/* BFD support for handling relocation entries.
Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2003, 2004
+ 2000, 2001, 2002, 2003, 2004, 2005
Free Software Foundation, Inc.
Written by Cygnus Support.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
/*
SECTION
&& strcmp (abfd->xvec->name, "coff-Intel-little") != 0
&& strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
{
-#if 1
/* For m68k-coff, the addend was being subtracted twice during
relocation with -r. Removing the line below this comment
fixes that problem; see PR 2953.
right
*/
relocation -= reloc_entry->addend;
-#endif
reloc_entry->addend = 0;
}
else
&& strcmp (abfd->xvec->name, "coff-Intel-little") != 0
&& strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
{
-#if 1
-/* For m68k-coff, the addend was being subtracted twice during
- relocation with -r. Removing the line below this comment
- fixes that problem; see PR 2953.
+
+ /* For m68k-coff, the addend was being subtracted twice during
+ relocation with -r. Removing the line below this comment
+ fixes that problem; see PR 2953.
However, Ian wrote the following, regarding removing the line below,
which explains why it is still enabled: --djm
7) if they are different you have to figure out which version is
right. */
relocation -= reloc_entry->addend;
-#endif
- reloc_entry->addend = 0;
+ /* FIXME: There should be no target specific code here... */
+ if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
+ reloc_entry->addend = 0;
}
else
{
ENUMDOC
Low 16 bits.
+ENUM
+ BFD_RELOC_HI16_PCREL
+ENUMDOC
+ High 16 bits of 32-bit pc-relative value
+ENUM
+ BFD_RELOC_HI16_S_PCREL
+ENUMDOC
+ High 16 bits of 32-bit pc-relative value, adjusted
+ENUM
+ BFD_RELOC_LO16_PCREL
+ENUMDOC
+ Low 16 bits of pc-relative value
+
+ENUM
+ BFD_RELOC_MIPS16_HI16
+ENUMDOC
+ MIPS16 high 16 bits of 32-bit value.
+ENUM
+ BFD_RELOC_MIPS16_HI16_S
+ENUMDOC
+ MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
+ extended and added to form the final result. If the low 16
+ bits form a negative number, we need to add one to the high value
+ to compensate for the borrow when the low bits are added.
+ENUM
+ BFD_RELOC_MIPS16_LO16
+ENUMDOC
+ MIPS16 low 16 bits.
+
ENUM
BFD_RELOC_MIPS_LITERAL
ENUMDOC
BFD_RELOC_MIPS_RELGOT
ENUMX
BFD_RELOC_MIPS_JALR
+ENUMX
+ BFD_RELOC_MIPS_TLS_DTPMOD32
+ENUMX
+ BFD_RELOC_MIPS_TLS_DTPREL32
+ENUMX
+ BFD_RELOC_MIPS_TLS_DTPMOD64
+ENUMX
+ BFD_RELOC_MIPS_TLS_DTPREL64
+ENUMX
+ BFD_RELOC_MIPS_TLS_GD
+ENUMX
+ BFD_RELOC_MIPS_TLS_LDM
+ENUMX
+ BFD_RELOC_MIPS_TLS_DTPREL_HI16
+ENUMX
+ BFD_RELOC_MIPS_TLS_DTPREL_LO16
+ENUMX
+ BFD_RELOC_MIPS_TLS_GOTTPREL
+ENUMX
+ BFD_RELOC_MIPS_TLS_TPREL32
+ENUMX
+ BFD_RELOC_MIPS_TLS_TPREL64
+ENUMX
+ BFD_RELOC_MIPS_TLS_TPREL_HI16
+ENUMX
+ BFD_RELOC_MIPS_TLS_TPREL_LO16
ENUMDOC
MIPS ELF relocations.
COMMENT
BFD_RELOC_FRV_GOTOFFHI
ENUMX
BFD_RELOC_FRV_GOTOFFLO
+ENUMX
+ BFD_RELOC_FRV_GETTLSOFF
+ENUMX
+ BFD_RELOC_FRV_TLSDESC_VALUE
+ENUMX
+ BFD_RELOC_FRV_GOTTLSDESC12
+ENUMX
+ BFD_RELOC_FRV_GOTTLSDESCHI
+ENUMX
+ BFD_RELOC_FRV_GOTTLSDESCLO
+ENUMX
+ BFD_RELOC_FRV_TLSMOFF12
+ENUMX
+ BFD_RELOC_FRV_TLSMOFFHI
+ENUMX
+ BFD_RELOC_FRV_TLSMOFFLO
+ENUMX
+ BFD_RELOC_FRV_GOTTLSOFF12
+ENUMX
+ BFD_RELOC_FRV_GOTTLSOFFHI
+ENUMX
+ BFD_RELOC_FRV_GOTTLSOFFLO
+ENUMX
+ BFD_RELOC_FRV_TLSOFF
+ENUMX
+ BFD_RELOC_FRV_TLSDESC_RELAX
+ENUMX
+ BFD_RELOC_FRV_GETTLSOFF_RELAX
+ENUMX
+ BFD_RELOC_FRV_TLSOFF_RELAX
+ENUMX
+ BFD_RELOC_FRV_TLSMOFF
ENUMDOC
Fujitsu Frv Relocations.
