}
/* Is the address of the relocation really within the section? */
- if (reloc_entry->address > (input_section->_cooked_size
- / bfd_octets_per_byte (abfd)))
+ if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
return bfd_reloc_outofrange;
/* Work out which section the relocation is targeted at and the
}
/* Is the address of the relocation really within the section? */
- if (reloc_entry->address > (input_section->_cooked_size
- / bfd_octets_per_byte (abfd)))
+ if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
return bfd_reloc_outofrange;
/* Work out which section the relocation is targeted at and the
bfd_vma relocation;
/* Sanity check the address. */
- if (address > input_section->_raw_size)
+ if (address > bfd_get_section_limit (input_bfd, input_section))
return bfd_reloc_outofrange;
/* This function assumes that we are dealing with a basic relocation
The 24-bit relocation is used in some Intel 960 configurations.
+ENUM
+ BFD_RELOC_32_SECREL
+ENUMDOC
+ Section relative relocations. Some targets need this for DWARF2.
+
ENUM
BFD_RELOC_32_GOT_PCREL
ENUMX
BFD_RELOC_LO16
ENUMDOC
Low 16 bits.
-ENUM
- BFD_RELOC_PCREL_HI16_S
-ENUMDOC
- Like BFD_RELOC_HI16_S, but PC relative.
-ENUM
- BFD_RELOC_PCREL_LO16
-ENUMDOC
- Like BFD_RELOC_LO16, but PC relative.
ENUM
BFD_RELOC_MIPS_LITERAL
BFD_RELOC_ARM_OFFSET_IMM
ENUMX
BFD_RELOC_ARM_SHIFT_IMM
+ENUMX
+ BFD_RELOC_ARM_SMI
ENUMX
BFD_RELOC_ARM_SWI
ENUMX
ENUMDOC
These relocs are only used within the ARM assembler. They are not
(at present) written to any object files.
+ENUM
+ BFD_RELOC_ARM_TARGET1
+ENUMDOC
+ Pc-relative or absolute relocation depending on target. Used for
+ entries in .init_array sections.
+ENUM
+ BFD_RELOC_ARM_ROSEGREL32
+ENUMDOC
+ Read-only segment base relative address.
+ENUM
+ BFD_RELOC_ARM_SBREL32
+ENUMDOC
+ Data segment base relative address.
+ENUM
+ BFD_RELOC_ARM_TARGET2
+ENUMDOC
+ This reloc is used for References to RTTI dta from exception handling
+ tables. The actual definition depends on the target. It may be a
+ pc-relative or some form of GOT-indirect relocation.
+ENUM
+ BFD_RELOC_ARM_PREL31
+ENUMDOC
+ 31-bit PC relative address.
ENUM
BFD_RELOC_SH_PCDISP8BY2
ENUMX
BFD_RELOC_SH_PCDISP12BY2
+ENUMX
+ BFD_RELOC_SH_IMM3
+ENUMX
+ BFD_RELOC_SH_IMM3U
+ENUMX
+ BFD_RELOC_SH_DISP12
+ENUMX
+ BFD_RELOC_SH_DISP12BY2
+ENUMX
+ BFD_RELOC_SH_DISP12BY4
+ENUMX
+ BFD_RELOC_SH_DISP12BY8
+ENUMX
+ BFD_RELOC_SH_DISP20
+ENUMX
+ BFD_RELOC_SH_DISP20BY8
ENUMX
BFD_RELOC_SH_IMM4
ENUMX
BFD_RELOC_M32R_RELATIVE
ENUMX
BFD_RELOC_M32R_GOTOFF
+ENUMX
+ BFD_RELOC_M32R_GOTOFF_HI_ULO
+ENUMX
+ BFD_RELOC_M32R_GOTOFF_HI_SLO
+ENUMX
+ BFD_RELOC_M32R_GOTOFF_LO
ENUMX
BFD_RELOC_M32R_GOTPC24
ENUMX
BFD_RELOC_V850_ALIGN
ENUMDOC
Used to maintain alignment whilst relaxing.
+ENUM
+ BFD_RELOC_V850_LO16_SPLIT_OFFSET
+ENUMDOC
+ This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
+ instructions.
ENUM
BFD_RELOC_MN10300_32_PCREL
ENUMDOC
ENUMDOC
This is a 32 bit reloc for the AVR that stores 23 bit value
into 22 bits.
+ENUM
+ BFD_RELOC_AVR_LDI
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores all needed bits
+ for absolute addressing with ldi with overflow check to linktime
+ENUM
+ BFD_RELOC_AVR_6
+ENUMDOC
+ This is a 6 bit reloc for the AVR that stores offset for ldd/std
+ instructions
+ENUM
+ BFD_RELOC_AVR_6_ADIW
+ENUMDOC
+ This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
+ instructions
ENUM
BFD_RELOC_390_12
Motorola 68HC12 reloc.
