/* BFD support for handling relocation entries.
- Copyright (C) 1990-2018 Free Software Foundation, Inc.
+ Copyright (C) 1990-2020 Free Software Foundation, Inc.
Written by Cygnus Support.
This file is part of BFD, the Binary File Descriptor library.
. }
. bfd_reloc_status_type;
.
+.typedef const struct reloc_howto_struct reloc_howto_type;
.
.typedef struct reloc_cache_entry
.{
information that libbfd needs to know to tie up a back end's data.
CODE_FRAGMENT
-.struct bfd_symbol; {* Forward declaration. *}
-.
.struct reloc_howto_struct
.{
-. {* The type field has mainly a documentary use - the back end can
-. do what it wants with it, though normally the back end's
-. external idea of what a reloc number is stored
-. in this field. For example, a PC relative word relocation
-. in a coff environment has the type 023 - because that's
-. what the outside world calls a R_PCRWORD reloc. *}
+. {* The type field has mainly a documentary use - the back end can
+. do what it wants with it, though normally the back end's idea of
+. an external reloc number is stored in this field. *}
. unsigned int type;
.
-. {* The value the final relocation is shifted right by. This drops
-. unwanted data from the relocation. *}
-. unsigned int rightshift;
-.
-. {* The size of the item to be relocated. This is *not* a
-. power-of-two measure. To get the number of bytes operated
-. on by a type of relocation, use bfd_get_reloc_size. *}
-. int size;
+. {* The encoded size of the item to be relocated. This is *not* a
+. power-of-two measure. Use bfd_get_reloc_size to find the size
+. of the item in bytes. *}
+. unsigned int size:3;
.
-. {* The number of bits in the item to be relocated. This is used
-. when doing overflow checking. *}
-. unsigned int bitsize;
+. {* The number of bits in the field to be relocated. This is used
+. when doing overflow checking. *}
+. unsigned int bitsize:7;
.
-. {* The relocation is relative to the field being relocated. *}
-. bfd_boolean pc_relative;
+. {* The value the final relocation is shifted right by. This drops
+. unwanted data from the relocation. *}
+. unsigned int rightshift:6;
.
-. {* The bit position of the reloc value in the destination.
-. The relocated value is left shifted by this amount. *}
-. unsigned int bitpos;
+. {* The bit position of the reloc value in the destination.
+. The relocated value is left shifted by this amount. *}
+. unsigned int bitpos:6;
.
. {* What type of overflow error should be checked for when
. relocating. *}
-. enum complain_overflow complain_on_overflow;
+. ENUM_BITFIELD (complain_overflow) complain_on_overflow:2;
.
-. {* If this field is non null, then the supplied function is
-. called rather than the normal function. This allows really
-. strange relocation methods to be accommodated. *}
-. bfd_reloc_status_type (*special_function)
-. (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
-. bfd *, char **);
+. {* The relocation value should be negated before applying. *}
+. unsigned int negate:1;
.
-. {* The textual name of the relocation type. *}
-. char *name;
+. {* The relocation is relative to the item being relocated. *}
+. unsigned int pc_relative:1;
.
. {* Some formats record a relocation addend in the section contents
. rather than with the relocation. For ELF formats this is the
. USE_REL targets set this field to TRUE. Why this is so is peculiar
. to each particular target. For relocs that aren't used in partial
. links (e.g. GOT stuff) it doesn't matter what this is set to. *}
-. bfd_boolean partial_inplace;
+. unsigned int partial_inplace:1;
+.
+. {* When some formats create PC relative instructions, they leave
+. the value of the pc of the place being relocated in the offset
+. slot of the instruction, so that a PC relative relocation can
+. be made just by adding in an ordinary offset (e.g., sun3 a.out).
+. Some formats leave the displacement part of an instruction
+. empty (e.g., ELF); this flag signals the fact. *}
+. unsigned int pcrel_offset:1;
.
