@format
START-INFO-DIR-ENTRY
* Binutils: (binutils). The GNU binary utilities "ar", "objcopy",
- "objdump", "nm", "nlmconv", "size",
- "strings", "strip", and "ranlib".
+ "objdump", "nm", "nlmconv", "size", "readelf"
+ "strings", "strip", "ranlib" and "dlltool".
END-INFO-DIR-ENTRY
@end format
@end ifinfo
@ifinfo
-Copyright @copyright{} 1991, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
+Copyright @copyright{} 1991, 92, 93, 94, 95, 96, 97, 98, 1999 Free Software Foundation, Inc.
Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice
@synindex ky cp
@c
@c This file documents the GNU binary utilities "ar", "ld", "objcopy",
-@c "objdump", "nm", "size", "strings", "strip", and "ranlib".
+@c "objdump", "nm", "size", "strings", "strip", "readelf" and "ranlib".
@c
-@c Copyright (C) 1991, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
+@c Copyright (C) 1991, 92, 93, 94, 95, 96, 97, 98, 1999 Free Software Foundation, Inc.
@c
@c This text may be freely distributed under the terms of the GNU
@c General Public License.
@end tex
@vskip 0pt plus 1filll
-Copyright @copyright{} 1991, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
+Copyright @copyright{} 1991, 92, 93, 94, 95, 96, 97, 1998 Free Software Foundation, Inc.
Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice
@item ranlib
Generate index to archive contents
+@item readelf
+Display the contents of ELF format files.
+
@item size
List file section sizes and total size
@item windres
Manipulate Windows resources
+
+@item dlltool
+Create the files needed to build and use Dynamic Link Libraries
@end table
@end iftex
* objcopy:: Copy and translate object files
* objdump:: Display information from object files
* ranlib:: Generate index to archive contents
+* readelf:: Display the contents of ELF format files.
* size:: List section sizes and total size
* strings:: List printable strings from files
* strip:: Discard symbols
* addr2line:: Convert addresses to file and line
* nlmconv:: Converts object code into an NLM
* windres:: Manipulate Windows resources
+* dlltool:: Create files needed to build and use DLLs
* Selecting The Target System:: How these utilities determine the target.
* Reporting Bugs:: Reporting Bugs
* Index:: Index
index is not updated, even if it already existed; you can use @samp{ar s} or
@code{ranlib} explicitly to update the symbol table index.
-However, too many different system assume quick append rebuilds the
-index, so GNU ar treats @code{q} to same way its treats @code{r}.
+However, too many different systems assume quick append rebuilds the
+index, so GNU ar implements @code{q} as a synonym for @code{r}.
@item r
@cindex replacement in archive
flag either with any operation, or alone. Running @samp{ar s} on an
archive is equivalent to running @samp{ranlib} on it.
+@item S
+@cindex not writing archive index
+Do not generate an archive symbol table. This can speed up building a
+large library in several steps. The resulting archive can not be used
+with the linker. In order to build a symbol table, you must omit the
+@samp{S} modifier on the last execution of @samp{ar}, or you must run
+@samp{ranlib} on the archive.
+
@item u
@cindex updating an archive
Normally, @samp{ar r}@dots{} inserts all files
Requires prior use of @code{OPEN} or @code{CREATE}.
@item CLEAR
-Discard the contents of the current archive, cancelling the effect of
+Discard the contents of the current archive, canceling the effect of
any operations since the last @code{SAVE}. May be executed (with no
effect) even if no current archive is specified.
@item LIST
Display full contents of the current archive, in ``verbose'' style
regardless of the state of @code{VERBOSE}. The effect is like @samp{ar
-tv @var{archive}}). (This single command is a @sc{gnu} @code{ld}
+tv @var{archive}}. (This single command is a @sc{gnu} @code{ar}
enhancement, rather than present for MRI compatibility.)
Requires prior use of @code{OPEN} or @code{CREATE}.
