONS_SECTION_NAME (abfd), intopt.size);
break;
{
hdr->sh_type = SHT_MIPS_DEBUG;
/* In a shared object on IRIX 5.3, the .mdebug section has an
- entsize of 0. FIXME: Does this matter? */
+ entsize of 0. FIXME: Does this matter? */
if (SGI_COMPAT (abfd) && (abfd->flags & DYNAMIC) != 0)
hdr->sh_entsize = 0;
else
{
hdr->sh_type = SHT_MIPS_REGINFO;
/* In a shared object on IRIX 5.3, the .reginfo section has an
- entsize of 0x18. FIXME: Does this matter? */
+ entsize of 0x18. FIXME: Does this matter? */
if (SGI_COMPAT (abfd))
{
if ((abfd->flags & DYNAMIC) != 0)
hdr->sh_entsize = sizeof (Elf_External_ABIFlags_v0);
}
else if (CONST_STRNEQ (name, ".debug_")
- || CONST_STRNEQ (name, ".zdebug_"))
+ || CONST_STRNEQ (name, ".zdebug_"))
{
hdr->sh_type = SHT_MIPS_DWARF;
{
hdr->sh_type = SHT_MIPS_SYMBOL_LIB;
/* The sh_link and sh_info fields are set in
- final_write_processing. */
+ final_write_processing. */
}
else if (CONST_STRNEQ (name, ".MIPS.events")
|| CONST_STRNEQ (name, ".MIPS.post_rel"))
elf_text_symbol->section = elf_text_section;
}
/* This code used to do *secp = bfd_und_section_ptr if
- bfd_link_pic (info). I don't know why, and that doesn't make sense,
- so I took it out. */
+ bfd_link_pic (info). I don't know why, and that doesn't make sense,
+ so I took it out. */
*secp = mips_elf_tdata (abfd)->elf_text_section;
break;
elf_data_symbol->section = elf_data_section;
}
/* This code used to do *secp = bfd_und_section_ptr if
- bfd_link_pic (info). I don't know why, and that doesn't make sense,
- so I took it out. */
+ bfd_link_pic (info). I don't know why, and that doesn't make sense,
+ so I took it out. */
*secp = mips_elf_tdata (abfd)->elf_data_section;
break;
unsigned long r_symndx;
/* Look at the relocation information to figure out which symbol
- this is for. */
+ this is for. */
r_symndx = mips16_stub_symndx (bed, sec, relocs, rel_end);
if (r_symndx == 0)
{
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: Warning: cannot determine the target function for"
+ (_("%pB: warning: cannot determine the target function for"
" stub section `%s'"),
abfd, name);
bfd_set_error (bfd_error_bad_value);
asection *o;
/* This stub is for a local symbol. This stub will only be
- needed if there is some relocation in this BFD, other
- than a 16 bit function call, which refers to this symbol. */
+ needed if there is some relocation in this BFD, other
+ than a 16 bit function call, which refers to this symbol. */
for (o = abfd->sections; o != NULL; o = o->next)
{
Elf_Internal_Rela *sec_relocs;
if (o == NULL)
{
/* There is no non-call reloc for this stub, so we do
- not need it. Since this function is called before
- the linker maps input sections to output sections, we
- can easily discard it by setting the SEC_EXCLUDE
- flag. */
+ not need it. Since this function is called before
+ the linker maps input sections to output sections, we
+ can easily discard it by setting the SEC_EXCLUDE
+ flag. */
sec->flags |= SEC_EXCLUDE;
return TRUE;
}
/* Record this stub in an array of local symbol stubs for
- this BFD. */
+ this BFD. */
if (mips_elf_tdata (abfd)->local_stubs == NULL)
{
unsigned long symcount;
mips_elf_tdata (abfd)->local_stubs[r_symndx] = sec;
/* We don't need to set mips16_stubs_seen in this case.
- That flag is used to see whether we need to look through
- the global symbol table for stubs. We don't need to set
- it here, because we just have a local stub. */
+ That flag is used to see whether we need to look through
+ the global symbol table for stubs. We don't need to set
+ it here, because we just have a local stub. */
}
else
{
asection **loc;
/* Look at the relocation information to figure out which symbol
- this is for. */
+ this is for. */
r_symndx = mips16_stub_symndx (bed, sec, relocs, rel_end);
if (r_symndx == 0)
{
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: Warning: cannot determine the target function for"
+ (_("%pB: warning: cannot determine the target function for"
" stub section `%s'"),
abfd, name);
bfd_set_error (bfd_error_bad_value);
asection *o;
/* This stub is for a local symbol. This stub will only be
- needed if there is some relocation (R_MIPS16_26) in this BFD
- that refers to this symbol. */
+ needed if there is some relocation (R_MIPS16_26) in this BFD
+ that refers to this symbol. */
for (o = abfd->sections; o != NULL; o = o->next)
{
Elf_Internal_Rela *sec_relocs;
if (o == NULL)
{
/* There is no non-call reloc for this stub, so we do
- not need it. Since this function is called before
- the linker maps input sections to output sections, we
- can easily discard it by setting the SEC_EXCLUDE
- flag. */
+ not need it. Since this function is called before
+ the linker maps input sections to output sections, we
+ can easily discard it by setting the SEC_EXCLUDE
+ flag. */
sec->flags |= SEC_EXCLUDE;
return TRUE;
}
/* Record this stub in an array of local symbol call_stubs for
- this BFD. */
+ this BFD. */
if (mips_elf_tdata (abfd)->local_call_stubs == NULL)
{
unsigned long symcount;
mips_elf_tdata (abfd)->local_call_stubs[r_symndx] = sec;
/* We don't need to set mips16_stubs_seen in this case.
