/* HP PA-RISC SOM object file format: definitions internal to BFD.
- Copyright (C) 1990-1991 Free Software Foundation, Inc.
+ Copyright (C) 1990-2020 Free Software Foundation, Inc.
Contributed by the Center for Software Science at the
University of Utah (pa-gdb-bugs@cs.utah.edu).
-This file is part of BFD, the Binary File Descriptor library.
+ This file is part of BFD, the Binary File Descriptor library.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
+ MA 02110-1301, USA. */
#ifndef _LIBHPPA_H
#define _LIBHPPA_H
-#include "../bfd/sysdep.h"
+#define BYTES_IN_WORD 4
+#define PA_PAGESIZE 0x1000
-#ifdef HOST_HPPAHPUX
+/* The PA instruction set variants. */
+enum pa_arch {pa10 = 10, pa11 = 11, pa20 = 20, pa20w = 25};
-#include <sys/core.h>
-#include <sys/utsname.h>
+/* HP PA-RISC relocation types */
-#endif /* HOST_HPPAHPUX */
+enum hppa_reloc_field_selector_type
+ {
+ R_HPPA_FSEL = 0x0,
+ R_HPPA_LSSEL = 0x1,
+ R_HPPA_RSSEL = 0x2,
+ R_HPPA_LSEL = 0x3,
+ R_HPPA_RSEL = 0x4,
+ R_HPPA_LDSEL = 0x5,
+ R_HPPA_RDSEL = 0x6,
+ R_HPPA_LRSEL = 0x7,
+ R_HPPA_RRSEL = 0x8,
+ R_HPPA_NSEL = 0x9,
+ R_HPPA_NLSEL = 0xa,
+ R_HPPA_NLRSEL = 0xb,
+ R_HPPA_PSEL = 0xc,
+ R_HPPA_LPSEL = 0xd,
+ R_HPPA_RPSEL = 0xe,
+ R_HPPA_TSEL = 0xf,
+ R_HPPA_LTSEL = 0x10,
+ R_HPPA_RTSEL = 0x11,
+ R_HPPA_LTPSEL = 0x12,
+ R_HPPA_RTPSEL = 0x13
+ };
+
+/* /usr/include/reloc.h defines these to constants. We want to use
+ them in enums, so #undef them before we start using them. We might
+ be able to fix this another way by simply managing not to include
+ /usr/include/reloc.h, but currently GDB picks up these defines
+ somewhere. */
+#undef e_fsel
+#undef e_lssel
+#undef e_rssel
+#undef e_lsel
+#undef e_rsel
+#undef e_ldsel
+#undef e_rdsel
+#undef e_lrsel
+#undef e_rrsel
+#undef e_nsel
+#undef e_nlsel
+#undef e_nlrsel
+#undef e_psel
+#undef e_lpsel
+#undef e_rpsel
+#undef e_tsel
+#undef e_ltsel
+#undef e_rtsel
+#undef e_one
+#undef e_two
+#undef e_pcrel
+#undef e_con
+#undef e_plabel
+#undef e_abs
-#ifdef HOST_HPPABSD
+/* for compatibility */
+enum hppa_reloc_field_selector_type_alt
+ {
+ e_fsel = R_HPPA_FSEL,
+ e_lssel = R_HPPA_LSSEL,
+ e_rssel = R_HPPA_RSSEL,
+ e_lsel = R_HPPA_LSEL,
+ e_rsel = R_HPPA_RSEL,
+ e_ldsel = R_HPPA_LDSEL,
+ e_rdsel = R_HPPA_RDSEL,
+ e_lrsel = R_HPPA_LRSEL,
+ e_rrsel = R_HPPA_RRSEL,
+ e_nsel = R_HPPA_NSEL,
+ e_nlsel = R_HPPA_NLSEL,
+ e_nlrsel = R_HPPA_NLRSEL,
+ e_psel = R_HPPA_PSEL,
+ e_lpsel = R_HPPA_LPSEL,
+ e_rpsel = R_HPPA_RPSEL,
+ e_tsel = R_HPPA_TSEL,
+ e_ltsel = R_HPPA_LTSEL,
+ e_rtsel = R_HPPA_RTSEL,
+ e_ltpsel = R_HPPA_LTPSEL,
+ e_rtpsel = R_HPPA_RTPSEL
+ };
-/* BSD uses a completely different scheme for object file identification.
