# Test compressed .debug section.
-if { [is_remote host] || ![is_elf_format] || ![is_zlib_supported] } then {
+if { [is_remote host] || ![is_elf_format] } then {
return
}
return
}
-set got [remote_exec host "cmp ${testfile}.o ${compressedfile}.o" "" "/dev/null"]
+if { ![binutils_assemble_flags $srcdir/$subdir/dw2-1.S ${compressedfile}gnu.o --compress-debug-sections=zlib-gnu] } then {
+ unsupported "compressed debug sections with zlib-gnu"
+ return
+}
+
+set got [remote_exec host "cmp ${testfile}.o ${compressedfile}gnu.o"]
# Use it to set up xfail.
set exec_output [lindex $got 1]
if [string match "" $exec_output] then {
# Xfail this test if there are no compressed sections.
setup_xfail "$compression_used$target_triplet"
-set testname "objcopy compress debug sections in archive"
-set got [binutils_run $OBJCOPY "--compress-debug-sections ${copyfile}.a ${compressedcopyfile}.a"]
+set testname "objcopy compress debug sections in archive with zlib-gnu"
+set got [binutils_run $OBJCOPY "--compress-debug-sections=zlib-gnu ${copyfile}.a ${compressedcopyfile}.a"]
if ![string match "" $got] then {
fail "objcopy ($testname)"
} else {
}
run_dump_test "debug_str"
+
+if { ![binutils_assemble_flags $srcdir/$subdir/dw2-1.S ${compressedfile}gabi.o --compress-debug-sections=zlib-gabi] } then {
+ fail "compressed debug sections with zlib-gabi"
+ return
+}
+
+if { ![binutils_assemble_flags $srcdir/$subdir/dw2-1.S ${compressedfile}gnu.o --compress-debug-sections=zlib-gnu] } then {
+ fail "compressed debug sections with zlib-gnu"
+ return
+}
+
+set src1 ${compressedfile}gabi.o
+set src2 ${compressedfile}.o
+set status [remote_exec build cmp "${src1} ${src2}"]
+set exec_output [lindex $status 1]
+set exec_output [prune_warnings $exec_output]
+if ![string match "" $exec_output] then {
+ fail "compressed debug sections with zlib-gabi"
+ return
+}
+
+if { ![binutils_assemble_flags $srcdir/$subdir/dw2-2.S ${compressedfile2}gabi.o --compress-debug-sections=zlib-gabi] } then {
+ fail "compressed debug sections with zlib-gabi"
+ return
+}
+
+if { ![binutils_assemble_flags $srcdir/$subdir/dw2-2.S ${compressedfile2}gnu.o --compress-debug-sections=zlib-gnu] } then {
+ fail "compressed debug sections with zlib-gnu"
+ return
+}
+
+set src1 ${compressedfile2}gabi.o
+set src2 ${compressedfile2}.o
+set status [remote_exec build cmp "${src1} ${src2}"]
+set exec_output [lindex $status 1]
+set exec_output [prune_warnings $exec_output]
+if ![string match "" $exec_output] then {
+ fail "compressed debug sections with zlib-gabi"
+ return
+}
+
+if { ![binutils_assemble_flags $srcdir/$subdir/dw2-3.S ${compressedfile3}gabi.o --compress-debug-sections=zlib-gabi] } then {
+ fail "compressed debug sections with zlib-gabi"
+ return
+}
+
+set testname "readelf -t zlib-gabi compress debug sections"
+set got [remote_exec host "$READELF -t --wide ${compressedfile3}gabi.o" "" "/dev/null" "tmpdir/dw2-3.rt"]
+if { [lindex $got 0] != 0 || ![string match "" [lindex $got 1]] } then {
+ fail "$testname (reason: unexpected output)"
+ send_log "$got\n"
+}
+if { [regexp_diff tmpdir/dw2-3.rt $srcdir/$subdir/dw2-3.rt] } then {
+ fail "$testname"
+} else {
+ pass "$testname"
+}
+
+set testname "readelf -S zlib-gabi compress debug sections"
+set got [remote_exec host "$READELF -S --wide ${compressedfile3}gabi.o" "" "/dev/null" "tmpdir/dw2-3.rS"]
+if { [lindex $got 0] != 0 || ![string match "" [lindex $got 1]] } then {
+ fail "$testname (reason: unexpected output)"