- That flag is used to see whether we need to look through
- the global symbol table for stubs. We don't need to set
- it here, because we just have a local stub. */
+ That flag is used to see whether we need to look through
+ the global symbol table for stubs. We don't need to set
+ it here, because we just have a local stub. */
}
else
{
{
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: Malformed reloc detected for section %s"),
+ (_("%pB: malformed reloc detected for section %s"),
abfd, name);
bfd_set_error (bfd_error_bad_value);
return FALSE;
while (h->root.type == bfd_link_hash_indirect
|| h->root.type == bfd_link_hash_warning)
h = (struct elf_link_hash_entry *) h->root.u.i.link;
-
- /* PR15323, ref flags aren't set for references in the
- same object. */
- h->root.non_ir_ref_regular = 1;
}
}
{
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: GOT reloc at %#Lx not expected in executables"),
- abfd, rel->r_offset);
+ (_("%pB: GOT reloc at %#" PRIx64 " not expected in executables"),
+ abfd, (uint64_t) rel->r_offset);
bfd_set_error (bfd_error_bad_value);
return FALSE;
}
{
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: CALL16 reloc at %#Lx not against global symbol"),
- abfd, rel->r_offset);
+ (_("%pB: CALL16 reloc at %#" PRIx64 " not against global symbol"),
+ abfd, (uint64_t) rel->r_offset);
bfd_set_error (bfd_error_bad_value);
return FALSE;
}
}
/* Record the need for a PLT entry. At this point we don't know
- yet if we are going to create a PLT in the first place, but
- we only record whether the relocation requires a standard MIPS
- or a compressed code entry anyway. If we don't make a PLT after
- all, then we'll just ignore these arrangements. Likewise if
- a PLT entry is not created because the symbol is satisfied
- locally. */
+ yet if we are going to create a PLT in the first place, but
+ we only record whether the relocation requires a standard MIPS
+ or a compressed code entry anyway. If we don't make a PLT after
+ all, then we'll just ignore these arrangements. Likewise if
+ a PLT entry is not created because the symbol is satisfied
+ locally. */
if (h != NULL
&& (branch_reloc_p (r_type)
|| mips16_branch_reloc_p (r_type)
howto = MIPS_ELF_RTYPE_TO_HOWTO (abfd, r_type, FALSE);
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: relocation %s against `%s' can not be used"
+ (_("%pB: relocation %s against `%s' can not be used"
" when making a shared object; recompile with -fPIC"),
abfd, howto->name,
(h) ? h->root.root.string : "a local symbol");
{
/* Do not copy relocations for undefined weak symbols with
non-default visibility. */
- if (ELF_ST_VISIBILITY (h->other) != STV_DEFAULT)
+ if (ELF_ST_VISIBILITY (h->other) != STV_DEFAULT
+ || UNDEFWEAK_NO_DYNAMIC_RELOC (info, h))
do_copy = FALSE;
/* Make sure undefined weak symbols are output as a dynamic
/* Make sure we know what is going on here. */
BFD_ASSERT (dynobj != NULL
&& (h->needs_plt
- || h->u.weakdef != NULL
+ || h->is_weakalias
|| (h->def_dynamic
&& h->ref_regular
&& !h->def_regular)));
bfd_boolean newabi_p = NEWABI_P (info->output_bfd);
/* If this is the first symbol to need a PLT entry, then make some
- basic setup. Also work out PLT entry sizes. We'll need them
- for PLT offset calculations. */
+ basic setup. Also work out PLT entry sizes. We'll need them
+ for PLT offset calculations. */
if (htab->plt_mips_offset + htab->plt_comp_offset == 0)
{
BFD_ASSERT (htab->root.sgotplt->size == 0);
return FALSE;
/* There are no defined MIPS16 or microMIPS PLT entries for VxWorks,
- n32 or n64, so always use a standard entry there.
+ n32 or n64, so always use a standard entry there.
- If the symbol has a MIPS16 call stub and gets a PLT entry, then
- all MIPS16 calls will go via that stub, and there is no benefit
- to having a MIPS16 entry. And in the case of call_stub a
- standard entry actually has to be used as the stub ends with a J
- instruction. */
+ If the symbol has a MIPS16 call stub and gets a PLT entry, then
+ all MIPS16 calls will go via that stub, and there is no benefit
+ to having a MIPS16 entry. And in the case of call_stub a
+ standard entry actually has to be used as the stub ends with a J
+ instruction. */
if (newabi_p
|| htab->is_vxworks
|| hmips->call_stub
}
/* Otherwise, if there are no direct calls to the function, we
- have a free choice of whether to use standard or compressed
- entries. Prefer microMIPS entries if the object is known to
- contain microMIPS code, so that it becomes possible to create
- pure microMIPS binaries. Prefer standard entries otherwise,
- because MIPS16 ones are no smaller and are usually slower. */
+ have a free choice of whether to use standard or compressed
+ entries. Prefer microMIPS entries if the object is known to
+ contain microMIPS code, so that it becomes possible to create
+ pure microMIPS binaries. Prefer standard entries otherwise,