- so for now, define _PA_RISC_ID to accept any random value for a model
- number. */
+enum hppa_reloc_expr_type
+ {
+ R_HPPA_E_ONE = 0,
+ R_HPPA_E_TWO = 1,
+ R_HPPA_E_PCREL = 2,
+ R_HPPA_E_CON = 3,
+ R_HPPA_E_PLABEL = 7,
+ R_HPPA_E_ABS = 18
+ };
-#include <a.out.h>
+/* for compatibility */
+enum hppa_reloc_expr_type_alt
+ {
+ e_one = R_HPPA_E_ONE,
+ e_two = R_HPPA_E_TWO,
+ e_pcrel = R_HPPA_E_PCREL,
+ e_con = R_HPPA_E_CON,
+ e_plabel = R_HPPA_E_PLABEL,
+ e_abs = R_HPPA_E_ABS
+ };
-/* Not a very swift place to put it, but that's where the BSD port
- puts them. */
-#include "/hpux/usr/include/sys/core.h"
-#ifndef _PA_RISC_ID
-#define _PA_RISC_ID(__m_num) 1
-#endif
-#endif /* HOST_HPPABSD */
+/* Relocations for function calls must be accompanied by parameter
+ relocation bits. These bits describe exactly where the caller has
+ placed the function's arguments and where it expects to find a return
+ value.
-/* Defining MAXCOMLEN avoids bringing in several (7 or 8) otherwise
- useless include files which tend to clutter up the namespace. */
+ Both ELF and SOM encode this information within the addend field
+ of the call relocation. (Note this could break very badly if one
+ was to make a call like bl foo + 0x12345678).
-#define MAXCOMLEN 16
+ The high order 10 bits contain parameter relocation information,
+ the low order 22 bits contain the constant offset. */
-#define BYTES_IN_WORD 4
+#define HPPA_R_ARG_RELOC(a) \
+ (((a) >> 22) & 0x3ff)
+#define HPPA_R_CONSTANT(a) \
+ ((((bfd_signed_vma) (a) & 0x3fffff) ^ 0x200000) - 0x200000)
+#define HPPA_R_ADDEND(r, c) \
+ (((r) << 22) + ((c) & 0x3fffff))
-struct header;
-struct som_exec_auxhdr;
-struct subspace_dictionary;
-#define FILE_HDR_SIZE sizeof(struct header)
-#define AUX_HDR_SIZE sizeof(struct som_exec_auxhdr)
+/* Some functions to manipulate PA instructions. */
-typedef struct hppa_symbol
+/* The *sign_extend functions are used to assemble various bitfields
+ taken from an instruction and return the resulting immediate
+ value. */
+
+static inline unsigned ATTRIBUTE_UNUSED
+sign_extend (unsigned x, unsigned len)
{
- asymbol symbol;
- short desc;
- char other;
- unsigned char type;
-} hppa_symbol_type;
+ unsigned signbit = (1 << (len - 1));
+ unsigned mask = (signbit << 1) - 1;
+ return ((x & mask) ^ signbit) - signbit;
+}
-struct hppadata
+static inline unsigned ATTRIBUTE_UNUSED
+low_sign_extend (unsigned x, unsigned len)
{
- struct header *file_hdr;
- struct som_exec_auxhdr *aux_hdr;
- hppa_symbol_type *symbols;
+ return (x >> 1) - ((x & 1) << (len - 1));
+}
- /* We remember these offsets so that after check_file_format, we have
- no dependencies on the particular format of the exec_hdr. */
- file_ptr sym_filepos;
- file_ptr str_filepos;
+/* The re_assemble_* functions prepare an immediate value for
+ insertion into an opcode. pa-risc uses all sorts of weird bitfields
+ in the instruction to hold the value. */
- unsigned stringtab_size;
+static inline unsigned ATTRIBUTE_UNUSED
+sign_unext (unsigned x, unsigned len)
+{
+ unsigned len_ones;
- /* Size of a symbol table entry in external form */
- unsigned hp_symbol_entry_size;