COMMENT
BFD_RELOC_X86_64_GOTTPOFF
ENUMX
BFD_RELOC_X86_64_TPOFF32
+ENUMX
+ BFD_RELOC_X86_64_GOTOFF64
+ENUMX
+ BFD_RELOC_X86_64_GOTPC32
ENUMDOC
x86-64/elf relocations
Thumb 22 bit pc-relative branch. The lowest bit must be zero and is
not stored in the instruction. The 2nd lowest bit comes from a 1 bit
field in the instruction.
+
+ENUM
+ BFD_RELOC_THUMB_PCREL_BRANCH7
+ENUMX
+ BFD_RELOC_THUMB_PCREL_BRANCH9
+ENUMX
+ BFD_RELOC_THUMB_PCREL_BRANCH12
+ENUMX
+ BFD_RELOC_THUMB_PCREL_BRANCH20
+ENUMX
+ BFD_RELOC_THUMB_PCREL_BRANCH23
+ENUMX
+ BFD_RELOC_THUMB_PCREL_BRANCH25
+ENUMDOC
+ Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
+ The lowest bit must be zero and is not stored in the instruction.
+ Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
+ "nn" one smaller in all cases. Note further that BRANCH23
+ corresponds to R_ARM_THM_CALL.
+
+ENUM
+ BFD_RELOC_ARM_OFFSET_IMM
+ENUMDOC
+ 12-bit immediate offset, used in ARM-format ldr and str instructions.
+
+ENUM
+ BFD_RELOC_ARM_THUMB_OFFSET
+ENUMDOC
+ 5-bit immediate offset, used in Thumb-format ldr and str instructions.
+
+ENUM
+ BFD_RELOC_ARM_TARGET1
+ENUMDOC
+ Pc-relative or absolute relocation depending on target. Used for
+ entries in .init_array sections.
+ENUM
+ BFD_RELOC_ARM_ROSEGREL32
+ENUMDOC
+ Read-only segment base relative address.
+ENUM
+ BFD_RELOC_ARM_SBREL32
+ENUMDOC
+ Data segment base relative address.
+ENUM
+ BFD_RELOC_ARM_TARGET2
+ENUMDOC
+ This reloc is used for references to RTTI data from exception handling
+ tables. The actual definition depends on the target. It may be a
+ pc-relative or some form of GOT-indirect relocation.
+ENUM
+ BFD_RELOC_ARM_PREL31
+ENUMDOC
+ 31-bit PC relative address.
+
+ENUM
+ BFD_RELOC_ARM_JUMP_SLOT
+ENUMX
+ BFD_RELOC_ARM_GLOB_DAT
+ENUMX
+ BFD_RELOC_ARM_GOT32
+ENUMX
+ BFD_RELOC_ARM_PLT32
+ENUMX
+ BFD_RELOC_ARM_RELATIVE
+ENUMX
+ BFD_RELOC_ARM_GOTOFF
+ENUMX
+ BFD_RELOC_ARM_GOTPC
+ENUMDOC
+ Relocations for setting up GOTs and PLTs for shared libraries.
+
+ENUM
+ BFD_RELOC_ARM_TLS_GD32
+ENUMX
+ BFD_RELOC_ARM_TLS_LDO32
+ENUMX
+ BFD_RELOC_ARM_TLS_LDM32
+ENUMX
+ BFD_RELOC_ARM_TLS_DTPOFF32
+ENUMX
+ BFD_RELOC_ARM_TLS_DTPMOD32
+ENUMX
+ BFD_RELOC_ARM_TLS_TPOFF32
+ENUMX
+ BFD_RELOC_ARM_TLS_IE32
+ENUMX
+ BFD_RELOC_ARM_TLS_LE32
+ENUMDOC
+ ARM thread-local storage relocations.