+ because MIPS16 ones are no smaller and are usually slower. */
if (!h->plt.plist->need_mips && !h->plt.plist->need_comp)
{
if (micromips_p)
/* If this is a weak symbol, and there is a real definition, the
processor independent code will have arranged for us to see the
real definition first, and we can just use the same value. */
- if (h->u.weakdef != NULL)
+ if (h->is_weakalias)
{
- BFD_ASSERT (h->u.weakdef->root.type == bfd_link_hash_defined
- || h->u.weakdef->root.type == bfd_link_hash_defweak);
- h->root.u.def.section = h->u.weakdef->root.u.def.section;
- h->root.u.def.value = h->u.weakdef->root.u.def.value;
+ struct elf_link_hash_entry *def = weakdef (h);
+ BFD_ASSERT (def->root.type == bfd_link_hash_defined);
+ h->root.u.def.section = def->root.u.def.section;
+ h->root.u.def.value = def->root.u.def.value;
return TRUE;
}
/* The .reginfo section has a fixed size. */
sect = bfd_get_section_by_name (output_bfd, ".reginfo");
if (sect != NULL)
- bfd_set_section_size (output_bfd, sect, sizeof (Elf32_External_RegInfo));
+ {
+ bfd_set_section_size (output_bfd, sect, sizeof (Elf32_External_RegInfo));
+ sect->flags |= SEC_FIXED_SIZE | SEC_HAS_CONTENTS;
+ }
/* The .MIPS.abiflags section has a fixed size. */
sect = bfd_get_section_by_name (output_bfd, ".MIPS.abiflags");
if (sect != NULL)
- bfd_set_section_size (output_bfd, sect, sizeof (Elf_External_ABIFlags_v0));
+ {
+ bfd_set_section_size (output_bfd, sect,
+ sizeof (Elf_External_ABIFlags_v0));
+ sect->flags |= SEC_FIXED_SIZE | SEC_HAS_CONTENTS;
+ }
hti.info = info;
hti.output_bfd = output_bfd;
}
val += isa_bit;
/* For VxWorks, point at the PLT load stub rather than the lazy
- resolution stub; this stub will become the canonical function
- address. */
+ resolution stub; this stub will become the canonical function
+ address. */
if (htab->is_vxworks)
val += 8;
}
/* Figure out the size of the PLT header if we know that we
- are using it. For the sake of cache alignment always use
- a standard header whenever any standard entries are present
- even if microMIPS entries are present as well. This also
- lets the microMIPS header rely on the value of $v0 only set
- by microMIPS entries, for a small size reduction.
+ are using it. For the sake of cache alignment always use
+ a standard header whenever any standard entries are present
+ even if microMIPS entries are present as well. This also
+ lets the microMIPS header rely on the value of $v0 only set
+ by microMIPS entries, for a small size reduction.
- Set symbol table entry values for symbols that use the
- address of their PLT entry now that we can calculate it.
+ Set symbol table entry values for symbols that use the
+ address of their PLT entry now that we can calculate it.
- Also create the _PROCEDURE_LINKAGE_TABLE_ symbol if we
- haven't already in _bfd_elf_create_dynamic_sections. */
+ Also create the _PROCEDURE_LINKAGE_TABLE_ symbol if we
+ haven't already in _bfd_elf_create_dynamic_sections. */
if (htab->root.splt && htab->plt_mips_offset + htab->plt_comp_offset != 0)
{
bfd_boolean micromips_p = (MICROMIPS_P (output_bfd)
asection *target;
/* If this relocation section applies to a read only
- section, then we probably need a DT_TEXTREL entry.
- If the relocation section is .rel(a).dyn, we always
- assert a DT_TEXTREL entry rather than testing whether
- there exists a relocation to a read only section or
- not. */
+ section, then we probably need a DT_TEXTREL entry.
+ If the relocation section is .rel(a).dyn, we always
+ assert a DT_TEXTREL entry rather than testing whether
+ there exists a relocation to a read only section or
+ not. */
outname = bfd_get_section_name (output_bfd,
s->output_section);
target = bfd_get_section_by_name (output_bfd, outname + 4);
reloc_howto_type *howto;
bfd_boolean cross_mode_jump_p = FALSE;
/* TRUE if the relocation is a RELA relocation, rather than a
- REL relocation. */
+ REL relocation. */
bfd_boolean rela_relocation_p = TRUE;
unsigned int r_type = ELF_R_TYPE (output_bfd, rel->r_info);
const char *msg;
sec);
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: Can't find matching LO16 reloc against `%s'"
- " for %s at %#Lx in section `%A'"),
+ (_("%pB: can't find matching LO16 reloc against `%s'"
+ " for %s at %#" PRIx64 " in section `%pA'"),
input_bfd, name,
- howto->name, rel->r_offset, input_section);
+ howto->name, (uint64_t) rel->r_offset, input_section);
}
}
else
msg = NULL;
if (jal_reloc_p (howto->type))
msg = (cross_mode_jump_p
- ? _("Cannot convert a jump to JALX "
+ ? _("cannot convert a jump to JALX "
"for a non-word-aligned address")
: (howto->type == R_MIPS16_26
- ? _("Jump to a non-word-aligned address")
- : _("Jump to a non-instruction-aligned address")));
+ ? _("jump to a non-word-aligned address")
+ : _("jump to a non-instruction-aligned address")));
else if (b_reloc_p (howto->type))
msg = (cross_mode_jump_p
