/* BFD support for handling relocation entries.
- Copyright (C) 1990-2018 Free Software Foundation, Inc.
+ Copyright (C) 1990-2020 Free Software Foundation, Inc.
Written by Cygnus Support.
This file is part of BFD, the Binary File Descriptor library.
. bfd *, char **);
.
. {* The textual name of the relocation type. *}
-. char *name;
+. const char *name;
.};
.
*/
return bfd_reloc_undefined;
/* Is the address of the relocation really within the section? */
- octets = reloc_entry->address * bfd_octets_per_byte (abfd);
+ octets = reloc_entry->address * bfd_octets_per_byte (abfd, input_section);
if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
return bfd_reloc_outofrange;
else
output_base = reloc_target_output_section->vma;
- relocation += output_base + symbol->section->output_offset;
+ output_base += symbol->section->output_offset;
+
+ /* If symbol addresses are in octets, convert to bytes. */
+ if (bfd_get_flavour (abfd) == bfd_target_elf_flavour
+ && (symbol->section->flags & SEC_ELF_OCTETS))
+ output_base *= bfd_octets_per_byte (abfd, input_section);
+
+ relocation += output_base;
/* Add in supplied addend. */
relocation += reloc_entry->addend;
it will have been checked in `bfd_perform_relocation already'. */
/* Is the address of the relocation really within the section? */
- octets = reloc_entry->address * bfd_octets_per_byte (abfd);
+ octets = reloc_entry->address * bfd_octets_per_byte (abfd, input_section);
if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
return bfd_reloc_outofrange;
else
output_base = reloc_target_output_section->vma;
- relocation += output_base + symbol->section->output_offset;
+ output_base += symbol->section->output_offset;
+
+ /* If symbol addresses are in octets, convert to bytes. */
+ if (bfd_get_flavour (abfd) == bfd_target_elf_flavour
+ && (symbol->section->flags & SEC_ELF_OCTETS))
+ output_base *= bfd_octets_per_byte (abfd, input_section);
+
+ relocation += output_base;
/* Add in supplied addend. */
relocation += reloc_entry->addend;
bfd_vma addend)
{
bfd_vma relocation;
- bfd_size_type octets = address * bfd_octets_per_byte (input_bfd);
+ bfd_size_type octets = (address
+ * bfd_octets_per_byte (input_bfd, input_section));
/* Sanity check the address. */
if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, octets))
}
return _bfd_relocate_contents (howto, input_bfd, relocation,
- contents
- + address * bfd_octets_per_byte (input_bfd));
+ contents + octets);
}
/* Relocate a given location using a given value and howto. */
relocations against discarded symbols, to make ignorable debug or unwind
information more obvious. */
-void
+bfd_reloc_status_type
_bfd_clear_contents (reloc_howto_type *howto,
bfd *input_bfd,
asection *input_section,
- bfd_byte *location)
+ bfd_byte *buf,
+ bfd_vma off)
{
bfd_vma x;
+ bfd_byte *location;
+
+ if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, off))
+ return bfd_reloc_outofrange;
/* Get the value we are going to relocate. */
+ location = buf + off;
x = read_reloc (input_bfd, location, howto);
/* Zero out the unwanted bits of X. */
/* For a range list, use 1 instead of 0 as placeholder. 0
would terminate the list, hiding any later entries. */
- if (strcmp (bfd_get_section_name (input_bfd, input_section),
- ".debug_ranges") == 0
+ if (strcmp (bfd_section_name (input_section), ".debug_ranges") == 0
&& (howto->dst_mask & 1) != 0)
x |= 1;
/* Put the relocated value back in the object file. */
write_reloc (input_bfd, x, location, howto);
+ return bfd_reloc_ok;
}
/*
BFD_RELOC_PPC64_ENTRY
ENUMX
BFD_RELOC_PPC64_REL24_NOTOC
+ENUMX
+ BFD_RELOC_PPC64_D34
+ENUMX
+ BFD_RELOC_PPC64_D34_LO
+ENUMX
+ BFD_RELOC_PPC64_D34_HI30
+ENUMX
+ BFD_RELOC_PPC64_D34_HA30
+ENUMX
+ BFD_RELOC_PPC64_PCREL34
+ENUMX
+ BFD_RELOC_PPC64_GOT_PCREL34
+ENUMX
+ BFD_RELOC_PPC64_PLT_PCREL34
+ENUMX
+ BFD_RELOC_PPC64_ADDR16_HIGHER34
+ENUMX
+ BFD_RELOC_PPC64_ADDR16_HIGHERA34
+ENUMX
+ BFD_RELOC_PPC64_ADDR16_HIGHEST34
+ENUMX
+ BFD_RELOC_PPC64_ADDR16_HIGHESTA34
+ENUMX
+ BFD_RELOC_PPC64_REL16_HIGHER34
+ENUMX
+ BFD_RELOC_PPC64_REL16_HIGHERA34
+ENUMX
+ BFD_RELOC_PPC64_REL16_HIGHEST34
+ENUMX
+ BFD_RELOC_PPC64_REL16_HIGHESTA34
+ENUMX
+ BFD_RELOC_PPC64_D28
+ENUMX
+ BFD_RELOC_PPC64_PCREL28
ENUMDOC
Power(rs6000) and PowerPC relocations.