+
ENUM
BFD_RELOC_ARM_IMMEDIATE
ENUMX
BFD_RELOC_ARM_ADRL_IMMEDIATE
ENUMX
- BFD_RELOC_ARM_OFFSET_IMM
+ BFD_RELOC_ARM_T32_IMMEDIATE
+ENUMX
+ BFD_RELOC_ARM_T32_IMM12
+ENUMX
+ BFD_RELOC_ARM_T32_ADD_PC12
ENUMX
BFD_RELOC_ARM_SHIFT_IMM
+ENUMX
+ BFD_RELOC_ARM_SMI
ENUMX
BFD_RELOC_ARM_SWI
ENUMX
BFD_RELOC_ARM_IN_POOL
ENUMX
BFD_RELOC_ARM_OFFSET_IMM8
+ENUMX
+ BFD_RELOC_ARM_T32_OFFSET_U8
+ENUMX
+ BFD_RELOC_ARM_T32_OFFSET_IMM
ENUMX
BFD_RELOC_ARM_HWLITERAL
ENUMX
BFD_RELOC_ARM_THUMB_IMM
ENUMX
BFD_RELOC_ARM_THUMB_SHIFT
-ENUMX
- BFD_RELOC_ARM_THUMB_OFFSET
-ENUMX
- BFD_RELOC_ARM_GOT12
-ENUMX
- BFD_RELOC_ARM_GOT32
-ENUMX
- BFD_RELOC_ARM_JUMP_SLOT
-ENUMX
- BFD_RELOC_ARM_COPY
-ENUMX
- BFD_RELOC_ARM_GLOB_DAT
-ENUMX
- BFD_RELOC_ARM_PLT32
-ENUMX
- BFD_RELOC_ARM_RELATIVE
-ENUMX
- BFD_RELOC_ARM_GOTOFF
-ENUMX
- BFD_RELOC_ARM_GOTPC
ENUMDOC
These relocs are only used within the ARM assembler. They are not
(at present) written to any object files.
-ENUM
- BFD_RELOC_ARM_TARGET1
-ENUMDOC
- Pc-relative or absolute relocation depending on target. Used for
- entries in .init_array sections.
-ENUM
- BFD_RELOC_ARM_ROSEGREL32
-ENUMDOC
- Read-only segment base relative address.
-ENUM
- BFD_RELOC_ARM_SBREL32
-ENUMDOC
- Data segment base relative address.
ENUM
BFD_RELOC_SH_PCDISP8BY2
ENUMDOC
Renesas / SuperH SH relocs. Not all of these appear in object files.
-ENUM
- BFD_RELOC_THUMB_PCREL_BRANCH9
-ENUMX
- BFD_RELOC_THUMB_PCREL_BRANCH12
-ENUMX
- BFD_RELOC_THUMB_PCREL_BRANCH23
-ENUMDOC
- Thumb 23-, 12- and 9-bit pc-relative branches. The lowest bit must
- be zero and is not stored in the instruction.
-
ENUM
BFD_RELOC_ARC_B22_PCREL
ENUMDOC
ENUMDOC
DLX relocs
+ENUM
+ BFD_RELOC_M32C_HI8
+ENUMDOC
+ Renesas M16C/M32C Relocations.
+
ENUM
BFD_RELOC_M32R_24
ENUMDOC
BFD_RELOC_V850_ALIGN
ENUMDOC
Used to maintain alignment whilst relaxing.
+ENUM
+ BFD_RELOC_V850_LO16_SPLIT_OFFSET
+ENUMDOC
+ This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
+ instructions.
ENUM
BFD_RELOC_MN10300_32_PCREL
ENUMDOC
ENUMDOC
This is a 32 bit reloc for the AVR that stores 23 bit value
into 22 bits.
+ENUM
+ BFD_RELOC_AVR_LDI
+ENUMDOC
+ This is a 16 bit reloc for the AVR that stores all needed bits
+ for absolute addressing with ldi with overflow check to linktime
+ENUM
+ BFD_RELOC_AVR_6
+ENUMDOC
+ This is a 6 bit reloc for the AVR that stores offset for ldd/std
+ instructions
+ENUM
+ BFD_RELOC_AVR_6_ADIW
+ENUMDOC
+ This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
+ instructions
ENUM
BFD_RELOC_390_12
ENUMDOC
NS CR16C Relocations.