- ? _("Cannot convert a branch to JALX "
+ ? _("cannot convert a branch to JALX "
"for a non-word-aligned address")
- : _("Branch to a non-instruction-aligned address"));
+ : _("branch to a non-instruction-aligned address"));
else if (aligned_pcrel_reloc_p (howto->type))
msg = _("PC-relative load from unaligned address");
if (msg)
bfd_put_32 (output_bfd, header_address, loc);
/* Now handle the PLT itself. First the standard entry (the order
- does not matter, we just have to pick one). */
+ does not matter, we just have to pick one). */
if (h->plt.plist->mips_offset != MINUS_ONE)
{
const bfd_vma *plt_entry;
{
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: `%A' offset of %Ld from `%A' "
+ (_("%pB: `%pA' offset of %" PRId64 " from `%pA' "
"beyond the range of ADDIUPC"),
output_bfd,
htab->root.sgotplt->output_section,
- gotpc_offset,
+ (int64_t) gotpc_offset,
htab->root.splt->output_section);
bfd_set_error (bfd_error_no_error);
return FALSE;
sym->st_info = ELF_ST_INFO (STB_GLOBAL, STT_SECTION);
sym->st_value = 1;
}
- else if (strcmp (name, "_gp_disp") == 0 && ! NEWABI_P (output_bfd))
- {
- sym->st_shndx = SHN_ABS;
- sym->st_info = ELF_ST_INFO (STB_GLOBAL, STT_SECTION);
- sym->st_value = elf_gp (output_bfd);
- }
else if (SGI_COMPAT (output_bfd))
{
if (strcmp (name, mips_elf_dynsym_rtproc_names[0]) == 0
{
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: `%A' offset of %Ld from `%A' beyond the range of ADDIUPC"),
+ (_("%pB: `%pA' offset of %" PRId64 " from `%pA' "
+ "beyond the range of ADDIUPC"),
output_bfd,
htab->root.sgotplt->output_section,
- gotpc_offset,
+ (int64_t) gotpc_offset,
htab->root.splt->output_section);
bfd_set_error (bfd_error_no_error);
return FALSE;
return _bfd_elf_gc_mark_hook (sec, info, rel, h, sym);
}
-/* Update the got entry reference counts for the section being removed. */
-
-bfd_boolean
-_bfd_mips_elf_gc_sweep_hook (bfd *abfd ATTRIBUTE_UNUSED,
- struct bfd_link_info *info ATTRIBUTE_UNUSED,
- asection *sec ATTRIBUTE_UNUSED,
- const Elf_Internal_Rela *relocs ATTRIBUTE_UNUSED)
-{
-#if 0
- Elf_Internal_Shdr *symtab_hdr;
- struct elf_link_hash_entry **sym_hashes;
- bfd_signed_vma *local_got_refcounts;
- const Elf_Internal_Rela *rel, *relend;
- unsigned long r_symndx;
- struct elf_link_hash_entry *h;
-
- if (bfd_link_relocatable (info))
- return TRUE;
-
- symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
- sym_hashes = elf_sym_hashes (abfd);
- local_got_refcounts = elf_local_got_refcounts (abfd);
-
- relend = relocs + sec->reloc_count;
- for (rel = relocs; rel < relend; rel++)
- switch (ELF_R_TYPE (abfd, rel->r_info))
- {
- case R_MIPS16_GOT16:
- case R_MIPS16_CALL16:
- case R_MIPS_GOT16:
- case R_MIPS_CALL16:
- case R_MIPS_CALL_HI16:
- case R_MIPS_CALL_LO16:
- case R_MIPS_GOT_HI16:
- case R_MIPS_GOT_LO16:
- case R_MIPS_GOT_DISP:
- case R_MIPS_GOT_PAGE:
- case R_MIPS_GOT_OFST:
- case R_MICROMIPS_GOT16:
- case R_MICROMIPS_CALL16:
- case R_MICROMIPS_CALL_HI16:
- case R_MICROMIPS_CALL_LO16:
- case R_MICROMIPS_GOT_HI16:
- case R_MICROMIPS_GOT_LO16:
- case R_MICROMIPS_GOT_DISP:
- case R_MICROMIPS_GOT_PAGE:
- case R_MICROMIPS_GOT_OFST:
- /* ??? It would seem that the existing MIPS code does no sort
- of reference counting or whatnot on its GOT and PLT entries,
- so it is not possible to garbage collect them at this time. */
- break;
-
- default:
- break;
- }
-#endif
-
- return TRUE;
-}
-
/* Prevent .MIPS.abiflags from being discarded with --gc-sections. */
bfd_boolean
bfd_boolean
_bfd_mips_elf_write_section (bfd *output_bfd,
struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
- asection *sec, bfd_byte *contents)
+ asection *sec, bfd_byte *contents)
{
bfd_byte *to, *from, *end;
int i;
line_ptr, discriminator_ptr,
dwarf_debug_sections,
ABI_64_P (abfd) ? 8 : 0,
- &elf_tdata (abfd)->dwarf2_find_line_info))
- return TRUE;
+ &elf_tdata (abfd)->dwarf2_find_line_info)
+ || _bfd_dwarf1_find_nearest_line (abfd, symbols, section, offset,
+ filename_ptr, functionname_ptr,
+ line_ptr))
+ {
+ /* PR 22789: If the function name or filename was not found through
+ the debug information, then try an ordinary lookup instead. */
+ if ((functionname_ptr != NULL && *functionname_ptr == NULL)
+ || (filename_ptr != NULL && *filename_ptr == NULL))
+ {
+ /* Do not override already discovered names. */
+ if (functionname_ptr != NULL && *functionname_ptr != NULL)
+ functionname_ptr = NULL;
- if (_bfd_dwarf1_find_nearest_line (abfd, symbols, section, offset,
- filename_ptr, functionname_ptr,
- line_ptr))
- return TRUE;
+ if (filename_ptr != NULL && *filename_ptr != NULL)
+ filename_ptr = NULL;
+
+ _bfd_elf_find_function (abfd, symbols, section, offset,
+ filename_ptr, functionname_ptr);
+ }
+
+ return TRUE;
+ }
msec = bfd_get_section_by_name (abfd, ".mdebug");
if (msec != NULL)
mips_elf_tdata (abfd)->find_line_info = fi;
/* Note that we don't bother to ever free this information.