[ -S | --strip-all ] [ -g | --strip-debug ]
[ -K @var{symbolname} | --keep-symbol=@var{symbolname} ]
[ -N @var{symbolname} | --strip-symbol=@var{symbolname} ]
- [ -P @var{symbolname} | --privatize-symbol=@var{symbolname} ]
+ [ -L @var{symbolname} | --localize-symbol=@var{symbolname} ]
[ -W @var{symbolname} | --weaken-symbol=@var{symbolname} ]
[ -x | --discard-all ] [ -X | --discard-locals ]
[ -b @var{byte} | --byte=@var{byte} ]
[ -i @var{interleave} | --interleave=@var{interleave} ]
+ [ -j @var{sectionname} | --only-section=@var{sectionname} ]
[ -R @var{sectionname} | --remove-section=@var{sectionname} ]
[ -p | --preserve-dates ] [ --debugging ]
[ --gap-fill=@var{val} ] [ --pad-to=@var{address} ]
[ --set-start=@var{val} ] [ --adjust-start=@var{incr} ]
- [ --adjust-vma=@var{incr} ]
- [ --adjust-section-vma=@var{section}@{=,+,-@}@var{val} ]
- [ --adjust-warnings ] [ --no-adjust-warnings ]
+ [ --change-addresses=@var{incr} ]
+ [ --change-section-address=@var{section}@{=,+,-@}@var{val} ]
+ [ --change-section-lma=@var{section}@{=,+,-@}@var{val} ]
+ [ --change-section-vma=@var{section}@{=,+,-@}@var{val} ]
+ [ --change-warnings ] [ --no-change-warnings ]
[ --set-section-flags=@var{section}=@var{flags} ]
[ --add-section=@var{sectionname}=@var{filename} ]
[ --change-leading-char ] [ --remove-leading-char ]
file; i.e., simply transfer data from source to destination with no
translation. @xref{Target Selection}, for more information.
+@item -j @var{sectionname}
+@itemx --only-section=@var{sectionname}
+Copy only the named section from the input file to the output file.
+This option may be given more than once. Note that using this option
+inappropriately may make the output file unusable.
+
@item -R @var{sectionname}
@itemx --remove-section=@var{sectionname}
Remove any section named @var{sectionname} from the output file. This
Do not copy symbol @var{symbolname} from the source file. This option
may be given more than once.
-@item -P @var{symbolname}
-@itemx --privatize-symbol=@var{symbolname}
+@item -L @var{symbolname}
+@itemx --localize-symbol=@var{symbolname}
Make symbol @var{symbolname} local to the file, so that it is not
visible externally. This option may be given more than once.
conversion process can be time consuming.
@item --gap-fill @var{val}
-Fill gaps between sections with @var{val}. This is done by increasing
+Fill gaps between sections with @var{val}. This operation applies to
+the @emph{load address} (LMA) of the sections. It is done by increasing
the size of the section with the lower address, and filling in the extra
space created with @var{val}.
@item --pad-to @var{address}
-Pad the output file up to the virtual address @var{address}. This is
+Pad the output file up to the load address @var{address}. This is
done by increasing the size of the last section. The extra space is
filled in with the value specified by @samp{--gap-fill} (default zero).
Set the address of the new file to @var{val}. Not all object file
formats support setting the start address.
-@item --adjust-start @var{incr}
-Adjust the start address by adding @var{incr}. Not all object file
+@item --change-start @var{incr}
+@itemx --adjust-start @var{incr}
+@cindex changing start address
+Change the start address by adding @var{incr}. Not all object file
formats support setting the start address.
-@item --adjust-vma @var{incr}
-Adjust the address of all sections, as well as the start address, by
-adding @var{incr}. Some object file formats do not permit section
-addresses to be changed arbitrarily. Note that this does not relocate
-the sections; if the program expects sections to be loaded at a certain
-address, and this option is used to change the sections such that they
-are loaded at a different address, the program may fail.
-
-@item --adjust-section-vma @var{section}@{=,+,-@}@var{val}
-Set or adjust the address of the named @var{section}. If @samp{=} is
-used, the section address is set to @var{val}. Otherwise, @var{val} is
-added to or subtracted from the section address. See the comments under
-@samp{--adjust-vma}, above. If @var{section} does not exist in the
-input file, a warning will be issued, unless @samp{--no-adjust-warnings}
-is used.
-
-@item --adjust-warnings
-If @samp{--adjust-section-vma} is used, and the named section does not
-exist, issue a warning. This is the default.
-
-@item --no-adjust-warnings
-Do not issue a warning if @samp{--adjust-section-vma} is used, even if
-the named section does not exist.