BFD_RELOC_PPC64_TPREL16_DS
ENUMX
BFD_RELOC_PPC64_TPREL16_LO_DS
+ENUMX
+ BFD_RELOC_PPC64_TPREL16_HIGH
+ENUMX
+ BFD_RELOC_PPC64_TPREL16_HIGHA
ENUMX
BFD_RELOC_PPC64_TPREL16_HIGHER
ENUMX
BFD_RELOC_PPC64_DTPREL16_DS
ENUMX
BFD_RELOC_PPC64_DTPREL16_LO_DS
+ENUMX
+ BFD_RELOC_PPC64_DTPREL16_HIGH
+ENUMX
+ BFD_RELOC_PPC64_DTPREL16_HIGHA
ENUMX
BFD_RELOC_PPC64_DTPREL16_HIGHER
ENUMX
ENUMX
BFD_RELOC_PPC64_DTPREL16_HIGHESTA
ENUMX
- BFD_RELOC_PPC64_TPREL16_HIGH
+ BFD_RELOC_PPC64_TPREL34
ENUMX
- BFD_RELOC_PPC64_TPREL16_HIGHA
+ BFD_RELOC_PPC64_DTPREL34
ENUMX
- BFD_RELOC_PPC64_DTPREL16_HIGH
+ BFD_RELOC_PPC64_GOT_TLSGD34
ENUMX
- BFD_RELOC_PPC64_DTPREL16_HIGHA
+ BFD_RELOC_PPC64_GOT_TLSLD34
+ENUMX
+ BFD_RELOC_PPC64_GOT_TPREL34
+ENUMX
+ BFD_RELOC_PPC64_GOT_DTPREL34
+ENUMX
+ BFD_RELOC_PPC64_TLS_PCREL
ENUMDOC
PowerPC and PowerPC64 thread-local storage relocations.
ENUMDOC
ARM 26-bit pc-relative branch for B or conditional BL instruction.
+ENUM
+ BFD_RELOC_THUMB_PCREL_BRANCH5
+ENUMDOC
+ ARM 5-bit pc-relative branch for Branch Future instructions.
+
+ENUM
+ BFD_RELOC_THUMB_PCREL_BFCSEL
+ENUMDOC
+ ARM 6-bit pc-relative branch for BFCSEL instruction.
+
+ENUM
+ BFD_RELOC_ARM_THUMB_BF17
+ENUMDOC
+ ARM 17-bit pc-relative branch for Branch Future instructions.
+
+ENUM
+ BFD_RELOC_ARM_THUMB_BF13
+ENUMDOC
+ ARM 13-bit pc-relative branch for BFCSEL instruction.
+
+ENUM
+ BFD_RELOC_ARM_THUMB_BF19
+ENUMDOC
+ ARM 19-bit pc-relative branch for Branch Future Link instruction.
+
+ENUM
+ BFD_RELOC_ARM_THUMB_LOOP12
+ENUMDOC
+ ARM 12-bit pc-relative branch for Low Overhead Loop instructions.
+
ENUM
BFD_RELOC_THUMB_PCREL_BRANCH7
ENUMX
BFD_RELOC_ARM_T32_CP_OFF_IMM
ENUMX
BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
+ENUMX
+ BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM
ENUMX
BFD_RELOC_ARM_ADR_IMM
ENUMX
Freescale S12Z reloc.
This is a 15 bit relative address. If the most significant bits are all zero
then it may be truncated to 8 bits.
-ENUM
- BFD_RELOC_16C_NUM08
-ENUMX
- BFD_RELOC_16C_NUM08_C
-ENUMX
- BFD_RELOC_16C_NUM16
-ENUMX
- BFD_RELOC_16C_NUM16_C
-ENUMX
- BFD_RELOC_16C_NUM32
-ENUMX
- BFD_RELOC_16C_NUM32_C
-ENUMX
- BFD_RELOC_16C_DISP04
-ENUMX
- BFD_RELOC_16C_DISP04_C
-ENUMX
- BFD_RELOC_16C_DISP08
-ENUMX
- BFD_RELOC_16C_DISP08_C
-ENUMX
- BFD_RELOC_16C_DISP16
-ENUMX
- BFD_RELOC_16C_DISP16_C
-ENUMX
- BFD_RELOC_16C_DISP24
-ENUMX
- BFD_RELOC_16C_DISP24_C
-ENUMX
- BFD_RELOC_16C_DISP24a
-ENUMX
- BFD_RELOC_16C_DISP24a_C
-ENUMX
- BFD_RELOC_16C_REG04
-ENUMX
- BFD_RELOC_16C_REG04_C
-ENUMX
- BFD_RELOC_16C_REG04a
-ENUMX
- BFD_RELOC_16C_REG04a_C
-ENUMX
- BFD_RELOC_16C_REG14
-ENUMX
- BFD_RELOC_16C_REG14_C
-ENUMX
- BFD_RELOC_16C_REG16
-ENUMX
- BFD_RELOC_16C_REG16_C
-ENUMX
- BFD_RELOC_16C_REG20
-ENUMX
- BFD_RELOC_16C_REG20_C
-ENUMX
- BFD_RELOC_16C_ABS20
-ENUMX
- BFD_RELOC_16C_ABS20_C
-ENUMX
- BFD_RELOC_16C_ABS24
-ENUMX
- BFD_RELOC_16C_ABS24_C
-ENUMX
- BFD_RELOC_16C_IMM04
-ENUMX
- BFD_RELOC_16C_IMM04_C
-ENUMX
- BFD_RELOC_16C_IMM16
-ENUMX
- BFD_RELOC_16C_IMM16_C
-ENUMX
- BFD_RELOC_16C_IMM20
-ENUMX
- BFD_RELOC_16C_IMM20_C
-ENUMX
- BFD_RELOC_16C_IMM24
-ENUMX
- BFD_RELOC_16C_IMM24_C
-ENUMX
- BFD_RELOC_16C_IMM32
-ENUMX
- BFD_RELOC_16C_IMM32_C
-ENUMDOC
- NS CR16C Relocations.