- find_nearest_line is either called all the time, as in
- objdump -l, so the information should be saved, or it is
- rarely called, as in ld error messages, so the memory
- wasted is unimportant. Still, it would probably be a
- good idea for free_cached_info to throw it away. */
+ find_nearest_line is either called all the time, as in
+ objdump -l, so the information should be saved, or it is
+ rarely called, as in ld error messages, so the memory
+ wasted is unimportant. Still, it would probably be a
+ good idea for free_cached_info to throw it away. */
}
if (_bfd_ecoff_locate_line (abfd, section, offset, &fi->d, swap,
int fndopc;
/* The number of bytes to delete for relaxation and from where
- to delete these bytes starting at irel->r_offset. */
+ to delete these bytes starting at irel->r_offset. */
int delcnt = 0;
int deloff = 0;
/* If this isn't something that can be relaxed, then ignore
- this reloc. */
+ this reloc. */
if (r_type != R_MICROMIPS_HI16
&& r_type != R_MICROMIPS_PC16_S1
&& r_type != R_MICROMIPS_26_S1)
/* For simplicity of coding, we are going to modify the
- section contents, the section relocs, and the BFD symbol
- table. We must tell the rest of the code not to free up this
- information. It would be possible to instead create a table
- of changes which have to be made, as is done in coff-mips.c;
- that would be more work, but would require less memory when
- the linker is run. */
+ section contents, the section relocs, and the BFD symbol
+ table. We must tell the rest of the code not to free up this
+ information. It would be possible to instead create a table
+ of changes which have to be made, as is done in coff-mips.c;
+ that would be more work, but would require less memory when
+ the linker is run. */
/* Only 32-bit instructions relaxed. */
if (irel->r_offset + 4 > sec->size)
opcode = bfd_get_micromips_32 (abfd, ptr);
/* This is the pc-relative distance from the instruction the
- relocation is applied to, to the symbol referred. */
+ relocation is applied to, to the symbol referred. */
pcrval = (symval
- (sec->output_section->vma + sec->output_offset)
- irel->r_offset);
/* R_MICROMIPS_HI16 / LUI relaxation to nil, performing relaxation
- of corresponding R_MICROMIPS_LO16 to R_MICROMIPS_HI0_LO16 or
- R_MICROMIPS_PC23_S2. The R_MICROMIPS_PC23_S2 condition is
+ of corresponding R_MICROMIPS_LO16 to R_MICROMIPS_HI0_LO16 or
+ R_MICROMIPS_PC23_S2. The R_MICROMIPS_PC23_S2 condition is
- (symval % 4 == 0 && IS_BITSIZE (pcrval, 25))
+ (symval % 4 == 0 && IS_BITSIZE (pcrval, 25))
- where pcrval has first to be adjusted to apply against the LO16
- location (we make the adjustment later on, when we have figured
- out the offset). */
+ where pcrval has first to be adjusted to apply against the LO16
+ location (we make the adjustment later on, when we have figured
+ out the offset). */
if (r_type == R_MICROMIPS_HI16 && MATCH (opcode, lui_insn))
{
bfd_boolean bzc = FALSE;
irel[1].r_info = ELF32_R_INFO (r_symndx, R_MICROMIPS_HI0_LO16);
/* Instructions using R_MICROMIPS_LO16 have the base or
- source register in bits 20:16. This register becomes $0
- (zero) as the result of the R_MICROMIPS_HI16 being 0. */
+ source register in bits 20:16. This register becomes $0
+ (zero) as the result of the R_MICROMIPS_HI16 being 0. */
nextopc &= ~0x001f0000;
bfd_put_16 (abfd, (nextopc >> 16) & 0xffff,
contents + irel[1].r_offset);
}
/* Compact branch relaxation -- due to the multitude of macros
- employed by the compiler/assembler, compact branches are not
- always generated. Obviously, this can/will be fixed elsewhere,
- but there is no drawback in double checking it here. */
+ employed by the compiler/assembler, compact branches are not
+ always generated. Obviously, this can/will be fixed elsewhere,
+ but there is no drawback in double checking it here. */
else if (r_type == R_MICROMIPS_PC16_S1
&& irel->r_offset + 5 < sec->size
&& ((fndopc = find_match (opcode, bz_rs_insns_32)) >= 0
}
/* R_MICROMIPS_PC16_S1 relaxation to R_MICROMIPS_PC10_S1. We need
- to check the distance from the next instruction, so subtract 2. */
+ to check the distance from the next instruction, so subtract 2. */
else if (!insn32
&& r_type == R_MICROMIPS_PC16_S1
&& IS_BITSIZE (pcrval - 2, 11)