. {* src_mask selects the part of the instruction (or data) to be used
. in the relocation sum. If the target relocations don't have an
. addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
. dst_mask to extract the addend from the section contents. If
. relocations do have an addend in the reloc, eg. ELF USE_RELA, this
-. field should be zero. Non-zero values for ELF USE_RELA targets are
-. bogus as in those cases the value in the dst_mask part of the
-. section contents should be treated as garbage. *}
+. field should normally be zero. Non-zero values for ELF USE_RELA
+. targets should be viewed with suspicion as normally the value in
+. the dst_mask part of the section contents should be ignored. *}
. bfd_vma src_mask;
.
. {* dst_mask selects which parts of the instruction (or data) are
. replaced with a relocated value. *}
. bfd_vma dst_mask;
.
-. {* When some formats create PC relative instructions, they leave
-. the value of the pc of the place being relocated in the offset
-. slot of the instruction, so that a PC relative relocation can
-. be made just by adding in an ordinary offset (e.g., sun3 a.out).
-. Some formats leave the displacement part of an instruction
-. empty (e.g., ELF); this flag signals the fact. *}
-. bfd_boolean pcrel_offset;
+. {* If this field is non null, then the supplied function is
+. called rather than the normal function. This allows really
+. strange relocation methods to be accommodated. *}
+. bfd_reloc_status_type (*special_function)
+. (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
+. bfd *, char **);
+.
+. {* The textual name of the relocation type. *}
+. const char *name;
.};
.
*/
The HOWTO macro fills in a reloc_howto_type (a typedef for
const struct reloc_howto_struct).
-.#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
-. { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
+.#define HOWTO(type, right, size, bits, pcrel, left, ovf, func, name, \
+. inplace, src_mask, dst_mask, pcrel_off) \
+. { (unsigned) type, size < 0 ? -size : size, bits, right, left, ovf, \
+. size < 0, pcrel, inplace, pcrel_off, src_mask, dst_mask, func, name }
DESCRIPTION
This is used to fill in an empty howto entry in an array.
switch (howto->size)
{
case 0: return 1;
- case 1:
- case -1: return 2;
- case 2:
- case -2: return 4;
+ case 1: return 2;
+ case 2: return 4;
case 3: return 0;
case 4: return 8;
case 5: return 3;
- case 8: return 16;
default: abort ();
}
}
return bfd_get_8 (abfd, data);
case 1:
- case -1:
return bfd_get_16 (abfd, data);
case 2:
- case -2:
return bfd_get_32 (abfd, data);
case 3:
break;
case 1:
- case -1:
bfd_put_16 (abfd, val, data);
break;
case 2:
- case -2:
bfd_put_32 (abfd, val, data);
break;
{
bfd_vma val = read_reloc (abfd, data, howto);
- if (howto->size < 0)
+ if (howto->negate)
relocation = -relocation;
val = ((val & ~howto->dst_mask)
return bfd_reloc_undefined;
/* Is the address of the relocation really within the section? */
- octets = reloc_entry->address * bfd_octets_per_byte (abfd);
+ octets = reloc_entry->address * bfd_octets_per_byte (abfd, input_section);
if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
return bfd_reloc_outofrange;
else
output_base = reloc_target_output_section->vma;
- relocation += output_base + symbol->section->output_offset;
+ output_base += symbol->section->output_offset;
+
+ /* If symbol addresses are in octets, convert to bytes. */
+ if (bfd_get_flavour (abfd) == bfd_target_elf_flavour
+ && (symbol->section->flags & SEC_ELF_OCTETS))
+ output_base *= bfd_octets_per_byte (abfd, input_section);
+
+ relocation += output_base;
/* Add in supplied addend. */
relocation += reloc_entry->addend;