-ENUM
+ENUM
BFD_RELOC_CRX_REL4
ENUMX
BFD_RELOC_CRX_REL8
BFD_RELOC_CRIS_SIGNED_6
ENUMX
BFD_RELOC_CRIS_UNSIGNED_6
+ENUMX
+ BFD_RELOC_CRIS_SIGNED_8
+ENUMX
+ BFD_RELOC_CRIS_UNSIGNED_8
+ENUMX
+ BFD_RELOC_CRIS_SIGNED_16
+ENUMX
+ BFD_RELOC_CRIS_UNSIGNED_16
+ENUMX
+ BFD_RELOC_CRIS_LAPCQ_OFFSET
ENUMX
BFD_RELOC_CRIS_UNSIGNED_4
ENUMDOC
ENUMDOC
Relocations used by VAX ELF.
+ENUM
+ BFD_RELOC_MS1_PC16
+ENUMDOC
+ Morpho MS1 - 16 bit immediate relocation.
+ENUM
+ BFD_RELOC_MS1_HI16
+ENUMDOC
+ Morpho MS1 - Hi 16 bits of an address.
+ENUM
+ BFD_RELOC_MS1_LO16
+ENUMDOC
+ Morpho MS1 - Low 16 bits of an address.
+ENUM
+ BFD_RELOC_MS1_GNU_VTINHERIT
+ENUMDOC
+ Morpho MS1 - Used to tell the linker which vtable entries are used.
+ENUM
+ BFD_RELOC_MS1_GNU_VTENTRY
+ENUMDOC
+ Morpho MS1 - Used to tell the linker which vtable entries are used.
+
ENUM
BFD_RELOC_MSP430_10_PCREL
ENUMX
ENUMDOC
Xtensa relocation used in ELF object files for symbols that may require
PLT entries. Otherwise, this is just a generic 32-bit relocation.
+ENUM
+ BFD_RELOC_XTENSA_DIFF8
+ENUMX
+ BFD_RELOC_XTENSA_DIFF16
+ENUMX
+ BFD_RELOC_XTENSA_DIFF32
+ENUMDOC
+ Xtensa relocations to mark the difference of two local symbols.
+ These are only needed to support linker relaxation and can be ignored
+ when not relaxing. The field is set to the value of the difference
+ assuming no relaxation. The relocation encodes the position of the
+ first symbol so the linker can determine whether to adjust the field
+ value.
+ENUM
+ BFD_RELOC_XTENSA_SLOT0_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT1_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT2_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT3_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT4_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT5_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT6_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT7_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT8_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT9_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT10_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT11_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT12_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT13_OP
+ENUMX
+ BFD_RELOC_XTENSA_SLOT14_OP
+ENUMDOC
+ Generic Xtensa relocations for instruction operands. Only the slot
+ number is encoded in the relocation. The relocation applies to the
+ last PC-relative immediate operand, or if there are no PC-relative
+ immediates, to the last immediate operand.
+ENUM
+ BFD_RELOC_XTENSA_SLOT0_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT1_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT2_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT3_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT4_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT5_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT6_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT7_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT8_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT9_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT10_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT11_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT12_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT13_ALT
+ENUMX
+ BFD_RELOC_XTENSA_SLOT14_ALT
+ENUMDOC
+ Alternate Xtensa relocations. Only the slot is encoded in the
+ relocation. The meaning of these relocations is opcode-specific.
ENUM
BFD_RELOC_XTENSA_OP0
ENUMX
ENUMX
BFD_RELOC_XTENSA_OP2
ENUMDOC
- Generic Xtensa relocations. Only the operand number is encoded
- in the relocation. The details are determined by extracting the
- instruction opcode.
+ Xtensa relocations for backward compatibility. These have all been
+ replaced by BFD_RELOC_XTENSA_SLOT0_OP.
ENUM
BFD_RELOC_XTENSA_ASM_EXPAND
ENUMDOC
internally by the linker after analysis of a
BFD_RELOC_XTENSA_ASM_EXPAND.
+ENUM
+ BFD_RELOC_Z8K_DISP7
+ENUMDOC
+ DJNZ offset.
+ENUM
+ BFD_RELOC_Z8K_CALLR
+ENUMDOC
+ CALR offset.
+ENUM
+ BFD_RELOC_Z8K_IMM4L
+ENUMDOC
+ 4 bit value.
+
ENDSENUM
BFD_RELOC_UNUSED
CODE_FRAGMENT
bfd_boolean
bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
- struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
+ struct bfd_link_info *info ATTRIBUTE_UNUSED)
{
return TRUE;
}
break;
case bfd_reloc_overflow:
if (!((*link_info->callbacks->reloc_overflow)
- (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
+ (link_info, NULL,
+ bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
(*parent)->howto->name, (*parent)->addend,
input_bfd, input_section, (*parent)->address)))
goto error_return;
projects / deliverable / binutils-gdb.git / blobdiff