-# Copyright (C) 1994-2016 Free Software Foundation, Inc.
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
global tempfile
global copyfile
- if {![binutils_assemble $srcdir/$subdir/${srcfile} tmpdir/bintest.o]} then {
- perror "unresolved $testname"
+ if {![binutils_assemble $srcdir/$subdir/${srcfile} $tempfile]} then {
unresolved "objcopy ($testname)"
+ remote_file host delete $tempfile
return
}
# files in the first place, and may order things a little
# differently. Those systems should use setup_xfail here.
- setup_xfail "h8300-*-coff"
- setup_xfail "h8500-*-rtems*" "h8500-*-coff"
setup_xfail "hppa*-*-*"
- setup_xfail "i960-*"
- setup_xfail "m68*-*-*coff" "m68*-*-hpux*" "m68*-*-lynxos*"
- setup_xfail "m68*-*-sysv*" "m68*-apple-aux*"
setup_xfail "m8*-*"
setup_xfail "sh-*-coff*"
- setup_xfail "tic80-*-*" "w65-*"
+ setup_xfail "tic80-*-*"
clear_xfail "hppa*64*-*-hpux*" "hppa*-*-linux*" "hppa*-*-lites*"
clear_xfail "hppa*-*-*n*bsd*" "hppa*-*-rtems*" "*-*-*elf*"
- clear_xfail "m68*-*-sysv4*"
if [string equal "" $exec_output] then {
pass "objcopy ($testname)"
objcopy_test "simple copy" bintest.s
-# Test reversing bytes in a section.
-
-set reversed ${tempfile}-reversed
-set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -j .data --reverse-bytes=4 $tempfile $reversed"]
+if { [file exists $tempfile] } {
+ # Test reversing bytes in a section.
-if ![string equal "" $got] then {
- fail "objcopy --reverse-bytes"
-} else {
- if [is_remote host] {
- remote_upload host ${reversed} tmpdir/copy-reversed.o
- set reversed tmpdir/copy-reversed.o
+ set reversed ${tempfile}-reversed
+ set sect_names [get_standard_section_names]
+ if { $sect_names != "" } {
+ set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -j [lindex $sect_names 1] --reverse-bytes=4 $tempfile $reversed"]
+ } else {
+ set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -j .data --reverse-bytes=4 $tempfile $reversed"]
}
- set origdata [binutils_run $OBJDUMP "$OBJDUMPFLAGS -s -j .data $tempfile"]
- set revdata [binutils_run $OBJDUMP "$OBJDUMPFLAGS -s -j .data $reversed"]
+ if ![string equal "" $got] then {
+ fail "objcopy --reverse-bytes"
+ } else {
+ if [is_remote host] {
+ remote_upload host ${reversed} tmpdir/copy-reversed.o
+ set reversed tmpdir/copy-reversed.o
+ }
- set want "^ \[0-9\]+ (\[0-9\]+)"
- set found_orig [regexp -lineanchor $want $origdata -> origdata]
- set found_rev [regexp -lineanchor $want $revdata -> revdata]
+ set origdata [binutils_run $OBJDUMP "$OBJDUMPFLAGS -s -j .data $tempfile"]
+ set revdata [binutils_run $OBJDUMP "$OBJDUMPFLAGS -s -j .data $reversed"]
- if {$found_orig == 0 || $found_rev == 0} then {
- # som doesn't have a .data section
- setup_xfail "hppa*-*-hpux*"
- clear_xfail "hppa*64*-*-hpux*"
+ set want "^ \[0-9\]+ (\[0-9\]+)"
+ set found_orig [regexp -lineanchor $want $origdata -> origdata]
+ set found_rev [regexp -lineanchor $want $revdata -> revdata]
- fail "objcopy --reverse-bytes"
- } else {
- scan $origdata "%2x%2x%2x%2x" b1 b2 b3 b4
- scan $revdata "%2x%2x%2x%2x" c4 c3 c2 c1
+ if {$found_orig == 0 || $found_rev == 0} then {
+ # som doesn't have a .data section
+ setup_xfail "hppa*-*-hpux*"
+ clear_xfail "hppa*64*-*-hpux*"
+
+ fail "objcopy --reverse-bytes"
+ } else {
+ scan $origdata "%2x%2x%2x%2x" b1 b2 b3 b4
+ scan $revdata "%2x%2x%2x%2x" c4 c3 c2 c1
- if {$b1 == $c1 && $b2 == $c2 && $b3 == $c3 && $b4 == $c4} then {
- pass "objcopy --reverse-bytes"
- } else {
- fail "objcopy --reverse-bytes"
- }
+ if {$b1 == $c1 && $b2 == $c2 && $b3 == $c3 && $b4 == $c4} then {
+ pass "objcopy --reverse-bytes"
+ } else {
+ fail "objcopy --reverse-bytes"