it will have been checked in `bfd_perform_relocation already'. */
/* Is the address of the relocation really within the section? */
- octets = reloc_entry->address * bfd_octets_per_byte (abfd);
+ octets = reloc_entry->address * bfd_octets_per_byte (abfd, input_section);
if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
return bfd_reloc_outofrange;
else
output_base = reloc_target_output_section->vma;
- relocation += output_base + symbol->section->output_offset;
+ output_base += symbol->section->output_offset;
+
+ /* If symbol addresses are in octets, convert to bytes. */
+ if (bfd_get_flavour (abfd) == bfd_target_elf_flavour
+ && (symbol->section->flags & SEC_ELF_OCTETS))
+ output_base *= bfd_octets_per_byte (abfd, input_section);
+
+ relocation += output_base;
/* Add in supplied addend. */
relocation += reloc_entry->addend;
bfd_vma addend)
{
bfd_vma relocation;
- bfd_size_type octets = address * bfd_octets_per_byte (input_bfd);
+ bfd_size_type octets = (address
+ * bfd_octets_per_byte (input_bfd, input_section));
/* Sanity check the address. */
if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, octets))
}
return _bfd_relocate_contents (howto, input_bfd, relocation,
- contents
- + address * bfd_octets_per_byte (input_bfd));
+ contents + octets);
}
/* Relocate a given location using a given value and howto. */
unsigned int rightshift = howto->rightshift;
unsigned int bitpos = howto->bitpos;
- /* If the size is negative, negate RELOCATION. This isn't very
- general. */
- if (howto->size < 0)
+ if (howto->negate)
relocation = -relocation;
/* Get the value we are going to relocate. */
relocations against discarded symbols, to make ignorable debug or unwind
information more obvious. */
-void
+bfd_reloc_status_type
_bfd_clear_contents (reloc_howto_type *howto,
bfd *input_bfd,
asection *input_section,
- bfd_byte *location)
+ bfd_byte *buf,
+ bfd_vma off)
{
bfd_vma x;
+ bfd_byte *location;
+
+ if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, off))
+ return bfd_reloc_outofrange;
/* Get the value we are going to relocate. */
+ location = buf + off;
x = read_reloc (input_bfd, location, howto);
/* Zero out the unwanted bits of X. */
/* For a range list, use 1 instead of 0 as placeholder. 0
would terminate the list, hiding any later entries. */
- if (strcmp (bfd_get_section_name (input_bfd, input_section),
- ".debug_ranges") == 0
+ if (strcmp (bfd_section_name (input_section), ".debug_ranges") == 0
&& (howto->dst_mask & 1) != 0)
x |= 1;
/* Put the relocated value back in the object file. */
write_reloc (input_bfd, x, location, howto);
+ return bfd_reloc_ok;
}
/*
BFD_RELOC_PPC64_ADDR16_HIGH
ENUMX
BFD_RELOC_PPC64_ADDR16_HIGHA
+ENUMX
+ BFD_RELOC_PPC64_REL16_HIGH
+ENUMX
+ BFD_RELOC_PPC64_REL16_HIGHA
+ENUMX
+ BFD_RELOC_PPC64_REL16_HIGHER
+ENUMX
+ BFD_RELOC_PPC64_REL16_HIGHERA
+ENUMX
+ BFD_RELOC_PPC64_REL16_HIGHEST
+ENUMX
+ BFD_RELOC_PPC64_REL16_HIGHESTA
ENUMX
BFD_RELOC_PPC64_ADDR64_LOCAL
ENUMX
BFD_RELOC_PPC64_ENTRY
ENUMX
BFD_RELOC_PPC64_REL24_NOTOC
+ENUMX
+ BFD_RELOC_PPC64_D34
+ENUMX
+ BFD_RELOC_PPC64_D34_LO
+ENUMX
+ BFD_RELOC_PPC64_D34_HI30
+ENUMX
+ BFD_RELOC_PPC64_D34_HA30
+ENUMX
+ BFD_RELOC_PPC64_PCREL34
+ENUMX
+ BFD_RELOC_PPC64_GOT_PCREL34
+ENUMX
+ BFD_RELOC_PPC64_PLT_PCREL34
+ENUMX
+ BFD_RELOC_PPC64_ADDR16_HIGHER34
+ENUMX
+ BFD_RELOC_PPC64_ADDR16_HIGHERA34
+ENUMX
+ BFD_RELOC_PPC64_ADDR16_HIGHEST34
+ENUMX
+ BFD_RELOC_PPC64_ADDR16_HIGHESTA34
+ENUMX
+ BFD_RELOC_PPC64_REL16_HIGHER34
+ENUMX
+ BFD_RELOC_PPC64_REL16_HIGHERA34
+ENUMX
+ BFD_RELOC_PPC64_REL16_HIGHEST34
+ENUMX
+ BFD_RELOC_PPC64_REL16_HIGHESTA34
+ENUMX
+ BFD_RELOC_PPC64_D28
+ENUMX
+ BFD_RELOC_PPC64_PCREL28
ENUMDOC
Power(rs6000) and PowerPC relocations.