-};
+ len_ones = (1 << len) - 1;
-struct hppa_data_struct {
- struct hppadata a;
-};
+ return x & len_ones;
+}
-#define padata(bfd) ((bfd)->tdata.hppa_data->a)
-#define obj_file_hdr(bfd) (padata(bfd).file_hdr)
-#define obj_aux_hdr(bfd) (padata(bfd).aux_hdr)
-#define obj_pa_symbols(bfd) (padata(bfd).symbols)
-#define obj_sym_filepos(bfd) (padata(bfd).sym_filepos)
-#define obj_str_filepos(bfd) (padata(bfd).str_filepos)
-#define obj_stringtab_size(bfd) (padata(bfd).stringtab_size)
+static inline unsigned ATTRIBUTE_UNUSED
+low_sign_unext (unsigned x, unsigned len)
+{
+ unsigned temp;
+ unsigned sign;
-/* We take the address of the first element of an asymbol to ensure that the
- macro is only ever applied to an asymbol */
-#define hppa_symbol(asymbol) ((hppa_symbol_type *)(&(asymbol)->the_bfd))
+ sign = (x >> (len-1)) & 1;
+ temp = sign_unext (x, len-1);
-/* These are stored in the bfd's tdata */
+ return (temp << 1) | sign;
+}
-struct hppa_core_struct
+static inline unsigned ATTRIBUTE_UNUSED
+re_assemble_3 (unsigned as3)
{
- int sig;
- char cmd[MAXCOMLEN + 1];
- asection *data_section;
- asection *stack_section;
- asection *reg_section;
-};
+ return (( (as3 & 4) << (13-2))
+ | ((as3 & 3) << (13+1)));
+}
-#define core_hdr(bfd) ((bfd)->tdata.hppa_core_data)
-#define core_signal(bfd) (core_hdr(bfd)->sig)
-#define core_command(bfd) (core_hdr(bfd)->cmd)
-#define core_datasec(bfd) (core_hdr(bfd)->data_section)
-#define core_stacksec(bfd) (core_hdr(bfd)->stack_section)
-#define core_regsec(bfd) (core_hdr(bfd)->reg_section)
+static inline unsigned ATTRIBUTE_UNUSED
+re_assemble_12 (unsigned as12)
+{
+ return (( (as12 & 0x800) >> 11)
+ | ((as12 & 0x400) >> (10 - 2))
+ | ((as12 & 0x3ff) << (1 + 2)));
+}
-/* HP PA-RISC relocation types */
+static inline unsigned ATTRIBUTE_UNUSED
+re_assemble_14 (unsigned as14)
+{
+ return (( (as14 & 0x1fff) << 1)
+ | ((as14 & 0x2000) >> 13));
+}
-enum hppa_reloc_field_selector_type
+static inline unsigned ATTRIBUTE_UNUSED
+re_assemble_16 (unsigned as16)
{
- R_HPPA_FSEL = 0x0,
- R_HPPA_LSSEL = 0x1,
- R_HPPA_RSSEL = 0x2,
- R_HPPA_LSEL = 0x3,
- R_HPPA_RSEL = 0x4,
- R_HPPA_LDSEL = 0x5,
- R_HPPA_RDSEL = 0x6,
- R_HPPA_LRSEL = 0x7,
- R_HPPA_RRSEL = 0x8,
- R_HPPA_PSEL = 0x9, /* P' : procedure address for shlib's */
- R_HPPA_LPSEL = 0xa, /* LP' : L' for procedure addresses */
- R_HPPA_RPSEL = 0xb, /* RP' : R' for procedure addresses */
-
- R_HPPA_TSEL = 0xc, /* T' : DLT-relative offset for shlib's */
- R_HPPA_LTSEL = 0xd, /* LT' : L' for DLT-relative offsets */
- R_HPPA_RTSEL = 0xe /* RT' : R' for DLT-relative offsets */
+ unsigned s, t;
-};
+ /* Unusual 16-bit encoding, for wide mode only. */
+ t = (as16 << 1) & 0xffff;
+ s = (as16 & 0x8000);
+ return (t ^ s ^ (s >> 1)) | (s >> 15);
+}
-/* Need to undefine things defined in <machine/som.h> */
+static inline unsigned ATTRIBUTE_UNUSED
+re_assemble_17 (unsigned as17)
+{
+ return (( (as17 & 0x10000) >> 16)
+ | ((as17 & 0x0f800) << (16 - 11))
+ | ((as17 & 0x00400) >> (10 - 2))
+ | ((as17 & 0x003ff) << (1 + 2)));
+}
+
+static inline unsigned ATTRIBUTE_UNUSED
+re_assemble_21 (unsigned as21)