+ send_log "$got\n"
+}
+if { [regexp_diff tmpdir/dw2-3.rS $srcdir/$subdir/dw2-3.rS] } then {
+ fail "$testname"
+} else {
+ pass "$testname"
+}
+
+if { ![binutils_assemble_flags $srcdir/$subdir/dw2-3.S ${compressedfile3}gnu.o --compress-debug-sections=zlib-gnu] } then {
+ fail "compressed debug sections with zlib-gnu"
+ return
+}
+
+set src1 ${compressedfile3}gabi.o
+set src2 ${compressedfile3}.o
+set status [remote_exec build cmp "${src1} ${src2}"]
+set exec_output [lindex $status 1]
+set exec_output [prune_warnings $exec_output]
+if ![string match "" $exec_output] then {
+ fail "compressed debug sections with zlib-gabi"
+ return
+}
+
+remote_file host delete ${libfile}gabi.a
+set got [binutils_run $AR "rc ${libfile}gabi.a ${compressedfile}gabi.o ${compressedfile2}gabi.o ${compressedfile3}gabi.o"]
+if ![string match "" $got] then {
+ fail "compressed debug sections"
+ return
+}
+
+set testname "objcopy compress debug sections with zlib-gabi"
+set got [binutils_run $OBJCOPY "--compress-debug-sections=zlib-gabi ${testfile}.o ${copyfile}gabi.o"]
+if ![string match "" $got] then {
+ fail "objcopy ($testname)"
+ return
+}
+send_log "cmp ${compressedfile}gabi.o ${copyfile}gabi.o\n"
+verbose "cmp ${compressedfile}gabi.o ${copyfile}gabi.o"
+set src1 ${compressedfile}gabi.o
+set src2 ${copyfile}gabi.o
+set status [remote_exec build cmp "${src1} ${src2}"]
+set exec_output [lindex $status 1]
+set exec_output [prune_warnings $exec_output]
+if ![string match "" $exec_output] then {
+ send_log "$exec_output\n"
+ verbose "$exec_output" 1
+ fail "objcopy ($testname)"
+} else {
+ pass "objcopy ($testname)"
+}
+
+set testname "objcopy decompress compressed debug sections with zlib-gabi"
+set got [binutils_run $OBJCOPY "--decompress-debug-sections ${compressedfile}gabi.o ${copyfile}gabi.o"]
+if ![string match "" $got] then {
+ fail "objcopy ($testname)"
+ return
+}
+send_log "cmp ${testfile}.o ${copyfile}gabi.o\n"
+verbose "cmp ${testfile}.o ${copyfile}gabi.o"
+set src1 ${testfile}.o
+set src2 ${copyfile}gabi.o
+set status [remote_exec build cmp "${src1} ${src2}"]
+set exec_output [lindex $status 1]
+set exec_output [prune_warnings $exec_output]
+if ![string match "" $exec_output] then {
+ send_log "$exec_output\n"
+ verbose "$exec_output" 1
+ fail "objcopy ($testname)"
+} else {
+ pass "objcopy ($testname)"
+}
+
+set testname "objcopy zlib-gnu compress debug sections with zlib-gabi"
+set got [binutils_run $OBJCOPY "--compress-debug-sections=zlib-gabi ${compressedfile}.o ${copyfile}gabi.o"]
+if ![string match "" $got] then {
+ fail "objcopy ($testname)"
+ return
+}
+send_log "cmp ${compressedfile}gabi.o ${copyfile}gabi.o\n"
+verbose "cmp ${compressedfile}gabi.o ${copyfile}gabi.o"
+set src1 ${compressedfile}gabi.o
+set src2 ${copyfile}gabi.o
+set status [remote_exec build cmp "${src1} ${src2}"]
+set exec_output [lindex $status 1]
+set exec_output [prune_warnings $exec_output]
+if ![string match "" $exec_output] then {
+ send_log "$exec_output\n"
+ verbose "$exec_output" 1
+ fail "objcopy ($testname)"
+} else {
+ pass "objcopy ($testname)"
+}
+
+set testname "objcopy zlib-gabi compress debug sections with zlib-gnu"
+set got [binutils_run $OBJCOPY "--compress-debug-sections=zlib-gnu ${compressedfile}gabi.o ${copyfile}gnu.o"]
+if ![string match "" $got] then {
+ fail "objcopy ($testname)"
+ return
+}
+send_log "cmp ${compressedfile}gnu.o ${copyfile}gnu.o\n"
+verbose "cmp ${compressedfile}gnu.o ${copyfile}gnu.o"
+set src1 ${compressedfile}gnu.o