BFD_RELOC_PPC64_TPREL16_DS
ENUMX
BFD_RELOC_PPC64_TPREL16_LO_DS
+ENUMX
+ BFD_RELOC_PPC64_TPREL16_HIGH
+ENUMX
+ BFD_RELOC_PPC64_TPREL16_HIGHA
ENUMX
BFD_RELOC_PPC64_TPREL16_HIGHER
ENUMX
BFD_RELOC_PPC64_DTPREL16_DS
ENUMX
BFD_RELOC_PPC64_DTPREL16_LO_DS
+ENUMX
+ BFD_RELOC_PPC64_DTPREL16_HIGH
+ENUMX
+ BFD_RELOC_PPC64_DTPREL16_HIGHA
ENUMX
BFD_RELOC_PPC64_DTPREL16_HIGHER
ENUMX
ENUMX
BFD_RELOC_PPC64_DTPREL16_HIGHESTA
ENUMX
- BFD_RELOC_PPC64_TPREL16_HIGH
+ BFD_RELOC_PPC64_TPREL34
ENUMX
- BFD_RELOC_PPC64_TPREL16_HIGHA
+ BFD_RELOC_PPC64_DTPREL34
ENUMX
- BFD_RELOC_PPC64_DTPREL16_HIGH
+ BFD_RELOC_PPC64_GOT_TLSGD34
ENUMX
- BFD_RELOC_PPC64_DTPREL16_HIGHA
+ BFD_RELOC_PPC64_GOT_TLSLD34
+ENUMX
+ BFD_RELOC_PPC64_GOT_TPREL34
+ENUMX
+ BFD_RELOC_PPC64_GOT_DTPREL34
+ENUMX
+ BFD_RELOC_PPC64_TLS_PCREL
ENUMDOC
PowerPC and PowerPC64 thread-local storage relocations.
ENUMDOC
ARM 26-bit pc-relative branch for B or conditional BL instruction.
+ENUM
+ BFD_RELOC_THUMB_PCREL_BRANCH5
+ENUMDOC
+ ARM 5-bit pc-relative branch for Branch Future instructions.
+
+ENUM
+ BFD_RELOC_THUMB_PCREL_BFCSEL
+ENUMDOC
+ ARM 6-bit pc-relative branch for BFCSEL instruction.
+
+ENUM
+ BFD_RELOC_ARM_THUMB_BF17
+ENUMDOC
+ ARM 17-bit pc-relative branch for Branch Future instructions.
+
+ENUM
+ BFD_RELOC_ARM_THUMB_BF13
+ENUMDOC
+ ARM 13-bit pc-relative branch for BFCSEL instruction.
+
+ENUM
+ BFD_RELOC_ARM_THUMB_BF19
+ENUMDOC
+ ARM 19-bit pc-relative branch for Branch Future Link instruction.
+
+ENUM
+ BFD_RELOC_ARM_THUMB_LOOP12
+ENUMDOC
+ ARM 12-bit pc-relative branch for Low Overhead Loop instructions.
+
ENUM
BFD_RELOC_THUMB_PCREL_BRANCH7
ENUMX
BFD_RELOC_ARM_T32_CP_OFF_IMM
ENUMX
BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
+ENUMX
+ BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM
ENUMX
BFD_RELOC_ARM_ADR_IMM
ENUMX
For ex9 and ifc using.