+{
+ return (( (as21 & 0x100000) >> 20)
+ | ((as21 & 0x0ffe00) >> 8)
+ | ((as21 & 0x000180) << 7)
+ | ((as21 & 0x00007c) << 14)
+ | ((as21 & 0x000003) << 12));
+}
+
+static inline unsigned ATTRIBUTE_UNUSED
+re_assemble_22 (unsigned as22)
+{
+ return (( (as22 & 0x200000) >> 21)
+ | ((as22 & 0x1f0000) << (21 - 16))
+ | ((as22 & 0x00f800) << (16 - 11))
+ | ((as22 & 0x000400) >> (10 - 2))
+ | ((as22 & 0x0003ff) << (1 + 2)));
+}
-#undef e_fsel
-#undef e_lssel
-#undef e_rssel
-#undef e_lsel
-#undef e_rsel
-#undef e_ldsel
-#undef e_rdsel
-#undef e_lrsel
-#undef e_rrsel
-#undef e_psel
-#undef e_lpsel
-#undef e_rpsel
-#undef e_tsel
-#undef e_ltsel
-#undef e_rtsel
-#undef e_one
-#undef e_two
-#undef e_pcrel
-#undef e_con
-#undef e_plabel
-#undef e_abs
-/* for compatibility */
-enum hppa_reloc_field_selector_type_alt
-{
- e_fsel = R_HPPA_FSEL,
- e_lssel = R_HPPA_LSSEL,
- e_rssel = R_HPPA_RSSEL,
- e_lsel = R_HPPA_LSEL,
- e_rsel = R_HPPA_RSEL,
- e_ldsel = R_HPPA_LDSEL,
- e_rdsel = R_HPPA_RDSEL,
- e_lrsel = R_HPPA_LRSEL,
- e_rrsel = R_HPPA_RRSEL,
- e_psel = R_HPPA_PSEL, /* P' : procedure address for shlib's */
- e_lpsel = R_HPPA_LPSEL, /* LP' : L' for procedure addresses */
- e_rpsel = R_HPPA_RPSEL, /* RP' : R' for procedure addresses */
-
- e_tsel = R_HPPA_TSEL, /* T' : DLT-relative offset for shlib's */
- e_ltsel = R_HPPA_LTSEL, /* LT' : L' for DLT-relative offsets */
- e_rtsel = R_HPPA_RTSEL /* RT' : R' for DLT-relative offsets */
-};
+/* Handle field selectors for PA instructions.
+ The L and R (and LS, RS etc.) selectors are used in pairs to form a
+ full 32 bit address. eg.
-enum hppa_reloc_expr_type
+ LDIL L'start,%r1 ; put left part into r1
+ LDW R'start(%r1),%r2 ; add r1 and right part to form address
+
+ This function returns sign extended values in all cases.
+*/
+
+static inline bfd_signed_vma ATTRIBUTE_UNUSED
+hppa_field_adjust (bfd_vma sym_val,
+ bfd_signed_vma addend,
+ enum hppa_reloc_field_selector_type_alt r_field)
+{
+ bfd_signed_vma value;
+
+ value = sym_val + addend;
+ switch (r_field)
+ {
+ case e_fsel:
+ /* F: No change. */
+ break;
+
+ case e_nsel:
+ /* N: null selector. I don't really understand what this is all
+ about, but HP's documentation says "this indicates that zero
+ bits are to be used for the displacement on the instruction.
+ This fixup is used to identify three-instruction sequences to
+ access data (for importing shared library data)." */
+ value = 0;
+ break;
+
+ case e_lsel:
+ case e_nlsel:
+ /* L: Select top 21 bits. */
+ value = value >> 11;
+ break;
+
+ case e_rsel:
+ /* R: Select bottom 11 bits. */
+ value = value & 0x7ff;
+ break;
+
+ case e_lssel:
+ /* LS: Round to nearest multiple of 2048 then select top 21 bits. */
+ value = value + 0x400;
+ value = value >> 11;
+ break;
+
+ case e_rssel:
+ /* RS: Select bottom 11 bits for LS.
+ We need to return a value such that 2048 * LS'x + RS'x == x.
+ ie. RS'x = x - ((x + 0x400) & -0x800)
+ this is just a sign extension from bit 21. */
+ value = ((value & 0x7ff) ^ 0x400) - 0x400;
+ break;
+
+ case e_ldsel:
+ /* LD: Round to next multiple of 2048 then select top 21 bits.