This is the 5 bits of a value.
+ENUM
+ BFD_RELOC_16C_NUM08
+ENUMX
+ BFD_RELOC_16C_NUM08_C
+ENUMX
+ BFD_RELOC_16C_NUM16
+ENUMX
+ BFD_RELOC_16C_NUM16_C
+ENUMX
+ BFD_RELOC_16C_NUM32
+ENUMX
+ BFD_RELOC_16C_NUM32_C
+ENUMX
+ BFD_RELOC_16C_DISP04
+ENUMX
+ BFD_RELOC_16C_DISP04_C
+ENUMX
+ BFD_RELOC_16C_DISP08
+ENUMX
+ BFD_RELOC_16C_DISP08_C
+ENUMX
+ BFD_RELOC_16C_DISP16
+ENUMX
+ BFD_RELOC_16C_DISP16_C
+ENUMX
+ BFD_RELOC_16C_DISP24
+ENUMX
+ BFD_RELOC_16C_DISP24_C
+ENUMX
+ BFD_RELOC_16C_DISP24a
+ENUMX
+ BFD_RELOC_16C_DISP24a_C
+ENUMX
+ BFD_RELOC_16C_REG04
+ENUMX
+ BFD_RELOC_16C_REG04_C
+ENUMX
+ BFD_RELOC_16C_REG04a
+ENUMX
+ BFD_RELOC_16C_REG04a_C
+ENUMX
+ BFD_RELOC_16C_REG14
+ENUMX
+ BFD_RELOC_16C_REG14_C
+ENUMX
+ BFD_RELOC_16C_REG16
+ENUMX
+ BFD_RELOC_16C_REG16_C
+ENUMX
+ BFD_RELOC_16C_REG20
+ENUMX
+ BFD_RELOC_16C_REG20_C
+ENUMX
+ BFD_RELOC_16C_ABS20
+ENUMX
+ BFD_RELOC_16C_ABS20_C
+ENUMX
+ BFD_RELOC_16C_ABS24
+ENUMX
+ BFD_RELOC_16C_ABS24_C
+ENUMX
+ BFD_RELOC_16C_IMM04
+ENUMX
+ BFD_RELOC_16C_IMM04_C
+ENUMX
+ BFD_RELOC_16C_IMM16
+ENUMX
+ BFD_RELOC_16C_IMM16_C
+ENUMX
+ BFD_RELOC_16C_IMM20
+ENUMX
+ BFD_RELOC_16C_IMM20_C
+ENUMX
+ BFD_RELOC_16C_IMM24
+ENUMX
+ BFD_RELOC_16C_IMM24_C
+ENUMX
+ BFD_RELOC_16C_IMM32
+ENUMX
+ BFD_RELOC_16C_IMM32_C
+ENUMDOC
+ NS CR16C Relocations.
+
+ENUM
+ BFD_RELOC_CRX_REL4
+ENUMX
+ BFD_RELOC_CRX_REL8
+ENUMX
+ BFD_RELOC_CRX_REL8_CMP
+ENUMX
+ BFD_RELOC_CRX_REL16
+ENUMX
+ BFD_RELOC_CRX_REL24
+ENUMX
+ BFD_RELOC_CRX_REL32
+ENUMX
+ BFD_RELOC_CRX_REGREL12
+ENUMX
+ BFD_RELOC_CRX_REGREL22
+ENUMX
+ BFD_RELOC_CRX_REGREL28
+ENUMX
+ BFD_RELOC_CRX_REGREL32
+ENUMX
+ BFD_RELOC_CRX_ABS16
+ENUMX
+ BFD_RELOC_CRX_ABS32
+ENUMX
+ BFD_RELOC_CRX_NUM8
+ENUMX
+ BFD_RELOC_CRX_NUM16
+ENUMX
+ BFD_RELOC_CRX_NUM32
+ENUMX
+ BFD_RELOC_CRX_IMM16
+ENUMX
+ BFD_RELOC_CRX_IMM32
+ENUMX
+ BFD_RELOC_CRX_SWITCH8
+ENUMX
+ BFD_RELOC_CRX_SWITCH16
+ENUMX
+ BFD_RELOC_CRX_SWITCH32
+ENUMDOC
+ NS CRX Relocations.