+ }
+ }
}
}
# Test generating S records.
-# We make the srec filename 8.3 compatible. Note that the header string
-# matched against depends on the name of the file. Ugh.
-
-if [is_remote host] {
- set srecfile copy.sre
- set header_string S00B0000636F70792E737265C1
-} else {
- set srecfile ${copyfile}.srec
- set header_string S0130000746D706469722F636F70792E7372656397
-}
+if { [file exists $tempfile] } {
+ # We make the srec filename 8.3 compatible. Note that the header string
+ # matched against depends on the name of the file. Ugh.
-set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -O srec $tempfile ${srecfile}"]
-
-if ![string equal "" $got] then {
- fail "objcopy -O srec"
-} else {
if [is_remote host] {
- remote_upload host ${srecfile} tmpdir/copy.srec
- set srecfile tmpdir/copy.srec
+ set srecfile copy.sre
+ set header_string S00B0000636F70792E737265C1
+ } else {
+ set srecfile ${copyfile}.srec
+ set header_string S0130000746D706469722F636F70792E7372656397
}
- set file [open ${srecfile} r]
- # The first S record is fixed by the file name we are using.
- gets $file line
- send_log "$line\n"
- verbose $line
- if ![regexp "$header_string.*" $line] {
- send_log "bad header\n"
+ set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -O srec $tempfile ${srecfile}"]
+
+ if ![string equal "" $got] then {
fail "objcopy -O srec"
} else {
- while {[gets $file line] != -1 \
- && [regexp "^S\[123\]\[0-9a-fA-F\]+\[\r\n\]*$" $line]} {
- send_log "$line\n"
- verbose $line
- set line "**EOF**"
+ if [is_remote host] {
+ remote_upload host ${srecfile} tmpdir/copy.srec
+ set srecfile tmpdir/copy.srec
}
+ set file [open ${srecfile} r]
+
+ # The first S record is fixed by the file name we are using.
+ gets $file line
send_log "$line\n"
verbose $line
- if ![regexp "^S\[789\]\[0-9a-fA-F\]+\[\r\n\]*$" $line] then {
- send_log "bad trailer\n"
+ if ![regexp "$header_string.*" $line] {
+ send_log "bad header\n"
fail "objcopy -O srec"
} else {
- if {[gets $file line] != -1} then {
- send_log "garbage at end\n"
+ while {[gets $file line] != -1 \
+ && [regexp "^S\[123\]\[0-9a-fA-F\]+\[\r\n\]*$" $line]} {
send_log "$line\n"
verbose $line
+ set line "**EOF**"
+ }
+ send_log "$line\n"
+ verbose $line
+ if ![regexp "^S\[789\]\[0-9a-fA-F\]+\[\r\n\]*$" $line] then {
+ send_log "bad trailer\n"
fail "objcopy -O srec"
} else {
- set got [binutils_run $OBJDUMP "$OBJDUMPFLAGS -f ${srecfile}"]
- if ![regexp "file format srec" $got] then {
- send_log "objdump failed\n"
+ if {[gets $file line] != -1} then {
+ send_log "garbage at end\n"
+ send_log "$line\n"
+ verbose $line
fail "objcopy -O srec"
} else {
- pass "objcopy -O srec"
+ set got [binutils_run $OBJDUMP "$OBJDUMPFLAGS -f ${srecfile}"]
+ if ![regexp "file format srec" $got] then {
+ send_log "objdump failed\n"
+ fail "objcopy -O srec"
+ } else {
+ pass "objcopy -O srec"
+ }
}
}
}
- }
- close $file
+ close $file
+ }
}
# Test setting and adjusting the start address. We only test this
set res [build_wrapper testglue.o]
set flags { debug }
- if { [istarget *-*-uclinux*] && ![istarget tic6x-*-*] } {
+ if { [istarget *-*-uclinux*] && ![istarget tic6x-*-*] && ![istarget arm*-*-uclinuxfdpiceabi] } {
return 1
}
setup_xfail "*-*-*"