+@item --change-addresses @var{incr}
+@itemx --adjust-vma @var{incr}
+@cindex changing object addresses
+Change the VMA and LMA addresses of all sections, as well as the start
+address, by adding @var{incr}. Some object file formats do not permit
+section addresses to be changed arbitrarily. Note that this does not
+relocate the sections; if the program expects sections to be loaded at a
+certain address, and this option is used to change the sections such
+that they are loaded at a different address, the program may fail.
+
+@item --change-section-address @var{section}@{=,+,-@}@var{val}
+@itemx --adjust-section-vma @var{section}@{=,+,-@}@var{val}
+@cindex changing section address
+Set or change both the VMA address and the LMA address of the named
+@var{section}. If @samp{=} is used, the section address is set to
+@var{val}. Otherwise, @var{val} is added to or subtracted from the
+section address. See the comments under @samp{--change-addresses},
+above. If @var{section} does not exist in the input file, a warning will
+be issued, unless @samp{--no-change-warnings} is used.
+
+@item --change-section-lma @var{section}@{=,+,-@}@var{val}
+@cindex changing section LMA
+Set or change the LMA address of the named @var{section}. The LMA
+address is the address where the section will be loaded into memory at
+program load time. Normally this is the same as the VMA address, which
+is the address of the section at program run time, but on some systems,
+especially those where a program is held in ROM, the two can be
+different. If @samp{=} is used, the section address is set to
+@var{val}. Otherwise, @var{val} is added to or subtracted from the
+section address. See the comments under @samp{--change-addresses},
+above. If @var{section} does not exist in the input file, a warning
+will be issued, unless @samp{--no-change-warnings} is used.
+
+@item --change-section-vma @var{section}@{=,+,-@}@var{val}
+@cindex changing section VMA
+Set or change the VMA address of the named @var{section}. The VMA
+address is the address where the section will be located once the
+program has started executing. Normally this is the same as the LMA
+address, which is the address where the section will be loaded into
+memory, but on some systems, especially those where a program is held in
+ROM, the two can be different. If @samp{=} is used, the section address
+is set to @var{val}. Otherwise, @var{val} is added to or subtracted
+from the section address. See the comments under
+@samp{--change-addresses}, above. If @var{section} does not exist in
+the input file, a warning will be issued, unless
+@samp{--no-change-warnings} is used.
+
+@item --change-warnings
+@itemx --adjust-warnings
+If @samp{--change-section-address} or @samp{--change-section-lma} or
+@samp{--change-section-vma} is used, and the named section does not
+exist, issue a warning. This is the default.
+
+@item --no-change-warnings
+@itemx --no-adjust-warnings
+Do not issue a warning if @samp{--change-section-address} or
+@samp{--adjust-section-lma} or @samp{--adjust-section-vma} is used, even
+if the named section does not exist.
@item --set-section-flags @var{section}=@var{flags}
Set the flags for the named section. The @var{flags} argument is a
comma separated string of flag names. The recognized names are
-@samp{alloc}, @samp{load}, @samp{readonly}, @samp{code}, @samp{data},
-and @samp{rom}. Not all flags are meaningful for all object file
-formats.
+@samp{alloc}, @samp{contents}, @samp{load}, @samp{readonly},
+@samp{code}, @samp{data}, and @samp{rom}. You can set the
+@samp{contents} flag for a section which does not have contents, but it
+is not meaningful to clear the @samp{contents} flag of a section which
+does have contents--just remove the section instead. Not all flags are
+meaningful for all object file formats.
@item --add-section @var{sectionname}=@var{filename}
Add a new section named @var{sectionname} while copying the file. The
[ -j @var{section} | --section=@var{section} ]
[ -l | --line-numbers ] [ -S | --source ]
[ -m @var{machine} | --architecture=@var{machine} ]
+ [ -M @var{options} | --disassembler-options=@var{options}]
+ [ -p | --private-headers ]
[ -r | --reloc ] [ -R | --dynamic-reloc ]
[ -s | --full-contents ] [ --stabs ]
[ -t | --syms ] [ -T | --dynamic-syms ] [ -x | --all-headers ]
@cindex architecture
@cindex disassembly architecture
Specify the architecture to use when disassembling object files. This
-can be useful when disasembling object files which do not describe
+can be useful when disassembling object files which do not describe
architecture information, such as S-records. You can list the available
architectures with the @samp{-i} option.