+ Yes, if we are already on a multiple of 2048, we go up to the
+ next one. RD in this case will be -2048. */
+ value = value + 0x800;
+ value = value >> 11;
+ break;
+
+ case e_rdsel:
+ /* RD: Set bits 0-20 to one. */
+ value = value | -0x800;
+ break;
+
+ case e_lrsel:
+ case e_nlrsel:
+ /* LR: L with rounding of the addend to nearest 8k. */
+ value = sym_val + ((addend + 0x1000) & -0x2000);
+ value = value >> 11;
+ break;
+
+ case e_rrsel:
+ /* RR: R with rounding of the addend to nearest 8k.
+ We need to return a value such that 2048 * LR'x + RR'x == x
+ ie. RR'x = s+a - (s + (((a + 0x1000) & -0x2000) & -0x800))
+ . = s+a - ((s & -0x800) + ((a + 0x1000) & -0x2000))
+ . = (s & 0x7ff) + a - ((a + 0x1000) & -0x2000) */
+ value = (sym_val & 0x7ff) + (((addend & 0x1fff) ^ 0x1000) - 0x1000);
+ break;
+
+ default:
+ abort ();
+ }
+ return value;
+}
+
+/* PA-RISC OPCODES */
+#define get_opcode(insn) (((insn) >> 26) & 0x3f)
+
+enum hppa_opcode_type
{
- R_HPPA_E_ONE = 0,
- R_HPPA_E_TWO = 1,
- R_HPPA_E_PCREL = 2,
- R_HPPA_E_CON = 3,
- R_HPPA_E_PLABEL = 7,
- R_HPPA_E_ABS = 18
+ /* None of the opcodes in the first group generate relocs, so we
+ aren't too concerned about them. */
+ OP_SYSOP = 0x00,
+ OP_MEMMNG = 0x01,
+ OP_ALU = 0x02,
+ OP_NDXMEM = 0x03,
+ OP_SPOP = 0x04,
+ OP_DIAG = 0x05,
+ OP_FMPYADD = 0x06,
+ OP_UNDEF07 = 0x07,
+ OP_COPRW = 0x09,
+ OP_COPRDW = 0x0b,
+ OP_COPR = 0x0c,
+ OP_FLOAT = 0x0e,
+ OP_PRDSPEC = 0x0f,
+ OP_UNDEF15 = 0x15,
+ OP_UNDEF1d = 0x1d,
+ OP_FMPYSUB = 0x26,
+ OP_FPFUSED = 0x2e,
+ OP_SHEXDP0 = 0x34,
+ OP_SHEXDP1 = 0x35,
+ OP_SHEXDP2 = 0x36,
+ OP_UNDEF37 = 0x37,
+ OP_SHEXDP3 = 0x3c,
+ OP_SHEXDP4 = 0x3d,
+ OP_MULTMED = 0x3e,
+ OP_UNDEF3f = 0x3f,
+
+ OP_LDIL = 0x08,
+ OP_ADDIL = 0x0a,
+
+ OP_LDO = 0x0d,
+ OP_LDB = 0x10,
+ OP_LDH = 0x11,
+ OP_LDW = 0x12,
+ OP_LDWM = 0x13,
+ OP_STB = 0x18,
+ OP_STH = 0x19,
+ OP_STW = 0x1a,
+ OP_STWM = 0x1b,
+
+ OP_LDD = 0x14,
+ OP_STD = 0x1c,
+
+ OP_FLDW = 0x16,
+ OP_LDWL = 0x17,
+ OP_FSTW = 0x1e,
+ OP_STWL = 0x1f,
+
+ OP_COMBT = 0x20,
+ OP_COMIBT = 0x21,
+ OP_COMBF = 0x22,
+ OP_COMIBF = 0x23,
+ OP_CMPBDT = 0x27,
+ OP_ADDBT = 0x28,
+ OP_ADDIBT = 0x29,
+ OP_ADDBF = 0x2a,
+ OP_ADDIBF = 0x2b,
+ OP_CMPBDF = 0x2f,
+ OP_BVB = 0x30,
+ OP_BB = 0x31,
+ OP_MOVB = 0x32,
+ OP_MOVIB = 0x33,
+ OP_CMPIBD = 0x3b,
+
+ OP_COMICLR = 0x24,
+ OP_SUBI = 0x25,
+ OP_ADDIT = 0x2c,
+ OP_ADDI = 0x2d,
+
+ OP_BE = 0x38,
+ OP_BLE = 0x39,
+ OP_BL = 0x3a
};
-/* for compatibility */
-enum hppa_reloc_expr_type_alt
+
+/* Given a machine instruction, return its format. */
+
+static inline unsigned ATTRIBUTE_UNUSED