}
- # This also fails for mips*-*-elf targets. See elf32-mips.c
+ # This also fails for some mips targets. See elf32-mips.c
# mips_elf_sym_is_global.
- setup_xfail "mips*-*-elf"
+ if { [is_bad_symtab] } then {
+ setup_xfail "*-*-*"
+ }
- setup_xfail "arm*-*-coff"
setup_xfail "arm*-*-pe"
setup_xfail "*-*-mingw*"
setup_xfail "*-*-cygwin*"
}
# Tests that in a debug only copy of a file the sections
-# headers whoes types have been changed to NOBITS still
+# headers whose types have been changed to NOBITS still
# retain their sh_link fields.
proc keep_debug_symbols_and_check_links { prog flags test } {
}
}
+proc objcopy_test_elf_common_symbols {} {
+ global srcdir
+ global subdir
+
+ # hpux has a non-standard common directive.
+ if { [istarget "*-*-hpux*"] } then {
+ return
+ }
+
+ set test_list [lsort [glob -nocomplain $srcdir/$subdir/common-*.d]]
+ foreach t $test_list {
+ # We need to strip the ".d", but can leave the dirname.
+ verbose [file rootname $t]
+ run_dump_test [file rootname $t]
+ }
+}
+
# ia64 specific tests
if { ([istarget "ia64-*-elf*"]
|| [istarget "ia64-*-linux*"]) } {
# ELF specific tests
if [is_elf_format] {
objcopy_test_symbol_manipulation
+ objcopy_test_elf_common_symbols
objcopy_test "ELF unknown section type" unknown.s
objcopy_test_readelf "ELF group" group.s
objcopy_test_readelf "ELF group" group-2.s
objcopy_test_readelf "ELF group" group-3.s
objcopy_test_readelf "ELF group" group-4.s
+ objcopy_test_readelf "GNU_MBIND section" mbind1.s
run_dump_test "group-5"
run_dump_test "group-6"
+ run_dump_test "group-7a"
+ run_dump_test "group-7b"
+ run_dump_test "group-7c"
run_dump_test "copy-1"
run_dump_test "note-1"
+ if [is_elf64 tmpdir/bintest.o] {
+ run_dump_test "note-2-64"
+ run_dump_test "note-3-64"
+ run_dump_test "note-4-64"
+ } else {
+ run_dump_test "note-2-32"
+ run_dump_test "note-3-32"
+ run_dump_test "note-4-32"
+ }
}
run_dump_test "copy-2"
run_dump_test "strip-8"
run_dump_test "strip-9"
run_dump_test "strip-12"
- # Non-EABI ARM targets will set OSABI to ARM
- # The V850 sets the OSABI to UNIX - System V
- if { ![istarget "*-*-hpux*"]
- && ![istarget "msp*-*-*"]
- && ![istarget "visium-*-*"]
- && ![istarget "v850*-*-*"]
- && !([istarget "arm*-*-*"] && ![istarget "arm-*-*eabi*"])} {
+
+ if { [istarget "mips64*-*-openbsd*"] } {
+ set reloc_format mips64
+ } elseif { [istarget "arm-*"] \
+ || [istarget "d10v-*"] \
+ || [istarget "dlx-*"] \
+ || [istarget "i*86-*"] \
+ || [istarget "m681*-*"] \
+ || [istarget "m68hc1*-*"] \
+ || ([istarget "mips*-*"] \
+ && ![istarget "mips64*-ps2-elf*"] \
+ && ![istarget "*-*-irix6*"] \
+ && ![istarget "mips64*-*-freebsd*"] \
+ && ![istarget "mips64*-*-kfreebsd*-gnu"] \
+ && ![istarget "mips64*-*-linux*"]) \
+ || [istarget "score*-*"] \
+ || [istarget "xgate-*"] } {
+ set reloc_format rel
+ } else {
+ set reloc_format rela
+ }
+ run_dump_test "strip-13" [list [list source strip-13${reloc_format}.s]]
+ # Select a relocation number that corresponds to one actually
+ # supported by the target and ABI being tested.