+set src2 ${copyfile}gnu.o
+set status [remote_exec build cmp "${src1} ${src2}"]
+set exec_output [lindex $status 1]
+set exec_output [prune_warnings $exec_output]
+if ![string match "" $exec_output] then {
+ send_log "$exec_output\n"
+ verbose "$exec_output" 1
+ fail "objcopy ($testname)"
+} else {
+ pass "objcopy ($testname)"
+}
+
+set testname "objcopy compress debug sections 3 with zlib-gabi"
+set got [binutils_run $OBJCOPY "--compress-debug-sections=zlib-gabi ${testfile3}.o ${copyfile}gabi.o"]
+if ![string match "" $got] then {
+ fail "objcopy ($testname)"
+ return
+}
+send_log "cmp ${compressedfile3}gabi.o ${copyfile}gabi.o\n"
+verbose "cmp ${compressedfile3}gabi.o ${copyfile}gabi.o"
+set src1 ${compressedfile3}gabi.o
+set src2 ${copyfile}gabi.o
+set status [remote_exec build cmp "${src1} ${src2}"]
+set exec_output [lindex $status 1]
+set exec_output [prune_warnings $exec_output]
+if ![string match "" $exec_output] then {
+ send_log "$exec_output\n"
+ verbose "$exec_output" 1
+ fail "objcopy ($testname)"
+} else {
+ pass "objcopy ($testname)"
+}
+
+set testname "objcopy decompress compressed debug sections 3 with zlib-gabi"
+set got [binutils_run $OBJCOPY "--decompress-debug-sections ${compressedfile3}gabi.o ${copyfile}gabi.o"]
+if ![string match "" $got] then {
+ fail "objcopy ($testname)"
+ return
+}
+send_log "cmp ${testfile3}.o ${copyfile}gabi.o\n"
+verbose "cmp ${testfile3}.o ${copyfile}gabi.o"
+set src1 ${testfile3}.o
+set src2 ${copyfile}gabi.o
+set status [remote_exec build cmp "${src1} ${src2}"]
+set exec_output [lindex $status 1]
+set exec_output [prune_warnings $exec_output]
+if ![string match "" $exec_output] then {
+ send_log "$exec_output\n"
+ verbose "$exec_output" 1
+ fail "objcopy ($testname)"
+} else {
+ pass "objcopy ($testname)"
+}
+
+set testname "objcopy zlib-gnu compress debug sections 3 with zlib-gabi"
+set got [binutils_run $OBJCOPY "--compress-debug-sections=zlib-gabi ${compressedfile3}.o ${copyfile}gabi.o"]
+if ![string match "" $got] then {
+ fail "objcopy ($testname)"
+ return
+}
+send_log "cmp ${compressedfile3}gabi.o ${copyfile}gabi.o\n"
+verbose "cmp ${compressedfile3}gabi.o ${copyfile}gabi.o"
+set src1 ${compressedfile3}gabi.o
+set src2 ${copyfile}gabi.o
+set status [remote_exec build cmp "${src1} ${src2}"]
+set exec_output [lindex $status 1]
+set exec_output [prune_warnings $exec_output]
+if ![string match "" $exec_output] then {
+ send_log "$exec_output\n"
+ verbose "$exec_output" 1
+ fail "objcopy ($testname)"
+} else {
+ pass "objcopy ($testname)"
+}
+
+set testname "objcopy zlib-gabi compress debug sections 3 with zlib-gnu"
+set got [binutils_run $OBJCOPY "--compress-debug-sections=zlib-gnu ${compressedfile3}gabi.o ${copyfile}gnu.o"]
+if ![string match "" $got] then {
+ fail "objcopy ($testname)"
+ return
+}
+send_log "cmp ${compressedfile3}gnu.o ${copyfile}gnu.o\n"
+verbose "cmp ${compressedfile3}gnu.o ${copyfile}gnu.o"
+set src1 ${compressedfile3}gnu.o
+set src2 ${copyfile}gnu.o
+set status [remote_exec build cmp "${src1} ${src2}"]
+set exec_output [lindex $status 1]
+set exec_output [prune_warnings $exec_output]
+if ![string match "" $exec_output] then {
+ send_log "$exec_output\n"
+ verbose "$exec_output" 1
+ fail "objcopy ($testname)"
+} else {
+ pass "objcopy ($testname)"
+}
+
+set testname "objcopy zlib-gnu compress debug sections 3"
+set got [binutils_run $OBJCOPY "${compressedfile3}gnu.o ${copyfile}gnu.o"]
+if ![string match "" $got] then {