}
/* R_MICROMIPS_PC16_S1 relaxation to R_MICROMIPS_PC7_S1. We need
- to check the distance from the next instruction, so subtract 2. */
+ to check the distance from the next instruction, so subtract 2. */
else if (!insn32
&& r_type == R_MICROMIPS_PC16_S1
&& IS_BITSIZE (pcrval - 2, 8)
if (relaxed)
{
/* JAL with 32-bit delay slot that is changed to a JALS
- with 16-bit delay slot. */
+ with 16-bit delay slot. */
bfd_put_micromips_32 (abfd, jal_insn_32_bd16.match, ptr);
/* Delete 2 bytes from irel->r_offset + 6. */
{
switch (isa_ext)
{
- case AFL_EXT_3900: return bfd_mach_mips3900;
- case AFL_EXT_4010: return bfd_mach_mips4010;
- case AFL_EXT_4100: return bfd_mach_mips4100;
- case AFL_EXT_4111: return bfd_mach_mips4111;
- case AFL_EXT_4120: return bfd_mach_mips4120;
- case AFL_EXT_4650: return bfd_mach_mips4650;
- case AFL_EXT_5400: return bfd_mach_mips5400;
- case AFL_EXT_5500: return bfd_mach_mips5500;
- case AFL_EXT_5900: return bfd_mach_mips5900;
- case AFL_EXT_10000: return bfd_mach_mips10000;
+ case AFL_EXT_3900: return bfd_mach_mips3900;
+ case AFL_EXT_4010: return bfd_mach_mips4010;
+ case AFL_EXT_4100: return bfd_mach_mips4100;
+ case AFL_EXT_4111: return bfd_mach_mips4111;
+ case AFL_EXT_4120: return bfd_mach_mips4120;
+ case AFL_EXT_4650: return bfd_mach_mips4650;
+ case AFL_EXT_5400: return bfd_mach_mips5400;
+ case AFL_EXT_5500: return bfd_mach_mips5500;
+ case AFL_EXT_5900: return bfd_mach_mips5900;
+ case AFL_EXT_10000: return bfd_mach_mips10000;
case AFL_EXT_LOONGSON_2E: return bfd_mach_mips_loongson_2e;
case AFL_EXT_LOONGSON_2F: return bfd_mach_mips_loongson_2f;
case AFL_EXT_LOONGSON_3A: return bfd_mach_mips_loongson_3a;
- case AFL_EXT_SB1: return bfd_mach_mips_sb1;
+ case AFL_EXT_SB1: return bfd_mach_mips_sb1;
case AFL_EXT_OCTEON: return bfd_mach_mips_octeon;
case AFL_EXT_OCTEONP: return bfd_mach_mips_octeonp;
case AFL_EXT_OCTEON2: return bfd_mach_mips_octeon2;
- case AFL_EXT_XLR: return bfd_mach_mips_xlr;
- default: return bfd_mach_mips3000;
+ case AFL_EXT_XLR: return bfd_mach_mips_xlr;
+ default: return bfd_mach_mips3000;
}
}
{
switch (bfd_get_mach (abfd))
{
- case bfd_mach_mips3900: return AFL_EXT_3900;
- case bfd_mach_mips4010: return AFL_EXT_4010;
- case bfd_mach_mips4100: return AFL_EXT_4100;
- case bfd_mach_mips4111: return AFL_EXT_4111;
- case bfd_mach_mips4120: return AFL_EXT_4120;
- case bfd_mach_mips4650: return AFL_EXT_4650;
- case bfd_mach_mips5400: return AFL_EXT_5400;
- case bfd_mach_mips5500: return AFL_EXT_5500;
- case bfd_mach_mips5900: return AFL_EXT_5900;
- case bfd_mach_mips10000: return AFL_EXT_10000;
+ case bfd_mach_mips3900: return AFL_EXT_3900;
+ case bfd_mach_mips4010: return AFL_EXT_4010;
+ case bfd_mach_mips4100: return AFL_EXT_4100;
+ case bfd_mach_mips4111: return AFL_EXT_4111;
+ case bfd_mach_mips4120: return AFL_EXT_4120;
+ case bfd_mach_mips4650: return AFL_EXT_4650;
+ case bfd_mach_mips5400: return AFL_EXT_5400;
+ case bfd_mach_mips5500: return AFL_EXT_5500;
+ case bfd_mach_mips5900: return AFL_EXT_5900;
+ case bfd_mach_mips10000: return AFL_EXT_10000;
case bfd_mach_mips_loongson_2e: return AFL_EXT_LOONGSON_2E;
case bfd_mach_mips_loongson_2f: return AFL_EXT_LOONGSON_2F;
case bfd_mach_mips_loongson_3a: return AFL_EXT_LOONGSON_3A;
- case bfd_mach_mips_sb1: return AFL_EXT_SB1;
- case bfd_mach_mips_octeon: return AFL_EXT_OCTEON;
- case bfd_mach_mips_octeonp: return AFL_EXT_OCTEONP;
- case bfd_mach_mips_octeon3: return AFL_EXT_OCTEON3;
- case bfd_mach_mips_octeon2: return AFL_EXT_OCTEON2;
- case bfd_mach_mips_xlr: return AFL_EXT_XLR;
+ case bfd_mach_mips_sb1: return AFL_EXT_SB1;
+ case bfd_mach_mips_octeon: return AFL_EXT_OCTEON;
+ case bfd_mach_mips_octeonp: return AFL_EXT_OCTEONP;
+ case bfd_mach_mips_octeon3: return AFL_EXT_OCTEON3;
+ case bfd_mach_mips_octeon2: return AFL_EXT_OCTEON2;
+ case bfd_mach_mips_xlr: return AFL_EXT_XLR;
case bfd_mach_mips_interaptiv_mr2:
return AFL_EXT_INTERAPTIV_MR2;
- default: return 0;
+ default: return 0;
}
}
default:
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: Unknown architecture %s"),
+ (_("%pB: unknown architecture %s"),
abfd, bfd_printable_name (abfd));
}
bfd *input_bfd;
Elf32_External_RegInfo ext;
Elf32_RegInfo sub;
+ bfd_size_type sz;
if (p->type != bfd_indirect_link_order)