ENUM
BFD_RELOC_NDS32_TPOFF
+ENUMX
+ BFD_RELOC_NDS32_GOTTPOFF
ENUMX
BFD_RELOC_NDS32_TLS_LE_HI20
ENUMX
BFD_RELOC_NDS32_TLS_LE_LO12
+ENUMX
+ BFD_RELOC_NDS32_TLS_LE_20
+ENUMX
+ BFD_RELOC_NDS32_TLS_LE_15S0
+ENUMX
+ BFD_RELOC_NDS32_TLS_LE_15S1
+ENUMX
+ BFD_RELOC_NDS32_TLS_LE_15S2
ENUMX
BFD_RELOC_NDS32_TLS_LE_ADD
ENUMX
BFD_RELOC_NDS32_TLS_LE_LS
-ENUMX
- BFD_RELOC_NDS32_GOTTPOFF
ENUMX
BFD_RELOC_NDS32_TLS_IE_HI20
+ENUMX
+ BFD_RELOC_NDS32_TLS_IE_LO12
ENUMX
BFD_RELOC_NDS32_TLS_IE_LO12S2
ENUMX
- BFD_RELOC_NDS32_TLS_TPOFF
+ BFD_RELOC_NDS32_TLS_IEGP_HI20
ENUMX
- BFD_RELOC_NDS32_TLS_LE_20
+ BFD_RELOC_NDS32_TLS_IEGP_LO12
ENUMX
- BFD_RELOC_NDS32_TLS_LE_15S0
+ BFD_RELOC_NDS32_TLS_IEGP_LO12S2
ENUMX
- BFD_RELOC_NDS32_TLS_LE_15S1
+ BFD_RELOC_NDS32_TLS_IEGP_LW
ENUMX
- BFD_RELOC_NDS32_TLS_LE_15S2
+ BFD_RELOC_NDS32_TLS_DESC
+ENUMX
+ BFD_RELOC_NDS32_TLS_DESC_HI20
+ENUMX
+ BFD_RELOC_NDS32_TLS_DESC_LO12
+ENUMX
+ BFD_RELOC_NDS32_TLS_DESC_20
+ENUMX
+ BFD_RELOC_NDS32_TLS_DESC_SDA17S2
+ENUMX
+ BFD_RELOC_NDS32_TLS_DESC_ADD
+ENUMX
+ BFD_RELOC_NDS32_TLS_DESC_FUNC
+ENUMX
+ BFD_RELOC_NDS32_TLS_DESC_CALL
+ENUMX
+ BFD_RELOC_NDS32_TLS_DESC_MEM
+ENUMX
+ BFD_RELOC_NDS32_REMOVE
+ENUMX
+ BFD_RELOC_NDS32_GROUP
ENUMDOC
For TLS.
+ENUM
+ BFD_RELOC_NDS32_LSI
+ENUMDOC
+ For floating load store relaxation.
ENUM
Freescale S12Z reloc.
This is a 15 bit relative address. If the most significant bits are all zero
then it may be truncated to 8 bits.
-ENUM
- BFD_RELOC_16C_NUM08
-ENUMX
- BFD_RELOC_16C_NUM08_C
-ENUMX
- BFD_RELOC_16C_NUM16
-ENUMX
- BFD_RELOC_16C_NUM16_C
-ENUMX
- BFD_RELOC_16C_NUM32
-ENUMX
- BFD_RELOC_16C_NUM32_C
-ENUMX
- BFD_RELOC_16C_DISP04
-ENUMX
- BFD_RELOC_16C_DISP04_C
-ENUMX
- BFD_RELOC_16C_DISP08
-ENUMX
- BFD_RELOC_16C_DISP08_C
-ENUMX
- BFD_RELOC_16C_DISP16
-ENUMX
- BFD_RELOC_16C_DISP16_C
-ENUMX
- BFD_RELOC_16C_DISP24
-ENUMX
- BFD_RELOC_16C_DISP24_C
-ENUMX
- BFD_RELOC_16C_DISP24a
-ENUMX
- BFD_RELOC_16C_DISP24a_C
-ENUMX
- BFD_RELOC_16C_REG04
-ENUMX
- BFD_RELOC_16C_REG04_C