ENUM
BFD_RELOC_CR16_NUM8
BFD_RELOC_Z80_DISP8
ENUMDOC
8 bit signed offset in (ix+d) or (iy+d).
+ENUM
+ BFD_RELOC_Z80_BYTE0
+ENUMDOC
+ First 8 bits of multibyte (32, 24 or 16 bit) value.
+ENUM
+ BFD_RELOC_Z80_BYTE1
+ENUMDOC
+ Second 8 bits of multibyte (32, 24 or 16 bit) value.
+ENUM
+ BFD_RELOC_Z80_BYTE2
+ENUMDOC
+ Third 8 bits of multibyte (32 or 24 bit) value.
+ENUM
+ BFD_RELOC_Z80_BYTE3
+ENUMDOC
+ Fourth 8 bits of multibyte (32 bit) value.
+ENUM
+ BFD_RELOC_Z80_WORD0
+ENUMDOC
+ Lowest 16 bits of multibyte (32 or 24 bit) value.
+ENUM
+ BFD_RELOC_Z80_WORD1
+ENUMDOC
+ Highest 16 bits of multibyte (32 or 24 bit) value.
+ENUM
+ BFD_RELOC_Z80_16_BE
+ENUMDOC
+ Like BFD_RELOC_16 but big-endian.
ENUM
BFD_RELOC_Z8K_DISP7
ENUMDOC
Tilera TILE-Gx Relocations.
+ENUM
+ BFD_RELOC_BPF_64
+ENUMX
+ BFD_RELOC_BPF_32
+ENUMX
+ BFD_RELOC_BPF_16
+ENUMX
+ BFD_RELOC_BPF_DISP16
+ENUMX
+ BFD_RELOC_BPF_DISP32
+ENUMDOC
+ Linux eBPF relocations.
+
ENUM
BFD_RELOC_EPIPHANY_SIMM8
ENUMDOC
ENUMDOC
C-SKY relocations.
+ENUM
+ BFD_RELOC_S12Z_OPR
+ENUMDOC
+ S12Z relocations.
+
ENDSENUM
BFD_RELOC_UNUSED
CODE_FRAGMENT
reloc_howto_type *
bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
{
- switch (code)
- {
- case BFD_RELOC_CTOR:
- /* The type of reloc used in a ctor, which will be as wide as the
- address - so either a 64, 32, or 16 bitter. */
- switch (bfd_arch_bits_per_address (abfd))
- {
- case 64:
- BFD_FAIL ();
- break;
- case 32:
- return &bfd_howto_32;
- case 16:
- BFD_FAIL ();
- break;
- default:
- BFD_FAIL ();
- }
- break;
- default:
- BFD_FAIL ();
- }
+ /* Very limited support is provided for relocs in generic targets
+ such as elf32-little. FIXME: Should we always return NULL? */
+ if (code == BFD_RELOC_CTOR
+ && bfd_arch_bits_per_address (abfd) == 32)
+ return &bfd_howto_32;
return NULL;
}
&& (input_section->flags & SEC_DEBUGGING) != 0
&& link_info->input_bfds == link_info->output_bfd))
{
- bfd_byte *p;
+ bfd_vma off;
static reloc_howto_type none_howto
= HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
"unused", FALSE, 0, 0, FALSE);
- p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
- _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
- p);
+ off = ((*parent)->address
+ * bfd_octets_per_byte (input_bfd, input_section));
+ _bfd_clear_contents ((*parent)->howto, input_bfd,
+ input_section, data, off);
(*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
(*parent)->addend = 0;
(*parent)->howto = &none_howto;
free (reloc_vector);
return data;
-error_return:
+ error_return:
free (reloc_vector);
return NULL;
}
projects / deliverable / binutils-gdb.git / blobdiff