{
input_section = p->u.indirect.section;
input_bfd = input_section->owner;
+ sz = (input_section->size < sizeof (ext)
+ ? input_section->size : sizeof (ext));
+ memset (&ext, 0, sizeof (ext));
if (! bfd_get_section_contents (input_bfd, input_section,
- &ext, 0, sizeof ext))
+ &ext, 0, sz))
return FALSE;
bfd_mips_elf32_swap_reginfo_in (input_bfd, &ext, &sub);
reginfo.ri_cprmask[3] |= sub.ri_cprmask[3];
/* ri_gp_value is set by the function
- mips_elf32_section_processing when the section is
+ `_bfd_mips_elf_section_processing' when the section is
finally written out. */
/* Hack: reset the SEC_HAS_CONTENTS flag so that
{
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: illegal section name `%A'"), abfd, o);
+ (_("%pB: illegal section name `%pA'"), abfd, o);
bfd_set_error (bfd_error_nonrepresentable_section);
return FALSE;
}
!= ((old_flags & (EF_MIPS_PIC | EF_MIPS_CPIC)) != 0))
{
_bfd_error_handler
- (_("%B: warning: linking abicalls files with non-abicalls files"),
+ (_("%pB: warning: linking abicalls files with non-abicalls files"),
ibfd);
ok = TRUE;
}
if (mips_32bit_flags_p (old_flags) != mips_32bit_flags_p (new_flags))
{
_bfd_error_handler
- (_("%B: linking 32-bit code with 64-bit code"),
+ (_("%pB: linking 32-bit code with 64-bit code"),
ibfd);
ok = FALSE;
}
/* The ISAs aren't compatible. */
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: linking %s module with previous %s modules"),
+ (_("%pB: linking %s module with previous %s modules"),
ibfd,
bfd_printable_name (ibfd),
bfd_printable_name (obfd));
{
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: ABI mismatch: linking %s module with previous %s modules"),
+ (_("%pB: ABI mismatch: linking %s module with previous %s modules"),
ibfd,
elf_mips_abi_name (ibfd),
elf_mips_abi_name (obfd));
{
_bfd_error_handler
/* xgettext:c-format */
- (_("%B: ASE mismatch: linking %s module with previous %s modules"),
+ (_("%pB: ASE mismatch: linking %s module with previous %s modules"),
ibfd,
m16_mis ? "MIPS16" : "microMIPS",
m16_mis ? "microMIPS" : "MIPS16");
if ((new_flags & EF_MIPS_NAN2008) != (old_flags & EF_MIPS_NAN2008))
{
/* xgettext:c-format */
- _bfd_error_handler (_("%B: linking %s module with previous %s modules"),
+ _bfd_error_handler (_("%pB: linking %s module with previous %s modules"),
ibfd,
(new_flags & EF_MIPS_NAN2008
? "-mnan=2008" : "-mnan=legacy"),
if ((new_flags & EF_MIPS_FP64) != (old_flags & EF_MIPS_FP64))
{
/* xgettext:c-format */
- _bfd_error_handler (_("%B: linking %s module with previous %s modules"),
+ _bfd_error_handler (_("%pB: linking %s module with previous %s modules"),
ibfd,
(new_flags & EF_MIPS_FP64
? "-mfp64" : "-mfp32"),
{
/* xgettext:c-format */
_bfd_error_handler
- (_("%B: uses different e_flags (%#x) fields than previous modules "
+ (_("%pB: uses different e_flags (%#x) fields than previous modules "
"(%#x)"),
ibfd, new_flags, old_flags);
ok = FALSE;
if (!out_string && !in_string)
/* xgettext:c-format */
_bfd_error_handler
- (_("Warning: %B uses unknown floating point ABI %d "
- "(set by %B), %B uses unknown floating point ABI %d"),
+ (_("warning: %pB uses unknown floating point ABI %d "
+ "(set by %pB), %pB uses unknown floating point ABI %d"),
obfd, out_fp, abi_fp_bfd, ibfd, in_fp);
else if (!out_string)
_bfd_error_handler
/* xgettext:c-format */
- (_("Warning: %B uses unknown floating point ABI %d "
- "(set by %B), %B uses %s"),
+ (_("warning: %pB uses unknown floating point ABI %d "
+ "(set by %pB), %pB uses %s"),
obfd, out_fp, abi_fp_bfd, ibfd, in_string);
else if (!in_string)
_bfd_error_handler
/* xgettext:c-format */
- (_("Warning: %B uses %s (set by %B), "
- "%B uses unknown floating point ABI %d"),
+ (_("warning: %pB uses %s (set by %pB), "
+ "%pB uses unknown floating point ABI %d"),
obfd, out_string, abi_fp_bfd, ibfd, in_fp);
else
{
in_string = "-mhard-float";
_bfd_error_handler
/* xgettext:c-format */
- (_("Warning: %B uses %s (set by %B), %B uses %s"),
+ (_("warning: %pB uses %s (set by %pB), %pB uses %s"),
obfd, out_string, abi_fp_bfd, ibfd, in_string);
}
}
case Val_GNU_MIPS_ABI_MSA_128:
_bfd_error_handler
/* xgettext:c-format */
- (_("Warning: %B uses %s (set by %B), "
- "%B uses unknown MSA ABI %d"),
+ (_("warning: %pB uses %s (set by %pB), "