+bfd_hppa_insn2fmt (bfd *abfd, unsigned insn)
{
- e_one = R_HPPA_E_ONE,
- e_two = R_HPPA_E_TWO,
- e_pcrel = R_HPPA_E_PCREL,
- e_con = R_HPPA_E_CON,
- e_plabel = R_HPPA_E_PLABEL,
- e_abs = R_HPPA_E_ABS
-};
+ enum hppa_opcode_type op = (enum hppa_opcode_type) get_opcode (insn);
+
+ switch (op)
+ {
+ case OP_COMICLR:
+ case OP_SUBI:
+ case OP_ADDIT:
+ case OP_ADDI:
+ return 11;
+
+ case OP_COMBT:
+ case OP_COMIBT:
+ case OP_COMBF:
+ case OP_COMIBF:
+ case OP_CMPBDT:
+ case OP_ADDBT:
+ case OP_ADDIBT:
+ case OP_ADDBF:
+ case OP_ADDIBF:
+ case OP_CMPBDF:
+ case OP_BVB:
+ case OP_BB:
+ case OP_MOVB:
+ case OP_MOVIB:
+ case OP_CMPIBD:
+ return 12;
+
+ case OP_LDO:
+ case OP_LDB:
+ case OP_LDH:
+ case OP_LDW:
+ case OP_LDWM:
+ case OP_STB:
+ case OP_STH:
+ case OP_STW:
+ case OP_STWM:
+ if (abfd->arch_info->mach >= 25)
+ return 16; /* Wide mode, format 16. */
+ return 14;
+
+ case OP_FLDW:
+ case OP_LDWL:
+ case OP_FSTW:
+ case OP_STWL:
+ /* This is a hack. Unfortunately, format 11 is already taken
+ and we're using integers rather than an enum, so it's hard
+ to describe the 11a format. */
+ if (abfd->arch_info->mach >= 25)
+ return -16; /* Wide mode, format 16a. */
+ return -11;
+
+ case OP_LDD:
+ case OP_STD:
+ if (abfd->arch_info->mach >= 25)
+ return -10; /* Wide mode, format 10a. */
+ return 10;
+
+ case OP_BL:
+ if ((insn & 0x8000) != 0)
+ return 22;
+ /* fall thru */
+ case OP_BE:
+ case OP_BLE:
+ return 17;
+
+ case OP_LDIL:
+ case OP_ADDIL:
+ return 21;
+
+ default:
+ break;
+ }
+ return 32;
+}
+
+
+/* Insert VALUE into INSN using R_FORMAT to determine exactly what
+ bits to change. */
+
+static inline unsigned ATTRIBUTE_UNUSED
+hppa_rebuild_insn (unsigned insn, unsigned value, int r_format)
+{
+ switch (r_format)
+ {
+ case 11:
+ return (insn & ~ 0x7ff) | low_sign_unext (value, 11);
+
+ case 12:
+ return (insn & ~ 0x1ffd) | re_assemble_12 (value);
+
+
+ case 10:
+ return (insn & ~ 0x3ff1) | re_assemble_14 (value & -8);
+
+ case -11:
+ return (insn & ~ 0x3ff9) | re_assemble_14 (value & -4);
+
+ case 14:
+ return (insn & ~ 0x3fff) | re_assemble_14 (value);
+
+
+ case -10:
+ return (insn & ~ 0xfff1) | re_assemble_16 (value & -8);
+
+ case -16:
+ return (insn & ~ 0xfff9) | re_assemble_16 (value & -4);
+
+ case 16:
+ return (insn & ~ 0xffff) | re_assemble_16 (value);
+
+
+ case 17:
+ return (insn & ~ 0x1f1ffd) | re_assemble_17 (value);
+
+ case 21:
+ return (insn & ~ 0x1fffff) | re_assemble_21 (value);
+
+ case 22:
+ return (insn & ~ 0x3ff1ffd) | re_assemble_22 (value);
+
+ case 32:
+ return value;
+
+ default:
+ abort ();
+ }
+ return insn;
+}
#endif /* _LIBHPPA_H */