/* BFD support for handling relocation entries.
- Copyright (C) 1990-2019 Free Software Foundation, Inc.
+ Copyright (C) 1990-2020 Free Software Foundation, Inc.
Written by Cygnus Support.
This file is part of BFD, the Binary File Descriptor library.
return bfd_reloc_undefined;
/* Is the address of the relocation really within the section? */
- octets = reloc_entry->address * bfd_octets_per_byte (abfd);
+ octets = reloc_entry->address * bfd_octets_per_byte (abfd, input_section);
if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
return bfd_reloc_outofrange;
else
output_base = reloc_target_output_section->vma;
- relocation += output_base + symbol->section->output_offset;
+ output_base += symbol->section->output_offset;
+
+ /* If symbol addresses are in octets, convert to bytes. */
+ if (bfd_get_flavour (abfd) == bfd_target_elf_flavour
+ && (symbol->section->flags & SEC_ELF_OCTETS))
+ output_base *= bfd_octets_per_byte (abfd, input_section);
+
+ relocation += output_base;
/* Add in supplied addend. */
relocation += reloc_entry->addend;
it will have been checked in `bfd_perform_relocation already'. */
/* Is the address of the relocation really within the section? */
- octets = reloc_entry->address * bfd_octets_per_byte (abfd);
+ octets = reloc_entry->address * bfd_octets_per_byte (abfd, input_section);
if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
return bfd_reloc_outofrange;
else
output_base = reloc_target_output_section->vma;
- relocation += output_base + symbol->section->output_offset;
+ output_base += symbol->section->output_offset;
+
+ /* If symbol addresses are in octets, convert to bytes. */
+ if (bfd_get_flavour (abfd) == bfd_target_elf_flavour
+ && (symbol->section->flags & SEC_ELF_OCTETS))
+ output_base *= bfd_octets_per_byte (abfd, input_section);
+
+ relocation += output_base;
/* Add in supplied addend. */
relocation += reloc_entry->addend;
bfd_vma addend)
{
bfd_vma relocation;
- bfd_size_type octets = address * bfd_octets_per_byte (input_bfd);
+ bfd_size_type octets = (address
+ * bfd_octets_per_byte (input_bfd, input_section));
/* Sanity check the address. */
if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, octets))
}
return _bfd_relocate_contents (howto, input_bfd, relocation,
- contents
- + address * bfd_octets_per_byte (input_bfd));
+ contents + octets);
}
/* Relocate a given location using a given value and howto. */
Freescale S12Z reloc.
This is a 15 bit relative address. If the most significant bits are all zero
then it may be truncated to 8 bits.
-ENUM
- BFD_RELOC_16C_NUM08
-ENUMX
- BFD_RELOC_16C_NUM08_C
-ENUMX
- BFD_RELOC_16C_NUM16
-ENUMX
- BFD_RELOC_16C_NUM16_C
-ENUMX
- BFD_RELOC_16C_NUM32
-ENUMX
- BFD_RELOC_16C_NUM32_C
-ENUMX
- BFD_RELOC_16C_DISP04
-ENUMX
- BFD_RELOC_16C_DISP04_C
-ENUMX
- BFD_RELOC_16C_DISP08
-ENUMX
- BFD_RELOC_16C_DISP08_C
-ENUMX
- BFD_RELOC_16C_DISP16
-ENUMX
- BFD_RELOC_16C_DISP16_C
-ENUMX
- BFD_RELOC_16C_DISP24
-ENUMX
- BFD_RELOC_16C_DISP24_C
-ENUMX
- BFD_RELOC_16C_DISP24a
-ENUMX
- BFD_RELOC_16C_DISP24a_C
-ENUMX
- BFD_RELOC_16C_REG04
-ENUMX
- BFD_RELOC_16C_REG04_C
-ENUMX
- BFD_RELOC_16C_REG04a
-ENUMX
- BFD_RELOC_16C_REG04a_C
-ENUMX
- BFD_RELOC_16C_REG14
-ENUMX
- BFD_RELOC_16C_REG14_C
-ENUMX
- BFD_RELOC_16C_REG16
-ENUMX
- BFD_RELOC_16C_REG16_C
-ENUMX
- BFD_RELOC_16C_REG20
-ENUMX
- BFD_RELOC_16C_REG20_C
-ENUMX
- BFD_RELOC_16C_ABS20
-ENUMX
- BFD_RELOC_16C_ABS20_C
-ENUMX
- BFD_RELOC_16C_ABS24
-ENUMX
- BFD_RELOC_16C_ABS24_C
-ENUMX
- BFD_RELOC_16C_IMM04
-ENUMX
- BFD_RELOC_16C_IMM04_C
-ENUMX
- BFD_RELOC_16C_IMM16
-ENUMX
- BFD_RELOC_16C_IMM16_C
-ENUMX
- BFD_RELOC_16C_IMM20
-ENUMX
- BFD_RELOC_16C_IMM20_C
-ENUMX
- BFD_RELOC_16C_IMM24
-ENUMX
- BFD_RELOC_16C_IMM24_C
-ENUMX
- BFD_RELOC_16C_IMM32
-ENUMX
- BFD_RELOC_16C_IMM32_C
-ENUMDOC
- NS CR16C Relocations.