+ "%pB uses unknown MSA ABI %d"),
obfd, "-mmsa", abi_msa_bfd,
ibfd, in_attr[Tag_GNU_MIPS_ABI_MSA].i);
break;
case Val_GNU_MIPS_ABI_MSA_128:
_bfd_error_handler
/* xgettext:c-format */
- (_("Warning: %B uses unknown MSA ABI %d "
- "(set by %B), %B uses %s"),
+ (_("warning: %pB uses unknown MSA ABI %d "
+ "(set by %pB), %pB uses %s"),
obfd, out_attr[Tag_GNU_MIPS_ABI_MSA].i,
abi_msa_bfd, ibfd, "-mmsa");
break;
default:
_bfd_error_handler
/* xgettext:c-format */
- (_("Warning: %B uses unknown MSA ABI %d "
- "(set by %B), %B uses unknown MSA ABI %d"),
+ (_("warning: %pB uses unknown MSA ABI %d "
+ "(set by %pB), %pB uses unknown MSA ABI %d"),
obfd, out_attr[Tag_GNU_MIPS_ABI_MSA].i,
abi_msa_bfd, ibfd, in_attr[Tag_GNU_MIPS_ABI_MSA].i);
break;
if (! _bfd_generic_verify_endian_match (ibfd, info))
{
_bfd_error_handler
- (_("%B: endianness incompatible with that of the selected emulation"),
+ (_("%pB: endianness incompatible with that of the selected emulation"),
ibfd);
return FALSE;
}
if (strcmp (bfd_get_target (ibfd), bfd_get_target (obfd)) != 0)
{
_bfd_error_handler
- (_("%B: ABI is incompatible with that of the selected emulation"),
+ (_("%pB: ABI is incompatible with that of the selected emulation"),
ibfd);
return FALSE;
}
Elf_Internal_ABIFlags_v0 abiflags;
/* Set up the FP ABI attribute from the abiflags if it is not already
- set. */
+ set. */
if (in_attr[Tag_GNU_MIPS_ABI_FP].i == Val_GNU_MIPS_ABI_FP_ANY)
- in_attr[Tag_GNU_MIPS_ABI_FP].i = in_tdata->abiflags.fp_abi;
+ in_attr[Tag_GNU_MIPS_ABI_FP].i = in_tdata->abiflags.fp_abi;
infer_mips_abiflags (ibfd, &abiflags);
in_abiflags = in_tdata->abiflags;
/* It is not possible to infer the correct ISA revision
- for R3 or R5 so drop down to R2 for the checks. */
+ for R3 or R5 so drop down to R2 for the checks. */
if (in_abiflags.isa_rev == 3 || in_abiflags.isa_rev == 5)
in_abiflags.isa_rev = 2;
if (LEVEL_REV (in_abiflags.isa_level, in_abiflags.isa_rev)
< LEVEL_REV (abiflags.isa_level, abiflags.isa_rev))
_bfd_error_handler
- (_("%B: warning: Inconsistent ISA between e_flags and "
+ (_("%pB: warning: inconsistent ISA between e_flags and "
".MIPS.abiflags"), ibfd);
if (abiflags.fp_abi != Val_GNU_MIPS_ABI_FP_ANY
&& in_abiflags.fp_abi != abiflags.fp_abi)
_bfd_error_handler
- (_("%B: warning: Inconsistent FP ABI between .gnu.attributes and "
+ (_("%pB: warning: inconsistent FP ABI between .gnu.attributes and "
".MIPS.abiflags"), ibfd);
if ((in_abiflags.ases & abiflags.ases) != abiflags.ases)
_bfd_error_handler
- (_("%B: warning: Inconsistent ASEs between e_flags and "
+ (_("%pB: warning: inconsistent ASEs between e_flags and "
".MIPS.abiflags"), ibfd);
/* The isa_ext is allowed to be an extension of what can be inferred
from e_flags. */
if (!mips_mach_extends_p (bfd_mips_isa_ext_mach (abiflags.isa_ext),
bfd_mips_isa_ext_mach (in_abiflags.isa_ext)))
_bfd_error_handler
- (_("%B: warning: Inconsistent ISA extensions between e_flags and "
+ (_("%pB: warning: inconsistent ISA extensions between e_flags and "
".MIPS.abiflags"), ibfd);
if (in_abiflags.flags2 != 0)
_bfd_error_handler
- (_("%B: warning: Unexpected flag in the flags2 field of "
+ (_("%pB: warning: unexpected flag in the flags2 field of "
".MIPS.abiflags (0x%lx)"), ibfd,
in_abiflags.flags2);
}
const struct bfd_elf_special_section _bfd_mips_elf_special_sections[] =
{
- { STRING_COMMA_LEN (".lit4"), 0, SHT_PROGBITS, SHF_ALLOC + SHF_WRITE + SHF_MIPS_GPREL },
- { STRING_COMMA_LEN (".lit8"), 0, SHT_PROGBITS, SHF_ALLOC + SHF_WRITE + SHF_MIPS_GPREL },
+ { STRING_COMMA_LEN (".lit4"), 0, SHT_PROGBITS, SHF_ALLOC + SHF_WRITE + SHF_MIPS_GPREL },
+ { STRING_COMMA_LEN (".lit8"), 0, SHT_PROGBITS, SHF_ALLOC + SHF_WRITE + SHF_MIPS_GPREL },
{ STRING_COMMA_LEN (".mdebug"), 0, SHT_MIPS_DEBUG, 0 },
- { STRING_COMMA_LEN (".sbss"), -2, SHT_NOBITS, SHF_ALLOC + SHF_WRITE + SHF_MIPS_GPREL },
+ { STRING_COMMA_LEN (".sbss"), -2, SHT_NOBITS, SHF_ALLOC + SHF_WRITE + SHF_MIPS_GPREL },
{ STRING_COMMA_LEN (".sdata"), -2, SHT_PROGBITS, SHF_ALLOC + SHF_WRITE + SHF_MIPS_GPREL },
{ STRING_COMMA_LEN (".ucode"), 0, SHT_MIPS_UCODE, 0 },
- { NULL, 0, 0, 0, 0 }
+ { NULL, 0, 0, 0, 0 }
};
/* Merge non visibility st_other attributes. Ensure that the
projects / deliverable / binutils-gdb.git / blobdiff