+@item -M @var{options}
+@itemx --disassembler-options=@var{options}
+Pass target specific information to the disassembler. Only supported on
+some targets.
+
+If the target is an ARM architecture then this switch can be used to
+select which register name set is used during disassembler. Specifying
+@samp{--disassembler-options=reg-name-std} (the default) will select the
+register names as used in ARM's instruction set documentation, but with
+register 13 called 'sp', register 14 called 'lr' and register 15 called
+'pc'. Specifying @samp{--disassembler-options=reg-names-apcs} will
+select the name set used by the ARM Procedure Call Standard, whilst
+specifying @samp{--disassembler-options=reg-names-raw} will just use
+@samp{r} followed by the register number.
+
+@item -p
+@itemx --private-headers
+Print information that is specific to the object file format. The exact
+information printed depends upon the object file format. For some
+object file formats, no additional information is printed.
+
@item -r
@itemx --reloc
@cindex relocation entries, in object file
@samp{-a -f -h -r -t}.
@item -w
-@item --wide
+@itemx --wide
@cindex wide output, printing
Format some lines for output devices that have more than 80 columns.
@end table
@item --help
Print a summary of the program usage on the standard output and exit.
-@itemx -@var{min-len}
-@item -n @var{min-len}
+@item -@var{min-len}
+@itemx -n @var{min-len}
@itemx --bytes=@var{min-len}
Print sequences of characters that are at least @var{min-len} characters
long, instead of the default 4.
@cindex symbols, discarding
@smallexample
-strip [ -F @var{bfdname} | --target=@var{bfdname} | --target=@var{bfdname} ]
+strip [ -F @var{bfdname} | --target=@var{bfdname} ]
[ -I @var{bfdname} | --input-target=@var{bfdname} ]
[ -O @var{bfdname} | --output-target=@var{bfdname} ]
[ -s | --strip-all ] [ -S | -g | --strip-debug ]
@smallexample
c++filt [ -_ | --strip-underscores ]
+ [ -j | --java ]
[ -n | --no-strip-underscores ]
[ -s @var{format} | --format=@var{format} ]
[ --help ] [ --version ] [ @var{symbol}@dots{} ]
@end smallexample
-The C++ language provides function overloading, which means that you can
-write many functions with the same name (providing each takes parameters
-of different types). All C++ function names are encoded into a
-low-level assembly label (this process is known as
+The C++ and Java languages provides function overloading, which means
+that you can write many functions with the same name (providing each
+takes parameters of different types). All C++ and Java function names
+are encoded into a low-level assembly label (this process is known as
@dfn{mangling}). The @code{c++filt} program does the inverse mapping: it
decodes (@dfn{demangles}) low-level names into user-level names so that
the linker can keep these overloaded functions from clashing.
name @code{_foo}. This option removes the initial underscore. Whether
@code{c++filt} removes the underscore by default is target dependent.
+@item -j
+@itemx --java
+Prints demangled names using Java syntax. The default is to use C++
+syntax.
+
@item -n
@itemx --no-strip-underscores
Do not remove the initial underscore.
the one used by the Lucid compiler
@item arm
the one specified by the C++ Annotated Reference Manual
+@item hp
+the one used by the HP compiler
+@item edg
+the one used by the EDG compiler
@end table
@item --help
@item -l @var{linker}
@itemx --linker=@var{linker}
-Use @var{linker} for any linking. @var{linker} can be an abosolute or a
+Use @var{linker} for any linking. @var{linker} can be an absolute or a
relative pathname.
@item -h
option. @code{windres} will also search this directory when looking for
files named in the @code{rc} file.
-@item --define @var{sym[=val]}
+@item -D @var{target}
+@itemx --define @var{sym[=val]}
Specify a @code{-D} option to pass to the preprocessor when reading an
@code{rc} file.
+@item -v
+Enable verbose mode. This tells you what the preprocessor is if you
+didn't specify one.
+
@item --language @var{val}
Specify the default language to use when reading an @code{rc} file.
@var{val} should be a hexadecimal language code. The low eight bits are
this will turn on parser debugging.
@end table
+
+@node dlltool
+@chapter Create files needed to build and use DLLs
+@cindex DLL
+@kindex dlltool
+
+@code{dlltool} may be used to create the files needed to build and use
+dynamic link libraries (DLLs).