ENUM
BFD_RELOC_CR16_NUM8
ENUMX
BFD_RELOC_XTENSA_DIFF32
ENUMDOC
+ Xtensa relocations for backward compatibility. These have been replaced
+ by BFD_RELOC_XTENSA_PDIFF and BFD_RELOC_XTENSA_NDIFF.
Xtensa relocations to mark the difference of two local symbols.
These are only needed to support linker relaxation and can be ignored
when not relaxing. The field is set to the value of the difference
BFD_RELOC_XTENSA_TLS_CALL
ENUMDOC
Xtensa TLS relocations.
+ENUM
+ BFD_RELOC_XTENSA_PDIFF8
+ENUMX
+ BFD_RELOC_XTENSA_PDIFF16
+ENUMX
+ BFD_RELOC_XTENSA_PDIFF32
+ENUMX
+ BFD_RELOC_XTENSA_NDIFF8
+ENUMX
+ BFD_RELOC_XTENSA_NDIFF16
+ENUMX
+ BFD_RELOC_XTENSA_NDIFF32
+ENUMDOC
+ Xtensa relocations to mark the difference of two local symbols.
+ These are only needed to support linker relaxation and can be ignored
+ when not relaxing. The field is set to the value of the difference
+ assuming no relaxation. The relocation encodes the position of the
+ subtracted symbol so the linker can determine whether to adjust the field
+ value. PDIFF relocations are used for positive differences, NDIFF
+ relocations are used for negative differences. The difference value
+ is treated as unsigned with these relocation types, giving full
+ 8/16 value ranges.
ENUM
BFD_RELOC_Z80_DISP8
ENUMDOC
8 bit signed offset in (ix+d) or (iy+d).
+ENUM
+ BFD_RELOC_Z80_BYTE0
+ENUMDOC
+ First 8 bits of multibyte (32, 24 or 16 bit) value.
+ENUM
+ BFD_RELOC_Z80_BYTE1
+ENUMDOC
+ Second 8 bits of multibyte (32, 24 or 16 bit) value.
+ENUM
+ BFD_RELOC_Z80_BYTE2
+ENUMDOC
+ Third 8 bits of multibyte (32 or 24 bit) value.
+ENUM
+ BFD_RELOC_Z80_BYTE3
+ENUMDOC
+ Fourth 8 bits of multibyte (32 bit) value.
+ENUM
+ BFD_RELOC_Z80_WORD0
+ENUMDOC
+ Lowest 16 bits of multibyte (32 or 24 bit) value.
+ENUM
+ BFD_RELOC_Z80_WORD1
+ENUMDOC
+ Highest 16 bits of multibyte (32 or 24 bit) value.
+ENUM
+ BFD_RELOC_Z80_16_BE
+ENUMDOC
+ Like BFD_RELOC_16 but big-endian.
ENUM
BFD_RELOC_Z8K_DISP7
reloc_howto_type *
bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
{
- switch (code)
- {
- case BFD_RELOC_CTOR:
- /* The type of reloc used in a ctor, which will be as wide as the
- address - so either a 64, 32, or 16 bitter. */
- switch (bfd_arch_bits_per_address (abfd))
- {
- case 64:
- BFD_FAIL ();
- break;
- case 32:
- return &bfd_howto_32;
- case 16:
- BFD_FAIL ();
- break;
- default:
- BFD_FAIL ();
- }
- break;
- default:
- BFD_FAIL ();
- }
+ /* Very limited support is provided for relocs in generic targets
+ such as elf32-little. FIXME: Should we always return NULL? */
+ if (code == BFD_RELOC_CTOR
+ && bfd_arch_bits_per_address (abfd) == 32)
+ return &bfd_howto_32;
return NULL;
}
= HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
"unused", FALSE, 0, 0, FALSE);
- off = (*parent)->address * bfd_octets_per_byte (input_bfd);
+ off = ((*parent)->address
+ * bfd_octets_per_byte (input_bfd, input_section));
_bfd_clear_contents ((*parent)->howto, input_bfd,
input_section, data, off);
(*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
free (reloc_vector);
return data;
-error_return:
+ error_return:
free (reloc_vector);
return NULL;
}
projects / deliverable / binutils-gdb.git / blobdiff