-ENUMX
- BFD_RELOC_16C_REG04a
-ENUMX
- BFD_RELOC_16C_REG04a_C
-ENUMX
- BFD_RELOC_16C_REG14
-ENUMX
- BFD_RELOC_16C_REG14_C
-ENUMX
- BFD_RELOC_16C_REG16
-ENUMX
- BFD_RELOC_16C_REG16_C
-ENUMX
- BFD_RELOC_16C_REG20
-ENUMX
- BFD_RELOC_16C_REG20_C
-ENUMX
- BFD_RELOC_16C_ABS20
-ENUMX
- BFD_RELOC_16C_ABS20_C
-ENUMX
- BFD_RELOC_16C_ABS24
-ENUMX
- BFD_RELOC_16C_ABS24_C
-ENUMX
- BFD_RELOC_16C_IMM04
-ENUMX
- BFD_RELOC_16C_IMM04_C
-ENUMX
- BFD_RELOC_16C_IMM16
-ENUMX
- BFD_RELOC_16C_IMM16_C
-ENUMX
- BFD_RELOC_16C_IMM20
-ENUMX
- BFD_RELOC_16C_IMM20_C
-ENUMX
- BFD_RELOC_16C_IMM24
-ENUMX
- BFD_RELOC_16C_IMM24_C
-ENUMX
- BFD_RELOC_16C_IMM32
-ENUMX
- BFD_RELOC_16C_IMM32_C
-ENUMDOC
- NS CR16C Relocations.
ENUM
BFD_RELOC_CR16_NUM8
ENUM
BFD_RELOC_OR1K_REL_26
+ENUMX
+ BFD_RELOC_OR1K_SLO16
+ENUMX
+ BFD_RELOC_OR1K_PCREL_PG21
+ENUMX
+ BFD_RELOC_OR1K_LO13
+ENUMX
+ BFD_RELOC_OR1K_SLO13
ENUMX
BFD_RELOC_OR1K_GOTPC_HI16
ENUMX
BFD_RELOC_OR1K_GOTPC_LO16
ENUMX
BFD_RELOC_OR1K_GOT16
+ENUMX
+ BFD_RELOC_OR1K_GOT_PG21
+ENUMX
+ BFD_RELOC_OR1K_GOT_LO13
ENUMX
BFD_RELOC_OR1K_PLT26
ENUMX
- BFD_RELOC_OR1K_GOTOFF_HI16
+ BFD_RELOC_OR1K_PLTA26
ENUMX
- BFD_RELOC_OR1K_GOTOFF_LO16
+ BFD_RELOC_OR1K_GOTOFF_SLO16
ENUMX
BFD_RELOC_OR1K_COPY
ENUMX
BFD_RELOC_OR1K_TLS_GD_HI16
ENUMX
BFD_RELOC_OR1K_TLS_GD_LO16
+ENUMX
+ BFD_RELOC_OR1K_TLS_GD_PG21
+ENUMX
+ BFD_RELOC_OR1K_TLS_GD_LO13
ENUMX
BFD_RELOC_OR1K_TLS_LDM_HI16
ENUMX
BFD_RELOC_OR1K_TLS_LDM_LO16
+ENUMX
+ BFD_RELOC_OR1K_TLS_LDM_PG21
+ENUMX
+ BFD_RELOC_OR1K_TLS_LDM_LO13
ENUMX
BFD_RELOC_OR1K_TLS_LDO_HI16
ENUMX
BFD_RELOC_OR1K_TLS_LDO_LO16
ENUMX
BFD_RELOC_OR1K_TLS_IE_HI16
+ENUMX
+ BFD_RELOC_OR1K_TLS_IE_AHI16
ENUMX
BFD_RELOC_OR1K_TLS_IE_LO16
+ENUMX
+ BFD_RELOC_OR1K_TLS_IE_PG21
+ENUMX
+ BFD_RELOC_OR1K_TLS_IE_LO13
ENUMX
BFD_RELOC_OR1K_TLS_LE_HI16
+ENUMX
+ BFD_RELOC_OR1K_TLS_LE_AHI16
ENUMX
BFD_RELOC_OR1K_TLS_LE_LO16
+ENUMX
+ BFD_RELOC_OR1K_TLS_LE_SLO16
ENUMX
BFD_RELOC_OR1K_TLS_TPOFF
ENUMX
BFD_RELOC_Z80_DISP8
ENUMDOC
8 bit signed offset in (ix+d) or (iy+d).