+
ENUM
BFD_RELOC_CRIS_BDISP8
ENUMX
BFD_RELOC_CRIS_SIGNED_6
ENUMX
BFD_RELOC_CRIS_UNSIGNED_6
+ENUMX
+ BFD_RELOC_CRIS_SIGNED_8
+ENUMX
+ BFD_RELOC_CRIS_UNSIGNED_8
+ENUMX
+ BFD_RELOC_CRIS_SIGNED_16
+ENUMX
+ BFD_RELOC_CRIS_UNSIGNED_16
+ENUMX
+ BFD_RELOC_CRIS_LAPCQ_OFFSET
ENUMX
BFD_RELOC_CRIS_UNSIGNED_4
ENUMDOC
BFD_RELOC_MSP430_16_PCREL_BYTE
ENUMX
BFD_RELOC_MSP430_16_BYTE
+ENUMX
+ BFD_RELOC_MSP430_2X_PCREL
+ENUMX
+ BFD_RELOC_MSP430_RL_PCREL
ENUMDOC
msp430 specific relocation codes
ENUMDOC
Xtensa relocation used in ELF object files for symbols that may require
PLT entries. Otherwise, this is just a generic 32-bit relocation.
+ENUM
+ BFD_RELOC_XTENSA_DIFF8
+ENUMX
+ BFD_RELOC_XTENSA_DIFF16
+ENUMX
+ BFD_RELOC_XTENSA_DIFF32
+ENUMDOC
+ Xtensa relocations to mark the difference of two local symbols.
+ These are only needed to support linker relaxation and can be ignored
+ when not relaxing. The field is set to the value of the difference
+ assuming no relaxation. The relocation encodes the position of the
+ first symbol so the linker can determine whether to adjust the field
+ value.
+ENUM
+ BFD_RELOC_XTENSA_SLOT0_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT1_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT2_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT3_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT4_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT5_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT6_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT7_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT8_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT9_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT10_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT11_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT12_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT13_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT14_OP
+ENUMDOC
+ Generic Xtensa relocations for instruction operands. Only the slot
+ number is encoded in the relocation. The relocation applies to the
+ last PC-relative immediate operand, or if there are no PC-relative
+ immediates, to the last immediate operand.
+ENUM
+ BFD_RELOC_XTENSA_SLOT0_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT1_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT2_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT3_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT4_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT5_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT6_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT7_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT8_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT9_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT10_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT11_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT12_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT13_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT14_ALT
+ENUMDOC
+ Alternate Xtensa relocations. Only the slot is encoded in the
+ relocation. The meaning of these relocations is opcode-specific.
ENUM
BFD_RELOC_XTENSA_OP0
ENUMX
ENUMX
BFD_RELOC_XTENSA_OP2
ENUMDOC
- Generic Xtensa relocations. Only the operand number is encoded
- in the relocation. The details are determined by extracting the
- instruction opcode.
+ Xtensa relocations for backward compatibility. These have all been
+ replaced by BFD_RELOC_XTENSA_SLOT0_OP.
ENUM
BFD_RELOC_XTENSA_ASM_EXPAND
ENUMDOC
DESCRIPTION
Provides default handling for relaxing for back ends which
- don't do relaxing -- i.e., does nothing except make sure that the
- final size of the section is set.
+ don't do relaxing.
*/
bfd_boolean
struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
bfd_boolean *again)
{
- /* We're not relaxing the section, so just copy the size info if it's
- zero. Someone else, like bfd_merge_sections, might have set it, so
- don't overwrite a non-zero value. */
- if (section->_cooked_size == 0)
- section->_cooked_size = section->_raw_size;
*again = FALSE;
return TRUE;
}
long reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
arelent **reloc_vector = NULL;
long reloc_count;
+ bfd_size_type sz;
if (reloc_size < 0)
goto error_return;
goto error_return;
/* Read in the section. */
- if (!bfd_get_section_contents (input_bfd,
- input_section,
- data,
- 0,
- input_section->_raw_size))
+ sz = input_section->rawsize ? input_section->rawsize : input_section->size;
+ if (!bfd_get_section_contents (input_bfd, input_section, data, 0, sz))
goto error_return;
- /* Don't set input_section->_cooked_size here. The caller has set
- _cooked_size or called bfd_relax_section, which sets _cooked_size.
- Despite using this generic relocation function, some targets perform
- target-specific relaxation or string merging, which happens before
- this function is called. We do not want to clobber the _cooked_size
- they computed. */
-
- input_section->reloc_done = TRUE;
-
reloc_count = bfd_canonicalize_reloc (input_bfd,
input_section,
reloc_vector,
break;
case bfd_reloc_overflow:
if (!((*link_info->callbacks->reloc_overflow)
- (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
+ (link_info, NULL,
+ bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
(*parent)->howto->name, (*parent)->addend,
input_bfd, input_section, (*parent)->address)))
goto error_return;
projects / deliverable / binutils-gdb.git / blobdiff