+
+@quotation
+@emph{Warning:} @code{dlltool} is not always built as part of the binary
+utilities, since it is only useful for those targets which support DLLs.
+@end quotation
+
+@smallexample
+dlltool [-d|--input-def @var{def-file-name}]
+ [-b|--base-file @var{base-file-name}]
+ [-e|--output-exp @var{exports-file-name}]
+ [-z|--output-def @var{def-file-name}]
+ [-l|--output-lib @var{library-file-name}]
+ [--export-all-symbols] [--no-export-all-symbols]
+ [--exclude-symbols @var{list}]
+ [--no-default-excludes]
+ [-S|--as @var{path-to-assembler}] [-f|--as-flags @var{options}]
+ [-D|--dllname @var{name}] [-m|--machine @var{machine}]
+ [-a|--add-indirect] [-U|--add-underscore] [-k|--kill-at]
+ [-A|--add-stdcall-alias]
+ [-x|--no-idata4] [-c|--no-idata5] [-i|--interwork]
+ [-n|--nodelete] [-v|--verbose] [-h|--help] [-V|--version]
+ [object-file @dots{}]
+@end smallexample
+
+@code{dlltool} reads its inputs, which can come from the @samp{-d} and
+@samp{-b} options as well as object files specified on the command
+line. It then processes these inputs and if the @samp{-e} option has
+been specified it creates a exports file. If the @samp{-l} option
+has been specified it creates a library file and if the @samp{-z} option
+has been specified it creates a def file. Any or all of the -e, -l
+and -z options can be present in one invocation of dlltool.
+
+When creating a DLL, along with the source for the DLL, it is necessary
+to have three other files. @code{dlltool} can help with the creation of
+these files.
+
+The first file is a @samp{.def} file which specifies which functions are
+exported from the DLL, which functions the DLL imports, and so on. This
+is a text file and can be created by hand, or @code{dlltool} can be used
+to create it using the @samp{-z} option. In this case @code{dlltool}
+will scan the object files specified on its command line looking for
+those functions which have been specially marked as being exported and
+put entries for them in the .def file it creates.
+
+In order to mark a function as being exported from a DLL, it needs to
+have an @samp{-export:<name_of_function>} entry in the @samp{.drectve}
+section of the object file. This can be done in C by using the
+asm() operator:
+
+@smallexample
+ asm (".section .drectve");
+ asm (".ascii \"-export:my_func\"");
+
+ int my_func (void) @{ @dots{} @}
+@end smallexample
+
+The second file needed for DLL creation is an exports file. This file
+is linked with the object files that make up the body of the DLL and it
+handles the interface between the DLL and the outside world. This is a
+binary file and it can be created by giving the @samp{-e} option to
+@code{dlltool} when it is creating or reading in a .def file.
+
+The third file needed for DLL creation is the library file that programs
+will link with in order to access the functions in the DLL. This file
+can be created by giving the @samp{-l} option to dlltool when it
+is creating or reading in a .def file.
+
+@code{dlltool} builds the library file by hand, but it builds the
+exports file by creating temporary files containing assembler statements
+and then assembling these. The @samp{-S} command line option can be
+used to specify the path to the assembler that dlltool will use,
+and the @samp{-f} option can be used to pass specific flags to that
+assembler. The @samp{-n} can be used to prevent dlltool from deleting
+these temporary assembler files when it is done, and if @samp{-n} is
+specified twice then this will prevent dlltool from deleting the
+temporary object files it used to build the library.
+
+Here is an example of creating a DLL from a source file @samp{dll.c} and
+also creating a program (from an object file called @samp{program.o})
+that uses that DLL:
+
+@smallexample
+ gcc -c dll.c
+ dlltool -e exports.o -l dll.lib dll.o
+ gcc dll.o exports.o -o dll.dll
+ gcc program.o dll.lib -o program
+@end smallexample
+
+The command line options have the following meanings:
+
+@table @code
+
+@item -d @var{filename}
+@itemx --input-def @var{filename}
+@cindex input .def file
+Specifies the name of a .def file to be read in and processed.
+
+@item -b @var{filename}
+@itemx --base-file @var{filename}
+@cindex base files
+Specifies the name of a base file to be read in and processed. The
+contents of this file will be added to the relocation section in the
+exports file generated by dlltool.