+ if { [istarget "aarch64*-*"] } {
+ set reloc 259
+ } elseif { [istarget "ia64*-*"] \
+ || [istarget "m32r*-*"] \
+ || [istarget "nds32*-*"] \
+ || [istarget "v850*-*"] } {
+ set reloc 50
+ } elseif { [istarget "pru-*"] } {
+ set reloc 11
+ } else {
+ set reloc 1
+ }
+ run_dump_test "strip-14" [list \
+ [list source strip-14${reloc_format}.s] \
+ [list as "--defsym RELOC=${reloc}"] \
+ [list as [expr {[is_elf64 tmpdir/bintest.o] \
+ ? "--defsym ELF64=1" : ""}]]]
+ run_dump_test "strip-15" [list \
+ [list source strip-15${reloc_format}.s] \
+ [list as "--defsym RELOC=${reloc}"] \
+ [list as [expr {[is_elf64 tmpdir/bintest.o] \
+ ? "--defsym ELF64=1" : ""}]]]
+
+ # This requires STB_GNU_UNIQUE support with OSABI set to GNU.
+ if { [supports_gnu_unique] } {
run_dump_test "strip-10"
}
- set extra_strip11 ""
- if { [istarget "sh64*-*"] } {
- # pr17755 testcase
- set extra_strip11 { { "as" "--isa=SHmedia --abi=64" } }
- }
- run_dump_test "strip-11" $extra_strip11
+ run_dump_test "strip-11"
if { [istarget "i*86-*"] || [istarget "x86_64-*-*"] } {
# Check to make sure we don't strip a symbol named in relocations.
# The symbol table for some MIPS targets is sorted differently than
# the ELF canonical order, so the regexps in localize-hidden-1.d fail
- # to match. These tests must be matched to targets for which
- # targ_defvec=mips_elf32_be_vec,
- # targ_defvec=mips_elf32_le_vec,
- # targ_defvec=mips_elf32_n_be_vec or
- # targ_defvec=mips_elf32_n_le_vec in config.bfd. When syncing,
- # don't forget that earlier case-matches trump later ones.
- if { ![istarget "mips*-sde-elf*"] && ![istarget "mips*-mti-elf*"]
- && ![istarget "mips*-img-elf*"]
- && ![istarget "mips64*-*-openbsd*"] } {
- setup_xfail "mips*-*-irix5*" "mips*-*-irix6*" "mips*-*-elf*" \
- "mips*-*-rtems*" "mips*-*-windiss" "mips*-*-none" \
- "mips*-*-openbsd*" "mips*-*-chorus*"
+ # to match.
+ if { [is_bad_symtab] } then {
+ setup_xfail "*-*-*"
}
run_dump_test "localize-hidden-1"
run_dump_test "testranges"
run_dump_test "exclude-1a"
run_dump_test "exclude-1b"
+
+ run_dump_test "only-section-01"
+ run_dump_test "remove-section-01"
+
+ # Test the remove relocation functionality
+ set test_list [lsort [glob -nocomplain $srcdir/$subdir/remove-relocs-*.d]]
+ foreach t $test_list {
+ # We need to strip the ".d", but can leave the dirname.
+ verbose [file rootname $t]
+ run_dump_test [file rootname $t]
+ }
}
run_dump_test "localize-hidden-2"
pass $test
}
+# The AArch64 and ARM targets preserve mapping symbols
+# in object files, so they will fail this test.
+setup_xfail aarch64*-*-* arm*-*-*
+
objcopy_test_without_global_symbol