+ fail "objcopy ($testname)"
+ return
+}
+send_log "cmp ${compressedfile3}gnu.o ${copyfile}gnu.o\n"
+verbose "cmp ${compressedfile3}gnu.o ${copyfile}gnu.o"
+set src1 ${compressedfile3}gnu.o
+set src2 ${copyfile}gnu.o
+set status [remote_exec build cmp "${src1} ${src2}"]
+set exec_output [lindex $status 1]
+set exec_output [prune_warnings $exec_output]
+if ![string match "" $exec_output] then {
+ send_log "$exec_output\n"
+ verbose "$exec_output" 1
+ fail "objcopy ($testname)"
+} else {
+ pass "objcopy ($testname)"
+}
+
+set testname "objcopy zlib-gnu compress debug sections 3"
+set got [binutils_run $OBJCOPY "${compressedfile3}gnu.o ${copyfile}gnu.o"]
+if ![string match "" $got] then {
+ fail "objcopy ($testname)"
+ return
+}
+send_log "cmp ${compressedfile3}gnu.o ${copyfile}gnu.o\n"
+verbose "cmp ${compressedfile3}gnu.o ${copyfile}gnu.o"
+set src1 ${compressedfile3}gnu.o
+set src2 ${copyfile}gnu.o
+set status [remote_exec build cmp "${src1} ${src2}"]
+set exec_output [lindex $status 1]
+set exec_output [prune_warnings $exec_output]
+if ![string match "" $exec_output] then {
+ send_log "$exec_output\n"
+ verbose "$exec_output" 1
+ fail "objcopy ($testname)"
+} else {
+ pass "objcopy ($testname)"
+}
+
+set testname "objcopy decompress debug sections in archive with zlib-gabi"
+set got [binutils_run $OBJCOPY "--decompress-debug-sections ${libfile}gabi.a ${copyfile}gabi.a"]
+if ![string match "" $got] then {
+ fail "objcopy ($testname)"
+} else {
+ set got [remote_exec host "$READELF -S --wide ${copyfile}gabi.a" "" "/dev/null" "tmpdir/libdw2.out"]
+
+ if { [lindex $got 0] != 0 || ![string match "" [lindex $got 1]] } then {
+ fail "$testname (reason: unexpected output)"
+ send_log $got
+ send_log "\n"
+ }
+
+ if { [regexp_diff tmpdir/libdw2.out $srcdir/$subdir/libdw2.out] } then {
+ fail "$testname"
+ } else {
+ pass "$testname"
+ }
+}
+
+set testname "objcopy compress debug sections in archive with zlib-gabi"
+set got [binutils_run $OBJCOPY "--compress-debug-sections=zlib-gabi ${copyfile}gabi.a ${compressedcopyfile}gabi.a"]
+if ![string match "" $got] then {
+ fail "objcopy ($testname)"
+} else {
+ set got [remote_exec host "$OBJDUMP -W ${compressedcopyfile}gabi.a" "" "/dev/null" "tmpdir/libdw2-compressedgabi.out"]
+
+ if { [lindex $got 0] != 0 || ![string match "" [lindex $got 1]] } then {
+ fail "$testname (reason: unexpected output)"
+ send_log $got
+ send_log "\n"
+ }
+
+ if { [regexp_diff tmpdir/libdw2-compressedgabi.out $srcdir/$subdir/libdw2-compressedgabi.out] } then {
+ fail "$testname"
+ } else {
+ pass "$testname"
+ }
+}
+
+set testname "objdump compress debug sections 3 with zlib-gabi"
+set got [remote_exec host "$OBJDUMP -W ${compressedfile3}gabi.o" "" "/dev/null" "objdump.out"]
+if { [lindex $got 0] != 0 || ![string match "" [lindex $got 1]] } then {
+ fail "$testname"
+ send_log "$got\n"
+}
+if { [regexp_diff objdump.out $srcdir/$subdir/dw2-3gabi.W] } then {
+ fail "$testname"
+} else {
+ pass "$testname"
+}
+
+proc convert_test { testname as_flags objcop_flags } {
+ global srcdir
+ global subdir
+ global testfile3
+ global copyfile
+ global OBJCOPY
+ global OBJDUMP
+
+ if { ![binutils_assemble_flags $srcdir/$subdir/dw2-3.S ${testfile3}.o "$as_flags"] } then {
+ unresolved "$testname"
+ return
+ }
+
+ set got [binutils_run $OBJCOPY "$objcop_flags ${testfile3}.o ${copyfile}.o"]
+ if ![string match "" $got] then {
+ fail "objcopy ($testname)"
+ return
+ }
+