+
+@item -e @var{filename}
+@itemx --output-exp @var{filename}
+Specifies the name of the export file to be created by dlltool.
+
+@item -z @var{filename}
+@itemx --output-def @var{filename}
+Specifies the name of the .def file to be created by dlltool.
+
+@item -l @var{filename}
+@itemx --output-lib @var{filename}
+Specifies the name of the library file to be created by dlltool.
+
+@item --export-all-symbols
+Treat all global and weak defined symbols found in the input object
+files as symbols to be exported. There is a small list of symbols which
+are not exported by default; see the @code{--no-default-excludes}
+option. You may add to the list of symbols to not export by using the
+@code{--exclude-symbols} option.
+
+@item --no-export-all-symbols
+Only export symbols explicitly listed in an input .def file or in
+@samp{.drectve} sections in the input object files. This is the default
+behaviour. The @samp{.drectve} sections are created by @samp{dllexport}
+attributes in the source code.
+
+@item --exclude-symbols @var{list}
+Do not export the symbols in @var{list}. This is a list of symbol names
+separated by comma or colon characters. The symbol names should not
+contain a leading underscore. This is only meaningful when
+@code{--export-all-symbols} is used.
+
+@item --no-default-excludes
+When @code{--export-all-symbols} is used, it will by default avoid
+exporting certain special symbols. The current list of symbols to avoid
+exporting is @samp{DllMain@@12}, @samp{DllEntryPoint@@0},
+@samp{impure_ptr}. You may use the @code{--no-default-excludes} option
+to go ahead and export these special symbols. This is only meaningful
+when @code{--export-all-symbols} is used.
+
+@item -S @var{path}
+@itemx --as @var{path}
+Specifies the path, including the filename, of the assembler to be used
+to create the exports file.
+
+@item -f @var{switches}
+@itemx --as-flags @var{switches}
+Specifies any specific command line switches to be passed to the
+assembler when building the exports file. This option will work even if
+the @samp{-S} option is not used. This option only takes one argument,
+and if it occurs more than once on the command line, then later
+occurrences will override earlier occurrences. So if it is necessary to
+pass multiple switches to the assembler they should be enclosed in
+double quotes.
+
+@item -D @var{name}
+@itemx --dll-name @var{name}
+Specifies the name to be stored in the .def file as the name of the DLL
+when the @samp{-e} option is used. If this option is not present, then
+the filename given to the @samp{-e} option will be used as the name of
+the DLL.
+
+@item -m @var{machine}
+@itemx -machine @var{machine}
+Specifies the type of machine for which the library file should be
+built. @code{dlltool} has a built in default type, depending upon how
+it was created, but this option can be used to override that. This is
+normally only useful when creating DLLs for an ARM processor, when the
+contents of the DLL are actually encode using THUMB instructions.
+
+@item -a
+@itemx --add-indirect
+Specifies that when @code{dlltool} is creating the exports file it
+should add a section which allows the exported functions to be
+referenced without using the import library. Whatever the hell that
+means!
+
+@item -U
+@itemx --add-underscore
+Specifies that when @code{dlltool} is creating the exports file it
+should prepend an underscore to the names of the exported functions.
+
+@item -k
+@itemx --kill-at
+Specifies that when @code{dlltool} is creating the exports file it
+should not append the string @samp{@@ <number>}. These numbers are
+called ordinal numbers and they represent another way of accessing the
+function in a DLL, other than by name.
+
+@item -A
+@itemx --add-stdcall-alias
+Specifies that when @code{dlltool} is creating the exports file it
+should add aliases for stdcall symbols without @samp{@@ <number>}
+in addition to the symbols with @samp{@@ <number>}.
+
+@item -x
+@itemx --no-idata4
+Specifies that when @code{dlltool} is creating the exports and library
+files it should omit the .idata4 section. This is for compatibility
+with certain operating systems.
+
+@item -c
+@itemx --no-idata5
+Specifies that when @code{dlltool} is creating the exports and library
+files it should omit the .idata5 section. This is for compatibility
+with certain operating systems.
+
+@item -i
+@itemx --interwork
+Specifies that @code{dlltool} should mark the objects in the library
+file and exports file that it produces as supporting interworking
+between ARM and THUMB code.
+
+@item -n
+@itemx --nodelete
+Makes @code{dlltool} preserve the temporary assembler files it used to
+create the exports file. If this option is repeated then dlltool will
+also preserve the temporary object files it uses to create the library
+file.