+ENUM
+ BFD_RELOC_Z80_BYTE0
+ENUMDOC
+ First 8 bits of multibyte (32, 24 or 16 bit) value.
+ENUM
+ BFD_RELOC_Z80_BYTE1
+ENUMDOC
+ Second 8 bits of multibyte (32, 24 or 16 bit) value.
+ENUM
+ BFD_RELOC_Z80_BYTE2
+ENUMDOC
+ Third 8 bits of multibyte (32 or 24 bit) value.
+ENUM
+ BFD_RELOC_Z80_BYTE3
+ENUMDOC
+ Fourth 8 bits of multibyte (32 bit) value.
+ENUM
+ BFD_RELOC_Z80_WORD0
+ENUMDOC
+ Lowest 16 bits of multibyte (32 or 24 bit) value.
+ENUM
+ BFD_RELOC_Z80_WORD1
+ENUMDOC
+ Highest 16 bits of multibyte (32 or 24 bit) value.
ENUM
BFD_RELOC_Z8K_DISP7
ENUMDOC
Tilera TILE-Gx Relocations.
+ENUM
+ BFD_RELOC_BPF_64
+ENUMX
+ BFD_RELOC_BPF_32
+ENUMX
+ BFD_RELOC_BPF_16
+ENUMX
+ BFD_RELOC_BPF_DISP16
+ENUMX
+ BFD_RELOC_BPF_DISP32
+ENUMDOC
+ Linux eBPF relocations.
+
ENUM
BFD_RELOC_EPIPHANY_SIMM8
ENUMDOC
ENUMDOC
C-SKY relocations.
+ENUM
+ BFD_RELOC_S12Z_OPR
+ENUMDOC
+ S12Z relocations.
+
ENDSENUM
BFD_RELOC_UNUSED
CODE_FRAGMENT
reloc_howto_type *
bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
{
- switch (code)
- {
- case BFD_RELOC_CTOR:
- /* The type of reloc used in a ctor, which will be as wide as the
- address - so either a 64, 32, or 16 bitter. */
- switch (bfd_arch_bits_per_address (abfd))
- {
- case 64:
- BFD_FAIL ();
- break;
- case 32:
- return &bfd_howto_32;
- case 16:
- BFD_FAIL ();
- break;
- default:
- BFD_FAIL ();
- }
- break;
- default:
- BFD_FAIL ();
- }
+ /* Very limited support is provided for relocs in generic targets
+ such as elf32-little. FIXME: Should we always return NULL? */
+ if (code == BFD_RELOC_CTOR
+ && bfd_arch_bits_per_address (abfd) == 32)
+ return &bfd_howto_32;
return NULL;
}
goto error_return;
}
- if (symbol->section && discarded_section (symbol->section))
+ /* Zap reloc field when the symbol is from a discarded
+ section, ignoring any addend. Do the same when called
+ from bfd_simple_get_relocated_section_contents for
+ undefined symbols in debug sections. This is to keep
+ debug info reasonably sane, in particular so that
+ DW_FORM_ref_addr to another file's .debug_info isn't
+ confused with an offset into the current file's
+ .debug_info. */
+ if ((symbol->section != NULL && discarded_section (symbol->section))
+ || (symbol->section == bfd_und_section_ptr
+ && (input_section->flags & SEC_DEBUGGING) != 0
+ && link_info->input_bfds == link_info->output_bfd))
{
- bfd_byte *p;
+ bfd_vma off;
static reloc_howto_type none_howto
= HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
"unused", FALSE, 0, 0, FALSE);
- p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
- _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
- p);
+ off = ((*parent)->address
+ * bfd_octets_per_byte (input_bfd, input_section));
+ _bfd_clear_contents ((*parent)->howto, input_bfd,
+ input_section, data, off);
(*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
(*parent)->addend = 0;
(*parent)->howto = &none_howto;
projects / deliverable / binutils-gdb.git / blobdiff