+ set got [remote_exec host "$OBJDUMP -W ${copyfile}.o" "" "/dev/null" "objdump.out"]
+
+ if { [lindex $got 0] != 0 || ![string match "" [lindex $got 1]] } then {
+ fail "$testname (reason: unexpected output)"
+ send_log $got
+ send_log "\n"
+ return
+ }
+
+ if { [regexp_diff objdump.out $srcdir/$subdir/dw2-3.W] } then {
+ fail "$testname"
+ } else {
+ pass "$testname"
+ }
+}
+
+if { ([istarget "x86_64-*-elf*"]
+ || [istarget "x86_64-*-linux*"]) } {
+ set testname "Convert x86-64 object with zlib-gabi to x32 (1)"
+ convert_test "$testname" "--compress-debug-sections=zlib-gabi --64" "-O elf32-x86-64"
+
+ set testname "Convert x86-64 object with zlib-gabi to x32 (2)"
+ convert_test "$testname" "--compress-debug-sections=zlib-gabi --64" "-O elf32-x86-64 --compress-debug-sections=zlib-gnu"
+
+ set testname "Convert x86-64 object with zlib-gabi to x32 (3)"
+ convert_test "$testname" "--compress-debug-sections=zlib-gabi --64" "-O elf32-x86-64 --decompress-debug-sections"
+
+ set testname "Convert x86-64 object with zlib-gnu to x32 (1)"
+ convert_test "$testname" "--compress-debug-sections=zlib-gnu --64" "-O elf32-x86-64"
+
+ set testname "Convert x86-64 object with zlib-gnu to x32 (2)"
+ convert_test "$testname" "--compress-debug-sections=zlib-gnu --64" "-O elf32-x86-64 --compress-debug-sections=zlib-gabi"
+
+ set testname "Convert x86-64 object with zlib-gnu to x32 (3)"
+ convert_test "$testname" "--compress-debug-sections=zlib-gnu --64" "-O elf32-x86-64 --decompress-debug-sections"
+
+ set testname "Convert x86-64 object to x32 (1)"
+ convert_test "$testname" "--nocompress-debug-sections --64" "-O elf32-x86-64"
+
+ set testname "Convert x86-64 object to x32 (2)"
+ convert_test "$testname" "--nocompress-debug-sections --64" "-O elf32-x86-64 --compress-debug-sections=zlib-gabi"
+
+ set testname "Convert x86-64 object to x32 (3)"
+ convert_test "$testname" "--nocompress-debug-sections --64" "-O elf32-x86-64 --compress-debug-sections=zlib-gnu"
+
+
+ set testname "Convert x32 object with zlib-gabi to x86-64 (1)"
+ convert_test "$testname" "--compress-debug-sections=zlib-gabi --x32" "-O elf64-x86-64"
+
+ set testname "Convert x32 object with zlib-gabi to x86-64 (2)"
+ convert_test "$testname" "--compress-debug-sections=zlib-gabi --x32" "-O elf64-x86-64 --compress-debug-sections=zlib-gnu"
+
+ set testname "Convert x32 object with zlib-gabi to x86-64 (3)"
+ convert_test "$testname" "--compress-debug-sections=zlib-gabi --x32" "-O elf64-x86-64 --decompress-debug-sections"
+
+ set testname "Convert x32 object with zlib-gnu to x86-64 (1)"
+ convert_test "$testname" "--compress-debug-sections=zlib-gnu --x32" "-O elf64-x86-64"
+
+ set testname "Convert x32 object with zlib-gnu to x86-64 (2)"
+ convert_test "$testname" "--compress-debug-sections=zlib-gnu --x32" "-O elf64-x86-64 --compress-debug-sections=zlib-gabi"
+
+ set testname "Convert x32 object with zlib-gnu to x86-64 (3)"
+ convert_test "$testname" "--compress-debug-sections=zlib-gnu --x32" "-O elf64-x86-64 --decompress-debug-sections"
+
+ set testname "Convert x32 object to x86-64 (1)"
+ convert_test "$testname" "--nocompress-debug-sections --x32" "-O elf64-x86-64"
+
+ set testname "Convert x32 object to x86-64 (2)"
+ convert_test "$testname" "--nocompress-debug-sections --x32" "-O elf64-x86-64 --compress-debug-sections=zlib-gabi"
+
+ set testname "Convert x32 object to x86-64 (3)"
+ convert_test "$testname" "--nocompress-debug-sections --x32" "-O elf64-x86-64 --compress-debug-sections=zlib-gnu"
+ }