+
+@item -v
+@itemx --verbose
+Make dlltool describe what it is doing.
+
+@item -h
+@itemx --help
+Displays a list of command line options and then exits.
+
+@item -V
+@itemx --version
+Displays dlltool's version number and then exits.
+
+@end table
+
+@node readelf
+@chapter readelf
+
+@cindex ELF file information
+@kindex readelf
+
+@smallexample
+readelf [ -a | --all ]
+ [ -h | --file-header]
+ [ -l | --program-headers | --segments]
+ [ -S | --section-headers | --sections]
+ [ -e | --headers]
+ [ -s | --syms | --symbols]
+ [ -r | --relocs]
+ [ -d | --dynamic]
+ [ -V | --version-info]
+ [ -D | --use-dynamic]
+ [ -x <number> | --hex-dump=<number>]
+ [ -w[liapr] | --debug-dump[=info,=line,=abbrev,=pubnames,=ranges]]
+ [ --histogram]
+ [ -v | --version]
+ [ -H | --help]
+ @var{elffile}@dots{}
+@end smallexample
+
+@code{readelf} displays information about one or more ELF format object
+files. The options control what particular information to display.
+
+@var{elffile}@dots{} are the object files to be examined. At the
+moment, @code{readelf} does not support examining archives, nor does it
+support examing 64 bit ELF files.
+
+The long and short forms of options, shown here as alternatives, are
+equivalent. At least one option besides @samp{-v} or @samp{-H} must be
+given.
+
+@table @code
+@item -a
+@itemx --all
+Equivalent to specifiying @samp{--file-header},
+@samp{--program-headers}, @samp{--sections}, @samp{--symbols},
+@samp{--relocs}, @samp{--dynamic} and @samp{--version-info}.
+
+@item -h
+@itemx --file-header
+@cindex ELF file header information
+Displays the information contained in the ELF header at the start of the
+file.
+
+@item -l
+@itemx --program-headers
+@itemx --segments
+@cindex ELF program header information
+@cindex ELF segment information
+Displays the information contained in the file's segment headers, if it
+has any.
+
+@item -S
+@itemx --sections
+@itemx --section-headers
+@cindex ELF section information
+Displays the information contained in the file's section headers, if it
+has any.
+
+@item -s
+@itemx --symbols
+@itemx --syms
+@cindex ELF symbol table information
+Displays the entries in symbol table section of the file, if it has one.
+
+@item -e
+@itemx --headers
+Display all the headers in the file. Equivalent to @samp{-h -l -S}.
+
+@item -r
+@itemx --relocs
+@cindex ELF reloc information
+Displays the contents of the file's relocation section, if it ha one.
+
+@item -d
+@itemx --dynamic
+@cindex ELF dynamic section information
+Displays the contents of the file's dynamic section, if it has one.
+
+@item -V
+@itemx --version-info
+@cindex ELF version sections informations
+Displays the contents of the version sections in the file, it they
+exist.
+
+@item -D
+@itemx --use-dynamic
+When displaying symbols, this option makes @code{readelf} use the
+symblol table in the file's dynamic section, rather than the one in the
+symbols section.
+
+@item -x <number>
+@itemx --hex-dump=<number>
+Displays the contents of the indicated section as a hexadecimal dump.
+
+@item -w[liapr]
+@itemx --debug-dump[=line,=info,=abbrev,=pubnames,=ranges]
+Displays the contents of the debug sections in the file, if any are
+present. If one of the optional letters or words follows the switch
+then only data found in those specific sections will be dumped.
+
+@item --histogram
+Display a histogram of bucket list lengths when displaying the contents
+of the symbol tables.
+
+@item -v
+@itemx --version
+Display the version number of readelf.
+
+@item -H
+@itemx --help
+Display the command line options understood by @code{readelf}.
+
+@end table
+
+
@node Selecting The Target System
@chapter Selecting the target system
distribution.
In any event, we also recommend that you send bug reports for the binary
-utilities to @samp{bug-gnu-utils@@prep.ai.mit.edu}.
+utilities to @samp{bug-gnu-utils@@gnu.org}.
The fundamental principle of reporting bugs usefully is this:
@strong{report all the facts}. If you are not sure whether to state a